pian�loss™ Standard core

4' x 8' x 1.0mm

Standard grade only 5

CertificationContact us for Technical Specification Sheets, Fire Rated and Singapore Green Label Certificates.

Limited WarrantyPanaplast warrants that within one (1) year from the first sale, its products are reasonably free of defects and when properly handled and fabricated will comply, within reasonable deviations, to applicable manufacturing specifications. In the event that manufacturing defects occur during the warranty period, our liability is limited to the replacement of defective sheets or reimbursement of the cost of such sheet(s) only.

Clients are advised to inspect products thoroughly prior to installation. Panaplast’s warranty will not cover defects and non-compliance arising from and/or otherwise attributable to any other causes, including, without limitation:

• Improper handling/transportation/storageof the products

• Improper installation of the products• Improper or unintended usage of the products• Lack of or improper maintenance of the products• Exposure of the products to extreme temperatures • Unauthorized alteration to the products• Outdoor applications

Further InfoVisit our website at www.panaplast.com.sg for more information.

Disclaimer

The information provided in the Panaplast catalogue is for reference and serves as a guide only. Panaplast does not warrant the accuracy and completeness of this information nor guarantee any of the properties of the products set out here. Suitability of design and application for use are to be determined by the client, in consultation with its professional advisers. Actual colours of the laminate sheet may vary from this brochure.

Panaplast reserves the right to amend or update product description at any time. Panaplast is not liable for any damage arising from or related to reliance on the catalogue.The intellectual property in the catalogue belongs to Panaplast and or its manufacturers.

Full size images of laminate sample pieces in the catalogue are available for download on our website. Clients should download the images online to view the laminate sheet in its entirety or request for a bigger sample.

General Use & Care GuidePanaplast laminates are manufactured with aesthetics and durability in mind. When used as recommended and with appropriate care, our laminates will last through the years. Panaplast laminates are easy to maintain:

• Cleaning should be done with water and a clean, non-abrasive cloth.• To remove more stubborn stains, use mild household cleansers or detergents to gently wipe down with a non-abrasive cloth.• Avoid the use of abrasive liquid cleansers, bleaching compounds

or solutions as these may damage the surface of the laminate.• Do not place hot cookware directly on the laminate. Prolonged

exposure to temperatures above 60 degrees Celsius may cause damage to the laminate surface.• Do not use the laminate for purposes that it is not intended for. (E.g. do not iron, chop, hammer or expose the laminate to open flame.)• Outdoor application of the laminate with exposure to direct sunlight and weather conditions are not recommended. • UV rays may alter the colour of the laminate.• Gloss surfaces are recommended only for vertical applications. Duotone Edge-Band

• Do not use thinner and toluene on the surface of theedge-bands, this may cause decolourisation of the surface. Hexane, alcohol and white kerosene are recommended.

• Store the edge-bands at temperatures below55 degrees Celsius.

• Peel off the protective film after processing.

Panaplast Laminates • Typically conform to internationally recognised technical

standards. Kindly contact us for a certificate.• Have a thickness tolerance of +/- 10%.• Postform grade laminates are available upon request only.

Antibacterial GradeAll Nosimo decors have antimicrobial properties that conform to the guidelines of the Society of International sustaining growth for Antimicrobial Articles (SIAA). Kohkin is the inhibition of proliferation of bacteria on the surface of products. The Japanese Industrial Standards (JIS) stipulate that a product has antimicrobial effects when the proportion of bacteria on the surface of the product is 1/100 or less (antimicrobial activity value is 2 or more) of that on the surface of a non-treated product. More information can be found on kohkin.net.

P R O D U C T I N F O R M A T I O N

Inorganic antimicrobial agent impregnated