overview long-line equipment › wp-content › uploads › ...din 11023 (quick connect) purpose /...
TRANSCRIPT
-
Overview Long-Line Equipment
SWISS ROTOR SOLUTIONS AGBetelriedgasse 1aCH-3771 BlankenburgTel. +41 33 657 7000Fax +41 33 657 [email protected] www.swissrotorsolutions.ch
swissrotorsolutions
Fitting in accordanceto specific primarycargo hook
Non-Electrical Adapter / Connector3’000 lb / 1’500 kg or11’000 lb / 5’000 kge.g. for non electricalsecundary cargo hook
Swivel3’300 lb /1’500 kg or11’000 lb /5’000 kg
Goggel / Connection 3’300 lb / 1’500 kg or11’000 lb / 5’000 kg
Electr. + Non-ElectricLonglines Length 2 – 60m (6 – 200ft)Load 500 – 10’000 kg(1’100 – 22’000 lbs)
Quickconnectbolt
Damper(shockabsorber)
Logging -Longline
Castedrope end
Electrical Adapter / Connector3’300 lb / 1’500 kg or 11’000 lb / 5’000 kge.g. for connectingtwo long-lines or toadapt add. Equipmentlike water bucket
add. Equipment
Nubbin type ,doublecargo hook’ 6’600 lb /3’000 kg for logging
Secundary Cargo Hook3’300 lb / 1’500 kg or11’000 lb / 5’000 kg
Swiss Rotor Services AG Winterhaldenstrasse 14 ACH-3627 [email protected]
-
DETAILSNo uncovered or protruding cables and plug connections in the area betweenswivel and cargo hook No "plum-shaped" parts of ropewhich could prove critical with regard to aerodynamics Top section: Connection deviceadjusted to your particular primarycargo hook (Helicopter side)Lower section: sealed rope end withround-thimble standardized for Cone Type 1200 (other equipment accordingyour request)Drill-hole 16 mm (Pin connection within Cone Type 1200 to Swivel Type 1200)Lengths from 5 to 50 m (16 to 160 ft)available, other lengths on demandPayload from 0.5 To (1’100 lb) to 1.4 To(3’100 lb) according your demand
In compliance with -EC MSD 2006/42/EC
Price depends on payload and ropelength required; on demand
Technical Data TLP_14Helicopter Logging & Transport Long-Linewith Electrical Cargo Hook ReleasePROVED IN DEMANDING LIFT OPERATIONS SINCE 1992(AS350 TYPES, SA315B, BELL407, A119)
PURPOSE / DESCRIPTIONThe electrical Logging & Transport Long-Line stands for highest performance.It is proved in 2’000 h of transport without maintenance required! Its excellentaerodynamic characteristics avoid tail rotor contact in fast flights. Apartfrom lifting purposes, it also acts as protection for ground personnel fromdown wash and provides the necessary distance from obstacles. We recommend to add the Damper (VM-DP_14) between the Helicopterand the rope for shock absorbing reasons. The rope end is attached to theCone Type 1200.In order to release a secondary cargo hook, a transmission cable (Helicopterside) for the electric impulse is needed (usually < 16 Amps /< 28 V).
Swiss Rotor Services AG Winterhaldenstrasse 14 ACH-3627 [email protected]
-
DETAILSNo uncovered or protruding cables and plug connections in the area between swivel and cargo hook No "plum-shaped" parts of rope whichcould prove critical with regard toaerodynamics Top section: Connection device adjusted to your particular primary cargo hook (Helicopter side)Lower section: sealed rope end with round-thimble standardized for Cone Type 1200 (other equipment according your request)Drill-hole 16 mm (Pin connection within Cone Type 1200 to Swivel Type 1200)Lengths from 5 to 50 m (16 to 160 ft) available, other lengths on requestPayload from 0.5 To (1’100 lb) to 1.4 To (3’100 lb) according your demandIn compliance with
-EC MSD 2006/42/ECRestriction: Logging only with additional protection cover (tube, tape, or similar)Price depends on payload and rope length required; on demand
Technical Data TLL_14Helicopter Transport & Construction Long-Line with Electrical Cargo Hook ReleasePROVED IN DEMANDING LIFT OPERATIONS SINCE 1992(AS350 TYPES, SA315B, BELL407, A119)
PURPOSE / DESCRIPTION The electrical Transport & Construction Long-Line stands for highestperformance. It is proved in 2’000 h of transport without maintenancerequired! Its excellent aerodynamic characteristics avoid tail rotor con-tact in fast flights. Apart from lifting purposes, it also acts as protectionfor ground personnel from down wash and provides the necessarydistance from obstacles. The rope end is attached to the Cone Type 1200. In order to release asecondary cargo hook, a transmission cable (Helicopter side) for theelectric impulse is needed (usually < 16 Amps /< 28 V).
Swiss Rotor Services AG Winterhaldenstrasse 14 ACH-3627 [email protected]
-
DETAILSNo uncovered or protruding cables andplug connections in the area between swivel and cargo hook No "plum-shaped" parts of rope whichcould prove critical with regard toaerodynamics Top section: Connection device adjusted to your particular primary cargo hook (Helicopter side)Lower section: sealed rope end with round-thimble standardized for Cone Type 4500 (other equipment according your request)Drill-hole 26 mm (Pin connection within Cone Type 4500 to Swivel Type 4500)Lengths from 5 to 50 m (16 to 160 ft) available, other lengths on requestPayload from 1.4 To (3’100 lb) to 5.0 To (11’000 lb) according your demandIn compliance with
-EC MSD 2006/42/ECRestriction: Logging only with additional protection cover (tube, tape, or similar)Price depends on payload and rope length required; on demand
Technical Data TLL_50Helicopter Transport & Construction Long-Line with Electrical Cargo Hook Release PROVED IN HEAVY LIFT OPERATIONS SINCE 1992(K-1200 K-MAX, AS332C1 SUPER PUMA, KA-32 KAMOV, EC225)
PURPOSE / DESCRIPTION The electrical Transport & Construction Long-Line stands for highestperformance. It is proved in 2’000 h of transport without maintenancerequired! Its excellent aerodynamic characteristics avoid tail rotor con-tact in fast flights. Apart from lifting purposes, it also acts as protectionfor ground personnel from down wash and provides the necessarydistance from obstacles. The rope end is attached to the Cone Type 4500. In order to release asecondary cargo hook, a transmission cable (Helicopter side) for theelectric impulse is needed (usually < 16 Amps /< 28 V).
Swiss Rotor Services AG Winterhaldenstrasse 14 ACH-3627 [email protected]
-
DETAILSNo uncovered or protruding cables and plug connections in the area between swivel and cargo hook No "plum-shaped" parts of rope which could prove critical with regard to aerodynamics Top section: Connection device adjusted to your particular primary cargo hook (Helicopter side)Lower section: sealed rope end with round-thimble standardized for Cone Type 4500 (other equipment according your request)Drill-hole 26 mm (Pin connection within Cone Type 4500 to Swivel Type 4500)Lengths from 5 to 50 m (16 to 160 ft) available, other lengths on requestPayload from 1.4 To (3’100 lb) to 5.0 To (11’000 lb) according your demandIn compliance with
-EC MSD 2006/42/ECPrice depends on payload and rope length required; on demand
Technical Data TLP_50 Helicopter Logging & Transport Long-Linewith Electrical Cargo Hook ReleasePROVED IN HEAVY LIFT OPERATIONS SINCE 1992(K-1200 K-MAX, AS332C1 SUPER PUMA, KA-32 KAMOV, EC225)
PURPOSE / DESCRIPTION The electrical Logging & Transport Long-Line stands for highest performance. It is proved in 2’000 h of transport without maintenancerequired! Its excellent aerodynamic characteristics avoid tail rotor contactin fast flights. Apart from lifting purposes, it also acts as protection forground personnel from down wash and provides the necessary distancefrom obstacles. We recommend to add the Damper (VM-DP_50) between the Heli -copter and the rope for shock absorbing reasons. The rope end is attachedto the Cone Type 4500.In order to release a secondary cargo hook, a transmission cable (Helicopterside) for the electric impulse is needed (usually < 16 Amps /< 28 V).
Swiss Rotor Services AG Winterhaldenstrasse 14 ACH-3627 [email protected]
-
DETAILS
Dimensions according to drawing DG.45.100.B
Weight 7kg (15,4 lb)
Working load 5’000 kg (11’000 lb)
Ultimate load 30’000 kg (66’000 lb)
Radial and axial ball bearing
Bearings sealed
Simple and robust design
No special tools required for maintenance
Quick-Connect-System
Robust slip ring with three or four contacts of 16 ampere each 250 V
Single or double hook operation
Technical Data Swivel Type 4500 PROVED IN HEAVY LIFT OPERATIONS SINCE 2001 (AS332 SUPER PUMA / KA-32 KAMOV / EC225)
PURPOSE / DESCRIPTIONFixed on top of the cargo hook, the Swivel Type 4500 functions as theconnection to the Cone Type 4500 (endpiece of longline) and allows theload to rotate in order to prevent the longline from damage. It is suitablefor helicopters up to a maximum 5’000 kg (11’000 lb) load capacity.
Swiss Rotor Services AG Winterhaldenstrasse 14 ACH-3627 [email protected]
-
Technical Data Cargo Hook LH-60 PROVED IN HEAVY LIFT OPERATIONS SINCE 2001 (AS332 SUPER PUMA / KA-32 KAMOV / EC225)
DETAILS
Dimensions according to drawingLH.60.700
Weight 43 kg (95 lb)
Working load 6,000 kg (13’200 lb)
Release load 12 kg (26 lb)
Keeper lock weight 200 kg (440 lb)
Permanent magnetic lock
Mechanical keeper lock
Worldwide first single cargo hookwith EC type examination
Meets highest safety standards
One side yellow, opposite side red to recognize rotation easily
Certification according to 2006 /42 /EG and EASA / CS 27.865
SuvaPro CERTIFICATION, SCESp 008 / NB1246 EG-BMB No E 6832 /1
United States patent No US 8,016,333 B2
European patents No 2036849, 602007017731.6, 2036849, 2036849
PURPOSE / DESCRIPTIONMore than 3’000 hours of operation with no unintended openings confirmthe LH-60 to be the most reliable lower cargo hook on the market.Attached to the Swivel Type 4500, the LH-60 is able to rotate, whichexpands its functional use. The worldwide first singe cargo hook withEC type examination is designed for pilot induced openings only.Furthermore, the high intensity light fastened on top of the hook allowsthe pilot to see if the hook is open or closed. Thus, the LH-60 willincrease safety and reliability – the main factors in a demandinghelicopter sling load market.
Swiss Rotor Services AG Winterhaldenstrasse 14 ACH-3627 [email protected]
-
Technical Data Cone Type 4500PROVED IN HEAVY LIFT OPERATIONS SINCE 2001 (AS332 SUPER PUMA / KA-32 KAMOV / EC225)
DETAILS
Dimensions according to drawing GO.45.100.A
Weight 3,9 kg (8,6 lb)
Aluminum end for most long lines
Protection cap for swivel Type 4500
Integrated electric contact for swivel Type 4500
Highly shock resistant material
Bolt incl. safety pin according to DIN 11023 (quick connect)
PURPOSE / DESCRIPTION The «Cone Type 4500» is fixed firmly to the long line and functions primarilyas the end piece of the long line and secondly as the housing of thecounterpart to the «Swivel Type 4500», which is attached to the cargohook. The two color design (yellow/red) allows easy recognition of properfunction of the Swivel. It is suitable for helicopters up to a maxi-mum 5’000 kg (11’000 lb) load capacity.
Swiss Rotor Services AG Winterhaldenstrasse 14 ACH-3627 [email protected]
-
Technical Data Cone Type 1200PROVED IN DEMANDING LIFT OPERATIONS SINCE 2008 (AS350TYPES, SA315, BELL407)
DETAILS
Dimensions according to drawingGO.12.100
Weight 2,3 kg (5,1 lb)
Aluminum end for most long lines
Protection cap for swivel
Integrated electric contact for swivel Type 1200
Highly shock resistant material
Bolt incl. safety pin according to DIN 11023 (quick connect)
PURPOSE / DESCRIPTION The «Cone Type 1200» is fixed firmly to the long line and functions primarilyas the end piece of the long line and secondly as the housing of thecounterpart to the «Swivel Type 1200», which is attached to the cargohook. The two color design (yellow/red) allows easy recognition of properfunction of the Swivel. It is suitable for helicopters up to a maxi-mum 1’500 kg (3’300 lb) load capacity.
Swiss Rotor Services AG Winterhaldenstrasse 14 ACH-3627 [email protected]
-
Technical DataConnector / Adapter Type 4500PROVED IN HEAVY LIFT OPERATIONS SINCE 2011 (AS332 SUPER PUMA / KA-32 KAMOV / EC225)
Description
Different dimensions (dependent on your particular equipment) according todrawings DG.45.013 and DG.45.014
Weight DG.45.013 4,5 kg (9,9 lb)
Weight DG.45.014 6,0 kg (13,2 lb)
Working load 5’000 kg (11’000 lb)
Ultimate load 30’000 kg (66’000 lb)
Quick-Connect-System
PURPOSE The Adapter Type 4500 is primarily used as connection between the ConeType 4500 (end piece of longline) and special equipment, like water buk-kets. Secondly it serves as an extension that allows fixation of anotherlongline. It is suitable for helicopters up to a maximum 5’000 kg(11’000 lb) load capacity.
Swiss Rotor Services AG Winterhaldenstrasse 14 ACH-3627 [email protected]
-
Technical Data Test Equipment
Electric power source 27 V / 20 ampere
Field test equipment
For cones type 1200 and 4500
Reliable
Simple to use
Field approved
Swiss Rotor Services AG Winterhaldenstrasse 14 ACH-3627 [email protected]
-
Option: plastic bottle adapter
Steel Suspension for Eastern Cargo Hook
Swiss Rotor Services AG Winterhaldenstrasse 14 ACH-3627 [email protected]
-
DETAILS
Dimensions according toDG.12.100 resp. DG.12.101
Weight DG.12.100 4.3 kg (9.5 lb)
Weight DG.12.101 4.2 kg (9.3 lb)
Working load 1,500 kg (3'300 lb)
Ultimate load 9,000 kg (20'000 lb)
Radial and axial ball bearing
Bearings sealed
Simple and robust design
No special tools required maintenance
Quick-Connect-System
Robust slip ring with two ampere each 250 V
Technical Data Swivel Type 1200PROVED IN HIGH DEMANDING LIFT OPERATIONS SINCE 2008(AS350TYPES / SA315 / BELL407)
PURPOSE / DESCRIPTIONFixed on top of the cargo hook, the Swivel Type 1200 functions as theconnection to the Cone Type 1200 (endpiece of longline) and allows theload to rotate in order to prevent the longline from damage. It is suitablefor helicopters up to a maximum 1'500 kg (3'300 lb) load capacity.
Swiss Rotor Services AG Winterhaldenstrasse 14 ACH-3627 [email protected]
-
Description /DetailsDifferent dimensions (dependent on yourparticular equipment) according to drawings DG.12.013, DG.12.022 and DG.12.025
Weight DG.12.013 1,6 kg (3,5 lb)
Weight DG.12.022 1,8 kg (4.0 lb)
Weight DG.12.025 2,5 kg (5.5 lb)
Working load 1’500 kg (3’300 lb)
Ultimate load 9’000 kg (19’800 lb)
Quick-connect-system
Technical Data Connector / Adapter Type 1200PROVED IN HIGH DEMANDING LIFT OPERATIONS SINCE 2011(AS350B3 / SA315 / B407)
PURPOSEThe Adapter Type 1200 is primarily used as connection between theCone Type 1200 (end piece of longline) and special equipment, likewater buckets. Secondly it serves as an extension that allows fixationof another longline. It is suitable for helicopters up to a maximum1'500 kg (3'300 lb) load capacity.
Swiss Rotor Services AG Winterhaldenstrasse 14 ACH-3627 [email protected]
-
Dimensions according to drawingA3.DK.30.001
Weight 50 kg
Working load 3,000 kg
Two independent hook mechanism
Nubbin system
Electromagnetic lock system
Robust steel design
Several 1,000 hours of logging operations
TBO 1,000 hours
Technical Data Double Hook
Swiss Rotor Services AG Winterhaldenstrasse 14 ACH-3627 [email protected]
-
Option: power saw adapter
Steel Suspension for Eastern Cargo Hook
Swiss Rotor Services AG Winterhaldenstrasse 14 ACH-3627 [email protected]