ormita 100% barter – pay no cash new ford trucks available on barter
TRANSCRIPT
Ormita
100% Barter – Pay No Cash
New Ford Trucks available on Barter
Trucks on barter
4 Ford new trucks (2008 model)
on barter from Croatia.
The trucks were unsold and remained at the agency .The trucks are new (0 km) and unused.
Now offered on 100% barter.Since the pollution standard changed (to EURO 5) the trucks
must be sold to Africa or Middle East.The prices are about 40% lower then price list.
For any question contact: [email protected]
+972-54-3134676
Ford Cargo 1835T 4x2 HRSC– TractorEURO 4
51,741€
Ford 1835
Specifications (1)Ford 1835 (4x2) HRSC– Tractor
Motor:
Dsl 9 lt. TCI 350 PS- EURO 4 Cabin exterior
Sleeping elevated cabin, mechanical
suspension
Electric adjustable and heated main door
mirrors
Fog lights
Roof and side cabin spoiler
Side chassis spoiler
Cabin interior
Adjustable steering wheel - servo Hema ZF
8098
Seats: driver, air suspension, heated, front
passenger fixed
Driver's seat, lumbar support
ColourCabin colour – black metallicSpoilers in cabin colour
Windows: electric control
Electric remote locking
Radio CD player, MP3
Night cabin air heating (webasto)
Air conditioning
Axels and payload
Front suspension: 7.1 tons, parabolic springs
Rear suspension: 11.5 tons, air suspension
Rear axle – Meritor RS 186 (3.73:1) +
Differential locking
Balance arm, shock absorbers, front and rear
suspension
Tyres and wheels
Front axle 1: 295/80R22.5
Rear axle 1: 295/80R22.5
Spare wheel: 295/80R22.5
Wheels: steel
Driveline
Ford-Ecotorq engine – 9 litres, turbo intercooler –
Bosch Common rail
350 HP at 2400 rpm – 1400 Nm at 1200 – 1700
rpm
Manual transmission ZF, 16 – speed, 16S1620
Dry clutch – single plate – diameter 430 mm
Engine brake (frena) + Thelma retarder
410 x 200 air two circuit brakes – Wedge type
Knorr-Bremse APU, heated air dryer and oil
separator
Braking system
ABS / ASR
Chassis
Wheel base 3800 mm
Chassis profile from high strength steel
– Nubium
Air tanks, steel
Exhaust chamber, left exhaust
Steel fuel tank, 520 lit.
Front submerge protection
Saddle – height 1140 mm
Electric equipment
Alternator 80 Amps – battery 2 x 180 Ah
Legal aspects
Allowed gross vehicle mass – max
18.000 kg
Exhaust emission – Euro 4
Specifications (2)
Ford Cargo 1800 DC-EURO 3
Specifications (1) Ford Cargo 1830 DC
Cabin exterior Daily short cabin Cabin suspension – mechanical springs Headlights for right hand drive Daytime lights Spot headlight adjustable from the cabinColour Cabin colour – orange Chassis colour – black Wheels colour – aluminiumCabin interior Hydraulic power steering – servo Hema ZF 8098 servocom Reach and rake adjustable steering wheel Lower door window Driver's seat, air suspension, electrically heated, adjustable fore/aft, height and seatback angle Driver's seat – adjustable lumbar support Static front passenger seat, adjustable fore/aft and seatback angle
E Stowage above windscreen Trip computer lectric door windows – driver and front passenger Right curb door mirror Wide-angle door mirrors, left and rightElectric, heated door mirrors, driver and front passengerElectric remote locking Radio CD/MP3 playerAir conditioningAxels and payload Front suspension: 7.1 tons, parabolic springs Rear suspension: 11.5 tons, heavy duty multileaf springs Rear axle – Meritor RS 186 Differential ratio: 4.56:1 Differential locking Stabilisers, front and rear suspension Shock absorbers, front and rear suspension
Tyres and wheels
Front axle 1: 12R22.5
Rear axle 1: 12R22.5
Spare wheel: 12R22.5
Wheels: steel
Braking system
Anti-blocking system (ABS)
Traction control (ASR)
Engine brake (frena)
394 x 200 air two circuit brakes – Wedge type
Air dryer – automatic, heated, Rockwell
Duoduplex
Connection for supplying compressed air
Chassis
Wheel base – 4250 mm
Chassis profile from high strength steel – Nubium
Air tanks, steel
Air intake above and behind cabin, dry air filter
Exhaust chamber, left exhaust
Steel fuel tank, 315 lit.
Locking fuel tank cap
Spare wheel
Rear submerge protection
Splash guards
Electric equipment
Alternator 60 Amps – battery 2 x 120 Ah
Legal aspects
Allowed gross vehicle mass – max 18,000 kg
Owner's manual and service booklet in
Croatian
Basic vehicle equipment
Jack, wheel wrench, tyres pressure regulation
hose, safety triangle, first aid kit
Exhaust emission – Euro 3
Guarantee and service
2 years for vehicle without upgrade or max
200.000 km
UPGRADE : Three-side tipper with crane
Specification (2)
Three-side tipper body
Internal body dimensions 4250 x 2380 x 600 mm
Body floor from Hardox 400 4 mm thick material
Body traverses from Domex, Fe 520 material
Higher front side, material Fe 520
Steel sheet sides, reinforced with TR 5 profiles
Auxiliary chassis according to calculation,
material Domex Fe 520
Rear side, upwards opening – downwards
demounting
Sides, downwards opening, from upgraded steel
sheets reinforced with TR 5 profiles
Hydraulic system for tipper and crane with all
necessary valves and cylinder, Benito pump
Oil tank with installed safety filter
Tipper hydraulic system control from the cabin
Locked tool box
Side protection according to CE norm
Auxiliary chassis is protected with two layers of
protection cover and painted in MAN black
Upon a request, the body is sand-blasted,
protected and painted in cabin colour
Driveline
Ford-Ecotorq engine – 7.3 litres, turbo
intercooler – Bosch Common rail
300 HP at 2400 rpm – 1100 Nm at 1440 – 1800
rpm
Coolant radiator, visco ventilator
EDC engine control
Fuel filter and moist separator with automatic
fuel heater
Hydraulic pump capacity: 35 l/min
Work pressure 298 bars
Rotating torque 17.4 kN
Crane control, on both sides from the ground
All cylinders are double-acting
Safety valve for holding the cargo on lifting and
auxiliary cylinder
CE protection
Fixing parts, 6 screws M 24x1000
Specifications (3)
Fourfold hydraulic extension with 4.26 m at 11.86 mHydraulic telescopic stabilisers, width 4.920 mParts for two additional devices, grabber and rotatorPipes from rotator to grabberPipes from crane to rotatorCrane installation behind truck cabin:Making of static chassis calculationMaking of auxiliary chassisReinforcement of auxiliary chassis at crane installation pointCVH attestTIM crane attestNoise protection engine coverSpeed limiter 85 kphManual transmission ZF, 9 – speed, 16S109-1.00Neutral position switchDry clutch – single plate – diameter 395 mmZF PTO – drive from transmission NH1/CESCM – module for engine speed control
Crane
Manufacturer: Ing. Bonfiglioli (It)
Type: P 15000 L / SI
Max. hydraulic reach 11.86 m
Four hydraulic extensions
Cargo lifting at reach of 11.86 m: 880 kg
Cargo lifting at reach of 9.96 m: 1080 kg
Cargo lifting at reach of 8.06 m: 1400 kg
Cargo lifting at reach of 6.16 m: 1960 kg
Cargo lifting at reach of 4.26 m: 3080 kg
Two hydraulic side extendable stabilisers,
extension width max. 4920
Turning angle: 402°
Specifications (4)
Ford Cargo 1800 DC EURO 3
45,794€
Specifications (1)
Cabin exterior
Sleeping elevated cabin, two beds
Electric adjustable and heated main door
mirrors
Height adjustable headlights
Fog lights
Colour
Cabin colour – white
Cabin interior
Adjustable steering wheel - servo Hema
ZF 8098 servocom
Seats: driver, air suspension, heated, front
passenger fixed
Driver's seat, lumbar support
Windows: electric control
Electric remote locking
Radio CD player
Air conditioning
Axels and payload
Front suspension: 7.1 tons, parabolic springs
Rear suspension: 11.5 tons, air suspension
Rear axle – Meritor RS 186 (4.56:1) + Differential
locking
Balance arm, shock absorbers, front and rear
suspension
Tyres and wheels
Front axle 1: 295/80R22.5
Rear axle 1: 295/80R22.5
Spare wheel: 295/80R22.5
Wheels: steel
Specifications (2)Driveline
Ford-Ecotorq engine – 7.3 litres, turbo
intercooler – Bosch Common rail
300 HP at 2400 rpm – 1100 Nm at 1440 – 1800
rpm
Manual transmission ZF, 16 – speed, 9S109-
1.00
Dry clutch – single plate – diameter 395 mm
Braking system
ABS / ASR
Engine brake (frena)
394 x 200 air two circuit brakes – Wedge type
Air dryer – automatic, heated, Rockwell
Duoduplex
Chassis
Wheel base 5500 mm
Chassis profile from high strength steel –
Nubium
Air tanks, steel
Exhaust chamber, left exhaust
Steel fuel tank, 315 lit.
Spare wheel bracket on the side
Front submerge protection
Electric equipment
Alternator 60 Amps – battery 2 x 120 Ah
Legal aspects
Allowed gross vehicle mass – max 17.100
kg
Net payload – 8.900 kg
Exhaust emission – Euro 3
Guarantee and service
2 years for vehicle without upgrade or max
200.000 km
UPGRADE : Cargo body with
tarpaulin
Internal body dimensions 7300 x
2480 x 2500 mm
Aluminium sides, height 600 mm,
three-part
Slide tarpaulin with sides
Fixed roof
Side signalisation lights
Side submerge protection
PVC splash guards and tool box
Cargo floor tie down hooks, 6+6 pcs.
Waterproof plywood floor 24 mm
Material: steel painted in requested
colour
CVH attest
Specifications (3)
Ford Cargo 1830 DC 4x2 – ChassisEURO 3
35,830€
Ford Cargo 1830 DC 4x2 – Chassis
Vehicle technical specification- Ford Cargo 1830 DC 4x2 – Chassis
Cabin exterior
Daily short cabin, mechanical
suspension
Electric adjustable and heated main
door mirrors
Height adjustable headlights
Colour
Cabin colour – white
Cabin interior
Adjustable steering wheel - servo
Hema ZF 8098 servocom
Seats: driver, air suspension, heated,
front passenger fixed
Driver's seat, lumbar support
Windows: electric control
Air conditioningElectric remote locking
Radio CD player
Axels and payload
Front suspension: 7.1 tons, parabolic springs
Rear suspension: 11.5 tons, heavy duty multileaf
springs
Rear axle – Meritor RS 186 (4.56:1) + Differential
locking
Balance arm, shock absorbers, front and rear
suspension
Tyres and wheels
Front axle 1: 12R22.5
Rear axle 1: 12R22.5
Spare wheel: 12R22.5
Wheels: steel
Specification (2)
Driveline
Ford-Ecotorq engine – 7.3 litres, turbo
intercooler – Bosch Common rail
300 HP at 2400 rpm – 1100 Nm at
1440 – 1800 rpm
Manual transmission ZF, 9 – speed,
9S109-1.00
Dry clutch – single plate – diameter 395
mm
Braking system
ABS / ASR
Engine brake (frena)
394 x 200 air two circuit brakes –
Wedge type
Air dryer – automatic, heated, Rockwell
Duoduplex
Chassis
Wheel base 4750 mm
Chassis profile from high strength steel – Nubium
Air tanks, steel
Exhaust chamber, left exhaust
Steel fuel tank, 315 lit.
Spare wheel bracket on the side
Front submerge protection
Electric equipment
Alternator 60 Amps – battery 2 x 120 Ah
Legal aspects
Allowed gross vehicle mass – max 17.000 kg
Exhaust emission – Euro 3