paramount environmental protection plan caodc service rig inspection...
TRANSCRIPT
Appendix 6
Paramount Environmental Protection Plan CAODC Service Rig Inspection Form SDS Class G Oilwell Cement SDS Hydrochloric Acid 15% SDS Soda Ash
2800, 421 7th Avenue SW
Calgary AB, T2P 4K9
SITE SPECIFIC ENVIRONMENTAL
PROTECTION PLAN: NWT ABANDONMENT
Application for Authorization Pursuant to the NWT Oil & Gas Drilling & Production Regulations
Table of Contents 1.0 INTRODUCTION ................................................................................................................................. 2
1.1 NWT Abandonment Program ....................................................................................................... 2
1.2 Purpose and Scope of the Environmental Protection Plan ........................................................... 2
1.3 Responsibilities and Roles ............................................................................................................. 3
2.0 HAZARD REVIEW ............................................................................................................................... 5
2.1 A Summary of Studies Undertaken to Identify Environmental Hazards and to Evaluate Risks Relating to the Proposed Work or Activity ............................................................................................... 5
2.2 A Summary of the Measures to Avoid, Prevent, Reduce or Manage Environmental Risks .......... 7
3.0 APPLICABLE PROCEDURES ................................................................................................................ 8
3.1 Critical Structures, Facilities, Equipment & Systems .................................................................... 8
3.2 Chemical Selection ........................................................................................................................ 9
3.3 Waste Management ..................................................................................................................... 9
3.3.1 Discharge Streams ..................................................................................................................... 9
4.0 MONITORING COMPLIANCE ........................................................................................................... 13
4.1 Monitoring Compliance with the EPP ......................................................................................... 13
4.1.1 Inspections .............................................................................................................................. 13
4.1.2 NWT POEMS Audit .................................................................................................................. 13
4.1.3 Improvement .......................................................................................................................... 13
APPENDIX 1: FUNDEMENTAL MITIGATION ................................................................................................. 14
APPENDIX 2: TASK SPECFIC MITIGATION .................................................................................................... 20
APPENDIX 3: TYPE “A” LAND USE PERMIT AND TYPE “B” WATER LICENCE................................................ 21
List of Tables Table 1: Abandonment Program - Personnel Contact Information Table 2: List of Structures, Facilities, Equipment and Systems Critical to Environmental Protection Table 3: Paramount Resources Ltd. NWT Abandonment Waste Stream and Waste Management Plan Table 4: Discharge Streams
2020 NWT ENVIRONMENTAL PROTECTION PLAN PARAMOUNT RESOURCES LTD
2
1.0 INTRODUCTION
1.1 NWT Abandonment Program
The NWT well abandonment program consists of the abandonment of O-15, B-41, N-65, C-02 and N-65 wells in accordance with the Office of the Regulator of Oil and Gas Operations – NWT (OROGO) requirements. Permanent bridge plugs and cement will be used to isolate the downhole zones and the casing will be cut & capped one meter below ground level.
1.2 Purpose and Scope of the Environmental Protection Plan
Due to the limited nature and short duration of these operations and their relatively low environmental impact, this document reflects the scale of the operations.
The sections of the above document that are relevant to the operations planned for the well abandonment and equipment removal (e.g. waste management, fundamental mitigation measures, etc.) have been incorporated in this document to create a field site-specific reference.
This NWT Abandonment Program Environmental Protection Plan (EPP) is a component of the Paramount Operational Excellence Management System (POEMS), which is required to fulfill regulatory requirements. Paramount’s NWT EPP Program is developed and maintained, implemented and improved according to the POEMS (Management System). The POEMS sets procedures for how activities will be carried out while, at the same time, ensuring compliance with requirements for safety, environmental protection and conservation of resources.
The POEMS addresses the items listed below.
a) the policies on which the system is based;b) the processes for setting goals for the improvement of safety, environmental protection and
waste prevention;c) the processes for identifying hazards and for evaluating and managing the associated risks;d) the processes for ensuring that personnel are trained and competent to perform their duties;e) the processes for ensuring and maintaining the integrity of all facilities, structures,
installations, support craft and equipment necessary to ensure safety, environmentalprotection and waste prevention;
f) the processes for the internal reporting and analysis of hazards, minor injuries, incidents andnear-misses and for taking corrective actions to prevent their recurrence;
g) the documents describing all management system processes and the processes for makingpersonnel aware of their roles and responsibilities with respect to them;
h) the processes for ensuring that all documents associated with the system are current, validand have been approved by the appropriate level of authority;
i) the processes for conducting periodic reviews or audits of the system and for taking corrective actions if reviews or audits identify areas of non-conformance with the system andopportunities for improvement;
j) the arrangements for coordinating the management and operations of the proposed work oractivity among the owner of the installation, the contractors, the operator and others, asapplicable; and
2020 NWT ENVIRONMENTAL PROTECTION PLAN PARAMOUNT RESOURCES LTD
3
k) the name and position of the person accountable for the establishment and maintenance of the system and of the person responsible for implementing it.
1.3 Responsibilities and Roles
Roles associated with the Liard abandonment program are presented in Table 1. The President and Chief Operating Officer of Paramount ultimately is accountable for the program. The Environmental Coordinator is responsible for development and maintenance of the NWT EPP Program and assists with implementation, though it is the Managers of the Drilling and Operations departments that are responsible for implementation. The Onsite HSE advisor will be responsible for the NWT EPP Program field implementation. The region Vice President (VP), is the President’s designate for the Liard area. As such, the VP is responsible for working with the Environmental Coordinator and Managers of the Drilling and Operations departments to ensure that the Liard EPP Program is being implemented and, if not, for ensuring issues are addressed. If necessary, the VP will request assistance from the President.
2020 NWT ENVIRONMENTAL PROTECTION PLAN PARAMOUNT RESOURCES LTD
4
Table 1: Abandonment Program - Personnel Contact Information
Title Name Contact
Completions Field Supervisor TBD Telephone: Email:
Superintendent ARO
Construction Supervisor
Director, Health Safety Environment (HSE)
Darren Erdely Telephone: 403-290-3664 Email: [email protected]
Director, Asset Management John Hawkins Telephone: 403-817-5074 Email: [email protected]
Environmental Coordinator
Director, Drilling & Completions
Manager, Drilling and Completions
Vice President
Regulatory and Community Affairs Advisor
HSE Advisor
Onsite HSE Advisor TBD Telephone: Email:
2020 NWT ENVIRONMENTAL PROTECTION PLAN PARAMOUNT RESOURCES LTD
5
2.0 HAZARD REVIEW
2.1 A Summary of Studies Undertaken to Identify Environmental Hazards and to Evaluate Risks Relating to the Proposed Work or Activity
A detailed review of the environmental impacts associated with, or potentially associated with all of the activities in the Liard area was performed for the Mackenzie Valley Environmental Impact Review Board (Review Board). A review of the environmental assessment (EA) of the Ranger Oil Limited, Canadian Forest Oil Ltd., and Chevron Canada Resources Limited Integrated P‐66A/N‐61/K‐29 Gas Wells and Pipeline Tie‐in Fort Liard, NWT development proposal was performed, according to the requirements of Part V of the Mackenzie Valley Resource Management Act (MVRMA). http://reviewboard.ca/registry/ea99‐00610086 The development proposal consisted of two gas wells, one produced water injection well, a sour gas pipeline, a produced water pipeline (in a common trench with the gas line), an all season road, and all construction and operation activities associated with the road and the wells. The potential for two more gas wells, sour gas and water pipeline connections, and associated construction and operation activities were also considered. The Review Board reviewed and considered all information provided by the developer, expert advisors, regulatory authorities and the public in conducting the EA. Having considered all the evidence, the Review Board decided according to paragraph 128(1) (b) (ii) of the MRVMA to recommend approval of the development proposal subject to fourteen measures six of which are meant to mitigate potential adverse impact upon the environment. Those that are relevant to the work planned are addressed below. Environmental Impacts Specific to Abandonment
1. Extent if Physical Footprint - This project will use the existing wellsite and winter roads. If a camp is required, it will be located on an existing camp disturbance.
The recommendations and requirements of the Land Use Permit will be followed, along with good environmental and industry practices. Environmental risk or effect from this project: Potential effects of the proposed work or activity on extent of physical footprint is predicted to have a negligible environmental consequence because there will be no new surface disturbance required for this specific project. Paramount will ensure good environmental and industry practices are followed
2. Water Quality - The Review Board recognized previous public concern with the potential for contaminated emissions, including sedimentation, to water. The Review Board recommends that best industry practices be followed to ensure that such emissions are minimized. Environmental risk or effect from this project: A potential environmental hazard from the project is water contamination from a surface spill. Surface water effects are predicted to have a low environmental consequence because there will be no additional disturbance. Operations will be conducted in the winter, when
2020 NWT ENVIRONMENTAL PROTECTION PLAN PARAMOUNT RESOURCES LTD
6
cleanup of any spill will be facilitated prior to any contaminant entering the watershed. Groundwater effects are predicted to be negligible. Paramount has in place an emergency response plan to respond to, report on and clean-up any spills of chemicals, fuels or other harmful substances. Paramount will follow best industry practices to ensure that such emissions are minimized.
3. Air Quality - No flaring is planned as part of the project. A small low pressure, sweet gas head will likely be present in the casing and this will be vented as part of the well kill procedure at the beginning of operations. There is no H2S associated with this well. Environmental risk or effect from this project: There is negligible risk of air contamination due to the nature of the well and the planned operations.
4. Wildlife - Due to the short duration of the project, long term wildlife data collection, monitoring and cumulative effect assessment are not appropriate. Environmental risk or effect from this project: Effects to wildlife habitat are predicted to be negligible due to the fact there will be no increased land disturbance and the proposed work is of short duration.
5. Suspension and Restoration - Immediate activities are the abandonment of five wells. Removal of surplus equipment will occur, and reclamation may occur as part of this program Environmental risk or effect from this project: Effects from this project are predicted to be negligible due to the fact there will be no additional disturbance for the proposed work or activity, beyond the existing wellsite and access roads.
6. Flaring – No flaring is anticipated in this operation Environmental risk or effect from this project: No air quality environmental consequences caused by flaring are anticipated from this project.
2020 NWT ENVIRONMENTAL PROTECTION PLAN PARAMOUNT RESOURCES LTD
7
2.2 A Summary of the Measures to Avoid, Prevent, Reduce or Manage Environmental Risks
The Review Board EA identified measures to avoid, prevent, reduce or manage environmental risks (see summary below). Through the EA, development in the Liard area in the foreseeable future was approved subject to fourteen measures, six of which are meant to mitigate potential adverse impact upon the environment. The measures to avoid, prevent, reduce or manage environmental risks presented in the EA recommended by the MVEIRB have been incorporated into the Liard EPP Program manual. Pertinent sections of the manual are:
• Appendix 1: Fundamental Mitigation (including existing guidelines, best management practices and corporate procedures referenced therein); and
• Appendix 2: Task-specific Mitigation (including existing guidelines, best management practices and corporate procedures referenced therein).
2020 NWT ENVIRONMENTAL PROTECTION PLAN PARAMOUNT RESOURCES LTD
8
3.0 APPLICABLE PROCEDURES
3.1 Critical Structures, Facilities, Equipment & Systems
Structures, facilities, equipment and systems critical to environmental protection are listed in Table 2. Systems in place for their inspection, testing and maintenance include:
• CAODC Service Rig Inspection Form: This industry standard form is used to verify correct and safeinstallation of the service rig. It is completed after rig up and prior to the commencement of operations
• Snubbing equipment is operated and maintained in accordance with DACC IRP #14 (as applicable).
• Boilers and well testing equipment comply with ABSA and BC Safety Authority and are manufacturedin accordance with ASME requirements.
• Fluid storage tanks (excluding small rig tank) are provided with secondary containment and inspectedregularly for leakage
Table 2: List of Structures, Facilities, Equipment and Systems Critical to Environmental Protection
Structure, Facility,Equipment or System
Blow-out Prevention and related systems
Boilers
Containment Tanks
Completion fluid system
Shut down devices
Function
Blow-out prevention and related systems are designed to control underground pressure that has the potential to reach the surface and cause a blow-out.
A closed pressure vessel with a furnace to burn coal, oil, or gas, used to generate steam from water.
A secondary containment system designed to contain leakage and prevent it from impacting the surrounding environment.
The main functions of completions fluids include providing hydrostatic pressure to prevent formation fluids from entering the well bore, keeping the mill cool and clean during milling of cement and mechanical plugs, carrying out cuttings and suspending the cuttings while milling is paused, and the assembly is brought in and out of the hole. The completion fluid used for a particular job is selected to avoid formation damage and to limit corrosion.
Because of the size, speed, and risk involved in the use of rig assist snubbing units and service rigs, safety shutdown systems are used to stop pipe rotation in an emergency
2020 NWT ENVIRONMENTAL PROTECTION PLAN PARAMOUNT RESOURCES LTD
9
3.2 Chemical Selection
The only “process chemical” or “drilling fluid agent” that will be used in this program is Class G Oilwell cement.Although not currently programmed, it is possible that 15% Hydrochloric acid may be needed to facilitate cement squeezing. In that case, "soda ash" (Na2CaO3) will also be required to neutralize any live acid returns. These products are routinely used in the industry and established supplier's operational and safety procedures will be followed.
3.3 Waste Management
A description of equipment and procedures for the treatment, handling and disposal of waste material is provided in 3.3.1 and Table 3 below (extracted from Paramount's Corporate Procedures Waste Management Plan).
3.3.1 Discharge Streams
Discharge streams into the natural environment resulting from the NWT Abandonment program are limited to minor air emissions (venting of head gas in casing). Any significant trapped gas will be flared. Discharge limits for grey & black water are not presented because the onsite supervisor trailer will be self-contained and there will be no discharge of any waste. Completions fluids (containing cement / bridge plug milling solids), will be hauled to the nearest approved Class II Landfill in British Columbia or Alberta.
Table 4: Discharge Streams
Waste Stream Discharge Location
Completions fluids and generated solids (milling of cement plugs, bridge plugs andpossible casing debris)
Trucked out to approved waste facilityLocation: Alberta or British ColumbiaFacility Type: Non-HAZ Industrial Landfill/ Special Waste TreatmentFacility Owner: TBD
Vent to atmosphere. Significant trapped gas will be flared. Minor amounts of sweet natural gas (casing head gas)
Trucked out to approved waste facility Location: Alberta or British ColumbiaFacility Type: Non-HAZ Industrial Landfill/ Special Waste TreatmentFacility Owner: TBD
Spent or Neutralized Acid
2020 NWT ENVIRONMENTAL PROTECTION PLAN PARAMOUNT RESOURCES LTD
10
This page intentionally left blank
2020 NWT ENVIRONMENTAL PROTECTION PLAN PARAMOUNT RESOURCES LTD
11
Table 3: Paramount Resources Ltd. NWT Abandonment Waste Stream and Waste Management Plan.
Because of the small volume of various wastes which may be generated during this activity, a combination waste bin will be provided, and a specialized waste management contractor will handle disposal of the contents at the end of the project
Waste Storage NWT Classification
BC Classification
AB Classification
AER Code
Shipping Name
Class UN # Packing Group
Disposal
Aerosol Cans (flammable)
Waste Bin-HAZ HAZ HAZ DOW WSTCGS AEROSOLS, flammable 2.1 UN1950 - Turnkey management of HAZ
waste provided by contractor
Aerosol Cans (non-flammable)
Waste Bin-HAZ HAZ HAZ DOW EMTCON AEROSOLS, non - flammable 2.2 UN1950 -
Turnkey management of HAZ waste provided by contractor
Barrels, Pails (Completely Empty)
Waste Bin Non-HAZ Non-HAZ Non-DOW EMTCON - - - - Turnkey management of non-HAZ waste provided by contractor
Batteries (Dry Cell) General Recyclable – Various [see
Guideline for the Management of Waste Batteries (GNWT, 1998) for
recommendation]
Non-HAZ Non-HAZ Non-DOW BATT - - - - Turnkey management of non-HAZ waste provided by contractor
Batteries (Dry Cell) HAZ HAZ DOW BATT
Batteries, dry, containing potassium hydroxide
solid, electric storage
8 UN3028 III Turnkey management of non-HAZ waste provided by contractor
Boiler Blowdown Water (contaminated with HAZ material - dependent on boiler chemicals)
Steel Tank HAZ HAZ DOW BLBDWT
Environmentally hazardous
substance, liquid, N.O.S.
9 UN3082 III Service rig contractor to arrange transport & disposal at licenced facility in BC or AB
Boiler Blowdown Water (non-contaminated with HAZ material)
Steel Tank Non-HAZ Non-HAZ Non-DOW BLBDWT - - - - Surface discharge where water is sufficiently cooled that it does not materially affect the snow/ice cover
Cardboard Stockpile Non-HAZ Non-HAZ Non-DOW - - - - - Incinerate daily
Cement Returns Retarded or diluted in steel tank Non-HAZ Non-HAZ Non-DOW Cement - - - - Transport & disposal at
licenced facility in BC or AB
Chemicals (inorganic) Original Containers HAZ HAZ DOW INOCHM Dependent on specific waste characteristics
(consult TDG Regulations) Contact Chemical Waste Exchange
Construction and Demolition Material (uncontaminated)
Stockpile Non-HAZ Non-HAZ Non-DOW CONMAT - - - - Turnkey management of non-HAZ waste provided by contractor
Contaminated Debris and Soil (Chemical/Solvent/Oil/ Produced Water)
Contact Paramount Environmental Dept
SOILCH SOILCO SOILPW
Dependent on specific waste characteristics (consult TDG Regulations)
Contact Paramount Environmental Dept for approved landfill location
Filters – Lube Oil Waste Bin-HAZ
HAZ (depending on flash point and BTEX content)
HAZ (depending on flash point and BTEX content)
DOW (depending on flash point and BTEX content)
FILLUB
Environmentally Hazardous
Substance, Solid N.O.S. (lead)
9 UN3077 III Turnkey management of HAZ waste provided by contractor
Grease Cartridges (Completely Empty) Waste Bin- non HAZ Non-HAZ Non-HAZ Non-DOW EMTCON - - - -
Turnkey management of non-HAZ waste provided by contractor
Hydraulic and Transmission Oil Waste Bin- non HAZ HYDOIL - - - -
Turnkey management of non-HAZ waste provided by contractor
2020 NWT ENVIRONMENTAL PROTECTION PLAN PARAMOUNT RESOURCES LTD
12
Waste Storage NWT Classification
BC Classification
AB Classification
AER Code
Shipping Name
Class UN # Packing Group
Disposal
Kitchen Waste Temporary Waste Receptacle Non-HAZ Non-HAZ Non-DOW - - - - - Incinerate daily
Incinerator (kitchen waste)
General & Industrial non- HAZ Waste Non-HAZ Non-HAZ Non-DOW INCASH - - - -
Turnkey management of non-HAZ waste (ash) provided by contractor
Lead Based Products (Pipe Dope/Greases)
Waste Bin-HAZ HAZ HAZ DOW LDDOPE Dependent on specific waste characteristics (consult TDG Regulations)
Turnkey management of HAZ waste provided by contractor
Lubricating Oil (Hydrocarbon and Synthetic)
Above ground disposal tanks; L&P
Disposal Receptacles
Non-HAZ (unless
containing heavy metals
such as Vanadium or
Lead
Non-HAZ (unless
containing heavy metals
such as Vanadium or
Lead
Non-HAZ (unless
containing heavy metals
such as Vanadium or
Lead
LUBOIL - - - - Turnkey management of HAZ waste provided by contractor
Metal (Scrap) (uncontaminated)
Industrial Recyclable – Scrap Metal Non-HAZ Non-HAZ Non-DOW SMETAL - - - - Recycle location - TBD
Mud Sacks – Drilling Waste Bin- non HAZ Non-HAZ Non-HAZ Non-DOW EMTCON - - - - Turnkey management of non-HAZ waste provided by contractor
Pipe Dope Containers/Brushes (Completely Empty & Dry) Waste Bin- non HAZ Non-HAZ Non-HAZ Non-DOW EMTCON - - - -
Turnkey management of non-HAZ waste provided by contractor
Sewage (Temporary Camps)
Sewage Sump or Storage Tank Non-HAZ Non-HAZ Non-DOW - - - - -
Transport & disposal at licenced facility in BC or AB
Thread Protectors – Casing/Tubing Waste Bin- non HAZ Non-HAZ Non-HAZ Non-DOW THPROT - - - -
Turnkey management of non-HAZ waste provided by contractor
Wash Fluids - Water Steel Tank Testing Required WSHWTE Environmentally
Hazardous Substance
9 UN3082 III Transport & disposal at licenced facility in BC or AB
Water - Grey (Temporary Camp)
Sewage Sump or Grey water holding
tank Non-HAZ Non-HAZ Non-DOW
- - - - - Transport & disposal at licenced facility in BC or AB
2323Wood, untreated (e.g., Dimensional Lumber, Wooden Pallets, Wooden Packing Crates, etc.)
Stockpile Non-HAZ Non-HAZ Non-DOW - - - - -
Open burn (according to a “Permit to Burn” from the Forest Management Division, Environment and Natural Resources, GNWT)
Notes: DOW: Dangerous Oilfield Waste HAZ: Hazardous Packing Group: A group in which dangerous goods are included based on the inherent danger of the dangerous goods. Packing Group I indicates great danger Packing Group II indicates medium danger Packing Group III indicates minor danger
2020 NWT ENVIRONMENTAL PROTECTION PLAN PARAMOUNT RESOURCES LTD
13
4.0 MONITORING COMPLIANCE
4.1 Monitoring Compliance with the EPP
Paramount’s NWT EPP Program is developed and maintained, implemented and improved according to the P OEMS. With respect to monitoring compliance with the NWT Abandonment EPP Program, the POEMS requires regular inspections by Field Supervisors and Managers, an annual audit of the POEMS and an evaluation of Environmental Protection targets through environmental indicators. A summary of inspections, audits and indicators is provided in the subsequent sub-sections and full details can be found in section 3 of the POEMS
4.1.1 Inspections
Inspections are designed to ensure that Field Supervisors and Managers make consistent checks of key components in their work areas and foster good working habits. Paramount maintains procedures for inspections and for establishing and maintaining records of the results. Further information on inspections is provided in section 3 of POEMS.
4.1.2 NWT POEMS Audit
An annual POEMS audit, conducted by the HSE department is required to examine the overall implementation of the POEMS.
4.1.3 Improvement
Environmental indicators help answer the question, “Were the targets met?” Environmental data is collected, validated and presented annually by the Environmental Coordinator, allowing the review and modification of objectives/targets. Paramount will record the extent to which planned objectives and performance criteria have been met and report to the corporation as a whole. The information may be made available to the public.
2020 NWT ENVIRONMENTAL PROTECTION PLAN PARAMOUNT RESOURCES LTD
14
APPENDIX 1: FUNDEMENTAL MITIGATION Fundamental mitigation includes essential measures to eliminate, or at least minimize, negative impacts to air, water, land, and terrestrial species and aquatic species during all activities undertaken as part of the NWT abandonment Project. Note: Only those measures the may apply to the planned operations have been included.
a. LAND AND TERRESTRIAL SPECIES Mitigation measures to minimize negative effects to land and terrestrial species are included in the existing guidelines, best management practices and corporate procedures. Project-specific mitigation measures to minimize negative effects to land and terrestrial species are categorized and listed alphabetically below.
ACCESS MANAGEMENT
Motorized vehicles will travel on approved routes. The use of pipeline ROWs and the creation of ancillary access will be minimized. The recreational use of all-terrain vehicles (ATVs) and snowmobiles by construction personnel will not be permitted in the project area.
BORROW PITS
A Territorial Quarrying Regulations Quarry Permit from INAC is required to construct a borrow pit. Borrow pits will be re contoured to a stable profile (e.g. back sloped to a slope ratio not less than 3:1) and the salvaged topsoil / organic material replaced
CLEANUP Good housekeeping will be practiced. The target date for final cleanup will be immediately after the project is complete, when feasible, or as directed by the Land Use Inspector
EQUIPMENT MAINTENANCE – INVASIVE SPECIES
Construction and reclamation equipment (i.e., equipment used to “break ground”) will be cleaned before entering the Fort Liard, NWT Project area to ensure weed free condit ions. Similarly, materials such as pipe should be sourced from storage yards free of weeds. Equipment passing through areas identified as having a weed problem will be cleaned (e.g., steam/high pressure water, compressed air, etc.) prior to continuing work.
SNOW CLEARING To minimize impact on wildlife species abundance, snow removal will be limited to only that necessary for safe and efficient work.
SOIL CONSERVATION – FROST DEPTH
On work areas free of timber, snow will be packed onto the rough, natural surface with light-weight tracked vehicles to drive frost into the ground. To achieve sufficient snow-pack depth, thus a protective surface barrier, corduroy may be added to the snow. As well, water may be used to build-up the protective surface barrier. When working on wet, muskeg or permafrost terrain, ensure sufficient frost penetration is present to avoid terrain damage. Recommended minimum frost
2020 NWT ENVIRONMENTAL PROTECTION PLAN PARAMOUNT RESOURCES LTD
15
depths are: (w) muskeg – 45 cm; (x) loam soils – 15 cm; (y) saturated silts or clays – 30 cm; and (z) sloughs or shallow water – 90 cm Erosion will be mitigated in areas disturbed by Project activities by various methods, as appropriate (e.g., check dams, contouring, cross ditches, cross berms, ditch plugs, diversion berms, positive drainage, seeding, silt fence, slash rollback, swales, etc.).
2020 NWT ENVIRONMENTAL PROTECTION PLAN PARAMOUNT RESOURCES LTD
16
b. LAND USERS Project-specific mitigation measures to minimize negative effects to land users are listed below.
TRAPPERS
The appropriate the appropriate government and indigenous representatives will be notified by Paramount of the construction schedule as soon as the schedule is determined. Ideally, this should be at least two (2) weeks prior to approved clearing. If possible, arrangements will be made to have the trap line owners clearly identify trapping access routes and equipment (e.g., remove their traps and snares, etc.) in the vicinity of the right of way prior to clearing to ensure that they are protected during construction.
TRAILS Trails will not be blocked.
c. WILDLIFE AND WILDLIFE HABITAT Mitigation measures to minimize negative effects to wildlife and wildlife habitat are included in the existing guidelines and best management practices presented in the bulleted list below.
• GNWT. 2017. Safety in Grizzly and Black Bear Country. Department of Environment and Natural Resources.
• Canadian Pipeline Environment Committee. 2004. The pipeline industry and the Migratory Birds Convention Act.
Project-specific mitigation measures to minimize negative effects to wildlife and wildlife habitat are categorized and listed alphabetically below.
AVOIDANCE
Vehicle and equipment operators will be instructed to maintain appropriate speeds and to be aware of potential encounters with wildlife. If wildlife is encountered, it will not be fed or harassed and will be given an opportunity to disperse at its own rate. Pet dogs will be prohibited.
DENS / NESTS Dens and nests, even if inactive, will not be knowingly disturbed if it can be avoided.
HUNTING Project personnel are forbidden to carry firearms (except with written permission from Paramount) and to hunt.
REPORTING
Any incidents with nuisance wildlife or collisions with wildlife will be reported to GNWT, ENR. In the event that bear dens are encountered within the Project area, GNWT, ENR will be notified.
SNOW MANAGEMENT -
WINDROWS
Should snow be removed from access corridors, windrows at the edges of the road will be constructed. The windrows will have gaps (8 m) at regular intervals (every 300 to 500 m) to allow animal movement and to provide escape routes.
2020 NWT ENVIRONMENTAL PROTECTION PLAN PARAMOUNT RESOURCES LTD
17
d. SPECIES AT RISK OR SPECIES OF SPECIAL STATUS AND RELATED HABITAT Project-specific mitigation measures to minimize negative effects to species at risk are categorized and listed alphabetically below. CARIBOU Existing Disturbance: Paramount will integrate new development with other
existing and/or planned activities, such as using existing clearings, common corridors, parallel corridors, etc. to the extent practicable.
Timing: Late winter and spring are the times of year when caribou (especially pregnant cows) are most likely to be negatively affected by human activity. Therefore, Paramount will adopt an “early in, early out” philosophy for winter development activity.
Noise: Paramount will minimize extraneous noise sources and use adequate noise attenuation on engines.
Line-of-Site: For any new access, Paramount will minimize lines- of-site from access roads using “dog-legs” (see figure below) or other techniques.
Source: Yukon Energy, Mines and Resources (2006)
Access Management: Paramount will create barriers (e.g. felled trees, signage, etc.) to discourage access from roads to pipeline rights-of-way and seismic lines.
2020 NWT ENVIRONMENTAL PROTECTION PLAN PARAMOUNT RESOURCES LTD
18
Support Other Initiatives: The following initiatives will support the Action Plan: Boreal Woodland Caribou Conservation in the Northwest Territories 2010–2015 (Prepared by GNWT – ENR):
Paramount will continue to track its footprint by making available “as-built” maps of the Fort Liard Project area.
Paramount, among other partners, is supporting scientific research entitled, “Development of ecologically-based criteria to assess the impact and recovery of seismic lines”, which is being conducted by Dr. Erin Bayne, Assistant Professor with the Integrated Landscape Management Group at the University of Alberta.
WOLVERINE To mitigate potential impacts to wolverine, Paramount will scout sites prior to undertaking activities that may impact active natal denning habitat. In the event that wolverines or active natal denning habitat is observed near sites, activity will be minimized so as not to disturb the animals and the appropriate authorities will be notified.
2020 NWT ENVIRONMENTAL PROTECTION PLAN PARAMOUNT RESOURCES LTD
19
e. WATER AND AQUATIC SPECIES Mitigation measures to minimize negative effects to water and aquatic species are included in the existing guidelines and best management practices presented in the bulleted list below.
• DFO Protocol for Water Withdrawal for Oil & Gas Activities in the Northwest Territories and Changes to DFO Protocol for Winter Water Withdrawal in the NWT, except where terms and conditions for withdrawal are already in place (i.e., existing Water Licences).
• DFO (Fisheries and Oceans Canada). 1995. Freshwater Intake End-of-Pipe Fish Screen Guidelines
Project-specific mitigation measures to minimize negative effects to water and aquatic species are categorized and listed alphabetically below.
FOREIGN MATERIAL Trees will not be purposely felled into water bodies. Likewise, slash, debris, rocks and soil will not be knowingly introduced into a water body.
GRADING Grade away from watercourses to minimize introduction of soil and organic debris. No windrowed or fill material shall be placed in the watercourses during grading.
GROUNDWATER If water wells are used, care will be taken to ensure water withdrawal is completed at a rate to protect water well integrity
SETBACK DISTANCES
Paramount will observe setback distances of 100m from the edge of a disturbance to the edge of a watercourse / water body, except when a watercourse / water body is being crossed (see DFO Northwest Territories Operational Statements). Where necessary, alternative setbacks will be determined through consultation with the MVLWB.
WETLAND RESTORATION
Wetlands will be restored to approximate their pre-construction profile. Revegetation will be through natural encroachment. Peatland areas will not be seeded or fertilized.
WATER WITHDRAWL FROM
WATERCOURSES
Water will be withdrawn from watercourses, as per DFO Northwest Territories Operational Statements:
• the withdrawal of any water will not exceed 10% of the instantaneous flow, in order to maintain existing fish habitat and
• water flow is maintained under the ice, where this naturally occurs. Reference Yukon Energy, Mines and Resources. 2006. Oil & Gas Best Management Practices Seismic Exploration. 37pp. Available online at: http://www.emr.gov.yk.ca/oilandgas/pdf/bmp_seismic.pdf
2020 NWT ENVIRONMENTAL PROTECTION PLAN PARAMOUNT RESOURCES LTD
20
APPENDIX 2: TASK SPECFIC MITIGATION Task‐specific mitigation includes essential measures to eliminate, or at least minimize, negative impacts to air; land and terrestrial species and water and aquatic species during specific activities undertaken as part of the NWT Abandonment Project.
a. TEMPORARY CAMPS Project-specific mitigation measures to minimize negative effects to the environment associated with temporary camps are categorized and listed alphabetically below.
LOCATION Campsites will coincide with previously cleared land, or natural clearings, on relatively level terrain 100m from any watercourse, where possible. No new campsites are planned.
CONSTRUCTION
Depending on the infrastructure required (e.g., trailers, sewage sumps, welding shop, vehicle parking, etc.), an area 40m x 70m to 100m x 100m will be cleared for temporary camps. Slash will be windrowed at the camp boundaries and used for rollback during site reclamation. Snow will be used to level minor irregularities on the surface as much as possible. Vehicles will be used to compact the insulating snow cover to promote deep frost penetration.
EROSION PREVENTION
Site stability at temporary campsites will be assessed within one year after construction. If unstable, appropriate corrective action will be undertaken as soon as practical to stabilize the site, thereby minimizing erosion.
2020 NWT ENVIRONMENTAL PROTECTION PLAN PARAMOUNT RESOURCES LTD
21
APPENDIX 3: TYPE “A” LAND USE PERMIT AND TYPE “B” WATER LICENCE
2020 NWT ENVIRONMENTAL PROTECTION PLAN PARAMOUNT RESOURCES LTD
22
Liard East Current Land Use Permit MV2013a0012
Renewal Application MV2020A0010
2020 NWT ENVIRONMENTAL PROTECTION PLAN PARAMOUNT RESOURCES LTD
23
Liard East Water Licence MV2013L1-0002
Renewal Application MV2020L1-0007
2020 NWT ENVIRONMENTAL PROTECTION PLAN PARAMOUNT RESOURCES LTD
24
Lafarge Portland Cement (cement) Safety Data Sheet according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations Revision Date: 04/23/2015 Date of issue: 03/01/2014 Supersedes Date: 03/01/2014 Version: 2.0
04/23/2015 EN (English US) 1/11
SECTION 1: IDENTIFICATION Product Identifier Product Name: Lafarge Portland Cement (cement) Synonyms: Cement, Portland Cement, Hydraulic Cement, Oil Well Cement, Trinity® White Cement, Antique White Cement, Portland Limestone Cement, Portland Cement Type I, IA, IE, II, I/II, IIA, II L.A., III, IIIA, IV, IVA, V, VA, 10, 20, 30, 40, 50, GU, GUL, MS, MH, HE, LH, HS, OWH, OWG Cement, OW Class G HSR, InfiniCem™ Note: This SDS covers many types of Portland cement. Individual composition of hazardous constituents will vary between types of Portland cement.
Intended Use of the Product Cement is used as a binder in concrete and mortars that are widely used in construction. Cement is distributed in bags, totes and bulk shipment.
Name, Address, and Telephone of the Responsible Party Company Lafarge North America Inc. 8700 West Bryn Mawr Avenue, Suite 300 Chicago, IL 60631 Information: 773-372-1000 (9am to 5pm CST) email: [email protected] Website: www.lafarge-na.com
Emergency Telephone Number Emergency number : 1-800-451-8346 (3E Hotline)
SECTION 2: HAZARDS IDENTIFICATION Classification of the Substance or Mixture Classification (GHS-US) Skin Corr. 1C H314 Eye Dam. 1 H318 Skin Sens. 1 H317 Carc. 1A H350 STOT SE 3 H335
Label Elements GHS-US Labeling Hazard Pictograms (GHS-US) :
GHS05
GHS07
GHS08
Signal Word (GHS-US) : Danger
Hazard Statements (GHS-US) : H314 - Causes severe skin burns and eye damage H317 - May cause an allergic skin reaction H318 - Causes serious eye damage H335 - May cause respiratory irritation H350 - May cause cancer (Inhalation)
Precautionary Statements (GHS-US) : P201 - Obtain special instructions before use. P202 - Do not handle until all safety precautions have been read and understood. P260 - Do not breathe dust. P264 - Wash hands, forearms, and exposed areas thoroughly after handling. P271 - Use only outdoors or in a well-ventilated area. P272 - Contaminated work clothing should not be allowed out of the workplace. P280 - Wear protective gloves, protective clothing, face protection, eye protection. P301+P330+P331 - IF SWALLOWED: rinse mouth. Do NOT induce vomiting. P303+P361+P353+P352 - IF ON SKIN (or hair): Remove/Take off immediately all
Lafarge Portland Cement (cement) Safety Data Sheet according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
04/23/2015 EN (English US) 2/11
contaminated clothing. Rinse skin with water/shower. Wash with plenty of soap and water. P304+P340 - IF INHALED: Remove person to fresh air and keep at rest in a position comfortable for breathing. P305+P351+P338 - If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P310 - Immediately call a POISON CENTER or doctor/physician. P321 - Specific treatment (see Section 4). P333+P313 - If skin irritation or rash occurs: Get medical advice/attention. P362+P364 - Take off contaminated clothing and wash it before reuse. P403+P233 - Store in a well-ventilated place. Keep container tightly closed. P405 - Store locked up. P501 - Dispose of contents/container according to local, regional, state, national, territorial, provincial, and international regulations.
Other Hazards Other Hazards Not Contributing to the Classification: Inhalation can cause serious, potentially irreversible lung/respiratory tract tissue damage due to chemical (caustic) burns, including third degree burns. Individuals with lung disease (e.g. bronchitis, emphysema, COPD, pulmonary disease) or sensitivity to hexavalent chromium can be aggravated by exposure.
Unknown Acute Toxicity (GHS-US) Not available
SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS Mixture Name Product identifier % (w/w) Classification (GHS-US)
Cement, portland, chemicals (CAS No) 65997-15-1 100 Skin Irrit. 2, H315 Eye Dam. 1, H318 Skin Sens. 1, H317 STOT SE 3, H335
Limestone (CAS No) 1317-65-3 0 - 15 Not classified
Gypsum (Ca(SO4).2H2O) (CAS No) 13397-24-5 2 - 10 Not classified
Calcium oxide (CAS No) 1305-78-8 0 - 5 Skin Corr. 1C, H314 Eye Dam. 1, H318 STOT SE 3, H335
Magnesium oxide (MgO) (CAS No) 1309-48-4 0 - 4 Not classified
Quartz (CAS No) 14808-60-7 0 - 0.2 Carc. 1A, H350 STOT SE 3, H335 STOT RE 1, H372
Full text of H-phrases: see section 16
SECTION 4: FIRST AID MEASURES Description of First Aid Measures General: Never give anything by mouth to an unconscious person. If you feel unwell, seek medical advice (show the label if possible). Inhalation: When symptoms occur: go into open air and ventilate suspected area. Keep at rest and in a position comfortable for breathing. If you feel unwell, seek medical advice. Skin Contact: Remove contaminated clothing. Immediately flush skin with plenty of water for at least 60 minutes. Immediately call a POISON CENTER or doctor/physician. Eye Contact: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing for at least 60 minutes. Immediately call a POISON CENTER or doctor/physician. Ingestion: Rinse mouth. Do not induce vomiting. Immediately call a POISON CENTER or doctor/physician.
Most Important Symptoms and Effects Both Acute and Delayed General: Corrosive to eyes, respiratory system and skin. Exposure may produce an allergic reaction.
Lafarge Portland Cement (cement) Safety Data Sheet according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
04/23/2015 EN (English US) 3/11
Inhalation: The three types of silicosis include: 1) Simple chronic silicosis – which results from long-term exposure (more than 20 years) to low amounts of respirable crystalline silica. Nodules of chronic inflammation and scarring provoked by the respirable crystalline silica form in the lungs and chest lymph nodes. This disease may feature breathlessness and may resemble chronic obstructive pulmonary disease (COPD); 2) Accelerated silicosis – occurs after exposure to larger amounts of respirable crystalline silica over a shorter period of time (5-15 years); 3) Acute silicosis – results from short-term exposure to very large amounts of respirable crystalline silica. The lungs become very inflamed and may fill with fluid, causing severe shortness of breath and low blood oxygen levels. Inflammation, scarring, and symptoms progress faster in accelerated silicosis than in simple silicosis. Progressive massive fibrosis may occur in simple or accelerated silicosis, but is more common in the accelerated form. Progressive massive fibrosis results from severe scarring and leads to the destruction of normal lung structures. Some studies show that exposure to respirable crystalline silica (without silicosis) or that the disease silicosis may be associated with the increased incidence of several autoimmune disorders such as scleroderma (thickening of the skin), systemic lupus erythematosus, rheumatoid arthritis and diseases affecting the kidneys. Silicosis increases the risk of tuberculosis. Some studies show an increased incidence of chronic kidney disease and end-stage renal disease in workers exposed to respirable crystalline silica. Corrosive to the respiratory tract. Skin Contact: Cement may cause dry skin, discomfort, irritation, severe burns, and dermatitis. Exposure of sufficient duration to wet cement, or to dry cement on moist areas of the body, can cause serious, potentially irreversible damage to skin, eye, respiratory and digestive tracts due to chemical (caustic) burns, including third degree burns. A skin exposure may be hazardous even if there is no pain or discomfort. Cement is capable of causing dermatitis by irritation and allergy. Skin affected by dermatitis may include symptoms such as, redness, itching, rash, scaling, and cracking. Irritant dermatitis is caused by the physical properties of cement including alkalinity and abrasion. Allergic contact dermatitis is caused by sensitization to hexavalent chromium (chromate) present in cement. The reaction can range from a mild rash to severe skin ulcers. Persons already sensitized may react to the first contact with cement. Others may develop allergic dermatitis after years of repeated contact with cement. Eye Contact: Airborne dust may cause immediate or delayed irritation or inflammation. Eye contact with large amounts of dry powder or with wet cement can cause moderate eye irritation, chemical burns and blindness. Eye exposures require immediate first aid and medical attention to prevent significant damage to the eye. Ingestion: May cause burns or irritation of the linings of the mouth, throat, and gastrointestinal tract. Chronic Symptoms: If dust is generated, repeated exposure through inhalation may cause cancer or lung disease.
Indication of Any Immediate Medical Attention and Special Treatment Needed If exposed or concerned, get medical advice and attention.
SECTION 5: FIRE-FIGHTING MEASURES Extinguishing Media
Special Hazards Arising From the Substance or Mixture
Advice for Firefighters Precautionary Measures Fire: Exercise caution when fighting any chemical fire. Firefighting Instructions: Do not get water inside containers. Do not apply water stream directly at source of leak. Protection During Firefighting: Do not enter fire area without proper protective equipment, including respiratory protection. Hazardous Combustion Products: None.
Reference to Other Sections Refer to section 9 for flammability properties.
SECTION 6: ACCIDENTAL RELEASE MEASURES Personal Precautions, Protective Equipment and Emergency Procedures
General Measures: Do not breathe dust. Do not get in eyes, on skin, or on clothing. For Non-Emergency Personnel Protective Equipment: Use appropriate personal protection equipment (PPE). Emergency Procedures: Evacuate unnecessary personnel.
Suitable Extinguishing Media: Use extinguishing media appropriate for surrounding fire. Unsuitable Extinguishing Media: Do not use a heavy water stream. Use of heavy stream of water may spread fire.
Fire Hazard: Not flammable. Explosion Hazard: Product is not explosive. Reactivity: Wet cement is alkaline and is incompatible with acids, ammonium salts and aluminum metal. Cement dissolves in hydrofluoric acid, producing corrosive silicon tetrafluoride gas. Cement reacts with water to form silicates and calcium hydroxide. Silicates react with powerful oxidizers such as fluorine, boron trifluoride, chlorine trifluoride, manganese trifluoride, and oxygen difluoride.
Lafarge Portland Cement (cement) Safety Data Sheet according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
04/23/2015 EN (English US) 4/11
For Emergency Personnel Protective Equipment: Equip cleanup crew with proper protection. Emergency Procedures: Ventilate area.
Environmental Precautions
Prevent entry to sewers and public waters.
Methods and Material for Containment and Cleaning Up
For Containment: Place spilled material into a container. Avoid actions that cause the cement to become airborne. Avoid inhalation of cement and contact with skin. Wear appropriate protective equipment as described in Section 8. Scrape wet cement and place in container. Allow material to dry or solidify before disposal. Do not wash cement down sewage and drainage systems or into bodies of water (e.g. streams). Methods for Cleaning Up: Avoid actions that cause dust to become airborne during clean-up such as dry sweeping or using compressed air. Use HEPA vacuum or thoroughly wet with water to clean-up dust. Use PPE described in Section 8.
Reference to Other Sections See heading 8, Exposure Controls and Personal Protection. Concerning disposal elimination after cleaning, see item 13.
SECTION 7: HANDLING AND STORAGE Precautions for Safe Handling Additional Hazards When Processed: Keep bulk and bagged cement dry until used. Stack bagged material in a secure manner to prevent falling. Bagged cement is heavy and poses risks such as sprains and strains to the back, arms, shoulders and legs during lifting and mixing. Handle with care and use appropriate control measures. Engulfment hazard. To prevent burial or suffocation, do not enter a confined space, such as a silo, bin, bulk truck, or other storage container or vessel that stores or contains cement. Cement can buildup or adhere to the walls of a confined space. The cement can release, collapse or fall unexpectedly. Properly ground all pneumatic conveyance systems. The potential exists for static build-up and static discharge when moving cement powders through a plastic, non-conductive, or non-grounded pneumatic conveyance system. The static discharge may result in damage to equipment and injury to workers. Cutting, crushing or grinding hardened cement, concrete or other crystalline silica-bearing materials will release respirable crystalline silica. Use all appropriate measures of dust control or suppression, and Personal Protective Equipment (PPE) described in Section 8 below. Hygiene Measures: Handle in accordance with good industrial hygiene and safety procedures. Wash hands and other exposed areas with mild soap and water before eating, drinking, or smoking and again when leaving work. Wash contaminated clothing before reuse.
Conditions for Safe Storage, Including Any Incompatibilities Storage Conditions: Store in a dry, cool and well-ventilated place. Keep container closed when not in use. Incompatible Materials: Wet cement is alkaline and is incompatible with acids, ammonium salts and aluminum metal. Cement dissolves in hydrofluoric acid, producing corrosive silicon tetrafluoride gas. Cement reacts with water to form silicates and calcium hydroxide. Silicates react with powerful oxidizers such as fluorine, boron trifluoride, chlorine trifluoride, manganese trifluoride, and oxygen difluoride. Storage Temperature: Unlimited
Specific End Use(s) Cement is used as a binder in concrete and mortars that are widely used in construction. Cement is distributed
in bags, totes and bulk shipment.
SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION Control Parameters Limestone (1317-65-3)
Mexico OEL TWA (mg/m³) 10 mg/m³
Mexico OEL STEL (mg/m³) 20 mg/m³
USA OSHA OSHA PEL (TWA) (mg/m³) 5 mg/m³
USA NIOSH NIOSH REL (TWA) (mg/m³) 5 mg/m³
Alberta OEL TWA (mg/m³) 10 mg/m³
British Columbia OEL STEL (mg/m³) 20 mg/m³
British Columbia OEL TWA (mg/m³) 3 mg/m³
New Brunswick OEL TWA (mg/m³) 10 mg/m³
Nunavut OEL TWA (mg/m³) 10 mg/m³ (total mass)
Northwest Territories OEL TWA (mg/m³) 10 mg/m³ (total mass)
Québec VEMP (mg/m³) 10 mg/m³ (Limestone, containing no Asbestos and <1% Crystalline silica)
Lafarge Portland Cement (cement) Safety Data Sheet according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
04/23/2015 EN (English US) 5/11
Saskatchewan OEL STEL (mg/m³) 20 mg/m³
Saskatchewan OEL TWA (mg/m³) 10 mg/m³
Yukon OEL STEL (mg/m³) 20 mg/m³
Yukon OEL TWA (mg/m³) 10 mg/m³
Cement, portland, chemicals (65997-15-1)
Mexico OEL TWA (mg/m³) 10 mg/m³
Mexico OEL STEL (mg/m³) 20 mg/m³
USA ACGIH ACGIH TWA (mg/m³) 1 mg/m³
USA OSHA OSHA PEL (TWA) (mg/m³) 5 mg/m³
USA NIOSH NIOSH REL (TWA) (mg/m³) 5 mg/m³
USA IDLH US IDLH (mg/m³) 5000 mg/m³
Alberta OEL TWA (mg/m³) 10 mg/m³
British Columbia OEL TWA (mg/m³) 3 mg/m³ (particulate matter containing no Asbestos and <1% Crystalline silica)
Manitoba OEL TWA (mg/m³) 1 mg/m³ (particulate matter containing no Asbestos and <1% Crystalline silica)
New Brunswick OEL TWA (mg/m³) 10 mg/m³
Newfoundland & Labrador OEL TWA (mg/m³) 1 mg/m³ (particulate matter containing no Asbestos and <1% Crystalline silica)
Nova Scotia OEL TWA (mg/m³) 1 mg/m³ (particulate matter containing no Asbestos and <1% Crystalline silica)
Nunavut OEL TWA (mg/m³) 10 mg/m³ (total mass)
Northwest Territories OEL TWA (mg/m³) 10 mg/m³ (total mass)
Ontario OEL TWA (mg/m³) 1 mg/m³ (containing no Asbestos and <1% Crystalline silica)
Prince Edward Island OEL TWA (mg/m³) 1 mg/m³ (particulate matter containing no Asbestos and <1% Crystalline silica)
Québec VEMP (mg/m³) 5 mg/m³ (containing no Asbestos and <1% Crystalline silica)
Saskatchewan OEL STEL (mg/m³) 20 mg/m³
Saskatchewan OEL TWA (mg/m³) 10 mg/m³
Yukon OEL STEL (mg/m³) 20 mg/m³
Yukon OEL TWA (mg/m³) 10 mg/m³
Gypsum (Ca(SO4).2H2O) (13397-24-5)
Mexico OEL TWA (mg/m³) 10 mg/m³
USA ACGIH ACGIH TWA (mg/m³) 10 mg/m³
USA OSHA OSHA PEL (TWA) (mg/m³) 5 mg/m³
USA NIOSH NIOSH REL (TWA) (mg/m³) 5 mg/m³
Alberta OEL TWA (mg/m³) 10 mg/m³
British Columbia OEL STEL (mg/m³) 20 mg/m³
British Columbia OEL TWA (mg/m³) 3 mg/m³
Manitoba OEL TWA (mg/m³) 10 mg/m³
Newfoundland & Labrador OEL TWA (mg/m³) 10 mg/m³
Nova Scotia OEL TWA (mg/m³) 10 mg/m³
Nunavut OEL TWA (mg/m³) 10 mg/m³ (total mass)
Northwest Territories OEL TWA (mg/m³) 10 mg/m³ (total mass)
Ontario OEL TWA (mg/m³) 10 mg/m³
Prince Edward Island OEL TWA (mg/m³) 10 mg/m³
Québec VEMP (mg/m³) 5 mg/m³ (containing no Asbestos and <1% Crystalline silica)
Saskatchewan OEL STEL (mg/m³) 20 mg/m³
Saskatchewan OEL TWA (mg/m³) 10 mg/m³
Yukon OEL STEL (mg/m³) 20 mg/m³
Yukon OEL TWA (mg/m³) 10 mg/m³
Lafarge Portland Cement (cement) Safety Data Sheet according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
04/23/2015 EN (English US) 6/11
Calcium oxide (1305-78-8)
Mexico OEL TWA (mg/m³) 2 mg/m³
USA ACGIH ACGIH TWA (mg/m³) 2 mg/m³
USA OSHA OSHA PEL (TWA) (mg/m³) 5 mg/m³
USA NIOSH NIOSH REL (TWA) (mg/m³) 2 mg/m³
USA IDLH US IDLH (mg/m³) 25 mg/m³
Alberta OEL TWA (mg/m³) 2 mg/m³
British Columbia OEL TWA (mg/m³) 2 mg/m³
Manitoba OEL TWA (mg/m³) 2 mg/m³
New Brunswick OEL TWA (mg/m³) 2 mg/m³
Newfoundland & Labrador OEL TWA (mg/m³) 2 mg/m³
Nova Scotia OEL TWA (mg/m³) 2 mg/m³
Nunavut OEL STEL (mg/m³) 4 mg/m³
Nunavut OEL TWA (mg/m³) 2 mg/m³
Northwest Territories OEL STEL (mg/m³) 4 mg/m³
Northwest Territories OEL TWA (mg/m³) 2 mg/m³
Ontario OEL TWA (mg/m³) 2 mg/m³
Prince Edward Island OEL TWA (mg/m³) 2 mg/m³
Québec VEMP (mg/m³) 2 mg/m³
Saskatchewan OEL STEL (mg/m³) 4 mg/m³
Saskatchewan OEL TWA (mg/m³) 2 mg/m³
Yukon OEL STEL (mg/m³) 4 mg/m³
Yukon OEL TWA (mg/m³) 2 mg/m³
Magnesium oxide (MgO) (1309-48-4)
Mexico OEL TWA (mg/m³) 10 mg/m³
USA ACGIH ACGIH TWA (mg/m³) 10 mg/m³
USA OSHA OSHA PEL (TWA) (mg/m³) 15 mg/m³
USA IDLH US IDLH (mg/m³) 750 mg/m³
Alberta OEL TWA (mg/m³) 10 mg/m³
British Columbia OEL STEL (mg/m³) 10 mg/m³
British Columbia OEL TWA (mg/m³) 3 mg/m³
Manitoba OEL TWA (mg/m³) 10 mg/m³
New Brunswick OEL TWA (mg/m³) 10 mg/m³
Newfoundland & Labrador OEL TWA (mg/m³) 10 mg/m³
Nova Scotia OEL TWA (mg/m³) 10 mg/m³
Nunavut OEL STEL (mg/m³) 20 mg/m³
Nunavut OEL TWA (mg/m³) 10 mg/m³
Northwest Territories OEL STEL (mg/m³) 20 mg/m³
Northwest Territories OEL TWA (mg/m³) 10 mg/m³
Ontario OEL TWA (mg/m³) 10 mg/m³
Prince Edward Island OEL TWA (mg/m³) 10 mg/m³
Québec VEMP (mg/m³) 10 mg/m³
Saskatchewan OEL STEL (mg/m³) 20 mg/m³
Saskatchewan OEL TWA (mg/m³) 10 mg/m³
Yukon OEL STEL (mg/m³) 10 mg/m³
Yukon OEL TWA (mg/m³) 10 mg/m³
Quartz (14808-60-7)
Mexico OEL TWA (mg/m³) 0.1 mg/m³
USA ACGIH ACGIH TWA (mg/m³) 0.025 mg/m³
USA OSHA OSHA PEL (STEL) (mg/m³) 250 mppcf/%SiO2+5, 10mg/m3/%SiO2+2
USA NIOSH NIOSH REL (TWA) (mg/m³) 0.05 mg/m³
Lafarge Portland Cement (cement) Safety Data Sheet according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
04/23/2015 EN (English US) 7/11
USA IDLH US IDLH (mg/m³) 50 mg/m³
Alberta OEL TWA (mg/m³) 0.025 mg/m³
British Columbia OEL TWA (mg/m³) 0.025 mg/m³
Manitoba OEL TWA (mg/m³) 0.025 mg/m³
New Brunswick OEL TWA (mg/m³) 0.1 mg/m³
Newfoundland & Labrador OEL TWA (mg/m³) 0.025 mg/m³
Nova Scotia OEL TWA (mg/m³) 0.025 mg/m³
Nunavut OEL TWA (mg/m³) 0.3 mg/m³ (total mass)
Northwest Territories OEL TWA (mg/m³) 0.3 mg/m³ (total mass)
Ontario OEL TWA (mg/m³) 0.10 mg/m³ (designated substances regulation)
Prince Edward Island OEL TWA (mg/m³) 0.025 mg/m³
Québec VEMP (mg/m³) 0.1 mg/m³
Saskatchewan OEL TWA (mg/m³) 0.05 mg/m³
Yukon OEL TWA (mg/m³) 300 particle/mL
Exposure Controls Appropriate Engineering Controls: Emergency eye wash fountains and safety showers should be available in the immediate vicinity of any potential exposure. Use local exhaust or general dilution ventilation or other suppression methods to maintain dust levels below exposure limits. Power equipment should be equipped with proper dust collection devices. Personal Protective Equipment: Gloves. In case of dust production: protective goggles. Dust formation: dust mask.
Materials for Protective Clothing: Chemically resistant materials and fabrics. Hand Protection: Wear gloves impervious to water to prevent skin contact. Do not rely on barrier creams, in place of impervious gloves. Eye Protection: Wear ANSI approved glasses or safety goggles when handling dust to prevent contact with eyes. Wearing contact lenses when using Limestone and Dolomite, under dusty conditions, is not recommended. Skin and Body Protection: Wear gloves, boot covers and protective clothing impervious to water to prevent skin contact. Do not rely on barrier creams, in place of impervious gloves. Respiratory Protection: Wear a NIOSH approved respirator that is properly fitted and is in good condition when exposed to dust above exposure limits. Other Information: When using, do not eat, drink or smoke
SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES Information on Basic Physical and Chemical Properties Physical State : Solid
Appearance : Gray, off white or white powder
Odor : Odorless
Odor Threshold : Not available
pH : 12 - 13 (in water)
Relative Evaporation Rate (butylacetate=1) : Not available
Melting Point : Not available
Freezing Point : Not available
Boiling Point : > 1000 °C (> 1832 °F)
Flash Point : Not available
Auto-ignition Temperature : Not available
Decomposition Temperature : Not available
Flammability (solid, gas) : Not available
Lower Flammable Limit : Not available
Upper Flammable Limit : Not available
Vapor Pressure : Not available
Lafarge Portland Cement (cement) Safety Data Sheet according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
04/23/2015 EN (English US) 8/11
Relative Vapor Density at 20 °C : Not available
Relative Density/Specific Gravity : 3.15
Solubility : Water: 0.1 - 1 % (slightly soluble)
Partition coefficient: n-octanol/water : Not available
Viscosity : Not available
Explosion Data – Sensitivity to Mechanical Impact : Not expected to present an explosion hazard due to mechanical impact.
Explosion Data – Sensitivity to Static Discharge : Not expected to present an explosion hazard due to static discharge.
SECTION 10: STABILITY AND REACTIVITY Reactivity: Wet cement is alkaline and is incompatible with acids, ammonium salts and aluminum metal. Cement dissolves in hydrofluoric acid, producing corrosive silicon tetrafluoride gas. Cement reacts with water to form silicates and calcium hydroxide. Silicates react with powerful oxidizers such as fluorine, boron trifluoride, chlorine trifluoride, manganese trifluoride, and oxygen difluoride. Chemical Stability: Stable under recommended handling and storage conditions (see section 7). Possibility of Hazardous Reactions: Hazardous polymerization will not occur. Conditions to Avoid: Extremely high or low temperatures. Incompatible materials. Incompatible Materials: Acids. Ammonium salts. Aluminum. Hydrofluoric acid. Water. Oxidizers. Hazardous Decomposition Products: None known.
SECTION 11: TOXICOLOGICAL INFORMATION Information on Toxicological Effects - Product
LD50 and LC50 Data: Not available Skin Corrosion/Irritation: Causes severe skin burns and eye damage. (pH: 12 - 13 (in water)) Serious Eye Damage/Irritation: Causes serious eye damage. (pH: 12 - 13 (in water)) Respiratory or Skin Sensitization: May cause an allergic skin reaction. Germ Cell Mutagenicity: Not classified Teratogenicity: Not available Carcinogenicity: May cause cancer (Inhalation). Specific Target Organ Toxicity (Repeated Exposure): Not classified Reproductive Toxicity: Not classified Specific Target Organ Toxicity (Single Exposure): May cause respiratory irritation. Aspiration Hazard: Not classified Symptoms/Injuries After Inhalation: The three types of silicosis include: 1) Simple chronic silicosis – which results from long-term exposure (more than 20 years) to low amounts of respirable crystalline silica. Nodules of chronic inflammation and scarring provoked by the respirable crystalline silica form in the lungs and chest lymph nodes. This disease may feature breathlessness and may resemble chronic obstructive pulmonary disease (COPD); 2) Accelerated silicosis – occurs after exposure to larger amounts of respirable crystalline silica over a shorter period of time (5-15 years); 3) Acute silicosis – results from short-term exposure to very large amounts of respirable crystalline silica. The lungs become very inflamed and may fill with fluid, causing severe shortness of breath and low blood oxygen levels. Inflammation, scarring, and symptoms progress faster in accelerated silicosis than in simple silicosis. Progressive massive fibrosis may occur in simple or accelerated silicosis, but is more common in the accelerated form. Progressive massive fibrosis results from severe scarring and leads to the destruction of normal lung structures. Some studies show that exposure to respirable crystalline silica (without silicosis) or that the disease silicosis may be associated with the increased incidence of several autoimmune disorders such as scleroderma (thickening of the skin), systemic lupus erythematosus, rheumatoid arthritis and diseases affecting the kidneys. Silicosis increases the risk of tuberculosis. Some studies show an increased incidence of chronic kidney disease and end-stage renal disease in workers exposed to respirable crystalline silica. Corrosive to the respiratory tract. Symptoms/Injuries After Skin Contact: Cement may cause dry skin, discomfort, irritation, severe burns, and dermatitis. Exposure of sufficient duration to wet cement, or to dry cement on moist areas of the body, can cause serious, potentially irreversible damage to skin, eye, respiratory and digestive tracts due to chemical (caustic) burns, including third degree burns. A skin exposure may be hazardous even if there is no pain or discomfort. Cement is capable of causing dermatitis by irritation and allergy. Skin affected by dermatitis may include symptoms such as, redness, itching, rash, scaling, and cracking. Irritant dermatitis is caused by the physical properties of cement including alkalinity and abrasion. Allergic contact dermatitis is caused by sensitization to hexavalent chromium
Acute Toxicity: Not classified
Lafarge Portland Cement (cement) Safety Data Sheet according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
04/23/2015 EN (English US) 9/11
(chromate) present in cement. The reaction can range from a mild rash to severe skin ulcers. Persons already sensitized may react to the first contact with cement. Others may develop allergic dermatitis after years of repeated contact with cement. Symptoms/Injuries After Eye Contact: Airborne dust may cause immediate or delayed irritation or inflammation. Eye contact with large amounts of dry powder or with wet cement can cause moderate eye irritation, chemical burns and blindness. Eye exposures require immediate first aid and medical attention to prevent significant damage to the eye. Symptoms/Injuries After Ingestion: May cause burns or irritation of the linings of the mouth, throat, and gastrointestinal tract. Chronic Symptoms: If dust is generated, repeated exposure through inhalation may cause cancer or lung disease.
Information on Toxicological Effects - Ingredient(s) LD50 and LC50 Data:
Calcium oxide (1305-78-8)
ATE CLP (oral) 500.000 mg/kg
Quartz (14808-60-7)
LD50 Oral Rat > 5000 mg/kg
Quartz (14808-60-7)
IARC Group 1
National Toxicity Program (NTP) Status Known Human Carcinogens.
SECTION 12: ECOLOGICAL INFORMATION Toxicity Not classified
Calcium oxide (1305-78-8)
LC50 Fish 1 1070 mg/l (Exposure time: 96 h - Species: Cyprinus carpio [static])
Persistence and Degradability Not available
Bioaccumulative Potential Calcium oxide (1305-78-8)
BCF fish 1 (no bioaccumulation)
Mobility in Soil Not available
Other Adverse Effects Not available
SECTION 13: DISPOSAL CONSIDERATIONS Waste Disposal Recommendations: Dispose of waste material in accordance with all local, regional, state, national, provincial, territorial and international regulations. Additional Information: If discarded in its purchased form, this product would not be a hazardous waste either by listing or characteristic. However, under RCRA, it is the responsibility of the product user to determine at the time of disposal, whether a material containing the product or derived from the product should be classified as a hazardous waste.
SECTION 14: TRANSPORT INFORMATION 14.1 In Accordance with DOT Not regulated for transport
14.2 In Accordance with IMDG Not regulated for transport
14.3 In Accordance with IATA Not regulated for transport
14.4 In Accordance with TDG Not regulated for transport
SECTION 15: REGULATORY INFORMATION US Federal Regulations
Limestone (1317-65-3)
Listed on the United States TSCA (Toxic Substances Control Act) inventory
Cement, portland, chemicals (65997-15-1)
Listed on the United States TSCA (Toxic Substances Control Act) inventory
Calcium oxide (1305-78-8)
Listed on the United States TSCA (Toxic Substances Control Act) inventory
Lafarge Portland Cement (cement)
SARA Section 311/312 Hazard Classes Immediate (acute) health hazard Delayed (chronic) health hazard
Lafarge Portland Cement (cement) Safety Data Sheet according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
04/23/2015 EN (English US) 10/11
Magnesium oxide (MgO) (1309-48-4)
Listed on the United States TSCA (Toxic Substances Control Act) inventory
Quartz (14808-60-7)
Listed on the United States TSCA (Toxic Substances Control Act) inventory
US State Regulations
Quartz (14808-60-7)
U.S. - California - Proposition 65 - Carcinogens List WARNING: This product contains chemicals known to the State of California to cause cancer.
Limestone (1317-65-3)
RTK - U.S. - Massachusetts - Right To Know List RTK - U.S. - New Jersey - Right to Know Hazardous Substance List RTK - U.S. - Pennsylvania - RTK (Right to Know) List
Cement, portland, chemicals (65997-15-1)
RTK - U.S. - Massachusetts - Right To Know List RTK - U.S. - New Jersey - Right to Know Hazardous Substance List RTK - U.S. - Pennsylvania - RTK (Right to Know) List
Gypsum (Ca(SO4).2H2O) (13397-24-5)
RTK - U.S. - New Jersey - Right to Know Hazardous Substance List RTK - U.S. - Pennsylvania - RTK (Right to Know) List
Calcium oxide (1305-78-8)
RTK - U.S. - Massachusetts - Right To Know List RTK - U.S. - New Jersey - Right to Know Hazardous Substance List RTK - U.S. - Pennsylvania - RTK (Right to Know) List
Magnesium oxide (MgO) (1309-48-4)
RTK - U.S. - Massachusetts - Right To Know List RTK - U.S. - New Jersey - Right to Know Hazardous Substance List RTK - U.S. - Pennsylvania - RTK (Right to Know) List
Quartz (14808-60-7)
RTK - U.S. - Massachusetts - Right To Know List RTK - U.S. - New Jersey - Right to Know Hazardous Substance List RTK - U.S. - Pennsylvania - RTK (Right to Know) List
Canadian Regulations
Limestone (1317-65-3)
Listed on Non-Domestic Substances List (NDSL)
WHMIS Classification Class D Division 2 Subdivision A - Very toxic material causing other toxic effects
Cement, portland, chemicals (65997-15-1)
Listed on the Canadian DSL (Domestic Substances List) inventory. Listed on the Canadian Ingredient Disclosure List
WHMIS Classification Class E - Corrosive Material
Calcium oxide (1305-78-8)
Listed on the Canadian DSL (Domestic Substances List) inventory. Listed on the Canadian Ingredient Disclosure List
WHMIS Classification Class E - Corrosive Material
Lafarge Portland Cement (cement)
WHMIS Classification Class D Division 2 Subdivision A - Very toxic material causing other toxic effects Class E - Corrosive Material
Lafarge Portland Cement (cement) Safety Data Sheet according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
04/23/2015 EN (English US) 11/11
Magnesium oxide (MgO) (1309-48-4)
Listed on the Canadian DSL (Domestic Substances List) inventory. Listed on the Canadian Ingredient Disclosure List
WHMIS Classification Uncontrolled product according to WHMIS classification criteria
Quartz (14808-60-7)
Listed on the Canadian DSL (Domestic Substances List) inventory. Listed on the Canadian Ingredient Disclosure List
WHMIS Classification Class D Division 2 Subdivision A - Very toxic material causing other toxic effects
This product has been classified in accordance with the hazard criteria of the Controlled Products Regulations (CPR) and the SDS contains all of the information required by CPR.
SECTION 16: OTHER INFORMATION, INCLUDING DATE OF PREPARATION OR LAST REVISION
Revision date : 04/23/2015 Other Information : This document has been prepared in accordance with the SDS requirements of the OSHA
Hazard Communication Standard 29 CFR 1910.1200. GHS Full Text Phrases:
------ Carc. 1A Carcinogenicity Category 1A
------ Eye Dam. 1 Serious eye damage/eye irritation Category 1
------ Skin Corr. 1C Skin corrosion/irritation Category 1C
------ Skin Irrit. 2 Skin corrosion/irritation Category 2
------ Skin Sens. 1 Skin sensitization Category 1
------ STOT RE 1 Specific target organ toxicity (repeated exposure) Category 1
------ STOT SE 3 Specific target organ toxicity (single exposure) Category 3
------ H314 Causes severe skin burns and eye damage
------ H315 Causes skin irritation
------ H317 May cause an allergic skin reaction
------ H318 Causes serious eye damage
------ H335 May cause respiratory irritation
------ H350 May cause cancer
------ H372 Causes damage to organs through prolonged or repeated exposure
Party Responsible for the Preparation of This Document Lafarge North America Inc. +1 773-372-1000 (9am to 5pm CST) An electronic version of this SDS is available at: www.lafarge-na.com under the Sustainability and Products sections. Please direct any inquiries regarding the content of this SDS to [email protected]. Lafarge North America Inc. (LNA) believes the information contained herein is accurate; however, LNA makes no guarantees with respect to such accuracy and assumes no liability in connection with the use of the information contained herein which is not intended to be and should not be construed as legal advice or as insuring compliance with any federal, state or local laws or regulations. Any party using this product should review all such laws, rules, or regulations prior to use, including but not limited to US and Canada Federal, Provincial and State regulations. NO WARRANTY IS MADE, EXPRESS OR IMPLIED, OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR OTHERWISE. North America GHS US 2012 & WHMIS
SAFETY DATA SHEET
HYDROCHLORIC ACID 15%
Page: 1
Compilation date: 22/02/2012
Revision date: 12/05/2015
Revision No: 4
Section 1: Identification of the substance/mixture and of the company/undertaking
1.1. Product identifier
Product name: HYDROCHLORIC ACID 15%
Product code: 15% HCl
1.2. Relevant identified uses of the substance or mixture and uses advised against
Use of substance / mixture: For use in conjunction with Tristel Purogene solution. For professional use only Uses
advised against: Uses other than the intended use of the product
1.3. Details of the supplier of the safety data sheet
Company name: Tristel Solutions Limited
Lynx Business Park
Fordham Road
Newmarket
Cambridgeshire
CB8 7NY
United Kingdom
Tel: +44 (0) 1638 721 500
Fax: +44 (0) 1638 721 911
Email: [email protected]
1.4. Emergency telephone number
Emergency tel: +44 (0) 1638 721 500
(office hours only)
Section 2: Hazards identification
2.1. Classification of the substance or mixture
Classification under CLP: Skin Corr. 1C: H314; STOT SE 3: H335
Classification under CHIP: Xi: R36/37/38
Most important adverse effects: Causes severe skin burns and eye damage. May cause respiratory irritation.
2.2. Label elements
Label elements under CLP:
Hazard statements: H314: Causes severe skin burns and eye damage.
H335: May cause respiratory irritation.
Signal words: Danger
Hazard pictograms: GHS05: Corrosion
GHS07: Exclamation mark
[cont...]
SAFETY DATA SHEET
HYDROCHLORIC ACID 15%
Page: 2
Precautionary statements: P260: Do not breathe mist/vapours/spray.
P280: Wear protective gloves/protective clothing/eye protection.
P303+361+353: IF ON SKIN (or hair): Remove immediately all contaminated clothing.
Rinse skin with water/shower.
P304+340: IF INHALED: Remove victim to fresh air and keep at rest in a position
comfortable for breathing.
P305+351+338: IF IN EYES: Rinse cautiously with water for several minutes. Remove
contact lenses, if present and easy to do. Continue rinsing.
2.3. Other hazards
PBT: This product is not identified as a PBT/vPvB substance.
Section 3: Composition/information on ingredients
3.2. Mixtures
Hazardous ingredients:
HYDROCHLORIC ACID
EINECS CAS CHIP Classification CLP Classification Percent
231-595-7 - - Skin Corr. 1B: H314; STOT SE 3: H335 10-30%
Section 4: First aid measures
4.1. Description of first aid measures
Skin contact: Remove all contaminated clothes and footwear immediately unless stuck to skin. Wash
immediately with plenty of soap and water.
Eye contact: Bathe the eye with running water for 15 minutes. Consult a doctor.
Ingestion: Wash out mouth with water. Consult a doctor.
Inhalation: Remove casualty from exposure ensuring one's own safety whilst doing so. Consult a
doctor.
4.2. Most important symptoms and effects, both acute and delayed
Skin contact: There may be irritation and redness at the site of contact.
Eye contact: There may be irritation and redness. The eyes may water profusely.
Ingestion: There may be soreness and redness of the mouth and throat.
Inhalation: There may be irritation of the throat with a feeling of tightness in the chest. Exposure may
cause coughing or wheezing.
Delayed / immediate effects: Immediate effects can be expected after short-term exposure.
[cont...]
SAFETY DATA SHEET
HYDROCHLORIC ACID 15%
Page: 3
4.3. Indication of any immediate medical attention and special treatment needed
Immediate / special treatment: Eye bathing equipment should be available on the premises.
Section 5: Fire-fighting measures
5.1. Extinguishing media
Extinguishing media: Suitable extinguishing media for the surrounding fire should be used. Use water spray
to cool containers.
5.2. Special hazards arising from the substance or mixture
Exposure hazards: In combustion emits toxic fumes.
5.3. Advice for fire-fighters
Advice for fire-fighters: Wear self-contained breathing apparatus. Wear protective clothing to prevent contact
with skin and eyes.
Section 6: Accidental release measures
6.1. Personal precautions, protective equipment and emergency procedures
Personal precautions: Refer to section 8 of SDS for personal protection details. If outside do not approach from
downwind. If outside keep bystanders upwind and away from danger point. Mark out the
contaminated area with signs and prevent access to unauthorised personnel. Turn
leaking containers leak-side up to prevent the escape of liquid.
6.2. Environmental precautions
Environmental precautions: Do not discharge into drains or rivers. Contain the spillage using bunding.
6.3. Methods and material for containment and cleaning up
Clean-up procedures: Absorb into dry earth or sand. Transfer to a closable, labelled salvage container for
disposal by an appropriate method.
6.4. Reference to other sections
Reference to other sections: Refer to section 8 of SDS. Refer to section 13 of SDS.
Section 7: Handling and storage
7.1. Precautions for safe handling
Handling requirements: Avoid direct contact with the substance. Ensure there is sufficient ventilation of the area.
Do not handle in a confined space. Avoid the formation or spread of mists in the air.
7.2. Conditions for safe storage, including any incompatibilities
Storage conditions: Store in cool, well ventilated area. Keep container tightly closed.
7.3. Specific end use(s)
Specific end use(s): To be used with Purogene. For professional use only.
[cont...]
SAFETY DATA SHEET
HYDROCHLORIC ACID 15%
Page: 4
Section 8: Exposure controls/personal protection
8.1. Control parameters
Hazardous ingredients:
HYDROCHLORIC ACID...100%
Respirable dustWorkplace exposure limits:
State 8 hour TWA 15 min. STEL 8 hour TWA 15 min. STEL
UK 8 mg/m3 8 mg/m3 - -
DNEL/PNEC Values
DNEL / PNEC No data available.
8.2. Exposure controls
Engineering measures: Ensure there is sufficient ventilation of the area.
Respiratory protection: Self-contained breathing apparatus must be available in case of emergency.
Hand protection: Protective gloves.
Eye protection: Safety glasses. Ensure eye bath is to hand.
Skin protection: Protective clothing.
Section 9: Physical and chemical properties
9.1. Information on basic physical and chemical properties
State: Liquid
Colour: Colourless
Evaporation rate: No data available.
Oxidising: No data available.
Solubility in water: No data available.
Viscosity: No data available.
Boiling point/range°C: No data available. Melting point/range°C: No data available.
Flammability limits %: lower: No data available. upper: No data available.
Flash point°C: No data available. Part.coeff. n-octanol/water: No data available.
Autoflammability°C: No data available. Vapour pressure: No data available.
Relative density: No data available. pH: <1
VOC g/l: No data available.
9.2. Other information
Other information: No data available.
Section 10: Stability and reactivity
10.1. Reactivity
Reactivity: Stable under recommended transport or storage conditions.
[cont...]
SAFETY DATA SHEET
HYDROCHLORIC ACID 15%
Page: 5
10.2. Chemical stability
Chemical stability: Stable under normal conditions.
10.3. Possibility of hazardous reactions
Hazardous reactions: Hazardous reactions will not occur under normal transport or storage conditions.
Decomposition may occur on exposure to conditions or materials listed below.
10.4. Conditions to avoid
Conditions to avoid: Heat.
10.5. Incompatible materials
Materials to avoid: Strong bases. Strong oxidising agents.
10.6. Hazardous decomposition products
Haz. decomp. products: In combustion emits toxic fumes.
Section 11: Toxicological information
11.1. Information on toxicological effects
Relevant effects for mixture:
Effect Route Basis
Irritation OPT INH DRM Hazardous: calculated
Symptoms / routes of exposure
Skin contact: There may be irritation and redness at the site of contact.
Eye contact: There may be irritation and redness. The eyes may water profusely.
Ingestion: There may be soreness and redness of the mouth and throat.
Inhalation: There may be irritation of the throat with a feeling of tightness in the chest. Exposure may
cause coughing or wheezing.
Delayed / immediate effects: Immediate effects can be expected after short-term exposure.
Section 12: Ecological information
12.1. Toxicity
Ecotoxicity values: No data available.
12.2. Persistence and degradability
Persistence and degradability: Biodegradable.
12.3. Bioaccumulative potential
Bioaccumulative potential: No bioaccumulation potential.
12.4. Mobility in soil
Mobility: Readily absorbed into soil. Not classified as environmentally hazardous.
[cont...]
SAFETY DATA SHEET
HYDROCHLORIC ACID 15%
Page: 6
12.5. Results of PBT and vPvB assessment
PBT identification: This product is not identified as a PBT/vPvB substance.
12.6. Other adverse effects
Other adverse effects: Negligible ecotoxicity.
Section 13: Disposal considerations
13.1. Waste treatment methods
Disposal operations: Transfer to a suitable container and arrange for collection by specialised disposal
company.
NB: The user's attention is drawn to the possible existence of regional or national
regulations regarding disposal.
Section 14: Transport information
14.1. UN number
UN number: UN1789
14.2. UN proper shipping name
Shipping name: HYDROCHLORIC ACID
14.3. Transport hazard class(es)
Transport class: 8
14.4. Packing group
Packing group: III
14.5. Environmental hazards
Environmentally hazardous: No Marine pollutant: No
14.6. Special precautions for user
Special precautions: No special precautions.
Tunnel code: E
Transport category: 3
IMDG seg. group: NOT APPLICABLE
14.7. Transport in bulk according to Annex II of MARPOL73/78 and the IBC Code
Transport in bulk: Not applicable
Section 15: Regulatory information
15.1. Safety, health and environmental regulations/legislation specific for the substance or mixture
Specific regulations: This product has been classified in accordance with CLP and CHIP regulations and
compiled in accordance with Annex II of REACH.
[cont...]
SAFETY DATA SHEET
HYDROCHLORIC ACID 15%
Page: 7
15.2. Chemical Safety Assessment
Chemical safety assessment: A chemical safety assessment has not been carried out for the substance or the mixture
by the supplier.
Section 16: Other information
Other information
Other information: This safety data sheet is prepared in accordance with Commission Regulation (EU) No
453/2010.
* indicates text in the SDS which has changed since the last revision.
Phrases used in s.2 and s.3: H314: Causes severe skin burns and eye damage.
H335: May cause respiratory irritation.
R36/37/38: Irritating to eyes, respiratory system and skin.
Legend to abbreviations: PNEC = predicted no effect level
DNEL = derived no effect level
LD50 = median lethal dose
LC50 = median lethal concentration
EC50 = median effective concentration
IC50 = median inhibitory concentration
dw = dry weight
bw = body weight
cc = closed cup
oc = open cup
MUS = mouse
GPG = guinea pig
RBT = rabbit
HAM = hamster
HMN = human
MAM = mammal
PGN = pigeon
IVN = intravenous
SCU = subcutaneous
SKN = skin
DRM = dermal
OCC = ocular/corneal
PCP = phycico-chemical properties
Legal disclaimer: The above information is believed to be correct but does not purport to be all inclusive
and shall be used only as a guide. This company shall not be held liable for any
damage resulting from handling or from contact with the above product.
[final page]
SAFETY DATA SHEET Soda Ash - Sodium Carbonate
SDS #: 497-19-8
Revision date: 2018-08-28
Format: NA
Version 5.07
1. PRODUCT AND COMPANY IDENTIFICATION
Product Identifier
Product Name
Other means of Identification
Synonyms
Chemical Family
Soda Ash
Sodium carbonate, anhydrous; Carbonic acid, disodium salt; Disodium carbonate
Alkali salt
Recommended use of the chemical and restrictions on use
Recommended Use:
Restrictions on Use:
Supplier Address
Emergency telephone number
800-255-3924 ChemTel.
(United States)
+ 1 01 813-248-0585
(Outside the United States)
Glass manufacture, Personal care, Detergent. Water treatment chemical. Chemical processing
See section 16 for more information
PRO Chemical & Dye
126 Shove Street
Fall River, MA 02724
2. HAZARDS IDENTIFICATION
Classification
OSHA Regulatory Status
This material is considered hazardous by the OSHA Hazard Communication Standard (29 CFR 1910.1200)
Page 1/7
Soda Ash SDS #: 497-19-8 Revision date: 2018-08-28 Version 5.07
Serious eye damage/eye irritation
GHS Label elements, including precautionary statements
EMERGENCY OVERVIEW
Warning
Hazard Statements
H319 - Causes serious eye irritation
Precautionary Statements - Prevention
P264 - Wash face, hands and any exposed skin thoroughly after handling
P280 - Wear protective gloves/protective clothing/eye protection/face protection
Precautionary Statements· Response
Category 2
P305 + P351 + P338 - IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to
do. Continue rinsing
P337 + P313 - If eye irritation persists: Get medical advice/ attention
Hazards not otherwise classified (HNOC)
No hazards not otherwise classified were identified.
Other Information
May be harmful if swallowed,
Prolonged or repeated contact may dry skin and cause irritation
3. COMPOSITION/INFORMATION ON INGREDIENTS Chemical Family Formula
Chemical name
Sodium carbonate
Synonyms are provided in Section 1.
Alkali salt.
Na2C03
CAS-No
497-19-8
Weight%
100
4. FIRST AID MEASURES
Eye Contact
Skin Contact
Inhalation
Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. If
symptoms persist, call a physician.
Wash off with warm water and soap. Get medical attention if irritation develops and
persists. Remove and wash contaminated clothing before re-use.
Remove person to fresh air. If signs/symptoms continue, get medical attention.
Page 2/7
Soda Ash
Ingestion
Most important symptoms and
effects, both acute and delayed
Indication of immediate medical attention and special treatment needed, if necessary
SDS#: 497-19-8 Revision date: 2018-08-28 Version 5.07
Never give anything by mouth to an unconscious person Get medical attention if symptoms
occur
Causes serious eye damage I eye irritation.
Treat symptomatically.
5. FIRE-FIGHTING MEASURES
Suitable Extinguishing Media
Specific Hazards Arising from the Chemical
Hazardous Combustion Products
Explosion data Sensitivity to Mechanical Impact Sensitivity to Static Discharge
Protective equipment and
precautions for firefighters
Use extinguishing agent suitable for type of surrounding fire.
Non-combustible, substance itself does not bum but may decompose upon heating to
produce corrosive and/or toxic fumes
Fumes of sodium oxide. Carbon oxides (COx).
Not sensitive.
Not sensitive.
As in any fire, wear self-contained breathing apparatus pressure-demand, MSHAINIOSH
(approved or equivalent) and full protective gear.
6. ACCIDENTAL RELEASE MEASURES
Personal Precautions
Other
Environmental Precautions
Methods for Containment
Methods for cleaning up
Avoid dust formation. Sweep up to prevent slipping hazard.
For further clean-up instructions, call Emergency Hotline number listed in Section 1
"Product and Company Identification" above.
Do not flush into surface water or sanitary sewer system.
Prevent large quantities of this product from contacting vegetation or waterways. Cover with
plastic sheet to prevent spreading. Pick up and transfer to properly labeled containers. Keep in suitable and closed containers for disposal.
Pick up and transfer to properly labeled containers. Keep in suitable and closed containers
for disposal. Dispose of waste as indicated in Section 13.
7. HANDLING AND STORAGE
Handling
Storage
; -.7 .'
Use air conveying/mechanical systems for bulk transfer to storage. Provide appropriate
exhaust ventilation at places where dust is formed. In case of insufficient ventilation, wear
suitable respiratory equipment if release of airborne dust is expected. Make sure the
locations of the eye washers and safety showers are close to the workstation locations.
Store in original container. Keep in properly labeled containers. Keep container tightly
closed.
Incompatible products
Control parameters
Aluminum. Powdered aluminum. Acids
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
This product, as supplied, does not contain any hazardous materials with occupational exposure limits established by the region
specific regulatory bodies Local nuisance dust standards apply
Page 3/7
Soda Ash
Appropriate engineering controls
Engineering measures
SDS#: 497-19-8 Revision date: 2018-08-28 Version 5.07
Where reasonably practicable this should be achieved by the use of local exhaust
ventilation and good general extraction.
Individual protection measures, such as personal protective equipment
Eye/Face Protection
Skin and Body Protection
Hand Protection
Respiratory Protection
Hygiene measures
General information
Tightly fitting safety goggles.
Wear suitable protective clothing. Protective shoes or boots.
Nitrile rubber, Neoprene gloves
In case of inadequate ventilation wear respiratory protection.
Handle in accordance with good industrial hygiene and safety practice. Make sure the
locations of the eye washers and safety showers are close to the workstation locations.
These recommendations apply to the product as supplied
9. PHYSICAL AND CHEMICAL PROPERTIES Information on basic physical and chemical properties Appearance Physical State Color Odor Odor threshold pH Melting point/freezing point Boiling Point/Range Flash point
Evaporation Rate Flammability (solid, gas)
Flammability Limit in Air
Upper flammability limit:
Lower flammability limit:
Vapor pressure Vapor density DensIty Specific gravity Water solubility Solubility in other solvents Partition coefficient Auto-ignition temperature Decomposition temperature Viscosity, kinematic Viscosity, dynamic Explosive properties Oxidizing properties Molecular weight Bulk density Kst
Reactivity
Granules
Solid
White
odorless
Not applicable
11.4 (1% solution in water)
851 ·c No information available
Not applicable
No information available
Non-combustible, substance itself does not burn but may decompose upon heating to
produce corrosive and/or toxic fumes
No information available
No information available
No information available
No information available
No information available
2.52
212.5 g/L @ 20°C
No information available
No information available
No information available
400°C No information available
No information available
Not explosive
Non-oxidizing
105.99
0.86 - 1.12 g/cm3 (Dense grades) 0.70 - 0.90 g/cm3 (Light Grades)
o bar m/s
10. STABILITY AND REACTIVITY
None under normal use conditions.
Page 4/7
Soda Ash
Chemical Stability
Stable. Decomposes by reaction with strong acid.
SDS#: 497-19-8
Revision date: 2018-08-28
Version 5.07
Possibility of Hazardous Reactions None under normal processing.
Hazardous polymerization
Conditions to avoid
Incompatible materials
Hazardous polymerization does not occur.
Exposure to air or moisture over prolonged periods.
Aluminum. Powdered aluminum. Acids.
Hazardous Decomposition Products Sodium oxides. Carbon oxides (COx).
11. TOXICOLOGICAL INFORMATION
Product Information
LD50 Oral L050 Dermal LC50 Inhalation
Eye Contact Skin Contact Sensitization
Information on toxicological effects
Symptoms
2,800 mg/kg (rat)
> 2,000 mg/kg (rabbit)
Irritating to eyes.
Non-irritating
Patch test on human volunteers did not demonstrate sensitization properties.
No information available.
Delayed and immediate effects as well as chronic effects from short and long-term exposure Chronic toxicity Mutagenicity Carcinogenicity Reproductive toxicity STOT - single exposure STOT - repeated exposure Aspiration hazard
Ecotoxicity
No known effect.
No information available
Not recognized as carcinogenic by Research Agencies (IARC, NTP, OSHA, ACGIH).
No information available.
No information available.
No information available. No information available.
12. ECOLOGICAL INFORMATION
Sodium carbonate (497-19-8)
Active Ingredient(s) Duration Species Value Units
Sodium Carbonate 196 h LC50 Bluegill sunfish 1300 mg/l
Sodium Carbonate 148 h EC50 Ceriodaphnia 1200-227 mg/l
Persistence and degradability
Bioaccumulation
Mobility
Other Adverse Effects
Biodegradability does not pertain to inorganic substances.
Does not bio-accumulate.
Dissociates into ions.
None known.
13. DISPOSAL CONSIDERATIONS
Page 5/7
Soda Ash
Waste disposal methods
Contaminated Packaging
SDS #: 497-19-8
Revision date: 2018-08-28
Version 5.07
This material, as supplied, is not a hazardous waste according to Federal regulations (40
CFR 261). Dispose of in accordance with local regulations.
Dispose of in accordance with local regulations.
14. TRANSPORTATION INFORMATION
DOT NOT REGULATED
TDG
ICAO/IATA
IMDG/IMO
NOT REGULATED
NOT REGULATED
NOT REGULATED
U.S. Federal Regulations
SARA 313
Section 313 of Title III of the Superfund Amendments and Reauthorization Act of 1986 (SARA). This product does not contain
any chemicals which are subject to the reporting requirements of the Act and Title 40 of the Code of Federal Regulations, Part 372
SARA 311/312 Hazard Categories
Acute health hazard
Chronic health hazard
Fire hazard
Sudden release of pressure hazard
Reactive Hazard
Yes
No
No
No
No
Clean Water Act
This product does not contain any Substances regulated as pollutants pursuant to the Clean Water Act (40 CFR 122.21 and 40
CFR 122.42)
CERClA
This material, as supplied, does not contain any substances regulated as hazardous substances under the Comprehensive
Environmental Response Compensation and Liability Act (CERCLA) (40 CFR 302) or the Superfund Amendments and
Reauthorization Act (SARA) (40 CFR 355). There may be specific reporting requirements at the local, regional, or state level
pertaining to releases of this material
US State Regulations
California Proposition 65
WARNING: This product can expose you to chemicals including lead, which are known to the State of California to cause
cancer and birth defects or other reproductive harm. For more information go to www,P65Warnings.ca.gov
U.S. State Right-to~Know Regulations
This product Is not listed on state right-to-know regulations
International Inventories
Component TSCA DSl EINECS/ELI ENCS China KECl PfCCS AICS
(United (Canada)
NCS (Japan) (IECSC)
(Korea) (Philippines) (Australia)
States) (Europe)
Sodium carbonate X X X X X X X X 497-19-8 ( 100)
Mexico - Grade
Moderate risk, Grade 2
16. OTHER INFORMATION NFPA
Health Hazards 2
Flammability 0
Page 6/7
Instability 0
Special Hazards -
Soda Ash
HMIS Health Hazards 2 Flammability0 Physical hazard 0 NFPA/HMIS Ratings Legend Severe= 4; Serious= 3; Moderate= 2; Slight - 1; Minimal = 0
Product Certifications
SDS #: 497-19-8 Revision date: 2018-08-28 Version 5.07
Personal Protection X
This product is certified to NSF/ANSI Standard 60 for use in drinking water treatment at the specified maximum use limit. The MUL
(maximum use level) for sodium carbonate, anhydrous is 150 mg/L under NSF/ANSI Standard 60.
@
Cer1ifiC<!to i NSFJANSI60 !
Halal: IFANCA
Revision date: Revision note
2018-08-28 Updated for Prop 65
American Water Works Association
Disclaimer This company believes that the information and recommendations contained herein (including data and statements) are accurate as of the date hereof. NO WARRANTY OF FITNESS FOR ANY PARTICULAR PURPOSE, WARRANTY OF MERCHANTABILITY OR ANY OTHER WARRANTY, EXPRESSED OR IMPLIED, IS MADE CONCERNING THE INFORMATION PROVIDED HEREIN. The Information provided herein relates only to the specified product designated and may not be applicable where such product is used in combination with any other materials or in any process. Further, since the conditions and methods of use are beyond the control of this company, this company expressly disclaims any and all liability as to any results obtained or arising from any use of the products or reliance on such information.
. End of Safety Data Sheet
Page 7/7