origami 6030 - bainultra.com · 1 800 463.2187 from 8 a.m. to 8 p.m. monday to thursday (est)...
TRANSCRIPT
www.bainultra.com
1 800 463.2187 From 8 a.m. to 8 p.m. Monday to Thursday (EST) [email protected] From 8 a.m. to 5 p.m. on Friday (EST)
THERMOMASSEUR ® BATH $
TUB $
OPTIONAL UPCHARGE APPLICABLE
COLOR
Standard
White Biscuit
Optional
Gray
$
FINISH
UltraVelour Matte Finish (White Only) $
CONTROL (TMU ONLY)
MiaMulti ® $
THERMOMASSEUR (TMU)
Jets 40
1 heated backrest included
MiaPlus® Control included
Geysair® included
AromaCloud® $
Illuzio Chromatherapy NEW $
PRODUCT SHEET
ORIGAMI 6030 ORIGINAL SERIES 60” X 30” X 21”
TILE FLANGE (specify right or left)
Ordered with bath, uninstalled $
Factory-installed $
SKIRT MULTIFIT SJ-1
Skirt $ $
Optional color $ $
FEATURES
Installation types Drop-in, Alcove (3 walls) & Undermount
No. of bathers Imp. gallons 38
US gallons 46
WASTE & OVERFLOW 16” x 35” INTEGRATED WASTE & OVERFLOW
White, Biscuit $ $
Chrome $ $
Brass $ $
Brushed & Polished nickel $ $
Oil-rubbed bronze $ N/A
TUB (soaker)
AromaCloud® $
Illuzio Chromatherapy NEW $
WarmTouchShell® $
DOT control included with therapy
Co
pyri
ght
© M
arch
20
18 B
ain
Ult
ra In
c. A
ll ri
ghts
res
erve
d.
The specifications shown indicate the outer edge dimension and the inside bathing capacity dimension measured at air jets’ height. The manufacturer accepts a 1/4” [0.64 cm] variance. There are variations on each product and specifications are subject to change as we improve upon our product as required. The dimensions needed for site preparation and structure building will differ. BainUltra ® assumes no responsibility for preparatory work done prior to the product being on site.
ORIGAMI 6030 ORIGINAL SERIES 60” X 30” X 21”
ACCESSORIES (OPTIONAL)
Hot water supply required Should be 70% of water capacity of tub or greater.
Turbine
Access to the pump must be at least 18” X 22”. Standard connection is 20 A. 120 V, 60 hz, dedicated line with a Ground-Fault Circuit Interrupter (GFCI). For any additional option, a second line is needed 15 A. 120 V, 60 hz, dedicated line with a GFCI. Air vent necessary: 2” X 4” minimum
Our products must be installed by certified professionals only and according to our Owner’s Manual as well as federal, provincial/state and local building codes and regulations (www.bainultra.com/documentation/documentation).
WARRANTY
* Some restrictions apply | www.bainultra.com/warranty
Approx. shipping weight 128 lbs
Turbine power 550 W
Air heater 600 W
Controls–LED–Geysair* 5 years
Bath & turbine* 20 years
CUTTING TEMPLATE # 90000048
AromaCloud position Heated backrest (TMU)
Control position when factory-installed (Mia or Dot) WarmTouchShell position
Turbine position (TMU)
When tiling flange is added, the AromaCloud will automatically be installed on the opposite side of the flange.
LETTER DESCRIPTION MEASURE
A Outside edge to center drain 11”
B Outside edge to overflow 3 5/8”
C Total length 60”
D Total width 30”
E Bathing well length 43 1/4”
F Bathing well width 19 5/8”
G Deck width 3 1/4”
H Deck width 3 1/4”
I Height from bottom of tub to top deck 21”
J Height from bottom of tub to bottom of lip 19”
K Height from drain to center of overflow 15 1/2”
L Maximum water level 13 7/8”
M Slope of backrest 24°
TECHNICAL SPECIFICATIONS
F
E
I
C H G
D
J M LK
B
A
6030
F
E
I
C H G
D
J M LK
B
A
6030
F
E
I
C H G
D
J M LK
B
A
6030
OTHER Optional tile flange (specify right or left).
TOTAL PRICE $
ALCOVE / DROP-IN / UNDERMOUNT INSTALLATION
www.bainultra.com
1 800 463.2187 From 8 a.m. to 8 p.m. Monday to Thursday (EST) [email protected] From 8 a.m. to 5 p.m. on Friday (EST)
OPTIONAL UPCHARGE APPLICABLE
COLOR
Standard
White Biscuit
Optional
Gray
$
FINISH
UltraVelour Matte Finish (White Only) $
CONTROL (TMU ONLY)
MiaMulti ® $
THERMOMASSEUR (TMU)
Jets 38
1 heated backrest included
MiaPlus® Control included
Geysair® included
AromaCloud® $
Illuzio Chromatherapy NEW $
PRODUCT SHEET
ORIGAMI 6032 ORIGINAL SERIES 60” X 32” X 21”
SKIRT (2” LIP ONLY) MULTIFIT SJ-1
Skirt $ $
Optional color $ $
TILE FLANGE WITH 2” LIP ONLY (specify right or left)
Ordered with bath, uninstalled $
Factory-installed $
Slim Deck 1/2"
FEATURES
Installation typesDrop-in: 1/2”, 2” et 3 1/4”
Undermount & Alcove (3 walls): 2”
No. of bathers Imp. gallons 40
US gallons 48
WASTE & OVERFLOW 16” x 35” INTEGRATED WASTE & OVERFLOW
White, Biscuit $ $
Chrome $ $
Brass $ $
Brushed & Polished nickel $ $
Oil-rubbed bronze $ N/A
THERMOMASSEUR ® BATH $
TUB $
TUB (soaker)
AromaCloud® $
Illuzio Chromatherapy NEW $
WarmTouchShell® $
DOT control included with therapy
DON’T FORGET TO INDICATE THE DECK HEIGHT (1/2”, 2” OR 3 1/4”). SLIM DECK ARE AVAILABLE FOR DROP-IN INSTALLATION ONLY.
Co
pyri
ght
© M
arch
20
18 B
ain
Ult
ra In
c. A
ll ri
ghts
res
erve
d.
The specifications shown indicate the outer edge dimension and the inside bathing capacity dimension measured at air jets’ height. The manufacturer accepts a 1/4” [0.64 cm] variance. There are variations on each product and specifications are subject to change as we improve upon our product as required. The dimensions needed for site preparation and structure building will differ. BainUltra ® assumes no responsibility for preparatory work done prior to the product being on site.
ORIGAMI 6032 ORIGINAL SERIES 60” X 32” X 21”
ACCESSORIES (OPTIONAL)
Hot water supply required Should be 70% of water capacity of tub or greater.
Turbine
Access to the pump must be at least 18” X 22”. Standard connection is 20 A. 120 V, 60 hz, dedicated line with a Ground-Fault Circuit Interrupter (GFCI). For any additional option, a second line is needed 15 A. 120 V, 60 hz, dedicated line with a GFCI. Air vent necessary: 2” X 4” minimum
Our products must be installed by certified professionals only and according to our Owner’s Manual as well as federal, provincial/state and local building codes and regulations (www.bainultra.com/documentation/documentation).
WARRANTY
* Some restrictions apply | www.bainultra.com/warranty
Approx. shipping weight 130 lbs
Turbine power 550 W
Air heater 600 W
Controls–LED–Geysair* 5 years
Bath & turbine* 20 years
CUTTING TEMPLATE # 90000048
AromaCloud position Heated backrest (TMU)
Control position when factory-installed (Mia or Dot) WarmTouchShell position
Turbine position (TMU)
When tiling flange is added, the AromaCloud will automatically be installed on the opposite side of the flange.
LETTER DESCRIPTION MEASURE
A Outside edge to center drain 11 5/8”
B Outside edge to overflow 4 1/4”
C Total length (with 1/2” deck height) 59 3/4” Total length (with 2” deck height) 60” Total length (with 3 1/4” deck height) 60 1/4”
D Total width (with 1/2” deck height) 31 5/8” Total width (with 2” deck height) 31 7/8” Total width (with 3 1/4” deck height) 32 1/8”
E Bathing well length 42 5/8”
F Bathing well width 20 3/8”
G Deck width 3 5/8”
H Deck width at drain end 3 7/8”
I Height from bottom of tub to top deck 21”
J Height from bottom of lip to top deck 2”
K Height from bottom of lip to top deck 3 1/4”
L Height from drain to center of overflow 16 1/8”
M Maximum water level 14 1/4”
N Slope of backrest 24°
O Height from bottom of lip to top deck 1/2”
TECHNICAL SPECIFICATIONS
OTHER Optional tile flange with 2” lip height only (specify right or left).
TOTAL PRICE $
ALCOVE / DROP-IN / UNDERMOUNT INSTALLATION
E
C H
K
M
I
F D
G
N
B
A
J O
L
6032
E
C H
K
M
I
F D
G
N
B
A
J O
L
6032
E
C H
K
M
I
F D
G
N
B
A
J O
L
6032
www.bainultra.com
1 800 463.2187 From 8 a.m. to 8 p.m. Monday to Thursday (EST) [email protected] From 8 a.m. to 5 p.m. on Friday (EST)
THERMOMASSEUR (TMU)
Jets 45
1 heated backrest included
MiaPlus® Control included
Geysair® included
AromaCloud® $
Illuzio Chromatherapy NEW $
PRODUCT SHEET
ORIGAMI 6632 ORIGINAL SERIES 66” X 32” X 21”
Slim Deck 1/2"
OPTIONAL UPCHARGE APPLICABLE
COLOR
Standard
White Biscuit
Optional
Gray
$
FINISH
UltraVelour Matte Finish (White Only) $
CONTROL (TMU ONLY)
MiaMulti ® $
SKIRT (2” LIP ONLY) MULTIFIT SJ-1
Skirt $ $
Optional color $ $
FEATURES
Installation typesDrop-in: 1/2”, 2” & 3 1/4”
Undermount & Alcove (3 walls): 2”
No. of bathers Imp. gallons 41
US gallons 49
WASTE & OVERFLOW 16” x 35” INTEGRATED WASTE & OVERFLOW
White, Biscuit $ $
Chrome $ $
Brass $ $
Brushed & Polished nickel $ $
Oil-rubbed bronze $ N/A
TILE FLANGE WITH 2” LIP ONLY (specify right or left)
Ordered with bath, uninstalled $
Factory-installed $
THERMOMASSEUR ® BATH $
TUB $
TUB (soaker)
AromaCloud® $
Illuzio Chromatherapy NEW $
WarmTouchShell® $
DOT control included with therapy
DON’T FORGET TO INDICATE THE DECK HEIGHT (1/2”, 2” OR 3 1/4”). SLIM DECK ARE AVAILABLE FOR DROP-IN INSTALLATION ONLY.
Co
pyri
ght
© M
arch
20
18 B
ain
Ult
ra In
c. A
ll ri
ghts
res
erve
d.
The specifications shown indicate the outer edge dimension and the inside bathing capacity dimension measured at air jets’ height. The manufacturer accepts a 1/4” [0.64 cm] variance. There are variations on each product and specifications are subject to change as we improve upon our product as required. The dimensions needed for site preparation and structure building will differ. BainUltra ® assumes no responsibility for preparatory work done prior to the product being on site.
ORIGAMI 6632 ORIGINAL SERIES 66” X 32” X 21”
ACCESSORIES (OPTIONAL)
Hot water supply required Should be 70% of water capacity of tub or greater.
Turbine
Access to the pump must be at least 18” X 22”. Standard connection is 20 A. 120 V, 60 hz, dedicated line with a Ground-Fault Circuit Interrupter (GFCI). For any additional option, a second line is needed 15 A. 120 V, 60 hz, dedicated line with a GFCI. Air vent necessary: 2” X 4” minimum
Our products must be installed by certified professionals only and according to our Owner’s Manual as well as federal, provincial/state and local building codes and regulations (www.bainultra.com/documentation/documentation).
WARRANTY
* Some restrictions apply | www.bainultra.com/warranty
Approx. shipping weight 132 lbs
Turbine power 550 W
Air heater 600 W
Controls–LED–Geysair* 5 years
Bath & turbine* 20 years
CUTTING TEMPLATE # 90000047
AromaCloud position Heated backrest (TMU)
Control position when factory-installed (Mia or Dot) WarmTouchShell position
Turbine position (TMU)
When tiling flange is added, the AromaCloud will automatically be installed on the opposite side of the flange.
LETTER DESCRIPTION MEASURE
A Outside edge to center drain 11 1/4”
B Outside edge to overflow 4 1/8”
C Total length (with 1/2” deck height) 65 5/8” Total length (with 2” deck height) 65 7/8” Total length (with 3 1/4” deck height) 66”
D Total width (with 1/2” deck height) 31 5/8” Total width (with 2” deck height) 31 7/8” Total width (with 3 1/4” deck height) 32”
E Bathing well length 49 1/2”
F Bathing well width 20 7/8”
G Deck width 3 5/8”
H Deck width 3 5/8”
I Height from bottom of tub to top deck 21”
J Height from bottom of lip to top deck 2”
K Height from bottom of lip to top deck 3 1/4”
L Height from drain to center of overflow 15 1/2”
M Maximum water level 13 7/8”
N Slope of backrest 24°
O Height from bottom of lip to top deck 1/2”
TECHNICAL SPECIFICATIONS
OTHER Optional tile flange with 2” lip height only (specify right or left).
TOTAL PRICE $
ALCOVE / DROP-IN / UNDERMOUNT INSTALLATION
6632
K
M
J
L
A B
F D
G
H
E
C
I N
O
6632
K
M
J
L
A B
F D
G
H
E
C
I N
O
6632
K
M
J
L
A B
F D
G
H
E
C
I N
O
www.bainultra.com
1 800 463.2187 From 8 a.m. to 8 p.m. Monday to Thursday (EST) [email protected] From 8 a.m. to 5 p.m. on Friday (EST)
THERMOMASSEUR (TMU)
Jets 40
1 heated backrest included
MiaPlus® Control included
Geysair® included
AromaCloud® $
Illuzio Chromatherapy NEW $
PRODUCT SHEET
ORIGAMI 6636 ORIGINAL SERIES 66” X 36” X 22”
Slim Deck 1/2"Standard Deck 4 in
OPTIONAL UPCHARGE APPLICABLE
COLOR
Standard
White Biscuit
Optional
Gray
$
FINISH
UltraVelour Matte Finish (White Only) $
CONTROL (TMU ONLY)
MiaMulti ® $
SKIRT (2” LIP ONLY) MULTIFIT SJ-1
Skirt $ $
Optional color $ $
FEATURES
Installation typesDrop-in: 1/2”, 2” & 4”
Undermount & Alcove ( 3 murs): 2”
No. of bathers Imp. gallons 52
US gallons 62
WASTE & OVERFLOW 16” x 35” INTEGRATED WASTE & OVERFLOW
White, Biscuit $ $
Chrome $ $
Brass $ $
Brushed & Polished nickel $ $
Oil-rubbed bronze $ N/A
TILE FLANGE WITH 2” LIP ONLY (specify right or left)
Ordered with bath, uninstalled $
Factory-installed $
THERMOMASSEUR ® BATH $
TUB $
TUB (soaker)
AromaCloud® $
Illuzio Chromatherapy NEW $
WarmTouchShell® $
DOT control included with therapy
DON’T FORGET TO INDICATE THE DECK HEIGHT (1/2”, 2’’ OR 4’’). SPECIFY WASTE POSITION. SLIM DECK ARE AVAILABLE FOR DROP-IN INSTALLATION ONLY.
Co
pyri
ght
© M
arch
20
18 B
ain
Ult
ra In
c. A
ll ri
ghts
res
erve
d.
The specifications shown indicate the outer edge dimension and the inside bathing capacity dimension measured at air jets’ height. The manufacturer accepts a 1/4” [0.64 cm] variance. There are variations on each product and specifications are subject to change as we improve upon our product as required. The dimensions needed for site preparation and structure building will differ. BainUltra ® assumes no responsibility for preparatory work done prior to the product being on site.
ORIGAMI 6636 ORIGINAL SERIES 66” X 36” X 22”
ACCESSORIES (OPTIONAL)
Hot water supply required Should be 70% of water capacity of tub or greater.
Turbine
Access to the pump must be at least 18” X 22”. Standard connection is 20 A. 120 V, 60 hz, dedicated line with a Ground-Fault Circuit Interrupter (GFCI). For any additional option, a second line is needed 15 A. 120 V, 60 hz, dedicated line with a GFCI. Air vent necessary: 2” X 4” minimum
Our products must be installed by certified professionals only and according to our Owner’s Manual as well as federal, provincial/state and local building codes and regulations (www.bainultra.com/documentation/documentation).
WARRANTY
* Some restrictions apply | www.bainultra.com/warranty
Approx. shipping weight 135 lbs
Turbine power 550 W
Air heater 600 W
Controls–LED–Geysair* 5 years
Bath & turbine* 20 years
CUTTING TEMPLATE # 90000047
AromaCloud position Heated backrest (TMU)
Control position when factory-installed (Mia or Dot) WarmTouchShell position
Turbine position (TMU)
When tiling flange is added, the AromaCloud will automatically be installed on the opposite side of the flange.
LETTER DESCRIPTION MEASURE
A Outside edge to center drain 12 3/8”
B Outside edge to overflow 4 5/8”
C Total length (with 1/2” deck height) 65 5/8” Total length (with 2” deck height) 65 7/8” Total length (with 4” deck height) 66 1/4”
D Total width (with 1/2” deck height) 35 1/2” Total width (with 2” deck height) 35 3/4” Total width (with 4” deck height) 36 1/8”
E Bathing well length 47 1/4”
F Bathing well width 22 1/4”
G Deck width 4 1/2”
H Deck width at waste end 4 1/2”
I Deck width at backrest end 1 5/8”
J Height from bottom of tub to top deck 21 7/8”
K Height from bottom of lip to top deck 2”
L Height from bottom of lip to top deck 4”
M Height from drain to center of overflow 17 1/8”
N Maximum water level 15 1/2”
O Slope of backrest 24°
P Height from bottom of lip to top deck 1/2”
TECHNICAL SPECIFICATIONS
OTHER Optional tile flange with 2” lip height only (specify right or left).
F D
G
MN
E
CH
L
OJ
BI A
K
6636
P
F D
G
MN
E
CH
L
OJ
BI A
K
6636
P
F D
G
MN
E
CH
L
OJ
BI A
K
6636
P
TOTAL PRICE $
ALCOVE / DROP-IN / UNDERMOUNT INSTALLATION
www.bainultra.com
1 800 463.2187 From 8 a.m. to 8 p.m. Monday to Thursday (EST) [email protected] From 8 a.m. to 5 p.m. on Friday (EST)
OPTIONAL UPCHARGE APPLICABLE
COLOR
Standard
White Biscuit
Optional
Gray
$
FINISH
UltraVelour Matte Finish (White Only) $
CONTROL (TMU ONLY)
MiaMulti ® $
INTEGRATED WASTE & OVERFLOW
White $
Biscuit $
Chrome $
Brass $
Brushed & Polished nickel $
THERMOMASSEUR (TMU)
Jets 42
1 heated backrest included
MiaPlus® Control included
Geysair® included
AromaCloud® $
Illuzio Chromatherapy NEW $
PRODUCT SHEET
ORIGAMI 6838 DESIGN SERIES (FREESTANDING) 68” X 38” X 22”
FEATURES
Installation type Freestanding
No. of bathers Imp. gallons 43
US gallons 52 Waste & overflow (16x35) inst. & incl.
FREESTANDING
THERMOMASSEUR ® BATH $
TUB $
TUB (soaker)
AromaCloud® $
Illuzio Chromatherapy NEW $
WarmTouchShell® $
DOT control included with therapy
DON’T FORGET TO SPECIFY THE FINISH OF THE WASTE & OVERFLOW.
Co
pyri
ght
© M
arch
20
18 B
ain
Ult
ra In
c. A
ll ri
ghts
res
erve
d.
The specifications shown indicate the outer edge dimension and the inside bathing capacity dimension measured at air jets’ height. The manufacturer accepts a 1/4” [0.64 cm] variance. There are variations on each product and specifications are subject to change as we improve upon our product as required. The dimensions needed for site preparation and structure building will differ. BainUltra ® assumes no responsibility for preparatory work done prior to the product being on site.
ORIGAMI 6838 DESIGN SERIES (FREESTANDING) 68” X 38” X 22”
ACCESSORIES (OPTIONAL)
Hot water supply required Should be 70% of water capacity of tub or greater.
Turbine
Access to the pump must be at least 18” X 22”. Standard connection is 20 A. 120 V, 60 hz, dedicated line with a Ground-Fault Circuit Interrupter (GFCI). For any additional option, a second line is needed 15 A. 120 V, 60 hz, dedicated line with a GFCI. Air vent necessary: 2” X 4” minimum
Our products must be installed by certified professionals only and according to our Owner’s Manual as well as federal, provincial/state and local building codes and regulations (www.bainultra.com/documentation/documentation).
WARRANTY
* Some restrictions apply | www.bainultra.com/warranty
Approx. shipping weight 220 lbs
Turbine power 550 W
Air heater 600 W
Controls–LED–Geysair* 5 years
Bath & turbine* 20 years
CUTTING TEMPLATE # 90000054
AromaCloud position Heated backrest (TMU)
Control position when WarmTouchShell position factory-installed (Mia or Dot)
LETTER DESCRIPTION MEASURE
A Outside edge to center drain 12 3/4”
B Outside edge to overflow 7”
C Total length 68”
D Total width 38”
E Bathing well length 42 1/8”
F Bathing well width 20 3/8”
G Deck width at drain end 6 1/8”
H Deck width at backrest end 4”
I Height from bottom of tub to top deck 22 1/8”
J Height from bottom of lip to top deck 2 1/2”
K Height from drain to center of overflow 16 1/2”
L Maximum water level 14 3/4”
M Slope of backrest 24°
N Width of access panel opening 38 3/4”
O Height of access panel opening 5 1/8”
TECHNICAL SPECIFICATIONS
OTHERS - Faucets must be freestanding or wall-mounted. - The turbine must be remotely installed.
FREESTANDING INSTALLATION
6838
BA
C
E
F D
GH
I M KL
J
N
O
6838
BA
C
E
F D
GH
I M KL
J
N
O
6838
BA
C
E
F D
GH
I M KL
J
N
O
6838
BA
C
E
F D
GH
I M KL
J
N
O
Deck slightly modified to host the AromaCloud.
Access panel
TOTAL PRICE $
www.bainultra.com
1 800 463.2187 From 8 a.m. to 8 p.m. Monday to Thursday (EST) [email protected] From 8 a.m. to 5 p.m. on Friday (EST)
THERMOMASSEUR (TMU)
Jets 42
1 heated backrest included
MiaPlus® Control included
Geysair® included
AromaCloud® $
Illuzio Chromatherapy NEW $
2nd heated backrest (advanced technology) $
PRODUCT SHEET
ORIGAMI 7236 ORIGINAL SERIES 72” X 36” X 22”
OPTIONAL UPCHARGE APPLICABLE
COLOR
Standard
White Biscuit
Optional
Gray
$
FINISH
UltraVelour Matte Finish (White Only) $
CONTROL (TMU ONLY)
MiaMulti ® $
SKIRT (2” LIP ONLY) MULTIFIT SJ-1
Skirt $ $
Optional color $ $
FEATURES
Installation typesDrop-in: 1/2”, 2” & 4”
Undermount & Alcove (3 walls): 2”
No. of bathers Imp. gallons 54
US gallons 64
WASTE & OVERFLOW 16” x 35” INTEGRATED WASTE & OVERFLOW
White, Biscuit $ $
Chrome $ $
Brass $ $
Brushed & Polished nickel $ $
Oil-rubbed bronze $ N/A
TILE FLANGE WITH 2” LIP ONLY (specify front or back)
Ordered with bath, uninstalled $
Factory-installed $
THERMOMASSEUR ® BATH $
TUB $
TUB (soaker)
AromaCloud® $
Illuzio Chromatherapy NEW $
WarmTouchShell® $
DOT control included with therapy
2nd WarmTouchShell® $
DON’T FORGET TO INDICATE THE DECK HEIGHT (2’’ OR 4’’).
Co
pyri
ght
© M
arch
20
18 B
ain
Ult
ra In
c. A
ll ri
ghts
res
erve
d.
The specifications shown indicate the outer edge dimension and the inside bathing capacity dimension measured at air jets’ height. The manufacturer accepts a 1/4” [0.64 cm] variance. There are variations on each product and specifications are subject to change as we improve upon our product as required. The dimensions needed for site preparation and structure building will differ. BainUltra ® assumes no responsibility for preparatory work done prior to the product being on site.
ORIGAMI 7236 ORIGINAL SERIES 72” X 36” X 22”
ACCESSORIES (OPTIONAL)
Hot water supply required Should be 70% of water capacity of tub or greater.
Turbine
Access to the pump must be at least 18” X 22”. Standard connection is 20 A. 120 V, 60 hz, dedicated line with a Ground-Fault Circuit Interrupter (GFCI). For any additional option, a second line is needed 15 A. 120 V, 60 hz, dedicated line with a GFCI. Air vent necessary: 2” X 4” minimum
Our products must be installed by certified professionals only and according to our Owner’s Manual as well as federal, provincial/state and local building codes and regulations (www.bainultra.com/documentation/documentation).
WARRANTY
* Some restrictions apply | www.bainultra.com/warranty
Approx. shipping weight 137 lbs
Turbine power 550 W
Air heater 600 W
Controls–LED–Geysair* 5 years
Bath & turbine* 20 years
CUTTING TEMPLATE # 90000047
TECHNICAL SPECIFICATIONS
OTHER Optional tile flange with 2” lip height only (specify front or back).
TOTAL PRICE $
ALCOVE / DROP-IN / UNDERMOUNT INSTALLATION
AromaCloud position Heated backrest (TMU)
Control position when factory-installed (Mia or Dot) WarmTouchShell position
Turbine position (TMU)
When tiling flange is added, the AromaCloud will automatically be installed on the opposite side of the flange.
LETTER DESCRIPTION MEASURE
A Outside edge to center drain 11 1/4”
B Outside edge to overflow 4 5/8”
C Total length (with slim deck height) 71 1/4” Total length (with 2” deck height) 71 5/8” Total length (with 4” deck height) 72”
D Total width (with slim deck height) 35 1/4” Total width (with 2” deck height) 35 5/8” Total width (with 4” deck height) 36”
E Bathing well length 48 1/8”
F Bathing well width 22”
G Deck width 4 3/8”
H Deck width at backrest end 1 3/4”
I Height from bottom of lip to top deck 1/2”
J Height from bottom of lip to top deck 2”
K Height from bottom of lip to top deck 4”
L Height from bottom of tub to top deck 22”
M Height from drain to center of overflow 17 5/8”
N Maximum water level 16”
O Slope of backrest 24°
MN
K
L
F D
H
E
C
G
O
BA
J
7236
I
MN
K
L
F D
H
E
C
G
O
BA
J
7236
I
MN
K
L
F D
H
E
C
G
O
BA
J
7236
I
www.bainultra.com
1 800 463.2187 From 8 a.m. to 8 p.m. Monday to Thursday (EST) [email protected] From 8 a.m. to 5 p.m. on Friday (EST)
THERMOMASSEUR (TMU)
Jets 44
1 heated backrest included
MiaPlus® Control included
Geysair® included
AromaCloud® $
Illuzio Chromatherapy NEW $
2nd heated backrest (advanced technology) $
PRODUCT SHEET
ORIGAMI 7242 ORIGINAL SERIES 72” X 42” X 22”
Standard Deck 5”Slim Deck 1/2"
OPTIONAL UPCHARGE APPLICABLE
COLOR
Standard
White Biscuit
Optional
Gray
$
FINISH
UltraVelour Matte Finish (White Only) $
CONTROL (TMU ONLY)
MiaMulti ® $
SKIRT (2” LIP ONLY) MULTIFIT SJ-1
Skirt $ $
Optional color $ $
FEATURES
Installation typesDrop-in: 1/2”, 2” & 5”
Undermount & Alcove (3 walls): 2”
No. of bathers Imp. gallons 60
US gallons 72
WASTE & OVERFLOW 16” x 35” INTEGRATED WASTE & OVERFLOW
White, Biscuit $ $
Chrome $ $
Brass $ $
Brushed & Polished nickel $ $
Oil-rubbed bronze $ N/A
TILE FLANGE WITH 2” LIP ONLY (specify front or back)
Ordered with bath, uninstalled $
Factory-installed $
THERMOMASSEUR ® BATH $
TUB $
TUB (soaker)
AromaCloud® $
Illuzio Chromatherapy NEW $
WarmTouchShell® $
DOT control included with therapy
2nd WarmTouchShell® $
DON’T FORGET TO INDICATE THE DECK HEIGHT (1/2’’, 2’’ OR 5’’). SPECIFY WASTE POSITION. SLIM DECK ARE AVAILABLE WITH DROP-IN INSTALLATION ONLY.
Co
pyri
ght
© M
arch
20
18 B
ain
Ult
ra In
c. A
ll ri
ghts
res
erve
d.
The specifications shown indicate the outer edge dimension and the inside bathing capacity dimension measured at air jets’ height. The manufacturer accepts a 1/4” [0.64 cm] variance. There are variations on each product and specifications are subject to change as we improve upon our product as required. The dimensions needed for site preparation and structure building will differ. BainUltra ® assumes no responsibility for preparatory work done prior to the product being on site.
ORIGAMI 7242 ORIGINAL SERIES 72” X 42” X 22”
ACCESSORIES (OPTIONAL)
Hot water supply required Should be 70% of water capacity of tub or greater.
Turbine
Access to the pump must be at least 18” X 22”. Standard connection is 20 A. 120 V, 60 hz, dedicated line with a Ground-Fault Circuit Interrupter (GFCI). For any additional option, a second line is needed 15 A. 120 V, 60 hz, dedicated line with a GFCI. Air vent necessary: 2” X 4” minimum
Our products must be installed by certified professionals only and according to our Owner’s Manual as well as federal, provincial/state and local building codes and regulations (www.bainultra.com/documentation/documentation).
WARRANTY
* Some restrictions apply | www.bainultra.com/warranty
Approx. shipping weight 140 lbs
Turbine power 550 W
Air heater 600 W
Controls–LED–Geysair* 5 years
Bath & turbine* 20 years
CUTTING TEMPLATE # 90000035
AromaCloud position Heated backrest (TMU)
Control position when factory-installed (Mia or Dot) WarmTouchShell position
Turbine position (TMU)
When tiling flange is added, the AromaCloud will automatically be installed on the opposite side of the flange.
LETTER DESCRIPTION MEASURE
A Outside edge to center drain 12 1/4”
B Outside edge to overflow 5 3/8”
C Total length (with 1/2” deck height) 71 1/4” Total length (with 2” deck height) 71 5/8” Total length (with 5” deck height) 72 1/8”
D Total width (with 1/2” deck height) 41 1/4” Total width (with 2” deck height) 41 5/8” Total width (with 5” deck height) 42 1/8”
E Bathing well length 45”
F Bathing well width 26 1/4”
G Deck width 5 3/8”
H Deck width at backrest end 3”
I Height from bottom of tub to top deck 22”
J Height from bottom of lip to top deck 2”
K Height from bottom of lip to top deck 5”
L Height from drain to center of overflow 17 1/8”
M Maximum water level 16”
N Slope of backrest 24°
O Height from bottom of lip to top deck 1/2”
TECHNICAL SPECIFICATIONS
OTHER Optional tile flange with 2” lip height only (specify front or back).
TOTAL PRICE $
ALCOVE / DROP-IN / UNDERMOUNT INSTALLATION
O
I
F D
GE
C
LM
K
N
BAH
J
7242
O
I
F D
GE
C
LM
K
N
BAH
J
7242 O
I
F D
GE
C
LM
K
N
BAH
J
7242
www.bainultra.com
1 800 463.2187 From 8 a.m. to 8 p.m. Monday to Thursday (EST) [email protected] From 8 a.m. to 5 p.m. on Friday (EST)
OPTIONAL UPCHARGE APPLICABLE
COLOR
Standard
White Biscuit
Optional
Gray
$
FINISH
UltraVelour Matte Finish (White Only) $
CONTROL (TMU ONLY)
MiaMulti ® $
INTEGRATED WASTE & OVERFLOW
White $
Biscuit $
Chrome $
Brass $
Brushed & Polished nickel $
THERMOMASSEUR (TMU)
Jets 42
1 heated backrest included
MiaPlus® Control included
Geysair® included
AromaCloud® $
Illuzio Chromatherapy NEW $
2nd heated backrest (advanced technology) $
PRODUCT SHEET
ORIGAMI 7242 DESIGN SERIES (FREESTANDING) 72” X 42” X 23”
FEATURES
Installation type Freestanding
No. of bathers Imp. gallons 52
US gallons 63 Waste & overflow (16” x 35”) inst. & incl.
FREESTANDING
THERMOMASSEUR ® BATH $
TUB $
TUB (soaker)
AromaCloudTM $
Illuzio Chromatherapy NEW $
WarmTouchShell® $
DOT control included with therapy
2nd WarmTouchShell $
DON’T FORGET TO SPECIFY THE FINISH OF THE WASTE & OVERFLOW.
Co
pyri
ght
© M
arch
20
18 B
ain
Ult
ra In
c. A
ll ri
ghts
res
erve
d.
The specifications shown indicate the outer edge dimension and the inside bathing capacity dimension measured at air jets’ height. The manufacturer accepts a 1/4” [0.64 cm] variance. There are variations on each product and specifications are subject to change as we improve upon our product as required. The dimensions needed for site preparation and structure building will differ. BainUltra ® assumes no responsibility for preparatory work done prior to the product being on site.
ORIGAMI 7242 DESIGN SERIES (FREESTANDING) 72” X 42” X 23”
ACCESSORIES (OPTIONAL)
Hot water supply required Should be 70% of water capacity of tub or greater.
Turbine
Access to the pump must be at least 18” X 22”. Standard connection is 20 A. 120 V, 60 hz, dedicated line with a Ground-Fault Circuit Interrupter (GFCI). For any additional option, a second line is needed 15 A. 120 V, 60 hz, dedicated line with a GFCI. Air vent necessary: 2” X 4” minimum
Our products must be installed by certified professionals only and according to our Owner’s Manual as well as federal, provincial/state and local building codes and regulations (www.bainultra.com/documentation/documentation).
WARRANTY
* Some restrictions apply | www.bainultra.com/warranty
Approx. shipping weight 270 lbs
Turbine power 550 W
Air heater 600 W
Controls–LED–Geysair* 5 years
Bath & turbine* 20 years
CUTTING TEMPLATE # 90000052
AromaCloud position Heated backrest (TMU)
Control position when WarmTouchShell position factory-installed (Mia or Dot)
Turbine position (TMU)
LETTER DESCRIPTION MEASURE
A Outside edge to center drain 12 3/4”
B Outside edge to overflow 7 3/8”
C Total length 72”
D Total width 42”
E Bathing well length 45 3/4”
F Bathing well width 23 3/8”
G Deck width at drain end 6 1/2”
H Deck width at backrest end 3 5/8”
I Height from bottom of tub to top deck 23 1/8”
J Height from bottom of lip to top deck 3”
K Height from drain to center of overflow 17 1/2”
L Maximum water level 15 3/4”
M Slope of backrest 24°
N Width of access panel opening 38 3/4”
O Height of access panel opening 5 1/8”
TECHNICAL SPECIFICATIONS
OTHERS - Faucets must be freestanding or wall-mounted. - The turbine must be remotely installed.
FREESTANDING INSTALLATION
Deck slightly modified to host the AromaCloud.
CE
BA
F D
GH
I M K
N
OL
J
CE
BA
F D
GH
I M K
N
OL
J
CE
BA
F D
GH
I M K
N
OL
J
CE
BA
F D
GH
I M K
N
OL
JAccess panel
TOTAL PRICE $