Promethean Interactive White Board TrainingI. PARTS of the Promethean Board (Use flip chart to show)

a. The Projectori. You should not press buttons on thisii. Must remember to turn off NIGHTLY (can take several days for new bulbs)

b. The Boardi. Location of Flame (power/ connectivity)ii. Location of Sound Controlsiii. NO chalk & NO Dry Erase Markers! NO MARKERS - NONE AT ALL!!! EVER!!!

c. The Flamei. Red = Bad – there is connection issueii. White = Goodiii. No Light – not plugged in/ no power

d. Sound Controls – sound from laptop connects via usb. (VHS players connect through the AV Yellow, Red, White cables.) The cable on teacher plate is for iPods, etc. only. Keep with remotes. If left plugged in it may cause interference/crackling.

i. Speakers located on boardii. Red on left side of board = Offiii. Green on left side of board = Oniv. Suggest that you put all items on max volume, computer, etc. and use master volume switch on the boardv. NO Sound??? Check to see if standby button is green, check adaptor on back of board to see if plugged in. No TV Sound??? Use source button on tuner remote.

e. The Pens – You get 2, there is a specific place for them located on the left side of the board.

i. Teacher (dark) and Student Pen (light)ii. Don’t Drop or will breakiii. KEEP Pens ON BOARD!!!

f. Questions???II. The Teacher Plate – ALWAYS leave teacher plate plugs plugged into the plate. If you need to unplug something, unplug cables from external media, not plate.

a. Computer Hookup – VGA (blue brick) plug into plate and laptop b. Computer Audio – goes through usb cable.

i. plug usb cable into laptop and into plate – EGG closest to NESTc. VHS (Yellow/White/Red) – to plug in your VHS playere. USB Port - ***one is designated FOR the promethean board on the plate.

i. The Egg on the Cable closes to Panel – EGG closest to NESTii. Can’t use regular USB Cable – MUST use one w/ egg.

f. Data Port – CAT5 cable for network connectiong. Questions???

III. The Remote Controlsa. Promethean Projector Remote

i. Power Button 1. One Push On2. Two Push Off

ii. Computer 1 – Computer Outputiii. Computer 2 – Television Control (then you need tuner remote)iv. Video – allows you to use your VHS player.v. Freeze – freezes whatever is on the screen in case you want to do something else like attendance or email while your kids are working. (ex: while your kids are doing a warmup)vi. No Show – Blacks the screen bur leaves the bulb ON!!! (Only for brief periods)

b. TV Tuner Remotei. Power Button – press firmly and look for green light

ii. Channel Up/Channel Downiii. If having problems, press the source button. This usually fixes it.

c. Questions???IV. The Document Camera (This could be different depending on the camera)

a. Hook up – VGA (blue square end) IN =from computer to camera, VGA out = from the camera to plateb. Power On (that turns board to the camera view / off ActivInspire)c. Source button on doc camera will allow you to toggle between the computer and

camera.V. Connecting the Laptop

a. 1st VGA cable = Plug VGA cable into Laptop, plug other end into VGA IN on your doc camera. 2nd VGA cable = Plug VGA cable into VGA OUT on doc camera, plug other end of VGA cable into teacher plate.b. Plug USB cable in Laptop c. Plug other end of USB cable w/ egg into teacher platec. Boot Laptop, then power on projectord. If cables already connected (Win + P) to bring up monitor menu. = SELECT DUPLICATE to show view on laptop and board.e. Questions???

VI. Calibrating the Boarda. Hold Pen tip over The Flame (turns blue) = board will ask you to calibrateb. Should be done at beginning of day or any time you remove and hook up your computerc. Pen is active mouse while you are not in ActivInspire

VII. Opening ActivInspirea. Found in Main Menu b. Suggest Pin to Taskbar (don’t just click and drag to desktop)c. Questions??? * Ctrl – S , to save DOES NOT work in ActivInspire.

VIII. Getting Starteda. Plug Promethean board into the NEW outlet directly beneath your Promethean board. b. Plug up teacher laptop, document camera, and teacher plate.c. USE the Cat5 plug on your laptop. Plug it into the laptop and the teacher plate. If you

show videos, stream, etc. they will work much better this way.d. Power on laptop FIRST, then projectore. Make sure the light on the projector is green. Orange or red indicates no power or a

problem. If your projector light does not turn green, pull power cord out of the back of the projector, wait 2 full min and plug in. Look for green light.

f. Check green light on left side of board for sound connectivityg. Is your picture missing??? (Win + P = duplicate)h. Open ActivInspire – pin and unpin the toolbar in AvtivInspire. Select your pen color,

select pen, and select blue box with black scribble on it (annotate desktop shortcut), then minimize.

i. Open your word or ppt document and annotate with pen, the ActivInspire toolbar should remain up. Annotate on top of something. If you have multiple pages in word, then you must erase the ink layer before you go to the next page. Ink MOVES in multiple page word docs. It does not in ppt.

j. Open a timer in ActivInspire = In the resource browser window on left, click on the resource browser button (looks like a movie take board). It will open a window beneath. Click on the + by Lesson Building Tools select Gadgets select a timer.

k. Turn on tuner with tuner remote, green light should show. Press computer 2 on promethean remote to toggle to TV, select channel 41 on TV. Toggle back to Promethean board.

l. Turn on doc camera – this will automatically turn on your board to the camera. Place a overhead or worksheet under and write on it. There is a slight delay in the projection. Press source button on CAMERA to toggle back to the board. The camera HAS to be plugged in.

m. The promethean flipchart is located in L - - Promethean Training

n. Questions???IV. Your Assignment

a. Go to your room or your buddy’s room. You will need to complete the following in both rooms.

b. Install ActivInspire on your laptop. Log on as: MSLInstal , PW: Salem2011 . Go to Start Computer L Promethean ActivInspire. License number is in the word doc. You will need it. To install, right click on ActivInspireSuite_v… and select install as an administrator. Agree to the defaults.

c. Complete “Can I do the following?” section on back of this sheet.d. If you have immediate assistance, teacher trainers will be close by to assist.e. If during the year you have any questions, please write them down and email

mewarren@vbschools.com

Can I do the following???___ I installed ActivInspire on my laptop. Shut laptop off.

___ Plug the Promethean board power cord into the NEW outlet directly beneath your Promethean board.

___ Plug up teacher laptop, document camera, and teacher plate.

___ USE the Cat5 plug on your laptop. Plug it into the laptop and the teacher plate. If you show videos, stream, etc. they will work much better this way.

___ Power on laptop FIRST

___ Power on Projector using remote. Make sure the light on the projector is green. Orange or red indicates no power or a problem. If your projector light does not turn green, pull power cord out of the back of the projector, wait 2 full min and plug in. Power on and look for green light.

___ Check green light on left side of board for sound connectivity.

___ Is your picture missing??? (Win + P = duplicate)

___ Open ActivInspire – pin and unpin the toolbar in AvtivInspire. Select your pen color, select pen, and select blue box with black scribble on it (annotate desktop shortcut), then minimize.

___ Open your word or ppt document and annotate with pen, the ActivInspire toolbar should remain up. Annotate on top of something. If you have multiple pages in word, then you must erase the ink layer before you go to the next page. Ink MOVES in multiple page word docs. It does not in ppt.

___ Open a timer in ActivInspire = In the resource browser window on left, click on the resource browser button (looks like a movie take board). It will open a window beneath. Click on the + by Lesson Building Tools select Gadgets select a timer.

___ Turn on tuner with tuner remote, green light should show. Press computer 2 on promethean remote to toggle to TV, select channel 41 on TV. Toggle back to Promethean board.

___ Turn on doc camera – this will automatically turn on your board to the camera. Place a overhead or worksheet under and write on it. There is a slight delay in the projection. Press source button on CAMERA to toggle back to the board. The camera HAS to be plugged in.