Job Name:Schedule Reference: Date:

Specifications are subject to change without notice. © 2015 Mitsubishi Electric US, Inc.

Outdoor Unit: 16-TON PURY-HP192YSKMU-A(Consists of Two PURY-HP96YKMU-A and One CMY-R100CBK2 Twinning Kit)

OUTDOOR VRF HEAT PUMP WITH HEAT RECOVERY SYSTEM FEATURES• Innovative flash injection technology for tremendous heating

capacity at lower outdoor temperatures• Air-source, simultaneous cooling and heating• INVERTER-driven compressor• Connects to CITY MULTI indoor units• Controlled via CITY MULTI Controls Network

Specifications Model Name Module 1 Module 2Unit Type PURY-HP192YSKMU-A PURY-HP96YKMU-A PURY-HP96YKMU-A

Nominal Cooling Capacity(460V) Btu/h 192,000 96,000 96,000

Nominal Heating Capacity(460V) Btu/h 215,000 108,000 108,000

Operating Temperature Range *1Cooling (Outdoor) *2

Refer to Module Data23 ~ 115° F (-5 ~ +46° C) DB

Heating (Outdoor) -13 ~ +60°F (-25 ~ +15.5° C) WBExternal Dimensions (H x W x D) In. / mm Refer to Module Data 64-31/32 x 48-1/16 x 29-5/32 /

1,650 x 1,220 x 74064-31/32 x 48-1/16 x 29-5/32 /

1,650 x 1,220 x 740Net Weight Lbs. / kg 1152 / 522 576 / 261 576 / 261External finish Refer to Module Data** Pre-coated galvanized steel sheetElectrical Power Requirements Voltage, Phase, Hertz Refer to Module Data** 460V, 3-phase, 60HzMinimum Circuit Ampacity (MCA) A Refer to Module Data** 32** 32**Maximum Fuse Size A Refer to Module Data** 35** 35**Piping DiameterPiping Diameter (Brazed) (In. / mm)

Liquid (High Pressure) 7/8 / 22.2Refer to System Data

Gas (Low Pressure) 1-1/8 / 28.58

From Modules to Twinning Kit (Brazed) (In. / mm)

Liquid (High Pressure) Refer to Module Data 3/4 / 19.05 3/4 / 19.05Gas (Low Pressure) 7/8 / 22.2 7/8 / 22.2

Indoor UnitTotal Capacity 50 to 150% of ODUs

Refer to System DataModel / Quantity P06 ~ P96 / 1 to 48

Sound Pressure Levels dB(A) 61 58 58FanType x Quantity

Refer to Module DataPropeller Fan x 1 Propeller Fan x 1

Airflow Rate CFM 6200 6200

Compressor Operating RangeCooling: 12% to 100%;

Refer to System DataHeating: 6% to 100%

Compressor Type x Quantity Refer to Module Data Inverter-driven Scroll Hermetic x 1

Inverter-driven Scroll Hermetic x 1

RefrigerantRefer to Module Data

R410A x 26 lbs + 1 oz (11.8 kg)Lubricant MEL32

Protection DevicesHigh-pressure

Refer to Module Data

High pressure sensor, High pressure switch at 4.15 MPa

(601 psi)

High pressure sensor, High pressure switch at 4.15 MPa

(601 psi)Inverter circuit (COMP./FAN) Over-current protection Over-current protectionFan motor Thermal switch Thermal switch

AHRI Ratings (Ducted/Non-Ducted)

EER 11.1 / 12.1

Refer to System DataIEER 16.1 / 16.6COP 3.32 / 3.31

Simultaneous Rating (Ducted/Non-Ducted) SCHE *3 16.9 / 21.4

OPTIONAL PARTS □ Twinning Kit (required)..............................................…CMY-R100CBK2 □ Joint Kit.............................…for details see Pipe Accesories Submittal □ BC Controller.................…..............for details see BC Controller Submittals □ Low Ambient Kit ...............…..for details see Low Ambient Kit Submittal □ Snow/Hail Guards Kit......…for details see Snow/Hail Guards Kit Submittal □ Base Pan Heater Kit.............for details see Base Pan Heater Kit Submittal

NOTES:*1. Harsh weather environments may demand performance enhancing equipment. Ask your Mitsubishi Electric representative for more details about your region.*2. For details on extended cooling operation range down to -10° F DB, see Low Ambient Kit Submittal.

*3. Simultaneous Cooling and Heating Efficiency** Each individual module requires a separate electrical connection. Refer to electrical data for each individual module.

Specifications are subject to change without notice. © 2015 Mitsubishi Electric US, Inc.

Outdoor Unit: PURY-HP192YSKMU-A – DIMENSIONSUnit: mm (in.)

2 - 257

2. EXTERNAL DIMENSIONSDATA U10

OUTDOOR UNITS

H2i

R2

PURY-HP144, 192YSKMU-A(-BS)Unit : mm(in)

Low pressure

Unit model

Component

unit model

ø15.88(5/8)ø19.05(3/4)

cc

ee

dd

ff

High pressure

69PH

27PH

Twinning Kit~O

utdoor unit

69PH

27PH

)5 eto

N()5

etoN(

--

ø19.05(3/4)ø19.05(3/4)

291P

H44

1PH

Low pressure

Twinning pipe connection size

Outdoor unit 1

Component unit nam

e

Package unit nam

e

BC controller~Twinning pipeab

High pressureO

utdoor Twinning K

it(optional parts)C

MY-R

100CB

K2

Outdoor unit 2

PURY-HP144YSKMU-A PURY-HP192YSKM

U-APURY-HP72YKM

U-A

PURY-HP96YKMU-A

PURY-HP72YKMU-A PURY-HP96YKM

U-A

ø28.58(1-1/8)ø22.2(7/8)

ø15.88(5/8)ø22.2(7/8)

Note 1. Connect the pipes as shown in the figure above. Refer to the table above for the pipe size.

2. Twinning pipe (High pressure) should not be tilted more than 15 degrees from

the horizontal plane.

Be sure to see the Installation Manual for details of Twinning pipe installation.

3. The pipe section before the Twinning pipe (section "a" in the figure) m

ust have at least 500mm

(19-11/16) of straight section

(*including the straight pipe that is supplied with the Twinning pipe).

4. Only use the Twinning pipe by M

itsubishi (optional parts).

5. Connect the outdoor unit 1 with the Twinning pipe (Low pressure) (section "d" in the figure).

30 (1-3/16))6

1/1-

84(

0221

)61/

1-84

( 02

21

1650 (64-31/32)

740 (29-5/32)

Front view

Left view

Outdoor unit 2

Outdoor unit 1

To BC controller

To BC controller

ab

e

fc

d

Twinning pipe(High pressure)<optional parts>

Twinning pipe(Low pressure)<optional parts>

Intakeair

Intakeair

Discharge air

Intakeair

Specifications are subject to change without notice. © 2015 Mitsubishi Electric US, Inc.

Modules 1 and 2: PURY-HP96YKMU-A – DIMENSIONSUnit: mm (in.)

2 - 255

2. EXTERNAL DIMENSIONSDATA U10

OUTDOOR UNITS

H2i

R2

PURY-HP72, 96YKMU-A(-BS)Unit : mm(in)

(1)(1)

(3/4)(5/8)

(1-25/32)

(2-9/16)

(1-3/4)

(2-15/32)(7/8)

(1-3/8)

(1-11/32)

(2-1/16)

(3-23/32)(5-29/32)

(3-1/16)(5-17/32)

)1(

)1(

)4/3

((7/8)

Connecting pipe specifications

Note1. P

lease refer to the next page for information

regarding necessary spacing around the

unit and foundation w

ork.

2. At brazing of pipes, w

rap the refrigerant service valve

with w

et cloth and keep the temperature of

refrigerant service valve under 120°C

(248°F).

Refrigerant servicevalve <High pressure>

Refrigerant servicevalve <Low pressure>

Refrigerant service valve<Low pressure>Refrigerant service valve<High pressure>

(5-3/4)

(1-3/16)(1-3/16)

(29-5/32)(Mounting pitch)

(26-23/32~26-15/16)

(26-13/16)

(Mounting pitch)

)23/

5-3(

)23/

5-3(

(10-11/32)

(3-5/16)(3-23/32)

(10-23/32) 272(11-7/8) 301

(8-15/16) 227

(2-1/4)(2-1/4)

(13/16)(13/16)

(3-17/32) (3-1/16)

1

(9-29/32) 251(9-5/16) 236

(10-23/32) 272

(11-15/16)

(25/32)(25/32)

(2-25/32) =(5-29/32)X4(23-5/8)

<Snow hood attachment hole>

4X5-ø4.6 (3/16) Hole(M

ake hole at the plastic fan guard for snow hood attachm

ent)

Intakeair

Discharge air

Control box

Intakeair

Servicepanel

Intakeair<Sling hole>

36 2 4

58

2X2-14(9/16)X20(13/16) Oval hole

2X2-80(3-5/32)X35(1-13/32) Oval hole

7

*1 Use the pipe joint(field supply) and connect to the refrigerant service

valve piping.

Highpressure

ø25.4

Lowpressure

Service valveRefrigerant pipe

Diameter

*1

Highpressure

Lowpressure

Model

PURY-HP72YKMU-A

ø25.4ø19.05 Brazed

ø15.88 Brazed*1

ø45 Knockout hole

Specifications

ø43.7 or ø22.2 Knockout hole

ø62.7 or ø34.5 Knockout hole

Front through hole

Bottom through hole

Bottom through hole

Front through hole

Front through hole

For wires

UsageFront through hole

Front through hole(Uses when twinning kit (optional parts) is m

ounted.)

140 × 77 Knockout hole

150 × 94 Knockout holeBottom

through hole

For pipes

ø52 Knockout hole

For transmission cables

ø34 Knockout hole

ø65 Knockout hole

PURY-HP96YKMU-A

ø19.05 Brazed*1

ø25.4*1

ø25.4ø22.2 Brazed

Transformer box

58 (2-5/16)75 (2-31/32)

(8-9/16) 217(5-23/32) 145

146 (5-3/4)

146

83 (3-9/32)

262

(740)

150 (5-29/32)

57

54 (2-5/32)

19.5

801060 (41-3/4)

586 (23-3/32)

19.5

5794 84

121 (4-25/32) 600=150×4

20

1220 (48-1/16)

150 (5-29/32)

1650 (64-31/32)

196 (7-23/32)

1347 (53-1/16)

89

303

20

740 (29-5/32)

70

1181 (46-1/2)

140 (5-17/32)

80

77

681(678~684) 5.925.92

Bottom view

Left side viewFront view

Top view

NO.

12346 58 7

Specifications are subject to change without notice. © 2015 Mitsubishi Electric US, Inc.

1340 Satellite BoulevardSuwanee, GA 30024Toll Free: 800-433-4822www.mehvac.com

FORM# PURY-HP192YSKMU-A - 201502

Twinning Kit: CMY-R100CBK2

Notes:

Ref: CMY_R100VBK_EXD_EUDB_SI

<Deformed pipe(Accessory)><Low-pressure pipe twinning kit(Accessory)>

High-pressure twinning pipe

Low-pressure pipe twinning kit

<Deformed pipe(Accessory)>

<Pipe for routing through the bottom (Accessory)>

<Pipe for routing through the front (Accessory)>

<Elbow pipe(Accessory)>

1"

3/4" 3/4"(Outside diameter)

1"

(Outside diameter)

(Outside diameter)

(3Pcs.)

(Outside diameter)

(Outside diameter)

(Outside diameter)

1”

1”

1”

7/8" 3/4"

5/8” 3/4”

3/4"

7/8”

1-5/32”

3/4” 7/8"

7/8" 7/8"

1-5/32"

1-5/32"

1-3/32”1”

21/3

2"

8-7/16” 4-17/32"

2-5/

16"

7-17/32"

3-5/32"

2-3/

8”

3-17

/32”

1-1/

4”

4-5/32”

2-15/32"

3-5/32"

1-13/3

2”

5-1/4”21/32”

6-15

/16”

17-1/32”

2-15/32"

1-7/1

6”

1-7/16”

1-31

/32"

1-31/32"

CMY-R100CBK2