p3000 universal clamp-on - rack warehouse...b177 s103 s101 s101 7. 3 use the allen tool for more...
TRANSCRIPT
1
PART# DESCRIPTION ENDCAPS SIDE SUPPORTS ITEM
SS-S101 3/8” SINGLE SLIDER (LENGTH 1”) 4 4
SS-S103 3/8” DOUBLE SLIDER 3” 4 4
SS-B165 5/16” X 1” COUNTERSUNK BOLT 4 4
SS-B177 3/8” X 3/4” COUNTERSUNK BOLT 8 8
SS-B117 5/16” X 1” BUTTON HEAD ALLEN BOLT ----- 8
N006 3/8” NYLON NUT 16 16
N015 5/16” KNOB SMALL 4 4
SS-W006 5/16” X 1/2” WASHER ----- 8
SS-W008 5/16” X 3/4” WASHER 4 4
SS-W013 3/8” X 3/4” WASHER 16 16
P3000 CLAMP 8 8
ADJUSTABLE” UPRIGHT 4 4
ADAPTOR PLATE 4 4
P013 ANGLED BRACE 4 4
A286-65/72/84 65”/72”/84” A286 CROSS BAR 2 2
G112 2” X 12” GASKET 4 4
Z286 A286 ENDCAPS 4 -----
A03 A286 BORDER SUPPORT ----- 4
A20 ADJUSTABLE LADDER GUIDE 4 4
Allen KeyWrenchINSTRUCTION MANUALINSTRUCTION MANUAL
P3000 UNIVERSAL Clamp-On
Required Tools
Packaged by Date
IHI
NOT DRAWN TO SCALE
P3001 65” ENDCAPS [ ]P3002 72” ENDCAPS [ ]P3003 84” ENDCAPS [ ]
P3011 65” SIDES [ ]P3012 72” SIDES [ ]P3013 84” SIDES [ ]
BLACK [ ] WHITE [ ] SILVER [ ]
2
W013
S103
N006
S103
3.
4.
4. 5.
2.1.
-Repeat each step for all 4 mounts and 2 cross bars.
-Hand tighten only unless specified. Adjustment is needed for proper fitment.
Insert for later steps
Tightly Secure Bolts
6.
S103
G112
B177
S103
S101S101
7.
3
Use the allen tool for more leverage. Repeat for remaining corners.
W008
N005
-After adjusting the cross bar and uprights to align correctly and centered tightly secure all hardware.
Tighten both clamps till there is no movement. Repeat for all 4 corners
9.
8.
B117
W006
Z286
OR
11.
10.
OR
A20
4
Accessories | extruded Aluminum systems
Part # Description Color MSRP
A57 Adjustable Ladder Stopper 5-7” Black or White 35.00
AdjustAble lAdder stopper
Ì Adjustable 2pcs. ladder stopper prevents ladders from sliding forward.
Ì The bottom half of the stopper is galvanized and powder coated.
Ì The top is galvanized and rubber dipped for durability.
Ì The unit is bolted onto the bottom channels of the cross bar.
Part # Description Height Color MSRP
A64 Push to Secure 6-8” Black or White 69.00
push-2-secure
Ì Secure your ladder with the Vantech Push 2 Secure.
Ì System is bolted underneath cross bar. Holds ladder 6”-8” in height.
Ì Installs onto rear cross bar
Ì Works together with Ladder Stopper
Part # Height Bar Type Color MSRP
A20 5” A285, A286 Black Rubber 39.00 (pair)
A93 5” A270, A287, A613 Black Rubber 39.00 (pair)
AdjustAble Guides with eye hooks
Ì The adjustable guide slides inside the channels of the cross bar and locks into places with turn-knob
Ì Eyehook located on top for easy tie-down and bungee.
Ì 5” in height to secure item side to side.
rubber coAted side support
Ì Includes stainless steel mounting hardware.
Ì Built in Eyehook on each support
Part # Bar Type
Color MSRP
A08 A270 Black Rubber 15.00 pair
A04 A285 Black Rubber 17.00 pair
A03 A286 Black Rubber 19.00 pair
A04 A287 Black Rubber 17.00 pair
Part # Weight Capacity MSRP
A67 100 lb. 119.00(each)
eZ-Velcro strAp
Ì Strap a ladder with the EZ velcro straps.
Ì Holds up to a maximum of 75 lbs in combination with the ladder stopper or guide.
Ì Loops into cross bar.
Note: Currently does not fit 286 cross bars
Part # Height Bar Type Color MSRP
A69 10” All 75 lb. 18.00 (each)
4 pc. holder with strAps
Ì Holds Kayak, surfboards and canoes
Ì Adjustable rubber padding can conform to side or bottom of equipment
Part # Size Bar Type MSRP
A24 1”A285 A286
10.00 (pair)
A59 1.25”A285 A286
14.00 (pair)
A94 1”A270 A287 A613
10.00 (pair)
eyehook
Ì Eyehooks includes sliders to fasten into channel.
Ì Tighten eyehook to secure into place.
Part # Height Bar Type MSRP
A25 1.5” A285, A286
20.00 (pair)
A26 1.5” A270, A287, A613
20.00(pair)
AdjustAble eyehook Ì Eyehooks includes sliders to secure
into channel.
Ì Tighten knob to secure into place.
Part # Length Install Weight Capacity MSRP
A62 10’ Onto Eyehook 150 lbs 35.00 (each)
rAtchet tie-down
Ì The Vantech Ratchet tie-down attaches to eyehooks on the mounting uprights with 1/2” bolts.
Ì Sold as individuals
Part #Strap
LengthBar Type Weight Capacity MSRP
A61 7’ Channels 150 lbs 29.00 (each)
rAtchet tie-down
Ì Attach the Vantech Ratchet tie-down to the channels of the crossbar.
Ì Sold as individuals
Ì Adjustable along channels
Part # Bar Type MSRP
A47 Locking Key knob with key (sold in pairs) 39.00 (pair)
lockinG key knob
Ì Prevent theft of racks or equipment
Ì Fits all 3/8” threading on upright mounts
5
Vantech 6” conduit carrier. Ì Spring assist rear door for a water tight seal.
Ì Padlock tab for rear hatch door.
Ì Direct bolt-on system.
Ì Secures into channels of aluminum crossbars with sliders.
Ì Includes: Front cap, rear door, 2 “U” brackets and hardware.
Ì 6” PVC pipe not included.
Part # Description Bar Type MSRP
A34 6” Conduit Carrier (bolt on) All 89.00
Plastic Bar Guard
Ì 3/4" & 2" Plastic Bar Guards
Ì Adhesive on one side
Ì Extend life of crossbars.
Ì Prevents scratches on Cross Bars
Ì Can be cut to specific sizes
Ì Any excess can be cut to length
Ì Can be used on other surfaces
Part # Description Length MSRP
BG042 3/4” wide bar guards with self adhesive tape 42” 6.00
BG056 3/4” wide bar guards with self adhesive tape 56” 7.00
BG063 3/4” wide bar guards with self adhesive tape 63” 8.00
BG072 3/4” wide bar guards with self adhesive tape 72” 10.00
BG084 3/4” wide bar guards with self adhesive tape 84” 11.00
BG096 3/4” wide bar guards with self adhesive tape 96” 12.00
BG251 2” wide bar guards with self adhesive tape 51” 9.00
BG259 2” wide bar guards with self adhesive tape 59” 10.00
BG265 2” wide bar guards with self adhesive tape 65” 11.00
BG272 2” wide bar guards with self adhesive tape 72” 12.00
Part # Description Length MSRP
BG5483/4” wide non-slip rubber bar guards
(press in channels)48" 14.00
BG5653/4” wide non-slip rubber bar guards
(press in channels)65" 19.00
BG5723/4” wide non-slip rubber bar guards
(press in channels)72" 22.00
BG5843/4” wide non-slip rubber bar guards
(press in channels)84" 36.00
BG5963/4” wide non-slip rubber bar guards
(press in channels)96" 40.00
Part # Description Length MSRP
BG7481” wide rubber Cushion bar guards
(press in channels)48" 28.00
BG7651” wide rubber Cushion bar guards
(press in channels)65" 28.00
BG7721” wide rubber Cushion bar guards
(press in channels)72" 44.00
BG7841” wide rubber Cushion bar guards
(press in channels)84" 49.00
BG7961” wide rubber Cushion bar guards
(press in channels)96" 56.00
Surfaces without Channel
Surfaces with Channel
Surfaces with Channel
ruBBer Bar Guard
Ì Rubber Bar Guards
Ì Fits into channels of extruded aluminum bars
Ì Easy press-on design
Ì Can be cut to specific sizes
Ì Any excess can be cut to length
Ì minimize rattling sound
Ì Prevents scratches on Cross Bars
ruBBer Bar Guard cushion
Ì Rubber Bar Guards (Cushioned)
Ì Fits into channels of extruded aluminum cross bars.
Ì Function and install similar to normal rubber bar guard
Ì Additional air pocked for extra cushion
Ì Great for kayaks, boards, and other materials or equipment.
Part # Size Color MSRP
A108 3.75" Black 5.00
360°adjustaBle conVex Mirror (Adhesive bAck)
Ì Sticks onto side view mirror.
Ì Adhesive backing
Ì Convex Mirror to show more