parker pneumatic

48

Upload: joelmencia

Post on 27-Oct-2014

147 views

Category:

Documents


4 download

TRANSCRIPT

Page 1: Parker Pneumatic
GR941312
Chassin Conexiones Tel. (461) 615 59 10 Atn Ing. Alberto Hernández Chasin
Page 2: Parker Pneumatic

© Copyright 2004, Parker Hannifin Corporation. All rights reserved.

IntroductionParker Hannifin Corporation ......................................................................................................... 1Pneumatic Products and Systems ................................................................................................ 2Value Added Programs ................................................................................................................. 4Pneumatic Components Overview................................................................................................ 6

Product RangePneumatic Cylinders and SlidesCompact ....................................................................................................................................... 8Round Body ................................................................................................................................ 10Tie Rod ....................................................................................................................................... 11Cylinder/Valve Combination ........................................................................................................ 13Rodless ...................................................................................................................................... 14Guided Cylinders/Linear Slides ................................................................................................... 15

Complementary Products3/TK Series Air Oil Tanks ............................................................................................................ 17Industrial Shock Absorbers ......................................................................................................... 17

Rotary ActuatorsVane Style .................................................................................................................................. 18Rack and Pinion Style ................................................................................................................. 19

Multi-Axis Systems ...................................................................................................... 20

Grippers ............................................................................................................................... 21

Pneumatic ValvesSolenoid Operated ...................................................................................................................... 23Electro-Pneumatic ...................................................................................................................... 27Proportional Regulators .............................................................................................................. 28Manual, Mechanical and Air Logic .............................................................................................. 29Valve Accessories ...................................................................................................................... 31

Pressure Sensors .......................................................................................................... 33

Vacuum ProductsVacuum Generators .................................................................................................................... 34Vacuum Cups ............................................................................................................................. 35

Air Preparation Units .................................................................................................. 36

IPS Structural Framing Systems ........................................................................ 37

Pneumatic Fittings, Tubing and HoseBrass Fittings .............................................................................................................................. 38Tube Fittings ............................................................................................................................... 39Thermoplastic Products .............................................................................................................. 40Rubber Hose Products ............................................................................................................... 41Quick Couplings ......................................................................................................................... 42

InformationSales Offices .................................................................................................................... 43

Contact Information .................................................................................................... 44

CD Catalog ......................................................................................................................... 45

Use the CD search codes providedin this catalog to go directly to thesection for that product.

Use the web addresses, www.parker.com/pneu/provided with each product to go directly to thatproduct or series on the Parker website.zx99

Page 3: Parker Pneumatic

1

Engineering Expertise

Worldwide Network ofDistributors

Premier CustomerService

Parker Hannifin Corporation

Parker Hannifin is a Fortune 300 corporation listed on theNew York Stock Exchange as PH. Parker is the leading globalmanufacturer with the widest variety of components andsystems designed to control motion, flow and pressure in alltypes of machinery and equipment.

Parker offers over 1,400 productlines that control motion in 1,000mobile, industrial and aerospacemarkets. We are the only manu-facturer to offer our customers achoice of hydraulic, pneumatic,electromechanical and computermotion control solutions. And wehave the largest global distribu-tion network in our field, withover 7,500 distributors servingmore than 422,000 customers.

Parker products are foundeverywhere: in orbitingsatellites, machine tools, truckequipment, hospitals and labora-tories, oil rigs and refineries...anywhere machines depend onmotion control.

ISO CompliantManufacturing

Page 4: Parker Pneumatic

2

Parker Hannifin is the leading global supplier of pneumaticcomponents and systems. Whether you need a single productdelivered down the street or a complete pneumatic systemsolution delivered anywhere in the world, Parker is yourone-stop resource.

Serving hundreds of automation marketswhere controlling motion, flow andpressure is required, Parker’s productsare engineered and manufactured toworld class standards and are backed byunparalleled customer service andtechnical field support. Parker is ideallypositioned to be your single sourcepneumatics supplier.

It All Starts With The ProductWhen it comes to products, Parker isthe most recognized name in the pneu-matics industry. With more than 80years of experience, Parker’s strongmarket presence results in engineeringand manufacturing expertise, and ahighly competent field sales and distri-bution network.

Extensive breadth of productallows us to provide unlimitedsolution possibilities. Ourworldwide network quicklydelivers your solution, includingthose built to order. Whetheryou need a pneumatic system, asub-system, or components,Parker delivers.

2

Pneumatic Products & Systems

Page 5: Parker Pneumatic

3

Engineering/ManufacturingExpertiseParker’s product engineering andmanufacturing capabilities form thecornerstone of everything we offer. Weutilize the latest computer-aided designand lean manufacturing technologyand processes to exceed today’sstringent demands for both quality anddelivery. Parker is ISO compliant andcontinues to invest in research anddevelopment, manufacturing technol-ogy, and people who are dedicated todelivering precision manufactured andinnovative products.

Total System SolutionsParker’s team of highly qualifiedapplications engineers, productdevelopment engineers and systemssolution specialists can turn a Parkerproduct solution into an integrated systemsolution. Parker can thoroughly evaluateyour application and provide thecomplete solution by integrating Parker’spneumatic, structural automation andeven electromechanical products. Withdecades of experience in automatedmotion and control across multipletechnologies, Parker is your single sourcefor the right solution.

Ordering a complete system from Parkerbrings with it all of the benefits you havecome to expect: quality, system integrityand ownership, worldwide distribution,extensive field support and customerservice. Add supplier reduction, reducedlead times, simplified ordering and moreefficient shipping and you’ll agree thatParker’s total system capabilities aredesigned with your application in mind.

Parker’s extensive web site is your online resource for pneumatic technology.It is the industry’s most comprehensive site and includes product information,downloadable catalogs, 3D CAD drawings, contact information, trainingmaterials, product selection software and RFQ capabilities. The user-friendlyinterface allows you to search by general product families, specific producttype, division, or keywords.

www.parker.com/pneumatics

Pneumatic Products & Systems

Page 6: Parker Pneumatic

4

Parker Hannifin strongly believes that value added pro-grams are just as important to our customers as breadth ofline and system solutions. In addition to assured productquality, Parker provides engineering assistance, electronicordering, customer training, on-time delivery, extensiveproduct information and consolidated shipments. Parker’sPremier Customer Service leads the industry in response;our employees are empowered to do whatever it takes toexceed customer expectations.

Pneumatic focused“Tech Team”Parker’s Tech Team is a dedicatedresource providing two valuableservices:

Machinery performance. Give ourTech Team a machine that does notmeet your cost, performance, orreliability objectives, and we will"re-skin" the machine with a solutionthat will meet or exceed yourexpectations. Full projectdocumentation is provided, reflectingimproved performance and reducedBill of Material and/or operating costs.

New Machine Design. No time orresources to design the pneumaticsystem on your new machine design?Our Tech Team will design, documentand deliver the optimal system the firsttime, with the lowest possible costs.

Value Added Programs

4

Page 7: Parker Pneumatic

5

5

Training

Field Sales

TrainingParker is the industry leader in thedevelopment and presentation oftechnical training for pneumatic andhydraulic technology. We offer com-plete and comprehensive texts andhands-on classroom opportunities forour employees, distributors andcustomers. This includes web-based,on-site and classroom training atvarious Parker locations.

Hundreds of colleges and universitiesin North America have adoptedParker’s textbooks as the foundationfor motion and control courses offeredat their institutions. Training supportmaterials include textbooks, instructorguides, computer-based training CDs,digital overheads on CD, final exams,drafting and simulation software, labmanuals and trainer stands.

Field Sales TeamParker’s highly trained field sales force,strategically located throughout theworld, provides knowledgeable assis-tance within hours. Linked by globalcommunication systems, these expertswill work together with a local Parkerdistributor on any product application tofulfill your needs.

PIN(Parker Integration Network)Networking over 100 system integrators,Parker’s PIN program combines leader-ship in motion control technology withspecific application design and buildingexpertise. PIN provides the customerwith one-stop problem solving; it enablesParker and its system integrators to act asa single, qualified team with local salesand distribution.

At www.parker.com/pin, you can locatea system integrator based on any numberof criteria, making it easy to locate thesystem integrator that best meets yourrequirements.

Pneumatic TechnologyCentersA Parker Pneumatic Technology Center isyour local one stop shop for all yourpneumatic automation needs. Thesecenters are staffed with specialists whocan provide engineering assistance,technical support and full systems servicefor all your pneumatic requirements.

PTCs were introduced by Parker in orderto meet the changing needs of our cus-tomers, while increasing the level ofservices provided by a Parker distributor.At PTCs you’ll find: advanced design andtechnology, local inventory, a staff ofapplication system engineers, trainingservices, value-added services and theindustry’s leading technical support.

Parker will extend its standard limited warranty to 60months for all pneumatic products when a properlyinstalled and maintained air preparation system is used,as supplied by Parker and/or its authorized PneumaticTechnology Center (PTC).

Value Added Programs

5 YearWarranty

Page 8: Parker Pneumatic

6

Parker offers one of the world’s most extensivepneumatic product lines. From control valvesto FRL’s, actuators, cylinders, pressuresensors, vacuum products,grippers and structural framing–Parker continues to refine anddevelop pneumatic componentsto provide its customer withinnovation, quality, deliveryand customer service.

Pneumatic Components Overview

6

CylindersParker pneumatic cylinders areengineered to meet ISO, NFPA andother standards, and they come in avariety of shapes (compact, round bodyand tie rod) and sizes (6-200 mm,⁵⁄₁₆-14" bores). Whether you need tomove a load fast or slow, in a straightline or through an arc, or even sensethe load’s position, Parker has acylinder for your application.

Pneumatic ValvesParker valves cover the broadest rangeof industrial market applications, from10 mm solenoid pilots for use in thesemiconductor market to 1½" ported,hi-flow 4-way valves for foundries andpaper mills. Utilizing technology suchas the WCS spool design, serial busand collective wiring electronics andspecialized machining and thermo-plastics, Parker offers value and qualityon the leading edge of technology.

Air Preparation UnitsParker is the industry leader in air prepa-ration. The Prep-Air II Series containsfilters, coalescing filters, standard andprecision regulators, filter/regulators andmist and micro-mist lubricators. ThePrep-Air II modular design provideseasy installation and maintenance withan aesthetically pleasing appearance.Accessories include lockout valves,manifold blocks, soft start/quick dumpvalves and pressure switches.

Flow Controls AccessoriesParker offers an array of flow controlsincluding needle, check, quick exhaust,shuttle and relief valves in sizes fromM5 to 1½". Flow controls are availablein various body and seal materials forthe most demanding applications.Right Angle flow controls are designedfor “close to the point use.” Low pro-file valves are ideal for space savingapplications. Additionally, Prestolokconnections are available for instantfitting access.

Page 9: Parker Pneumatic

7

Pneumatic Components Overview

GrippersParker’s grippers are designed toincorporate high grip force to weightratio, making them ideal for end of armtooling and high-speed applications.Grippers are available in parallel,angular and three jaw configurationwith grip forces to 3,000 lbs and featuresingle acting, double acting, springassist or spring return options.

Fluid ConnectorsParker offers the industry’s largestrange of fluid connector products forany pneumatic application. Breadth ofline includes brass and tube fittings,rubber hose products, thermoplasticproducts and quick couplings. Parker’sglobal distribution and service centersensure that you can get the connectorproducts you need when and where youneed them.

Rotary ActuatorsParker is the industry leader in PneumaticRotary Actuators with output torques from1 to 10,000 in-lbs. at 100 PSI. Configura-tions include rack and pinion and vaneand are available in both metric and impe-rial designs. Rotary Actuators are suitablefor lubricated and non-lubricated serviceand will produce millions of trouble-freecycles making them suitable for a widerange of pneumatic applications.

Guided CylindersPneumatic guided cylinders are avail-able in four unique designs with mul-tiple configurations suitable for anyapplication. Cylinder bore sizes rangefrom 16 to 100 mm and are available inboth metric and imperial designs. Parkerguided cylinders feature a patentedalignment coupler which allows thepiston rod to self-center providingmillions of trouble-free cycles.

Pressure SensorsSensors provide extended featuresbeyond the standard switch and allow forthe automatic monitoring of systemperformance. Parker pressure sensors areavailable in output ranges from opencollector transistor to 4-20ma feedbacks.Additionally, sensor display options caninclude Human Machine Interface forsystem maintenance.

Vacuum Generators/CupsTo compliment it’s pneumatic productofferings, Parker has a complete line ofvacuum generators and cups. Integratedsensors provide feedback for improvedsystem response time. Additionally,emergency stop systems hold partsduring electrical power loss to preventproduct/machine damage. Parker’sspace saving manifold systems andextensive cup availability provideunlimited automation solutions.

Page 10: Parker Pneumatic

8

The Tooling Plate option adds non-rotating and additional load carryingcapability to the extensive line offeatures provided by the standardP1M cylinder.• 12, 16, 20, 25, 32, 40, and 50 mm

bore sizes• Flexible porting• Industry interchangeable

P1M SeriesExtra Low ProfileCylinders

The P1M Swing Clamp optionoffers clamping capability to theextensive list of features associatedwith the P1M cylinder. This optionis ideal for clamping applicationsthat have limited space available.• 32, 40 and 50 mm bore sizes• 10, 20 and 50 mm stroke lengths• 90° clamp rotation• Rotation reversible in the field

P1M Tooling Plate

P1M Swing Clamp

Efficient, compact design for usewhen space is at a premium. Aunique internal transfer tubeprovides for single or dual endporting. Recessed magnetic pistonsensing switches fit flush with thecylinder body to economize spaceand simplify machine automation.

Pneumatic Cylinders & Slides

• 10 standard bore sizes from12 mm to 100 mm

• Stroke lengths customized to yourapplication

• Industry and VDMA mountinginterchanges

Compact

www.parker.com/pneu/p1m

www.parker.com/pneu/p1mtp

www.parker.com/pneu/p1msc

Page 11: Parker Pneumatic

9

LP/LPM SeriesLow Profile Cylinders

Low-profile, lightweight alumi-num cylinders fit tight spacerequirements. Non-lube service forpressures to 250 PSI.LPM Series offers a magneticpiston when piston positionsensing is required.• 8 standard bore sizes from

⁹⁄₁₆" to 4"• Strokes from ¹⁄₈" to 6"• 6 standard mounting styles

C05 SeriesBlock Style Cylinders

P1G SeriesCartridge Cylinders

Compact short stroke cylinders areideally suited for clamping orlocking applications in confinedareas.• 8, 12, 20, 32, 50 and 63 mm bore

sizes• Stroke lengths to 25 mm• Single-acting and double-acting

versions

Threaded body, cartridge stylecylinders provide space savings andflexibility.• 6, 10 and 16 mm bore sizes• Stroke lengths to 15 mm• Nickel plated body and stainless

steel piston rod constructionstandard

Pneumatic Cylinders & SlidesCompact

www.parker.com/pneu/LP

www.parker.com/pneu/c05

www.parker.com/pneu/p1g

Page 12: Parker Pneumatic

10

SRX SeriesStainless SteelBody Cylinders

SR/SRM & SRD/SRDMSeries Stainless SteelBody Cylinders

P1A SeriesMini-ISO Cylinders

The SRX Series cylinder incorpo-rates all of the proven features ofthe SR cylinder line with theaddition of an integrated MLRT toprovide accurate position feedbackin an economical package.

Cylinders include a 304 stainlesssteel body for space-saving, low-cost, high-performance operation inlight-duty applications. Single anddouble-acting cylinders are pre-lubed. Pressures to 250 PSI.• 12 standard bore sizes from

⁵⁄₁₆" to 3"• 28 mounting styles, full line of

mounting accessories

P1A Series cylinders are ideal forthe food, packaging and textileindustries. All P1A cylindersincorporate adjustable end cush-ions and magnetic pistons stan-dard. Other standard featuresinclude 304 stainless steel bodiesand piston rods and black anod-ized aluminum end caps forsuperior corrosion resistance.

Pneumatic Cylinders & Slides

The SRD/SRDM Series offersDelrin heads and caps for superiorcorrosion resistance.• 5 standard bore sizes from

⁹⁄₁₆"-2"• Stroke lengths to 32" standard• 2 mounting styles, custom to order

• 5 standard bore sizes from10-25 mm

• Stroke lengths from 20 to 500 mm• Conforms to ISO 6432 dimensional

specifications• Single and double-acting versions

available

• 1.06", 1.50", 2", 2.50" and 3.00"bore sizes

• 3 mounting styles• Highly accurate position feed-

back capability• Stroke lengths to 24"• Controllers available

Round Body

www.parker.com/pneu/sr

www.parker.com/pneu/srx

www.parker.com/pneu/p1a

Page 13: Parker Pneumatic

11

P1L SeriesHigh Performance,Repairable RoundBody Air Cylinders

P1L Series cylinders are sleek,round body cylinders featuringthreaded end caps for easy mainte-nance at either end. The P1L’s shortoverall length, versatile mountingfeatures and rugged bearing systemequip it for applications wheretraditional NFPA cylinders may betoo long, and where low profilecylinders may provide inadequatebearing support.

Pneumatic Cylinders & Slides

• 8 standard bore sizes from 20 to100 mm

• Stroke lengths to 1,000 mm• 9 standard mounting styles

S Series cylinders are available insingle and double acting versionsand are pre-lubricated to assurelong service life. Standard optionsinclude fixed cushions, lipsealpiston, and standard and oversizepiston rods.

S Series UniversalMidget Cylinders

• 200 PSI pneumatic service• 4 standard bore sizes from

³⁄₄" to 1¹⁄₄"• Stroke lengths to 12"• 5 standard mounting styles

Round Body

Pneumatic Cylinders & SlidesMiniature Tie Rod

www.parker.com/pneu/P1L

www.parker.com/pneu/s

Page 14: Parker Pneumatic

12

2MA with LinearPosition Feedback

2MNR Series

2A/2AN NFPA IndustrialTie Rod Style Cylinders

The 2MA with linear positionfeedback provides features whichassure reliable operation in manyareas of automation and processtechnology, even under extremelyambient conditions.

The 2MNR Series offers theaddition of non-rotating capabilityto the extensive list of provenfeatures associated with the 2MA.Built to withstand the high torsionloading, this cylinder comesstandard with two different toolingplate options with specials offeredby request.

Pneumatic Cylinders & Slides

• 7 standard bore sizes from2" to 8"

• Magneto-strictive feedbacktechnology

• Analog or digitaloutputs

• 11 standard mounting styles

• 6 standard bore sizes from1¹⁄₈" to 4"

• Single or double-rod versions• Built to any practical stroke length• 10 standard NFPA

mounting styles, plusbase bar mount

Pre-lubricated, durable steelconstruction cylinder rated to 250PSIG for the most demandingpneumatic applications. 2A/2ANcylinders offer 4 standard pistonrod end configurations as standardand are available with cushions,end of stroke position sensing,

linear position sensing and a fullline of mounting accessories.• 13 standard bore sizes from

1" to 14"• Rod sizes ¹⁄₂" to 5¹⁄₂" diameter• Built to any practical stroke length• 18 standard NFPA mounting styles

Lightweight aluminum constructionwith proven reliability. The 2MASeries is specifically designed tomeet the present demand for moreefficient, inexpensive linear forceand motion actuators. Standardoptions include adjustablecushions, bumper seals,fluorocarbon seals and stainlesssteel piston rods. Pressures to250 PSI.

2MA SeriesNon-Lube NFPAAir Cylinder

2MAE Series CleanPlus Cylinder

The 2MAE incorporates a high-technology polymer-based coating(LECTROFLUOR®) to providesuperior resistance to corrosion andchemical attack in hostile enviro-nment applications. Recommendedfor use where exposure to chemicalsor corrosive agents, and/or problemsof sanitary maintenance are critical.This includes food processing and

packaging equipment; in anyapplication as an alternative tochrome plating or stainless steel.• 5 standard bore sizes from

1-¹⁄₂" to 4"• USDA approval/FDA compliance• Broad chemical, abrasion and

wear resistance• 11 standard NFPA

mounting styles

Tie Rod

• 1¹⁄₄" to 9 standard bore sizes from1¹⁄₄" to 8"

• Single or double-rod versions• Strokes to any practical length• 17 standard NFPA mounting

styles• Hydraulic service

available

www.parker.com/pneu/2ma

www.parker.com/pneu/2mae

www.parker.com/pneu/2MA-LP

www.parker.com/pneu/2mnr

www.parker.com/pneu/2Aa

Page 15: Parker Pneumatic

13

P1D SeriesNon-Lube ISO Cylinders

Pneumatic Cylinders & Slides

The new P1D Series cylinders offera number of innovations that can beachieved only by using the bestpossible materials and design. Theresult is a complete family of ISO/VDMA cylinders with exceptionalperformance. The Standard versionoffers the most cost effectivesolution. The Removable Glandversion adds ease of repair andflexibility. The Clean version, withits positive geometry and hygienicdesign, offers a solution in wash-down environments where cleanli-ness is key. The Tie Rod versionoffers a more traditional approachthat can be utilized in multi-position cylinders.

• 10 standard mounting styles• 7 standard bore sizes from

32 to 125 mm• Four versions:

- Standard version (die castendcaps, composite piston)

- Removable Gland version- Clean version (positive

geometry/hygienic design)- Tie Rod version (traditional

tube and tie rod design)• Conforms to the ISO 6431/

VDMA 24562 standards• Rod locking device available

SA SeriesStainless SteelCylinders

The SA Series combines highstrength stainless steel with provenreliability. Specifically designed tomeet today’s demand for ruggedcorrosion resistant cylinders, it canbe used in harsh chemicalwashdown environments. Thiscylinder is also popular in the foodprocessing industry when cleanli-ness and a bacteria-free environ-ment is of most importance. Ratedto 250 PSIG.

• 9 standard bore sizes from1¹⁄₈" through 8"

• Eight standard mounting styles• Built to any practical stroke length• NFPA interchangeable

Tie Rod

Cylinder/ValveCombination

The ACVB cylinder/valve systemuses specially designed manifoldsto accommodate the Parker BSeries valves. The manifolds andvalves are field-adaptable tostandard NFPA cylinders. Flowcontrols are optional.

• For 2A, 2MA and MA cylinders• Fits 1¹⁄₄" to 5" bore cylinders• Two manifold styles• Three valve sizes• Pressures to 145 PSI

Pneumatic Cylinders & SlidesCylinder/ValveCombination

www.parker.com/pneu/sa

www.parker.com/pneu/p1d

www.parker.com/pneu/acvb

Page 16: Parker Pneumatic

14

P1Y SeriesRodless Cylinders

Pneumatic Cylinders & Slides

The P1Y Series rodless cylinder isan innovative design, built with thehighest quality components. Withits unique design, it provides amaximum amount of performance.With different mountings and shockabsorber options, the P1Y rodlesscylinder should suit even the mostdemanding applications.

• 25, 32 and 40 mm bore sizes• Available in strokes up to

7,000 mm• Wrap-around bearing for high

load bearing capability• Multi-ported for easy plumbing

The P1X Series compact rodlesscylinders feature a high loadcarrying capability coupled with anoval piston design to provide aband-style rodless cylinder thatmeets today’s aggressive perfor-mance requirements. In addition toits space saving features, the P1XSeries incorporates a variety ofoptions so that it can be applied tothe widest range of applications.

P1X SeriesRodless Cylinders

P1Z SeriesRodless Cylinders

HBBY SeriesRodless Cylinders

• 7 standard bore sizes from 16 to63 mm

• Built to stroke lengths of up to5 meters

• Optional adjustable stroke/shockabsorber option

• Magnetic piston and transferporting standard

The P1Z Series magneticallycoupled rodless cylinders feature amagnetic piston and carriage thatallow a rodless cylinder design withzero external leakage. Two versionsare available: the basic version inwhich the load must be externallyguided and a guided version thathas the guides built in.

• 3 standard bore sizes – 16, 20,and 32 mm

• Basic and guided versionsavailable

• Optional cushions and mountingstyles on basic version

• Optional magnetic piston sensingand transfer porting onguided version

The HBBY Series guided rodlesscylinders feature the P1Y Seriescylinders with a built-in gantrytable. Utilizing a free floatingconnection between the cylinderand the table, the HBBY Serieswill provide millions of troublefree cycles.

• 4 support rod sizes – 20, 25, 30,and 35 mm

• Extremely high load bearingcapability

• Composite and sealed ballbearings available

• Bumpers are standard

Rodless

www.parker.com/pneu/p1x

www.parker.com/pneu/p1y

www.parker.com/pneu/p1z

www.parker.com/pneu/hbby

Page 17: Parker Pneumatic

15

Series P5T 16 20 25 32 40 50 63 80 100

Bore size, mm 16 20 25 32 40 50 63 80 100

Maximum stroke, mm 100 125 150 200 200 200 200 200 200

Theoretical force, extend at 75 PSI (5 Bar), N 105 164 254 402 628 982 1559 2513 3927lb 23.6 36.8 57 93 146 228 362 584 913

Theoretical force, retract at 75 PSI (5 Bar), N 77.4 123 213.5 302 528 825 1492 2268 3574lb 17.4 27.8 48 70 123 192 326 527 856

P5T Series ShortStroke Thrusters

Pneumatic Cylinders & Slides

The P5T Short Stroke Thruster isdesigned for heavy duty, shortstroke applications where compactdesigns are necessary. Standardpiston wear bands and internalbumpers provide millions oftrouble-free cycles even in highspeed applications.

• Choice of composite bushings orrecirculating ball bearings

• Optional corrosion resistantshafting, side and rear porting,flow controls and fluorocarbonseals

• Mounts on two sides• Maximum operating pressure 10

bar (145 PSI)

Guided

P5L SeriesGuided Cylinders

The P5L Series Guided Cylindersare the most versatile metric guidedcylinders available with threeconfigurations and 8 bore sizes.The P5L series has a full range ofavailable options and the highestload capacities available. The P5Lis driven with the new round body,repairable P1L cylinder.

• Thrust, reach and base versions• Optional shock absorbers,

cushions, bumpers, micro adjust-ers, flow controls and multiplesensor options

• Through hole and fully adjustableT-slot mounting

• Direct mounting between thrust,reach and base versions

• Maximum operating pressure10.3 Bar (150 PSI)

Series P5L 20 25 32 40 50 63 80 100

Bore size (mm) 20 25 32 40 50 63 80 100

Max. suggested stroke (mm) 400 400 450 550 750 900 1000 1000(inch) 15.7 15.7 17.7 21.7 29.5 35.4 39.4 39.4

Theoretical force, extend at 80 PSI (lb) 39 61 100 156 243 386 623 974

Theoretical force, retract at 80 PSI (lb) 33 51 86 131 204 348 562 874

www.parker.com/pneu/p5t

www.parker.com/pneu/P5L

Page 18: Parker Pneumatic

16

• Thrust, reach and base styles• Choice of NFPA or ISO cylinder• Composite bushings or linear ball

bearings• Optional sensors, oversized

shafting, shock absorbers, cylin-der cushions, external bumpers,adjustable stop collars, flowcontrols, fluorocarbon seals,3-position cylinders, cylinderrod lock

• Mounts on three sides• Maximum operating pressure

10.3 Bar (150 PSI)

Series HB 15 20 25

Bore size (NFPA cylinder), inch 1½ 2 2½(ISO cylinder), mm 40 50 63

Maximum suggested stroke , inch - HBN 6 6 8HBC 8 10 12HBT 24 30 36

HBR/HBB 30 36 42

Theoretical force, extend at 80 PSI, lb 142 251 393

Theoretical force, retract at 80 PSI, lb 117 226 368

HB Series Heavy DutyGuided Cylinders

Pneumatic Cylinders & Slides

The HB Series Guided Cylindersare available in six configurationsand three bore sizes. With acomplete line of options and loadcapacities to 1100 lbs, the HBSeries solves most any demandingguided cylinder application. A newoption now includes a base versiondriven by the P1Y rodless cylinderthat is ideal for applications inwhich space is a premium.(See page 14.)

Guided

www.parker.com/pneu/hb

• 12, 16, 20 and 25 mm bore sizes• Optional internally or externally

mounted Shock Absorbers andBumpers

• Optional end of Stroke Lock• Mid Position Stop creating a

three position unit• 0.03 mm repeatability• Strokes to 250 mm• Maximum Operating Pressure

P5S-P Series PrecisionSlide Table

The P5S-P Series double bore,precision slide table incorporates4 sets to stainless steelrecirculating bearings on two guiderails to provide for maximumrepeatability and minimaldeflection. Stroke adjusters withintegral bumpers or shockabsorbers can be mounted underthe moving carriage or externallyalong side of the slide table.

www.parker.com/pneu/p5sp

Page 19: Parker Pneumatic

17

3TK SeriesAir/Oil Tanks

Industrial ShockAbsorbers

Converts shop air pressure intohydraulic pressure. The economyand availability of compressed airis combined with the precisecontrol of hydraulics. The internalbaffling system prevents themixing of the air and oil to insurecontrol and reliable service. Thefiberglass tube allows easy moni-toring of oil levels.

• Six standard bore sizes from2¹⁄₂" to 8"

• Lightweight, aluminum/fiberglassdesign

• Premium quality

Parker industrial shock absorbersdecrease machine down time andincrease productivity by reducingimpact damage.• Industry interchangeable• Miniature, small, medium and

large bore sizes available• Metric and inch mounting threads

available• Highest effective weight ratings

• ISO6431 and DIN24335 cylinder• Choice of composite bushings or

recirculating ball bearings• Magnetic piston standard for use

with reed switches or Solid Statesensors

• Optional oversized shafting,bumpers and adjustable stopcollars, flow controls

• Mounts on three sides• Maximum operating pressure

10 bar (145 PSI)

Series P5E 32 40 50 63 80 100

Bore size, mm 32 40 50 63 80 100

Maximum suggested stroke, mm 500 625 725 950 1150 1350

Theoretical force, extend at 75 PSI (5 Bar), N 402 628 982 1559 2513 3927lb 93.5 146.1 228.3 362.4 584.3 913.0

Theoretical force, retract at 75 PSI (5 Bar), N 346 528 825 1402 2268 3682lb 80.3 122.7 191.7 325.9 527.3 856.0

P5E SeriesGuided Cylinders

The P5E Series Guided Cylinderfeatures a cast aluminum housingproviding maximum strength whilemaintaining a light weight, compactdesign. An alignment coupler,which allows the piston rod to self-center, used in conjunction withParker’s premier MP Seriescylinder, provides maximum life.

www.parker.com/pneu/p5e

www.parker.com/pneu/3tk

www.parker.com/pneu/shocks

Complementary Products

Pneumatic Cylinders & SlidesGuided

Page 20: Parker Pneumatic

18

PV Series RotaryActuator

PRN/PRNA SeriesRotary Actuator

• Single and double vane• Miniature and standard models• Optional Hall effect or reed

switches and hydraulic shockabsorber (hydro-cushion)

• Foot or flange mounting• Maximum operating pressure 9.7

Bar (140 PSI)

• Optional stroke adjusters• Single or double ended shafts• Rear porting, flow controls and

fluorocarbon seals• Flange, face or base mounting

options• Maximum operating pressure

10 Bar (145 PSI)• Single and double vane

Series PRN 1 3 10 20 30 50 150 300 800

Standard rotation (°) – Single vane 90,180 90,180,270 – 90, 180, 270 – –Double vane – 90 90 90 90 90,100 280, 90,100 90,100 90,100

Output torque (in-lb) at 45 PSI – Single vane 0.5 1.4 4.0 7.0 16 22.6 73.0 142 508Double vane – 2.9 8.9 15 39 50.3 163 335 1028

Output torque (in-lb) at 100 PSI – Single vane 1.4 3.3 11 21 42 57.8 172.4 331.4 1178Double vane – 6.7 21 47 99 124.8 393.3 794 2355

Series PV 10 11 22 33 36 42 44 46

Standard rotation – Single vane 275° 275° 280° 280° 280° 280° 280° 280°Double vane 95° 95° 100° 100° 100° 100° 100° 100°

Actual output torque at 50 PSI – Single vane 4 8 32 75 150 140 285 425Double vane 8 17 68 155 315 300 600 900

Actual output torque at 100 PSI – Single vane 8 16 64 150 300 285 570 850Double vane 16 33 135 315 630 600 1200 1800

Displacement, in3 – Single vane 0.52 1.04 3.67 8.70 17.40 17.80 35.61 53.41Double vane 0.37 0.74 2.62 6.20 12.40 14.58 29.17 43.75

Rotary Actuators

The PV Series is available in eightsizes and either single or doublevane configurations. Precisionextruded bodies and hard coatanodized components providemillions of maintenance-free cycles.

The PRN/PRNA Series uses arounded vane design in its ninesizes, helping to reduce vane sealleakage and lower breakawaypressure. The PRN/PRNA also hasan optional, externally mountedhydraulic shock absorber whichcan be used in high inertial loadapplications.

Vane Style

www.parker.com/pneu/pr

www.parker.com/pneu/pv

Page 21: Parker Pneumatic

19

XR Series RotaryActuator

PTR Series RotaryActuator

• Choice of 4 shaft types• Optional port location, cushions,

bumpers, shock/stroke adjust,antibacklash actuator, magneticpiston, flow controls, fluorocar-bon seals

• Standard base mount with op-tional front or rear face mount

• Maximum operating pressure10.3 Bar (150 PSI)

Series XR 05 07 10 15 20

Standard rotations (all models) 90°, 100°, 180°, 190°, 270°, 280°, 360°, 370°

Actual output torque at 50 PSI , lb-in 3 8 20 49 118

Actual output torque at 100 PSI, lb-in 6 17 40 99 236

Displacement per degree rotation, in3 0.001 0.003 0.007 0.017 0.041

• Zero internal and external leakage• Optional cushions, bumpers or

shock absorbers, sensing, strokeadjust, 3-position cylinder,anti-backlash actuator, air/oiloperation, port flow controls,shaft seal covers

• Standard base mount with op-tional front or rear face mount

• Maximum operating pressure17 Bar (250 PSI)

Series PTR 10 15 20 25 32

Standard rotation (all models) 90°, 180°, 270°, 360°, 450°

Theoretical output torque at 50 PSI Input, lb-in:Single rack 19 59 141 215 570

Double rack 39 118 282 430 1,141

Theoretical output torque at 100 PSI Input, lb-in:Single rack 39 118 282 430 1,141

Double rack 79 236 565 859 2,281

Theoretical output torque at 250 PSI Input, lb-in:Single rack 98 294 705 1,074 2,852

Double rack 197 590 1,410 2,148 5,703

Displacement per degree rotation, in3

Single rack 0.007 0.021 0.049 0.075 0.199Double rack 0.014 0.042 0.099 0.150 0.398

Rotary Actuators

The XR Series is designed forlight-duty pneumatic applications.With five sizes up to 2" bore, and acompact low profile design, theXR is ideal for smaller pneumaticautomation applications.

The PTR Series Rack and Pinionrotary actuator is available in fivebore sizes and either single ordouble rack providing a wide rangeof output torques.High capacity shaft bearings and aunique floating piston design, withtwo wear bands per piston, give thePTR Series the longest life span andhighest quality of any rotaryactuator available.

Rack & Pinion Style

www.parker.com/pneu/xr

www.parker.com/pneu/ptr

Page 22: Parker Pneumatic

20

HP Series Heavy DutyRotary Actuators

• Heavy duty construction• Choice of 4 shaft styles• Optional cushions, stroke adjust,

fluorocarbon seals• Maximum operating pressure

7 Bar (100 PSI)

Series HP 4.5 10

Standard rotation (all models) 90°, 180°, 360° 90°, 180°, 360°

Actual output torque at 100 PSI, lb-in 4500 10,000

Displacement, in3

90° Rotation 79.93 177.64180° Rotation 159.86 355.28360° Rotation 319.72 710.56

Rotary Actuators

Multi-Axis Systems

Linear guided cylinders, rotaryactuators, pneumatic grippers andvacuum components can be usedindividually or in combination toform modular handling systems forpick and place applications. Parkeroffers a wide range of mountingplates and couplers ready to usewith standard components.Utilizing the simplicity of air powerand pre-engineered componentsprovides top performance andreliability while reducing the costof simple automation projects.

The HP Series is designed forlarge, heavy duty applications.With output torque to 10,000 in-lbsand kinetic energy ratings in excessof 600 in-lbs, the HP Series canhandle the most demandingpneumatic rotary actuator needs.

Rack & Pinion Style

www.parker.com/pneu/hp

www.parker.com/pneu/multi

Page 23: Parker Pneumatic

21

Single Source Supplier for AllAutomation NeedsWith 26 series of grippers available in more than1,000 configurations, Parker Hannifin has acomplete line of Pneumatic Grippers suitable forany pneumatic gripping application.Grippers are available in either true parallel, 30° or180° gripping configurations along with any numberof design forms which provide precise form andfunction fits for each unique application.Parker Hannifin grippers are designed to incorporatehigh grip force to weight ratio, making them idealfor end of arm tooling and high speed applications.This allows down-sizing of other systemcomponents resulting in substantial cost savings.Hardened steel jaws provide the high-strengthmounting surfaces necessary for rigid mounting.High precision linear bearings and hard coatanodized wear parts provide millions of trouble-freecycles, even under extreme loading.With the Pneumatic gripper offering availablethrough Parker Hannifin, there should be noautomation application that cannot be handled.Whether it is a high speed semi-conductorapplication which requires a lightweight, clean roomcertified gripper with high precision or anautomotive application in which extreme force andloading is involved, Parker is sure to have a gripperto suit your application needs.

Standard Options:Gripper options include spring assist or springreturn grippers which provide a fail-safe mode inthe event of a power failure. This option allows thegripper to also be used in a single acting fashion.For dirty environments, dust covers or wiperassemblies can be provided to prevent contaminantsfrom destroying the inner mechanisms of thegripper. With the addition of a purge port, designedto remove particulate contamination, the grippersbecome clean room certified.Connectivity:With the addition of transition plates and transitioncouplers, Parker has the ability to link Pneumaticgrippers and slides in any combination.Specifications:• Stroke Ranges: 0.12 to 6.0 inches• Grip Forces: up to 3000 lbs• Operating Characteristics:

- Single acting- Double acting- Spring assist and spring return

• Cycle Life: 10 million cycles

Grippers

www.parker.com/pneu/pgrippers

Page 24: Parker Pneumatic

22

Total HighMax. Grip Metric Clean Spring Spring Non- Reed/ Temp

Series Strokes Force lb Design Room Open Close Synch Synch Hall Prox Seals

GPR 10-20 mm 7-32 x – – – – – – s –

GPCR 4-14 mm 6-51 x * o – – – s – –

P5G-HPM 0.13-0.25 in 8 – o o – – x – – o

P5G-HP (mini) 0.16-0.25 in 25-64 o – – – x – – – –

P5G-HP 0.25-1.50 in 35-694 o – – – x – – s –

GPT 0.625 in 22-44 – – – – x – s s o

P5G-AP 5.3-17.9 mm 31-208 x – o o x – o o o

GPEL 16-22 mm 10-27 x – – – – x – s –

GPDL 16-80 mm 10-65 x – – – x – – s –

P5G-HPL 0.25-1 in 25-33 o o – – x o s – o

P5G-RH 4-18 mm 22-397 x – – o – – s – –

P5G-HP-P 0.5-3.0 in 23-498 o – – – x – – s o

GPK 24-50 mm 20-90 x – – – x – – s –

P5G-HPW 0.75-4.50 in 45-450 o – – – x o – s o

P5G-HPB 4-6 in 600 – – – – – – – s x

P5G-HPC 0.3-1.38 in 80-2800 o * – – x – s – o

x = standard, o = optional, s = order separately, * = dust cover

Grip HighMax. Force Metric Dust Spring Spring Non- Reed/ Temp

Series Stroke (lb) Design Cover Open Close Synch Synch Hall Prox Seals

GVC 30° 11-36 x – o – x – – s –

GAA 30° 24-56 – – – – x – s s o

P5G-HA 30° 11-134 o – – – x – s – o

P5G-AA 30° 17-198 x – – o x – s o o

P5G-RK 30° 7-521 x o – – x – – s –

P5G-HA 12° 62-220 o – – – x – – s o

3H2 30° 121 x x o – x – – o –

GVH 180° 5-53 x – – – x – – s –

GAW 180° 24-30 – – – – x – s s o

P5G-AW 180° 13-65 x – – o x – s o o

P5G-RB 180° 13 -142 x o – – x – – s –

x = standard, o = optional, s = order separately

Parallel Grippers

Angular Grippers

Grippers

www.parker.com/pneu/pargrip

www.parker.com/pneu/anggrip

Page 25: Parker Pneumatic

23

15 mm Series

ADEX Series

Compact, simple design utilizes15 mm low-watt solenoids with awide range of voltages. Manifoldallows mounting of normally openand normally closed operatorssimultaneously. Up to 20 stationsavailable. Operating pressurevacuum to 145 PSIG (10 bar).

Valves utilize 0.6 watt solenoidswith LED and surge suppression.The collective wiring systemavailable for A05 and A12 valvesaccommodates up to 12 stationsand connects with Sub-D 25 or26-pin ribbon.

Series A00 A05 A12

Function 3/2 NO, NC 4/2, 4/3 4/2, 4/3

Port Size(s) M3 M5 ¹⁄₈" NPT, BSP

Flow, Cv 0.01 0.18 0.47

Pneumatic Valves

• 3-way, 2-position• M5 cylinder port• Manifold or subbase mounted• Cv = 0.033 standard,

0.05 high flow

ModuflexSeries

With high performance technology,Moduflex opens a new era in thefield of electro-pneumaticautomation. Valves may be stand-alone or assembled into short longislands, depending on theapplication. With IP 65-67 waterand dust protection, the valves canbe installed near the cylinders forshorter response time and lower airconsumption. Metric sizes are alsoavailable. Island modifications areeasy and adding or removing avalve or changing a valve function,tubing size, or piloting can be done

in minutes. Moduflex is offeredwith DeviceNET, Profibus-DP,Interbus-S, CANopen and ASi serialbus communication protocols.• 2 valve sizes• 3-way, 2 position single, 4-way,

2-postition single and double,dual 3-way, 2 position, 3-pos CE,APB and PC

• ⁵⁄₃₂" or ¹⁄₄", ¹⁄₂" push-in fittings• Peripherals include flow controls,

pressure regulators and dual POcheck modules

• Cv = 0.32 to 0.8

• 4-way, 2 and 3-position and 3-way,2 position (NO or NC)

• Inline or bar manifold mounted• Collective wiring system - Sub-D

25 or 20-pin Multi connector

Solenoid Operated

www.parker.com/pneu/moduflex

www.parker.com/pneu/adex

www.parker.com/pneu/15mm

Page 26: Parker Pneumatic

24

Pneumatic Valves Solenoid Operated

www.parker.com/pneu/microking

www.parker.com/pneu/isomax

www.parker.com/pneu/PVL

MicroKing Series

ISOMAX Series

Sandwich and subbase manifoldregulators. 4.8 watt continuous dutysolenoids with 24" grommet, 3-pinDIN or ¹⁄₂" conduit connection.• 3 and 4-way, 2-position valves• ¹⁄₈" NPT or BSP, M5 and ¹⁄₄"

tube ports• Inline, manifold or subbase

mounted• Cv = 0.19 (3-way) 0.18 (4-way)

Polyamide reinforced Fiberglassbody with hard anodized aluminumcover. Features Ceramic Technol-ogy for maintenance-free service.Mounted on VDMA subbases,standard 14563, ISO 15407-1 andUNITOP RU-P/3. Valves can bevacuum operated. Solenoid pilotexhaust may be captured,and internal/external piloting ispossible using gasket selectors.Operating pressure range 30-145PSIG (2-10 bar).

Easy in, easy out stack assemblyspeeds installation and makes futureconfiguration changes or servicefast and simple. Output portsavailable either threaded or withinstant tube fittings. Thin valvecross sections allow for more valveoutputs in a smaller package. Stackhas two common exhaust galleries.

Series PVL A B C

Function:Single Operated ⁴⁄₂ ⁴⁄₂ ⁴⁄₂

Double Operated ⁴⁄₂ ⁴⁄₂, ⁴⁄₃, dual ³⁄₂ ⁴⁄₂, ⁴⁄₃, dual ³⁄₂

Threaded Port Size(s) M5 ¹⁄₈" NPT, BSP ¹⁄₄" NPT, BSPPort Tube Fittings ⁵⁄₃₂" ¹⁄₄", 6 mm ³⁄₈", 8 mm

Flow, Cv 0.17 0.6 1.2

PVL Series

• 2 and 3-position ISO valves• ¹⁄₈" and ¹⁄₄" ports on manifold• Subbase manifold mounted• Cv = 0.50 (¹⁄₈") and 0.75 (¹⁄₄")

• Three body sizes• Stacking manifold valves de-

signed for DIN rail mounting• Single and double solenoid or

air pilot operated

Page 27: Parker Pneumatic

25

Pneumatic ValvesSolenoid Operated

www.parker.com/pneu/b

www.parker.com/pneu/h

H Series

B Series

Series B 3 4 5 6 7 8

Port Size(s) ¹⁄₈", ¹⁄₄" ¹⁄₄" ¹⁄₄", ³⁄₈" ³⁄₈" ¹⁄₂" ³⁄₄"

Flow, Cv 0.75 1.22 1.40 2.70 4.90 7.00

Compact, high-performance spoolvalves feature WCS (Wear Com-pensation System) sealing systemfor extended life. Optional sand-wich regulators and overrides.Variety of voltages and coil enclo-sures. Maximum operating pressure10 bar (145 PSI).

ISO valve patterns are globallyinterchangeable between manufac-turers. Designed for non-lubeservice for millions of trouble-freecycles. A full complement ofsandwich regulators and flowcontrols add to the flexibility of theH Series. ISO 5599/1 includes22 mm and 30 mm CNOMOsolenoid pilots, as well as NEMA4 “Automotive” style mini and

• 3 or 4-way, 2-position singlesolenoid or remote pilot. Dual 3-way available on B3 valves

• 4-way, 2 or 3-position doublesolenoid or remote pilot

• Inline, subbase, manifold or barmanifold mounting (NPT orBSPP ports)

micro-connectors. ISO 5599/2valves have body to base plugswhich hide wiring and make valvereplacement fast and easy.• 4-way, 2 and 3-position• Conforms to ISO 5599/1 and

5599/2• ISO sizes 1, 2, 3 and 4• Subbase and manifold

mounted

Series H 1 2 3 4

Port Size(s) ¹⁄₄", ³⁄₈", ¹⁄₂" ³⁄₈", ¹⁄₂" ¹⁄₂", ³⁄₄" ³⁄₄"

Flow, Cv:2-Position 1.55 3.6 6.6 7.4

3-Position CE 1.35 3.70 6.40 5.23-Position APB 1.35 3.10 6.30 5.2

Page 28: Parker Pneumatic

26

Cyclone Series General purpose and hazardousduty valves for use with gasses,liquids or vacuum service.Grommet, conduit or spadehousings are rotatable for ease ofinstallation. Maximum pressure500 PSIG.• 2 and 3-way, 2-position• ¹⁄₈" and ¹⁄₄" inch ports• Inline or surface mounted• Direct solenoid operated• Cv = 0.02 to 0.73

N Series High-SpeedPoppet Valves

Compact inline design in three bodysizes features a short stroke poppetfor fast, consistent response. Pre-lubed for non-lube service. Suitablefor low pressure and vacuumservice with external pilot. Specialservice pilots available for applica-tions requiring continuous dutyoperation. Pressures to 250 PSIG.

Series N ³⁄₈³⁄₈³⁄₈³⁄₈³⁄₈" Body ³⁄₄³⁄₄³⁄₄³⁄₄³⁄₄" Body 1¹⁄₄¹⁄₄¹⁄₄¹⁄₄¹⁄₄" Body

Port Size(s), NPT ¹⁄₄", ³⁄₈", ¹⁄₂" ¹⁄₂", ³⁄₄", 1" 1", 1¹⁄₄", 1¹⁄₂"

Flow, Cv 3.0 to 4.4 9.0 to 11.0 20.0 to 30.0

Pneumatic Valves

• 2 and 3-way, 2-position• Three body sizes• Normally open or normally

closed• Inline mounted

Solenoid Operated

www.parker.com/pneu/n

www.parker.com/pneu/cyclone

Page 29: Parker Pneumatic

27

Interface 2000 Series

PVLB10/PVLC10Series

Full flow capacity allows directoperation of small cylinders orpneumatic piloting of larger controlvalves. System is easily modified orexpanded by adding modules to thestack. Modules snap together withintegral electrical pin connections.Common air supply and exhaustconnections through the manifold.IP65 protection. Multiple pressuresare possible in one assembly.

Easy in, easy out stack assemblyspeeds installation and makes futureconfiguration changes or servicefast and simple. Output portsavailable either threaded or withinstant tube fittings. Thin valvecross sections allow for more valveoutputs in a smaller package.A no-wire stack system facilitatesits “plug and play” design. Twoforms of mass termination electricalconnectors (25 or 35 pin) communi-cate to the valve via interconnectboards. Feedback and outputmodules can be combined into the

Pneumatic Valves

Small serial bus electronic package.Automatic addressing of up to 16valves. Compatible withDeviceNet™, Profibus-DP®,Interbus-S®, and ASI®.• 3 and 4 way, 2-position single or

double operated• ⁵⁄₃₂" or ¹⁄₄" push-in tube fittings• Modular stacking valves for DIN

rail mounting• Cv = 0.19

valve stack to further enhance thevalves adaptability into machinesystems. Operating pressures from30 to 150 PSIG.• 2 Valve body sizes• 4-way, 2 and 3-position• ¹⁄₈" and ¹⁄₄" inch ports or ¹⁄₄" and

³⁄₈" inch tube fittings• Stacking (designed for DIN rail

mounting)• Compatible with Profibus-DP®,

DeviceNet™, Interbus-S® and ASI• Cv = 0.6 to 1.20

Solstar Series System modification or expansion isas simple as adding valves to thestack. Intermediate supply modulesenable different pressures to be usedon the same manifold. Low watt15 mm solenoids with LED andsurge suppression available in awide variety of voltages. Up to 20stations available. Operating pres-sure to 145 PSIG (10 bar).

• 3-way, 2-position (NO or NC)• Modular stacking system, DIN rail

mounting• Integral “plug-in” electrical

connection• ⁵⁄₃₂" push-in tube outlet fittings• Cv = 0.033 (NO), 0.05 (NC)

Electro-Pneumatic

www.parker.com/pneu/solstar

www.parker.com/pneu/int2000

www.parker.com/pneu/PVLx10

Page 30: Parker Pneumatic

28

PAR-15 Series PAR-15 controls the divisionof a single inlet pressure intoany one of fifteen equallyspaced output pressures. Thevalve’s response is instantand repeatable, reducing theneed for expensive feedbackcontrols.• 3-way multi-pressure select

valve• Solenoid operated• ¹⁄₂" body ports, ¹⁄₈" pilot

ports• Functions as precise, high-

flow, multipurpose regulator

Serial AddressableModule - Generation 3.0

P3P-R Series

SAM Generation 3.0 modules aredesigned for simplicity and power.Typical applications include areasof control requiring one to fourvalves with sensor feedback needslocated a distance from the centralcontrol panel. SAM Generation 3.0allows users to wire up to 4 externalinputs (such as actuator proximityswitches) back to the valve.Perfect for applications where spaceis a premium, the SAM 3.0 packagetakes up only slightly more space

P3P-R controls the outputpressure proportionally to ananalog electrical signal. Ahigh degree of precision isachieved by internal feedbackthrough an integrated pressuresensor.• Integrated electronic control• Pulse width modulated

solenoids• ¹⁄₈", ¹⁄₄" and ¹⁄₂" ports• Functions as precise, high-

flow, multipurpose regulator

FlexSAM SerialBus System

FlexSAM’s completely modulardesign allows for field retrofits andexpansion. The system offers theability to turn off all the outputswhile keeping communications andinputs active. Solenoid and outputdiagnostics ease troubleshooting.Available with F3, F5, F7, H1, H2and H3 Series valves.

Pneumatic Valves

• Capable of handling 32 inputsand 32 outputs

• Compatible with PNP and NPNinputs

• NEMA 4 protection• Compatible with DeviceNet™,

Allen-Bradley Remote I/O andProfibus-DP®

than the standard valve/baseassembly it is attached to. Compat-ible with F3, F5, F7, H1, H2 andH3 Series valves.• Self-contained valve module with

inputs• Designed for one to four valves• Maximum four solenoids and

four external inputs• Compatible with DeviceNet™

Electro-Pneumatic

Proportional RegulatorsPneumatic Valves

www.parker.com/pneu/flexsam

www.parker.com/pneu/sam3

www.parker.com/pneu/par15 www.parker.com/pneu/p3pr

Page 31: Parker Pneumatic

29

Directair Series

42 Series

Compact, stainless steel spoolvalves with lightweight aluminumconstruction offer a wide range ofrugged operators, providing solidperformance and applicationflexibility. Choose from hand lever,knob, lockdown, palm button,roller, plunger, tripper, or operators.¹⁄₈" valves also available in apoppet design. Operating pressurevacuum to 150 PSI.

HandSeries Directair 2 Plunger Roller Tripper Toggle Button Lever Treadle Pedal

3-Way Poppet ✓ ✓ ✓ ✓ ✓ ✓ – –

3-Way Spool ✓ ✓ ✓ ✓ ✓ ✓ – –

4-Way Spool ✓ ✓ ✓ ✓ ✓ ✓ – –

Directair 4 – – – – – Lever – –

3-Way Spool – ✓ – – ✓ ✓ ✓ ✓

4-Way Spool – ✓ – – ✓ ✓ ✓ ✓

Single piece spool with moldedBuna N seals for long, trouble-freelife. Available with manual leverand foot pedal. Maximum operatingpressure 150 PSIG.• 4-way, 5-port, 2 and 3-position• ¹⁄₄" and ³⁄₈" inch ports• Inline Mounted• Manually operated• Cv = 1.30 to 2.90

Pneumatic Valves

• 3 and 4-way, 2 and 3-position• ¹⁄₈" and ¹⁄₄" inch ports• Inline mounted• 14 different manual/mechanical

operators• Cv = 0.12 to 0.83

Manual, Mechanical & Air Logic

www.parker.com/pneu/directair

www.parker.com/pneu/42ser

Sliding Seal Valves Rotary disc design with ¹⁄₄" to ¹⁄₂"ports has Cv from 2.5 to 6. Slidingseal design with ¹⁄₈" and ¹⁄₄" portshas Cv from .54 to 1.25.

• 3 and 4-way, 2 and 3-position• ¹⁄₈" through ¹⁄₂" inch ports• Surface mounted• Manually operated

www.parker.com/pneu/ssv

me35269
me35269
me35269
Page 32: Parker Pneumatic

30

Control PanelProducts

Push button switches provide singleor multiple air pilot control signalsto larger power valves. Switchbodies come with or without amounting base. A variety of 22 mmoperating heads are available tocreate momentary or maintainedpressure signals.Visual indicators take the place ofelectric pilot lights in pneumaticsystems. They indicate the presenceor absence of a pneumatic signal.

Limit Valves & Sensors Miniature limit switches areavailable with plunger, roller orroller lever operators with 10-32threaded or ⁵⁄₃₂" instant tubefittings. Standard duty limitswitches with ⁵⁄₃₂" instant tubefittings offer plunger, whisker,roller and spring rod operators.Threshold sensors provide electri-cal or pneumatic feedback informa-tion on pneumatic (air) cylinderstatus. Ideal for variable strokeapplications. Banjo fitting can beused with either pneumatic orelectrical sensor.

Pneumatic Valves

Counters use air input to control amechanical counting assembly.Rotary selector switches provide asingle discrete output as prescribedby selector position.• 22 mm modular push button

switches• Visual indicators• Totalizing and pre-

determining counters• Rotary selector

switches

Blocking valves are designed forprecise, repeatable stoppingof moving cylinders or to maintainthe position of a cylinder in theevent of an air pilot signal loss.Port sizes from ¹⁄₈" to ¹⁄₂" inch anda choice of threaded or instanttube fittings.• 3-way, 2-position miniature and

standard duty limit switches• Cylinder port mounted threshold

sensors• Blocking air control

valves

Manual, Mechanical & Air Logic

Air LogicControl Systems

Virtually all production machinesusing pneumatic actuators operatein a dedicated and repeatablesequence or cycle. The purpose ofany control method is to insure thatall steps of the machine’s cycleoccur as intended. The sequencerconstitutes the backbone of aTelepneumatic control circuit. Thesequencer’s poppet design provideslong life using only shop air. Sinceit is modular, the sequencer caneasily be configured to anyapplication cycle requirement.Logic elements and supporting

relays provide for other applicationneeds such as safety conditions,operating modes and time delays.• Sequencer module• Logic elements: and, or, not, yes,

memory• Time delay relays• Amplifier and sensor relays• Fixed and variable pulse units• Pneumatic pressure level switch• Head and tail set for

DIN rail mounting• Two hand control

module

HeadModule

SequencerModule

DeviationModule

TailModule

www.parker.com/pneu/airlogic

www.parker.com/pneu/cpp

www.parker.com/pneu/limsen

Page 33: Parker Pneumatic

31

Flow Controlsand Accessories

Rugged brass bodies and nitrile sealsoffer dependable performance andlong life. Fluorocarbon seals avail-able on many valves for high tem-perature operation.• Inline flow controls, ¹⁄₈" to 1¹⁄₂"

ports• Micrometer flow controls, ¹⁄₈" to

³⁄₄" ports• Right angle flow controls, M5 to

¹⁄₂" ports

• Prestoflow flow regulators, M5 to³⁄₄" BSPP

• Prestostart pneumatic slow startfittings

• Flow control blocking valves• Prestobloc pilot-operated block-

ing fittings• Inline flow control valves• Prestoload pilot-operated unload-

ing fittings

Silencers give superior performancein noise control with a minimumeffect on air efficiency. Sinteredbronze mufflers are compact andreduce noise with a minimum offlow restriction and back pressure.Operating pressures to 250 PSIGand operating temperatures to300°F (plastic silencers to 140°F).

Valve Accessories

• Slow Start flow controls, ¹⁄₄"and ³⁄₈"

• Needle and check valves ¹⁄₈" to³⁄₄" ports

• Quick exhaust valves, ¹⁄₈" to ³⁄₄"ports

• Relief valves, pop off and adjust-able diaphragm styles

• Prestotwin combined flowblocking/unloading valves

• Prestosensor pressure sensorfittings

• Prestoreduce pressure reductionfittings

• Prestosil silencer and flowcontrol valve

• Metal silencers with port sizesfrom ¹⁄₈" to 1¹⁄₂" NPT or BSPT

• Plastic silencers with port sizesfrom M5 to ¹⁄₈" NPT or BSPT

• Sintered bronze muffler/filterswith port sizes from ¹⁄₈" to 1¹⁄₂"

• Muffler/flow controls with portsizes from ¹⁄₈" to 1"

• Breather vents with port sizesfrom ¹⁄₈" to 1¹⁄₂"

Metric Flow Controls

Silencers & Mufflers

Pneumatic Valves

www.parker.com/pneu/flowctl

www.parker.com/pneu/metricfc

www.parker.com/pneu/silmuf

Page 34: Parker Pneumatic

32

Ball Valves

Lockout Valves

Muffler-Reclassifier

• 2-way standard and vented• Rugged forged bodies for long life• Polypropylene bodies for corro-

sion resistance• Handle options, padlocking

Body Connection Port FlowSeries Style Material Type Sizes (Cv)

500 Std/vented Brass Female ¹⁄₄"-1" 4.0-35.0

501 Std/vented Brass Male/Female ¹⁄₄"-1" 6.3-35.0

502 Panel mount Brass Female ¹⁄₄"-1" 4.0-35.0

520 – Brass Female ¹⁄₄"-2" 4.0-224

590 90° Brass Male/Female – 3.0-11.0

591 90° Brass Male – 3.0-11.0

ACT Rotary driven Brass/SS* Female ¹⁄₄"-1" 4.0-35.0

BVGC – Brass NP Female BSPP ¹⁄₄"-2" 4.0-224

BVGL – Brass NP Female/Female long ¹⁄₄"-2" 4.0-224

MBVG Compact – Female BSPP ¹⁄₄"-³⁄₈" 4.0-6.0

BVGP Locking handle – – ¹⁄₄"-2" 2.0-224

200/608/609 Mini – – ¹⁄₈"-¹⁄₂" 2.0-12.0

Propylene FDA & NSF 51 Polypropylene NPTF/Tube NPTF ¹⁄₈"-¹⁄₂" 2.0-12.0Tube ¹⁄₄"-³⁄₈"

Rugged cast aluminum alloyconstruction. Bright color for easyidentification. Optional exhaustmuffler available. Comply withOSHA procedures.

Muffler-reclassifier improves plantenvironment by removing oilaerosols that are exhausted fromvalves, cylinders and air motors.Also silences exhaust noise tobelow OSHA requirements. Metalretained construction with pluggedor continuous drain option.

* SS ¹⁄₄"-¹⁄₂" onlyNP=Nickel Plated

• 3-way operation• ¹⁄₄" to 1¹⁄₄" ports• Inline or surface mounted• Locking hasp for padlock• Operating pressure to 250 PSIG

• ¹⁄₂" and 1" ports• 99.97% oil removal efficiencies• 25 dBA noise attenuation

Pneumatic Valves Valve Accessories

www.parker.com/pneu/ball

www.parker.com/pneu/LV

www.parker.com/pneu/ecr

Page 35: Parker Pneumatic

33

Pressure Sensors

Cables and panel mounting kits are available for Parker pressure sensors.*F.S.: Full scale

Max. HysteresisPressure Output IP O/P Mode Output

Series Range Type Media Rating Adjustment Setting Display

MPS-1 0 to 145 PSI (1) NPN/PNP Air, Variable, Trim PotBasic 0 to -30 in Hg with Analog Non-corrosive 65 3 to –

0 to 14 PSI Gas 20% F.S.*

MPS-2 0 to -30 in Hg (2) NPN/PNP Air, Variable, Push LEDVersatile -14.7 to 72.5 PSI Non-corrosive 65 100% F.S.* Button (Red)

Gas

MPS-3 0 to 145 PSI (2) NPN/PNP Air, Variable, Push LEDVersatile 0 to -30 in Hg Analog option Non-corrosive 65 100% F.S.* Button (Red)Panel 0 to 14 PSI GasMount -14.7 to 72.5 PSI

MPS-3 SS 0 to 145 PSI (2) NPN/PNP Fluid, Variable, Push LEDStainless 0 to -30 in Hg Analog option Non-corrosive 65 100% F.S.* Button (Red)Steel 0 to 14 PSI to 316L or

630 SUS

MPS-31 0 to 145 PSI Air, Variable, Push LEDColor Panel 0 to -30 in Hg (1) NPN/PNP Non-corrosive 40 100% F.S.* Button (Red/Green)Mount -14.7 to 72.5 PSI or 4-20ma Gas

MPS-4 -8 to 8 in H2O (2) NPN/PNP Air, Variable, Push LEDDifferential 0 to -29.8 in Hg Analog option Non-corrosive 40 100% F.S.* Button (Red)

Gas

MPS-5 0 to 145 PSI Analog FluidTransducer 0 to -30 in Hg Non-Corrosive 65 – – –

to 316L or630 SUS

MPS-6 0 to 145 PSI (1) NPN/PNP Air, Trim PotCompact 0 to -30 in Hg or (1) Analog Non-corrosive 40 – –

0 to 14.7 PSI Gas

MPS-7 Remote Panel: 71: (2) NPN/PNP Variable, Push LEDRemote Use with Analog option – 40 100% F.S.* Button (Red)Display MPS-5, 6, 8 74: (1) NPN/PNP

MPS-8 0 to -30 in Hg (1) NPN/PNP Air, Fixed, Trim PotMini -14.7 to 72.5 PSI or (1) Analog Non-corrosive 40 < 2% F.S.* –

Gas

MPS-9 0 to -30 in Hg (1) NPN/PNP Air, Variable, Push LEDThin -14.7 to 72.5 PSI with Analog Non-corrosive 65 100% F.S.* Button (Red)

Gas

SPCSD -14.7 to 250 PSI (1 or 2) PNP Non- Variable, Push LED0 to 1000 PSI Analog option Corrosive 67 100% F.S.* Button (Red)0 to 3000 PSI to 316L SUS0 to 5000 PSI0 to 9000 PSI

www.parker.com/pneu/sensors

Pressure Sensors

Page 36: Parker Pneumatic

34

A full range of pressure sensors, filters, silencers, fittings and tubingare available from Parker for use with vacuum generators.

Vacuum Products Vacuum Generators

Vacuum FlowSeries Rate (SCFM) Description

MCA 0.21-1.26 Lightweight Venturi Generator for inline mounting. Can be locateddirectly on the cup fitting for space savings. Ideal for use with TYS levelcompensators.

CV 0.21-12.36 Venturi Generator for inline mounting, precision manufactured for longlife. Aluminum basic body includes exhaust muffler. Stainless steel andTeflon options are available for adverse environments.

CV-CK 0.21-5.83 Venturi Generator with adjustable open contact mechanical switch forvacuum confirmation. Ideal for low cost vacuum confirmation.

CV-VR 2.22 Venturi Generator for inline mounting with an automatic blow-offfunction. Built-in reservoir that automatically creates blow-off pressurewhen compressed air flow to the unit is stopped. Eliminates the need fora second Pneumatic Control Valve.

HF 22-91 Multistage vacuum generator. Light weight for end of arm applicationswith a space saving low profile design. Standard integrated flow thruexhaust muffler.

CHF 12.5-31.8 Multistage vacuum generator. Intended for high flow vacuum applica-tions. These units are ideal for porous applications. 4 bolt mountingpattern with gauge opposite of vacuum and pressure inlet portsenable this generator to be panel mounted.

MC2 0.2-0.71 Compact light weight 20 mm wide Venturi Generator with integratedcomponents. Great for high speed automation processes. Integratedcomponents include valves for vacuum and blow-off functions, blow-offflow regulating valve, exhaust and vacuum filters.

MC3 0.19-0.53 Sub-compact 10 mm wide integrated Venturi Generator for high speedpick-and-place applications. Integrated components include valves forvacuum and blow-off functions, exhaust and vacuum filters. AdditionalPneumatic valves are not required to create vacuum and blow-offfunctions.

CVR2 0.56-1.27 Higher flow rate than the MC2. Integrated components include valvesfor vacuum and blow-off functions, blow-off flow regulating valve,exhaust, vacuum filters and a vacuum check valve. Optional pressuresensors reduce cycle time.

CVK 2.1-5.75 Venturi Generator is for higher vacuum flow rates than allowed by theCVR2. Can be used for high-speed pick-and-place and materialhandling systems. Integrated components include valves for vacuumand blow-off functions, blow-off flow regulating valve, exhaust, vacuumfilters and a vacuum check valve.

CVX-0260B 5.75 Venturi Generator is a basic 2 station CVK generator manifold with theaddition of Emergency Stop functions that maintain the last state-of-airduring an emergency stop or power loss. No additional PLC program-ming is required for Air Economizing functions because this function isbuilt into the electrical unit. DeviceNet® and M12 discrete wiring isavailable.

CEK 2.51-5.75 Venturi Generator is a basic CVK generator with the addition of amemory valve that maintains the last state-of-air during an emergencystop or power loss. Integrated components include valves for vacuum,air economizing, and blow-off functions, blow-off flow regulating valve,exhaust, vacuum filters and a vacuum check valve.

www.parker.com/pneu/vacgen

Vacuum Generators

Page 37: Parker Pneumatic

35

Most cups listed above are available as assemblies and with spring stem sets.

Series Diameter Description

PFG 1-200 mm Precision molded single lip flat cup for smooth or slightly curved surfaces.Flat Cup Low profile design makes flat pads ideal for fast response.

P5V-CFS 50-300 mm Precision molded double lip flat cup for slightly curved surfaces. DoubleFlat Cup lip for additional security. If outside lip bends and loses its seal, the inner

lip remains sealed. Outer ribs prevent the cup lip from being cut.

PBG 10-150 mm Versatile bellows cup design provides a flexible sealing lip for productsBellows with irregular, smooth or curved surfaces and flexible products.Cup

PJG 2-80 mm Versatile bellows cup design provides a thin flexible sealing lip forShort products with irregular, smooth or curved surfaces, and slightly flexibleBellows products. Shorter stroke provides fast response.Thin LipCup

PCG 5-90 mm Versatile bellows cup design provides a flexible sealing lip for productsMultiple with irregular, smooth or curved surfaces. 2½ bellows design minimizesBellows contact pressure applied to products.Cup

PKG 40-110 mm Versatile cup design with grooves extending to the outer diameter toAutomotive maximize holding strength and different profiles for flexible products withCup smooth, oily surfaces.

PUGB 10-200 mm 30° swivel single lip flat cups for smooth surfaces, slightly curvedFlat surfaces and flexible products. Rigid stem or level compensator providesSwivel good stability for horizontal lift.Cup

PFOG 20-40 mm Anti-slip flat cup with grooves extending to the outer diameter to increaseGrooved vacuum flow area. Increased friction resists slippage of product duringCup transfer.

PCD 28-50 mm Some of the more popular pads for the CD/DVD industry. High tempera-Ring Cup ture and soft durometer make these pads gentle and durable.

PDG 4-15 mm Sponge cup for work pieces having irregular or uneven surfaces. The 20-Sponge durometer sponge material conforms to the product allowing the desiredCup vacuum level to be achieved.

PAG 10-50 mm These cups have an ultra thin edge that creates the vacuum seal byThin Lip conforming the shape of the product. The complete foot pattern to theCup center of the cup prevents the vacuum from deforming or “puckering”

thin, flexible products.

Vacuum ProductsVacuum Cups

www.parker.com/pneu/vaccup

Vacuum Cups

Page 38: Parker Pneumatic

36

Air Preparation Units

Filters, Regulators &Lubricators

Modular Accessories

Wall Mounting Kits areavailable for mountingmodular assemblies to asurface.

Manifold Blocks can be usedbetween any two modularcomponents to provide twoadditional outlet ports.

Port Block Kits allowfor flexible porting in avariety of sizes and threadtypes (NPT, BSPP, BSPT).

Soft Start and Quick DumpValves are combined in thesame body. Available as inlineor modular mounted and airpilot or solenoid operated.

Lockout Valves providepositive shutoff and exhaustcapacity for system service ormaintenance. The centerposition features a soft startfunction for smooth start-up.

Pressure Switches give an electricaloutput when pressure in a pneumaticsystem either drops below or exceedsthe set pressure. Available in eitherDIN or flying lead connections.

Body Connectors allow easyassembly of modular FRLs. Bodyconnector sets feature specialmolded seals, eliminating o-ringfall-out during assembly anddisassembly.

MainSeries Prep-Air II 14 05 06 07 P3N PF/PL 09 Line

Basic body size ¹⁄₈" ¹⁄₄" ³⁄₈" ¹⁄₂" 1" 1¹⁄₄", 1¹⁄₂" 2" –

Port size(s) ¹⁄₈", ¹⁄₄" ¹⁄₄",³⁄₈" ¹⁄₄", ³⁄₈", ¹⁄₂" ³⁄₈", ¹⁄₂", ³⁄₄" ³⁄₄", 1", 1¹⁄₂" 1, 1¹⁄₄",1¹⁄₂" 2" 1¹⁄₂"-3"

Maximum flow (SCFM):filters1 24 70 85 145 310 380 1000 –

Coalescing filters1 20 30 65 80 150 – – 1000

Regulators2 15 40 75 90 300 1000 – –Pilot controlled regulators2 – 50 95 140 350 – – –

Precision regulators3 – 25 40 – – – – –

Filter/regulators2 18 40 61 90 250 – – –Coalescing filter/regulators3 – – – 45 – – – –

Micro-mist lubricators1 13 40 90 90 – – – –Mist lubricators1 – – 90 90 260 525 1000 –

Filter/precision regulators – 20 – – – – – –

1) At 90 PSIG with 5 PSIG pressure drop2) At 100 PSIG inlet, 90 PSIG secondary and 10 PSIG pressure drop3) At 150 PSIG inlet, 90 PSIG secondary and 5 PSIG pressure drop

Parker FRLs offer rugged perfor-mance and dependable service in awide variety of sizes and flows.Available with polycarbonate ormetal bowls. Operating pressures to250 PSIG. Modular accessories areavailable for most sizes.

www.parker.com/pneu/frl

Page 39: Parker Pneumatic

37

IPS Structural Framing Systems

Modular Solutions toFit Your Needs

Parker Industrial Profile Systems(IPS) structural automation productsoffer unique benefits overtraditional methods of structuralfabrication. All systems andassemblies are pre-engineered tocustomer requirements, yet offerextreme flexibility as needs change.Profiles and accessories areavailable in metric or inch-baseddesigns.Benefits• Extremely short turnaround time

from design to completion• No welding, grinding, cleaning,

painting or distortions• Lower cost through the

elimination of costly traditionalmanufacturingprocesses

• Flexibility to reconfigure asrequirements change

ProfilesParker Industrial Profile Systemshas one of the most comprehensiveproduct offerings in the industry.• More than 130 individual

high-strength aluminum profiles• Metric- and inch-based profiles

and accessories• Metric sizes range from 20 mm to

160 mm• Inch sizes range from 1" to 6"• Extensive range of smooth,

grooveless profiles• Provide attractive and robust

structuresLinear Motion• Roller bearing systems• Extrusion-based linear actuators• Delrin and UHMW

slide bearings

Fasteners and Accessories• Unique T-slot

design for reliableconnection andeasy modification

• Metric and Inch-based hardwareavailable

• Complete line of accessoriesTypical Applications• Enclosures and guarding• Machine bases and frames• Work stations and tables• Material handling systems

www.parker.com/pneu/ips

Page 40: Parker Pneumatic

38

Fittings, Tubing & Hose Brass Fittings

Push-To-ConnectFittings and Cartridges

Push-to-Connect fittings aredesigned for low pressureapplications where fast assembly,disassembly and reassembly isimportant. Use with various typesof thermoplastic tubing. Male pipethreads come standard with whiteacrylic sealant. Cartridges eliminatethe space and labor required toinstall and assemble a conventionalpipe thread connection.• ¹⁄₈"-¹⁄₂"• Brass and composite bodies• Compact size• Full flow

Economical compression fittingsare available in a broad range ofconfigurations and sizes. Noflaring, soldering or otherpreparation of tubing is necessary.Compress-Align, Metru-Lok andPoly-Tite offer captive visiblesleeve. Quick disconnects inchrome plated brass and stainlesssteel are available in Poly-Tite.• ¹⁄₈"-1"• Inch and metric tubing• Captive sleeve• Use with copper, aluminum

and thermoplastic tubing

Barbed fittings are available forboth thermoplastic tubing andrubber hose. Fittings for rubberhose are intended for use with a97HC hose clamp, similar typeclamp or a crimped ferrule. Dubl-barb fittings are designed for usewith polyethylene tubing withoutthe use of a clamp.• One piece• Economical• Use with tubing and hose

Barbed Fittings

Pipe Fittings

• Forgings and extrusions• Threads made to Dryseal standards• Use with brass, copper or iron pipe• Low to medium pressure• Metric adapters available

For a complete review of Parker Brass Fittings andValve Products, please reference Catalog 3501-E/US.

Compression Fittings

www.parker.com/brassprod

Page 41: Parker Pneumatic

39

• Metal to metal seal for widetemperature range application

• Adaptable to inch and metric tubeand hose assemblies

• Offered with SAE, NPT, ISO6149, BSPP, BSPT and metricport ends

37° Flare Fittings

• Metric and BSP conversion adapters• SAE straight thread fittings and

adapters• NPT fittings and adapters• Sizes range from ¹⁄₈" through 2" in

steel, brass and stainless steel

Pipe Fittings and Adapters

• Designed for copper and plastictube systems

• Captive ferrule bites the outersurface with sufficient strength tohold the tube against pressure

24° Flareless Brass Fittings

Fittings, Tubing & HoseTube Fittings

24° Flareless Bite Type Fittings• Metal to metal seal for wide

temperature range application• Suitable for use with inch tube in

wall thickness from medium toheavy

• For use with steel, stainless steeland plastic tube

• Three pressure ranges for opti-mum compactness

• For use with metric tube and hoseassemblies

• For use with steel, stainless steeland plastic tube

• Offered with SAE and NPT, ISO6149, BSPP, BSPT, metricparallel and tapered port ends

Metric 24° Flareless Fittings• Meets DIN 2353 and ISO 8434-1• Sizes range from 4 mm through

42 mm in steel, brass and stain-less steel

• Meets SAE J514 and ISO 8434-2• Sizes range from ¹⁄₈" through 2"

in steel, brass and stainless steel

• Offered with NPT port ends• Sizes range from ¹⁄₈" through

¹⁄₂" in brass

• Offered with SAE and NPTport ends

• Meets SAE J514• Sizes range from ¹⁄₈" through

2" in steel and stainless steel

For a complete review of Parker Industrial Tube Fittings, Adaptersand Equipment Products, please reference Catalog 4300/US.www.parker.com/tfd

Page 42: Parker Pneumatic

40

Tubing andThermoplastic Hose

Hose

O.D. Range O.D. RangeMaterial (inches) (mm)

Polyethylene ¹⁄₄-⁵⁄₈ – x x x x x x – x x x x – – – x6 mm-12 mm – – – – – – – x – – – x – – –

Flame Resistant Polyethylene ⁵⁄₃₂-¹⁄₂ – – – – – – x – – – – – – – – –High Density Polyethylene ¹⁄₄, ³⁄₈ – x x x x x x – x x x x – – – x

Flexible Nylon ¹⁄₈-¹⁄₂ – x x x x – – – x x x x – – – x4 mm-20 mm – – – – – – – – – – – x – – –

Pure Air ¹⁄₈-³⁄₄ – – – – – – – – – – – – – x – –Semi-rigid Nylon ¹⁄₈-¹⁄₂ – x x – x – – – – – – – – – – –

Polypropylene ¹⁄₈-⁵⁄₈ – x x x x x – – – – – – – – – –

Low Durometer Polyurethane ¹⁄₈-⁵⁄₁₆ – – – – – – – x – – – x – – – –Med. Durometer Polyurethane ¹⁄₈-³⁄₄ – x x – – – – x x – – x – – x –

4 mm-12 mm – – – – – – – – – – – x – – –High Durometer Polyurethane ¹⁄₈-³⁄₄ – x x – – – – – x – – x – – – –

4 mm-12 mm – – – – – – – – – – – x – – –

Clear Vinyl ¹⁄₈-2¹⁄₂ – – x x x x – x – – – – – – – –

Fluoropolymer PTFE ¹⁄₁₆-³⁄₄ – x x – – – – – – – – – – – – –Fluoropolymer FEP ¹⁄₈-⁵⁄₈ – x x – – – – – – – – – – – – –Fluoropolymer PFA ¹⁄₈-1 – x x – – – – – – – – – – – – –

I.D. Range Max. WorkingHose Type (inches) Pressure (PSI)

Fast-Stor® Nylon Hose ³⁄₁₆-¹⁄₂ 170 x –

Fast-Stor® NoMar™ Urethane Hose ³⁄₁₆-³⁄₄ 125 – x

Recommended Fittings

Recommended Fittings

True

Seal

™Fa

st &

Tite

Com

pres

sion

Com

pres

s-Al

ign

Poly-

Tite

Dubl

-Bar

bPa

rBar

bPr

esto

lok/

Pres

tolo

k II

Pres

tom

atic

(SAE

)

Pres

toM

icro

lok

Met

ru-L

okDA

TFa

st-S

tor®

Flow

Con

trol V

alve

s

Fast

-Sto

rFa

st-S

tor N

oMar

Fittings, Tubing & Hose Thermoplastic Products

For a complete review of Parker Thermoplastic Hose, Tubing, Fittingsand Accessory Products, please reference Catalog 4660/US.www.parker.com/parflex

Page 43: Parker Pneumatic

41

Fittings, Tubing & HoseRubber Hose Products

The Parker Push-Lok system iseasy to use. No clamps or specialtools are required duringinstallation. And with Parker’sexclusive color-code system, youcan inventory, maintain andidentify your hose needs easily andefficiently. Parker Push-Lokassemblies can be made in seconds,saving valuable time and money. Itsunique seal ensures reliability and

Rubber Hoseand Fittings

durability for clean-environmentuse. Premium products and leak-free solutions are what you’ll getwith every Parker Push-Lok hoseand fitting system. With the mostcomplete line of high-quality, low-pressure hose and fittings, Push-Lok is the answer to all yourpneumatic needs.

Note: Push-Lok hose is recommended for vacuum applications but not for cooling lines in airconditioners and heat pumps, nor for hydraulic applications where extreme pulsations areencountered. Push-Lok is not recommended for any fuel.

Consult the Hose Products Division Catalog 4400/US before use of product.

Parker Push-Lok Hose

All Parker Push-Lok hose can beeasily attached to Parker’s line oflow pressure 82 Series Push-Lokfittings, which are available inbrass, steel, and stainless steel.Parker’s patented Push-Lok fittingfeatures rapid and easy assemblycombined with tight, positivesealing. The reliable, barbed

Parker Push-Lok Fittings82 Series

design allows simple “push on”attachment and requires absolutelyno exterior hose clamps. Acomplete line of 82 Series Push-Lok fittings is available, includingpipe, JIC, SAE, Seal-Lok®, unions,metrics and quick-disconnect styleproducts.

Color AvailabilityI.D. Range Working Temperature Ranges

Hose (inches) Pressure Petroleum Water Air

801 ¹⁄₄" to 1" 250 -40°F to +212°F Up to +185°F -40°F to +158°F x x x x x x – –

831 ¹⁄₄" to ³⁄₄" 300-350 -40°F to +212°F Up to +185°F -40°F to +158°F – x – x x x – –

821 ¹⁄₄" to ³⁄₄" 250-350 -40°F to +212°F Up to +185°F -40°F to +158°F – – – – – x – –

821FR 1¹⁄₄" to ³⁄₄" 250-350 -40°F to +212°F Up to +185°F -40°F to +158°F – – – x x x x x

836 ¹⁄₄" to ⁵⁄₈" 250 -55°F to +302°F Up to +185°F -40°F to +158°F – – – x – – – –

RE

DY

EL

BLU

GR

A

GR

NB

LK

BR

NW

HT

WH

T

For a complete review of Parker Hose, Fittings, Accessoriesand Equipment Products, please reference Catalog 4400/US.www.parkerhose.com

Page 44: Parker Pneumatic

42

Quick Couplings

General Purpose

Special Purpose

Coupler Body Material Locking Std. Seal Temp RatedSeries Style Interchange Size (in.) Br SS S* Mechanism Material Range** Pressure

10 Series Manual Tru-Flate ¹⁄₄ to ¹⁄₂ x x x Ball Buna-N (Nitrile) -40° to 250°F 300 PSI

20 Series Manual Industrial ¹⁄₄ to ¹⁄₂ x x x Ball Buna-N (Nitrile) -40° to 250°F 300 PSI

RF Series PTC* RF ¹⁄₄ x – x Ball Buna-N (Nitrile) -40° to 250°F 300 PSI

HF Series PTC* Industrial ¹⁄₈ x – x Ball Buna-N (Nitrile) -40° to 250°F 300 PSI

HA Series PTC* ARO 210 ¹⁄₂ x – – Ball Buna-N (Nitrile) -40° to 250°F 300 PSI

IndustrialUC Series PTC* Tru-Flate ¹⁄₄ x – – Ball Buna-N (Nitrile) -40° to 250°F 150 PSI

ARO 210

Coupler Body Material Locking Std. Seal Temp RatedSeries Style Interchange Size (in.) S*P Mechanism Material Range** Pressure

E-z-mate Exhaust Industrial ¹⁄₄ to ³⁄₄ x Ball Buna-N (Nitrile) -40°F to +250°F 300 PSIPTC†

Tool-mate Exhaust & Std Industrial ¹⁄₄ to ¹⁄₂ x Fingers Buna-N (Nitrile) -40° to +250°F 300 PSIPTC† Cejn320

Rectus25

Code:Code:Code:Code:Code: SS = Stainless Steel, S = Steel, P = Plastic* Steel parts are zinc plated with yellow chromate coating for extra corrosion resistance.** Standard seals† Push-to-Connect

Single shut-off couplings are primarily used forpneumatic applications, connecting air tools, hosesor other implements to compressed air supplies.They are also used with other gases and except forE-z-Mate, can be used with low pressure fluids. Thecoupler half contains a shut-off valve that is auto-matically opened when a mating nipple is insertedand automatically closed when the nipple is re-moved. Ethylene propylene, fluorocarbon andneoprene seals are available as options. Alsooffered are controlled pressure, full pressure pistoland grip style blow guns.

Tool-mateE-z-mate

Fittings, Tubing & Hose Quick Couplings

For a complete review of Parker Quick CouplingProducts, please reference Catalog 3800/US.www.parker.com/quickcouplings

Page 45: Parker Pneumatic

43

Sales Offices

Division OfficesActuator DivisionParker Hannifin Corporation135 Quadral DriveWadsworth, OH 44281Tel: 330-336-3511Fax: 330-334-3335

Pneumatic DivisionParker Hannifin Corporation8676 East M-89; P. O. Box 901Richland, MI 49083Tel: 269-629-5000Fax: 269-629-5385

North AmericaNortheastParker Hannifin CorporationHudson, NH 03051Tel: 603-579-5833Fax: 603-579-5814

Great LakesParker Hannifin CorporationFairlawn, OH 44333Tel: 330-670-2680Fax: 330-670-2681

GulfParker Hannifin CorporationRichardson, TX 75080Tel: 972-238-5020Fax: 972-238-5029

MidwestParker Hannifin CorporationWest Des Moines, IA 50266Tel: 515-225-3117Fax: 515-225-3228

SoutheastParker Hannifin CorporationLithia Springs, GA 30122-3205Tel: 770-819-3410Fax: 800-437-3498

WesternParker Hannifin CorporationSeattle, WA 98109-3543Tel: 206-285-7559Fax: 206-285-7432

CanadianMotion & Controls CanadaMilton, ON L9T 5E9Tel: 905-693-3000Fax: 905-876-0788

MexicoEje uno Norte No. 100Toluca, Mexico, CP 50100Tel: 52 722 275 4200Fax: 52 722 279 9308

Asia PacificAustraliaParker Hannifin (Australia) (Pty.) Ltd.Castle Hill, NSW 1765 AustraliaTel: 61 2 9 634 7777Fax: 61 2 9 842 5111

ChinaParker Hannifin Hong Kong Ltd.Shanghai, 200131 ChinaTel: 86 21 6445 9339Fax: 86 21 6445 9717

IndiaParker Hannifin India Private Ltd.Mahape, Navi Mumbai 400709 IndiaTel: 91 22 55 90 7081/85Fax: 91 22 55 90 7080/50

JapanParker-Hannifin-Japan Ltd.Yokohama, Japan 244Tel: 81 45 822 3211Fax: 81 45 822 3210

KoreaPH Connectors Ltd.Seoul, Korea 135-090Tel: 82 2 559 0400Fax: 82 2 556 8187

Latin AmericaBrazilParker Hannifin Industria e Comercio Ltda.12325-900 Jacarei SP BrazilTel: 55 12 3954 5100Fax: 55 12 3954 5266

AfricaRepublic of South AfricaParker Hannifin Africa Pty Ltd.Kempton Park, Republic of South AfricaTel: +27 (0)11-961 0700Fax: +27 (0)11-392 7213

EuropeAustriaParker-Ermeto GmbHA-2700 Wiener Neustadt, AustriaTel: 43 0 2622 235010Fax: 43 0 2622 66212

BelgiumParker Hannifin sa nvB-1400 Nivelles, BelgiumTel: 32 67 280900Fax: 32 67 280999

Czech RepublicParker Hannifin s.r.o.18400 Prague 8, Czech RepublicTel: 420 2 830 85 221Fax: 420 2 830 85 360

DenmarkParker Hannifin Danmark A/SIshoj, Denmark 2635Tel: 45 43 56 04 00Fax: 45 43 73 31 07

England+A166Parker Hannifin plcCannock, Staffs England WS11 ORLTel: 44 1543 456000Fax: 44 1543 456001

FinlandParker Hannifin OyFIN-01510 Vantaa, FinlandTel: 358 9 476 731Fax: 358 9 4767 3300

FranceParker PneumatiqueEveux, Cedex 27031 FranceTel: 33 2 32 23 34 00Fax: 33 2 32 28 98 07

GermanyParker Hannifin GmbHMettmann, 40822 GermanyTel: 49 2 104 1370Fax: 49 2 104 137500

HungaryParker Hannifin CorporationBudapest, HungaryTel: 36 1 220 4155Fax: 36 1 422 1525

ItalyParker HannifinI-20094 Corsico, Milan, ItalyTel: 39 02 451921Fax: 39 02 4479340

NetherlandsParker Hannifin B. V.7575 AT Oldenzaal, The NetherlandsTel: 31 541 585000Fax: 31 541 585459

NorwayParker Hannifin A/SNorway 1402 SkiTel: 47 64 91 10 00Fax: 47 64 91 10 91

PolandParker Hannifin CorporationWarsaw, Poland 02-445Tel: 48 22 836 49 43Fax: 48 22 863 49 44

SpainParker Hannifin Espana S.A.Madrid, SpainTel: 34 91 6757300Fax: 34 91 6757711

SwedenParker Hannifin ABS-523 23 Ulricehamn, SwedenTel: 46 0 321 675700Fax: 46 0 321 675601

SwitzerlandParker Hannifin CorporationCH-1227 Carouge, Switzerland GeneTel: 41 22 307 7111Fax: 41 22 307 7111

Page 46: Parker Pneumatic

44

Tel 800-CPARKER

Fax 1-440-266-7400

www.parker.com/pneumatics

Resources

Offer of SaleThe items described in this document are hereby offered for sale by Parker Hannifin Corporation, its subsidiaries or itsauthorized distributors. This offer and its acceptance are governed by the provisions stated in the full “Offer of Sale”.

FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBEDHEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE.

This document and other information from Parker Hannifin Corporation, its subsidiaries and authorized distributors provideproduct and/or system options for further investigation by users having technical expertise. It is important that you analyze allaspects of your application, including consequences of any failure, and review the information concerning the product orsystem in the current product catalog. Due to the variety of operating conditions and applications for these products orsystems, the user, through its own analysis and testing, is solely responsible for making the final selection of the products andsystems and assuring that all performance, safety and warning requirements of the application are met.

The products described herein, including without limitation, product features, specifications, designs, availability and pricing,are subject to change by Parker Hannifin Corporation and its subsidiaries at any time without notice.

WARNING!

www.parker.com/pneu/P5T

z9xx

Sample direct URL link Sample CD search

Page 47: Parker Pneumatic

CD Catalog

System RequirementsTo view the CD, the following are required:• Pentium®-class processor• Win® 95 OSR 2.0, Win 98 Sec. Ed., Win ME,

Win NT 4.0 (with Service Pack 5 or 6), Win 2000or Win XP

• 16 MB of RAM (32 recommended)• 20 MB of available hard-disk space

Acrobat ReaderCatalog files are viewed using Adobe Acrobat Reader.If you do not have Acrobat Reader installed on yourPC, it will install from the CD. If you have AcrobatReader but do not have the search plug-in, you willbe given the option to either install Acrobat Reader5.0 with search, leaving your existing version, or notinstall Acrobat Reader 5.0 with search.You must have the search plug-in to take advantage of thesearch feature described in the next section.

To View the CDThe CD is self-loading. Just place it in your CD drive.Acrobat Reader will open (or install), and the openingpage will appear on your monitor. From this page youcan navigate to the following sections.

• Search takes you to the search feature. When thesearch window opens, type a word(s) or code* andpress enter. A list of pages where that word appearsis shown. Select one and click the View button.Repeat as needed.

• Contents takes you to the selection of catalogs andproducts on the CD.

• Product Overview takes you to a .pdf file of thisPneumatic Product Range.

• Warning/Offer of Sale takes you to these legaldocuments.

• Getting Started provides a summary of how tonavigate using Acrobat Reader.

• Contact Us provides you with phone, fax andonline information.

Text links are easily identified by blue type. Thecatalog files are fully bookmarked to make navigationquick and easy. Each catalog also has a bookmarkwhich will take you to the Parker web home page forthat division if you are online while you are viewingthe CD. You must first enter your web browserinformation into the Acrobat preferences.Adobe and Acrobat are registered trademarks of Adobe Systems Inc.Windows is a registered trademark of Microsoft Corp.

*Use the CD searchcodes provided inthis catalog to godirectly to the sectionfor that product.

zx99

www.parker.com/pneu/LP

*Use the web addressesprovided with eachproduct to go directlyto that product orseries on the Parkerwebsite.

Page 48: Parker Pneumatic

TM

Parker Hannifin CorporationAutomation Group6035 Parkland Blvd.Cleveland, Ohio 44124Tel: (216)-896-3000Fax:(216)-896-4031www.parker.com/pneumatics

Bulletin AU01-1000/US20M 9/04 SL