oshpd preapproval of manufacturer's · pdf filecover page p i index page p ii...
TRANSCRIPT
OFFICE OF STATEWIDE HEALTH PLANNING AND DEVELOPMENT FACILITIES DEVELOPMENT DIVISION
“Access to Safe, Quality Healthcare Environments that Meet California’s Diverse and Dynamic Needs”
STATE OF CALIFORNIA – HEALTH AND HUMAN SERVICES AGENCY OSH-FD-700 (REV 5/30/13) Page 1 of 2
APPLICATION FOR OSHPD PREAPPROVAL OF MANUFACTURER’S CERTIFICATION (OPM)
OFFICE USE ONLY
APPLICATION #: OPM-0088-13 OSHPD Preapproval of Manufacturer’s Certification (OPM)
Type: New Renewal Update to Pre-CBC 2013 OPA Number:
Manufacturer Information
Manufacturer: STERIS
Manufacturer’s Technical Representative: Zach Miday
Mailing Address: STERIS Corporation, 5900 Heisley Rd, Mentor, Ohio 44060
Telephone: 440-392-7688 Email: [email protected]
Product Information
Product Name: STERIS AMSCO 400 SMALL, CENTURY AND LAB – 16” AND 20” STERILIZERS
Product Type: Steam Sterilizer
Product Model Number: STERIS AMSCO 400 16” and 20”, Century 16” and 20”, Lab 110 and Lab 250
General Description: The STERIS steam sterilizers are designed for fast, efficient sterilization of surgical instruments, utensils, fabrics, and liquids used in medical applications in the Healthcare industry. Configurations allow for increased access to the chamber or an attached steam generator.
Applicant Information
Applicant Company Name: ISAT Seismic Bracing
Contact Person: William V Joerger
Mailing Address: 1020 Crews Road, Suite Q, Matthews NC 28105
Telephone: 510-714-0216 Email: [email protected]
I hereby agree to reimburse the Office of Statewide Health Planning and Development review fees in accordance with the California Administrative Code, 2013.
Signature of Applicant:
Date: October 21, 2014
Title: Principal Structural Engineer Company Name: ISAT Seismic Bracing
William Staehlin
OPM-0088-13
02/19/2015
02/19/2015 OPM-0088-13: Reviewed for Code Compliance by William Staehlin Page 1 of 15
OFFICE OF STATEWIDE HEALTH PLANNING AND DEVELOPMENT FACILITIES DEVELOPMENT DIVISION
“Access to Safe, Quality Healthcare Environments that Meet California’s Diverse and Dynamic Needs”
Registered Design Professional Preparing Engineering Recommendations
Company Name:
ISAT Seismic Bracing
Name: William V Joerger California License Number: S4545
Mailing Address: 1020 Crews Rd, Matthews NC 28105
Telephone: 510-714-0216 Email: [email protected]
OSHPD Special Seismic Certification Preapproval (OSP)
Special Seismic Certification is preapproved under OSP- (Separate application for OSP is required)
Special Seismic Certification is no preapproved
Certification Method(s)
Testing in accordance with: ICC-ES AC156 FM 1950-10
Other* (Please Specify):
Equipment is considered to be rugged. OPM is for anchorage to concrete slabs.
*Use of criteria other than those adopted by the California Building Standards Code, 2013 (CBSC 2013) for component supports and attachments are not permitted. For distribution system, interior partition wall, and suspended ceiling seismic bracings, test criteria other than those adopted in the CBSC 2013 may be used when approved by OSHPD prior to testing.
Analysis
Experience Data
Combination of Testing, Analysis, and/or Experience Data (Please Specify):
List of Attachments Supporting the Manufacturer’s Certification
Test Report Drawings Calculations Manufacturer’s Catalog
Other(s) (Please Specify):
OFFICE USE ONLY – OSHPD APPROVAL VALID FOR CBC 2013 ONLY
Signature: Date: 02/19/2015
Print Name: William Staehlin
Title: SSE
Condition of Approval (if applicable):
STATE OF CALIFORNIA – HEALTH AND HUMAN SERVICES AGENCY OSH-FD-700 (REV 5/30/13) Page 2 of 2
William Staehlin
OPM-0088-13
02/19/2015
02/19/2015 OPM-0088-13: Reviewed for Code Compliance by William Staehlin Page 2 of 15
FILE NO.: CLT-0314-037 to 040 “Empowered by Experience” REV 6
Submittal Documents
OSHPD OPM-0088-13
SUPPORT AND ATTACHMENT OPM DRAWINGS
AMSCO 400 SMALL
CENTURY 16” AND CENTURY 20” LAB 110 AND LAB 250
STERILIZERS - 16” x 16” AND 20” x 20”
STERIS
ISAT
1020 Crews Road Suite Q Matthews, N.C. 28105
704-841-4080
6
William Staehlin
OPM-0088-13
02/19/2015
02/19/2015 OPM-0088-13: Reviewed for Code Compliance by William Staehlin Page 3 of 15
FILE NO.: CLT-0314-037 to 040 “Empowered by Experience” Index Rev 2
OSHPD OPM-0088-13
CONSTRUCTION DRAWING INDEX DRAWING INDEX Cover Page p i Index Page p ii Construction Drawings for OPM-0088-13 AMSCO 400 Small, Century and Lab Equipment
Slab-On-Grade Notes p 1 AMSCO 400 Small 16”, Century 16” and Lab 110
Attachment Layout for Slab-On-Grade p 2 AMSCO 400 Small 20”, Century 20” and Lab 250
Attachment Layout for Slab-On-Grade p 3 AMSCO 400 Small, Century and Lab Elevated Slab Notes p 4
AMSCO 400 Small 16”, Century 16” and Lab 110 Attachment Layout for Elevated Slab p 5
AMSCO 400 Small 20”, Century 20” and Lab 250 Attachment Layout for Elevated Slab p 6
AMSCO 400 Small, Century and Lab Attachment Notes p 7 AMSCO 400 Small Attachment Forces p 8 AMSCO 400 Small, Century and Lab Equipment Support Detail p 9
AMSCO 400 Small, Century and Lab Supplemental Steel for Elevated Slab p 10
Century and Lab Attachment Forces p 11
William Staehlin
OPM-0088-13
02/19/2015
02/19/2015 OPM-0088-13: Reviewed for Code Compliance by William Staehlin Page 4 of 15
6
William Staehlin
OPM-0088-13
02/19/2015
02/19/2015 OPM-0088-13: Reviewed for Code Compliance by William Staehlin Page 5 of 15
CG
H
EIG
HT
6" MIN.
TABULATED
LENGTH
SIDE-TO-SIDE
TA
BU
LA
TE
D
WID
TH
FR
ON
T-T
O-B
AC
K
10" MINIMUM
EDGE DISTANCE
ex
ey
6"
10" MINIMUM
EDGE DISTANCE
6
William Staehlin
OPM-0088-13
02/19/2015
02/19/2015 OPM-0088-13: Reviewed for Code Compliance by William Staehlin Page 6 of 15
CG
H
EIG
HT
6" MIN.
TABULATED
LENGTH
SIDE-TO-SIDE
TA
BU
LA
TE
D
WID
TH
FR
ON
T-T
O-B
AC
K
10" MINIMUM
EDGE DISTANCE
ex
ey
6 3/4"
6 3/4"
10" MINIMUM
EDGE DISTANCE
6
William Staehlin
OPM-0088-13
02/19/2015
02/19/2015 OPM-0088-13: Reviewed for Code Compliance by William Staehlin Page 7 of 15
6
William Staehlin
OPM-0088-13
02/19/2015
02/19/2015 OPM-0088-13: Reviewed for Code Compliance by William Staehlin Page 8 of 15
CG
H
EIG
HT
TABULATED
LENGTH
SIDE-TO-SIDE
TA
BU
LA
TE
D
WID
TH
FR
ON
T-T
O-B
AC
K
10" MINIMUM
EDGE DISTANCE
ex
ey
10" MINIMUM
EDGE DISTANCE
6
William Staehlin
OPM-0088-13
02/19/2015
02/19/2015 OPM-0088-13: Reviewed for Code Compliance by William Staehlin Page 9 of 15
CG
H
EIG
HT
TABULATED
LENGTH
SIDE-TO-SIDE
TA
BU
LA
TE
D
WID
TH
FR
ON
T-T
O-B
AC
K
10" MINIMUM
EDGE DISTANCE
ex
ey
10" MINIMUM
EDGE DISTANCE
6
William Staehlin
OPM-0088-13
02/19/2015
02/19/2015 OPM-0088-13: Reviewed for Code Compliance by William Staehlin Page 10 of 15
6
William Staehlin
OPM-0088-13
02/19/2015
02/19/2015 OPM-0088-13: Reviewed for Code Compliance by William Staehlin Page 11 of 15
6
William Staehlin
OPM-0088-13
02/19/2015
02/19/2015 OPM-0088-13: Reviewed for Code Compliance by William Staehlin Page 12 of 15
1 5/32"
3 13/32" F
OR
16"
3 1/4" F
OR
20"
3" 8 17/32"
3 3/8" 3 3/8"57/64"
2"
2 3/4" 3 1/4"
4 17/32"
3/4" TYP.3/4" TYP.
3 13/32"4"
4"
6
William Staehlin
OPM-0088-13
02/19/2015
02/19/2015 OPM-0088-13: Reviewed for Code Compliance by William Staehlin Page 13 of 15
4 1/2" MIN.
3 1/4" NWC OR SAND LWC
CONCRETE f'c = 3000 psi MIN.
3" M
AX
.
1" MAX. OFFSET
ON EITHER SIDE OF CENTER
12" TYP.
10" MIN.
EDGE DIST.
1" MIN. TYP.
4" MIN.
THICKNESS
3000 psiI MIN.
6
William Staehlin
OPM-0088-13
02/19/2015
02/19/2015 OPM-0088-13: Reviewed for Code Compliance by William Staehlin Page 14 of 15
6
William Staehlin
OPM-0088-13
02/19/2015
02/19/2015 OPM-0088-13: Reviewed for Code Compliance by William Staehlin Page 15 of 15