8/13/2019 osaka_i_e_a4

1/7

Assembly Instructions : Seven A4 sheets (No.1to No.7)

Before starting assembly:Writing the number of eachsection on its back side before cutting out the sections ishighly recommended.(* This way, you can be sure which section is whicheven after cutting out the sections.)

Indicates where sections should be glued together.

Fold in this direction.

Osaka Castle, Japan : Assembly Instructions Canon Inc. PAOPAO. Inc

Assemble the stone wall.

Attach the opposite sidein the same way.

Attach the opposite sidein the same way.

* This model was designed for Papercraft and may differ from the original in some respects.

* Build the model by carefully reading the Assembly Instructions, in the parts sheet page order.

Assembly Instructions

* Hint:Trace along the folds with a ruler and an exhausted pen (no ink) to get a sharper, easier fold.

1

8/13/2019 osaka_i_e_a4

2/7

Osaka Castle, Japan : Assembly Instructions Canon Inc. PAOPAO. Inc

Assemble the first level.

Attach the opposite sidein the same way.

Attach the opposite sidein the same way.

Fold in from the backand glue in place.

Back

Attach the oppositeside in the same way.

Fold in from the back and glue in place.

Attach the opposite side in the same way.

Bottom

Assemble the second level.

8/13/2019 osaka_i_e_a4

3/7

Osaka Castle, Japan : Assembly Instructions Canon Inc. PAOPAO. Inc

Assemble the third level.

Attach the opposite sidein the same way.

Fold in from the backand glue in place.

Attach the opposite sidein the same way.

8/13/2019 osaka_i_e_a4

4/7

Osaka Castle, Japan : Assembly Instructions Canon Inc. PAOPAO. Inc

Assemble the fourth level.

Attach the opposite sidein the same way.

Fold in from the backand glue in place.

Attach the opposite sidein the same way.

8/13/2019 osaka_i_e_a4

5/7

Osaka Castle, Japan : Assembly Instructions Canon Inc. PAOPAO. Inc

Assemble the fifth level.

Attach the opposite side in the same way.

Fold in from the backand glue in place.

Attach the oppositeside in the same way.

Attach the oppositeside in the same way.

Glue this part in placeastride part 33.

Center this part visually

when attaching it in place.

8/13/2019 osaka_i_e_a4

6/7

Osaka Castle, Japan : Assembly Instructions Canon Inc. PAOPAO. Inc

Assemble the base.

Before attaching the parts, draw horizontal and vertical linesintersecting at the center of the bottom sides of parts 35 and 36.

Bottom view

Turn the base over and attach this partin line with the marks you made in step 2.

After gluing part 39 in place, turn the base overso that its top faces up again.

http://w

ww.canon

.com/c-p

ark/en

/

PAOPAO

.Inc

http://w

ww.ca

non.co

m/c- pa

rk/en/

PA

OPAO

. Inc

8/13/2019 osaka_i_e_a4

7/7

Osaka Castle, Japan : Assembly Instructions Canon Inc. PAOPAO. Inc

Assemble the white walls. Finish assembling the entire castle.

* Match the numbers on the marks when gluing these parts in place.

Finished!