p040-041 r04-05 [cs3]特徴 features 構造図 construction figure 識別 identification ssx10516...

33
Features ߏਤɹɹConstruction †gure Identi†cation SSX10516 LF UL VW-1ͷ೩ରԠɻʢΧςΰϦ AVLV2ʣ ઈԑମʹϑοૉथΛ༻ɻ 200ˆΛຬɻ ܘࡉԽΛݱɻ פɺ༉ༀɺʹ༏Ε·ɻ ༠ɺ༠ମଛখɺૹΞοϓΛཁΔ ؾճ࿏ʹదɻ Flame resisting : UL VW-1. ʢCategory AVLV2ʣ Fluoroplastics is used for the insulator. Heatresistant 200ˆ are satis†ed. Making to a minute diameter is achieved. It is excellent to heat, cold, oil, chemical, and solvents resistant. The permittivity and the dielectric substance loss are small, and it is the best for the electric circuit where the transmission speed improvement is required. ˔ ˔ ˔ ˔ ˔ ˔ ˔ ˔ ˔ ˔ ˔ ˔ FEPઈԑମ FEP insulation ثػࢠ෦ઢ༻ઢ Wiring inside equipment ಋମ copper stranded conductor ɾSSX10516ɹSSX10516 ɾSSX10516ɹSSX10516 ɾ ɾനɾɾԫɾ੨ɾɾY/G ˞Y/Gઢʹԫ৭ͷ3ຊຒ৭ଳʢ30ʙ50ˋʣͱͳΓ·ɻ ɾblack, white, red, yellow, blue, transparency, Y/G ˞Y/G indicates green core with yellow stripeʢ30ʙ50ˋʣ . ചඪ४ Standard sale length ʲSSX10516ʳ ʢ28AWGʙ26AWG500mʣ ʢ24AWGʙ22AWG300mʣ ʢ20AWGʙ16AWG200mʙʣ ʲSSX10516ʳ ʢ28AWGʙ26AWG are cut by 500mʣ ʢ24AWGʙ22AWG are cut by 300mʣ ʢ20AWGʙ16AWG are cut by more than 200mʣ ߏදɹɹConstruction table ڐAllowable ampacity ɾຊΧλϩάͷڐ༰த1ઃɺपғԹ30ˆͰ ͷͰɻ ɾपғԹɺઃঢ়گʹΑԼهͷਖ਼Λ Լ⁴ ɾThe allowable ampacity of this catalog is a value at one in the air construction and the ambient temperature 30ˆ. ɾPlease multiply the following correction coe⒏cient by the ambient temperature and the cable-laying conditions, etc. ˔ݮগʢपғԹͷ߹ʣʗAdjustment factorsʢat ambient temperatureʣ ˔ݮগʢଟઃͷ߹ʣʗAdjustment factorsʢfor multiple-line layingʣ ғ Թ Ambient temperature ʢˆʣ ݮAdjustment factors ғ Թ Ambient temperature ʢˆʣ ݮCorrection factors 30 1.00 140 0.59 40 0.97 150 0.54 50 0.94 160 0.49 60 0.91 170 0.42 70 0.87 180 0.34 80 0.84 190 0.24 90 0.80 100 0.77 110 0.73 120 0.69 130 0.64 No. of wires ݮAdjustment factors 2ʙ3 0.70 4 0.63 5ʙ6 0.56 7ʙ15 0.49 16ʙ40 0.43 61ʙ 0.34 41ʙ60 0.39 ઢ৺ No. of cores αΠζ Size ʢAWGʣ 1C 1C 1C 1C 1C 1C 1C 28ʢ0.08Ὼʣ 26ʢ0.14Ὼʣ 24ʢ0.22Ὼʣ 22ʢ0.37Ὼʣ 20ʢ0.56Ὼʣ 18ʢ0.86Ὼʣ 16ʢ1.34Ὼʣ ߏ Construction ʢຊ/mmʣ ಋɹମ Conductor FEPઈԑମ FEP insulation ؾElectrical Characteristics 7/0.127 7/0.16 7/0.203 7/0.26 7/0.32 19/0.24 19/0.3 ܘ֎Outside diameter ʢmmʣ 0.38 0.48 0.61 0.78 0.96 1.2 1.5 Thickness ʢmmʣ 0.2 0.2 0.2 0.2 0.2 0.25 0.25 ಋମ ߅Conductor resistance ʢЊ/km20ˆʣ 222 140 89.4 52.4 34.6 22.1 14.1 ઈԑ ߅Insulation resistance ʢMЊkm20ˆʣ 1000 1000 1000 1000 1000 1000 1000 ѹ Electrical strength ʢV/1min.ʣ 2000 2000 2000 2000 2000 2000 2000 ܘ֎Overall diameter approx ʢmmʣ Approx.weight ʢkg/kmʣ 0.78 0.88 1.01 1.18 1.36 1.7 2.0 2 3 4 5 8 11 16 ڐAllowable ampacity ʢAʣ 4 6 8 11 15 21 28 ɾSSX10516ɹSSX10516 ن RoHS ɹ Certi†cation ద߹ن Applicable standard ܗ ߸هO⒏cial symbol ఆѹ Voltage rating ఆԹ Temperature rating ಋɹɹମ Conductor Flame rating UL AWMʢ10516ʣ UL 758 UL STYLE 10516 600V 200ˆ UL 758 VW-1 RoHS ରԠ ʢULن༉डΓ·Μɻʣ (It is not received the attestation of oil resistant from UL.) ւ֎نέϒϧւ֎نέϒϧSSX10516 LFʢ چɿ αϯϨοΫε10516 LFʣ SSX10516 LFʢ چɿ αϯϨοΫε10516 LFʣ ʢ چɿαϯϨοΫε10516 LFʣ ˒˒˒˒˒ ༉ ˒˒˒˒˒ ϊΠζ ˒ ೩ ˒˒˒˒ ˒ ඇҠߦ ˒˒˒˒˒ Ҡಈಛ ˒ ˞ಛͱͳΓ·ɻ

Upload: others

Post on 19-Feb-2020

0 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: P040-041 R04-05 [CS3]特徴 Features 構造図 Construction figure 識別 Identification SSX10516 LF UL VW-1の難燃対応。(カテゴリ AVLV2) 絶縁体にフッ素樹脂を使用。

特徴 Features

構造図  Construction figure

識別 Identification

SSX10516 LF

UL VW-1の難燃対応。(カテゴリ AVLV2)

絶縁体にフッ素樹脂を使用。

耐熱200℃を満足。

細径化を実現。

耐熱耐寒性、耐油耐薬品性、耐溶剤性に優れています。

誘電率、誘電体損失が小さく、伝送速度アップを要する電気回路に最適。

Flame resisting : UL VW-1.(Category AVLV2)

Fluoroplastics is used for the insulator.

Heatresistant 200℃ are satisfied.

Making to a minute diameter is achieved.

It is excellent to heat, cold, oil, chemical, and solvents resistant.

The permittivity and the dielectric substance loss are small, and it is the best for the electric circuit where the transmission speed improvement is required.

FEP絶縁体FEP insulation

電子機器内部配線用電線 Wiring inside equipment

導体copper stranded conductor

・SSX10516 SSX10516

・SSX10516 SSX10516

・黒・白・赤・黄・青・透明・Y/G※Y/G線は緑地に黄色の3本埋込色帯(30~50%)となります。

・black, white, red, yellow, blue, transparency, Y/G※Y/G indicates green core with yellow stripe(30~50%).

販売標準長 Standard sale length【SSX10516】(28AWG~26AWGは条長500m)(24AWG~22AWGは条長300m)(20AWG~16AWGは条長200m~)

【SSX10516】(28AWG~26AWG are cut by 500m)(24AWG~22AWG are cut by 300m)(20AWG~16AWG are cut by more than 200m)

構造表  Construction table

許容電流 Allowable ampacity・本カタログの許容電流は空中1条布設、周囲温度30℃での値です。

・周囲温度、布設状況等によって下記の補正係数を乗じて下さい。

・The allowable ampacity of this catalog is a value at one in the air construction and the ambient temperature 30℃.

・Please multiply the following correction coefficient by the ambient temperature and the cable-laying conditions, etc.

●電流減少係数(周囲温度の場合)/Adjustment factors(at ambient temperature)

●電流減少係数(多条布設の場合)/Adjustment factors(for multiple-line laying)

周 囲 温 度 Ambient temperature(℃)電流減少係数 Adjustment factors周 囲 温 度 Ambient temperature(℃)電流減少係数 Correction factors

301.001400.59

400.971500.54

500.941600.49

600.911700.42

700.871800.34

800.841900.24

900.80

1000.77

1100.73

1200.69

1300.64

電 線 数 No. of wires 電流減少係数 Adjustment factors

2~30.70

40.63

5~60.56

7~150.49

16~400.43

61~0.34

41~600.39

線心数No. of cores サイズ

Size(AWG)

1C1C1C1C1C1C1C

28(0.08㎟)26(0.14㎟)24(0.22㎟)22(0.37㎟)20(0.56㎟)18(0.86㎟)16(1.34㎟)

構成Construction(本/mm)

導 体Conductor

FEP絶縁体FEP insulation

電気特性Electrical Characteristics

7/0.1277/0.167/0.2037/0.267/0.3219/0.2419/0.3

外径Outside diameter(mm)0.380.480.610.780.961.21.5

厚さThickness(mm)0.20.20.20.20.20.250.25

導体抵抗Conductor resistance(Ω/km20℃)

22214089.452.434.622.114.1

絶縁抵抗Insulation resistance(MΩkm20℃)1000100010001000100010001000

耐電圧Electrical strength(V/1min.)2000200020002000200020002000

外径Overall diameter 約approx(mm)

概算質量Approx.weight(kg/km)

0.780.881.011.181.361.72.0

234581116

許容電流Allowable ampacity(A)

46811152128

・SSX10516 SSX10516

対象規格

RoHS

認 証 Certification適合規格 Applicable standard形式記号 Official symbol定格電圧 Voltage rating定格温度 Temperature rating導  体 Conductor難 燃 性 Flame rating

UL AWM(10516)UL 758

UL STYLE 10516600V200℃UL 758VW-1

RoHS対応品

(UL規格耐油認証は受けておりません。)(It is not received the attestation of oil resistant from UL.)

海外規格ケーブル

海外規格ケーブル

SSX10516 LF(旧:サンレックス10516 LF)

SSX10516 LF(旧:サンレックス10516 LF)

(旧:サンレックス10516 LF)

耐 熱 性 ★★★★★耐 油 性 ★★★★★耐ノイズ性 ★難 燃 性 ★★★★柔 軟 性 ★非移行性 ★★★★★移動特性 ★※特性は目安となります。

Page 2: P040-041 R04-05 [CS3]特徴 Features 構造図 Construction figure 識別 Identification SSX10516 LF UL VW-1の難燃対応。(カテゴリ AVLV2) 絶縁体にフッ素樹脂を使用。

特徴

表面印字  Surface Marking

HRF-SB/20276PEF LF

UL VW-1の難燃対応。(カテゴリ AVLV2)

耐油耐熱柔軟性ビニルシース材を使用。

絶縁体に発泡ポリオレフィンを使用。

特性インピーダンスを100±10Ω(シングルエイド)、130±10Ω(ディファレンシャル)に制御。

SCSI規格等の高速インターフェイスに対応。

シース色はベージュとなります。

シングルエンドモード(Single-end Mode)不平衡系。

シングルエンドモードとは、対をなしている線心1本と共通のシグナルグランド(対の残りの1本、その他の対の1本、一括編組シールド)間で信号を伝送させるモードです。

ディファレンシャルモード(Differential Mode)平衡系

ディファレンシャルモードとは、対をなしている線心間に差動信号(+信号と-信号)にて伝送させるモードです。

Flame resisting : UL VW-1.(Category AVLV2)

Oil, heat resistant and flexible PVC sheath material is used.

The foamed polyolefin is used for the insulator. The impedance : 100±10Ω(single-end), 130±10Ω(differential).

For a high-speed interface of the SCSI standard.

The color of the sheath is beige.

Single-end mode.

Shingle-end Mode is a mode to transmit the signal between one twin core and common signal grandeur(one of the remainder of pair, one of other pairs, shield braid of batch).

Differential mode.

Differential mode is a mode which transmit the differential motion signal(plus signal and mimus signal)between twin core.

導体(すずめっき軟銅より線)Tinned annealed copperstranded conductors

構造表  Construction table

識別  Identification

電子機器配線用ケーブル Electronic equipment cable

すずめっき軟銅線編組Tinned annealed copper braid shieldテープ

Tape発泡ポリオレフィン絶縁体Foamed polyolefin insulation

耐油耐熱柔軟性PVCシース(ベージュ)Oil, heat resistant and flexible PVC sheath(beige)

4P

10P

1

5

6

7

10 2

8 4

9 3

1

2

4

3

許容電流

●電流減少係数(周囲温度の場合)/Adjustment factors(at ambient temperature)

301.00

400.89

500.77

600.63

700.45

80-

90-

100-

●識別表/Identification table対番

第1種線心第2種線心対番

第1種線心第2種線心対番

第1種線心第2種線心対番

第1種線心第2種線心

1黒茶11茶橙21赤青31黄緑

2黒赤12茶黄22赤紫32黄青

3黒橙13茶緑23赤灰33黄紫

4黒黄14茶青24赤白34黄灰

5黒緑15茶紫25橙黄

6黒青16茶灰26橙緑

7黒紫17茶白27橙青

8黒灰18赤橙28橙紫

9黒白19赤黄29橙灰

10茶赤20赤緑30橙白

○内数字は識別表の対番を示す。/Figures ○ indicate pair number inthe identification table.

TAIYO E67647   AWM 20276 80℃ 30V VW-1 LF

対 数No. of pairs サイズ

Size(AWG)

2P3P4P5P6P7P8P10P13P14P18P20P25P30P34P

30(0.05㎟)

構成Construction(本/mm)

導 体Conductor

発泡ポリオレフィン絶縁体foamed polyolefin insulation

電気特性Electrical Characteristics

7/0.10

外径Outside diameter(mm)

0.30

厚さThickness(mm)

0.21

導体抵抗Conductor resistance(Ω/km20℃)

375

絶縁抵抗Insulation resistance(MΩkm20℃)

100

耐電圧Electrical strength(V/1min.)

500

外径Outside diameter(mm)

概算質量Approx.weight(kg/km)

0.72

耐熱柔軟性ビニルシースHeat -resistant flexible- PVC sheath

厚さThickness(mm)

0.9

外径Overall diameter 約approx(mm)4.85.25.55.86.26.47.27.28.18.18.89.710.310.611.2

3030404350495560657085100110120135

許容電流Allowable ampacity(A)

1.00.80.70.60.60.60.60.50.50.40.40.40.40.30.3

Features

構造図  Construction figure

販売標準長 Standard sale length

●電流減少係数(多条布設の場合)/Adjustment factors(for multiple-line laying)

電 線 数 No. of cables電流減少係数 Adjustment factors

2~30.70

40.63

5~60.56

7~150.49

16~400.43

61~0.34

41~600.39

周 囲 温 度 Ambient temperature(℃)電流減少係数 Adjustment factors

Allowable ampacity・本カタログの許容電流は空中1条布設、周囲温度30℃での値です。

・周囲温度、布設状況等によって下記の補正係数を乗じて下さい。

・The allowable ampacity of this catalog is a value at one in the air construction and the ambient temperature 30℃.

・Please multiply the following correction coefficient by the ambient temperature and the cable-laying conditions, etc.

100m○は受注生産品となります。

100m○:Order production

○○○

表面印字

RoHS対応品

対象規格

RoHS

認 証 Certification適合規格 Applicable standard形式記号 Official symbol定格電圧 Voltage rating定格温度 Temperature rating導  体 Conductor難 燃 性 Flame rating

UL AWMUL 758

UL STYLE 2027630V80℃UL 758VW-1

HRF-SB/20276PEF LF

HRF-SB/20276PEF LF

海外規格ケーブル

海外規格ケーブル

耐 熱 性 ★★★耐 油 性 ★★★★★耐ノイズ性 ★★★★難 燃 性 ★★★★柔 軟 性 ★★非移行性 ★★★★★移動特性 ★※特性は目安となります。

Page 3: P040-041 R04-05 [CS3]特徴 Features 構造図 Construction figure 識別 Identification SSX10516 LF UL VW-1の難燃対応。(カテゴリ AVLV2) 絶縁体にフッ素樹脂を使用。

HP-SB/20276SR LF

UL VW-1の難燃対応。(カテゴリ AVLV2)

耐油耐熱柔軟性ビニルシース材を使用。

RS232C対応ケーブル

圧接タイプのハーフピッチコネクタに最適。

Flame resisting : UL VW-1.(Category AVLV2)

Oil, heat resistant and flexible PVC sheath material is used.

Cable for RS232C.

It is the best for the half pitch connector of the insulation displacement type.

導体(すずめっき軟銅より線)Tinned annealed copperstranded conductors

電子機器配線用ケーブル Electronic equipment cable

すずめっき軟銅線編組Tinned annealed copper braid shieldテープ

Tape半硬質ビニル絶縁体Semi-rigid PVC insulation

耐油耐熱柔軟性PVCシース(黒色)Oil, heat resistant and flexible PVC sheath(Black)

許容電流

TAIYO E67647   AWM 20276 80℃ VW-1 LF2P3P5P7P10P14P18P20P25P34P

28(0.08㎟)7/0.127 0.38 0.1 211 10 5000.58 0.9

4.24.65.15.65.86.47.27.58.18.8

2430384655708590105130

1.41.20.90.80.70.60.60.60.50.4

薄灰

薄灰

対番 絶縁体色31

32

33

34

35

薄灰

ドットマーク対番 絶縁体色16

17

18

19

20

21

22

23

24

25

26

27

28

29

30

薄灰

ドットマーク

(連続)(連続)(連続)(連続)(連続)(連続)(連続)(連続)(連続)(連続)

薄灰

薄灰

対番 絶縁体色1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

薄灰

ドットマーク

7P

10P

1

5

6

7

10 2

8 4

9 34

12

3

7

65

第1種心線

第2種心線

●識別表/Identification table

●対例

※短点は1mm、長点は2mm、間隔1mm、 ピッチ約12mm

 

※A short point is 1mm, the length point is 2mm, the interval is 1mm, and the pitch is about 12mm.

○内数字は識別表の対番を示す。/Figures ○ indicate pair number in the identification table.

黒色のドットマーク/Black dot mark

絶縁体の色は、第1、第2芯線とも同色とする。/In the color of the insulator, the 1stand 2nd wick line is the same color.

第1、第2芯線のドットマークの色は、黒、赤とする。/The color of the first kind and the 2nd kind of dot mark is a black and red.

赤色のドットマーク/Red dot mark

特徴 Features

表面印字  Surface Marking

構造図  Construction figure

識別  Identification

識別  Identification

構造表  Construction table

●電流減少係数(周囲温度の場合)/Adjustment factors(at ambient temperature)

301.00

400.89

500.77

600.63

700.45

80-

90-

100-

販売標準長 Standard sale length100m 100m●電流減少係数(多条布設の場合)/Adjustment factors(for multiple-line laying)

電 線 数 No. of cables電流減少係数 Adjustment factors

2~30.70

40.63

5~60.56

7~150.49

16~400.43

61~0.34

41~600.39

周 囲 温 度 Ambient temperature(℃)電流減少係数 Adjustment factors

対 数No. of pairs サイズ

Size(AWG)

構成Construction(本/mm)

導 体Conductor

半硬質ビニル絶縁体Semi-rigid PVC insulation

電気特性Electrical Characteristics

外径Outside diameter(mm)

厚さThickness(mm)

導体抵抗Conductor resistance(Ω/km20℃)

絶縁抵抗Insulation resistance(MΩkm20℃)

耐電圧Electrical strength(V/1min.)

外径Outside diameter(mm)

概算質量Approx.weight(kg/km)

耐油耐熱柔軟性ビニルシースOil, heat -resistant flexible- PVC sheath

厚さThickness(mm)

外径Overall diameter 約approx(mm)

許容電流Allowable ampacity(A)

Allowable ampacity・本カタログの許容電流は空中1条布設、周囲温度30℃での値です。

・周囲温度、布設状況等によって下記の補正係数を乗じて下さい。

・The allowable ampacity of this catalog is a value at one in the air construction and the ambient temperature 30℃.

・Please multiply the following correction coefficient by the ambient temperature and the cable-laying conditions, etc.

表面印字

RoHS対応品

対象規格

RoHS

認 証 Certification適合規格 Applicable standard形式記号 Official symbol定格電圧 Voltage rating定格温度 Temperature rating導  体 Conductor難 燃 性 Flame rating

UL AWMUL 758

UL STYLE 2027630V80℃UL 758VW-1

HP-SB/20276SR LF

HP-SB/20276SR LF

海外規格ケーブル

海外規格ケーブル

耐 熱 性 ★★★耐 油 性 ★★★★★耐ノイズ性 ★★★★難 燃 性 ★★★★柔 軟 性 ★★非移行性 ★★★★★移動特性 ★※特性は目安となります。

Page 4: P040-041 R04-05 [CS3]特徴 Features 構造図 Construction figure 識別 Identification SSX10516 LF UL VW-1の難燃対応。(カテゴリ AVLV2) 絶縁体にフッ素樹脂を使用。

特徴

HK/20276XL LF

UL VW-1、cUL FT1の難燃対応。(カテゴリ AVLV2、AVLV7)

耐油耐熱柔軟性ビニルシース材を使用。

粉塵の出にくい介在を使用。

RS485、RS422、RS232C対応ケーブル。

Flame resisting : UL VW-1, cUL FT1.(Category AVLV2, AVLV7)

Oil, heat resistant and flexible PVC sheath material is used.

Filler of which dust doesn't go out easily is used,

Cable for RS485, RS422, RS232C.

電子機器配線用ケーブルElectronic equipment cable

許容電流

架橋ポリエチレン絶縁体Cross-linked polyethylene insulation

E67647   AWM 20276 80℃ 30V VW-1 TAIYO    AWM ⅡA 80℃ 30V FT1 TAIYO LF

4P3C

10P

1

9

10

5

8 2

6 4

7 32

14

3

黄 青

●識別表/Identification table対番

第1種線心第2種線心対番

第1種線心第2種線心対番

第1種線心第2種線心

1青

11青

21青

2黄

12黄

22黄

3緑白13緑黒23緑橙

4赤

14赤

24赤

5紫

15紫

25紫

6青

16青

7黄

17黄

8緑茶18緑灰

9赤

19赤

10紫

20紫

1P2P3P4P5P6P7P8P10P12P15P18P20P25P1P2P3P4P5P6P7P8P10P12P15P18P20P25P1P2P3P4P5P6P7P8P10P12P15P18P20P25P

26(0.14㎟)

24(0.22㎟)

22(0.37㎟)

7/0.16

7/0.203

7/0.26

0.48

0.61

0.78

0.20

0.25

0.30

154

98.3

63.2

1000

1000

1000

500

500

500

0.88

1.11

1.38

0.9

1.0

0.9

1.0

0.9

1.0

1.4

3.74.55.05.45.86.36.37.27.27.98.79.410.311.04.15.25.86.36.87.37.38.58.59.610.611.212.413.34.76.06.87.48.08.78.710.410.411.612.813.515.816.9

152330333945475565759010512014019323947556065809011013015017020025445565759095120140165195230285340

2.21.71.41.21.21.01.00.900.900.750.750.660.660.603.72.92.42.12.01.71.71.51.51.21.21.11.11.04.53.42.92.52.42.02.01.81.81.51.51.31.31.2

3C3C3C

262422

7/0.167/0.2037/0.26

0.480.610.78

0.200.250.30

15498.363.2

100010001000

500500500

0.881.111.38

0.90.90.9

3.84.34.9

172230

1.93.23.9

○内数字は識別表の対番を示す。/Figures ○ indicate pair number in the identification table.

Features

表面印字  Surface Marking

構造図  Construction figure

識別  Identification

導体(すずめっき軟銅より線)Tinned annealed copperstranded conductors

テープTape

耐油耐熱柔軟性PVCシース(黒色)Oil, heat resistant and flexible PVC sheath(Black)

構造表  Construction table

●電流減少係数(周囲温度の場合)/Adjustment factors(at ambient temperature)

301.00

400.89

500.77

600.63

700.45

80-

90-

100-

販売標準長 Standard sale length100m(切断販売が可能なサイズもございます。詳細は窓口にお問い合わせ下さい。)

100m(There are sizes that can be the cutting sales, too. Please inquire of sales staff in detail.)

●電流減少係数(多条布設の場合)/Adjustment factors(for multiple-line laying)

電 線 数 No. of cables電流減少係数 Adjustment factors

2~30.70

40.63

5~60.56

7~150.49

16~400.43

61~0.34

41~600.39

周 囲 温 度 Ambient temperature(℃)電流減少係数 Adjustment factors

線心数No. of cores サイズSize

(AWG)構成

Construction(mm)

架橋PE絶縁体Cross-linked polyethylene insulation

電気特性Electrical Characteristics

外径Outside diameter(mm)

厚さThickness(mm)

導体抵抗Conductor resistance(Ω/km20℃)

絶縁抵抗Insulation resistance(MΩkm20℃)

耐電圧Electrical strength(V/1min.)

外径Outside diameter(mm)

概算質量Approx.weight(kg/km)

耐油耐熱柔軟性ビニルシースOil, heat -resistant flexible- PVC sheath

厚さThickness(mm)

外径Overall diameter 約approx(mm)

許容電流Allowable ampacity(A)

許容電流Allowable ampacity(A)

導 体Conductor

対 数No. of pairs サイズ

Size(AWG)

構成Construction(本/mm)

架橋PE絶縁体Cross-linked polyethylene insulation

電気特性Electrical Characteristics

外径Outside diameter(mm)

厚さThickness(mm)

導体抵抗Conductor resistance(Ω/km20℃)

絶縁抵抗Insulation resistance(MΩkm20℃)

耐電圧Electrical strength(V/1min.)

外径Outside diameter(mm)

概算質量Approx.weight(kg/km)

耐油耐熱柔軟性ビニルシースOil, heat -resistant flexible- PVC sheath

厚さThickness(mm)

外径Overall diameter 約approx(mm)

導 体Conductor

Allowable ampacity・本カタログの許容電流は空中1条布設、周囲温度30℃での値です。

・周囲温度、布設状況等によって下記の補正係数を乗じて下さい。

・The allowable ampacity of this catalog is a value at one in the air construction and the ambient temperature 30℃.

・Please multiply the following correction coefficient by the ambient temperature and the cable-laying conditions, etc.

表面印字

RoHS対応品

対象規格

RoHS

認 証 Certification適合規格 Applicable standard形式記号 Official symbol定格電圧 Voltage rating定格温度 Temperature rating導  体 Conductor難 燃 性 Flame rating

UL AWMUL 758

UL STYLE 2027630V80℃UL 758VW-1

cULCSA C22.2 No.210CSA AWM ⅡA

30V80℃

CSA C22.2 No.210FT1

HK/20276XL LF

HK/20276XL LF

海外規格ケーブル

海外規格ケーブル

多対ケーブル耐 熱 性 ★★★耐 油 性 ★★★★★耐ノイズ性 ★★難 燃 性 ★★★★柔 軟 性 ★★非移行性 ★★★★★移動特性 ★※特性は目安となります。

多心ケーブル耐 熱 性 ★★★耐 油 性 ★★★★★耐ノイズ性 ★難 燃 性 ★★★★柔 軟 性 ★★非移行性 ★★★★★移動特性 ★※特性は目安となります。

Page 5: P040-041 R04-05 [CS3]特徴 Features 構造図 Construction figure 識別 Identification SSX10516 LF UL VW-1の難燃対応。(カテゴリ AVLV2) 絶縁体にフッ素樹脂を使用。

特徴

HK-SB/20276XL LF

UL VW-1、cUL FT1の難燃対応。(カテゴリ AVLV2、AVLV7)

耐油耐熱柔軟性ビニルシース材を使用。

粉塵の出にくい介在を使用。

RS485、RS422、RS232C対応ケーブル。

ドレンワイヤー入り。

Flame resisting : UL VW-1, cUL FT1.(Category AVLV2, AVLV7)

Oil, heat resistant and flexible PVC sheath material is used.

Filler of which dust doesn't go out easily is used,

Cable for RS485, RS422, RS232C.

With drain wire.

導体(すずめっき軟銅より線)Tinned annealed copperstranded conductors

電子機器配線用ケーブルElectronic equipment cable

テープTape

耐油耐熱柔軟性PVCシース(黒色)Oil, heat resistant and flexible PVC sheath(Black)

架橋ポリエチレン絶縁体Cross-linked polyethylene insulation

E67647   AWM 20276 80℃ 30V VW-1 TAIYO    AWM ⅡA 80℃ 30V FT1 TAIYO LF

●識別表/Identification table

○内数字は識別表の対番を示す。/Figures ○ indicate pair number in the identification table.

すずめっき軟銅線編組Tinned annealed copper braid shield

対番第1種線心第2種線心対番

第1種線心第2種線心対番

第1種線心第2種線心

1青

11青

21青

2黄

12黄

22黄

3緑白13緑黒23緑橙

4赤

14赤

24赤

5紫

15紫

25紫

6青

16青

7黄

17黄

8緑茶18緑灰

9赤

19赤

10紫

20紫

4P3C

10P

1

9

10

5

8 2

6 4

7 32

14

3

黄 青

1P2P3P4P5P6P7P8P10P12P15P18P20P25P1P2P3P4P5P6P7P8P10P12P15P18P20P25P1P2P3P4P5P6P7P8P10P12P15P18P20P25P

4.35.15.66.06.46.96.97.87.88.59.510.111.011.74.75.86.46.97.47.97.99.39.310.311.311.913.214.15.36.67.68.08.69.59.511.111.112.313.614.316.617.7

2637455055657080851001201401551803148607075859011512514517019522526041658095105125135165185215255290355415

2.21.71.41.21.21.01.00.900.900.750.750.660.660.603.72.92.42.12.01.71.71.51.51.21.21.11.11.04.53.42.92.52.42.02.01.81.81.51.51.31.31.2

3C3C3C

262422

7/0.167/0.2037/0.26

0.480.610.78

0.200.250.30

15498.363.2

100010001000

500500500

0.881.111.38

0.90.90.9

4.34.95.5

283647

1.93.23.9

26(0.14㎟) 7/0.16 0.48 0.20

24(0.22㎟) 7/0.203 0.61 0.25 1.11

22(0.37㎟) 7/0.26 0.78 0.30 1.38

0.88

0.9

154 1000 500

98.3 1000 500

63.2 1000 500

0.9

1.0

1.0

0.9

1.0

1.4

Features

表面印字  Surface Marking

構造図  Construction figure

識別  Identification

許容電流

●電流減少係数(周囲温度の場合)/Adjustment factors(at ambient temperature)

301.00

400.89

500.77

600.63

700.45

80-

90-

100-

販売標準長 Standard sale length100m(切断販売が可能なサイズもございます。詳細は窓口にお問い合わせ下さい。)

100m(There are sizes that can be the cutting sales, too. Please inquire of sales staff in detail.)

●電流減少係数(多条布設の場合)/Adjustment factors(for multiple-line laying)

電 線 数 No. of cables電流減少係数 Adjustment factors

2~30.70

40.63

5~60.56

7~150.49

16~400.43

61~0.34

41~600.39

周 囲 温 度 Ambient temperature(℃)電流減少係数 Adjustment factors

線心数No. of cores サイズSize

(AWG)構成

Construction(本/mm)

架橋PE絶縁体Cross-linked polyethylene insulation

電気特性Electrical Characteristics

外径Outside diameter(mm)

厚さThickness(mm)

導体抵抗Conductor resistance(Ω/km20℃)

絶縁抵抗Insulation resistance(MΩkm20℃)

耐電圧Electrical strength(V/1min.)

外径Outside diameter(mm)

概算質量Approx.weight(kg/km)

耐油耐熱柔軟性ビニルシースOil, heat -resistant flexible- PVC sheath

厚さThickness(mm)

外径Overall diameter

約approx(mm)

許容電流Allowable ampacity(A)

許容電流Allowable ampacity(A)

導 体Conductor

対 数No. of pairs サイズ

Size(AWG)

構成Construction(本/mm)

架橋PE絶縁体Cross-linked polyethylene insulation

電気特性Electrical Characteristics

外径Outside diameter(mm)

厚さThickness(mm)

導体抵抗Conductor resistance(Ω/km20℃)

絶縁抵抗Insulation resistance(MΩkm20℃)

耐電圧Electrical strength(V/1min.)

外径Outside diameter(mm)

概算質量Approx.weight(kg/km)

耐油耐熱柔軟性ビニルシースOil, heat -resistant flexible- PVC sheath

厚さThickness(mm)

外径Overall diameter

約approx(mm)

導 体Conductor

構造表  Construction table

Allowable ampacity・本カタログの許容電流は空中1条布設、周囲温度30℃での値です。

・周囲温度、布設状況等によって下記の補正係数を乗じて下さい。

・The allowable ampacity of this catalog is a value at one in the air construction and the ambient temperature 30℃.

・Please multiply the following correction coefficient by the ambient temperature and the cable-laying conditions, etc.

ドレンワイヤdrain wire

表面印字

RoHS対応品

対象規格

RoHS

認 証 Certification適合規格 Applicable standard形式記号 Official symbol定格電圧 Voltage rating定格温度 Temperature rating導  体 Conductor難 燃 性 Flame rating

UL AWMUL 758

UL STYLE 2027630V80℃UL 758VW-1

cULCSA C22.2 No.210CSA AWM ⅡA

30V80℃

CSA C22.2 No.210FT1

HK-SB/20276XL LF

HK-SB/20276XL LF

海外規格ケーブル

海外規格ケーブル

多対ケーブル耐 熱 性 ★★★耐 油 性 ★★★★★耐ノイズ性 ★★★★難 燃 性 ★★★★柔 軟 性 ★★非移行性 ★★★★★移動特性 ★※特性は目安となります。

多心ケーブル耐 熱 性 ★★★耐 油 性 ★★★★★耐ノイズ性 ★★★難 燃 性 ★★★★柔 軟 性 ★★非移行性 ★★★★★移動特性 ★※特性は目安となります。

Page 6: P040-041 R04-05 [CS3]特徴 Features 構造図 Construction figure 識別 Identification SSX10516 LF UL VW-1の難燃対応。(カテゴリ AVLV2) 絶縁体にフッ素樹脂を使用。

特徴 Features

表面印字  Surface Marking

構造図  Construction figure

識別  Identification

CL2/2464-3599-DS LF

UL VW-1、cUL FT1の難燃対応。(カテゴリ QPTZ、AVLV2、AVLV7)

UL垂直トレイ難燃試験に合格。

耐油耐熱柔軟性ビニルシース材を使用。

トレイケーブルとしても使用可能。

RS485、RS422、RS232C対応ケーブル。

リスティング規格であるCL2を取得しており、NFPA70,79に対応。

Flame resisting : UL VW-1, cUL FT1.(Category QPTZ, AVLV2, AVLV7)

It passes Vertical-Tray Flame Test of UL.

Oil, heat resistant and flexible PVC sheath material is used.

It is possible to use it as a tray cable.

Cable for RS485, RS422, RS232C.

CL2 that is the listing standard is acquired and it corresponds to NFPA70,79.

電子機器配線用ケーブル Electronic equipment cable

E242171(UL)CL2 75℃ □□AWG or AWM 2464 80℃ 300V VW-1 E67647    AWM ⅡA 80℃ 300V FT1 TAIYO LF

○内数字は識別表の対番を示す。/Figures ○ indicate pair number in the identification table.

3

4

2

1

4P 10P

3

1

2

7

10 4

8 6

9 5

●識別表/Identification table対番

第1種線心第2種線心対番

第1種線心第2種線心

1青青/白11青青/黒

2黄黄/白12黄黄/黒

3緑緑/白13緑緑/黒

4赤赤/白14赤赤/黒

5紫紫/白15紫紫/黒

6青青/茶

7黄黄/茶

8緑緑/茶

9赤赤/茶

10紫紫/茶

1P2P3P4P5P7P10P15P1P2P3P4P5P7P10P15P1P2P3P4P5P7P10P15P1P2P3P5P10P1P2P3P

5.16.77.17.78.38.910.312.55.77.68.18.89.510.312.015.76.28.59.110.010.811.713.817.97.510.811.614.018.98.612.513.6

355565758510014018543758510512014519530550901101351551852604007514017025046095185235

3.72.92.42.12.01.71.51.24.53.42.92.52.42.01.81.56.04.63.93.43.22.72.42.010.58.16.85.64.212.79.88.3

白/黒は黒色絶縁体上に白色ラインを施します。/White/Black indicates black core with white stripe.

24(0.22㎟) 7/0.203 0.61 0.30 97.5 100 20001.2 1.0

22(0.37㎟) 7/0.26 0.78 0.35 57.5 100 20001.5 1.0

1.5

1.5

1.5

20(0.53㎟) 21/0.18 0.95 0.40 36.2 100 20001.8 1.0

18(0.89㎟) 35/0.18 1.2 0.60 22.8 100 20002.4 1.0

16(1.38㎟) 26/0.26 1.5 0.70 14.3 100 20002.9 1.0

対象規格

RoHS

認 証 Certification適合規格 Applicable standard形式記号 Official symbol定格電圧 Voltage rating定格温度 Temperature rating導  体 Conductor

難 燃 性 Flame rating

UL CL2UL 13CL2150V75℃UL 13

VW-1.Vertical-Tray Flame Test

UL AWMUL 758

UL STYLE 2464300V80℃UL 758VW-1

cUL AWMCSA C22.2 No.210CSA AWM ⅡA

300V80℃

CSA C22.2 No.210FT1

導体(すずめっき軟銅より線)Tinned annealed copperstranded conductors

アルミ化PETテープAl pet tape

耐油耐熱柔軟性PVCシース(黒色)Oil, heat resistant and flexible PVC sheath(Black)

架橋ポリエチレン絶縁体Cross-linked polyethylene insulation

すずめっき軟銅線編組Tinned annealed copper braid shield

許容電流

●電流減少係数(周囲温度の場合)/Adjustment factors(at ambient temperature)

301.00

400.89

500.77

600.63

700.45

80-

90-

100-

●電流減少係数(多条布設の場合)/Adjustment factors(for multiple-line laying)

電 線 数 No. of cables電流減少係数 Adjustment factors

2~30.70

40.63

5~60.56

7~150.49

16~400.43

61~0.34

41~600.39

周 囲 温 度 Ambient temperature(℃)電流減少係数 Adjustment factors

対 数No. of pairs サイズ

Size(AWG)

構成Construction(本/mm)

導 体Conductor

架橋PE絶縁体Cross-linked polyethylene insulation

電気特性Electrical Characteristics

外径Outside diameter(mm)

厚さThickness(mm)

導体抵抗Conductor resistance(Ω/km20℃)

絶縁抵抗Insulation resistance(MΩkm20℃)

耐電圧Electrical strength(V/1min.)

外径Outside diameter(mm)

概算質量Approx.weight(kg/km)

耐油耐熱柔軟性ビニルシースOil, heat -resistant flexible- PVC sheath

厚さThickness(mm)

外径Overall diameter 約approx(mm)

許容電流Allowable ampacity(A)

構造表  Construction table

Allowable ampacity・本カタログの許容電流は空中1条布設、周囲温度30℃での値です。

・周囲温度、布設状況等によって下記の補正係数を乗じて下さい。

・The allowable ampacity of this catalog is a value at one in the air construction and the ambient temperature 30℃.

・Please multiply the following correction coefficient by the ambient temperature and the cable-laying conditions, etc.

販売標準長 Standard sale length100m(切断販売が可能なサイズもございます。詳細は窓口にお問い合わせ下さい。)

100m(There are sizes that can be the cutting sales, too. Please inquire of sales staff in detail.)

表面印字

RoHS対応品

CL2/2464-3599-DS LF

CL2/2464-3599-DS LF

海外規格ケーブル

海外規格ケーブル

耐 熱 性 ★★★耐 油 性 ★★★★★耐ノイズ性 ★★★★★難 燃 性 ★★★★★柔 軟 性 ★★非移行性 ★★★★★移動特性 ★※特性は目安となります。

Page 7: P040-041 R04-05 [CS3]特徴 Features 構造図 Construction figure 識別 Identification SSX10516 LF UL VW-1の難燃対応。(カテゴリ AVLV2) 絶縁体にフッ素樹脂を使用。

特徴 Features

表面印字  Surface Marking

構造図  Construction figure

CMX/2464-1061/ⅡA LF

UL、cUL共用。(カテゴリー AVLV2, AVLV7, DUZX, DUZX7)

UL VW-1、cUL FT1の難燃対応。

耐油耐熱柔軟性ビニルシース材を使用。

リスティング規格であるCMXを取得しておりNFPA70,79に対応。

Standard UL, cUL.(Category AVLV2,AVLV7,DUZX,DUZX7)

Flame resisting : UL VW-1, cUL FT1.

Oil, heat resistant and flexible PVC sheath material is used.

CMX that is the listing standard is acquired and it corresponds to NFPA70,79.

電子機器配線用ケーブルElectronic equipment cable

半硬質ビニル絶縁体Semi-rigid PVC insulation

導体(すずめっき軟銅より線)Tinned annealed copperstranded conductors

テープTape

半硬質ビニル絶縁体Semi-rigid PVC insulation

耐油耐熱柔軟性PVCシース(黒色)Oil, heat resistant and flexible PVC sheath(Black)

第1種心線

第2種心線

●対例

○内数字は識別表1の線番を示す。/Figures ○ indicate core number in the identification table 1.

※短点は1mm、長点は2mm、間隔1mm、ピッチ約12mm 

※A short point is 1mm, the length point is 2mm, the interval is 1mm, and the pitch is about 12mm.

※短点は1mm、長点は2mm、間隔1mm、ピッチ約12mm 

○内数字は識別表2の対番を示す。/Figures ○ indicate pair number in the identification table 2.

※A short point is 1mm, the length point is 2mm, the interval is 1mm, and the pitch is about 12mm.

黒色のドットマーク/Black dot mark

赤色のドットマーク/Red dot mark

・多心ケーブル/Multi core cable

・多対ケーブル/Multi pair cable

2

1

2

1

3

2

14

3

4C

3C2C

・2C~4C

・多対ケーブル/Multi pair cable

対番12345678910

絶縁体色橙薄灰白黄桃橙薄灰白黄桃

ドットマーク

7P

10P

3

1

2

7

10 4

8 6

9 5

1

23

4

7

65

薄灰

薄灰

対番 絶縁体色16

17

18

19

20

21

22

23

24

25

26

27

28

29

30

薄灰

ドットマーク

(連続)(連続)(連続)(連続)(連続)(連続)(連続)(連続)(連続)(連続)

薄灰

薄灰

対番 絶縁体色1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

薄灰

ドットマーク

●識別表1/Identification table1

●識別表2/Identification table2

絶縁体の色は、第1、第2芯線とも同色とする。/The color of the insulator, the 1stand 2nd core is the same color.

第1、第2芯線のドットマークの色は、黒、赤とする。/The color of the first kind and the 2nd kind of dot mark is a black and red.

対象規格

RoHS

認 証 Certification適合規格 Applicable standard形式記号 Official symbol定格電圧 Voltage rating定格温度 Temperature rating導  体 Conductor難 燃 性 Flame rating

UL CMXUL 444CMX300V75℃UL 444VW-1

cUL CMHCSA C22.2 No.214

CMH300V75℃

CSA C22.2 No.214FT1

UL AWMUL 758

UL STYLE 2464300V80℃UL 758VW-1

cUL AWMCSA C22.2 No.210CSA AWM ⅡA

300V80℃

CSA C22.2 No.210FT1

導体(すずめっき軟銅より線)Tinned annealed copperstranded conductors

テープTape

耐油耐熱柔軟性PVCシース(黒色)Oil, heat resistant and flexible PVC sheath(Black)

識別  Identification

表面印字

表面印字

E176892(UL) CMX □□AWG 75℃ or AWM 2464 80℃ 300V VW-1 or c(UL)CMH □□AWG75℃ or    AWM ⅡA 80℃ 300V FT1 TAIYO LF

RoHS対応品

CMX/2464-1061/ⅡA LF

CMX/2464-1061/ⅡA LF

多対ケーブル耐 熱 性 ★★★耐 油 性 ★★★★★耐ノイズ性 ★★難 燃 性 ★★★★柔 軟 性 ★★★非移行性 ★★★★★移動特性 ★※特性は目安となります。

多心ケーブル耐 熱 性 ★★★耐 油 性 ★★★★★耐ノイズ性 ★難 燃 性 ★★★★柔 軟 性 ★★★非移行性 ★★★★★移動特性 ★※特性は目安となります。

Page 8: P040-041 R04-05 [CS3]特徴 Features 構造図 Construction figure 識別 Identification SSX10516 LF UL VW-1の難燃対応。(カテゴリ AVLV2) 絶縁体にフッ素樹脂を使用。

許容電流

1P2P3P4P5P6P7P8P10P12P15P18P20P25P30P3P4P5P6P7P8P10P12P15P18P20P25P30P

3.94.75.35.76.16.66.67.67.68.49.39.810.811.612.05.86.36.87.37.38.58.59.410.410.912.113.013.5

1627333944505560708510011513015518039475565708095110135155175210245

2.21.71.41.21.21.01.00.90.90.70.70.60.60.60.52.42.12.01.71.71.51.51.21.21.11.11.00.9

3C2C3C4C

26(0.14㎟)

24(0.22㎟)

7/0.16

7/0.203

0.48

0.61

0.26

0.27

146

97.5

10

10

2000

2000

1.00

1.15

0.9

0.9

4.14.24.44.7

19202328

1.93.73.22.9

26(0.14㎟) 7/0.16 0.48 0.26 146 10 20001.00 0.9

24(0.22㎟) 7/0.203 0.61 0.27 97.5 10 20001.15 0.9

構造表  Construction table

●電流減少係数(周囲温度の場合)/Adjustment factors(at ambient temperature)

301.00

400.89

500.77

600.63

700.45

80-

90-

100-

販売標準長 Standard sale length100m 100m

●電流減少係数(多条布設の場合)/Adjustment factors(for multiple-line laying)

電 線 数 No. of cables電流減少係数 Adjustment factors

2~30.70

40.63

5~60.56

7~150.49

16~400.43

61~0.34

41~600.39

周 囲 温 度 Ambient temperature(℃)電流減少係数 Adjustment factors

Allowable ampacity・本カタログの許容電流は空中1条布設、周囲温度30℃での値です。

・周囲温度、布設状況等によって下記の補正係数を乗じて下さい。

・The allowable ampacity of this catalog is a value at one in the air construction and the ambient temperature 30℃.

・Please multiply the following correction coefficient by the ambient temperature and the cable-laying conditions, etc.

線心数No. of cores サイズ

Size(AWG)

構成Construction(本/mm)

導 体Conductor

半硬質ビニル絶縁体Semi-rigid PVC insulation

電気特性Electrical Characteristics

外径Outside diameter(mm)

厚さThickness(mm)

導体抵抗Conductor resistance(Ω/km20℃)

絶縁抵抗Insulation resistance(MΩkm20℃)

耐電圧Electrical strength(V/1min.)

外径Outside diameter(mm)

概算質量Approx.weight(kg/km)

耐油耐熱柔軟性ビニルシースOil, heat -resistant flexible- PVC sheath

厚さThickness(mm)

外径Overall diameter 約approx(mm)

許容電流Allowable ampacity(A)

対 数No. of pairs サイズ

Size(AWG)

構成Construction(本/mm)

導 体Conductor

半硬質ビニル絶縁体Semi-rigid PVC insulation

電気特性Electrical Characteristics

外径Outside diameter(mm)

厚さThickness(mm)

導体抵抗Conductor resistance(Ω/km20℃)

絶縁抵抗Insulation resistance(MΩkm20℃)

耐電圧Electrical strength(V/1min.)

外径Outside diameter(mm)

概算質量Approx.weight(kg/km)

耐油耐熱柔軟性ビニルシースOil, heat -resistant flexible- PVC sheath

厚さThickness(mm)

外径Overall diameter 約approx(mm)

許容電流Allowable ampacity(A)

RoHS対応品CMX/2464-1061/ⅡA LF電子機器配線用ケーブル Electronic equipment cable

対象規格

RoHS

CMX/2464-1061/ⅡA LF

CMX/2464-1061/ⅡA LF

海外規格ケーブル

海外規格ケーブル

Page 9: P040-041 R04-05 [CS3]特徴 Features 構造図 Construction figure 識別 Identification SSX10516 LF UL VW-1の難燃対応。(カテゴリ AVLV2) 絶縁体にフッ素樹脂を使用。

CMX/2464-1007/ⅡA LF

UL、cUL共用。(カテゴリー AVLV2, AVLV7, DUZX, DUZX7)

UL VW-1、cUL FT1の難燃対応。

耐油耐熱柔軟性ビニルシース材を使用。

リスティング規格であるCMXを取得しておりNFPA70,79に対応。

Standard UL, cUL.(Category AVLV2,AVLV7,DUZX,DUZX7)

Flame resisting : UL VW-1, cUL FT1.

Oil, heat resistant and flexible PVC sheath material is used.

CMX that is the listing standard is acquired and it corresponds to NFPA70,79.

電子機器配線用ケーブル Electronic equipment cable

※短点は1mm、長点は2mm、間隔1mm、ピッチ約12mm 

○内数字は識別表の線番を示す。/Figures ○ indicate core number in the identification table.

※A short point is 1mm, the length point is 2mm, the interval is 1mm, and the pitch is about 12mm.

・2C~4C ・5心以上はナンバリング識別/5 or more is identified by numbering

(1)22、20AWGの場合/For 22 and 20AWG

(2)18、16AWGの場合(2、3、4心の20AWG含む)/For 18 and 16AWG(20AWG of 2, 3, and 4 cores contains it).

2

14

3

4C 10C

3

1

2

7

10 4

8 6

9 5

線番161718192021222324252627282930

絶縁体色橙薄灰白黄桃橙薄灰白黄桃橙薄灰白黄桃

ドットマーク線番123456789101112131415

絶縁体色橙薄灰白黄桃橙薄灰白黄桃橙薄灰白黄桃

ドットマーク

(連続)(連続)(連続)(連続)(連続)

●識別表/Identification table

1

3

2

4

5 3

2

46

7

81

5C8C

4E

3E

2C

Y/G

赤 白

黒Y/G

10C 20C

3

1

2

7

10 4

8 6

9 5

89

10

11

12

1314

20

19

18

17

1615

127

36

45

○内数字は黒色絶縁体上の白色ナンバリングを示す。/Figures in ○ indicate white numbering on black insulator.

※Y/G線は緑地に黄色の3本埋込色帯(30~50%)となります。/Y/G indicates green core with yellow stripe(30~50%).

耐熱PVC絶縁体Heat resistant PVC insulation

5

特徴 Features

構造図  Construction figure

識別  Identification

導体(すずめっき軟銅より線)Tinned annealed copperstranded conductors

テープTape

耐油耐熱柔軟性PVCシース(黒色)Oil, heat resistant and flexible PVC sheath(Black)

表面印字

表面印字  Surface Marking

E176892 (UL) CMX □□AWG 75℃ or AWM 2464 80℃ 300V VW-1 or c(UL)CMH □□AWG75℃ or    AWM ⅡA 80℃ 300V FT1 TAIYO LF

対象規格

RoHS

認 証 Certification適合規格 Applicable standard形式記号 Official symbol定格電圧 Voltage rating定格温度 Temperature rating導  体 Conductor難 燃 性 Flame rating

UL CMXUL 444CMX300V75℃UL 444VW-1

cUL CMHCSA C22.2 No.214

CMH300V75℃

CSA C22.2 No.214FT1

UL AWMUL 758

UL STYLE 2464300V80℃UL 758VW-1

cUL AWMCSA C22.2 No.210CSA AWM ⅡA

300V80℃

CSA C22.2 No.210FT1

RoHS対応品

56 57

CMX/2464-1007/ⅡA LF

CMX/2464-1007/ⅡA LF

海外規格ケーブル

海外規格ケーブル

耐 熱 性 ★★★耐 油 性 ★★★★★耐ノイズ性 ★難 燃 性 ★★★★柔 軟 性 ★★★非移行性 ★★★★★移動特性 ★※特性は目安となります。

Page 10: P040-041 R04-05 [CS3]特徴 Features 構造図 Construction figure 識別 Identification SSX10516 LF UL VW-1の難燃対応。(カテゴリ AVLV2) 絶縁体にフッ素樹脂を使用。

2C3C4C5C6C8C10C12C16C20C30C2C3C4C6C8C10C12C16C20C24C30C2C3E4E6C8C10C12C16C20C30C2C3E4E6C

5.55.76.26.67.18.28.89.110.011.012.95.86.16.67.78.99.69.910.912.013.314.16.46.77.28.59.810.611.012.113.416.87.07.48.09.5

31384655608090105130160225374655801001151351702102502955060751051401601852352954556585105140

4.53.93.43.12.92.52.42.01.81.81.56.05.24.63.93.43.22.72.42.42.02.010.59.18.16.86.05.64.74.24.23.512.711.09.88.3

22(0.34㎟) 17/0.16 0.76 0.46 57.5 10 20001.68 1.0

20(0.53㎟) 21/0.18 0.95 0.46 36.2 10 20001.87 1.0

18(0.89㎟) 35/0.18 1.2 0.46 22.8 10 20002.1 1.0

16(1.38㎟) 26/0.26 1.5 0.46 14.3 10 20002.5 1.0

1.5

許容電流構造表  Construction table

●電流減少係数(周囲温度の場合)/Adjustment factors(at ambient temperature)

301.00

400.89

500.77

600.63

700.45

80-

90-

100-

販売標準長 Standard sale length100m 100m

●電流減少係数(多条布設の場合)/Adjustment factors(for multiple-line laying)

電 線 数 No. of cables電流減少係数 Adjustment factors

2~30.70

40.63

5~60.56

7~150.49

16~400.43

61~0.34

41~600.39

周 囲 温 度 Ambient temperature(℃)電流減少係数 Adjustment factors

Allowable ampacity・本カタログの許容電流は空中1条布設、周囲温度30℃での値です。

・周囲温度、布設状況等によって下記の補正係数を乗じて下さい。

・The allowable ampacity of this catalog is a value at one in the air construction and the ambient temperature 30℃.

・Please multiply the following correction coefficient by the ambient temperature and the cable-laying conditions, etc.

線心数No. of cores サイズ

Size(AWG)

構成Construction(本/mm)

導 体Conductor

耐熱ビニル絶縁体Heat resistant PVC insulation

電気特性Electrical Characteristics

外径Outside diameter(mm)

厚さThickness(mm)

導体抵抗Conductor resistance(Ω/km20℃)

絶縁抵抗Insulation resistance(MΩkm20℃)

耐電圧Electrical strength(V/1min.)

外径Outside diameter(mm)

概算質量Approx.weight(kg/km)

耐油耐熱柔軟性ビニルシースOil, heat -resistant flexible- PVC sheath

厚さThickness(mm)

外径Overall diameter 約approx(mm)

許容電流Allowable ampacity(A)

RoHS対応品CMX/2464-1007/ⅡA LF電子機器配線用ケーブル Electronic equipment cable

対象規格

RoHS

CMX/2464-1007/ⅡA LF

CMX/2464-1007/ⅡA LF

海外規格ケーブル

海外規格ケーブル

Page 11: P040-041 R04-05 [CS3]特徴 Features 構造図 Construction figure 識別 Identification SSX10516 LF UL VW-1の難燃対応。(カテゴリ AVLV2) 絶縁体にフッ素樹脂を使用。

CMX/2464-1061/ⅡA-SB LF

UL、cUL共用。(カテゴリー AVLV2, AVLV7, DUZX, DUZX7)

UL VW-1、cUL FT1の難燃対応。

耐油耐熱柔軟性ビニルシース材を使用。

リスティング規格であるCMXを取得しておりNFPA70,79に対応。

Standard UL, cUL.(Category AVLV2,AVLV7,DUZX,DUZX7)

Flame resisting : UL VW-1, cUL FT1.

Oil, heat resistant and flexible PVC sheath material is used.

CMX that is the listing standard is acquired and it corresponds to NFPA70,79.

電子機器配線用ケーブルElectronic equipment cable

第1種心線

第2種心線

●対例 黒色のドットマーク/Black dot mark

赤色のドットマーク/Red dot mark

・2C~4C

・多対ケーブル/Multi pair cable

対番12345678910

絶縁体色橙薄灰白黄桃橙薄灰白黄桃

ドットマーク

7P

10P

3

1

2

7

10 4

8 6

9 5

1

23

4

7

65

薄灰

薄灰

対番 絶縁体色16

17

18

19

20

21

22

23

24

25

26

27

28

29

30

薄灰

ドットマーク

(連続)(連続)(連続)(連続)(連続)(連続)(連続)(連続)(連続)(連続)

薄灰

薄灰

対番 絶縁体色1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

薄灰

ドットマーク

●識別表1/Identification table1

●識別表2/Identification table2

絶縁体の色は、第1、第2芯線とも同色とする。/The color of the insulator, the 1stand 2nd core is the same color.

第1、第2芯線のドットマークの色は、黒、赤とする。/The color of the first kind and the 2nd kind of dot mark is a black and red.

特徴 Features

構造図  Construction figure

識別  Identification

導体(すずめっき軟銅より線)Tinned annealed copperstranded conductors

すずめっき軟銅線編組Tinned annealed copper braid shield

テープTape

半硬質ビニル絶縁体Semi-rigid PVC insulation

耐油耐熱柔軟性PVCシース(黒色)Oil, heat resistant and flexible PVC sheath(Black)

導体(すずめっき軟銅より線)Tinned annealed copperstranded conductors

すずめっき軟銅線編組Tinned annealed copper braid shield

テープTape

半硬質ビニル絶縁体Semi-rigid PVC insulation

耐油耐熱柔軟性PVCシース(黒色)Oil, heat resistant and flexible PVC sheath(Black)

・多心ケーブル/Multi core cable

・多対ケーブル/Multi pair cable

○内数字は識別表1の線番を示す。/Figures ○ indicate core number in the identification table 1.

※短点は1mm、長点は2mm、間隔1mm、ピッチ約12mm 

※A short point is 1mm, the length point is 2mm, the interval is 1mm, and the pitch is about 12mm.

2

1

2

1

3

2

14

3

4C

3C2C

※短点は1mm、長点は2mm、間隔1mm、ピッチ約12mm 

○内数字は識別表2の対番を示す。/Figures ○ indicate pair number in the identification table 2.

※A short point is 1mm, the length point is 2mm, the interval is 1mm, and the pitch is about 12mm.

表面印字

表面印字

表面印字  Surface Marking

E176892 (UL) CMX □□AWG 75℃ or AWM 2464 80℃ 300V VW-1 or c(UL)CMH □□AWG 75℃ or    AWM ⅡA 80℃ 300V FT1 TAIYO LF

対象規格

RoHS

認 証 Certification適合規格 Applicable standard形式記号 Official symbol定格電圧 Voltage rating定格温度 Temperature rating導  体 Conductor難 燃 性 Flame rating

UL CMXUL 444CMX300V75℃UL 444VW-1

cUL CMHCSA C22.2 No.214

CMH300V75℃

CSA C22.2 No.214FT1

UL AWMUL 758

UL STYLE 2464300V80℃UL 758VW-1

cUL AWMCSA C22.2 No.210CSA AWM ⅡA

300V80℃

CSA C22.2 No.210FT1

RoHS対応品

CMX/2464-1061/ⅡA-SB LF

CMX/2464-1061/ⅡA-SB LF

海外規格ケーブル

海外規格ケーブル

多対ケーブル耐 熱 性 ★★★耐 油 性 ★★★★★耐ノイズ性 ★★★★難 燃 性 ★★★★柔 軟 性 ★★★非移行性 ★★★★★移動特性 ★※特性は目安となります。

多心ケーブル耐 熱 性 ★★★耐 油 性 ★★★★★耐ノイズ性 ★★★難 燃 性 ★★★★柔 軟 性 ★★★非移行性 ★★★★★移動特性 ★※特性は目安となります。

Page 12: P040-041 R04-05 [CS3]特徴 Features 構造図 Construction figure 識別 Identification SSX10516 LF UL VW-1の難燃対応。(カテゴリ AVLV2) 絶縁体にフッ素樹脂を使用。

1P2P3P4P5P6P7P8P10P12P15P18P20P25P30P3P4P5P6P7P8P10P12P15P18P20P25P30P

4.55.35.96.36.77.27.28.28.29.010.010.511.512.312.86.46.97.47.97.99.19.110.111.111.612.913.814.3

2740485560707585951101351551702002355565759095110120145175200230270305

2.21.71.41.21.21.01.00.90.90.70.70.60.60.60.52.42.12.01.71.71.51.51.21.21.11.11.00.9

2C3C4C

24(0.22㎟) 7/0.203 0.61 0.27 97.5 10 20001.15 0.9

4.85.05.3

313541

3.73.22.9

26(0.14㎟) 7/0.16 0.48 0.26 146 10 20001.00 0.9

24(0.22㎟) 7/0.203 0.61 0.27 97.5 10 20001.15 0.9

許容電流構造表  Construction table

●電流減少係数(周囲温度の場合)/Adjustment factors(at ambient temperature)

301.00

400.89

500.77

600.63

700.45

80-

90-

100-

販売標準長 Standard sale length100m 100m

●電流減少係数(多条布設の場合)/Adjustment factors(for multiple-line laying)

電 線 数 No. of cables電流減少係数 Adjustment factors

2~30.70

40.63

5~60.56

7~150.49

16~400.43

61~0.34

41~600.39

周 囲 温 度 Ambient temperature(℃)電流減少係数 Adjustment factors

Allowable ampacity・本カタログの許容電流は空中1条布設、周囲温度30℃での値です。

・周囲温度、布設状況等によって下記の補正係数を乗じて下さい。

・The allowable ampacity of this catalog is a value at one in the air construction and the ambient temperature 30℃.

・Please multiply the following correction coefficient by the ambient temperature and the cable-laying conditions, etc.

線心数No. of cores サイズ

Size(AWG)

構成Construction(本/mm)

導 体Conductor

半硬質ビニル絶縁体Semi-rigid PVC insulation

電気特性Electrical Characteristics

外径Outside diameter(mm)

厚さThickness(mm)

導体抵抗Conductor resistance(Ω/km20℃)

絶縁抵抗Insulation resistance(MΩkm20℃)

耐電圧Electrical strength(V/1min.)

外径Outside diameter(mm)

概算質量Approx.weight(kg/km)

耐油耐熱柔軟性ビニルシースOil, heat -resistant flexible- PVC sheath

厚さThickness(mm)

外径Overall diameter 約approx(mm)

許容電流Allowable ampacity(A)

対 数No. of pairs サイズ

Size(AWG)

構成Construction(本/mm)

導 体Conductor

半硬質ビニル絶縁体Semi-rigid PVC insulation

電気特性Electrical Characteristics

外径Outside diameter(mm)

厚さThickness(mm)

導体抵抗Conductor resistance(Ω/km20℃)

絶縁抵抗Insulation resistance(MΩkm20℃)

耐電圧Electrical strength(V/1min.)

外径Outside diameter(mm)

概算質量Approx.weight(kg/km)

耐油耐熱柔軟性ビニルシースOil, heat -resistant flexible- PVC sheath

厚さThickness(mm)

外径Overall diameter 約approx(mm)

許容電流Allowable ampacity(A)

RoHS対応品CMX/2464-1061/ⅡA-SB LF電子機器配線用ケーブル Electronic equipment cable

対象規格

RoHS

CMX/2464-1061/ⅡA-SB LF

CMX/2464-1061/ⅡA-SB LF

海外規格ケーブル

海外規格ケーブル

Page 13: P040-041 R04-05 [CS3]特徴 Features 構造図 Construction figure 識別 Identification SSX10516 LF UL VW-1の難燃対応。(カテゴリ AVLV2) 絶縁体にフッ素樹脂を使用。

CMX/2464-1007/ⅡA-SB LF

UL、cUL共用。(カテゴリー AVLV2, AVLV7, DUZX, DUZX7)

UL VW-1、cUL FT1の難燃対応。

耐油耐熱柔軟性ビニルシース材を使用。

リスティング規格であるCMXを取得しておりNFPA70,79に対応。

Standard UL, cUL.(Category AVLV2,AVLV7,DUZX,DUZX7)

Flame resisting : UL VW-1, cUL FT1.

Oil, heat resistant and flexible PVC sheath material is used.

CMX that is the listing standard is acquired and it corresponds to NFPA70,79.

電子機器配線用ケーブルElectronic equipment cable

・多心ケーブル/Multi core cable

(1)22、20AWGの場合/For 22 and 20AWG

2

14

3

4C

10C

3

1

2

7

10 4

8 6

9 5

2

1

2

1

3

3C2C

○内数字は識別表1の線番を示す。/Figures ○ indicate core number in  the identification table 1.

・多対ケーブル/Multi pair cable

2

14

3

4P

10P

3

1

2

7

10 4

8 6

9 52

1

3

3P

○内数字は識別表2の対番を示す。/Figures ○ indicate pair number in  the identification table 2.

特徴 Features

構造図  Construction figure

識別  Identification

耐熱PVC絶縁体Heat resistant PVC insulation

導体(すずめっき軟銅より線)Tinned annealed copperstranded conductors

テープTape

耐油耐熱柔軟性PVCシース(黒色)Oil, heat resistant and flexible PVC sheath(Black)

すずめっき軟銅線編組Tinned annealed copper braid shield

線番161718192021222324252627282930

絶縁体色橙薄灰白黄桃橙薄灰白黄桃橙薄灰白黄桃

ドットマーク線番123456789101112131415

絶縁体色橙薄灰白黄桃橙薄灰白黄桃橙薄灰白黄桃

ドットマーク

(連続)(連続)(連続)(連続)(連続)

薄灰

薄灰

対番 絶縁体色16

17

18

19

20

21

22

23

24

25

26

27

28

29

30

薄灰

ドットマーク

(連続)(連続)(連続)(連続)(連続)(連続)(連続)(連続)(連続)(連続)

薄灰

薄灰

対番 絶縁体色1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

薄灰

ドットマーク

●識別表2/Identification table 2

●識別表1/Identification table 1

第1種心線

第2種心線

●対例

黒色のドットマーク/Black dot mark

赤色のドットマーク/Red dot mark

※短点は1mm、長点は2mm、間隔1mm、 ピッチ約12mm

※A short point is 1mm, the length point is 2mm, the interval is 1mm, and the pitch is about 12mm.

絶縁体の色は、第1、第2芯線とも同色とする。/The color of the insulator, the 1stand 2nd core is the same color.

第1、第2芯線のドットマークの色は、黒、赤とする。/The color of the first kind and the 2nd kind of dot mark is a black and red.

表面印字

表面印字  Surface Marking

E176892(UL) CMX □□AWG 75℃ or AWM 2464 80℃ 300V VW-1 or c(UL)CMH □□AWG75℃ or    AWM ⅡA 80℃ 300V FT1 TAIYO LF

対象規格

RoHS

認 証 Certification適合規格 Applicable standard形式記号 Official symbol定格電圧 Voltage rating定格温度 Temperature rating導  体 Conductor難 燃 性 Flame rating

UL CMXUL 444CMX300V75℃UL 444VW-1

cUL CMHCSA C22.2 No.214

CMH300V75℃

CSA C22.2 No.214FT1

UL AWMUL 758

UL STYLE 2464300V80℃UL 758VW-1

cUL AWMCSA C22.2 No.210CSA AWM ⅡA

300V80℃

CSA C22.2 No.210FT1

RoHS対応品

CMX/2464-1007/ⅡA-SB LF

CMX/2464-1007/ⅡA-SB LF

海外規格ケーブル

海外規格ケーブル

多対ケーブル耐 熱 性 ★★★耐 油 性 ★★★★★耐ノイズ性 ★★★★難 燃 性 ★★★★柔 軟 性 ★★★非移行性 ★★★★★移動特性 ★※特性は目安となります。

多心ケーブル耐 熱 性 ★★★耐 油 性 ★★★★★耐ノイズ性 ★★★難 燃 性 ★★★★柔 軟 性 ★★★非移行性 ★★★★★移動特性 ★※特性は目安となります。

Page 14: P040-041 R04-05 [CS3]特徴 Features 構造図 Construction figure 識別 Identification SSX10516 LF UL VW-1の難燃対応。(カテゴリ AVLV2) 絶縁体にフッ素樹脂を使用。

構造表  Construction table識別  Identification

2C3C4C2C3C4C6C8C10C12C16C20C30C2C3E4E6C10C20C30C2C3E4E6C

6.16.36.86.46.77.28.39.510.310.611.612.815.97.07.37.89.111.314.217.67.68.08.610.2

44506050607510013015016521026038565809513019535052085105125175

4.53.93.46.05.24.63.93.43.22.72.42.42.010.59.18.16.85.64.23.512.711.09.88.3

3P4P5P6P8P10P12P15P20P

8.49.19.910.712.412.413.916.318.8

95110130150185205250335420

2.92.52.42.01.81.81.51.51.3

22(0.34m㎡)17/0.16 0.76 0.46 57.5 10 20001.68 1.0

20(0.53m㎡)21/0.18 0.95 0.46 36.2 10 20001.87 1.0

18(0.89m㎡)35/0.18 1.2 0.46 22.8 10 20002.1 1.0

16(1.38m㎡)26/0.26 1.5 0.46 14.3 10 20002.4 1.0

22(0.34m㎡)17/0.16 0.76 0.46 57.5 10 20001.68

1.0

1.5

1.5

1.5

許容電流

●電流減少係数(周囲温度の場合)/Adjustment factors(at ambient temperature)

301.00

400.89

500.77

600.63

700.45

80-

90-

100-

販売標準長 Standard sale length100m 100m

●電流減少係数(多条布設の場合)/Adjustment factors(for multiple-line laying)

電 線 数 No. of cables電流減少係数 Adjustment factors

2~30.70

40.63

5~60.56

7~150.49

16~400.43

61~0.34

41~600.39

周 囲 温 度 Ambient temperature(℃)電流減少係数 Adjustment factors

Allowable ampacity・本カタログの許容電流は空中1条布設、周囲温度30℃での値です。

・周囲温度、布設状況等によって下記の補正係数を乗じて下さい。

・The allowable ampacity of this catalog is a value at one in the air construction and the ambient temperature 30℃.

・Please multiply the following correction coefficient by the ambient temperature and the cable-laying conditions, etc.

線心数No. of cores サイズ

Size(AWG)

構成Construction(本/mm)

耐熱ビニル絶縁体Heat resistant PVC insulation

電気特性Electrical Characteristics

外径Outside diameter(mm)

厚さThickness(mm)

導体抵抗Conductor resistance(Ω/km20℃)

絶縁抵抗Insulation resistance(MΩkm20℃)

耐電圧Electrical strength(V/1min.)

外径Outside diameter(mm)

概算質量Approx.weight(kg/km)

耐油耐熱柔軟性ビニルシースOil, heat -resistant flexible- PVC sheath

厚さThickness(mm)

外径Overall diameter 約approx(mm)

許容電流Allowable ampacity(A)

線心数No. of cores サイズ

Size(AWG)

構成Construction(本/mm)

耐熱ビニル絶縁体Heat resistant PVC insulation

電気特性Electrical Characteristics

外径Outside diameter(mm)

厚さThickness(mm)

導体抵抗Conductor resistance(Ω/km20℃)

絶縁抵抗Insulation resistance(MΩkm20℃)

耐電圧Electrical strength(V/1min.)

外径Outside diameter(mm)

概算質量Approx.weight(kg/km)

耐油耐熱柔軟性ビニルシースOil, heat -resistant flexible- PVC sheath

厚さThickness(mm)

外径Overall diameter 約approx(mm)

許容電流Allowable ampacity(A)

導 体Conductor

導 体Conductor・2C~4C

(2)18、16AWGの場合(2、3、4Cの20AWGも含む)/ (.GWA61 dna 81 roF 20AWG of 2, 3, 4C)

2C

・6C~

4E3E

Y/G 赤 白

黒Y/G

10C 20C

3

1

2

7

10 4

8 6

9 5

89

10

11

12

1314

20

19

18

17

1615

127

36

45

6C

12

3

6

54

○内数字は黒色絶縁体上の白色ナンバリングを示す。/Figures in ○ indicate white numbering on black insulator.

※Y/G線は緑地に黄色の3本埋込色帯(40~60%)となります。/Y/G indicates green core with yellow stripe(40~60%).

RoHS対応品

○は受注生産品となります。/○:Order production

CMX/2464-1007/ⅡA-SB LF電子機器配線用ケーブル Electronic equipment cable

対象規格

RoHS

CMX/2464-1007/ⅡA-SB LF

CMX/2464-1007/ⅡA-SB LF

Page 15: P040-041 R04-05 [CS3]特徴 Features 構造図 Construction figure 識別 Identification SSX10516 LF UL VW-1の難燃対応。(カテゴリ AVLV2) 絶縁体にフッ素樹脂を使用。

UE/2517(N) LF電子機器配線用ケーブル Electronic equipment cable

UL、cUL共用。(カテゴリ AVLV2、AVLV7)

UL VW-1、cUL FT1の難燃対応。

耐油耐熱柔軟性ビニルシース材を使用。

CEマーキング適合宣言製品(TUV認定品)。(TUV証明書No.J2150115)

・・・・

Standard UL, cUL.(Category AVLV2, AVLV7)

Flame resisting : UL VW-1, cUL FT1.

Oil, heat resistant and flexible PVC sheath material is used.

CE marking(TUV recognition product).(Certificate of TUV No.J2150115)

・・・・

E67647   AWM 2517 105℃ 300V VW-1 TAIYO    AWM ⅡA 105℃ 300V FT1 TAIYO   CE VV5 300/500V LF

12C

2

14

3

4C

2

1

3

4512

611

710

89

2C3C4C5C7C12C2C3C4C5C7C12C

7.57.98.69.411.213.87.98.49.19.912.114.9

6070851051352156580100120165260

7.56.55.85.34.63.411.29.78.77.96.95.1

20(0.53㎟) 21/0.18 0.95 0.85 36.2 10 20002.7

1.0

19(0.79㎟) 31/0.18 1.2 0.85 26.7 10 20002.9

1.0

1.21.4

1.31.1

RoHS

認 証 Certification

適合規格 Applicable standard

形式記号 Official symbol

定格電圧 Voltage rating定格温度 Temperature rating

導  体 Conductor

難 燃 性 Flame rating

UL AWM

UL 758

UL STYLE 2517

300V105℃

UL 758

VW-1

cUL AWM

CSA C22.2 No.210

CSA AWM ⅡA

300V105℃

CSA C22.2 No.210

FT1

TUV.CEマーキングHD21.13

(IEC60227-7)H05VV5-F

(60227 IEC 75)300/500V70℃

HD383 Class 5(IEC60228 Class 5) EN50264-2-1(IEC60332-1)

特徴 Features 構造表  Construction table

構造図  Construction figure

表面印字  Surface Marking

識別  Identification

耐熱PVC絶縁体Heat resistant PVC insulation

導体(すずめっき軟銅より線)Tinned annealed copperstranded conductors

テープTape

耐油耐熱柔軟性PVCシース(黒色)Oil, heat resistant and flexible PVC sheath(Black)

許容電流

●電流減少係数(周囲温度の場合)/Adjustment factors(at ambient temperature)

●電流減少係数(多条布設の場合)/Adjustment factors(for multiple-line laying)

電 線 数 No. of cables電流減少係数 Adjustment factors

2~30.70

40.63

5~60.56

7~150.49

16~400.43

61~0.34

41~600.39

Allowable ampacity・本カタログの許容電流は空中1条布設、周囲温度30℃での値です。

・周囲温度、布設状況等によって下記の補正係数を乗じて下さい。

・The allowable ampacity of this catalog is a value at one in the air construction and the ambient temperature 30℃.

・Please multiply the following correction coefficient by the ambient temperature and the cable-laying conditions, etc.

販売標準長 Standard sale length

線心数No. of cores サイズ

Size(AWG)

構成Construction(本/mm)

導 体Conductor

耐熱ビニル絶縁体Heat resistant PVC insulation

電気特性Electrical Characteristics

外径Outside diameter(mm)

厚さThickness(mm)

導体抵抗Conductor resistance(Ω/km20℃)

絶縁抵抗Insulation resistance(MΩkm20℃)

耐電圧Electrical strength(V/1min.)

外径Outside diameter(mm)

概算質量Approx.weight(kg/km)

耐油耐熱柔軟性ビニルシースOil, heat -resistant flexible- PVC sheath

厚さThickness(mm)

外径Overall diameter 約approx(mm)

許容電流Allowable ampacity(A)

301.00

400.93

500.86

600.77

700.68

800.58

900.45

1000.26

周 囲 温 度 Ambient temperature(℃)電流減少係数 Adjustment factors

○内数字は黒色絶縁体上の白色ナンバリングを示す。/Figures in ○ indicate white numbering on black insulator.

100m(切断販売が可能なサイズもございます。詳細は窓口にお問い合わせ下さい。)

100m(There are sizes that can be the cutting sales, too. Please inquire of sales staff in detail.)

表面印字

RoHS対応品

※上記UL、CSA規格の耐電圧試験の他に2000V/5分間の試験を実施しております。 ※The examination of 2000V/5 minute besides the withstand voltage test on above mentioned UL standard and the CSA standard is executed.

・・

対象規格

UE/2517(N) LF

UE/2517(N) LF

海外規格ケーブル

海外規格ケーブル

耐 熱 性 ★★★★★耐 油 性 ★★★★★耐ノイズ性 ★難 燃 性 ★★★★柔 軟 性 ★★★非移行性 ★★★★★移動特性 ★※特性は目安となります。

Page 16: P040-041 R04-05 [CS3]特徴 Features 構造図 Construction figure 識別 Identification SSX10516 LF UL VW-1の難燃対応。(カテゴリ AVLV2) 絶縁体にフッ素樹脂を使用。

UE/2517(N)[Y/G]LF電子機器配線用ケーブル Electronic equipment cable

UL、cUL共用。(カテゴリ AVLV2、AVLV7)

UL VW-1、cUL FT1の難燃対応。

耐油耐熱柔軟性ビニルシース材を使用。

CEマーキング適合宣言製品(TUV認定品)。(TUV証明書No.J2150115)・・

Standard UL, cUL.(Category AVLV2, AVLV7)

Flame resisting : UL VW-1, cUL FT1.

Oil, heat resistant and flexible PVC sheath material is used.

CE marking(TUV recognition product).(Certificate of TUV No.J2150115)

・・・・

E67647   AWM 2517 105℃ 300V VW-1 TAIYO    AWM ⅡA 105℃ 300V FT1 TAIYO   CE VV5 300/500V LF

13E4E

2

14

3

512

611

710

89

Y/G

2

1

3

Y/G

3E4E5E7E13E3E4E5E7E13E

20(0.53㎟)

19(0.79㎟)

21/0.18

31/0.18

0.95

1.2

0.85

0.85

36.2

26.7

10

10

2000

2000

2.7

2.9

1.0

1.11.4

1.0

1.21.4

7.98.69.411.214.78.49.19.912.115.6

708510513523580100120165280

6.55.85.34.63.49.78.77.96.95.1

※線心数表記“E”は、同等サイズの[Y/G]アース線入りとなります。 (例)3E×20AWG:2×20AWG+1×20AWG(アース)

※Core number mark “E” has the [Y/G] earth cable of an equal size.

特徴 Features 構造表  Construction table

構造図  Construction figure

表面印字  Surface Marking

識別  Identification

耐熱PVC絶縁体Heat resistant PVC insulation

導体(すずめっき軟銅より線)Tinned annealed copperstranded conductors

テープTape

耐油耐熱柔軟性PVCシース(黒色)Oil, heat resistant and flexible PVC sheath(Black)

100m(切断販売が可能なサイズもございます。詳細は窓口にお問い合わせ下さい。)

100m(There are sizes that can be the cutting sales, too. Please inquire of sales staff in detail.)

許容電流

●電流減少係数(周囲温度の場合)/Adjustment factors(at ambient temperature)

●電流減少係数(多条布設の場合)/Adjustment factors(for multiple-line laying)

電 線 数 No. of cables電流減少係数 Adjustment factors

2~30.70

40.63

5~60.56

7~150.49

16~400.43

61~0.34

41~600.39

Allowable ampacity・本カタログの許容電流は空中1条布設、周囲温度30℃での値です。

・周囲温度、布設状況等によって下記の補正係数を乗じて下さい。

・The allowable ampacity of this catalog is a value at one in the air construction and the ambient temperature 30℃.

・Please multiply the following correction coefficient by the ambient temperature and the cable-laying conditions, etc.

販売標準長 Standard sale length

線心数No. of cores サイズ

Size(AWG)

構成Construction(本/mm)

導 体Conductor

耐熱ビニル絶縁体Heat resistant PVC insulation

電気特性Electrical Characteristics

外径Outside diameter(mm)

厚さThickness(mm)

導体抵抗Conductor resistance(Ω/km20℃)

絶縁抵抗Insulation resistance(MΩkm20℃)

耐電圧Electrical strength(V/1min.)

外径Outside diameter(mm)

概算質量Approx.weight(kg/km)

耐油耐熱柔軟性ビニルシースOil, heat -resistant flexible- PVC sheath

厚さThickness(mm)

外径Overall diameter 約approx(mm)

許容電流Allowable ampacity(A)

301.00

400.93

500.86

600.77

700.68

800.58

900.45

1000.26

周 囲 温 度 Ambient temperature(℃)電流減少係数 Adjustment factors

○内数字は黒色絶縁体上の白色ナンバリングを示す。/Figures in ○ indicate white numbering on black insulator.

※Y/G線は緑地に黄色の3本埋込色帯(30~50%)となります。/Y/G indicates green core with yellow stripe(30~50%).

表面印字

RoHS対応品

※上記UL、CSA規格の耐電圧試験の他に2000V/5分間の試験 を実施しております。

※The examination of 2000V/5 minute besides the withstand voltage test on above mentioned UL standard and the CSA standard is executed.

RoHS

認 証 Certification

適合規格 Applicable standard

形式記号 Official symbol

定格電圧 Voltage rating定格温度 Temperature rating

導  体 Conductor

難 燃 性 Flame rating

UL AWM

UL 758

UL STYLE 2517

300V105℃

UL 758

VW-1

cUL AWM

CSA C22.2 No.210

CSA AWM ⅡA

300V105℃

CSA C22.2 No.210

FT1

TUV.CEマーキングHD21.13

(IEC60227-7)H05VV5-F

(60227 IEC 75)300/500V70℃

HD383 Class 5(IEC60228 Class 5) EN50264-2-1(IEC60332-1)

対象規格・・

UE/2517(N)[Y/G]LF

UE/2517(N)[Y/G]LF

海外規格ケーブル

海外規格ケーブル

耐 熱 性 ★★★★★耐 油 性 ★★★★★耐ノイズ性 ★難 燃 性 ★★★★柔 軟 性 ★★★非移行性 ★★★★★移動特性 ★※特性は目安となります。

Page 17: P040-041 R04-05 [CS3]特徴 Features 構造図 Construction figure 識別 Identification SSX10516 LF UL VW-1の難燃対応。(カテゴリ AVLV2) 絶縁体にフッ素樹脂を使用。

UE/2517-SB(N)LF電子機器配線用ケーブル Electronic equipment cable

E67647   AWM 2517 105℃ 300V VW-1 TAIYO    AWM ⅡA 105℃ 300V FT1 TAIYO CE VV5 LF

12C

2

14

3

4C

2

1

3

4512

611

710

89

2C3C4C5C7C12C2C3C4C5C7C12C

8.18.59.210.111.714.08.59.09.810.612.415.9

809511014017525590110130160200330

7.56.55.85.34.63.411.29.78.77.96.95.1

20(0.53㎟) 21/0.18 0.95 0.85 36.2 10 20002.7 1.0

19(0.79㎟) 31/0.18 1.2 0.85 26.7 10 20002.9 1.0

1.5

RoHS

認 証 Certification

適合規格 Applicable standard

形式記号 Official symbol

定格電圧 Voltage rating定格温度 Temperature rating

導  体 Conductor

難 燃 性 Flame rating

UL AWM

UL 758

UL STYLE 2517

300V105℃

UL 758

VW-1

cUL AWM

CSA C22.2 No.210

CSA AWM ⅡA

300V105℃

CSA C22.2 No.210

FT1

CEマーキングHD21.13

(IEC60227-7)H05VV5-F

(60227 IEC 75)300/500V70℃

HD383 Class 5(IEC60228 Class 5) EN50264-2-1(IEC60332-1)

対象規格

特徴 Features 構造表  Construction table

構造図  Construction figure

表面印字  Surface Marking

識別  Identification

耐熱PVC絶縁体Heat resistant PVC insulation

導体(すずめっき軟銅より線)Tinned annealed copperstranded conductors

テープTape

耐油耐熱柔軟性PVCシース(黒色)Oil, heat resistant and flexible PVC sheath(Black)

すずめっき軟銅線編組Tinned annealed copper braid shield

許容電流

●電流減少係数(周囲温度の場合)/Adjustment factors(at ambient temperature)

●電流減少係数(多条布設の場合)/Adjustment factors(for multiple-line laying)

電 線 数 No. of cables電流減少係数 Adjustment factors

2~30.70

40.63

5~60.56

7~150.49

16~400.43

61~0.34

41~600.39

Allowable ampacity・本カタログの許容電流は空中1条布設、周囲温度30℃での値です。

・周囲温度、布設状況等によって下記の補正係数を乗じて下さい。

・The allowable ampacity of this catalog is a value at one in the air construction and the ambient temperature 30℃.

・Please multiply the following correction coefficient by the ambient temperature and the cable-laying conditions, etc.

販売標準長 Standard sale length

線心数No. of cores サイズ

Size(AWG)

構成Construction(本/mm)

導 体Conductor

耐熱ビニル絶縁体Heat resistant PVC insulation

電気特性Electrical Characteristics

外径Outside diameter(mm)

厚さThickness(mm)

導体抵抗Conductor resistance(Ω/km20℃)

絶縁抵抗Insulation resistance(MΩkm20℃)

耐電圧Electrical strength(V/1min.)

外径Outside diameter(mm)

概算質量Approx.weight(kg/km)

耐油耐熱柔軟性ビニルシースOil, heat -resistant flexible- PVC sheath

厚さThickness(mm)

外径Overall diameter 約approx(mm)

許容電流Allowable ampacity(A)

301.00

400.93

500.86

600.77

700.68

800.58

900.45

1000.26

周 囲 温 度 Ambient temperature(℃)電流減少係数 Adjustment factors

○内数字は黒色絶縁体上の白色ナンバリングを示す。/Figures in ○ indicate white numbering on black insulator.

UL、cUL共用。(カテゴリ AVLV2、AVLV7)

UL VW-1、cUL FT1の難燃対応。

耐油耐熱柔軟性ビニルシース材を使用。

CEマーキング適合宣言製品。

Standard UL, cUL.(Category AVLV2, AVLV7)

Flame resisting : UL VW-1, cUL FT1.

Oil, heat resistant and flexible PVC sheath material is used.

CE marking.

100m(切断販売が可能なサイズもございます。詳細は窓口にお問い合わせ下さい。)

100m(There are sizes that can be the cutting sales, too. Please inquire of sales staff in detail.)

表面印字

RoHS対応品

※上記UL、CSA規格の耐電圧試験の他に2000V/5分間の試験 を実施しております。

※The examination of 2000V/5 minute besides the withstand voltage test on above mentioned UL standard and the CSA standard is executed.

UE/2517-SB(N)LF

UE/2517-SB(N)LF

海外規格ケーブル

海外規格ケーブル

耐 熱 性 ★★★★★耐 油 性 ★★★★★耐ノイズ性 ★★★難 燃 性 ★★★★柔 軟 性 ★★★非移行性 ★★★★★移動特性 ★※特性は目安となります。

Page 18: P040-041 R04-05 [CS3]特徴 Features 構造図 Construction figure 識別 Identification SSX10516 LF UL VW-1の難燃対応。(カテゴリ AVLV2) 絶縁体にフッ素樹脂を使用。

UE/2517-SB(N)[Y/G]LF電子機器配線用ケーブル Electronic equipment cable

E67647   AWM 2517 105℃ 300V VW-1 TAIYO    AWM ⅡA 105℃ 300V FT1 TAIYO CE VV5 LF

※線心数表記“E”は、同等サイズの[Y/G]アース線入りとなります。 (例)3E×20AWG:2×20AWG+1×20AWG(アース)

※Core number mark “E” has the [Y/G] earth cable of an equal size.

13E4E

2

14

3

512

611

710

89

Y/G

2

1

3

Y/G

3E4E5E7E13E3E4E5E7E13E

2000

2000

8.59.210.111.714.79.09.810.612.416.6

95110140175275110130160200350

7.56.55.84.93.411.29.78.77.35.1

20(0.53㎟) 21/0.18 0.95 0.85 36.2 102.7 1.0

19(0.79㎟) 31/0.18 1.2 0.85 26.7 102.9 1.0

1.5

RoHS

認 証 Certification

適合規格 Applicable standard

形式記号 Official symbol

定格電圧 Voltage rating定格温度 Temperature rating

導  体 Conductor

難 燃 性 Flame rating

UL AWM

UL 758

UL STYLE 2517

300V105℃

UL 758

VW-1

cUL AWM

CSA C22.2 No.210

CSA AWM ⅡA

300V105℃

CSA C22.2 No.210

FT1

CEマーキングHD21.13

(IEC60227-7)H05VV5-F

(60227 IEC 75)300/500V70℃

HD383 Class 5(IEC60228 Class 5) EN50264-2-1(IEC60332-1)

対象規格

特徴 Features 構造表  Construction table

構造図  Construction figure

表面印字  Surface Marking

識別  Identification

耐熱PVC絶縁体Heat resistant PVC insulation

導体(すずめっき軟銅より線)Tinned annealed copperstranded conductors

テープTape

耐油耐熱柔軟性PVCシース(黒色)Oil, heat resistant and flexible PVC sheath(Black)

すずめっき軟銅線編組Tinned annealed copper braid shield

許容電流

●電流減少係数(周囲温度の場合)/Adjustment factors(at ambient temperature)

●電流減少係数(多条布設の場合)/Adjustment factors(for multiple-line laying)

電 線 数 No. of cables電流減少係数 Adjustment factors

2~30.70

40.63

5~60.56

7~150.49

16~400.43

61~0.34

41~600.39

Allowable ampacity・本カタログの許容電流は空中1条布設、周囲温度30℃での値です。

・周囲温度、布設状況等によって下記の補正係数を乗じて下さい。

・The allowable ampacity of this catalog is a value at one in the air construction and the ambient temperature 30℃.

・Please multiply the following correction coefficient by the ambient temperature and the cable-laying conditions, etc.

販売標準長 Standard sale length100m(切断販売が可能なサイズもございます。詳細は窓口にお問い合わせ下さい。)

100m(There are sizes that can be the cutting sales, too. Please inquire of sales staff in detail.)

線心数No. of cores サイズ

Size(AWG)

構成Construction(本/mm)

導 体Conductor

耐熱ビニル絶縁体Heat resistant PVC insulation

電気特性Electrical Characteristics

外径Outside diameter(mm)

厚さThickness(mm)

導体抵抗Conductor resistance(Ω/km20℃)

絶縁抵抗Insulation resistance(MΩkm20℃)

耐電圧Electrical strength(V/1min.)

外径Outside diameter(mm)

概算質量Approx.weight(kg/km)

耐油耐熱柔軟性ビニルシースOil, heat -resistant flexible- PVC sheath

厚さThickness(mm)

外径Overall diameter 約approx(mm)

許容電流Allowable ampacity(A)

301.00

400.93

500.86

600.77

700.68

800.58

900.45

1000.26

周 囲 温 度 Ambient temperature(℃)電流減少係数 Adjustment factors

○内数字は黒色絶縁体上の白色ナンバリングを示す。/Figures in ○ indicate white numbering on black insulator.

※Y/G線は緑地に黄色の3本埋込色帯(30~50%)となります。/Y/G indicates green core with yellow stripe(30~50%).

UL、cUL共用。(カテゴリ AVLV2、AVLV7)

UL VW-1、cUL FT1の難燃対応。

耐油耐熱柔軟性ビニルシース材を使用。

CEマーキング適合宣言製品。

Standard UL, cUL.(Category AVLV2, AVLV7)

Flame resisting : UL VW-1, cUL FT1.

Oil, heat resistant and flexible PVC sheath material is used.

CE marking.

表面印字

RoHS対応品

※上記UL、CSA規格の耐電圧試験の他に2000V/5分間の試験 を実施しております。

※The examination of 2000V/5 minute besides the withstand voltage test on above mentioned UL standard and the CSA standard is executed.

UE/2517 SB(N)[Y/G]LF

UE/2517 SB(N)[Y/G]LF

海外規格ケーブル

海外規格ケーブル

耐 熱 性 ★★★★★耐 油 性 ★★★★★耐ノイズ性 ★★★難 燃 性 ★★★★柔 軟 性 ★★★非移行性 ★★★★★移動特性 ★※特性は目安となります。

Page 19: P040-041 R04-05 [CS3]特徴 Features 構造図 Construction figure 識別 Identification SSX10516 LF UL VW-1の難燃対応。(カテゴリ AVLV2) 絶縁体にフッ素樹脂を使用。

UE/2501(N)/TC LFケーブルトレイ、レースウェイ配線用、電子機器配線用ケーブルFor tray cable, race way and electronic equipment cable

※12AWG以上は軟銅より線/12AWG or more are stranded annealed coppers.

(1)18~10AWGの場合/18~10AWG cables

E209288(UL)TC 600V 90℃ DRY 75℃ WET サイズ/線心数 or MTW 600V サイズ/線心数 FLEXING VW-1 or AWM 2501 VW-1 E67647    AWM ⅡA/B 105℃ 600V FT1 TAIYO   CE VV5 300/500V <PS>E ** LF

(2)8~6AWGの場合/8~6AWG cables

E209288(UL)TC 600V 90℃ DRY 75℃ WET サイズ/線心数 or MTW 600V サイズ/線心数 VW-1 or AWM 2501 VW-1 E67647    AWM ⅡA/B 105℃ 600V FT1 TAIYO   CE VV5 300/500V LF

2C3C4C2C3C4C2C3C4C10C2C3C4C2C3C4C2C3C4C2C3C4C

9.49.910.610.110.611.410.811.412.318.111.812.413.513.213.915.218.820.023.121.223.525.8

951151351151401701401752104451802252752403053854205457455757951020

12.711.09.815.013.011.621.018.216.211.227.023.420.836.731.828.462.253.948.182.571.563.8

10C

1

9

10

5

8 2

6 4

7 32

14

3

4C

・TC、MTW

18(0.89㎟) 35/0.18 1.2 0.85 22.8 60 20002.9 1.7

16(1.38㎟) 26/0.26 1.5 0.85 14.3 60 20003.2 1.7

14(2.18㎟) 41/0.26 1.9 0.85 9.01 60 20003.6 1.7

12(3.34㎟) 66/0.26 2.4 0.85 5.45 50 20004.1 1.7

10(5.41㎟) 104/0.26 3.1 0.85 3.44 50 20004.8 1.7

1.78(8.44㎟)7/15/0.32 4.2 1.7 2.41 50 25007.6

6(13.5㎟)7/24/0.32 5.3 1.7 1.53 50 25008.7 2.3

2.31.8

特徴 Features

構造図  Construction figure

表面印字  Surface Marking

識別  Identification

耐熱PVC絶縁体Heat resistant PVC insulation

導体(軟銅または、すずめっき軟銅より線)※Annealed or tinned annealed copperstranded conductors

テープTape

耐油耐熱柔軟性PVCシース(黒色)Oil, heat resistant and flexible PVC sheath(Black)

線心数No. of cores サイズ

Size(AWG)

構成Construction(本/mm)

導 体Conductor

耐熱ビニル絶縁体Heat resistant PVC insulation

電気特性Electrical Characteristics

外径Outside diameter(mm)

厚さThickness(mm)

導体抵抗Conductor resistance(Ω/km20℃)

絶縁抵抗Insulation resistance(MΩkm20℃)

耐電圧Electrical strength(V/1min.)

外径Outside diameter(mm)

概算質量Approx.weight(kg/km)

耐油耐熱柔軟性ビニルシースOil, heat -resistant flexible- PVC sheath

厚さThickness(mm)

外径Overall diameter 約approx(mm)

許容電流Allowable ampacity(A)

構造表  Construction table

許容電流

●電流減少係数(周囲温度の場合)/Adjustment factors(at ambient temperature)

301.00

400.91

500.82

600.71

700.58

800.41

90-

100-

販売標準長 Standard sale length100m 100m

●電流減少係数(多条布設の場合)/Adjustment factors(for multiple-line laying)

電 線 数 No. of cables電流減少係数 Adjustment factors

2~30.70

40.63

5~60.56

7~150.49

16~400.43

61~0.34

41~600.39

周 囲 温 度 Ambient temperature(℃)電流減少係数 Adjustment factors

・2501301.00

400.93

500.86

600.77

700.68

800.58

900.45

1000.26

周 囲 温 度 Ambient temperature(℃)電流減少係数 Adjustment factors

Allowable ampacity・本カタログの許容電流は空中1条布設、周囲温度30℃での値です。

・周囲温度、布設状況等によって下記の補正係数を乗じて下さい。

・The allowable ampacity of this catalog is a value at one in the air construction and the ambient temperature 30℃.

・Please multiply the following correction coefficient by the ambient temperature and the cable-laying conditions, etc.

RoHS

認 証 Certification

適合規格 Applicable standard

形式記号 Official symbol

定格電圧 Voltage rating定格温度 Temperature rating

導  体 Conductor

難 燃 性 Flame rating

UL AWM.cUL AWM

UL 758CSA C22.2 No.210UL STYLE 2501CSA AWM ⅡA/B600V105℃UL 758

CSA C22.2 No.210VW-1.FT1

UL TC

UL 1277

TC

600VDRY90℃ WET75℃

UL 1277

Vertical-Tray Flame Test

UL MTW

UL 1063

MTW

600VDRY90℃ WET60℃

UL 1063

VW-1

TUV.CEマーキング

HD21.13(IEC60227-7)H05VV5-F

(60227 IEC 75)300/500V70℃

HD383 Class 5(IEC60228 Class 5) EN50264-2-1(IEC60332-1)

電気用品安全法(18~10AWGのみ)電気用品の技術上の基準を定める省令第1項の別表第一ビニルキャブタイヤコード300V60℃

JIS C 3102JIS C 3152

JIS C 3005の4.26.2のb)

対象規格

表面印字

UL、cUL共用。(カテゴリ QPOR、AVLV2、ZKHZ、AVLV7)

UL VW-1、cUL FT1の難燃対応。

UL垂直トレイ難燃試験に合格。

耐油耐熱柔軟性ビニルシース材を使用。

CEマーキング適合宣言製品(TUV認定品)。(TUV証明書No.(18~12AWG)J2051249)(TUV証明書No.(10~6AWG)J2051252)

トレイケーブルとしても使用可能。

10AWG以下は、電気用品安全法に適合しています。

・・・・・・

Standard UL, cUL.(Category QPOR, AVLV2, ZKHZ, AVLV7)

Flame resisting : UL VW-1, cUL FT1.

It passes Vertical-Tray Flame Test of UL.

Oil, heat resistant and flexible PVC sheath material is used.

CE marking(TUV recognition product).(Certificate of TUV No.(18~20AWG)J2051249)(Certificate of TUV No.(10~6AWG)J2051252)

It is possible to use it as a tray cable.

10AWG or less cables have suited Product Safety of Electrical Appliance and Materials.

・・・・・・

RoHS対応品

※上記UL、CSA規格の耐電圧試験の他に2000V/5分間の試験 を実施しております。

※The examination of 2000V/5 minute besides the withstand voltage test on above mentioned UL standard and the CSA standard is executed.

・・

○内数字は黒色絶縁体上の白色ナンバリングを示す。/Figures in ○ indicate white numbering on black insulator.

UE/2501(N)/TC LF

UE/2501(N)/TC LF

海外規格ケーブル

海外規格ケーブル

耐 熱 性 ★★★★★耐 油 性 ★★★★★耐ノイズ性 ★難 燃 性 ★★★★★柔 軟 性 ★★★非移行性 ★★★★★移動特性 ★※特性は目安となります。

Page 20: P040-041 R04-05 [CS3]特徴 Features 構造図 Construction figure 識別 Identification SSX10516 LF UL VW-1の難燃対応。(カテゴリ AVLV2) 絶縁体にフッ素樹脂を使用。

UE/2501-SB(N)/TC LFケーブルトレイ、レースウェイ配線用、電子機器配線用ケーブルFor tray cable, race way and electronic equipment cable

(1)18~10AWGの場合/18~10AWG cables

E209288(UL)TC 600V 90℃ DRY 75℃ WET サイズ/線心数 or MTW 600V サイズ/線心数 FLEXING VW-1 or AWM 2501 VW-1 E67647    AWM ⅡA/B 105℃ 600V FT1 TAIYO CE VV5 300/500V <PS>E ** LF

(2)8~6AWGの場合/8~6AWG cables

E209288(UL)TC 600V 90℃ DRY 75℃ WET サイズ/線心数 or MTW 600V サイズ/線心数 VW-1 or AWM 2501 VW-1 E67647    AWM ⅡA/B 105℃ 600V FT1 TAIYO CE VV5 300/500V LF

2

14

3

4C

23

3C

1

6C

12

3

6

54

2C3C4C6C2C3C4C2C3C4C2C3C4C2C3C4C3C4C3C4C

10.010.511.313.010.711.312.111.512.113.012.513.114.313.914.716.021.023.924.326.6

1251451702301451752101752102552202653302853604456408459001130

12.711.09.88.315.013.011.621.018.216.227.023.420.836.731.828.453.948.171.563.8

18(0.89㎟) 35/0.18 1.2 0.85 22.8 60 20002.9 1.7

16(1.38㎟) 26/0.26 1.5 0.85 14.3 60 20003.2 1.7

14(2.18㎟) 41/0.26 1.9 0.85 9.01 60 20003.6 1.7

12(3.34㎟) 66/0.26 2.4 0.85 5.45 50 20004.1 1.7

10(5.41㎟)104/0.26 3.1 0.85 3.44 50 20004.8 1.7

1.82.3

2.3

8(8.44㎟)7/15/0.32 4.2 1.7 2.41 50 25007.6

6(13.5㎟)7/24/0.32 5.3 1.7 1.53 50 25008.7

特徴 Features

構造図  Construction figure

表面印字  Surface Marking

識別  Identification

耐熱PVC絶縁体Heat resistant PVC insulation

導体(軟銅または、すずめっき軟銅より線)※Annealed or tinned annealed copperstranded conductors

テープTape

耐油耐熱柔軟性PVCシース(黒色)Oil, heat resistant and flexible PVC sheath(Black)

すずめっき軟銅線編組Tinned annealed copper braid shield

構造表  Construction table

・TC、MTW

許容電流

●電流減少係数(周囲温度の場合)/Adjustment factors(at ambient temperature)

301.00

400.91

500.82

600.71

700.58

800.41

90-

100-

販売標準長 Standard sale length100m 100m

●電流減少係数(多条布設の場合)/Adjustment factors(for multiple-line laying)

電 線 数 No. of cables電流減少係数 Adjustment factors

2~30.70

40.63

5~60.56

7~150.49

16~400.43

61~0.34

41~600.39

周 囲 温 度 Ambient temperature(℃)電流減少係数 Adjustment factors

・2501301.00

400.93

500.86

600.77

700.68

800.58

900.45

1000.26

周 囲 温 度 Ambient temperature(℃)電流減少係数 Adjustment factors

Allowable ampacity・本カタログの許容電流は空中1条布設、周囲温度30℃での値です。

・周囲温度、布設状況等によって下記の補正係数を乗じて下さい。

・The allowable ampacity of this catalog is a value at one in the air construction and the ambient temperature 30℃.

・Please multiply the following correction coefficient by the ambient temperature and the cable-laying conditions, etc.

線心数No. of cores サイズ

Size(AWG)

構成Construction(本/mm)

導 体Conductor

耐熱ビニル絶縁体Heat resistant PVC insulation

電気特性Electrical Characteristics

外径Outside diameter(mm)

厚さThickness(mm)

導体抵抗Conductor resistance(Ω/km20℃)

絶縁抵抗Insulation resistance(MΩkm20℃)

耐電圧Electrical strength(V/1min.)

外径Outside diameter(mm)

概算質量Approx.weight(kg/km)

耐油耐熱柔軟性ビニルシースOil, heat -resistant flexible- PVC sheath

厚さThickness(mm)

外径Overall diameter 約approx(mm)

許容電流Allowable ampacity(A)

○内数字は黒色絶縁体上の白色ナンバリングを示す。/Figures in ○ indicate white numbering on black insulator.

UL、cUL共用。(カテゴリ QPOR、AVLV2、ZKHZ、AVLV7)

UL VW-1、cUL FT1の難燃対応。

UL垂直トレイ難燃試験に合格。

耐油耐熱柔軟性ビニルシース材を使用。

CEマーキング適合宣言製品。

トレイケーブルとしても使用可能。

10AWG以下は、電気用品安全法に適合しています。

Standard UL, cUL.(Category QPOR, AVLV2, ZKHZ, AVLV7)

Flame resisting : UL VW-1, cUL FT1.

It passes Vertical-Tray Flame Test of UL.

Oil, heat resistant and flexible PVC sheath material is used.

CE marking.

It is possible to use it as a tray cable.

10AWG or less cables have suited Product Safety of Electrical Appliance and Materials.

RoHS

認 証 Certification

適合規格 Applicable standard

形式記号 Official symbol

定格電圧 Voltage rating定格温度 Temperature rating

導  体 Conductor

難 燃 性 Flame rating

UL AWM.cUL AWM

UL 758CSA C22.2 No.210UL STYLE 2501CSA AWM ⅡA/B600V105℃UL 758

CSA C22.2 No.210VW-1.FT1

UL TC

UL 1277

TC

600VDRY90℃ WET75℃

UL 1277

Vertical-Tray Flame Test

UL MTW

UL 1063

MTW

600VDRY90℃ WET60℃

UL 1063

VW-1

CEマーキング

HD21.13(IEC60227-7)H05VV5-F

(60227 IEC 75)300/500V70℃

HD383 Class 5(IEC60228 Class 5) EN50264-2-1(IEC60332-1)

電気用品安全法(18~10AWGのみ)電気用品の技術上の基準を定める省令第1項の別表第一ビニルキャブタイヤコード300V60℃

JIS C 3102JIS C 3152

JIS C 3005の4.26.2のb)

対象規格

表面印字

RoHS対応品

※上記UL、CSA規格の耐電圧試験の他に2000V/5分間の試験 を実施しております。

※The examination of 2000V/5 minute besides the withstand voltage test on above mentioned UL standard and the CSA standard is executed.

※12AWG以上は軟銅より線/12AWG or more are stranded annealed coppers.

UE/2501-SB(N)/TC LF

UE/2501-SB(N)/TC LF

海外規格ケーブル

海外規格ケーブル

耐 熱 性 ★★★★★耐 油 性 ★★★★★耐ノイズ性 ★★★難 燃 性 ★★★★★柔 軟 性 ★★★非移行性 ★★★★★移動特性 ★※特性は目安となります。

Page 21: P040-041 R04-05 [CS3]特徴 Features 構造図 Construction figure 識別 Identification SSX10516 LF UL VW-1の難燃対応。(カテゴリ AVLV2) 絶縁体にフッ素樹脂を使用。

UE/2501E(N)/TC[Y/G] LFケーブルトレイ、レースウェイ配線用、電子機器配線用ケーブルFor tray cable, race way and electronic equipment cable

13E(12C+1E)4E

2

14

3

512

611

710

89

Y/G

2

1

3

Y/G

3E4E

6C+1E10C+1E12C+1E15C+1E20C+1E30C+1E40C+1E3E4E

6C+1E10C+1E12C+1E20C+1E30C+1E40C+1E3E4E7E11E13E21E3E4E7E3E4E7E

9.910.613.615.616.417.219.924.226.910.611.414.516.917.922.826.229.411.412.315.618.619.625.112.413.517.213.915.219.5

1151352303053503955057509351401702753804356909451220175210340490555920225280455305385640

12.711.08.36.85.75.75.14.23.715.013.09.88.06.86.05.04.421.018.213.711.29.58.427.023.417.636.731.824.0

※線心数表記“+1E”の場合、14AWGの[Y/G]アース線入りとなります。 (例)6C+1E×18AWG:6×18AWG+1×14AWG(アース) 線心数表記“E”は、同等サイズの[Y/G]アース線入りとなります。 (例)3E×14AWG:2×14AWG+1×14AWG (アース)

※Core number mark “+1E” has the [Y/G] earth cable of 14AWG size.※Core number mark “E” has the [Y/G] earth cable of an equal size.

(1)6心以下/6 cores or less

(2)7心以上/7 cores or more

E209288(UL)TC 600V 90℃ DRY 75℃ WET サイズ/線心数 or MTW 600V サイズ/線心数 FLEXING VW-1 or AWM 2501 VW-1 E67647    AWM ⅡA/B 105℃ 600V FT1 TAIYO   CE VV5 300/500V <PS>E ** LF

E209288(UL)TC 600V 90℃ DRY 75℃ WET サイズ/線心数+サイズ(Y/G)/1C or MTW 600V サイズ/線心数+サイズ(Y/G)/1C FLEXING VW-1 orAWM 2501 VW-1 E67647    AWM ⅡA/B 105℃ 600V FT1 TAIYO   CE VV5 300/500V <PS>E ** LF

18(0.89㎟)35/0.18 1.2 0.85 22.8 60 20002.9

1.7

16(1.38㎟)26/0.26 1.5 0.85 14.3 60 20003.2

1.7

1.7

1.7

2.3

2.3

2.3

2.4

14(2.18㎟)41/0.26 1.9 0.85 9.01 60 20003.6

12(3.34㎟)66/0.26 2.4 0.85 5.45 50 20004.1

10(5.41㎟)104/0.26 3.1 0.85 3.44 50 20004.8

1.7

特徴 Features 構造表  Construction table

識別  Identification

表面印字  Surface Marking

構造図  Construction figure耐熱PVC絶縁体Heat resistant PVC insulation

導体(軟銅または、すずめっき軟銅より線)※Annealed or tinned annealed copperstranded conductors

テープTape

耐油耐熱柔軟性PVCシース(黒色)Oil, heat resistant and flexible PVC sheath(Black)

・TC、MTW

許容電流

●電流減少係数(周囲温度の場合)/Adjustment factors(at ambient temperature)

301.00

400.91

500.82

600.71

700.58

800.41

90-

100-

●電流減少係数(多条布設の場合)/Adjustment factors(for multiple-line laying)

電 線 数 No. of cables電流減少係数 Adjustment factors

2~30.70

40.63

5~60.56

7~150.49

16~400.43

61~0.34

41~600.39

周 囲 温 度 Ambient temperature(℃)電流減少係数 Adjustment factors

・2501301.00

400.93

500.86

600.77

700.68

800.58

900.45

1000.26

周 囲 温 度 Ambient temperature(℃)電流減少係数 Adjustment factors

Allowable ampacity・本カタログの許容電流は空中1条布設、周囲温度30℃での値です。

・周囲温度、布設状況等によって下記の補正係数を乗じて下さい。

・The allowable ampacity of this catalog is a value at one in the air construction and the ambient temperature 30℃.

・Please multiply the following correction coefficient by the ambient temperature and the cable-laying conditions, etc.

販売標準長 Standard sale length100m(切断販売が可能なサイズもございます。詳細は窓口にお問い合わせ下さい。)

100m(There are sizes that can be the cutting sales, too. Please inquire of sales staff in detail.)

線心数No. of cores サイズ

Size(AWG)

構成Construction(本/mm)

導 体Conductor

耐熱ビニル絶縁体Heat resistant PVC insulation

電気特性Electrical Characteristics

外径Outside diameter(mm)

厚さThickness(mm)

導体抵抗Conductor resistance(Ω/km20℃)

絶縁抵抗Insulation resistance(MΩkm20℃)

耐電圧Electrical strength(V/1min.)

外径Outside diameter(mm)

概算質量Approx.weight(kg/km)

耐油耐熱柔軟性ビニルシースOil, heat -resistant flexible- PVC sheath

厚さThickness(mm)

外径Overall diameter 約approx(mm)

許容電流Allowable ampacity(A)

RoHS

認 証 Certification

適合規格 Applicable standard

形式記号 Official symbol

定格電圧 Voltage rating定格温度 Temperature rating

導  体 Conductor

難 燃 性 Flame rating

UL AWM.cUL AWMUL 758

CSA C22.2 No.210UL STYLE 2501CSA AWM ⅡA/B600V105℃UL 758

CSA C22.2 No.210VW-1.FT1

UL TC

UL 1277

TC

600VDRY90℃ WET75℃

UL 1277

Vertical-Tray Flame Test

UL MTW

UL 1063

MTW

600VDRY90℃ WET60℃

UL 1063

VW-1

TUV.CEマーキングHD21.13

(IEC60227-7)H05VV5-F

(60227 IEC 75)300/500V70℃

HD383 Class 5(IEC60228 Class 5) EN50264-2-1(IEC60332-1)

電気用品安全法電気用品の技術上の基準を定める省令第1項の別表第一ビニルキャブタイヤコード300V60℃

JIS C 3102JIS C 3152

JIS C 3005の4.26.2のb)

対象規格

○内数字は黒色絶縁体上の白色ナンバリングを示す。/Figures in ○ indicate white numbering on black insulator.

※Y/G線は緑地に黄色の3本埋込色帯(30~50%)となります。/Y/G indicates green core with yellow stripe(30~50%).

UL、cUL共用。(カテゴリ QPOR、AVLV2、ZKHZ、AVLV7)

UL VW-1、cUL FT1の難燃対応。

UL垂直トレイ難燃試験に合格。

耐油耐熱柔軟性ビニルシース材を使用。

CEマーキング適合宣言製品(TUV認定品)。

(TUV証明書No.(n×18AWG+1×14AWG)J2051273)       n×16(TUV証明書No.(14~12AWG)J2051249)(TUV証明書No.(10AWG)J2051252)

トレイケーブルとしても使用可能。

電気用品安全法に適合しています。

・・・・・・・・

Standard UL, cUL.(Category QPOR, AVLV2, ZKHZ, AVLV7)

Flame resisting : UL VW-1, cUL FT1.

It passes Vertical-Tray Flame Test of UL.

Oil, heat resistant and flexible PVC sheath material is used.

CE marking(TUV recognition product).

(Certificate of TUV No.(n×18AWG+1×14AWG)J2051273)       n×16(Certificate of TUV No.(14~12AWG)J2051249)(Certificate of TUV No.(10AWG)J2051252)

It is possible to use it as a tray cable.

It suits Product Safety of Electrical Appliance and Materials.

・・・・・・・・

表面印字

RoHS対応品

※上記UL、CSA規格の耐電圧試験の他に2000V/5分間の試験 を実施しております。

※The examination of 2000V/5 minute besides the withstand voltage test on above mentioned UL standard and the CSA standard is executed.

・・

※12AWG以上は軟銅より線/12AWG or more are stranded annealed coppers.

UE/2501E(N)/TC[Y/G] LF

UE/2501E(N)/TC[Y/G] LF

海外規格ケーブル

海外規格ケーブル

耐 熱 性 ★★★★★耐 油 性 ★★★★★耐ノイズ性 ★難 燃 性 ★★★★★柔 軟 性 ★★★非移行性 ★★★★★移動特性 ★※特性は目安となります。

Page 22: P040-041 R04-05 [CS3]特徴 Features 構造図 Construction figure 識別 Identification SSX10516 LF UL VW-1の難燃対応。(カテゴリ AVLV2) 絶縁体にフッ素樹脂を使用。

特徴

構造図  Construction figure

UE/2501E-SB(N)/TC[Y/G] LF

導体(軟銅または、すずめっき軟銅より線)※Annealed or tinned annealed copperstranded conductors

構造表  Construction table

識別  Identification

ケーブルトレイ、レースウェイ配線用、電子機器配線用ケーブルFor tray cable, race way and electronic equipment cable

テープTape

耐油耐熱柔軟性PVCシース(黒色)Oil, heat resistant and flexible PVC sheath(Black)

耐熱PVC絶縁体Heat resistant PVC insulation

4E

すずめっき軟銅線編組Tinned annealed copper braid shield

12C+1E

2

14

3

512

611

710

89

Y/G

2

1

3

Y/G

表面印字  Surface Marking(1)6心以下/6 cores or less

(2)7心以上/7 cores or more

E209288(UL)TC 600V 90℃ DRY 75℃ WET サイズ/線心数 or MTW 600V サイズ/線心数 FLEXING VW-1 or AWM 2501 VW-1 E67647    AWM ⅡA/B 105℃ 600V FT1 TAIYO CE VV5 300/500V <PS>E ** LF

E209288(UL)TC 600V 90℃ DRY 75℃ WET サイズ/線心数+サイズ(Y/G)/1C or MTW 600V サイズ/線心数+サイズ(Y/G)/1C FLEXING VW-1 orAWM 2501 VW-1 E67647    AWM ⅡA/B 105℃ 600V FT1 TAIYO CE VV5 300/500V <PS>E ** LF

Features

3E4E

6C+1E10C+1E12C+1E20C+1E30C+1E3E4E

6C+1E3E4E3E4E

10.511.314.416.417.220.925.011.312.115.312.113.013.114.3

145170285370420600850175205335215255265330

12.711.08.36.85.75.14.215.013.09.821.016.227.023.4

※線心数表記“+1E”の場合、14AWGの[Y/G]アース線入りとなります。 (例)6C+1E×18AWG:6×18AWG+1×14AWG(アース) 線心数表記“E”は、同等サイズの[Y/G]アース線入りとなります。 (例)3E×14AWG:2×14AWG+1×14AWG (アース)

※Core number mark “+1E” has the [Y/G] earth cable of 14AWG size.※Core number mark “E” has the [Y/G] earth cable of an equal size.

18(0.89㎟) 35/0.18 1.2 0.85 22.8 60 20002.9

16(1.38㎟) 26/0.26 1.5 0.85 14.3 60 20003.2

1.7

14(2.18㎟) 41/0.26 1.9 0.85 9.01 60 20003.6 1.712

(3.34㎟) 66/0.26 2.4 0.85 5.45 50 20004.1 1.7

1.7

1.82.3

・TC、MTW●電流減少係数(周囲温度の場合)/Adjustment factors(at ambient temperature)

301.00

400.91

500.82

600.71

700.58

800.41

90-

100-

●電流減少係数(多条布設の場合)/Adjustment factors(for multiple-line laying)

電 線 数 No. of cables電流減少係数 Adjustment factors

2~30.70

40.63

5~60.56

7~150.49

16~400.43

61~0.34

41~600.39

周 囲 温 度 Ambient temperature(℃)電流減少係数 Adjustment factors

・2501301.00

400.93

500.86

600.77

700.68

800.58

900.45

1000.26

周 囲 温 度 Ambient temperature(℃)電流減少係数 Adjustment factors

Allowable ampacity・本カタログの許容電流は空中1条布設、周囲温度30℃での値です。

・周囲温度、布設状況等によって下記の補正係数を乗じて下さい。

・The allowable ampacity of this catalog is a value at one in the air construction and the ambient temperature 30℃.

・Please multiply the following correction coefficient by the ambient temperature and the cable-laying conditions, etc.

販売標準長 Standard sale length

線心数No. of cores サイズ

Size(AWG)

構成Construction(本/mm)

導 体Conductor

耐熱ビニル絶縁体Heat resistant PVC insulation

電気特性Electrical Characteristics

外径Outside diameter(mm)

厚さThickness(mm)

導体抵抗Conductor resistance(Ω/km20℃)

絶縁抵抗Insulation resistance(MΩkm20℃)

耐電圧Electrical strength(V/1min.)

外径Outside diameter(mm)

概算質量Approx.weight(kg/km)

耐油耐熱柔軟性ビニルシースOil, heat -resistant flexible- PVC sheath

厚さThickness(mm)

外径Overall diameter 約approx(mm)

許容電流Allowable ampacity(A)

RoHS

認 証 Certification

適合規格 Applicable standard

形式記号 Official symbol

定格電圧 Voltage rating定格温度 Temperature rating

導  体 Conductor

難 燃 性 Flame rating

UL AWM.cUL AWMUL 758

CSA C22.2 No.210UL STYLE 2501CSA AWM ⅡA/B600V105℃UL 758

CSA C22.2 No.210VW-1.FT1

UL TC

UL 1277

TC

600VDRY90℃ WET75℃

UL 1277

Vertical-Tray Flame Test

UL MTW

UL 1063

MTW

600VDRY90℃ WET60℃

UL 1063

VW-1

CEマーキングHD21.13

(IEC60227-7)H05VV5-F

(60227 IEC 75)300/500V70℃

HD383 Class 5(IEC60228 Class 5) EN50264-2-1(IEC60332-1)

電気用品安全法電気用品の技術上の基準を定める省令第1項の別表第一ビニルキャブタイヤコード300V60℃

JIS C 3102JIS C 3152

JIS C 3005の4.26.2のb)

対象規格

UL、cUL共用。(カテゴリ QPOR、AVLV2、ZKHZ、AVLV7)

UL VW-1、cUL FT1の難燃対応。

UL垂直トレイ難燃試験に合格。

耐油耐熱柔軟性ビニルシース材を使用。

CEマーキング適合宣言製品。

トレイケーブルとしても使用可能。

電気用品安全法に適合しています。

Standard UL, cUL.(Category QPOR, AVLV2, ZKHZ, AVLV7)

Flame resisting : UL VW-1, cUL FT1.

It passes Vertical-Tray Flame Test of UL.

Oil, heat resistant and flexible PVC sheath material is used.

CE marking.

It is possible to use it as a tray cable.

It suits Product Safety of Electrical Appliance and Materials.

○内数字は黒色絶縁体上の白色ナンバリングを示す。/Figures in ○ indicate white numbering on black insulator.

※Y/G線は緑地に黄色の3本埋込色帯(30~50%)となります。/Y/G indicates green core with yellow stripe(30~50%).

100m(切断販売が可能なサイズもございます。詳細は窓口にお問い合わせ下さい。)

100m(There are sizes that can be the cutting sales, too. Please inquire of sales staff in detail.)

許容電流

表面印字

RoHS対応品

※上記UL、CSA規格の耐電圧試験の他に2000V/5分間の試験 を実施しております。

※The examination of 2000V/5 minute besides the withstand voltage test on above mentioned UL standard and the CSA standard is executed.

※12AWG以上は軟銅より線/12AWG or more are stranded annealed coppers.

UE/2501E-SB(N)/TC[Y/G] LF

UE/2501E-SB(N)/TC[Y/G] LF

海外規格ケーブル

海外規格ケーブル

耐 熱 性 ★★★★★耐 油 性 ★★★★★耐ノイズ性 ★★★難 燃 性 ★★★★★柔 軟 性 ★★★非移行性 ★★★★★移動特性 ★※特性は目安となります。

Page 23: P040-041 R04-05 [CS3]特徴 Features 構造図 Construction figure 識別 Identification SSX10516 LF UL VW-1の難燃対応。(カテゴリ AVLV2) 絶縁体にフッ素樹脂を使用。

特徴

構造図  Construction figure

UE/2501E(N)/TC[Y/G]LG LF

識別  Identification

ケーブルトレイ、レースウェイ配線用、電子機器配線用ケーブルFor tray cable, race way and electronic equipment cable

12C+1E

2

14

3

512

611

710

89

Y/G7E(6C+1E)

1

2

3

6

5

4

Y/G

表面印字  Surface Marking

E209288(UL)TC 600V 90℃ DRY 75℃ WET サイズ/線心数+サイズ(Y/G)/1C or MTW 600V サイズ/線心数+サイズ(Y/G)/1C FLEXING VW-1 orAWM 2501 VW-1 E67647    AWM ⅡA/B 105℃ 600V FT1 TAIYO   CE VV5 300/500V <PS>E ** LF

Features

6C+1E10C+1E12C+1E16C+1E20C+1E24C+1E30C+1E40C+1E6C+1E10C+1E12C+1E20C+1E30C+1E40C+1E7E11E13E17E21E25E7E4E7E

13.615.616.417.219.922.624.226.914.516.917.922.826.229.415.618.619.622.925.127.117.215.219.5

23030535042050563075093527538043569094512203404905557609201070455385640

8.36.85.75.75.15.14.23.79.88.06.86.05.04.413.711.29.58.48.47.017.631.824.0

※線心数表記“+1E”の場合、14AWGの[Y/G]アース線入りとなります。 (例)6C+1E×18AWG:6×18AWG+1×14AWG(アース) 線心数表記“E”は、同等サイズの[Y/G]アース線入りとなります。 (例)3E×14AWG:2×14AWG+1×14AWG (アース)

※Core number mark “+1E” has the [Y/G] earth cable of 14AWG size.※Core number mark “E” has the [Y/G] earth cable of an equal size.

18(0.89㎟) 35/0.18 1.2 0.85 22.8 60 20002.9

1.7

16(1.38㎟) 26/0.26 1.5 0.85 14.3 60 2000

9.01 60 2000

3.2

14(2.18㎟) 41/0.26 1.9 0.85 3.6

1.7

2.3

2.32.4

12(3.34㎟) 66/0.26 2.4 0.85 5.45 50 20004.110

(5.52㎟)104/0.26 3.1 0.85 3.44 50 20004.8

1.7

2.3

1.71.7

構造表  Construction table

・TC、MTW

許容電流

●電流減少係数(周囲温度の場合)/Adjustment factors(at ambient temperature)

301.00

400.91

500.82

600.71

700.58

800.41

90-

100-

●電流減少係数(多条布設の場合)/Adjustment factors(for multiple-line laying)

電 線 数 No. of cables電流減少係数 Adjustment factors

2~30.70

40.63

5~60.56

7~150.49

16~400.43

61~0.34

41~600.39

周 囲 温 度 Ambient temperature(℃)電流減少係数 Adjustment factors

・2501301.00

400.93

500.86

600.77

700.68

800.58

900.45

1000.26

周 囲 温 度 Ambient temperature(℃)電流減少係数 Adjustment factors

Allowable ampacity・本カタログの許容電流は空中1条布設、周囲温度30℃での値です。

・周囲温度、布設状況等によって下記の補正係数を乗じて下さい。

・The allowable ampacity of this catalog is a value at one in the air construction and the ambient temperature 30℃.

・Please multiply the following correction coefficient by the ambient temperature and the cable-laying conditions, etc.

販売標準長 Standard sale length100m(切断販売が可能なサイズもございます。詳細は窓口にお問い合わせ下さい。)

100m(There are sizes that can be the cutting sales, too. Please inquire of sales staff in detail.)

線心数No. of cores サイズ

Size(AWG)

構成Construction(本/mm)

導 体Conductor

耐熱ビニル絶縁体Heat resistant PVC insulation

電気特性Electrical Characteristics

外径Outside diameter(mm)

厚さThickness(mm)

導体抵抗Conductor resistance(Ω/km20℃)

絶縁抵抗Insulation resistance(MΩkm20℃)

耐電圧Electrical strength(V/1min.)

外径Outside diameter(mm)

概算質量Approx.weight(kg/km)

耐油耐熱柔軟性ビニルシースOil, heat -resistant flexible- PVC sheath

厚さThickness(mm)

外径Overall diameter 約approx(mm)

許容電流Allowable ampacity(A)

耐熱PVC絶縁体Heat resistant PVC insulation

導体(軟銅または、すずめっき軟銅より線)※Annealed or tinned annealed copperstranded conductors

テープTape

耐油耐熱柔軟性PVCシース(ライトグレー)Oil, heat resistant and flexible PVC sheath(Light Gray)

RoHS

認 証 Certification

適合規格 Applicable standard

形式記号 Official symbol

定格電圧 Voltage rating定格温度 Temperature rating

導  体 Conductor

難 燃 性 Flame rating

UL AWM.cUL AWMUL 758

CSA C22.2 No.210UL STYLE 2501CSA AWM ⅡA/B600V105℃UL 758

CSA C22.2 No.210VW-1.FT1

UL TC

UL 1277

TC

600VDRY90℃ WET75℃

UL 1277

Vertical-Tray Flame Test

UL MTW

UL 1063

MTW

600VDRY90℃ WET60℃

UL 1063

VW-1

TUV.CEマーキングHD21.13

(IEC60227-7)H05VV5-F

(60227 IEC 75)300/500V70℃

HD383 Class 5(IEC60228 Class 5) EN50264-2-1(IEC60332-1)

電気用品安全法電気用品の技術上の基準を定める省令第1項の別表第一ビニルキャブタイヤコード300V60℃

JIS C 3102JIS C 3152

JIS C 3005の4.26.2のb)

対象規格

○内数字は青色絶縁体上の白色ナンバリングを示す。/Figures in ○ indicate white numbering on blue insulator.

※Y/G線は緑地に黄色の3本埋込色帯(30~50%)となります。/Y/G indicates green core with yellow stripe(30~50%).

UL、cUL共用。(カテゴリ QPOR、AVLV2、ZKHZ、AVLV7)

UL VW-1、cUL FT1の難燃対応。

UL垂直トレイ難燃試験に合格。

耐油耐熱柔軟性ビニルシース材を使用。

CEマーキング適合宣言製品(TUV認定品)。

(TUV証明書No.(n×18AWG+1×14AWG)J2051273)       n×16(TUV証明書No.(14~12AWG)J2051249)(TUV証明書No.(10AWG)J2051252)

トレイケーブルとしても使用可能。

電気用品安全法に適合しています。

・・

Standard UL, cUL.(Category QPOR, AVLV2, ZKHZ, AVLV7)

Flame resisting : UL VW-1, cUL FT1.

It passes Vertical-Tray Flame Test of UL.

Oil, heat resistant and flexible PVC sheath material is used.

CE marking(TUV recognition product).

(Certificate of TUV No.(n×18AWG+1×14AWG)J2051273)         n×16(Certificate of TUV No.(14~12AWG)J2051249)(Certificate of TUV No.(10AWG)J2051252)

It is possible to use it as a tray cable.

It suits Product Safety of Electrical Appliance and Materials.

表面印字

RoHS対応品

※上記UL、CSA規格の耐電圧試験の他に2000V/5分間の試験 を実施しております。

※The examination of 2000V/5 minute besides the withstand voltage test on above mentioned UL standard and the CSA standard is executed.

・・・・・・

・・・・・・・・

・・

※12AWG以上は軟銅より線/12AWG or more are stranded annealed coppers.

UE/2501E(N)/TC[Y/G]LG LF

UE/2501E(N)/TC[Y/G]LG LF

海外規格ケーブル

海外規格ケーブル

耐 熱 性 ★★★★★耐 油 性 ★★★★★耐ノイズ性 ★難 燃 性 ★★★★★柔 軟 性 ★★★非移行性 ★★★★★移動特性 ★※特性は目安となります。

Page 24: P040-041 R04-05 [CS3]特徴 Features 構造図 Construction figure 識別 Identification SSX10516 LF UL VW-1の難燃対応。(カテゴリ AVLV2) 絶縁体にフッ素樹脂を使用。

線心数No. of cores サイズ

Size(AWG)

構成Construction(本/mm)

導 体Conductor

耐熱ビニル絶縁体Heat resistant PVC insulation

電気特性Electrical Characteristics

外径Outside diameter(mm)

厚さThickness(mm)

導体抵抗Conductor resistance(Ω/km20℃)

絶縁抵抗Insulation resistance(MΩkm20℃)

耐電圧Electrical strength(V/1min.)

外径Outside diameter(mm)

概算質量Approx.weight(kg/km)

耐油耐熱柔軟性ビニルシースOil, heat -resistant flexible- PVC sheath

厚さThickness(mm)

外径Overall diameter 約approx(mm)

許容電流Allowable ampacity(A)

特徴

構造図  Construction figure

識別  Identification

UE/2587-SB(N)[Y/G] LF

構造表  Construction table

電子機器配線用ケーブル Electronic equipment cable

インナーシースInner sheath

UL、cUL共用。(カテゴリ AVLV2、AVLV7)

UL VW-1、cUL FT1の難燃対応。

耐油耐熱柔軟性ビニルシース材を使用。

CEマーキング適合宣言製品(TUV認定品)。(TUV証明書No.J2150116)

インナーシース型シールド付ケーブル。

・・・・

※線心数表記“E”は、同等サイズの[Y/G]アース線入りとなります。 (例)6E×18AWG:5×18AWG+1×18AWG (アース)

※Core number mark “E” has the [Y/G] earth cable of an equal size.

表面印字  Surface Marking

E67647   AWM 2587 90℃ 600V VW-1 TAIYO    AWM ⅡA/B 90℃ 600V FT1 TAIYO   CE VV5 300/500V LF

導体(すずめっき軟銅より線)Tinned annealed copperstranded conductors

テープTape

耐油耐熱柔軟性PVCシース(黒色)Oil, heat resistant and flexible PVC sheath(Black)

耐熱PVC絶縁体Heat resistant PVC insulation

すずめっき軟銅線編組Tinned annealed copper braid shield

11E

1

2

5

43

Y/G

6E

6E8E11E13E16E21E31E41E6E11E13E21E31E41E6E11E13E21E

1.21.31.41.51.51.71.92.11.31.51.61.82.12.31.41.71.82.1

11.913.915.416.216.919.723.125.513.416.917.922.325.528.415.420.021.125.8

20027033037041554575594026541547073097512403656006801020

88766554119876515121110

2

1

3

Y/G

76

5

410

9

8

18(0.89㎟) 35/0.18 1.2 0.6 22.8 10 20002.4

16(1.38㎟) 26/0.26 1.5 0.6 14.3 10 20002.7

14(2.18㎟) 41/0.26 1.9 0.7 9.01 10 20003.3

許容電流

●電流減少係数(周囲温度の場合)/Adjustment factors(at ambient temperature)

301.00

400.91

500.82

600.71

700.58

800.41

90-

100-

●電流減少係数(多条布設の場合)/Adjustment factors(for multiple-line laying)

電 線 数 No. of cables電流減少係数 Adjustment factors

2~30.70

40.63

5~60.56

7~150.49

16~400.43

61~0.34

41~600.39

周 囲 温 度 Ambient temperature(℃)電流減少係数 Adjustment factors

Allowable ampacity・本カタログの許容電流は空中1条布設、周囲温度30℃での値です。

・周囲温度、布設状況等によって下記の補正係数を乗じて下さい。

・The allowable ampacity of this catalog is a value at one in the air construction and the ambient temperature 30℃.

・Please multiply the following correction coefficient by the ambient temperature and the cable-laying conditions, etc.

販売標準長 Standard sale length

○内数字は黒色絶縁体上の白色ナンバリングを示す。/Figures in ○ indicate white numbering on black insulator.

※Y/G線は緑地に黄色の3本埋込色帯(30~50%)となります。/Y/G indicates green core with yellow stripe(30~50%).

Standard UL, cUL.(Category AVLV2, AVLV7)

Flame resisting : UL VW-1, cUL FT1.

Oil, heat resistant and flexible PVC sheath material is used.

CE marking(TUV recognition product).(Certificate of TUV No.J2150116)

It is an inner sheath type and a cable with the shield.

・・・・

100m(切断販売が可能なサイズもございます。詳細は窓口にお問い合わせ下さい。)

100m(There are sizes that can be the cutting sales, too. Please inquire of sales staff in detail.)

表面印字

RoHS対応品

※上記UL、CSA規格の耐電圧試験の他に2000V/5分間の試験 を実施しております。

※The examination of 2000V/5 minute besides the withstand voltage test on above mentioned UL standard and the CSA standard is executed.

対象規格

RoHS

認 証 Certification

適合規格 Applicable standard

形式記号 Official symbol

定格電圧 Voltage rating定格温度 Temperature rating

導  体 Conductor

難 燃 性 Flame rating

UL AWM

UL 758

UL STYLE 2587

600V90℃

UL 758

VW-1

cUL AWM

CSA C22.2 No.210

CSA AWM ⅡA/B

600V90℃

CSA C22.2 No.210

FT1

TUV.CEマーキングHD21.13

(IEC60227-7)H05VVC4V5-K(60227 IEC 74)300/500V70℃

HD383 Class 5(IEC60228 Class 5) EN50264-2-1(IEC332-1)

Features

・・UE/2587-SB(N)[Y/G] LF

UE/2587-SB(N)[Y/G] LF

海外規格ケーブル

海外規格ケーブル

耐 熱 性 ★★★★耐 油 性 ★★★★★耐ノイズ性 ★★★難 燃 性 ★★★★柔 軟 性 ★★★非移行性 ★★★★★移動特性 ★※特性は目安となります。

Page 25: P040-041 R04-05 [CS3]特徴 Features 構造図 Construction figure 識別 Identification SSX10516 LF UL VW-1の難燃対応。(カテゴリ AVLV2) 絶縁体にフッ素樹脂を使用。

特徴

UE/THHW LF

構造表  Construction table

UL、cUL共用。(カテゴリ ZKHZ、ZLGR、ZLGR7)

UL VW-1又は垂直トレイ難燃試験に合格。

耐熱性ビニル材料を使用。

CEマーキング適合宣言製品(TUV認定品)。(TUV証明書No.J50005945)

NEC規格のType Letterです。

ケーブルトレイ、レースウェイに使用可能。

(回路導体=1/0AWG以上、グランド導体=4AWG以上)

・・

Standard UL, cUL.(Category ZKHZ, ZLGR, ZLGR7)

It passes UL VW-1 or Vertical-Tray Flame Test of UL.

Heat resistant PVC material is used.

CE marking(TUV recognition product).(Certificate of TUV No.J50005945)

It is type letter of the NEC standard.

It is possible to use it for the cable tray and the race way,

(circuit conductor=1/0AWG or more, grand conductor=4AWG or more).

一般配線用電線 Electric wire for general wiring

線心数No. of cores サイズ

Size(AWG)

1C1C1C1C1C1C1C1C1C1C1C1C1C1C1C

14(2.14㎟)12(3.34㎟)10(5.27㎟)8(8.44㎟)6(13.5㎟)4(21.4㎟)2(33.8㎟)1(45.8㎟)1/0(54.4㎟)2/0(69.5㎟)3/0(90.7㎟)4/0(117.9㎟)300MCM(154.1㎟)400MCM(206.0㎟)500MCM(258.9㎟)

構成Construction(本/mm)

導 体Conductor

耐熱ビニル絶縁体Heat resistant PVC insulation

電気特性Electrical Characteristics

84/0.1866/0.254104/0.2547/15/0.327/24/0.327/38/0.327/60/0.3219/30/0.3219/18/0.4519/23/0.4519/30/0.4519/39/0.4519/51/0.4537/35/0.4537/44/0.45

外径Outside diameter(mm)1.92.43.14.25.36.68.39.810.712.113.815.718.020.723.2

厚さThickness(mm)0.850.850.851.251.71.71.72.32.32.32.32.32.72.72.7

導体抵抗Conductor resistance

(Ω/km20℃)8.615.423.412.141.350.8480.5340.4230.3350.2660.2110.1670.1180.0890.071

絶縁抵抗Insulation resistance(MΩkm20℃)

1751501251301351159510595858070706555

耐電圧Electrical strength(V/1min.)200020002000200020002000200025002500250025002500300030003000

外径Overall diameter(mm)

概算質量Approx.weight(kg/km)

3.64.14.86.78.710.011.714.415.316.718.420.323.426.328.8

29436511018026539555064080010201300170021902710

許容電流Allowable ampacity(A)

35405580105140190220260300350405505615700

識別  Identification・14AWG~3/0AWGまで黒、Y/G

・4/0AWG~500MCMまで黒

※Y/G線は緑地に黄色の3本埋込色帯(30~50%)となります。/Y/G indicates green core with yellow stripe(30~50%).

・14AWG~3/0AWG cable is a black and Y/G.

・4/0AWG~500MCM cable is a black.

※UE/THHWは、セパレータを施す場合があります。 ※UE/THHW might give the separator.

表面印字  Surface Marking

(1)14AWG~10AWG(回路導体)、14AWG~10AWG(Y/G線)  /14AWG~10AWG(circuit conductor)、14AWG~10AWG(Y/G)

(2)8AWG~1AWG(回路導体)、8AWG~6AWG(Y/G線)  /8AWG~1AWG(circuit conductor)、8AWG~6AWG(Y/G)

E242557(UL) MTW FLEXING or THHW 600V □□AWG VW-1 c(UL) TW75 600V □□AWG(○○mm2) FT1 TAIYO  CE 450/750V LF

E242557(UL) MTW or THHW 600V □□AWG VW-1 c(UL) TW75 600V □□AWG(○○mm2) FT1 TAIYO  CE 450/750V LF

(3)1/0AWG以上(回路導体)、4AWG以上(Y/G線)  /1/0AWG or more(circuit conductor)、4AWG or more(Y/G)

E242557(UL) MTW or THHW 600V □□AWG CT c(UL) TW75 600V □□AWG(○○mm2) FT1 TAIYO  CE 450/750V LF

Features

許容電流

●電流減少係数(周囲温度の場合)/Adjustment factors(at ambient temperature)

301.00

400.91

500.82

600.71

700.58

800.41

90-

100-

●電流減少係数(多条布設の場合)/Adjustment factors(for multiple-line laying)

電 線 数 No. of wires電流減少係数 Adjustment factors

2~30.70

40.63

5~60.56

7~150.49

16~400.43

61~0.34

41~600.39

周 囲 温 度 Ambient temperature(℃)電流減少係数 Adjustment factors

Allowable ampacity・本カタログの許容電流は空中1条布設、周囲温度30℃での値です。

・周囲温度、布設状況等によって下記の補正係数を乗じて下さい。

・The allowable ampacity of this catalog is a value at one in the air construction and the ambient temperature 30℃.

・Please multiply the following correction coefficient by the ambient temperature and the cable-laying conditions, etc.

販売標準長 Standard sale length100m8AWG~500MCMまでは切断販売可能。詳細は窓口にお問い合わせ下さい。

100m8AWG~500MCM cables can be cut. Please inquire of sales staff in detail.

構造図  Construction figure

導体(軟銅より線)Stranded annealed coppers

耐熱PVC絶縁体Heat resistant PVC insulation

・・・・

表面印字

RoHS対応品

※上記UL、CSA規格の耐電圧試験の他に2500V/5分間の試験 を実施しております。

※The examination of 2500V/5 minute besides the withstand voltage test on above mentioned UL standard and the CSA standard is executed.

・・

対象規格認 証 Certification

適合規格 Applicable standard

形式記号 Official symbol

定格電圧 Voltage rating定格温度 Temperature rating

導  体 Conductor

難 燃 性 Flame rating

UL THHW

UL 83

THHW

600VDRY90℃ WET75℃

UL 83

VW-1Vertical-Tray Flame Test

UL MTW

UL 1063

MTW

600VDRY90℃ WET60℃

UL 1063

VW-1

cUL TW75

CSA C22.2 No.75

TW75

600VDRY75℃ WET75℃

CSA C22.2 No.75

FT1

TUV.CEマーキングHD21.13

(IEC60227-7)H07V-K

(60227 IEC 02)450/750V70℃

HD383 Class 5(IEC60228 Class 5)

EN50264-2-1(IEC60332-1) RoHS

・・UE/THHW LF

UE/THHW LF

海外規格ケーブル

海外規格ケーブル

耐 熱 性 ★★★★耐 油 性 ★★★耐ノイズ性 ★難 燃 性 ★★★★柔 軟 性 ★★★非移行性 ★★★★★移動特性 ★※特性は目安となります。

Page 26: P040-041 R04-05 [CS3]特徴 Features 構造図 Construction figure 識別 Identification SSX10516 LF UL VW-1の難燃対応。(カテゴリ AVLV2) 絶縁体にフッ素樹脂を使用。

線心数No. of cores サイズ

Size(AWG)

構成Construction(本/mm)

導 体Conductor

耐熱ビニル絶縁体Heat resistant PVC insulation

電気特性Electrical Characteristics

外径Outside diameter(mm)

厚さThickness(mm)

導体抵抗Conductor resistance(Ω/km20℃)

絶縁抵抗Insulation resistance(MΩkm20℃)

耐電圧Electrical strength(V/1min.)

外径Outside diameter(mm)

概算質量Approx.weight(kg/km)

耐油耐熱柔軟性ビニルシースOil, heat -resistant flexible- PVC sheath

厚さThickness(mm)

外径Overall diameter 約approx(mm)

許容電流Allowable ampacity(A)

特徴

構造図  Construction figure

TC-ER LF

構造表  Construction table●

UL規格。(カテゴリ QPOR)

TC-ER認証に適合しております。※2心は対象外となりERに適用できません。

UL垂直トレイ難燃試験に合格。

耐油耐熱柔軟性ビニル材料を使用。

WET LOCATIONにも使用可能。

NEC規格のType Letterです。

ケーブルトレイ、レースウェイに使用可能。

UL standard.(Category QPOR)

Suits the TC-ER attestation.※2core product is excluded.(not “-ER”)

It passes Vertical-Tray Flame Test of UL.

Oil, heat resistant and flexible PVC material is used.

It is possible to use it also for WET LOCATION,

It is type letter of the NEC standard.

It is possible to use it for the cable tray and the race way,

ケーブルトレイ、レースウェイ配線用ケーブルFor tray cable and race way electronic equipment cable

※線心数表記“E”は、同等サイズの[Y/G]アース線入りとなります。 (例)3E×18AWG:2×18AWG+1×18AWG (アース)

※Core number mark “E” has the [Y/G] earth cable of an equal size.

表面印字  Surface Marking

識別  Identification

Y/G

3 2

1

4E

Y/G 2

1

3E

2

1

2C

2C3E4E2C3E4E2C3E4E2C3E4E2C3E4E3E4E3E4E3E4E3E4E

18(0.89㎟)

16(1.34㎟)

14(2.14㎟)

12(3.34㎟)

10(5.27㎟)

8(8.44㎟)

6(13.5㎟)

4(21.4㎟)

2(33.8㎟)

7/15/0.32

7/24/0.32

7/38/0.32

7/60/0.32

4.2

5.3

6.6

8.3

1.25

1.7

1.7

1.7

6.7

8.7

10.0

11.7

1.7

2.3

2.3

2.3

2.26

1.37

0.872

0.559

50

50

50

40

2000

2000

2000

2000

35/0.18

53/0.18

84/0.18

66/0.254

104/0.254

1.2

1.5

1.9

2.4

3.1

0.85

0.85

0.85

0.85

0.85

22.6

14.6

9.13

5.70

3.65

60

60

60

50

50

2000

2000

2000

2000

2000

2.9

3.2

3.6

4.1

4.8

1.25

1.25

1.25

1.25

1.7

8.58.99.79.19.610.49.910.511.410.911.512.612.313.015.218.019.823.525.826.428.930.033.0

80951159511514012015018515520025521528538549062082010401130143015902040

181815232320313126404035535347736410188133115176152

1.25

認 証 Certification適合規格 Applicable standard形式記号 Official symbol定格電圧 Voltage rating定格温度 Temperature rating導  体 Conductor難 燃 性 Flame rating

UL TCUL 1277TC600V

DRY90℃ WET75℃UL 1277

Vertical-Tray Flame Test

耐熱PVC絶縁体Heat resistant PVC insulation

テープTape

耐油耐熱柔軟性PVCシース(黒色)Oil, heat resistant and flexible PVC sheath(Black)

導体(軟銅より線)Stranded annealed coppers

Features

許容電流

●電流減少係数(周囲温度の場合)/Adjustment factors(at ambient temperature)

301.00

400.91

500.82

600.71

700.58

800.41

90-

100-

●電流減少係数(多条布設の場合)/Adjustment factors(for multiple-line laying)

電 線 数 No. of cables電流減少係数 Adjustment factors

2~30.70

40.63

5~60.56

7~150.49

16~400.43

61~0.34

41~600.39

周 囲 温 度 Ambient temperature(℃)電流減少係数 Adjustment factors

Allowable ampacity・本カタログの許容電流は空中1条布設、周囲温度30℃での値です。

・周囲温度、布設状況等によって下記の補正係数を乗じて下さい。

・The allowable ampacity of this catalog is a value at one in the air construction and the ambient temperature 30℃.

・Please multiply the following correction coefficient by the ambient temperature and the cable-laying conditions, etc.

販売標準長 Standard sale length100m(切断販売が可能なサイズもございます。詳細は窓口にお問い合わせ下さい。)

100m(There are sizes that can be the cutting sales, too. Please inquire of sales staff in detail.)

○内数字は黒色絶縁体上の白色ナンバリングを示す。/Figures in ○ indicate white numbering on black insulator.

※Y/G線は緑地に黄色の3本埋込色帯(30~50%)となります。/Y/G indicates green core with yellow stripe(30~50%).

表面印字

RoHS対応品

(1)2心/2 cores

(2)3心以上/3 cores

E209288-*(UL)TC 600V 90℃ DRY 75℃ WET 2×□□AWG TAIYO LF

E209288-*(UL)TC-ER 600V 90℃ DRY 75℃ WET 線心数×□□AWG TAIYO LF

対象規格

RoHS

TC- ER LF

TC- ER LF

海外規格ケーブル

海外規格ケーブル

耐 熱 性 ★★★★耐 油 性 ★★★★★耐ノイズ性 ★難 燃 性 ★★★★★柔 軟 性 ★★★非移行性 ★★★★★移動特性 ★※特性は目安となります。

Page 27: P040-041 R04-05 [CS3]特徴 Features 構造図 Construction figure 識別 Identification SSX10516 LF UL VW-1の難燃対応。(カテゴリ AVLV2) 絶縁体にフッ素樹脂を使用。

特徴

構造図  Construction figure

STO(A)/TC LF

構造表

識別  Identification

ケーブルトレイ、レースウェイ配線用、電気機器電源用コードFor tray cable, race way and electronic equipment power supply code

UL、cUL共用。(カテゴリ QPOR、ZJCZ、ZKHZ、ZJCZ7)

UL VW-1、cUL FT1の難燃対応。

UL垂直トレイ難燃試験に合格。

耐油耐熱柔軟性ビニル材料を使用。

トレイケーブルとしても使用可能。

電気用品安全法に適合しています。

Standard UL, cUL.(Category QPOR, ZJCZ, ZKHZ, ZJCZ7)

Flame resisting : UL VW-1, cUL FT1.

It passes Vertical-Tray Flame Test of UL.

Oil, heat resistant and flexible PVC material is used.

It is possible to use it as a tray cable.

It suits Product Safety of Electrical Appliance and Materials.

電気特性

・TC、MTW

・STO

※線心数表記“E”は、同等サイズの[Y/G]アース線入りとなります。 (例)3E×18AWG:2×18AWG+1×18AWG (アース)

※Core number mark “E” has the [Y/G] earth cable of an equal size.

E209288(UL)TC 600V 90℃ DRY 75℃ WET or MTW FLEXING VW-1 or STO 105℃ 600V VW-1 線心数×□□AWGc(UL) STO 105℃ 600V 線心数×□□AWG(○○mm2) FT1 TAIYO <PS>E ** LF

表面印字  Surface Marking(1)18AWG~10AWGの場合/18AWG~10AWG cables

(2)8AWG~2AWGの場合/8AWG~2AWG cables

E209288(UL)TC 600V 90℃ DRY 75℃ WET or MTW VW-1 or STO 105℃ 600V VW-1 線心数×□□AWG c(UL) STO 105℃ 600V 線心数×□□AWG(○○mm2) FT1 TAIYO <PS>E ** LF

Y/G

赤 白

4E

Y/G 白

3E

2C

線心数No. of cores サイズ

Size(AWG)

2C3E4E2C3E4E2C3E4E2C3E4E2C3E4E3E4E2C3E4E3E4E3E4E

18(0.89㎟)

16(1.34㎟)

14(2.14㎟)

12(3.34㎟)

10(5.27㎟)

構成Construction(本/mm)

導 体Conductor

耐熱ビニル絶縁体Heat resistant PVC insulation

35/0.18

53/0.18

84/0.18

66/0.254

104/0.254

外径Outside diameter(mm)

1.2

1.5

1.9

2.4

3.1

厚さThickness(mm)

0.85

0.85

1.25

1.25

1.25

外径Outside diameter(mm)

概算質量Approx.weight(kg/km)

2.9

3.2

4.4

4.9

5.6

耐油耐熱柔軟性ビニルシースOil, heat -resistant flexible- PVC sheath厚さ

Thickness(mm)

1.7

1.7

2.25

2.65

2.65

3.13.5

3.93.94.34.34.7

外径Overall diameter 約approx(mm)

9.39.710.59.910.511.313.514.215.315.316.117.316.717.619.022.825.524.625.929.029.632.934.438.3

9511513511513516520524529527533040034542552569189576595512301330171019102460

サイズSize

(AWG)18161412108642

22.614.08.855.553.502.261.370.8720.559

606060505050505040

200020003000300030004000400040004000

71015202535456080

101318253040557095

導体抵抗Conductor resistance(Ω/km20℃)

絶縁抵抗Insulation resistance(MΩkm20℃)

耐電圧Electrical strength(V/1min.) a

※許容電流(A)Allowable ampacity

b a:3心及びその他の多心コードで3心のみに電流が流れるコードに適用b:2心及びその他の多心コードで2心のみに電流が流れるコードに適用

※許容電流については、米国電気工事規定(NEC)により

a:Apply to 3-conductor cords and other multiconductor cords connected to utilization equipment so that only 3 conductors are current-carrying.b:Apply to 2-conductor cords and other multiconductor cords connected to utilization equipment so that only 2 conductors are current-carrying.

※Allowable ampacity By National Electrical Code(NEC)

8(8.44㎟) 7/15/0.32 4.2 1.7 7.6

6(13.5㎟) 7/24/0.32 5.3 1.7 8.7

4(21.4㎟) 7/38/0.32 6.6 1.7 10.0

2(33.8㎟) 7/60/0.32 8.3 1.8 11.9

3.5

Features

耐熱PVC絶縁体Heat resistant PVC insulation テープ

Tape

耐油耐熱柔軟性PVCシース(黒色)Oil, heat resistant and flexible PVC sheath(Black)

導体(軟銅より線)Stranded annealed coppers

許容電流

●電流減少係数(周囲温度の場合)/Adjustment factors(at ambient temperature)

301.00

400.91

500.82

600.71

700.58

800.41

90-

100-

●電流減少係数(多条布設の場合)/Adjustment factors(for multiple-line laying)

電 線 数 No. of cables電流減少係数 Adjustment factors

2~30.70

40.63

5~60.56

7~150.49

16~400.43

61~0.34

41~600.39

周 囲 温 度 Ambient temperature(℃)電流減少係数 Adjustment factors

301.00

400.93

500.86

600.77

700.68

800.58

900.45

1000.26

周 囲 温 度 Ambient temperature(℃)電流減少係数 Adjustment factors

Allowable ampacity

Electrical property

・本カタログの許容電流は空中1条布設、周囲温度30℃での値です。

・周囲温度、布設状況等によって下記の補正係数を乗じて下さい。

・The allowable ampacity of this catalog is a value at one in the air construction and the ambient temperature 30℃.

・Please multiply the following correction coefficient by the ambient temperature and the cable-laying conditions, etc.

販売標準長 Standard sale length100m(10~2AWGは、切断販売可能。詳細は窓口にお問い合わせ下さい。)

100m(10~2AWG cables can be cut. Please inquire of sales staff in detail.)

※Y/G線は緑地に黄色の3本埋込色帯(30~50%)となります。/Y/G indicates green core with yellow stripe(30~50%).

認 証 Certification

適合規格 Applicable standard

形式記号 Official symbol

定格電圧 Voltage rating定格温度 Temperature rating

導  体 Conductor

難 燃 性 Flame rating

UL STO

UL 62

STO

600V105℃

UL 62

VW-1

cUL STO

CSA C22.2 No.49

STO

600V105℃

CSA C22.2 No.49

FT1

UL TC

UL 1277

TC

600VDRY90℃ WET75℃

UL 1277

Vertical-Tray Flame Test

UL MTW

UL 1063

MTW

600VDRY90℃ WET60℃

UL 1063

VW-1

電気用品安全法(18~10AWG)電気用品の技術上の基準を定める省令第1項の別表第一ビニルキャブタイヤコード300V60℃

JIS C 3102

JIS C 3005の4.26.2のb)

電気用品安全法(8~2AWG)電気用品の技術上の基準を定める省令第1項の別表第一ビニルキャブタイヤケーブル600V60℃

JIS C 3102

JIS C 3005の4.26.2のb)

表面印字

RoHS対応品

対象規格

RoHS

STO(A)/TC LF

STO(A)/TC LF

海外規格ケーブル

海外規格ケーブル

耐 熱 性 ★★★★★耐 油 性 ★★★★★耐ノイズ性 ★難 燃 性 ★★★★★柔 軟 性 ★★★非移行性 ★★★★★移動特性 ★★※特性は目安となります。

Page 28: P040-041 R04-05 [CS3]特徴 Features 構造図 Construction figure 識別 Identification SSX10516 LF UL VW-1の難燃対応。(カテゴリ AVLV2) 絶縁体にフッ素樹脂を使用。

線心数No. of cores サイズ

Size(AWG)

構成Construction(本/mm)

導 体Conductor

耐熱ビニル絶縁体Heat resistant PVC insulation

外径Outside diameter(mm)

厚さThickness(mm)

外径Outside diameter(mm)

概算質量Approx.weight(kg/km)

耐油耐熱柔軟性ビニルシースOil, heat -resistant flexible- PVC sheath厚さ

Thickness(mm)

外径Overall diameter 約approx(mm)

特徴

構造図  Construction figure

構造表  Construction table●

UL、cUL共用。(カテゴリ QPOR、ZJCZ、ZKHZ、ZJCZ7)

UL VW-1、cUL FT1の難燃対応。

UL垂直トレイ難燃試験に合格。

耐油耐熱柔軟性ビニル材料を使用。

トレイケーブルとしても使用可能。

電気用品安全法に適合しています。

Standard UL, cUL.(Category QPOR, ZJCZ, ZKHZ, ZJCZ7)

Flame resisting : UL VW-1, cUL FT1.

It passes Vertical-Tray Flame Test of UL.

Oil, heat resistant and flexible PVC material is used.

It is possible to use it as a tray cable.

It suits Product Safety of Electrical Appliance and Materials.

※線心数表記“E”は、同等サイズの[Y/G]アース線入りとなります。 (例)3E×18AWG:2×18AWG+1×18AWG (アース)

※Core number mark “E” has the [Y/G] earth cable of an equal size.

STO-SB(A)/TC LF

Features

ケーブルトレイ、レースウェイ配線用、電気機器電源用コードFor tray cable, race way and electronic equipment power supply code

E209288(UL)TC 90℃ DRY 75℃ WET or MTW FLEXING VW-1 or STO SHIELDED 105℃ 600V VW-1 線心数×□□AWGc(UL) STO SHIELDED 105℃ 600V 線心数×□□AWG(○○mm2) FT1 TAIYO <PS>E ** LF

表面印字  Surface Marking

2C3E4E2C3E4E2C3E4E2C3E4E2C3E4E

18(0.89㎟)

16(1.34㎟)

14(2.14㎟)

12(3.34㎟)

10(5.27㎟)

35/0.18

53/0.18

84/0.18

66/0.254

104/0.254

1.2

1.5

1.9

2.4

3.1

0.85

0.85

1.25

1.25

1.25

2.9

3.2

4.4

4.9

5.6

1.7

1.7

2.25

2.65

2.65

10.010.411.210.611.212.014.214.916.116.116.918.117.518.419.8

130145170145175205250290355335395470410495600

耐熱PVC絶縁体Heat resistant PVC insulation テープ

Tape

耐油耐熱柔軟性PVCシース(黒色)Oil, heat resistant and flexible PVC sheath(Black)

導体(軟銅より線)Stranded annealed coppers

すずめっき軟銅線編組Tinned annealed copper braid shield

電気特性

・TC、MTW

・STO

サイズSize

(AWG)

導体抵抗Conductor resistance(Ω/km20℃)

絶縁抵抗Insulation resistance(MΩkm20℃)

耐電圧Electrical strength(V/1min.) a

※許容電流(A)Allowable ampacity

b

許容電流

●電流減少係数(周囲温度の場合)/Adjustment factors(at ambient temperature)

301.00

400.91

500.82

600.71

700.58

800.41

90-

100-

●電流減少係数(多条布設の場合)/Adjustment factors(for multiple-line laying)

電 線 数 No. of cables電流減少係数 Adjustment factors

2~30.70

40.63

5~60.56

7~150.49

16~400.43

61~0.34

41~600.39

周 囲 温 度 Ambient temperature(℃)電流減少係数 Adjustment factors

301.00

400.93

500.86

600.77

700.68

800.58

900.45

1000.26

周 囲 温 度 Ambient temperature(℃)電流減少係数 Adjustment factors

Allowable ampacity

Electrical property

・本カタログの許容電流は空中1条布設、周囲温度30℃での値です。

・周囲温度、布設状況等によって下記の補正係数を乗じて下さい。

・The allowable ampacity of this catalog is a value at one in the air construction and the ambient temperature 30℃.

・Please multiply the following correction coefficient by the ambient temperature and the cable-laying conditions, etc.

1816141210

22.614.08.855.553.50

6060605050

20002000300030003000

710152025

1013182530

販売標準長 Standard sale length100m 100m

a:3心及びその他の多心コードで3心のみに電流が流れるコードに適用b:2心及びその他の多心コードで2心のみに電流が流れるコードに適用

※許容電流については、米国電気工事規定(NEC)により

a:Apply to 3-conductor cords and other multiconductor cords connected to utilization equipment so that only 3 conductors are current-carrying.b:Apply to 2-conductor cords and other multiconductor cords connected to utilization equipment so that only 2 conductors are current-carrying.

※Allowable ampacity By National Electrical Code(NEC)

識別  Identification

Y/G

赤 白

4E

Y/G 白

3E

2C

※Y/G線は緑地に黄色の3本埋込色帯(30~50%)となります。/Y/G indicates green core with yellow stripe(30~50%).

認 証 Certification

適合規格 Applicable standard

形式記号 Official symbol

定格電圧 Voltage rating定格温度 Temperature rating

導  体 Conductor

難 燃 性 Flame rating

UL STO

UL 62

STO

600V105℃

UL 62

VW-1

cUL STO

CSA C22.2 No.49

STO

600V105℃

CSA C22.2 No.49

FT1

UL TC

UL 1277

TC

600VDRY90℃ WET75℃

UL 1277

Vertical-Tray Flame Test

UL MTW

UL 1063

MTW

600VDRY90℃ WET60℃

UL 1063

VW-1

電気用品安全法電気用品の技術上の基準を定める省令第1項の別表第一ビニルキャブタイヤコード300V60℃

JIS C 3102

JIS C 3005の4.26.2のb)

表面印字

RoHS対応品

対象規格

RoHS

STO-SB(A)/TC LF

STO-SB(A)/TC LF

海外規格ケーブル

海外規格ケーブル

耐 熱 性 ★★★★★耐 油 性 ★★★★★耐ノイズ性 ★★★難 燃 性 ★★★★★柔 軟 性 ★★★非移行性 ★★★★★移動特性 ★★※特性は目安となります。

Page 29: P040-041 R04-05 [CS3]特徴 Features 構造図 Construction figure 識別 Identification SSX10516 LF UL VW-1の難燃対応。(カテゴリ AVLV2) 絶縁体にフッ素樹脂を使用。

線心数No. of cores サイズ

Size(AWG)

構成Construction(本/mm)

導 体Conductor

耐熱ビニル絶縁体Heat resistant PVC insulation

外径Outside diameter(mm)

厚さThickness(mm)

外径Outside diameter(mm)

概算質量Approx.weight(kg/km)

耐油耐熱柔軟性ビニルシースOil, heat -resistant flexible- PVC sheath厚さ

Thickness(mm)

外径Overall diameter 約approx(mm)

特徴

構造図  Construction figure

構造表  Construction table

識別  Identification

ケーブルトレイ、レースウェイ配線用、電気機器電源用コードFor tray cable, race way and electronic equipment power supply code

テープtape

耐油耐熱柔軟性PVCシース(黒色)Oil, heat resistant and flexible PVC sheath(Black)

UL、cUL共用。(カテゴリ ZJCZ、ZKHZ、QPOR、ZJCZ7)

UL VW-1、cUL FT1の難燃対応。

UL垂直トレイ難燃試験に合格。

耐油耐熱柔軟性ビニル材料を使用。

CEマーキング適合宣言製品(TUV認定品)。(TUV証明書No.J50004167)

トレイケーブルとしても使用可能。

電気用品安全法に適合しています。

耐熱PVC絶縁体heat resistant PVC insulation

電気特性

・TC、MTW

・STO

許容電流

●電流減少係数(周囲温度の場合)/Adjustment factors(at ambient temperature)

301.00

400.91

500.82

600.71

700.58

800.41

90-

100-

●電流減少係数(多条布設の場合)/Adjustment factors(for multiple-line laying)電 線 数 No. of cables電流減少係数 Adjustment factors

2~30.70

40.63

5~60.56

7~150.49

16~400.43

61~0.34

41~600.39

周 囲 温 度 Ambient temperature(℃)電流減少係数 Adjustment factors

301.00

400.93

500.86

600.77

700.68

800.58

900.45

1000.26

周 囲 温 度 Ambient temperature(℃)電流減少係数 Adjustment factors

Allowable ampacity・本カタログの許容電流は空中1条布設、周囲温度30℃での値です。

・周囲温度、布設状況等によって下記の補正係数を乗じて下さい。

・The allowable ampacity of this catalog is a value at one in the air construction and the ambient temperature 30℃.

・Please multiply the following correction coefficient by the ambient temperature and the cable-laying conditions, etc.

※線心数表記“E”は、同等サイズの[Y/G]アース線入りとなります。 (例)3E×18AWG:2×18AWG+1×18AWG (アース)

※Core number mark “E” has the [Y/G] earth cable of an equal size.

導体(軟銅より線)stranded annealed coppers

UE/STO(N)/TC LF

・・・・

Y/G

3 2

1

4E

Y/G 2

1

3E

2

1

2C

1

2

5

43

Y/G

6E

表面印字  Surface Marking(1)18AWG~10AWGの場合/18AWG~10AWG cables

(2)8AWG~2AWGの場合/8AWG~2AWG cables

E209288(UL)TC 90℃ DRY 75℃ WET or MTW FLEXING VW-1 or STO 105℃ 600V VW-1 線心数×□□AWGc(UL) STO 105℃ 600V 線心数×□□AWG(○○mm2) FT1 TAIYO  CE 300/500V <PS>E ** LF

E209288(UL)TC 90℃ DRY 75℃ WET or MTW VW-1 or STO 105℃ 600V VW-1 線心数×□□AWG c(UL) STO 105℃ 600V 線心数×□□AWG(○○mm2) FT1 TAIYO  CE 300/500V <PS>E ** LF

2C3E4E6E2C3E4E6E2C3E4E6E2C3E4E2C3E4E6E3E4E3E4E3E4E3E4E

8(8.44㎟)

6(13.5㎟)

4(21.4㎟)

2(33.8㎟)

7/15/0.32

7/24/0.32

7/38/0.32

7/60/0.32

4.2

5.3

6.6

8.3

1.7

1.7

1.7

1.8

7.6

8.7

10.0

11.9

9.39.710.513.49.910.511.314.313.514.215.318.715.316.117.316.717.619.022.322.825.525.929.029.632.934.438.3

9511513522011513516526020524529543527533040034542552573069089595512301330171019102460

サイズSize

(AWG)181614121086432

22.614.08.855.553.502.261.370.8720.7260.559

60606050505050505040

2000200030003000300040004000400040004000

7101520253545607080

10131825304055708595

5812-20-----

導体抵抗Conductor resistance(Ω/km20℃)

絶縁抵抗Insulation resistance(MΩkm20℃)

①耐電圧Electrical strength(V/1min.) a

②許容電流(A)Allowable ampacity

b c a:3心及びその他の多心コードで3心のみに電流が流れるコードに適用b:2心及びその他の多心コードで2心のみに電流が流れるコードに適用c:5心及びその他の多心コードで5心のみに電流が流れるコードに適用

a:Apply to 3-conductor cords and other multiconductor cords connected to utilization equipment so that only 3 conductors are current-carrying.b:Apply to 2-conductor cords and other multiconductor cords connected to utilization equipment so that only 2 conductors are current-carrying.c:Apply to 5-conductor cords and other multiconductor cords connected to utilization equipment so that only 5 conductors are current-carrying.

②Allowable ampacity By National Electrical Code(NEC)

①上記UL、CSA規格の耐電圧試験の他に2000V/5分間の試験を実施しております。①The examination of 2000V/5 minute besides the withstand voltage test on the UL standard and the CSA standard that has been described to the top is executed,

②許容電流については、米国電気工事規定(NEC)により

18(0.89㎟) 35/0.18 1.2 0.85 2.9 1.7

2.25

16(1.34㎟) 53/0.18 1.5 0.85 3.2 1.7

2.25

14(2.14㎟) 84/0.18 1.9 1.25 4.4

2.25

12(3.34㎟) 66/0.254 2.4 1.25 4.9 2.65

10(5.27㎟) 104/0.254 3.1 1.25 5.6 2.65

3.13.53.53.93.94.34.34.7

2.65

認 証 Certification

適合規格 Applicable standard

形式記号 Official symbol

定格電圧 Voltage rating定格温度 Temperature rating

導  体 Conductor

難 燃 性 Flame rating

UL STO

UL 62

STO

600V105℃

UL 62

VW-1

cUL STO

CSA C22.2 No.49

STO

600V105℃

CSA C22.2 No.49

FT1

UL TC

UL 1277

TC

600VDRY90℃ WET75℃

UL 1277

Vertical-Tray Flame Test

UL MTW

UL 1063

MTW

600VDRY90℃ WET60℃

UL 1063

VW-1

TUV.CEマーキング

HD21.5(IEC60227-5)H05VV-F

(60227 IEC 53)300/500V70℃

HD383 Class 5(IEC60228 Class 5) EN50264-2-1(IEC60332-1)

Features

販売標準長 Standard sale length100m(切断販売が可能なサイズもございます。詳細は窓口にお問い合わせ下さい。)

100m(There are sizes that can be the cutting sales, too. Please inquire of sales staff in detail.)

○内数字は黒色絶縁体上の白色ナンバリングを示す。/Figures in ○ indicate white numbering on black insulator.

※Y/G線は緑地に黄色の3本埋込色帯(30~50%)となります。/Y/G indicates green core with yellow stripe(30~50%).

Standard UL, cUL.(Category ZJCZ, ZKHZ, QPOR, ZJCZ7)

Flame resisting : UL VW-1, cUL FT1.

It passes Vertical-Tray Flame Test of UL.

Oil, heat resistant and flexible PVC material is used.

CE marking(TUV recognition product).(Certificate of TUV No.J50004167)

It is possible to use it as a tray cable.

It suits Product Safety of Electrical Appliance and Materials.

・・・・

Electrical property

対象規格

表面印字

電気用品安全法(18~10AWG)電気用品の技術上の基準を定める省令第1項の別表第一ビニルキャブタイヤコード300V60℃

JIS C 3102

JIS C 3005の4.26.2のb)

電気用品安全法(8~2AWG)電気用品の技術上の基準を定める省令第1項の別表第一ビニルキャブタイヤケーブル600V60℃

JIS C 3102

JIS C 3005の4.26.2のb)

RoHS対応品

・・

RoHS

UE/STO(N)/TC LF

UE/STO(N)/TC LF

海外規格ケーブル

海外規格ケーブル

耐 熱 性 ★★★★★耐 油 性 ★★★★★耐ノイズ性 ★難 燃 性 ★★★★★柔 軟 性 ★★★非移行性 ★★★★★移動特性 ★★※特性は目安となります。

Page 30: P040-041 R04-05 [CS3]特徴 Features 構造図 Construction figure 識別 Identification SSX10516 LF UL VW-1の難燃対応。(カテゴリ AVLV2) 絶縁体にフッ素樹脂を使用。

認 証 Certification

適合規格 Applicable standard

形式記号 Official symbol

定格電圧 Voltage rating定格温度 Temperature rating

導  体 Conductor

難 燃 性 Flame rating

UL TC

UL 1277

TC

600VDRY90℃ WET75℃

UL 1277

Vertical-Tray Flame Test

UL MTW

UL 1063

MTW

600VDRY90℃ WET60℃

UL 1063

VW-1

TUV.CEマーキングHD21.5

(IEC60227-7)H05VV-F相当(60227 IEC 53)300/500V70℃

HD383 Class 5(IEC60228 Class 5) EN50264-2-1(IEC60332-1)

電気用品安全法電気用品の技術上の基準を定める省令第1項の別表第一ビニルキャブタイヤコード300V60℃

JIS C 3102

JIS C 3005の4.26.2のb)

特徴

構造図  Construction figure

構造表  Construction table

識別  Identification

ケーブルトレイ、レースウェイ配線用、電気機器電源用コードFor tray cable, race way and electronic equipment power supply code

電気特性

※線心数表記“E”は、同等サイズの[Y/G]アース線入りとなります。 (例)3E×18AWG:2×18AWG+1×18AWG (アース)

※Core number mark “E” has the [Y/G] earth cable of an equal size.

UE/STO-SB(N)/TC LF

a:3心及びその他の多心コードで3心のみに電流が流れるコードに適用

b:2心及びその他の多心コードで2心のみに電流が流れるコードに適用

a:Apply to 3-conductor cords and other multiconductor cords connected to utilization equipment so that only 3 conductors are current-carrying.b:Apply to 2-conductor cords and other multiconductor cords connected to utilization equipment so that only 2 conductors are current-carrying.

②Allowable ampacity By National Electrical Code(NEC)

①上記UL、CSA規格の耐電圧試験の他に2000V/5分間の試験を実施 しております。

①The examination of 2000V/5 minute besides the withstand voltage test on the UL standard and the CSA standard that has been described to the top is executed,

②許容電流については、米国電気工事規定(NEC)により

表面印字  Surface Marking

E209288(UL)TC 90℃ DRY 75℃ WET or MTW FLEXING VW-1 or STO SHIELDED 105℃ 600V VW-1 線心数×□□AWGc(UL) STO SHIELDED 105℃ 600V 線心数×□□AWG(○○mm2) FT1 TAIYO  CE 300/500V <PS>E ** LF

Y/G

3 2

1

4E

Y/G 2

1

3E

2

1

2C

線心数No. of cores サイズ

Size(AWG)

2C3E4E2C3E4E2C3E4E2C3E4E

18(0.89㎟)

16(1.34㎟)

14(2.14㎟)

12(3.34㎟)

構成Construction(本/mm)

導 体Conductor

耐熱ビニル絶縁体Heat resistant PVC insulation

35/0.18

53/0.18

84/0.18

66/0.254

外径Outside diameter(mm)

1.2

1.5

1.9

2.4

厚さThickness(mm)

0.85

0.85

1.25

1.25

外径Outside diameter(mm)

概算質量Approx.weight(kg/km)

2.9

3.2

4.4

4.9

耐油耐熱柔軟性ビニルシースOil, heat -resistant flexible- PVC sheath厚さ

Thickness(mm)

1.7

1.7

2.25

2.65

外径Overall diameter 約approx(mm)

10.010.411.210.611.212.014.214.916.116.116.918.1

130145170145175205250290355335395470

サイズSize

(AWG)18161412

22.614.69.135.70

60606050

2000200030003000

7101520

10131825

導体抵抗Conductor resistance(Ω/km20℃)

絶縁抵抗Insulation resistance(MΩkm20℃)

①耐電圧Electrical strength(V/1min.) a

②許容電流(A)Allowable ampacity

b

UL STO.cUL STOUL 62

CSA C22.2 No.49

STO

600V105℃UL 62

CSA C22.2 No.49VW-1.FT1

Features

耐熱PVC絶縁体Heat resistant PVC insulation

テープTape

耐油耐熱柔軟性PVCシース(黒色)Oil, heat resistant and flexible PVC sheath(Black)

導体(軟銅より線)Stranded annealed coppers

すずめっき軟銅線編組Tinned annealed copper braid shield

RoHS

・TC

・STO

許容電流

●電流減少係数(周囲温度の場合)/Adjustment factors(at ambient temperature)

301.00

400.91

500.82

600.71

700.58

800.41

90-

100-

●電流減少係数(多条布設の場合)/Adjustment factors(for multiple-line laying)

電 線 数 No. of cables電流減少係数 Adjustment factors

2~30.70

40.63

5~60.56

7~150.49

16~400.43

61~0.34

41~600.39

周 囲 温 度 Ambient temperature(℃)電流減少係数 Adjustment factors

301.00

400.93

500.86

600.77

700.68

800.58

900.45

1000.26

周 囲 温 度 Ambient temperature(℃)電流減少係数 Adjustment factors

Allowable ampacity・本カタログの許容電流は空中1条布設、周囲温度30℃での値です。

・周囲温度、布設状況等によって下記の補正係数を乗じて下さい。

・The allowable ampacity of this catalog is a value at one in the air construction and the ambient temperature 30℃.

・Please multiply the following correction coefficient by the ambient temperature and the cable-laying conditions, etc.

販売標準長 Standard sale length100m 100m

○内数字は黒色絶縁体上の白色ナンバリングを示す。/Figures in ○ indicate white numbering on black insulator.

※Y/G線は緑地に黄色の3本埋込色帯(30~50%)となります。/Y/G indicates green core with yellow stripe(30~50%).

UL、cUL共用。

UL VW-1、cUL FT1の難燃対応。

UL垂直トレイ難燃試験に合格。

耐油耐熱柔軟性ビニル材料を使用。

CEマーキング適合宣言製品(TUV認定品)。(※H05VV-Fをベースとした遮蔽付ケーブルとして認定)(TUV証明書No.J2050492)

トレイケーブルとしても使用可能。

電気用品安全法に適合しています。

・・

・・

Standard UL, cUL.

Flame resisting : UL VW-1, cUL FT1.

It passes Vertical-Tray Flame Test of UL.

Oil, heat resistant and flexible PVC material is used.

CE marking(TUV recognition product).(※It is recognized as a cable with the cover based on H05VV-F)(Certificate of TUV No.J2050492)

It is possible to use it as a tray cable.

It suits Product Safety of Electrical Appliance and Materials.

対象規格

Electrical property

表面印字

・・

・・

RoHS対応品

・・UE/STO-SB(N)/TC LF

UE/STO-SB(N)/TC LF

海外規格ケーブル

海外規格ケーブル

耐 熱 性 ★★★★★耐 油 性 ★★★★★耐ノイズ性 ★★★難 燃 性 ★★★★★柔 軟 性 ★★★非移行性 ★★★★★移動特性 ★★※特性は目安となります。

Page 31: P040-041 R04-05 [CS3]特徴 Features 構造図 Construction figure 識別 Identification SSX10516 LF UL VW-1の難燃対応。(カテゴリ AVLV2) 絶縁体にフッ素樹脂を使用。

サイズSize

(AWG)

導体抵抗Conductor resistance(Ω/km20℃)

絶縁抵抗Insulation resistance(MΩkm20℃)

①耐電圧Electrical strength(V/1min.)

②許容電流(A)Allowable ampacity

線心数No. of cores サイズ

Size(AWG)

構成Construction(本/mm)

導 体Conductor

耐熱ビニル絶縁体Heat resistant PVC insulation

外径Outside diameter(mm)

厚さThickness(mm)

外径Outside diameter(mm)

概算質量Approx.weight(kg/km)

耐油耐熱柔軟性ビニルシースOil, heat -resistant flexible- PVC sheath厚さ

Thickness(mm)

外径Overall diameter 約approx(mm)

特徴

構造図  Construction figure

構造表  Construction table

識別  Identification

ケーブルトレイ、レースウェイ配線用、電気機器電源用コードFor tray cable, race way and electronic equipment power supply code

電気特性

※線心数表記“E”は、同等サイズの[Y/G]アース線入りとなります。 (例)3E×10AWG:2×10AWG+1×10AWG (アース)

※Core number mark “E” has the [Y/G] earth cable of an equal size.

UE/STO-SB(N)/TC LF

Y/G

3 2

1

4E

Y/G 2

1

3E

2

1

2C

表面印字  Surface Marking

E209288(UL)TC 90℃ DRY 75℃ WET or MTW FLEXING VW-1 or STO SHIELDED 105℃ 600V VW-1 線心数×□□AWGc(UL) STO SHIELDED 105℃ 600V 線心数×□□AWG(○○mm2) FT1 TAIYO CE 300/500V <PS>E ** LF

(1)10AWGの場合/10AWG cables

(2)8AWG~6AWGの場合/8AWG~6AWG cables

E209288(UL)TC 90℃ DRY 75℃ WET or MTW VW-1 or STO SHIELDED 105℃ 600V VW-1 線心数×□□AWG c(UL) STO SHIELDED 105℃ 600V 線心数×□□AWG(○○mm2) FT1 TAIYO CE 300/500V <PS>E ** LF

2C3E4E2C3E4E3E4E

3.53.53.9

17.518.419.822.924.126.827.230.3

410495600700840106011301420

1086

3.502.261.37

505050

300040004000

253545

304055

a b

10(5.27㎟) 104/0.254 3.1 1.25 5.6

8(8.44㎟) 7/15/0.32 4.2 1.7 7.6

6(13.5㎟) 7/24/0.32 5.3 1.7 8.7

2.65

3.1

Features

耐熱PVC絶縁体Heat resistant PVC insulation

テープTape

耐油耐熱柔軟性PVCシース(黒色)Oil, heat resistant and flexible PVC sheath(Black)

導体(軟銅より線)Stranded annealed coppers

すずめっき軟銅線編組Tinned annealed copper braid shield

・TC

・STO

許容電流

●電流減少係数(周囲温度の場合)/Adjustment factors(at ambient temperature)

301.00

400.91

500.82

600.71

700.58

800.41

90-

100-

●電流減少係数(多条布設の場合)/Adjustment factors(for multiple-line laying)

電 線 数 No. of cables電流減少係数 Adjustment factors

2~30.70

40.63

5~60.56

7~150.49

16~400.43

61~0.34

41~600.39

周 囲 温 度 Ambient temperature(℃)電流減少係数 Adjustment factors

301.00

400.93

500.86

600.77

700.68

800.58

900.45

1000.26

周 囲 温 度 Ambient temperature(℃)電流減少係数 Adjustment factors

Allowable ampacity・本カタログの許容電流は空中1条布設、周囲温度30℃での値です。

・周囲温度、布設状況等によって下記の補正係数を乗じて下さい。

・The allowable ampacity of this catalog is a value at one in the air construction and the ambient temperature 30℃.

・Please multiply the following correction coefficient by the ambient temperature and the cable-laying conditions, etc.

a:3心及びその他の多心コードで3心のみに電流が流れるコードに適用

b:2心及びその他の多心コードで2心のみに電流が流れるコードに適用

a:Apply to 3-conductor cords and other multiconductor cords connected to utilization equipment so that only 3 conductors are current-carrying.b:Apply to 2-conductor cords and other multiconductor cords connected to utilization equipment so that only 2 conductors are current-carrying.

②Allowable ampacity By National Electrical Code(NEC)

①上記UL、CSA規格の耐電圧試験の他に2000V/5分間の試験を実施 しております。

①The examination of 2000V/5 minute besides the withstand voltage test on the UL standard and the CSA standard that has been described to the top is executed,

②許容電流については、米国電気工事規定(NEC)により

販売標準長 Standard sale length100m 100m

認 証 Certification

適合規格 Applicable standard

形式記号 Official symbol

定格電圧 Voltage rating定格温度 Temperature rating

導  体 Conductor

難 燃 性 Flame rating

UL TC

UL 1277

TC

600VDRY90℃ WET75℃

UL 1277

Vertical-Tray Flame Test

UL MTW

UL 1063

MTW

600VDRY90℃ WET60℃

UL 1063

VW-1

CEマーキング

HD21.5(IEC60227-7)H05VV-F

(60227 IEC 53)300/500V70℃

HD383 Class 5(IEC60228 Class 5) EN50264-2-1(IEC60332-1)

電気用品安全法(10AWGのみ)電気用品の技術上の基準を定める省令第1項の別表第一ビニルキャブタイヤコード300V60℃

JIS C 3102

JIS C 3005の4.26.2のb)

電気用品安全法(8~6AWG)電気用品の技術上の基準を定める省令第1項の別表第一ビニルキャブタイヤケーブル600V60℃

JIS C 3102

JIS C 3005の4.26.2のb)

UL STO.cUL STO

UL 62CSA C22.2 No.49

STO

600V105℃UL 62

CSA C22.2 No.49VW-1.FT1 RoHS

対象規格

○内数字は黒色絶縁体上の白色ナンバリングを示す。/Figures in ○ indicate white numbering on black insulator.

※Y/G線は緑地に黄色の3本埋込色帯(30~50%)となります。/Y/G indicates green core with yellow stripe(30~50%).

UL、cUL共用。(カテゴリ QPOR、ZJCZ、ZKHZ、ZJCZ7)

UL VW-1、cUL FT1の難燃対応。

UL垂直トレイ難燃試験に合格。

耐油耐熱柔軟性ビニル材料を使用。

CEマーキング適合宣言製品。

トレイケーブルとしても使用可能。

電気用品安全法に適合しています。

Standard UL, cUL.(Category QPOR, ZJCZ, ZKHZ, ZJCZ7)

Flame resisting : UL VW-1, cUL FT1.

It passes Vertical-Tray Flame Test of UL.

Oil, heat resistant and flexible PVC material is used.

CE marking.

It is possible to use it as a tray cable.

It suits Product Safety of Electrical Appliance and Materials.

Electrical property

表面印字

RoHS対応品

UE/STO-SB(N)/TC LF

UE/STO-SB(N)/TC LF

海外規格ケーブル

海外規格ケーブル

耐 熱 性 ★★★★★耐 油 性 ★★★★★耐ノイズ性 ★★★難 燃 性 ★★★★★柔 軟 性 ★★★非移行性 ★★★★★移動特性 ★★※特性は目安となります。

Page 32: P040-041 R04-05 [CS3]特徴 Features 構造図 Construction figure 識別 Identification SSX10516 LF UL VW-1の難燃対応。(カテゴリ AVLV2) 絶縁体にフッ素樹脂を使用。

線心数No. of cores サイズ

Size(AWG)

構成Construction(本/mm)

導 体Conductor

耐熱ビニル絶縁体Heat resistant PVC insulation

外径Outside diameter(mm)

厚さThickness(mm)

外径Outside diameter(mm)

概算質量Approx.weight(kg/km)

耐油耐熱柔軟性ビニルシースOil, heat -resistant flexible- PVC sheath厚さ

Thickness(mm)

外径Overall diameter 約approx(mm)

特徴

構造図  Construction figure

STOW(A)LF

構造表  Construction table

識別  Identification

電気機器電源用コードFor electronic equipment power supply code

UL、cUL共用。

UL VW-1、cUL FT1の難燃対応。

耐油耐熱柔軟性ビニル材料を使用。

湿気のある場所に使用可能。

Standard UL, cUL.

Flame resisting : UL VW-1, cUL FT1.

Oil, heat resistant and flexible PVC material is used.

It is possible to use it for a moist place.

電気特性

※線心数表記“E”は、同等サイズの[Y/G]アース線入りとなります。 (例)3E×18AWG:2×18AWG+1×18AWG (アース)

※Core number mark “E” has the [Y/G] earth cable of an equal size.

Y/G

赤 白

4E

Y/G 白

3E

2C

表面印字  Surface Marking

E65955(UL)STOW 105℃ 600V 線心数×□□AWG VW-1 OUTDOOR WATER RESISTANT TAIYOc(UL)STOW 105℃ 600V 線心数×□□AWG(○○mm2) FT1 WATER RESISTANT TAIYO <PS>E ** LF

2C3E4E2C3E4E2C3E4E2C3E4E2C3E4E3E4E2C3E4E3E4E3E4E

18(0.89㎟)

16(1.34㎟)

14(2.14㎟)

12(3.34㎟)

35/0.18

53/0.18

84/0.18

66/0.254

1.2

1.5

1.9

2.4

0.85

0.85

1.25

1.25

2.9

3.2

4.4

4.9

1.7

1.7

2.25

2.65

9.39.710.59.910.511.313.514.215.315.316.117.316.717.619.022.825.524.625.929.029.632.934.438.3

9511513511513516520524529527533040034542552569089576595512401340172019102460

サイズSize

(AWG)18161412108642

22.614.68.855.553.502.261.370.8720.559

524550403434292420

200020003000300030004000400040004000

71015202535456080

101318253040557095

導体抵抗Conductor resistance(Ω/km20℃)

絶縁抵抗Insulation resistance(MΩkm15℃)

①耐電圧Electrical strength(V/1min.) a

②許容電流(A)Allowable ampacity

b

3.93.94.34.34.7

10(5.27㎟) 104/0.254 3.1 1.25 5.6

8(8.44㎟) 7/15/0.32 4.2 1.7 7.6

6(13.5㎟) 7/24/0.32 5.3 1.7 8.7

4(21.4㎟) 7/38/0.32 6.6 1.7 10.0

2(33.8㎟) 7/60.0.32 8.3 1.8 11.9

2.65

3.5

3.13.5

Features

耐熱PVC絶縁体Heat resistant PVC insulation テープ

Tape

耐油耐熱柔軟性PVCシース(黒色)Oil, heat resistant and flexible PVC sheath(Black)

導体(軟銅より線)Stranded annealed coppers

認 証 Certification

適合規格 Applicable standard

形式記号 Official symbol定格電圧 Voltage rating定格温度 Temperature rating導  体 Conductor難 燃 性 Flame rating

UL STOW

UL 62

STOW600V105℃UL 62VW-1 RoHS

対象規格

cUL STOW

CSA C22.2 No.49

STOW600V105℃

CSA C22.2 No.49FT1

・STOW

許容電流

●電流減少係数(周囲温度の場合)/Adjustment factors(at ambient temperature)

●電流減少係数(多条布設の場合)/Adjustment factors(for multiple-line laying)

電 線 数 No. of cables電流減少係数 Adjustment factors

2~30.70

40.63

5~60.56

7~150.49

16~400.43

61~0.34

41~600.39

301.00

400.93

500.86

600.77

700.68

800.58

900.45

1000.26

周 囲 温 度 Ambient temperature(℃)電流減少係数 Adjustment factors

Allowable ampacity・本カタログの許容電流は空中1条布設、周囲温度30℃での値です。

・周囲温度、布設状況等によって下記の補正係数を乗じて下さい。

・The allowable ampacity of this catalog is a value at one in the air construction and the ambient temperature 30℃.

・Please multiply the following correction coefficient by the ambient temperature and the cable-laying conditions, etc.

a:3心及びその他の多心コードで3心のみに電流が流れるコードに適用b:2心及びその他の多心コードで2心のみに電流が流れるコードに適用

※許容電流については、米国電気工事規定(NEC)により

a:Apply to 3-conductor cords and other multiconductor cords connected to utilization equipment so that only 3 conductors are current-carrying.b:Apply to 2-conductor cords and other multiconductor cords connected to utilization equipment so that only 2 conductors are current-carrying.

※Allowable ampacity By National Electrical Code(NEC)

販売標準長 Standard sale length受注生産品(生産ロットにつきましては営業窓口にお問い合わせください。)

Order production(Please inquire of Sales Department about the production lot.)

※Y/G線は緑地に黄色の3本埋込色帯(30~50%)となります。/Y/G indicates green core with yellow stripe(30~50%).

Electrical property

表面印字

電気用品安全法(18~10AWG)電気用品の技術上の基準を定める省令第1項の別表第一ビニルキャブタイヤコード

300V60℃

JIS C 3102 JIS C 3005の4.26.2のb)

電気用品安全法(8~2AWG)

電気用品の技術上の基準を定める省令第1項の別表第一ビニルキャブタイヤケーブル

600V60℃

JIS C 3102 JIS C 3005の4.26.2のb)

RoHS対応品

STOW(A)LF

STOW(A)LF

海外規格ケーブル

海外規格ケーブル

耐 熱 性 ★★★★★耐 油 性 ★★★★★耐ノイズ性 ★難 燃 性 ★★★★★柔 軟 性 ★★★非移行性 ★★★★★移動特性 ★★※特性は目安となります。

Page 33: P040-041 R04-05 [CS3]特徴 Features 構造図 Construction figure 識別 Identification SSX10516 LF UL VW-1の難燃対応。(カテゴリ AVLV2) 絶縁体にフッ素樹脂を使用。

サイズSize

(AWG)

導体抵抗Conductor resistance(Ω/km20℃)

絶縁抵抗Insulation resistance(MΩkm20℃)

①耐電圧Electrical strength(V/1min.) a

②許容電流(A)Allowable ampacity

b

特徴

構造図  Construction figure

Features

SE/ST(N)LF

識別  Identification

電気機器電源用環境型コードFor environmental electronic equipment power supply code

難燃TPEシース(黒色)TPE sheath(Black)

UL、cUL共用。(カテゴリ ZJCZ、ZJCZ7)

環境に配慮した材料設計をしております。

アウトガス発生を抑制した仕様になっており、クリーンルーム内での使用に適しております。

NEC規格品です。

本製品は非鉛、ノンハロゲン仕様となります。

低発煙性。

耐寒性に優れております。

Standard UL, cUL.(Category ZJCZ, ZJCZ7)

It designs by using the material that considers the environment.

It is a specification that controls the out gas generation, and it is suitable for use in cleanroom.

It is NEC standard product.

This product becomes non-lead and no halogen specification.

Low smoke evolution.

Excels in the low temperature resistance.

TPE絶縁体TPE insulation

Y/G

3 2

1

4E

Y/G 2

1

3E

2

1

2C

構造表  Construction table

※線心数表記“E”は、同等サイズの[Y/G]アース線入りとなります。 (例)3E×18AWG:2×18AWG+1×18AWG (アース)

※Core number mark “E” has the [Y/G] earth cable of an equal size.

線心数No. of cores サイズ

Size(AWG)

2C3E4E2C3E4E2C3E4E2C3E4E2C3E4E

18(0.89㎟)

16(1.34㎟)

14(2.14㎟)

12(3.34㎟)

10(5.27㎟)

構成Construction(本/mm)

導 体Conductor

TPE絶縁体TPE insulation

35/0.18

53/0.18

84/0.18

66/0.254

104/0.254

外径Outside diameter(mm)

1.2

1.5

1.9

2.4

3.1

厚さThickness(mm)

0.85

0.85

1.25

1.25

1.25

外径Outside diameter(mm)

概算質量Approx.weight(kg/km)

2.9

3.2

4.4

4.9

5.6

難燃TPEシースTPE sheath

厚さThickness(mm)

1.7

1.7

2.25

2.65

2.65

外径Overall diameter 約approx(mm)

9.39.710.59.910.511.313.514.215.315.316.117.316.717.619.0

90110130110130160195225280260320390340415510

E65955(UL)SE 105℃ 600V 線心数×□□AWG TAIYO c(UL)ST 105℃ 600V 線心数×□□AWG(○○mm2) FT2 TPE TAIYO LF

表面印字  Surface Marking

テープTape

導体(軟銅より線)Stranded annealed coppers

認 証 Certification適合規格 Applicable standard形式記号 Official symbol定格電圧 Voltage rating定格温度 Temperature rating導  体 Conductor難 燃 性 Flame rating

UL SEUL 62SE600V105℃UL 62Horizontal

cUL STCSA C22.2 No.49

ST600V105℃

CSA C22.2 No.49FT2 RoHS

対象規格

電気特性

1816141210

22.614.69.135.703.65

6060605050

20002000300030003000

710152025

1013182530

許容電流

●電流減少係数(周囲温度の場合)/Adjustment factors(at ambient temperature)301.00

400.93

500.86

600.77

700.68

800.58

900.45

1000.26

●電流減少係数(多条布設の場合)/Adjustment factors(for multiple-line laying)電 線 数 No. of cables電流減少係数 Adjustment factors

2~30.70

40.63

5~60.56

7~150.49

16~400.43

61~0.34

41~600.39

周 囲 温 度 Ambient temperature(℃)電流減少係数 Adjustment factors

Allowable ampacity・本カタログの許容電流は空中1条布設、周囲温度30℃での値です。

・周囲温度、布設状況等によって下記の補正係数を乗じて下さい。

・The allowable ampacity of this catalog is a value at one in the air construction and the ambient temperature 30℃.

・Please multiply the following correction coefficient by the ambient temperature and the cable-laying conditions, etc.

a:Apply to 3-conductor cords and other multiconductor cords connected to utilization equipment so that only 3 conductors are current-carrying.b:Apply to 2-conductor cords and other multiconductor cords connected to utilization equipment so that only 2 conductors are current-carrying.

②Allowable ampacity By National Electrical Code(NEC)

①The examination of 2000V/5 minute besides the withstand voltage test on the UL standard and the CSA standard that has been described to the top is executed,

a:3心及びその他の多心コードで3心のみに電流が流れるコードに適用

b:2心及びその他の多心コードで2心のみに電流が流れるコードに適用

①上記UL、CSA規格の耐電圧試験の他に2000V/5分間の 試験を実施しております。

②許容電流については、米国電気工事規定(NEC)により

販売標準長 Standard sale length受注生産品(生産ロットにつきましては営業窓口にお問い合わせください。)

Order production(Please inquire of Sales Department about the production lot.)

○内数字は黒色絶縁体上の白色ナンバリングを示す。/Figures in ○ indicate white numbering on black insulator.

※Y/G線は緑地に黄色の3本埋込色帯(30~50%)となります。/Y/G indicates green core with yellow stripe(30~50%).

Electrical property

表面印字

ハロゲン含有量(%)Halogen content

発煙量DmSmoke opacity

燃焼発生ガス(PH)Acid gas evolution

酸素指数Oxygen index

絶縁体Insulation

0%

105

3.5以上

シースSheath

0%

110

3.5以上

27

試験方法Method of test

--

ASTM E 662(NBS法)

JCS397A

JIS K 7201

材料特性

RoHS対応品

環境対応型ケーブル(ノンハロゲン仕様)SE/ST(N)LF

SE/ST(N)LF

海外規格ケーブル

海外規格ケーブル

耐 熱 性 ★★★★★耐 油 性 ★★★★★耐ノイズ性 ★難 燃 性 ★★★★柔 軟 性 ★★非移行性 ★★★★★移動特性 ★※特性は目安となります。