outline curriculum (5 lectures) each lecture 45 minutes lecture 1: an introduction in...
TRANSCRIPT
![Page 1: Outline Curriculum (5 lectures) Each lecture 45 minutes Lecture 1: An introduction in electrochemical coating Lecture 2: Electrodeposition of coating Lecture](https://reader033.vdocuments.us/reader033/viewer/2022051210/551431f8550346ec488b6000/html5/thumbnails/1.jpg)
Outline Curriculum (5 lectures)Each lecture 45 minutes
• Lecture 1: An introduction in electrochemical coating
• Lecture 2: Electrodeposition of coating
• Lecture 3: Anodizing of valve metal
• Lecture 4: Electroless deposition of coating
• Lecture 5: Revision in electrochemical coating
![Page 2: Outline Curriculum (5 lectures) Each lecture 45 minutes Lecture 1: An introduction in electrochemical coating Lecture 2: Electrodeposition of coating Lecture](https://reader033.vdocuments.us/reader033/viewer/2022051210/551431f8550346ec488b6000/html5/thumbnails/2.jpg)
Lecture 5 of 5
Revision in electrochemical coating
![Page 3: Outline Curriculum (5 lectures) Each lecture 45 minutes Lecture 1: An introduction in electrochemical coating Lecture 2: Electrodeposition of coating Lecture](https://reader033.vdocuments.us/reader033/viewer/2022051210/551431f8550346ec488b6000/html5/thumbnails/3.jpg)
Type of electrochemical processes for the production of surface coatings
• Electroplating– Uses external power sources to reduce metal ions to metal deposit.– Requires the substrate to be electrically conductive.
• Electroless deposition– Uses chemical reaction to reduce metal ions.– Requires substrate to be catalytically active.– Does not requires an external power sources to initiate deposition.
• Immersion deposition– Metal ion is reduced from the solution by exchange with metallic
substrate. – Type of metal that can be deposited depends on the metal
substrate and metal ions in solution. (Electromotive Series Table).– Displacement Reaction.
![Page 4: Outline Curriculum (5 lectures) Each lecture 45 minutes Lecture 1: An introduction in electrochemical coating Lecture 2: Electrodeposition of coating Lecture](https://reader033.vdocuments.us/reader033/viewer/2022051210/551431f8550346ec488b6000/html5/thumbnails/4.jpg)
Type of electrochemical processes for the production of surface coatings
• Anodizing– Anodic oxidation of metal to form metal oxide.– Metal oxide forms at the anode.– Requires the external supply of high voltage, e.g. 10 to 100 V
to form oxide layer.– Oxide layer thickness, e.g. 10 to 100 m.
• Plasma electrolytic oxidation– Anodic oxidation of metal to form metal oxide.– Uses higher voltage than anodizing, e.g. 100 to 1000 V.– Metal oxide forms at the anode.– Thicker oxide layer than anodizing, e.g. 100 to 500 m.
![Page 5: Outline Curriculum (5 lectures) Each lecture 45 minutes Lecture 1: An introduction in electrochemical coating Lecture 2: Electrodeposition of coating Lecture](https://reader033.vdocuments.us/reader033/viewer/2022051210/551431f8550346ec488b6000/html5/thumbnails/5.jpg)
Current efficiency
• The percentage of the current which goes to the useful electroplating reaction.
• Is the ratio between the actual amount of metal deposit, Ma to that calculated theoretically from Faradays Law, Mt.
%100M
MefficiencyCurrent
t
a
![Page 6: Outline Curriculum (5 lectures) Each lecture 45 minutes Lecture 1: An introduction in electrochemical coating Lecture 2: Electrodeposition of coating Lecture](https://reader033.vdocuments.us/reader033/viewer/2022051210/551431f8550346ec488b6000/html5/thumbnails/6.jpg)
Faraday’s laws of electrolysis
amount of material = amount of electrical energy
zF
qn
n = amount of materialq = electrical chargez = number of electronsF = Faraday constant
Faradays Law:
The mass of metal electroplated is directly related to the number of coulombs passed through the electrochemical reactions.
![Page 7: Outline Curriculum (5 lectures) Each lecture 45 minutes Lecture 1: An introduction in electrochemical coating Lecture 2: Electrodeposition of coating Lecture](https://reader033.vdocuments.us/reader033/viewer/2022051210/551431f8550346ec488b6000/html5/thumbnails/7.jpg)
Faraday’s Laws of Electrolysis: Units check
zF
qn
]molC[
]C[]mol[ 1
![Page 8: Outline Curriculum (5 lectures) Each lecture 45 minutes Lecture 1: An introduction in electrochemical coating Lecture 2: Electrodeposition of coating Lecture](https://reader033.vdocuments.us/reader033/viewer/2022051210/551431f8550346ec488b6000/html5/thumbnails/8.jpg)
Faraday’s Laws of Electrolysis: Expanded Relationship
zF
qn
zF
It
M
w
n = amount of material, molw = mass of material, gM = molar mass of material, g mol-1
I = current, At = time, sz = number of electronsF = Faraday constant, 96 485 C mol-1
![Page 9: Outline Curriculum (5 lectures) Each lecture 45 minutes Lecture 1: An introduction in electrochemical coating Lecture 2: Electrodeposition of coating Lecture](https://reader033.vdocuments.us/reader033/viewer/2022051210/551431f8550346ec488b6000/html5/thumbnails/9.jpg)
A Worked Example: Facts
• 200 cm3 of an acidic solution of 0.1M copper
sulphate pentahydrate (CuSO4.5H2O) is
electrolysed using inert electrodes.
• Molar mass of copper, M = 63.54 g mol-1
• Faraday constant, F = 96 485 C mol-1
![Page 10: Outline Curriculum (5 lectures) Each lecture 45 minutes Lecture 1: An introduction in electrochemical coating Lecture 2: Electrodeposition of coating Lecture](https://reader033.vdocuments.us/reader033/viewer/2022051210/551431f8550346ec488b6000/html5/thumbnails/10.jpg)
A Worked Example: Questions on reactions
• A sketch is useful.
• What is the cathode reaction?
• What is the anode reaction?
• What is the cell reaction?
• At which electrode does reduction occur?
![Page 11: Outline Curriculum (5 lectures) Each lecture 45 minutes Lecture 1: An introduction in electrochemical coating Lecture 2: Electrodeposition of coating Lecture](https://reader033.vdocuments.us/reader033/viewer/2022051210/551431f8550346ec488b6000/html5/thumbnails/11.jpg)
Answers on reactions
• Cathode reaction:
Cu2+ + 2e- = Cu
• Anode reaction:
H2O - 2e- = 2H+ + 1/2O2
• Cell reaction:
Cu2+(l) + H2O(l) = Cu(s) + 2H+
(l) + 1/2O2(g)
• Reduction (electron gain) occurs at cathode
![Page 12: Outline Curriculum (5 lectures) Each lecture 45 minutes Lecture 1: An introduction in electrochemical coating Lecture 2: Electrodeposition of coating Lecture](https://reader033.vdocuments.us/reader033/viewer/2022051210/551431f8550346ec488b6000/html5/thumbnails/12.jpg)
A Worked Example: Questions on Concentration
• What is the concentration of dissolved
metal in units of
– mol dm-3
– g dm-3
– ppm
![Page 13: Outline Curriculum (5 lectures) Each lecture 45 minutes Lecture 1: An introduction in electrochemical coating Lecture 2: Electrodeposition of coating Lecture](https://reader033.vdocuments.us/reader033/viewer/2022051210/551431f8550346ec488b6000/html5/thumbnails/13.jpg)
Answers on Concentration• The concentration of dissolved metal is the same
as that of the compound, i.e.:
c = 0.1M = 0.1 mol dm-3
• The concentration on a mass basis is:
c = (0.1 mol dm-3)(63.54 g mol-1)
c = 6.354 g dm-3
• Expressed as parts per million (= mg dm-3):
c = 6.354 x 103 mg dm-3
c = 6354 ppm
![Page 14: Outline Curriculum (5 lectures) Each lecture 45 minutes Lecture 1: An introduction in electrochemical coating Lecture 2: Electrodeposition of coating Lecture](https://reader033.vdocuments.us/reader033/viewer/2022051210/551431f8550346ec488b6000/html5/thumbnails/14.jpg)
A Worked Example: Questions on mass
• What is the mass of dissolved metal in g?
![Page 15: Outline Curriculum (5 lectures) Each lecture 45 minutes Lecture 1: An introduction in electrochemical coating Lecture 2: Electrodeposition of coating Lecture](https://reader033.vdocuments.us/reader033/viewer/2022051210/551431f8550346ec488b6000/html5/thumbnails/15.jpg)
Answers on Mass
• The mass of dissolved copper, w, is given by the product of concentration (on a mass basis) and solution volume:
w = (6.354 g dm-3)(200 cm3)
w = (6.354 g dm-3)(0.200 dm3)
w = 1.271 g
![Page 16: Outline Curriculum (5 lectures) Each lecture 45 minutes Lecture 1: An introduction in electrochemical coating Lecture 2: Electrodeposition of coating Lecture](https://reader033.vdocuments.us/reader033/viewer/2022051210/551431f8550346ec488b6000/html5/thumbnails/16.jpg)
A Worked Example: Questions on Electrical Charge
• Calculate the electrical charge needed to
remove all of the copper from solution.
![Page 17: Outline Curriculum (5 lectures) Each lecture 45 minutes Lecture 1: An introduction in electrochemical coating Lecture 2: Electrodeposition of coating Lecture](https://reader033.vdocuments.us/reader033/viewer/2022051210/551431f8550346ec488b6000/html5/thumbnails/17.jpg)
Answers on
Electrical Charge, q
q = nzF
n = (0.1 mol dm-3)(0.200 dm3)
n = 0.0200 mol
q = (0.0200 mol)(2)(96485 C mol-1)
q = 3859.4 C
![Page 18: Outline Curriculum (5 lectures) Each lecture 45 minutes Lecture 1: An introduction in electrochemical coating Lecture 2: Electrodeposition of coating Lecture](https://reader033.vdocuments.us/reader033/viewer/2022051210/551431f8550346ec488b6000/html5/thumbnails/18.jpg)
A Worked Example: Questions on Rate of Removal
• If the current used is 1.0 A, calculate the
rate of copper deposition in
– g s-1
– kg day-1
![Page 19: Outline Curriculum (5 lectures) Each lecture 45 minutes Lecture 1: An introduction in electrochemical coating Lecture 2: Electrodeposition of coating Lecture](https://reader033.vdocuments.us/reader033/viewer/2022051210/551431f8550346ec488b6000/html5/thumbnails/19.jpg)
Answers on Rate of Removal
zF
It
M
w
zF
MI
t
w
So, the rate of change of mass is given by:
![Page 20: Outline Curriculum (5 lectures) Each lecture 45 minutes Lecture 1: An introduction in electrochemical coating Lecture 2: Electrodeposition of coating Lecture](https://reader033.vdocuments.us/reader033/viewer/2022051210/551431f8550346ec488b6000/html5/thumbnails/20.jpg)
Answers on Rate of Removal
)molC96485)(2(
)A0.1)(molg54.63(
t
w1
1
14 sg10x293.3t
w
![Page 21: Outline Curriculum (5 lectures) Each lecture 45 minutes Lecture 1: An introduction in electrochemical coating Lecture 2: Electrodeposition of coating Lecture](https://reader033.vdocuments.us/reader033/viewer/2022051210/551431f8550346ec488b6000/html5/thumbnails/21.jpg)
Answers on Rate of Cu Removal
134 1010293.3 skgxxt
w
17 24606010293.3 daykgxxxxt
w
102845.0 daykgt
w
How long does it take to deposit 1 m over 100 cm2?)
![Page 22: Outline Curriculum (5 lectures) Each lecture 45 minutes Lecture 1: An introduction in electrochemical coating Lecture 2: Electrodeposition of coating Lecture](https://reader033.vdocuments.us/reader033/viewer/2022051210/551431f8550346ec488b6000/html5/thumbnails/22.jpg)
Answers on Time to Deposit 1 m Copper
102845.0 daykgt
w
How long does it take to deposit 1 m over 100 cm2?)
Methods – either:(a) rearrange earlier equation or(b) use w/t expression
![Page 23: Outline Curriculum (5 lectures) Each lecture 45 minutes Lecture 1: An introduction in electrochemical coating Lecture 2: Electrodeposition of coating Lecture](https://reader033.vdocuments.us/reader033/viewer/2022051210/551431f8550346ec488b6000/html5/thumbnails/23.jpg)
Time to Deposit 1 m Cu on 100 cm2
F.z
I.M
t
w
V
w
I.M
F.z.wt (a) Rearrange earlier equation
But the density of metal is the ratio of mass to volume
and the volume of metal deposited is the product of thickness and area
A.xV So A.x.w and
to give
I.M
F.z.A.x.t
minst
)A)(molg.(
)molC)()(cm)(cmx)(cmg.(t
I.M
F.z.A.x.t
4272
15363
4859621001019681
1243
![Page 24: Outline Curriculum (5 lectures) Each lecture 45 minutes Lecture 1: An introduction in electrochemical coating Lecture 2: Electrodeposition of coating Lecture](https://reader033.vdocuments.us/reader033/viewer/2022051210/551431f8550346ec488b6000/html5/thumbnails/24.jpg)
Time to Deposit 1 m Cu on 100 cm2
1028450 daykg.t
w
21004528 cm/g.A
w
m.cm.cmg.
cmg.x 5317031750
968
28450 2
3
(b) From our earlier result
So, in one day, over a 100 cm2 area
This mass of deposit has a thickness of
1 m is deposited in a much shorter time: ss
.
xxxt 272
5317
6060241
317.5 m are deposited in 1 day so