others hybrid engine 2 m/e switcher and processor for ... · hybrid engine with 4:2:2 broadcast...
TRANSCRIPT
Hybrid Engine 2 M/E Switcher and Processor for Broadcast and Live Event
All specifications and appearances are subject to change without notice. Company names and product names appearing in this document are registered trademarks or trademarks of their respective owners. Roland is either registered trademark or trademark of Roland Corporation in the United States and/or other countries. It is forbidden by law to make an audio recording, video recording, copy or revision of a third party‘s copyrighted work (musical work, video work, broadcast, live performance, or other work), whether in whole or in part, and distribute, sell, lease, perform, or broadcast it without the permission of the copyright owner. Do not use this product for purposes that could infringe on a copyright held by a third party. We assume no responsibility whatsoever with regard to any infringements of third-party copyrights arising through your use of this product.
Printed in Japan. Sept. 2016 RAM-20060 BLY-PD
proav.roland.com
Display
Video input
Others
Power Supply
Power Consumption
Operation Temperature
Dimensions
Weight
Accessories
7 inch 800 x 480 Graphic color LCD (touch screen) x 2
HDMI (type A) x 2 *1920x1080/60p, 59.94p, 59.94i, 50p, 50i *HDCP Supported
USB: Type A x 1 * USB MemoryLAN: RJ45 100Base-TX (Connect to V-1200HD)PHONES jack: Stereo 1/4-inch phone type×1(80mW+80mW, 32ohms)Internal speaker
AC Adaptor, DC 9V to 16V(XLR-4-32 type) *Can not be used at the same time.
36W
+0 to +40 degrees Celsius +32 to +104 degrees Fahrenheit
520(W)×237(D)×111(H)mm 20-1/2(W)×9-3/8(D)×4-3/8(H)inches *Protruding parts not included.
4.3 kg 9 Ibs 8 oz
AC Adaptor, Power Cord, Owner's Manual
■V-1200HDR Control Surface
*0dBu=0.775Vrms*This product is a Class A digital device under FCC part 15.*In the interest of product improvement, the specifications and/or appearance of this unit are subject to change without prior notice.
■V-1200HD Multi-format Video Switcher
Processing
Input Connectors
Output Connectors
Formats
Effects (4:2:2 Processing)
Effects (4:4:4 Processing)
Still Image
Multiviewer
Audio
Processing
Input Connectors
Output Connectors
Input Level and Impedance
Output Level and Impedance
Formats
Effects
Others
Expansion Slot
Reference
External Connectors
Memory
User Function Button
Remote Camera Control
Remore Controler
Power Supply
Power Consumption
Operation Temperature
Dimensions
Weight
Accessories
4: 4: 4 (Y/Pb/Pr / RGB), 10-bit / 4: 2: 2 (Y/Pb/Pr), 10-bit
3G/HD-SDI: BNC type x 10 *Conforms to SMPTE 424M (SMPTE 425M-AB), 292MHDMI: type A x 2 (HDMI INPUT 1-2) * HDCP Not supportedHDMI: type A x 2 (HDMI INPUT 3-4) * HDCP Supported., Multi-format Supported.
3G/HD-SDI: BNC type x 6 *Conforms to SMPTE 424M (SMPTE 425M-AB), 292MHDMI: type A x 2 (HDMI OUTPUT 1-2) * HDCP SupportedHDMI: type A x 2 (HDMI OUTPUT MULTI-VIEW 1 * HDCP Not required, 1080/60p) (HDMI OUTPUT MULTI-VIEW 2 * HDCP Required, 1080/60p)
SDI: 1080/59.94i, 1080/50i, 1080/59.94p, 1080/50p *Conforms to SMPTE 274MHDMI: 480/59.94i, 576/50i, 480/59.94p, 576/50p, 720/59.94p, 720/50p, 1080/59.94i, 1080/50i, 1080/59.94p, 1080/50p,1024x768/60 (*1), 1280x720/60 (*1), 1280x800/60 (*1), 1366x768/60 (*1), 1280x1024/60 (*1), 1400x1050/60 (*1),1600x1200/60, 1920x1080/60,1920x1200/60RB* Conforms to CEA-861-E, VESA DMT Version 1.0 Revision 11* The output format of HDMI1,2 is always the same.* Frame rate is 59.94(NTSC) or 50(PAL)* MULTI-VIEW 1,2 output is 1080/60p always.(*1)Output refresh rate is 75 Hz when frame rate is set to 50Hz.
M/E: 1 M/E, 1.5 M/E, 2 M/E (9 patterns)Transition: Mix, NAM (*2), FAM (*2), Cut, WipeComposition (Keyer): 4 (PinP, Luminance Key, Chroma Key, External Key supported)AUX: 2Others: Output Fade, Output Freeze, Output Capture, Composition Edit, SDI Output Patchbay*These effects depend on M/E type.(*2)PGM/PST only
M/E: 1 M/E, Matrix, ScalerInput: 4 (4:2:2 Processing outputs x 2, HDMI INPUT 3, HDMI INPUT 4)Transition: Mix, CutComposition(Keyer):1(PinP, Luminance Key)Others: HDCP Supported, Output Fade, Output Cropping, Signal GeneratorThese effects depends on M/E type.
Still Image Inputs: 2, Internal Memory: 16, Maximum 1920x1080 pixelsFormat: Windows Bitmap File (.bmp ) 24 bit per pixel, uncompressed, Portable Network Graphic File (.png) * Alpha channel Supported.
MULTI-VIEW 1 (4:2:2 Processing): 16/10 screens, Label, Tally * HDCP Not required MULTI-VIEW 2 (4:4:4 Processing): 4/10 screens, Label, Tally, OSD Setup Menu * HDCP Required
Sampling Rate : 24 bits/48 kHz
3G/HD-SDI: BNC type x 4 (Ch7-10), HDMI: type A x 4, AUDIO IN (XLR) L (1/2)/R (3/4) *Analog Audio or AES/EBU
3G/HD-SDI: BNC type x 4 (Ch1--4), HDMI: type A x 4, AUDIO OUT (XLR) L (1/2)/R (3/4) *Analog Audio or AES/EBU
AUDIO IN: +4dBu (Maximum: +22dBu, 15k ohms)
AUDIO OUT: +4dBu (Maximum: +22dBu, 600 ohms)
SDI: Linear PCM, 24bits, 48kHz, 16ch * Conforms to SMPTE 299MHDMI: Linear PCM, 24bits, 48kHz, 2chAES/EBU: Linear PCM, 24bits, 48kHz, 4ch
Patchbay: 92 inputs x 92 outputsDelay: 16chMixer: 16ch, channel Effects: 3-Band EQ, Delay Master Effects: Mastering, 3-Band EQ, Reverb
Slot:2*The video a maximum of 2 inputs 2 outputs and the audio a maximum of 16 inputs 16 outputs can treat in 2 slots sum total.
Input: BNC type×1*Black Burst(Sync to frames), Bi-level, Tri-levelOutput/Through: BNC type×1*Black Burst(Sync to frames)
RS-232: DB-9 type (Male) x 1 *for Remote ControlRS-422: DB-9 type (Female) x 1 *for VISCA ControlTALLY/GPIO: DB-25 type (Female) x 1 (Input: 8, Output/Tally: 16)LAN: RJ45 100BASE-TX (Connect to V-1200HDR or Computer (V-1200HD RCS))USB: A type x 2 (USB Memory)
8 * Last Memory Function
32 * 16 buttons x 2 banks
Connector: RS-422 DB-9 type (Female) x 1 Protocol: VISCA
V-1200HDR Control Surface * OptionV-1200HD RCS *Windows7 SP1, OS X 10.9 or later
AC 117V, AC 220V, AC 230V, AC240V(50/60Hz)DC 24V(XLR-4-32 type)*Redundant Power Supply
90 W/0.8 A (117V), 90 W/0.5 A (220V, 230V, 240V), 90 W/3.75 A (DC 24V)*When expansion slot is void.
+0 to +40 degrees Celsius +32 to +104 degrees Fahrenheit
482(W)×357(D)×133(H)mm 19(W)×14-1/16(D)×5-1/4(H)inches *EIA-3U rack mount size
9.0 kg 19 Ibs 14 oz
Power Cord, Rubber Feet(4), Owner's Manual
Video
V-1200HD V-1200HDR
■Dimensions
Unit : mm
482
133
328
34435
7
430
99106
5
237
514
520
The 4:2:2 engine's variety of M/E modes allows for more creative freedom.
This is the highest-performance operation style, capable of
using PGM/PST rows as the final stage in addition to M/E 1. All
four keyers can be used in M/E 1. You can freely change the
priority of each keyer, and even copy keyers. This mode enables
complex mixing operations such as switching a video source
with four compositions to another single video source.
This provides a standard two M/E operation style. Two keyers
can be used with each M/E. Keyer priority can also be assigned
and changed. Not only is re-entry of the video source from M/E
1 to M/E 2 possible, but so is reverse re-entry from M/E 2 to M/E
1. This means you can switch the two M/Es and output them
from a single PGM output. The two M/Es can also be output
independently allowing for applications such as simultaneous
transmission of captions in two different languages.
2 M/E Mode
1.5 M/E Mode
This is a simple operation style using one M/E with four keyers. In
addition to using PGM/PST rows on the main line, you can use two
AUX buses. In this mode, the V-1200HD can be used as a video
distributor or routing switcher making it the ideal primary switcher
for a number of broadcast and live performance applications. In
cases when you want to use three or more AUXes, using the
composition buses lets you achieve up to six additional outputs.
1 M/E Mode
There are two scalers between the 4:2:2 engine and the
4:4:4 engine, and two scalers between HDMI IN 3 and 4
and the 4:4:4 engine. These enable switching, self key
composition, and matrix output. Signals input from HDMI
IN 3 and 4 can be sent to both 4:2:2 process and 4:4:4
process, which means if you choose the latter, you will get
clearer computer images. With the scalers you can also
display a single picture across two screens.
4:4:4 Multi-Format Processor
Flexible M/E
Innovative hybrid processing from RolandIn addition to a 4:2:2 video process widely used for video signals, 4:4:4 signals that are the standard output for computers are handled by a separate processing engine 4:2:2 signals can be upsampled to 4:4:4 signals.
LED Display
LED Display
SDI Recorder
�Dot by Dot
�Split
M/E 2
M/E 1
M/E 1
PGM/PST
M/E 1
PGM1
PGM
AUX1
AUX2
PGM2
+
A comprehensive and flexible multi-format video switcher giving
you complete control of video sources, key layers and mixing
engine configurations. The V-1200HD introduces a unique flexible
hybrid engine with 4:2:2 broadcast switcher and 4:4:4 live event
switcher. In addition to powerful video capabilities, the V-1200HD
also has a built-in 16-channel audio mixer.
•••
•
••••
•
10 SDI and 4 HDMI inputs, and 6 SDI and 2 HDMI outputs
4:2:2/4:4:4 hybrid engine
The 4:2:2 process functions as a 2 M/E switcher that is able to switch 2 M/E, 1.5 M/E, and 1 M/E.
The 4:4:4 process functions as a multi-format processor that supports live presentation, split-screen, and matrix output.
Up to 92 Inputs/Outputs 16-channel audio mixer
Control of up to 7 remote cameras
Optional control surface with a T-fader and dual displays
All switcher functions can be operated from a computer using remote control software, V-1200HD RCS
Input/output expandable via expansion slotsSDI×10
INPUT OUTPUT
HDMI×2
HDMI×2
HDMI×2
SDI×64:2:2PROCESS
4:4:4PROCESS
SDI
HDMI IN 3, 4
HDMI
HDMI
SDI4:2:2
PROCESS
Scaler×2 4:4:4PROCESS
Scaler×2
1 2
Features for changing priority and for copying and pasting settings are built into the four channels of composition (keyers). You can instantly access preset settings through store and recall operations using four memory banks. The number of keyers available in each M/E differs according to the format selected as the 4:2:2 process format.
HDMI inputs 3 and 4 and both HDMI outputs are equipped with scalers that support SD through HD, including data resolutions such as 1366x768 and 1920x1200.This makes it possible to input common data resolutions sent from computers without external converters and transmit signals from the V-1200HD that are matched to the native resolution of the destination display.
Input and output of up to 92 channels of audio embedded in SDI and HDMI signals is possible. Full 16-channel support is provided for SDI audio. A 16-channel audio mixer equipped with EQ, reverb, and delay is also built-in. Powerful patchbay functionality lets you select 16 sources to be assigned to the audio mixer and also accomplish central control of source feeds as a hub not just for video, but for audio as well.
Up to 16 still-images in BMP or PNG format can be stored in the internal memory. The unit supports resolutions up to 1920x1080, and also supports alpha channel for images in PNG format.
Primary inputs are freely assignable to any cross-point location. Quick input changes can be accommodated easily because the source labels follow simultaneously.
All functions and setting changes are accessible from the root menu. This instantly calls up the required operation screen from among the large number of parameters. These operations can be performed not only via the dedicated
Multi-view is indispensable for single-point monitoring of multiple video feeds. The V-1200HD provides two multi-view outputs, MULTI-VIEW 1 for the 4:2:2 process and MULTI-VIEW 2 for the 4:4:4 process. You can assign video sources for the multi-view screen. Three layout patterns are available for the 4:2:2 process.
At this screen, you can make video-related settings such as selecting the M/E mode for the 4:2:2 process or changing the connection destinations for HDMI IN 3 and 4. If you want to output HDMI signals with crystal image on large-sized LED and projector displays, you can specify the 4:4:4 process as the connection destination for HDMI IN 3 and 4 here.
Three M/E modes, 1 M/E, 1.5 M/E and 2 M/E, for the 4:2:2 process are provided to meet the needs of your video production. Each M/E mode has multiple patterns of composition and AUX combinations. Usable composition effects include Self Key(Luminance Key and Chroma Key), External Key and PinP. In cases when you need extra AUXes, you can make settings at the PATCHBAY 1 screen to use unassigned composition buses as AUXes.
Video Structure Support for a Wide Range of Resolutions Audio Structure
Still Memory
Assignable Cross-points
M/E and AUX
Keyers
Multi-view
Processing
V-1200HDR Control Surface, but also by using the free remote control software, V-1200HD RCS, on a connected computer. You can use the software for off-line system configurations and training operatiors.
Multi-view Out for the 4:4:4 Process
Multi-view Out for the 4:2:2 Process
An innovative and flexible system designed to easily realize your full creative potential.
Root Menu
* Two keyers are used when External Key is selected.
* Tablet control available from Windows compatible tablets.
Supported resolutions for the 4:4:4 process
Supported resolutions for the 4:2:2 process
3 4
Along with standard MIX, NAM and FAM
transitions are also built in. With NAM,
mixing proceeds from the picture's
brightest areas, and during the FAM
transition, the luminance level of both Bus
A and Bus B maintain at a certain level.
A dedicated V-1200HDR controller provides fast and accurate operation. Dual touch monitors provide quick and easy operation.
•Examples of Wipe Patterns
Operation
These dual touch monitors let you
display different GUIs on the left and
right. Incoming video signals from the
HDMI connectors on the rear panel
can also be displayed.
Dual Touch Monitors
This monitors the HDMI audio input into
the console.
Phones Jack
The large value knob and exit/enter buttons
allow you to adjust value settings instantly.
Value Knob
This adjusts the volume level of
mixed audio.
Audio Master Volume
These save screens displayed on the monitors
as presets and recall one when needed.
Layout Buttons
Although the control surface is designed in
the style of one M/E, you can use these two
buttons to switch between the two M/Es.
M/E Transition Selection
The large T-fader provides precise manual
operation for switching.
T-fader
Transition buttons provide accurate, full
control of operations for the next take.
Transition Block
These change the selection targets for
the AUX bus buttons.
Delegation Block
Primary video inputs are freely
assignable to any cross-point location.
The name of the source appears at the
bottom of the display, reducing
operation errors.
Cross-point Display
These select video sources output to
the AUX buses or video channels used
for composition. They also access to
assigned user presets.
AUX Bus Buttons
This broad range of cross-point
switches affords a commanding view
of 16 sources at one time.
Cross-point Buttons
In addition to an AC adapter, the unit
can be powered by a 12V battery.
Connecting both at the same time
provides redundant power.
Redundant Power
All the functionality required for operation of a high-end switcher, in an efficient compact size.
FAM and NAM transitionsOrdinary MIX transition
Video A Video AVideo B Video B
•V-1200HD menus shown on the left and right displays
•The V-1200HD's multi-view output shown on the right display
You can input video to the dual monitors. If you
connect the main unit's multi-view outputs to the
V-1200HDR's HDMI inputs, the multi-view content
will display on the V-1200HDR's built-in screens.
HDMI Input
* HDCP supported
An Ethernet cable connects the V-1200HDR to the main unit.
Using an Ethernet hub lets you connect up to two controllers,
V-1200HDR units or computers on which the dedicated remote
control sofware V-1200HD RCS is installed, to the V-1200HD.
LAN Port
* Use a Cat 5e or higher cable for connection.
Wireless LAN device
V-1200HD V-1200HDR
EthernetHUB
Setup Example
The positioner used for adjusting X, Y and
Z parameters provides flexible control of
the remote cameras.
Positioner
V-1200HD
5 6
Multi-format support for a diverse range of inputs and outputs.Two expansion slots are provided for even more compatibility.
ApplicationHardware
The flexible workflow and functionality supports a wide variety of live production applications.
Along with importing still images for storage in internal memory, this is used for saving and loading settings for the V-1200HD as well as for updating the firmware.
USB PortThese monitor the status of the connection between the main unit and the control surface, the cooling fan and the power supply.
LED Status IndicatorsMenu Buttons
Video in the 4:2:2 process can be monitored via MULTI-VIEW 1.An ordinary computer display can be used for monitoring.
Multi-view Output 1
* HDMI IN 1 and 2 each supports the upper two channels of embedded audio input.
These can be used for both 4:2:2 process and 4:4:4 process. The 4:4:4 process supports HDCP.
4:4:4 HDMI Input
* HDMI IN 3 and 4 each supports the upper two channels of embedded audio input.* 4:2:2 process doesn't support HDCP.
These output the mixed video by the 4:4:4 process.
HDMI Output
Video in the 4:4:4 processor can be monitored via MULTI-VIEW 2. * Using an HDCP-compatible display for monitoring is recommended.
Multi-view Output 2Either two analog channels or four AES/EBU channels are selectable for the XLR audio input/output connectors.(Input and output share a common format.)
XLR Audio Input/Output
Dedicated HDMI inputs for 4:2:2 process with color space selection and color correction. * HDCP is not supported.
4:2:2 HDMI Input
* HDMI IN 1 and 2 each support the upper two channels of embedded audio input.
The six SDI outputs support 3G and HD. Each output is individually switchable to PGM, FTB, and still image.
SDI Output
* SDI OUT 1 through 4 can each embed 16-channel audio.
The ten SDI inputs support 3G and HD. All inputs are equipped with color correction.
SDI Input
* SDI IN 7 through 10 each supports 16 channels of embedded audio input.
This connects to a video monitor capable of tally input or a tally light system to illuminate the tally lamps.You can also use it to transmit and receive control signals between the unit and an external device.
TALLY/GPIO Connector
An Ethernet cable connects the console and the main-unit processors. Using an Ethernet hub lets you connect up to two controllers, V-1200HDR units or computers on which the dedicated remote control sofware V-1200HD RCS is installed, to the V-1200HD.
LAN Port
The V-1200HD accommodates both AC and DC 24V power sources. Connecting both establishes a redundant power supply.
Redundant PowerThe unit's functionality can be extended through two expansion slots. These make it possible to add input and output.
Expansion Slots
The RS-422 connector allows you to connect and control VISCA-compatible cameras. The RS-232 connector is used for remote control from an external device.
Remote ConnectorsBlack burst, 2-value, and 3-value input are supported. In addition to loop-through, installing a generator for output is also supported.
Reference
Live-performance Production
Classrooms and Event Halls
Events and Conferences
Broadcast Studios
A wide variety of video effects are ideal for all kinds of broadcast studios.
Composition with freely selectable priority can be accomplished
using the four scaler-equipped keyers. The system also features
high-end Chroma Key, as well as the External Key essential for
title compositing. In addition to PGM and PVW output, two
AUX buses are usable for output (when in the 1M/E mode).
Multiple M/E choices allow for a diverse range of video production applications in one switcher.
The V-1200HD is ideal as a main switcher for concert recording and
for a live feed. Through a variety of multi-view functions, even a
large number of sources can be checked at a glance. The M/E
configuration can be varied as desired to meet the needs of the
production. Control up to seven remote cameras ensures creative
productions even with limited camera operators.
Supporting a rich range of control as a video/audio hub.
The full-featured routing functionality enables conversion and
distribution of a high number of video sources in a variety of
formats. The V-1200HD can also achieve remote operation as a
video/audio source hub from a variety of control terminals and
programs. In addition to just simple video switching, the system also
offers functions available only on production switchers, such as
distributing PinP video to various locations.
Equipped with HDMI input and output with multi-format support. Freely mix computer and video sources and output to a wide range of displays and devices.
Along with ten 3G/HD-SDI inputs, the V-1200HD features four HDMI
inputs. Six 3G/HD-SDI and two HDMI outputs are also provided.
Among these, two HDMI inputs and outputs offer multi-format support.
Computer sources with varying resolutions and frame rates are supported
without a need for video converters. The signal is passed directly to the
4:4:4 process, so it can be output, unchanged, at the same high resolution.
* "VISCA" is a trademark of Sony Corporation.
7 8
Block Diagram
444
PRO
CESS
XPT
SCA
LER
FSM
IX /
CUT
LUM
INA
NCE
KEY
CRO
PPIN
G
MU
LTI-F
ORM
AT
PRO
CESS
OR
FTB
FTB
SIG
NA
L G
ENER
ATO
R
SDI 1
SDI 2
SDI 3
SDI 4
SDI 5
SDI 6
SDI 1
SDI 2
SDI 3
SDI 4
SDI 5
SDI 6
SDI 7
SDI 8
SDI 9
SDI 1
0EX
PAN
SIO
N
SLO
T A
EXPA
NSI
ON
SL
OT
BEX
PAN
SIO
NSL
OT
B
EXPA
NSI
ON
SLO
T A
USB
MEM
ORY
from
CA
PTU
RE
PGM
, PVW
, XPT
1-1
- XPT
2-4
to M
ULT
I-VIE
W 1
to M
ULT
I-VIE
W 2
from
INPU
T
from
INPU
T
HD
MI 1
HD
MI 2
HD
MI 1
HD
MI 2
REF
IN
REF
OU
T /
REF
THRU
HD
MI 3
HD
MI 4
SCA
LER
POST
PRO
CESS
B1RERE
RE-E
NTR
Y
S1 S2B2 B3 B4 B5 B6
B1 B2 B3 B4 B5 B6
to S
TILL
MEM
ORY
CAPT
URE
HD
MI
MU
LTI-V
IEW
1
HD
MI
MU
LTI-V
IEW
2
STIL
L 2
STIL
L 1
SIG
NA
L G
ENER
ATO
R
SYN
C G
ENER
ATO
R
INPU
T
Vid
eo B
lock
OU
TPU
T
EXPA
NSI
ON
4 IN
x 2
OU
TIN
PUT
PATC
HBA
Y
168
from
VID
EO S
TRU
CTU
RE
SDI 7
16ch
92ch
16ch
16ch
16ch
16ch
16ch
16ch
16ch
SDI 1
SDI 8
16ch
16ch
16ch
16ch
16ch
SDI 2
SDI 9
16ch
16ch
SDI 3
SDI 1
016
ch16
chSD
I 4
HD
MI 1
*22c
h2c
h
HD
MI 2
*22c
h2c
h
2ch
2ch
HD
MI 4
*22c
h2c
h
XLR
1/2
*32c
h2c
h
XLR
3/4
*3
HD
MI 1
HD
MI 2
MU
LTI-V
IEW
1
MU
LTI-V
IEW
2
2ch
2ch
EXPA
NSI
ON
SL
OT
A
EXPA
NSI
ON
SL
OT
B
EXPA
NSI
ON
SLO
T A
EXPA
NSI
ON
SLO
T B
DEL
AY
INPU
T
INPU
T
OU
TPU
T
OU
TPU
T
MIX
ER
INPU
T1–
16
REVE
RBSE
ND
REVE
RBLE
VEL
LEVE
LA
UD
IOFO
LLO
WM
AIN
LEVE
L
SIG
/PEA
KPA
N
PAN
MA
IN L
MA
IN R
SOLO
L
SOLO
R
PEQ
DEL
AY
SIG
/PEA
K
AU
X1SE
ND
AU
X2
PRE/
POST
AU
X1PR
E/PO
ST
AU
X2SE
ND
REVERB
MAIN LMAIN R
SOLO LSOLO R
AUX 1AUX 2
SOLO
SIG
/PEA
K
SIG
/PEA
K
SIG
/PEA
K
MU
TE
MU
TE
MU
TE
AU
X1LE
VEL
AU
X1
AU
X2LE
VEL
AU
X2
PATC
HBA
YPA
TCH
BAY
STIL
L
16 S
LOTS
MEM
ORY
422
PRO
CESS
MIX
, FA
M, N
AM
WIP
E
EXTE
RNA
L KE
YLU
MIN
AN
CE K
EYCH
ROM
A K
EYPi
nP
2M/E
, 1.5
M/E
, 1M
/EA
UX
2M/E
SW
ITCH
ER
COM
POSI
TIO
N
TRA
NSI
TIO
N
PATC
HBA
Y2 6 IN
6 O
UT
PATC
HBA
Y1
16 IN
8 O
UT
XPT
10ch
(108
0p x
8)
FREE
ZE(O
ne b
us o
nly)
FS16 IN
8 O
UT
XLR
1/2
*3
XLR
3/4
*3
REVE
RB
PEQ
SCA
LER
MA
STER
ING
*1
*1
FTB
FTB
FTB
FTB
FTB
FTB
MU
LTI-V
IEW
1
MU
LTI-V
IEW
2
EXPA
NSI
ON
OU
TPU
TPA
TCH
BAY
6 IN
x 2
OU
T
2 IN
4 O
UT
HD
MI 3
*2
*1.
Whe
n H
DC
P is
on,
the
inpu
t si
gnal
can
onl
y be
out
put
to t
he X
LR a
nalo
g ou
tput
s an
d th
e H
DM
I out
puts
tha
t ar
e co
nnec
ted
to H
DC
P co
mpl
iant
dev
ices
.*2
. W
hen
anal
og is
sel
ecte
d, t
he X
LR c
onne
ctor
s ar
e m
ono
only
.*3
: W
hen
the
audi
o se
lect
or s
wit
ch is
set
to
AES
/EBU
, 2
chan
nels
eac
h of
AES
/EBU
inpu
t an
d ou
tput
are
pos
sibl
e. W
hen
the
swit
ch is
set
to
AN
ALO
G,
1 ch
anne
l eac
h of
inpu
t an
d ou
tput
are
pos
sibl
e.
Aud
io B
lock
Options
A diverse selection of option cards for video and audio system expansion.
● Equipped with two input and two output SDI connectors.
● Two scalers are built in.
● Connect to 4:2:2 engine
SDI Expansion Interface
XI-SDI● Equipped with two DVI-I connectors for switchable
bidirectional input/output, with support for analog
RGB, DVI-D, and HDMI signals.
● Two scalers are built in.
● Connect to 4:2:2 engine*Analog RGB is supported input only.
DVI Expansion Interface
XI-DVI
VC-1-HS
VC-1-DL VC-1-SHSDI to HDMIFS Delay
VC-1-SCScan Converter HDMI to SDI
VC-1 Series Video Converters
Converters enabling input/output expansion and format conversion however you like.These provide support for upgrading systems to achieve low heat generation and lossless conversion.
Bi-directional conversion of video and audio signals from HDMI to SDI or SDI to HDMI with Frame Sync and Delay
Conversion of digital signals of SDI and HDMI and analog signals of RGB, component and composite to SDI or HDMI
Conversion of video and audio signals from SDI input to HDMI output
Conversion of video and audio signals from HDMI input to SDI output
9 10