Public Procurement for Innovative solutions (PPI) on

Cooperative Intelligent Transport Systems

ISO / TC 204 OVERVIEW

Christophe Feltus

1

Veronna, Italy June 11th-12th, 2014

ISO Focus Volume 5, No. 9, September 2008, ISSN 1729-8709

6/11/2014 P4ITS Standardization and Public

Procurement 2

Knut Blind, Stephan Gauch, Research and standardisation in

nanotechnology: evidence from Germany, The Journal of Technology

Transfer, June 2009, Volume 34, Issue 3, pp 320-342

Functions of standard

Procurement

6/11/2014 P4ITS Standardization and Public

Procurement 3

Is there standards in the field of ITS to

could support public procurement ?

Yes: ISO TC 204

SCOPE : Standardization of information, communication and control systems in the field of urban and rural surface transportation:

Integrating vehicles with roadway networks through the use of on-board wireless communications ;

Conversion of vehicle and infrastructure data to provide timely location based services to drivers and roadway operators ;

To improve advanced safety applications such as automatic crash notification, secure freight transport and crash avoidance ;

An improved environment through reduced fuel consumption

6/11/2014 P4ITS Standardization and Public

Procurement 4

ITS standard committee: ISO / TC 204

Number of published ISO standards under the direct responsibility of

ISO/TC 204 (number includes updates): 180

6/11/2014 P4ITS Standardization and Public

Procurement 5

ITS standard committee: ISO / TC 204

Example of standards

12/06/2014 7

ISO 14825:2011 Intelligent transport

systems - Geographic Data Files

ISO 14825:2011 specifies the conceptual and logical data model and physical encoding formats for geographic databases for Intelligent Transport Systems (ITS) applications and services. It includes a specification of potential contents of such databases (data dictionaries for Features, Attributes and Relationships), a specification of how these contents shall be represented, and of how relevant information about the database itself can be specified (metadata).

The focus of ISO 14825:2011 is on ITS applications and services and it emphasizes road and road-related information. ITS applications and services, however, also require information in addition to road and road-related information.

Typical ITS applications and services targeted by ISO 14825:2011 are in-vehicle or portable navigation systems, traffic management centres, or services linked with road management systems, including the public transport system

Status: Published - 1231 pages.

6/11/2014 P4ITS Standardization and Public

Procurement 8

ISO 14816:2005 Road transport and

traffic telematics - Automatic vehicle and

equipment identification - Numbering and

data structure

ISO 14816:2005 establishes a common framework data structure for unambiguous identification in RTTT/ITS systems. It excludes any physical aspects such as interfaces. It is neither frequency- nor air interface protocol-specific.

Data elements that form part of transmission or storage protocols such as headers, frame markers and checksums are thus excluded.

The specifications for protecting against changes, classifying and qualifying security aspects of the data structure elements are not included within ISO 14816:2005.

Status: Published - 35 pages.

6/11/2014

P4ITS Standardization and Public Procurement

9

ISO 14813-1:2007 Intelligent transport

systems - Reference model

architecture(s) for the ITS

ISO 14813-1:2007 provides a definition of the primary services and application

areas that can be provided to Intelligent Transport System (ITS) Users.

Those with a common purpose can be collected together in ITS service

domains, and within these there can be a number of ITS service groups for

particular parts of the domain. ISO 14813-1:2007 identifies 11 service

domains, within which numerous groups are then defined. Within this

framework, there are varying levels of detail related to definition of

different services. These details differ from nation to nation, depending on

whether the specific national architecture building blocks are based

directly upon services or on groups of functions. Thus, the intent is to

address groups of services and the respective domains within which they

fit. As these domains and service groups evolve over time, it is intended

that this International Standard be revised to include them.

Status: Published - 28 pages.

6/11/2014 P4ITS Standardization and Public

Procurement 10

ISO 14813-6:2009 Intelligent transport

systems - Reference model

architecture(s) for the ITS ISO 14813-6:2009 provides an 'enabling' structure for use in the ITS

sector. It provides a formal means to enact the ISO/TC 204 decision by resolution to use ASN.1 for data definitions within ITS International Standards. This provides a common message form to enable interoperability and reuse. It provides consistency of use so that where other aspects of ASN.1 (defined within ISO/IEC 8824 and ISO/IEC 8825), such as transfer rules, are selected to be used, they are used in a common and consistent way in order to maximize interoperability and reuse.

It is important to note that ISO 14813-6:2009 does not require the use of ASN.1 for anything other than providing a common and flexible form of data definition and this document makes specific provision for the support of use of other extant standardised syntax notations

Status: Published 15 pages.

6/11/2014 P4ITS Standardization and Public

Procurement 11

What next ?

Deeper analyse the portfolio of standards supported by TC 204

Investigate within the TC which standards are dedicated to certification

purpose

Be involved in standardization processes.

6/11/2014 P4ITS Standardization and Public

Procurement 12

Dr Christophe Feltus

Public Research Centre Henri Tudor,

Luxembourg-Kirchberg, Luxembourg

christophe.feltus@tudor.lu

13

Veronna, Italy June 11th-12th, 2014

Thank you !

Questions ?

References

6/11/2014 P4ITS Standardization and Public

Procurement 14

Knut Blind, Driving innovation, Standards and public procurement, ISO Focus Volume 5, No. 9, September

2008, ISSN 1729-8709

Knut Blind, Stephan Gauch, Research and standardisation in nanotechnology: evidence from Germany, The

Journal of Technology Transfer, June 2009, Volume 34, Issue 3, pp 320-342

William Johnson, Optimizing Transport Systems: The Role of ISO/TC204, Canadian Advisory Committee for

Standards Council of Canada ISO/TC204, ITS Canada Annual Conference, Quebec City, Quebec, June 18,

2012

Standardization of Intelligent Transport Systems, , ITS Standardization Activities of ISO/TC204, 2011.

Eoin OSullivan, Role of Standardisation in support of Emerging Technologies A Study for the Department of Business, Innovation & Skills (BIS) and the British Standards Institution (BSI)