panel rip and crosscut saws - panhans.de · panhans panel rip and crosscut saws 2 quality knows no...

Panel rip and crosscut sawsPanel rip and crosscut saws

V 91 basic V 91 twin II 690-B easy4mat pro 690-B easy4mat basic

It‘s the result that matters

PANHANS Panel rip and crosscut saws

2

Quality knows no alternative.

Solid wood elements, coated chip-board boards, full plastic workpieces or light-weight metals - PANHANS sliding table saws always cut a good fi gure.

All products are based on far in excess of 90 years of experience in development and production.

PANHANS stands by its corporate seat in Sigmaringen.

All machines and components are constructed in Germany only and produced in modern production facilities.

PANHANS products have long become synonymous with innova-tion, value retention and reliability - around the world.

Inclination: - 45.5° to + 45.5°Positive and negative mitres can be cut with the PANHANS V 91 models without changing the work-piece position. The workpiece does not need to be turned. This saves time and effort.

The exposed side of the workpiece remains on top, no matter the saw blade‘s inclination.

This way, tear-out-free work is ensured in any case. Shifter cuts become child‘s play.

Protective cover can be turnedThe PANHANS V 91 does not need a hood magazine!The standard protection hood can be turned with two handles and thus adjusted to different saw blade positions.

Turning device for transverse car-riageIf not needed, the cross-carriage can be easily and quickly moved to a parking position.

3

Functional safety as a standard

Double swivel segment bearingThe drive unit is not connected to the worktable.

This PANHANS-specifi c top bearing on both sides prevents transfer of oscillations and vibrations to the work area.

Calibration unitFor automatic calibration of the cutting height to 50 mm at different saw blade diameters.The precise saw protrusion, the precise cutting height are thus warranted at subsequently sharpened saw blades as well.

Maintenance-free double-rolling cart principleTwo joining thick-walled aluminium profi les mark the PANHANS double roller cart. Precisely worked and tension-free screwed, hardened and ground steel guides work without oil fi lm and warrant the utmost smoothness and precision.

Scoring with electronic parking systemThe scoring saw blade thus cannot be-come dirty in the parking position.

Installation of main saw blades with a diameter in excess of 350 mm is possible easily and quickly without removal of the scoring blades.

Display of the current width stop posi-tion with input fi eld for new position value, quick-selection button for the 5 last position values entered, chain size input, setoff fi eld inner size to outer size depending on the workpiece thickness and swivelling angle, function button „width stop parking position and colli-sion run“.

V 91 twin II - Command Centre

4

The 17“ touch screen and a few well-structured operating buttons control all functions. The Windows-based software is at the state of the art and is conti-nually updated.The simple, intuitive menu guidance mostly prevents incorrect operation.

For 20 different saw blades. The data for diameter, steel blade, tooth width and rotating speed serve to set off the width stop position, chain dimension runs, saw blade height ad-justment, position placement of scoring saw, max. speed limit and display of the cutting speed.

Height and swivel adjustment

Display of the current swivel angle and the current height, with input fi elds for new saw blade positions and quick selec-tion buttons for the last 5 position values entered.

Scoring saw adjustment

Display for the current height and side position of the scoring saw and input fi eld for the new scoring saw position.Quick selection buttons for the last 5 entered position values and func-tion button „Parking scoring saw“.

Programme quick selection

6 different cutting sizes can be selected and set to active for positioning. This considers: Swivel angle, cutting height, position width stop, outer size offset, position of scorer in height and sideways. These cutting sizes can be alphanume-rically stored/called in one programme designation.

Calculator

Input keyboard for new position values of the activated axis, including calculati-on function with result assumption into the active position fi eld.

Stepcontrol

Manual adjustment of the axes with stop, height adjustment, swivel angel, scoring height and scoring side position. The desired offset size can be moved manually several times via the +/- but-tons.

With the emergency off pushbutton, speed setting, 3 USB connections, on-off switch for main and scoring saw, start-stop button for positioning release, manual adjustment +/-.

Tool administration

Width stop

Operating button fi eld

5

Width stop

Automatic setoff from the saw blade to the width stop via a graphical display; The calculated size depending on saw blade thickness and swivel angle is displayed. The manual stop is set to this value, the display on the digital display takes place well visibly on the width stop. If the stop can be moved with a motor, the length offset takes place au-tomatically. Including groove program-me, absolute and incremental measure function at electromotor-controlled width stop.

Speed

Display of the current speed and input fi eld for a new speed (smoothly from 1000 - 6000 rpm).

Tool administration

Tool management for 10 different saw blades; The data for saw diameter, steel blade thickness, tooth width and max. speed are used to set-off the cutting height, width stop position, position of the scoring saw and the max. admissible rotating speed.

Programme memory

Programme memory for 25 numeric programmes1 size = 1 programme

Parameter settings

Menu parameter settings for the ma-chine functions and values, password protected, including operating hours counter.

V 91 basic - 5,7“ Touch-Screen

Swivel position

Display of the current swivel position or new position value.

Cutting height

Display of the current cutting height and input fi eld for new position value, inclu-ding optional calibration function.

Scoring saw position

Display for the scoring saw position side and height, including input fi eld for new position values.

Calibration

Menu for automatic or manual calibra-tion of the cutting height, swivel angle, electro motor width stop, scoring positi-on side and height.

The models V 91

- 45,5° + 45,5°

V 91 twin II

The top model in the PANHANS-range

Comprehensively equipped, this panel rip and crosscut saw leaves nothing to be desired no matter the work.All benefi ts of the bilateral saw blade position in combination with reduced serial equipment.

6

45.5° in either direction

Positive and negative mitres can be cut with the PANHANS V 91 models without changing the workpiece position. The workpiece does not need to be turned. This saves time and effort.

The exposed side of the workpiece remains on top, no matter the saw blade‘s inclination. This way, tear-out-free work is ensured in any case. Shifter cuts become child‘s play.

V 91 basic

All benefi ts of the bilateral saw blade position in combination with reduced serial equipment.

Figures include options

This way, tear-out-free work is ensured in any case. This way, tear-out-free work is ensured in any case. This way, tear-out-free work is ensured in any case. This way, tear-out-free work is ensured in any case. This way, tear-out-free work is ensured in any case. Shifter cuts become child‘s play. Shifter cuts become child‘s play. Shifter cuts become child‘s play. Shifter cuts become child‘s play.

V 91 basic

All benefi ts of the bilateral saw blade position in combination with reduced serial equipment.

V 91 twin II

The top model in the PANHANS-range

Comprehensively equipped, this panel rip and crosscut saw leaves nothing to be desired no matter the work.All benefi ts of the bilateral saw blade position in combination with reduced serial equipment.

Figures include optionsFigures include options

7

V 91 basic V 91 twin II - Highlights

Vibration-free swivel drive

The drive unit is not connected to the worktable. This PANHANS-specifi c bearing prevents the transmission of oscillations and vibrations to the working area.

The drive is designed energy-effi ciently. Smooth speed regulation is the standard in this class.

Rotating protective hood

PANHANS sliding saws of the V 91 series work with only one protection hood. The sophisticated rotating mechanism permits adjusting the hood individually to the saw blade position.

Does not need to be replaced - cannot be lost!

Finest cuts

PANHANS sliding saws of the V 91 series can work in any direction.

The saw blade swivelling by 45.5° in either direction opens up new processing options.

The setting via a logically working display facilitates work and ensures highly precise cuts as a result.

V 91 basic

8

Figure includes options

Technical equipment

Electromotor height and swivel adjustment + 45.5° to - 45.5° Control via 5.7“ touch screen at the machine body Motor 7.5 kW / 10.2 PS Rotating speed main saw 1000 - 6000 rpm, gradually Energy-effi cient drive Cutting height 172.5 mm maximum, for saw blade Ø 500 mm Cutting width 1250 mm, opt. 1500 mm, manually adjustable, on request adjustable by electromotor Cutting length roller cart 3200 mm, opt. 2000 / 2600 / 3800 mm Length stop 3200 mm

9

in Detail

Width stop

The cutting width is set manually with the stable stop via fi ne setting and clamping.

The set stop position is digitally indicated well-structured in the rota-ting housing, including switching function for size offset of the stop profi le high/fl at.

Stop can be folded under the table. The absolute measuring system provides the correct size when swivelling up the stop. No calibration required.

Touchscreen 5.7“

The operating element at the machine body of the V 91 basic sliding saw is programmable easily and well-structured.

Cross-carriage with length stop

Stable cross-carriage with carrying roller and quick-lock receptacles

Self-latching tool-less plug-in system for the length stop with moving folding and end stop.

Size setting via scale and magnifying glass.

Smooth speed regulation

The rotating speed of the saw blade can be individually smoothly regulated via the control.

The saw adjusts to the inserted saw blade and the required work steps.

Options pages 18 – 21

V 91 twin II

10

Technical equipment

Electromotor height and swivel adjustment + 45.5° to - 45.5° Control via 17“ touch screen Motor 7.5 kW / 10.2 PS Rotating speed main saw 1000 - 6000 rpm, gradually

Energy-effi cient drive Cutting height 172.5 mm maximum, for saw blade Ø 500 mm Cutting width 1250 mm, opt. 1500 mm, electro-motor adjustment Cutting length roller cart 3200 mm, opt. 2000 / 2600 / 3800 mm Length stop 3200 mm

Figure includes optionsFigure includes options

11

Touchscreen 17 ”

with Windows operating system and intuitive operation for maximum smoothness and precision.

Smooth speed regulation

The saw blade speed can be regulated smoothly individually and with a single action.

The saw adjusts to the inserted saw blade and the required work steps.

Width stop by electro motor with safety system

Safety is important at the width stop as well.

The electronically controlled drive motor recognises persons or objects between the stop and the machine table and stops adjustment in case of danger.Injury or damage to the machine and workpiece are excluded.

Recognition and setoff of the positions of the stop profi le - high or fl at - take place automatically.

The stop can be removed as required.



Self-latching tool-less plug-in system for the length stop with moving folding and end stop


in Detail

Options pages 18 - 21

The 690-B easy4mat Models

12

690-B easy4mat pro

A solid basis, combined with a com-prehensive equipment package.

0° to + 45° - infi nitely

Positive mitres up to an angle of 45° can be performed with the highest precision with the PANHANS panel rip and crosscut saws 690 easy4mat.

690-B easy4mat basic

The high-quality saw with a basic equipment that meets high standards.

690-B easy4mat pro690-B easy4mat pro

A solid basis, combined with a com-A solid basis, combined with a com-prehensive equipment package.


+ 45°


The high-quality saw with a basic equipment that meets high standards.


13

690-B easy4mat pro 690-B easy4mat basic - Highlights

Operating panel

All important functions of the sliding saw 690-B easy4mat can be cont-rolled at a centrally placed operating panel.

The digital display at the machine body shows the current values well-structured.

Positioning control for motor-powered height and swivel adjustment with size input via a numeric keyboard and fi ne setting in the 1/10 mm area above the stepping button.

Circular saw shaft bearing

The long shaft with 2-fold ball bearing , dynamically balanced and the solid, double-guided column guide for height adjustment ensure perfectly calm running.

APA Saw blade quick-tensioning system

The change of saw blade is very simple and very fast. One tool is enough to replace the present saw blade without latching of the saw shaft.



Self-latching tool-less plug-in system for the length stop with moving folding and end stop.


W

W

690-B easy4mat pro

14

Technical equipment

Electromotor-powered height and swivel adjustment 0 to + 45° via position control Motor 5.5 kW / 7,5 PS 7.5 kW / 10 PS optional Rotating speed main saw 3000 / 4000 / 5000 / 6000 rpm Cutting height 145 mm maximum, for saw blade Ø 450 mm 170 mm optional, for saw blade Ø 500 mm 195 mm optional, for saw blade Ø 550 mm Cutting width 1250 mm, opt. 1500 mm, manually adjustable, can be adjusted by electro motor on request Cutting length roller cart 3200 mm, opt. 2000 / 2600 / 3800 mm Length stop 3200 mm

+ 45°

15

in Detail


Large cutting height

The cutting height of the sliding circular saw 690-B easy4mat in the standard design is up to 145 mm depending on the saw blade used.

A cutting height expansion to 170 or 195 mm, at a maximum saw blade diameter of 500 or 550 mm, is possible as an option.

Protective hood

The PANHANS protective hood with integrated dust extraction effec-tively protects the operator from injury.

With replaceable insert, narrow for 90°, wide for 45°.

The optional protective cover can be turned and renders hood change unnecessary.

Selectable speed

A belt change at the drive unit permits quick adjustment of the desired speed.

Switching takes place comfortably and easily accessible with a quick-clamping lever.

Robust width stop

The cutting width is set manually with the stable stop via fi ne setting and clamp.

The moving scale ensures precise setting of the workpiece width.

The step can be swivelled under the worktable if required.

On request, the width stop can be equipped with an electromotor-powered adjustment.


16

Technical equipment

Electromotor-powered height and swivel adjustment 0 to + 45° via position control Motor 5.5 kW / 7,5 PS 7.5 kW / 10 PS optional Rotating speed main saw 4000 rpm Cutting height 75 mm maximum, for saw blade Ø 315 mm Cutting width 1250 mm, opt. 1500 mm, manually adjustable Cutting length roller cart 3200 mm, opt. 2000 / 2600 / 3800 mm Length stop 3200 mm

+ 45°

17

Extraction hood on splitting wedge

The protective hood at the splitting wedge has an integrated extraction connection.

It can be used for saw blades up to a diameter of 315 mm.

in Detail


Robust width stop

The cutting width is set manually with the stable stop via fi ne setting and clamp.

A moving scale ensures precise setting of the workpiece width.

The step can be folded under the worktable if required.

Adjustable cutting height

The cutting height can be set individually. Up to 75 mm are possible - with the matching saw blade.

18

Special Equipment

Digit-PAB item no. 4455

Special equipment can be combined with

V 91 basic V 91 twin II

690-B easy4mat pro 690-B easy4mat basic

1 2

3 4

3 4

R 4 remote control item no. 4155 3 4

Width stop electromotive 1250 mm and 1500 mm widet

Calibration device Item no. 4583 1 2 3 4

Operating panel top, no. 4587 3 item no. 4593 1

Digital measuring displays for the width stop with switching function and size offset. The stop profi le can be used high or fl at.

The set stop position is displayed digitally and well-structured in the rotating housing.

The absolute measuring system provides the correct size even after swivelling away the stop.No calibration required; Reproducible dimensional accuracy 0.1 mm

Larger cutting widths at the width stop can be set manually from the roller cart side.

Only applicable in connection with Digit-PAB.

Electromotor adjustment with an accuracy of 0.1 mm. The dimension input via keyboard, automatic positioning with ID and setoff of the stop profi le (high/fl at), including safety deactivation strip

The stop top can be removed to create a free table space. It is operated from the roller cart side.

1250 mm for model V 91 basic item no. 44131250 mm for model 690-B easy4mat pro item no. 44111500 mm for model V 91 basic item no. 44141500 mm for model V 91 twin II item no. 45901500 mm for model 690-B easy4mat pro item no. 4412

For automatic calibration of the cutting height to 50 mm at different saw diameters.

For subsequently sharpened saws, the precise saw protrusion or cutting height after saw blade change is secured at all times.

Operating panel placed at eye level on top, including a circular saw protection device that can be swivelled away and a comfortable table widening.

Sensible when cutting large plates.

1 2 3 4

19

Double-sided mitres top DSG

SUPER-GEHRFIX II item no. 4385 item no. 4303

Mitre auxiliary stop item no. 4173 1 2 3 4

1 2 3 4

Standard mitre stop item no. 4591 item no. 4592

1 23 4

SUPER-GEHRFIX I item no. 4383 item no. 4315

1 23 4

The stop is fastened on the roller cart and can be swivelled to either side.

The roller cart groove has a degree scale from 45 – 60°, with extensible shortening stop up to 2000 mm length and a stop fl ap.

Combined mitre and length stop with extraordinary performance spect-rum - manually and fi tting exactly.

For angular cuts of 45° to 135°, with standard length stop.

Integral numbers and intermediate degree values are available for the angles 67.5/78.75/101.25/112.5°.

Automatic length compensation via a grid curve of stainless steel.

Combined mitre and length stop for angle cuts of 45° to 135°, with standard length stop.

With digital display of the degrees; Can be set and read to 0.1° without grid.

Automatic length compensation via a grid curve of stainless steel.

The trouble-shooter when producing blunt and pointy mitres

Can be combined with Super-Gehrfi x I + IIFor stopping and damage-free shortening of mitres already cut to size

As an additional stop for the length stop with adjustable angle, offset size against the stop fl ap 100 mm.

The DSG solves all tasks quickly and smoothly when producing mitre cuts at narrow and short workpieces at any angle from 0° - 90°.

Easy handling and quick assembly on the ALU-double roller cart; With length compensation for infeed angles 5/10/15/22.5/30/45/60/67.5° for shortening up to 1375 mm; The scope of delivery includes splinter wood and a practical wall holder.

DSG A-S length and angle size accordingly via scale item no. 4379DSG A-D length size via scale and angle size is digital item no. 4380

1 23 4

Special equipment can be combined with

V 91 basic V 91 twin II

690-B easy4mat pro 690-B easy4mat basic

1 2

3 4

Special Equipment

20

Parallel stop item no. 4488 1 2 3 4

Scoring saw auto EPS 1 2 3 4

Scoring system Quick-Step

Length stop Tele-Digit item no. 4166 item no. 4167

Protection devices can be swivelled away item no. 4498 3

Stop that can be moved on the roller cart for cutting long narrow strips with a cutting width up to 800 mm

Easily adjustable via the adjustable measuring scale

Including folding stop and magnifying glass.

With central digital and wireless dimension indication 0.1 mm Can be switched between the front and rear stop fl ap

Can be used at up to 3000 mm

The Tele-Digit length stop is used instead of the standard length stop.

Electromotor-powered positioning for the side and height adjustment, including the parking position behind the main saw blade

Larger saw blades can be used without removal of the scoring saw blades.The scoring saws are not in the contaminated area. When activated, the unit moves to the saved setting positions.

for model V 91 basic item no. 4213 for model V 91 twin II item no. 4571for model 690-B easy4mat pro/690-B easy4mat basic item no. 4384

Tool-free manual adjustment of the scoring width of 2.8 to 3.8 mm by grid adjustment by 0.05 mm

Including a set of scoring saw blades

The main saw blade is set quickly and easily.

for model V 91 basic and V 91 twin II item no. 4565for model 690-B easy4mat pro/690-B easy4mat basic item no. 4550

Including full-area comfortable table widening 1200 x 780 mm for cutting extremely high workpieces

High operating comfort at saw blade change

Can only be used in combination with standard control - at the machine body.

1 2 3 4

1 23 4

21

Laser item no. 4320 1 2 3

Additional support item no. 4321 1 2 3 4

Remote latching of the roller cart item no. 4483 1 2 3 4

Turn-away device item no. 4440 1 2 3 4

For visual display of the cutting joint on scoring or trimming cuts, in boards with wood edge

The laser is attached to the protection device.

Blocking the top cart in the loading position on the far right

This way, large plates can be easily aligned on the machine.

Support can be slid into the roller cart, preventing hanging through of large plates.

Swivels the cross-carriage including set-up length stop into the parking position behind the machine table.

Quick and safe to operate by one person

Swivelling away creates a free access right next to the roller cart.

Circular saw infeed device item no. 2078

Special Panhans know-how for contemporary production.For safe and rational cutting of strips, boards, window scantlings, etc. of solid wood.3 height-adjustable infeed rollers up to a height of 80 mm, actuated via hand wheel; 2 infeed speeds (13 + 26 m/min); Extraction socket 80 mm diameter. Simple, fast and tool-free assembly at the width stop instead of the stop profi le. Width setting via the width stop with offset size 100 mm.Including automatic clamp on the machine table via safety magnet.

1 2 3 4

22

V 91 twin II

• Saw blade swivelling• Saw blade Ø maximum • Cutting height/angle 90° +/- 45.5° • Cutting width standard optional • Cutting length standard optional • Saw blade change• Main saw blade seat Ø

• Motor output• Speed

• Extraction machine body protection hood

• Weight

+/- 45.5°500 mm

172,5 mm120 - 90 mm1250 mm1500 mm3200 mm2000 / 2600 / 3800 mm

APA quick-clamping system30 mm

7.5 kW / 10.2 PS1000 to 6000 rpm infi nitely

120 mm80 mm

1300 kg

Technical data

Weitere Ausführungen auf Anfrage.Technische Änderungen vorbehalten.

• Saw blade swivelling• Saw blade Ø maximum • Cutting height/angle 90° +/- 45.5° • Cutting width standard optional • Cutting length standard optional • Saw blade change• Main saw blade seat Ø

• Motor output• Speed


• Weight

+/- 45.5°500 mm

172.5 mm120 - 90 mm1250 mm1500 mm, el. adjustment3200 mm2000 / 2600 / 3800 mm


7.5 kW / 10.2 PS1000 to 6000 rpm infi nitely

120 mm80 mm

1050 kg

690-B easy4mat pro

• Saw blade swivelling • Saw blade Ø maximum standard optional(1) optional(2) • Cutting height/angle 90° standard optional(1) optional(2) + 45° standard optional(1) optional(2)• Cutting width standard optional • Cutting length standard optional

• Saw blade change• Main saw blade seat Ø

• Main saw blade seat Ø standard optional• Speed


• Weight

+ 45°450 mm500 mm550 mm

145 mm170 mm195 mm105 mm122 mm138 mm1250 mm1500 mm, el. adjustment3200 mm2000 / 2600 / 3800 mm


5.5 kW / 7.5 PS7.5 kW / 10 PS3000/4000/5000/6000 rpm

120 mm80 mm

1050 kg

• Saw blade swivelling • Saw blade Ø maximum • Cutting height/angle 90° + 45° • Cutting width standard optional • Cutting length standard optional

• Saw blade change• Main saw blade seat Ø

• Main saw blade seat Ø standard optional• Speed


• Weight

+ 45°315 mm

75 mm57 mm1250 mm1500 mm 3200 mm2000 / 2600 / 3800 mm


5.5 kW / 7.5 PS7.5 kW / 10 PS4000 rpm

120 mm80 mm

1050 kg

V 91 basic


23

Dimensions Cutting length 3200 mm

30701650

3510**

14202260

8201550

340

1900

415

3320max.

3200

3400**

0-axis saw blade

1600*1700*

Cutting length 3800 mm

30701650

4110**

14202260

8201550

340

1900

415

3320max.

3800

4000**

1900*2000*

* **

Dimensions in latched basic positionMax. movement of the roller carriage

30701650

2910**

14202260

8201550

340

1900

415

3320max.

2600

2800**

1300*1400*

30701650

2310**

14202260

8201550

340

1900

415

3320max.

2000

2200**

1000*1100*

0-axis saw blade * **


Cutting length 2600 Cutting length 2000





Further versions on request.Technical changes reserved.

HOKUBEMAMaschinenbau GmbH

Anton-Günther-Straße 3 - 7D-72488 Sigmaringen

Phone +49 (0)7571 755-0Fax +49 (0)7571 755-222

[email protected]

FS e

ng 4

/201

4-1.

0

Drilling Sawing Milling Planing SI-TEC Service

Front and rear sawing aid Multi-Cut item no. 3364

Safety-Power item no. 3368

Safety-Max item no. 3365

For safe separating, trimming, sawing according to scoring line and upright grooving of solid wood and boards.

Solid wood can be safety held with the 3 clamping tips each.The opposite rubber edges can also fasten workpieces up to approx. 10 mm width safely and without damage.

Simple clamping in the T-groove of the roller cart by adjustable guide elements with a groove width of 19-23 mm.

Safety-Power for safe fastening of short and narrow workpieces at the stop, in the entire area from +45° to -45°

Guide elements can be set from 19-23 mm groove width.

(recommended in connection with Safety-Cut plus)

For safe guidance of workpieces to the right of the circular saw blade.

The precise guide at the aluminium profi le of the circular saw stop keeps the operator‘s hand permanently outside of the danger area and prevents danger of accident if handled appropriately.

Additional equipment from the HOKUBEMA SI-TEC programme

QQ

UALITÄT

S=Sicherheit

panel rip and crosscut saws - panhans.de · panhans panel rip and crosscut saws 2 quality knows no...

Documents