parade - alumasc water management solutions · gatic parade floor access covers provide easy access...
TRANSCRIPT
-
Stainless Steel and Aluminium Access Covers and Frames
Technical Details
Parade
Uniclass July 2014L217241
CI/SfB (52.9)
-
2 Gatic Parade Tel: +44 (0)1304 203545 Website: www.gatic.com/parade Email: [email protected]
TextFeatures and benefits
MaterialsThe majority of the Gatic Parade range of floor access covers for hard floor finishes can bemanufactured in either aluminium or stainless steel, giving you the freedom to choose thematerial most suitable to your particular project.
ConfigurationTo ensure total versatility our floor access covers can be used singly, in continuous runs as ductcovers or over large areas as a multispan cover.
SizesGatic Parade floor access covers are custom made to your exact specification, between statedmaximum and minimum sizes. Custom made products can be manufactured without incurring a time or cost surcharge - All products are manufactured to tolerances in accordance with BS EN 22768-1:1993 – ISO 2768-1: 1989 – Class C.
QualityEvery aspect of Gatic Parade floor access covers has been designed and manufactured with quality in mind:
n Covers are precision made to avoid distortion.
n Lifting blocks are anchored to the inner frame.
n Stainless steel securing bolts are stiletto heel proof.
n Top edge seal on aluminium covers helps prevent dirt, grout or grinding waste ingress.
n Base plates and reinforcement are galvanised steel to resist corrosion, contact our Technical Department if products are to be used in a corrosive environment such as swimming pools.
FittingQuick and easy to install ensuring minimum disruption, full installation instructions provided.Access to network of skilled installation experts is available if required.
-
Gatic Parade Tel: +44 (0)1304 203545 Website: www.gatic.com/parade Email: [email protected] 3
Gatic Parade floor access covers provide easy access to under floor services using lifting keys to remove the cover. Cover sections are tapered for easy removal and frame sections give a good key to bedding mortar.
Load bearing capacitiesVarious load bearing capacities, from light duty or pedestrian to a heavy duty pneumatic wheelloading, up to 5 tonne, ensure the suitability of the Gatic Parade range of access covers whatever the location.
Fire ratingsFire ratings up to three hours are available on most floor access covers.
WeightThe weight of the access cover should be taken into account where ease of handling is animportant consideration. In all cases reference should be made to the Manual HandlingOperations Regulations 1992, which implement European Directive 90/269/EEC. If loads areexcessive, consideration should be given to the use of hydraulic lifters, or our AUH/ALIFT or SSH/ALIFT range.
AUH/ALIFT and SSH/ALIFT are gas spring assisted hinged access covers designed specifically for situations where either frequent access is required or ease of handling is critical.
Optional extrasIn order to give users exactly the floor access cover you require a number of optional extras areavailable:
n Double Seals on the AUL, SSL, AUM, SSM, SSH, AUH/ALIFT and SSH/ALIFT to provide the highest levels of hygiene and security.
n Brass, stainless steel or coloured high impact pvc show edges on aluminium ensure aesthetic choice.
-
4 Gatic Parade Tel: +44 (0)1304 203545 Website: www.gatic.com/parade Email: [email protected]
TextGatic Parade – Technical Details Introduction
GATIC PARADE is a comprehensive range of single, duct and multispan high quality Aluminium and Stainless Steel Access Covers. The Gatic Parade range can be used in any situation where ease of access to services and a high quality floor finish is required.
Cover infillCovers are designed to accept various infill to match the surrounding surface. When grinding of the surface is required to polish marble or terrazzo, up to 2mm can be removed from the top of the aluminium or brass cover and frame, without detriment to the unit.
MaterialAluminium Covers are produced from Aluminium Alloy grade 6063 which is noted for its high resistance to corrosion and impact.
GATIC ALUMINIUM PARADE Covers can have either Aluminium (Type AUL, Type AUM or Type AUH/ALIFT), or a brass edge showing on the surface (Type AUL/B – AUM/B).
Gatic Parade Stainless Steel Covers are to grade 304 or 316 (Type SSL – SSM – SSH/PS – SSH/ALIFT).
SealingAll standard covers are fitted with double seals to prevent the ingress of dirt and water into the pit.
Base plateAll covers are fitted with a solid Galvanised Steel Base Plate and reinforcing to assist installation at site.
Locking boltsDouble Sealed Covers are fitted with socket head locking bolts. Unsealed covers are fitted with blanking bolts.
KeysStandard lifting keyholes utilise a threaded key for security during cover removal.
InstallationEach consignment of goods is accompanied by written installation instructions.
InterchangeabilityStandard sized covers are normally interchangeable.
-
Gatic Parade Tel: +44 (0)1304 203545 Website: www.gatic.com/parade Email: [email protected] 5
Load classificationCovers are designed to withstand the working loads as shown in the following chart when correctly installed. Where stated, wheel loadings apply to slow moving vehicles with pneumatic tyres.
Light Duty: Pedestrian traffic, (including wheeled trollies, sack trucks, etc).Type AUL and Type SSL.
Medium Light Duty: Up to 3 tonne slow moving pneumatic tyre wheel load, (cars and light delivery vehicles).Type AUM and Type SSM.
Medium Duty: Up to 5 tonne slow moving pneumatic tyre wheel load, (including cars and light delivery vehicles).Type SSH/PS – For external paving slabs including granite & concrete.Type AUH/ALIFT – Aluminium AssistLift Covers for ceramic tiles, marble, terrazzo, resin, wood and all hard floors.Type SSH/ALIFT – Stainless Steel AssistLift Covers for ceramic tiles, marble, terrazzo, resin, wood and all hard floors. Fire ratingsThe following Fire Ratings have been tested in accordance with BS 476: Part 20: 1987
COVER WEIGHTS WHEN FILLED WITH CONCRETE (APPROX)
Cover Type Single Duct Multispan
Type AUL & SSL 1 Hour • •
Type AUM & SSM 3 Hours 2 Hours 2 Hours
Type SSH/PS 3 Hours 2 Hours 2 Hours
AUH/ALIFT & SSH/ALIFT 3 Hours • •
Cover Type Cover Weight
AUL & SSL 90 kg/m2
AUM & SSM 155 kg/m2
SSH/PS 220 kg/m2
Cover Type Cover Operating Wt.
AUH/ALIFT & SSH/ALIFT 20 kg
-
6 Gatic Parade Tel: +44 (0)1304 203545 Website: www.gatic.com/parade Email: [email protected]
Single Covers & Frames – Type AUL / AUL/B and SSL
Loading
Light Duty pedestrian traffic (Including small wheeled trollies, sack trucks, etc.)Typical floor finishCeramic tiles, marble, terrazzo, concrete resin, wood, and all hard floors.
Optionsn Aluminium (Type AUL) n Aluminium with Brass edge (AUL/B) n Stainless Steel (Type SSL)
*delete as appropriate
Standard Sizes AvailableSizes shown are typical pit clear opening sizes. Covers can be manufactured to suit virtually any size up to 750 x 750 for this loading Group.
Specification…… in No. ………. X………… single recessed cover and frame, Type AUL or AUL/B or SSL*, with 1 hour fire rating to BS476: Part 20: 1987*, Aluminium – Stainless Steel* with galvanised baseplate and reinforcement, double sealed with securing bolts – unsealed with blanking bolts*
floor finish (eg. ceramic tiles)
structural concrete frame anchor lug aluminium frame carrier
reinforcement
double sealsouter frame
secured to timber
timber supportfor outer frame
secured to floor joist
stainless steel socket
floor board
floor joist
frame width: 61.5 mm3.5 mm nominalframe width: 61.5 mm75mm
recommended rebate: 200 mm
reco
mm
ende
d re
bate
: 60
mm
fram
e de
pth:
50
mm
stainless steelshow edge
stainless steel cover frame
socketheadsecuring bolt
stainless steel corner plate
hardwood flooring
�oor �nish(eg. ceramic tiles)
aluminiumshow edge
top edge seal
structural concrete in�ll reinforcement
overall frame size
double seals
frame width: 56 mm4 nominal 4 nominal
clear opening frame width: 56 mm
recommended rebate: 90 mm
timber support forouter frame secured
to �oor joist
reco
mm
ende
d re
bate
: 60
mm
fram
e de
pth:
50
mm
socket head securing bolt
ply in�ll
blanking bolt used on non-sealed covers decorative
edge
hardwood �ooring
�oor board
�oor joist
steelbase plate
Type AUL
Type SSL
Type AUL
Type SSL
Pit Clear OpeningLength x Span
150 x 150300 x 300450 x 300600 x 300750 x 300450 x 450600 x 450750 x 450 600 x 600750 x 600750 x 750
-
Gatic Parade Tel: +44 (0)1304 203545 Website: www.gatic.com/parade Email: [email protected] 7
TextDuct & Trench Covers & Frames – Type AUL / AUL/B and SSL
Loading
Light Duty pedestrian traffic (Including small wheeled trollies, sack trucks, etc.)Typical floor finishCeramic tiles, marble, terrazzo, concrete resin, wood, and all hard floors.
Optionsn Aluminium (Type AUL) n Aluminium with Brass edge (AUL/B) n Stainless Steel (Type SSL)
*delete as appropriate
clip-on anchor lug showingalternative positions top edge seal socket head securing bolt
double seals
4 nominal
clear openingrecommended �xing rebate for anchor lug = 165 mm
reco
mm
ende
d re
bate
: 60
mm
fram
e de
pth:
50
mm
frame width: 56 mm
recommended rebate: 90 mm
overall frame size
blanking boltused onnon-sealedcovers
�oor �nish (e.g ceramic tiles)stainless steel
show edgestainless steel cover frame
aluminium frame carrier
socketheadsecuring bolt
stainless steel corner plate
reinforcement
double seals
stainless steel socket
3.5 mm nominalframe width: 61.5
structural concrete
75mm
frame anchor lug
recommended rebate: 200mm
reco
mm
ende
d re
bate
: 60
mm
fram
e de
pth:
50m
m
Type AUL
Type SSL
Type AUL
Type SSL
Standard Sizes AvailableComplex layouts of duct or trench runs can be created – Sizes from 100 to a maximum clear opening span of 600mm for this loading group.
Standard Sizes AvailableRecessed duct covers and frames, Type AUL or AUL/B or SSL*, Aluminium – Stainless Steel* with galvanised baseplate and reinforcement, double sealed with securing bolts – unsealed with blanking bolts* as per drawing.
600 c.o. maximum span
removable support beam 100 c.o. minimum span
any
leng
th
-
8 Gatic Parade Tel: +44 (0)1304 203545 Website: www.gatic.com/parade Email: [email protected]
Pit Clear OpeningLength x Span
150 x 150300 x 300450 x 300600 x 300750 x 300450 x 450600 x 450750 x 450 600 x 600750 x 600750 x 750900 x 750900 x 900
Single Covers & Frames – Type AUM / AUM/B and SSM
Loading
Medium Light Duty Up to 3 tonne slow moving pneumatic tyre wheel loads, (including cars and light delivery vehicles).
Typical floor finishCeramic tiles, marble, terrazzo, concrete, resin, wood, and all hard floors.
Optionsn Aluminium (Type AUM) n Aluminium with Brass edge (AUM/B) n Stainless Steel (Type SSM)
*delete as appropriate
Standard Sizes AvailableSizes shown are typical pit clear opening sizes. Covers can be manufactured to suit virtually any size up to 900 x 900 for this loading group.
Specification…… in No. ………. X………… single recessed cover and frame, Type AUM or AUM/B or SSM*,with 3 hour fire rating to BS476: Part 20: 1987*,Aluminium – Stainless Steel* with galvanised baseplate and reinforcement, double sealed with securing bolts – unsealed with blanking bolts*
hard paving aluminiumshow edge
overall frame size
timber supportfor outer frame
secured to �oor joist
frame width: 56 mm4 mm nominal
clear opening
reco
mm
ende
d re
bate
: 85
mm
fram
e de
pth:
75
mm
4 mm nominal
frame width: 56 mm
recommended rebate: 100 mm
socketheadsecuring bolt
blanking boltused onnon-sealedcovers
hardwood �ooring
�oor board
�oor joist
reco
mm
ende
d re
bate
: 85
mm
fram
e de
pth:
75
mm
oor �nish (e.g ceramic tiles)
reinforcementouter frame secured to timber
double seals
structural concrete
3.5 mmnominal
3.5 mmnominal frame width: 61.5 mm
oor board
oor joist75mm frame width: 61.5 mm
recommended rebate: 200 mm
frame anchor lug
stainless steel sockettimber supportfor outer frame
secured to oor joist
stainless steel outer frame
stainless steel show edge
aluminium frame carrier
socketheadsecuring bolt
stainless steel corner plate
hardwood
ooring
Type AUM
Type SSM
Type AUM
Type SSM
-
Gatic Parade Tel: +44 (0)1304 203545 Website: www.gatic.com/parade Email: [email protected] 9
Duct & Trench Covers & Frames – Type AUM / AUM/B and SSM
Loading
Medium Light Duty Up to 3 tonne slow moving pneumatic tyre wheel loads, (including cars and light delivery vehicles).
Typical floor finishCeramic tiles, marble, terrazzo, concrete, resin, wood, and all hard floors.
Optionsn Aluminium (Type AUM) n Aluminium with Brass edge (AUM/B) n Stainless Steel (Type SSM)
*delete as appropriate
Standard Sizes AvailableComplex layouts of duct or trench runs can be created. Sizes from 100 to a maximum clear opening span of 900mm for this loading group.
SpecificationRecessed duct covers and frames, Type AUM or AUM/B or SSM*, Aluminium – Stainless Steel* with galvanised baseplate and reinforcement, double sealed with securing bolts – unsealed with blanking bolts* as per drawing.
hard paving clip-on anchor lug showingalternative positions
top edge seal steel base platesockethead
securing bolt
overall frame size
blanking boltused onnon-sealedcovers
double seals
4 mm nominal
clear openingframe width: 56 mm
recommended rebate for anchor lug: 175 mm
reco
mm
ende
d re
bate
: 85
mm
fram
e de
pth:
75
mm
stainless steelsocket
�oor �nish (e.g ceramic tiles)
stainless steelouter frame
double seals
reinforcement
stainlesssteel socket
3.5 mm nominal3.5 mm nominalframe width: 61.5 mm
recommended rebate: 200 mm
frame anchor lug
75mm
reco
mm
ende
d re
bate
: 85
mm
fram
e de
pth:
75
mm
structural concrete
stainless steel show edge
aluminiumframe carrier
socketheadsecuring bolt
stainless steel corner plate
Type AUM
Type SSM
Type AUM
Type SSM
-
10 Gatic Parade Tel: +44 (0)1304 203545 Website: www.gatic.com/parade Email: [email protected]
Multispan Covers & Frames – Type AUM / AUM/B and SSM
1300
1450
1600
1750
1900
2000
2150
2300
2450
2600
3000
2850
2700
3150
3300
3450
3600
3750
3900
Pit clear opening length (L) mm
Beam centres mm
Pit
clea
r op
enin
g sp
an (S
) mm
4 p
arts
3 b
eam
s3
par
ts 2
bea
ms
2 p
arts
1 b
eam
2 parts 3 parts 4 parts
A B C D E
2750
2900
6 part (2x3) recessed multispan cover with 2 removable support beams
9 part (3x3) recessed multispan cover with 2 removable support beams
12 part (4x3) recessed multispan cover with 2 removable support beams
8 part (2x4) recessed multispan cover with 3 removable support beams
12 part (3x4) recessed multispan cover with 3 removable support beams
16 part (4x4) recessed multispan cover with 3 removable support beams
L = Pit clear opening length S = Pit clear opening spanCover BeamInset lines denote pit opening
L
A
SB
L
A
SB
L
A
SB
L
A
S B
C
L
A
S B
C
L
A
C
S B
L
A
SB
C
D
L
A
SB
C
D
L
A
C
D
SB
5 p
arts
4 b
eam
s
10 part (2x5) recessed multispan cover with 4 removable support beams
15 part (3x5) recessed multispan cover with 4 removable support beams
20 part (4x5) recessed multispan cover with 4 removable support beams
L
A
S
B
C
D
L
A
S
B
C
D
L
A
C
D
E E E
S
B
4 part (2x2) recessed multispan cover with 1 removable support beam
6 part (3x2) recessed multispan cover with 1 removable support beam
8 part (4x2) recessed multispan cover with 1 removable support beam
6 part (2x3) recessed multispan cover with 2 removable support beams
1300
1450
1600
1750
1900
2000
2150
2300
2450
2600
2750
2900
3300
3150
3000
3450
3600
3750
3900
4300
4150
4000
4450
4600
4750
4900
650
725
800
875
950
650
725
725
800
800
950
950
800
950
950
950
950
650
725
800
875
950
700
675
850
850
1000
850
1000
850
850
850
1000
1000
650
725
725
800
800
950
950
850
850
850
1000
1000
800
800 850 850 650
800 700 700 800
800
950
800
950
800
850
950
950
1000
1000
1000
1000
850
1000
850
1000
1000
800 850 1000 850
800 850 850 850
800 850 700 850
1000
1000
1000
800
800
800
800
850
950
950
Loading
Medium Light Duty Up to 3 tonne slow moving pneumatic tyre wheel loads, (including cars and light delivery vehicles).
Then select product Type from opposite page.
Refer to the table to identify which cover and beam configuration you require against pit clear opening length (L) and pit clear opening span (S). All dimensions are in millimetres.
Note: For other pit clear opening sizes please refer to our technical department.
-
Gatic Parade Tel: +44 (0)1304 203545 Website: www.gatic.com/parade Email: [email protected] 11
aluminiumconnecting plate
removablecrossmember
cover junctionspacer section steel support beam
removablecrossmember
through removablecrossmember atjunction of covers
87 x 30 x 6 mmaluminium channel
beam pocket rebate width: 250 mm
110 mm
loose plate on mortarbedding for correct level
pressed steel wallbox
showing beam pocket in concrete
85 m
mva
ries
acco
rdin
g to
spa
n
varie
s ac
cord
ing
to s
pan
Multispan Covers & Frames – Type AUM / AUM/B and SSM
Loading
Medium Light Duty Up to 3 tonne slow moving pneumatic tyre wheel loads, (including cars and light delivery vehicles).
Typical floor finishCeramic tiles, marble, terrazzo, concrete, resin, wood, and all hard floors.
Optionsn Aluminium (Type AUM) n Aluminium with Brass edge (AUM/B) n Stainless Steel (Type SSM)
Gatic Parade 2 hour fire rated Multispan Aluminium Recessed Covers and Frames with Removable Beams aluminium/brass* edging, top edge dirt seal, mechanically jointed corners, galvanised baseplate and reinforcement, double sealed with socket head securing bolts/unsealed with blanking bolts* to suit a pit clear opening of …… x …… suitable for Medium Light Duty – 3 tonne slow moving pneumatic wheel load Type AUM or AUM/B*
Gatic Parade 2 hour fire rated Multispan Stainless Steel Recessed Covers and Frames with Removable Beams, galvanised baseplate and reinforcement, double sealed with socket head securing bolts/unsealed with blanking bolts* to suit a pit clear opening of …… x …… suitable for Medium Light Duty – 3 tonne slow moving pneumatic wheel load Stainless Steel Grade 304/316* Type SSM
removable crossmember
cover junction spacer section
steel support beam removable crossmember
through removablecrossmember at junction
of covers
showing beam pocket in concrete
110 mm
pressed steelwallbox
loose plate on mortar bedding for correct level
85 m
mva
ries
acco
rdin
g to
spa
n
varie
s ac
cord
ing
to s
pan
3 mm stainless steelchannel section
Type AUM
Type AUM
Type SSM
Type SSM
*delete as appropriate
-
12 Gatic Parade Tel: +44 (0)1304 203545 Website: www.gatic.com/parade Email: [email protected]
Single Covers & Frames – Type SSH/PS
Loading
Medium Duty Up to 5 tonne slow moving pneumatic tyre wheel loads, (including cars and light delivery vehicles).
Typical floor finishExternal grade paving slabs, including granite and concrete, up to 50mm thick.
Optionsn Stainless Steel (Type SSH/PS)
*delete as appropriate
Standard Sizes AvailableSizes shown are typical pit clear opening sizes. Covers can be manufactured to suit virtually any size up to 900 x 900 for this loading group.
Specification…… in No. ………. X………… single recessed cover and frame, Type SSH/PS with 3 hour fire rating to BS476: Part 20: 1987*, Stainless Steel with galvanised baseplate and reinforcement, double sealed with securing bolts – unsealed with blanking bolts*
stainless steel show edge aluminium frame carrier
stainless steel outer frame
fram
e de
pth:
105
mm
reco
mm
ende
d re
bate
: 115
mm
stainless steel corner plate
socketheadsecuring bolt
reinforcement
stainless steelsocket
3.5 mm nominal
double seals
75mm 3.5 mm nominal
structural concrete
frame anchor lug
recommended rebate: 200 mm
frame width: 61.5 mm
�oor �nish (e.g. paving slabs)
Type SSH/PS
Pit Clear OpeningLength x Span
150 x 150300 x 300450 x 300600 x 300750 x 300450 x 450600 x 450750 x 450 600 x 600750 x 600900 x 600750 x 750900 x 750900 x 900
Type SSH/PS
-
Gatic Parade Tel: +44 (0)1304 203545 Website: www.gatic.com/parade Email: [email protected] 13
Duct & Trench Covers & Frames – Type SSH/PS
Loading
Medium Duty Up to 5 tonne slow moving pneumatic tyre wheel loads, (including cars and light delivery vehicles).
Typical floor finishExternal grade paving slabs, including granite and concrete, up to 50mm thick.
Optionsn Stainless Steel (Type SSH/PS)
*delete as appropriate
Standard Sizes AvailableComplex layouts of duct or trench runs can be created- Sizes from 150 to a Max clear opening span of 900mm for this loading group.
SpecificationRecessed duct covers and frames, Type SSH/PS Stainless Steel with galvanised baseplate and reinforcement, double sealed with securing bolts – unsealed with blanking bolts* as per drawing.
stainless steel show edge aluminium frame carrier
stainless steel outer frame fra
me
dept
h: 1
05 m
m
reco
mm
ende
d re
bate
: 115
mm
stainless steelcorner plate
socketheadsecuring bolt
reinforcement
stainlesssteel socket
3.5 mm nominal
double seals
75mm 3.5 mm nominal
structural concrete
frame anchor lug
recommended rebate: 200 mm
frame width: 61.5 mm
�oor �nish (e.g. paving slabs)
Type SSH/PS Type SSH/PS
150 c.o. minimum spanremovable support beam
-
14 Gatic Parade Tel: +44 (0)1304 203545 Website: www.gatic.com/parade Email: [email protected]
Multispan Covers & Frames – Type SSH/PS
1300
1450
1600
1750
1900
2000
2150
2300
2450
2600
2750
2900
3300
3150
3000
3450
3600
3750
3900
650
725
800
875
950
650
725
725
800
800
950
950
800
950
950
950
950
650
725
800
875
950
700
675
850
850
1000
850
1000
850
850
850
1000
1000
650
725
725
800
800
950
950
850
850
850
1000
1000
800
800 850 850 650
800 700 700 800
800
950
800
950
1300
1450
1600
1750
1900
2000
2150
2300
2450
2600
3000
2850
2700
3150
3300
3450
3600
3750
3900
Pit clear opening length (L) mm
Beam centres mm
Pit
clea
r op
enin
g sp
an (S
) mm
4 p
arts
3 b
eam
s3
par
ts 2
bea
ms
2 p
arts
1 b
eam
2 parts 3 parts 4 parts
A B C D E
2750
2900
6 part (2x3) recessed multispan cover with 2 removable support beams
9 part (3x3) recessed multispan cover with 2 removable support beams
12 part (4x3) recessed multispan cover with 2 removable support beams
8 part (2x4) recessed multispan cover with 3 removable support beams
12 part (3x4) recessed multispan cover with 3 removable support beams
16 part (4x4) recessed multispan cover with 3 removable support beams
L = Pit clear opening length S = Pit clear opening spanCover BeamInset lines denote pit opening
L
A
SB
L
A
SB
L
A
SB
L
A
S B
C
L
A
S B
C
L
A
C
S B
L
A
SB
C
D
L
A
SB
C
D
L
A
C
D
SB
4300
4150
4000
4450
4600
4750
4900
800
850
950
950
1000
1000
1000
1000
850
1000
850
1000
1000
800 850 1000 850
800 850 850 850
800 850 700 850
1000
1000
1000
800
800
800
800
850
950
950
5 p
arts
4 b
eam
s
10 part (2x5) recessed multispan cover with 4 removable support beams
15 part (3x5) recessed multispan cover with 4 removable support beams
20 part (4x5) recessed multispan cover with 4 removable support beams
L
A
S
B
C
D
L
A
S
B
C
D
L
A
C
D
E E E
S
B
4 part (2x2) recessed multispan cover with 1 removable support beam
6 part (3x2) recessed multispan cover with 1 removable support beam
8 part (4x2) recessed multispan cover with 1 removable support beam
Loading
Medium Duty Up to 5 tonne slow moving pneumatic tyre wheel loads, (including cars and light delivery vehicles).
Then select product Type from opposite page.
Refer to the table to identify which cover and beam configuration you require against pit clear opening length (L) and pit clear opening span (S). All dimensions are in millimetres.
Note: For other pit clear opening sizes please refer to our technical department.
-
Gatic Parade Tel: +44 (0)1304 203545 Website: www.gatic.com/parade Email: [email protected] 15
A B
Section BB
Section AA
B
A
3 mm stainless steelchannel section
showing beam pocket in concrete
115
mm
110 mm
removablecrossmember removable crossmember
steel support beam
cover junction spacer section
varie
s ac
cord
ing
to s
pan
varie
s ac
cord
ing
to s
pan
loose plate on mortar bedding for correct level
pressedsteel wallbox
through removablecrossmember at junction
of covers
Gatic Parade 2 hour fire rated Multispan Stainless Steel Recessed Covers and Frames with Removable Beams, galvanised baseplate and reinforcement, double sealed with socket head securing bolts/unsealed with blanking bolts* to suit a pit clear opening of …… x …… suitable for Medium Duty – 5 tonne slow moving pneumatic wheel load Stainless Steel Grade 304/316* Type SSH/PS.
Type SSH/PS
Type SSH/PS
Loading
Medium Duty Up to 5 tonne slow moving pneumatic tyre wheel loads, (including cars and light delivery vehicles).
Typical floor finishExternal grade paving slabs, including granite and concrete, up to 50mm thick.
Optionsn Stainless Steel (Type SSH/PS)
*delete as appropriate
-
16 Gatic Parade Tel: +44 (0)1304 203545 Website: www.gatic.com/parade Email: [email protected]
Single Assist Lift Covers & Frames – Type AUH/ALIFT and SSH/ALIFT
Loading
Medium Duty Up to 5 tonne slow moving pneumatic tyre wheel loads, (including cars and light delivery vehicles).
Typical floor finishCeramic tiles, marble, terrazzo, concrete, resin, wood, and all hard floors.
Optionsn Aluminium (Type AUH/ALIFT) n Stainless Steel (Type SSH/ALIFT)
Standard Sizes AvailableSizes shown are typical pit clear opening sizes. Covers can be manufactured to suit virtually any size up to 1000 x 1000mm for this loading group.
Specification…… in No. ………. X………… single recessed cover and frame, Type AUH/ALIFT or SSH/ALIFT*,with 3 hour fire rating to BS476: Part 20: 1987*, Aluminium – Stainless Steel* with galvanised baseplate and reinforcement, hatch to be fitted with concealed hinges and gas springs double sealed with securing bolts – unsealed with blanking bolts*
structural concrete in�ll
reinforcementaluminium show edge
�oor �nishstructuralconcrete
assisted lift spring
concrete �xing73 mm
75 m
m
130 mm 60 mm
frameanchor lug
stainless steel show
edge�oor �nish
(e.g. ceramic tiles)
structural concrete in�ll
reinforcement
cover lifting pointto accept threaded
lifting key
stainless steelcover frame
allowable coveropening angle = 90∞
double sealed
cover basesocket head securing bolt
stainless steel socket
3.5 mm nominal
frame width: 70 mm
assisted lift springincorporating safetystay upon opening
fully adjustable spring bracketto provide framework support
framework screwed to aperture wall
recommended rebate: 210 mm
reco
mm
ende
d re
bate
: 90
mm
118 mm
fram
e de
pth:
75
mm
fully concealedhinge mechanism
Type AUH/ALIFT
Type SSH/ALIFT
Type AUH/ALIFT
Type SSH/ALIFT
Pit Clear OpeningLength x Span
600 x 600750 x 600750 x 750900 x 750900 x 900900 x 10001000 x 1000
*delete as appropriate