packing density
TRANSCRIPT
![Page 1: Packing density](https://reader036.vdocuments.us/reader036/viewer/2022081720/55a3cf801a28ab140d8b47f0/html5/thumbnails/1.jpg)
Introduction to Materials
Science and Selection
![Page 2: Packing density](https://reader036.vdocuments.us/reader036/viewer/2022081720/55a3cf801a28ab140d8b47f0/html5/thumbnails/2.jpg)
© 2
00
3 B
rook
s/Cole P
ub
lishin
g / T
hom
son
Learn
ing™
© 2
00
3 B
rook
s/Cole P
ub
lishin
g / T
hom
son
Learn
ing™
Metals
Ceramic
combination
with a metal
Associated
with polymers
Semiconductor
materials
![Page 3: Packing density](https://reader036.vdocuments.us/reader036/viewer/2022081720/55a3cf801a28ab140d8b47f0/html5/thumbnails/3.jpg)
Representative strengths of various
categories of materials
© 2
00
3 B
rook
s/Cole P
ub
lishin
g / T
hom
son
Learn
ing™
![Page 4: Packing density](https://reader036.vdocuments.us/reader036/viewer/2022081720/55a3cf801a28ab140d8b47f0/html5/thumbnails/4.jpg)
Atomic Bonding
Primary bonding: Metallic bond, Covalent bond, Ionic bond.
Secondary bonding: Van der Waals interactions (London forces, Debye interaction, Keesom interaction)
Intermetallic compound is a compound such as Al3V formed by two or more metallic atoms
![Page 5: Packing density](https://reader036.vdocuments.us/reader036/viewer/2022081720/55a3cf801a28ab140d8b47f0/html5/thumbnails/5.jpg)
Metallic Bonding
The metallic bond forms when atoms give up their valence electron, then forms an electron sea.
The positively charged atom cores are bonded by mutual attraction to the negatively charged electrons.
When voltage is applied, the sea of electrons can move freely to produce a current.
© 2
00
3 B
rook
s/Cole P
ub
lishin
g / T
hom
son
Learn
ing™
![Page 6: Packing density](https://reader036.vdocuments.us/reader036/viewer/2022081720/55a3cf801a28ab140d8b47f0/html5/thumbnails/6.jpg)
Covalent Bonding
Covalent bonding
requires that
electrons be shared
between atoms in
such a way that
each atom has its
outer sp orbital filled.
In silicon, with a
valence of four, four
covalent bonds must
be formed.
![Page 7: Packing density](https://reader036.vdocuments.us/reader036/viewer/2022081720/55a3cf801a28ab140d8b47f0/html5/thumbnails/7.jpg)
Ionic Bonding
An ionic bond is the result of electron transfer from one atom to another.
When sodium donates its valence electron to chlorine, each becomes an ion; attraction occurs, and the ionic bond is formed.
It is important to knot that ionic bonds are nondirectional. A positively charged Na+ will attract any adjacent Cl- equally in all directions!
© 2003 Brooks/Cole Publishing / Thomson Learning™
![Page 8: Packing density](https://reader036.vdocuments.us/reader036/viewer/2022081720/55a3cf801a28ab140d8b47f0/html5/thumbnails/8.jpg)
Ionic Bonding
© 2003 Brooks/Cole Publishing /
Thomson Learning™
When voltage is
applied to an ionic
material, entire ions
must move to cause
a current to flow.
Ion movement is
slow and the
electrical
conductivity is poor.
![Page 9: Packing density](https://reader036.vdocuments.us/reader036/viewer/2022081720/55a3cf801a28ab140d8b47f0/html5/thumbnails/9.jpg)
Atomic Arrangement
Levels of atomic arrangements in materials:
(a) Inert monoatomic gases have no regular ordering of atoms
(b, c) Some materials, including water vapor, nitrogen gas, amorphous silicon and silicate glass have short-range order.
(d) Metals, alloys, many ceramics and some polymers have regular ordering of atoms/ions that extends through the material. (c) 2003 Brooks/Cole Publishing / Thomson
Learning™
![Page 10: Packing density](https://reader036.vdocuments.us/reader036/viewer/2022081720/55a3cf801a28ab140d8b47f0/html5/thumbnails/10.jpg)
Example: LCD
Liquid crystal display.
These materials are amorphous in one state and undergo localized crystallization in response to an external electrical field
Widely used in liquid crystal displays. (Courtesy of Nick Koudis/PhotoDisc/GettyImages.)
![Page 11: Packing density](https://reader036.vdocuments.us/reader036/viewer/2022081720/55a3cf801a28ab140d8b47f0/html5/thumbnails/11.jpg)
Lattice, Unit Cells, and Crystal
Structures
Lattice - A collection of points that divide space into smaller equally sized segments.
Unit cell – The simplest repeating unit of any structure that can be stacked to fill space. All atoms must be the same in every unit cell.
Atomic radius - The apparent radius of an atom, typically calculated from the dimensions of the unit cell, using close-packed directions (depends upon coordination number).
Packing factor - The fraction of space in a unit cell occupied by atoms.
![Page 12: Packing density](https://reader036.vdocuments.us/reader036/viewer/2022081720/55a3cf801a28ab140d8b47f0/html5/thumbnails/12.jpg)
Definition of the lattice parameters
(c) 2003 Brooks/Cole Publishing / Thomson Learning™
Their use in
cubic,
orthorhombic,
and hexagonal
crystal systems
![Page 13: Packing density](https://reader036.vdocuments.us/reader036/viewer/2022081720/55a3cf801a28ab140d8b47f0/html5/thumbnails/13.jpg)
Hexagonal close packed
structure (HCP)
The hexagonal close-packed (HCP) structure (left) and its unit cell.
(c) 2003 Brooks/Cole Publishing / Thomson
A
B
A
![Page 14: Packing density](https://reader036.vdocuments.us/reader036/viewer/2022081720/55a3cf801a28ab140d8b47f0/html5/thumbnails/14.jpg)
Remember Miller Indices?
For directions: Determine coordinates
for “head” and “tail” of the direction
“head”-”tail”
Clear fraction/reduce results to lowest integers.
Enclose numbers in [] and a bar over negative integers.
For planes: Identify points at which
the plane intercepts the x, y, z axis.
Take reciprocals of these intercepts.
Clear fractions and do NOT reduce to the lowest integers.
Enclose the numbers in parentheses () and a bar over negative integers.
![Page 15: Packing density](https://reader036.vdocuments.us/reader036/viewer/2022081720/55a3cf801a28ab140d8b47f0/html5/thumbnails/15.jpg)
Special note for directions…
For Miller Indices of directions: Since directions are vectors, a direction and its
negative are not identical! [100] ≠ [100] Same line, opposite directions!
A direction and its multiple are identical! [100] is the same direction as [200] ( need to reduce!)
[111] is the same direction as [222], [333]!
Certain groups of directions are equivalent; they have their particular indices because of the way we construct the coordinates. Family of directions: <111>=[111], [111],[111],[111],…
![Page 16: Packing density](https://reader036.vdocuments.us/reader036/viewer/2022081720/55a3cf801a28ab140d8b47f0/html5/thumbnails/16.jpg)
Special note for planes…
For Miller Indices of planes: Planes and their negatives are identical (not the
case for directions!) E.g. (020) = (020)
Planes and their multiples are not identical (Again, different from directions!) We can show this by defining planar densities and planar packing fractions. E.g. (010) ≠ (020) See example!
Each unit cell, equivalent planes have their particular indices because of the orientation of the coordinates. Family of planes: {110} = (110),(110),(110),(101), (101),…
In cubic systems, a direction that has the same indices as a plane is perpendicular to that plane.
![Page 17: Packing density](https://reader036.vdocuments.us/reader036/viewer/2022081720/55a3cf801a28ab140d8b47f0/html5/thumbnails/17.jpg)
Calculate the planar density and planar packing fraction for the (010) and (020) planes in simple cubic polonium, which has a lattice parameter of 0.334 nm.
Example: Calculating the Planar Density and Packing Fraction
(c) 2003 Brooks/Cole Publishing /
Thomson Learning™ a0a0
![Page 18: Packing density](https://reader036.vdocuments.us/reader036/viewer/2022081720/55a3cf801a28ab140d8b47f0/html5/thumbnails/18.jpg)
2142
2
atoms/cm 1096.8atoms/nm 96.8
)334.0(
faceper atom 1
face of area
faceper atom (010)density Planar
SOLUTIONThe total atoms on each face is one. The planar density is:
The planar packing fraction is given by:
79.0)2(
)(
)( atom) 1(
face of area
faceper atoms of area (010)fraction Packing
2
2
20
2
r
r
r
a
However, no atoms are centered on the (020) planes. Therefore, the planar density and the planar packing fraction are both zero. The (010) and (020) planes are not equivalent!
(a0)2
![Page 19: Packing density](https://reader036.vdocuments.us/reader036/viewer/2022081720/55a3cf801a28ab140d8b47f0/html5/thumbnails/19.jpg)
In-Class Exercise 1: Determine planar
density and packing fraction.
Determine the planar density and packing fraction for FCC nickel in the (100), (110), and (111) planes. Which, if any, of these planes is close-packed?
Remember when
visualizing the plane, only
count the atoms that the
plane passes through the
center of the atom. If the
plane does NOT pass
through the center of that
atom, we do not count it!
![Page 20: Packing density](https://reader036.vdocuments.us/reader036/viewer/2022081720/55a3cf801a28ab140d8b47f0/html5/thumbnails/20.jpg)
First, find atomic radius for Nickel from Appendix 2, page 797 of
Textbook (6th Ed. Shackleford) to calculate the lattice parameter:
Solution for plane (100)
536.33536.02
125.04
2
4
125.0
0 nmnmr
FCCa
nmrNi
a0 For (100):
7854.0
2/4
2_
/10600.110536.3
2_
2
2
215
28
r
rfractionpacking
cmatomscm
atomsdensityplanar
![Page 21: Packing density](https://reader036.vdocuments.us/reader036/viewer/2022081720/55a3cf801a28ab140d8b47f0/html5/thumbnails/21.jpg)
Solution for plane (110)
5554.0
2/42
2_
/10131.110536.32
2_
2
2
215
28
r
rfractionpacking
cmatomscm
atomsdensityplanar
For (110):
a0
02a
It is important to visualize how the plane is cutting
across the unit cell – as shown in the diagram!
![Page 22: Packing density](https://reader036.vdocuments.us/reader036/viewer/2022081720/55a3cf801a28ab140d8b47f0/html5/thumbnails/22.jpg)
Solution for plane (111)
02a
02a
For (111):
Again try to visualize the plane, count the number of
atoms in the plane:
02a
2
000 866.02
32
2
1
2
1_ aaabhareaplane
215
28/10847.1
10536.3866.0
2_ cmatoms
cm
atomsdensityplanar
9069.0
866.0
4/22_
2
0
2
0 a
afractionpacking
Therefore, plane (111) is close-packed!
![Page 23: Packing density](https://reader036.vdocuments.us/reader036/viewer/2022081720/55a3cf801a28ab140d8b47f0/html5/thumbnails/23.jpg)
In-Class Exercise 2: Determine planar
density and packing fraction.
Determine the planar density and packing fraction for BCC lithium in the (100), (110), and the (111) planes. Which, if any, of these planes is close packed?
![Page 24: Packing density](https://reader036.vdocuments.us/reader036/viewer/2022081720/55a3cf801a28ab140d8b47f0/html5/thumbnails/24.jpg)
Solution for plane (100)
510.33510.03
152.04
3
4
152.0
0 nmnmr
BCCa
nmrLi
First, find atomic radius for Nickel from Appendix 2, page 797 of
Textbook (6th Ed. Shackleford) to calculate the lattice parameter:
For (100):
5890.0
4/3_
/10115.810510.3
1_
2
0
2
0
214
28
a
afractionpacking
cmatomscm
atomdensityplanar
![Page 25: Packing density](https://reader036.vdocuments.us/reader036/viewer/2022081720/55a3cf801a28ab140d8b47f0/html5/thumbnails/25.jpg)
Solution for plane (110)For (110):
It is important to visualize how the plane is cutting
across the unit cell – as shown in the diagram!
8330.0
2
4/32_
/10148.110510.32
2_
2
0
2
0
215
28
a
afractionpacking
cmatomscm
atomsdensityplanar
![Page 26: Packing density](https://reader036.vdocuments.us/reader036/viewer/2022081720/55a3cf801a28ab140d8b47f0/html5/thumbnails/26.jpg)
Solution for plane (111)
02a
For (111):
Note: Since the (111) does NOT pass through the
center of the atom in the middle of the BCC unit cell,
we do not count it!
2
000 866.02
33
2
1
2
1_ aaabhareaplane
214
28/10686.4
10510.3866.0
2/1_ cmatoms
cm
atomdensityplanar
3401.0
866.0
4/32/1_
2
0
2
0 a
afractionpacking
Therefore, there is no close-pack plane in BCC!
There are only (3)(1/6)=1/2 atoms in the plane.
02a
![Page 27: Packing density](https://reader036.vdocuments.us/reader036/viewer/2022081720/55a3cf801a28ab140d8b47f0/html5/thumbnails/27.jpg)
X-Ray Diffraction (XRD)
Max von Laue (1879-1960) won the Nobel Prize in 1912 for his discovery related to the diffraction of x-rays by a crystal.
William Henry Bragg (1862-1942) and his son William Lawrence Bragg (1890-1971) won the 1915 Nobel Prize for their contributions to XRD.
Diffraction – The constructive interference, or reinforcement, of a beam of x-rays or electrons interacting with a material. The diffracted beam provides useful information concerning the structure of the material.
Used widely as an equipment to determine crystal structures of various materials.
![Page 28: Packing density](https://reader036.vdocuments.us/reader036/viewer/2022081720/55a3cf801a28ab140d8b47f0/html5/thumbnails/28.jpg)
(c) 20
03
Bro
ok
s/Cole P
ub
lishin
g / T
hom
son
Learn
ing
(a)Destructive (out of phase) x-ray beam gives a weak signal.
(b)Reinforcing (in phase) interactions between x-rays and the crystalline material. Reinforcement occurs at angles that satisfy Bragg’s law.
![Page 29: Packing density](https://reader036.vdocuments.us/reader036/viewer/2022081720/55a3cf801a28ab140d8b47f0/html5/thumbnails/29.jpg)
Bragg’s Law:
sin2 hkldn
Bragg’s Law:
222
0
lkh
adhkl
Interplanar
spacing:d
Miller Indices
Where is half the angle
between the diffracted
beam and the original
beam direction
is the wavelength of X-ray
d is the interplanar spacing
![Page 30: Packing density](https://reader036.vdocuments.us/reader036/viewer/2022081720/55a3cf801a28ab140d8b47f0/html5/thumbnails/30.jpg)
Interplanar spacing (d-spacing)
The distance between two adjacent parallel planes of atoms with the same Miller Indices (dhkl).
The interplanar spacing in cubic materials is given by the general equation:
where a0 is the lattice parameter and h,k and lrepresent the Miller Indices of the adjacent planes being considered.
222
0
lkh
adhkl
![Page 31: Packing density](https://reader036.vdocuments.us/reader036/viewer/2022081720/55a3cf801a28ab140d8b47f0/html5/thumbnails/31.jpg)
(c) 20
03
Bro
ok
s/Cole P
ub
lishin
g / T
hom
son
Learn
ing
(a) Diagram of a diffractometer, showing powder sample, incident and diffracted beams. (b) The diffraction pattern obtained from a sample of gold powder.
![Page 32: Packing density](https://reader036.vdocuments.us/reader036/viewer/2022081720/55a3cf801a28ab140d8b47f0/html5/thumbnails/32.jpg)
The results of a x-ray diffraction experiment using x-
rays with λ = 0.7107 Å (a radiation obtained from
molybdenum (Mo) target) show that diffracted peaks occur at the following 2θ angles:
Example: Examining X-ray Diffraction
Determine the crystal structure, the indices of the plane producing each peak, and the lattice parameter of the material.
![Page 33: Packing density](https://reader036.vdocuments.us/reader036/viewer/2022081720/55a3cf801a28ab140d8b47f0/html5/thumbnails/33.jpg)
EXAMPLE SOLUTION
We can first determine the sin2 θ value for each peak,
then divide through by the lowest denominator, 0.0308.
![Page 34: Packing density](https://reader036.vdocuments.us/reader036/viewer/2022081720/55a3cf801a28ab140d8b47f0/html5/thumbnails/34.jpg)
EXAMPLE SOLUTION (Continued)
We could then use 2θ values for any of the peaks to calculate the interplanar spacing and thus the lattice parameter. Picking peak 8:
2θ = 59.42 or θ = 29.71
Å
Å868.2)4)(71699.0(
71699.0)71.29sin(2
7107.0
sin2
2224000
400
lkhda
d
This is the lattice parameter for body-centered cubic iron.
![Page 35: Packing density](https://reader036.vdocuments.us/reader036/viewer/2022081720/55a3cf801a28ab140d8b47f0/html5/thumbnails/35.jpg)
In-Class Exercise 3: Repeat Distance
In a FCC unit cell, how many d111 are present
between the 0,0,0 point and 1,1,1 point?
03a0
2 2 2hkl
ad
h k l
The distance between the 0,0,0 and 1,1,1 point is:
Answer:
The interplanar spacing is:
3111
0
222
0111
aad
Now, the number of interplanar spacings (d111) between the
specified points are:
![Page 36: Packing density](https://reader036.vdocuments.us/reader036/viewer/2022081720/55a3cf801a28ab140d8b47f0/html5/thumbnails/36.jpg)
End of Tutorial 2