Smart questionsSmart answersSmart people

Go Find A Forum Go

JoinDirectorySearchTell A FriendWhitepapersJobs

Home > Forums > Engineering Codes, Standards & Certifications > Engineering Codes, Standards & Certifications > OSHA (occupational safety) CodeIssues Forum

OSHA Surface Temp thread190-79451

dhoxworth (Mechanical) 21Nov03

15:13

Can anyone direct me to the appropriate OSHA section for surface temperature requirements? Thanks!

jsummerfield (Electrical) 23Nov03

22:28

Help with other specifics regarding what you really want to know. Are you addressing insulation for personnel protection, explosion prevention, ...

You can also check 29 CFR 1910 at http://www.access.gpo.gov/nara/cfr/waisidx_01/29cfr1910...

John

dhoxworth (Mechanical) 24Nov03

10:54

It's surface temperature requirements for equipment to protect the workers. I wondered what code/standard governs those limits. Thanks!

RPG (Chemical) 24Nov03

17:40

I do not believe that OSHA has a limit on temperature for exposed surfaces. The general duty clause requires that you must protect your employeesfrom receiving a burn as a result of touching a hot surface. A generally accepted temperature is 140 degrees F as a maximum temperature for exposedsurfaces where an employee could be expected to come into contact with it. Some safety supply companies sell stick on warning labels, made oftemperature sensing materials, that turn to a red color to warn employees of excessive temperatures.

dhoxworth (Mechanical) 24Nov03

17:43

But where does this 140 degrees F number come from? is it a regulation or just a common practice (that is not really regulated)?

Read More Threads Like This One

RPG (Chemical) 24Nov03

17:43

One more item on this subject. You do not have to insulate the hot surface. An alternate is to provide barriers to prevent incidental employeecontact. May times hot surfaces are inevitable and employees must wear appropriate PPE to protect themselves when in proximity to these surfaces.

RPG (Chemical) 24Nov03

17:45

~140 degrees F is a temperature that many Industrial Hygenists have determined that an employee can have incidental contact with a surface and not beburned.

jsummerfield (Electrical) 27Nov03

9:59

I do not know of the OSHA requirements. The temperature appears to differ depending upon the time of exposure and heat conductivity. For example, Ithink that we require piping insulation for personnel protection about 150 degree F, perhaps it is 140 F. However, I think that the plumbing industry limitis about 120 degree F (or 45 degree C) for hot-water heaters and bath water temperature controls. The exposure time limit decreases somewhatexponentially with increasing temperature.

John

(Mechanical) 20Aug04

18:35

ASTM C1055-03 has the pertinent information about burn protection. This standard is referenced in web pagehttp://www.osha.gov/pls/oshaweb/owadisp.show_document?p_table=INTERPRETATIONS&p_id=22617 see the writeup under the 9th paragraph "Section 5(a)(1) of the OSHAct:"

safetydan (Industrial) 1 Dec04

11:26

There is not a magic number for the requirements of surface temperatures. You basically have to provide protection under the general duty clausebecause you simply can't state an absolute temperature for every individual situation. There is not simply a way of stating that 120 F as the limit towhere the human body can accept the transfer of heat, people in AZ would be in real trouble. However, general wisdom would tell someone that a stripof steel at 1000 F is a bit too hot to touch without proper protection.

You will need to look at your particular situation and determine what the risks are to your employees. In my professional opinion, anything over 150 Fshould not be touched by unprotected human hands. Anything over that, and I would provide first, engineering controls to restrict the access of a personfrom contact with the surface. Second, if access cannot be restricted, limit the access to as little as possible. Lastly, provide PPE(hot mill gloves, armguards, face shields, etc.) to the employees who have no other option but contact with the material.

Join | Jobs | Advertise | About Us | Contact Us | Site Policies

Copyright © 1998-2013 Tecumseh Group, Inc. All rights reserved.Unauthorized reproduction or linking forbidden without express written permission.

Read More Threads Like This One