oss8.0.0 demo prerequisites
TRANSCRIPT
OSS DEMONSTRATION SUITE RELEASE 8.0.0
Demo Prerequisites
Demonstration Script
© 2011 Amdocs. All Rights Reserved.
The included software and/or documentation cannot be reproduced, downloaded, disseminated, published,
transferred, or combined with any other materials, in whole or in part, in any form or by any means, without the prior
written consent of Amdocs. The included software may contain and utilize third-party software products. These
materials are confidential, and shall be returned to Amdocs upon request.
Amdocs reserves the right to revise the included software and/or documentation and to make changes in the content
from time to time without notice. The trademarks and service marks of Amdocs, including the Amdocs mark and
logo, Ensemble, Enabler, Clarify, Return on Relationship, Intelecable, Collabrent, Intentional Customer Experience,
QPASS and Cramer are the exclusive property of Amdocs, and may not be used without permission. All other marks
are the property of their respective owners.
Document Information
Release: 8.0.0
Publication Date:
Catalog Number:
Information Security: Level 1 – Confidential
Created: 7/31/2009 3:20:00 PM
Account/FOP:
Author:
Editor:
Last Edited: 07/31/2009 3:21:48 PM
File Name: OSS8.0.0 Demo Prerequisites.docx
Template: Product.dot
Information Security Level 1 – Confidential iii Proprietary and Confidential Information of Amdocs
Table of Contents
1 Introduction ................................................................................................................. 5
2 Oracle 11.1.0.6.0 .......................................................................................................... 6
3 Oracle 11.1.0.7.0 Patch ............................................................................................... 9
4 Creating the 11g Listener ......................................................................................... 13
5 Installing WebLogic 10.3.1 ....................................................................................... 18
6 Oracle Fusion Middleware ........................................................................................ 22
6.1 Amdocs Employees ........................................................................................................... 22
6.2 Partners ............................................................................................................................. 22
7 Installing Java JRE ................................................................................................... 27
8 Additional Prerequisites ........................................................................................... 30
8.1 Internet Explorer 7 ............................................................................................................. 30
8.2 Adobe Acrobat Reader ...................................................................................................... 30
8.3 AlternaTIFF ........................................................................................................................ 30
8.4 DWF Viewer....................................................................................................................... 30
8.5 ANT .................................................................................................................................... 30
Information Security Level 1 – Confidential 5 Proprietary and Confidential Information of Amdocs
1 Introduction
This document describes in detail the software that must be installed before the OSS 8.0.0
demo can be installed.
The document contains screenshots of the process to aim installation.
The document has many pages, but it does not take long to install the prerequisites, so please
follow the process carefully.
Please do not skip sections or pages.
If you already have some of the prerequisites installed, please still follow the steps before and
make sure there are no differences between your environment and the steps detailed below.
If at any time during the installation a popup Windows Security Alert appears as show below,
click Unblock.
OSS 7.5 Demo Prerequisites Demonstration Script
6 Information Security Level 1 – Confidential
Proprietary and Confidential Information of Amdocs
2 Oracle 11.1.0.6.0
This section describes the installation of Oracle Database Server 11.1.0.6.0 Enterprise
Edition.
Before starting the installation, if you have any previous installations of Oracle, ensure all
services have been stopped. This can be checked by going to Start->Control Panel-
>Administrative Tools->Services. Ensure any services starting with the name OracleXXXX
have been stopped and set to manual. The Startup Type can be changes by right clicking the
service and choosing properties.
OSS8 only requires Oracle 11g. Therefore, if you do not wish to keep previous versions of
the demo you can remove these using the installer supplied with the demo and use the Oracle
Universal installer to uninstall the previous versions of Oracle.
If your operating system is Windows 7, you
must first right click on Setup.exe, select
Properties, then the Compatibility tab and
check “Run this program in compatibility
mode for Windows XP (Service Pack 3)”.
Click OK to apply the change and close the
Properties windows.
Double click Setup.exe
If you have an existing Oracle installation,
make sure the Oracle Base Location is the
directory containing the “oradata” and
“admin” directories. This is where the
database files will be located when a database
is created. In this example we have used
“c:\oracle”.
Change the Oracle Home Location to the
directory where the 11g product should be
installed. In this example we have used
“c:\oracle\products\11.1.0”.
Uncheck the option to create a starter
database and click Next.
Document Release Information
Information Security Level 1 – Confidential 7 Proprietary and Confidential Information of Amdocs
You may receive the warning shown
opposite. If so, check the ‘User Verified’
checkbox and click Next to continue the
installation.
Click Install
The installation will take a few minutes.
OSS 7.5 Demo Prerequisites Demonstration Script
8 Information Security Level 1 – Confidential
Proprietary and Confidential Information of Amdocs
Once the installation has completed, click
Exit.
If running Windows 7, you may see a
Compatibility assistant popup at this point.
Select “This program installed correctly”.
Document Release Information
Information Security Level 1 – Confidential 9 Proprietary and Confidential Information of Amdocs
3 Oracle 11.1.0.7.0 Patch
This section describes the installation of Oracle Database Server 11.1.0.7.0 Patchset.
First, we must stop some of the services
running on your machine.
Go to Start->Control Panel->
Administrative Tools->Services
Stop any services that start with the name
“Oracle”.
If your operating system is Windows 7, you
must first right click on Setup.exe, select
Properties, then the Compatibility tab and
check “Run this program in compatibility
mode for Windows XP (Service Pack 3)”.
Click OK to apply the change and close the
Properties windows.
Click Next
OSS 7.5 Demo Prerequisites Demonstration Script
10 Information Security Level 1 – Confidential
Proprietary and Confidential Information of Amdocs
The Oracle Universal Installer presents
default values, which may not be your
correct Oracle 11g Home and therefore
should not be selected without being
checked.
Click the "Installed Products" button which
provides a list of the Oracle Homes. Select
the 11g home and the location (path) will be
shown.
It is this home and location that should be
selected as the name and path, into which the
patch must be installed.
Make sure your correct Oracle 11.1.0.6.0
home is selected and click Next.
You will now be asked if you wish to receive
update information. Uncheck “I wish to
receive security updates via metalink” and
click Next.
When you see this dialog, click Yes.
Document Release Information
Information Security Level 1 – Confidential 11 Proprietary and Confidential Information of Amdocs
In the prerequisites check page, click Next.
In the Summary page, check the paths are
correct and click Install.
The installation will now start, this could take
a while to complete.
OSS 7.5 Demo Prerequisites Demonstration Script
12 Information Security Level 1 – Confidential
Proprietary and Confidential Information of Amdocs
Occasionally during the installation, you may
receive the error shown. If so, click Ignore
and the installation will continue.
At the end of the installation, click Exit.
Restart your PC before continuing.
If running Windows 7, you may see a
Compatibility assistant popup at this point.
Select “This program installed correctly”.
Document Release Information
Information Security Level 1 – Confidential 13 Proprietary and Confidential Information of Amdocs
4 Creating the 11g Listener
This section describes the steps necessary to create an Oracle 11g listener.
We must first start the Oracle Net
Configuration Assistant.
If your operating system is Windows 7, you
must first right click on Click on Start->All
Programs->Oracle - OraDb11g_home1-
>Configuration and Migration Tools->Net
Configuration Assistant , select Properties, then the Compatibility tab
and check “Run this program as an
administrator”. Click OK to apply the change
and close the Properties windows.
Click on Start->All Programs->Oracle -
OraDb11g_home1->Configuration and
Migration Tools->Net Configuration Assistant
Select ‘Listener configuration’ and click Next
OSS 7.5 Demo Prerequisites Demonstration Script
14 Information Security Level 1 – Confidential
Proprietary and Confidential Information of Amdocs
Press Next
Press Next
Press Next
Make sure the port is 1521.
Press Next
Document Release Information
Information Security Level 1 – Confidential 15 Proprietary and Confidential Information of Amdocs
Press Next
Click Next and then Finish.
Click on Start->Control Panel->System-
>Advanced->Environment Variables
If present, delete the system variable
ORACLE_HOME
OSS 7.5 Demo Prerequisites Demonstration Script
16 Information Security Level 1 – Confidential
Proprietary and Confidential Information of Amdocs
If present, delete the system variable
PERL5LIB
Click OK
Next we will remove any reference to a specific network (for instance corp.amdocs.com)
from the Oracle files. If you are running your demo on a laptop, this can cause problems
when away from the network.
Navigate to your Oracle 11g home (in our above example we used
“c:\oracle\products\11.1.0” but for Windows 7 you may have installed it within c:\app) and
then navigate to (your oracle home)\network\admin.
Open listener.ora using notepad and remove any “corp.amdocs.com”. For instance:
(ADDRESS = (PROTOCOL = TCP)(HOST = LAPTOP01.corp.amdocs.com)(PORT = 1521)) to (ADDRESS = (PROTOCOL = TCP)(HOST = LAPTOP01)(PORT = 1521))
If running Windows 7, you may need to
change permissions on the .ora files before
being able to save the changes.
Right click on listener.ora, select Properties ->
Security -> Edit and for Authenticated Users
all ow Full Control.
Document Release Information
Information Security Level 1 – Confidential 17 Proprietary and Confidential Information of Amdocs
Once the demo is installed, you will find a tnsnames.ora file in this location also. You should
also check there are no references to your network.
The most common failure installing the OSS demo is due to Oracle installation problems so
please double check the above steps have been completed correctly.
Please restart your PC and complete the following checks to confirm the installation has
been successful.
After the restart, open a command prompt window and type SQLPLUS /NOLOG. You should
see the version of SQLPLUS as 11.1.0.7.0.
Type EXIT to return to the command prompt. Now check the listener version by running LSNRCTL STATUS.
Check the listener is running (i.e. no errors) and the version is 11.1.0.7.0.
OSS 7.5 Demo Prerequisites Demonstration Script
18 Information Security Level 1 – Confidential
Proprietary and Confidential Information of Amdocs
5 Installing WebLogic 10.3.1
This section describes how to install BEA WebLogic 10.3.1
Copy the WebLogic installation EXE to a
temporary directory on your PC and double
click wls1031_win32.exe
After the installer has initialized Click Next
Click “Create a new Middleware Home” and
make sure the path is set to “c:\bea”. Click
Next.
Uncheck the “My Oracle Support” check
box. When asked if you wish to remain
uninformed of security issues, select Yes.
Click Next.
Document Release Information
Information Security Level 1 – Confidential 19 Proprietary and Confidential Information of Amdocs
Select Custom and click Next
Ensure the selected components match those
shown in the screenshot. Click Next
Click Next
OSS 7.5 Demo Prerequisites Demonstration Script
20 Information Security Level 1 – Confidential
Proprietary and Confidential Information of Amdocs
Change the product installation directory to
“c:\bea\weblogic103”.
Click Next.
Click Next.
Document Release Information
Information Security Level 1 – Confidential 21 Proprietary and Confidential Information of Amdocs
Click Next
The installation will now begin.
Once the installation is complete, uncheck
the ‘Run Quickstart’ option and click Done
OSS 7.5 Demo Prerequisites Demonstration Script
22 Information Security Level 1 – Confidential
Proprietary and Confidential Information of Amdocs
6 Oracle Fusion Middleware
The Configurator product requires an apache server to run the homepages and reports.
In previous releases, the Oracle 9i Apache server was used. Since this is no longer
supported and therefore is no longer available from Oracle, the Oracle Fusion
Middleware product should be used. This section outlines the process of installing
this product.
The full installation of the product only needs to be carried out by partners.
Internal Amdocs employees can use the prerequisites DVD to install the cut
down version.
6.1 Amdocs Employees The prerequisite DVD contains a zip file called
“Oracle_FusionMiddleware111120_Cut-Down.zip”. Extract this file to the “c:\bea”
directory so that after the extraction, the directory contains “c:\bea\Oracle_WT1”.
Below is an example of the directory structure:
6.2 Partners Since Amdocs cannot distribute Oracle components, it is necessary to complete the
full Oracle FM installation. Start by getting the Oracle FM product version 11.1.1.2.0
from the Oracle website and run setup.exe.
Document Release Information
Information Security Level 1 – Confidential 23 Proprietary and Confidential Information of Amdocs
Click Next.
Choose “Install and Configure”. Click Next.
Click Next.
OSS 7.5 Demo Prerequisites Demonstration Script
24 Information Security Level 1 – Confidential
Proprietary and Confidential Information of Amdocs
Ensure the Oracle Middleware Home is set to
“c:\bea” and the Oracle Home Directory is
set to “Oracle_WT1”.
Uncheck all options apart from the Oracle
HTTP Server.
Set the Instance Home Location to
“C:\bea\Oracle_WT1\oraclefm11”, the
Instance Name to “instance1” and the OHS
Component Name to “ohs1”.
Document Release Information
Information Security Level 1 – Confidential 25 Proprietary and Confidential Information of Amdocs
Choose “Auto Port Configuration”. Click
Next.
Uncheck “I wish to receive security updated
via My Oracle Support”. Click Next. When
asked for confirmation, click Yes.
To start the installation, click Install. When
the installation is complete, click Next and
then Finish.
OSS 7.5 Demo Prerequisites Demonstration Script
26 Information Security Level 1 – Confidential
Proprietary and Confidential Information of Amdocs
The installer created a service. This service
needs to be stopped and set to manual. To do
this, open the Windows Services by click
Start->Run and typing services.msc. Locate
the service called “Oracle Process Manager
(instance1)”. Right click the service and
click Properties. Set the Startup Type to
Manual and then click Stop. Once the
service has been stopped, click OK and close
the services window.
Document Release Information
Information Security Level 1 – Confidential 27 Proprietary and Confidential Information of Amdocs
7 Installing Java JRE
This section describes how to install Java JRE 1.6.0_14
Double click on jre-6u14-windows-i586.exe
Click Install
The installation will take several minutes
Once complete, click Close
OSS 7.5 Demo Prerequisites Demonstration Script
28 Information Security Level 1 – Confidential
Proprietary and Confidential Information of Amdocs
Click on Start->Control Panel->Java (if using
Windows 7 you may need to change the
Control Panel view from ‘View by Category’
to ‘View by icons’ to see the Java option)
Click on “Settings” and ensure that the “Keep
temporary files on my computer” is
unchecked.
Click OK to confirm any changes.
Document Release Information
Information Security Level 1 – Confidential 29 Proprietary and Confidential Information of Amdocs
Click on the Update tab and uncheck the
“Check for Updates Automatically” option.
Click on “Never Check”.
Finally click on “OK” to
OSS 7.5 Demo Prerequisites Demonstration Script
30 Information Security Level 1 – Confidential
Proprietary and Confidential Information of Amdocs
8 Additional Prerequisites
This section describes additional software that is required to fully run the OSS demo.
8.1 Internet Explorer 7 on Windows XP If required the demo can be run with Internet Explorer 7 on Windows XP. Internet Explorer
7 can be downloaded from the following page.
http://www.microsoft.com/windows/internet-explorer/ie7/
8.2 Adobe Acrobat Reader Download a copy of Adobe Acrobat Reader from Adobe’s website.
8.3 AlternaTIFF To full view external documents within the OSS demo, download AlternaTIFF from http://www.alternatiff.com/install-ie/
8.4 DWF Viewer To full view external documents within the OSS demo, download an Autodesk DWF Viewer.
For Amdocs internal installations, the prerequisites DVD includes a DWF Viewer.
8.5 ANT To run the Sync Engine and Planning Engine demos, Ant must be installed. To check if Ant
is already installed, enter “ant –version”, in a cmd prompt. If either an error is reported or you
have an older version than 1.6.5, please follow the instructions below.
Download the following file and unzip it to somewhere appropriate on the PC. For
example into the C:\ drive, which generates C:\apache-ant-1.6.5.
http://archive.apache.org/dist/ant/binaries/apache-ant-1.6.5-bin.zip
Open the system properties by right clicking on 'My Computer', then select the 'Advanced'
tab and click on 'Environment Variables'.
In the System variables box click new and enter the following to create the ant home. If you
already have ant installed then please update the existing entries.
Variable name - ANT_HOME
Variable value - C:\apache-ant-1.6.5
Next click on the Path variable and add the following to the start of the path. If you already
have ant installed remove the reference to the old bin directory.
Document Release Information
Information Security Level 1 – Confidential 31 Proprietary and Confidential Information of Amdocs
C:\apache-ant-1.6.5\bin;
If a JAVA_HOME is not already set, in the System variables box click new and enter the
following to create the java home.
Variable name - JAVA_HOME
Variable value - C:\bea\jdk160_11
To check this has worked, open a cmd prompt and enter 'ant -version'. This should output
'Apache Ant version 1.6.5 compiled on June 2 2005' to show that Ant is now working.
You are now ready to install the OSS demo.
OSS 7.5 Demo Prerequisites Demonstration Script
32 Information Security Level 1 – Confidential
Proprietary and Confidential Information of Amdocs
9 Keeping 7.5.2 OSS Demos
As long as the Oracle base directory has been selected correctly as per Chapter 2, it is
possible to continue to run the OSS 7.5.2 demonstrations environments. This should only be
necessary if changes or enhancements have been made since their installation.
To do this, the 10g entries must be added to the 11g tnsnames file, so that the 10g database
can still be accessed by the 7.5.2 applications servers.
Using a text editor e.g. notepad, open the tnsnames file located within the 11g oracle
installation. If the instructions within Chapter 2 have been followed, this will be:
C:\oracle\products\11.1.0\NETWORK\ADMIN\tnsnames.ora
Then add the following entries to the bottom of the file, save and exit.
DEMO752 =
(DESCRIPTION =
(address = (protocol = tcp)(host = localhost)(port = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = DEMO752)
)
)
PE752 =
(DESCRIPTION =
(address = (protocol = tcp)(host = localhost)(port = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = PE752)
)
)
CFG752 =
(DESCRIPTION =
(address = (protocol = tcp)(host = localhost)(port = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = CFG752)
)
)
No changes are necessary to the Weblogic server and domains as these are installed within
different directories.
Document Release Information
Information Security Level 1 – Confidential 33 Proprietary and Confidential Information of Amdocs
Document Release Information
Release Editor Edited Date
Comments Sent to Site Approved By Doc Version
6.1.1 Marcel
Read
26th
February
07
All (reformatted)
6.2 Marcel
Read
3rd May
07
6.3 Ian
Jefferyes
6th
November
07
Updated for Cramer6
Release 3
6.4 Ian
Jefferyes
11th June
08
Updated for Cramer6
Release 4
7.5.1 Ian
Jefferyes
18th
August 08
Updated for OSS7.5
7.5.2 Darren
Cook
9th Dec 09 Updated for OSS7.5.2
8.0.0 Darren
Cook
7th Jan 11 Updated for OSS8.
Added sections for
Oracle 11g and Weblogic
10.3. Removed sections
for older versions of
Oracle and Weblogic.
8.0.0 Marcel
Read
1st June
11
Updated to include
changes for Windows 7