outdoor lighting - acuity brands

517

CONTENTSAREA LIGHTINGArchitectural ...............................................................................520-523

Specifi cation ...............................................................................524-532

General Purpose..........................................................................533-535

Contractor Select Stock ...................................................................... 536

BOLLARDSArchitectural ...............................................................................537-538

Specifi cation ...............................................................................539-541

WALL MOUNTEDArchitectural ...............................................................................542-546

Specifi cation ...................................................................................... 547

General Purpose..........................................................................548-555

Contractor Select Stock ...............................................................556-558

PARKING GARAGE & CANOPYSpecifi cation ...............................................................................559-562

FLOODLIGHTINGArchitectural ...............................................................................563-564

Specifi cation ...............................................................................565-569

General Purpose..........................................................................570-573

Sportslighter ...............................................................................574-575

Contractor Select Stock ...............................................................576-578

OPTIONS & ACCESSORIES ............................................579-583

NIGHTTIME FRIENDLY LIGHTING ...............................584-585

DESIGN GUIDELINES ........................................................586-587

POLESGeneral Information....................................................................588-589

Steel............................................................................................590-596

Aluminum...................................................................................598-605

Fiberglass....................................................................................606-607

Concrete......................................................................................608-609

Wood ................................................................................................. 611

Options & Accessories ............................................... 597, 610, 612-615

LITHO

NIA O

UTD

OO

R

PSG101-800-279-8041 | www.lithonia.com518

LITH

ON

IA O

UTD

OO

R

ALX Series LED Area Luminaire

Breaks from the mold of traditional area lighting with high-performance LED illumination. Advanced thermal management and state-of-the-art optical design, combine to offer the fi rst LED-alternative to meet the application demands previously served only by HID.

www.lithonia.com/ALX-LED

TWF Full Cut-off Wall Pack

A contemporary solution for commercial applications requiring a Nighttime Friendly™ wall pack. Precision-engineered refl ector packages and a die-cast housing ensure reliable performance.

www.lithonia.com/TWF

Emergency LED (ELED) Egress Option

An LED source alternative for egress illumination. Paired with either HID or CFL luminaires from the architectural sconce line, the ELED option provides a solution for higher mounting height, cold weather application and source redundancy egress challenges for egress lighting.

www.lithonia.com/ELED

POLES CENTRAL

One central location for everything you need to know when selecting or installing a pole with your lighting fi xture. Lithonia Lighting offers the widest selection of pole products from any single source; available in steel, aluminum, wood, fi berglass and concrete.

www.lithonia.com/Poles

OMEROTM FAMILY

style, versatility, performanceARCHITECTURAL DISTINCTION FROM TOP TO BOTTOM, the contemporary OMERO design combines dayform aesthetics with industry-leading nighttime performance. The fl owing lines and graceful curves are carried throughout the family and provide application versatility from wall mount to site and area applications.

Optional decorative arm and pole bases complement the fi xtures.

For more information, visit www.lithonia.com/Omero

LITH

ON

IA O

UTD

OO

R


AR

EA L

IGH

TIN

GArchitectural

AS ASTAeris™

Series Lamp type1 Distribution1 Voltage Ballast Mounting14

AS1

AS2

AST1

AST2

High pressure sodium2

35S3

50S4

70S

100S

150S

200S

250S

400S

Metal halide

50M2, 5

70M2, 5

100M2

150M

175M6

200M7

250M

320M7

400M

Metal halide ceramic8

50MHC2, 5

70MHC2, 5

100MHC2

150MHC

Compact fluorescent

2/32TRT9

42 TRT

2/42TRT9

57TRT

70TRT

SR2 Type II segmented

SR3 Type III segmented

SR4SC Type IV segmented, FT, sharp cutoff

SR4W Type IV segmented, FT, wide

SR5S Type V segmented, square

120

20810

24010

277

347

48010

TB11

23050HZ12

MVOLT13

(blank) Magnetic ballast

CWI Constant wattage isolated12

SCWA Super CWA ballast

Ships included

SPA Square pole mounting block

RPA Round pole mounting block

WBA Wall bracket (up or down)15

Ships separately16, 17

ASKMA1 AS1 mast arm adaptor

ASKMA2 AS2 mast arm adaptor

DCAS1 AS1 Deco arm for square pole

DCAS1R AS1 Deco arm for round pole

DCAS2 AS2 Deco arm for square pole

DCAS2R AS2 Deco arm for round pole

Options Finish Lamped

Ships installed

SF Single fuse, 120V, 277V, 347V18

DF Double fuse, 208V, 240V, 480V18

GMF Internal slow-blow fusing

ELDW Bodine emergency battery backup18

EC Emergency circuit18, 19

QRS Quartz restrike system18, 19

PER NEMA twist-lock receptacle only20

HS House-side shield21

CSA Meets Canadian standards

NOM Meets Mexican standards (consult factory)

INTL Available for MH probe start shipping outside the U.S.

Ships separately16

PE1 NEMA twist-lock PE (120V-240V)

PE3 NEMA twist-lock PE (347V)



SC Shorting cap for PER option

VG Vandal guard22

(blank) Dark bronze (std.)

DBL Black

DGC Charcoal gray

DMB Medium bronze

DNA Natural aluminum

DWH White

CR Enhanced corrosion resistance

CRT Non-stick protective coating (black)

LPI Lamp included

L/LP Less lamp

Intended Use

For streets, walkways, parking

lots and surrounding areas.

Construction

Housing: Rugged, die-cast,

single-piece aluminum

housing with nominal 1/8"

wall thickness.

Door Assembly: Die-cast

doorframe, impact-resistant,

tempered glass lens, 3/16"

thick, fully sealed with one-

piece tubular silicone gasket.

Finish: Standard finish is dark

bronze polyester powder

finish. Additional architec-

tural colors available; see

www.lithonia.com/archcolors.

Optics

Anodized segmented reflec-

tors for superior uniformity

and control. Reflectors attach

with tool-less fasteners

and are rotatable and

interchangeable. Four full

cutoff distributions available:

Type II (roadway), Type

III (asymmetric), Type IV

(forward throw), and Type V

(symmetric square).

Electrical

Ballasts: Mounted on remov-

able power tray and have

positive locking disconnect

plugs. All ballasts are 100%

factory tested. High reac-

tance, high power factor for

150W and below. Constant

wattage autotransformer

175W and above. MH: 150W

and below are standard with

pulse-start ignitor technol-

ogy. Super CWA Pulse Start

ballasts, 88% efficient and

EISA legislation compliant,

are required for 151-400W

(must order SCWA option)

for U.S. shipments only. CSA,

NOM or INTL required for

probe start shipments outside

the U.S. Compact fluorescent

uses an electronic high-

frequency ballast.

Socket: Porcelain, medium-

base socket for AS1, mogul-

base socket for AS2, with

copper alloy nickel-plated

screw shell and center con-

tact. Ceramic metal halide

lamps are recommended for

use in applications where

superior color rendition,

lumen maintenance and

longer lamp life are desired.

Fluorescent is four-pin posi-

tive latching thermoplastic.

LPI is standard 35K for CFL.

Installation

Heavy-duty easy-mount

block attaches to pole or wall

to provide ease of installation

as well as ensured alignment

and leveling. Additional

backing plate and receiver

used to mount AST suspend

tension rod. AST1 mounts

9.64" lower than specified

pole height. AST2 mounts

13.89" lower than specified

pole height.

Listings

UL Listed (standard). CSA Cer-

tified or NOM Certified (see

Options). UL Listed for 25 °C

ambient and wet locations.

U.S. Patent No. D447, 590.

Canadian Patent No. 94324.

IP65 Rated.

ORDERING INFORMATION For shortest lead times, configure products using bolded options. Example: AS1 150M SR2 TB SPA LPI

ADDITIONAL INFORMATION For additional product information, visit www.lithonia.com.

6-1/4(15.9)

22-1/4(56.5)

13(33.0)

AS1/AST1 EPA: 0.7ft2 (.07 m2)

Max. weight: 25.9 lbs (11.7 kg)

8-1/4(21.0)

28-1/2(72.4)

17(43.2)

AS2/AST2 EPA: 1.2ft2 (1.1 m2) Max. weight: 40 lbs (18.2 kg)

Notes1 Specify lamp type and distribution. See

Configurations table.

2 Not available with SCWA.

3 120V only.

4 120V and 277V only.

5 Not available with 480V.

6 Not available AS1/AST1 SCWA.

7 Must be ordered with SCWA.

8 Not applicable with L/LP.

9 Available in SR3 only.

10 Must specify CWI for use in Canada.

11 Optional multi-tap ballast (120V, 208V, 240V, 277V). In Canada 120V, 277V, 347V; ships as 120V/347V.

12 Consult factory for available wattages.

13 Multi-volt electronic ballast (compact

fluorescent only) capable of operating on any line voltage between 120V and 277V.

14 Mounting block included standard.

15 Mounted in lens up orientation, fixture is damp location rated. AST available in down orientation only.

16 May be ordered as accessory. Not available with AST.

17 Must specify finish.

18 SF, DF, QRS, EC, or ELDW options cannot be ordered together.

19 Maximum allowable wattage lamp included.

20 Photocell not included.

21 SR2, SR3, SR4W only.

22 Prefix with fixture name and size (e.g., AS1VG).

CONFIGURATIONSSERIES LAMP TYPE DISTRIBUTION

AS1, AST135S, 50S, 50M, 50MHC, 70S, 70M, 70MHC,

100S, 100M, 100MHC,150S, 150M, 150MHC, 175M, 42TRT, 57TRT, 70TRT

SR2, SR3,SR4SC, SR5S

AS1, AST1 2/32TRT, 2/42TRT SR3

AS2, AST2175M, 200S, 200M, 250S, 250M, 320M,

350M, 400S, 400MSR2, SR3, SR4SC, SR4W,

SR5S

DRILLING PATTERNS(SEE POLE ORDERING, PAGE 588)

DM19AS 1 at 90°DM28AS 2 at 180°DM29AS 2 at 90°DM39AS 3 at 90°DM49AS 4 at 90°DM32AS 3 at 120° (round poles only)

Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted.

PRODUCT INFORMATION

LITHO

NIA

OU

TDO

OR

521www.lithonia.com | 1-800-279-8041PSG10

Architectural AR

EA LIG

HTIN

G

MR MRT

Omero™

Series Lamp type1 Distribution1 Voltage Ballast Mounting14

MR1

MR2

MRT1

MRT2

High Pressure Sodium2

35S3

50S4

70S

100S

150S

200S

250S

400S

Metal Halide

50M2, 5

70M2, 5

100M2

150M

175M6

200M7

250M

320M7

350M7

400M


50MHC2, 5

70MHC2, 5

100MHC2

150MHC

Compact fluorescent

2/32TRT9

42 TRT

2/42TRT9

57TRT

70TRT

Induction

100IL

150IL






120

20810

24010

277

347

48010

TB11

23050HZ12

MVOLT13




Ships included



WBA Wall bracket (up or down)15


DCMR1 MR1 Deco arm for square pole

DCMR1R MR1 Deco arm for round pole

DCMR2 MR2 Deco arm for square pole

DCMR2R MR2 Deco arm for round pole


Ships installed

SF Single fuse, 120V, 277V, 347V

DF Double fuse, 208V, 240V, 480V


QRS Quartz restrike system18

EC Emergency circuit18


TP Tamperproof





Ships separately16






VG Vandal guard21


DBL Black

DGC Charcoal gray

DMB Medium bronze


DWH White



LPI Lamp included

L/LP Less lamp

Intended UseStreets, walkways, parking lots and surrounding areas.

ConstructionHousing: Rugged, die-cast, single-piece aluminum housing with nominal wall thickness of 1/8". Door assembly: Die-cast door-frame has impact-resistant, tempered glass lens (3/16" thick), fully gasketed with one-piece tubular silicone. Finish: Dark bronze polyester powder f inish standard. Additional architectural colors available, see www.lithonia.com/archcolors.

Optics MIRO finish, segmented reflectors for superior unifor-

mity and control. Reflectors attach with tool-less fastener and are rotatable and inter-changeable. Four full cutoff distributions available.

Electrical Ballasts: Mounted on remov-able power tray and have positive locking disconnect plugs. All ballasts are 100% factory tested. High reac-tance, high power factor for 150W and below. Constant wattage autotransformer 175W and above. MH: 150W and below are standard with pulse-start ignitor technol-ogy. Super CWA Pulse Start ballasts, 88% efficient and EISA legislation compliant, are required for 151-400W (must order SCWA option) for

U.S. shipments only. CSA, NOM or INTL required for probe start shipments outside the U.S. Compact fluorescent uses an electronic high-frequency ballast. High-frequency generator for Induction.

Socket: Porcelain, medium-base socket for MR1, mogul-base socket for MR2, with copper alloy nickel-plated screw shell and center contact. Ceramic metal halide lamps are recommended for use in applications where superior color rendition, lumen maintenance and longer lamp life are desired. Fluorescent is four-pin posi-tive latching thermoplastic. LPI is standard 35K for CFL.

Installation Heavy-duty easy-mount block attaches to pole or wall to provide ease of installation as well as ensured alignment and leveling. Additional backing plate and receiver used to mount MRT suspend tension rod. MRT1 mounts 9.64" lower than specified pole height. MRT2 mounts 13.89" lower than specified pole height.

ListingsListed and labeled to UL stan-dards for wet locations. Listed and labeled to CSA standards (see Options). NOM Certified (see Options). IP65 Rated. U.S. Patent No. D556,357.

ORDERING INFORMATION For shortest lead times, configure products using bolded options. Example: MR1 150M SR3 TB SPA LPI



MR1, MRT135S, 50S, 50M, 50MHC, 70S, 70M, 70MHC, 100S,

100M, 100MHC, 150S, 150M, 150MHC, 175M, 42TRT, 57TRT, 70TRT

SR2, SR3, SR4SC, SR5S

MR1, MRT1 2/32TRT, 2/42TRT SR3MR1, MRT1 100IL Not applicableMR2, MRT2 175M, 200S, 200M, 250S, 250M, 320M, 350M, 400S, 400M SR2, SR3, SR4SC, SR4W, SR5SMR2, MRT2 150IL Not applicable

DRILLING PATTERNS(SEE POLE ORDERING, PAGE 588)

DM19AS 1 at 90°DM28AS 2 at 180°DM29AS 2 at 90°DM39AS 3 at 90°DM49AS 4 at 90°DM32AS 3 at 120° (round poles only)

25(63.5)

8-1/4(21.0)

18-5/8(47.3)

24-1/2(62.2)

33(83.8)

6-3/8(16.2)

MR1/MRT1 MR2/MRT2 EPA: 0.54ft2 (0.05 m2) 0.91ft2 (0.08 m2) Max. weight: 27 lbs (12.2 kg) 46 lbs (20.9 kg)

Induction weight: 35 lbs (15.9 kg)

Notes1 Specify lamp type and distribu-

tion. See Configurations table.


3 120V only.

4 120V and 277V only.


6 Not available MR1/MRT1 SCWA.







13 Multi-volt electronic ballast

(Compact fluorescent and Induction only) capable of operating on any line voltage between 120V and 277V.

14 Mounting block included standard.

15 Mounted in lens up orientation, fixture is damp location rated. MRT available in down orienta-tion only.

16 May be ordered as accessory. Not available with MRT.




20 SR2, SR3, SR4W only.

21 Prefix with fixture name and size (e.g., MR1VG).


PRODUCT INFORMATION

LITH

ON

IA O

UTD

OO

R


ArchitecturalA

REA

LIG

HTI

NG

Series Lamp type1 Distribution1 Voltage Balast Mounting

MRP High pressure sodium2

50S

70S

100S

150S

Metal halide

70M2,3

100M2

150M

175M4


70MHC2,3

100MHC2

150MHC

Compact fl uorescent

2/32TRT6

42 TRT

2/42TRT6

57TRT

70TRT

Induction

100IL





120

2087

2407

277

347

4807

TB8

23050HZ9

MVOLT10



SCWA Super CWA ballast11

Ships installed

(blank) 4" round open-top pole


MRPF3 4" to 3" O.D. round open-top pole fi tter

MRPF5 4" to 5" O.D. round open-top pole fi tter

MRPT20 MRP 2-3/8" tenon slipfi tter

MRPT25 MRP 2-7/8" tenon slipfi tter


Ships installed






PER NEMA twist lock receptacle only15

TP Tamperproof




INTL International shipment for 175M

Ships separately12






VG Vandal guard17


DBL Black

DGC Charcoal gray

DMB Medium bronze


DWH White



LPI Lamp included

L/LP Less lamp

MRPOmero™

Intended Use

Streets, walkways, parking

lots and surrounding areas.

Construction

Rugged, die-cast, single-piece

aluminum housing with nomi-

nal wall thickness of 1/8".

Die-cast, top-access door-

frame has impact-resistant,

tempered glass lens (3/16"

thick). Doorframe is fully

gasketed with one-piece

tubular silicone.

Finish: Standard fi nish is dark

bronze corrosion-resistant

polyester powder finish.

Additional architectural

colors are available; see


Optics

MIRO fi nish, segmented

refl ectors for superior

uniformity and control. Re-

fl ectors attach with tool-less

fastener and are rotatable

and interchangeable. Four

full cutoff distributions

available: Type II (roadway),

Type III (asymmetric), Type

IV (forward throw) and Type

V (symmetric square). Not ap-

plicable with Induction.

Electrical

Ballasts: Mounted on remov-

able power tray and have

positive locking disconnect

plugs. All ballasts are 100%





175W. MH: CSA, NOM or

INTL required for probe start

shipments outside of the

US for 175M. Not available

175M SCWA. Compact

fl uorescent uses an electronic

high-frequency ballast. High-

frequency generator for

Induction.


base socket with copper

alloy nickel-plated screw

shell and center contact.

Ceramic metal halide lamps

are recommended for use in

applications where superior

color rendition, lumen main-

tenance and longer lamp

life are desired. Fluorescent

is four-pin positive latching

thermoplastic. LPI is standard

35K for CFL.

Installation

Mounts to a 4" round

open-top pole. Optional

mounting available.

Listings

Listed and labeled to UL

standards for wet locations.

Listed and labeled to CSA

standards (see Options).

NOM Certifi ed (see Options).

Optical chamber is IP65 rated.

U.S. Patent No. D553,779.

ORDERING INFORMATION For shortest lead times, confi gure products using bolded options. Example: MRP 150M SR3 TB LPI



MRP50S, 70S, 70M, 70MHC, 100S, 100M,

100MHC, 150S, 150M, 150MHC, 175M, 42TRT, 57TRT, 70TRT

SR2, SR3, SR4SC, SR5S

MRP 2/32TRT, 2/42TRT SR3MRP 100IL Not applicable

Notes1 Specify lamp type and distribution. See Confi gurations table.



4 Not available with SCWA. Requires CSA, NOM, or INTL.






10 Multi-volt electronic ballast (Compact fl uorescent and Induction only) capable of operating on any line voltage between 120V and 277V.

11 Only available with 150M or 150MHC.

12 May be ordered as accessory.

13 Must specify fi nish.



16 SR2, SR3 only.

17 Order as MR1VG as an accessory.

6-3/8(16.2)

32(81.3)

18(45.7)

Weight: 33 lbs (15.0 kg)EPA: 1.125 ft 2

Drawings are for dimensional detail only and may not represent actual mechanical confi guration. Dimensions are shown in inches (centimeters) unless otherwise noted.

PRODUCT INFORMATION


LITHO

NIA

OU

TDO

OR


AR

EA LIG

HTIN

G

Series Lumen output Distribution Voltage Mounting2 Options Finish

ALX1

ALX2

7000L

14000L

21000L

28000L

SR3 Type III asymmetric

SR4 Type IV forward throw

SR5 Type V symmetric

480

MVOLT1



WBA Wall bracket (down only)3

Installed

PER NEMA twist-lock receptacle only

HS House-side shield

DS Dual-switching

Shipped separately4


DSSPE127 NEMA solid state twist-lock PE (120V/240V/277V)


DBL Black


DWH White

ALXIntended Use

Streets, walkways, parking

lots, and surrounding areas.

Construction

Rugged, die-cast, single-

piece aluminum housing.

Unique fl ow-through

design for optimized thermal

management. Modular

design allows for ease of

maintenance and potential

for future system upgrades.

Integral arm provides easy

installation to a pole or wall

(ALX1 only). Metallic screen

covers the top of the housing

preventing debris buildup

while allowing for airfl ow.

Housing completely sealed

against moisture or environ-

mental contaminants. Low

profi le design minimizes

wind loading.

Door assembly: Die-cast

doorframe enclosing driver

chambers. Doorframe is fully


tubular silicone.

Finish: Standard fi nish is dark

bronze (DDB) corrosion-

resistant polyester powder

coat. Additional architectural

colors available, see


Optics

Individual, precision molded

lens assemblies provide

optimal luminaire spacing and

improved uniformity. Three

full cutoff systems available:


IV (forward throw), Type V

(symmetric). House side shield

available to limit light trespass.

Electrical

Utilizes high-effi ciency LEDs

mounted to a metal core

circuit board and aluminum

heat sink, ensuring optimal

thermal management. 5100°

Kelvin temperature, CRI>70.

Standard drivers are 120v

through 277v, 50 hz to 60 hz

operation. Contact factory

for other voltages. Electronic

drivers are accessible through

hinged door. LED drivers

have power factor >90%

and THD <20%. 28000L

and 14000L lumen package

luminaires can be wired for

two circuit operation.

Installation

Heavy duty mounting block

attaches to pole or wall to

provide ease of installation

as well as ensured alignment

and leveling. ALX pole mount

luminaires utilize the Aeris

Series pole drilling pattern.

Listings

UL Listed for 25°C ambient

and wet locations. IP65 rated

(pending). Down orientation

only. Patents pending.

ORDERING INFORMATION Lead times will vary depending on options selected. Consult with your sales representative. Example: ALX1 7000L SR5 MVOLT SPA

ADDITIONAL INFORMATION For additional product information, visit www.lithonia.com

Notes1 Multi-volt electronic ballast capable of operating on any line voltage

from 120V-277V.

2 Refer to technical data section in Outdoor binder for drilling template.

3 Available with the ALX1 only.

4 May be ordered as an accessory.

Specifi cation subject to change. Consult www.lithonia.com/ALX-LED for latest information.

Architectural

ALX2

ALX1

23-1/2(59.7)

18-3/8(46.7)

5-7/8(14.7)

ALX1

35-3/8(89.7)

18-3/8(46.7)

5-7/8(14.7)

ALX2

PRODUCT INFORMATION

LITH

ON

IA O

UTD

OO

R


SpecificationA

REA

LIG

HTI

NG

KSFSpec-Form®

Series Lamp type1 Distribution Voltage Ballast Mounting

KSF1

KSF2

KSF3


70S

100S

150S

250S

400S

1000S

Metal halide

100M2

150M

175M3

200M4

250M

320M4, 5

350M4, 5

400M5

1000M6


100MHC2

150MHC

R2 Type II roadway8

R3 Type III asymmetric

R4 Type IV, FT9, 10

R4SC Type IV, FT, sharp cutoff8

R4W Type IV, FT, wide8, 9

R5S Type V symmetric square9

120

20811

24011

277

347

48011

TB12

23050HZ13




Arm mounting

SP04 4" arm for square pole14

RP04 4" arm for round pole14

WB04 4" arm for wall

WW04 4" arm for wood pole or wall





SP12 12" arm for square pole

RP12 12" arm for round pole



Optional mounting, ships separately15, 16

KMA External mast arm adaptor

DA12P 12" degree arm for pole

DA12WB 12" degree arm for wall

KTMB Twin mounting bar


Ships installed






KW1 Kilowatch 120V control19





Ships separately15







VG Vandal guard20


DBL Black

DGC Charcoal gray

DMB Medium bronze


DWH White



LPI Lamp included

L/LP Less lamp

Intended Use

For car lots, street lighting or

parking areas.

Construction

Housing: Rugged,

heavy-gauge, aluminum

rectilinear housing. All seams

continuously welded for

weathertight integrity.

Doorframe: Natural anod-

ized, extruded aluminum

frame with mitered corners,

retained with two hinge

pins and secured with one

quarter-turn, quick-release

fastener. Integrally designed,

extruded silicone gasket

provides weatherproof seal

between housing and frame.

Finish: Dark bronze polyester

powder f inish standard.


colors available; see


Optics

Optics: Anodized segmented

reflectors provide superior

uniformity and control. KSF1/

KSF2 reflectors are rotatable

and interchangeable. KSF3

Type IV is rotatable. Five cut-

off distributions available: R2

(roadway), R3 (asymmetric),

R4SC (forward throw, sharp

cutoff), R4W (wide, forward

throw), R5S (square).

Lens: .125" thick, impact-

resistant tempered glass

with thermally applied, silk-

screened power door shield.

Electrical

Electrical components

mounted to heavy-gauge

plate to maximize heat

dissipation and structural

integrity. Ballast: All bal-

lasts are 100% factory

tested. High reactance, high

power factor for 150W and

below. Constant wattage

autotransformer 175W and

above. MH: 150W and below

are standard with pulse-start

ignitor technology. Super

CWA Pulse Start ballasts,

88% efficient and EISA

legislation compliant, are

required for 151-400W (must

order SCWA option) for U.S.

shipments only. CSA, NOM or


shipments outside the U.S.

Socket: Horizontally oriented,

mogul-base porcelain socket

for 175W and above, medium

base for 150W and below,

with copper alloy, nickel-

plated screw shell and center

contact. UL Listed 1500W-

600V, 4KV pulse rated.

Installation

Mounting: Extruded alu-

minum arm for square pole

mounting shipped in fixture

carton as standard. Optional

mountings available.

Listings



Options). UL Listed for 25°C


IP65 rated.

ORDERING INFORMATION For shortest lead times, configure products using bolded options. Example: KSF1 250S R3 TB SP09 LPI





3 Universal, mogul base lamp allows KSF to be available with SCWA.


5 Must use ED28 lamp.

6 Must use BT37 lamp with R5S.


8 Not available KSF3.




12 Optional multi-tap ballast (120V, 208V,

240V, 277V). In Canada 120V, 277V, 347V; ships as 120V/347V.


14 KSF1, KSF2 must use 9" arm, KSF3 must use 12" arm when mounting two luminaires at 90°.





19 Available with 150S, 250S and 400S only.

20 Prefix with fixture name and size. VG: KSF1VG, KSF2VG. HS: KSF1HS, KSF2HS (for use with R2 or R3); KSF3HS (for use with R3 or R4).


KSF170S, 100S, 100M, 100MHC, 150S,

150M, 150MHC, 175M, 200M, 250MR2, R3, R4SC

KSF2 250S, 320M, 350M, 400S, 400M R2, R3, R4SC, R4W, R5SKSF3 1000S, 1000M R3, R4, R5S

H

L W

KSF1 KSF2 KSF3 EPA: 1.5 ft2 (0.14 m2) 2.0 ft2 (0.19 m2) 3.0 ft2 (0.28m2) Length: 21-1/4 (54.0) 24-5/8 (62.5) 29-5/8 (75.2) Width: 15-1/2 (39.3) 17-3/4 (45.1) 23-5/8 (59.9) Height: 7-1/4 (18.4) 8-3/8 (21.1) 10-1/2 (26.7) Max. weight: 35 lbs (15.9 kg) 52 lbs (23.6 kg) 80 lbs (36.3 kg)


PRODUCT INFORMATION

LITHO

NIA

OU

TDO

OR


AR

EA LIG

HTIN

GSpecifi cation

KSF POLE COMBOSpec-Form®

Intended Use

For parking areas, street

lighting, walkways and

car lots.

Construction

Housing: Rugged, .063" thick,

aluminum rectilinear hous-

ing. Formed for weather-

tight seal and integrity.

Doorframe: Naturally anod-

ized, extruded, aluminum

door frame with mitered

corners is retained with two

hinge pins and secured with

a quarter-turn fastener.

Impact-resistant, tempered

glass lens is fully gasketed

with one-piece tubular silicone.


powder fi nish.

Optics

Anodized aluminum

segmented refl ectors. IES

cutoff distributions: R3

(asymmetric), R4SC (forward

throw, sharp cutoff ), or

R4W (forward throw, wide).

Optional houseside shield

(HS) available.

Electrical

Ballast: All ballasts are 100%

factory tested. Super CWA

Pulse Start ballasts, 88%

effi cient and EISA legislation

compliant, are required; must

order SCWA option.

Socket: Porcelain, horizon-

tally oriented mogul base

socket with copper alloy,

nickel-plated screw shell

and center contact. UL Listed

1500W, 600V. Lamp included.

Installation

Extruded aluminum arm for

square pole mounting.

Listings

UL Listed (standard). UL

Listed for 25°C ambient and

wet locations. IP65 Rated.

Series/Lamp type/Pole height Distribution Pole diameter Arm length Ballast Options

Series Lamp type Pole height

KS1 1 fi xture 250M 16C 16-foot "C" pole

KS2 2 fi xtures 320M 20C 20-foot "C" pole

400M 25C 25-foot "C" pole

30C 30-foot "C" pole1


R4SC Type IV, FT, sharp cutoff

R4W Type IV, FT, wide

4C

5C1

(blank) 4 inches

09 9 inches

SCWA Super CWA ballast2 HS House-side shield3

ORDERING INFORMATION For shortest lead times, confi gure products using bolded options. Example: KS2400M25C R3 4C SCWA


KS2400M25C R3 4C SCWA CONSISTS OF QUANTITY CI CODE DESCRIPTION

1 SSS 25 4C DM28 PL DDB SHAFT2 KSF2 400M R3 TB SCWA SP04 LPI1 SBC4 DDB U1 ABSSS-4C1 STC-4 U

MAXIMUM M.P.H. WIND LOAD WITH 1.4 GUSTSPOLE KS1 SINGLE KS2 DOUBLE

16' 4C 4" or 9" arm 100 10020' 4C 4" or 9" arm 100 10025' 4C 4" or 9" arm 90 8030' 5C 4" or 9" arm 90 80

Notes1 Only available 30'/5C.

2 Must be specifi ed.

3 Ships separately. Not available with R4SC.


KSF POLE COMBO EPA: 2.0 ft2 (0.19 m2) Length: 24-5/8 (62.5) Width: 17-3/4 (45.1) Height: 8-3/8 (21.3) Max. weight: 52 lbs (23.6 kg)

H

L W

PRODUCT INFORMATION

LITH

ON

IA O

UTD

OO

R


AR

EA L

IGH

TIN

GSpecification

KSESymmetra™

Series Lamp type1 Distribution1 Voltage Ballast Mounting

KSE1

KSE2


70S

100S

150S

250S

400S

Metal halide

100M2

150M

175M3

200M4

250M

320M4

350M4, 5

400M5


100MHC2

150MHC

R2 Type II roadway


R4SC Type IV, FT, sharp cutoff

R4W Type IV, FT, wide7


120

2088

2408

277

347

4808

TB9

23050HZ10




Ships included













Ships installed











Ships separately12







VG Vandal guard16


DBL Black

DGC Charcoal gray

DMB Medium bronze


DWH White



LPI Lamp included

L/LP Less lamp

Intended Use


parking areas.

Construction

Housing: Rugged, heavy-

gauge, extruded aluminum

housing. Square shape,

seam-welded and internally

sealed for weathertight in-

tegrity.

Doorframe: Natural anod-


doorframe sealed to housing

by silicone closed-cell

gasket and secured with one

quarter-turn closing screw.

Can be hinged from any of

the four sides.


bronze polyester powder.

Additional architectural colors

and striping available, see


Optics

Anodized, segmented

reflectors for uniformity

and control. Reflectors are

tool-less, rotatable and

interchangeable. Five cutoff

distributions available: R2


R4SC (forward throw, sharp

cutoff), R4W (wide, forward

throw) and R5S (symmetric).

Lens: 0.125"-thick, impact-

resistant tempered glass.

Electrical






























Installation

Mounting: Extruded 4" alu-

minum arm for square pole

mounting, shipped in fixture

carton as standard. Optional


Listings

UL Listed (standard). CSA

Certified or NOM Certified

(see Options). UL Listed for

wet locations.

ORDERING INFORMATION For shortest lead times, configure products using bolded options. Example: KSE1 150M R3 277 SP09 LPI



KSE170S, 100S, 100M, 100MHC, 150S, 150M,

150MHC, 175M, 200MR2, R3, R4SC

KSE2 250S, 250M, 320M, 350M, 400S, 400M R2, R3, R4SC, R4W, R5S Notes1 Specify lamp type and distribution.

See Configurations table.


3 Universal, mogul base lamp allows KSE to be available with SCWA.


5 Must use ED28 lamp.


7 Not available KSE1.




11 Use 9" arm when mounting two luminaires at 90°.





16 Available with 150S, 250S and 400S only.

17 Prefix with fixture name and size. VG: KSE1VG, KSE2VG. HS: KSE1HS, KSE2HS (for use with R2 or R3).

SquareArm

H

KSE1 KSE2 EPA: 1.3 ft2 (.12m2) 1.9 ft2 (.18m2) Square: 15-3/4 (40.0) 19 (48.3) Height: 8-3/4 (22.2) 11 (27.9)Max. weight: 26.6 lbs (12.1 kg) 39.9 lbs (18.1 kg)


PRODUCT INFORMATION

LITHO

NIA

OU

TDO

OR


AR

EA LIG

HTIN

GSpecification


KVE2

KVE3


250S

400S

750S

1000S

Metal halide

175M3

200M4

250M

320M4

350M4

400M

750M4

1000M

Horizontal lamp5

R2 Type II roadway6

R3 Type III asymmetric6

R4SC Type IV, FT, sharp cutoff6

R4W Type IV, FT, wide7


Vertical lamp

SYM Symmetric

SYMC Symmetric, cutoff

ASY Asymmetric

ASYC Asymmetric, cutoff5

120

2088

2408

277

347

4808

TB9

23050HZ10




Arm mounting11

SPV04 4" square pole arm

RPV04 4" round pole arm









WBV09 9" wall bracket

WWV09 9" wood pole or wall arm

Post-top mounting

PT4 Post top 4" OD open top pole

PT45 Post top, 4-½" OD open-top pole

PT5 Post top, 5" OD open-top pole



Ships installed








GFL Glass flat lens14

LS Lamp support (size 3 horizontal optics only)





Ships separately15







DBL Black

DGC Charcoal gray

DMB Medium bronze


DWH White



LPI Lamp included

L/LP Less lamp

KVEIntended Use

For streets, parking lots and

surrounding areas.

Construction

Housing: Square, rugged,

heavy-gauge, extruded alumi-

num housing. Fully gasketed

for weather-tight integrity.


powder finish standard. Ad-

ditional architectural colors

and striping available, see


Optics

Segmented, anodized alumi-

num optics are interchange-

able and rotatable. Vertically

lamped sealed optics include

symmetric, symmetric cutoff,

asymmetric and asymmetric

cutoff. Design redirects light

around arc-tube for optimum

lamp life and maximum

efficiency. Five horizontal

lamp cutoff distributions

available: R2 (roadway), R3

(asymmetric), R4SC (forward

throw, sharp cutoff) R4W

(wide, forward throw) and

R5S (symmetric).

Lens: Impact-resistant,

clear, 3/16 " thick, tempered

drop lens.

Electrical





integrity. Ballast: All ballasts

are 100% factory tested.

Constant wattage autotrans-

former 175W and above.

Super CWA Pulse Start bal-

lasts, 88% efficient and EISA







Socket: Mogul-base porcelain




1500W-600V, 4KV pulse rated

(5KV for 1000S).

Installation

Mounting: Extruded

aluminum arm with integral

splice compartment for wall

or pole mounting is shipped

in fixture carton. Optional


Listings




wet locations. U.S. Patent No.

D417,026.

ORDERING INFORMATION For shortest lead times, configure products using bolded options. Example: KVE2 400S SYM TB SPV12 LPI



KVE2175M, 200M, 250S, 250M, 320M, 350M,

400S, 400M

SYM, SYMC, ASY, ASYC, R2, R3, R4SC, R5S

KVE3400S, 400M, 750S,

1000SSYM, ASY, ASYC, R5S

KVE3 750M, 1000MSYM, SYMC, ASY, ASYC, R2,

R3, R4SC, R5S, R4W

Notes1 Specify lamp type and distribution.

See configurations table.


3 Universal, moguel base lamp allows KVE to be available with SCWA.


5 KVE2 320W, 350W, 400W MH requires ED28 lamp; KVE3 1000W MH requires BT37 lamp. Not available with KVE3 1000S.

6 Not available KVE3 high pressure sodium.

7 Only available KVE3 metal halide; 1000M requires BT37 lamp.


9 Optional multi-tap ballast (120V,

208V, 240V, 277V). In Canada 120V, 277V, 347V; ships as 120V/347V.

10 Consult factory for available watt-ages.

11 KVE2 must use 12" arm, KVE3 must use 14" arm when mounting two luminaires at 90°.


13 Available only with 200M, 400M SCWA: ASY or SYM; 250S or 400S: all distributions.

14 400W maximum.



L/W

KVE2 (arm) KVE3 (arm) KVE2 (post) KVE3 (post) EPA: 3.3 ft2 (0.31 m2) 4.2 ft2 (0.39 m2) 3.4 ft2 (0.32 m2) 4.5 ft2 (0.42 m2) Length/width: 25 (63.5) 29 (73.7) 25 (63.5) 29 (73.7)

Overall Height: N/A N/A 23-7/8 (60.6) 29-1/4 (74.3) Height: 16-3/4 (42.5) 18-1/2 (47.0) 16-3/4 (42.5) 18-1/2 (47.0) Max. weight: 77 lbs (34.9 kg) 87 lbs (39.5 kg) 87 lbs (39.5 kg) 97 lbs (44.0 kg)

HOH

PRODUCT INFORMATION

LITH

ON

IA O

UTD

OO

R


SpecificationA

REA

LIG

HTI

NG

KVF

Series Lamp type1 Distribution1,9 Voltage Ballast Mounting15

KVF1

KVF2


70S

100S

150S

250S

400S

1000S4

Metal halide

50M2,3

70M2,3

100M2

150M

175M5

200M5, 6

250M

320M6

350M6

400M

450M6

1000M7


50MHC2, 3

70MHC2, 3

100MHC2

150MHC

Compact fluorescent2

2/26DTT

2/26TRT

2/32TRT

42 TRT

57TRT

70TRT

Induction2

55IL

85IL

Horizontal lamp

R2 Type II roadway







Vertical lamp

SYM Symmetric

ASY Asymmetric

VFA Vertical FT, automotive

120

20810

24010

277

347

48010

TB11

23050HZ12

MVOLT13

TVOLT14




Arm mounting






Post-top mounting



Ships installed





QRSTD QRS time delay16

DC12 Emergency circuit 12V; 35W lamp included

2DC12 Emergency circuit 12V; two 35W lamps included

DC2012 Emergency circuit 12V; 20W lamp included

2DC2012 Emergency circuit 12V; two 20W lamps included

PE Photoelectric cell - button type17


EA Embossed accents

KW1 KiloWatch 120V control19


TLS Tool-less access

EHS External house-side shield

EHSB External house-side shield black




Ships separately20






VG Vandal guard21


DBL Black

DGC Charcoal gray

DMB Medium bronze


DWH White



LPI Lamp included

L/LP Less lamp

Intended Use


parking areas.

Construction

Heavy-gauge, die-formed

aluminum housing,

fabricated using robotic con-

tinuous seam-weld process

for weathertight integrity.

Integral structural support

plate for mounting arm

and electrical components.

Hinged aluminium door-

frame with stainless steel

hardware. Thermal, shock-

resistant, tempered flat or

drop glass lens. Continuous

silicone gasketing surrounds

lens for weather tight seal.


powder finish standard.

Optional linear embossed

accent reveals are available.




Optics

Vertical-lamp reflectors

are one-piece spun and

formed anodized aluminum.

Horizontal-lamp reflectors

also available. Horizontal

position-oriented for types

R2, R3 and R4. Reflectors are

rotatable and interchangable.

Electrical







High reactance, high power

factor for 150W and below.


former for 175W and above.

MH: 150W and below are

standard with pulse-start


CWA Pulse Start ballasts, 88%

efficient and EISA legislation

compliant, are required for

151-450W (must order SCWA

option) for U.S. shipments only.

CSA, NOM or INTL required for

probe start shipments outside

the U.S. Compact fluorescent


frequency ballast.


socket for KVF2 (1000S is 5K

pulse rated), medium base

for KVF1 with copper alloy,



1500W-600V, 4KV pulse

rated. LPI is standard 35K

for CFL.

Installation

Extruded aluminum arm with

integral splice compartment.

Standard arm is 9" in length.

(12" arm is required for

fixtures mounted at 90°.)

Listings


Certified (see Options). UL

Listed for 25°C ambient

and wet locations. Optical

chamber is IP65 rated for

ingress protection per IEC529

international standards.

ORDERING INFORMATION For shortest lead times, configure products using bolded options. Example: KVF2 1000M SYMDL 480 SP09 LPI





3 Not available 480V.

4 Available with SYMDL, ASYDL and VFADL standard E-25 lamp.

5 Not available KVF1 SCWA with horizontal distributions.

6 Must be ordered with SCWA. 450M only available in vertical distribution.

7 Must use reduced jacket lamp.


9 Designate DL (drop lens) or FL (flat lens) after distribution (ie SR2FL). SR4W only available with FL.


11 Optional multi-tap ballast (120V, 208V, 240V,

277V). In Canada 120V, 277V, 347V; ships as 120V/347V.


13 Multi-volt electronic ballast (compact fluorescent only) capable of operating on any line voltage between 120V and 277V.

14 Tri-volt electronic ballast capable of operat-ing any line voltage between 200V and 277V.



17 Not available 347, 480, or TB. Not available KVF2.

18 Not available KVF1. Photocell not included.

19 Available with 200M-400M SCWA: ASY, SYM or VFA; 250S or 400S: all distributions.


21 Prefix with fixture name and size (e.g., KVF1VG).

CONFIGURATIONSSERIES LAMP TYPE DISTRIBUTIONKVF1 55IL, 85IL Not RequiredKVF1 2/26DTT, 2/26TRT, 2/32TRT SYMDL, SYMFL, ASYDL, ASYFL, SR3DL, SR3FLKVF1 57TRT, 70TRT SR2DL, SR3DL, SR4SCDL, SR5SDL

KVF1

42TRT, 50M, 50MHC, 70S, 70M, 70MHC, 100S, 100M,

100MHC, 150S, 150M, 150MHC, 175M

SYMDL, SYMFL, ASYDL, ASYFL, SR2DL, SR2FL, SR3DL, SR3FL, SR4SCDL, SR4SCFL,

SR5SDL, SR5SFL

KVF1 175M SCWA, 200M SYMDL, SYMFL, ASYDL, ASYFL

KVF2250S, 250M, 320M, 350M,

400S, 400M

SYMDL, SYMFL, ASYDL, ASYFL, VFADL, VFAFL, R2DL, R2FL, R3FL, R3DL, SR2FL,

SR3FL, SR4SCFL, SR4WFLKVF2 450M SYMDL, SYMFL, ASYDL, ASYFL, VFADL, VFAFL

KVF2 1000MSYMDL, SYMFL, ASYDL, ASYFL, VFADL,

VFAFL, R2DL, R2FL, R3FL, R3DLKVF2 1000S ASYDL, SYMDL, VFADL

DH

S

OH

S

A

KVF1 KVF2

EPA ARM: 1.2 ft2 (0.11m2) 2.8 ft2 (0.25 m2) EPA PT: 1.3 ft2 (0.12m2) 2.8 ft2 (0.25 m2) Square: 16-1/8 (40.9) 21-1/2 (54.6)

Flat lens height: 9-3/8 (23.8) 14 (35.6) Drop lens height: 11-3/8 (29.0) 17 (43.2) PT overall height: 18 (45.7) 22-3/4 (57.8)

Weight: 29 lbs (13.2 kg) 55 lbs (24.9 kg)


PRODUCT INFORMATION

LITHO

NIA

OU

TDO

OR


AR

EA LIG

HTIN

G

14(35.6)

21-1/2 (54.6)Arm

KVF POLE COMBOIntended Use



car lots.

Construction

Heavy-gauge, die-formed

aluminum housing is

fabricated using robotic con-

tinuous seam-weld process


Integral structural support

plate for mounting arm

and electrical components

ensures rigidity and strength.

Hinged aluminum doorframe

incorporates stainless steel

hardware. Continuous

silicone gasketing surrounds

lens for weather-tight seal.


bronze (DDB).

Optics

Flat lens configurations meet

full-cutoff criteria. Vertical-

lamp reflectors are one-piece

spun and formed anodized

aluminum. Reflectors are

independently designed to

optimize light output for the

lens type.

Electrical






order SCWA option.

Socket: Porcelain, vertically

oriented, mogul-base socket



contact. UL Listed 1500W,

600V. Lamp included.

Installation


square pole mounting.

Listings




Series/Lamp type/Pole height Distribution Pole diameter Arm length Ballast


KV1 1 fixture 250M 25C 25-foot "C" pole

KV2 2 fixtures 320M 30G 30-foot "G" pole

400M

SYMFL Symmetric

ASYFL Asymmetric

5C

5G

09 9 inches

12 12 inches


ORDERING INFORMATION For shortest lead times, configure products using bolded options. Example: KV2400M25C ASYFL 5C 09 SCWA


KV2400M25C ASYFL 5C 09 SCWA CONSISTS OF:QUANTITY CI CODE DESCRIPTION

1 SSS 25 5C DM28 PL DDB SHAFT2 KVF2 400M ASYFL TB SCWA SP09 LPI1 SBC5 DDB U1 ABSSS-51 STC-5 U

MAXIMUM M.P.H. WIND LOAD WITH 1.4 GUSTSPOLE KV1 SINGLE KV2 DOUBLE25' 5C 100 9030' 5G 100 90


Notes1 Must be specified.

SpecificationPRODUCT INFORMATION

LITH

ON

IA O

UTD

OO

R


SpecificationA

REA

LIG

HTI

NG

KVR

Series Lamp type1 Distribution1, 9 Voltage Ballast Mounting

KVR1

KVR2


70S

100S

150S

250S

400S

1000S3

Metal halide

50M2, 4

70M2, 4

100M2

150M

175M5

200M5, 6

250M

320M6

350M6

400M

450M6

1000M7


50MHC2, 4

70MHC2, 4

100MHC2

150MHC


2/26DTT

2/26TRT2/32TRT

42 TRT

57TRT

70TRT

Induction2

55IL

85IL

Horizontal lamp

R2 Type II roadway





SR4W Type IV segm, FT, wide10

Vertical lamp

SYM Symmetric

ASY Asymmetric

VFA Vertical FT, automotive10

120

20811

24011

277

347

48011

TB12

23050HZ13

MVOLT14

TVOLT15




Arm mounting16

SPD09 9" arm for square pole

RPD09 9" arm for round pole

WBD09 9" arm for wall

WWD09 9" arm for wood pole or wall

SPD12 12" arm for square pole

RPD12 12" arm for round pole

Mounting (continued) Options Finish Lamped

WBD12 12" arm for wall

WWD12 12" arm for wood pole or wall

Post-top mounting


Ships installed








KW1 KiloWatch 120V control relay20

KW4 KiloWatch 277V control relay20

TLS Tool-less access

EHS External house-side shield

EHSB External house-side shield black




Ships separately21






VG Vandal guard22


DBL Black

DGC Charcoal gray

DMB Medium bronze


DWH White



LPI Lamp included

L/LP Less lamp

Intended Use

For streets, parking lots and

surrounding areas.

Construction

Housing: Cylindrically shaped,

rugged, heavy-gauge, spun alu-

minum housing. Fully gasketed

for weathertight integrity.



Optional linear embossed

accent reveals are available.

Arm-mounted KVR2 standard

doorframe is natural aluminum

(DNA). Additional architectural



Optics

KVR vertical-lamp reflectors

are one-piece spun and

formed around anodized alu-

minum. KVR horizontal-lamp

hydroformed and segmented

reflectors also available. KVR

reflectors are rotatable and

interchangeable.

Lens: Impact-resistant, clear,

3/16 " thick, tempered drop

or flat lens.

Electrical











MH: Super CWA Pulse Start





for U.S. shipments only.

CSA, NOM or INTL required

for probe start shipments

outside the U.S. Compact

fluorescent uses an electronic

high-frequency ballast.

High-frequency generator

for induction.


socket for KVR2 (1000S is 5K

pulse rated), medium base

for KVR1 with copper alloy,



1500W-600V, 4KV pulse rated.


Installation

Mounting: Extruded-alu-

minum contoured arm with

integral splice compartment

for wall or pole mounting is

shipped in fixture carton. Op-

tional mountings available.

Listings




wet locations.

ORDERING INFORMATION For shortest lead times, configure products using bolded options. Example: KVR2 250M SYMDL 120 SCWA RPD09 LPI


CONFIGURATIONSSERIES LAMP TYPE DISTRIBUTIONKVR1 55IL, 85IL Not Required

KVR12/26DTT, 2/26TRT,

2/32TRTSYMDL, SYMFL, ASYDL,

ASYFL, SR3DL, SR3FL

KVR1 57TRT, 70TRTSR2DL, SR3DL, SR4SCDL,

SR5SDL

KVR1

42TRT, 50M, 50MHC, 70S, 70M, 70MHC, 100S,

100M, 100MHC, 150S, 150M, 150MHC, 175M

SYMDL, SYMFL, ASYDL, ASYFL, SR2DL, SR2FL,

SR3DL, SR3FL, SR4SCDL, SR4SCFL, SR5DL, SR5FL

KVR1 175M SCWA, 200MSYMDL, SYMFL, ASYDL,

ASYFL

KVR2175M, 250S, 250M, 320M, 350M, 400S,

400M

SYMDL, SYMFL, ASYDL, ASYFL, VFADL, VFAFL,

R2DL, R2FL, R3DL, R3FL, SR2FL, SR3FL, SR4SCFL,

SR4WFL

KVR2 1000M, 1000SSYMDL, SYMFL, ASYDL,

ASYFL




3 Drop lens uses standard E25 lamp. Flat lens uses reduced jacket lamp.

4 Not available in 480V.

5 KVR1 175M SCWA and 200M SCWA are only available with ASY or SYM.


7 Must use reduced jacket lamp.


9 Designate DL (drop lens) of FL (flat lens) after distribution (e.g., SR2FL).KVR2 with SR2, SR3, SR4SC, SR4W only available with flat lens.

10 Not available with KVR1.





15 Tri-volt electronic ballast (induction only) capable of operating any line voltage between 200V and 277V.



18 Not available 347, 480, or TB. Only available with KVR1.

19 Only available KVR2. Photocell not included.

20 Available with 200M-400M SCWA: SYM, AS or VFA; 250S or 400S: all distributions.


22 Prefix with fixture name and size (e.g., KVR1VG).

H

Dia.

H

Dia.

KVR1 KVR2 EPA arm: 1.0 ft2 (0.09 m2) 2.1 ft2 (0.20 m2) EPA PT: 1.2 ft2 (0.11 m2) 2.5 ft2 (0.23 m2) Diameter: 17 (43.1) 26 (66.0)

Flat lens height: 9-1/4 (23.5) 14 (35.6) Drop lens height: 10 (25.4) 17 (43.2) PT overall height: 18- 3/4 (47.6) 23-1/2 (59.7)

Weight: 35 lbs (15.9 kg) 56 lbs (25 kg)


PRODUCT INFORMATION

LITHO

NIA

OU

TDO

OR


Specification AR

EA LIG

HTIN

G

KAR

Series Lamp type1 Distribution1 Voltage Ballast Mounting10,11

KAR1

KAR2

KAR3


150S

250S

400S

1000S

Metal halide

100M2

150M

175M3

200M4

250M

320M4

350M4

400M

1000M


100MHC2

150MHC

R2 Type II roadway


R4 Type IV, FT6

R5S Type V symmetric square

120

2087

2407

277

347

4807

TB8

23050HZ9




Ships separately12

SPD09 9" contoured arm for square pole

RPD09 9" contoured arm for round pole

WBD09 9" contoured arm for wall




DAD12P 12" contoured degree arm for pole

DAD12WB 12" contoured degree arm for wall



Ships installed











Ships separately10






VG Vandal guard15


DBL Black

DGC Charcoal gray

DMB Medium bronze


DWH White



LPI Lamp included

L/LP Less lamp

Intended Use

For parking lots, plazas

or entrances.

Construction


gauge, spun-aluminum hous-

ing in centriform shape.

Doorframe: Aluminum door

frame standard with 1/8 "

impact-resistant, tempered-

glass lens. Stainless steel ex-

ternal hardware. One-piece

EPT closed-cell gasket.

Finish: Dark bronze polyes-

ter powder finish standard.




Optics

Anodized, hydroformed alu-

minum reflectors. Four cutoff



R4 (forward throw) and R5S

(symmetric). R4 reflector is

field-rotatable. Reflectors

hinge out for easy installa-

tion and maintenance.

Electrical

All ballasts are 100% factory
















Socket: Horizontally ori-

ented mogul-base porcelain

socket (100M and 150M are

medium-base) with copper

alloy, nickel-plated screw

shell and center contact. UL

Listed 1500W-600V. 4KV

pulse rated. (1000S is 5KV

pulse rated.)

Installation

Mounting: Contoured,

extruded-aluminum 9"

(KAR1/KAR2) and 12" (KAR3)

arms with integral splice

compartment for pole or wall

mounting. Optional mount-

ings available.

Listings



Listed for wet locations.

ORDERING INFORMATION For shortest lead times, configure products using bolded options. Example: KAR3 1000S R4 TB RPD12 LPI



KAR1100M, 100MHC, 150S, 150M, 150MHC, 175M, 200M, 250M

R2, R3

KAR2 250S, 320M, 350M, 400S, 400M R2, R3, R4, R5SKAR3 1000S, 1000M R3, R4, R5S

Dia.Arm

H

KAR1 KAR2 KAR3 EPA6: 1.2ft2 (.11m2) 1.5ft2 (.14m2) 2.2ft2 (.20m2) Diameter: 19-1/2 (49.5) 21-1/2 (54.6) 30 (75.6) Height: 9-1/2 (24.1) 11 (27.9) 12-1/2 (31.8) Arm length: 9 (22.9) 9 (22.9) 12 (30.5)Max. weight: 36 lbs (15 kg) 45 lbs (20 kg) 53 lbs (24 kg)




3 Universal, mogul base lamp allows KAR1 and KAR2 to be available with SCWA.



6 HS option available.

7 Must specify CWI for us in Canada.





12 KAR1, KAR2 uses 9" arm, KAR3 uses 12" arm when mounting two luminaries at 90°.



15 Prefix with fixture name and size (e.g., KAR1VG). Not available with KAR3.


PRODUCT INFORMATION

LITH

ON

IA O

UTD

OO

R


AR

EA L

IGH

TIN

GSpecification


KVS1

KVS3


70S

100S

150S

250S

400S

1000S

Metal halide

100M2

150M

175M3

200M4

250M

320M4

350M4

400M

1000M5


100MHC2

150MHC

R2 Type II roadway


R4 Type IV, FT

R5 Type V symmetric

120

2087

2407

277

347

4807

TB8

23050HZ9




Ships separately









Optional mounting (ships installed)

MA Internal mast arm adaptor10

Optional mounting (ships separately)

KMA External mast arm adaptor11, 12



KTMB Twin mounting bar11


Ships installed






MED Medium-base socket11





Ships separately16






VG Vandal guard17


DBL Black

DGC Charcoal gray

DMB Medium bronze


DWH White



LPI Lamp included

L/LP Less lamp

KVSIntended Use

For lighting shopping center

or stadium parking lots.

Construction


gauge aluminum housing.

Square shape, continuously

welded seams for weather-

tight integrity. EPDM closed-

cell housing gasket.

Doorframe: Extruded

aluminum hinged door

frame. All exposed hardware

is stainless steel.






Optics

One-piece, anodized, hydro-

formed aluminum reflector.

Four cutoff distributions

available: R2 (roadway), R3

(asymmetric), R4 (forward

throw) and R5 (symmetric).

Reflectors hinge out for easy

removal during installation/

maintenance. Reflectors not

rotatable. R5 is vertically

lamped; R2, R3, and R4 are

horizontally lamped.

Lens: Impact-resistant flat

glass is standard for KVS1, R2,

R3 and R4. Convex glass lens

is standard with all KVS3 and

KVS1 R5.

Electrical























socket (100M and 150M are

medium-base) with copper



Listed 1500W-600V. 4KV

pulse rated. (1000S is 5KV

pulse rated.)

Installation

Mounting: Extruded 9"

(KVS1) and 12" (KVS3)

arms with integral splice

compartment for wall or pole

mounting. Optional mount-

ing available.

Listings




wet locations.

ORDERING INFORMATION For shortest lead times, configure products using bolded options. Example: KVS1 250S R3 TB SP09 LPI





3 Universal mogul base lamp allows KVS to be available with SCWA.


5 Must use BT37 reduced jacket lamp for 1000M, R2 and R3; R5 uses BT56 standard lamp.





10 KVS3 only. Single/twin, 180° configura-tion.

11 KVS1 only.

12 For use with 6" minimum 2-3/8" OD pipe.



15 Not available R2.


17 KVS1 only. Not available with R5. (To order as an accessory: KVS1VG)


KVS170S, 100S, 100M, 100MHC, 150S,

150M, 150MHC, 175M, 250S, 250MR2, R3, R4, R5

KVS3 320M, 350M, 400S, 400M, 1000M R2, R3, R5KVS3 1000S R5

Arm Square

H

KVS1 KVS3 EPA8: 1.8 ft2 (.17 m2) 3.9 ft2 (.36 m2) Sqaure: 16-3/4 (42.0) 24 (61.0) Height: 10-1/2 (26.0) 16-1/2 (42.0)Max. weight: 33 lbs (15.0 kg) 74 lbs (34.0 kg)


PRODUCT INFORMATION

LITHO

NIA

OU

TDO

OR


LITHO

NIA

OU

TDO

OR

General Purpose

SeriesLamp type Voltage Ballast Mounting Options Finish Lamped

KT1 Low pressure sodium

55L

90L

2/90L

120

2081

2401

277

4801,2


Ships separately

SP04 4" square pole arm

SP06 6" square pole arm3

RP04 4" round pole arm

RP06 6" round pole arm3

WB04 4" wall bracket

WB06 6" wall bracket

KMA Mast arm adapter


Ships installed





Ships separately5






(blank) Dark bronze

DBL Black

DGC Charcoal gray

DMB Medium bronze


DWH White

CR Corrosion-resistant finish

LPI Lamp included

LPIC Lamp included (deluxe/coated)

L/LP Less lamp

KT1Intended Use

For parking lots, walkways,

building facades, indus-

trial sites and entrances.

Designated for intrinsically

dark areas, such as those

surrounding observatories

and sea turtle habitats.

Construction

Housing: Heavy-gauge alu-

minum housing, rectilinear

shape, continuously welded

seams for weather-tight in-

tegrity. Dark bronze polyester

powder finish (DDB) standard;

additional architectural



Doorframe: Natural, anod-


frame with mitered corners,

retained with two hinge pins

and secure with one, quarter-

turn quick-release fastener.

Integrally designed, extruded

silicone gasket provides

weather-proof seal between

housing and frame.

Optics

Lens: Clear glass lens standard.

Electrical

High-reactance autotrans-

former, 100% factory tested

standard.

Listings


Certified (see Options).

Suitable for wet locations.

ORDERING INFORMATION For shortest lead times, configure products using bolded options. Example: KT1 90L 120 SP04 PER LPI


8-1/4(21.0)

29-3/4(75.6)

15-3/4(40.0)

EPA: 2.3 ft2 (0.21m2) (includes arm) Weight: 42 lbs (19 kg)


Notes1 Consult factory for availability in Canada.

2 Reactor ballast.

3 SP06 or RP06, must be used when two or more luminaires are oriented on a 90° drilling pattern.



AR

EA LIG

HTIN

GPRODUCT INFORMATION

LITH

ON

IA O

UTD

OO

R


PRODUCT INFORMATION General PurposeA

REA

LIG

HTI

NG

Series Lamp type Distribution Voltage Ballast Mounting11

KAC

KAD

KADT


70S

100S

150S

250S

400S

Metal halide

70M1, 2

100M1

150M

175M3

200M4

250M

320M4

350M4

400M5


70MHC1, 2

100MHC1

150MHC

KAD/KADT

R2 Type II roadway7


R4 Type IV, FT7

R5S Type V symmetric square

SR2 Type II segmented7

SR3 Type III segmented7


KAC - Lens

FP Flat C73T

DPA Drop acrylic

DPP Drop polycarbonate

120

2088

2408

277

347

4808

TB9

23050HZ10




Ships included









DAD12P 12" contoured degree arm for pole

DAD12WB 12" contoured degree arm for wall


KADWBA Decorative wall bracket (up or down)


Ships installed







PD Power tray16

WTB Terminal block16





Ships separately17






VG Vandal guard18

WG Wire guard18


DBL Black

DGC Charcoal gray

DMB Medium bronze


DWH White



LPI Lamp included

L/LP Less lamp

Intended Use



car lots.

Construction


soft-corner aluminum hous-

ing with 0.12" nominal wall

thickness.

Doorframe: KAD die-cast

doorframe has impact-re-

sistant, tempered glass lens

that is fully gasketed with

one-piece tubular silicone.

KAC die-cast aluminum

doorframe has prismatic,

impact-resistant, tempered

glass, drop dish acrylic lens or

drop dish polycarbonate lens.

Door frame is fully gasketed

with one-piece silicone.

Finish: Dark bronze





Optics

KAD: anodized aluminum

hydro-formed or segmented

reflectors. Four full cutoff



R4 (forward throw) and

R5 (symmetric). High-

performance, segmented

reflectors are rotatable and

field-interchangable. KAC

reflector is optical-quality

aluminum that works in

tandem with a light-diffusing

prismatic lens.

Electrical













order SCWA option) for US



shipments outside the US.


tally oriented medium-base

socket for 70-150W and

mogul-base socket for 175W

and above with copper alloy,



1500W-600V. 4KV pulse rated.

Installation


square pole mounting. KADT

mounts with SPDO4 with

an additional backing plate

and receiver used to mount

suspend tension rod. KADT

mounts 11.27" lower than

specified pole height.

Listings



(see Options). KAD UL Listed

for 25°C ambient and wet

locations. IP65 Rated.

ORDERING INFORMATION For shortest lead times, configure products using bolded options. Example: KAD 400M R3 TB SCWA SPD09 LPI


Notes1 Not available with SCWA.


3 Universal mogul base lamp allows KAD, KADT and KAC to be available with SCWA.


5 Reduced jacket ED28 required for SR2, SR3, & SR4SC optics.


7 HS Option available

8 Must specify CWI for us in Canada.

9 Optional multi-tap ballast (120V, 208V, 240V, 277V). In Canada 120V, 277V, 347V.


11 9" arm required when two or more luminaries are oriented @90°. KADT only available with SPDO4 and only available at 180° orientations.

12 May be ordered as accessory. Not available with KADT.




16 Only available with SR2, SR3, & SR4SC optics.


18 Prefix with fixture name and size (e.g., KADWG).

17-1/2(44.5)

7-1/8(18.1) 11-1/8

(28.3)

KAD/KAC (flat) KAC (drop) EPA: 1.2 ft2 (0.11 m2) 1.4 ft2 (0.13 m2)

Max. weight: 35.9 lbs (16.3 kg) 34 lbs (15.4 kg)


17-1/2 (44.5)

7-1/8(18.1)

KADT EPA: 1.2 ft2 (0.11 m2) Max. weight: 35.9 lbs (16.3 kg)

KAD KAC KADTContour®

LITHO

NIA

OU

TDO

OR


PRODUCT INFORMATION General Purpose AR

EA LIG

HTIN

G

KAD POLE COMBO

Contour®

Intended Use



car lots.

Construction




thickness.

Doorframe: KAD die-cast

doorframe has impact-re-

sistant, tempered glass lens

that is fully gasketed with

one-piece tubular silicone.


powder finish.

Optics

Anodized aluminum

hydroformed reflectors.

IES cutoff distributions: R3

(asymmetric) or R4 (forward

throw). Optional houseside

shield (HS) available.

Electrical






order SCWA option.


tally oriented mogul-base




1500W, 600V. Lamp included.

Installation

Extruded aluminum

contoured arm for square

pole mounting.

Listings




Series/Lamp type/Pole height Distribution Pole diameter Arm length Ballast Options


KC1 1 fixture 250M 16C 16-foot "C" pole

KC2 2 fixtures 400M 20C 20-foot "C" pole

25C 25-foot "C" pole


R4 Type IV, FT

4C (blank) 4 inches

09 9 inches1

SCWA Super CWA ballast HS House-side shield2

ORDERING INFORMATION For shortest lead times, configure products using bolded options. Example: KC2400M25C R3 4C SCWA


KC2400M25C R3 4C SCWA CONSISTS OF:QUANTITY CI CODE DESCRIPTION

1 SSS 25 4C DM28 PL DDB SHAFT2 KAD 400M R3 TB SCWA SPD04 LPI1 SBC4 DDB U1 ABSSS-4C1 STC-4 U

MAXIMUM M.P.H. WIND LOAD WITH 1.4 GUSTSPOLE KC1 SINGLE KC2 DOUBLE

16' 4C 4" or 9" arm 100 10020' 4C 4" or 9" arm 100 100

25' 4C 4" arm 90 9025' 4C 9"arm 90 80

17-1/2(44.5)

7-1/8(18.1)

KAD EPA: 1.2 ft2 (0.11 m2) Max. weight: 35.9 lbs (16.3 kg)


Notes1 9" arm available only with 400M.

2 Ships separately.

LITH

ON

IA O

UTD

OO

R


AR

EA L

IGH

TIN

GContractor Select Stock

SECURITY LIGHTING

Intended Use

Arm-mounted security light

for yards and lots, service roads

and building perimeters.

Construction

Housing: Rugged, die-cast alu-

minum head with photocell.

Optics

Formed aluminum reflectors

and open bottom refractor for

ease of maintenance and lamp

replacement. Prismatic refrac-

tor provides uniform symmetri-

cal Type V distribution.

Installation

Mounting arm (24" or 18"

with TDD65) and all mount-

ing hardware is included in

carton. Photocell and lamp

are included in carton. 120V.

Listings




standards. Fixtures are

covered by Lithonia Light-

ing 12-month warranty

against mechanical defects

in manufacture.

ORDERING INFORMATION

CATALOG NUMBER DESCRIPTION WATTAGE LAMP VOLTAGEMOUNTING ARM

LENGTHLAMP INCLUDED

APPROXIMATE WEIGHT (LBS)

STANDARD CARTON QUANTITY

TDD 100ML 120 M2 12" security light 100 MH 120 24" Y 12 2TDD 100SL 120 M2 12" security light 100 HPS 120 24" Y 12 2TDD 150SL 120 M2 12" security light 150 HPS 120 24" Y 12 2

TDD 65L 120 M2 10" security light 65 Fluorescent 120 18" Y 4 2


12(30.5)

17(43.2)

TDD HID

10-3/4(27.3)

16(40.6)

TDD Fluorescent


PRODUCT INFORMATIONPRODUCT INFORMATION

LITHO

NIA

OU

TDO

OR


BO

LLAR

DS

Architectural

Series Lamp type Distribution Voltage Ballast

ASBX

ASBY

ASBZ

High pressure sodium

50S

70S

100S

150S

Metal halide1

70M

100M

Incandescent

I2

Standard flared cone

R5 Type V distribution

Optional cylindrical reflector

CYA Specular alzak

CYB Black alzak

CYG Gold alzak

CYF Flat black

120

2083

2403

277

347

TB4



Ships installed


DF Double fuse, 208V, 240V

H24 24" overall height



FD Festoon outlet

FG Festoon outlet with duplex ground fault receptacle5


Ships separately6

S8S Half-shield (8" square)

KBAB Anchor bolts

(blank) Textured dark bronze (std.)

DBL Black



DSST Textured sandstone

DNAT Textured natural aluminum

DWHG Textured white

DBLB Textured black

LPI Lamp included

L/LP Less lamp

ASBAeris™

Intended Use

For walkways, plazas or

pedestrian areas.

Construction

Housing: Bottom housing is

0.188" extruded aluminum.

Decorative Aeris™ top cover is

sand-cast with 0.188"mini-

mum wall thickness. 42"

overall height standard.

Flush-fitting lens is 1/4",

clear, 100% virgin acrylic.

Exposed hardware is tamper-

resistant stainless steel.

Four 1/4" x 11" anchor bolts

with double nuts/washers

and 4-1/2" diameter bolt

circle template provided for

mounting (shipped sepa-

rately). Dark bronze textured

(DDBT) corrosion-resistant

polyester powder finish stan-

dard. Additional architectural



Optics

Reflector system incorporates

an anodized, spun aluminum

flared cone and an anodized,

hydroformed, fluted upper

reflector providing a Type V

(symmetric) cutoff distribu-

tion. Optional cylindrical

lower reflector available.

Electrical

Electrical components are

unitized on removable

power module and accessible

through bottom of bollard.

Positive-locking, quick-

disconnect on secondary

circuit. Ballast: All ballasts

are 100% factory tested. High

reactance, high power factor.


base socket, 4KV pulse rated.

Listings




ORDERING INFORMATION For shortest lead times, configure products using bolded options. Example: ASBX 70M R5 TB LPI


42*(106.7)

8(20.3)

8(20.3)

8(20.3)

42*(106.7)

42*(106.7)


* Also available in 24” (H24), 30” (H30) and 36” (H36).

ASBX ASBY ASBZ


Notes1 Requires coated lamp.

2 120V only. 150W max.; lamp not provided.

3 Consult factory for use in Canada.


5 Cover ships separately.


Standardflared cone

Optionalcylindrical reflector

ASBX ASBY ASBZ


LITH

ON

IA O

UTD

OO

R


ArchitecturalB

OLL

AR

DS


MRBX High pressure sodium

35S1

50S

70S

100S

Metal halide2

50M

70M

100M

Incandescent3

I

Compact fluorescent

13DTT

26TRT

32TRT

SYM Type V symmetric distribution

ASY Asymmetric distribution

120

2084

2404

277

3475

TB6

MVOLT7



Ships installed



GLR Internal fast-blow fusing





ELDWC Cold weather emergency battery pack (-20° C start temp)8



Ships separately9

HS Internal half shield10

MRAB Anchor bolts

(blank) Textured dark bronze (std.)

DDBT Textured dark bronze



DWHG Textured white

DBLB Textured black

LPI Lamp included

L/LP Less lamp

Intended Use


pedestrian areas.

Construction

Extruded one-piece alumi-

num, 0.156" wall thickness.

Molded top cover, 0.156" wall

thickness. 42" overall height

standard. 8" nominal diam-

eter tube standard. Three 1/2"

x 11" anchor bolts with double

nuts and washers (shipped

separately). 3-3/4" bolt circle

template included.

Standard finish is textured

dark bronze (DDBT) polyester

powder, electrostatically

applied and oven-cured.




Optics

Two reflector options are

available: Type V symmetric

and asymmetric distribution.

Asymmetric reflector is

adjustable independent of

bollard orientation and can

be adjusted without remov-

ing top cover. Lens is clear,

seamless 100% virgin acrylic,

1/4" wall, flush fitting.

Coated lamp is standard.

Electrical



power module and acces-

sible through top of bollard.







MH: 100W and below are

standard with pulse-start

ignitor technology. Compact

fluorescent electronic high-

frequency multi-volt ballast,

starting temperature 0° F

(-18° C), <10% THD.

Socket: Vertically oriented,

medium-base, pulse-rated

porcelain socket with copper

alloy, nickel-plated shell and

center contact. Compact

fluorescent has four-pin,

white thermoplastic body

with quick-connect push-in

wiring terminals. LPI is

standard 35K for CFL.

Listings




standards for wet locations

(see Options.) NOM Certified

(see Options).

U.S. Patent No. D550,881.

ORDERING INFORMATION For shortest lead times, configure products using bolded options. Example: MRBX 70M ASY 120 LPI


8(20.3)

42*(106.7)

Max. weight: 45 lbs (20.4 kg)

* Also available in 24” (H24), 30” (H30) and 36” (H36)


Notes1 120V only.

2 Requires coated lamp.

3 120V only. 100W max. A19 lamps only.


5 347V not available in 50S.


7 Optional multi-volt electronic ballast (compact fluorescent only) capable of operating any line voltage from 120-277V.

8 Must specify voltage. 120V or 277V only.


10 Ships as: MRBX HS U

MRBX Omero™


LITHO

NIA

OU

TDO

OR


BO

LLAR

DS

Specification

Notes1 Specify lamp type and distribution. See Configurations table.

2 120V only.


4 KB-6: 116W/TS, lamp not included.

5 KB-8: 150W max., lamp not included.

6 Louver must be used. Multi-volt electronic ballast (for compact fluorescent lamps only) capable of operating on any line voltage from 120V-277V.




10 Choose primary fixture finish and stripe color if desired.

Series Lamp type1 Distribution1 Voltage Ballast Options

KBA6

KBA8

KBD6

KBD8


35S2

50S

70S

100S

150S

Metal halide3

50M

70M

100M

Incandescent2, 4, 5

I


26TRT

32TRT




CYA Specular alzak

CYB Black alzak

CYG Gold alzak

Louvers (8" only)

LV Louvers

120

2087

2407

277

347

TB8

MVOLT6

(blank) Magnetic ballast Ships installed






FD Festoon outlet



Ships separately

R6S Half-shield (6" round)


KBAB Anchor bolts

Finish10 Lamped


DWH White

DBL Black

DMB Medium bronze


DSS Sandstone

DGC Charcoal gray

DTG Tennis green

DBR Bright red

DSB Steel blue


SDDB Dark bronze stripe

SDWH White stripe

SDBL Black stripe

SDNA Natural aluminum stripe

SDTG Tennis green stripe

SDBR Bright red stripe

SDBUA Dark blue stripe

SDYLB Yellow stripe

LPI Lamp included

L/LP Less lamp

KBA KBD

Intended Use


pedestrian areas.

Construction

Housing: KB_6: Bottom

housing is 0.125" extruded

aluminum. Top cover is

0.156" cast aluminum. KB_8:

Bottom housing is 0.156"

extruded aluminum. 42"

overall height standard on

KBD and KBA6. 43" overall

height standard on KBA8.

Flush-fitting lens is 1/4 ",

clear, 100% virgin acrylic. All

exposed hardware is tamper-

resistant stainless steel. Four

1/2" x 11" anchor bolts with

double nuts/washers and 4-

1/2" diameter bolt circle tem-

plate provided for mounting

(shipped separately).

Finish: Dark bronze (DDB)

corrosion-resistant polyester





Optics


an anodized, spun aluminum,





tion. Optional cylindrical

lower reflector or cast alumi-

num louvers available.

Electrical








are 100% factory tested. High

reactance, high power factor

for 150W and below. Compact



Socket: Medium-base porce-

lain socket, 4KV pulse rated.

Compact fluorescent has

four-pin, white thermoplastic

body with quick-connect

push-in wiring terminals. LPI

is standard 35K for CFL.

Listings




ORDERING INFORMATION For shortest lead times, configure products using bolded options. Example: KBA8 70M R5 TB LPI



KBA6, KBD6 35S, 50S, 50M, 70S, 70M, I R5, CYA, CYB, CYG, CYFKBA8, KBD8 50S, 70S, 70M, 100S, 100M, 150S, I R5, CYA, CYB, CYG, CYF, LVKBA8, KBD8 26TRT, 32TRT LV

42*(106.7)

42*(106.7)

KBD6 KBD8-LVKBA6 KBA8-LV

* Also available in 24" (H24), 30" (H30) and 36" (H36).

6(15.2)

8(20.3)

6(15.2)

8(20.3)



Standardflared cone


Louver

KBD KBA


LITH

ON

IA O

UTD

OO

R


SpecificationB

OLL

AR

DS


KBC6

KBC8

KBR6

KBR8


35S2

50S

70S

100S

150S

Metal halide3

50M

70M

100M

Incandescent

I2, 4, 5


26TRT

32TRT




CYA Specular alzak

CYB Black alzak

CYG Gold alzak

CYF Flat black

Louvers (8" only)

LV Louvers

120

2087

2407

277

347

TB8

MVOLT6


Installed





FD Festoon outlet9


CSA Meets Canadian Standards

Options (continued) Finish10 Lamped

Shipped separately




DWH White

DBL Black

DMB Medium bronze


DSS Sandstone

DGC Charcoal gray

DTG Tennis green

DBR Bright red

DSB Steel blue



SDWH White stripe

SDBL Black stripe





SDYLB Yellow stripe

LPI Lamp included

L/LP Less lamp

Intended Use


pedestrian areas.

Construction

Housing: KB_6: Bottom

housing is 0.125" extruded

aluminum. Top cover is

0.156" cast aluminum. KB_8:

Bottom housing is 0.156" ex-

truded aluminum. 42" overall

height standard. Flush-fitting

lens is 1/2", clear, 100%

virgin acrylic. All exposed

hardware is tamper-resistant

stainless steel. Four 1/2" x

11" anchor bolts with double

nuts/washers and 4-1/2"

diameter bolt circle template

provided for mounting



bronze polyester powder fin-

ish. Additional architectural



Optics


an anodized, spun aluminum,





tion. Optional cylindrical lower

reflector or cast-aluminum

louvers are available.

Electrical


tested. Electrical components




Positive-locking, quick-dis-

connect on secondary circuit.

Compact fluorescent uses an

electronic high-frequency

multi-volt ballast.

Socket: Medium-base porce-

lain socket, 4KV pulse rated.

Compact fluorescent has

four-pin, white thermoplastic

body with quick-connect

push-in wiring terminals. LPI


Listings




ORDERING INFORMATION For shortest lead times, configure products using bolded options. Example: KBR8 100M R5 120 CR LPI



KBC6, KBR6 35S, 50S, 50M, 70S, 70M, I R5, CYA, CYB, CYG, CYFKBC8, KBR8 50S, 70S, 70M, 100S, 100M, 150S, I R5, CYA, CYB, CYG, CYF, LVKBC8, KBR8 26TRT, 32TRT LV


2 120V only.

3 Use coated lamp.



6 Louver must be used. Multi-volt electronic ballast (for compact fluorescent lamps only) capable of operating on any line voltage from 120V-277V.





KBR6 KBR8-LVKBC6 KBC8-LV

42*(106.7)

42*(106.7)

* Also available in 24" (H24), 30" (H30) and 36" (H36).

6(15.2)

8(20.3)

6(15.2)

8(20.3)



Standardflared cone


Louver

KBC KBR

KBCKBR

PRODUCT INFORMATION

LITHO

NIA

OU

TDO

OR


BO

LLAR

DS

Specification


KBS6

KBS8

KBE6

KBE8


35S2

50S

70S

100S

150S

Metal halide3

50M

70M

100M

Incandescent

I2, 4, 5




CYA Specular alzak

CYB Black alzak

CYG Gold alzak

CYF Flat black

120

2086

2406

277

347

TB7


Ships installed






FD Festoon outlet



Ships separately



KBAB Anchor bolts

Finish9 Lamped


DWH White

DBL Black

DMB Medium bronze


DSS Sandstone

DGC Charcoal gray

DTG Tennis green

DBR Bright red

DSB Steel blue



SDWH White stripe

SDBL Black stripe





SDYLB Yellow stripe

LPI Lamp included

L/LP Less lamp

KBS KBE

Intended Use


pedestrian areas.

Construction

Housing: Bottom housing is

0.188" extruded aluminum.

Top cover is a weldment of

0.188" aluminum extrusion

and 0.250" aluminum plate.

42" overall height standard.

Flush-fitting lens is 1/4",

clear, 100% virgin acrylic.

Exposed hardware is tamper-

resistant stainless steel. Four

1/2" x 11" anchor bolts with

double nuts/washers and 4-

1/2" diameter bolt circle tem-

plate provided for mounting







Optics


an anodized, spun aluminum



reflector providing a Type

V (symmetric) distribution.

Optional cylindrical lower

reflector available.

Electrical

Ballasts are 100% factory

tested. Electrical components

are unitized on removable




disconnect on secondary cir-

cuit. Medium-base porcelain

socket, 4KV pulse rated.

Listings




ORDERING INFORMATION For shortest lead times, configure products using bolded options. Example: KBS6 70M R5 TB LPI



KBE6, KBS6 35S, 50S, 50M, 70S, 70M, I R5, CYA, CYB, CYG, CYFKBE8, KBS8 50S, 70S, 70M, 100S, 100M, 150S, I R5, CYA, CYB, CYG, CYF



2 120V only.








KBE6 KBE8KBS6 KBS8

* Also available in 24" (H24), 30" (H30) and 36" (H36).Max. weight: 43.2 lbs (19.6 kg)

42*(106.7)

42*(106.7)

6(15.2)

8(20.3)

6(15.2)

8(20.3)


KBS KBE

Standardflared cone


PRODUCT INFORMATION

LITH

ON

IA O

UTD

OO

R


ArchitecturalW

ALL

MO

UN

TED

Series Lamp type1 Distribution1 Voltage Ballast Mounting Options

ASW1

ASW2


70S

100S

150S

200S

250S

400S

Metal halide

70M2, 3

100M2

150M

175M4

200M5

250M

320M5

350M5

400M


70MHC2, 3

100MHC2

150MHC

Compact Fluorescent2

2/26DTT7

32TRT

2/32TRT7

42TRT

2/42TRT7

57TRT

70TRT

Induction2

70IL

SR2 Segmented type II, roadway8

SR3 Segmented type III, asymmetric8

SR4SC Segmented type IV, FT, sharp cutoff

SR4W Segmented type IV wide, FT (ASW2 only)8

GZ Wall grazing9, 10

SP Spot10, 11, 12

120

20813

24013

277

347

48013

TB14

MVOLT15

23050HZ16




Ships installed

(blank) Mounting plate (std.)

Ships separately17, 18, 19

BBW Surface-mounted back box

Ships installed




ELDW Bodine emergency battery pack20

ELDWR Fixture wired ready for Bodine B30 battery pack21

ELDWRPS Fixture wired ready for PS1400 or PSDL battery pack21, 22


Options (continued) Finish Lamped


QRSTD QRS time delay (ASW2 only)11, 23

DC12 Emergency circuit 12V; 35W lamp included9, 11

2DC12 Emergency circuit 12V; two 35W lamps included9, 11









VG Vandal guard

WG Wire guard

(blank) Dark bronze, textured (std.)

DSST Sandstone-textured

DNAT Natural aluminum-textured

DWHG White-textured

DBLB Black-textured

DDB Dark bronze




LPI Lamp included

L/LP Less lamp

ASWAeris™

Intended UseFor building- and wall-mounted applications.

ConstructionHousing: Rugged, die-cast, single-piece aluminum hous-ing. Die-cast door frame has impact-resistant, tempered glass lens. Door frame is fully sealed with a closed cell silicone gasket. Standard finish is textured dark bronze (DDBT) polyester powder. Additional architectural colors are available; see www.lithonia.com/archcolors.

OpticsHigh-performance, segmented reflectors provide superior uniformity and

control. Specialty anodized aluminum spot and grazer optics also are available. Re-flectors are interchangeable and have field degree aiming capability up to 10° without tools. Reflectors allow for tool-less access to electrical components. All optics meet IES full cutoff criteria in lens-down orientation.

ElectricalBallast: All ballasts are 100% factory tested. HPS: High reactance, high power factor for 150W and below. Constant wattage autotransformer 175W and above. MH: 150W and below are standard with pulse-start ignitor technology. Super

CWA Pulse Start ballasts, 88% efficient and EISA legislation compliant, are required for 151-400W (must order SCWA option) for U.S. shipments only. CSA, NOM or INTL required for probe start shipments outside the U.S. Compact fluorescent uses an electronic high-frequency ballast.

High-frequency generator for induction.

Socket: Porcelain, medium-base socket for ASW1, mogul-base socket for ASW2, with copper alloy, nickel-plated screw shell and center contact. Fluorescent is four-pin positive latching

thermoplastic. UL Listed. Compact fluorescent uses an electronic high-frequency ballast. LPI is standard 35K for CFL.

InstallationUniversal mounting plate with integral mounting bolts supports the fixture for easy one-person installation. Can mount facing up.

ListingsUL Listed to U.S. and Cana-dian safety standards. CSA Certified or NOM Certified (see Options). UL Listed suit-able for wet locations in up or down orientation. IP65 rated. U.S. Patent No. D500,569. Other patents pending.

ORDERING INFORMATION For shortest lead times, configure products using bolded options. Example: ASW1 100M SR3 120 LPI


H

DW

ASW1 ASW2 Width: 15 (38.1) 20-1/4 (51.4)

Depth: 13-3/4 (34.9) 18-3/4 (47.6)Height: 9-1/4 (25.5) 12-1/2 (31.8)Weight: 35 lbs (15.9 kg) 49 lbs (22.2 kg)





4 Not available ASW1 SCWA.



7 Available with SR3 only.

8 HS Option available.

9 DC options and GZ cannot be ordered together (ASW1 only).

10 Not available with compact fluorescent.

11 EC, QRS, QRSTD, DC options or SP cannot be ordered together.

12 Not available with HPS.

13 Must specify CWI for use in Canada

14 Optional multi-tap ballast (120V, 208V, 240V, 277V). In Canada 120V, 277V, 347V; ship as 120/347V.

15 Optional multi-volt electronic ballast (compact fluorescent only) capable of

operating on any line voltage between 120V and 277V.




19 Prefix with fixture name and size (e.g., ASW2VG) when ordered as accessory.

20 Available for compact fluorescent units only; not available with 2/32TRT, 2/42TRT, 57TRT or 70TRT.

21 Battery pack (not included) to be mounted external to luminaire. Pilot light/test switch mounting plate included. 32°F min. operating temperature.

22 Not available with 2/42TRT.


24 Must be ordered with fixture; cannot be field installed. Not available 347V, 480V, or TB.

25 Only available with SR2 & SR3; SR4W (size 2 only).

CONFIGURATIONSSERIES LAMP TYPE DISTRIBUTIONASW1 70S, 100S, 150S SR2, SR3, SR4SC, GZASW1 26TRT, 2/32TRT, 2/42TRT SR3ASW1 32TRT, 42TRT, 57TRT, 70TRT SR2, SR3, SR4SC

ASW170M, 70MHC, 100M, 100MHC,

150M, 150MHC, 175MSR2, SR3, SR4SC, GZ, SP

ASW2175M, 200M, 250M, 320M,

350M, 400MSR2, SR3, SR4SC,

SR4W, SPASW2 200S, 250S, 400S SR2, SR3, SR4SC, SR4W

LAMP/FIXTURE DATALAMP TYPE CIRCUIT TYPE LAMP SHAPE BASE

70S, 100S, 150S HX-HPF E17 Medium250S, 400S CWA ET18 Mogul70M, 100M,

150M, 70MHC, 100MHC, 150MHC

HX-HPF E17 Medium

175M, 175MHC CWA E17 Medium250M, 250MHC CWA BT28 Mogul400M, 400MHC CWA ED28 Mogul

26DTT Electronic, HPF T4 G24Q-332TRT Electronic, HPF T4 GX24Q-342TRT Electronic, HPF T4 GX24Q-457TRT Electronic, HPF T4 GX24Q-570DTT Electronic, HPF T4 GX24Q-6


PRODUCT INFORMATION

LITHO

NIA

OU

TDO

OR


ArchitecturalW

ALL MO

UN

TED

Series Lamp type Distribution Voltage Ballast Mounting Options

MRW High pressure sodium1

35S2

50S

70S

100S

150S

Metal halide

50M1, 3

70M1, 3

100M1

150M

175M4


50MHC1, 3

70MHC1, 3

100MHC1

150MHC

Compact fl uorescent1

26DTT

2/26DTT

26TRT

2/26TRT

32TRT

2/32TRT

42TRT

2/42TRT

FT Forward Throw

MD Medium throw

WT Wide throw

120

2086

2406

277

347

4806

TB7

MVOLT8

23050HZ9




Ships installed



BBW Surface-mounted back box13

UT5 Uptilt 5 degrees bracket14

Ships installed



ELDW Bodine emergency battery pack15, 16, 17

ELDWR Fixture wired ready for Bodine B30 battery pack15, 16, 18

ELDWRPS Fixture wired ready for PS1400 or PSDL battery pack15, 16, 18, 19




ELED LED emergency single16, 21, 22

2ELED LED emergency double16, 21, 22






DFL Diff using lens

IBS Internal backlight shield25

WLU Wet location door for up orientation



INTL International shipment for 175M.


VG Vandal guard

WG Wire guard




DWHG White-textured

DBLB Black-textured

DDB Dark bronze



LPI Lamp included27

L/LP Less lamp

MRWOmero™

Intended Use

For building- and wall-

mounted applications.

Construction



Die-cast doorframe has a

1/8" thick tempered glass

lens. Doorframe is fully


solid silicone.

Standard fi nish is textured

dark bronze (DDBT)


powder fi nish. Additional

architectural colors are

available; see


Striping is also available.

Optics

Segmented refl ectors

provide superior uniformity

and control. Refl ectors are

interchangeable. Three full

cutoff distributions available:

FT (forward throw), MD

(medium throw) and WT

(wide throw).

Electrical






175W. MH: 150W and below


ignitor technology. CSA, NOM

or INTL required for probe

start shipments outside the

U.S. for 175M. Not available

with 175M SCWA. Compact




base socket for MRW with

copper alloy, nickel-plated


tact. Fluorescent is four-pin

positive latching thermo-

plastic. UL Listed. Compact


high-frequency ballast. LPI is


Installation

Universal mounting mecha-

nism with integral mounting

support allows fi xture to

hinge down. Bubble level

provides correct alignment

with every installation.

Listings

UL Listed to U.S. and Canadian

safety standards. NOM Certi-

fi ed (see Options). UL listed

suitable for wet locations

(damp location listed in lens

up orientation). WLU option

off ers wet location listing in

up orientation (see Options).

IP65 rated. 25°C ambient.

U.S. patent No. D565.232.

ORDERING INFORMATION For shortest lead times, confi gure products using bolded options. Example: MRW 100M FT TB LPI


18(45.7)

9(22.8)

7-1/4(18.2)

Weight: 35 lbs (15.9 kg)



2 120V, NPF only.





7 Optional multi-tap ballast (120, 208, 240, 277V); (120, 277, 347V in Canada; ships as 120V/347V).

8 Optional multi-volt electronic ballast (compact fl uorescent only) capable of operating any line voltage from 120V-277V.





13 Order WSBBW when needed as an accessory.

14 Order WSUT5 when needed as an accessory.

15 Available for compact fl uorescent units only. Must specify voltage.

16 Only one emergency option available per fi xture.

17 Not available with 2/32TRT or 2/42TRT.


19 Not available with 2/42TRT.


21 Available in 120V or 277V only.

22 Maximum wattage 100M or 70S.

23 Not available with fusing.

24 Must be ordered with fi xture; cannot be fi eld installed. Not available 347V, 480V, or TB.

25 Not available with medium throw.

26 Prefi x with fi xture name and size (e.g., MRWVG)

27 For medium throw distribution, lamp is coated.

PRODUCT INFORMATION

LITH

ON

IA O

UTD

OO

R


Series Lamp type Distribution Voltage Ballast Mounting

WSQ Quartersphere

WSR Half round

WST Trapezoid


35S2

50S

70S

100S

150S

Metal halide

50M1, 3

70M1, 3

100M1

150M

175M4


50MHC1, 3

70MHC1, 3

100MHC1

150MHC

Compact fl uorescent1, 6

26DTT

2/26DTT

32TRT

2/32TRT

42TRT

2/42TRT

Downlight distribution

FT Forward throw

MD Medium throw

WT Wide throw

Up/Down distribution7, 8

FTU Forward throw with 10% uplight

MDU Medium throw with 10% uplight

MDU5 50% Up/down medium throw

WTU Wide throw with 10% uplight9

120

20810

24010

277

347

48010

TB11

MVOLT12

23050HZ13




Ships installed



BBW Surface-mounted back box16



Ships installed



GMF Internal slow-blow fusing18

ELDW Bodine emergency battery pack18, 19, 20, 21

ELDWR Fixture wired ready for Bodine B30 battery pack18, 19, 20, 22

ELDWRPS Fixture wired ready for PS1400 or PSDL battery pack18, 19, 20, 22, 23



ELED LED emergency single20, 25

2ELED LED emergency double20, 25





PE Photoelectric cell - button type19, 27

DFL Diff using lens

IBS Internal backlight shield28

UCS Uplight component shield29

WLU Wet location door for up orientation





VG Vandal guard

WG Wire guard



DWHG White-textured

DBLB Black-textured



LPI Lamp included31

L/LP Less lamp

WAL

L M

OU

NTE

DArchitectural

WSTWSRWSQ

Intended UseFor building- and wall-mounted applications.

ConstructionHousing: Rugged, die-cast, single-piece housing. Die-cast doorframe has 1/8" thick tem-pered glass lens. Doorframe is fully gasketed with one-piece solid silicone. Standard fi nish is textured dark bronze (DDBT) corrosion-resistant polyester powder. Additional architec-tural colors are available; see www.lithonia.com/archcolors. Striping is also available.

OpticsInterchangeable, segmented refl ectors for superior unifor-

mity and control. Three full cutoff distributions available: FT (forward throw), MD (me-dium throw) and WT (wide throw). Four uplight distribu-tions available in WSR only: FTU (forward throw, 10% up), MDU (medium throw, 10% up), WTU (wide throw, 10% up) and MDU5 (up/down, medium throw, 50% up, 50% down). Compact fl uorescent MD (medium throw) only.

ElectricalBallast: All ballasts are 100% factory tested. Reactor high power factor for 35S. High reactance, high power factor for 50-150W. Constant wattage autotransformer for

175W. MH: 150W and below are standard with pulse-start ignitor technology. CSA, NOM or INTL required for probe start shipments outside the U.S. for 175M. Not available 175M SCWA. Compact fl uorescent uses an electronic high-frequency ballast.

Socket: HID is porcelain, medium-base copper alloy, nickel-plated screw shell and center contact. (UL Listed 660W, 600V 4KV pulse rated). Fluorescent is four-pin posi-tive latching thermoplastic. LPI is standard 35K for CFL.

InstallationUniversal mounting mecha-nism with integral mounting support allows fi xture to hinge down. Bubble level provides correct alignment with each installation.

ListingsUL Listed suitable for wet locations (damp location listed in lens-up orientation). CSA Certifi ed (see Options). IP65 rated.

ORDERING INFORMATION For shortest lead times, confi gure products using bolded options. Example: WST 100M FT 120 PE LPI

WST

16-1/4(41.2)

7-1/4(18.4)

9-1/8(23.2)


18(45.7)

7-1/4(18.4)

9(22.8)

WSR


18(45.7)

9-3/8(23.8)

9(22.8)

WSQ


2 120V only.




6 Only available with MD, MDU and MDU5 distributions.

7 Available on WSR fi xture only.

8 Must be ordered with fi xture; no fi eld modifi cations.

9 Colored uplight lens available. See www.lithonia.com. Only available with WTU distribution.



12 Optional multi-volt electronic ballast (compact fl uorescent only) capable of operating on any line voltage from 120V-277V.




16 Order as WSBBW for accessory.

17 Order as WSUT5 for accessory.

18 Available for compact fl uorescent units only.

19 Must specify voltage.

20 Only one emergency option available per fi xture.

21 Not available with 2/32TRT or 2/42TRT.


23 Not available 2/42TRT.


25 Available 120V or 277V only. Maximum wattage 100M or 70S.

26 Not available with fusing.

27 Not available 347V, 480V, or TB.

28 Not available with medium throw.

29 For WSR, inverted orientation, with FTU and WTU distributions only.

30 Prefi x with fi xture name (e.g., WSRVG) for accessory. WSQ ships same as WSR.



WST

WSR

WSQ

PRODUCT INFORMATION

LITHO

NIA

OU

TDO

OR


WALL M

OU

NTED

Architectural

Series Lamp type Distribution Voltage Ballast Mounting Options

WSTM High pressure sodium

35S1

50S

70S

Metal halide

50M

70M


50MHC

70MHC

Compact fl uorescent

26DTT

26TRT

32TRT

42TRT

MD Medium throw 120

2083

2403

277

347

TB4

MVOLT5

23050HZ6



Ships installed


Ships separately


Ships installed









PE Photoelectric cell - button type12, 13

DFL Diff using lens



Ships separately

WG Wire guard12

Fixture




DWHG White-textured

DBLB Black-textured



Optional stripe


SDWH White stripe

SDBL Black stripe


SDSS Sandstone stripe




SDYLB Yellow stripe

LPI Lamp included14

L/LP Less lamp

WSTMIntended Use



Construction



Die-cast doorframe has a

1/8" thick tempered glass

lens. Doorframe is fully


solid silicone.

Standard fi nish is textured

dark bronze (DDBT)


powder fi nish. Additional

architectural colors are

available; see


Striping is also available.

Optics

Hydroformed refl ector for

superior uniformity and

control. Medium throw (MD)

full cut off distribution only.

Electrical


factory tested. Reactor high

power factor for 35S. High


for 50-70W. MH: 70W and

below are standard with


ogy. Compact fl uorescent

utilizes an electronic, high-

frequency ballast.


base socket with copper alloy,

nickel-plated screw shell and

center contact. Fluorescent



35K for CFL. UL Listed.

Installation

Easily installed using provid-

ed mounting strap. Mount to

any non-combustible vertical

surface or to a 4" round or

square outlet box. Back access

through slotted gasket.

Listings


standards. Listed and

labeled to CSA standards (see

Options). NOM Certifi ed (see

Options). IP65 rated. Wet

location listed.

ORDERING INFORMATION For shortest lead times, confi gure products using bolded options. Example: WSTM 70M MD 120 LPI


12-1/2(31.8)

5-3/4(14.6)

7-1/2(19.1)

Max. weight: 14 lbs. (6.35 kg)


Notes1 120V only.




5 Multi-volt electronic ballast (compact fl uorescent only) capable of operating on any line voltage between 120V and 277V.


7 May be ordered as an accessory. Must specify fi nish. Order as WSUT5.

8 CFL only. Must specify voltage. Not available with MVOLT.

9 Maximum wattage lamp included.

10 Available for HID only.

11 Not available with SF or DF.

12 Must be ordered with fi xture; cannot be fi eld installed.

13 Not available in 347V or TB.


PRODUCT INFORMATION

LITH

ON

IA O

UTD

OO

R


WAL

L M

OU

NTE

DArchitectural

WFL


WFL2

WFL3


70S

100S

150S

250S

400S

Metal halide

70M2, 3

100M2

150M

175M4

200M5

250M

320M5

350M5, 6

400M6


70MHC2, 3

100MHC2

150MHC

GZ Wall grazing

SP Spot

BP Bi-peak symmetric8

FT Forward throw

HPM Medium asymmetric

HPN Narrow asymmetric

HPW Wide asymmetric

RM Medium symmetric

RN Narrow symmetric

RW Wide symmetric

120

2089

2409

277

347

4809

TB10

23050HZ11




Ships installed


Ships separately12, 13, 14



Ships installed






LC90 Lock at 90 degrees for full cutoff





BD Barn door13

BV Bottom visor13

BVG Bubble vandal guard

EV Eggcrate visor (black only)

FV Full visor13

UV Upper visor13

UV/BVG Upper visor and bubble vandal guard13

VG Vandal guard

WG Wire guard13

(blank) Dark bronze

DWH White

DBL Black

DMB Medium bronze


DGYL Gray



LPI Lamp included

L/LP Less lamp

Intended Use



Construction

Housing: Extruded aluminum

body with cast end caps is

mounted with 1/4" bolts, to

formed steel wall bracket.

Housing body can be rotated

and locked in any position

along horizontal axis. Cast

aluminum lens frame is

hinged and secured by

stainless steel fasteners.

Closed cell silicone gasket

prevents the penetration

of dust and moisture. Clear,


glass lens with silkscreen.



resistant polyester powder.


colors are available; see


Optics

Anodized aluminum

reflectors: Segmented,

specular or hammertone

finish. Reflectors are field

interchangeable.

Electrical

















outside the U.S.

Socket: Horizontal porcelain

socket (WFL2 medium-base,

WFL3 mogul-base) with



tact. UL Listed 660W, 600V

4KV pulse rated.

Installation

Steel mounting plate attaches

directly to industry standard

junction box. Mounting

plate includes provision for

attachment independent of

junction box (required for

WFL3). Optional backbox wall

mounting available for surface

conduit applications.

Listings




wet locations. IP65 rated.

ORDERING INFORMATION For shortest lead times, configure products using bolded options. Example: WFL2 100M FT 120 LPI



WFL270S, 70M, 70MHC, 100S, 100M, 100MHC, 150S, 150M, 150MHC,

175M

SP, BP, RN, RM, RW, HPN, HPM, HPW, FT, GZ

WFL3175M, 200M, 250S, 250M, 320M,

350M, 400S, 400MSP, RN, RM, RW, HPN, HPM, HPW,

FT, GZ

LAMP/FIXTURE DATALAMP TYPE

NEMA DIST.

CIRCUIT LAMP

SHAPEBASE

BEAM SPREAD

H° x V°

150S SP HX-HPF E17 Medium 142x127 7x6150S HPW HX-HPF E17 Medium 39x12 3x1400S SP CWA ET18 Mogul 60x13 4x1400S HPW CWA ET18 Mogul 144x140 7x7175M SP CWA ED17 Medium 27x15 2x1175M HPW CWA ED17 Medium 147x127 7x6400M SP CWA BT28 Mogul 42x17 3x1400M HPW CWA BT28 Mogul 146x140 7x7

W D

H

WFL2 WFL3 EPA: 1.3 ft2 (0.12 m2) 2.0 ft2 (0.19 m2) Height: 6-3/4 (17.1) 8-3/4 (22.3) Width: 18-1/2 (47.0) 21-1/2 (54.6) Depth: 11-3/4 (26.6) 14-3/4 (37.5) Max weight: 25 lbs (11.3 kg) 39 lbs (17.7 kg)

Notes1 Specify lamp type and distribu-

tion. See Configurations table.

2 Not available with SCWA


4 Not available with WFL2 SCWA.


6 Requires ED-28 reduced jacket lamp.


8 WFL2 only.


10 Optional multi-tap ballast (120V, 208V, 240V, 277V).

In Canada 120V, 277V, 347V; ships as 120V/347V.




14 Prefix with WFL and size (e.g., WFL2BBW).

15 WFL3 only. Maximum allow-able wattage lamp included.


17 Prefix with KFLWFL and size (e.g., KFLWFL2BVG).



LITHO

NIA

OU

TDO

OR


WALL M

OU

NTED

Specification


KL High pressure sodium

50S

70S

100S

Metal halide

70M

100M

Incandescent

I2

A Area

D Directional

120

2083

2403

277

347

TB4

23050HZ5



(blank) Stud wall mount BBS (std.)


BBF Pendant mount (flat surface)

BBR Recessed BBR (ceiling, soffit mount)


Ships installed







(blank) Dark bronze

DWH White

DBL Black


LPI Lamp included8

L/LP Less lamp

KLIntended Use

For use in site walls or as

stair lighting.

Construction

Housing: One-piece, cast-

aluminum housing (alloy con-

tains less than 0.2% copper)

with integral splice compart-

ment (46 cu. in.); four 3/4"

NPT conduit entries. Lens is

one-piece, injection-molded,

UV-stabilized polycarbonate,

.125" minimum thickness.

Tooled-in, stippled texture

on non-optical portions. Die-

cut, closed-cell EPDM gasket.

Housing is shipped separately

from lens/reflector/power

module. Stainless steel, cap-

tive, Philips-type fasteners

(tamper-resistant fasteners

also provided). Standard lens

finish is dark bronze enamel

(painted on both inside

and outside of non-optical

portion). Black, white and

natural aluminum finishes

also available. Housing finish

is clear polyester powder

for corrosion protection.

Recessed concrete cast in

place is standard; optional


Optics

Optics: Reflectors are

anodized, hydroformed

aluminum. Two distributions

available: A (for uniform

symmetrical area lighting)

and D (for left or right

directional-throw area

lighting, featuring a unique

bi-adjustable socket assem-

bly that can be field-adjusted

up or down to provide

maximum light distribution

on stairway plane).

Electrical

Electrical: All ballasts are

100% factory-tested. Electri-

cal components are unitized

on removable power module.

Positive-locking disconnect

on primary and secondary cir-

cuits. Medium-base porcelain


Listings




ORDERING INFORMATION For shortest lead times, configure products using bolded options. Example: KL 100M A TB LPI


12-1/4(31.1)

14-1/4(36.2)

6(15.2)

2-1/4(5.6)Max weight: 15 lbs (7 kg)


Notes1 For inverted mounting application, 70W max.

2 150W A21 max. in A distribution. 100W A21 max. in D distribution. 120V only.


4 Optional multi-tap ballast (120V, 208V, 240V, 277V). In Canada120V, 277V, 347V; ships as 120V/347V.



7 Must specify voltage. Only available with BBW, BBF. Not available in 347V or TB.

8 Not available with incandescent.

PRODUCT INFORMATION

LITH

ON

IA O

UTD

OO

R


WAL

L M

OU

NTE

DGeneral Purpose

TWFIntended Use



Construction



Die-cast doorframe has

impact-resistant, tempered,

glass lens, Doorframe is

fully sealed with a closed-cell

silicone gasket.

Finish: Standard finish is

textured dark bronze (DDBT)

polyester powder finish,

with additional architectural


www.lithonia.com/archcolors

Optics

Hydroformed reflector for su-

perior uniformity and control.

Vertical lamp orientation for

improved lamp output and life.

Electrical

Ballast: HID 70W-150W

utilizes a high reactance, high

power factor ballast. 175W-

400W utilizes a constant-


ballast. HEB maximum

wattage is 100M. Super CWA





option) for U.S. shipments

only. CSA, NOM or INTL

required for probe start

shipments outside the U.S..

Compact fluorescent uses an

electronic high-frequency

ballast.

Installation

A universal mounting plate

with integral mounting bolts

supports the fixture for easy,

one-person installation.

Listings

CSA listed to U.S. and

Canadian safety standards

suitable for wet locations in

the down orientation. NOM

Certified. IP65 rated. 175W

and below - listed to 40° C

ambient. CFL-2/42 and below

and 250W and above - listed

to 30° C ambient. Emergency

options in all wattages,

200W, and 70W and 57W CFL

- listed to 25° C ambient.

Series Lamp type Voltage Ballast Options

TWF11

TWF22


70S

100S

150S

200S

250S

400S

Metal halide

70M

100M

150M

175M

200M3

250M

320M3

350M3

400M


70MHC

100MHC

150MHC

Compact fluorescent

26DTT

2/26DTT

32TRT

2/32TRT

42TRT

2/42TRT

57TRT

70TRT

120

2085

2405

277

347

4805

TB6

MVOLT7


CWI Constant wattage isolated ballast8


HEB Electronic ballast9, 21

Ships installed



GMF Internal slow-blow fusing (not available with MVOLT; CFL only)

ELDW Bodine emergency battery pack10, 11

ELDWC Cold-weather emergency battery pack10, 12

ELDWR Fixture wired ready for Bodine B30 battery pack10, 13, 14

ELDWRPS Fixture wired ready for PS1400 or PSDL battery pack10, 14, 15




QRSTD QRS time delay10, 16

ELED LED emergency single10, 17, 18

2ELED LED emergency double10, 17, 18




2DC2012 Emergency circuit 12V; two 20W lamps included10, 19, 20

PE Photoelectric cell - button type (not available TB, MVOLT or 480V)16, 18

PER NEMA twist-lock receptacle only (no photocell)16, 22




2/1 Two 1-lamp ballasts23

DS Dual switching23

Shipped separately24

TWF1BBW Surface mounted back box

TWF1WG Wire guard

TWF1VG Vandal guard

TWF2BBW Surface mounted back box

TWF2VG Vandal guard

TWF2WG Wire guard

PE1 NEMA twist-lock PE (120, 208, 240V)






DWHG White-textured

DBLB Black-textured



LPI Lamp included

L/LP Less lamp

ORDERING INFORMATION Lead times will vary depending on options selected. Consult with your sales representative. Example: TWF1 100M TB LPI


Notes1 Available up to 150S, 200M, and 70TRT compact fluorescent.

2 Available in 250-400W HPS and MH.


4 Must be ordered with lamp included (LPI).

5 Consult factory for availability in Canada.

6 Optional multi-tap ballast (120, 208, 240, 277V; 120, 277, 347V in Canada--ships as 120/347 in Canada).

7 Optional multi-volt electronic ballast (for compact fluorescent only) capable of operating on any line voltage from 120V-277V.

8 Consult factory for availability.

9 SCWA: Not available with HPS and 70M or 100M; HEB: Only available with 70M or 100M.

10 Cannot be ordered with any other emergency option.

11 Available for compact fluorescent only; not available with 2/32TRT, 2/42TRT, 57TRT, or 70TRT.

12 Available for compact fluorescent only; not available with 57TRT or 70TRT.

13 Available for compact fluorescent only.

14 Pilot light/test switch mounting plate included.

15 Available for compact fluorescent only; not available with 2/42TRT, 57TRT, or 70TRT.

16 Must be ordered with fixture; cannot be field installed.

17 Maximum wattage 100M and 70S. Must specify 120V or 277V.

18 Must specify voltage.

19 Not available with SF, DF or GMF.

20 Consult factory for maximum HID wattage available with this option.

21 Available with the TWF1 only.

22 Available with the TWF2 only.

23 Available for compact fluorescent only; available with 2/26DTT, 2/32TRT, and 2/42TRT.


TWF1 TWF2 Depth: 9-5/8 (24.4) 12-3/8 (31.4)

Width: 16 (40.6) 18 (45.7)Height: 10-1/8 (25.7) 11-1/2 (29.2)

Max. weight: 24 lbs (10.8 kg) 39 lbs (17.6 kg)

DW

H



LITHO

NIA

OU

TDO

OR


General Purpose

TWHIntended Use

For outdoor storage areas,

warehouse and factory pe-

rimeters, and loading docks.

Not recommended for

applications with fre-

quent exposure to harsh

chemicals or commercial

cleaning fluids (e.g., car

washes). Installations in

such environments may

lead to premature failure

of the luminaire and void

the warranty.

Construction

Housing: Rugged, die-cast

aluminum housing.

Corrosion-resistant captive

external hardware includes

slotted hex-head fasteners.






Optics

Reflector is specular anod-

ized aluminum. Refractor

is prismatic borosilicate

glass. Lens is sealed and

gasketed to inhibit entrance

of outside contaminants.

Electrical






175W and above. MH:150W














High-frequency generator

for induction.








600V, 4KV pulse rated. Fluo-

rescent is four-pin positive

latching thermoplastic. LPI is


Installation

Back housing is separated

from front housing, eliminat-

ing ballast weight and pro-

moting easy handling. Top

3/4" threaded wiring access.

Back access through remov-

able 3/4" knockout. Mount

on any flat, non-combustible

vertical surface.

Listings

UL Listed (standard). CSA or

NOM Certified (see Options).


and wet locations. IP65 rated

(250W and below) or IP54

rated (400W).

Series Lamp type Voltage Ballast

TWH High pressure sodium1

70S

100S

150S

200S

250S

400S

Metal halide

70M1, 2

100M1

150M

175M3

200M4

250M

320M4, 5

350M4, 5

400M5


70MHC1, 2

100MHC1

150MHC


2/26DTT

2/26TRT

2/32TRT

2/42TRT

Induction1

70IL

100IL

Low pressure sodium1, 7

35L

Incandescent1, 8

300I

120

2089

2409

277

347

4809

TB10

MVOLT11

23050HZ12





Ships installed









FS Full shield

TP Tamperproof fasteners




Ships separately16

VG Vandal guard

WG Wire guard

(blank) Dark bronze

DWH White

DBL Black

DMB Medium bronze


DSS Sandstone



LPI Lamp included17

L/LP Less lamp

ORDERING INFORMATION For shortest lead times, configure products using bolded options. Example: TWH 250S TB LPI



2 Not available 480V.

3 Universal, mogul base lamp allows TWH to be available with SCWA.


5 Requires ED or BT 28 reduced jacket lamp.


7 Not available TB.

8 120V only, A21 lamp (not included).



11 Optional multi-volt electronic ballast (for compact fluorescent or induction wattages only) capable of operating on any line voltage from 120V-277V.



14 Must be ordered with fixture; cannot be field installed. Not available with 347, 480 or TB.


16 May be ordered as accessory. Prefix with fixture name (e.g., TWHWG).

17 Not available with incandescent.

Weight: 26-42 lbs (11.7-19 kg)

15-3/4(40.0)

16-1/4(41.3)

8(20.3)


LAMP/FIXTURE DATALAMP TYPE CIRCUIT LAMP SHAPE BASE

70S HX-HPF E17 Medium100S HX-HPF E17 Medium150S HX-HPF E17 Medium250S CWA BT28 Mogul400S CWA BT28 Mogul150M HX-HPF E17 Medium175M CWA BT28 Mogul250M CWA BT28 Mogul400M CWA ED or BT28 Mogul

WALL M

OU

NTED


LITH

ON

IA O

UTD

OO

R


WAL

L M

OU

NTE

DGeneral Purpose

TWP

Series Lamp type1 Voltage Ballast

TWP High pressure sodium

35S2

50S

70S

100S

150S

Metal halide

70M1, 3

100M1

150M

175M4


70MHC1, 3

100MHC1

150MHC

Low pressure sodium

35L3

Incandescent

200I6

Compact Fluorescent

26DTT

2/26DTT

26TRT

2/26TRT

32TRT

2/32TRT

42TRT

2/42TRT

120

2087

2407

277

347

4807

TB8

MVOLT9

23050HZ10





Ships installed




ELDWC Cold-weather emergency battery pack13





FS Full shield



INTL International shipment for 175M.

Ships separately16

WG Wire guard

(blank) Dark bronze

DWH White

DBL Black

DMB Medium bronze


DSS Sandstone



LPI Lamp included

L/LP Less lamp

Intended Use

For entrances, loading docks,

walkways and vehicle ramps.

Not recommended for

applications with fre-








the warranty.

Construction

Housing: Rear housing is

rugged, die-cast aluminum.

Corrosion-resistant, captive

external hardware includes

slotted hex-head and

tamperproof fasteners.

Finish is dark bronze (DDB)

corrosion-resistant polyes-

ter powder.

Optics

Reflector is aluminum, fin-

ished in white enamel. Front

housing and refractor are

one-piece, injection-molded,

UV-stabilized polycarbonate.

Standard finish: front cover

has an opaque lower portion

and dark bronze painted

upper portion; back housing

is dark bronze polyester. Re-

fractor is sealed and gasketed

to inhibit the entrance of

outside contaminants.

Electrical





wattage autotransformer for





start shipments outside the

U.S. for 175M. Not available

in 175M with SCWA. Compact



Socket: Glazed porcelain

medium based (mogul based

175W), horizontally oriented




600V for medium base;

1500W, 600V for mogul base.

4KV pulse rated. Fluorescent



35K for CFL.

Installation

Top 3/4" threaded wiring

access. Back access through

3/4" opening. For feed-thru

wiring, use condulet tee

(not included). Mount on

any flat, non-combustible

vertical surface.

Listings




and wet locations. IP65 rated.

ORDERING INFORMATION For shortest lead times, configure products using bolded options. Example: TWP 150M TB LPI


15-1/2 (39.4)

16-1/8 (41.0)

7-3/4 (19.7)

Weight: 17.9 lbs (8.1 kg)



2 120V only.




6 120V only. A21 lamp (not included).

7 Must specify CWI for use in Canada; n/a 35S or 50S.






13 Must specify voltage. -20°C to 55°C operation. Not available with DC or EC.


15 Not available with 347V, 480V, or TB.

16 May be ordered as accessory: TWPWG.


35S RHP E17 Medium50S RHP E17 Medium70S XHP E17 Medium

100S XHP E17 Medium150S XHP E17 Medium50M HX-HPF E17 Medium70M HX-HPF E17 Medium

100M HX-HPF E17 Medium150M HX-HPF E17 Medium175M CWA BT28 Mogul

35L HPF-LAG T17 Medium


LITHO

NIA

OU

TDO

OR


WALL M

OU

NTED

General Purpose

Series Lamp type Voltage Ballast

TWA High pressure sodium

35S1

50S2

70S2

100S2

Metal halide

50M

70M

100M


50MHC

70MHC

100MHC

Compact fluorescent

26DTT

26TRT

32TRT

42TRT

120

2084

2404

277

347

TB5

MVOLT6

23050HZ7



XHP High reactance (lag), high power factor


Ships installed









Ships separately

WG Wire guard11

(blank) Dark bronze

DWH White

DBL Black

DMB Medium bronze


DSS Sandstone



LPI Lamp included

L/LP Less lamp

TWAContour®

Intended Use

For entrances, stairwells,

corridors and other pedes-

trian areas.

Not recommended for applications with fre-quent exposure to harsh chemicals or commercial cleaning fluids (e.g. car washes). Installations in such environments may lead to premature failure of the luminaire and void the warranty.

Construction



Front cover is one-piece,

UV-resistant, injection-

molded polycarbonate,

internally painted. Captive

external hardware is treated

for corrosion resistance and

includes slotted hex-head

and tamper-proof fasten-

ers. Finish is dark bronze

(DDB) corrosion-resistant

polyester powder.

Optics

Front housing and

refractor are one-piece,

injection-molded, UV-

stabilized polycarbonate.

High-performance optical

system consists of specular

anodized segmented reflec-

tor and computer-designed

prism pattern. Standard

finish is dark bronze

polyester enamel. Front

cover sealed with one-piece,

high-temperature silicone

gasket to inhibit entrance of


Electrical

Components are mounted to

the cast-aluminum housing,

promoting maximum heat

dissipation. Ballast: All

ballasts are 100% factory

tested. MH: High reactance,

high power factor for 150W

and below. 150W and below


ignitor technology. HPS:

Reactor normal power

factor standard for 120V,

HPF available (XHP option).

Other voltages are high power

factor standard. Fluorescent

ballasts are electronic HPF (26

DTT and TRT).

Socket: HID is porcelain, hori-

zontally oriented, medium-



shell and center contact. (UL

Listed 660W, 600V and 4KV

pulse rated.) Fluorescent is

four-pin positive latching


35K for CFL.

Installation







vertical surface.

Listings



UL Listed for wet locations.

IP65 rated.

ORDERING INFORMATION For shortest lead times, configure products using bolded options. Example: TWA 100M 120 LPI



35S RNPF E17 Medium50S RNPF E17 Medium70S RNPF E17 Medium

100S RNPF E17 Medium50M HX-HPF E17 Medium70M HX-HPF E17 Medium

100M HX-HPF E17 Medium26DTT Electronic, HPF T4 GX32D-332TRT Electronic, HPF T4 GX24Q-342TRT Electronic, HPF T4 GX24Q-3

10 (25.4)

11-1/2(29.2)

9(22.7)

Max weight: 10 lbs (4.5 kg)


Notes1 120V, NPF only.

2 120V RNPF is standard; 208V, 240V, 277V, 347V, and TB are high-reactance power factor.




6 Optional multi-volt electronic ballast (compact fluorescent only) capable of operating on any line voltage from 120V-277V.




10 Must specify voltage. Not available in 347V or TB.

11 May be ordered as an accessory: TWAWG.

PRODUCT INFORMATION

LITH

ON

IA O

UTD

OO

R


WAL

L M

OU

NTE

DGeneral Purpose

Series Lamp type Voltage Ballast Options

TWAC High pressure sodium

35S1

50S2

70S2

100S2

Metal halide

50M

70M

100M

Compact fluorescent

26DTT

32TRT

42TRT

120

2083

2403

277

347

TB4

MVOLT5

23050HZ6



XHP High reactance (lag), high power factor7

Ships installed







DC12 Emergency circuit 12V; 35W lamp included10

2DC12 Emergency circuit 12V; two 35W lamps included10

DC2012 Emergency circuit 12V; 20W lamp included10

2DC2012 Emergency circuit 12V; two 20W lamps included10

PE Photo electric cell - button type11

CSA Meets Canadian safety standards


Ships separately12

WG Wire guard

(blank) Dark bronze

DWH White

DBL Black

DMB Medium bronze


DSS Sandstone



LPI Lamp included

L/LP Less lamp

TWACContour®

Intended Use

For entrances, stairwells, cor-

ridors and other pedestrian

areas. Not recommended

for applications with fre-








the warranty.

Construction



Front cover is one-piece,

UV-resistant, injection-

molded polycarbonate,

internally painted. Captive

external hardware is treated

for corrosion resistance and

includes slotted hex-head

and tamper-proof fasten-

ers. Finish is dark bronze

(DDB) corrosion-resistant

polyester powder.

Optics

Front housing and refractor

are one-piece, injection-

molded, UV stabilized

polycarbonate. One-piece,

die-formed reflector is

diffused aluminum. Refrac-

tor is clear polycarbon-

ate, providing IES cutoff

distribution and maximum

lateral light output. Stan-

dard finish is dark bronze

polyester enamel. Front

cover sealed with one-piece,

high temperature silicone

gasket to inhibit entrance of


Electrical

Components are mounted to

the cast-aluminum housing,


dissipation. Ballast: All


tested. MH: High reactance,

high power factor for 150W

and below. 150W and below


ignitor technology. HPS:

Reactor normal power

factor standard for 120V,

HPF available (XHP option).

Other voltage are high power

factor standard. Fluorescent

ballasts are electronic HPF

(26 DTT and TRT).

Socket: HID is porcelain, hori-

zontally oriented, medium-



shell and center contact. (UL

Listed 660W, 600V and 4KV

pulse rated.) Fluorescent is

four-pin positive latching


35K for CFL.

Installation







vertical surface.

Listings



UL Listed for wet locations.

IP65 rated.

ORDERING INFORMATION For shortest lead times, configure products using bolded options. Example: TWAC 100S 120 LPI



35S RNPF E17 Medium50S RNPF E17 Medium70S RNPF E17 Medium

100S RNPF E17 Medium50M HX-HPF E17 Medium70M HX-HPF E17 Medium

100M HX-HPF E17 Medium26DTT Electronic, HPF T4 GX32D-332TRT Electronic, HPF T4 GX24Q-342TRT Electronic, HPF T4 GX24Q-3


11-1/2(29.2)

9(22.7)

10(25.4)

Notes1 120V, NPF only.

2 120V RNPF is standard; 208/240/277/347V and TB are high reactance, high power factor.



5 Optional multi-volt electronic ballast (compact fluorescent only) capable of operating any line voltage from 120V-277V.


7 Only available with 120V.



10 HID only, n/a QRS, EC or NOM.

11 Must specify voltage. Not available 347 or TB.

12 May be ordered as an accessory: TWACWG


PRODUCT INFORMATION

LITHO

NIA

OU

TDO

OR


WALL M

OU

NTED

General Purpose

Series Lamp type1 Voltage Ballast Options Finish Lamped

TWR1

TWR2


70S

100S

150S

250S

400S

Metal halide

70M

100M

150M

250M2

400M2

Compact fluorescent

2/42TRT3

120

TB4

MVOLT5

120/3476





WG Wire guard9

(blank) Dark bronze LPI Lamp included

Intended Use

For mounting above entry-

ways and loading docks.

Contact with a direct

forceful spray of water

during operation can

result in glass breakage.

Not recommended for car

wash applications.

Construction


aluminum back housing and

hinged doorframe. Castings

are sealed with a one-piece

gasket to inhibit the entrance

of external contaminants.

Finish is bronze polyester

powder paint standard.

Optics

(TWR1, TWR2) Refractor is

prismatic borosilicate glass.

Reflector is die-formed anod-

ized stippled aluminum. TWR1

medium-base lamp and TWR2

mogul-base lamp included in

carton as standard.

Electrical

Ballast: All ballasts are

100% factory tested.

HPS: High reactance, high











order SCWA option). Compact




base socket for TWR1,

mogul-base socket for

TWR2, with copper alloy





35K for CFL.

Installation

Housing configured for

mounting directly over a

standard 4" outlet box or

for surface wiring via any

of three convenient 3/4"

threaded conduit entry hubs.

Listings

UL Listed standard to

U.S. and Canadian safety

standards. CSA Certified (see

Options). UL/C-UL Listed for

wet locations.

ORDERING INFORMATION For shortest lead times, configure products using bolded options. Example: TWR1 150S TB LPI


CONFIGURATIONSSERIES LAMP TYPETWR1 70S, 70M, 100S, 100M, 150S, 150M, 2/42TRTTWR2 250S, 250M, 400S, 400M

ACCESSORIESORDER SEPARATELY

TWR1WG WireguardTWR2WG WireguardRK1 TWR1FA Lens repair kitRK1 TWR2FA Lens repair kit


9(22.9)

7-3/8(18.8)

13(33.0)

Weight: 18 lbs (8.1 kg)

TWR1

9-1/4(23.5)

D17-7/8(45.4)

250W 400W Depth: 9-3/8 (23.8) 12-1/2 (31.8) Weight: 26 lbs (11.8 Kg) 31 lbs (14Kg)

TWR2

Notes1 Specify lamp type. See Configurations table.

2 Must be ordered with SCWA option.

3 Available with MVOLT or 120V with PE only.


5 Only available with 2/42TRT.

6 Only available with CSA.

7 Only available for 250M and 400M.

8 Available with 250M, 400M, 2/42TRT (120V) only. Consult factory for other wattage/voltage availability.

9 May be ordered as an accessory. Prefix with fixture name and size (e.g., TWR1WG).

TWR

TWR1

TWR2

PRODUCT INFORMATION

LITH

ON

IA O

UTD

OO

R


WAL

L M

OU

NTE

DGeneral Purpose

PRODUCT INFORMATION

Series Lamp type1 Voltage Ballast Options Lamped

TWR1C

TWR2C


70S

100S

150S

250S

400S

Metal halide

70M

100M

150M

250M2

400M2

120

TB3

120/3474



Ships installed



Ships separately

FCV Full cutoff visor7

WG Wire guard7

LPI Lamp included

Intended Use

For building- and wall- mount-

ed applications. Contact with

a direct forceful spray of

water during operation can



wash applications. Cannot

be inverted.

Construction



hinged doorframe. Castings are

sealed with a one-piece gasket


external contaminants. Finish

is bronze polyester powder

paint standard.

Optics

Tempered glass lens and

one-piece anodized aluminum

reflector provide IES cutoff

distribution. Optional full cut-

off visor available. Lens tilted

30° up horizontal.

Electrical


factory tested. HPS: High


for 150W and below. Constant







EISA legislation compliant, are


order SCWA option).


base socket for TWR1C,

mogul-base socket for TWR2C,

with copper alloy nickel-plated

screw shell and center contact.

Installation

Housing configured for mount-

ing directly over a standard 4"

outlet box or for surface wiring

via any of three convenient 3/4"

threaded conduit entry hubs

(tops and sides).

Listings

UL Listed to U.S. and Canadian

safety standards. CSA Certified

(see Options). UL/C-UL Listed

for wet locations.

ORDERING INFORMATION For shortest lead times, configure products using bolded options. Example: TWR1C 100M TB LPI


PRODUCT INFORMATION General Purpose

Series Lamp type Voltage Lamped

TWR1S High pressure sodium

150S

Metal halide

100M

TB1 LPI Lamp included

Intended Use



Contact with a direct

forceful spray of water

during operation can



wash applications.

Construction



hinged door frame. Castings

are sealed with a one-piece

gasket to inhibit the entrance

of external contaminants.

Finish is bronze polyester

powder paint standard.

Optics

Tempered glass lens and one-

piece anodized aluminum

reflector provide IES full

cutoff distribution. Medium-

base lamp included in carton

as standard.

Electrical

Quad-tap, high reactance,

high power factor is 100%

factory tested.

Installation





of three convenient 3/4"

threaded conduit entry hubs.

Listings

UL Listed to U.S and Canadian

safety standards. UL/C-UL

Listed for wet locations. Not

available in Canada.

ORDERING INFORMATION For shortest lead times, configure products using bolded options. Example: TWR1S 100M TB LPI


Notes1 Optional multi-tap ballast (120V, 208V, 240V, 277V).

CONFIGURATIONSSERIES LAMP TYPETWR1C 70S, 70M, 100S, 100M, 150S, 150MTWR2C 250S, 250M, 400S, 400M

DIMENSIONSDimensions are shown in inches (centimeters) unless otherwise noted.

TWR1C TWR2CHeight 10-1/4 (26.0) 14-1/2 (36.8)Width 13 (33.0) 17-7/8 (45.4)Depth 8-1/2 (21.6) 10 (25.4)Max. weight 18 lbs (8.1kg) 25 lbs (11.3kg)


TWR1CWG Size 1 wireguardTWR2CWG Size 2 wireguardRK1 TWR1CFA Size 1 lens repair kitRK1 TWR2CFA Size 2 lens repair kitTWRIC FCV Size 1 full cutoff visorTWR2C FCV Size 2 full cutoff visor

Notes1 Specify lamp type. See configurations table.



4 Only available with CSA.

5 Only available for 250M and 400M.

6 Available with 250M, 400M, 400S (120V) only. Consult factory for other wattage/voltage availability.

7 May be ordered as an accessory. Prefix with fixture name and size (e.g., TWR1CWG or TWR1C FCV).

DIMENSIONSDimensions are shown in inches (centimeters) unless otherwise noted.

Height 16-1/2 (41.9)Width 12-1/4 (31.2)Depth 10-3/4 (27.3)Max. weight 15.5 lbs (7.0kg)

TWRC

TWRS

PRODUCT INFORMATION

LITHO

NIA

OU

TDO

OR


WALL M

OU

NTED

General Purpose

Series Lamp type Voltage Options Finish Lamped5 Packaging

TWS High pressure sodium

35S

50S

70S

Metal halide

50M

Compact fluorescent

13TT

26TRT1

32TRT1

42TRT1

120

MVOLT2

Ships installed


Ships separately

WG Wire guard4

(blank) Dark bronze

DWH White

LPI Lamp included

L/LP Less lamp

M6

TWSIntended Use

For entrances, stairwells,

corridors and other pedes-

trian areas.

Construction

Housing: Cast aluminum

backplate on which electrical

components are mounted for

maximum heat dissipation.

Gasketing between backplate

and front cover prevents entry

of water and comtaminants.

External hardware includes

Phillips head and tamperproof

hex-head fasteners. Finish is

dark bronze.

Optics

Front cover/refractor is

injection-molded, one-

piece, UV stabilized polycar-

bonate. The optical system

is sealed and gasketed



Electrical

35-70W HPS and 50W MH

use a 120V normal power

factor ballast, and lamp is

included as standard. The

13W compact fluorescent

uses a 120V electro-magnetic

ballast and includes a twin-

tube fluorescent lamp as

standard. The 26-42W

compact fluorescent uses a

multi-volt electronic ballast.

Options include 120-277V

operation and 26W, 32W or

42W triple-tube fluorescent

lamp (not included).

Socket: HID: Medium-base

porcelain socket, vertically

oriented with copper alloy


center contact. (UL Listed

660W, 600V). CFL: The 26-42W

fluorescent uses a universal

4-pin socket for 26W, 32W or

42W operation based on lamp

choice. The 13W fluorescent

uses a 2-pin socket.

Installation

Units for wall mounting

include two 3/4" knockouts

for routing electrical conduit

back and bottom.

Listings

UL Listed to U.S. and Canadi-

an safety standards. UL/C-UL


ORDERING INFORMATION For shortest lead times, configure products using bolded options. Example: TWS 50M 120 PE LPI



RK1 PEB1 Photocell kit, (120V only)TWSWG Wireguard

11(27.9)

6-7/8(17.4)

Weight: 4.9 lbs (2.2 kg)

5-1/4(13.3)


Notes1 Ships as 26/42TRT. Operates 26-42W as standard base on lamp choice.

Lamp not included.

2 Not available with MH, HPS or 13TT.

3 Not available with MVOLT.

4 May be ordered as an accessory: TWSWG.

5 LPI standard for HID or 13TT; L/LP standard for 26-42TRT.

PRODUCT INFORMATION

LITH

ON

IA O

UTD

OO

R


WAL

L M

OU

NTE

DContractor Select Stock

BUILDING MOUNTED

Intended Use

Building-mounted light for

entrances, stairwells, corridors

and other pedestrian areas.

Construction

W: Cast aluminum backplate

with polycarbonate cover.

WC: Rugged, corrosion-resis-

tant, die-cast aluminum back

housing and hinged door

frame. Dark bronze finish.

Optics

Anodized aluminum reflector.

Electrical

Ballast: W: 120V normal power

factor. WC: Quad tap, high

reactance, high power factor.

Medium-base lamp included.

Installation





of the convenient conduit

entry hubs (W: Two 3/4"

unthreaded knockouts, one

each on bottom and back.

WC: Four threaded 1/2"

plugs, one each side, top,

and bottom.)

Listings




standards. 25°C maximum

ambient temperature. Fix-

tures are covered by Lithonia

Lighting 12-month warranty


in manufacture.


CATALOG NUMBER DESCRIPTION WATTAGE LAMP VOLTAGE FINISHLAMP

INCLUDEDPHOTOCELL INCLUDED

APPROXIMATE WEIGHT (LBS)


W70SPL 120 M6 Non-cutoff 70 HPS 120 Dark bronze Y Y 5 6WC100ML M4 Cutoff 100 MH 120/208/240/277 Dark bronze Y N 10 4

TWR1 150M TB LPI Non-cutoff 150 MH 120/208/240/277 Dark bronze Y -- 18 1TWR1C 150M TB LPI Cutoff 150 MH 120/208/240/277 Dark bronze Y -- 18 1

TWR2 250M TB SCWA LPI Non-cutoff 250 MH 120/208/240/277 Dark bronze Y -- 26 1TWR2C 250M TB SCWA LPI Cutoff 250 MH 120/208/240/277 Dark bronze Y -- 21 1TWR2 400M TB SCWA LPI Non-cutoff 400 MH 120/208/240/277 Dark bronze Y -- 31 1

TWR2C 400M TB SCWA LPI Cutoff 400 MH 120/208/240/277 Dark bronze Y -- 25 1

11(27.9)

6-7/8(17.4)

5-1/4(13.3)


W70SPL

8-5/8(21.9)

11-7/8(30.2)

8-3/8(21.3)

WC100ML

9(22.9)

7-3/8(18.8)

13(33.0)

TWR1

13(33.0)

10-1/4(26.0)

9-1/2(24.1)

TWR1C

9-1/4(23.5)

D17-7/8(45.4)

250W 400W Depth: 9-3/8 (23.8) 12-1/2 (31.8) Weight: 26 lbs (11.8 Kg) 31 lbs (14Kg)

TWR2

14-1/2(36.8)

17-7/8(45.4)

10(25.4)

TWR2C


PRODUCT INFORMATION

LITHO

NIA

OU

TDO

OR


WALL M

OU

NTED

Contractor Select Stock

VAPOR TIGHTS & CEILING MOUNT

UTILITY

Intended Use

Utility wall-, ceiling-, or

pendant-mounted fixtures for

general-purpose applications.

Incandescent, fluorescent,

metal halide, or high pressure

sodium sources.

Construction

Vapor tights: Rugged,

die-cast aluminum housing.

Gray finish.

VRC: Rugged, die-cast

aluminum housing. Dark

bronze finish.

Optics

Vapor tights: Prismatic globe

for even distribution.

VRC: Clear prismatic polycar-

bonate lens.

Electrical

Junction box included on

vapor tights. Ballast: 120V for

vapor tights; 120/277 for VRC.

Installation

Designed for easy installation

and maintenance.

Vapor tights: 3/4" threaded

knockouts allow for side or

top conduit entry.

VRC: Three threaded 1/2" NPS

plugs allow for conduit entry,

or housing may be mounted

over the outlet box.

Listings

Listed and labeled to UL stan-

dards for wet locations. Listed

and labeled to CSA standards.

Fixtures are covered by

Lithonia Lighting 12-month

warranty against mechanical

defects in manufacture.


CATALOG NUMBER DESCRIPTION WATTAGE LAMP VOLTAGELAMP

INCLUDEDAPPROX.

WEIGHT (LBS)STANDARD CARTON

QUANTITYVC150I M12 Vapor tight ceiling mount 150 Incandescent 120 N 2 12VP150I M12 Vapor tight pendant mount 150 Incandescent 120 N 2 12VW150I M12 Vapor tight wall mount 150 Incandescent 120 N 2 12

VC300I M6 Vapor tight ceiling mount 300 Incandescent 120 N 2 6VP300I M6 Vapor tight pendant mount 300 Incandescent 120 N 2 6VW300I M6 Vapor tight wall mount 300 Incandescent 120 N 2 6VC42L M6 Vapor tight ceiling mount 42 Fluorescent 120 Y 6 6VP42L M6 Vapor tight pendant mount 42 Fluorescent 120 Y 6 6VW42L M6 Vapor tight wall mount 42 Fluorescent 120 Y 6 6

VC100ML M6 Vapor tight ceiling mount 100 MH 120 Y 9 6VP100ML M6 Vapor tight pendant mount 100 NH 120 Y 8 6VW100ML M6 Vapor tight wall mount 100 MH 120 Y 10 6VC150SL M6 Vapor tight ceiling mount 150 HPS 120 Y 9 6VP150SL M6 Vapor tight pendant mount 150 HPS 120 Y 8 6VW150SL M6 Vapor tight wall mount 150 HPS 120 Y 10 6

VRC70ML 120/277 M6 Ceiling mount 70 MH 120/277 Y 9 6VRC70SL 120/277 M6 Ceiling mount 70 HPS 120/277 Y 9 6

W

H

VC150SL VC150I VC300I VC100ML Height: 9 (22.9) 11-3/8 (28.9) 14-7/8 (37.8) Width: 4-1/2 (11.4) 5-3/4 (14.6) 7 (17.8)

VC42L


W

H

VW150SL VW150I VW300I VW100ML

Height: 10 (25.4) 11-7/8 (30.2) 15-1/2 (39.4)Width: 7-1/4 (18.4) 8-3/4 (22.2) 8-3/4 (22.2)

VW42L


9(22.9)

9(22.9)

7-1/2(19.1)

VRC70

PRODUCT INFORMATION

LITH

ON

IA O

UTD

OO

R


WAL

L M

OU

NTE

DContractor Select Stock

ENTRY LIGHTSIntended Use

For entrances in motels,

condominiums and other

pedestrian areas.

Construction

Die-cast aluminum housing

with electrostatically applied

dark bronze polyester powder

finish. White finish available.

Optics

Both white polycarbonate

globe and cylinder-shaped lens

are included with each fixture.

Electrical

Ballast: 120V.

Socket: Medium-base

porcelain socket, vertically

oriented with copper alloy,



2-pin socket.

Installation

Building-mounted over

junction box.

Listings









CATALOG NUMBER DESCRIPTION WATTAGE VOLTAGE FINISHLAMP

INCLUDEDAPPROXIMATE WEIGHT (LBS)


JJ100I M6 Incandescent entry light 100 120 Dark bronze N 3 6JJ100IW M6 Incandescent entry light 100 120 White N 3 6

JJ13L 120 M6 Fluorescent entry light 13 120 Dark bronze Y 3 6JJ13IW 120 M6 Fluorescent entry light 13 120 White Y 3 6JJ50SL 120 M6 HPS entry light 50 120 Dark bronze Y 4 6

JJ50SLW 120 M6 HPS entry light 50 120 White Y 4 6

7-1/4(18.4)

6-3/8(16.2)

4-3/8(11.1)

6(15.2)


6-3/8(16.2)

6-1/8(15.6)

4-3/8(11.1)

7-3/8(18.7)


PRODUCT INFORMATION

LITHO

NIA

OU

TDO

OR


PAR

KIN

G G

AR

AGE &

CAN

OP

YSpecification

Series Lamp type Voltage Ballast Mounting Options

PGR High pressure sodium1

70S

100S

150S

Metal halide

50M1, 2

70M1, 2

100M1

150M

175M

200M3


50MHC1, 2

70MHC1, 2

100MHC1

150MHC

Electronic metal halide1, 2, 5

50M

70M

Compact fluorescent

2/42TRT

2/57TRT

2/70TRT

85TRT

Induction6

85IL

85IL/40

120

2087, 8

2407, 8

2778

3478

4807, 8, 9, 10

TB10,11

23050HZ12

MVOLT13

TVOLT14




HEB Electronic metal halide

Ships separately15

YK Yoke

OJB Offset junction box

OJBHK Offset junction box (for use with HEB, CFL, IL)

Ships installed






QRSTD QRS time delay16, 17




TP Tamperproof

HS House-side shield19, 20

HSR House-side glare shield ready19, 20

HA High ambient (40°C)20, 21, 22

FLR Frosted lower lens

DN Downlight focused8, 10, 19, 21

PC Polycarbonate refractor/lower housing/lens




Ships separately15

BDS Bird deterrent shroud

(blank) White (std.)

DDB Dark bronze

DBL Black

DGC Charcoal gray




LPI Lamp included

L/LP Less lamp

LP Lamp factory installed

PGRIntended Use

For parking garage applications.

Construction

Upper housing: Rugged,

die-cast aluminum with

one-piece silicone gasketing.

Standard finish is white,


powder paint. Other archi-

tectural colors available as

listed below.

Lower Assembly: Precision

injection-molded, UV stabilized

acrylic. Hinged and secured

with four stainless steel screws.

Polycarbonate available.

Optics

Lower semi-specular,

faceted, vacuum metalized

aluminum reflector and

upper-precision, injection-

molded, prismatic acrylic

refractor. Polycarbonate

refractor available.

Electrical

















outside the U.S. Electronic

MH: 180°C Class H insulation

system. Ballast is high

power factor, <15% THD with

starting temperature of -22°F

(-30°C). Compact Fluorescent:

Ballast is Class P, electronic,

high power factor, <10% THD

with starting temperature of

0°F (-18°C). Induction: High-

Frequency Generator - Sup-

plies high-frequency power

to the discharge vessel (lamp)

to initiate and maintain a gas

discharge for a rated 100,000

hours of life (optimized for

ambient temperatures rang-

ing from -40° to 25°C; higher

ambient temperatures may

reduce lamp life). Power Cou-

pler - Induction coil transfers

energy from the generator

to the discharge vessel.

Discharge Vessel - Glass bulb

contains a mixture of low-

pressure mercury vapor and

inert buffer gas. The wall of

the discharge vessel is coated

with a fluorescent powder

which produces light at

3000K color and 80+ CRI.

Socket: Medium-base,

UL Listed 660W, 600V, 4K

socket. CFL sockets are high

temperature thermoplastic

with integral retention clip.


Installation

Mounting: Fully silicone-

gasketed, galvanized steel

plate. Surface mounts to

recessed box or pendant

mounts to industry standard

J-boxes. The quick-mounting

bracket doubles as a hanger

for the fixture, allowing

for trouble-free electrical

connections. The fixture

twist-locks into place in a

firm, secure fashion.

Listings




25°C ambient operation and

wet locations. U.S. Patent

No. D402,075. Canadian

patent No. 86779.

ORDERING INFORMATION For shortest lead times, configure products using bolded options. Example: PGR 100M TB LPI



15(38.1)

11-3/4(29.8)





5 Must be ordered with HEB option. (For ceramic lamp, order as 50MHC or 70MHC).

6 Must be ordered with LP option. Optimized for use in areas where ambient temperature does not exceed 20°C. Higher ambient temperatures may reduce lamp life.


8 Not available with induction.

9 Available in 150S, 175M and 200M only.

10 Not available with compact fluorescent.



13 Optional multi-volt electronic ballast capable of operating on any line voltage from 120V-277V. Use for both compact fluorescent and electronic HID.

14 Optional tri-volt electronic ballast capable of operating on any line voltage from 200V-277V. Available with induction only.

15 May be ordered as an accessory. Must specify finish. Prefix with fixture name and size (e.g. PGRYK U).


17 Not available with KiloWatch.

18 Available with 175M, 200M and 150S only.

19 Not available with HA (high ambient) option.

20 Not available with DN (downlight focused) option.

21 Not available with HS (house-side glare shield).

22 Not available with 200M.


PRODUCT INFORMATION

LITH

ON

IA O

UTD

OO

R


PAR

KIN

G G

AR

AGE

& C

AN

OP

Y Specification

TGL TGRAcrylume®

Intended Use

For areas that require

optimum vertical illumina-

tion with glare control at

low mounting heights. Ideal

for parking garages, green-

houses, garden centers and

low-profile industrial aisles.

Certain airborne contami-

nants can diminish integrity

of acrylic. Refer to Acrylic

Environmental Compatibil-

ity tables on pages 794-795

for suitable uses.

Construction

Housing: Rugged, heavy, die-

cast aluminum housing. Stan-

dard finish is natural aluminum


Induction lighting: High-

frequency generator/ballast

supplies high-frequency cur-

rent to the lamp to initiate and

maintain a gas discharge for a

rated 100,000 hours of life.

Optics

One-piece, injection-molded,

100% virgin acrylic refractor.

TGL Type V (A165), Type II (A162),

TGR Type V (A125) and Type 1

(A121) distributions are avail-

able. Polycarbonate refractor

available. Consult factory.

Electrical


factory tested. HPS: Constant

wattage autotransformer.

MH: 175-200W fixtures

shipped within the U.S.

require super CWA pulse

start ballasts which are 88%

efficient and EISA-legislation

compliant (must specify

SCWA option). CSA, NOM

or INTL options required


outside the U.S.

Socket: Vertically oriented

mogul base protected exclu-

sionary "PINK" socket with


screw shell and center contact.

For use with O-rated, protected

metal halide lamps only.

Installation

Standard quick-mount

attachment plate mounts

to 4" square or octagonal

J-box. Factory installed

pendant mount option

(PM) available.

Listings

TGL: UL Listed to U.S. and

Canadian safety standards.

NOM Certified. TGR: UL

Listed and CSA Certified. NOM

Certified. UL Listed for damp

locations. Ambient operation:

-30°C to 40°C (100M); -30°C

to 25°C (250M); -40°C to

25°C (85IL). UL wet location

standard for 150W metal

halide TGL / TGR. Optional for

all other wattages.

Series Lamp type6 Reflector Voltage Ballast Options

TGL

TGR

Protected metal halide

100MP

150MP

200MP


70S

100S

150S

Induction

55IL

85IL

A165

A162

A125

A121

TB4

120

2081,2,3

2401,2

277

347

480

TVOLT7

Pulse start metal halide

For shipments to U.S. territories, SCWA must be specified to comply with EISA.

SCWA Super constant wattage autotransformer

RLB Regulated Lag ballast

Non-EISA ballast

(blank) Standard magnetic ballast5

CWA Constant wattage5

CWI Constant wattage isolated 5

MRB Magnetic regular ballast

For options and accessories, see page 439.

ORDERING INFORMATION For shortest lead times, configure products using bolded options. Example: TGL 200MP A165 TB SCWA


SERIESREFLECTOR

LAMP TYPETYPE V TYPE II

TGL A165 A162 100MP, 150MP, 200MP, 70S, 100S, 150S, 55IL, 85ILTGR A125 A121 100MP, 70S, 100S, 150STGL A165 A162 55IL, 85IL

16-3/4(42.5)

15-1/2(39.4)

Pendant mount

13(34.0)

Surface mount

13-3/8(34.0)

Pendant mount

12-1/2(31.8)

11-1/4(28.6)

Surface mount

TGR

Notes1 Requires CWI or RLB option in Canada for metal halide. Available

for 175-250W only.

2 Requires CWI or MRB option in Canada for high pressure sodium. Available for 70-150W only.

3 220V and 240V, 50Hz and 60Hz ballasts available for use with U.S. protected metal halide lamps.

4 Optional multi-tap ballast (120V, 208V, 240V, 277V; 120V, 277V, 347V in Canada).

5 Available for shipments outside of U.S. only. 150, 200W metal halide only.

6 Specify lamp type and reflector, see configurations table.

7 55IL and 85IL only.


TGL

PRODUCT INFORMATION

LITHO

NIA

OU

TDO

OR


PAR

KIN

G G

AR

AGE &

CAN

OP

YSpecification


KPS High pressure sodium1

50S

70S

100S

150S

Metal halide

100M1

150M

175M


100MHC1

150MHC

R2 Type II roadway


R4 Type IV, FT

R5 Type V symmetric

120

2083

2403

277

347

4803

TB4

23050HZ5




Ships installed

(blank) Ceiling mount (std.)

RMG Recessed mount 2"x2" (grid ceiling)6

Ships separately

YK Yoke7, 8, 9


Ships installed







MOG Mogul base socket12

WL Wet location7

SS Stainless steel housing6




Ships separately

VG Vandal guard8


DBL Black

DGC Charcoal gray

DMB Medium bronze


DWH White



LPI Lamp included

L/LP Less lamp

KPSIntended Use

For parking garage applications.

Construction


gauge aluminum housing.

Square shape, continuous

welded seams for weather-

tight integrity.

Door Assembly: Extruded-

aluminum doorframe has an


glass lens. Doorframe is

sealed to housing by EPDM

closed-cell gasket.

Finish: Dark bronze (DDB)






Stainless steel housing also

available.

Optics

Reflectors are anodized,

hydroformed aluminum.

Four cutoff distributions

available: Type II (roadway),


IV (forward throw) and

Type V (symmetric). Type V

reflector is vertically lamped;

all others horizontally

lamped. Reflectors are field-

interchangeable and hinge

out for easy removal during

installation/maintenance.

Electrical










start shipments outside

the U.S. for 175M. Electrical

components are unitized on

removable power module.


disconnect on primary and

secondary circuits.

Socket: Medium-base

porcelain socket standard.

Mogul-base porcelain socket

for 175W metal halide. 4KV

pulse rated.

Installation

Direct mounting to recessed

J-box is standard; yoke or

recessed mountings optional.

Housing will accommodate

both top and side branch-

circuit wiring and has internal

splice compartment.

Listings




damp locations. SS option:


and damp location. RMG

option: UL Listed for recessed

mounting, wet locations and

covered ceilings only.

ORDERING INFORMATION For shortest lead times, configure products using bolded options. Example: KPS 100M R3 TB LPI


16-3/4(42.6)

10-1/2 (26.7)

Max. weight: 36 lbs (16 kg)







6 SS and RMG cannot be ordered together.

7 Not available with RMG.

8 May be ordered as an accessory. Prefix with fixture name (e.g., KPSYK U).



11 Available with 175M SCWA only.

12 Not available with metal halide.

PRODUCT INFORMATION

LITH

ON

IA O

UTD

OO

R


SpecificationPA

RK

ING

GA

RAG

E &

CA

NO

PY

KACMIntended Use

For parking garages,

convenience stores, hotels

and walkways.

For covered ceiling, mount on

concrete, steel or aluminum.

Not for use in dwellings.

Construction




thickness. Die-cast aluminum

doorframe has prismatic,


glass; drop dish acrylic lens or

drop dish polycarbonate lens.

Doorframe is fully gasketed

with one-piece tubular sili-

cone. Surface mounted utiliz-

ing four 0.5" mounting holes

and one 0.875" wire-entry

hole (mounting hardware not

included). Dark bronze (DDB)


powder finish is standard.




Optics

Reflector is optical-quality

aluminum that works in

tandem with a light-diffusing

prismatic lens.

Electrical

















outside the U.S. Induction:

High-Frequency Generator

- Supplies high-frequency

power to the discharge

vessel (lamp) to initiate and

maintain a gas discharge

for a rated 100,000 hours of

life (optimized for ambient

temperatures ranging from

-40° to 25°C; higher ambient

temperatures may reduce

lamp life).



Position-oriented socket stan-

dard on all metal halide units.

Listings




wet locations. UL Listed for

25°C ambient temperature.


KACM High pressure sodium1

150S

250S

400S

Metal halide

100M1

150M

175M2

200M3

250M

320M3

400M


100MHC1

150MHC

Induction

165IL5

FP Flat C73T6

DPA Drop acrylic

DPP Drop polycarbonate

120

2087

2407

277

347

4807

TB8

23050HZ9

TVOLT10




Ships installed

(blank) Ceiling mount (std.)

TC Thru-wire condulet tee

Ships separately11

YK Yoke12, 13


Ships installed








Ships separately11

VG Vandal guard15

WG Wire guard16


DBL Black

DGC Charcoal gray

DMB Medium bronze


DWH White



LPI Lamp included

L/LP Less lamp

LP Lamp factory installed

ORDERING INFORMATION For shortest lead times, configure products using bolded options. Example: KACM 400M DPA TB SCWA LPI


17-1/2(44.5)

7-1/8(18.1)



Flat Lens

17-1/2(44.5)


11-1/8(28.3)

Drop Lens


2 Universal mogul base lamp allows KACM to be available with SCWA.



5 Must be ordered with LP option.

6 Not available with 165IL.




10 Induction only.


12 Order accessory as KACMYK.



15 FP lens only. Order accessory as KACVG.

16 Order accessory as KACWG.

PRODUCT INFORMATION

LITHO

NIA

OU

TDO

OR


FLOO

DLIG

HTIN

GArchitectural


ASF1

ASF2


50S

70S

100S

150S

200S

250S

400S3

Metal halide

50M2, 4

70M2, 4

100M2

150M

175M5

200M6

250M

320M6

350M6, 7

400M7


50MHC2, 4

70MHC2, 4

100MHC2

150MHC

Compact fluorescent2, 9

26DTT

2/26DTT

32TRT

2/32TRT

42 TRT

2/42TRT

57TRT

70TRT

NSP Narrow spot

SP Spot

HSP Horizontal spot

MDF Medium flood

WDF Wide flood

VFW Vertical flood-wide

VFN Vertical flood- narrow

120

20810

24010

277

347

48010

TB11

MVOLT12

23050HZ13




Ships installed

(blank) ASF1 3/4" threaded knuckle (std.)

(blank) ASF2 swivel (std.)

YK Yoke mount


AFTM Tenon base mount

AFSTM Stanchion mount

AFWMA Wall-mount arm

AFTMB Twin mounting bar

AFTS Architectural tenon slipfitter for 3/4" THK option

AFSTMTHK Stanchion mount for 3/4" THK option

AFWMATHK Wall-mount arm for 3/4" THK option

AFWMPTHK Wall-mount plate for 3/4" THK option

AFTMBTHK Twin mounting bar for 3/4" THK option

AFJB Architectural J-box for 3/4" THK option


Ships installed






QRSTD Quartz restrike time delay16

PE Photoelectric cell, button type17

2/1 Two 1-lamp ballasts18





FV/BVG Full visor and vandal guard15

VG Vandal guard

BD Barn door15

FV Full visor15


GS Glare shield (upper or bottom visor)15

(blank) Textured dark bronze



DWHG Textured white

DBLB Textured black

DDB Dark bronze

LPI Lamp included

L/LP Less lamp

ASFAeris™

Intended Use

For landscape and facade

lighting.

Construction


piece low copper alloy alumi-

num housing.

Door Assembly: Die-cast door-

frame has impact-resistant,

tempered glass lens. Door

frame is fully sealed with a

closed cell silicone gasket.

Finish: Standard finish is

textured dark bronze polyester

powder. Additional archi-

tectural colors available; see

www.lithonia.com/archcolors

for more information.

Optics

Anodized aluminum reflec-

tors; segmented, specular or

hammertone finish. Reflec-

tors are interchangeable and

allow for tool-less access to

electrical components.

Electrical





















base socket for ASF1, mogul-

base socket for ASF2, with



tact (UL Listed 660W, 600V,

4KV pulse rated). Fluorescent


thermoplastic. UL listed. LPI


Installation

ASF1 standard mounting is

cast 3/4" threaded knuckle.

ASF2 standard mounting is

heavy-duty, cast-aluminum

swivel that fits over standard

1-1/2" (1.9" O.D.) to 2" (2.38"

O.D.). Optional yoke mount-

ing available in both sizes.

Listings

UL Listed suitable for wet

locations in all orientations

and 25°C ambient. UL Listed

to U.S. and Canadian safety

standards. NOM Certified

(see Options). IP66 rated.

Patents pending.

ORDERING INFORMATION For shortest lead times, configure products using bolded options. Example: ASF1 100M WDF 120 LPI



ASF150S, 50M, 50MHC, 70S, 70M,

70MHC, 100S, 100M, 100MHC, 150S, 150M, 150MHC, 175M

NSP, SP, HSP, MDF, WDF, VFW, VFN

ASF1

26DTT, 2/26DTT, 26TRT, 2/26TRT, 32TRT, 2/32TRT,

42TRT, 2/42TRT, 57TRT, 2/57TRT, 70TRT

WDF

ASF2175M, 200S, 200M, 250S, 250M, 320M, 350M, 400M

NSP, SP, HSP, MDF, WDF, VFW, VFN

ASF2 400S HSP, MDF, WDF, VFW, VFN


DISTRIBUTIONCIRCUIT TYPE

LAMP SHAPE

BASE TYPE

NEMA DIST.

150S HSP HX-HPF E17 Medium 5 x 3150S WDF HX-HPF E17 Medium 7 x 6400S HSP CWA ET18 Mogul 7 x 3400S WDF CWA ET18 Mogul 7 x 6175M NSP CWA E17 Medium 1 x 2175M HSP CWA E17 Medium 5 x 3175M WDF CWA E17 Medium 7 x 6400M NSP CWA ED28 Mogul 1 x 3400M HSP CWA ED28 Mogul 7 x 5400M WDF CWA ED28 Mogul 7 x 6

57TRT WDFElectronic,

HPFT4 GX24Q-5 7 x 6

70TRT WDFElectronic,

HPFT4 GX24Q-6 7 x 6

ASF1 ASF2 EPA: 1.2 ft2 (0.11m2) 2.0 ft2 (0.19m2)

Depth: 7-5/8 (19.3) 11 (27.9)Width: 15-1/2 (39.4) 21-1/2 (54.6)Height: 10-7/8 (27.6) 18-1/2 (47.0)

Max. weight: 20 lbs (9.0 kg) 35 lbs (15.8 kg)

DW

H




3 Not available with NSP or SP distributions.

4 Not available with 480V

5 Not available ASF1 SCWA.


7 ED-28 reduced jacket lamp required.



9 Available with ASF1 WDF distribution only.



12 Optional multi-volt electronic ballast (for compact fluorescent lamps only) capable of operating on any line voltage from 120V-277V.

13 Consult factory for available wattages



16 ASF2 only. EC, QRS, and QRSTD options cannot be ordered together. Maximum allowable wattage lamp included.

17 Must be ordered with fixture; cannot be field installed. Not available in 347V, 480V, or TB.

18 ASF1 with CFL only. Not available with PE.

19 Prefix with fixture name and size (e.g., ASF2FV).

PRODUCT INFORMATION

LITH

ON

IA O

UTD

OO

R


ArchitecturalFL

OO

DLI

GH

TIN

G


KFL2

KFL3


70S

100S

150S

250S

400S

Metal halide

70M2, 3

100M2

150M

175M4

200M5

250M

320M5

350M5, 6

400M6


70MHC2, 3

100MHC2

150MHC

SP Spot

BP Bi-peak symmetric

FT Forward throw

HPM Medium asymmetric

HPN Narrow asymmetric

HPW Wide asymmetric

RN Narrow symmetric

RW Wide symmetric

120

2088

2408

277

347

4808

TB9

23050HZ10




Ships installed

(blank) Swivel slipfitter (std.)

YK Yoke mount

THK Threaded knuckle mount


AFTM Tenon base mount13

AFSTM Stanchion mount13

AFWMA Wall-mount arm13

AFTMB Twin mounting bar13

AJB Architectural J-box for 1/2" THK option14

KFLSTMTHK Stanchion mount for 1/2" THK option14

KFLTMBTHK Twin mounting bar for 1/2" THK option14

KFLWMATHK Wall mount for 1/2" THK option14

TS Tenon slipfitter (2-3/8" OD max.)15


Ships installed










UV/BVG Upper visor and bubble vandal guard12

WG Wire guard

BVG Bubble vandal guard

BD Barn door12

FV Full visor12

UV Upper visor12

BV Bottom visor12


HLV Horizontal louver12

VLV Vertical louver12

(blank) Dark bronze

DBL Black

DGC Charcoal gray

DMB Medium bronze


DWH White



LPI Lamp included

L/LP Less lamp

KFLIntended Use

For landscape and facade

lighting.

Construction

Housing: Extruded

aluminum body with cast

end caps. Cast aluminum

doorframe is hinged and

secured by stainless steel

fasteners. Closed-cell

silicone gasket prevents

entrance of contaminants.

Clear, impact-resistant,

tempered glass lens with

silk screen.






Optics

Anodized aluminum

reflectors; segmented,

specular or hammertone

finish. Reflectors are field

interchangeable.

Electrical

Ballasts: All ballasts are 100%
















outside the U.S.

Socket: Horizontal porcelain

socket (KFL2 medium base,

KFL3 mogul base) with copper

alloy, nickel-plated screw shell


660W, 600V 4KV pulse rated.

Installation

Standard mount is two-piece,

heavy-duty, cast-aluminum

swivel with integral wiring

compartment (pictured).

Swivel fits over standard

1-1/2" (1.9" OD) to 2" (2.38"

OD) tenon. Corrosion-

resistant painted steel yoke

with 3-foot, 16/3 SEO cable

or threaded knuckle mount

(1/2" NPT) are optional.

Listings



Options). UL Listed for 25°C


IP66 rated.

ORDERING INFORMATION For shortest lead times, configure products using bolded options. Example: KFL2 100M HPW 120 LPI


Notes1 Specify lamp type. See




4 Not available KFL2 SCWA.


6 ED-28 reduced jacket lamp required.





11 May be ordered as an acces-sory.


13 For use with swivel mounting only. Must include swivel mount option on fixture.

14 For use with THK mounting only. Must include THK mount option on fixture.

15 For use with yoke mounting only. Must include yoke mount option on fixture.

16 Maximum allowable wattage lamp included. KFL3 only.


18 Prefix with KFLWFL and size (e.g., KFLWFL2BVG).


KFL270S, 70M, 70MHC, 100S, 100M,

100MHC, 150S, 150M, 150MHC, 175MSP, BP, RN, RM, RW, HPN, HPM, HPW, FT

KFL3175M, 200M, 250S, 250M, 320M,

350M, 400S, 400MSP, RN, RM, RW, HPN, HPM, HPW, FT


DISTRIBUTIONCIRCUIT TYPE

LAMP SHAPE

BEAM SPREAD H° x V°

NEMA DIST.

150S SP HX-HPF E17 142 x 127 3 x 1150S HPW HX-HPF E17 39 x 12 7 x 6400S SP CWA ET18 60 x 13 4 x 1400S HPW CWA ET18 144 x 140 7 x 7175M SP CWA ED17 27 x 15 2 x 1175M HPW CWA ED17 147 x127 7 x 6400M SP CWA BT28 42 x 17 3 x 1400M HPW CWA BT28 146 x 140 7 x 7

W

H OH

D

KFL2 KFL3 EPA: 1.3ft2 (0.12m2) 2.0ft2 (0.19m2) Width: 17 (43.2) 20 (50.8) Depth: 8-1/8 (20.6) 9-1/8 (23.2) Height: 9-7/8 (25.1) 13-1/8 (33.3) Overall height: 14 (35.6) 16-7/8 (42.9) Max. weight: 29 lbs (13.1 kg) 44 lbs (19.9 kg)


PRODUCT INFORMATION

LITHO

NIA

OU

TDO

OR


FLOO

DLIG

HTIN

GSpecification

170SIntended Use

For airport aprons or

parking areas.

Construction


gauge, aluminum housing.

Continuous welded seams


Aluminum door frame se-

cured with four stainless

steel latches. Thermal-

resistant and shock-resistant

tempered flat lens.






Optics

Anodized aluminum reflector

with internal glare control

louver, painted matte black

to provide an asymmetrical

beam pattern with sharp

vertical cutoff.

Electrical

Electrical components mount-

ed to heavy-gauge plate to

maximize heat dissipation and

structural integrity.


factory tested. Constant

wattage autotransformer.









Socket: Horizontal, mogul-

base porcelain socket with



tact. UL Listed 1500W-600V,

4KV pulse rated.

Installation

Painted steel yoke, complete

with vertical angle selector,

retaining stop and 3-foot,

14/3 cable, is standard.

Listings




wet locations.


170S High pressure sodium

250S

400S

1000S

Metal halide

320M1

350M1

400M

1000M2

HPN Narrow asymmetric 120

2083

2403

277

347

4803

TB4

23050HZ5

Ships installed




Ships separately6

HRBW HID remote ballast weatherproof (black)

HRB HID remote ballast (white)

Ships installed

(blank) Yoke (std.)

Ships separately

TS Tenon slipfitter (2-3/8" OD max.)6, 7

MPB29 Mounting pole bracket for 2 fixtures at 90 degrees8




Ships installed







Ships separately6





SC Shorting cap

UV Upper visor7


DBL Black

DGC Charcoal gray

DMB Medium bronze


DWH White



LPI Lamp included

L/LP Less lamp

ORDERING INFORMATION Lead times will vary depending on options selected. Consult with your sales representative. Example: 170S 400S HPN 120 SF LPI


LAMP/FIXTURE DATA

LAMP TYPE DIST. BALLAST LAMP SHAPEBEAM SPREAD

H° x V°NEMA DIST.

250S HPN CWA ET18 128 x 55 6 x 4400S HPN CWA ET18 129 x 52 6 x 4

1000S HPN CWA E25 132 x 56 7 x 4400M HPN CWA BT37 139 x 68 7 x 4

1000M HPN CWA BT37 138 x 63 7 x 4

20(50.8)

EPA: 2.7 ft2 (0.25 m2) Max. weight: 83 lbs (37.6 kg)

20-1/2(52.1)

19-7/8(50.5)


Notes1 Must be ordered with SCWA.

2 Requires a BT-37 reduced jacket lamp.






8 MPB bracket ships separately with junction box and hinge mecha-nisms. Bracket weight: 12 lbs. Must be ordered with fixture.



PRODUCT INFORMATION

LITH

ON

IA O

UTD

OO

R


SpecificationFL

OO

DLI

GH

TIN

G


95

95V


1000S

Metal halide

1000M

Horizontal lamp

RMH Medium horizontal lamp

RNH Narrow horizontal lamp1

RWH Wide horizontal lamp

BPH Bi-peak symmetric horizontal lamp2

SPH Spot horizontal lamp2

Vertical lamp

RMV Medium vertical lamp

RNV Narrow vertical lamp3

RWV Wide vertical lamp

BPV Bi-peak symmetric vertical lamp2

SPV Spot vertical lamp2

120

2084

2404

277

347

4804

TB5

23050HZ6

Ships installed




Ships separately7



Mounting Options Finish Lamped

Ships installed

(blank) Yoke (std.)


TS Tenon slipfitter (2-3/8" OD max.)

Ships installed





Ships separately7





SC Shorting cap

VG Vandal guard10

FV Full visor8, 10

UV Upper visor8, 10

BV Bottom visor8, 10

CV Concentric visor8, 10

GV Glare visor (three sided)8, 10


DBL Black

DMB Medium bronze


DWH White



LPI Lamp included

L/LP Less lamp

95Intended Use

For large area facade or

monument floodlighting.

Construction


gauge, aluminum housing,

horizontal (95) or vertical

(95V) lamp orientation. Con-

tinuous welded seams, fully

gasketed for weathertight in-

tegrity. Aluminum doorframe

secured with four stainless

steel latches. Thermal-

resistant and shock-resistant

tempered flat lens.






Optics

Segmented anodized

aluminum, precisely

formed to provide varying

rectangular beam patterns

(non-rotatable).

Electrical

Electrical components mounted

to heavy-gauge plate to

maximize heat dissipation and

structural integrity. Ballast:


tested. Constant wattage

autotransformer.





1500W-600V. 4KV pulse

rated. Uses BT 56 lamp.

Installation

Painted steel yoke complete

with vertical angle selector

stop, re-aiming, and 3-foot,

14/3 cable is standard.

Listings




wet locations.

ORDERING INFORMATION Lead times will vary depending on options selected. Consult with your sales representative. Example: 95 1000S RMH 120 SF LPI


DISTRIBUTION DATA95 95V

DISTRIBUTION 1000M 1000S 1000M 1000SRMH 4 x 1 5 x 2 3 x 5 6 x 6RNH 3 x 1 - 3 x 3 5 x 6RWH 5 x 1 5 x 1 3 x 5 6 x 6BPH - - 4 x 5 6 x 6SPH 2 x 1 4 x 1 - -RMV 5 x 3 6 x 6 1 x 4 2 x 5RNV 3 x 3 6 x 5 1 x 3 -RWV 5 x 4 6 x 6 1 x 4 1 x 5BPV 5 x 4 6 x 6 - -SPV - - 1 x 2 1 x 4



24-1/2(62.5)

30(77.0)

12-1/2(31.8)

95

17(43.0)

30(77.0)

21(53.5)


95V

Notes1 Not available with 95 1000S.

2 BPH and SPV for use with 95V only. SPH and BPV for use with 95 only.

3 Not available with 95V 1000S.


5 Multi-tap ballast (120V, 208V, 240V, 277V). In Canada 120V, 277V, 347V; ships as 120V/347V.





10 Prefix with fixture name and size (e.g., 95UV).

PRODUCT INFORMATION

LITHO

NIA

OU

TDO

OR


FLOO

DLIG

HTIN

GSpecification

55Intended Use

For large area facade or

monument floodlighting.

Construction


gauge, aluminum housing,

horizontal (55) or vertical

lamp (55V) orientation.

Continuous welded seams,

fully gasketed for weather-

tight integrity. Aluminum

doorframe secured with

four stainless steel latches.

Thermal-resistant, tempered

flat lens.






Optics


tor. Seven distributions

available to provide varying

rectangular beam patterns

(non-rotatable).

Electrical








autotransformer. Super CWA







required for probe start ship-

ments outside the U.S.





1500W-600V. 4KV pulse rated.

Installation

Painted, steel yoke complete

with angle selector, aiming

stop, and 3-foot, 14/3 cable

is standard.

Listings




wet locations.


55

55V


1000S

Metal halide

320M1

350M1

400M

1000M

RMA Medium A2

RNA Narrow A2

RWA Wide A2

RME Medium E3

RNE Narrow E3

RWE Wide E3

RPN Narrow peak3

120

2084

2404

277

347

4804

TB5

23050HZ6

Ships installed




Ships separately7



Ships installed

(blank) Yoke (std.)


TS Tenon slipfitter (2-3/8" OD max.)


Ships installed







Ships separately7





SC Shorting cap

VG Vandal guard11

WG Wire guard11

FV Full visor8, 11

UV Upper visor8, 11


GV Glare visor (three sided)8, 11


DBL Black

DGC Charcoal gray

DMB Medium bronze


DWH White



LPI Lamp included

L/LP Less lamp

ORDERING INFORMATION Lead times will vary depending on options selected. Consult with your sales representative. Example: 55 1000S RPN TB LPI


DISTRIBUTION DATA55 55V

DISTRIBUTION 1000M 400M 1000S 1000M 400M 1000SRME 6 x 5 6 x 5 6 x 5 4 x 6 5 x 6 5 x 6RNE 6 x 4 6 x 4 6 x 4 4 x 6 4 x 6 4 x 6RPN 6 x 2 6 x 2 5 x 1 1 x 6 1 x 6 1 x 5RWE 6 x 5 6 x 5 6 x 5 5 x 6 5 x 6 5 x 6RNA 5 x 1 - - 1 x 5 - -RMA 6 x 6 - - 6 x 6 - -RWA 6 x 5 - - 6 x 7 - -



23-1/4(59.1)

17-1/3 (44.0)

23-1/4(59.1)

55

17-3/8(44.1)

12-1/2 (31.8)

32-1/2(82.6)


55V

Notes1 Must be ordered with SCWA.

2 RMA, RNA, RWA are for use with 1000M only and require standard BT-56 lamp.

3 RME, RNE, RPN, RWE require reduced jacket BT-37 lamp with 1000M.








11 May be ordered as accessory. Prefix with fixture name (e.g., 55UV).

PRODUCT INFORMATION

LITH

ON

IA O

UTD

OO

R


Specifi cationFL

OO

DLI

GH

TIN

G


HFA

HFL


250S

400S

Metal halide

250M

400M3

HFA

TA Horizontal

RN Narrow symmetric

HFL

RA2 Rectangular beam

120

2084

2404

277

347

4804

TB5



(blank) Yoke (std.)


Ships installed

TP Tamperproof latches6






LPI Lamp included

L/LP Less lamp

HFAHFL

Intended Use

For general to heavy indus-

trial applications, including

Class 1, Division 2 classifi ed

hazardous locations, marine

and corrosive environments,

or wherever excessive vibra-

tion and dirt may exist.

Construction

Housing: NEMA heavy-duty

constructed housing. Die-cast

copper-free (<.4%) aluminum

housing with round corners

and front bezel. Front bezel is

removable via position-

oriented hinge-cam design.

Lens is thermal- and shock-

resistant, clear, tempered

glass with no metal-to-

glass contact. Hardware is

corrosion-resistant. Standard

fi nish is dark bronze (DDB)


powder. Additional architec-



Optics

Computer-designed,

precision-formed refl ectors

for high performance and

effi cency. Premium one-piece

silicone gasket seals optical

chamber to inhibit entrance

of contaminants. HFL 400W

metal halide requires an ED28

reduced jacketed lamp.

Electrical


mounted to cast aluminum

housing, promoting

maximum heat dissipa-

tion. Electrical: Ballast: All




above. Super CWA Pulse Start

ballasts, 88% effi cient and







outside the U.S..

Socket: Porcelain, horizontally

oriented mogul-base socket





Installation

HFA: front bezel is latched

for easy tool-less internal

access to optical and electrical

compartments. Corrosion-re-

sistant, heavy-duty, painted

steel mounting yoke. Three-

quarter-inch female threaded

conduit hub provided.

Listings


Certifi ed (see Options). UL

Listed Class 1, Division 2,

Groups A, B, C and D for haz-

ardous locations. UL Listed

for marine outside locations.

IP65 rated.

ORDERING INFORMATION Lead times will vary depending on options selected. Consult with your sales representative. Example: HFA 400S TA 120 LPI



HFA 250S, 250M, 400S, 400M TA, RNHFL 400S, 400M RA2

TEMPERATURE CODES

SERIES LAMP TYPET-CODE OR

TEMP.MAX. INTERNAL

TEMP.HFA 250M T1 336°CHFA 400M T1 343°CHFA 250S T1 301°CHFA 400S T1 352°CHFL 400M T1 433°CHFL 400S T1 426°C

Notes1 Specify lamp type and distribution. See Confi gurations table.


3 HFL 400M must use reduced jacket ED-28 lamp.



6 HFA only.



24(61.0)

10(25.4)

24-3/8(61.9)

HFA

15-3/4(40.0)

16-1/8(40.9)

6-1/8(15.5)

EPA: 1.3 ft2 (.12 m2) Max. weight: 27 lbs (12.3 kg)

HFL

PRODUCT INFORMATION

LITHO

NIA

OU

TDO

OR


FLOO

DLIG

HTIN

GSpecification

Series Lamp type1 Distribution1 Voltage Ballast Mounting Options Finish Lamped

HFM

HFR


100S

150S

250S

400S

Metal halide

175M3

250M

400M

RG Horizontal

TA Horizontal

RB Vertical

RC Vertical

120

2084

2404

277

347

4805

TB6



(blank) Yoke (std.)

Ships installed






LPI Lamp included

L/LP Less lamp

Intended Use

For general to heavy indus-

trial applications, including

Class 1, Division 2 classified

hazardous locations, marine

and corrosive environments,

or where excessive vibration

and dirt may exist.

Construction

Housing: NEMA heavy-duty

constructed housing. Die-cast

copper-free (<.4%) aluminum

housing with rounded corners

and front bezel. Front bezel is

removable via position-

oriented hinge-cam design.

Lens is thermal- and shock-

resistant, clear, tempered

glass with no metal-to-

glass contact. Hardware is

corrosion-resistant. Standard

finish is dark bronze (DDB)


powder. Additional architec-



Optics

Computer-designed,

precision-formed reflector

for high performance and ef-

ficiency. Premium one-piece

silicone gasket seals optical

chamber to inhibit entrance


Electrical


mounted to cast aluminum

housing, promoting







175W and above. Super CWA







required for probe start ship-

ments outside the U.S..

Socket: Porcelain, horizontally

oriented, mogul-base (HFR)

or medium-base (HFM) socket





Installation

Corrosion-resistant, heavy-

duty, painted steel mount-

ing yoke. Three-quarter-inch

female threaded conduit

hub provided.

Listings



Listed, Class 1, Division 2,

Groups A, B, C and D for haz-

ardous locations. UL Listed

for marine outside locations.

IP65 rated.

ORDERING INFORMATION Lead times will vary depending on options selected. Consult with your sales representative. Example: HFR 400S TA 120 LPI


AVAILABLE CONFIGURATIONSSERIES LAMP TYPE DISTRIBUTION

HFR150S, 175M, 250S, 250M, 400S,

400MTA, RB, RC

HFM 100S, 150S RB, RG

TEMPERATURE CODES

SERIES LAMP TYPET-CODE OR

TEMP.MAX. INTERNAL

TEMP.HFR 250M T1 347°CHFR 400M T1 359°CHFR 150S T2B 238°CHFR 250S T1 332°CHFR 400S T1 376°CHFM 100S 280 280°CHFM 150S 350 341°C

W D

H

HFR HFM EPA: 1.3 ft2 (0.12 m2) 0.5 ft2 (0.05 m2) Width: 17-5/8 (44.8) 10-1/2 (26.9) Depth: 10-3/4 (32.4) 6-3/4 (17.5) Height: 10-7/8 (27.4) 18-1/2 (47.0) Weight: 20 lbs (9.0 kg) 35 lbs (15.8 kg)




3 Not available with HFM SCWA.


5 Not available in Canada.


HFRHFM

PRODUCT INFORMATION

LITH

ON

IA O

UTD

OO

R


General PurposeFL

OO

DLI

GH

TIN

G

TFAContour®

Intended Use

For industrial yards, parking

lots, construction sites,

streets and recreational areas.

Construction

Housing: Heavy-duty

construction. Contoured die-

cast aluminum housing and

front bezel. Bezel hinged and

latched for fast, easy tool-

less internal access to optical

and electrical compartments.

Lens is heavy-duty, thermal-

and shock-resistant, clear,

tempered glass with no

metal-to-glass contact.






Optics

Computer-designed, preci-

sion die-formed, specular

anodized aluminum reflector

provides high efficiencies.

Premium, one-piece silicone

gasket seals optical chamber

to inhibit entrance of outside

contaminants.

Electrical


















tally or vertically oriented,

mogul-base socket with cop

per alloy, nickel-plated screw


Listed 1500W, 600V.

Installation

Tool-less latches on front

bezel can be opened while

wearing gloves. Corrosion-

resistant, painted steel yoke.

Listings

UL Listed (standard) (ambi-

ent temperature 25°C for

750W and above, 40°C for

400W and below). CSA Certi-

fied or NOM Certified (see

Options). UL Listed for wet

locations. IP65 rated.


TFA High pressure sodium2

250S

400S

750S3

1000S

Metal halide

250M

320M4

350M4

400M

750M4

1000M

RN Horizontal

TA Horizontal

RB Vertical

RC Vertical

RE Vertical

RM Vertical

TA2 Vertical

120

2085

2405

277

347

4805

TB6

23050HZ7




Ships installed

(blank) Yoke (std.)

IS Integral slipfitter (2-3/8" OD tenon)


AFTM Tenon mount

FRWB Radius wall bracket

FSPB Steel square pole bracket


Ships installed





QRSTD Quartz restrike time delay10


C22 2' 12-3 cord prewired12






Ships separately8





SC Shorting cap

VG Vandal guard13

WG Wire guard13

FV Full visor9, 13

UV Upper visor9, 13


(blank) Dark bronze

DBL Black

DGC Charcoal gray

DMB Medium bronze


DWH White



LPI Lamp included

L/LP Less lamp

ORDERING INFORMATION For shortest lead times, configure products using bolded options. Example: TFA 1000M TA TB LPI



TFA 250S, 250M, 320M, 350M, 400S, 400M RN, TA, RB, RC, TA2, RMTFA 750M RN, TATFA 750S, 1000S RN, TA, RB, TA2, RMTFA 1000M RN, TA, RB, RE, TA2, RM



3 Not available in multi-tap ballast.









12 Yoke-mount only.

13 Prefix with fixture name (e.g., TFAUV).


DIST. CIRCUIT LAMP

SHAPEBEAM SPREAD

H° x V°NEMA DIST.

400S TA CWA ET18 140 x 134 7 x 7400S RN CWA ET18 127 x 30 6 x 3400S TA2 CWA ET18 138 x 112 7 x 6400S RB CWA ET18 126 x 106 6 x 6

1000S TA CWA E25 139 x 133 7 x 71000S RN CWA E25 127 x 21 6 x 21000S TA2 CWA E25 144 x 119 7 x 61000S RB CWA E25 128 x 114 6 x 6400M TA CWA BT37 143 x 133 7 x 7400M RN CWA BT37 129 x 35 6 x 3400M TA2 CWA BT37 135 x 111 7 x 6400M RB CWA BT37 124 x 100 6 x 6

1000M TA CWA BT56 146 x 135 7 x 71000M RN CWA BT56 130 x 45 6 x 31000M TA2 CWA BT56 144 x 119 7 x 61000M RB CWA BT56 126 x 109 6 x 6 9-3/4

(24.8)

22-1/2(57.2)

22(55.9)

EPA: 2.6 ft2 (0.24 m2)Max. weight: 65 lbs (29.5 kg)


PRODUCT INFORMATION

LITHO

NIA

OU

TDO

OR


FLOO

DLIG

HTIN

GGeneral Purpose


TFL High pressure sodium1

70S

100S

150S

200S

250S

400S

Metal halide

150M

175M2

200M3

250M

320M3

350M3, 4

400M4


150MHC

RA2 Rectangular beam

TA2 Vertical (max 250W)

120

2086

2406

277

347

4806

TB7

23050HZ8




Ships installed

(blank) Yoke (std.)



AFTM Tenon mount11

FRWB Radius wall bracket11

FSPB Steel square pole bracket11

FTS Tenon slipfitter (2-3/8" to 2-7/8" OD tenon)12

FCRA Crossarm adaptor12

FCRA45 Crossarm adaptor (45 degrees from horizontal)12

FPMB Wall/pole mounting bracket12

FSAB Steel angle bracket12

FCX2 2-Light wood pole crossarm12



FWPB Wall/wood pole/pipe bracket12


Ships installed









CF Charcoal filter




Ships separately9





SC Shorting cap

VG Vandal guard16

WG Wire guard16

FV Full visor10, 16

UV Upper visor10, 16

(blank) Dark bronze

DBL Black

DGC Charcoal gray

DMB Medium bronze


DWH White



LPI Lamp included

L/LP Less lamp

TFLContour®

Intended Use

For recreation areas, parking

lots, building facades and

car lots.

Construction

Housing: Compact, soft-

corner, die-cast aluminum

housing and front cover.

Front bezel is fully sealed

with one-piece, bonded

silicone gasket. Lens is

thermal- and shock-resistant,

clear, tempered glass.






Optics

TA2: vertical lamp with one-

piece, hydro-formed, anodized

aluminum reflector. Two-

position adjustable socket.

RA2: Horizontal lamp with

anodized specular aluminum

reflector. Both have sealed op-

tic chamber to inhibit entrance


Electrical

Components mounted to

cast-aluminum housing for

maximum heat-dissipation.

















outside the U.S.

Socket: Porcelain, verti-

cally or horizontally oriented

mogul-base socket with



tact. UL Listed 1500W, 600V,

4KV pulse rated.

Installation

Corrosion-resistant, heavy-

duty, painted steel yoke.

External screws treated for

corrosion resistance. Above-

horizontal aiming standard.

Listings



320W and above and 200S,

40°C for 250W and below).

CSA Certified or NOM Certi-

fied (see Options). UL Listed

for wet locations. IP65 rated.

ORDERING INFORMATION For shortest lead times, configure products using bolded options. Example: TFL 400S RA2 TB LPI



2 Universal mogul base lamp allows TFL to be available with SCWA.


4 Requires T-15, ED or BT28 reduced jacket lamp.







11 For use with slipfitter.

12 For use with yoke.



15 Yoke mount only.

16 May be ordered as accessory. Prefix with fixture name (ie TFLUV).


DIST. CIRCUITLAMP

SHAPEBEAM SPREAD

H° x V°NEMA DIST.

100S TA2 HX-HPF E17 148 x 123 7 x 6150S TA2 HX-HPF E17 155 x 119 7 x 6250S RA2 CWA BT28 143 x 111 7 x 6400S RA2 CWA BT28 143 x 111 7 x 6175M TA2 CWA BT28 147 x 122 7 x 6250M RA2 CWA BT28 140 x 104 7 x 6400M RA2 CWA BT28 145 x 100 7 x 6

EPA: 1.3 ft2 (0.12 m2)Weight: 27 lbs (11.8 kg)

15-3/4 (40.0)

6-1/8 (15.6)

16-1/8 (40.9)

6(15.2)

2(5.1)

1-1/4(3.2)

1-1/4(3.2)

5/8(1.6)

1/2(1.3)

1/2(1.3)


PRODUCT INFORMATION

LITH

ON

IA O

UTD

OO

R


General PurposeFL

OO

DLI

GH

TIN

G


2 Universal mogul base lamp allows TFL to be available with SCWA.



5 Not available with 150S.



8 Consult factory for available wattage.



11 Requires IS or FTS slipfitter.

12 Yoke mounting only.

13 Prefix with fixture name (e.g., TFREY) when ordered as accessory.




TFR High pressure sodium1

150S

250S

400S

Metal halide

150M

175M2

200M3

250M

320M3

350M3

400M

Metal halide ceramic

150MHC4

RB Horizontal

RC Horizontal

TA Horizontal5

120

2086

2406

277

347

4806

TB7

23050HZ8




Ships installed

(blank) Yoke (std.)



AFTM Tenon mount11


FSPB Steel square pole bracket11

FTS Tenon slipfitter (2-3/8" to 2-7/8" OD tenon)12

EY Extended yoke12, 13

FWPB Wall/wood pole/pipe bracket12


Ships installed









CF Charcoal filter




Ships separately9





SC Shorting cap

VG Vandal guard13

WG Wire guard13

FV Full visor10, 13

UV Upper visor10, 13

(blank) Dark bronze

DBL Black

DGC Charcoal gray

DMB Medium bronze


DWH White



LPI Lamp included

L/LP Less lamp

TFRContour®

Intended Use

For recreation areas, parking

lots, building facades and

car lots.

Construction

Housing: Compact, soft

corner, die-cast aluminum

housing and front cover.

Front bezel is removable via

position-oriented hinge-cam

design and is fully sealed

with one-piece, bonded

silicone gasket. Lens is

thermal- and shock-resistant







Optics

Die-formed, anodized

aluminum reflectors

provide rectangular, uniform

distributions. Three available

beam distributions for

maximum flexibility in area

lighting applications.

Electrical

Components mounted to

cast-aluminum housing,


dissipation. Ballast: High


for 150W. Constant wattage













Socket - Porcelain (medium

base: 150M; mogul base: all

others), horizontally oriented

with copper alloy, nickel




Installation

Corrosion-resistant,

heavy-duty, painted steel

mounting yoke. External

screws treated for corrosion

resistance. Above-horizontal

aiming standard.

Listings



320W and above, 40°C for

250W and below). CSA




ORDERING INFORMATION For shortest lead times, configure products using bolded options. Example: TFR 400M TA TB SCWA LPI



6(15.2)

2(5.1)

1-1/4(3.2)

1-1/4(3.2)

5/8(1.6)

1/2(1.3)

1/2(1.3)


DIST. CIRCUIT LAMP

SHAPEBEAM SPREAD

H° x V°NEMA DIST.

150S RB XHP E17 114 x 107 6 x 6150S RC XHP E17 100 x 92 5 x 5250S TA CWA ET18 132 x 118 7 x 6250S RB CWA ET18 110 x 104 6 x 6250S RC CWA ET18 99 x 97 5 x 5400S TA CWA ET18 132 x 118 7 x 6400S RB CWA ET18 110 x 104 6 x 6400S RC CWA ET18 99 x 97 5 x 5175M TA CWA BT28 132 x 111 7 x 6175M RB CWA BT28 121 x 91 6 x 5175M RC CWA BT28 100 x 90 5 x 5250M TA CWA BT28 132 x 111 7 x 6250M RB CWA BT28 121 x 91 6 x 5250M RC CWA BT28 100 x 90 5 x 5400M TA CWA BT37 138 x 119 7 x 6400M RB CWA BT37 124 x 107 6 x 6400M RC CWA BT37 96 x 100 5 x 5

17-5/8(44.8)

12-3/4(32.4)

10-3/4(27.3)

EPA: 1.3 ft2 (0.12 m2)Weight: 29 lbs (13.2 kg)

PRODUCT INFORMATION

LITHO

NIA

OU

TDO

OR



DISTRIBUTION CIRCUITLAMP

SHAPEBEAM SPREAD

H° x V°NEMA DIST.

70S RB RNP or XHP E17 94 x 104 5 x 670S RG RNP or XHP E17 42 x 35 3 x 370S TA RNP or XHP E17 131 x 103 7 x 6

150S RB RNP or XHP E17 88 x 95 5 x 5150S RG RNP or XHP E17 57 x 65 4 x 4150S TA RNP or XHP E17 131 x 103 7 x 6100M RB XHP E17 83 x 108 5 x 6100M RG XHP E17 58 x 60 4 x 4100M TA XHP E17 128 x 107 6 x 6175M RB CWA ED17 97 x 105 5 x 6175M RG CWA ED17 42 x 35 4 x 426DTT RB electronic, HPF T4 125 x 132 6 x 642TRT RB electronic, HPF T4 120 x 122 6 x 6

FLOO

DLIG

HTIN

GGeneral Purpose


TFM High pressure sodium1

35S2

50S

70S

100S

150S

Metal halide

50M1, 3

70M1, 3

100M1

150M

175M4, 5


50MHC1, 3

70MHC1, 3

100MHC1

150MHC


13DTT

18DTT

26DTT

32TRT

42 TRT

RB Horizontal

RG Horizontal

TA Vertical7

120

2088

2408

277

347

4808

TB9

MVOLT10

23050HZ11




XHP High reactance (lag), high power factor12

Ships installed

(blank) 1/2" threaded knuckle (std.)

YK Yoke mount


AFTM Tenon mount

TFMTS Tenon slipfitter


Ships installed

SF Single fuse, 120V, 277V, 347V5

DF Double fuse, 208V, 240V, 480V5







NOM Meets Mexican standards (Consult factory)

INTL International shipment for 175M probe start

Ships separately17

VG Vandal guard

WG Wire guard

FV Full visor14

UV Upper visor14

(blank) Dark bronze

DBL Black

DGC Charcoal gray

DMB Medium bronze


DWH White



LPI Lamp included

L/LP Less lamp

TFMContour®

Intended Use

For signs, flags, building

facades and landscaping.

Construction

Housing: Compact, heavy-

duty construction. Die-cast

aluminum housing and

removable front bezel. Lens is

thermal- and shock-resistant,


Standard finish is dark






Optics

Hydroformed, anodized

aluminum, faceted parabolic

(RB, RG) or die-formed (TA)

construction provides high

efficiencies.

Electrical


factory tested. HPS: 120V is

reactor normal-power factor

standard (XHP available).

208V, 240V, 347V, 480V,

and TB are high reactance,

high power factor standard.

MH: High reactance high



autotransformer for 175M.

150W and below are standard

with pulse-start ignitor

technology. CSA, NOM or



for 175M. Not available 175M

SCWA. Compact fluorescent


frequency ballast.


base, horizontally-oriented

(RB, RG) or vertically-orient-

ed (TA) socket with copper al-

loy, nickel-plated screw shell


1500W, 600V. 4-pin socket

for compact fluorescent. LPI


Installation

Die-cast aluminum 1/2 "

NSPM threaded mounting

knuckle is standard.

Corrosion-resistant, painted

steel yoke optional. Above-

horizontal aiming standard.

External screws treated for

corrosion resistance.

Listings

UL Listed (standard) (ambient

temperature 25°C for 150M

and above; 40°C for 100M and

below, 150S and below). CSA




ORDERING INFORMATION For shortest lead times, configure products using bolded options. Example: TFM 100M RB 120 LPI


10-1/2(26.7)

10-5/8(26.6)

EPA: 0.5 ft2 (0.05 m2) Weight: 15 lbs (6.8 kg)

6-7/8(17.5)



2 120V only, n/a XHP.



5 Not available with TA distribution.


7 TA distribution not available with 175M, compact fluorescent lamps or fusing.



10 Optional multi-volt electronic ballast (for compact fluorescent lamps only) capable of operating on any line voltage from 120V-277V.


12 Available for 120V only. Standard for 208V, 240V, 277V, 347V and TB. HPS only.



15 Must be ordered with fixture; cannot be field installed. Not available 347, 480, or TB.

16 Yoke mounting only.

17 Prefix with fixture name (e.g., TFMUV) when ordered as accessory.

PRODUCT INFORMATION

LITH

ON

IA O

UTD

OO

R


SportslighterFL

OO

DLI

GH

TIN

G

TSPTru-Sport®

Intended Use

For stadiums, fields, arenas,

tracks or courts.

Construction

Housing: Two-piece, die-cast

aluminum ballast housing

mounted to steel trunnion.

Removable ballast is hinged

with captive fastener. Steel

trunnion features both verti-

cal and horizontal aiming

scale with vertical reposition-

ing stop. Standard finish

is white (DWH) corrosion-





Optics

Heavy-gauge anodized re-

flector with five distributions

available. Transverse mount-

ing of lamp. Lamp support

included. Optical chamber is

sealed to inhibit entrance of

contaminants. Heavy-duty

hinged lens is thermal-re-

sistant, shock-resistant and

impact-resistant tempered

glass. Lens frame is secured

by spring clips for servicing

of lamp. "Flux manager"

(NFX, WFX, MFX) available

for optimal glare and spill

light control. Choice of gen-

eral purpose or heavy-duty

(shrouded) reflectors.

Electrical

All electrical components

are thermally isolated from

optical assembly, promoting

longer life. All bal-





ballast, 88% efficient and


is required for 400W (must





Socket: Die-cast socket hous-

ing. Porcelain, mogul-base



spring-loaded center contact.

UL Listed 1500W-600V, 4KV

pulse rated.

Installation

Fixture is mounted by secur-

ing trunnion directly to cros-

sarm. Mounting hardware is

provided. Below horizontal

aiming only. All external

hardware is treated for corro-

sion resistance.

Listings

UL Listed (standard). CSA Certi-

fied (see Options). UL Listed for

25°C ambient and wet loca-

tions. US Patent No. 6,190,023.

Canadian Patent No. 2,212,014.

Other patents pending.

Wattage Lamp type Distribution Voltage Ballast Mounting

TSP 400M

1000M

1500M1

General purpose

GP24N

GP24NFX

GP24M

GP24MFX

GP24W

GP24WFX

Heavy duty2

HD24N

HD24NFX

HD24M

HD24MFX

HD24W

HD24WFX

120

2083

2403

277

347

4803

TB4

23050HZ5




Ships installed

(blank) Yoke (std.)

Ships separately6

FRWB Radius wall bracket

FTS Tenon slipfitter (2-3/8" to 2-7/8" OD tenon)

FCRA Crossarm adaptor

FCRA45 Crossarm adaptor (45° from horizontal)

FPMB Wall/pole mounting bracket

FSAB Steel angle bracket

FCX2 2-Light wood pole crossarm



Options Finish




C22 2' 12-3 cord prewired



CV3P 3' of 16-3 cord prewired with 3-prong plug for use with prewired cages8

CF Charcoal filter9

SLR Stainless steel lens ring

WC Mounting bolt for wooden crossarm




(blank) White (std.)

DDB Dark bronze

DBL Black

DMB Medium bronze




ORDERING INFORMATION For shortest lead times, configure products using bolded options. Example: TSP 1500M GP24N TB


20(50.8)

24-1/2(62.2)

EPA: 3.3 ft2 (0.91m2)Max weight: 55 lbs (24.9 kg)



2 Heavy-duty anodized aluminum shroud painted to match fixture.




6 May be ordered as an accessory. Must specify finish.


8 Must use mating receptacle, provided by others (N/A 1500M 120V).

9 HD option must be ordered.

PRODUCT INFORMATION

LITHO

NIA

OU

TDO

OR


FLOO

DLIG

HTIN

GSportslighter


TV High pressure sodium1

400S

1000S

Metal halide

400M

1000M

1500M1

General purpose

GP22

GP32

GP4

GP5

GP6

Heavy duty3

HD2

HD3

HD4

HD5

HD6

120

2084

2404

277

347

4804

TB5

23050HZ6

Ships installed









TVTS Tenon slipfitter

FSAB Steel angle bracket




Options Finish

Ships installed








CV3P 3' of 16-3 cord prewired with 3-prong plug for use with prewired cages12

CF Charcoal filter13

SLR Stainless steel lens ring

WC Mounting bolt for wooden crossarm

LS Lamp support

AH Above horizontal aiming

IBL Internal bottom louver




Ships separately7





SC Shorting cap

UV Upper visor8


DBL Black

DMB Medium bronze


DWH White



TVIntended Use

Ideal for recreational or com-

petitive sports fields, parking

areas and industrial yards.

Construction

Housing: Heavy-gauge,

hydroformed aluminum

ballast housing mounted to

integral die-cast monoframe

with horizontal degree aim-

ing scale and repositioning

locator. Die-cast aluminum

socket housing provides

vertical aiming adjustment

with degree aiming scale and

repositioning stop.


bronze polyester powder. Ad-

ditional architectural colors

available; see


Optics

Heavy-gauge anodized

aluminum reflectors provide

a range of NEMA beam

spreads. Optical chamber

sealed to inhibit entrance of

contaminants. Hinged lens

is heavy-duty, thermal-,

shock- and impact-resistant

tempered glass.

Electrical

All electrical components

are thermally isolated from

optical assembly, promoting

longer life. All bal-





ballast, 88% efficient and


is required for 400W (must





Socket: Porcelain, mogul-




Listed 1500W, 600V.

Installation

Mounted by securing integral

cross arm mounting bracket

directly to cross arm. No

additional adaptors are

required. A 5/8" 11UNC

mounting bolt provided.

Exposed bolt length: 1-1/2".

Listings



(see Options). UL Listed

for 25°C ambient and wet

locations.

ORDERING INFORMATION For shortest lead times, configure products using bolded options. Example: TV 1000M GP4 TB


Heavy-Duty Shroud (HD)

General Purpose Reflector (GP)

G O D A W G S

L

D

NEMA 2, 3 NEMA 4, 5, 6

EPA: 2.9 ft2 (0.27m2) 2.5 ft2 (0.23 m2)Diameter: 23-1/8 (58.7) 21-1/2 (54.6)

Length: 30 (76.2) 31-1/2 (80.0)Weight: 53 lbs (24.0 kg) 53 lbs (24.0 kg)



2 Not available with 1000S.

3 Heavy-duty anodized aluminum shroud painted to match fixture.






9 For use with slipfitter.


11 Photocell not included. Not available 1500M.

12 Must use mating receptacle, provided by others (n/a 1500M 120V).

13 HD option must be ordered.

PRODUCT INFORMATION

LITH

ON

IA O

UTD

OO

R


Contractor Select StockFL

OO

DLI

GH

TIN

G

Intended Use

Floodlight for commercial

or residential signs, entry

monuments or facades.

HID, quartz, and compact

fluorescent sources.

Construction

Rugged, die-cast aluminum

housing is ribbed for maxi-

mum heat dissipation. Die-

cast aluminum doorframes.

F500QL lens attaches with

clips. FP is polycarbonate.

Finish is dark

Optics


tors with high efficiency and

wide beam spread. F150MSL

features a spot distribution.

Electrical

120 volt reactor, normal

power factor for 50-150 HPS

and 70-100MH. Quad tap,

high reactance, high power

factor for 150M. Medium

base socket.

Quad tap, super CWA for 250M

and 400M. Mogul-base socket.

120V for 13W (for CFL) or

500W (for quartz). Lamps

included. 13W compact fluo-

rescent lamp is a twin-tube.

Double-ended 1500W

voltage determined by lamp

(not included).

Installation

Floodlights feature adjust-

able mounting knuckle with

1/2" NPS threaded stem.

Mounts to standard outlet

boxes. Medium floods (250M

and 400M) are yoke mount.

Listings




standards. 25°C maximum

ambient temperature. Fix-

tures are covered by Lithonia

Lighting 12-month warranty


in manufacture.


CATALOG NUMBER DESCRIPTION WATTAGE LAMP TYPE VOLTAGE FINISH LAMP INCLUDEDAPPROX.

WEIGHT (LBS)STANDARD

CARTON QTY.F50SL 120 M6 Micro floodlight 50S HPS 120 Dark bronze Y 7 6F70SL 120 M6 Micro floodlight 70S HPS 120 Dark bronze Y 7 6

F100SL 120 M6 Micro floodlight 100S HPS 120 Dark bronze Y 7 6F150SL 120 M6 Micro floodlight 150S HPS 120 Dark bronze Y 7 6F70ML 120 M6 Micro floodlight 70M MH 120 Dark bronze Y 7 6

F100ML 120 M6 Micro floodlight 100M MH 120 Dark bronze Y 7 6F150ML M4 Small floodlight 150M MH 120/208/240/277 Dark bronze Y 14 4

F150MSL M4 Spot, small floodlight 150M MH 120/208/240/277 Dark bronze Y 14 4F250ML SCWA Medium floodlight 250M MH 120/208/240/277 Dark bronze Y 29 1F400ML SCWA Medium floodlight 400M MH 120/208/240/277 Dark bronze Y 29 1F13L 120 M12 Cast-glass floodlight 13 CFL 120 Dark bronze Y 6 12

F213L 120 M12 Cast-glass floodlight 13 CFL 120 Dark bronze Y 6 12FP213L 120 M12 Polycarbonate floodlight 13 CFL 120 Dark bronze Y 2 12F500QL 120 M12 Cast-glass floodlight 500Q Quartz 120 Dark bronze Y 3 12

F500QLD 120 M12 Cast-glass floodlight 500Q Quartz 120 Dark bronze Y 3 12F1500QD M6 Cast-glass floodlight 1500Q Quartz -- Dark bronze N 6 6

6-1/2(16.5)

8-7/8(22.5)

6-1/8(15.5)


Micro16-1/2(41.9)

7(17.8)

17-1/2(43.5)

Medium

13(33.0)

7-1/8(18.1)

9(22.9)

9(22.9)

Small

8-1/2(21.6)

4-1/2(11.4)

4-1/8(10.5)

FP213L

8-7/8(22.5)

6-1/2(16.5)

3-1/2(8.9)

F500

13(33.0)

8-1/4(21.0)

6(15.2)

F1500QD

FLOODLIGHTS


F50-150

FP213L

F13L/F213LF500

F250-400

PRODUCT INFORMATION

LITHO

NIA

OU

TDO

OR


FLOO

DLIG

HTIN

GContractor Select Stock

WORKLIGHTSIntended Use

Temporary work light for

residential or commercial ap-

plications. Portable unit uses

one 500W quartz lamp; tripod

unit uses two 500W quarts

lamps. Lamp(s) included.

Construction


housing is ribbed for


Die-cast aluminum door-

frame. Tempered glass lens.

Yellow finish.

Installation

Protective wire guard.

Adjustable stand for tripod

configuration. 5' cord set with

grounded plug for portable

unit; 7' for tripod unit. Pad-

ded, insulated handlebar.

Listings

UL Listed to U.S. and Canadi-

an safety standards. UL/C-UL



CATALOG NUMBER DESCRIPTION WATTAGE LAMP TYPE VOLTAGE LAMP INCLUDED APPROX.WEIGHT (LBS) STANDARD CARTON QUANTITYF500QPL M6 Portable worklight 500 Quartz 120 Y 4 6

F2/500QTL M2 Tripod stand worklight 500 Quartz 120 Y 11 2

8-1/4(21.0)

10-7/8(27.6)

12-1/4(31.1)


F500QPL 61(154.9)

22-7/8(58.1)

9(22.9)

F2/500QTL


F2/500QTL

F500QPL

PRODUCT INFORMATION

LITH

ON

IA O

UTD

OO

R


Contractor Select StockFL

OO

DLI

GH

TIN

G

LANDSCAPE FLOODLIGHTING

Intended Use

Ideal for commercial or

residential landscape, sign or

facade applications.

Construction


housing. Landscape post is

constructed of heavy-wall

extruded aluminum.

Electrical

Fixtures are 120V incandescent

only. Lamp is not included.

Installation

Adjustable mounting

knuckle with 1/2" NPS

threaded stem. Mounting

post provides a stable plat-

form for ease of installation.

Listings









CATALOG NUMBER DESCRIPTION WATTAGE LAMP TYPE VOLTAGE FINISH LAMP INCLUDEDAPPROX.

WEIGHT (LBS)STANDARD

CARTON QTY.

FB50I M12 PAR20 bullet flood 50 Incandescent 120 Black N 1 12

FB50IG M12 PAR20 bullet flood 50 Incandescent 120 Green N 1 12

FB50IW M12 PAR20 bullet flood 50 Incandescent 120 White N 1 12







LT60I M12 Tiered pagoda 60 Incandescent 120 Black N 1 12

LT60IG M12 Tiered pagoda 60 Incandescent 120 Green N 1 12

LT60IW M12 Tiered pagoda 60 Incandescent 120 White N 1 12

LFP M6 Landscape post -- -- -- Black -- 2 6

LFPG M6 Landscape post -- -- -- Green -- 2 6

LFPW M6 Landscape post -- -- -- White -- 2 6

6(15.2)

3-1/2(8.9)

3-1/2(8.9)


FB50

7(17.8)

4-5/8(11.7)

4-5/8(11.7)

FB75

8-1/2(21.6)

5-1/2(14.0)

5-1/2(14.0)FB150

6(15.2)

11(27.9)

LT60I

17-1/4(43.8)

5-1/4(13.3)

LFP


PRODUCT INFORMATION

LITHO

NIA

OU

TDO

OR


OP

TION

S & ACCESSO

RIES

Area Lighting

HS – KAD

35-3/4(90.8)

KTMB

Tenon Slipfitters for Arm-Mounted Luminaires

Use with all arm-mounted luminaires. When ordered, fixture must include round pole arm (RPx ) or pole degree aiming arm

(DA12P or DAD12P). To order, locate catalog number from chart below based on tenon size and mounting configuration.

Example: For 3 fixtures at 120°, using a 2-7/8” tenon, catalog number is T25-320. Shipped separately. Order as separate

catalog numbers. For Aeris™ and OMERO™ fixture specify with prefix AS. Example: AS T20-190.

Notes1 Size one housing only.

2 Size two housing only.

3 Only available with FP option.

4 Only available in KVS1 (R2, R3 and R4).

5 Specify family as prefix when ordering as a separate line item.

For arm and/or bracket lengths, see product specification sheet or specific product page in this catalog.

DA12P

6(15.2) 14

(35.5)

DAD12P

5-1/2(14.0)

10-5/8(26.9)

Slipfitter

Set

Tenon

RP09

Tenon 2 fixtures 2 fixtures 3 fixtures 3 fixtures 4 fixtures

OD 1 fixture at 180° at 90° at 120° at 190° at 90°

2-3/8” T20-190 T20-280 T20-290* T20-320* T20-390* T20-490*

2-7/8” T25-190 T25-280 T25-290* T25-320* T25-390* T25-490*

4” T35-190 T35-280 T35-290* T35-320 T35-390* T35-490*

* See product page for size restrictions.

SPx/RPx

VG–KAD

Wall bracket size:

5-1/2” x 7-1/4”

WBx

Mounting bolts (4) by others.

Minimum fastener size is 1/2” diameter.

WBA

NOMENCLATURE DESCRIPTION AS KSE KSF KAD KAC KVE KVR KVS KAR KVF MR MRP

DA12P Degree mounting arm. 30° max. uptilt in 5° increments. Single or twin 180° config. for KVS.

DA12WB Degree arm for wall. 30° max. uptilt in 5° increments. Single or twin 180° config. for KVS.

DAD12P Degree mounting arm. 30° max. uptilt, 5° increments.

DAD12WB Degree arm for wall. 30° max. uptilt, 5° increments.

EHS External house-side shield.

HS House-side shield (consult factory). (Ships separate for KVE R2, R3).

KMA Mast arm mounting for area lighting, 6” min. arm length. Use for 2-3/8" OD pipe. 1

KTMB Twin mounting bar square mounting arms. (EPA=1.1, wt.=41lbs) Mounts on T25 (2-7/8" OD tenon by 5” tall minimum).

MA Master arm for single/twin 180° configuration, internal fitter (Size 3 only).

PT4 Post-top (4” OD open-top pole).

PT45 Post-top (4-1/2” OD open-top pole).

PT5 Post-top (5” OD open-top pole).

PT6 Post-top. Must use with round pole only for KVR (6" OD open-top pole). 2 2

RPx Round pole mounting arm. (14" arm ships separate).

RPF20 Round pole fitter (2-3/8” OD tenon). 2

RPF25 Round pole fitter (2-7/8” OD tenon). 2

MRPF3 4" to 3" O.D. round open-top pole filter.

MRPF5 4" to 5" O.D. round open-top pole filter.

MRPT20 MRP round pole fitter (2-3/8" tenon).



MRPT35 MRP round pole fitter (4" tenon).

SPx Square pole mounting arm. (14" arm ships separate).

SPF20 Square pole fitter (2-3/8” OD tenon). 2

SPF25 Square pole fitter (2-7/8” OD tenon). 2

VG5 Vandal guard. 3 4

WBx Wall mount for J-box. (Aeris™ only order WBA.) (14" ships separate).

WWx Wall for conduit stub. (14" ships separate).

DC_ Deco curved arm.

KMA

HS – KSF

= Available as an option, shipped included = Available as an accessory, shipped separately AREA LIGHTING

EHS-KVF

PRODUCT INFORMATION

LITH

ON

IA O

UTD

OO

R


Bollards & Wall MountedO

PTI

ON

S &

ACC

ESSO

RIE

S

NOMENCLATURE DESCRIPTION ASB ASW KBA KBC KBD KBE KBR KBS KL MRW MRBX TWH TWPTWA/

TWACTWR TWRC TWS WFL

WSR/

WST/

WSQ

BBF Backbox for flat surfaces.

BBR Backbox, recessed (ceiling, soffit mount).

BBW1 Backbox for surface wall installation.

FS Full shield for IES cutoff.

FCV Full cutoff visor.

PC Polycarbonate lens.

R6S/R8S Half-shield, not for use with louvered bollards.

S6S/S8S Half-shield, not for use with louvered bollards.

WG1 Wireguard.

VG1 Vandal guard.

UT5 Uptilt 5 degrees.

DFL Diffusing lens.

WLU Wet location door for up orientation.

IBS Internal backlight shield.

LC90 Lock at 90° for full cutoff.

UCSUplight component shield for WSR, inverted orientation with FTU or

WTU distribution.

HS House-side shield for SR2,SR3 or SR4W (size 2).

KL (Standard) KLBBF KLBBW

TWHWG TWPWGTWHVG TWAWG

Notes1 Specify family prefix.

TWRCFCV ASWHS

ASWxBBW

UT5 5

TOWALL

= Available as an option, shipped included = Available as an accessory, shipped separately

BOLLARDS & WALLMOUNTED LIGHTING

PRODUCT INFORMATION

LITHO

NIA

OU

TDO

OR


OP

TION

S & ACCESSO

RIES

Floodlighting, Garage & Sportslighting

NOM. DESCRIPTIONGARAGE SPORTS FLOODLIGHTING

PGR KPS KACM TSP TV ASF KFL 55 95 170S TFA TFR TFL TFM

HS House-side shield (glare shield).

BDS Bird-deterrent shroud.

OJB Offset junction box.

RMG Recessed mount in grid ceiling.

SS Stainless steel, ceiling-mount housing (alloy 304 stainless steel).

AH Above horizontal aiming.

CF Charcoal filter; must use with heavy-duty shroud.

FCRA1 Crossarm adapter for horizontal mounting (use with yoke mount only).

FCRA451 Crossarm adapter for horizontal mounting 45° (use with yoke mount only). 2

SLR Stainless steel lens rings.

IBL Internal bottom louver; cannot order IBL and TVUV together.

FRWB1 Radius wall bracket; 2-3/8 diameter (use with slipfitter mount only).

FSAB1 Steel angle bracket (use with yoke mount only).

FSPB1 Steel square pole bracket (for use with existing poles). 2-3/8” diameter (use with slipfitter mount only).

FPMB1 Pipe/wood/pole/wall mounting bracket. Mounts to 2” schedule 40 pipe (use with yoke mount only).

FWPB1 Wall bracket (pipe) (use with yoke mount or standard TV mount).

FTS1 Tenon slipfitter; fits 2-3/8” to 2-7/8” OD tenon (use with yoke mount only).

TVTS1 Tenon slipfitter; fits 2-3/8” to 2-7/8” OD tenon.

TFMTS1 Tenon slipfitter for 1/2” threaded knuckle; fits 1-1/4” to 2-3/8” OD tenon. For ground mount only.

TVUV Upper visor; cannot be used with IBL.

FCX21 2-light wood pole crossarm (use with yoke mount or standard TV mount).



YK Yoke mount, painted.

EY Extended yoke.

THK Threaded knuckle mount. (Size 1 only for ASF).

IS Integral slipfitter; fits 2-7/8” max. OD with TFA, 2-3/8” with TFL and TFR.

FRWB FSPB

FSAB

9/16”(1.4)

FWPB

4"(10.2)

1-1/4"(3.2)

4-1/2"(11.4)

FPMB

IS

7"

12"

13"

9/16" Dia.3-3/4"

7"

12"

13"

9/16" Dia.

7"

Notes1 Order as separate catalog number. Must specify finish.2 Ships standard with TSP. Order as separate catalog number for other families.

RMG

FCX2

EPA: 1.4 sq. ft.

Weight: 20 lbs.

EPA: 3.9 sq. ft.

Weight: 56 lbs.

EPA: 4.8 sq. ft.

Weight: 64 lbs.

TFMTS

Pivot slotfor 1/2" bolt

Degree markingsPivot hole for 5/8" bolt(not provided)

5/8" x 1" hex boltand lockwasherfurnished

Floodlightyoke

0000

00

00

00

00

00

4-3/4"(12.1)

1/2" x 1-1/2"hex bolt andflat washerfurnished

(2) 3/8" U-boltsfurnished withnuts andwashers

3-3/8"(8.6)

5/8" x 1" hex bolt andlockwasher furnished

8-3/4"(22.1)

4-1/4"(10.6)

Fits 2" or2-1/2" pipe(horizontalor vertical)

00 0000

Degreemarkings

Pivot hole for5/8" bolt

Pivot slot for 1/2" bolt (not provided)

5/8" x 1" hex bolt and lockwasher furnished

6"(15.2)

1-1/4"(3.2)

Fixtureyoke

4-1/2"(11.4)

(not provided)

FCRA45

4(10.2)

3-1/4(8.3)

4-7/8(12.4)

FTS

lockwasher andnut furnished

20-1/8"(51.1)

12-1/2"(31 .8)

4"(10.2)

11/for

36(91.4)

66(167.6)

96(243.8)

Front view

TFAFront view

TFL, TFR

FCX3

FCX4

5/8” clearance

hole

Furnished with weather-tight

cord grip for 14-3 SO cord (grip

for 12 3 SO optional).

Wire access

7/16” (1.1)

5/8” x 1-1/2” bolt,

lock-washer and nut

furnished

9/16” diameter

holes for lag bolts

(not provided)

11/16”

diameter

hole for 5/8"

thru-bolt

5/8" x 1-1/2" bolt,

lockwasher and nut

furnished

4-3/4” (12.1)

8-1/4” (21.0)

18-5/8”(47.3)3-1/8

2-3/8

1/2-14 NPT

5/16-18 NPT(3 places)

= Available as an option, shipped included = Available as an accessory, shipped separately

FCRA

PRODUCT INFORMATION

LITH

ON

IA O

UTD

OO

R


FloodlightingO

PTI

ON

S &

ACC

ESSO

RIE

S

Notes1 Vandal guards are compatible with all wattages.

2 Specify family as prefix.

BD – Barn doors (KFL and ASF)BV – Bottom visor (KFL) BV – Bottom visor (55/95) FV – Full visor (KFL and ASF) FV – Full visor (55/95)

UV – Upper visor (170)VLV – Vertical louver (KFL) WG – Wireguard (KFL)TFMWG/TFRWGASFGS

TFLWG UV – Upper visor (55/95)TFAUV TFAFVTFAVGTFLFV TFLUV

TFMVG/TFRVG TFMUV/TFRUV TFLVG TFMFV/TFRFVTFAWG UV – Upper visor (KFL)

BVG – Vandal guard (KFL and ASF)HLV – Horizontal louver (KFL) CV – Concentric visor (95) GV – Glare visor (55/95)EV – Eggcrate visor (KFL and ASF)

NOMENCLATURE DESCRIPTION ASF KFL/WFL 55 95 170S TFA TFR TFL TFM

BD2 Barn doors

BV2 Bottom visor

BVG2 Bubble vandal guard

CV2 Concentric visor

EV2 Eggcrate visor (black finish)

FV2 Full visor

FV/BVG2 Full visor and bubble vandal guard

GS2 Glare shield (upper or bottom visor)

GV2 Glare visor

HLV2 Horizontal louver (black finish)

VG1, 2 Vandal guard

UV2 Upper visor

UV/BVG2 Upper visor and bubble vandal guard

VLV2 Vertical louver (black finish)

WG2 Wire guard

= Available as an accessory, shipped separately

FLOODLIGHTING

PRODUCT INFORMATION

LITHO

NIA

OU

TDO

OR


OP

TION

S & ACCESSO

RIES

Floodlighting

Notes1 When used with TFM yoke a 3/8” bolt, two lockwashers and nuts must be

furnished by others.

2 For use with TFMTS.

EWB – Extended wall bracket AFWMA – Wall mount for tenon slipfitter

mounting

AFWMATHK and KFLWMATHK – Wall-mount

arm for threaded knuckle

AFWMPTHK – Wall mounting plate for 3/4”

NPT threaded knuckle

AFTS – Tenon slipfitter for 3/4” NPT threaded

knuckle

AFTMBTHK and KFLTMBTHK – Twin mounting

bar for threaded knuckle

AFTMB – Twin mounting bar for tenon slipfit-

ter mounting

AFSTMTHK and KFLSTMTHK – Stanchion

mount for threaded knuckle

AFSTM – Stanchion mount for tenon slipfitter

mounting

2-3/8"

Wireaccesscover

8"8"

2-3/8" OD

21-5/8" OH

AFTM – Tenon base mount STM – Stanchion mount, general purpose

2-3/8" OD

21-1/2" OH

6" 6"

NOMENCLATURE DESCRIPTION ASF1 ASF2 KFL 55 95 170S TFA TFR TFL TFM

AJB Architectural J-box, accepts 1/2” NPT THK.

AFJB Architectural J-box, accepts ASF1 standard mounting (3/4” NPT THK).

EWB Extended wall bracket, yoke mount only.

AFTMB Twin mounting bar. Requires tenon slipfitter mounting (2-3/8” OD tenon).

AFTMBTHK Twin mounting bar, accepts ASF1 standard mounting (3/4” NPT THK).

KFLTMBTHK Twin mounting bar for THK option. Only compatible with KFLTHK (1/2” NPT).

AFSTM Stanchion mount. Requires tenon slipfitter mounting (2-3/8” OD tenon). 2

AFSTMTHK Stanchion mount, accepts ASF1 standard mounting (3/4” NPT THK).

KFLSTMTHK Stanchion mount, accepts 1/2” NPT THK

AFTM Tenon-base mount. Requires tenon slipfitter mounting (2-3/8” OD tenon). 2

AFWMA Wall-mount arm. Requires tenon slipfitter mounting (2-3/8” OD tenon). 2

AFWMATHK Wall-mount arm, accepts ASF1 standard mounting (3/4” NPT THK).

KFLWMATHK Wall-mount arm, accepts 1/2" NPT THK

AFWMPTHK Wall-mount plate, accepts ASF1 standard mounting (3/4” NPT THK).

TS Tenon slipfitter. Fits 2-3/8” OD tenon (use with 2-1/2" wide yoke only).

AFTS Tenon slipfitter, accepts ASF1 standard mounting (3/4” NPT THK).

STM Stanchion mount – general purpose (2-3/8” OD tenon). 2

= Available as an accessory, shipped separately. Must specify finish.

AFJB and AJB – Architectural

junction box

FLOODLIGHTING

TS – Tenon Slipfilter

PRODUCT INFORMATION

LITH

ON

IA O

UTD

OO

R


Nighttime Friendly LightingN

IGH

TTIM

E FR

IEN

DLY

LIG

HTI

NG

Traditional Forward

Throw Light Reflector

SR4SC - Forward Throw

Notes1 May not meet Nighttime Friendly™ standards with HS option.

2 Will not meet Nighttime Friendly™ standards with DL or EHS options.

AS

KAD

KSE

KVF

LUMINAIREMEETS NIGHTTIME

FRIENDLY™ CRITERIAFULL CUTOFF PSG PAGE COMMENTS

TRESPSS SOLUTIONS:

SHARP CUTOFF OPTICAL SYSTEM

AS 1 520 Aeris™ die-cast housing, dedicated optical platform, 2 housing sizes, flat lens, 400W max. SR4SC

AST 1 520Aeris™ die-cast housing, dedicated optical platform, aesthetically pleasing tension rod assembly,

2 housing sizes, flat lens, 400W max.SR4SC

KAD 534 Square die-cast housing, flat lens, 400W max. SR4SC

KADT 534 Square die-cast housing, aesthetically pleasing tension rod assembly, flat lens, 400W max. SR4SC

KSF 524 Rectangular housing, 3 housing sizes, flat lens, 1000W max. R4SC

KSE 526 Crisp square housing, 2 housing sizes, flat lens, 400W max. R4SC

KVF 2 528 Square vertical lamp, flat lens, 1000W max. SR4SC

KAR 1 531 Round housing, 3 housing sizes, flat lens, 1000W max.

MR 1 521 MR die-cast housing, dedicated optical platform, 2 housing sizes, flat lens, 400W max. SR4SC

MRT 1 521MRT die-cast housing, dedicated optical platform, aesthetically pleasing tension rod assembly, 2

housing sizes, flat lens, 400W max.SR4SC

Lithonia Lighting is a leader in

providing a variety of outdoor

luminaires devoted to energy

and environmental concerns.

Many communities are

interested in maintaining

nighttime visibility, safety

and security while preserving

the night sky. Quality outdoor

lighting considers the visual

needs of the application while

reducing glare and light

trespass onto neighboring

properties, therefore minimiz-

ing sky glow and overall

energy usage. Listed below

are several Lithonia Lighting

product families that include a

wide range of cutoff and full-

cutoff luminaires that produce

quality lighting and minimize

night sky glow.

The Illuminating Engineering

Society of North America

(IESNA, or IES) provides

classifications for luminaires

according to their glare control

and high-angle brightness.

These classifications, along

with their benefits and

limitations, are described

in the Technical and Design

Considerations section on

page 776.

Acuity Brands Lighting

uses Nighttime Friendly™

to identify products that

reduce negative impacts on

the nighttime environment.

Products designated with

the Nighttime Friendly logo

have no uplight, meet the

IESNA definition for full cutoff

optics and reduce high angle

brightness. These measures

of luminaire performance

are consistent with sustain-

ability standards for light

pollution reduction.

For applications where

there is a concern with light

trespass on neighboring

properties, consider products

that limit light behind the

pole, such as the Type 4

sharp cutoff optical system or

house-side shielding.

Spill light or light trespass

is the light that illuminates

surfaces beyond the property

line. An example is the light

on a bedroom wall coming

through the window from the

ball field across the street. A

number of ordinances place

limits on spill light near the

property line as the sole

means of controlling light

trespass. The most effective

way to minimize spill light

from a location is to apply for-

ward throw optics around the

perimeter. Lithonia Lighting’s

optic is designed specifically

for this application.

For more information on sharp cutoff,

visit www.lithonia.com/CutoffLighting/AreaLuminaires.htm.Sharp Cutoff & Light Trespass

AREA LIGHTING

PRODUCT INFORMATION

LITHO

NIA

OU

TDO

OR


NIG

HTTIM

E FRIEN

DLY LIG

HTIN

GNighttime Friendly Lighting

IESNA

The Illuminating Engineering Society of North

America provides a variety of reference material

on effective outdoor lighting design. Both the

IESNA Lighting Handbook, 9th edition, and Recom-

mended Practice No. 33 (RP-33-99), Lighting for

Exterior Environments, offer discussions on design

practices and suggested spill light limitations.

WFL

NEMA

The Luminaire Section of the National Electrical

Manufacturers Association published a document

entitled “White Paper on Outdoor Lighting Code

Issues”. This paper highlights the pros and cons of

methods to control light trespass.

The NEMA Statement of Principles on Outdoor

Lighting Codes also provides general guidance in the

establisement of local lighting ordinances.

IDA

The International Dark-Sky Association is a grass-

roots organization that promotes quality outdoor

lighting practices. Of particular interest to IDA is

the reduction of sky glow. Their guidelines are of

significant benefit for lighting installations near

astronomical observatories or intrinsically dark areas

such as national parks.

Lithonia Lighting has a diverse

selection of wall mounted

luminaires to complement our

various Nighttime Friendly™

area luminaires. Listed below

are several product families

that include a wide range of

cutoff and full-cutoff lumi-

naires that produce quality

lighting and minimize night

sky glow.

Design Recommendations From Industry AssociationsLithonia Lighting is a member of, and participates in the activities of all the associations below.

Notes1 WSR is downlight only.

2 May depend on optical selection. Consult factory.

3 Does not meet Nighttime Friendly™ standards with uplight distribution options.

LUMINAIREMEETS NIGHTTIME

FRIENDLY™ CRITERIAFULL CUTOFF CUTOFF PSG PAGE COMMENTS

ASW 2 542 Aeris™ die-cast housing, architectural style, 2 housing sizes, 400W max.

WSR1,WST, WSQ 3 544 Decorative die-cast housing, 175W max.

WFL 2 546 Architectural style, 2 housing sizes, 400W max., can be ordered with LC90 option to prevent field adjustment.

TWAC 552 Vandal-resistant, polycarbonate lens,100W max.

TWRC 554 General purpose, die-cast aluminum and tempered glass, 400W max., optional full cutoff visor (FCV)

TWR1S 554 General purpose, die-cast aluminum and tempered glass, 175W max.

MRW 2 543 Omero™ die-cast housing, architectural style, 175W max.

WALL MOUNTED LIGHTING

TWR1S

ASW

WST

PRODUCT INFORMATION

LITH

ON

IA O

UTD

OO

R


DES

IGN

GU

IDEL

INES

IES Beamspread Classifications

for general-purpose floodlighting

The IES classification was formerly referred to as NEMA Type.

The following outdoor design tips provide general guidelines for lighting

design. These guidelines may not apply to all applications.

Facade LightingWhen lighting building facades with ground-

mounted floodlights, there are three considerations:

1. Setback

2. Spacing

3. Aiming

Sign LightingWhen lighting a sign with ground-mounted flood-

lights, there are three considerations:

1. Setback

2. Spacing

3. Aiming

1. Setback

The recommended setback is three-fourths the

building height. If a building is 30 feet tall, the rec-

ommended setback is 22.5 feet from the building.

Locating the floodlight closer to the building will

sacrifice uniformity; setting it farther back will result

in a loss of efficiency.

1. Setback

When using ground-mounted floodlights to light a

sign, the recommended setback is a distance equal

to three-fourths the sign height. For example, the

setback distance for a 12-foot by 6-foot sign would

be 4.5 feet. Locating the floodlight closer will sacrifice

uniformity while setting it farther back will result in a

loss of efficiency.

2. Spacing

The rule of thumb for spacing floodlights is not

to exceed two times the setback distance. If the

setback is 22.5 feet, the floodlights should not be

placed more than 45 feet apart.

2. Spacing

The rule of thumb for spacing floodlights is not

to exceed two times the setback distance. If the

setback is 4.5 feet, the floodlights should not be

placed more than 9 feet apart.

3. Aiming

The floodlight should be aimed at least two-thirds

the height of the building. For example, if a building

is 30 feet high, the recommended aiming point

is approximately 20 feet high. After installation is

complete, aiming can be adjusted to produce the

best appearance. Mounting a full or upper visor to the

floodlight can reduce unwanted spill light.

3. Aiming

The floodlight should be aimed at least two-thirds

up the sign. For example, if a sign is 6 feet tall, then

the floodlight will be aimed approximately 4 feet

high. After installation is completed, aiming can be

adjusted to produce the best appearance. Mounting

a full or upper visor to the floodlight can reduce

unwanted glare.

22.5'setback

10'

20'

30'

12'

4-1/2'

6'

4'

2'

45'spacing

22.5'setback

10'

20'

30'

12'

4-1/2'

9'

4-1/2'

6'

4'

2'

20'

3/4building height

10'

20'

30'

45'spacing

12'

4-1/2'

6'

4-1/2'

6'

4'

2'

The IES beam spreads indicate the angular ranges

(horizontally and vertically) through which the

intensity of the floodlight is greater than 10% of its

maximum intensity. This angular range is referred to

as the ‘Field Angle’.

For example:

FIELD ANGLE DEGREES IES TYPE BEAM DESCRIPTION

10° up to 18° 1 Very narrow

18° up to 29° 2 Narrow

29° up to 46° 3 Medium narrow

46° up to 70° 4 Medium

70° up to 100° 5 Medium wide

100° up to 130° 6 Wide130° and up 7 Very wide

Setback distance = 3/4 x building height

3/4 (30 ft.) = 22.5 ft.

Setback distance = 3/4 x sign height

3/4 (6 ft.)= 4.5 ft.

Spacing = 2 x setback distance

2 x 22.5 ft.= 45 ft. apart

Spacing = 2 x setback distance

4.5 ft. x 2 = 9 ft. apart

Aiming point=2/3 x building height

2/3 (30 ft.)=20 ft. high

Aiming point = 2/3 x sign height

2/3 (6 ft.) = 4 ft. high

Asymmetrical beam spread 138° (H) x 119° (V)

Horizontal Vertical = IES 7 X 6

Floodlighting Design Guide

FLOODLIGHTING

PRODUCT INFORMATION

LITHO

NIA

OU

TDO

OR


Floodlighting Design Guide DESIG

N G

UID

ELINES

90°Aimingpoint

Aim

ing

line

Aiming line

Aim at least 30º to avoid glare.

13'

40'

27'

Flag Lighting

When using ground-mounted floodlights to

light flags there are three considerations:

1. Setback

2. Spacing

3. Aiming

Pole Mounted FloodlightsPole-mounted floodlights are commonly used for

general area lighting applications such as parking

lots and storage yards. When using pole-mounted

floodlights, there are four considerations:

1. Mounting height

2. Spacing

3. Vertical aiming

4. Horizontal aiming

1. Setback

The recommended setback for lighting a flag

is one-third times the pole height. If the pole

is 30 feet tall, the floodlight should be set back

a distance of 10 feet away from the pole.

2. Spacing

When more than one pole is added, pole placement

is a concern. The “4 times“ rule of thumb for spacing

indicates that a pole should be placed four times

the mounting height from the adjacent poles. If a

flood is mounted on a 20-foot pole, space the poles

80 feet apart.

1. Mounting Height

The recommended mounting height is one half the

distance across the area to be lighted. If the area

to be lighted is 40 feet across, the lowest recom-

mended mounting height is 20 feet.

2. Spacing

Ideally, three floodlights are recommended to

light a flag. The floodlights should be placed

approximately 120° apart.

3. Vertical Aiming

A single floodlight uses the two-thirds rule of thumb

for vertical aiming. The fixture is aimed two-thirds

of the distance across the area to be lighted and at

least 30° below horizontal. If the area to be lighted

is 40 feet across, the recommended aiming point

is 27 feet.

Additionally, to minimize glare, the recommended

aiming point distance should never exceed twice the

mounting height. If a pole is 20 feet high, the verti-

cal aiming point should not exceed 40 feet out.

2 (20 ft. mtg. ht.) = 40 ft.

3. Aiming

The recommended aiming point for each

floodlight is the center of the flag or the top of

the pole. Mounting a full or upper visor to the

floodlight can reduce unwanted spill light.

4. Horizontal Aiming

When an additional floodlight is added to a single

pole, horizontal aiming also must be considered.

First, each floodlight should be vertically aimed

according to the two-thirds rule. As long as the

floodlight has a horizontal NEMA 6 or 7 beamspread,

the floodlights can be aimed up to 90° apart.

30

10

Aim at least 30º to avoid glare

13'

40'

27'40

20

Setback distance = 1/3 x pole height

1/3 (30 ft.) = 10 ft.

Pole spacing = 4 x mounting height

4 (20-ft. pole) = 80 feet between poles

Aiming point = 2/3 across distance to be lighted

2/3 (40 ft.) = 27 ft. aiming point

Mounting height = 1/2 distance to be lighted

1/2 (40ft.) = 20 ft.

3 floodlights spaced 120° apart

FLOODLIGHTING

PRODUCT INFORMATION

LITH

ON

IA O

UTD

OO

R


PO

LES General Information

All luminaire/pole assemblies require proper evaluation to ensure that

the structural integrity of the assembly is not compromised when applied

in specific wind conditions. Therefore, the basis for pole selection in this

catalog is total weight and effective projected area, EPA (ft2), shown

on the individual pole catalog pages. Determination of maximum EPA

(ft2) and weight loading must include all luminaires, bracketry, signs,

decoration, overhead wire or other equipment that will be mounted to

the subject pole. Luminaire EPA (ft2) and weight data are found on their

respective product pages.

The total effective projected area of the luminaires and brackets

shall not exceed the EPA (ft2) listed for the pole selected at a given

wind velocity. Poles that are to be located in areas of known abnormal

conditions will require special consideration. Please consult factory if

poles are required for Florida Building Code or other special wind load

requirements. The map on page 589 gives the wind velocities to be used

in determining luminaire pole compatibility.

NOTE: If during the pole warranty period of one year, the product proves

defective in material or workmanship, the company shall correct, at its

option, by repairing or replacing at no charge to the purchaser, if the pur-

chaser promptly notifies the company. This warranty specifically excludes

fatigue failure or similar phenomena resulting from induced vibration

harmonic oscillation or resonance associated with the movement of air

currents around the product.

(Poles are available only in U.S.)

Notes1 Finish must be specified (poles do NOT ship DDB as standard).

2 Additional architectural colors available; see pages 796-799 or see Achitectural Colors brochure on www.lithonia.com.

3 Aluminum poles only.

4 SSA, SSCA, RSA, RTA, RTAU, RSAH, SSAH only.

5 Must include original order number.

Pole Selection Procedure

Step 1. Select the luminaire and decide how many will be mounted per pole. Determine the effective

projected area, EPA (ft2), which is given on the dimensional information table.

Step 2. Determine the appropriate mounting method for the luminaire. Options include arm, bracket or

wall mounting.

Step 3. Add together the EPAs (ft2) of the luminaire and arm/bracket. Multiply by number of fixtures to

be mounted on one pole.

Step 4. Consult the wind map on page 589 to determine the basic wind velocity for your area.

Step 5. Select the material (steel or aluminum) and shape (square or round) of the pole. Refer to the

“Technical Information” chart on the appropriate pole page.

A. Find the desired nominal mounting height in the second column.

B. Verify that the fixture weight does not exceed the maximum weight listed for the desired pole.

C. Compare your total EPA (ft2) loading with the maximum EPA (ft2) value found in the wind

speed column for your area. Check that the equipment you are using will not exceed this value.

D. If both the weight and EPA (ft2) values do not exceed the value for which the pole is rated,

you have selected the correct pole. If, however, either one of those numbers exceeds the

maximum rated values, compare the EPA (ft2) and fixture weight loads to the next larger

pole of the same mounting height.

NOTES: “Call Before Number” and complete pole description MUST be included before order can be processed. Bolt templates will be shipped

with anchor bolts. To pre-ship templates, place an order for the appropriate template number.

CAUTION: This pole selection process is a guideline only. Lithonia Lighting assumes no responsibility for selection and recommends consulta-

tion with qualified individuals for verification of luminaire/pole assembly selection.

Shaft typeNominal mounting height

Nominal shaft base size/Wall thickness Fixture mounting method Options Finish1

SSS Square straight steel

RSS Round straight steel

STS Square tapered steel

RTS Round tapered steel

RTSU Round tapered steel with arm(s)

STSH Square tapered steel hinged

SPRTS Round tapered steel sportslighting

SSA Square straight aluminum

SSCA Square straight aluminum, cruciform

RSA Round straight aluminum

RTA Round tapered aluminum

RTAU Round tapered aluminum with arm(s)

RSAH Round straight aluminum hinged

SSAH Square straight aluminum hinged

RTF Round tapered fiberglass

RTFDB Round tapered fiberglass direct burial

SSF Square straight fiberglass

STC Square tapered concrete

SPRTC Round tapered concrete sportslighting

SSWDB Square straight wood direct burial

8-50'; sportslighting poles up to 115’.

See submittal sheets for

specific information.

Nominal shaft base size

Wall thickness

3 B 0.120"

4 C 0.125"

5 E 0.156"

6 G 0.188"

7 J 0.250"

8 K 0.312"

9 L 0.219"

10 P 0.375"

PT Open-top

Tenon mounting

T20 2-3/8” OD (2” NPS)

T25 2-7/8” OD (2-1/2” NPS)

T30 3-1/2” OD (3” NPS)

T35 4” OD (3-1/2” NPS)

Drill mounting

DM19 1 at 90°

DM28 2 at 180°

DM29 2 at 90°

DM39 3 at 90°

DM49 4 at 90°

DM32 3 at 120° (round poles)

Aeris drill mounting

DM19AS 1 at 90°

DM28AS 2 at 180°

DM29AS 2 at 90°

DM39AS 3 at 90°

DM49AS 4 at 90°

DM32AS 3 at 120° (round poles)

See pages 612-613

MAEX Match existing5

Architectural colors2 Polyester powder

Standard colors

DDB Dark bronze

DWH White

DBL Black

DMB Medium bronze


BA Brushed aluminum3

Classic colors

DSS Sandstone

DGC Charcoal gray

DTG Tennis green

DBR Bright red

DSB Steel blue

Class 1 architectural anodized4

ABL Black

ADB Dark bronze

ANA Natural

ORDERING INFORMATION Example: SSA 16 4G DM19 DMB


Lead times will vary depending on options selected. Consult with your sales representative.

POLES

PRODUCT INFORMATION

LITHO

NIA

OU

TDO

OR


General Information PO

LES

WIN

D M

AP

LITH

ON

IA O

UTD

OO

R


PO

LES Steel

SSSSquare Straight Steel

Intended Use

Square straight steel general

purpose pole for up to 39-

foot mounting heights.

Construction

Shaft: Weldable grade, hot-

rolled, commercial-quality

carbon steel tubing with a

minimum yield of 55,000

psi (11-gauge) or 50,000

psi (7-gauge). Uniform wall

thickness of .125" or .188".

Shaft is one piece with a

full-length longitudinal high-

frequency electric resistance

weld. Uniformly square

in cross-section with flat

sides, small corner radii and

excellent torsional qualities.

Available shaft widths are 4,

5 and 6 inches.

Anchor base: Fabricated

from hot-rolled carbon steel

plate conforming to ASTM

A36 that meets or exceeds a

minimum-yield strength of

36,000 psi. Base plate and

shaft are circumferentially

welded top and bottom.

Anchor bolts: Fabricated

from carbon steel bar with


55,000 psi. Bolts have an "L"

bend on lower end and are

galvanized a minimum of 12

inches on the threaded end

per ASTM A-153. Each anchor

bolt is furnished with two hex

nuts and two flat washers.

Grounding: Provision located

inside hand hole rim. Ground-

ing hardware is not included

(provided by others).

Hand hole: Reinforced hand-

hole rim having nominal

dimensions of 3" x 5" for all

shafts. Includes steel cover

with attachment screws.

Hardware: All fasteners are

high-strength, galvanized or

zinc-plated or stainless steel.

Top cap: Removable top

cap provided with drill-

mount poles.

Base cover: Includes full-base

cover finished to match pole.

Finish: Must specify finish.

ADDITIONAL INFORMATION For ordering information, see page 588. For additional product information, visit www.lithonia.com.

TECHNICAL INFORMATION - EPA (FT2) WITH 1.3 GUST

CATALOG NUMBER

NOM. MOUNT. HT.

(FT.)

POLE SHAFT SIZE (IN. X FT.)

WALL THICK. (IN.)

GAUGE80

MPHMAX. WT.

90 MPH

MAX. WT.

100 MPH

MAX. WT.

BOLT CIRCLE

(IN.)

BOLT SIZE (IN. X IN. X IN.)

APPROX. SHIP WT.

(LBS.)SSS 10 4C 10 4 x 10 0.125 11 30.6 765 23.8 595 18.9 473 8 - 9 3/4 x 18 x 3 75SSS 12 4C 12 4 x 12 0.125 11 24.4 610 18.8 470 14.8 370 8 - 9 3/4 x 18 x 3 90SSS 14 4C 14 4 x 14 0.125 11 19.9 498 15.1 378 11.7 293 8 - 9 3/4 x 18 x 3 100SSS 16 4C 16 4 x 16 0.125 11 15.9 398 11.8 295 8.9 223 8 - 9 3/4 x 18 x 3 115SSS 18 4C 18 4 x 18 0.125 11 12.6 315 9.2 230 6.7 168 8 - 9 3/4 x 18 x 3 125SSS 20 4C 20 4 x 20 0.125 11 9.6 240 6.7 167 4.5 150 8 - 9 3/4 x 18 x 3 140SSS 20 4G 20 4 x 20 0.188 7 14.0 350 11.0 275 8.0 200 8 - 9 3/4 x 30 x 3 198SSS 20 5C 20 5 x 20 0.125 11 17.7 443 12.7 343 9.4 235 10 - 12 1 x 36 x 4 185SSS 20 5G 20 5 x 20 0.188 7 28.1 703 21.4 535 16.2 405 10 - 12 1 x 36 x 4 265SSS 25 4C 25 4 x 25 0.125 11 4.8 150 2.6 100 1.0 50 8 - 9 3/4 x 18 x 3 170SSS 25 4G 25 4 x 25 0.188 7 10.8 270 7.7 188 5.4 135 8 - 9 3/4 x 30 x 3 245SSS 25 5C 25 5 x 25 0.125 11 9.8 245 6.3 157 3.7 150 10 - 12 1 x 36 x 4 225SSS 25 5G 25 5 x 25 0.188 7 18.5 463 13.3 333 9.5 238 10 - 12 1 x 36 x 4 360SSS 30 4G 30 4 x 30 0.188 7 6.0 150 4.0 100 2.5 75 8 - 9 3/4 x 30 x 3 295SSS 30 5C 30 5 x 30 0.125 11 4.7 150 2.0 50 - - 10 - 12 1 x 36 x 4 265SSS 30 5G 30 5 x 30 0.188 7 10.7 267 6.7 167 3.9 100 10 - 12 1 x 36 x 4 380SSS 30 6G 30 6 x 30 0.188 7 19.0 475 13.2 330 9.0 225 11 - 13 1 x 36 x 4 520SSS 35 5G 35 5 x 35 0.188 7 5.9 150 2.5 100 - - 10 - 12 1 x 36 x 4 440SSS 35 6G 35 6 x 35 0.188 7 12.4 310 7.6 190 4.2 105 11 - 13 1 x 36 x 4 540SSS 39 6G 39 6 x 39 0.188 7 7.2 180 3.0 75 - - 11 - 13 1 x 36 x 4 605

INSTALLATION NOTES: Factory-supplied templates must be used when setting anchor bolts. Lithonia Lighting will not accept claim for incorrect anchorage placement due to failure to use Lithonia Lighting factory templates. Do not erect poles without having fixtures installed. If poles are stored outside, all protective wrapping must be removed immediately upon delivery to prevent finish damage.

A

C

B

Notes

side drilling.

POLE DATA

SHAFT BASE SIZE

BOLT CIRCLE A

BOLT PROJECTION

B

BASE SQUARE

CTEMPLATE DESCRIPTION

ANCHOR BOLT DESCRIPTION

ANCHOR BOLT AND TEMPLATE DESCRIPTION

4"C 8.5" 2.75" - 4.00" 8" ABTEMPLATE PJ50004 AB18-0 ABSSS-4C4"G 8.5" 2.75" - 4.00" 8" ABTEMPLATE PJ50004 AB30-0 ABSSS-4G5" 10" - 12" 3.375" - 4.00" 11" ABTEMPLATE PJ50010 AB36-0 ABSSS-56" 11" - 13" 3.375" - 4.00" 12.5" ABTEMPLATE PJ50011 AB36-0 NA

18”

PRODUCT INFORMATION

LITHO

NIA

OU

TDO

OR


PO

LESSteel

RSSRound Straight Steel

Intended Use

Round straight steel general



Construction

Shaft: Weldable grade, hot


carbon steel tubing with

minimum yield of 42,000 psi.

Uniform wall thickness of

.120". Shaft is one piece with

a full-length, longitudinal,

high-frequency electric resis-

tance weld. Uniformly round

in cross-section down length

of shaft with no taper.

Anchor base: Fabricated from

hot-rolled carbon steel plate

with 3/4" thickness conform-

ing to ASTM A36. Base plate

and shaft are circumferen-

tially welded top and bottom.















Hand hole: Reinforced hand-

hole rim located 18" above

base. Includes cover with

attachment screws.

Hardware: All fasteners are

high-strength galvanized or




mount poles.





POLE DATA

SHAFT BASE SIZE

BOLT CIRCLE A

BOLT PROJECTION B

BASE SQUARE C

TEMPLATE DESCRIPTION

ANCHOR BOLT

DESCRIPTION3" 8" 3.25" - 3.50" 8" ABTEMPLATE PJ50041 AB18-04" 8" 3.25" - 3.50" 8" ABTEMPLATE PJ50041 AB18-0

4.5" 8" 3.25" - 3.50" 8" ABTEMPLATE PJ50041 AB18-05" 8" 3.25" - 3.50" 8" ABTEMPLATE PJ50041 AB18-0

A

C

B


CATALOG NUMBER

NOM. MOUNT. HT. (FT.)


WALL THICK.

(IN.)

80 MPH

MAX. WT.

90 MPH

MAX. WT.

100 MPH

MAX. WT.

BOLT CIRCLE

(IN.)

BOLT SIZE (IN. X IN. X

IN.)

APPROX. SHIP WT.

(LBS.)RSS 8 4-5B 8 4.5 x 8 0.120 24.7 630 19.7 495 16.0 430 8 3/4 x 18 x 3 55RSS 10 3B 10 3 x 10 0.120 10 250 7.7 190 6.0 175 8 3/4 x 18 x 3 55RSS 10 4B 10 4 x 10 0.120 19.1 480 15.0 375 12.2 305 8 3/4 x 18 x 3 70

RSS 10 4-5B 10 4.5 x 10 0.120 24.5 615 19.5 490 15.8 395 8 3/4 x 18 x 3 75RSS 12 3B 12 3 x 12 0.120 7.7 195 5.8 145 4.4 130 8 3/4 x 18 x 3 60RSS 12 4B 12 4 x 12 0.120 15.0 390 11.8 300 9.5 240 8 3/4 x 18 x 3 80


RSS 14 4-5B 14 4.5 x 14 0.120 16.2 405 12.8 320 10.3 260 8 3/4 x 18 x 3 95RSS 15 4-5B 15 4.5 x 15 0.120 12.0 300 9.5 250 7.5 200 8 3/4 x 18 x 3 96

RSS 16 3B 16 3 x 16 0.120 4.6 125 3.2 100 2.3 60 8 3/4 x 18 x 3 80RSS 16 4B 16 4 x 16 0.120 9.6 250 7.4 185 5.9 150 8 3/4 x 18 x 3 100


RSS 18 4-5B 18 4.5 x 18 0.120 10.5 265 8.2 210 6.5 165 8 3/4 x 18 x 3 115RSS 20 3B 20 3 x 20 0.120 2.4 100 1.4 75 - - 8 3/4 x 18 x 3 100RSS 20 4B 20 4 x 20 0.120 6.0 150 4.45 150 3.45 125 8 3/4 x 18 x 3 120

RSS 20 4-5B 20 4.5 x 20 0.120 8.5 215 6.6 165 5.2 130 8 3/4 x 18 x 3 130RSS 20 5B 20 5 x 20 0.120 11.75 300 9.1 230 7.25 180 8 3/4 x 18 x 3 145

RSS 22 4-5B 22 4.5 x 22 0.120 6.0 150 4.5 125 3.75 100 8 3/4 x 18 x 3 134RSS 25 4B 25 4 x 25 0.120 2.85 100 1.95 75 1.35 75 8 3/4 x 18 x 3 145

RSS 25 4-5B 25 4.5 x 25 0.120 4.8 130 3.6 90 2.7 90 8 3/4 x 18 x 3 145RSS 25 5B 25 5 x 25 0.120 7.25 180 5.5 150 4.25 150 8 3/4 x 18 x 3 180

RSS 30 4-5B 30 4.5 x 30 0.120 2.3 80 1.5 75 1.0 60 8 3/4 x 18 x 3 185RSS 30 5B 30 5 x 30 0.120 4.2 150 3 125 2.25 100 8 3/4 x 18 x 3 210

INSTALLATION NOTES: Factory-supplied templates must be used when setting anchor bolts. Lithonia Lighting will not accept claim for incorrect anchorage placement due to failure to use Lithonia Lighting factory templates. Do not erect poles without having fixtures installed. If poles are stored outside, all protective wrapping must be removed immediately upon delivery to prevent finish damage. Notes

side drilling.

18"

PRODUCT INFORMATION

LITH

ON

IA O

UTD

OO

R


SteelP

OLE

S

STSSquare Tapered Steel

Intended Use

Square tapered steel general



Construction

Shaft: Weldable-grade

(ASTM A-595 Grade A) hot-

rolled commercial-quality



psi. Uniform wall thickness

of 11-gauge (0.1196") or

7-gauge (0.1793"). Shaft is

one piece with a full-length

longitudinal high-frequency

resistance weld and is square

in cross-section having flat

sides, radiused corners and

a uniform taper of approxi-

mately .11" per foot.























Hand hole: Rectangular, rein-

forced hand-hole rim having

nominal dimensions of 3" x

5" for shafts less than 6.375"

square and oval shaped 4"

x 6.5" for all other shafts.

Steel cover with attachment

screws included. Hand hole is

located 18" above base.

Hardware: Fasteners are





mount poles.

Base cover: Includes full base





CATALOG NUMBER


POLE SHAFT SIZE (BASE IN. X

TOP IN. X FT.)

WALL THICK.

(IN.)GAUGE

80 MPH

MAX. WT.

90 MPH

MAX. WT.

100 MPH

MAX. WT.

BOLT CIRCLE

(IN.)


IN.)

APPROX SHIP WT.

(LBS.)STS 20 5-2B 20 5.25 x 3.05 x 20 0.125 11 18.0 452 13.8 345 10.7 268 10.75 1 x 36 x 4 155STS 20 5-5F 20 5.50 x 3.30 x 20 0.188 7 30.5 764 24.0 602 19.0 477 11 1 x 36 x 4 235STS 25 6-0B 25 6.00 x 3.25 x 25 0.125 11 16.8 422 12.6 315 9.5 238 12 1 x 36 x 4 205STS 25 6-4F 25 6.41 x 3.66 x 25 0.188 7 28.5 713 22.5 563 18.2 455 12.5 1 x 36 x 4 310STS 30 6-4B 30 6.41 x 3.11 x 30 0.125 11 13.6 340 9.8 245 7.0 175 12.5 1 x 36 x 4 260STS 30 6-4F 30 6.41 x 3.11 x 30 0.188 7 23.6 590 17.9 448 13.7 343 12.5 1 x 36 x 4 375STS 35 6-8B 35 6.81 x 2.96 x 35 0.125 11 10.7 269 7.3 184 4.8 120 13 1 x 36 x 4 305STS 35 7-1F 35 7.13 x 3.28 x 35 0.188 7 23.4 585 17.4 435 13.0 325 13.5 1 x 36 x 4 475STS 39 7-1B 39 7.18 x 2.92 x 39 0.125 11 8.6 215 5.4 135 3.0 75 13.5 1 x 36 x 4 345STS 39 7-1F 39 7.13 x 2.87 x 39 0.188 7 19.3 483 14.2 355 10.4 260 13.5 1 x 36 x 4 500STS 45 7-8F 45 7.88 x 2.93 x 45 0.188 7 16.0 400 11.1 278 7.4 187 14.5 1 x 36 x 4 620STS 45 8-7F 45 8.75 x 3.80 x 45 0.188 7 23.5 588 16.6 415 11.4 287 15.75 1-1/4 x 42 x 6 730STS 50 8-8F 50 8.81 x 3.31 x 50 0.188 7 19.4 485 13.2 332 8.7 218 16 1-1/4 x 42 x 6 780

18”

A

C

B

Notes

side drilling.

POLE DATA

SHAFT BASE SIZE

BOLT CIRCLE

A

BOLT PROJECTION

B

BASE SQUARE



5.2" B 10.75" 3.50"-4.25" 10.75" ABTEMPLATE PJ50095 AB36-05.5" F 11" 3.75"-4.50" 11" ABTEMPLATE PJ50096 AB36-06.0" B 12" 3.50"-4.25" 11.5" ABTEMPLATE PJ50097 AB36-06.4" F 12.5" 4.00"-4.75" 11.875" ABTEMPLATE PJ50098 AB36-06.4" B 12.5" 3.50"-4.25" 11.875" ABTEMPLATE PJ50099 AB36-06.8" B 13" 3.50"-4.25" 12.25" ABTEMPLATE PJ50101 AB36-07.1" F 13.5" 4.25"-5.00" 12.625" ABTEMPLATE PJ50102 AB36-07.1" B 13.5" 3.50"-4.25" 12.625" ABTEMPLATE PJ50103 AB36-07.8" F 14.5" 4.00"-4.75" 13.375" ABTEMPLATE PJ50105 AB36-08.7" F 15.75" 4.75"-5.50" 14.25" ABTEMPLATE PJ50106 AB42-08.8" F 16" 4.50"-5.25" 15.5" ABTEMPLATE PJ50107 AB42-0


PRODUCT INFORMATION

LITHO

NIA

OU

TDO

OR


PO

LESSteel

RTSRound Tapered Steel

Intended Use

Round tapered steel general



Construction


(ASTM A-595 Grade A), hot-





of 11-gauge (0.1196") or

7-gauge (0.1793"). Shafts are

one piece construction with


high-frequency resistance

weld. Round in cross-section,

having uniform taper of ap-

proximately .14" per foot.























Hand hole: Rectangular,

reinforced hand-hole rim

having nominal dimensions

of 3" x 5" for 5.9" shafts and

oval-shaped 4" x 6.5" hand

hole for all other shafts.









mount poles.

Bolt cover: Bolt covers are

zinc diecast and fasten to

shaft by a 0.25" stainless

steel, self-tapping, hex-head

screw. Full base cover avail-

able as option.




CATALOG NUMBER


POLE SHAFT SIZE (BASE IN. X TOP IN. X FT.)

WALL THICK.

(IN.)GAUGE

80 MPH

MAX. WT.

90 MPH

MAX. WT.

100 MPH

MAX. WT.

BOLT CIRCLE

(IN.)


IN.)

APPROX. SHIP WT.

(LBS.)RTS 20 5-9B 20 5.9 x 3.1 x 20 0.125 11 19.3 482 15.1 377 12.2 305 9.0 1 x 36 x 4 140RTS 20 6-5B 20 6.5 x 3.7 x 20 0.125 11 24.2 605 19.3 482 15.6 390 9.5 1 x 36 x 4 160RTS 25 5-9B 25 5.9 x 2.4 x 25 0.125 11 12.5 312 9.9 247 8 200 9.0 1 x 36 x 4 155RTS 25 7-0B 25 7.0 x 3.5 x 25 0.125 11 20.3 507 16.2 405 13.1 327 10.0 1 x 36 x 4 200RTS 25 7-0F 25 7.0 x 3.5 x 25 0.188 7 30.5 760 24.0 625 19.8 495 10.0 1 x 36 x 4 280RTS 30 6-6B 30 6.6 x 2.4 x 30 0.125 11 11.7 292 9.3 232 7.5 187 9.5 1 x 36 x 4 200RTS 30 8-0B 30 8.0 x 3.8 x 30 0.125 11 18.9 473 14.9 373 12 300 11.0 1 x 36 x 4 265RTS 30 8-0F 30 8.0 x 3.8 x 30 0.188 7 33.5 838 27.0 675 22.0 550 11.0 1-1/4 x 42 x 6 380RTS 35 7-3B 35 7.3 x 2.4 x 35 0.125 11 11.2 280 8.9 222 7.1 177 10.5 1 x 36 x 4 250RTS 35 8-5B 35 8.5 x 3.6 x 35 0.125 11 18.9 472 15.1 377 12.2 305 11.5 1 x 36 x 4 315RTS 35 9-5B 35 9.5 x 4.6 x 35 0.125 11 23.2 580 18.2 455 14.5 363 13.0 1 x 36 x 4 370RTS 39 7-8B 39 7.8 x 2.4 x 39 0.125 11 10.7 267 8.5 212 6.6 165 11.0 1 x 36 x 4 285RTS 39 9-0B 39 9.0 x 3.6 x 39 0.125 11 17.2 430 13.5 338 10.8 270 12.5 1 x 36 x 4 355RTS 39 9-0F 39 9.0 x 3.6 x 39 0.188 7 28.5 715 23.0 575 19.0 475 12.5 1-1/4 x 42 x 6 515

RTS 45 10-0B 45 10.0 x 3.7 x 45 0.125 11 17.4 435 13.5 338 10.6 265 13.5 1 x 36 x 4 450RTS 45 10-0F 45 10.0 x 3.7 x 45 0.188 7 28.5 715 23.0 575 19.0 475 13.5 1-1/4 x 42 x 6 650RTS 50 10-0B 50 10.0 x 3.0 x 50 0.125 11 13.2 330 10.6 265 8.3 208 13.5 1 x 36 x 4 475RTS 50 10-0F 50 10.0 x 3.0 x 50 0.188 7 20.5 512 16.5 412 13.6 340 13.5 1¼ x 42 x 6 680

A

C

Notes

side drilling.

POLE DATA

SHAFT BASE SIZE

BOLT CIRCLE A

BOLT PROJECTION

B

BASE SQUARE



5.9" B 9" 3.50" - 4.25" 10" ABTEMPLATE PJ50075 AB36-06.5" B 9.5" 3.50" - 4.25" 10.5" ABTEMPLATE PJ50074 AB36-07.0" B 10" 3.50" - 4.25" 10.875" ABTEMPLATE PJ50077 AB36-07.0" F 10" 3.75" - 4.50" 10.875" ABTEMPLATE PJ50076 AB36-06.6" B 9.5" 3.50" - 4.25" 10.5" ABTEMPLATE PJ50078 AB36-08.0" B 11" 3.50" - 4.25" 11.5" ABTEMPLATE PJ50079 AB36-08.0" F 11" 4.50" - 5.25" 11.5" ABTEMPLATE PJ50080 AB42-07.3" B 10.5" 3.50" - 4.25" 11.25" ABTEMPLATE PJ50081 AB36-08.5" B 11.5" 3.75" - 4.50" 12" ABTEMPLATE PJ50082 AB36-09.5" B 13" 3.75" - 4.50" 13" ABTEMPLATE PJ50083 AB36-07.8" B 11" 3.75" - 4.50" 11.5" ABTEMPLATE PJ50084 AB36-09.0" B 12.5" 3.75" - 4.50" 12.375" ABTEMPLATE PJ50085 AB36-09.0" F 12.5" 4.50" - 5.25" 12.375" ABTEMPLATE PJ50086 AB42-0

10.0" B 13.5" 3.75" - 4.50" 14" ABTEMPLATE PJ50087 AB36-010.0" F 13.5" 4.50" - 5.25" 14" ABTEMPLATE PJ50088 AB42-0


B

PRODUCT INFORMATION

LITH

ON

IA O

UTD

OO

R


SteelP

OLE

S

RTSURound Tapered Steel with Upsweep Mast Arms

Intended Use

Round tapered steel roadway

pole with upsweep mast

arm(s) for up to 40-foot

mounting heights including

rise of arm.

Construction


(ASTM A-595 Grade A), hot-





of 11-gauge (0.1196") or

7-gauge (0.1793"). Shafts are

one-piece construction with


high-frequency resistance

weld. Round in cross-section,

having uniform taper of ap-

proximately .14" per foot.

Arm: Body is 2-3/8 " O.D.

(2" NPS, Schedule 40)

galvanized steel tube with

minimum yield strength of

36,000 psi. Welding follows

AWS standards. Arms are

galvanized and/or painted af-

ter fabrication. Arm mounts

to shaft via 1/2" steel bolt

Simplex mount.























Hand hole: Rectangular,


having nominal dimensions

of 3" x 5" for 5.9" shafts and

oval-shaped 4" x 6.5" hand

hole for all other shafts.








cap provided.

Bolt cover: Bolt covers are

zinc diecast and fasten to

shaft by a 0.25" stainless

steel, self-tapping, hex-head

screw. Full base cover avail-

able as option.



POLE DATA

SHAFT BASE SIZE

BOLT CIRCLEA

BOLT PROJECTIONB

BASE SQUARE

CTEMPLATE

DESCRIPTIONANCHOR BOLT DESCRIPTION

5.9' 9" 3.50" - 4.25" 10" ABTEMPLATE PJ50075 AB36-06.5" 9.5" 3.50" - 4.25" 10.5" ABTEMPLATE PJ50074 AB36-07.0" 10" 3.50" - 4.25" 10.875" ABTEMPLATE PJ50077 AB36-07.3" 10.5" 3.50" - 4.25" 11.25" ABTEMPLATE PJ50133 AB36-07.5" 10.5" 3.50" - 4.25" 11.25" ABTEMPLATE PJ50133 AB36-08.0" 11" 3.50" - 4.25" 11.5" ABTEMPLATE PJ50079 AB36-08.5" 11.5" 3.75" - 4.50" 12" ABTEMPLATE PJ50082 AB36-09.0" 12.5" 3.75" - 4.50" 12.375" ABTEMPLATE PJ50085 AB36-09.5" 13" 4.00" - 4.50" 13" ABTEMPLATE PJ50134 AB36-0

10.0" 13.5" 4.00" - 4.50" 14" ABTEMPLATE PJ50135 AB36-010.5" 14" 4.50" - 5.00" 14.5" ABTEMPLATE PJ50136 AB42-0

A

C

Notes

plus rise of upsweep arm.

added, consult factory.

consult factory.

TECHNICAL INFORMATION

CATALOG NUMBERNOM.

MOUNT. HT. (FT.)

MTG. ARM LENGTH

(FT.)

POLE SHAFT BASE

DIA. (IN.)

WALL THICK.

(IN.)

EPA FT2 W/1.3 GUST UP TO 100 MPH (PER ARM)

MAX. WT. PER ARM

(LBS.)

BOLT CIRCLE

(IN.)


APPROX. SHIP WT.

(LBS.)

SINGLE-ARM

POLES

RTSU 20 5-9B SMP US4 20 4 5.9 0.120 2 76 9.0 1 x 36 x 4 140RTSU 20 5-9B SMP US6 20 6 5.9 0.120 2 76 9.0 1 x 36 x 4 140RTSU 20 5-9B SMP US8 20 8 5.9 0.120 2 76 9.0 1 x 36 x 4 140RTSU 25 5-9B SMP US4 25 4 5.9 0.120 2 76 9.0 1 x 36 x 4 205RTSU 25 5-9B SMP US6 25 6 5.9 0.120 2 76 9.0 1 x 36 x 4 205RTSU 25 5-9B SMP US8 25 8 5.9 0.120 2 76 9.0 1 x 36 x 4 205RTSU 30 6-6B SMP US4 30 4 6.5 0.120 2 76 9.5 1 x 36 x 4 250RTSU 30 6-6B SMP US6 30 6 6.5 0.120 2 76 9.5 1 x 36 x 4 250RTSU 30 6-6B SMP US8 30 8 6.5 0.120 2 76 9.5 1 x 36 x 4 250RTSU 35 7-3B SMP US4 35 4 7.3 0.120 2 76 10.5 1 x 36 x 4 300RTSU 35 7-3B SMP US6 35 6 7.3 0.120 2 76 10.5 1 x 36 x 4 300RTSU 35 7-3B SMP US8 35 8 7.3 0.120 2 76 10.5 1 x 36 x 4 300RTSU 40 9-0B SMP US4 40 4 9 0.120 2 76 12.5 1 x 36 x 4 405RTSU 40 9-0B SMP US6 40 6 9 0.120 2 76 12.5 1 x 36 x 4 405RTSU 40 9-0B SMP US8 40 8 9 0.120 2 76 12.5 1 x 36 x 4 405

DOUBLE-ARM

POLES

RTSU 20 5-9B SMP 2US4 20 4 5.9 0.120 2 76 9.0 1 x 36 x 4 240RTSU 20 5-9B SMP 2US6 20 6 5.9 0.120 2 76 9.0 1 x 36 x 4 240RTSU 20 5-9B SMP 2US8 20 8 5.9 0.120 2 76 9.0 1 x 36 x 4 240RTSU 25 5-9B SMP 2US4 25 4 5.9 0.120 2 76 9.0 1 x 36 x 4 255RTSU 25 5-9B SMP 2US6 25 6 5.9 0.120 2 76 9.0 1 x 36 x 4 255RTSU 25 5-9B SMP 2US8 25 8 5.9 0.120 2 76 9.0 1 x 36 x 4 255RTSU 30 6-6B SMP 2US4 30 4 6.5 0.120 2 76 9.5 1 x 36 x 4 300RTSU 30 6-6B SMP 2US6 30 6 6.5 0.120 2 76 9.5 1 x 36 x 4 300RTSU 30 6-6B SMP 2US8 30 8 6.5 0.120 2 76 9.5 1 x 36 x 4 300RTSU 35 7-3B SMP 2US4 35 4 7.3 0.120 2 76 10.5 1 x 36 x 4 350RTSU 35 7-3B SMP 2US6 35 6 7.3 0.120 2 76 10.5 1 x 36 x 4 350RTSU 35 7-3B SMP 2US8 35 8 7.3 0.120 2 76 10.5 1 x 36 x 4 350RTSU 40 9-0B SMP 2US4 40 4 9 0.120 2 76 12.5 1 x 36 x 4 455RTSU 40 9-0B SMP 2US6 40 6 9 0.120 2 76 12.5 1 x 36 x 4 455RTSU 40 9-0B SMP 2US8 40 8 9 0.120 2 76 12.5 1 x 36 x 4 455


B

PRODUCT INFORMATION

LITHO

NIA

OU

TDO

OR


PO

LESSteel

STSHSquare Tapered Steel, Hinged

Intended Use

Square tapered steel hinged

pole with 20- to 39-foot

mounting heights. Good ap-

plication where maintenance

access is limited.

Construction

Shaft: Weldable-grade,

hot-rolled, commercial-

quality carbon steel having

a guaranteed minimum

yield strength of 55,000 psi

and is supplied in 11-gauge

(.1196") or 7-gauge (.1793")

nominal thickness. Pole is



high-frequency, electric-

resistance weld. Shaft is

square in cross-section

having flat sides, radi used

corners, and uniform taper of

approximately 0.11 inches per

foot (4-inch square poles are

not tapered).

Hinge: Hinge pin is stainless

steel. A flexible wiring guide

is provided, passing through

the hinge area for wiring

protection. Hinge is external.























Hand hole: Rectangular, rein-

forced hand-hole rim having

nominal dimensions of 3" x 5"

for 4" shafts and oval shaped

4" x 6.5" for all other shafts.









mount poles.






CATALOG NUMBER

NOM. MOUNT. HT.

(FT.)

POLE SHAFT SIZE (BASE IN. X TOP IN. X FT.)

WALL THICK.

(IN.)GAUGE 80 MPH MAX. WT. 90 MPH MAX. WT. 100 MPH MAX. WT.

BOLT CIRCLE (IN.)


IN.)

APPROX. SHIP WT.

(LBS)STSH 20 4F 20 4 x 4 x 20 0.188 7 11.6 217 8.5 217 6.2 217 8.5 - 10 3/4 x 18 x 3 300STSH 25 4F 25 4 x 4 x 25 0.188 7 7.1 160 4.8 160 3.1 160 8.5 - 10 3/4 x 18 x 3 370

STSH 25 6-4B 25 6.41 x 3.63 x 25 0.125 11 18.0 254 13.0 254 9.3 254 12.5 1 x 36 x 4 355STSH 30 4F 30 4 x 4 x 30 0.188 7 4.0 120 2.1 120 0.8 120 8.5 - 10 3/4 x 18 x 3 435

STSH 30 6-4B 30 6.41 x 3.08 x 30 0.125 11 12.5 230 8.3 230 5.1 230 12.5 1 x 36 x 4 440STSH 35 7-1B 35 7.18 x 2.88 x 35 0.125 11 7.1 160 3.2 160 - - 13.5 1 x 36 x 4 540STSH 35 7-1F 35 7.13 x 2.87 x 35 0.188 7 22.0 155 16.9 155 12.1 155 13.5 1 x 36 x 4 700STSH 39 7-1F 39 7.13 x 2.87 x 39 0.188 7 19.5 110 13.5 110 9.2 110 13.5 1 x 36 x 4 740

POLE DATASHAFT

BASE SIZEBOLT CIRCLE

ABOLT PROJECTION

BBASE SQUARE

CTEMPLATE


4.0" F 8.5" - 10" 3.50" - 4.25" 9.75" ABTEMPLATE PJ50091 AB18-06.4" B 12.5" 3.75" - 4.50" 11.875" ABTEMPLATE PJ50092 AB36-07.1" B 13.5" 3.50" - 4.25" 12.625" ABTEMPLATE PJ50094 AB36-07.1" F 13.5" 4.00" - 4.75" 12.625" ABTEMPLATE PJ50093 AB36-0

Removable

Winch detail (accessory)

A

Boltslots

C

B

Notes

WINCH ORDERINGWINCH NOMENCLATURE SHAFT SIZE

STSHWCH 4F 4FSTSHWCH 6-4B 6-4BSTSHWCH 7-1B 7-1BSTSHWCH 7-1F 7-1F

External hinge detail

Hinge pin

ShroudWiringprotection

Bottom

Top assembly


PRODUCT INFORMATION

LITH

ON

IA O

UTD

OO

R


SteelP

OLE

S

SPRTSRound Tapered Steel Sportlighting

Intended Use

Round tapered steel sports

lighting pole with 40- to

80-foot mounting heights.

60 foot and longer are two

section poles.

Construction

Shaft: Pole shaft sections

are high-strength low-alloy

steel conforming to ASTM

A572 Grade 65 or ASTM

A595 Grade A. Cross-section

is round or 16-sided with a

4" bend radius. Each pole is

a constant tapered hollow

steel section up to 55 feet in

length with a minimum 1-1/2

times diameter slip joint as

standard for two section pole.

Shaft plate is single thickness

without laminations.



plate that conforms to ASTM

A36 or ASTM A572 Grade

42. Base plate and shaft are

circumferentially welded top

and bottom.


















Hand hole: Oval shaped,


having a nominal dimension

of 4" x 6.5". Steel cover with

attachment screws included.

Hand hole is located 18"

above base.


cap provided with all drill-

mount poles.



TECHNICAL INFORMATIONBOTTOM SECTION TOP SECTION EPA (FT2) WITH 1.3 GUST

CATALOG NUMBER

NOM. MOUNT. HT.

(FT.)

BASE DIA. (IN.)

WALL THICK.

(IN.)

BASE DIA. (IN.)

WALL THICK.

(IN.)

80 MPH.

MAX. WT. 90 MPH.MAX. WT.

100 MPH. MAX. WT.BOLT

CIRCLE (IN.)


IN.)

# OF ANCHOR

BOLTS

APPROX. SHIP WT.

(LBS.)SPRTS 40 HT01 40 9 0.1193 - - 17.2 430 13.5 338 10.8 270 12.5 1 x 36 x 4 4 366SPRTS 40 HT02 40 9 0.1793 - - 26.1 654 20.6 517 16.7 419 12.5 1-1/4 x 42 x 6 4 514SPRTS 40 HT03 40 10 0.1793 - - 38.6 965 30.6 765 24.6 615 13.5 1-1/4 x 42 x 6 4 604SPRTS 50 HT01 50 10 0.1193 - - 13.2 330 10.6 265 8.3 208 13.5 1 x 36 x 4 4 486SPRTS 50 HT02 50 10 0.1793 - - 20.5 512 16.5 412 13.6 340 13.5 1-1/4 x 42 x 6 4 684SPRTS 50 HT03 50 11 0.1793 - - 29.9 748 23.5 588 18.6 465 15 1-1/4 x 42 x 6 4 813SPRTS 50 HT04 50 13 0.1793 - - 50.4 1,260 39.7 992 31.4 785 17 1-1/2 x 54 x 6 4 1024SPRTS 50 HT05 50 13 0.2391 - - 69.2 1,730 55.0 1,375 44.2 1,105 17.5 1-3/4 x 84 x 6 4 1339SPRTS 60 HT01 60 11.5 0.1793 5 0.1196 20.0 600 16.0 480 13.0 390 16 1-1/4 x 42 x 6 4 907SPRTS 60 HT02 60 13 0.1793 6.5 0.1196 36.0 1,080 29.0 870 22.0 660 17 1-1/4 x 42 x 6 6 1110SPRTS 60 HT03 60 13 0.2391 6.6 0.1793 49.0 1,470 40.0 1,200 32.0 960 17 1-1/2 x 54 x 6 6 1467SPRTS 60 HT04 60 15.87 0.1875 12 0.1793 78.0 2,340 62.0 1,860 50.0 1,500 21 1-1/2 x 54 x 6 6 1651SPRTS 70 HT01 70 13 0.1793 6.6 0.1793 20.6 515 16.7 417 13.7 342 17 1-1/2 x 54 x 6 4 1228SPRTS 70 HT02 70 13 0.2391 6.6 0.1793 23.8 595 19.3 482 15.9 397 17.5 1-3/4 x 84 x 6 4 1547SPRTS 70 HT03 70 14.57 0.1875 12 0.1793 39.0 1,170 30.0 900 23.0 690 19 1-1/4 x 42 x 6 6 1597SPRTS 70 HT04 70 15.87 0.1875 12 0.1793 52.0 1,560 41.0 1,230 33.0 990 21 1-1/2 x 54 x 6 6 1801SPRTS 70 HT05 70 16.82 0.1875 12 0.1793 65.0 1,950 53.0 1,590 42.0 1,260 22.75 1-1/2 x 54 x 6 6 1984SPRTS 80 HT01 80 15.87 0.1875 12 0.1793 37.0 1,110 29.0 870 23.0 690 21 1-1/2 x 54 x 6 6 1899SPRTS 80 HT02 80 16.82 0.1875 12 0.1793 45.0 1,350 36.0 1,080 28.0 840 22.75 1-1/2 x 54 x 6 6 2137SPRTS 80 HT03 80 17.53 0.2092 13 0.1875 58.0 1,740 46.0 1,380 35.0 1,050 23 1-1/2 x 54 x 6 6 2350SPRTS 80 HT04 80 18.7 0.1875 12 0.1793 70.0 2,100 56.0 1,680 44.0 1,320 23 1-1/2 x 54 x 6 8 2447

Notes

18"


4-bolt

Hand holeA

D B

C

Hand holeA

D B

C

8-bolt

Hand holeA

D B

C

6-bolt

PRODUCT INFORMATION

LITHO

NIA

OU

TDO

OR


PO

LES

ACR3, 3-Fixture Angle Arm

3.0"

3'6"

1'-5"8"

1.75"

2.0"

1'-5"


CR4, 4-Fixture Crossarm

10'-0"

3'-0"

3" Sched40 pipe


7'-0"

3'-0"

3" Sched40 pipe


7'-0"

3'-0"

3" Sched40 pipe

Projected area is for the crossarm only. The crossarm projected area is added to the luminaire projected area to get a total effective projected area (EPA).

2.6"

10'-6"

4'-11"8"

1.75"

2.0"

4'-11"


2.6"

8'-0"

2'-5"8"

1.75"

2.0"

2'-5"


30”3”

30”

69-3/16”

32”

32”

30”

156”

30” 30”


NotesAngle iron crossarms can be used with other poles if ordered with the pole.

CATALOG

NUMBER

ARM EPA

(SQ. FT.)

WEIGHT

(LBS.)

ACR2 1.98 34.0

ACR3 3.12 54.0

ACR4 4.53 78.0

ACR5 5.95 103.0

ACR6 7.37 127.0

Projected area is for the crossarm only. The crossarm projected area is added to the luminaire projected area to get a total effective projected area (EPA).


22'-0"

3'-0"3" Sched 40 pipe


13'-0"

3'-0" 3" Sched 40 pipe


16'-0"



19'-0"


NotesTubular crosswarms can be used with other poles if ordered with the pole.

CATALOG

NUMBER

ARM EPA

(SQ. FT.)

WEIGHT

(LBS.)

ACR2 1.28 44.0

ACR3 2.45 65.0

ACR4 3.21 98.0

ACR5 4.17 116.0

ACR6 5.13 150.0

ACR7 6.10 176.0

ACR8 7.06 271.0

Options & Accessories

TUBULAR CROSSARMS FOR STEEL POLES

PRODUCT INFORMATION

Intended Use

For use on SPRTS sportslighting poles.

Intended Use

For use on SPRTS sportslighting poles.

5'-6"8" 25"

17-3/8"

25"

30"3"

30"

Options & Accessories

ANGLE IRON CROSSARMS FOR STEEL POLES

PRODUCT INFORMATION

LITH

ON

IA O

UTD

OO

R


PO

LES Aluminum

SSASquare Straight Aluminum

Intended Use

Square straight aluminum

general purpose pole for up

to 35-foot mounting heights.

Construction

Shaft: Made from extruded

6063-T6 or 6061-T6 alumi-

num alloy, square tube is

uniform in cross-section

down length of shaft with

no taper.

Anchor base: Cast from

A356 aluminum alloy and

heat treated to T6 temper.

Base plate and shaft are

circumferentially welded

top and bottom. Anchor bolt

holes are recessed and are

covered by tamper-resistant

aluminum nut-cover discs















Hand hole: Reinforced rect-

angular hand hole is located

18" above base. 4" poles have

2" x 4" hand hole; 5" and 6"

poles have 2.5" x 4" hand

hole. Hand-hole cover plate

made from aluminum alloy

Hardware: Stainless steel.



mount poles.

Bolt covers: Nut-cover discs

provided.




CATALOG NUMBER



WALL THICK.

(IN.)

80 MPH

90 MPH

100 MPH

MAX. WT.

BOLT CIRCLE

(IN.)


APPROX. SHIP WT.

(LBS.)SSA 8 4C 8 4 x 8 0.125 16.5 12.6 9.9 300 8.5 - 9.625 3/4 x 18 x 3 32

SSA 10 4C 10 4x 10 0.125 11.5 8.6 6.5 230 8.5 - 9.625 3/4 x 18 x 3 37SSA 12 4C 12 4 x 12 0.125 12.4 9.2 6.9 160 8.5 - 9.625 3/4 x 18 x 3 40SSA 14 4C 14 4 x 14 0.125 9.3 6.7 4.8 120 8.5 - 9.625 3/4 x 18 x 3 50SSA 15 4C 15 4 x 15 0.125 8.0 5.6 3.9 100 8.5 - 9.625 3/4 x 18 x 3 52SSA 16 4C 16 4 x 16 0.125 6.9 4.7 3.1 90 8.5 - 9.625 3/4 x 18 x 3 54SSA 16 4G 16 4 x 16 0.188 11.8 8.5 6.2 130 8.5 - 9.625 3/4 x 30 x 3 74SSA 16 5G 16 5 x 16 0.188 15.0 11.1 7.5 280 10.5 - 11.5 3/4 x 30 x 3 83SSA 18 4C 18 4 x 18 0.125 4.9 3.0 1.7 70 8.5 - 9.625 3/4 x 18 x 3 57SSA 18 4G 18 4 x 18 0.188 9.2 6.4 4.4 100 8.5 - 9.625 3/4 x 30 x 3 80SSA 18 5G 18 5 x 18 0.188 16.8 12.2 8.9 230 10.5 - 11.5 3/4 x 30 x 3 91SSA 20 4C 20 4 x 20 0.125 3.3 1.7 0.5 40 8.5 - 9.625 3/4 x 18 x 3 62SSA 20 4G 20 4 x 20 0.188 7.0 4.6 2.9 80 8.5 - 9.625 3/4 x 30 x 3 85SSA 20 5G 20 5 x 20 0.188 13.6 9.5 6.6 180 10.5 - 11.5 3/4 x 30 x 3 107SSA 20 6G 20 6 x 20 0.188 22.0 15.9 11.6 230 12 - 13 1 x 36 x 4 155SSA 20 6J 20 6 x 20 0.250 30.4 22.6 17.0 300 12 - 13 1 x 36 x 4 202SSA 25 5G 25 5 x 25 0.188 7.2 4.2 2.0 110 10.5 - 11.5 3/4 x 30 x 3 130SSA 25 6G 25 6 x 25 0.188 13.2 8.6 5.4 180 12 - 13 1 x 36 x 4 180SSA 25 6J 25 6 x 25 0.250 19.7 13.8 9.5 250 12 - 13 1 x 36 x 4 224SSA 30 6G 30 6 x 30 0.188 7.0 3.4 0.8 130 12 - 13 1 x 36 x 4 210SSA 30 6J 30 6 x 30 0.250 12.2 7.5 4.1 170 12 - 13 1 x 36 x 4 258SSA 32 6J 32 6 x 32 0.250 9.7 5.4 2.3 160 12 - 13 1 x 36 x 4 272SSA 35 6J 35 6 x 35 0.250 6.4 2.6 - 200 12 - 13 1 x 36 x 4 294SSA 35 7J 35 6.75 x 35 0.250 7.6 3.1 - 150 14.625 1 x 36 x 4 290

POLE DATA

SHAFT BASE SIZE

BOLT CIRCLE

A

BOLT PROJECTION

B

BASE SQUARE



4"C 8.5" - 9.625" 3.125" 9.938" ABTEMPLATE PJ50045 AB18-04"G 8.5" - 9.625" 3.125" 9.938" ABTEMPLATE PJ50045 AB30-05" 10.5" - 11.5" 3.25" 11.563" ABTEMPLATE PJ50046 AB30-06" 12" - 13" 4" 12.25" ABTEMPLATE PJ50044 AB36-07" 14.625" 4.125" 15" ABTEMPLATE PJ50130 AB36-0

Nut cover disc

Tapped 3/8”for ground connector

18"

A

C

B

Notes


PRODUCT INFORMATION

LITHO

NIA

OU

TDO

OR


PO

LESAluminumAluminum

SSCASquare Straight Cruciform Aluminum

Intended Use

Square straight cruciform

pole for up to 30-foot mount-

ing heights.

Construction


seamless 6000 series alloy

aluminum tubing, square

cruciform tube is uniform in

cross-section down length of

shaft with no taper.





circumferentially welded

top and bottom. Anchor bolt

holes are recessed and are

covered by tamper-resistant

aluminum nut-cover discs.















Hand hole: Reinforced rect-

angular hand hole is located

18" above base. 2" x 4" hand-

hole cover plate made from

aluminum alloy.




mount poles.

Bolt covers: Nut cover discs

provided.



TECHNICAL INFORMATION- EPA (FT2) WITH 1.3 GUST

CATALOG NUMBER



WALL THICK.

(IN.)

80 MPH

90 MPH

100 MPH

MAX. WT. (IN. X IN.

X IN.)

APPROX. BOLT CIRCLE

(IN.)BOLT SIZE

SHIP WT. (LBS.)

SSCA 8 4G 8 4 x 8 0.188 30.2 23.5 18.6 350 8.5 - 9.625 3/4 x 18 x 4 45SSCA 10 4G 10 4 x 10 0.188 23.5 18 14.1 260 8.5 - 9.625 3/4 x 18 x 4 50SSCA 12 4G 12 4 x 12 0.188 18.4 13.9 10.7 260 8.5 - 9.625 3/4 x 18 x 4 56SSCA 15 4G 15 4 x 15 0.188 10.6 7.7 5.6 200 8.5 - 9.625 3/4 x 18 x 4 67SSCA 18 4G 18 4 x 18 0.188 7.2 4.9 3.2 200 8.5 - 9.625 3/4 x 18 x 4 77SSCA 18 6G 18 6 x 18 0.188 21.7 15.9 11.7 260 12 - 13 1 x 36 x 4 139SSCA 20 4G 20 4 x 20 0.188 5.8 3.6 2 100 8.5 - 9.625 3/4 x 18 x 4 84SSCA 20 6G 20 6 x 20 0.188 18.3 13 9.2 150 12 - 13 1 x 36 x 4 149SSCA 25 6G 25 6 x 25 0.188 11 6.8 3.7 150 12 - 13 1 x 36 x 4 175SSCA 30 6G 30 6 x 30 0.188 4.5 1.4 - 260 12 - 13 1 x 36 x 4 201


POLE DATA

SHAFT BASE SIZE

BOLT CIRCLE

A

BOLT PROJECTION

B

BASE SQUARE

CTEMPLATE


4" 8.5" - 9.625" 3.125" 9.938" ABTEMPLATE PJ50131 AB18-06" 12" - 13" 4" 12.75" ABTEMPLATE PJ50132 AB36-0

Notes

B

PRODUCT INFORMATION

LITH

ON

IA O

UTD

OO

R


AluminumP

OLE

S

RSARound Straight Aluminum

18”

Intended Use

Round straight aluminum



Construction

Shaft: One-piece extruded

6063-T6 aluminum alloy with

T6 temper. Circumferential

satin-brushed finish. Round

straight tube is uniform in



Anchor base: Cast from A356

aluminum alloy and heat

treated to T6 temper. Base

plate and shaft are circum-

ferentially welded top and

bottom. The anchor base is

provided with slotted holes.















Hand hole: Reinforced 2" x

4" hand hole is located 18"

above base. (4.5" and 5"

poles have either 2" x 4" or 3"

x 5" hand hole; 6" poles have

a 3" x 5" hand hole). Cover

and attachment hardware

furnished.




mount poles.

Bolt covers: A356 bolt covers

included with anchor base

unless otherwise specified.




NUMBER OF BOLTS

CATALOG NUMBER



WALL THICK.

(IN.)

80 MPH

90 MPH

100 MPH

MAX. WT.

BOLT CIRCLE (IN.)


IN.)

APPROX. SHIP WT.

(LBS.)

4-BOLT BASE

RSA 8 4C 8 4 x 8 0.125 11.2 8.6 6.8 125 6.5 - 8.25 3/4 x 18 x 3 22RSA 10 4C 10 4 x 10 0.125 8.2 6.1 4.7 100 6.5 - 8.25 3/4 x 18 x 3 26RSA 12 4C 12 4 x 12 0.125 6.0 4.3 3.2 110 6.5 - 8.25 3/4 x 18 x 3 30

RSA 12 4-5C 12 4.5 x 12 0.125 8.1 6.0 4.8 80 7.125 - 8.375 3/4 x 18 x 3 38RSA 14 4C 14 4 x 14 0.125 4.1 2.8 1.9 75 6.5 - 8.25 3/4 x 18 x 3 35

RSA 14 4-5C 14 4.5 x 14 0.125 5.8 4.2 3.3 60 7.125 - 8.375 3/4 x 18 x 3 42RSA 14 5C 14 5 x 14 0.125 7.8 6.0 4.7 100 7.5 - 9.5 3/4 x 18 x 3 39RSA 16 4C 16 4 x 16 0.125 2.8 1.6 1.0 150 6.5 - 8.5 3/4 x 18 x 3 38

RSA 16 4-5C 16 4.5 x 16 0.125 4.2 2.8 2.1 50 7.125 - 8.375 3/4 x 18 x 3 46RSA 16 4-5G 16 4.5 x 16 0.188 7.5 5.5 4.3 155 7.125 - 8.375 3/4 x 18 x 3 62

RSA 16 5C 16 5 x 16 0.125 5.9 4.4 3.4 175 7.5 - 9.5 3/4 x 18 x 3 46RSA 16 5E 16 5 x 16 0.156 8.0 6.1 4.8 190 7.5 - 9.5 3/4 x 18 x 3 53

RSA 18 4-5G 18 4.5 x 18 0.188 5.7 4.0 3.1 123 7.125 - 8.375 3/4 x 18 x 3 68RSA 18 5C 18 5 x 18 0.125 4.3 3.1 2.4 150 7.5 - 9.5 3/4 x 18 x 3 48RSA 18 5E 18 5 x 18 0.156 6.1 4.6 3.5 175 7.5 - 9.5 3/4 x 18 x 3 58RSA 18 5G 18 5 x 18 0.188 8.0 6.8 4.7 225 7.5 - 9.5 3/4 x 18 x 3 68

RSA 20 4-5G 20 4.5 x 20 0.188 4.3 2.9 2.1 95 7.125 - 8.375 3/4 x 18 x 3 74RSA 20 5C 20 5 x 20 0.125 3.0 2.1 1.5 150 7.5 - 9.5 3/4 x 18 x 3 54RSA 20 5E 20 5 x 20 0.156 4.7 3.4 2.6 150 7.5 - 9.5 3/4 x 18 x 3 68RSA 20 5G 20 5.x 20 0.188 6.4 4.8 3.6 150 7.5 - 9.5 3/4 x 18 x 3 82RSA 20 6E 20 6.x 20 0.156 9.3 7.1 5.5 175 8.75 - 10.25 3/4 x 30 x 3 95

RSA 25 4-5G 25 4.5 x 25 0.188 1.3 - - 100 7.125 - 8.375 3/4 x 18 x 3 89RSA 25 6E 25 6 x 25 0.156 5.2 3.8 2.8 150 8.75 - 10.25 3/4 x 30 x 3 108RSA 25 6G 25 6.x 25 0.188 7.1 5.3 4.0 150 8.75 - 10.25 3/4 x 30 x 3 128RSA 30 6G 30 6 x 30 0.188 3.5 2.4 1.6 200 8.75 - 10.25 3/4 x 30 x 3 146

3-BOLT BASE

3RSA 8 3C 8 3 x 8 0.125 5.8 4.3 3.3 75 5.5 - 7 3/4 x 18 x 3 223RSA 10 3C 10 3 x 10 0.125 4.0 2.9 2.1 75 5.5 - 7 3/4 x 18 x 3 263RSA 10 4C 10 4 x 10 0.125 8.2 6.1 4.7 75 6.3125 - 7.375 3/4 x 18 x 3 263RSA 12 3C 12 3 x 12 0.125 2.7 1.8 1.2 75 5.5 - 7 3/4 x 18 x 3 303RSA 12 4C 12 4 x 12 0.125 5.8 4.2 3.1 150 6.3125 - 7.375 3/4 x 18 x 3 303RSA 12 5C 12 5 x 12 0.125 10.3 8 6.3 150 7.375 - 8.5 3/4 x 18 x 3 363RSA 14 3C 14 14 x 3 0.125 1.7 1.0 0 75 5.5 - 7 3/4 x 18 x 3 353RSA 14 4C 14 14 x 4 0.125 4.1 2.8 1.9 150 6.3125 - 7.375 3/4 x 18 x 3 353RSA 14 5C 14 14 x 5 0.125 7.9 6.0 4.7 150 7.375 - 8.5 3/4 x 18 x 3 393RSA 16 4C 16 4 x 16 0.125 2.8 1.6 1.0 150 6.3125 - 7.375 3/4 x 18 x 3 383RSA 16 5E 16 5 x 16 0.156 8.0 6.1 4.8 150 7.375 - 8.5 3/4 x 18 x 3 533RSA 18 5C 18 5 x 18 0.125 4.3 3.1 2.4 150 7.375 - 8.5 3/4 x 18 x 3 483RSA 20 5C 20 5 x 20 0.125 2.9 2.0 1.4 150 7.375 - 8.5 3/4 x 18 x 3 543RSA 20 5E 20 5 x 20 0.156 4.6 3.3 2.5 150 7.375 - 8.5 3/4 x 18 x 3 68


C

A

C

A

Notes

is located on opposite side of drilling. For special drillings, consult factory.

POLE DATA

NUMBER OF BOLTS

SHAFT BASE SIZE

BOLT CIRCLE

A

BOLT PROJECTION

BBASE SQUARE

CTEMPLATE


4-BOLT BASE

4" 6.5" - 8.25" 3.25" 8.75" ABTEMPLATE PJ50057 AB18-04.5" 7" - 8.5" 3.25" 8.5" ABTEMPLATE PJ50040 AB18-05" 7.5" - 9.5" 3.25" 9.25" ABTEMPLATE PJ50058 AB18-06" 8.75" - 10.25" 3.50" 10.25" ABTEMPLATE PJ50059 AB30-0

3-BOLT BASE

3" 5.5" - 7" 3.25" 7.5" ABTEMPLATE PJ50125 AB18-04" 6.3125" - 7.375" 3.25" 8.875" ABTEMPLATE PJ50126 AB18-05" 7.375" - 8.5" 3.25" 10.25" ABTEMPLATE PJ50127 AB18-0

B

PRODUCT INFORMATION

LITHO

NIA

OU

TDO

OR


PO

LESAluminum

RSAORound Straight Aluminum withOMEROTM Decorative Base Cover

RSALPRound Straight Aluminum with

Low-Profile Base Cover

Intended Use




Construction













and bottom. RSAO: Base plate

bolt circle is 7.5". RSALP: The

anchor base is provided with

slotted holes.









bolt is furnished with hex nut,

washer and leveling shims.





Hand hole: Reinforced 2"x 5"

hand hole is located 18" above

base. Cover and attachment

hardware furnished.




mount poles.

RSAO: Decorative base. Made

of die-cast aluminum the

decorative base slides over

the pole, matching a key slot

in the pole baseplate allow-

ing a reveal between the

baseplate and the decorative

base cover. The decorative

base cover is 17.5" tall which

is combined with the height

of the matching baseplate for

a total height of 20.25".

RSALP: Low-profile base

cover. Made of die-cast alu-

minum, the base slides over

the pole fitting over the pole,

baseplate for a smooth one-

piece design. The base cover

is 5" tall with a step contour

3-1/2" above the base.




NUMBER OF BOLTS

CATALOG NUMBER



WALL THICK.

(IN.)

80 MPH

90 MPH

100 MPH

MAX. WT.

BOLT CIRCLE

(IN.)


IN.)

APPROX. SHIP WT.

(LBS.)

RSAO4-BOLT BASE

RSAO 8 4C 8 4 x 8 0.125 11.2 8.6 6.8 125 7.5 3/4 x 18 x 3 22RSAO 10 4C 10 4 x 10 0.125 8.2 6.1 4.7 100 7.5 3/4 x 18 x 3 26RSAO 12 4C 12 4 x 12 0.125 6.0 4.3 3.2 110 7.5 3/4 x 18 x 3 30

RSAO 12 4-5C 12 4.5 x 12 0.125 8.1 6.0 4.8 80 7.5 3/4 x 18 x 3 38RSAO 14 4C 14 4 x 14 0.125 4.1 2.8 1.9 75 7.5 3/4 x 18 x 3 35

RSAO 14 4-5C 14 4.5 x 14 0.125 5.8 4.2 3.3 60 7.5 3/4 x 18 x 3 42RSAO 14 5C 14 5 x 14 0.125 7.8 6.0 4.7 100 7.5 3/4 x 18 x 3 39RSAO 16 4C 16 4 x 16 0.125 2.8 1.6 1.0 150 7.5 3/4 x 18 x 3 38

RSAO 16 4-5C 16 4.5 x 16 0.125 4.2 2.8 2.1 50 7.5 3/4 x 18 x 3 46RSAO 16 5C 16 5 x 16 0.125 5.9 4.4 3.4 175 7.5 - 9.5 3/4 x 18 x 3 46

RSAO 18 4-5G 18 4.5 x 18 0.188 5.7 4.0 3.1 123 7.125 - 8.375 3/4 x 18 x 3 68RSAO 18 5C 18 5 x 18 0.125 4.3 3.1 2.4 150 7.5 - 9.5 3/4 x 18 x 3 48

RSAO 20 4-5G 20 4.5 x 20 0.188 4.3 2.9 2.1 95 7.125 - 8.375 3/4 x 18 x 3 74RSAO 20 5C 20 5 x 20 0.125 3.0 2.1 1.5 150 7.5 - 9.5 3/4 x 18 x 3 54

RSALP4-BOLT BASE

RSALP 8 4C 8 4 x 8 0.125 11.2 8.6 6.8 125 6.5 - 8.25 3/4 x 18 x 3 22RSALP 10 4C 10 4 x 10 0.125 8.2 6.1 4.7 100 7.125 - 8.375 3/4 x 18 x 3 26RSALP 12 4C 12 4 x 12 0.125 6.0 4.3 3.2 110 6.5 - 8.25 3/4 x 18 x 3 30

RSALP 12 4-5C 12 4.5 x 12 0.125 8.1 6.0 4.8 80 7.125 - 8.375 3/4 x 18 x 3 38RSALP 14 4C 14 4 x 14 0.125 4.1 2.8 1.9 75 7.5 - 9.5 3/4 x 18 x 3 35

RSALP 14 4-5C 14 4.5 x 14 0.125 5.8 4.2 3.3 60 6.5 - 8.5 3/4 x 18 x 3 42RSALP 14 5C 14 5 x 14 0.125 7.8 6.0 4.7 100 7.125 - 8.375 3/4 x 18 x 3 39RSALP 16 4C 16 4 x 16 0.125 2.8 1.6 1.0 150 7.125 - 8.375 3/4 x 18 x 3 38

RSALP 16 4-5C 16 4.5 x 16 0.125 4.2 2.8 2.1 50 7.5 - 9.5 3/4 x 18 x 3 46RSALP 16 5C 16 5 x 16 0.125 5.9 4.4 3.4 175 7.5 - 9.5 3/4 x 18 x 3 46

RSALP 18 4-5G 18 4.5 x 18 0.188 5.7 4.0 3.1 123 7.125 - 8.375 3/4 x 18 x 3 68RSALP 18 5C 18 5 x 18 0.125 4.3 3.1 2.4 150 7.5 - 9.5 3/4 x 18 x 3 48

RSALP 20 4-5G 20 4.5 x 20 0.188 4.3 2.9 2.1 95 7.125 - 8.375 3/4 x 18 x 3 74RSALP 20 5C 20 5 x 20 0.125 3.0 2.1 1.5 150 7.5 - 9.5 3/4 x 18 x 3 54


RSAO Base Cover RSALP Base Cover

A

C

Notes

side drilling.

POLE DATA

NUMBER OF BOLTS

SHAFT BASE SIZE

BOLT CIRCLE

A

BOLT PROJECTION

B

BASE

CTEMPLATE


RSAO4-BOLT BASE

4" 7.5" 3.25" 13" ABTEMPLATE PJ50070 AB18-04.5" 7.5" 3.25" 8.5" ABTEMPLATE PJ50070 AB18-05" 7.5" 3.25" 9.25" ABTEMPLATE PJ50070 AB18-0

RSALP4-BOLT BASE

4" 6.5" - 8.25" 3.25" 8.75" ABTEMPLATE PJ50057 AB18-04.5" 7" - 8.5" 3.25" 8.5" ABTEMPLATE PJ50040 AB18-05" 7.5" - 8" 3.25" 7.5" ABTEMPLATE PJ50071 AB18-0

B

PRODUCT INFORMATION

LITH

ON

IA O

UTD

OO

R


PO

LES Aluminum

RTARound Tapered Aluminum

Intended Use

Round tapered aluminum



Construction

Shaft: The shaft is spun

tapered from seamless

6063 alloy aluminum tubing

and heat treated to a T6

temper. Circumferential


in cross-section down length

of shaft and cone tapered to

the butt diameter.






and bottom.















Hand hole: A nominal 3" x

5" or 4" x 6" reinforced flush

covered hand hole is centered

18" above the base.




mount poles.







NUMBEROF BOLTS

CATALOG NUMBER

NOM. MOUNT HT. (FT.)


TOP IN. X FT.)

WALL THICKNESS

(IN.)

80 MPH

90 MPH

100 MPH

MAX. WT.

BOLT CIRCLE (IN.)


APPROX SHIP WT.

(LBS.)

4-BOLT BASE

RTA 20 5C 20 5 x 3 x 19.66 0.125 3.9 2.5 1.6 100 7.5 - 9.5 3/4 x18 x 3 62RTA 20 5G 20 5 x 3 x 19.66 0.188 7.4 5.2 3.8 100 7.5 - 9.5 3/4 x 18 x 3 72RTA 20 6G 20 6 x 4 x 19.66 0.188 12.2 9.2 7.2 214 9 - 10 3/4 x 30 x 3 107RTA 20 7E 20 7 x 4 x 19.66 0.156 15.0 11.4 9.0 256 9.875 - 11.25 1 x 36 x 4 103RTA 25 6E 25 6 x 4 x 24.66 0.156 5.3 3.6 2.6 114 9 - 10 3/4 x 30 x 3 106RTA 25 7E 25 7 x 4 x 24.66 0.156 9.5 7.0 5.4 162 9.875 - 11.25 1 x 36 x 4 120RTA 25 8E 25 8 x 4.5 x 24.66 0.156 14.2 10.9 8.5 220 11 - 12 1 x 36 x 4 130RTA 25 8G 25 8 x 4.5 x 24.66 0.188 18.0 13.8 10.9 261 11 - 12 1 x 36 x 4 153RTA 30 7E 30 7 x 4 x 29.66 0.156 5.5 3.8 2.7 111 9.875 - 11.25 1 x 36 x 4 135RTA 30 8E 30 8 x 4.5 x 29.66 0.156 9.4 7.0 5.3 151 11 - 12 1 x 36 x 4 150RTA 30 8G 30 8 x 4.5 x 29.66 0.188 12.4 9.4 7.3 179 11 - 12 1 x 36 x 4 175

RTA 30 10G 30 10 x 6 x 29.66 0.188 23.8 18.3 14.3 377 14.25 - 16.25 1 x 40 x 4 235RTA 35 8E 35 8 x 4.5 x 34.66 0.156 5.8 4.1 2.9 119 11 - 12 1 x 36 x 4 185RTA 35 8G 35 8 x 4.5 x 34.66 0.188 8.3 6.0 4.5 141 11 - 12 1 x 36 x 4 220RTA 35 8J 35 8 x 4.5 x 34.66 0.250 12.9 9.7 7.5 183 11 - 12 1 x 36 x 4 251

RTA 35 10G 35 10 x 6 x 34.66 0.188 17.9 13.6 10.4 295 14.25 - 16.25 1 x 40 x 4 268RTA 39 8G 39 8 x 4.5 x 38.66 0.188 5.6 3.9 2.7 122 11 - 12 1 x 36 x 4 250RTA 39 8J 39 8 x 4.5 x 38.66 0.250 9.7 7.1 5.4 158 11 - 12 1 x 36 x 4 280

RTA 39 10G 39 10 x 6 x 38.66 0.188 14.2 10.5 7.8 253 14.25 - 16.25 1 x 40 x 4 295RTA 39 10J 39 10 x 6 x 38.66 0.250 20.4 15.5 11.9 300 14.5 - 16 1-1/4 x 48 x 5 373

3-BOLT BASE

3RTA 8 4C 8 4 x 3 x 8 0.125 12.1 9.3 7.3 75 6.5 - 7.25 3/4 x 18 x 3 233RTA 10 4C 10 4 x 3 x 10 0.125 8.8 6.7 5.2 75 6.5 - 7.25 3/4 x 18 x 3 273RTA 12 4C 12 4 x 3 x 12 0.125 6.6 4.8 3.6 75 6.5 - 7.25 3/4 x 18 x 3 313RTA 14 4C 14 4 x 3 x 14 0.125 4.9 3.4 2.4 75 6.5 - 7.25 3/4 x 18 x 3 343RTA 16 4C 16 4 x 3 x 16 0.125 3.5 2.3 1.5 75 6.5 - 7.25 3/4 x 18 x 3 383RTA 16 5C 16 5 x 3 x 16 0.125 6.9 5.0 3.8 75 7.5 - 8.5 3/4 x 18 x 3 433RTA 18 5C 18 5 x 3 x 18 0.125 5.0 3.5 2.5 150 7.5 - 8.5 3/4 x 18 x 3 473RTA 18 5E 18 5 x 3 x 18 0.156 7.0 5.0 3.7 150 7.5 - 8.5 3/4 x 18 x 3 573RTA 20 5C 20 5 x 3 x 20 0.125 3.8 2.5 1.6 150 7.5 - 8.5 3/4 x 18 x 3 503RTA 20 5E 20 5 x 3 x 20 0.156 5.5 3.8 2.6 150 7.5 - 8.5 3/4 x 18 x 3 62

18”

C

A

C

A


POLE DATANUMBEROF BOLTS

SHAFT BASE SIZEBOLT CIRCLE

A

BOLT PROJECTION

B

BASE SQUARE

CTEMPLATE


4-BOLT BASE

5" 7.5" - 9.5" 3.25" 9.25" ABTEMPLATE PJ50032 AB18-06" 9" - 10" 3.50" 10" ABTEMPLATE PJ50033 AB30-07" 9.875" - 11.25" 4.125" 10.5" ABTEMPLATE PJ50034 AB36-08" 11" - 12" 4.25" 11.5" ABTEMPLATE PJ50035 AB36-0

10"G 14.25" - 16.25" 4.50" 14.5" ABTEMPLATE PJ50036 AB40-010"J 14.5" - 16" 5.00" 14.5" ABTEMPLATE PJ50063 AB48-0

3-BOLT BASE

4" 6.5" - 7.25" 3.25" 8.875" ABTEMPLATE PJ50128 AB18-05" 7.5" - 8.5" 3.25" 10.25" ABTEMPLATE PJ50129 AB18-0

B

Notes

(DMxx) side drilling.

specifications.

anchor bolts. Hand hole is located on opposite side of drill-ing. For special drillings, consult factory.

PRODUCT INFORMATION

LITHO

NIA

OU

TDO

OR


Aluminum PO

LES

RTAURound Tapered Aluminum with Upsweep Mast Arms

Intended Use

Round tapered aluminum

roadway pole with upsweep

mast arm(s) for up to 40-foot

mounting heights including

rise of arm.

Construction

Shaft: Shaft is spun tapered

from seamless 6063 alloy

aluminum tubing and heat

treated to a T6 temper.

Circumferential satin-brushed

finish. Round in cross-section

down length of shaft and cone

tapered to the base diameter.

Arm: Body of the mounting

arm is tapered aluminum

alloy 6063-T6 tube with

2-3/8 " OD (2" NPS) pipe size

at luminaire end. The pole

end of the arm is welded to

an aluminum alloy 6063-T6

mounting plate.

Mounting: Arm mounting

plate bolts to the shaft using

stainless steel bolts, nuts and

washers. A grommet is pro-

vided for the 1-1/4" diameter

wiring hole between the pole

shaft and the bracket arm.






and bottom.















Hand hole: A nominal 3" x

5" or 4" x 6" reinforced flush

covered hand hole is centered

18" above the base.


Top cap: Removable top cap

provided.






POLE DATA

SHAFT BASE SIZE

BOLT CIRCLE

A

BOLT PROJECTION

B

BASE SQUARE

CTEMPLATE


6" 9" - 10" 4.75" 9.75" ABTEMPLATE PJ50033 AB30-07" 10" - 11" 4.75" 10.5" ABTEMPLATE PJ50034 AB36-08" 11" - 12" 4.75" 11.25" ABTEMPLATE PJ50035 AB36-0

10" 14" - 15" 5.25" 14" ABTEMPLATE PJ50481 AB481-0

18”

A

B

Notes

upsweep arm.

consult factory.


TECHNICAL INFORMATION

CATALOG NUMBERNOM.

MOUNT. HT. (FT.)

MTG. ARM

LENGTH (FT.)


TOP IN.)

WALL THICK.

(IN.)

EPA FT2

W/1.3 GUST UP TO 100 MPH (PER

ARM)

MAX. WT.

(LBS.)

BOLT CIRCLE

(IN.)


IN.)

APPROX. SHIP WT.

(LBS.)

SINGLE -ARM POLES

RTAU 20 6E BMA US4 20 4 6 x 4.5 0.156 2 65 9" - 10" 3/4 x 30 x 3 90RTAU 20 6G BMA US6 20 6 6 x 4.5 0.188 2 65 9" - 10" 3/4 x 30 x 3 100RTAU 20 6G BMA US8 20 8 6 x 4.5 0.188 1.74 65 9" - 10" 3/4 x 30 x 3 105RTAU 25 7E BMA US4 25 4 7 x 4.5 0.156 2 65 10" - 11" 1 x 36 x 4 120RTAU 25 7G BMA US6 25 6 7 x 4.5 0.188 2 65 10" - 11" 1 x 36 x 4 140RTAU 25 8E BMA US8 25 8 8 x 4.5 0.156 1.74 65 11" - 12" 1 x 36 x 4 135RTAU 30 8E BMA US4 30 4 8 x 4.5 0.156 2 65 11" - 12" 1 x 36 x 4 150RTAU 30 8G BMA US6 30 6 8 x 4.5 0.188 2 65 11" - 12" 1 x 36 x 4 170RTAU 30 8G BMA US8 30 8 8 x 4.5 0.188 1.74 65 11" - 12" 1 x 36 x 4 175RTAU 35 8G BMA US4 35 4 8 x 4.5 0.188 2 65 11" - 12" 1 x 36 x 4 190RTAU 35 8J BMA US6 35 6 8 x 4.5 0.250 2 65 11" - 12" 1 x 36 x 4 240RTAU 35 8J BMA US8 35 8 8 x 4.5 0.250 1.74 65 11" - 12" 1 x 36 x 4 245RTAU 40 8J BMA US4 40 4 8 x 4.5 0.250 2 65 11" - 12" 1 x 36 x 4 255RTAU 40 8J BMA US6 40 6 8 x 4.5 0.250 2 65 11" - 12" 1 x 36 x 4 260RTAU 40 10G BMA US8 40 8 10 X 6 0.188 1.74 65 14" - 15" 1 x 48 x 4 265

DOUBLE -ARM POLES

RTAU 20 6G BMA 2US4 20 4 6 x 4.5 0.188 2 65 9" - 10" 3/4 x 30 x 3 105RTAU 20 7E BMA 2US6 20 6 7 x 4.5 0.156 2 65 10" - 11" 1 x 36 x 4 120RTAU 20 7G BMA 2US8 20 8 7 x 4.5 0.188 1.74 65 10" - 11" 1 x 36 x 4 140RTAU 25 8E BMA 2US4 25 4 8 x 4.5 0.156 2 65 11" - 12" 1 x 36 x 4 140RTAU 25 8E BMA 2US6 25 6 8 x 4.5 0.156 2 65 11" - 12" 1 x 36 x 4 145RTAU 25 8G BMA 2US8 25 8 8 x 4.5 0.188 1.74 65 11" - 12" 1 x 36 x 4 170RTAU 30 8G BMA 2US4 30 4 8 x 4.5 0.188 2 65 11" - 12" 1 x 36 x 4 175RTAU 30 8J BMA 2US6 30 6 8 x 4.5 0.250 2 65 11" - 12" 1 x 36 x 4 215RTAU 30 8J BMA 2US8 30 8 8 x 4.5 0.250 1.74 65 11" - 12" 1 x 36 x 4 220RTAU 35 10G BMA 2US4 35 4 10 x 6 0.188 2 65 14" - 15" 1 x 48 x 4 270RTAU 35 10G BMA 2US6 35 6 10 x 6 0.188 2 65 14" - 15" 1 x 48 x 4 280RTAU 35 10J BMA 2US8 35 8 10 x 6 0.250 1.74 65 14" - 15" 1 x 48 x 4 350RTAU 40 10L BMA 2US4 40 4 10 x 6 0.219 2 65 14" - 15" 1 x 48 x 4 320RTAU 40 10L BMA 2US6 40 6 10 x 6 0.219 2 65 14" - 15" 1 x 48 x 4 325RTAU 40 10J BMA 2US8 40 8 10 x 6 0.250 1.74 65 14" - 15" 1 x 48 x 4 365

PRODUCT INFORMATION

LITH

ON

IA O

UTD

OO

R


PO

LES Aluminum

RSAHRound Straight Aluminum, Hinged

Intended Use


hinged pole with 10-to 20-

foot mounting heights. Good

application where mainte-

nance access is limited.

Construction








Hinged anchor base: Cast

from A356 aluminum

alloy and heat treated to T6

temper. Shaft and tilting

section of the hinged base

are circumferentially welded

top and bottom. The tilting

and anchored sections of

the hinged base are joined

by a 3/4" diameter solid

aluminum pivot rod. The

tilting section of the hinged

base is held in a vertical

position by three 1/2"-13 x

2" stainless steel hex head

bolts that attach to stainless

steel inserts cast into the

aluminum base.











Grounding: Anchor base

plate is tapped for 3/8"-16

UNC grounding bolt (pro-

vided by others).

Hand hole: Available as an

option; Located 90° to the

right of the hinge.




mount poles.

Base cover: Includes cast-

aluminum two-piece cover.




CATALOG NUMBER



WALL THICK.

(IN.)

80 MPH

90 MPH

100 MPH

MAX. WT.

BOLT CIRCLE

(IN.)


IN.)

APPROX. SHIP WT.

(LBS)RSAH 10 4C 10 4 x 10 0.125 8.2 6.1 4.7 100 8.5 - 10 3/4 x 18 x 3 43RSAH 14 4C 14 4 x 14 0.125 4.4 3.0 2.1 100 8.5 - 10 3/4 x 18 x 3 50RSAH 14 5E 14 5 x 14 0.156 10.6 8.2 6.5 100 8.5 - 10 3/4 x 18 x 3 66RSAH 16 4C 16 4 x 16 0.125 3.1 1.9 1.2 100 8.5 - 10 3/4 x 18 x 3 54RSAH 16 5C 16 5 x 16 0.125 6.2 4.7 3.6 100 8.5 - 10 3/4 x 18 x 3 60RSAH 16 6E 16 6 x 16 0.156 13.8 10.7 8.5 100 8.5 - 10 3/4 x 30 x 3 88RSAH 18 5C 18 5 x 18 0.125 4.5 3.3 2.5 130 8.5 - 10 3/4 x 18 x 3 65RSAH 18 5G 18 5 x 18 0.188 8.2 6.2 4.9 130 8.5 - 10 3/4 x 18 x 3 90RSAH 20 5C 20 5 x 20 0.125 3.2 2.2 1.6 130 8.5 - 10 3/4 x 18 x 3 69RSAH 20 5G 20 5 x 20 0.188 6.4 4.8 3.7 130 8.5 - 10 3/4 x 18 x 3 97RSAH 20 6G 20 6 x 20 0.188 11.7 9.0 7.1 130 8.5 - 10 3/4 x 30 x 3 110

POLE DATASHAFT BASE

SIZEBOLT CIRCLE

ABOLT PROJECTION

BBASE SQUARE



4" 8.5" - 10" 3.50" 12.625" ABTEMPLATE PJ50060 AB18-05" 8.5" - 10" 3.50" 12.625" ABTEMPLATE PJ50061 AB18-06" 8.5" - 10" 3.50" 12.625" ABTEMPLATE PJ50062 AB30-0

Notes


Hinge base poles without handholes will be drilled for the first fixture 90 degrees to the right of the hinge. When a handhole is specified as an adder, the first fixture drilling will be 90 degreees to the right of the handhole. If the customer has different fixture drilling orientation requirements, please specify that on the purchase order.

A

C

3/4" Solid aluminum pivot rod

B

Two-piece cast aluminum cover

Trapped 3/8" - 16 for ground connector

Two piece castAluminum cover

Hinge direction "A" side of pole

PRODUCT INFORMATION

LITHO

NIA

OU

TDO

OR


PO

LESAluminum

SSAHSquare Straight Aluminum, Hinged

Intended Use

Square straight aluminum

hinged pole with 10- to 20-

foot mounting heights. Good

application where mainte-

nance access is limited.

Construction


6063-T6 aluminum alloy,

square tube is uniform in



Hinged anchor base: Cast

from A356 aluminum

alloy and heat-treated to

T6 temper. Shaft and tilting

section of the hinged base

are circumferentially welded

top and bottom. The tilting

and anchored sections of

the hinged base are joined

by a 3/4" diameter solid

aluminum pivot rod. The

tilting section of the hinged

base is held in a vertical

position by three 1/2"-13 x

2" stainless steel hex-head

bolts that attach to stainless

steel inserts cast into the

aluminum base.











Grounding: Anchor base

plate is tapped for 3/8"-16

UNC grounding bolt (pro-

vided by others).

Hand hole: Available as an

option; located 90° to the

right of the hinge.




mount poles.

Base cover: Includes cast-

aluminum two-piece cover.




CATALOG NUMBER



WALL THICK.

(IN.)

80 MPH

90 MPH

100 MPH

MAX. WT.

BOLT CIRCLE

(IN.)


IN.)

APPROX. SHIP WT.

(LBS.)SSAH 10 4C 10 4 x 10 0.125 13.1 9.9 7.5 100 8.5 - 10 3/4 x 18 x 3 48SSAH 12 4C 12 4 x 12 0.125 9.6 7.0 5.1 100 8.5 - 10 3/4 x 18 x 3 53SSAH 14 4C 14 4 x 14 0.125 7.0 4.9 3.3 100 8.5 - 10 3/4 x 18 x 3 57SSAH 15 4C 15 4 x 15 0.125 6.0 4.0 2.6 100 8.5 - 10 3/4 x 18 x 3 60SSAH 16 4C 16 4 x 16 0.125 5.0 3.2 1.9 100 8.5 - 10 3/4 x 18 x 3 62SSAH 16 4G 16 4 x 16 0.188 8.9 6.2 4.3 150 8.5 - 10 3/4 x 30 x 3 86SSAH 18 4C 18 4 x 18 0.125 3.4 1.8 0.7 100 8.5 - 10 3/4 x 18 x 3 67SSAH 18 4G 18 4 x 18 0.188 6.8 4.5 2.9 100 8.5 - 10 3/4 x 30 x 3 93SSAH 18 5G 18 5 x 18 0.188 12.6 8.8 6.1 150 9.312 - 10 3/4 x 30 x 3 108SSAH 20 4G 20 4 x 20 0.188 5.0 3.0 1.6 150 8.5 - 10 3/4 x 30 x 3 100SSAH 20 5G 20 5 x 20 0.188 9.9 6.6 4.2 175 9.312 - 10 3/4 x 30 x 3 117

POLE DATA

SHAFT BASE SIZE

BOLT CIRCLE

A

BOLT PROJECTION

B

BASE SQUARE



4"C 8.5" - 10" 3.5" 11.688" ABTEMPLATE PJ50055 AB18-04"G 8.5" - 10" 3.5" 11.688" ABTEMPLATE PJ50055 AB30-05" 9.312" - 10" 3.5" 11.688" ABTEMPLATE PJ50056 AB30-0

B

Two-piece cast aluminum cover

Notes

INSTALLATION NOTES: Factory-supplied templates must be used when setting anchor bolts. Lithonia Lighting will not accept claim for incorrect anchorage placement due to failure to use Lithonia Lighting factory templates. Do not erect poles without having fixtures installed. If poles are stored outside, all protective wrapping must be removed immediately upon delivery to prevent finish damage. Hinge base poles without handholes will be drilled for the first fixture 90 degrees to the right of the hinge. When a handhole is specified as an adder, the first fixture drilling will be 90 degreees to the right of the handhole. If the customer has different fixture drilling orientation requirements, please specify that on the purchase order.

C

A

3/4" Solid aluminum pivot rod

Hinge direction "A" side of pole

Trapped 3/8" - 16 for ground connector

Two-piece castaluminum cover

PRODUCT INFORMATION

LITH

ON

IA O

UTD

OO

R


PO

LES Fiberglass

Notes

side drilling.

RTFDBRound Tapered Fiberglass, Direct Burial

Intended Use

Round tapered direct-burial

(embedded) fiberglass gen-

eral purpose pole for up to

35-foot mounting heights.

Construction

Shaft: Reinforced composite

shaft incorporating "E" type

fiberglass and pigmented,

UV inhibiting, thermosetting

polyester resin. Shaft is paint-

ed with a polyurethane top

coat providing a minimum

1.5 mil dry film thickness and

smooth surface finish.

Hand hole: Standard 2-1/2"

x 5" hand hole opening with

non-metallic oval shaped

covers secured with vandal-

resistant stainless steel 1/4"

socket head screws.




Top cap: Removable top cap

provided with drill-mount poles.



TECHNICAL INFORMATION EPA (FT2) WITH 1.3 GUSTCATALOG

NUMBERNOM. MOUNT.

HT. (FT.)POLE SHAFT SIZE

(BASE IN. X TOP IN. X FT.)80 MPH 90 MPH 100 MPH

MAX. WT. (LBS.)

APPROX. SHIP WT. (LBS.)

RTFDB 18 6X 14 6.5 x 4.1 x 18 14.0 10.4 7.9 150 34RTFDB 20 6-6X 16 6.7 x 4.1 x 20 10.0 7.4 5.5 100 38RTFDB 24 6-7X 20 6.7 x 4.1 x 24 8.2 5.8 4.1 150 46RTFDB 30 8-3X 25 8.2 x 4.5 x 30 6.2 4.7 3.6 100 71RTFDB 30 8-4X 25 8.4 x 4.7 x 30 14.5 11.2 8.9 200 98RTFDB 35 8-4X 30 8.4 x 4.7 x 35 10.5 8.0 6.2 200 116RTFDB 35 8-5X 30 8.5 x 4.9 x 35 14.8 11.4 9.0 300 153

RTFDB 41 11-8X 35 11.8 x 6.4 x 41 14.3 10.8 7.8 300 218

INSTALLATION NOTES: Do not erect poles without having fixtures installed. If poles are stored outside, all protective wrapping must be removed immediately upon delivery to prevent finish damage.

18"

24"

Hand hole

Finish grade

Wiring access

PRODUCT INFORMATIONPRODUCT INFORMATION Fiberglass

RTFRound Tapered Fiberglass

Intended Use

Round tapered fiberglass


to 45 foot mounting heights.

Construction




UV inhibiting, thermoset-

ting polyester resin. Shaft is

painted with a polyurethane

top coat providing a mini-

mum 1.5 dry film thickness

and smooth surface finish.

Anchor base: Heavy-duty

metal base plate is perma-

nently bonded to the outside

of the fiberglass shaft.













non-metallic oval shaped



socket head screws.






mount poles.

Base cover: Not included;

Available as an optional

accessory.


ADDITIONAL INFORMATION For ordering information see page 588 .For additional product information, visit www.lithonia.com.

B

18”

Notes

side drilling.


TECHNICAL INFORMATION EPA (FT2) WITH 1.3 GUSTCATALOG

NUMBERNOM. MOUNT.

HT. (FT.)POLE SHAFT SIZE (BASE

IN. X TOP IN. X FT.)80 MPH 90 MPH

100 MPH

MAX. WT.

BOLT CIRCLE (IN.)



RTF 10 5-4X 10 5.4 x 4.1 x 10 19.0 14.6 11.4 150 8 5/8 x 21 x 3 23RTF 12 5-6X 12 5.6 x 4.1 x 12 16.0 12.1 9.3 150 8.5 5/8 x 21 x 3 28RTF 14 5-9X 14 5.9 x 4.1 x 14 14.0 10.4 7.9 150 8.5 5/8 x 21 x 3 32RTF 16 6-1X 16 6.1 x 4.1 x 16 10.0 7.4 5.5 100 8.5 5/8 x 21 x 3 36RTF 20 6-6X 20 6.6 x 4.1 x 20 8.2 5.8 4.1 100 9.5 5/8 x 21 x 3 45RTF 20 7-3X 20 7.3 x 4.6 x 20 14.4 11.1 8.9 200 11.5 1 x 36 x 4 62RTF 25 6-7X 25 6.7 x 4.1 x 25 5.4 3.4 2.0 100 9.5 5/8 x 21 x 3 55RTF 25 7-3X 25 7.3 x 4.6 x 25 9.6 7.3 5.7 200 11.5 1 x 36 x 4 75RTF 30 8-4X 30 8.4 x 4.7 x 30 11.2 8.5 6.7 100 11.5 1 x 36 x 4 106RTF 30 8-5X 30 8.5 x 4.9 x 30 15.6 12.0 9.5 200 11.5 1 x 36 x 4 140

RTF 30 10-5X 30 10.5 x 6.6 x 30 28.7 22.4 17.4 300 14.5 1-1/4 x 42 x 6 202RTF 35 8-4X 35 8.4 x 4.7 x 35 5.5 3.8 2.7 100 11.5 1 x 36 x 4 125RTF 35 8-5X 35 8.5 x 4.9 x 35 8.5 6.2 4.7 200 11.5 1 x 36 x 4 161

RTF 35 11-2X 35 11.2 x 6.6 x 35 21.8 16.6 12.5 300 15 1-1/4 x 42 x 6 248RTF 40 11-7X 40 11.7 x 6.2 x 40 6.4 4.3 2.4 300 15.5 1-1/4 x 42 x 6 165RTF 40 11-8X 40 11.8 x 6.4 x 40 12.2 8.8 6.0 300 15.5 1-1/4 x 42 x 6 227

RTF 40 12X 40 12.0 x 6.9 x 40 25.8 19.3 14.3 300 15.5 1-1/4 x 42 x 6 317RTF 45 11-7X 45 11.7 x 6.2 x 45 3.9 2.2 0.6 300 15.5 1-1/4 x 42 x 6 183RTF 45 11-9X 45 11.9 x 6.6 x 45 15.2 10.9 7.6 300 15.5 1-1/4 x 42 x 6 295

For pole data, see page 607.

PRODUCT INFORMATION

LITHO

NIA

OU

TDO

OR


PO

LESFiberglass

SSFSquare Straight Fiberglass

Intended Use

Square straight fiberglass



Construction




UV-inhibiting, thermoset-

ting polyester resin. Shaft

is formed by the pultrusion

process with fiberglass

strands traversing the length

of the pole.

Anchor base: Heavy-duty

metal base plate is perma-

nently bonded to the outside

of the fiberglass shaft.













non-metallic oval-shaped



socket-head screws.






mount poles.






CATALOG NUMBER



80 MPH 90 MPH100

MPH

MAX. WT.

(LBS.)

BOLT CIRCLE

(IN.)


APPROX. SHIP WT.

(LBS.)SSF 6 4X 6 4 x 6 20.0 20.0 20.0 150 8 5/8 x 21 x 3 18SSF 8 4X 8 4 x 8 20.0 20.0 20.0 150 8 5/8 x 21 x 3 23

SSF 10 4X 10 4 x 10 20.0 20.0 16.1 150 8 5/8 x 21 x 3 27SSF 12 4X 12 4 x 12 20.0 16.4 12.8 150 8 5/8 x 21 x 3 31SSF 14 4X 14 4 x 14 14.2 10.7 8.2 150 8 5/8x 21 x 3 35SSF 16 4X 16 4 x 16 11.9 8.8 6.5 150 8 5/8 x 21 x 3 39SSF 20 4X 20 4 x 20 8.3 5.8 4.0 150 8 5/8 x 21 x 3 47SSF 20 5X 20 5 x 20 14.9 11.1 8.4 300 11 1 x 36 x 4 102SSF 25 4X 25 4 x 25 5.0 3.0 1.5 150 8 5/8 x 21 x 3 57SSF 25 5X 25 5 x 25 10.6 7.6 5.4 300 11 1 x 36 x 4 125SSF 30 5X 30 5 x 30 5.7 3.4 1.7 300 11 1 x 36 x 4 148

SSF 30 5XHD 30 5 x 30 8.6 5.1 2.6 300 11 1 x 36 x 4 164

SSF POLE DATASHAFT BASE

SIZEBOLT CIRCLE

ABOLT PROJECTION

BBASE SQUARE

CTEMPLATE


4" 8" 3" 7.41" ABTEMPLATE PJ50123 AB21-05" 11" 4" 11.125" ABTEMPLATE PJ50124 AB36-0

A

13/16” dia. hole

C

SSF 4" Shaft

A

1-1/4” x 2” slot

C

SSF 5" Shaft

B

Notes


RTF POLE DATASHAFT BASE

SIZEBOLT CIRCLE

ABOLT PROJECTION

BBASE SQUARE

CTEMPLATE

DESCRIPTION5.4" 8" 3" 7.75" PJ50108

5.6" 8.5" 3" 8.125" PJ50109

5.9" 8.5" 3" 8.125" PJ50110

6.1" 8.5" 3" 8.125" PJ50111

6.6" 9.5" 3" 8.8" PJ50112

6.7" 9.5" 3" 8.8" PJ50113

7.3" 11.5" 4" 11" PJ50114

8.4" 11.5" 4" 11" PJ50115

8.5" 11.5" 4" 11" PJ50116

10.5" 14.5" 4" 13.3" PJ50117

11.2" 15" 4" 13.5" PJ50118

11.7" 15.5" 4" 14" PJ50119

11.8" 15.5" 4" 14" PJ50120

11.9" 15.5" 4" 14" PJ50121

12.0" 15.5" 4" 14" PJ50122

PRODUCT INFORMATION

LITH

ON

IA O

UTD

OO

R


PO

LES Concrete

STCSquare Tapered Concrete

Intended Use

Square tapered direct-bury

(embedded) concrete pole

for up to 40-foot mounting

heights.

Construction

Shaft: Concrete mix has a

minimum 28-day compres-

sive strength of 8500 psi and

conforms with ASTM-C150.

Prestressing steel reinforce-

ment is uncoated 7-wire,

stress-relieved strand per

ASTM-A416. Steel spiral

reinforcement conforms to

ASTM-A82 and is not less

than .120-inch (11-gauge)

diameter with a maximum

pitch of 6 inches. Poles have

a continuous taper of 0.165

inches per foot.

Grounding: An 18" long, #4

stranded copper pigtail, con-

nected to reinforced strand,

is provided at pole top and at

cable entrance below grade.

Hand hole: A 3" x 5" hand

hole is located 24" above

ground line and a 2-1/2" x 7"

or larger conduit entrance

is located 18" below ground

line. Inserts for the hand

hole and conduit entrance

are non-corrosive and

weatherproof. Hand-hole

frames and covers conform to

ASTM-B240.


high-strength galvanized,


Finish: Natural concrete finish.


TECHNICAL INFORMATION- EPA (FT2) WITH 1.3 GUSTCATALOG

NUMBERNOM. MOUNT.

HT. (FT.)POLE SHAFT SIZE

(BASE IN. X TOP IN. X FT.)80 MPH 90 MPH 100 MPH


STC 20 7-24X 15 7.24 x 4.0 x 20 22 16 13 680STC 20 9-24X 16 9.24 x 6.0 x 20 48 37 29 1,110STC 24 6-40X 20 6.4 x 6.4 x 24 3.5 3.5 3.5 917STC 25 8-05X 20 8.05 x 4.0 x 25 21 16 12 985

STC 25 10-05X 20 10.05 x 6.0 x 25 44 34 26 1,530STC 30 8-86X 25 8.86 x 4.0 x 30 20 15 11 1350

STC 30 10-86X 25 10.86 x 6.0 x 30 49 33 28 2,000STC 35 9-67X 29 9.67 x 4.0 x 35 17 12 8 1,800

STC 35 11-67X 29 11.67 x 6.0 x 35 43 32 24 2540STC 35 6-40X 30 6.4 x 6.4 x 35 3.5 N/A N/A 1,337STC 35 7-25X 30 7.25 x 7.25 x 35 3.5 3.5 N/A 1,685

STC 36 8X 30 8.0 x 8.0 x 36 3.5 3.5 3.5 2,145STC 40 12-48X 34 12.48 x 6.0 x 40 42 30 22 3,130STC 45 13-29X 38 13.29 x 6.0 x 45 41 31 22 3,795

STC 46 8X 40 8.0 x 8.0 x 46 3.5 N/A N/A 2,740STC 47 9-25X 40 9.25 x 9.25 x 47 3.5 3.5 N/A 3,813


3” x 5” hand holewith cover

Finish grade

Pigtail

Cast in 1-1/2”hole @ 45°

24”

18”

Notes

PRODUCT INFORMATION

LITHO

NIA

OU

TDO

OR


PO

LESConcrete

SPRTCRound Tapered Concrete Sportslighting

Intended Use

Round tapered direct bury

(embedded) concrete sports

lighting pole for up to 100


Construction

Shaft: Concrete mix has a

minimum 28-day compres-

sive strength of 11,000 PSI

and conforms with ASTM-

C150. Prestressing steel

reinforcement is uncoated

7-wire, stress relieved strand

per ASTM-A416. Steel spiral

reinforcement conforms to

ASTM-A82 and is not less

than .203 (5-gauge wire)

diameter. Poles have a

continuous taper of 0.216

inches per foot. Poles are

centrifugally spun and round

in cross-section with a hol-

low center.

Grounding: A continuous

solid or stranded copper

ground wire is cast into the

pole. Wire terminates at

top of pole to accept a 1/2"

x24" lightning rod. Copper

coupling, approximately 12"

below grade, provides a 1/2 "

tapped insert at pole face for

grounding hardware.

Hand hole: 4" x 8" hand hole

is located 24" above ground

line. 4" x 8" conduit entrance

is located 18" below ground

line. A 2-1/2" x 8" reinforced

hand hole with flush cover

is located at cage/crossarm

locations. 1-1/2" coupling

wire inlet/outlet is located

opposite this hand hole.

Inserts for hand hole and

conduit entrance are non-

corrosive and weatherproof.

Hand-hole frames and covers

conform to ASTM-B240.




Finish: Natural concrete finish.



CATALOG NUMBERNOM.

MOUNT. HT. (FT.)

POLE SHAFT SIZE (BASE IN. X TOP IN.

X FT.)80 MPH

MAX. WT.

90 MPH

MAX. WT.

100 MPH

MAX. WT.

APPROX. SHIP WT.

(LBS.)SPRTC C6 45 7-17 38 16.47 x 6.75 x 45 31 620 24 480 18 360 3,400SPRTC C5 45 7-17 38 16.47 x 6.75 x 45 39 780 30 600 23 460 3,400SPRTC C4 45 7-17 38 16.47 x 6.75 x 45 52 1,040 40 800 31 589 3,450SPRTC C4 60 7-20 50 19.71 x 6.75 x 60 47 893 35 665 26 520 5,450SPRTC C2 60 9-22 50 21.78 x 8.82 x 60 85 1,615 65 1,235 48 912 7,950SPRTC H1 60 9-22 50 21.78 x 8.82 x 60 138 2,622 101 1,919 80 1,520 8,100SPRTC C3 70 9-24 60 23.94 x 8.82 x 70 56 1,064 42 798 32 608 9,900SPRTC C1 70 9-24 60 23.94 x 8.82 x 70 90 1,710 69 1,311 52 988 10,100

SPRTC H2 70 10-24 60 23.94 x 8.82 x 70 139 2,641 103 1,957 81 1,539 10,400SPRTC C2 80 9-26 68 26.1 x 8.82 x 80 63 1,197 45 855 34 646 12,300SPRTC C1 80 9-26 68 26.1 x 8.82 x 80 85 1,445 65 1,105 48 816 12,300

SPRTC H2 80 10-26 68 26.1 x 8.82 x 80 136 2,584 101 1,919 79 1,501 12,800SPRTC C2 90 9-28 77 28.26 x 8.82 x 90 54 1,026 39 741 28 532 14,850SPRTC C1 90 9-28 77 28.26 x 8.82 x 90 78 1,482 56 1,064 42 798 14,950

SPRTC H2 90 10-28 77 28.26 x 8.82 x 90 132 2,508 97 1,843 75 1,425 15,350SPRTC C1 105 9-32 91 31.5 x 8.82 x 105 70 1,330 49 931 35 665 19,250SPRTC H1 105 9-32 91 31.5 x 8.82 x 105 99 1,881 74 1,406 54 1,026 19,450

SPRTC H3 105 11-34 91 33.68 x 11.0 x 105 144 2,736 105 1,995 80 1,520 22,050SPRTC C1 115 9-34 100 33.66 x 8.82 x 115 65 1,235 45 855 31 589 22,350SPRTC H1 115 9-34 100 33.66 x 8.82 x 115 96 1,824 70 1,330 50 950 22,550

SPRTC H2 115 10-34 100 33.66 x 8.82 x 115 125 2,375 91 1,729 69 1,311 22,800


1/2” ground coupling at 6” below groundline

24"

18"

Cast in 4" x 8" hand-holeframe and cover

Cast in 4" x 8" slot

Notes

PRODUCT INFORMATION

LITH

ON

IA O

UTD

OO

R


PO

LES Options & Accessories

ANGLE IRON CROSSARMS

ORDERING INFORMATIONORDERING INFORMATION


Notes1 Angle iron crossarms can be used with other poles if ordered with the pole.

Notes1 Pre-wired tubular crossarms can be used with other poles if ordered with the pole.

CATALOG NUMBER

ARM EPA (SQ. FT.)WEIGHT (LBS.)

ACRCW2 1.80 50.0

ACRCW3 3.00 86.0

ACRCW4 4.50 121.0

ACRCW5 5.70 157.0

ACRCW6 7.00 193.0

CATALOG NUMBER

ARM EPA (SQ. FT.)WEIGHT (LBS.)

SPXCW2 1.00 23.5

SPXCW3 1.80 40.0

SPXCW4 2.50 56.5

SPXCW5 3.20 73.0

SPXCW6 3.90 89.5

PRE-WIRED TUBULAR CROSSARMS

PRODUCT INFORMATION Options & Accessories

Concrete or Wood Sportslighting Poles

Concrete or Wood Sportslighting Poles

Intended Use

For use on round, tapered con-

crete or wood sportslighting

poles. Projected area is for the

crossarm only. The crossarm

projected area is added to the

luminaire projected area to

get a total effective projected

area (EPA).

Intended Use

For use on round, tapered

concrete or wood sportslight-

ing poles. Projected area is for

the crossarm only. The cros-

sarm projected area is added

to the luminaire projected

area to get a total effective

projected area (EPA). Use

in conjunction with CV3P

luminaire options.

8’6" 4’3"

Pole and mounting hardware1

3.5" x 5.0" x 0.25" angle(8.9 x 12.7 x .64 angle) 2’6"

(6.6)6"

6.5"

3.5" x 5.0" x 0.25" angle2’6" 6.0"

6’ 1’9"6.5"

Pole and mounting hardware1Pole and mounting hardware1

ACRCW2, 2-Fixture Angle Arm ACRCW3, 3-Fixture Angle Arm

3.5" x 5.0" x 0.25" angle 6.0"

3’6" 1’9"6.5"

ACRCW4, 4-Fixture Angle Arm

ACRCW5, 5-Fixture Angle Arm ACRCW6, 6-Fixture Angle Arm

3.5" x 5.0" x 0.25" angle 2’6" 6.0"

11’4’3"

6.5"

Pole and mounting hardware1 Pole and mounting hardware1

3.5" x 5.0" x 0.25" angle 2’6" 6.0"

13’6" 6’9"6.5"

SPXCW2, 2-Fixture Angle Arm SPXCW3, 3-Fixture Angle Arm SPXCW4, 4-Fixture Angle Arm

Pole and mounting hardware1Gusset (4 places)

6.0"

3’6" 1’9"6.5"

2.5" Sched. 40 pipe(2.88 OD)

Pole and mounting hardware1Gusset (4 places)

2’6" 6.0"

6’ 1’9"6.5"

2.5" Sched. 40 pipe(2.88 OD)

Pole and mounting hardware1Gusset

(4 places)2’6" 6.0"

8’6" 4’3"6.5"

SPXCW5, 5-Fixture Angle Arm SPXCW6, 6-Fixture Angle Arm

Gusset(4 places) 2’6" 6.0"

13’6" 6’9"6.5"

3.5" x 5.0" x 0.25" angle

Pole and mounting hardware1Gusset

(4 places) 2’6" 6.0"

11’ 4’3"6.5"

2.5" Sched. 40 pipe(2.88 OD)

Pole and mounting hardware1

PRODUCT INFORMATION

LITHO

NIA

OU

TDO

OR


Wood PO

LES

SSWDBSquare Straight Wood, Direct Burial

Intended Use

Square straight laminated

wood pole for up to 35 foot

mounting heights. Espe-

cially suited for residential,

recreational and resort

developments, parks,

playgrounds and paths to

provide functional lighting

by night and attractive

landscaping by day.

Construction

Shaft: L1 laminate grade

West Coast Douglas Fir for

strength and appearance.

Construction grade on

all exposed wide faces

per WCLIB Grading Rules.

Lamination utilizes adhesives

meeting or exceeding

the exterior durability

performance requirements of

most recent revision of U.S.

Commercial Standard ANSI/

AITC A190.1-1983. A raceway

access hole for underground

wiring is centered 2'6" below

ground line and rises 30° to

vertical. If required, above

ground juction boxes of

various types can be used.

Available shaft widths are 4,

5, 6 and 7 inches.

Surface finish, appearance

and tolerance: Laminations

are kiln dried to average

moisture content of 14.5%

+/- 2.5% before surfacing.

Open defects such as knot

holes exceeding 1/2" in

diameter or wane exceeding

1/4" x 12" are filled with

woodfiller. Sides are surfaced

four faces with edges eased

to 3/8" radius. Tolerances are

from +0 to -1/8" for width

and thickness and +/- 1/4"

in length.

Preservative treatment:

Standards are treated with

6% pentachlorophenol borne

in light hydrocarbon solvent

in conformance with AWPA

Standards to a minimum net

retention of 0.60 pounds per

cubic foot of penta. All Stan-

dards are incised on all four

sides to 3/4" in depth from

butt to 12" above indicated

ground mark.

Wrapping: Lighting

standards are individually

wrapped using 2-ply laminat-

ed paper lumber wrap with

waterproof ply on outside to

protect poles.

Top cap: Metal top cap is

provided unless fixture is

tenon mounted.



CATALOG NUMBER

NOM. MOUNT HT. (FT.)

POLE SHAFT SIZE (IN. X IN. X FT.)

80 MPHMAX. WT.

90 MPH

MAX. WT.

100 MPH

MAX. WT.

APPROX. SHIP WT.

(LBS.)SSWDB 10 4X 10 4.5 x 5.125 x 13.5 16.42 150 11.62 150 9.22 150 80SSWDB 12 4X 12 4.5 x 5.125 x 15.5 12.62 150 6.72 150 6.62 150 85SSWDB 15 4X 15 4.5 x 5.125 x 19 8.52 150 5.32 150 3.72 150 110SSWDB 15 5X 15 5.125 x 6 x 19.5 19.42 150 13.9 150 10.22 150 130SSWDB 20 4X 20 4.5 x 5.125 x 24.5 3.92 150 - - - - 140SSWDB 20 5X 20 5.125 x 6 x 25 11.62 150 7.02 150 4.72 150 200SSWDB 20 6X 20 6 x 6.75 x 30 21.42 150 14.22 150 10.62 150 260SSWDB 25 5X 25 5.125 x 6 x 30 6.32 150 2.62 150 - - 250SSWDB 25 6X 25 6 x 6.75 x 30 13.82 150 8.02 150 5.12 150 300SSWDB 30 6X 30 6 x 6.75 x 36 8.02 150 3.22 150 - - 400SSWDB 35 7X 35 6.75 x 7.5 x 41.5 8.02 150 2.32 150 - - 730

WOODEN CROSSARMCATALOG

NUMBERDESCRIPTION

EPA (FT2)

WEIGHT (LBS.)

WA12 2' single-fixture arm 0.86 33WA13 3' single-fixture arm 1.29 37WA14 4' single-fixture arm 1.72 42WA22 2' two-fixture arm 1.51 42WA23 3' two-fixture arm 2.37 50WA24 4' two-fixture arm 3.23 59

INSTALLATION NOTES: Do not erect poles without having fixtures installed. Metal cap must be installed unless fixture is top mounted. Poles are directly embedded in firm soil. Under heavy load, or in poor soil conditions, concrete embedment may be required. For parking lot installations, poles can be fitted with bumper protection devices or a concrete collar. Embedment depth determined by local codes and soil conditions; designed by others.

2 3/4"

4'4'-9"

WA12

WA13

One-Way Crossarms

2'-9"2'

3'-9"3'

9"

9"

4 1/2"

WA14

4 1/2"

9"

(typ.)(typ.)

Two-Way Crossarms

4'2'

6'3'

4 1/2"4 1/2"

8'4'

WA22

2'

WA24

3'

4'

WA23

2 3/4"

Notes

crossarm.

2'-6"

Raceway EntranceSee Section A-A

A

A

Ground Line Mark

1-1/4"

R3/8"

30°

1-1/4"

Ground Line

2' 6"

LC

LC

SCALE: 3" = 1'

Section A-A

1"

Pole Detail Top Profile

PRODUCT INFORMATION

LITH

ON

IA O

UTD

OO

R


PO


SSS HHC: Order as hand-hole cover for full pole description. Also

specify if pole is existing.

CATALOG NUMBER

DESCRIPTION

FDL Festoon duplex outlet, less electric

Provision provided for mounting duplex outlet. When ordering,

specify location in height and feet above base of pole and orienta-

tion from the hand hole.

Four nut covers are standard for RSA, RTAU, RTS, RTSU and RTA

poles only.

TENON MOUNTING SLIPFITTERS ORDER SEPARATELYNUMBER OF FIXTURES

ONETWO

@180°TWO

@90°TWO

@120°THREE @90°

FOUR @90°

TENON OD

2-3/8" T20-190 T20-280 T20-290 T20-320 T20-390 T20-490

2-7/8" T25-190 T25-280 T25-290 T25-320 T25-390 T25-490

4" T35-190 T35-280 T35-290 T35-320 T35-390 T35-490

AERIS™

2-3/8" AST20-190 AST20-280 AST20-290 AST20-320 AST20-390 AST20-490

2-7/8" AST25-190 AST25-280 AST25-290 AST25-320 AST25-390 AST25-490

4" AST35-190 AST35-280 AST35-290 AST35-320 AST35-390 AST35-490

CATALOG NUMBER

DESCRIPTIONCATALOG

NUMBERDESCRIPTION

CPL12 1/2" threaded coupling NPL12 1/2" threaded nipple

CPL34 3/4" threaded coupling NPL34 3/4" threaded nipple

CPL1 1" threaded coupling NPL1 1" threaded nipple

Threaded couplings and/or nipples must be factory installed. When ordering, specify location in height and

feet above base of pole and orientation from the hand hole.

Anchor Bolts

Base Covers

Festoon Outlets

Hand-Hole Cover Plates

Tenon Dimensions

Horizontal Arm Bracket

VD-Vibration Damper

Nut Covers

Bolt-On Tenon

Tamperproof Screws

Available in various sizes for use with Lithonia lighting poles.

Set includes hex nuts and washers. Anchor bolt is partially

galvanized for exposed threads per ASTM-A153. Bolts have

minimum-yield strength rating of 55,000 psi, AASHTO M314

GR55. See individual pole catalog pages for anchor bolt sizes

and description.

CATALOG NUMBER

POLE SQUARE X DEPTH

SBC4 SSS 4" 8.75" x 5.0"

SBC5 SSS 5" 11.50" x 6.0"

SBC6 SSS 6" 12.75" x 5.6"

For full-base cover on other poles, must order FBC. When ordering

separately, specify full pole nomenclature; i.e., FBC for RTA 25 7E. Also

specify if pole is existing.

Two-piece, full-base cover. Four fasteners provided to secure

pieces together. Finished to match pole. Shipped separately.

Standard with steel poles only.

CATALOG NUMBER

MATERIAL EPA (FT2)WEIGHT (LBS)

H1-18A Aluminum .43 7

H1-18S Steel .50 11

H1-18F Fiberglass .45 8

H1-18C Concrete .55 9

Notes SSS and SSA arm attachment is slightly different from RTA. Arm

modifications located on pole to accept arms. Arms shipped as

separate item.

Single or twin side-mounted horizontal arm brackets for ad-

ditional luminaires. Made from 2-3/8" pipe. Upright is 18" from

pole; special arm lengths may be available upon request. Arms

are rated for luminaires up to 4.5 sq. ft. EPA and 100 lbs. per

arm. When ordering, specify location in height and feet above

base of pole and orientation from the hand hole.

Order as TP. Tamperproof screws provided

with hand-hole covers.

CATALOG NUMBER

A B C SWEIGHT (LBS)

SBT-4S 2-3/8" 3" 13-3/4" 5" 7

SBT-5S 2-3/8" 4" 13-3/4" 5" 8

SBT-6S 2-3/8" 5" 13-3/4" 5" 17

NotesIf ordering for existing pole, must order as MAEX and include original order number.

A

D

C

B

It has been found that low steady winds sometimes induce sec-

ond mode vibration in lighting poles. Second mode vibration

is characterized by the maximum periodic motion occurring at

approximately the mid-height of the pole. This type of vibration

can result in failure of the pole and/or luminaire. There is no

method of predicting destructive light pole vibration.

Notes1 FVD – Field installable vibration damper available upon

request. Consult factory.

2 For more information on the effects of vibrations, visit www.lithonia.com.

Field InstalledVibrationDamper

HandholeOpening

Foundation

Couplings & Nipples

PRODUCT INFORMATION

LITHO

NIA

OU

TDO

OR


PO

LESOptions & Accessories

Drill Mounting Options1

DMA393

DM39AS3

DM39AST13

DM39AST23

DM39KADT3

DM28DM28AS

DM28AST1DM28AST2DM28KADT

DM293

DM29AS3

DM29AST13

DM29AST23

DM29KADT3

DM19 DM19AS

DM19AST1 DM19AST2DM19KADT

D B

C

Hand hole A

Square

D B

C

Hand hole A

Round

DM493

DM49AS3

DM49AST13

DM49AST23

DM49KADT3

DM322

DM32AS2

DM32AST12

DM32AST22 DM32KADT2


Examples:1. SSS 25 5G with one arm-mount fixture and two floodlights on

horizontal arm brackets. Floodlights are to be 180° from each

other, 90° from the shoebox and 12 feet above the base.

2. RTA 30 8G with two arm-mount fixtures at 180°, one floodlight

on a horizontal arm bracket and a 1/2" coupling. Floodlight is

to be opposite hand hole and 6 feet from top of pole. Coupling

should be 10 feet from top, same side as floodlight.

3. SSS 20 4C with a 2-3/8” tenon and festoon outlet 90° left of

the hand hole, 5 feet above the base.

Order as: SSS 25 5G DM19 HA12A HA12C Order as: RTA 30 8G DM28 HA24C 12CP20C Order as: SSS 20 4C T20 FDL5D

Series/Height/Orientation

Series Height Orientation

HA Horizontal arm Height from base in ft. A Side of the pole with the hand hole

FDL Festoon outlet- less electrical Determined by application. B Side of the pole 90° counterclockwise from the hand hole (right)

CPL12 1/2” coupling C Side of the pole 180° counterclockwise from the hand hole (opposite)

CPL34 3/4” coupling D Side of the pole 270° counterclockwise (or 90° clockwise) from the hand hole (left)

CPL1 1” coupling

NPL12 1/2” threaded nipple

NPL34 3/4” threaded nipple

NPL1 1” threaded nipple

EHH Extra hand hole

PT Open top

T20 2-3/8” tenon

T25 2-7/8” tenon

T30 3-1/2” tenon

T35 4” tenon

MAEX Match existing

Notes1 AS denotes Aeris™ luminaire, AST1/AST2 denotes Aeris suspend size 1

or 2 and KADT denotes KAD suspend.

2 Available with round pole only.

3 Reference fixture page for minimum arm length required when mounting 2 or more fixtures at 90°.

Some pole options require designating the orientation from the

hand hole and height from the pole base must be specified when

ordering the pole. The orientation from the hand hole is designated

by the pole sides A, B, C or D. The height on the pole shaft is

designated by the distance from the pole base.

Example: HA12B

POLE ORIENTATION


PRODUCT INFORMATION

LITH

ON

IA O

UTD

OO

R


PO


RBA38

RBA28

15"

15"

12"

30"

30"

12"

SBA38

6"

3"Sq.

2-3/8"O.D.

30"

30"


Projected area is for bracket

only. Bracket projected area is

added to luminaire projected

area to get total effective

projected area (EPA).

All brackets have a maximum

luminaire rating per tenon as

specified in the data table.

Finish: Natural aluminum.

Optional painted finishes

available. Plastic cap supplied.

Brackets mount to T25 tenon

2-7/8" OD, or pole top that is

2-7/8"OD.


ALUMINUMBRACKETSRound Poles Only





area to get total effective

projected area (EPA).

All brackets have a maximum

luminaire rating per tenon as

specified in the data table.

Finish: Natural aluminum.

Optional painted finishes

available.

Plastic cap supplied. Brackets

flush mount on 4", 5" and 6"

square poles. For use with inter-

nal sleeve, plain open-top poles,

Lithonia Lighting poles only.

Must be ordered with pole

to ensure proper fit.

ALUMINUMBRACKETSSquare Poles Only

CATALOG NUMER

BRACKET EPA (FT2)

BRACKET WEIGHT (LBS)

MAX FIXTURE WEIGHT/ARM (LBS)

MAX FIXTURE EPA/ARM @ 80 MPH



RBA28 1.3 8.4 100 6.0 6.0 5.3RBA32 1.7 14.3 100 6.0 6.0 4.8RBA38 2.0 11.9 100 6.0 5.2 4.1RBA48 2.8 16.2 75 3.5 2.6 2.0RBA49 2.2 17.5 100 6.0 6.0 4.8

CATALOG NUMER

BRACKET EPA (FT2)






SBA28-4 0.9 12.0 100 6.0 6.0 6.0SBA28-5 0.9 12.0 100 6.0 6.0 6.0SBA28-6 0.9 12.0 100 6.0 6.0 6.0SBA38-4 1.5 17.0 100 6.0 6.0 6.0SBA38-5 1.5 17.0 100 6.0 6.0 6.0SBA38-6 1.5 17.0 100 6.0 6.0 6.0SBA48-4 2.3 22.0 75 4.0 4.0 4.0SBA48-5 2.3 22.0 75 4.0 4.0 4.0SBA48-6 2.3 22.0 75 4.0 4.0 4.0SBA49-4 1.7 22.0 100 6.0 6.0 6.0SBA49-5 1.7 22.0 100 6.0 6.0 6.0SBA49-6 1.7 22.0 100 6.0 6.0 6.0

RBA48

30"

30"

15"15"

24"

RBA32

41-1/2"

12"

12"

34"24"

RBA49

12"

SBA48

2-3/8"O.D.

30"

30"

3"Sq.

15"15"

6"

SBA49

2-3/8"O.D.

6"34"

24"

3"Sq.

SBA28

2-3/8"O.D.

6"18"

18"

3"Sq.

PRODUCT INFORMATION

LITHO

NIA

OU

TDO

OR


PO

LESOptions & Accessories


CATALOG NUMBER

BRACKET

EPA (FT2)BRACKET

WEIGHT (LBS)

MAX FIXTURE WEIGHT /ARM

(LBS)

MAX FIXTURE EPA /ARM @ 80 MPH

MAX FIXTURE EPA /ARM @ 90 MPH

MAX FIXTURE EPA /ARM

@ 100 MPHBS28 1.0 21.0 150 11.0 8.5 7.3

BS32 1.3 34.0 150 7.2 5.5 4.7

BS38 1.6 32.0 150 7.1 5.5 4.7

BS48 2.3 44.0 125 5.4 4.1 3.4

BS49 1.6 44.0 150 5.3 4.1 3.5




area to get total effective pro-

jected area (EPA). All brackets

have a maximum luminaire

rating per tenon as specified

in the data table.

Finish: Dark bronze, standard.

Other colors available (consult

factory). Plastic cap supplied.

Requires T20 Tenon OD 2-3/8"

– I.D. 2".


CATALOG NUMER

BRACKET EPA (FT2)






SBS28 1.1 30.0 250 13.0 10.2 8.2

SBS38 1.7 42.0 150 8.5 6.6 5.5

SBS49 2.1 45.0 150 6.3 5.0 4.0

STEEL BRACKETS

STEEL BRACKETS

Round Poles Only





area to get total effective pro-

jected area (EPA). All brackets

have a maximum luminaire

rating per tenon as specified

in the data table.

Finish: Dark bronze, standard.

Requires T20 (2-3/8" max OD)

tenon on pole for mounting.

Square Poles Only

Standard Hub

2-3/8" O.D.Tubing

(3) 3/8" x 1/2"set screws @120°

30"

30"

12"

BS48

30"

30"

15"15"

12"

BS32

120°

24"41"

12"

BS49

90°

34"24"

12"

Tenon4" x 2-3/8" Dia.

42"

SBS49

(4)3/8"-16Set Screws

RemovableFront Cap

30"

30"

SBS38

(4) 3/8"-16Set Screws


RemovableFront Cap

36"

12"

RemovableCap

2-3/8" O.D.Tubing

(3) 3/8" x 1/2"set screws @120°

BS28

BS38

30"

SBS28

(4) 3/8"-16Set Screws


RemovableFront Cap

PRODUCT INFORMATION

Terson architectural outdoor lighting is about purposeful design. We create outdoor lighting systems that embody modern yet eclectic looks. Our products emphasize bold statements grounded in clean lines. Our designs flow together seamlessly in a coordinated and relevant manner. Our aim is toward proportional elements that are tied together with elegant simplicity. The result is a fresh set of solutions for both existing and new outdoor lighting applications.

TERSEN

616

www.tersenlighting.com | 1-800-410-4982PSG10 617

TERSEN

We begin all product designs with our eye on both geometric and golden ratio proportion. We carefully combine various elemental shapes to create new product designs that are individually unique, while maintaining an immediate relevance to basic architectural design principles. Our designs incorporate a variety of materials that are uniquely suited to provide the desired visual statement.

Systems: At Tersen, we believe it is paramount to integrate design with delivery of the entire lighting system. Our team simultaneously designs lighting fi xtures, poles and arms to create fl owing visual compositions that blend together in one harmonious statement. Unlike many of our peers, we design and manufacture a complete line of poles, arms and accessories to complement our fi xtures.

Collections: Our portfolio is fi lled with products that are designed to complement one another in both form and function. We strongly encourage the “reuse” of proven components and assemblies among different product families to demonstrate the interrelatedness among them. For instance, our VEO™ and RESONANCE™ products share a common lower assembly that exudes a visual familiarity between two strikingly different products.

Selections: Tersen luminaires are available in a variety of options, color accents and fi nishes. Optical packages deliver superior performance; select from multiple distribution choices with lamp choices ranging from compact fl uorescent, high pressure sodium to metal halide and several LED packages.

Visit TersenLighting.com for additional specifi cation and application information.

PSG101-800-410-8899 | www.tersenlighting.com618

RATIO™The RATIO offers a contemporary-styled, fully cast housing that supports 48 LED diodes which produce illumination equivalent to a traditional 175W metal halide lamp. Its stylistic “finned” design serves both as a heat sink and as an architectural statement. The fixture and pole are sold as a combined unit as the driver (power module) is conveniently mounted at the base of the tilt-down pole for easy installation and maintenance. Available in both symmetric and asymmetric distributions, RATIO is IP65 rated and has the Nighttime Friendly™ designation. VEO™The VEO combines a hint of retro design with a modern overtone on a fully cast lower assembly. The unique design of the upper canopy provides the option of filtered light between the triangular elements to serve as an architectural accent featuring four color options. Available in 50W to 150W MH with high-performance optics, the VEO is IP65 rated, EISA compliant and has the Nighttime Friendly designation.

FACADE™The FACADE neatly accents architectural building design with light framed in basic geometric shapes. It is available in diamond, round and square styles with 10 standard face plates and six accent colors; custom laser-cut faceplates also available. Choose from 50W up to 100W MH, 2/32T. FACADE is IP65 rated, wet location listed and EISA compliant.

PHI™The classic form of the PHI combines a diffused acrylic sphere with a fully cast supporting frame. Designed to illuminate pedestrian-scale environments that require a neo-classical theme, PHI is available in two sizes and lamp wattages of 50W to 150W MH. PHI is IP65 rated and EISA compliant.

RESONANCE™Blending traditional Venetian styling with contemporary accents, the RESONANCE has transformed an iconic design theme into modern lighting. The stately day-form appearance boasts clean lines and is constructed from a fully cast lower assembly and is available in multiple powder paint color options. Available from 50W up to 150W MH with high-performance optics, RESONANCE is IP65 rated, EISA compliant and has the Nighttime Friendly designation.

HIGHLAND PARK™The HIGHLAND PARK Series offers a selection of four Mission-era styles to choose from inspired by the architecture of Frank Lloyd Wright. The clean rectangular lines and overlapping roof are complemented with a selection of four standard face panels. Styles are available with energy-efficient lamping and full cutoff reflectors. The Series is IP65 rated, EISA compliant and has the Nighttime Friendly designation.

The Series features four styles:The Bungalow style offers clean rectangular roof detail that complements both commercial and residential surburban architecture.

steeply pitched roof with an intersecting gable to complement buildings with expansive porches, eyebrow windows and multiple gables.

formal design theme, characterized by its strict rectilinear lines and tailored roof. The disciplined architecture complements government buildings and houses of worship.

structural medium that complements flat or low roofs and long, clerestory- styled windows.

STYLES

SUB

SECT

ION

TER

SEN

STYL

ES O

F FI

XTU

RES

619

Our team designs and manufactures a complete line

of poles, arms and accessories to complement our fi xtures.Our square poles are aluminum with extruded shafts and permanent mold cast bases. The poles are a perfect complement to the Highland ParkTM luminaires. They are available in four shaft sizes: 4”, 5”, 4”- 6” stepped and 5”- 7” stepped. Our aluminum arm is designed to complete the squared styling and can be used on a pole or wall with pendant-mount luminaires.

Our round straight poles have shafts in 4” or 5” diameter with the decorative or plain case bases. All poles are aluminum with a choice of steel for extra strength (available only with the EC simple-based style). The poles are designed with a variety of bases to complete the architectural styling of the circular luminaires. When mounting multiple luminaires, there is a choice of three contemporary arms. The arms are aluminum and fi t onto the appropriate-sized pole tenon and are provided with 3” tenons for luminaire mounting.

620620

Antique Street Lamps offers a wide variety of attractive historical and contemporary outdoor lighting systems with superior optics for nighttime clarity. Products include luminaires, arms, posts, wall brackets, bollards and signage. Typical applications are downtown and urban environments, street lighting, historic districts/renovations, park areas, universities, high-end developments, hotels and resorts. We also specialize in custom projects from replicating historical designs to creating special designs made to fi t an individual project's needs.

ANTIQUE STREET LAMPS

621

CONTENTSCONTEMPORARYLuminaires ........................................................... 622, 624-625 Crossarms and Wall Brackets...............................................626Poles............................................................................623, 627

RAPID-SHIPLuminaires ...........................................................................628Posts....................................................................................629Wall Brackets .......................................................................630Bollards................................................................................630Assemblies...........................................................................631

HISTORICALLuminaires ...........................................................................632Arms ....................................................................................633Posts....................................................................................634Bollards................................................................................635

SIGNAGEBanner Arms ........................................................................636 Street Signs..........................................................................637

ANTIQ

UE STR

EET LAMPS

PSG101-800-410-8899 | www.antiquestreetlamps.com622

Series Lamp type1 Lens Distribution4 Voltage5 Options Finish

OL23 Large luminaire

OL20 Mini luminaire

BLCA BOL10LC Lighted bollard

Metal halide

50M MED 50W

70M MED 70W

100M MED 100W

150M MED 150W2


50S MED 50W

70S MED 70W

100S MED 100W

150S MED 150W2

Metal halide for T6 lamps3

39T6 G12 175W

70T6 G12 250W

LED light3

LED1

GCF Glass, clear flat

Large luminaire

SR2 Type II

SR3 Type III

SR4SC Type IV

SR5S Type V

Mini luminaire and lighted bollard

R2 Type II

R3 Type III

R4 Type IV

R5 Type V

TB1 120V

TB2 208V6

TB3 240V

TB4 277V

120 120V7

277 277V8

347 347V

HS House side shield9

SF Single fusing

DF Double fusing

ANBK Black

ANDB Dark bronze


ANWH White

CM Custom match

CS Custom select RAL colors

CON

TEM

PO

RA

RY

ANTI

QU

E ST

REE

T LA

MP

S

Intended Use

Oslo luminaires and lighted

bollards are designed for

applications where cut-off

performance and contempo-

rary architectural style are

desired. Typical applications

include street lighting,

downtowns, parks, public

areas and mall interiors.

Please refer to our website at

www.antiquestreetlamps.com

for specifications.

Construction

Material: The luminaires

are cast, die-cast and spun

aluminum. The bollard is cast

and extruded aluminum.

Flat lens is manufactured

of clear impact-resistant

tempered glass.

Finish: The luminaires are

finished with a premium

polyester powder coating.

Standard colors are black or

dark bronze.

Optics

Anodized segmented

reflectors are designed for

superior uniformity and con-

trol. Reflectors are available

in four distributions.

Electrical

Luminaires are provided

with quick-disconnect H.I.D.

ballast assemblies. Porcelain

sockets are provided with the

reflector assembly.

Installation

Luminaires are designed

to slip-fit a 3" O.D. x 3" tall

tenon and are secured with

eight set screws. The bollard

is supplied with four 3/4"

diameter, L-type anchor

bolts. Two doors are provided

in the base for anchorage and

wiring access. Luminaires

and bollard roof are hinged

and gasketed for lamp and

reflector access.

Listings

UL Listed to U.S. and


Luminaires are labeled as

suitable for wet locations.

Example: OL23 100M MED GCF SR2 TB1 ANBK

ADDITIONAL INFORMATION For additional product information, visit www.antiquestreetlamps.com.

Luminaire Mini Luminaire Lighted Bollard

OL23 OL20

BLCA BOL10LC

12 dia. x 20 tall23 dia. x 23 tall

12 dia. x 47 tall

w/10 dia. base

“ “

“

“

“

““

Notes1 Lamp not supplied with luminaires or bollard, except for LED.

2 150W only available for large luminaire.

3 Available for mini luminaire and bollard only.

4 LED only available with symmetric distribution. No specification required.

5 Multi-tap ballast (120, 208, 240, 277V), (120, 277, 347V in Canada).


7 120 is available voltage for LED and 39T6 only.

8 277 is available voltage for 39T6 only.

9 Available for SR2, SR3 and R4 luminaire distributions only.

Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions (if provided) are shown in inches unless otherwise noted.

Luminaires

OSLO LUMINAIRES & LIGHTED BOLLARD


PRODUCT INFORMATION

623www.antiquestreetlamps.com | 1-800-410-8899PSG10

AN

TIQU

E STREET LA

MP

SCO

NTEM

PO

RA

RY

Series Height Mounting method Finish

PX OL17 Post

OLC42 Arm

OLCWB Wall bracket

For post only

8

10

12

14

16

For post only

3T3 3" tenon x 3" tall

3T4 3" tenon x 3" tall

ANBK Black

ANDB Dark bronze


ANWH White

CM Custom match


OSLOPost, Arm and Wall Bracket

Intended Use

The posts and arms provide

a contemporary style

to compliment the Oslo

luminaires. Typical applica-

tions include street lighting,





for specifications.

Construction

Materials: The arm and wall

bracket are cast aluminum

one-piece construction.

Posts are cast aluminum and

aluminum pipe, one-piece

construction. Hardware and

fasteners are stainless steel

material. Standard exterior

hardware is of a tamper-

resistant design.

Finish: The posts are finished

with a premium polyester

powder coating. Standard col-

ors are black or dark bronze.

Installation

The arm mounts on a 3" O.D.

x 4" tall tenon and is secured

with set screws. The wall

bracket mounting plate has

four .56" diameter holes for

mounting to the wall. It is

furnished with four 3/8-16

acorn nuts and washers. Wall

studs are furnished by others.

Both arm and wall bracket

have 3" O.D. x 3" tall ten-

ons. The post is provided

with four, 3/4" diameter,

L-type anchor bolts. Four

doors are provided in the

base for anchorage access.

One door is provided at

center for wiring access. At

the top of the post is a 3"

O.D. x 3" or 4" tall tenon for

luminaire or arm mounting.

Example: PX OL17 16 3T4 ANBK


PX OL17 OLC42 OLCWB

Wall bracketCrossarm

PostDrawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions (if provided) are shown in inches unless otherwise noted.

Poles


PRODUCT INFORMATION


CON

TEM

PO

RA

RY

ANTI

QU

E ST

REE

T LA

MP

S

Series Lamp type1 Lens Distribution Voltage4 Options Finish

EC13RT

ES22ST

EH16RT

EM17RT

EH22RT

EM25RT

Metal halide (EC13, ES22, EH16, EM17 only)

50M MED 50W

70M MED 70W

100M MED 100W

150M MED 150W

High pressure sodium (EC13, ES22, EH16, EM17 only)

50S MED 50W

70S MED 70W

100S MED 100W

150S MED 150W

Metal halide (EM25, EH22 only)

175M MOG 175W

250M MOG 250W

400M MOG 400W2

High pressure sodium (EM25, EH22 only)

150S MOG 150W

250S MOG 250W

400S MOG 400W2

All luminaires

GCF Glass, clear fl at

GCSG Glass, clear sag

EC13RT only

ACS Acrylic, clear smooth

PCS Polycarbonate, clear smooth

SR2 Type II

SR3 Type III

SR4SC Type IV

SR4W Type IV3

SR5S Type V

TB1 120V

TB2 208V5

TB3 240V

TB4 277V

347 347V

All luminaires


SF Single fusing

DF Double fusing

EC13RT, H16 & H22 only

1DS Decorative shield

EC13RT only

2DS Two decorative shields

2DD Two decorative discs

ANBK Black

ANDB Dark bronze

ANDG Dark green

ANPP Prime painted

CM Custom match


CONTEMPORARY LUMINAIRES

Intended Use

Luminaires are designed for








Shown here is a sampling of

luminaires available. Please

refer to our website at


for more selections and for

specifi cations.

Construction

Materials: Ballast housings

and skirts are constructed of

cast aluminum. ES22 skirt is

spun aluminum. Flat and sag

lens options are manufac-

tured of clear impact-resis-

tant tempered glass. EC13RT

has a globe of clear acrylic or

polycarbonate.


fi nished with a premium


Standard colors are black,

dark bronze or dark green.

Optics

Anodized segmented

refl ectors are designed for


trol. Refl ectors are available

in fi ve distributions.

Electrical





refl ector assembly.

Installation

Luminaires are designed to

mount to swivel adapters

provided with the contem-

porary arms. See luminaire

specifi cations for appropriate

arm sizes.

Listings





Example: EH16RT 100M MED GCF SR2 TB1 ANBK


EM17RT GCF EM17RT GCSG EH16RT GCF EH16RT GCSG

EH16RT GCF 1DS

EM25RT GCF EM25RT GCSG EH16RT GCF EH16RT GCSG

EC13RT EC13RT 1DS EC13RT 2DS EC13RT 2DDES22ST GCF ES22ST GCSG

Stockholm SeriesCopenhagen Series

Munich Series Hanover Series

Optional Decorative Shield

Optional Decorative Shields

Optional Decorative Discs

Optional Decorative Shield

Notes1 Lamp not supplied with luminaires.

2 Refectors designed for ED28 lamp or E18 lamp.

3 SR4W is only available with EM25 and EH22



6 Available for SR2, SR3 and SR4W only.

Drawings are for dimensional detail only and may not represent actual mechanical confi guration. Dimensions (if provided) are shown in inches unless otherwise noted.

Luminaires


PRODUCT INFORMATION


AN

TIQU

E STREET LA

MP

SCO

NTEM

PO

RA

RY

Series Lamp type1 Lens Distribution Voltage2 Options Finish

Luminaires

BT1 Post-top luminaire



BTSM Side-mount luminaire

Bracket arms

BTA4/1 One-way 4" arm

BTA4/2 Two-way 4" arms

BTA4/3 Three-way 4" arms

BTA5/1 One-way 5" arm

BTA5/2 Two-way 5" arms

BTA5/3 Three-way 5" arms

BTWB Wall bracket arm

Luminaires only

Metal halide

50M MED 50W

70M MED 70W

100M MED 100W

150M MED 150W


50S MED 50W

70S MED 70W

100S MED 100W

150S MED 150W

Luminaires only

GCF Glass, clear fl at

Luminaires only

SR2 Type II

SR3 Type III

SR4SC Type IV

SR5S Type V

Luminaires only

TB1 120V

TB2 208V3

TB3 240V

TB4 277V

347 347V

480 480V

Luminaires only


SF Single fusing

DF Double fusing

ANBK Black

ANDB Dark bronze

ANDG Dark green

ANPP Prime painted

CM Custom match


BRISTOL LUMINAIRES

Intended Use

Luminaires are designed for










for specifi cations.

Construction

Materials: Luminaires are

cast aluminum with a spun

aluminum roof. Flat lens

is manufactured of clear

impact-resistant tempered

glass. Bracket arms and wall

brackets are cast aluminum.






Optics

Anodized segmented

refl ectors are designed for


trol. Refl ectors are available

in four distributions.

Electrical





refl ector assembly.

Installation

Post-top luminaires slip-fi t a

3" O.D. x 3.5" tall tenon. Side-

mount luminaire bracket

arms are designed to slip fi t a

3.375" O.D. x 8" tall tenon for

4" diameter post and a 4.375"

O.D. x 8" tall tenon for 5"

diameter post. Luminaires are

secured with six set screws.

Listings

UL Listed to U.S. and Cana-

dian standards. Luminaires

are labeled as suitable for

wet locations.

Example: BTSM 100M MED GCF SR2 TB1 SF ANBK


Post-top Luminaires Side-mount Luminaires with Post-top Bracket Arms Side-mount Luminaire

with Wall Bracket

BT1

BT2 BT3 BTSM

BTA4/1 OR BTA5/1

BTSM

BTA4/2 OR BTA5/2

BTSM

BTA4/3 OR BTA5/3

BTSM

BTWBOne-way Two-way Three-way

Notes1 Lamps not supplied with luminaires.



4 Available for SR2 and SR3 only.

Drawings are for dimensional detail only and may not represent actual mechanical confi guration. Dimensions (if provided) are shown in inches (centimeters) unless otherwise noted.

Luminaires


PRODUCT INFORMATION


CON

TEM

PO

RA

RY

ANTI

QU

E ST

REE

T LA

MP

S

CONTEMPORARY ARMS & WALL BRACKETS

Series/Size Options Finish

Series Size

EAA 4/1 One-way 4" arm

EAB 5/1 One-way 5" arm

EAC 4/2 Two-way 4" arms

EAE 5/2 Two-way 5" arms

EAH 4WB Small wall bracket

EAJ 5WB Large wall bracket

EAL

Arms only


PE1 NEMA twist-lock photocontrol, 120V, 208V, 240V

PE3 NEMA twist-lock photocontrol, 347V



ANBK Black

ANDB Dark bronze

ANDG Dark green

ANPP Prime painted

CM Custom match


Intended Use

The contemporary arms are

designed for aesthetically

integrating single or mul-

tiple luminaires with posts.

A matching family of wall

brackets provides the abil-

ity to integrate building-

mounted luminaires with

post-mounted site lighting.

Typical applications include

street lighting, down-

towns, parks, public areas

and mall interiors.

Shown here is a sampling

of arms available. Please




specif ications.

Construction

Materials: Arms and wall

brackets are one-piece con-

struction of cast aluminum

and extruded or formed

aluminum. Hardware and




resistant design.

Finish: The arms and wall

brackets are f inished with a

premium polyester powder

coating. Standard colors

are black, dark bronze or

dark green.

Arms and wall brackets are

available in two sizes. The

4" diameter arms are for

the small contemporary

luminaires and 4" diameter

posts. The 5" diameter arms

are for the large contem-

porary luminaires and 5"

diameter posts.

Installation

The arms are designed to

slip-fi t a 3.375" dia. post-top

tenon (4" arms) or 4.375" dia.

post-top tenon (5" arms) and

are secured with eight socket

set screws. The center fi nial

and arm fi nial are removable

to allow for wiring access.

Wall brackets are provided

with four or six 1/2" diameter

holes for mounting to the

wall. Wall bracket mounting

hardware is not provided.

Arms and wall brackets are

provided with swivel adapt-

ers for luminaire mounting.

Optional twist-lock photo

control is installed at center

spool top instead of the fi nial.

Example: EAE5/1 PER PE1 ANBK


EAE4/1 EAE4WB EAE5/2

One-way Wall Bracket Two-way

EAA4/1 EAB4/1 EAC4/1 EAH4/1 EAJ4/1 EAL4/1

Drawings are for dimensional detail only and may not represent actual mechanical confi guration. Dimensions (if provided) are shown in inches unless otherwise noted.

All arm styles are available in both 4" and 5" sizes and as one-ways, two-ways and wall brackets.

Crossarms and Wall Brackets


PRODUCT INFORMATION


AN

TIQU

E STREET LA

MP

SCO

NTEM

PO

RA

RY

Series Height1,2 Shaft Mounting method Finish

EPAX Aluminum contemporary

EPSX Steel contemporary

PX PD18 Aluminum decorative (Philadelphia series)

10

12

14

16

18

20

22

24

26

28

30

S4 Smooth 4"

S4S6 Smooth 4"/6.63"

S5 Smooth 5"

S5S7 Smooth 5"/7"

4 posts

3-3/8T11 Standard tenon

3-3/8T8 Tenon for arm EAL4

5 posts

4-3/8T11 Standard tenon

4-3/8T8 Tenon for arm EAL5

All posts

0T0 No tenon

3T3 3" x 3" tenon

ANBK Black

ANDB Dark bronze

ANDG Dark green

ANPP Prime painted

CM Custom match


Intended Use

Eurotique® poles provide a

contemporary style appear-

ance that is perfectly suited

for use with contemporary

luminaires and arms. Posts

are available in 10-foot to 30-

foot heights. Typical applica-






for specifications.

Construction

Posts are available in either

aluminum or steel, and are


integral anchor/base plate

and two-piece base cover

or one-piece cast aluminum

base with interior anchor

bolts. Aluminum posts are

available as round straight,

4" and 5" or as round

stepped, 4"/6.63" and 5"/7".

Steel posts are available as

round straight, 4" and 5" or

as round stepped, 5"/7".

Materials: Aluminum

poles are manufactured of

extruded aluminum, with

cast aluminum anchor plate

or base, base cover and

handhole cover or access

door. Steel posts are manu-

factured of steel tubing with

steel anchor plates and cast

aluminum base cover and

handhole cover. Hardware

and fasteners are stainless

steel material. Standard

exterior hardware is of a

tamper-resistant design.



powder coating. Standard

colors are black, dark bronze

or dark green.

Installation

The 4", 5" and 4"/6.63" posts

are supplied with four 3/4"


bolts. The 5"/7" aluminum

posts are supplied with four

1" diameter, L-type anchor

bolts. The 5"/7" steel posts

are supplied with four 1-1/4"


bolts. A hand-hole with cover

is provided in the lower shaft

for wiring access for EPAX and

EPSX series posts. PXPD18 is

provided with access door.

Integral tenons are provided

as required for mounting

arms and luminaires.

Example: EPSX 18 S4 3-3/8T11 ANBK


Notes1 Specify height and shaft; see configura-

tions table.

2 Note height limitations for shaft type. Heights above 22' not available for mount-ing twin luminaires. Factory is available to help with loading calculations.EP Series EP Series EP Series EP Series Philadelphia Series

EPAX OREPSX

EPAX OREPSX

EPAX EPAX OREPSX

PX PD18

10-1/2” dia. 11-1/2” dia. 15” dia. 16” dia. 18” dia.

S4

S5

S4S6

S5S7

S4 or S5

Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions (if provided) are shown in inches unless otherwise noted.

CONFIGURATIONS

SERIESS4

HEIGHT (FT.)S5

HEIGHT (FT.)S4S6

HEIGHT (FT.)S5S7

HEIGHT (FT.)EPAX 10, 12, 14, 16, 18 16, 18, 20 20, 22 20, 22, 24, 26EPSX 16, 18, 20 16, 18, 20 N/A 22, 24, 26, 28, 30

PX PD18 10, 12, 14 12, 14, 16, 18 N/A N/A

Poles

CONTEMPORARY POLES


PRODUCT INFORMATION


RAP

ID-S

HIP

ANTI

QU

E ST

REE

T LA

MP

S

Series Bases1 Lamp type Lens

S16

S18

S20

AJ19

AT20

AT23

A21

A25

P36

RGA

RGR

RGR2

DS4

DS7

LT30

LTS30

TR25

TR30

KW35

A

AU

D

E

W

Metal halide

70M MED 70W

100M MED 100W

150M MED 150W

250M MED 250W2


100S MED 100W3

150S MED 150W3

100S MOG 100W

150S MOG 150W

All luminaires except those named below

ACT Acrylic, clear textured

S16, S18 and S20 only

AWS Acrylic white smooth

P36 only

PCT Polycarbonate clear textured

RGA, RGR and RGR2 only

ARF Acrylic refractive

DS4 and DS7 only

(blank) Acrylic refractive

KW35 only

ACS Acrylic clear smooth

AJ19 only

GRF Glass refractive

Distribution Voltage4 Options Finish Rapid-ship program


(blank) Symmetrical distribution

GR5 Glass refractor type V

GR3 Glass refractor type III

RGA, RGR, RGR2 and AJ19

R5 Refractive globe type V

R3 Refractive globe type III

DS4 and DS7 only

SR5S Reflector type V

TB1 120V

TB2 208V5

TB3 240V

TB4 277V

347 347V

FPF Finial for AT, A, RGA or RGR only

FSF Finial for RGA or RGR only

PER Twist-lock photocontrol receptacle6

PE1 NEMA twist-lock PE 120, 208, 240V6

PE3 NEMA twist-lock PE 347V6



ARV MD11 BL21 Cage for RGA, RGR or RGR2 only

ANBK Black

ANDB Dark bronze

ANDG Dark green

RSP

RAPID-SHIP LUMINAIRES

Intended Use

Antique Street Lamps rapid-

ship luminaires provide a

historical style appearance

that is perfectly suited for use

with Antique Street Lamps

posts. Typical applications




Shipping: The rapid-ship

program provides product

shipment within 10 days of

receipt of order. Please refer

to our website at



The specific details about

program terms and condi-

tions, order quantities and

product availability are

shown on our website and

are updated regularly.

Construction

Materials: All luminaire

bases and frames are cast

aluminum. Round domes are

spun aluminum. AJ19 globe

is refractive glass. All other

globes are formed from clear

acrylic or polycarbonate and

are either smooth, textured

or refractive. Hardware and




resistant design.






Electrical

Luminaires are provided with

quick-disconnect H.I.D. bal-

last and socket assemblies.

Installation

Installation: All luminaires

are designed to slip-fit a 3"

O.D. x 3" tall tenon and attach

with set screws.

Listings





Example: A25 AU 100M MED ACT GR5 TB1 PER PE1 ANBK RSP


Luminaires with E Series Base

Sphere Globes Acorn Globes

S16 E S18 E S20 E AJ19 E AT20 E AT23 E A2 1 E AT25 E P36 E

RGA E RGR E RGR2 E

RGA EFPF

RGR EFPF

RGR2 EFSF DS4 E DS7 E

Octagonal

LT30 E LTS30 E

Square

Hexagonal

TR25 TR30

KW35 GR5

Refractive Globes

Cutoff Optics(Shown with optional ARV MD11 BL21 cage and finial)

Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions (if provided) are shown in inches (centimeters) unless otherwise noted.

All luminaires except TR25, TR30 and KW35GRS are shown with the E Series base. Replace the E base with A, AU, D or W base for more luminaire choices. Base AU is available with optional twist-lock photocontrol.

Luminaires

Notes1 Bases not available with TR25, TR30 or KW35.

2 250M only available with S20, AJ19, AT23, A25, P36, RGA, RGR and RGR2 in conjunction with bases A, W or AU. Lamp not supplied with luminaires.

3 Available only with AT20, A21, DS4, DS7, TR25.



6 Optional photocontrols only available with the AU luminaire base.

Luminaire Base Styles

E D A W AU


PRODUCT INFORMATION

AN

TIQU

E STREET LA

MP

S


RAP

ID-SH

IP

Series Size1 Height1 Shaft Mounting method Finish Rapid-ship program

PX Cast aluminum post with extruded shafts

PA Cast aluminum post

PI Cast iron post

KW122

S92

S13

H10

W17

NY17

MO122

CH12

CH16

C20

8

9

10

11

12

13

14

163

PX only

F4 Fluted 4" 3

S4 Smooth 4" 3

F5 Fluted 5"

PA and PI only

(blank) Tapered fluted

3T3 3" O.D. x 3" tall tenon (standard) ANBK Black

ANDB Dark bronze

ANDG Dark green

RSP

Intended Use

Antique Street Lamps

rapid-ship posts provide a


that is perfectly suited for

use with Antique Street

Lamps luminaires. Posts

are available in 10-foot to

16-foot heights. Typical

applications include street

lighting, downtowns,

parks, public areas and

mall interiors.




receipt of order. Please



for more information. The

specific details about pro-

gram terms and conditions,

order quantities and product

availability are shown on

our website and are updated

regularly.

Construction

All posts are fabricated as

one-piece construction. The

shafts are telescoped into the

bases and double-welded

for maximum structural

integrity. An integral 3" O.D.

x 3" tall tenon is provided for

luminaire mounting.

Materials: The post bases

are cast aluminum or cast

iron. Aluminum posts have

4" or 5" diameter fluted or 4"

diameter smooth extruded

aluminum, or cast tapered

fluted shafts. Cast iron

posts have cast tapered

fluted shafts. Hardware and




resistant design.





or dark green.

Installation

Posts are provided with four,

hot-dip galvanized, 3/4"

L-type anchor bolts. A door is

provided in the base for an-

chorage and wiring access. A

grounding screw is provided

inside the base, accessible

from the door.

Example: PX CH16 14 F5 3T3 ANBK RSP


CONFIGURATIONSSERIES SIZE HEIGHT (FT.)

PX KW12, S9, S13, H10, W17, NY17, MO12, CH12, CH16 10, 12, 14, 16PA W17 8, 10, 12PA NY17 9, 11, 13PI NY17 10, 13PI C20 10, 12

Notes1 Specify size and height,

see Configurations table.

2 KW12, S9 and MO12 series posts only available with F4 or S4 shaft.

3 F4 and S4 shafts are not available in 16' height.


Posts

RAPID-SHIP POSTS


PRODUCT INFORMATION


RAP

ID-S

HIP

ANTI

QU

E ST

REE

T LA

MP

S

Series Finish Rapid-ship program

PCPWB

ACAWB

ANBK Black

ANDB Dark bronze

ANDG Dark green

RSP

PRODUCT INFORMATION

RAPID-SHIP WALL BRACKETS

Intended Use


ship wall brackets provide a


that is perfectly suited to

match Antique Street Lamps

light posts. Typical applica-










for specific details about pro-



availability.

Construction

Wall brackets are fabricated

as one-piece construction.

Materials: Wall brackets

are cast aluminum with an

aluminum mounting plate.

Hardware and fasteners are

stainless steel material. Stan-

dard exterior hardware is of a


Finish: The wall brackets are





Installation

Wall brackets have four 9/16"

diameter holes for mounting

to the wall. Hardware

furnished by others.

Family Series Finish Rapid-ship program

BCA Cast aluminum bollards BCH12DT

BCH12BT

BNY17DT

BNY17BT

ANBK Black

ANDB Dark bronze

ANDG Dark green

RSP

Example: PCPWB ANBK RSP


PRODUCT INFORMATION Bollards

RAPID-SHIP BOLLARDS

Intended Use


rapid-ship bollards provide

a historical style appearance

that is perfectly suited to

match Antique Street Lamps

light posts. Typical applica-







receipt of order. Please refer

to our website at


for specific details about pro-



availability.

Construction

All bollards are fabricated as


Materials: Bollards have

shafts of 5" diameter fluted

extruded aluminum with

cast aluminum bases and

tops. Hardware and fasteners

are stainless steel material.

Standard exterior hardware is

of a tamper-resistant design.

Finish: Bollards are finished




or dark green.

Installation

Bollards are provided with

four, hot-dip galvanized, 3/4"

L-type anchor bolts. A door

is provided in the base for

anchorage access.

Example: BCA BCH12DT ANBK RSP


Dome Top Ball Top Dome Top Ball Top

BCA BCH12DT BCA BCH12BT BCA BCH17DT BCA BCH17BT

New York SeriesChicago Series

12” dia. 17” dia.



Wall Brackets

PCPWB ACAWB



PRODUCT INFORMATION

AN

TIQU

E STREET LA

MP

S


RA

PID

-SHIP

RAPID-SHIP CONTEMPORARY

LIGHTING POST ASSEMBLIES

Intended Use


ship lighting assemblies

provide a contemporary

styling with full-cutoff,

high- performance optics.

Two size assemblies avail-

able in 16-, 18- and 20-foot

heights with single or twin

arm options. Typical applica-











Construction

Materials: Posts are steel

construction with a 4" or

5" shaft and an aluminum

two-piece base cover. Arms

are one-piece aluminum and

cast aluminum construction.

Luminaires are cast alumi-

num with a clear glass flat

lens. Hardware and fasteners








or dark green.

Optics

Luminaires utilize high-

performance reflectors in

type 3 distribution.

Electrical


quick-disconnect H.I.D. ballast

and socket assemblies.

Installation


hot-dip galvanized, 3/4" L-type

anchor bolts and a handhole

with cover for wiring access.

Arms slip-fit the post tenon

and are secured with eight

socket set screws. Luminaires

mount securely to the arm

plumb device and are provided

with a hinged and gasketed

lens ring with captive screw for

easy lamp access.

Listings





Series Height Shaft Mounting method Arms Options Luminaires Lamp type1

EPSX 16

18

20

Small assembly

S4

Large assembly

S5

Small assembly

3-3/8T8 Tenon size

Large assembly

4-3/8T8 Tenon size

Small assembly

EAL4/1

EAL4/2

Large assembly

EAL5/1

EAL5/2

Arm options

PER Twist-lock photocontrol receptacle

PE1 NEMA twist-lock PE 120, 208, 240V

PE3 NEMA twist-lock PE 347V



Small assembly

EM17RT

EM17ST

EM17FT

Large assembly

EM25RT

EM25ST

EM25FT

Metal halide (small assembly only)

50M MED 50W

70M MED 70W

100M MED 100W

150M MED 150W

Lamp type1 (continued) Lens Distribution Voltage3 Finish Rapid-ship program

High pressure sodium (small assembly only)

50S MED 50W

70S MED 70W

100S MED 100W

150S MED 150W

Metal halide (large assembly only)

175M MOG 175W

250M MOG 250W

400M MOG 400W2

High pressure sodium (large assembly only)

150S MOG 150W

GCF Glass, clear flat SR3 Type III TB1 120V

TB2 208V4

TB3 240V

TB4 277V

347 347V

ANBK Black

ANDB Dark bronze

ANDG Dark green

RSP

Example: EPSX 16 S4 3-3/8T8 EAL4/1 PER PE1 EM17FT 100M MED GCF SR3 TB1 ANBK RSP


Notes1 Lamp not supplied with luminaires.

2 Reflectors designed for ED28 lamp.



S55" dia. Smooth Shaft

S44" dia. Smooth Shaft

EPSX EPSX

EAL5/1

EM25FTEAL4/1

EM17FT

PostsDrawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions (if provided) are shown in inches (centimeters) unless otherwise noted.

Assemblies

Luminaires

Ringed Top Smooth Top Fluted Top

Small

Large

Arms

EAL5/2

EAL4/2EM17RT EM17ST EM17FT

EM25RT EM25ST EM25FT


PRODUCT INFORMATION


Series Base Lamp type Lens Distribution

Available with base

AT23

A25

P36

TL26

LT30

RGT

RGA

RGR

RGC

DS4

DS7

DS8

DS10

Not available with base

TR30

KW35

FM44

G36

DS3

DS2

BH27

CM28P32

VG31C33

HLT30

A

AU

D

E

K

W

Metal halide

70M MED 70W

100M MED 100W

150M MED 150W

250M MOG 250W1


70S MED 70W

100S MED 100W2

100S MOG 100W3

150S MED 150W2

150S MOG 150W3

250S MOG 250W1


ACT Acrylic clear textured

P36 only

PCT Polycarbonate clear textured

BH27, CM28, VG31 and all RGs only

ACS Acrylic clear smooth

DS4, DS8 and DS7 only

(blank) Acrylic refractive

G36, KW35, DS3 and DS2 only

ARF Acrylic refractive


GR5 Glass refractor type V


All RGs only

R5 Refractive globe type V

R3 Refractive globe type III

DS2-DS8 only

SR2 Refl ector type II

SR3 Refl ector type III

SR4SC Refl ector type IV

SR5S Refl ector type V

Distribution (continued) Voltage4 Options Finish

DS10 only

TY5 Refl ector type V

VLR5, CM28 and VG31 only

VLR5 Vertical lamp refl ector type V

VLR3 Vertical lamp refl ector type III

CM28 and VG31 only

HLR Horizontal refl ector type III

TB1 120V

TB2 208V5

TB3 240V

TB4 277V

347 347V

FPF Finial for AT, A and all RGs only

PEB1 Photoelectric cell button 120V

PEB2 Photoelectric cell button 208, 240, 277V

PER Twist-lock photocontrol receptacle6

PE1 NEMA twist-lock PE 120, 208, 240V6




ANBK Black

ANDB Dark bronze

ANDG Dark green

ANPP Prime painted

CM Custom match


HIS

TOR

ICA

LAN

TIQ

UE

STR

EET

LAM

PS

HISTORICAL LUMINAIRES

Intended Use


luminaires provide a his-

torical style appearance that

is perfectly suited for use with

Antique Street Lamps posts.

Typical applications include

street lighting, downtowns,

parks, public areas and mall

interiors. Shown here is a sam-

pling of luminaires available.




specifi cations.

Construction

Materials: All luminaire bases

and frames are manufactured

from heavy-wall, low-copper,

cast aluminum. Round domes

are spun aluminum or cast

aluminum. Hardware and




resistant design.






Optics

Globes are formed from clear

acrylic or polycarbonate and

are either smooth, textured

or refractive. DS series

luminaires with cutoff optics

utilize anodized segmented

refl ectors available in four

distributions. Optional glass

refractors in type V or III

distributions are available.

Electrical




Installation

All post-top luminaires are

designed to slip-fi t a 3"

O.D. x 3" tall tenon and are

secured with set screws.

All pendant/roadway

luminaires are designed to

mount to the roadway arms

plumbing device.

Listings





Example: A25 AU 100M MED ACT GR5 TB1 PER PE1 ANBK


Notes1 250W only available with AT23, A25, P36, TL26, LT30,

and all RGs in conjunction with bases A, W or AU and all pendant luminaires. Lamp not supplied with luminaires.

2 Available only with DS luminaires.

3 Not available with DS luminaires.

4 Multi-tap ballast (120, 208, 240, 277V), (120, 277, 347V

in Canada).


6 Optional photocontrols only available with the AU luminaire base.

Square

Hexagonal

Round

TR30

KW35 FM44

G36

OctagonalAcorn Globes Acorn Globes with Frames

AT23 E A25 W P36 E TL26 A LT30 D

Refractive Globes

RGT A RGA E FPF RGR AU FPF RGC D FPF


Luminaires

E D K A W AU

Luminaire Base Styles

Pendant/Roadway Luminaires

Hexagonal

Round

BH27 CM28P32

VG31C33 HLT30

Round

Octagonal HexagonalRound

DS10K DS3 DS2

DS4 K DS7 K DS8 K

Refractive Globes

Post-top Luminaires Cutoff Optics (DS)

Most luminaires above use base selections. Replace bases shown in iluustrations with any above. Base AU is available with optional twist-lock photocontrol.


PRODUCT INFORMATION

AN

TIQU

E STREET LA

MP

S


HISTO

RICA

L

Series Finish

For post top luminaires

CCA24

ACA30

ASC30

PCP36

RT39

LB33

WTA28

For pendant luminaires

ELC27/1

WLC72/1

GAC48/1

CVC27/1

ANBK Black

ANDB Dark bronze

ANDG Dark green

ANPP Prime painted

CM Custom match


HISTORICAL ARMS

Intended Use

Antique Street Lamps arms

provide a historical style

appearance that is perfectly

suited for use with Antique

Street Lamps luminaires and

posts. Typical applications





of arms available. Please




specifi cations. Arms may also

be available as four-ways,

three-ways, two-ways, one-

ways and as wall brackets.

See website for availablity.

Construction

All arms are fabricated as


Integral 3" O.D. x 3" tall

tenons are provided for post-

top luminaire mounting. A

plumbing device is provided

for mounting and leveling

the pendant luminaires.

Materials: The arms are cast

aluminum and extruded

aluminum. Removable cast

fi nials are provided at the

center for wiring access.

Hardware and fasteners are

stainless steel material. Stan-

dard exterior hardware is of a


Finish: The arms are fi nished




or dark green.

Installation

Arms slip-fi t a post tenon and

are secured with socket set

screws. Appropriate tenon

sizes vary for each arm. See

sizes below.

Example: CCA24 ANBK


Post-top Arms for Post-top Luminaires

Post-top Roadway Arms for Pendant Luminaires

CCA24 ACA30 ASC30 PCP363” O.D. x 3” tall tenon 3” O.D. x 5” tall tenon 3” O.D. x 4” tall tenon 3” O.D. x 5” tall tenon

RT39 LB33 WTA284” O.D. x 6.25” tall tenon 3” O.D. x 6” tall tenon 3” O.D. x 9” tall tenon

ELC27/1 WLC72/1 GAC48/1 CV27/13” O.D. x 12” tall tenon3” O.D. x 12” tall tenon3” O.D. x 9” tall tenon3” O.D. x 9” tall tenon


Arms


PRODUCT INFORMATION


HIS

TOR

ICA

LAN

TIQ

UE

STR

EET

LAM

PS

Series Size1,2 Height2 Shaft Mounting method4 Finish

PX Cast aluminum post with extruded shafts

PI Cast iron post

PZ Cast iron and steel post

W17

NY17

CH12

C20

PD18

KW20

H16

FW18

C24

NY20

6

7

8

10

12

13

14

15

163

17

18

20

21

22

23

PX only

F4 Fluted 4" 3

S4 Smooth 4" 3

F5 Fluted 5"

S5 Smooth 5"

PI and PZ only

(blank) Tapered fluted

3T3 3" O.D. x 3" tall tenon (standard)

3T4 3" O.D. x 4" tall tenon

3T5 3" O.D. x 5"tall tenon




4T6-1/4 4" O.D. x 6-1/4" tall tenon

ANBK Black

ANDB Dark bronze

ANDG Dark green

ANPP Prime painted

CM Custom match


HISTORICAL POSTS

Intended Use

Antique Street Lamps posts

provide a historical style

appearance that is perfectly

suited for use with Antique

Street Lamps luminaires.

Posts are available in alumi-

num, cast iron, and cast iron

and steel in 8-foot to 23-foot

heights. Typical applications





of posts available. Please




specifications.

Construction

All posts are fabricated as

one-piece construction. An

integral 3" O.D. x 3" tall tenon

is provided for standard

luminaire mounting. Arms

may use different size tenons.

See arm specifications for

appropriate sizes.

Materials: The post bases are

cast aluminum or cast iron.

Aluminum posts have 4" or

5" diameter fluted or smooth

extruded aluminum, or cast

tapered fluted shafts. Cast

iron posts have cast tapered

fluted shafts. Cast iron and

steel posts have tapered and

fluted steel shafts. Hardware

and fasteners are stainless

steel material. Standard

exterior hardware is of a






or dark green.

Installation


hot-dip galvanized, 3/4"






through the door.

Example: PX CH12 14 F4 3T3 ANBK



CONFIGURATIONSSERIES SIZE HEIGHT (FT.)

PX CH12, W17, NY17, PD18, KW20 8, 10, 12, 14, 16PI H16 10, 12, 14PI FW18 6, 7, 10, 12, 13, 15PI C20 10, 12, 13, 15PZ C24 12, 13, 15, 17, 20, 22PZ NY20 13, 14, 16, 18, 21, 23

Posts

Notes1 Specify size and height, see configuration table.

2 Factory is available to help with loading calculations.

3 F4 and S4 shafts are not available in 16' height.

4 Check luminaire or arm specifications for proper tenon size.


PRODUCT INFORMATION

AN

TIQU

E STREET LA

MP

S


HISTO

RICA

L

Series Size Lamp type1 Lens

BLCA Cast aluminum lighted bollards

BLCI Cast iron lighted bollards

BCA Cast aluminum bollards

BCI Cast iron bollards

BLCA only

BW14DTL

BCH12DTL

BNY17DTL

BH10L

BC13L

BLCI only

BC13L

BNY20L

BCA only

BW14DT

BCH12DT

BNY17DT

BH10

BC13

BCI only

BC13

BNY20

BLCA and BLCI only

Metal halide

50M MED 50W

70M MED 70W

100M MED 100W


50S MED 50W

70S MED 70W

100S MOG 100W

Shaft-mounted optics2

GWS Glass, white smooth

Top-mounted optics3

ACS Acrylic, clear smooth

AWS Acrylic, white smooth

Distribution3 Voltage4 Options Finish

(blank) Std. low brightness refl ector type V


GRS Glass refractor type V

BLCA and BLCI only

TB1 120V

TB2 208V5

TB3 240V

TB4 277V

347 347V

EBB One eyebolt

2EBB Two eyebolts

ANBK Black

ANDB Dark bronze

ANDG Dark green

ANPP Prime painted

CM Custom match


HISTORICAL BOLLARDS

Intended Use

All bollards are fabricated as


removable top for optical

access where applicable.

Materials: Bollards are cast

aluminum or cast iron.

Aluminum bollards have

shafts of 5" diameter fl uted

extruded or cast fl uted alu-

minum with cast bases and

tops. Cast iron bollards are all

cast. Hardware and fasteners




Finish: The bollards are





Optics

Lenses are white smooth

glass inside the extruded

aluminum shafts or acrylic

with choice of clear or white

in top-mounted optics. Lumi-

naires provide a symmetrical

distribution. Optional glass

refl ectors with type V or III

distributions are available

with bollards with top-

mounted optics.

Electrical




Installation

Bollards are provided with

four, hot-dip galvanized, 3/4"






through the door.

Listings





Example: BLCA BH10DTL 100M MED ACS GR5 TB1 EBB ANBK


Notes1 Lamp not supplied with bollards.

2 BW14DTL, BCH12DTL and BNY17DTL only.

3 BH10L, BC13L and BNY20L only.



BCA BW14DT BLCA BW14DTL BCA BCH12DT BLCA BCH12DTL BCA BNY17DT BLCA BNY17DTL BCA BH10 BLCA BH10L

Chicago SeriesWashington Series New York Series Hartford Series

12” dia. 17” dia.

Capital Series

20” dia.

Cast Aluminum

Cast Iron or Cast Aluminum

12” dia. 10” dia.

Cast Iron

13” dia.

New York Series

BCI BC13BCA BC13

BLCI BC13LBLCA BC13L

BCI BNY20 BLCI BNY20L

Lighted with

Shaft-mounted OpticsLighted with

Shaft-mounted Optics

Lighted with

Shaft-mounted Optics

Lighted with

Topt-mounted Optics

Lighted with

Topt-mounted Optics

Cast Aluminum Cast Aluminum Cast Aluminum


Bollards


PRODUCT INFORMATION


SIG

NAG

EAN

TIQ

UE

STR

EET

LAM

PS

Series Clamp diameter1 Arms Eyebolts Eyebolt clamp diameter1 Finish

Bolt-on

BAB 1 banner arm

2BAB 2 banner arms

3BAB 3 banner arms

4BAB 4 banner arms

One set clamp-on

BAC19 1 arm

BAC28 2 @ 180°

BAC29 2 @ 90°

Two sets clamp-on

2BAC19 1 arm

2BAC28 2 @ 180°

2BAC29 2 @ 90°

BACD3 3" Ø

BACD3-1/2 3.5" Ø

BACD4 4" Ø

BACD4-1/2 4.5" Ø

BACD5 5" Ø

BACD5-1/2 5.5" Ø

BACD6 6" Ø

BACD6-1/2 6.5" Ø

BACD7 7" Ø

BACD7-1/2 7.5" Ø

BACDTBS Ø to be specified

12H4 1"Ø, 12" long

18H4 1"Ø, 18" long

24H4 1"Ø, 24" long

30H4 1"Ø, 30" long

36H4 1"Ø, 36" long

Bolt-on

EBB 1 eyebolt

2EBB 2 eyebolts

3EBB 3 eyebolts

4EBB 4 eyebolts

One set clamp-on

EBC19 1 eyebolt

EBC28 2 @ 180°

EBC29 2 @ 90°

Two sets clamp-on

2EBC19 1 eyebolt

2EBC28 2 @ 180°

3EBC29 2 @ 90°

EBCD3 3" Ø

EBCD3-1/2 3.5" Ø

EBCD4 4" Ø

EBCD4-1/2 4.5" Ø

EBCD5 5" Ø

EBCD5-1/2 5.5" Ø

EBCD6 6" Ø

EBCD6-1/2 6.5" Ø

EBCD7 7" Ø

EBCD7-1/2 7.5 " Ø

EBCDTB S Ø to be specified

ANBK Black

ANDB Dark bronze

ANDG Dark green

ANPP Prime painted

CM Custom match


SIGNAGEBanner Arms

Intended Use

Antique Street Lamps banner

arms allow the ability to add

banners to Antique Street

Lamps light posts. Typical


lighting, downtowns, parks,

public areas and mall interiors.

Shown here is a sampling of

banner arms available. Please




specifications.

Construction

Materials: The banner arms

are extruded aluminum.

Removable cast finials are

provided at the end for

banner placement. Bottom

eyebolts are recommended

because of the wind load of

the banner.

Finish: The banner arms are





Installation

Banner arms have the option

of either a plate to bolt on

to the post mounting pad,

or a clamp to clamp around

the post.

Example: BAC19 BACD4 24H4 EBC19 EBCD4 ANBK


Banner Arms

BABBolt-on Mounting

Eyebolt EBBBolt-on Mounting

SampleBannerMounting(banner byothers)


Notes1 For clamp-ons only.

Banner Arms


PRODUCT INFORMATION

AN

TIQU

E STREET LA

MP

S


SIGN

AGE

Series Clamp diameter1 Finish

Bolt-on mounting street signs

SS1B 1 sign frame

2SS1B 2 sign frame

Clamp-on mounting street signs

SS1C19 1 sign frame

SS1C29 2 sign frames @ 90°

Post-top mounting street signs

SSIP 1 sign frame

SSIP29 2 sign frames @ 90°

Clamp-on mounting traffic signs

STO30C Frame for 30" octagonal sign

STR3612C Frame for 36" x 12" rectangular sign

STR1824C Frame for 18" x 24" rectangular sign

Post top mounting traffic signs

STO30P Frame for 30" octagonal sign

STR3612P Frame for 36" x 12" rectangular sign

STR1824P Frame for 18" x 24" rectangular sign

Street signs

SSCD3 3" Ø

SSCD3-1/2 3.5" Ø

SSCD4 4" Ø

SSCD4-1/2 4.5" Ø

SSCD5 5" Ø

SSCD5-1/2 5.5" Ø

SSCD6 6" Ø

SSCD6-1/2 6.5" Ø

SSCD7 7" Ø

SSCD7-1/2 7.5" Ø

SSCDTBS Ø to be specified

Traffic signs

STCD3-1/2 3.5" Ø

STCD4 4" Ø

STCD3 3" Ø

STCD4-1/2 4.5" Ø

STCD5 5" Ø

STCD5-1/2 5.5" Ø

STCD6 6" Ø

STCD6-1/2 6.5" Ø

STCD7 7" Ø

STCD7-1/2 7.5" Ø

STCDTBS Ø to be specified

ANBK Black

ANDB Dark bronze

ANDG Dark green

ANPP Prime painted

CM Custom match


SIGNAGESign Frames

Intended Use

Antique Street Lamps sign

frames and banner arms allow

the ability to add signs and

banners to Antique Street

Lamps light posts. Typical


lighting, downtowns, parks,

public areas and mall interiors.


of sign frames and banner

arms available. Please




specifications.

Construction

Material: Sign frames are

one-piece cast aluminum with

a solid backing and a 1" wide

border. Hardware and fasteners


Finish: The sign frames are





Installation

Street sign frames have the

option of bolt-on, clamp-on

or post-top mounting. Traffic

sign frames have the option

of clamp-on or post-top

mounting. The post-top

version mounts on a 3" x 3"

O.D. tenon and is secured

with six socket set screws.

Bolt-on mountings will need

an orientation drawing for

the post. Contact the factory

for details.

Example: STR3612C STCD4 ANBK


Street Signs Traffic Signs

SS1B

SS1C19

SS1P

ST030C

ST030P

STR3612C

STR1824C

Frame for 36” x 12”

Rectangular Sign with

Clamp-on Mounting

Frame for 18” x 24”

Rectangular Sign with

Clamp-on Mounting

Frame for 30”

Octagonal Sign

Clamp-on Mounting

Post Top Mounting

Clamp-on Mounting

Post Top Mounting

Bolt-on Mounting

Frame for 30” x 6” Oval Sign


Street Signs

Notes1 For clamp-ons only.


PRODUCT INFORMATION

Hydrel was launched with a mission: to make the most reliable underwater lighting the world has ever seen. This was no small task, since water is a hostile environment for lighting. But we accomplished it, and in the ensuing decades as we’ve moved up onto land, the company has continued to build its expanding lines of outdoor lighting products the same way. Rugged. Impenetrable. Uncommonly reliable. One thing is certain: Hydrel products are engineered to outperform anything on the market. It is in our DNA, and customers couldn’t be happier.

Indianapolis Airport | ©2009 Hydrel JW Marriott | Gary Steffy Lighting Design Inc. | ©2009 Kevin Beswick Bay St. Louis Bridge | HNTB Corporation | ©2009 Mark McCabe

First Citizens Bank | Cline Bettridge Lighting Design | ©2009 Robert Benson

HYDREL

638

HYD

REL

639

CONTENTSIN-GRADEFlow-Through In-Grade................................................ 640-644Accessories..................................................................645, 652 Sealed In-Grade ................................................... 646-651, 653Wet-Dry In-Grade.................................................................654Technical Information...........................................................655Well Lights................................................................... 656-659

FLOODFloodlighting.........................................660-663, 665-667, 671Accessories..................................................................664, 668Linear Floodlighting ..................................................... 672-674

MOUNTING ACCESSORIES .....................669-670, 675-677

LANDSCAPE LIGHTINGAccent Lighting ............................................................ 678-685

STEP & BORDERStep Lights................................................................... 686-688Border Lights ............................................................... 689-692

BOLLARDS ................................................................ 693-694

AREA & WALL MOUNTEDPole Mounted.......................................................................695Building Mounted ........................................................ 696-698Site & Area Lighting.............................................................699

UNDERWATERFountain & Refl ecting Pool Fixtures ............................. 700-704Swimming Pool Fixtures ......................................................705Accessories.................................................................. 706-707

HYD

REL

PSG101-800-750-9773 | www.hydrel.com640

IN-G

RA

DE

Series20 Material Lamp type Voltage Distribution5 Lens

M9410 Round single lens

M9420 Round double lens

M9430 Square single lens

M9440 Square double lens

A Aluminum

B Bronze

SS Stainless steel

Low voltage2

M35

M50

M75

P3650ILV

P3675ILV

Incandescent3

P1675I

P2050I

P3075I

100Q

Fluorescent6

18TRT

26TRT

32TRT

Ceramic metal halide

35CMT47, 18

35CMT67

70CMT47, 18

70CMT67

P2035CM

P3035CM

P3070CM

122

120

208

240

277

347

MVOLT4

VNSP Very narrow spot

NSP Narrow spot

SP Spot

MFL Medium flood

NFL Narrow flood

FL Flood

WFL Wide flood

VWFL Very wide flood

WWD Wall wash distribution

ASY Asymmetrical

CLC Convex lens clear

CLF Convex lens frosted

FLC Flat lens clear

FLC5 Flat lens clear, 5° axial spread

FLC10 Flat lens clear, 10° tilt


FLSR Flat lens, slip resistant

FLCAS Flat lens clear, anti-slip

FLF Flat lens frosted

Conduit entry Options Lamped Finish17

12B 1/2" NPT bottom

12S 1/2" NPT side

34B 3/4" NPT bottom19

34S 3/4" NPT side

Internal accessories10

IHL Honeycomb louver

ISS Source shield8

LSF Linear spread filter

CFAMB Color filter amber

CFBLU Color filter blue

CFGRN Color filter green

CFRED Color filter red

WWL Wall wash louver9

External accessories10

GS Glare shield

LC Lexan cover

RG Rock guard11

Trims10

BTR Bronze round

BTS Bronze square

STR Stainless round

STS Stainless square

Fusing

SF Single fuse12

DF Double fuse13

Ballasts14

GEB Electronic ballast15

MLEBAD Electronic dimming ballast16

LP Lamp installed BL Black

BZ Bronze

DDB Dark bronze


GN Green

GR Gray

SND Sand

STG Steel gray

TVG Terra verde green

WH White

CF Custom

M9400Intended Use

The M9400 Series modular

in-grade lights are multi-

purpose units designed for

flush mounting in a variety

of substrates or materials.

The M9400 fixtures are used

to uplight architectural and

landscape features.

Construction

Door material: Cast aluminum,

cast bronze or stainless steel.

Round or square with two

stainless steel captive fasten-

ers that lock the lamp module

into the rough-in section.

Lamp module: Stainless steel,

sealed and purged of all mois-

ture with silicone gaskets,

stainless steel clamp band

and single fastener. Electrical

connection to lamp module

is done through submersible

connector with gold-plated

contacts. Lamp included.

Rough-in section: Injec-

tion- molded polymer with

integral junction box

for branch wiring (25

cubic inches/410ccm), U.V.

stabilized, impact- and

corrosion-resistant for use

in all types of environments.

Houses power module, lamp

modules and finishing com-

ponents. Adjustment ring

provides 360° aim rotation

with keyed section to receive

lamp module. Ring locks into

position with stainless steel

fasteners. RIS has a cylinder/

vault configuration.

Double lens: Includes 360°

Aim-Lock™ module support

ring, door assembly, tilt ring,

and module indexing seg-

ment providing maintenance

and relamping without

re-aiming. The lamp module

is suspended below the door

lens in a surface-adjustable,

15° tilt mechanism. The

insulating air layer reduces

surface temperatures. The

lenses are clear tempered

flat glass.

Electrical

Power module: Ballast is

encapsulated in a custom-

designed heat-dissipating

epoxy resin to eliminate

all moisture intrusion to

the ballast. Provided with

submersible rated cord/

connector for connection to

integral junction box and

lamp module. HID ballasts

are magnetic.

Electrical entries/junction

box: bottom or side entries

available. Box suitable for

through-branch wiring.

Splicing volume is 25 cubic

inches (410 ccm).

Listings

U.L., C.U.L., IP68, CE, NEMKO.

Example: M9420 B 70CMT6 MVOLT NSP FLC 34B ISS RG GEB LP

ADDITIONAL INFORMATION For additional product information, visit www.hydrel.com.

Notes1 Not available with M9430 and M9440.

2 If 12V is selected, transformer will not be provided.

3 Only available in 120V.

4 MVOLT is only available with fluorescent and metal halide lamps with electronic ballasts.

5 All distributions not available with all lamp types.

6 Available distributions are MFL, WWD and ASY.

7 Available distributions are NSP and MFL for T6; NSP, MFL and WWD for T4.

8 Not available with PAR, MR or fluorescent lamps.

9 Only valid with WWD distribution.

10 Accessories are mutually exclusive. Only RG and GS can be ordered together. External options and trims not available with SS doors.

11 RG is not valid with CLC or CLF lenses.

12 SF available with 120V, 277V or 347V and HID only.

13 DF available with 208V, 220V or 240V and HID only.

14 Only available with metal halide lamps and MVOLT voltage.

15 Standard on CMT4 lamps.

16 For use with 0-10V analog dimmer (by others). Additional electrical conductors are required. Consult Hydrel for details.

17 Finish only available on aluminum doors.

18 Lamps available with GEB or MLEBAD electronic MVOLT only.

19 Default conduit entry.

20 For lens load ratings, slip resistance and temperatures, see page 655.

Flow-Through In-Grade


16(40.6)9

(22.9)

12-1/4(31.1)

14-1/2(36.8)

19-1/2(49.5)


Incandescent, Low voltage, Fluorescent

HID

PRODUCT INFORMATION

HYD

REL

641www.hydrel.com | 1-800-750-9773PSG10

IN-G

RA

DE

Series8 Material Lamp type Voltage LED color Distribution Lens7





A Aluminum

B Bronze

SS Stainless steel

12LED MVOLT CLW Cool white

CLWHO Cool white - high output

WMW Warm white

AMB Amber

BLU Blue

GRN Green

RED Red

RBL Royal blue

SP Spot

MFL Medium flood

LSD Linear spread

WFL Wide flood



FLC Flat lens clear







12B 1/2" NPT bottom

12S 1/2" NPT side


34S 3/4" NPT side


IHL Honeycomb louver

LSF Linear spread filter3

External accessories2, 4

GS Glare shield

LC Lexan cover

RG Rock guard

Trims2, 4

STS Stainless square

BTR Bronze round

BTS Bronze square

STR Stainless square

LP LED array installed BL Black

BZ Bronze

DDB Dark bronze


GN Green

GR Gray

SND Sand

STG Steel gray


WH White

CF Custom

M9400Monochromatic LED

Intended Use

Hydrel's M9400 series

modular in-grade lights are

multi-purpose units designed

for uplighting architectural

and landscape features.

Construction

Door material: Cast alumi-

num, cast bronze or stainless

steel. Available in round or

square door trim.

Finish: Finish is natural alu-

minum or bronze. Stainless

steel door is brushed finish.

Aluminum doors may be

painted. See ordering guide

for color options.

Finishing section: Single or

double lens design includes

door assembly with 360°

Aim-Lock™ lamp module sup-

port ring. Module indexing

provides easy maintenance

and relamping without re-

aiming. Active optical lenses

also are available. Door trim

locks into position with

two stainless steel captive,

tamper-resistant fasteners.

Rough-in section: Injec-

tion- molded polymer with

integral junction box for

through- branch wiring. The

housing is U.V. stabilized,

impact- and corrosion-re-

sistant for use in all types of

environments. The rough-in

has a cylinder configura-

tion and houses the lamp

components and top door

finishing section.

Electrical

Lamp type: Monochromatic

LEDs, 12W LED array included.

Lamp module: Stainless

steel, sealed and purged of

all moisture with silicone

gaskets, stainless steel clamp

band and single fastener.

Electrical connection to lamp

module is done through

submersible connector with

gold-plated contacts.

Power module: LED driver is



epoxy resin that also

eliminates all moisture

intrusion. Module is provided

with submersible rated cord

leads for connection to


lamp module.

Conduit entry: Two (2)

bottom or side entries




inches (410 ccm).

Listings

U.L., C.U.L., IP68.

Example: M9410 A 12LED MVOLT CLW SP CLC 12B IHL LP BL


9(22.9)

16(40.6)

10(25.4)

9(22.9)


Notes1 Not available with M9430/M9440 square model.

2 Accessories are mutually exclusive; only RG and GS can be ordered together.

3 Not available with CLC or CLF convex lens.

4 Accessory not available with SS door material.

5 Finish only available with aluminum material.


7 Specify top lens. Bottom lens is FLC format.

8 For lens load ratings and slip resistance, see page 655.



PRODUCT INFORMATION

HYD

REL


Series18 Material Lamp type Voltage Distribution Lens Conduit entry





A Aluminum

B Bronze

SS Stainless steel

Incandescent14

P38100I

P38150I

P38250I

100Q

150Q

250Q

Fluorescent

18TRT

26TRT

32TRT

42TRT

Metal halide

70M

100M

150M

P3870M

P38100M

P38150M


70CMT6

150CMT6

70CM

100CM

150CM

P3870CM

P38100CM


50S

70S

100S

150S

120

208

240

277

347

MVOLT1

NSP Narrow spot15

SP Spot16

NFL Narrow flood

MFL Medium flood

FL Flood17

WFL Wide flood16

WWD Wall wash distribution2

FLC Flat lens clear




FLC5 Flat lens clear, 5° axial spread2





12B 1/2" NPT bottom

12S 1/2" NPT side


34S 3/4" NPT side

Options Lamped Finish13


IHL Internal honeycomb louver

ISS Internal source shield3

LSF Linear spread






External accessories5, 6

GS Glare shield

LC Polycarbonate protective cover7

LS Light shield

RG Rock guard

Trims5, 6

BTR Bronze trim round

BTS Bronze trim square

STR Stainless trim round

STS Stainless trim square

Rings and masks

PRR Protective ring round

PRS Protective ring square

GM Grout mask

Fusing

SF Single fuse9

DF Double fuse10

Ballast11

GEB Electronic ballast


LP Lamp installed

BL Black

BZ Bronze

DDB Dark bronze


GN Green

GR Gray

SND Sand

STG Steel gray


WH White

CF Custom

IN-G

RA

DE

M9700Intended Use




for uplighting of architectural

and landscape features. These

units can be flush-mounted

into a variety of substrates or

landscape materials.

Construction


cast bronze, cast aluminum or

bronze with stainless perfo-

rated trim insert, or stainless


square door trim.

Finish: Finish is natural

aluminum or bronze. Stain-

less steel door is brushed

finish. Aluminum doors may

be painted.

Rough-in section: Injection-

molded polymer with integral

junction box for through-

branch wiring. The housing

is U.V. stabilized, impact- and

corrosion-resistant for use in

all types of environments. The

rough-in section has a cylin-

der/vault configuration and

houses the lamp and power

module components and top

door finishing section.


steel housing, factory-sealed

and purged of all moisture

for longer component life.

Lens is sealed with silicone

gasket and stainless steel

clamp band assembly with

single fastener. Electrical

connection to lamp module is

done through a submersible

quick-pull plug connector

with gold-plated contacts.

Standard unit is thermally

protected. Lamp included.

Finishing section: Single

lens design includes door as-

sembly with 360° Aim-LockTM

lamp module support ring.

Module indexing provides

easy maintenance and re-

lamping without re-aiming.

Active optical lenses are also

available. Door trim locks into

position with two stainless

steel captive, tamper-

resistant fasteners.

Electrical



designed heat-dissipating ep-

oxy resin that also eliminates

all moisture intrusion to the

ballast. Module is provided


leads for connection to inte-

gral junction box and lamp

module. Standard ballast is

high power factor, fluorescent

electronic or HID magnetic.






inches (410 ccm).

Listings

U.L., C.U.L., IP68, CE, NEMKO.

Example: M9710 B 150CMT6 120 NSP FLC 34B ISS GS LP


12(30.5)

12(30.5)

12” Bronze or Aluminum Square 13” Stainless Steel Square

12” Bronze or Aluminum Round 13” Stainless Steel Round

13(33.0)

13(33.0)


12(30.5)

12(30.5)

16(40.7)

20(50.8)

Incandescent

HID, Fluorescent


Notes1 Standard on fluorescent and metal halide lamps with electronic ballast option.

2 FLF5 lens recommended for 70W HID and lower. FLC5 lens recommended for 100W HID and higher with WWD distribution.

3 ISS not available with PAR or fluorescent lamps, or WWD distribution.

4 Not available with PAR lamps.

5 Accessories are mutually exclusive. Choose one.

6 Not available with SS material.

7 LC not available for M9710, M9730.

8 Default coduit entry.

9 SF available with 120V, 277V or 347V HID only.

10 DF available with 208V, 220V or 240V HID only.

11 Available with MVOLT (120V-277V) voltage only for metal halide lamps to 150W maximum.

12 For use with O-10V analog dimmer (by others). Additional electrical conductors are required. Consult Hydrel for details.

13 Finish only available on aluminum doors.

14 Incandescent models available with 120V only.

15 NSP only available with T4 or T6 lamps.

16 Not available with T6 lamps.

17 Only available with PAR lamps.



PRODUCT INFORMATION

HYD

REL


IN-G

RA

DE

Series8 Material Lamp type LED color Voltage Distribution Lens





A Aluminum

B Bronze

SS Stainless steel

22LED CLW Cool white

CLWHO Cool white high output

WMW Warm white

AMB Amber

BLU Blue

GRN Green

RED Red

RBL Royal blue

1206

MVOLT

SP Spot

MFL Medium flood

LSD Linear spread distribution

WFL Wide flood

FLC Flat lens clear









12B 1/2" NPT bottom

12S 1/2" NPT side


34S 3/4" NPT side



LSF Linear spread

External accessories2, 3, 4

GS Glare shield

LC Polycarbonate protective cover

RG Rock guard

Trims2, 4


BTS Bronze trim square

STR Stainless trim round

STS Stainless trim square

Dimming

LDIM 0-10V Dimming6

LP Lamp included BL Black

BZ Bronze

DDB Dark bronze


GN Green

GR Gray

SND Sand

STG Steel gray


WH White

CF Custom

M9700Monochromatic LED

Intended Use




for uplighting of architectural

and landscape features. These

units can be flush-mounted

into a variety of substrates or

landscape materials.

Construction


cast bronze, cast aluminum or

bronze with stainless perfo-

rated trim insert, or stainless


square door trim.


molded polymer with

integral junction box for

through-branch wiring. The

housing is U.V. stabilized,

impact- and corrosion-re-

sistant for use in all types of

environments. The rough-in

section has a cylinder/vault

configuration and houses

the lamp and power module

components and top door

finishing section.

Lamp module: Stainless steel

housing, factory-sealed and

purged of all moisture for

longer component life. In

the double lens units, the

lamp module is suspended

below the top door lens in a

surface-adjustable, 15° tilt

mechanism. The insulating

air layer helps to reduce

surface temperatures.

Lens is sealed with silicone

gasket and stainless steel

clamp band assembly with

single fastener. Electrical

connection to lamp module is

done through a submersible

quick-pull plug connector

with gold-plated contacts.

Lamp included.

Finishing section: Includes

door assembly with 360°

Aim-Lock™ lamp module sup-

port ring. Module indexing

provides easy maintenance

and relamping without re-

aiming. Active optical lenses

also are available. Door trim

locks into position with

two stainless steel captive,

tamper-resistant fasteners.

Finish: Natural aluminum or

bronze. Stainless steel door

is brushed finish. Aluminum

doors may be painted.

Electrical

Lamp type: Monochromatic

LED, 22W.

Power module: LED driver is


designed heat-dissipating ep-

oxy resin that also eliminates

all moisture intrusion. Module

is provided with submersible

rated cord leads for connec-

tion to integral junction box

and lamp module.






inches (410ccm).

Listings

U.L.,C.U.L., IP68.

Example: M9710 A 22LED RBL 120 SP FLC 34B IHL LP BL


12(30.5)

12(30.5)

12” Bronze or Aluminum Square 13” Stainless Steel Square

12” Bronze or Aluminum Round 13” Stainless Steel Round

13(33.0)

13(33.0)


12(30.5)

16(40.7)

LED rough-in housingNotes1 Not available with M9730 or M9740 square model.

2 Accessories are mutually exclusive; choose one only.

3 Not available with CLC or CLF convex lens.

4 Accessory not available on "SS" door material.

5 Finish only available on aluminum door material.

6 Dimming available with 120V only.





Visit www.hydrel.com for color changing LED specifications.

PRODUCT INFORMATION

HYD

REL


IN-G

RA

DE

Series13 Material Lamp type Voltage Distributions Lens

M9820 Round double lens A Aluminum

B Bronze

Incandescent1

P64500I PAR64, ext. mogul end prong10

P56300I PAR56, mogul end prong10

Metal Halide

200M E28, mogul

250M E28, mogul

320M E28, mogul

400M E37, mogul

High Pressure Sodium

250ST E18, mogul

400ST E18, mogul

120

208

220

240

277

347

SP Spot

NSP Narrow spot2

MFL Medium flood

WFL Wide flood2

WWD Wall wash10

VNSP Very narrow spot2

FLC Flat lens clear3

FLC5 5° axial spread




1B 1" NPT bottom

12B 1/2" NPT bottom

12S 1/2" NPT side4


34S 3/4" NPT side4


ISS Internal source shield5,10


WWL Wall wash louver


GS Glare shield

RG Rock guard

Trim ring

BTR Bronze trim ring

STR Stainless trim ring

Fusing

SF Single fuse7

DF Double fuse8

Ballast

SCWA Super constant wattage ballast9


BZ Bronze

DDB Dark bronze


GN Green

GR Gray

SND Sand

STG Steel gray


WH White

CF Custom finish

M9800Intended Use

The M9800 series modular

in-grade lights are multi-pur-

pose units designed for flush

mounting in soil or concrete.

The units consist of a factory-

sealed, thermally protected

lamp module and epoxy

encapsulated power module

placed in a secured rough-in

section (RIS) which includes

channeled convective cool-

ing, an integral junction box

and door assembly.

Construction

Finishing section: Includes

360° Aim-Lock™ support

ring, door assembly, tilt ring,

and module indexing seg-

ment providing maintenance

and relamping without

re-aiming. The lamp module

is suspended below the door

lens with a surface-adjust-

able, 10° tilt mechanism. The

insulating air layer reduces

surface temperatures. Doors

available in cast aluminum

or cast bronze, round. Two

stainless steel captive fasten-

ers lock the finishing section

into the rough-in section.


molded polymer cylinder

with integral junction box

for branch wiring (75 cubic

inches /1230ccm), U.V. stabi-

lized, impact- and corrosion-

resistant for use in many

environments. Houses power

module, lamp modules and

finishing components.3

Electrical

Lamp type: Incandescent –

PAR64 500W max. HID – E23,

E28, E37 and elliptical to 400W.

Socket: Incandescent - Mogul

end prong or GX16D base. HID

- Mogul or E40 base.




epoxy resin to eliminate

all moisture intrusion to

the ballast. Provided with

submersible rated cord/

connector for connection to


lamp module. HID ballasts

are magnetic.






inches (410 ccm).

Listings

U.L., C.U.L., CE, NEMKO, IP68.

Example: M9820 A 400M 277 SP FLC 34B ISS SF LP BZ


18(45.7)

18(45.7)

27-1/2(69.9)

18(45.7)

16-1/8(41.0)


Notes1 Incandescent models available with 120V only.


3 FLC will be used if lens is not chosen except for WWD distribution, then FLC5 will be used.

4 Not available with incandescent lamps.

5 Not available with WWD distribution.

6 Mutually exclusive; choose only one.

7 SF is only available with 120V, 277V or 347V on HID only.

8 DF is only available with 208V, 220V or 240V on HID only.

9 Standard on all metal halide lamps.

10 WWD and ISS not available with P56300I, P64500I.

10 Paint finish only available on aluminum doors





HID

Incandescent

PRODUCT INFORMATION

HYD

REL


IN-G

RA

DE

Accessories

Installation Accessories Safety Accessories

BTR Bronze trim ring STR Stainless trim ring RG Rock guard, bronze or aluminum LC Polycarbonate protective cover

GS Glare shield, bronze or aluminum

Light Control Accessories

IHL Internal honycomb louver WWL Wall wash louver ISS Internal source shield

FLC5 5° Axial spread lens FLC10 10° tilt lens FLC20 20° tilt lens

Door Material Options

A Aluminum door B Bronze door SS Stainless steel door

M9000Accessories and Door Material

PRODUCT INFORMATION

HYD

REL


IN-G

RA

DE

Series Material Lamp type Voltage Distribution Lens Conduit entry Options2, 4 Lamped

PDX4 In-grade5

PDX4ML Marker light

SS Stainless steel

BSS Brushed stainless steel2

B Bronze

M20 MR16, GX5.3, 20W max.

M35 MR16, GX5.3, 35W max.

M50 MR16, GX5.3, 50W max.

MR1120 MR11, GU4, 20W max.

MR1135 MR11, GU4, 35W max.

121

120

PDX4

NSP Narrow spot 3

SP Spot

NFL Narrow flood

WFL Wide flood3

FL Flood3

PDX4ML

ML180 180°

ML360 360°

FLC Flat lens clear

FLCAS Flat lens clear, anti-slip2

FLSR Flat lens, slip resistant2

12S Two 1/2" NPT side (standard)

12B Two 1/2" NPT bottom

Internal accessories







LPI Lamp included

Intended Use

Hydrel's Paradox Series

sealed modular in-grade

luminaires are multi-purpose

units designed for uplighting

architectural and landscape

features. These units can be

flush-mounted into a variety

of substrates or landscape

materials, and are ideal when

aperture size or luminaire

depth is a priority.

Construction

Door material: Die-cast

bronze or stainless steel.

Housing: Die-cast bronze

and injection-molded

thermoplastic. The housing



all types of environments.

Finish: Natural bronze or stain-

less steel with a brushed finish.

Optics

Lens/seal: Tempered clear

flat borosilicate glass. The

patent-pending door/lens

seal uses proprietary knife

edge technology to secure

the assembly to the housing.

Two captive screws hold the

assembly in place. The lens is

notched to provide maximum

aperture opening.

Electrical

Lamp: MR16 GX5.3 base or

MR11GU4 base. Conduit en-

try: Two 1/2" NPT side entries

standard, two 1/2" bottom

entries are optional.

Power supply: Optional inte-

grally mounted transformer,

prewired for easy installation

and maintenance.

Listings

U.L., C.U.L.,CSA-U.S., CSA,

IP68.

Example: PDX4 B M35 120 NSP FLC 12S IHL LPI


4(10.2)

5(12.7)

5(12.7)

4(10.2)

8(20.3)

5(12.7)


Low voltage Line voltage

In-grade


Marker Light

5(12.7)

5(12.7)

8(20.3)

5(12.7)

3-7/8(9.9)

3-7/8(9.9)

Notes1 Transformer sold separately.

2 Only available if PDX4 is chosen.

3 Not available with MR11 lamps.

4 Only one accessory available.


PDX4Paradox™ 4" Architectural In-Grade

Sealed In-Grade


PRODUCT INFORMATION

HYD

REL


IN-G

RA

DE

Series MaterialLamp type LED color Voltage Distribution Lens Conduit entry Options Lamped

PDX4 In-grade3

PDX4ML Marker light

SS Stainless steel


B Bronze

9LED CLW Cool white

WMW Warm white

AMB Amber

BLU Blue

GRN Green

RED Red

RBL Royal blue

122

MVOLT

PDX4

SP Spot

MFL Medium flood

PDX4ML

ML180 180°

ML360 360°

FLC Flat lens clear




12B Two 1/2" NPT bottom

TKO Tilt kit optic1

LPI LED array included

Intended Use












Construction



Housing: Die-cast bronze

and injection-molded

thermoplastic. The housing



all types of environments.

Finish: Natural bronze or stain-

less steel with a brushed finish.







Two captive screws hold the



aperture opening.

Electrical

LED: Monochromatic LED, 9W.

Conduit entry: Two 1/2"

NPT side entries standard;

two 1/2" bottom entries are

optional.

Power supply: Integrally

mounted modular LED driver,

prewired for easy installation

and maintenance.

Listings

CSA-U.S., CSA, IP68.

Example: PDX4 B 9LED CLW MVOLT SP FLC 12S TKO LPI


4(10.2)

5(12.7)

5(12.7)

4(10.2)

8(20.3)

5(12.7)


5(12.7)

5(12.7)

8(20.3)

5(12.7)

3-7/8(9.9)

3-7/8(9.9)

Notes1 Only available if PDX4 is chosen.

2 Transformer sold separately.


Sealed In-Grade



Monochromatic LED


In-grade


Marker Light

PRODUCT INFORMATION

HYD

REL


IN-G

RA

DE

Series22 Material Lamp type Voltage Distribution

PDX7 In-grade

PDX7CL In-grade with cool lens

SS Stainless steel


B Bronze

Low voltage1

M20 MR11, GZ4

M35 MR11, GZ4

M50 MR16, GX5.3

M75 MR16, GX5.3

P3650 PAR36, screw terminal

P3675 PAR36, screw terminal

AR11135 G53

AR11150 G53

AR11175 G53

Incandescent2

P2050I PAR20, medium


HID

20MHCP PGJ59

20MHCG GU6.510

20CMT4 T4, G8.511, 17

35CMT4 T4, G8.5

70CMT4 T4, G8.511, 17

35CMT6 T6, G1218

70CMT6 T6, G1218

P2035CM PAR20, medium



R11135CM GX8.5

R11170CM GX8.5

Fluorescent 4 , 13

18TRT Triple tube, GX24q2


123

120

208

240

277

347

MVOLT5

NSP Narrow spot

SP Spot

NFL Narrow flood

MFL Medium flood

WFL Wide flood

FL Flood19


Lens Conduit entry Options Lamped

FLC Flat lens clear



34S Two 3/4" NPT side (standard) Internal accessories

IHL Internal honeycomb louver16


WWL Wall wash internal louver8





External accessories

RG Decorative rock guard

GS Glare shield21

Fusing

SF Single fuse14

DF Double fuse15

Ballast


LPI Lamp included


Intended Use












Construction


bronze or stainless steel,

available with die-cast brass

extension for cool application.

Housing: Compression-

molded polyester with

patent-pending internal

direct access junction box

for through-branch wiring.

Internal junction box pro-

vides 44 cubic inches volume

to ensure proper seal during

installation. The housing is

U.V. stabilized, impact- and



The housing has a sidecar



components as well as the

lens/door finishing section.3







Three captive screws hold the



aperture opening.

Finish: Natural bronze or

stainless steel with a brushed

finish. Bronze doors may be

painted. Consult factory for

color options.

Optics

Reflectors (non-reflectorized

lamps): High-purity anodized

specular or semi-specular

materials in various distribu-

tions provide maximum

performance and uniformity.

Lamps can be aimed 15° from

vertical and rotated 360°. All

configurations available with

Hydrel's patented Aim-Lock™

locking components to allow

re-lamping and maintenance

without re-aiming.

Electrical

Low voltage: MR11 GZ4 base,

35W max. MR16 GX5.3 base,

75W max., PAR36 screw ter-

minal base, 75W max. AR111

G53 base, 75W max.

Incandescent: PAR20, PAR30,

medium base.

HID: T4 or T6 bi-pin base,

70W max PAR-20 or PAR-30

medium base, 70W max color

corrected metal halide.

Fluorescent: Triple-tube CFL

4-pin base, 26W max.

If a specific lamp is desired,

specify manufacturer's lamp

number; most lamps can be

supplied. Lamp included.

Conduit entry: Two

molded 3/4" NPT side entries

standard; bottom hubs are

molded with a 3/4" NPT

membrane knockout.

Ballast: Integrally mounted

modular ballast package,

prewired with quick con-

nectors for easy installation

and maintenance. Ballasts

are rated for low starting

temperatures. High power

factor magnetic ballasts

standard; electronic ballasts

also available.

Listings

U.L., C.U.L.

Example: PDX7 B 35CMT6 120 NSP FLC 34S RG LPI


9(22.9)

15(38.1)

5(12.7)

8(20.3)

7(17.8)

Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted. Notes

1 Low voltage only available with 12V, 120V, 240V, 277V inputs.

2 Incandescent models are available with 120V only.

3 Available for low voltage lamps only.

4 18TRT or 26TRT available with MVOLT only.

5 Available with HID if GEB chosen, standard with fluorescent lamps.

6 Available with T4 G8.5 base, 20MH PGJ5 base, and 20MH GU6.5 base.

7 Available with T6 and T4 lamps in NSP distribution only. Not valid with WWD.

8 Available with HID if GEB chosen, standard with fluorescent lamps.

9 Philips Mini MasterColor available in 20W and 120V GEB only.

10 GE Mini UltraMax available in 20W and120V GEB only.

11 20CMT4, 35CMT4 or 70CMT4 only valid with MVOLT and GEB.

12 Not available with decorative rock guard.

13 Available only in MFL light distribution.

14 SF is available only with 120V, 277V or 347V on HID.

15 DF is available only with 208V, 220V or 240V on HID.

16 IHL not available with color filters.

17 Available with NSP, MFL and WWD only.

18 Available with NSP, MFL and WFL only.


20 HID only.

21 SS door only.

22 For lens load ratings, slip resistance and tempera-tures, see page 655.

Sealed In-Grade


15(38.1)

10(25.4)

5(12.7)

Standard Housing Cool Lens Housing

PRODUCT INFORMATION

HYD

REL


IN-G

RA

DE

Series3 Material Lamp type LED color Voltage Distribution Lens Conduit entry Options Lamped

PDX7 SS Stainless steel


B Bronze

12LED CLW Cool white


WMW Warm white

AMB Amber

BLU Blue

GRN Green

RED Red

RBL Royal blue

MVOLT SP Spot

MFL Medium flood

WFL Wide flood

LSD Linear spread distribution

FLC Flat lens clear


FLSR Flat lens frosted, slip resistant1






GS Glare shield2

LPI LED array included


Monochromatic LED

Intended Use







flush mounted into a variety





Construction






direct-access junction box













lens/door finishing section.

Finish: Natural bronze

or stainless steel with a

brushed finish.

Optics







Three captive screws hold the



aperture opening.

Electrical

LED: Monochromatic LEDs,

12W.

Conduit entry: Two




membrane knockout.

Power module: Integrally

mounted modular LED driver,

prewired with quick connec-

tors for easy installation and

maintenance.

Listings

U.L., C.U.L.


9(22.9)

15(38.1)

5(12.7)

8(20.3)

7(17.8)


Notes1 Not available with decorative rock guard.

2 SS door only


Sealed In-Grade

Example: PDX7 B 12LED CLW MVOLT SP FLC 34S LPIORDERING INFORMATION

PRODUCT INFORMATION

HYD

REL


IN-G

RA

DE

Series14 Material Lamp type Voltage Distribution

PDX10 In-grade

PDX10CL In-grade with cool lens

SS Stainless steel


B Bronze

Incandescent1





100Q T4, mini can

150Q T4, mini can

Fluorescent3, 9





Metal halide

35CMT4 T4, G8.57

70CMT4 T4, G8.57

P3035CM PAR30 medium2

P3070CM PAR30 medium2

R11135CM GX8.52

R11170CM GX8.52

35CMT6 T6, G-122

70CMT6 T6, G-12

150CMT6 T6, G-122

50M E17, medium2

70M E17, medium

70CM E17, medium

100M E17, medium

100CM E17, medium

150M E17, medium2

150CM E17, medium2

P3870M PAR38, medium10

P3870CM PAR38, medium10

P38100M PAR38, medium10

P38100CM PAR38, medium10


50S E17, medium2

70S E17, medium

100S E17, medium

150S E17, medium

120

208

220

240

277

347

MVOLT4

NSP Narrow spot11

SP Spot

NFL Narrow flood

MFL Medium flood

WFL Wide flood

FL Flood


Lens Conduit entry Options Lamped

FLC Flat lens clear

FLCAS Flat lens clear, anti slip8

FLCSR Flat lens frosted, slip resistant8

34S Two 3/4" NPT side (standard) Internal accessories



WWL Wall wash internal louver6








Fusing

SF Single fuse12

DF Double fuse13

Ballast


LPI Lamp included


Intended Use












Construction


























Four captive screws hold the



aperture opening.

Optics

Reflector (non-reflectorized


specular or semi-specular

materials in various distribu-

tions provide maximum


Lamps can be aimed 15° from

vertical and rotated 360°. All

configurations available with

indexed and locking compo-

nents to allow re-lamping

and maintenance without

re-aiming.

Electrical

Conduit entry: Two




membrane knockout.


modular ballast package,

prewired with quick con-

nectors for easy installation

and maintenance. Ballasts

are rated for low starting

temperatures. High power

factor magnetic ballasts

standard; electronic ballasts

also available.

Listings

U.L., C.U.L.

Example: PDX10 B 35CMT6 120 NSP FLC 34S RG LPI


12(30.5)

12(30.5)

18(45.7)

10(25.4)

6(15.2)


Notes1 Incandescent models are available with 120V only.

2 220V not available.

3 Available with MVOLT only.

4 If GEB and HID lamp source are chosen, use MVOLT.

5 Available with E17, T6 and T4 lamps in NSP distribution only. Not valid with WWD.

6 Available only with WWD distributions or TRT lamps.

7 35CMT4 or 70CMT4 only valid with MVOLT and GEB.

8 Not available with decorative rock guard.

9 Available only in MFL, WWD or WFL light distribution.

10 PAR38 lamps only available with SP or FL distributions.

11 NSP only valid with T4 or T6 lamps.

12 SF is available only with 120V, 277V or 347V on HID.

13 DF is available only with 208V, 220V or 240V on HID.


Sealed In-Grade


18(45.7)

14(35.7)

Standard Housing Cool Lens Housing

PRODUCT INFORMATION

HYD

REL


IN-G

RA

DE

Series4 Material Lamp type LED color Voltage Distribution Lens

PDX10 SS Stainless steel


B Bronze

22LED 22W CLW Cool white

CLWHO Cool white, high output

WMW Warm white

AMB Amber

BLU Blue

GRN Green

RED Red

RBL Royal blue

1202

MVOLT

SP Spot, clear flat lens

MFL Medium flood, clear flat lens

WFL Wide flood, clear flat lens

LSD Linear spread distribution, clear flat lens

FLC Flat lens clear

FLCAS Flat lens clear, anti slip1

FLSR Flat lens frosted, slip resistant1

Conduit entry Options Lamped






Ballast

LDIM 0-10V dimming3

LPI Lamp included


Monochromatic LED

Intended Use












Construction




















Optics

Lens ⁄seal: Tempered clear


patent-pending door⁄ lens




Four captive screws hold the



aperture opening.

Electrical

LED type: 22W Monochro-

matic or color changing.

Conduit entry: Two




membrane knockout.

Power module: Integrally

mounted modular LED

driver, prewired with quick

connectors for easy installa-

tion and maintenance.

Control: Standard DMX512.

3-channels per fixture: Red,

Green, Blue or 4.

Communication to fixture:

DMX512 direct.

Listings

U.L., C.U.L.

Example: PDX10 SS 22LED CLW MVOLT SP FLC 34S IHL LPI

Sealed In-Grade

12(30.5)

12(30.5)

18(45.7)

10(25.4)

6(15.2)



Notes1 Not available with RG option.

2 Only valid with LDIM.

3 Only valid with 120V.



Monochromatic Housing


PRODUCT INFORMATION

HYD

REL


AccessoriesIN

-GR

AD

E

PARADOX™

RG Decorative Rock Guard

WWL Wallwash Louver IHL Internal Honeycomb Louver ISS Internal Source Shield GS Glare Shield Stainless Steel(PDX7 only)

TKO 5° Tilt Lens Filter(PDX4 only)



TKO kit includes 5°, 10° and 15° tilt fi lters and the 5° axial spread fi lter.

TKO 5° Axial Spread Filter

FLCAS Anti-Slip Lens FLSR Slip-Resistant Lens

Safety Accessories

Light Control Accessories

NotesFor visual representation only; not scaled proportionately.

PRODUCT INFORMATION

HYD

REL


IN-G

RA

DE

Series Material Lamp type Voltage Distribution Lens15

6700 B Bronze Incandescent1

P3050I

P3075I

P38100I

P38150I

P38250I

100Q

250Q

Fluorescent2

18TRT

26TRT

32TRT

42TRT

Metal halide

100M

150M

P38100M

P3870M


70CMT6

150CMT6

70CM

100CM

150CM

P38100CM

P3870CM


50S

70S

100S

150S

120

208

240

277

347

MVOLT3

SP Spot5

NSP Narrow spot4

NFL Narrow flood

FL Flood5

MFL Medium flood

WFL Wide flood5




FLC Flat lens clear






Conduit entry Options15 Lamped

12B 1/2" NPT bottom

34B 3/4" NPT bottom (default)

12S 1/2" NPT side

34S 3/4" NPT side





ITB Internal tilt bracket14

Filters


CFAMB Color filter amber13

CFBLU Color filter blue13

CFGRN Color filter green13

CFRED Color filter red13


GS Glare shield

LS Light shield

RG Rock guard9


Fusing

SF Single fuse10

DF Double fuse11

Ballast12


LP Lamp installed

6700Intended Use

The 6700 Series sealed

outdoor lighting fixture

offers high performance and

durability in an in-grade fix-

ture. Many lamping options

and distributions are avail-

able, including HID lamps to

100W. Integral ballast and

junction box further add to

the series' reliability.

Construction

Material: Heavy wall cast

bronze body and door.

Finish: Raw bronze.

Optics

Reflector (non-reflectorized


specular or semi-specular ma-

terials in various distributions

provide maximum perfor-

mance and uniformity. Lamps

or reflectors are adjustable.

Lens: Tempered clear flat

borosilicate glass.

Electrical

Conduit entry: Two 1/2" or

3/4" NPT entries available,

bottom or side.


ballast, rated for low starting

temperatures.

Listings

U.L., C.U.L., IP67.

Example: 6700 B 70CMT6 MVOLT NSP FLC 34B ISS GEB LP


13-3/4(34.9)

10-1/2(26.7)

9-1/4(23.5)

1/4(0.6)

18-1/8(46.0)



2 Fluorescent models available with 347V or MVOLT (120-277V) only.

3 Standard on fluorescent lamps and metal halide lamps with GEB ballasts.

4 NSP only available with T4 or T6 lamps.

5 Not available with T6 lamps, FL only available with PAR lamps.

6 ISS not available with WWD distribution or P38 lamp type.

7 Only available with wall wash distribution (WWD).


9 RG not available with CLC or CLF lenses.

10 SF only is available with 120V, 277V or 347V on HID only.

11 DF only is available with 208V or 240V on HID only.

12 Electronic ballasts only are available with metal halide lamps and MVOLT voltage.

13 Color filter available to 100W max.

14 ITB only available with NSP and MFL.

15 See page 645 for visual representation.

Sealed In-Grade


PRODUCT INFORMATION

HYD

REL


IN-G

RA

DE

Series Lamp type Voltage Distribution Lens Mounting Conduit entry

WD9100 Wet-dry in-grade

Incandescent1




Quartz3

100Q T4, MC

150Q T4, MC

120 SP Spot1

NFL Narrow flood2

MFL Medium flood

FL Flood1, 3

WFL Wide flood4


FLC Flat lens clear



FLC30 Flat lens clear, 30° spread



NM Niche mount6

BM Base mount7

34B 3/4" NPT bottom

12B 1/2" NPT bottom

Options Cord set length Lamped


MSR Modular support ring

STR Stainless steel trim ring, round

CSL_ 10'-120' of cord available in 5' increments LP Lamp installed

WD9100Intended Use

The WD9100 Series wet/

dry up lights represent the

state-of-the-art in flush up

light construction. These

multi-purpose modular units

are designed for mounting in

areas that are prone to being

submerged in water.

Construction

Door material: Cast bronze

door with rock guard. Door

locks the lamp housing into

the rough-in section with a

single tamperproof stain-

less fastener.


molded ABS, U.V. stabilized,

impact- and corrosion-

resistant for use in all types

of environments.

Lamp module housing: Stain-

less steel, sealed and purged

of all moisture. Integral cord

set attached. Cord entrance

has a brass water-tight seal

and is epoxy encapsulated.

Thermally protected.

Cord: NM – Minimum of 35'

of 16-3 STWA , submersible

cord for connection to a

remote junction box (sold

separately). BM – Minimum

of 10' of 16-3 STWA submers-

ible cord. Bronze junction box

included. Cord length must

be specified.

Optics

Active lenses may be used

with PAR lamps to modify

the distributions.

Electrical

Lamp type: T-4 mini-can

lamps to 150W. PAR-38 lamps

to 250W. Lamps included.

Conduit entry: 1/2" and

3/4" NPT bottom openings

are available in the cast

bronze integral junction box.

Suitable for through-branch

wiring. Junction box has 24

cubic inches of volume.

Listings

U.L.

Example: WD9100 P38100I 120 SP FLC NM 34B IHL CSL30 LP


12(30.5)


12(30.5)

11(27.9)

Niche Mount

12(30.5)

11(27.9)

Base Mount

Notes1 PAR38 lamps are available only with SP or FL distributions; lens op-

tions available for modifying PAR38 distributions.

2 NFL distribution requires a FLC30 lens.

3 FL distribution is not available with 100Q or 150Q.

4 WFL distribution requires a FLF lens.

5 WWD distribution requires a FLC5 lens.

6 NM mounting does not come with an underwater junction box.

7 BM mounting comes with an underwater junction box.

Wet-Dry In-Grade


PRODUCT INFORMATION

HYD

REL


IN-G

RA

DE

Technical Information

Notes1 Per Ceramic Tile Institute: Coefficient of

friction values greater than 0.6 are considered slip resistant. Coefficient of friction values between 0.50 to 0.60 are conditionally slip resistant. Coefficient of friction values less than 0.50 are questionable.

2 Test performed by: SGS U.S. Testing Company Inc. Tested in accordance with ISO/ICE 17025.

3 Test performed by: Spec Testing, Inc. Tested in accordance with ISO/ICE 17025.

The M9000 Series offers reduced lens surface tem-

peratures through the use of thermal isolation and

patented convective cooling technologies. As with the

use of all luminaires in pedestrian areas, Hydrel rec-

ommends that proper care be taken in the selection

of luminaire location, lamp wattage and distribution

in order to minimize pedestrian risk.

M9400 LENS SURFACE TEMPERATURE2

20W T4 MH

35W T6 MH

70W T6 MH

75W MR16

70W PAR30 MR16

70W PAR30 INCAN

NSP MFL NSP MFL NSP MFL NFL SP MFL

SINGLE LENS 69°C 66°C 82°C 89°C 117°C 119°C 107°C 120°C 107°C

DOUBLE LENS 49°C 46°C 54°C 53°C 75°C 73°C 70°C 82°C 90°C

% DECREASE 28% 30% 34% 40% 36% 39% 35% 32% 16%

SLIP RESISTANCE AND LOAD RATING

M9400 M9700 M9800

MAXIMUM LOAD RATINGPeak compression force of 7,700 lbs. (single lens) or 2,550 lbs. (double lens).

LENS STATIC COEFFICIENT of FRICTIONM9400 Anti-Slip Lens (FLCAS): Dry = 0.76; Wet = 0.10

M9400 Slip Resistant Lens (FLSR): Dry = 0.66; Wet = 0.67

MAXIMUM LOAD RATINGPeak compression force of 3,750 lbs. (single lens) or 3,200 lbs. (double lens).



MAXIMUM LOAD RATINGPeak compression force of 3,950 lbs. (double lens).



SLIP RESISTANCE AND LOAD RATING

PDX4 PDX7 PDX10

MAXIMUM LOAD RATINGPeak compression force of 2,048 lbs.

LENS COEFFICIENT OF FRICTION1

PDX4 Anti-Slip Lens (FLCAS): Dry = 0.78; Wet = 0.30

PDX4 Slip Resistant Lens (FLSR): Dry = 0.68; Wet = 0.59

MAXIMUM LOAD RATINGPeak compression force of 2,847 lbs.




MAXIMUM LOAD RATINGPeak Compression Force of 4,944 lbs.





100W E17 MH 150W T6 MH 150W E17 MH 32 W TRT 70W T6 MH 100W PAR38 MH 250W PAR38 INCAN

SP NFL WFL SP NSP MFL SP MFL WFL SP MFL SP MFL WFL SP FL

SINGLE LENS 114°C 94°C 112°C 119°C 129°C 153°C 107°C 120°C 107°C 69°C 68°C 89°C 104°C 98°C 110°C NA

DOUBLE LENS 70°C 85°C 75°C 73°C 93°C 139°C 70°C 82°C 90°C 43°C 44°C 55°C 97°C 65°C 70°C 89°C

% DECREASE 38% 10% 33% 38% 28% 39% 35% 32% 16% 38% 35% 38% 7% 34% 36% NA


250W E28 MH 400W E37 MH

SP MFL SPSP w/

ISSMFL

DOUBLE LENS 49°C 46°C 54°C 53°C 75°C

PDX4 LENS SURFACE TEMPERATURE3

20W MR16 35W MR16 50W MR16 20W MR11 35W MR11 9W LED

SP NSP FL SP NSP FL SP NSP FL NFL SP SP MFL

PDX4 LENS 79.5°C 77.5°C 81°C 122.8°C 119°C 123°C 134°C 131°C 148°C 87°C 113°C 33°C 35°C


20W T4 MH 35W T4 MH 70W T4 MH 36 W T6 MH 70W T6 MH 70W PAR30 MH 70W PAR30 INCAN 75W MR16

NSP SP MFL NSP SP MFL NSP SP MFL NSP SP MFL NSP SP MFL SP MFL MFL

PDX7 LENS 70°C 75°C 71°C 95°C 112°C 94°C 133°C 152°C 125°C 95°C 90°C 92°C 129°C 123°C 119°C 125°C 118°C 106°C

PDX7CL LENS 43°C 44°C 44°C 53°C 55°C 57°C 73°C 69°C 66°C 52°C 47.8°C 50°C 63°C 62°C 67°C 62°C 68°C 53°C

% DECREASE 39% 42% 38% 44% 51% 39% 45% 55% 47% 45% 47% 46% 51% 50% 44% 50% 42% 50%

LENSLoad Ratings, Slip Resistance and Lens Temperatures


70W T6 MH

150W T6 MH 100W E17 MH 150W E17 MH 100W PAR38

MH

150W PAR38 INCAN

150W E17 HPS 42W TRT FLUOR

SP NFL FL SP NFL FL SP NFL FL SP NFL FL MFL MFL SP NFL FL SP NFL FL

PDX10 LENS 79°C 83°C 86°C 99°C 105°C 108°C 95°C 115°C 114°C 115°C 148°C 143°C 98°C 96°C 113°C 138°C 139°C 70°C 71°C 68°C

PDX10CL LENS 51°C 55°C 55°C 60°C 77°C 72°C 60°C 76°C 75°C 68°C 88°C 92°C 65°C 69°C 75°C 75°C 83°C 43°C 46°C 43°C

% DECREASE 35% 33% 36% 39% 27% 33% 37% 34% 34% 41% 40% 36% 34% 28% 34% 46% 40% 39% 35% 37%

The Paradox™ Architectural In-grade Cool Lens model (PDX7CL &

PDX10CL) utilizes a combination brass top ring, heat sink, and reflec-

tive secondary IR lens filter to reduce heat by 30% when necessary. As

with the use of all luminaires in pedestrian areas, Hydrel recommends

that the proper care be taken in the selection of luminaire location, lamp

wattage and distribution, in order to minimize pedestrian risk.

M9000 Series

PDX Series

PRODUCT INFORMATION

HYD

REL


IN-G

RA

DE

Series Material Lamp type Voltage Distribution4 Conduit entry Grill Options Lamped Finish6

9310 A Aluminum

B Bronze

Low voltage

M20

M35

M50

Incandescent

P2035I

P2050I


20CMT41

35CMT41,7

P2035CM1,7

122

120

208

220

240

277

347

MVOLT3

NSP Narrow spot

SP Spot

NFL Narrow flood

FL Flood

MFL Medium flood

WFL Wide flood

12B 1/2" NPT bottom


LC Lexan cover

Ballast


LP Lamp installed

BL Black

BZ Bronze

DDB Dark bronze


GN Green

GR Gray

SND Sand

STG Steel gray


WH White

CF Custom

9310Intended Use

The 9310 Series is designed

for flush mounting in plant-

ers and open lawn areas.

Construction

Grill: Cast aluminum painted

or cast bronze natural finish.

Well: Thick wall A.B.S. pipe.

Lamp housing: Cast alumi-

num or bronze body with fins

for heat dissipation.

Electrical

Lamp type: Incandescent

– PAR20, 50W max. Low volt-

age – MR16, 50W max. HID –

PAR20 HID, T4, 35W max.

Conduit entry: Interconnect-

ing conduit shall be 1/2"

galvanized pipe, with brass

cord seal.

Listings

U.L., CSA.

Example: 9310 B M50 120 NSP 34B LC LP


Notes1 Requires GEB ballast option.


3 MVOLT is standard on all metal halide lamps.

4 Not all distributions available on all lamp types.

5 Electronic ballasts are only available with metal halide lamps and MVOLT voltage.

6 Finish available on aluminum fixtures only.

7 T4 lamps only available with SP and MFL distribution.


9310 Incandescent, Low Voltage (No Transformer)

9310 HID, Low Voltage (With Transformer)

10(25.4)

20(50.8)

7 Grill (17.8)

7 Grill (17.8)

7 (17.8)4-1/2(11.4)

7 (17.8)4-1/2(11.4)


Well Lights



PRODUCT INFORMATION

HYD

REL


IN-G

RA

DE

Series Material Lamp type Voltage Distribution6 Lens Conduit entry

9330

9335

A Aluminum2

B Bronze

Low voltage

M20

M75

P3636ILV

P3650ILV

Incandescent1

P2050I

P3050I

P3075I


100CM

P2035CM

P3035CM

P3070CM

Metal halide

50M

70M

100M


50S

70S

100S

123

120

2084

240

277

347

MVOLT5

NSP Narrow spot12

SP Spot

MFL Medium flood

NFL Narrow flood

FL Flood

WFL Wide flood12



34B 3/4" NPT bottom

Grill Options Lamped Finish10

DEL Directional eggcrate louver (square)2

FEL Full eggcrate louver (square)2

DL Directional louver (round)

CPC Clear polycarbonate (round)2


ASR Aim set ring2


Fusing

SF Single fuse7

DF Double fuse8

Ballast



BZ Bronze

DDB Dark bronze


GN Green

GR Gray

SND Sand

STG Steel gray


WH White

CF Custom

9330 9335

Intended Use

The 9330 Series is designed

for flush mounting in planter,

tree grates or open lawn

areas. The 9335 Series is

designed for mounting in

standard Neenah tree grates.

Construction

Grill: Cast aluminum or

bronze; locks to well with

two set screws. Full eggcrate

louver or directional eggcrate

louver square grills and

directional louver or clear

polycarbonate cover round

grills are available. Eggcrate

directional louvers provide

30° cut-off.

Lamp module housing:

Stainless steel, sealed and

purged of all moisture to

100°F (38°C) and mounted

integral with grill. Angular

adjustment up to 15°. Electri-

cal access to lamp module is

done through submersible

rated connector. Thermally

protected. Lamp included.

Well: Thick wall polypropyl-

ene pipe.

Optics

Lens: Tempered glass lens.

Convex lens clear (CLC) is

standard. Convex lens frosted

(CLF) also available.

Electrical

Power module: Sealed unit

encapsulated in an engi-

neered composite resin to

eliminate all water entry.

Conduit entry: Two 3/4" NPT

openings in the bottom of

the junction box 25 cubic

inches of volume suitable for

through-branch wiring. Fix-

ture/junction box connecting

conduit is 1/2" galvanized

pipe with brass cord seal.

Listings

U.L., CSA, IP67.

Example: 9330 B P3070CM MVOLT SP CLC 34B DL ASR GEB LP


18-1/2(47.0)

8-1/4(21.0)

8-3/4(22.2)


9330 HID w/ASR

18(45.7)

8-1/4(21.0)

8-3/4(22.2)

9330 Incandescent

Clear Polycarbonate (CPC)

Full EggcrateLouver (FEL)

Directional EggcrateLouver (DEL)

Directional Louver (DL)

9-1/2(24.1)

9-1/2(24.1)

9-1/2(24.1)

9-1/2(24.1)


2 Not available with 9335.


4 208V not available with low-voltage fixtures.

5 Only available with GEB option.

6 Not all distributions available with all lamp types. Check lamp manufacturers specification.

7 SF available with 120V, 277V or 347V with HID only.

8 DF available with 208V, 220V or 240V with HID only.

9 Electronic ballasts are only available with metal halide lamps and MVOLT voltage.

10 Finish available on aluminum fixtures only.

11 Not available with MH, HPS or P30I WFL.

12 WFL and NSP are only available with incandescent, PAR and MR16 lamps.

Well Lights

1/2(1.3)

20(50.8)

20(50.8)

10-3/8(27.0)

10-3/8(27.0)

10-3/8(27.0)

10-1/2(26.7)

10-1/2(26.7)

9335 HID 9335 Incandescent



PRODUCT INFORMATION

HYD

REL


IN-G

RA

DE

Series Material Lamp type Voltage Distribution Lens Conduit entry

9350 A Aluminum

B Bronze

Quartz1

100Q

150Q

250Q

Incandescent1

P38100I

P38150I


70CM

100CM

150CM

P3870CM

Metal halide

70M

100M

P38100M

150M

P38150M


70S

100S

150S

120

208

240

277

347

MVOLT2

SP Spot

FL Flood

CLC Convex lens clear3


34B 3/4" NPT bottom

Grill Options Lamped Finish8

DEL Directional eggcrate louver (square)

FEL Full eggcrate louver (square)

DL Directional louver (round)

CPC Clear polycarbonate (round) 4


IJB Internal junction box

ASR Aim set ring


Fusing

SF Single fuse5

DF Double fuse6

Ballast

GEB Electronic ballast2, 7


BZ Bronze

DDB Dark bronze


GN Green

GR Gray

SND Sand

STG Steel gray


WH White

CF Custom

9350Intended Use

Uplighting of trees, shrubs,

terraces or walls from a flat

lawn area. The units are

completely weatherproof,

designed for installation in

damp areas.

Construction

Well: Thick wall polypropyl-

ene pipe for higher wattages.

Grill: Cast aluminum or

bronze. Locks to well with

two set screws. Full eggcrate

louver or directional eggcrate

louver square grills and

directional louver or clear

polycarbonate cover round

grills are available. Eggcrate

directional louvers provide

30° cut-off.

Lamp module housing:

Stainless steel, sealed and

purged of all moisture to

100°F (38°C) and mounted

integral with grill. Angular

adjustment up to 15°. Electri-

cal access to lamp module is

done through submersible

rated connector.

Thermally protected. Lamp

included.

Optics

Lens: Tempered glass lens.

Convex lens clear (CLC) is

standard. Convex lens frosted

(CLF) also available.

Electrical

Power module: Sealed

unit encapsulated in an

engineered composite resin

to eliminate all water entry.

High power factor ballast.

Conduit entry/junction

box: Two 3/4" NPT. 25 cubic

inches of volume suitable


Fixture/J-box connecting

conduit is 1/2" galvanized

pipe with brass cord seal. IJB

(internal junction boxes) also

are available.

Listings

U.L., C.E., CSA, IP67, NEMKO.

Example: 9350 A 100M 120 FL CLC 34B DEL ASR LP TVG


20-1/2(52.1)


Incandescent

10(25.4)

10-1/2(26.7)

20(50.8)

HID

11-1/2(29.2)

Clear PolycarbonateCover (CPC)

Full EggcrateLouver (FEL)

Directional EggcrateLouver (DEL)

Directional Louver (DL)

11-1/2(29.2)

11-1/2(29.2)

11-1/2(29.2)

Notes1 Only available in 120V.

2 MVOLT is standard if GEB is selected on metal halide lamps.

3 CLC is the default if lens option is not chosen.

4 100W max. for all lamp types.

5 SF available with 120V, 277V or 347V only.

6 DF available with 208V or 240V only.

7 Electronic ballasts only are available with metal halide lamps.

8 Finish available on aluminum fixture only.

Well Lights

Visit www.hydrel.com for monochromtic LED specifications.


PRODUCT INFORMATION

HYD

REL


IN-G

RA

DE

Series Orientation Material Lamp type LED color

9360DO Drive-overcapacity

UP Flange up

DN Flange down

B Bronze LED10

12LED 12W

Low voltage

M50 MR16, GX5.3

M75 MR16, GX5.3

P3650ILV PAR36, screw terminal

P3675ILV PAR36, screw terminal

Incandescent1




100Q T4, mini-can

Fluorescent8




MH

20CMT4 T4, G8.52

35CMT4 T4, G8.52

35CMT6 T6, G129

70CMT4 T4, G8.52

70CMT6 T6, G129




CLW Cool white


WMW Warm white

AMB Amber

BLU Blue

CYN Cyan

GRN Green

RED Red

RBL Royal blue

Voltage Distribution Lens Conduit entry Options11 Lamped

123

120

208

220

240

277

347

MVOLT4

NSP Narrow spot11

SP Spot

NFL Narrow flood11

MFL Medium flood

FL Flood11

WFL Wide flood

WWD Wall wash7,11

LSD Linear Spread12

FLC Flat lens clear 34B 3/4" NPT bottom Fusing5

SF Single fuse

DF Double fuse

Ballast


LP Lamp installed

9360DODrive-Over Flush-Mounted Uplight

Intended Use

Hydrel's Model 9360DO, is a

bronze well light, incorporat-

ing some of the internal

components of our M9400

Series. This fixture features

drive-over capacities, capable

of supporting a wide variety

of vehicle types and loads.

The soils engineer or

pavement designer must

properly design this fix-

ture into the supporting

soil, subbase and finish-

ing surface. A properly de-

signed pavement section

could support the fixture

for vertical and lateral

loads up through AASHTO

HS20 (20-ton truck; 16000

Ibs. per wheel load @ 15

miles per hour). The smaller

fixture footprint allows for

placement in tight areas.

Construction

Rough-in section: Cast bronze

frame with stainless steel well.


steel, sealed and purged

of all moisture to 100°F.

Electrical access to lamp

module is done through

submersible rated connec-

tor. Thermally protected.

Optics

Lens: Tempered clear flat

borosilicate glass.

Electrical





LED driver is encapsulated

in a custom-designed heat-

dissipating epoxy resin that

also eliminates all moisture

intrusion. Module is provided


leads for connection to


lamp module.

Conduit entry: Bottom open-

ings are available in the cast

bronze junction box. Suitable


Example: 9360DO DN B 70CMT6 120 NSP FLC 34B LP


Flange UpFlange Down

16-1441.3)

16-1441.3)

8-3/8(21.3)

11(27.9)



2 Lamps available with GEB electronic MVOLT (120V-277V) ballast only.

3 Available for low-voltage lamps only. Remote 12V power supply required.

4 MVOLT is standard on all fluorescent lamps and metal halide lamps with GEB ballast option.

5 SF only valid with 120V, 277V or 347V. DF only valid with 208V, 220V, or 240V.

6 Only valid with metal halide lamps.

7 WWD only valid with T4 lamps and fluorescent lamps.

8 Only available with WWD, ASY or MFL distributions.

9 Only available with NSP or MFL distributions.

10 Only available with MVOLT.

11 Not available with LED.

12 Only valid with LED.

Well Lights

LED

H

Flange Down Flange Up

H

8-3/8(21.3)

11(27.9)

Low Voltage/ Incandescent Fluorescent HID

Height: 16-1/4 (41.3) 19 (48.3) 22-1/2 (57.2)


PRODUCT INFORMATION

HYD

REL


FLO

OD

Series Lamp type Voltage Distribution Mounting Mounting accessories

7000 Incandescent1

100Q T4, MC

Fluorescent2

26TRT GX24Q-3

32TRT GX24Q-3

42TRT GX24Q-3

Metal halide

50M E17, medium

70M E17, medium


70CM E17, medium

35CMT6 T6, G12

70CMT6 T6, G12


35S E17, medium1

50S E17, medium

70S E17, medium

120

208

240

277

347

120/277

MVOLT2

TB

TSP Tight spot3

NHSP Narrow horizontal spot3

MFL Medium fl ood3

FL Flood4

KM Knuckle mount

YM Yoke mount

See page 664.

Options Lamped Finish



IHL Internal honeycomb louver6, 7

CFAMB Color fi lter amber7

CFRED Color fi lter red7

CFBLU Color fi lter blue7

CFGRN Color fi lter green7


BD Barn doors

GS Glare shield

LPI Lamp included BL Black

BZ Bronze

DDB Dark bronze


GN Green

GR Gray

SND Sand

STG Steel gray


WH White

CF Custom

7000Intended Use

The 7000 Series fl oodlight is a

compact, high-performance

outdoor fi xture used for fa-

cade and landscape lighting.

Construction

Material: Die-cast aluminum

housing and door.

Finish: Polyester powder

coated in a range of textured

or semi-matte fi nishes.

Fasteners: Stainless steel.

Weight: 20 lbs.

EPA: 0.64.

Optics

Lens: Flat tempered glass.

Refl ector: High-purity anod-

ized specular, semi-specular

or patterned lighting sheet

in various confi gurations de-

signed to provide maximum


Electrical

Lamp: Incandescent – T4,

mini-can to 100W. Fluores-

cent – TRT triple-tube lamps

to 42W. HID – T6, G12 to 70W;

E17 medium-base to 70W.

Note: All lamps must be

rated for "Universal Burning

Position" because fi xture tilt

changes lamp orientation.

Socket – Incandescent

– Mini-can screw base.

Fluorescent – 4-pin, GX24Q

base. HID – G-12, medium, or

E27 base pulse-rated 4KV.

Electrical components: Inte-

grally mounted ballasts rated

for low temperatures.

Listings

U.L., C.U.L., IP65, suitable for

wet locations.

Example: 7000 70M 120 FL YM SMSA18 BD LPI BL


6(15.2)

11-3/4(29.8)

5-3/4(14.6)


Knuckle Mount

8-1/4(21.0)

11-3/4(29.8)

13-7/8(35.2)

Yoke MountNotes1 Available in 120V only.

2 MVOLT is the standard voltage for fl uorescent lamps.

3 Available with T6 and T4 lamps only.

4 Available with E17 and TRT lamps only.

5 Available with TSP and MFL distributions only.

6 Available with FL distribution only.

7 Not available with NHSP.


*Mounting not included.

Floodlighting


PRODUCT INFORMATION

HYD

REL


FLOO

D

Series Lamp type Voltage Distribution Mounting Mounting accessories

7100 Incandescent

250Q T4, MC

300Q T3, RSC

400Q T3, RSC

500Q T3, RSC

Metal halide

70M E17, medium

100M E17, medium

150M E17, medium


70CM E17, medium

70CMT6 T6, G12

100CM E17, medium

150CM E17, medium

150CMT6 T6, G12

70CMTD T7, RSC

150CMTD T7, RSC


50S E17, medium

70S E17, medium

100S E17, medium

150S E17, medium

120

208

220

240

277

347

120/277

TB

NSP Narrow spot1

NHSP Narrow horizontal spot2

SP Spot

HSP Horizontal spot

HFL Horizontal flood2

VFL Vertical flood

WFL Wide flood

KM Knuckle mount

YM Yoke mount

See page 664.









BD Barn doors

GS Glare shield5

LC Polycarbonate cover5

Fusing

SF Single fuse6

DF Double fuse7

Re-strike

QRS Quartz emergency re-strike ballast8

QRSTD Quartz emergency re-strike time delay8

Photo control

PE Photo eye


BZ Bronze

DDB Dark bronze


GN Green

GR Gray

SND Sand

STG Steel gray


WH White

CF Custom

7100Intended Use

The 7100 Series floodlight is a

compact, high-performance

outdoor fixture used for fa-

cade and landscape lighting.

Construction


housing and door.



or semi-matte finishes.


Weight: 37 lbs.

EPA: 1.27.

Optics

Reflector: High-purity anod-

ized specular, semi-specular,

patterned lighting sheet in

various configurations de-

signed to provide maximum


Lens: Flat tempered glass

standard.

Electrical


RSC quartz to 500W; T4, mini-

can to 250W. HID – T6, G12 to

150W, E17 medium-base to

150W; elliptical, E27 to 150W.

Note: All lamps must be

rated for "Universal Burning

Position" because fixture tilt

changes lamp orientation.

Socket: Incandescent –

Recessed single contact

(RSC), mini-can screw base.

HID – G12, medium or E27

base pulse-rated 4KV.



for low starting temp.

Installation

Mounting: Knuckle or yoke

mounted (180° vertical,

360° rotation); fixed

mounted for ceiling or wall.

Knuckle mount – Die-cast

aluminum with 3/4" NPT

galvanized nipple standard.

Yoke mount – Aluminum

with 10' of 18-3 STW flexible

cord polymer. Yoke mount

caps have black finish.

Listings


wet locations.

Example: 7100 150M 120 VFL KM WMSA BD SF LPI BL


15-3/4(40.0)

13-1/4(33.7)

18-1/2(47.0)


Knuckle Mount

15-3/4(40.0)

6-3/4(17.1)

9-1/4(23.5)

6-3/4(17.1)

16-1/2(41.9)

Yoke Mount

Notes1 Available with 70CMT6, 150CMT6 and 250Q lamps only.

2 Not available with RSC base lamps.

3 Not available with VFL or WFL distributions.


5 Not available with CM mounting.

6 Available with 120V, 277V or 347 HID only.

7 Available with 208V, 220V or 240V HID only.

8 Not available with NSP, WFL and HSP distribution.

Floodlighting


PRODUCT INFORMATION

HYD

REL


FLO

OD

Series Lamp type Voltage Distribution Mounting Mounting accessories Options

7200 Metal halide1

200M2, 11

250M

320M12

350M2, 12

400M


250S

400S

120

208

240

277

347

120/277

TB

NHSP Narrow horizontal spot

SP Spot

HSP Horizontal spot

HFL Horizontal flood

VFL Vertical flood

WFL Wide flood

KM Knuckle mount

YM Yoke mount

See page 664. Internal accessories







BD Barn doors

GS Glare shield

LC Polycarbonate cover

EGL Ext. grid louver5

Fusing

SF Single fuse6

DF Double fuse7

Receptacle

PER Photocell receptacle8

Options (continued) Lamped Finish

Ballast

SCWA Super CWA pulse start10

Re-strike


LPI Lamp included

LPIH Lamp included (horizontal burn)12

LPIV Lamp included (vertical burn)11, 12

BL Black

BZ Bronze

DDB Dark bronze


GN Green

GR Gray

SND Sand

STG Steel gray


WH White

CF Custom

7200400W max.

Intended Use

The 7200 Series floodlight is a

high-performance fixture used

for facade and area lighting.

Construction


housing and door.



semi-matte finishes.


Weight: 50 lbs.

EPA: 3.00.

Optics

Reflectors: High-purity anod-

ized specular, semi-specular,


in various configurations

designed to provide optimum

optical performance. Reflec-

tors are interchangeable using

four screws and quick-release

electrical connectors (with the

exception of spot reflectors).

Reflectors include both

segmented and hydroformed

types to provide maximum



Electrical

Lamp: HID to 400W.

Socket: Porcelain mogul base

rated 5KV.



for low temperatures.

Installation

Mounting: Knuckle or yoke

mounted (180° vertical, 360°

rotation) on pole, stanchion,

wall or tenons.

Listings


wet locations.

Example: 7200 400M 277 WFL KM EWM24 SCWA LPI BZ


23-3/8(59.4)

21-5/8(54.3)

14-1/2(36.7)

10-3/8(26.4)


Knuckle Mount

23-3/8(59.4)

27-1/2(69.9)

14-1/2(36.7)

10-3/8(26.4)

17-5/8(44.8)

Yoke Mount

Notes1 Available only with SCWA ballast.

2 200M and 350M are not available with SP distribution.

3 Not available with WFL distribution.


5 EGL accessory available in matte black finish only.



8 NEMA twist-lock receptacle only; photocontrol by others.

9 Not available with TB, NHSP, SP, WFL or HSP.

10 Required on 200M, 250M, 320M, 350M or 400M.

11 LPIV required on 200M.

12 LPIH or LPIV required on 320M or 350M.

Floodlighting


PRODUCT INFORMATION

HYD

REL


FLOO

D

Series Lamp type Voltage Distribution Mounting Mounting accessories1 Options

7200 750M12

1000M

1000S

120

208

240

277

347

120/277

TB

NHSP Narrow horizontal spot

SP Spot

HSP Horizontal spot

HFL Horizontal flood

VFL Vertical flood

WFL Wide flood

KM Knuckle mount

YM Yoke mount

SMB Surface mounted ballast

SMBEWM SMB extended wall mount

SMBPMT Pole mount tee2

SMBSMSA SMB stanchion mount

SMBSMT SMB stanchion mount tee2

SMBTNM SMB tenon mount3

SMBR SMB remote mount




BD Barn doors

GS Glare shield

EGL Ext. grid louver6


Fusing

SF Single fuse7

DF Double fuse8

Photocontrol


Ballast

SCWA Super CWA pulse-start11

Re-strike



BZ Bronze

DDB Dark bronze


GN Green

GR Gray

SND Sand

STG Steel gray


WH White

CF Custom

72001000W max.

Intended Use

The 7200 Series flood is

designed for use in facade

and area lighting.

Construction


housing and door.



or semi-matte finishes.


Weight: 40 lbs. Head only;

does not included ballast.

EPA: 3.00.

Optics

Reflectors: High-purity anod-



in various configurations to

provide optimum optical

performance. Reflectors are

interchangeable using four

screws and quick-release

electrical connectors (with

the exception of spot reflec-

tors). Reflectors include both

segmented and hydroformed




Electrical

Lamp: HID to 1000W.

Socket: Porcelain mogul base

rated 5KV.

Electrical components: Exter-

nally mounted ballasts rated

for low starting temp. Ballast

box must be specified.

Listings


wet locations.

Example: 7200 1000M 120 VFL KM SMB GS LPI BZ


23-3/8(59.4)

21-5/8(54.3)

14-1/2(36.7)

10-3/8(26.4)


Knuckle Mount

23-3/8(59.4)

27-1/2(69.9)

14-1/2(36.7)

10-3/8(26.4)

17-5/8(44.8)

Yoke Mount

Notes1 If not selected, fixture will ship less ballast.

2 Two fixtures per mount.

3 For use with KM only.

4 Not available with WFL distribution.


6 EGL available in matte black finish only.

7 Available with 120V, 277V or 347V only.

8 Available with 208V or 240V only.


10 Not available with 480V or TB, NHSP, SP, WFL or HSP distribution.

11 SCWA required in 750M, optional om 1000M.

12 750M not available with SP or HFL distribution.

Floodlighting


PRODUCT INFORMATION

HYD

REL


FLO

OD

Accessories

7200

22-7/8(58.1)

22-7/8(58.1)

22-7/8(58.1)

14(35.6)

14(35.6)

11-3/8(28.9)

10(25.4)

4(10.2)

5-3/8(13.7)

5-3/8(13.7)

16-3/4(42.5)

2-5/8(6.7)

LCLexan Covers

BDBarn Door

EGEternal Grid Louver

GSGlare Shield

MOUNTING ACCESSORIES3

SERIES TYPE MOUNT NOM. N/A

ARJB

FJB

PMSA

PMT

SMSA

HYDS

MDB

TRJB

EWM

TNM

PAR

PAS

PATR

PATS

SMB

SMBE

WM

SMBS

MSA

SMBS

MT

SMBP

MT

SMBT

NM

SMBR

7000 Adjustable Knuckle KM 1 2 2 2 2 1, 2 1, 2

7000 Adjustable Yoke YM 1 2 2 2 2 1, 2 1, 2

7100 Adjustable Knuckle KM 1 2 2 2 2 1, 2 1, 2

7100 Adjustable Yoke YM 1 2 2 2 2 1, 2 1, 2

7100 FixedWall Side/ Down/Up

WMS/WUS

7100 Fixed Ceiling CM

7200 400W Adjustable Knuckle KM 1 2 2 2 2 1, 2 1, 2

7200 400W Adjustable Yoke YM 1 2 2 2 2 1, 2 1, 2

7200 1000W Adjustable Knuckle KM 1 1

7200 1000W Adjustable Yoke YM 1 1

7000

6(15.2)

11-3/4(29.8)

2-3/8(6.0)

2-3/8(6.0)

BD

Barn Doors

6(15.2)

11-3/4(29.8)

GS

Glare Shield

7100

BD Barn Doors

GS Glare Shield

LC Polycarbonate Cover

4(10.2)

4(10.2)

1-3/4(4.5)

15-3/4(40.0)

15-3/4(40.0)

15-3/4(40.0)

9-3/4(24.8)

9-3/4(24.8)

9-3/4(24.8)

7000 SERIESAccessories

ARJB Architectural junction boxFJB Flush mount juction boxPMSA Pole mountPMT Pole mount tee

SMSA Stanchion mountHYDSMDB Stanchion mount direct burialTRJB Tree mount junction boxEWM Extended wall mount

TNM Tenon mountPAR Pole arm roundPAS Pole arm squarePATR Pole arm twin round

PATS Pole arm twin squareSMB Surface mounted ballastSMBEWM SMB extended wall mountSMBSMSA SMB stanchion mount

SMBSMT SMB stanchion tee mountSMBPMT SMB pole mount teeSMBTNM SMB tenon mountSMBR SMB remote mount

Notes1 Two fixtures per mounting.

2 Multiple lengths available, consult specification sheets.

3 For more mounting information, see pages 669 and 676-677.

PRODUCT INFORMATION

HYD

REL


FLOO

D

Series Lamp type Voltage Distribution MountingMounting accessories

8100 Incandescent

100Q T4, mini can

150Q T4, mini can

250Q T4, mini can

Fluorescent1

42TRT G24Q-3

2/42TRT G24Q-3

Metal halide

50M ED17, medium

70M ED17, medium

100M ED17, medium

150M ED17, medium


70CMT6 T6, G12

150CMT6 T6, G12


50S ED17, medium

100S ED17, medium

150S ED17, medium

120

208

240

277

347

120/277

TB

MVOLT2

Floodlights3

NSP Narrow spot4

SP Spot

NFL Narrow flood

MFL Medium flood

FL Flood

WFL Wide flood

VWFL Vertical wide flood5

Area lights

SR2 IES type II

SR3 IES type III

SR4SC IES type IV

SR5S IES type V

AWM Adj. wall mount

AWMDE Adj. wall mount, direct entry

YM Yoke mount

PMEF Pole mount flat, square pole

PME3 Pole mount 3" diameter, round pole


See page 668.





VSF Vertical spread filter






BD Barn doors

FGS Full glare shield

HGS Half glare shield


WRG Wire rock guard

Photocontrol

PER Photocell9

Fusing

SF Single fuse10

DF Double fuse11

Ballasts


MLEBAD Electronic analog dimming12, 13

EL N Battery backup (for (2) 42TRT only)5

EL NICE Battery backup for operation in low temperature conditions (for (2) 42TRT only)5

LPI Lamp included

BL Black

BZ Bronze

DDB Dark bronze


GN Green

GR Gray

SND Sand

STG Steel gray


WH White

CF Custom

8100Intended Use

The 8100 Series is a high-

performance compact

precision lighting system

that provides consistent

styling with a variety of light

distributions. Multiple opti-

cal systems provide a wide

range of precise light control.

For use in facade, area and

pathway lighting.

Construction

Material: Die-cast, copper-

free aluminum (A360) hous-

ing and doors.

Finish: Textured TGIC powder

coat polyester finish.

Weight: 26.5 lbs. max.

EPA: 1.41.

Optics








for maximum resistance to

impact and thermal shock.

Electrical

Lamp: ED17 medium-base to

150W, T6, G12 base to 150W;

quartz T4 mini-can base

to 250W.

Ballast: High power factor mag-

netic core and coil standard.

Electronic ballast optional.

Installation

Mounting: AWM – cast

aluminum wall mount plate

for mounting over 4-0/4-S

recessed J-box. AWMDE –

surface conduit direct entry

available for through-branch

wiring; 3/4" NPT drilling stan-

dard. PM – steel mounting

plates for attachment to pole

using a unique block/receiver

assembly. The block bolts

to a pole and engages the

receiver within the 8100 in-

tegral arm. A single threaded

locking fastener secures the

fixture to pole. YM – 1-1/2"

wide aluminum yoke, 15° up/

down adjustment and stain-

less steel locking hardware

allows fixture head to easily

be aimed and fixed in place.

Fixtures are provided with a

minimum of 10' of 18/3 STW

cord for power supply.

Listings

U.L., C.U.L., IP67.

Example: 8100 150M MVOLT NFL YM SMSA18 BD GEB LPI BL


D.E. (direct entry)

8-1/8(20.6)

14-3/4(37.5)

10(25.4)

5-1/8(13.0)


Adjustable Wall Mount

10(25.4)

8-1/8(20.6)

14-1/8(35.7)

5-1/8(13.0)

Yoke Mount

5-1/8(13.0)

12-1/4(31.1)

17-1/4(43.8)

10(25.4)

Pole Mount

Floodlighting

Notes1 Available with flood (FL) distribution.

2 MVOLT is standard on all fluorescent lamps (unless ELN is selected) and metal halide lamps with GEB or MLEBAD option.

3 Floodlight distributions are not available with PMEF, PME3 or PME4.

4 Available for G12 and mini-can bases only. NSP = spot distribution with ISS.


6 Not available with SR2, SR3, SR5; standard on NSP and SR4SC.


8 HS only available with SR2 and SR3 distributions and not available with yoke mount.

9 PE not available with yoke mount.

10 SF is available with 120V, 277V or 347V on HID only.

11 DF is available with 208V, 220V or 240V on HID only.

12 Electronic ballasts only are available with metal halide lamps (150W max.) and MVOLT voltage.

13 0-10V dimmer not included.


PRODUCT INFORMATION

HYD

REL


FLO

OD

Series EmergencyLamp type Voltage Distribution Mounting

Mounting accessories Options Lamped Finish

8100 EO Fluorescent

2/42TRT

120

277

FL Flood AWM Adj. wall mount


YM Yoke mount



See page 668.

ICE For low-ambient conditions

RTSW Remote test switch

LPI Lamp included

BL Black

BZ Bronze

DDB Dark bronze


GN Green

GR Gray

SND Sand

STG Steel gray


WH White

CF Custom

8100Emergency Only

Intended Use

The 8100 EO Series is a

high-performance emergency

compact fluorescent lighting

system. Recommended ap-

plications are areas along the

path of egress, educational,

athletic fields, health care and

commercial facilities needing

standby of emergency illumi-

nation. For use in facade, area

and pathway lighting.

Construction



ing and doors.


coat polyester finish.

Weight: 25 lbs.

EPA: 1.5.

Electrical

Lamp: Two 42W Gx24q-4 base

compact fluorescent lamps.

Illumination time: 90

minutes.

Total lumen output: 6400

lumens.

Test switch: Single pole.

Recharge time: 24 hours.

Operation: When the normal

supply of AC power fails, the

8100 EO instantly switches to

the emergency mode, keep-

ing two compact fluorescent

lamps illuminated for a

minimum of 90 minutes at

full output. When AC power

is restored the emergency

system returns to the normal

mode. Ambient temperature

-20°C to 55°C with ICE option.

Charging indicator light: LED.

Input voltage: 120V or 277V,

60Hz.

Installation

Mounting: YM – 1-1/2" wide

aluminum yoke and stainless

steel locking hardware

allows fixture head to easily

be aimed and fixed in place.



cord for power supply. AWM

– Cast aluminum wall mount

plate for mounting over

4-0/4-S recessed junction

box. 15° up/down adjust-

ment. AWMDE – Surface

conduit direct entry available

for through-branch wiring;

3/4" NPT drilling standard.

PM – Steel mounting plates

for attachment to pole using

a unique block/receiver

assembly. The block bolts to a

pole and engages the receiver

within the 8100 integral arm.

A single threaded locking

fastener secures the fixture

to pole.

Listings

U.L., C.U.L., IP67.

Example: 8100 EO 2/42TRT 120 FL YM LPI BL


D.E. (direct entry)

14-3/4(37.5)

10(25.4)

5-1/8(13.0)



10(25.4)

14-1/8(35.7)

5-1/8(13.0)

Yoke Mount

5-1/8(13.0)

12-1/4(31.1)

17-1/4(43.8)

10(25.4)

Pole Mount

Floodlighting


PRODUCT INFORMATION

HYD

REL


FLOO

D


8200 Metal halide1

200M

250M

320M

350M

400M


250S

400S

120

208

240

277

347

120/277

TB

MVOLT2

Floodlights3

SP Spot

NFL Narrow flood

MFL Medium flood

FL Flood

WFL Wide flood

HSP Horizontal spot

VFL Vertical flood

HFL Horzontal flood

Area lights

SR2 IES type II

SR3 IES type III

SR4SC IES type IV

SR5S IES type V

AWM Adj. wall mount


YM Yoke mount

PMEF Pole mount flat, square pole



See page 668. Internal accessories5







BD Barn doors


External accessories5 (continued)




WRG Wire rock guard

Photocontrol


Fusing

SF Single fuse7

DF Double fuse8

Ballasts


SCWA Super CWA pulse start10


BZ Bronze

DDB Dark bronze


GN Green

GR Gray

SND Sand

STG Steel gray


WH White

CF Custom

8200Intended Use

The 8200 Series is a high-

performance precision

lighting system that provides

consistent styling with a

variety of light distributions.

Multiple optical systems pro-

vide a wide range of precise

light control. For use in facade,

area and pathway lighting.

Construction



ing and doors.


coat polyester finish (see order-

ing guide for available colors).

Weight: 29.5 max.

EPA: 1.45.

Optics








for maximum resistance to

impact and thermal shock.

Electrical

Lamp: ED18, ED28 or T15 HID

to 400W maximum. Mogul or

E40 sockets.

Ballast: High power factor mag-

netic core and coil standard.

Electronic ballast optional.

Installation

Mounting: AWM – Cast

aluminum wall mount plate

for mounting over 4-0/4-S re-

cessed junction box. 15° up/

down adjustment. AWMDE:

Surface conduit direct entry

available for through-branch

wiring; 3/4" NPT drilling stan-

dard. PM – Steel mounting

plates for attachment to pole

using a unique block/receiver

assembly. The block bolts to a

pole and engages the receiver

within the 8200 integral arm.

A single threaded locking

fastener secures the fixture

to the pole. YM – 1-1/2" wide

aluminum yoke and stainless

steel locking hardware allows

fixture head to be easily

aimed and fixed in place.



cord for power supply.

Listings

U.L., C.U.L., IP67.

Example: 8200 250M 120 SR2 AWM HS LPI SND


7-3/8(18.7)

20-3/4(52.7)

15-1/2(39.4)

D.E. (direct entry)

13-1/2(34.3)



15(39.4)

13-1/2(34.3)

20-1/8(51.1)

7-3/8(18.7)

Yoke Mount

7-3/8(18.7)

17-3/4(45.1)

22-3/4(57.8)

15-1/2(39.4)

Pole Mount

Notes1 SCWA standard.

2 MVOLT is the default if GEB is selected; only valid on metal halide lamps.

3 Flood light distributions not available with PMEF, PME3 and PME4 mountings.

4 ISS comes standard on the VFL and SR4SC distributions. ISS is not available with FL, HFL, WFL, SR2, SR3 and SR5S distributions.


6 HS available with SR2 and SR3 distributions only.



9 Electronic ballasts are only available with metal halide lamps 250-400W, 208-277V only.

10 SCWA ballasts are required with metal halide lamps.

11 Not valid with SR2, SR3, SR4SC or SR5S.


Floodlighting


PRODUCT INFORMATION

HYD

REL


FLO

OD

Notes1 Two fixtures per mounting.

2 Multiple lengths available; consult specification sheets.

3 For more mounting information, see pages 669 and 676-677.

MOUNTING ACCESSORIES3

SERIES TYPE MOUNT NOMENCLATURE N/A ARJB FJB PMSA PMT HYDSMDB TRJB EWM PAR PAS PATR PATS SMSA_

8100 Adjustable Yoke YM 1 2 2 2 1, 2 1, 2 1, 2

8100 Adjustable Wall AWM/AWMDE

8100 Fixed Pole PMEF/PME3/PME4

8200 Adjustable Yoke YM 1 2 2 2 1, 2 1, 2 1, 2

8200 Adjustable Wall AWM/AWMDE

8200 Fixed Pole PMEF/PME3/PME4

Accessories

BD Barn doors

Four door set; each door mounts independently.

HS House side shield cuts nuisance glare.

FGS Full glare shield 360° full cutoff.

ISS Internal source shield eliminates lamp source glare.

HGS Half glare shield cuts upward glare.

WRG Wire guard for additional safety protection.

8100 & 8200 SERIESAccessories

ARJB Architectural junction boxFJB Flush mount juction boxPMSA Pole mountPMT Pole mount tee

HYDSMDB Stanchion mount direct burialTRJB Tree mount junction boxEWM Extended wall mountPAR Pole arm round

PAS Pole arm squarePATR Pole arm twin roundPATS Pole arm twin squareSMSA_ Standard mounting splice access available in 12"- 48" in 6" increments

PRODUCT INFORMATION

HYD

REL


MO

UN

TING

ACCESSOR

IESSMB Mounting

6-1/2(16.5)

6-1/2(16.5)

19(48.3)

Knuckle Yoke

8-1/4(30.0)

8-1/4(30.0)

Knuckle Yoke

6-1/2(16.5)

6-1/2(16.5)

10-1/2(26.7)

9-1/2(24.1)

9-1/2(24.1)

18-1/4(46.4)

27-1/2(69.9)

18-1/4(46.4)

6-1/2(16.5)

6-1/2(16.5)

19(48.3)

19(48.3)Yoke

Knuckle

8-1/4(30.0)

8-1/4(30.0)

Yoke

Knuckle

9-1/2(24.1)

9-1/2(24.1)

9-1/2(24.1)

9-1/2(24.1)

31-1/4(79.4)

31-1/4(79.4)

Yoke

6-1/2(16.5)

6(15.2)

22 (55.9)

38(96.5)

6(15.2)

6-1/2(16.5)

22 (55.9)

Knuckle

8-1/4(30.0)

38(96.5)

Yoke

Knuckle

6-1/2(16.5)

38(96.5)

38(96.5)

8-1/4(30.0)

8-1/4(30.0)

6-1/2(16.5)

19(48.3)

8-1/4(30.0)

SMBTNM Tenon Mount

SMB SMB Ballast

SMBSMT Stanchion Tee Mount

SMBSMSA Stanchion Mount SMBPMT Pole Tee Mount

SMBR Remote Mount (Can be used for a wide variety of mounting placements.)

SMBEWM Extended Wall Mount

PRODUCT INFORMATION

HYD

REL


MO

UN

TIN

G A

CCES

SOR

IES Accessories

Type Height Nominal shaft base size/Wall thickness

HYDSSAG2 Square, straight, aluminum, G2

HYDSSA Square, straight, aluminum

HYDSSS Square, straight, steel

HYDRSA Round, straight, aluminum

HYDRSS Round, straight, steel

Specify height, see Configurations table below. Nominal shaft base size Wall thickness

3.75 B .120

4 C .125

4.5 E .156

5 G .188

6 J .250

Fixture mounting methods1 Options Finish

Mounting

PT Open top

Tenon mounting

T20 2-3/8” O.D.

T25 2-7/8” O.D.

G2XTEND drill mounting

DM19G2 Single luminaire drilling

DM28G2 Two luminaires at 180°

DM29G2 Two luminaires at 90°

DM39G2 Three luminaires at 90°

DM49G2 Four luminaires at 90°

8100/8200 PM drill mounting

DM19AS Single luminaire drilling

DM28AS Two luminaires at 180°

DM29AS Two luminaires at 90°

DM39AS Three luminaires at 90°

DM49AS Four luminaires at 90°

PER NEMA twist-lock receptacle only located at pole top2

L/AB Less anchor bolts

VD Vibration damper

TP Tamper-proof screws provided with base cover

H __ Horizontal arm3, 4

FDL _ Festoon duplex outlet less electrical3

FGL _ Festoon GFI outlet less electrical3

HH __ Extra handhole3, 5

Standard colors

BL Black

BZ Bronze

DDB Dark bronze


GN Green

GR Gray

SND Sand

STG Steel gray


WH White

Designer colors

DBLB Designer black, textured

DSPD Dark gray, textured

DNAT Natural aluminum, textured

DWHG Designer white, textured

DDBT Dark bronze, textured

DSPF Rust, textured

DSST Sandstone, textured

CF Custom

Example: HYDDSSAG2 16 3.75J T20 DDB


Poles: For detailed technical information, EPAs and wind map, please visit www.hydrel.com.

NOTES:

1 When ordering tenon mounting and drill mounting for the same pole,

follow this example: DM28G2/T20. The combination requires an extra handhole.

2 NEMA twist-lock photocontrol by others. Not available with tenon mounting.

3 Must specify location and orientation when ordering an option.

For first space _ : Specify the height in feet above base of pole. Example: 5' = 5 and 20'= 20

For second space _ : Specify orientation from handhole (A,B,C,D).

Refer to the handhole orientation diagram on this page.

4 Horizontal arm is 18” x 2-3/8” O.D. tenon standard.

5 Combination of tenon-top and drill mount requires extra handhole.

18"

HYDRSA

Nut cover disc

18"

B

18"

HYDSSA HYDSSS

HYDRSS

CONFIGURATIONSPOLE HEIGHT (FT) NOMINAL SHAFT BASE SIZE WALL THICKNESS

HYDSSAG2 10 - 16 3.75 JHYDSSA 8 - 35 4, 5, 6 C, G, J

HYDSSS 10 -39 4, 5, 6 C, GHYDRSA 8 - 30 4, 4.5, 5, 6 C, E, GHYDRSS 8 - 35 4, 4.5, 5 B


CAUTION: This pole selection process is a guideline only. Hydrel® and Acuity Brands® assume no responsibility for selec-tion, and we recommend consultation with qualified individuals for verification of luminaire/pole assembly selection.

POLES

PRODUCT INFORMATION

HYD

REL


FLOO

D


2100 Incandescent1

100Q

150Q

250Q

Ceramic metal halide2

35CMT6

70CMT6

150CMT6

120

208

240

277

347

120/277

MVOLT3

TB

RN Rectangular narrow

RM Rectangular medium

RW Rectangular wide

YM Yoke mount See page 675. External accessories4


GS Half glare shield

VSR Visor

Fusing

SF Single fuse5

DF Double fuse6

Ballasts7



Cord set length Lamped Finish

CSL_ 10'-50' of cord (available in 5' increments) LPI Lamp included BL Black

BZ Bronze

DDB Dark bronze


GN Green

GR Gray

SND Sand

STG Steel gray


WH White

CF Custom

2100Intended Use

The 2100 Series is a compact,

high-performance lighting

fixture available with

incandescent or HID lamp

types. Several ideal distribu-

tions are offered for a wide

variety of applications. The

2100 Series yoke-mounted

unit also includes multiple

mounting accessories.

Construction

Material: Rugged heavy wall

cast aluminum body and

hinged door. All fasteners are

stainless steel.

Lens: High-strength curved,

tempered glass.


coat polyester finish (see order-

ing guide for available colors.

Electrical

Lamp: Incandescent – T4

mini-can to 250W max.

Metal halide – T6, G12 to

150W max.

Socket: Mini-can, screw shell

or G12 base, bi-pin.

Installation

Mounting: Yoke mount with

a minimum of 10' 18/3 STW

cord. Cord length must be

specified.

Listings

U.L., C.U.L., suitable for wet

locations.

Example: 2100 70CMT6 120 RN YM RACB GS SF CSL10 LPI BL


7-3/4(19.7)

5-3/4(14.6)

5-1/2(14.08-3/4

(22.2)

4(10.2)


Notes1 Available in 120V only.

2 Requires HID ballast enclosure.

3 MVOLT is standard on all metal halide lamps with GEB ballast option.



6 DF is available with 208V or 240V on HID only.

7 Only available with 35CMT6 and 70CMT6 with MVOLT voltage.

8 For use with 0-10V analog dimmer (by others). Additional electrical conductors are required.

Floodlighting


PRODUCT INFORMATION

HYD

REL


FLO

OD


4740 Fluorescent

26TRT GX24Q-3

32TRT GX24Q-3

MVOLT WFL Wide flood YM Yoke mount ARJB Arch. J-box

WMP Wall-mount plate

WMSA Wall-mount with splice access

EWM_ Extended wall mount 1

PSSA Pedestal stanchion-mount

PMSA Pole-mount with splice access

SMSA_ 12" - 48" stanchion-mount; available in 6" increments 1

FJB Flush junction box

PSS_ 18", 24" or 36" polymer sealed ground spike 1


FVSR Full visor

HVSR Half visor

TPH Tamper-proof hardware

Cord set length Lamped Finish

CSL_ 10' - 50' of cord, available in 5' increments LPI Lamp included BL Black

BZ Bronze

DDB Dark bronze


GN Green

GR Gray

SND Sand

STG Steel gray


WH White

CF Custom finish

4740Compact Fluorescent

Intended Use

Hydrel's 4740 compact

fluorescent lighting fixture

brings fluorescent lamp per-

formance to smaller outdoor

applications. These are ideal

for soft, even illumination

within smaller planters, and

along walls and signs.

Construction

Material: Extruded aluminum

with die-cast aluminum

end caps.

Cord: Supplied with a mini-

mum of 10' of 18-3 cable. Cord

length must be specified.


Optics

Distribution: WFL – wide

flood.

Lens: Polycarbonate.

Electrical

Lamp: One (1) compact

fluorescent, 32W Max. For 42W

please consult factory.

Socket: GX24Q 4-pin.

Ballast: Electronic multi-volt,

0°F (-18°C) minimum starting

temperature.

Installation

YM: Yoke mount.

Listings

U.L., CUL.

Note: Hydrel reserves the

right to modify specifica-

tions without notice. Any

dimension on this sheet is to

be assumed as a reference

dimension: "Used for infor-

mation purposes only. It does

not govern manufacturing

or inspection requirements."

(ANSI Y14.5-1973.)

Example: 4740 32TRT MVOLT WFL YM ARJB FVSR CSL30 LPI DDB


12(30.5)

10-1/4(26.0)

4(10.2)

4-1/2(11.4)


Linear Floodlighting

Notes1 Multiple lengths available, consult specification sheets .


PRODUCT INFORMATION

HYD

REL


FLOO

D

Series Lamp type Voltage Distribution MountingMounting accessories

4752

4753

4754

4756

4758

4752

14T5 14W T5

2/14T5 Two 14W T51

24T5HO 24W T5HO

2/24T5HO Two 24W T5HO1

4753

21T5 21W T5

2/21T5 Two 21W T51

39T5HO 39W T5HO


4754

28T5 28W T5

2/28T5 Two 28W T51

54T5HO 54W T5HO


4756

2/21T5 Two 21W T5

4/21T5 Four 21W T51

2/39T5HO Two 39W T5HO

4/39T5HO Four 39W T5HO1

4758

2/28T5 Two 28W T5

4/28T5 Four 28W T51

2/54T5HO Two 54W T5HO

4/54T5HO Four 54W T5HO1

MVOLT2

347

WWD Wall wash

VFL Vertical fl ood

NFL Narrow fl ood

MFL Medium fl ood

WFL Wide fl ood3

KM Knuckle mount

AWM Adjustable wall mount7

See page 675.

Runs Options Cord set length6 Lamped Finish

ETE End to end10

For runs or end-to-end mounting, see specifi cation sheet on www.hydrel.com


FSS Flush source shield

FVSR Full visor

HVSR Half visor


Electrical

PLPKX Polarpack® cold weather option (120V)4

PLPKY Polarpack® cold weather option (347V)4

PLPKZ Polarpack® cold weather option (208-277V)4

CW20 Cold weather ballast, -20°F (-29°C) starting temperature 5

ELN Emergency battery backup, half output8

CSL_ 10' - 50' of cord, available in 5' increments

LPI 3000°K lamp included

LP35K 3500°K lamp included

LP41K 4100°K lamp included

BL Black

BZ Bronze

DDB Dark bronze


GR Gray

STG Steel gray

WH White

GN Green

SND Sand


CF Custom

4750Intended Use

T5 and T5HO lamp perfor-

mance, high-output sym-

metrical and asymmetrical

distributions and simple

design, make the Hydrel 4750

Series ideal for spreading

soft, even illumination along

walls, signs and planters.

Construction

Material: Extruded A360

aluminum with die-cast

aluminum end caps. All

fasteners are stainless steel.

Optics

Distribution: Wall wash,

narrow fl ood, medium fl ood,

vertical fl ood and wide fl ood.

Lens: Curved high-strength,

optical-grade clear acrylic.

External glare control

available.

Electrical

Lamp: Fluorescent, single or

multiple T5 and T5HO to 54W

per lamp.

Socket: G5 miniature bi-pin.

Voltage: Multi-volt (120V-277V

50/60 Hz) or 347V available.

Ballast: Electronic multi-volt,

-20°F (-29°C) minimum start-

ing temperature with CW20

ballast option.

Polarpack® cold weather

options available. Polarpack®

option will consume up to

19W when operating.

Installation

Mounting: KM – Knuckle

mounted with two 1/2" NPT

side mounting arms. AWM –

Adjustable wall mount with

two side mounting brackets

and minimum of 10' 18/3

STW (US) or 3M 3GX1.0 mm

HO7RN-F (IEC) fl exible cord.

Cord length must be specifi ed.

Listings

U.L., C.U.L.

Example: 4754 54T5HO MVOLT MFL KM WMP FSS LPI DNAT


L

4 -1/2(11.4)

4(10.2)

2-3/8 (6.0)

3 (7.6)

4752 4753 4754 4756 4758 L: 28 (71.1) 40 (101.6) 51 (129.5) 74-1/2 (189.2) 97-1/2 (247.7)


Notes1 Available with WFL distribution only.

2 MVOLT multi-volt ballast range: 120V-277V, 50/60Hz.

3 WFL distribution only available with multiple lamp options as specifi ed with note 1.


5 Only available with WWD and WFL distributions using 54T5HO lamps.

6 Required for AWM mounting only. Specify cord length in feet. Not available with KM.

7 No mounting accessories with AWM.

8 Only available with 4754, 4758 using WWD or WFL distribution; 4756 using WWD distribution.

9 Not available with ELN or MVOLT.

10 ETE only available with KM.

Linear Floodlighting

AWM

KM

KM AWM

L

4(10.2)

1-1/2(3.8)

4752 4753 4754 4758 L: 28-7/8 (73.3) 40-7/8 (103.2) 51-7/8 (131.8) 98-3/8 (249.9)

4-1/2

4-3/4(11.6)

(11.4)


PRODUCT INFORMATION

HYD

REL


FLO

OD

Series Lamp type Voltage

4798

4799

4798

60I T-10, medium1

13DTT Double twin tube, 4-pin

2/13DTT Two double twin tube, 4-pin

18TRT Triple tube, 4-pin




35S E17, medium1

50M E17, medium

4799

54T5HO T5HO, miniature bi-pin

2/54T5HO Two T5HO, miniature bi-pin

32 T8, medium bi-pin

44T8HO T8HO, recessed double contact3

120

208

220

240

277

347

MVOLT2, 3

Mounting accessories Options Lamped Finish

See page 675. External accessories


LPI Lamp included BZ Bronze

BL Black

DDB Dark bronze


GN Green

GR Gray

SND Sand

STG Steel gray


WH White

CF Custom finish

4798 4799Accent Light

Intended Use

The 4798 accent lighting

fixture offers simple and

compact illumination. Ideal

for spreading soft, even light

along planters, walls and

signs. These units are available

in incandescent, fluorescent

and HID to 50W max.

The Hydrel 4799 fluorescent

lighting fixture offers high-

output with simple lines

and a long, low silhouette.

These are ideal for spreading

soft, even illumination along

planters, walls, and signs that

require a low pattern of light.

Front re-lamping via four

stainless steel fasteners.

Construction

Material: Extruded aluminum

with die-cast aluminum end

caps. Knuckles are cast bronze.


Optics

Distribution: Flood – Flat

polished stainless steel

reflector.

Lens: (4798): Tempered

Borosilicate Glass. (4799):

Clear acrylic.

Electrical

4798: Incandescent – T10,

60W max; Fluorescent – 42TRT

max; HID – E17, 50W max.

4799: T8, 44W max, per lamp.

Ballast: Integral mounted

ballast for low temperature

operation.

Installation

Mounting: 4798: Single 1/2"

NPT adjustable cast bronze

knuckle. 4799: Two (2)1/2"

NPT adjustable knuckles.

Listings

U.L., CSA

Example: 4798 32TRT MVOLT HGS LPI BZ


5(12.8)

4-1/4(10.8)

49-3/4(126.4)

39-1/4(99.7)


4799

5(12.8)

4-1/4(10.8)

12-1/2(31.8)

4798 HID

5(12.8)

4-1/4(10.8)

10-1/2(26.7)

4798 Standard

Notes1 60I and 35S are only available in 120V.

2 MVOLT (120V-277V) only available with fluorescent lamps.

3 MVOLT is not available with 44T8HO.

Linear Floodighting


PRODUCT INFORMATION

HYD

REL


MO

UN

TING

ACCESSOR

IES

Notes1 Two of the selected mounting boxes will be provided.

2 PS available in 12V only.

3 Knuckle mount fixtures only.

4 Specify up to four junction boxes per strap.

5 Will accept two fixtures per mounting. To order with the fixture put 2/ in the lamp type category; for example: 4511 2/M35 12 SP WBC 4O DNA. Visit www.hydrel.com for detailed information on any of the mounting options.

6 For 120V portable applications only.

7 Multiple lengths available consult specification sheets.

= option available

Reminder: Transformer or HID ballast not included (excluding 4620 M50, 4750).

Please remember to order a ballast or transformer box.

FLOOD AND LANDSCAPE LIGHTING MOUNTING ACCESSORIES

NOMENCLATURE DESCRIPTION 2100 47501 4798 4799 4511 4516 4519 4521 4524 4525 4529 4610 4620 4630 4640 4650 4709

NO

BALLAST

ARJB Architectural junction box

FJB Flush mounted junction box

JBA/JBB Junction box aluminum/bronze

MS/MSB Mounting spike steel/bronze (12” or 18” – 12V only)

PS/PSS Polymer ground spike open/sealed (18”, 24” 36”)2

PSSA Pedestal stanchion mount

SBA/SBB Stake box aluminum/bronze (12” or 18”)3 6 6

SMSA Stanchion mount 7

TRA/TRB Tree mounted T-box aluminum/bronze

TRAS/TRBS Tree strap4

WBC35R/WBC4O Wall box cover3, 5 5 5

WMC Wall mount cover3

WMSA Wall mount with integral splice box

WMSA EA Wall mount with extended arms 7

WMP Wall mount plate

WMP EA Wall mount plate for extended arm 7

WMP EAS Wall mount plate with extended arm strut 7

BALLAST

AGB Above-ground ballast (175W max. – remote)

BPCA/BPCB Big polymer combo box (175W max.)

BPTA Big polymer transfomer box (300W max. low voltage)

BSB Big surface box (175W max.)5

BSB EA Big surface box with extended arms (175W max.) 7

BSBTS Big surface box with tree strap (175W max.)5

CBA/CBB Combo box (175W max.)

EBA/EBB Encapsulated ballast box (100W max.)

RACB Round aluminum combo box (100W max.) 5 5 5 5

SCA/SCB Small transformer box, aluminum or bronze (75W max.)

SPCA Small polymer combo box (70W max.)

SSB Small surface box (70W max.) 5 5 5 5

SSB EA Small surface box with extended arms (70W max.) 7

SSBTS Small surface box with tree strap (70W max.) 5 5 5 5

TRMT Tree mount transformer

FLOOD & LANDSCAPELIGHTING

Mounting Accessories

Flood & Landscape Lighting MountingPRODUCT INFORMATION

HYD

REL


Ground & Wall Mounting

NotesFor WMP, SSBTS, BSBTS and RACB, visit www.hydrel.com.

12-1/4(31.1)

12-1/4(31.1)

12-1/4(31.1)

24(61.0)

6(15.2)

2-1/4(5.7)

6(15.2)

2-1/4(5.7)

36(91.4)

6(15.2)

2-1/4(5.7)

12(30.5)

8-7/8(22.5)

8-7/8(22.5)

8-7/8(22.5)

24(61.0)

12(30.5)

36(91.4)

6(15.2)

2-1/4(5.7)

6(15.2)

2-1/4(5.7)

6(15.2)

2-1/4(5.7)

24(61.0)

12(30.5)

6(15.2)

6(15.2)

6(15.2)

36(91.4)

2-1/4(5.7)

2-1/4(5.7)

2-1/4(5.7)

12-1/4(31.1)

12-1/4(31.1)

12-1/4(31.1)

36(91.4)

24(61.0)

12(30.5)

6(15.2)

9(22.9)

6(15.2)

9(22.9)

6(15.2)

9(22.9)

(22.9)

24(61.0)

12(30.5)

36(91.4)

6(15.2)

6(15.2)

6(15.2)

9(22.9)

9(22.9)

9(22.9)

12-1/4(31.1)

12-1/4(31.1)

12-1/4(31.1)

24(61.0)

12(30.5)

36(91.4)

24(61.0)

12(30.5)

6(15.2)

6(15.2)

6(15.2)

36(91.4)

4-1/8(10.5) 4-5/8

(11.7)2-7/8(7.3)

4-1/4(10.8)

1/2(1.3) 6

(15.2)

1(2.5)

8-1/8(20.6)

6(15.3)

4-1/4(10.8)

6(15.3)

4 (10.2)

4 (10.2)

9-1/2 (24.1)

5-1/8 (13.0)

4-1/2 (11.4)

8-7/8(22.4)

5-7/8(14.9)

4-1/8(10.5)

2-3/8(6.0)

12-1/4(31.1)

12-1/2(31.8)

4-1/8 (10.5)

2-3/8(6.0)

WBC40BSB

8-7/8(22.5)

8-7/8(22.5)

8-7/8(22.5)

24(61.0)

12(30.5)

36(91.4)

8-7/8(22.5)

8-7/8(22.5)

8-7/8(22.5)

36(91.4)

24(61.0)

12(30.5)

6(15.2)

9(22.9)

9(22.9)

6(15.2)

6(15.2)

9(22.9)

(22.9)

EA on BSB (HID 100 – 150W)

EA on SSB (LV, HID 35 – 70W)

EA on WMSA (Incandescent) EA45 on WMSA (Incandescent) EA90 on WMSA (Incandescent)

EA90 on SSB (LV, HID 35 – 70W)EA45 on SSB (LV, HID 35 – 70W)

EA45 on BSB (HID 100 – 150 W) EA90 on BSB (HID 100 – 150 W)

SSB WMC WMSA WBC35R AGB TRMT T1903

GROUND & WALLMounting Accessories

MO

UN

TIN

G A

CCES

SOR

IES PRODUCT INFORMATION

HYD

REL


MO

UN

TING

ACCESSOR

IES

3(7.6)

3(7.6)

3-3/4(9.5)

6(15.2)

3-1/4(8.3)

4-1/4(10.8)

4-3/4(12.1)

4-1/8(10.5)

2-3/4(7.0)

4-1/8(10.5)

4-1/4(10.8)

6(15.2)

6(15.2)

18(45.7)

6(15.2)

6(15.2)

7(17.8)

18-1/4(46.4)

2-1/2(6.4)

20-1/4(51.4)

2-1/2(6.4)

PMT Pole Mount Tee

SMT Stanchion Mount Tee

PAR4 Pole Arm RoundPAS4 Pole Arm Square

PATR4 Pole Arm Twin RoundPATS4 Pole Arm Twin Square

6-1/2(16.5)

12(30.5)

7-3/8(18.7)

7-3/4(19.7)3-1/4

(8.3)

7(17.8) 3-7/8

(9.8)

8-1/4(30.0)

5-3/4(14.6)

8(20.5)

5(12.7)

9-1/4(23.5)8-1/8

(20.6)

7-3/8(18.7)

8-7/8(22.5)

9-1/2(24.1)

5(12.7)

12(30.5)

7-1/8(18.1)

4-1/4(10.8)

10(25.4)

10-1/2(26.7)

9(22.9)

6-1/2(16.5)

6(15.2)

18(45.7)

3-3/4(9.5)

5(12.7)

3-1/4(8.3)

7(17.8)

6(15.2)

2-1/4(5.7)

6-1/2(16.5)

3-1/2(8.9)

24(61.0)

6(15.2)

18(45.7)

24(61.0)

3-1/2(8.9)

6-1/2(16.5)

12(30.5)

18(45.7)

24(60.8)

6(15.2)

3-5/8(9.2)

3-1/2(8.9)

5-1/2(14.0)

12(30.5)

18(45.7)

24(60.8)

6(15.2)

3-5/8(9.2)

3-1/2(8.9)

5-1/2(14.0)

Ground, Wall & Pole Mounting

12(30.5)

7/8(2.2)

18(45.7)

7/8(2.2)

12(30.5)

3(7.6)

18(45.7)

3(7.6)

TRATRB

TRASTRBS

ARJB FJB JBAJBB

SMSA PSSA MS18MSB18

MS12MSB12

PSPSS SBA18

SBB18SBA12SBB12

BPTA SPCASPCB

BPCABPCB

CBACBB

SCASCB

EBBEBA

EWM Extended Wall Mount PMSA Pole Mount TRJB Tree Mount

GROUND, WALL & POLEMounting Accessories

PRODUCT INFORMATION

HYD

REL


LAN

DSC

AP

E LI

GH

TIN

G

PRODUCT INFORMATION

4511

Series Lamp type Voltage Distribution3 Mounting accessories Lamped Finish

4511 Low voltage

M35

121

1202

2772

NR No reflector

SP Spot

NFL Narrow flood

See page 675. LPI Lamp included BL Black

BZ Bronze

DDB Dark bronze


GN Green

GR Gray

SND Sand

STG Steel gray


WH White

CF Custom

Intended Use

Low-profile accent light

for shrubs, planters or wall

mountings.

Construction

Material: Housing is

machined aluminum alloy.

Knuckle is cast bronze.

Optics

Lens: Tempered flat glass.

Electrical

Lamp: Low-voltage – MR11,

35W max.

Installation

Mounting: 1/2" NPT adjust-

able knuckle.

Listings

U.L., CSA, IP66, suitable for

wet locations.

Requires low-voltage supply.

Example: 4511 M35 12 SP WMC LPI DNA



2 Only valid when transformer box is ordered.

3 Distribution only required with LPI option. All others choose NR.


2 Only valid if transformer box is ordered.

3 Distribution only required with LPI option. All others choose NR.

PRODUCT INFORMATION Accent Lighting

4516

Series Lamp type Voltage Distribution3 Mounting accessories Lamped Finish

4516 Low-voltage

M50

121

1202

2772

NR No reflector

SP Spot

NSP Narrow spot

FL Flood

NFL Narrow flood

WFL Wide flood

See page 675. LPI Lamp included BL Black

BZ Bronze

DDB Dark bronze


GN Green

GR Gray

SND Sand

STG Steel gray


WH White

CF Custom

Intended Use

Low-profile accent light

for shrubs, planters or wall

mountings.

Construction

Material: Housing is die-cast,

copper-free aluminum alloy

A360. Knuckle is cast bronze.

Optics

Lens: Tempered flat glass.

Electrical

Lamp: Low-voltage – MR16

quartz halogen, 50W max.

Installation


able knuckle.

Listings

U.L., CSA, IP66, suitable for

wet locations.

Requires low-voltage supply.

Example: 4516 M50 12 SP WMSA LPI DNA


5-3/8(13.7)

3-1/2(8.9)2-5/8

(6.7)

2(5.1)

3-1/4(8.3)

2-3/4(7.0)

5-1/8(13.0)



Accent Lighting



PRODUCT INFORMATION

HYD

REL


LAN

DSCA

PE LIG

HTIN

G

4521

Series Lamp type Voltage Distribution4 Lens Mounting accessories Options Lamped Finish

4519 Incandescent1

P38100I

P38120I

P38250I


P2035CM

P3870CM

P38100CM

Metal halide2

P3870M

P38100M

P38150M

120

208

240

277

347

120/277

MVOLT3

TB

NR No reflector

SP Spot

FL Flood

WFL Wide flood


CLA Convex lens amber

CLB Convex lens blue

CLG Convex lens green

CLR Convex lens red


GS Glare shield

Fusing

SF Single fuse6

DF Double fuse7

Ballast


LPI Lamp included

BL Black

BZ Bronze

DDB Dark bronze


GN Green

GR Gray

SND Sand

STG Steel gray


WH White

CF Custom

PRODUCT INFORMATION

4519Intended Use

Spotlights architectural or land-

scape features from the ground,

wall mountings or trees.

Construction

Material: Cast aluminum with

cast bronze knuckle.


Optics

Lens: Incandescent: No lens.

Lamp face forms lens on incan-

descent. HID – convex, clear

tempered glass. Amber, blue,

green or red lenses available.

Electrical

Lamp: Incandescent – PAR38

250W max. Metal halide –

PAR38 150W max.

HID requires separate ballast

box.

Installation

Mounting: 1/2" NPT

adjustable knuckle.

Listings

U.L., CSA, suitable for wet

locations.

Example: 4519 P38250I 120 SP JBA LPI DDB

Example: 4521 100M 120 SP CLC BPCA GS SF LPI BZ


Series Lamp type Voltage Distribution3 LensMountingaccessories Options Lamped Finish7

4521 Incandescent1

P38100I

P38150I

Metal halide2

P3035CM

P3070CM

P3870M

P3870CM

P38100M

P38100CM

P38150M

70M

70CM

100M

100CM

150M


70S

100S

150S

1201

208

240

277

347

120/277

MVOLT8

SP Spot

FL Flood





CLR Convex lens red



GS Glare shield

Fusing

SF Single fuse5

DF Double fuse6

Ballast


LPI Lamp included

BZ Bronze

BL Black

DDB Dark bronze


GN Green

GR Gray

SND Sand

STG Steel gray


WH White

CF Custom finish


Intended Use

The graceful style of this

adjustable up-light is used

extensively for spot or

floodlighting shrubs, trees

and building facades.

Construction

Strongly constructed of cop-

per and bronze with durable

silicone sealing gaskets, the

fixture is completely

weatherproof. The shield

provides maximum beam

control with minimum side

glare. The metal weathers

naturally to a patina of soft

copper tones. Provided with

clear tempered lens.

Material: Heavy-gauge spun

copper body with cast bronze

knuckle and sealing rings.

Finish: Bright dipped natural

copper standard. Painted

finish also available. See

ordering guide for options.


Optics

Distribution: E17 lamps –

Spot and flood. PAR lamps –

Beam spread by lamp type.

Lens: Convex, tempered glass.

Electrical

Lamp: Incandescent – PAR38,

150W max. HID – PAR38,

150W max. E17, 150W max.

Socket: Pulse rated medium

base.

Installation

Mouting: 3/4" NPT adjust-

able knuckle. Separate

ballast enclosure required

for HID models.

Listings

U.L.

9-1/4(23.5)

6-3/8(16.6)

2-1/2(7.6)

Notes1 Available with 120V only.

2 Separate ballast enclosure required for HID models.

3 MVOLT is standard on metal halide lamps with GEB ballast option.

4 Not all distributions available with all lamp types; use NR when not using LPI option.

5 CLC will be used if no lens is chosen on HID.

6 SF is available with 120V or 277V on HID only.


Notes1 Available with 120V only.


3 E17 lamps valid with flood (FL) distribution only.

4 CLC is the default lens.


6 DF is only available with 208V, 220V, 240V on HID only.

7 Paint finish is optional; standard fixture is natural copper.

8 MVOLT is standard on metal halide lamps with GEB ballast option.




17(43.2)12

(30.5) 7-3/8(18.7)

Accent Lighting



PRODUCT INFORMATION

HYD

REL


LAN

DSC

AP

E LI

GH

TIN

G

PRODUCT INFORMATION

4524Intended Use

Accents trees, shrubs, signs

and walls from the ground,


Construction

Material: Cast aluminum or

bronze.

Finish: Aluminum models –

See ordering guide for color

options. Bronze models –

Natural bronze.


The optional glare shield

eliminates source glare while

still allowing for maximum

light output. Heat-resistant,

tempered lens and silicone

gasket provide weathertight

protection.

Optics

Lens: Clear convex tempered

glass. Amber, blue, green and

red lenses also are available.

Electrical

Lamp: Low-voltage – MR16,

75W max. Incandescent –

PAR16 or PAR20, 60W max.

HID – Metal halide PAR20,

35W max.

Installation


able knuckle. HID requires

separate ballast box.

Listings

UL, CSA, suitable for wet

locations.

Example: 4524 A P2035CM 277 SP CLC SPCA LP BL


Series Material Lamp type Voltage DistributionMountingAccessories Options Lamped Finish7

4525

A Aluminum

B Bronze

Incandescent1

P38100I

P38150I

P38250I

Metal halide2

70M

70CM

100M

100CM

150M

175M

P3870M

P3870CM

P38100M

P38100CM

P38150M


70S

100S

150S

120

208

220

240

277

347

TB

SP Spot

FL Flood

See page 675.




GS Glare shield


Fusing

SF Single fuse5

DF Double fuse6

LPI Lamp Included

BZ Bronze

BL Black

DDB Dark bronze


GN Green

GR Gray

SND Sand

STG Steel gray


WH White

CF Custom finish


4525Intended Use

Accents trees, shrubs, signs

and walls from the ground,


Construction


bronze.

Finish: Aluminum models –

See ordering guide for color

options. Bronze models –

Natural bronze.


The optional glare shield

eliminates source glare while

still allowing for maximum

light output. Heat-resistant,

tempered lens and silicone

gasket provide weathertight

protection.

Optics

Distribution: HID – Spot or

fused, PAR lamp determined

by lamp type.

Lens: Convex tempered glass,

clear.

Electrical

Lamp: Incandescent – PAR38,

250W max. HID – PAR38 or

ED17, 175W max.

Socket: Pulse rated medium

base or E27 (European)

standard.

Installation


able knuckle. Separate ballast

box required for HID models.

Listings

UL, CE, CB, NEMKO, CSA.

Example: 4525 A 100CM 277 FL BSB GS SF LPI BZ

5-5/8(14.0)

3-7/8(9.8)

6(15.2) Notes

1 Separate ballast enclosure required for HID models, transformers for low-voltage lamps.


3 Only available with HID lamps.

4 Not all distributions available with all lamp types; use NR when not using LPI option.

5 CLC will be used if no lens is chosen on HID.



8(20.3)

12-1/2(31.8)

8-1/2(21.6)

7(17.8)




4 STB available on PSS_, BPCA and SPCA only.

5 SF is only available wth 120V,277V or 347V on HID only.


7 Finish is only available on fixtures with aluminum material.




Accent Lighting

Series Material Lamp type Voltage Distribution4 Lens5Mounting accessories Options Lamped Finish

4524 A Aluminum

B Bronze

Low-voltage1

M35

M50

M75


P2035CM

Incandescent

P1640I

P1655I

P1660I

P2050I

P2060I

122

120

2083

2403

277

347

120/2773

MVOLT3

TB3

NR No reflector

SP Spot

NSP Narrow spot

FL Flood

NFL Narrow flood

WFL Wide flood





CLR Convex lens red

See page 675.



External acessories

GS Glare shield

Fusing

SF Single fuse6

DF Double fuse7

LP Lamp installed

BL Black SND Sand

BZ Bronze STG Steel gray

DDB Dark bronze TVG Terra verde green


WH White

GN Green CF Custom

GR Gray



PRODUCT INFORMATION

HYD

REL


Accent Lighting

Series Lamp type Voltage Distribution5 MountingMounting accessories Options Cord set length Lamped Finish

46101

46202

Low-voltage

M202

M352

M502

M751


P2035CM

35CMT44

121

120

208

240

277

347

120/277

MVOLT

TB

NR No reflector

SP Spot

NSP Narrow spot

FL Flood

NFL Narrow flood

WFL Wide flood

YM Yoke mount

KM Knuckle mount

See page 675.









GS Glare shield

Fusing

SF Single fuse6

DF Double fuse7

Ballast


CSL 10'-50' of cord (available in 5' increments)9

LPI Lamp included

BL Black

BZ Bronze

DDB Dark bronze


GN Green

GR Gray

SND Sand

STG Steel gray


WH White

CF Custom

Series Material Lamp type Voltage Distribution1 Mounting accessories Lamped Finish2

4529 A Aluminum

B Bronze

Incandescent

P38100I

P38150I

120 NR No reflector

SP Spot

FL Flood

WFL Wide flood

See page 675. LP Lamp installed BL Black

BZ Bronze

DDB Dark bronze


GN Green

GR Gray

SND Sand

STG Steel gray


WH White

CF Custom

PRODUCT INFORMATION

4529Intended Use

Uplighting of trees, signs,

walls and building facades.

Construction


cast bronze body and glare

shield. Knuckle is cast bronze.


Optics

Lens: None.

Electrical

Lamp: Incandescent – PAR38

medium-base.

Installation


able knuckle.

Listings

U.L., suitable for wet locations.

Example: 4529 B P38150I 120 SP JBB LP


Notes1 Not all distributions available with all lamp types; use NR when not

choosing LPI option.

2 Finish required on aluminum products.

Notes1 Transformer, sold sperately.

2 Transfomer included on 4620 unless 12V is specified.

3 Separate ballast enclosure required; available on 4620 only.

4 Requires GEB ballast.

5 Not all distributions available with all lamp types; use NR when not choosing LPI option.




9 Only valid with yoke mount.

10 Not available with 35CMT4 lamps.


4610 4620

Intended Use

Tree-mounted or ground-

mounted uplighting, or

building-mounted facade

lighting.

Construction

Material: Fixture, knuckle,

yoke are copper-free alu-

minum A360. All aluminum

materials are chem filmed or

anodized prior to painting.


Optics

Lens: Crowned tempered

glass.

Electrical

Lamp: MR16, 75W max.

Ceramic metal halide,

35W max.

Installation

Mounting: Knuckle 1/2" NPT

adjustable. Yoke mount with

a minimum of 10' of 18/3

STW cord. Cord length must

be specified.

Listings


wet locations.

Example: 4610 M50 277 FL KM SSB IHL FGS LPI SND

9(22.9)

2-5/8(6.7) 3-3/4

(9.5)

6(15.2)




5-1/8(13.1) 3

(7.6)

4-1/4(10.8)

4-1/4(10.8)

3(7.6)

5-1/8(13.0)

4610 YM 4610 KM 4620 YM 4620 KM

3(7.6)

4-1/4(10.8)

7-1/8(18.0)3

(7.6)7-1/8(18.0)

5-1/4(13.3)

Visit www.hydrel.com for monochromatic LED specifications.



LAN

DSCA

PE LIG

HTIN

GPRODUCT INFORMATION

HYD

REL


LAN

DSC

AP

E LI

GH

TIN

G

Series Lamp type Voltage Distribution MountingMounting accessories Options

4630

4640

Incandescent1

P38100I8

P3075I9

P38150I8

Quartz1, 8

150Q


P3035CM9

P3070CM9

35CMT68

70CMT68

150CMT68

Metal halide2, 8

70M

P3870M

P38100M

100M

150M

P38150M

High pressure sodium2, 8

70S

100S

120

208

240

277

347

120/277

MVOLT6

TB

NR No reflector3

SP Spot

MFL Medium flood8

FL Flood

YM Yoke mount

KM Knuckle mount








Options (continued) Cord set length7 Lamped Finish



GS Glare shield

Fusing

SF Single fuse4

DF Double fuse5

Ballast

GEB6 Electronic ballast

CSL_ 10'-50' of cord (available in 5' increments)


BZ Bronze

DDB Dark bronze


GN Green

GR Gray

SND Sand

STG Steel gray


WH White

CF Custom

4630 4640

Intended Use

Landscape and architectural

applications.

Construction

Material: Fixture, knuckle,

yoke – die-cast, copper-free

aluminum alloy A360. All

materials are chem-filmed or

anodized prior to painting.


Optics

Lens: Crowned tempered glass.

Electrical

Lamp: Incandescent – 150W

max. HID– Metal halide

150W max.

Installation

Mounting: Knuckle: – 1/2:"

NPT adjustable. Yoke –

minimum of 10 ft 18/3 STW

cord. Cord length must be

specified.

Listings

U.L., C.U.L., C.E., IP66, suit-

able for wet locations.

Example: 4630 P3070CM 120 SP KM SSB IHL LPI BL


8-1/8(20.6) 5-1/4

(13.3)

4-1/4(10.8)


4630 Knuckle Mount4640 Knuckle Mount

8-1/8(20.6) 5-1/4

(13.3)

5-1/4(13.3)

4630 Yoke Mount

4640 Yoke Mount

Notes1 Available in 120V only.

2 Separate ballast enclosure required.

3 Only valid if LPI is not chosen.



6 MVOLT default if GEB selected; only valid with metal halide lamps.


8 Available with 4640 only.


9-3/8(23.8) 6-1/2

(16.5)

4-3/4(12.1)

9-3/8(23.8) 6-1/2

(16.5)

6-1/4(15.9)

Accent Lighting

Visit www.hydrel.com for monochromtic LED specifications.


PRODUCT INFORMATION

HYD

REL


LAN

DSCA

PE LIG

HTIN

G

Series Lamp type Voltage Distribution4 Mounting Mounting accessories Options

4650 Incandescent1

P38100I

250Q

P56300I


70CMT6

P38100CM

150CMT6

Metal halide2

70M

100M

150M

P38100M

P38150M

120

208

240

277

347

120/277

480

MVOLT3

TB

NR No reflector

TSP Tight spot

SP Spot

NSP Narrow spot

MFL Medium flood

FL Flood

NFL Narrow flood

WFL Wide flood

YM Yoke mount

KM Knuckle mount









GS Glare shield

Fusing

SF Single fuse5

DF Double fuse6

Ballast


Cord set length8 Lamped Finish

CSL_ 10'-50' of cord (available in 5' increments) LPI Lamp included BL Black

BZ Bronze

DDB Dark bronze


GN Green

GR Gray

SND Sand

STG Steel gray


WH White

CF Custom

4650Intended Use

These large, versatile accent

lights provide illumination

for a variety of architectural

and landscape applications

to 60'.

Construction


free aluminum alloy A360.

All aluminum materials are

chem-filmed or anodized

prior to painting.

Finish: See ordering guide for

color options.


Optics

Lens: Crowned tempered glass.

Electrical


250W max.; PAR 56 – 300W

max. HID – E17, T6 or PAR38,

150W max.

Socket: Incandescent – Mini-

can (T4) or mogul end prong

(PAR 56). HID – Medium-base

or G12 base.

Voltage: See ordering guide.

Installation

Mounting: Knuckle – 1/2"

NPT. Yoke – With a minimum

of 10' 18/3 STW cord. Cord

length must be specified.

Listings

U.L., C.U.L., C.E., IP66, suit-

able for wet locations.

Example: 4650 150M TB SP KM BSB FGS IHL LP DDB


11-5/8(29.5) 8-1/2

(21.6)

4-3/4(12.1)


Knuckle Mount Yoke Mount

Notes1 120V only.

2 Separate ballast enclosure required.

3 Standard on metal halide lamps with GEB ballasts.

4 Not all distributions available with all lamp types; use NR when not choosing LPI on PAR lamps.



7 GEB default if MVOLT selected; only valid with metal halide lamps.


11-5/8(29.5) 8-1/2

(21.6)

6-1/4(15.9)

Accent Lighting


PRODUCT INFORMATION

HYD

REL


LAN

DSC

AP

E LI

GH

TIN

G

Series Lamp type Voltage Distribution LensMounting accessories Options Lamped Finish

4709 Incandescent1

P38100I

P38150I

Metal halide2

P3870CM

P38100CM

P3870M

P38100M

P38150M

120

208

240

277

347

120/277

MVOLT3

TB

NR No reflector

SP Spot

FL Flood





CLR Convex lens red

See page 675.




GS Glare shield

Fusing

SF Single fuse5

DF Double fuse6

Ballast


LP Lamp installed

BL Black

BZ Bronze

DDB Dark bronze


GN Green

GR Gray

SND Sand

STG Steel gray


WH White

CF Custom

4709Intended Use

Designed for installation

where cost and reliability are

paramount.

Construction

Material: Die-cast aluminum.


Optics

Lens: Convex tempered

glass (HID); lens optional on

incandescent models.

Electrical

Lamp: Incandesent – PAR38,

250W max. HID – PAR38,

150W max.

Socket: Pulse-rated

medium-base.

Installation

Mounting: 1/2" NPT

adjustable knuckle.

Listings

U.L., C.U.L., suitable

for wet locations.

Example: 4709 P3870M 120 SP CLC SPCA LP BL


5(12.7)

5-3/8(13.7)

9(22.9)


Notes1 Incandescent models valid with 120V only.


3 Standard on metal halide lamps with GEB ballast.

4 CLC lens provided on all HID models, optional on incandescent.

5 SF available with 120V, 277V or 347V on HID only.

6 DF available with 208V, 220V or 240V on HID only.


Accent Lighting


PRODUCT INFORMATION

HYD

REL


LAN

DSCA

PE LIG

HTIN

G

Series Lamp type Voltage Distribution Mounting accessories1 Options Lamped Finish

4720 Metal halide

70CMTD RSC

150CMTD RSC

70CMT6 G12

150CMT6 G12


70SDW PG12

100SDW PG12

120

208

220

240

277

347

TB

SP Spot

MFL Medium flood

FJB Flush J-box

PSSA Ped. stanchion mount 7" splice access

SMSA_ 12" - 48" stanchion mount, available in 6" increments

WMSA Wall mount splice access





Fusing

SF Single fuse2

DF Double fuse3

Door clips

TDC Tool-less door clips

LPI Lamp included

BZ Bronze

BL Black

DDB Dark bronze


GN Green

GR Gray

SND Sand

STG Steel gray


WH White

CF Custom finish

Intended Use

Designed for installations

where function, appearance

and durability are essential

considerations.

Construction

The 4720 Series architectural

accent light meets the most

demanding requirements.

Integral ballast with heavy

cast aluminum construc-

tion adds up to a fixture of

exceptional quality. The

unit is weather-tight with

a heat-resistant, tempered

convex lens. Supplied as a

knuckle-mounted unit.

Material: Heavy wall cast

aluminum body and knuckle.


External door fasteners are

Teflon® coated stainless steel.

Optics

Distribution: Spot (SP) or

medium flood (MFL).

Lens: Clear convex tempered

glass.

Accessories: External glare

control.

Electrical

Lamp: MH: (T-6), 150W max.

HPS: T10, 100W max.

Socket: MH – T6, G12 bi-pin

or RSC double-ended 150W

max. HPS – T10, PG12 bi-pin.

Ballast: High power factor

magnetic ballast standard. Bal-

last included in fixture head.

Installation

Mounting: 3/4" NPT male

adjustable knuckle with

self-releasing taper allows

infinite vertical adjustment

through 180°.

Listings

U.L.

Example: 4720 150CMTD 120 SP PSSA IHL SF LPI BZ

10-1/2(26.7)

9-7/8(25.1)

10-7/8(27.6)

4(10.2)


Notes1 See individual mounting specification sheets for conduit/drilling options.



4720

Accent Lighting



PRODUCT INFORMATION

HYD

REL


STEP

& B

OR

DER

Series Material Lamp type Voltage Options Lamped Finish

4451

4452

4453

A Aluminum

B Bronze

Incandescent

40I1

Fluorescent

7TT

9TT

13DTT

2/7TT2

2/9TT2

2/13DTT2

120

277

347


LLV Louver door


BZ Bronze

DDB Dark bronze


GN Green

GR Gray

SND Sand

STG Steel gray


WH White

CF Custom

4451 4452 4453

Intended Use

For use in outdoor wet

locations, such as patios

and pathways at hospitals,

hotels, schools, airports and

parking garages.

Construction


cast bronze. Aluminum body

black permabarred.

Fastners: Stainless steel.

Accessories: Louver door, 45°

cut-off.

Optics

Lens: Diffused, tempered

glass for non-louvered door.

Clear, tempered glass for

louvered door.

Electrical


max, A19 lamp. Fluorescent

– single or double 13W max.

CFL twin tube or double

twin tube.

Socket: Incandescent – Me-

dium screw base. Fluorescent

– 2G7 or GX24Q-1 base.

Ballast: Fluorescent – Elec-

tronic ballast high frequency

with 0°F (-18°C) minimum

starting temperature.

Conduit entry: 3/4" NPT side

entries standard.

Listings


locations.

Example: 4451 A 13DTT 120 LPI SND


5-3/8(13.6)

3(11.6)

4-5/8(11.3)

10-1/2(26.7)


4451

5-1/4(13.3)

4(10.2)

4-1/2(11.3)

10-1/4(26.0)

4452

3-3/4(9.5)

3-7/8(9.8)

10-1/4(26.0)

2-1/4(5.7)

4453


2 Only available with 4452.

Step Lights


4451

4452

4453

PRODUCT INFORMATION

HYD

REL


STEP &

BO

RD

ER

Series Material1 Lamp type Voltage Options Lamped Finish

4454

4456

A Aluminum

B Bronze

Incandescent

75I2, 3

Fluorescent3

18TRT

26TRT

32TRT

42TRT

Metal halide

50M


35S

50S

120

277

347

MVOLT5

Fusing

ELN Emergency battery backup3, 4

SF Single fuse5


LLV Louver door


BZ Bronze

DDB Dark bronze


GN Green

GR Gray

SND Sand

STG Steel gray


WH White

CF Custom

4454 4456

Intended Use

For use in outdoor wet

locations such as patios

and pathways at hospitals,

hotels, schools, airports and

parking garages.

Construction

Material: 4454 – Cast

aluminum or cast bronze.

Aluminum body black

permabarred. 4456 –

Cast aluminum.

Fastener: Stainless steel.

Optics

Lens: Diff used, tempered

glass for non-louvered door.

Clear, tempered glass for

louvered door.

Electrical

Lamp: HID – 50W max,

E17 lamp.

Socket: Medium screw base,

pulse-rated.

Ballast: HID – Magnetic ballast

high power factor with -20°F

(-29°C) minimum starting

temperature. Fluorescent –

Electronic ballast high frequen-

cy with 0° F (-18°C) minimum

starting temperature.

Conduit entry: 3/4" NPT side

entries standard.

Listings


locations.

Example: 4456 42TRT 120 ELN LPI DDB


5-1/4(13.3)

10-1/4(26.0)

4(10.2)

8-5/8(21.9)


4454

6(15.2)

5-1/8(14.0)

6-1/2(16.5)

13(33.0)

4456

Notes1 Not available with 4456.

2 Available in 120V only.

3 Not available with 4454.

4 Only available with fl uorescent lamps.

5 Only available with metal halide lamps.

Step Lights


4454

4456

PRODUCT INFORMATION

HYD

REL


STEP

& B

OR

DER

Series Lamp type Voltage Distribution Options Cord set length Lamped

4462 Incandescent

90I

Quartz

75Q

Low-voltage

2/M35

121

120

NR No reflector2

SP Spot2

NSP Narrow spot2

FL Flood

NFL Narrow flood2

WFL Wide flood2


LLV Louver door

RG Rock guard

CSL_ 35'-120' of cord4 LPI Lamp included

4462Intended Use

Meets installation require-

ments for wood and all

(insulation) type IC applica-

tions. Fixtures are completely

weatherproof with neoprene

gasket and tempered lens.

Construction

Fixture housing and door:

Heavy wall cast bronze

construction. Natural

bronze finish.

Gasket: Single piece, molded

U-shaped silicone.

Cord: Minimum of 35' of

#16-3ST submersible rated

cord. Cord entrance is brass

water-tight seal and epoxy

encapsulated. Cord length

must be specified.


Optics

Lens: Tempered borosilicate

diffuse glass standard. Clear

tempered borosilicate glass.

Electrical

Lamp: Incandescent – A19

90W max., 120V. Quartz

halogen – T4 75W max.,

120V. Low-voltage – two

MR16, 35W max. each.

Socket: Incandescent – Me-

dium base. Quartz halogen

– Mini-can screw base. Low-

voltage – Gx5.3 bi-pin.

Installation

Niche: Stainless steel with

cast bronze mounting frame

which has provisions for

locking fixture into position.

Single conduit entrance is

3/4" NPT with 3/4" x 1/2" NPT

reducer bushing.

System Features

Factory leak tested: Fixtures

are tested at 10 PSI (0.70kg/

cm2) internal pressure while

totally submerged in water.

Listings

U.L., C.U.L., IP67.

Example: 4462 2/M35 12 FL RG CSL50 LPI


5-3/8(13.7)

6-7/8(17.5)

11(27.9)


Notes1 Transformer sold separately. Only available with 2/M35.

2 Only available with 2/M35.


4 CSL 50 is maximum length for 12V fixtures.

Step Lights


PRODUCT INFORMATION

HYD

REL


STEP &

BO

RD

ER

Series Lamp type Voltage Conduit entry Options Lamped Finish

M4534 Incandescent1

60I

100Q

Fluorescent

18TRT

26TRT

32TRT

Metal halide

50M

70M

100M


35CMT6

70CM

70CMT6

100CM


35S1

50S1

70S

100S

120

208

240

277

347

MVOLT2

12B 1/2" NPT bottom

12S 1/2" NPT side


34S 3/4" NPT side


MILS90 Internal 90° light shield


Fusing

SF Single fuse3

DF Double fuse4

Ballasts5



LPI Lamp included

BL Black

BZ Bronze

DDB Dark bronze


GN Green

GR Gray

SND Sand

STG Steel gray


WH White

CF Custom

M4534Intended Use

This unique style and

distinctive fixture are ideal

for installation in sidewalks

or promenades – designed to

be recessed in concrete, flush

to lower rim.

Construction

Material: Cast aluminum

housing with integral 24"

junction box (incandes-

cent) or ballast box (HID,

fluorescent).

Gasket: Molded silicone.

Glare control: Black finish

Glarefoil included.

Optics

Lens: Molded, tempered,

borosilicate.

Electrical


max., A15 or T10/tubular.

100Q (quartz) 100W max.,

T4/tubular. HID – 100W

max., E17/elliptical or T6/

G12. Fluorescent – 32TRT,

32W max.

Socket: Quartz – Mini-can

base. Fluorescent – Gx24Q-3

base. HID, incandescent –

pulse-rated medium base.

Conduit entry: Two 3/4" NPT,

1/2" NPT side or bottom

openings available.

Listings

U.L., C.U.L.

Example: M4534 70CMT6 MVOLT 34S MILS180 GEB LPI STG


9-1/2(24.2)

10-1/4(26.0)

5-1/4(13.3)

4-3/8(11.2)

4(10.2)

8-3/8(22.2)


Notes1 Only available in 120V.

2 MVOLT is only available with fluorescent and metal halide lamps with GEB or MLEBAD options.


4 DF available with 208V or 240V and HID only.


6 0-10V dimmer not included.

Border Lights

HID, FluorescentIncandescent


PRODUCT INFORMATION

HYD

REL


STEP

& B

OR

DER


4540 Metal halide

50M

70M


35CMT4

35CMT6

70CM

70CMT4

70CMT6

120

208

240

277

347

MVOLT1

12B 1/2" NPT bottom





Fusing

SF Single fuse2

DF Double fuse3

Ballast4




BZ Bronze

DDB Dark bronze


GN Green

GR Gray

SND Sand

STG Steel gray


WH White

CF Custom

4540Intended Use

This unique and distinctive

fixture has been custom de-

signed for installation along

park walkways and sidewalks.

Construction

Material: The bollard section

is fabricated from heavy cast

aluminum.


molded ABS, U.V. stabilized,


resistant for use in all types

of environments.

Optics

Lens: Molded tempered glass.

90° cutoff with internal louver.

Electrical

Lamp: HID – 100W max.,

E-17/elliptical or 70W T6/G12.

Socket: Pulse-rated

medium base.

Conduit connection: Two


are standard in the cast

aluminum integral junction

box. Suitable for through-

branch wiring, this box has

24" of volume.





Example: 4540 70M 277 34B LP BL


3-1/2(8.9) 12

(30.5)

18(45.7)

12-1/2(31.8)

10(254.0)

Single Tamper-Proof Retaining Screw

8-7/8(22.5)


Notes1 MVOLT is only available with GEB and MLEBAD options.



4 Only available with MVOLT voltage.

5 O-10V dimmer not included.

Border Lights


PRODUCT INFORMATION

HYD

REL


Border Lights STEP &

BO

RD

ER


M9450 Pathway light

M9460 Marker light

Low-voltage1

50QT3

Incandescent2

75Q

Metal halide3

70M

Fluorescent3

18TRT

26TRT

32TRT


35CMT41

35CMT6

70CM3

70CMT41

70CMT6

100CM3

121, 9

120

208

240

277

347

MVOLT4

12B 1/2" NPT bottom

12S 1/2" NPT side

34B 3/4" NPT bottom

34S 3/4" NPT side

1B 1" NPT bottom





XLS External glare shield

2XLS Two external glare shields

Fusing

SF Single fuse5

DF Double fuse6

Ballast7



LP Lamp installed

BL Black

BZ Bronze

DDB Dark bronze


GN Green

GR Gray

SND Sand

STG Steel gray


WH White

CF Custom

M9450 M9460

Intended Use

Pathway and marker lights

are multi-purpose units de-

signed for high-traffic areas

to be mounted in a variety of

substrates. The M9460 Series

also is suitable for drive-over

applications and has been

tested to withstand up to

22,000 lbs.

Construction


molded ABS, U.V. stabilized


resistant for use in all type

of environments.

Material: Top is cast aluminum.

Electrical

Conduit connection: Two


are standard in the cast

aluminum integral junction

box. Suitable for through-

branch wiring, this box has

24' of volume.





Example: M9450 18TRT MVOLT 12B LP SND


3 (7.6)

2-1/4 (5.7)

16(40.6)

13(33.0)


M9460

15-7/8(40.3)

4-1/8(10.5)

9(22.9)

M9450

Notes1 Only available with M9460.

2 Only available in 120V.

3 Only available with M9450.

4 MVOLT is only available with fluorescent and metal halide lamps.



7 Only available with HID lamps and MVOLT voltage.

8 O-10V dimmer not included.

9 Low-voltage only; transformer sold separately.


PRODUCT INFORMATION

HYD

REL


STEP

& B

OR

DER

Series Lamp type Voltage LED color Options Lamped Finish2

4595

4596

4597

4598

20QT3

3CCLED Constant current (3 LED)3

1CCLED Constant current (1 LED)3

121 WMW Warm white

CLW Cool white

JBA J-box, aluminum

JBB J-box, bronze

LPI Lamp included

LP LED installed4

VBL Black

VBZ Bronze

VGN Green

VTVG Terra verde green

VWH White

4595 4596 45974598

Intended Use

The graceful mushroom

garden light is ideal for

lighting flower beds, low

planter areas, walkways and

driveways, or any area where

an unobstructed circular field

of light is desired.

Construction

Material: Heavy-gauge cast

bronze body with spun cop-

per canopy.

Optics

Lens: Glass.

Electrical

Lamp: Quartz T3 20W max.

Socket: G4 bi-pin.

LED: Available with three LED

or one LED boards. Wattage

and lumen output will vary

with number of LEDs on

board, current supplied from

driver and LED color.

LED driver: Sold separately. See

BPTA/BPTP driver enclosure

specification sheet for options.

Example: 4595 20QT3 12 JBA LPI VBL


13-7/8(35.2)

8(20.3)

18-7/8(47.9)


4595 4596

17-5/8(44.8)

13-7/8(35.2)

8(20.3)

4597

17-3/4(45.1)

14(35.6)

14(35.6)

4598

Notes1 Low-voltage transformer sold separately.

2 Vendor-supplied finish. Consult factory for details.

3 Driver sold seperately. Do not specify voltage with LED. See spec sheet for driver options.

4 Only available with LED.

Border Lights

18-7/8(47.3)

14(35.5)

8(20.3)


PRODUCT INFORMATION

HYD

REL


BO

LLAR

DS

Series Height Lamp type Voltage Distribution Options

3110

3120

3130

3140

36

42

Incandescent8

100I

Fluorescent

26DTT

32TRT

42TRT

Metal halide5

50M

70M

100M


35CMT4

70CMT4

35CMT6

70CMT6


50S

70S

100S

Low pressure sodium

18L

35L

120

208

240

277

347

120/277

MVOLT1

TB

SYM Symmetric

FT Forward throw

Fusing2

SF Single fuse

DF Double fuse

Ballast


GFCI Receptacle

ELN Emergency battery backup (fluorescent lamp only), half output7

ELH Emergency battery backup (fluorescent lamp only), full output7

Lamped Finish

LPI Lamp included

LPIC Lamp included (coated)4

Finish

BL Black

BZ Bronze

DDB Dark bronze


GN Green

GR Gray

SND Sand

STG Steel gray


WH White

CF Custom

Optional louvers painted

_ /PL Louvers painted to match fixture

3110 3120 3130 3140

Intended Use

The 3100 Series bollard is a

low-level area lighting lu-

minaire for use in walkways,

plazas or pedestrian areas.

Construction

Material: Copper-free

aluminum A360.


Electrical

Lamp: Fluorescent – 42W

max. triple tube. HID – 70W

max. G12, 100W max. E17/el-

liptical. Low pressure sodium

– T16, BY22d base.


core and coil electronic ballast

with low starting temperature.

Listings


wet locations.

Example: 3130 36 100M MVOLT SYM GEB LPIC DNA


35-1/2(90.2)

or41-1/2(105.4)

34(86.4)

or40

(101.6)

34(86.4)

or40

(101.6)

35(88.9)

or41

(104.1)

8(20.3)

8(20.3)

9(22.9)

3110 3120 3130 3140

9(22.9)

8(20.3)

8(20.3)


Notes1 MVOLT is standard on all fluorescent lamps or metal halide lamps with

GEB electronic ballasts.

2 SF only valid with 120V, 277V or 347V. DF only valid with 208V or 240V, metal halide lamps only.


4 LPIC only valid with 50M, 70M, 100M, 50S, 70S,100S,100I.

5 Will be provided with coated lamps unless LPI is chosen.

6 T4 and T6 lamps will be provided with a frosted lens.

7 Only valid with 42TRT, 32TRT and 26DTT. Must specify 120V or 277 V.

8 Incandescent lamps 120V only.

Bollards


3110 3120 3130 3140

PRODUCT INFORMATION

HYD

REL


BO

LLA

RD

S

Series Height1 Lamp type Voltage Distribution Light wash4

G2LBD

G2LBW

36

42

Metal halide2

70M

100M


70CM

100CM

35CMT6

70CMT6


50S

70S

100S

Fluorescent

26DTT

32TRT

42TRT

120

208

240

277

347

120/277

MVOLT3

TB

SYM Symmetric

FT Forward throw

Bollard front

LWF Light wash front

LEDAF LED color wash, amber front

LEDBF LED color wash, blue front

LEDRF LED color wash, red front

LEDCWF LED color wash, cool white front

LEDWWF LED color wash, warm white front

LEDRYF LED color wash, royal blue front

Light wash4 (continued) Option Lamped11 Finish

Bollard back

LWB Light wash back

LEDAB LED color wash, amber back

LEDBB LED color wash, blue back

LEDRB LED color wash, green back

LEDCWB LED color wash, cool white back

LEDWWB LED color wash, warm white back

LEDRYB LED color wash, royal blue back

Control

DCT Dual circuit5

Fusing

DF Double fuse6

SF Single fuse7

Ballast


MLEBAD Electronic dimming ballast8, 9

ELN Emergency battery backup10

LPI Lamp included

LPIC Lamp included (coated)

Finish






DSPF Rust, textured


CF Custom finish

Optional louvers finishes

_/PL Louvers to match12

G2® LOUVER BOLLARD

Intended Use

The G2® Bollard Series is

designed to work in build-

ing perimeter areas and

public spaces, completing a

wide variety of architec-

tural styles. The G2® bollard

fixture offers an unmatched

impact-resistant mounting

and leveling design, ensuring

life-long performance.

Construction

Material: Copper-free

aluminum A360.



semi-matte.


Optics

Light wash: Choose between

patent-pending LED color

wash or light wash. The LED

color wash option adds vi-

brant color to the bollard and

creates the opportunity for

customized applications. The

optional light wash reflector

illuminates the bollard base

by redirecting light from

main lamp source.

Electrical


max., triple tube. HID – 70W

max. G12; 100W max. E17.


core and coil, electronic ballast

with low starting temperature.

Listings


wet locations.

IES cutoff.

Example: G2LBD 36 100M MVOLT SYM LEDBF LEDCWB DCT GEB LPIC DNAT


Light center height

41(104.1)

or35

(88.9)

8(20.3)

8(20.3)

8(20.3) 4

(10.2)

41-1/2(105.4)

or35-1/2(90.2)

36(91.4)

or30

(76.2)

9(22.9)

8(20.3) 4

(10.2)

9(22.9)


Notes1 Bollard heights are nominal (shown in inches).

2 All lamps (excluding 35CMT6 and 70CMT6) are coated as recommended unless LPI is specified.

3 MVOLT standard with fluorescent lamps and metal halide lamps with electronic ballast option.

4 Light options are mutually exclusive. Choose one per side. For single circuit wiring, LED light option not available with MVOLT or electronic ballast option operating at 277V, or with 347V. For DCT dual circuit option, secondary LED voltage required to be 120V (for primary voltages: 120V, 208V, 347V, MVOLT) or 240V (for primary voltages 240V or 277V).

5 DCT available with LED color wash option only.

6 SF available with 120V, 277V or 347V on HID fixtures only.

7 DF available with 208V or 240V on HID fixtures only.

8 Electronic ballast options available with metal halide lamps only.

9 0-10V remote analog dimmer system required (by others).

10 Available with fluorescent only.

11 LPIC recommended for E17 and ED17 lamps. Not available with fluorescent, 35CMT6 or 70CMT6 HID lamps.

12 Standard louver finish: matte black top, high-gloss white bottom unless __/PL is chosen. __/PL is not recom-mended for DWHG white or other light color finishes due to increased visible glare and reduced fixture cutoff.

Bollards

G2LBW G2LBD


G2LBW G2LBD

PRODUCT INFORMATION

HYD

REL


AR

EA &

WA

LL MO

UN

TED

G2® XTENDPole Mounted

Series Lamp type Voltage Distribution Mounting Options

G2XD Xtend dome

G2XW Xtend wedge

Metal halide

70M

100M

150M


70CM

150CM

70CMT6

150CMT6


70S

150S

Fluorescent

26DTT

32TRT

42TRT

120

208

240

220

277

347

120/277

MVOLT1

TB

SR2 IES Type II

SR3 IES Type III

SR4SC IES Type IV

SR5S IES Type V

SPA Square pole mount

RPA Round pole mount


IBS Internal backlight shield

OLS Obscuring lens

Photocontrol

PE Photocell


Fusing

DF Double fuse3

SF Single fuse3

Ballast



BLS Bi-level switching6

LPI Lamp included Finish






DSPF Rust, textured


CF Custom finish

Optional two-tone finishes

__/GLS Gloss finish on dome/wedge

__/POL Polished finish on dome

Intended Use

Pole-mounted dome or

wedge-shaped enclo-

sures house a range of

high-performance optical

systems for path, plaza and

parking areas.

Construction


housing and door. Fixture

fully sealed with silicone gas-

keting. All hardware pieces

for door and mounting ac-

cessories are stainless steel.

Suitable for wet location.



or semi-matte gray tone or

earth tone colors.

Optics

Distribution: Area – IES Type

II, IES Type III, IES Type IV,

IES Type V.




in various configurations

providing optimum optical

performance. Reflectors are

interchangeable. Segmented

reflectors provide maximum


All HID sockets are porcelain

medium-base or G12 based,

pulse rated for 4KV.

Lens: Molded crowned

tempered borosilicate.

Electrical

Lamp: HID –150W max.

CF – 42W max.

Ballast: High power factor

magnetic ballast standard.

Electronic ballast also avail-

able. Ballast rated for low

starting temperatures.

Installation

Mounting: Luminaire mounts

to 4" square or 4" round

pole, standard aluminum. A

custom 3-3/4" square design

pole with center line reveals

also available.

Listings

U.L., C.U.L., IP65, IES full cut-

off, suitable for wet locations.

Example: G2XW 150M 277 SR2 SPA OLS SF LPI DNAT


24(61.0)

7-3/4(19.7)

12-1/2(31.8)

3-3/4(9.5)

Front

Back

Side


G2XD

7-3/4(19.7)

14(35.6)

3-3/4(9.5)

Front

Back

Side

24(61.0)

G2XW Notes1 MVOLT is standard on all fluorescent or metal halide lamps with electronic ballast option.


3 SF only valid with 120V, 277V or 347V. DF only valid with 208V or 240V; HID only.

4 Electronic ballasts only are available with metal halide lamp types, 150W max.

5 0-10V dimmer required (by others).

6 BLS only available for 150S.

Pole Mounted


G2XW G2XD

PRODUCT INFORMATION

HYD

REL


AR

EA &

WA

LL M

OU

NTE

D

G2® BLOCKBuilding Mounted

Series Orientation Lamp type Voltage Distribution Lens

G2BD Block dome

G2BW Block wedge

DN Downlight

UP Uplight

Metal halide

70M

100M

150M


70CM

100CM

150CM

70CMT6

150CMT6


70S

150S

Fluorescent

26TRT

32TRT

42TRT

2/42TRT

120

208

240

277

347

120/277

MVOLT1

TB

VWFL Very wide fl ood2

SR2 IES Type II

SR3 IES Type III

SR4SC IES Type IV

SR5S IES Type V

FLC

FLC5




OLS Obscuring lens

CFAMB Color fi lter amber

CFBLU Color fi lter blue

CFGRN Color fi lter green

CFRED Color fi lter red

Photocontrol

PE Photocell

Fusing

DF Double fuse4

SF Single fuse4

Ballast




LPI Lamp included DBLB Designer black, textured





DSPF Rust, textured


CF Custom fi nish

Intended Use

The G2® Block Series may be

applied over entries, within

entries, up or down, on all

building sides or in concert

with G2® Edge or G2® Plate

products. Lighting distributions

are symmetric or asymmetric

and project in short, medium

and long confi gurations.

Construction




keting. All hardware for door

and mounting accessories are

stainless steel. Suitable for

wet locations.




earth tone colors.

Optics



IES Type V.




in various confi gurations


performance. Refl ectors are

interchangeable. Refl ectors

include both segmented

and precision-formed








Electrical

Lamp: HID – 150W max. CF –

42W max.

Ballast: Integrally mounted.

Rated for -20°C starting

temperatures.

Installation

Mounting: Surface mounted

over recessed junction box or

conduit stub-out.

Listings


off , suitable for wet locations.

Example: G2BD DN 150M 277 SR2 FLC OLS SF LPI DNAT


7-3/4(19.7)

7-1/2(19.1)

5-7/8(14.9)

R 6-1/8(15.6)

12 Diameter(30.5)

7-1/4(18.4)


G2BD

5-3/4(14.6)

8(20.3)

8(20.3)

8(20.3)

12-1/4(31.1)

12-1/4(31.1)

G2BW

Notes1 MVOLT is standard on all fl uorescent and metal halide lamps with

electronic ballast option.




5 Electronic ballasts only are available with metal halide (150W max), fl uorescent and MVOLT ballasts.



Building Mounted


G2BD

G2BW

PRODUCT INFORMATION

HYD

REL


AR

EA &

WA

LL MO

UN

TED

Series Orientation Lamp type Voltage Distribution Mounting Lens

G2ED Edge dome

G2EW Edge wedge

DN Downlight

UP Uplight

Metal halide

70M

100M

150M


70CM

100CM

150CM

70CMT6

150CMT6


70S

150S

Fluorescent

26TRT

32TRT

42TRT

120

208

240

277

347

120/277

MVOLT1

TB

NSP Narrow spot2

SP Spot

FL Flood

WFL Wide fl ood

WWD Wall wash3

SR2 IES Type II

SR3 IES Type III

SR4SC IES Type IV

SR5S IES Type V

STD Standard for mounting on stub-out, or 3" wide or less junction box

E4S 4O or 4S junction box cover

STDDE Standard direct entry 3/4" NPT

FLC

FLC5




OLS Obscuring lens

CFAMB Color fi lter amber

CFBLU Color fi lter blue

CFGRN Color fi lter green

CFRED Color fi lter red

Photocontrol

PE Photocell

Fusing5

DF Double fuse

SF Single fuse

Ballast




LPI Lamp included Finish






DSPF Rust, textured


CF Custom fi nish

Optional two-tone fi nish

__/ GLS Gloss fi nish on dome/wedge

__/ POL Polished fi nish on dome

G2® EDGEBuilding Mounted

Intended Use

G2®Edge is uniquely suited

for mounting to columns and

mullions. Choice of small-

scale dome or wedge-shaped

enclosures house a wide range

of high-performance optical

systems for safe and secure

perimeter lighting, or accent or

wallwash lighting eff ects.

Construction




keting. All hardware for door

and mounting accessories are

stainless steel. Suitable for

wet locations.




earth tone colors.

Optics



IES Type V. Flood – Narrow

spot, spot, fl ood, wide fl ood,

wall wash.




in various confi gurations


performance. Refl ectors are

interchangeable. Refl ectors

include both segmented

and precision-formed








Electrical

Lamp: HID – 175W max.

CF – 42W max.

Ballast: Integrally mounted.

Ballasts are 100% factory

tested, and rated for -20°C

starting temperatures.

Installation

Mounting: Surface mounted

over recessed, compact junc-

tion box or conduit stub-out.

Listings


off , suitable for wet locations.

Example: G2EW DN 150M 277 SR2 STD FLC OLS SF LPI DNAT


3-3/4(9.5)

13-3/4(34.9)

13-3/4(34.9)

12-1/4(31.1)

12-1/4 Diameter(31.1)

5/8(1.6)

5-5/8(14.3)


G2ED

Notes1 MVOLT is standard on all fl uorescent and metal halide lamps with electronic ballast option.

2 NSP only available with 70CMT6 and 150CMT6.

3 WWD includes 14" extended wall mount; consult factory.



6 Electronic ballasts only are available with metal halide lamps, 150W max.



3-3/4(9.5)

14(35.6)

13-3/4(34.9)

13-3/4(34.9)

12-1/4(31.1)

5/8(1.6)

5-3/4(14.6)

G2EW

Building Mounted


G2EW

G2ED

PRODUCT INFORMATION

HYD

REL


AR

EA &

WA

LL M

OU

NTE

D

Series Lamp type Voltage Distribution Lens3

HP3

HP4

Metal halide HP3

50M

70M

100M

150M1, 2

Metal halide HP4

200M2

250M2

High pressure sodium HP3

50S

70S

High pressure sodium HP4/HP3

100S

150S1, 2

High pressure sodium HP4

250S2

120

208

240

277

347

120/277

TB

HP3

HFW High forward wall

LHW Low horizontal wall

LFW Low forward wall

LLW Low left wall

LRW Low right wall

HSC High symmetrical ceiling

HNC High narrow ceiling

HAC High asymmetrical ceiling

HP4

FLG Flat lens tempered glass

FLP Flat lens polycarbonate

Mounting Options Lamped Finish

HP3 and HP4

BMS Base mount, single

PMS Pole, single

RSB Recessed, splice box

SNB Surface, no box

SPM Pendant, single

SSB Surface, splice box

HP3

PFD Plaster frame, direct entry

PFS Plaster frame, splice box

RDE Recessed, direct entry

SDE Surface, direct entry

Fusing

SF Single fuse4

DF Double fuse5

Receptacle

PER Photocontrol receptacle1, 2, 6

Re-strike

QRS Quartz emergency re-strike

Ballast

SCWA Super constant wattage ballast7


BZ Bronze

GN Green

GR Gray

WH White

CF Custom

Intended Use

Ideal for schools, parking

garages, walkways, airports

and stadiums.

Construction

Housing: One-piece

aluminum die-casting having

knockouts for 4-0 box entry or

independent surface mount-

ing integrated. Accessories

include a cast aluminum

splice box for direct conduit

entry. This unit also is suitable

for pole-, pendant- or base-


Optics

HP3 lens: Molded from clear,

UV stabilized polycarbonate for

maximum impact resistance.

HP4 lens: Unit is provided

with a vandal-resistant pris-

matic lens door. This clear

polycarbonate lens creates

a 180° lateral spread. Flat

polycarbonate or tempered

glass lens also available.

HP3 distribution: See order-

ing guide.

HP4 distribution: High-

performance three-piece

specular reflector assembly is

adjustable through a 70° to 85°

sharp cutoff range. IES Type III

and IV distributions are achiev-

able to 180° lateral spread.

The lens door seals with

silicone gaskets providing

bug and water tightness. The

door is affixed to the housing

with stainless steel tamper-

proof fasteners.

Electrical

Lamp: Metal halide or high

pressure sodium.

HP3: 150W max. with

medium screw base.

HP4: 250W max. with mogul

screw base.

Ballast: Magnetic, high power

factor; minimum starting

temperature is -20°F (-29°C).

Installation

Mounting: To surface-mount

over recessed 4-0 box, or

with recessed post, base or

direct conduit. Also available

as pendant mount.

Listings


locations.

Example: HP3 150M 120 HFW SDE SF LPI BL



15-5/8(39.7)

16-3/8(41.6)

Recessed4-0 box (by others)

11-3/8(28.9)

6-7/8(17.5)

HP4

2-1/4 (5.7)

7 (17.8)

Two 1/4” mounting holes for wall anchor bolts (bolts by others)

Cast knockouts for 4-0 box mounting

HP3

11-3/8(28.9)

12-3/8(31.4)

Recessed4-0 box (by others)

9(22.9)

6-1/4(15.9)

HP3

Cast knockouts for4-0 box mountings

Four 1/4” mounting holes for wall anchor bolts(bolts by others)

3-5/8 (9.2)

12 (30.5)

HP4

HP3HP4

Notes1 Not available with RDE mounting.

2 Not available with RSB mounting.

3 150W maximum; reflector is not adjustable with this lens.

4 SF only is available with 120V, 277V or 347V on MH only.

5 DF only is available with 208V or 240V on MH only.

6 NEMA twist-lock receptacle only. Photocontrol by others.

7 Required on 200M and 250M metal halide lamps.

Building Mounted


PRODUCT INFORMATION

HYD

REL


AR

EA &

WA

LL MO

UN

TED

4760T5/T5HO Linear FluorescentCanopy and Parking Garage

Series Lamp type Voltage Distribution Mounting

4760 2/28T5 Two T5, miniature bi-pin

2/54T5HO Two T5HO, miniature bi-pin

MVOLT

1204

2774

347

CNP Canopy

VCNP Volumetric canopy

GRG Garage

CM Ceiling mount

PDMD_ Pendant mount damp location; specify length 6-48" in 6" increments1

PDMW_ Pendant mount wet location; specify length 6-48" in 6" increments1



HS House side shield

FSS Flush source shield

Hardware option


Ballast

ELN Emergency battery back-up5

GEB95S 0.95 ballast factor, step dimming3

Polarpack®

PLPKX Polarpack® cold-weather start option 120V

PLPKY Polarpack® cold-weather start option 347V6

PLPKZ Polarpack® cold-weather start option 208-277V

Mounting option

EQSM Earthquake seismic mount2

LPI 3000K lamp included

LP35K 3500K lamp included

LP41K 4100K lamp included

DWH Gloss white (standard)

BL Black

BZ Bronze

WH White

DDB Dark bronze


GR Gray

SND Sand

STG Steel gray

CF Custom finish

Intended Use

The Hydrel 4760 Series of

linear fluorescent lighting

fixtures bring the high

performance of T5 and T5HO

lamps to the outdoors. With

the 4760 Series patent-pend-

ing Polarpack® cold-weather

option, full light output is

now a reality to 0°F (-18°C).

The T5 and T5HO lamp perfor-

mance, high-output optical

system, and simple architec-

tural lines make this fixture

series ideal for spreading

soft, even illumination under

canopies, covered walkways

and garages. The 4760 Series

linear fluorescent offers a

high- efficiency fluorescent

option to the outdoor light-

ing market.

Construction

Material: Extruded 6063-T4

aluminum with die-cast

A360 aluminum end caps. All

fasteners are stainless steel.

Tamper-proof hardware.

Optics

Distribution: CNP – Canopy.

GRG – Garage. VCNP – Volu-

metric Canopy.

Lens: Curved high-strength

optical-grade clear acrylic.

Internal diffusion film options

available. House-side shield,

flush source shield.

Electrical


max. T5 or T5HO (two lamps).

Socket: G5 miniature bi-pin.

Voltage: Multi-volt (120 -

277V 50/60 Hz), 347V.

Ballast: Integral electronic

multi-volt, thermally pro-

tected, resetting, class P,

HPF, A+ sound-rated, -20°F

(-29°C) minimum starting

temperature. Polarpack®

cold- weather start options

and emergency battery back-

up options are available.

Installation

Ceiling-mounted over

recessed box conduit stub-

out or pendant-mounted

is not end-to-end. Various

pendant lengths.

Listings

U.L., CUL

Example: 4760 2/54T5HO MVOLT GRG CM LPI DWH


4(10.2)

7-1/2(19.1)

49-1/2(125.7)


Notes1 12" standard length if not specified.

2 Option required for PDMD and PDMW installations located in areas subject to seismic activity. Not available with CM mount.

3 Only available for 2/28T5 lamp type.

4 Only available if ELN is chosen.

5 Must choose 120V or 277V. MVOLT and 347V not available.

6 Not available with ELN or MVOLT.

Site & Area Lighting


PRODUCT INFORMATION

HYD

REL


UN

DER

WAT

ER

4426 BMLED Base Mount - MonochromaticLED Base Mount - Dynamic RGB

Series Material LED type LED color Voltage Distribution Lens Mounting

4426 B Bronze

SWB Saltwater bronze

60LED 60W CLW Cool white

WMW Warm white

AMB Amber

BLU Blue

GRN Green

RBL Royal blue

RED Red

RGB Mixing

120 SP Spot

MFL Medium flood

WFL Wide flood

FLC Flat lens clear BM Base mount

Control Communication to fixture Channel Cord set length Lamped

RGB LED only

3DMX 3-channel DMX 512


RGB LED only

DDX Direct DMX

RGB LED only

ST_ Static1

SQ_ Sequential (specify starting channel)2

CCHAN Custom channels3

CSL_ 10'-120' of cord available in 5' increments LP Lamp installed

Intended Use

The 4426 base mount is

designed for use in fountains,

reflecting pools and for

illuminating waterfalls.

Monochromatic: A non-dim-

ming, one-color light output

available in cool white, warm

white, amber, blue, cyan,

green, royal blue and red

monochromatic colors. The

system shall be composed of

two components: 1) LED array

board and 2) driver. The LED

driver powers via constant

current. With a constant

current driver, LED lumen

output does not change with

temperature variations.

Dynamic RGB: This unit uses

a red, green and blue (RGB)

underwater color-balanced

LED array to create DMX-

controlled color changing

lighting effects. Color

control is achieved through

four channels per fixture,

standard DMX512 hardware,

at a maximum of 44 frames

per second. All channels

have logarithmic power for

finer color and intensity

control. The fourth channel,

intensity, allows the user to

vary brightness without af-

fecting the color. The integral

power supply and DMX

control modules are enclosed

in an attached sealed bronze

combination box. The pro-

prietary DMX control module

senses the LED temperature

and adjusts the LED power

accordingly to yield a lamp

life of up to 50,000 hours

of operation. This lamp life

exceeds any other fixture

designed for this use. For

power and signal hook-up,

the integral combination box

includes a minimum of 10'

of submersible rated power

cable and a minimum of 10'

of submersible rated DMX

signal cable.

Construction

Fixture housing, rock guard

and base: Heavy wall cast

bronze construction. Natural

cast bronze finish.

Gasket: Single-piece molded

U-shaped silicone gasket.


Cord (monochromatic):

Minimum of 10' of #16/3ST

submersible rated cord for

standard 120VAC line. Cord en-

trance is epoxy encapsulated.

Cord length must be specified.

Cord (dynamic RGB): Minimum

of 10' of submersible rated

data cord for DMX512 signal.

Optics

Lens: Clear flat tempered

borosilicate.

Electrical

Voltage: 120VAC 60HZ only.

LED (monochromatic): 60W

monochromatic LED (LED

board included).

LED (dynamic RGB): 60W RGB

LED array. (LED board included.

Control: Standard DMX512.

Three channels per fixture: red,

blue, green or four channels

per fixture: red, green, blue

and intensity.

Low-water protection.

Monochromatic: Temper-

ature-sensing, low-water

cutoff standard.

Dynamic RGB: Temperature

sensing circuit reduces power

to LEDs to prevent damage.

Listings

UL Listed.





Example: 4426 B 60LED CLW 120 SP FLC BM CSL50


7(17.8) 5-7/8

(14.9)

7-1/2(19.0)

15-1/2(39.4)

7-1/2(19.0)


Notes1 Static channels – all fixtures will be programmed with the same

set of numbers, specify starting number.

2 Static channels – all fixtures will be programmed with the same set of numbers, specify starting number.

3 Consult factory.

Fountain & Reflecting Pool Fixtures


PRODUCT INFORMATION

HYD

REL


UN

DER

WATER



Series Material LED type LED color Voltage Distribution Lens Mounting Control

4426 B Bronze

SWB Saltwater bronze

SS Stainless steel

60LED 60W

96LED 96W

RGB Mixing

CLW Cool white

WWW Warm white

AMB Amber

BLU Blue

GRN Green

RBL Royal blue

RED Red

120 WFL Wide flood CLS Convex lens swim NM Niche mount RGB LED only



Communication to fixture Channel Cord set length Lamped

RGB LED only

DDX Direct DMX

RGB LED only

ST_ Static1

SQ_ Sequential (specify starting channel)2

CCHAN Custom channels3

CSL_ 35'-120' of cord available in 5' increments LP Lamp included

4426 NMLED Niche Mount - Monochromatic

LED Niche Mount - Dynamic RGB

Intended Use

The 4426 niche mount is

designed for use in fountains,

reflecting pools and for

illuminating waterfalls.

Monochromatic: These

units offer cool white, warm

white, amber, blue, cyan,

green, royal blue and red

monochromatic colors. The

system shall be composed of

two components: 1) LED array

board and 2) driver. The LED

driver powers via constant

current. With a constant

current driver, LED lumen

output does not change with

temperature variations. Hy-

drel's monochromatic system

is a non-dimming, one-color

light output.

Dynamic RGB: This unit uses

a red, green and blue (RGB)

underwater color-balanced

LED array to create DMX-

controlled color-changing

lighting effects. Color

control is achieved through

four channels per fixture,



at a maximum of 44 frames

per second. All channels

have logarithmic power for

finer color and intensity

control. The fourth channel,

intensity, allows the user to

vary brightness without af-

fecting the color. The integral

power supply and DMX

control modules are enclosed

in an attached sealed bronze

combination box. The pro-

prietary DMX control module

senses the LED temperature

and adjusts the LED power

accordingly to yield a lamp

life of up to 50,000 hours

of operation. This lamp life

exceeds any other fixture

designed for this use. For

power and signal hook-up,

the integral combination box

includes a minimum of 10'

of submersible rated power

cable and a minimum of 10'

of submersible rated DMX

signal cable.

Construction

Fixture housing,rock guard

and base: Heavy wall cast

bronze construction. Natural

cast bronze finish.

Gasket: Single-piece molded

U-shaped silicone gasket.


Cord (monochromatic):



standard 120VAC line. Cord en-

trance is epoxy encapsulated.

Cord length must be specified.

Cord (dynamic RGB):



standard 120VAC line, mini-

mum of 25' of submersible

rated data cord for DMX512

signal. Cord entrance is epoxy

encapsulated. Cord length

must be specified.

Optics

Lens: Clear flat tempered

borosilicate.

Electrical

Voltage: 120VAC 60HZ only.

LED type (monochromatic):

60W monochromatic LED.

(LED board included.)

LED type (dynamic): 60W RGB

LED array. (LED board included.)

Control (dynamic RGB):

Standard DMX512. Three

channels per fixture: red,

blue, green, or four channels

per fixture: red, green, blue

and intensity.

Communication to fixture

(dynamic RGB): DMX512 direct.

Low-water protection

(monochromatic): Temper-

ature-sensing low-water

cutoff standard.

Lower-water protection

(dynamic RGB): Temperature-

sensing circuit reduces power

to LEDs to prevent damage.

Listings

UL Listed.





Example: 4426 B 60LED RGB 120 WFL CLS NM 4DMX DDX ST3 CSL50


Notes1 All fixtures will be programmed with the same set of numbers,

specify starting numbers.

2 Fixtures will be programmed sequentially starting with the number provided by customer.

3 Consult factory.

11-1/4(28.6)

8-7/8(22.5)

2(5.1)

1-3/8(3.5)

4-1/2(11.3)

7-1/2(19.1)

1(2.5)

9(22.9)1-3/8

(3.5)

NicheDirectDMX

Power


PRODUCT INFORMATION

HYD

REL


UN

DER

WAT

ER

Series Lamp type Voltage Distribution Lens Mounting Mounting accessories6 Cord set length Lamped Options

4424

4427

Incandescent

P64500I1

P641000I1

P56300I9

P56500I9

Low-voltage9

P56240ILV

P56300ILV3

122

120

MFL Medium flood

NSP Narrow spot

WFL Wide flood





CLR Convex lens red

BM Base mount

YM Yoke mount5

ALB Adjustable locking base

RSR_ 4"-24" riser stem available in 2" increments7

CSL_ 10'-120' of cord available in 5' increments8

LPI Lamp included


PRODUCT INFORMATION

4424 BM/YM 4427 BM/YM

Intended Use

Lighting for fountains and

reflecting pools – base/

yoke mount.

Construction

Heavy-duty cast bronze.

Example: 4424 P56500I 120 MFL CLC YM CSL120 LPI


Series Lamp type Voltage Distribution3 Lens Mounting Cord set length Lamped Options

4800 Incandescent

100Q

150Q

Low-voltage1

M75

122

120

FL Flood CLC Convex lens clear4



CLB Convex lens blue5

CLG Convex lens green5

CLR Convex lens red

BM Base mount

YM Yoke mount6

CSL_ 10'-120' of cord available in 5' increments7 LP Lamp installed CSA Meets Canadian Standards

PRODUCT INFORMATION Fountain & Reflecting Pool Fixtures

4800 BM/YMIntended Use



yoke mount.

Construction


Example: 4800 100Q 120 FL CLC BM CSL90 LP


Notes1 Other wattages available by request.


3 Distribution included on 12V only.

4 CLC is the default.

5 CLB and CLG not available with 150Q.

6 Consult www.hydrel.com for yoke mount dimensions.

7 CSL50 max. cord length for 12V.

11-3/4(29.8)

11(27.9)

11(27.9)

8(20.3) 10

(25.4

12(30.5)

8(20.3)

8(20.3)

4-1/4(10.8)

4-1/2(11.4)



12(30.5)

10-1/2(26.7)

10-3/4(27.3)

6-3/4(17.1)

4424 4427

Notes 1 Available with 4427 only.2 Transformer sold separately.

3 Available in WFL only.



6 Mounting accessories with ALB only.

7 RSR6 – default with ALB.






PRODUCT INFORMATION

HYD

REL


UN

DER

WATER


Series Lamp type Voltage Distribution Lens4 Mounting Conduit entry Options5 Cord set length7 Lamped Options

4415

4424

Incandescent 4415

1161

200QT3

300QT3

Incandescent 4424

P56300I

P56500I1

Low-voltage 4415

3/M50

3/M75

Low-voltage 4424

P56240ILV

P56300ILV1

122

120

4424

NSP Narrow spot

MFL Medium flood

WFL Wide flood

4415

FL Flood3

4424





CLR Convex lens red

NM Niche mount

4424

34B 3/4" NPT bottom

4415

34S 3/4" NPT side

RG Rock guard

LLV Louver6

CSL_ 35'-120' of cord available in 5' increments

LPI Lamp included

4424

CSA CSA Certified

PRODUCT INFORMATION

Intended Use


reflecting pools – niche mount.

Series Door Material Lamp type Voltage Distribution3 Lens MountingConduit entry Options Cord set length Lamped Options

4800 RD Round, adjustable

SQ Square, fixed

B Bronze

SS Stainless steel7

Incandescent

100Q

150Q

Low-voltage

M751

122

120

FL Flood CLC Convex lens clear4



CLB Convex lens blue5

CLG Convex lens green5

CLR Convex lens red

NM Niche mount

3445B 3/4" at 45°

RG Rock guard6, 7


LPI Lamp included



Notes1 4424: P56300ILV (12V) and P565001

(120V) default.


3 Other distributions available on 3/M50 and 3/M75 only.

4 CLC – default.

5 Required for floor-mounted fixtures.


7 CL50 max. cord length for 12V fixtures.


4800 NMIntended Use


reflecting pools – niche mount.

Notes1 Other wattage available by request.


3 Distribution included on 12V only.


5 Not available with 150Q.

6 Required for floor-mounted fixtures.

7 SS material not available with rock guard.


5-1/2(14.0)

5-1/2(14.0)

6-5/8(16.8)

6-1/8(15.6)

4-3/4(12.1)

Example: 4415 3/M50 12 FL NM 34B RG CSL50 LPI

Example: 4800 RD SS 100Q 120 FL CLC NM 3445B CSL75 LP




11(27.9)

5-3/8(13.7)2-7/8

(7.3)

6-7/8(17.5)

1-1/4(3.2)

7-3/4(19.7)

13(33.0)

10-7/8(27.6)

5/8(1.6)

Louver

Rock guard

4415

4424

4415 NM 4424 NM

4415 NM



4424 NM

PRODUCT INFORMATION

HYD

REL


UN

DER

WAT

ER

SeriesLamp type Voltage Distribution Lens Mounting Cord set length Lamped Options

4413 100Q

150Q

200Q

250Q

300QT4

400QT4

500Q

120 SP Spot

FL Flood

FLC Flat lens clear

FLAM Flat lens amber

FLG Flat lens green

FLR Flat lens red

BM Base mount

CSL_ 10'-120' of cord available in 5' increments

LPI Lamp included


Series Lamp type Voltage Lens Mounting Options Cord set length Lamped

4409 75QT3

100QT3

121

120

FLC Flat lens clear

BM Base mount

DCFAMB Color filter amber

DCFBLU Color filter blue

DCFGRN Color filter green

DCFRED Color filter red


LP Lamp included

4409 BMIntended Use



yoke mount.

Construction


Example: 4409 100QT3 120 FLC BM CSL120 LP

Series Lamp type Voltage Distribution2 MountingMounting accessories3 Cord set length Lamped Options


6(152)

6-1/4(15.9)

4-3/4(12.1)

4-1/2(11.4)



4413 BM Intended Use



yoke mount.

Construction


Example: 4413 500Q 120 FL FLC BM CSL80 LPI


3/4 Typ.(1.9)

8-7/8(22.4)

6-5/8 Max.(16.8)

7-1/2(19.1)

4-1/4 Min.(10.8)

Fixture is height adjustable


4415 BM/YMIntended Use



yoke mount.

Construction


Example: 4415 3/M50 12 FL ALB RSR12 CSL40 LPI

5-3/8(13.7)

1(2.5) 10

(25.4)10

(25.4)

3-1/4(8.3)

4-5/8(11.6)

10-1/2(26.7)

9-1/4(23.5)

5-1/2(14.0)


2 Other distributions available for the 3/M50 and the 3/M75 only.

3 Available with ALB mount only.

4 RSR6 default with ALB.

5 50' max cord length for 12V fixtures.

6 Available in 12V only.


4415 Incandescent

116I

Quartz

200Q

300Q

Low-voltage

3/M502, 6

3/M752, 6

121

120

FL Flood BM Base mount

YM Yoke mount7

ALB Adjus- table locking base

RSR_ 4"-24" riser stem available in 2" incre-ments4

CSL_ 10'-120' of cord available in 5' incre-ments5

LPI Lamp included



2 50' max cord length for 12V fixtures.








PRODUCT INFORMATION

HYD

REL


UN

DER

WATER

Series Material Lamp type Voltage Distribution Lens MountingConduit entry Cord set length Application Lamped Options

4425

4427

B Bronze

SS Stainless steel bezel

Low-voltage1, 2

P56300ILV5

Incandescent

P56500I2

P64500I3

P641000I3

121, 2

120

MFL Medium flood

NSP Narrow spot

WFL Wide flood

CLS Convex lens swim

CLSA Convex lens swim amber

CLSB Convex lens swim blue

CLSG Convex lens swim green

CLSR Convex lens swim red

NM Niche mount

120V only

34B 3/4" NPT bottom

12V only2

1B 1" NPT bottom


SWM Swimming pool

LPI Lamp included


4425 NM SWM 4427 NM SWM

Intended Use

Swimming pool fixtures.

Maximum wattages of each

lamp type listed. Lower

wattages available; consult

www.hydrel.com for more

information.

ORDERING INFORMATION Example: 4425 B P56300ILV 12 WFL CLS NM 1B CSL50 SWM LPI


Series Door Material Lamp type Voltage Distribution Lens Mounting Conduit entry Cord set length4 Application Lamped Options

4800 RD Round

SQ Square

B Bronze

SS Stainless steel bezel

Low-voltage1

M75

Incandescent

100Q

150Q

121

120

FL Flood3 CLS Convex lens swim




CLR Convex lens red


NM Niche mount

3445B 3/4" NPT at 45°

CSL_ 35'-120' of cord available in 5' incre-ments2

SWM Swimming pool

LP Lamp installed


4800 NM SWMIntended Use

Swimming pool fixture.

ORDERING INFORMATION Example: 4800 RD B M75 12 FL CL NM 3445B CSL50 SWM LP

7-3/4(19.5)

13(33.0)

10-7/8(27.6)

5/8(1.6)

7-3/4(19.5)

10-7/8(27.6)

5/8(1.6)

13(33.0)

5-1/2(14.0)

5-1/2(14.0)

6-5/8(16.8)

6-1/8(15.6)

4-3/4(12.1)




44274425

Notes1 12V only; transformer sold separately.



4 50' maximum cord length on 12V fixtures.

5 P56300ILV only available with WFL distribution.

Notes1 12V only; transformer sold separately.

2 50' maximum cord length on 12V fixtures.

3 Only available with M75 lamp; otherwise leave blank.

PRODUCT INFORMATION Swimming Pool Fixtures

PRODUCT INFORMATION Swimming Pool Fixtures

PRODUCT INFORMATION

HYD

REL


UN

DER

WAT

ER

Complementing their underwater lights, is Hydrel’s full line of accessories – manufactured to the

high standards required for underwater fountain and pool products.

Colored LensesGreen, red, amber and blue available for most fixtures.

Potting CompoundPC21 is a re-enterable potting compound which pours yellow and cures transparent so connections

are easily located. It meets NEC requirements for potting underwater junction boxes.

Low-Voltage Transformers

Low-voltage lighting fixtures require that the line voltages be stepped down. This is normally accomplished

with a transformer or a series of transformers located in the pool equipment area. Hydrel offers such parts in

sizes from 100W to 1000W.

Notes Special consideration must be given to the length of cords used with low-voltage underwater fixtures.

6-1/4(15.9)

6-1/4(15.9)

11(29.2)

T1904

Cord SealsConstructed of brass with neoprene grommets, these seals are for use in underwater junction boxes

for fixture cord entrance seals.

B

ACATALOG NUMBER

NPT CORD A B

CS14302 1/2 18-3 7/8 (2.2) 1-1/2 (3.8)

CS143022 1/2 16-3* (3 x 1.5) 7/8 (2.2) 1-1/2 (3.8)

CS14304 3/4 18-3 1-1/4 (3.2) 1-3/4 (4.4)CS14303 3/4 14-3 (2 x 4) 1-1/4 (3.2) 1-3/4 (4.4)CS143032 3/4 12-3 1-1/4 (3.2) 1-3/4 (4.4)CS143033 3/4 10-3 (2 x 6) 1-1/4 (3.2) 1-3/4 (4.4)

B

A

C

SR Strain ReliefA threaded cord grip that prevents cord movement from pulling on connections. Used where J-box is

mounted above the floor or deck.

CATALOG NUMBER

(NPT) CORD A B

SR50 1/2 16-3* 7/8 (2.2) 1-3/8 (3.5)SR754 3/4 18-3 1-1/4 (3.2 1-1/2 (3.8)

SR75 3/4 10-3 1-1/4 (3.2 1-1/2 (3.8)

Notes

* 18-2/16-1 cord fits SR50 and CS143022 parts.

USR Strain Relief 1

Universal strain relief (USR). Strain reliefs, used where J-boxes are mounted flush to floor or deck.

Specify for the total number of fixtures to be mounted.

ALB - Adjustable Locking BaseThis fountain lighting economy base allows for variable fixture height and includes Hydrel’s

pro-focus aim-set feature. Multiple riser heights available.

A

C

StandardStem Length6” (15.2)

B

12(30.5)

CATALOG NUMBER

A B C

ALB15 10-1/2 (26.7) 12-5/8 (32.1) 8-5/8 (21.9)ALB21 7-7/8 (20.0) 11 (27.9) 7 (17.8)ALB22 7-11/16 (19.5) 12 (30.5) 8 (20.3)ALB24 7-11/16 (19.5) 12 (30.5) 8 (20.3)ALB27 7-11/16 (19.5) 12 (30.5) 8 (20.3)

Accessories

Notes1 Specify USR strain reliefs for the total number of fixtures. USR sold separately.

Dimensions are shown in inches (centimeters) unless otherwise noted.

CATALOG NUMBER

DESCRIPTION

PC21 35 CU. IN.PC2112 20 CU. IN.

CATALOG NUMBER

DESCRIPTION

T1901 100W transformerT1903 300W transformerT1904 1000W transformerT1905 500W transformer

MISCELLANEOUS

5-1/8(13.0)

9-1/2(24.1)

4-1/2(11.4)

T1903 and T1905

PRODUCT INFORMATION

HYD

REL


UN

DER

WATER

Outside dimensions:

4-1/2” (11.5) dia. x 3-5/8”

(9.3) deep

Inside dimensions:

2-3/4” (7.1) dia. x 2-1/4” (5.8) deep

(10 cubic inches)

JB1711

JB 1708

JB1710 JB1713

BA

DC

FME

K L

H J

G

Ground screws E F

G H

J

L

N

K

M

P

R S T

pool floor

internalcord sealincluded to fixture

BA

Outside dimensions:

7-5/8” (19.4) x 6-1/2” (16.5) x 4-7/16”

(11.3) deep

Inside dimensions:

5-3/16” (13.2) x 4-1/8” (10.5) x 3-11/16”

(9.4) deep (62 cubic inches)

Outside dimensions:

7-5/8” (19.4) sq. x 4-3/4” (12.1) deep

Inside dimensions:

6” (15.3) sq. x 4” (10.2) deep

(144 cubic inches)

Bottom may have maximum three

1” (2.5) hubs or two 1-1/4” (3.2) hubs

or one 2” (5.1) hub.

Outside dimensions:

7-3/8” (18.8) x 5-3/8” (13.7) x 2-1/2”

(6.4) deep

Inside dimensions:

6” (15.3) x 4” (10.2) x 2” (5.1) deep

(48 cubic inches)

Bottom may have single 1” (2.5) or

1-1/4” (3.2) hub.

A C

DB JK

L

G H

E F

Hydrel underwater junction boxes are designed for the connection of supply cords from underwater foun-

tain fixtures and service conduits. They feature heavy cast bronze construction, neoprene gaskets, internal

ground lugs and stainless steel hardware. All hubs may be tapped either 1/2” NPT or 3/4” NPT with other

drillings available upon request. When ordering, specify the catalog number, hub location and hub size. Letters

around perimeter indicate side drill locations. Letters within box indicate bottom drill locations.

Outside dimensions:

4-3/4” (12.1) dia. x 3” (7.6) deep

Inside dimensions:

3-1/2” (8.9) dia. x 2” (5.1) deep

(25 cubic inches)

Cover may have single 1/2” (1.3) or 3/4”

(1.9) hub.

Bottom may also have single 1” (2.5) hub.

JB1701

Outside dimensions:

3-3/8” (8.6) x 4-3/8” (11.1)

x 2-1/2” (6.4) deep

Inside dimensions:

3” (7.6) x 2” (5.1) x 2” (5.1) deep

(12 cubic inches)

JB1703

Outside dimensions:

4-3/4” (12.1) sq. x 2-1/2” (6.4) deep

Inside dimensions:

3” (7.6) sq. x 2” (5.1) deep

(18 cubic inches)

JB1705

D A

C B

E

F

G

H KL

J

cover Gbottom center H

A C

D B

R

S

BPA

A B

D

C

Outside dimensions:

5-3/8” (13.7) sq. x 2-1/2” (6.4) deep

Inside dimensions:

4” (10.2) sq. x 2” (5.1) deep

(32 cubic inches)

JB1706

Outside dimensions:

7-5/8” (19.4) x 6-1/2” (16.5) x

4-7/16” (11.3) deep

Inside dimensions:

5-3/16” (13.2) x 4-1/8” (10.5) x

3-11/16” (9.4) deep

(62 cubic inches)

g ro u n ds c re w s

BA

DC

FME

K L

H J

G

Accessories

JUNCTION BOXES

Notes

1 Specifically designed for deck or

remote wall mountings, this deck

junction box meets all the require-

ments of the NEC. It features cast

bronze construction, neoprene gaskets,

one hub at each end and two hubs on

one side. The entire bottom and one

side of the box are suitable for drilling.

Fasteners are stainless steel.

Dimensions are shown in inches (centimeters) unless otherwise noted.

JB1719(Deck-Mounted)1

PRODUCT INFORMATION

outdoor lighting - acuity brands

Documents