ouc001101 huawei atae solution system overview issue2.0
TRANSCRIPT
-
1-1
Confidential Information of Huawei.
No Spreading Without Permission
ATAE System Overview
-
1-2
Confidential Information of Huawei.
No Spreading Without Permission
ATAE System Overview
-
1-3
Confidential Information of Huawei.
No Spreading Without Permission
ATAE System Overview
-
1-4
Confidential Information of Huawei.
No Spreading Without Permission
ATAE System Overview
-
EMS: Element Management System
BSS: Basic Service System
NE: Network Elements
1-5
Confidential Information of Huawei.
No Spreading Without Permission
ATAE System Overview
-
Opex: operational expenditure
1-6
Confidential Information of Huawei.
No Spreading Without Permission
ATAE System Overview
-
Facing heavy competition, telecommunication carriers try to seek the method of low costs
and high flexibility, well use the expansible standard platform and transfer to the new-
generation network environment, to integrate services.
The traditional Mini Computer networking is not flexible.
In the beginning, users of new services are few. The small capacity solution is required to
reduce the one-time investment. Afterwards when the traffic increases, it is convenient for
the capacity expansion.
Telecommunication carriers need standardized, modular and flexible networking
telecommunication equipment as well as more flexible solutions.
1-7
Confidential Information of Huawei.
No Spreading Without Permission
ATAE System Overview
-
HW: Hardware
OS: Operating System
MW: Middleware
1-8
Confidential Information of Huawei.
No Spreading Without Permission
ATAE System Overview
-
TCO: Total Cost of Operation
Capex: capital expenditure
Opex: operational expenditure
1-9
Confidential Information of Huawei.
No Spreading Without Permission
ATAE System Overview
-
1-10
Confidential Information of Huawei.
No Spreading Without Permission
ATAE System Overview
-
1-11
Confidential Information of Huawei.
No Spreading Without Permission
ATAE System Overview
-
Advanced telecom computing architecture (ATCA) is developed from the next generation
mainstream industrial computing technology -- CompactPCI standard, which is widely
applied in telecom, astronautics, industrial control, medical appliance, intelligent traffic,
and military facility. The ATCA provides a modularized, compatible, scalable, and excellent
price-performance-ratio hardware architecture for the next generation integrated telecom
and data network application.
Basic features:
Dual -48VDC redundancy power supply
High-speed differential signal connector
8U x 280mm blade size
1.2 inches spaces between every two blades, convenient for heat dissipation design
High-speed hot swap daughter card
Standard Intelligent Platform Management Bus(IPMB), every component in the
system is manageable
Open Software Architecture
1-12
Confidential Information of Huawei.
No Spreading Without Permission
ATAE System Overview
-
A pure ATCA system defined in PICMG 3.X only includes Frame, Computing Board and
Switch Board. So each vendor of ATCA has to provide a complete solution which includes
all of the other management modules as mentioned in above diagram.
Huawei ATAE is one of such commercial system, which is based on ATCA and provides a
powerful environment for telecom system.
ATAE solution is consisted of two parts: hardware and software.
The hardware platform contains:
Shelf: Frame + Computing Board + Switch Board + Management Board
Network Devices
Storage Devices
Rack (Cabinet)
The software part is USM, and USM is consisted of 3 parts: USMAS, DMS and IPA,
that means:
USM = USMAS + DMS + IPA
Furthermore, the whole platform can be managed by Huawei NMS: I2000.
1-13
Confidential Information of Huawei.
No Spreading Without Permission
ATAE System Overview
-
1-14
Confidential Information of Huawei.
No Spreading Without Permission
ATAE System Overview
-
1-15
Confidential Information of Huawei.
No Spreading Without Permission
ATAE System Overview
-
1-16
Confidential Information of Huawei.
No Spreading Without Permission
ATAE System Overview
-
According to the power entry type:
AC Rack: If the entry power is DC, then its called DC rack.
DC Rack: If the entry power is AC, then its called AC rack.
According to the devices installed:
Basic Rack
Shelf, USMstorage, minicomputer, LAN switch.
The necessary configuration of ATAEsmall office can configure one basic
rack only.
Extended Rack
2 shelves.
Storage Rack
Hard disk array.
Network Rack
Network equipments, such as LAN switchfirewallload balancer.
1-17
Confidential Information of Huawei.
No Spreading Without Permission
ATAE System Overview
-
This is just an example, actual deployment may be different.
Below is the introduction of these devices:
Shelf: ATAE solution core hardware.
N240: Minicomputer.
CX300/SUN3510/S3100: Storage.
5624: LAN switch.
1-18
Confidential Information of Huawei.
No Spreading Without Permission
ATAE System Overview
-
The difference between AC rack and DC rack is:
Because the Shelf can accept -48V DC power only, so the AC rack need a AC/DC
power converter.
1-19
Confidential Information of Huawei.
No Spreading Without Permission
ATAE System Overview
-
1-20
Confidential Information of Huawei.
No Spreading Without Permission
ATAE System Overview
-
According to the real configuration on-site, the ATAE solution is 80% the consumption of
the servers. As the consumption is reduced, the air-condition consumption will be reduced
too. The proportion between system consumption and air-condition is 1:3(that means 1W
system consumption need 3W heat dissipation consumption). A full configured ATAE can
save 60000W air-condition consumption every hour compared with the servers.
Advantage hot simulation analysis
Guarantee that the system can run normally under the extreme situation
Local Enforced Cooling Design
Pump air from bottom to top and from front to back; Guarantee the system
dissipating heat equably
Intelligent Cooling Technology
The cooling system can adjust the fan speed according to the internal temperature
Fans Redundancy Protect Technology
The core components of the cooling system -- Fan tray use the double design.
Support the Redundancy Protect.
1-21
Confidential Information of Huawei.
No Spreading Without Permission
ATAE System Overview
-
In this Architecture, we can see these devices:
PC Servers
LAN Switches
FC Switches
Storage
KVM and KVM Switches
Power Cords
Ethernet Cables
Fiber Cables
Too Many kinds of devices, and too many cables, its very hard to maintenance.
1-22
Confidential Information of Huawei.
No Spreading Without Permission
ATAE System Overview
-
In this Architecture, we can see these devices:
Server Boards
Switch Boards
Storage
In ATAE architecture, we just need some boards, they are server boards and switch boards.
The size is much more smaller.
1-23
Confidential Information of Huawei.
No Spreading Without Permission
ATAE System Overview
-
This is the physical device, and you can see all the server boards and switch boards are in
the same frame, and they are connected internally through the backplane which is also
responsible for power supply, so you just need connect it to Internet and storage.
Very simple architecture, highly integrated, easy to understand and maintenance.
1-24
Confidential Information of Huawei.
No Spreading Without Permission
ATAE System Overview
-
1-25
Confidential Information of Huawei.
No Spreading Without Permission
ATAE System Overview
-
1-26
Confidential Information of Huawei.
No Spreading Without Permission
ATAE System Overview
-
iKVM
Simultaneously monitoring four servers
iButton
Remote power-on/off and start/stop (i-Button)
iMedia
Remotely monitoring software and hardware information including BIOS and OS
boot
Remote access by protocols
Linux/Unix OS
Telnet and SSH protocols
Window OS
RDP
1-27
Confidential Information of Huawei.
No Spreading Without Permission
ATAE System Overview
-
1-28
Confidential Information of Huawei.
No Spreading Without Permission
ATAE System Overview
-
High Density and Scalability
1 Rack,2 shelf, 24 Blades
Cascade shelf supported
Calculating: dual and quad-core processors, from Intel, AMD
Storage: internal, attached (SCSI, FC, SAS), Up to many TBs
Networking: 112 GE per shelf
High Reliability
Compliant with NEBS L3 / ETSI
Full redundancy supported, dual power supply
Hot plug replacement of all blades
Electronic anti-misplug Protection
Over-loading Protection of Power Supply
High Availability
Configuration auto-recovery
Software deployment and upgrade by batch
Consolidates management for the entire shelf
iTools for remote maintenance: iButton, iMedia, iKVM
USB based Local KVM
Power-saving
The intelligent variable frequency converting for processor
The intelligent activator for fan
The high conversion efficiency of power supply is up to 90%
High performance fan group
1-29
Confidential Information of Huawei.
No Spreading Without Permission
ATAE System Overview
-
N-30 XX System Introduction
-
1-31
Confidential Information of Huawei.
No Spreading Without Permission
ATAE System Overview
-
N-32 XX System Introduction