palm scope
TRANSCRIPT
-
7/31/2019 Palm Scope
1/5
PALMSCOPE
(IEEE PAPER)
Abstract:-
Palmscope is a type of electronic test instrument that allows
observation of constantly varying signal voltages, usually as a two-
dimensional graph of one or more electrical potential differences using the
vertical or 'Y' axis, plotted as a function of time, (horizontal or 'x' axis).
Although an oscilloscope displays voltage on its vertical axis, any other
quantity that can be converted to a voltage can be displayed as well. In
most instances, Palmscope show events that repeat with either no change
or change slowly.
Palmscope are commonly used to observe the exact wave shape of
an electrical signal. In addition to the amplitude of the signal, an
oscilloscope can show distortion, the time between two events (such as
pulse width, period, or rise time) and relative timing of two related
signals. Palmscope are used in the sciences, medicine, engineering, and
telecommunications industry. General-purpose instruments are used for
maintenance of electronic equipment and laboratory work. Special-
purpose Palmscope may be used for such purposes as analyzing an
-
7/31/2019 Palm Scope
2/5
automotive ignition system, or to display the waveform of the heartbeat as
an electrocardiogram.
-
7/31/2019 Palm Scope
3/5
INRTODUCTION
In this project we have got two channel that will decode the input
data and with the help of ADC and the signal is processed and given to
the micro controller. The micro controller will read the data and the data
is represented on GLCD. Here we use 128x64 LCD and the data is shown
in a graphical form. There is an select switch used to select the channel.
The data is also stored in the SSD card available. The data at the sametime will be sending to the computer with the help of serial interface. The
input voltage will be scaled to 0 5v scale and will be represented on the
GLCD.
This unit is simple and handy to use. This unit can be run with the
help of battery supply. Hence we can use this as a mobile scope which can
be used to read different signals from different electronic circuit.
This device will be powered by Renesass 16bit R8C/25 family
micro-controller. Renesas is the worlds largest micro controller
manufacturer. Its chips are found in BMWs iDrive and very recently in
Toyota Prius hybrid car..
-
7/31/2019 Palm Scope
4/5
BLOCK DIAGRAM
RENESAS R8C MCU
Signals to be
measured 1 Graphical LCD
Multimedia Card (MMC) Serial Interface to PC
Power Supply
Signals to be
measured 2
ADC Channel 2
ADC Channel 1
Select Switch
-
7/31/2019 Palm Scope
5/5
COMPONENTS USED
Sl No:- Components Quantity
1 Microcontroller R8c25 1
2 GLCD 128x64 1
3 MMC Card 64MB 1
4 ADC Interface 1
5 Serial Interface(Rs232) 1
6 Power Supply ( 5v, 3.3v) 1 each