Simply the Best!Simply the Best!

End CapsEnd CapsThe fi berglass reinforcedThe fi berglass reinforcednylon end caps providenylon end caps providefriction free operation even in friction free operation even in subzero temperatures. Lasts subzero temperatures. Lasts longer than bearings because longer than bearings because they’re not affected by salt, they’re not affected by salt, moisture or grit.moisture or grit.

Bungee CordBungee CordThe orange and black The orange and black polypropylene truckers’ rope polypropylene truckers’ rope has a bungee cord with a ring has a bungee cord with a ring attached so it doesn’t need to attached so it doesn’t need to be tied off.be tied off.

SpringThe Spring is The Spring is plated to resist plated to resist corrosion and corrosion and has a lifetime has a lifetime guarantee.guarantee.

Side FlapsVinyl Side Flaps are Vinyl Side Flaps are available for all tarps.available for all tarps.

GrommetsCome standardon all tarps.

Braided LoopBraided Loopgoes through the goes through the webbing loop to webbing loop to prevent hanging up prevent hanging up when pulling over when pulling over the tailgate. the tailgate.

GalvanizedGalvanizedRoller TubeRoller TubeEasily remove or Easily remove or install any tarp. Tarp install any tarp. Tarp slides in and out of slides in and out of the groove on the the groove on the roller tube.roller tube.

New Teardrop New Teardrop Pullbar PullbarTarp slides in groove Tarp slides in groove and wraps around our and wraps around our new pullbar design.new pullbar design.

Standard Arm TubingStandard Arm TubingArms made of common fence pipe Arms made of common fence pipe or aluminum tubing. Allows for or aluminum tubing. Allows for inexpensive repairs in the fi eldinexpensive repairs in the fi eld

Urethane BushingsUrethane BushingsProvide smooth Provide smooth operation, absorb operation, absorb shock and are not shock and are not affected by salt, affected by salt, moisture, or grit.moisture, or grit.

Mounting PlateSteel Mounting Plate is bolted to aluminum bodies and can be welded or bolted to steel bodies.

Rope Storage HooksRope Storage Hooksare provided for front are provided for front and rear rope storage. and rear rope storage. Zinc plated steel or Zinc plated steel or aluminum.aluminum.

Retrofi t Kit ElbowsRetrofi t Kit ElbowsUpgrade your existing Pulltarps Upgrade your existing Pulltarps

System without having to remove System without having to remove the tarpthe tarp

UrethaneUrethaneBumpersBumpersAlign tarp and Align tarp and protect the protect the bodybody

For questions or to place an order, contact HAWKEYE TRUCK EQUIPMENT at 515-289-1755 or 1-800-622-8223.

Standard Pulltarps® Systems can be easily ordered or converted to Manual Arm Kits. The Manual Arms mount to the side of the body and lift your tarp over the load. Economical and easy to use, Manual Arms are great for heaped loads like trash, shrubbery and demolition. All moving parts guaranteed* for as long as you own it.

Teardrop TechnologyThe tarp Hem Tube slides into the Universal Teardrop Pullbar in order to eliminate bunching and stress on the stitching. The Urethane bumpers are then fastened to the teardrop pullbar to keep the tarp centered and reduce noise.

Manual Arm Kits

Manual Arm KitWhen a Manual Arm Kit is purchased as a complete kit with housing and tarp, the tarp slides into a groove in the pullbar tocreate less stress on the tarp and reduce wearand tear.

Common Kit Features: • Available in Steel or Aluminum Arms • No tarp modifi cation necessary • Can deploy tarps up to 22’

Description Part Number22’ Steel Manual Arm Kit Straight Arms Part # 113-221422’ Steel Manual Arm Kit Bent Arms Part # 113-221522’ Aluminum Manual Arm Kit Straight Arms Part # 113-222422’ Aluminum Manual Arm Kit Bent Arms Part # 113-2225

Straight Arms

Bent Arms

Standard Pulltarps® Systems can be easily ordered or converted to Manual Arm Kits. The Manual Arms mount to the side of the body and lift your tarp over the load. Economical and easy to use, Manual Arms are great for heaped loads like trash, shrubbery and demolition. All moving parts guaranteed* for as long as you own it.

Teardrop TechnologyThe tarp Hem Tube slides into the Universal Teardrop Pullbar in order to eliminate bunching and stress on the stitching. The Urethane bumpers are then fastened to the teardrop pullbar to keep the tarp centered and reduce noise.

Manual Arm KitWhen a Manual Arm Kit is purchased as a complete kit with housing and tarp, the tarp slidesinto a groove in the pullbar tocreate less stress on theess on the tarp and reducee wearand tear.

Common Kit Features: • Available in Steel or Aluminum Arms • No tarp modifi cation necessary • Can deploy tarps up to 22’

pDescription Part Number22’ Steel Manual Arm Kit Straight Arms Part # 113-221422’ Steel Manual Arm Kit Bent Arms Part # 113-221522’ Aluminum Manual Arm Kit Straight Arms Part # 113-222422’ Aluminum Manual Arm Kit Bent Arms Part # 113-2225

Straight Arms

Bent Arms

Stock Housing Widths 80”, 84”, 87”, 89”, 93”, 96”, & 100”

Manual Arm Kits Work with All Pulltarps Housings

Steel Protector Pulltarps® SystemDesigned to be mounted against the cab shield so material will roll off into box. Galvanized end plates and housing protect against corrosion.

9” Open Pulltarps® System Most basic system offered. Good for applications where wind and falling debris are not a problem.

7” Aluminum Pulltarps® SystemDesigned for weight saving applications. Comes complete with windguard.

8.5” Super Shield Pulltarps® SystemRadiused for strength, the 12 gauge steel constructed housing offers the best protection from falling debris. Powder coated housing to resist corrosion.

X-Pando Pulltarps® SystemSuper tough X-Pando housing that uses telescoping technology to fit any truck from 78” to 102”.

Protector Plus Pulltarps® SystemDesigned for longer applications that require some protection from falling debris. Available in Steel.

Universal Super Shield Pulltarps® SystemSuper strong system with higher tarp capacity. The fully welded 12 gauge steel construction offers the best protection from falling debris.

Ultimate Aluminum Pulltarps® SystemDesigned for truck enthusiasts who want their tarp system to look as good as their rig.

Part # 106-0215

Part # 105-0215

Part # 103-0215 Part # 107-0215

Part # 116-3017

Part # 108-0215

Part # 109-0215Part # 114-0215

Stock Housing Widths 80”, 84”, 87”, 89”, 93”, 96”, & 100”

Manual Arm Kits Work with All Pulltarps HousingsManual Arm Kits Work with All Pulltarps Housings

Steel Protector Pulltarps® SystemDesigned to be mounted against the cab shield so material will roll off into box. Galvanized end plates and housing protect against corrosion.

9” Open Pulltarps® SystemMost basic system offered. Good forapplications where wind and falling debris are not a problem.

7” Aluminum Pulltarps® SystemDesigned for weight saving applications.Comes complete with windguard.

8.5” Super Shield Pulltarps® SystemRadiused for strength, the 12 gauge steel constructed housing offers the best protectionfrom falling debris. Powder coated housing to resist corrosion.esist corrosion.

X-Pando Pulltarps® SystemSuper tough X-Pando housing that uses telescoping technology to fi t any truck from 78” to 102”.

Protector Plus Pulltarps® SystemDesigned for longer applications that require some protection from falling debris. Available in Steel.

Universal Super Shield Pulltarps® SystemSuper strong system with higher tarp capacity.The fully welded 12 gauge steel construction offers the best protection from falling debris.

Ultimate Aluminum Pulltarps® SystemDesigned for truck enthusiasts who want their tarp system to look as good as their rig.

Part # 106-0215

Part # 105-0215

Part # 103-0215 5Part # 107-0215

7Part # 116-3017

5Part # 108-0215

5Part # 109-0215Part # 114-0215

Accessories

Tarp TamerWhen your system is mounted above the side rails the Tarp Tamer’s fixed roller holds the front of the tarp down to prevent material from blowing out. The Tarp Tamer can be used with Pulltarps®, Manual Arms, and Automatic Arm systems. Part # 501-0701

Bent Arm ExtensionsBent arms will stay out of harms way while loading. This will increase the life of your tarp system’s arms. Bent Extensions can be added to straight arms as an upgrade. Bent Extensions are available in 35° bends.35° Extension Part # 501-1230

Arm CatchersArm Catchers provide a cradle for the arms to rest in. A small lip in the Arm Catcher snaps the arms in place. This stops the arms from bouncing while in transit and further reduces noise.Part # 501-1247

Step 1.Unwrap the rope from the rope hooks on the front of the truck.

Next flip the rope over the corner of the truck body.

Step 2.Using the rope, pull the arms up and over the load. After

deploying the tarp secure the rope to the rope hooks at the rear of

the truck body.

Step 3.To retract, untie the rope and pullthe rope around the corner of the truck body. Start the arms back

by hand until the spring tension in the roller takes over to retract the

tarp all the way.

How To Operate Manual Arm Systems

Simply the Best!

Made in The U.S.A.

6/8/10

AccessoriesAccessories

Tarp TamerWhen your system is mounted abovethe side rails the Tarp Tamer’s fixedroller holds the front of the tarp downto prevent material from blowingout. The Tarp Tamer can be used with Pulltarps®, Manual Arms, and Automatic Arm systems.Part # 501-0701

Bent Arm ExtensionsBent arms will stay out of harms waywhile loading. This will increase thelife of your tarp system’s arms. BentExtensions can be added to straightarms as an upgrade. Bent Extensionsare available in 35° bends.35° Extension Part # 501-1230

Arm CatchersArm Catchers provide a cradle forthe arms to rest in. A small lip in the Arm Catcher snaps the arms in place. This stops the arms frombouncing while in transit and furtherreduces noise.Part # 501-1247

Step 1.Step 1Unwrap the rope from the ropehooks on the front of the truck.

Next flip the rope over the cornerof the truck body.

Step 2.Step 2Using the rope, pull the arms up and over the load. After

deploying the tarp secure the ropeto the rope hooks at the rear of

the truck body.

Step 3.Step 3To retract, untie the rope and pullthe rope around the corner of thetruck body. Start the arms back

by hand until the spring tension inthe roller takes over to retract the

tarp all the way.

How To Operate Manual Arm SystemsHow To Operate Manual Arm Systems

Simply the Best!

Made in The U.S.A.

6/8/10

Wt

t

wA

For questions or to place an order, contact HAWKEYE TRUCK EQUIPMENT at 515-289-1755 or 1-800-622-8223.