orgaization systems

2012

www.panelplus.co

ORGANIZATION SYSTEMS

G-324

pgs. 324-383

G Base CabinetStorage Solutions

Counter Mount Waste Containers

Cutlery Organizers

Galley Rail

ClosetOrganizers

Door Mount

pg. 333

• Base & Wall Filler Pull Outs - pgs. 375-376• Chrome Blind Corner Optimizer - pg. 375• Cookware Organizers - pg. 373• Pull Out Side Mount Organizer - pg. 374• Under Sink Chrome Basket - pg. 374

• Knife & Cutting Board - pg. 368• Plastic Trays - pgs. 369-370• Spice Trays (Plastic) - pg. 370• Spice Trays (Wood) - pg. 368• Wood Cutlery - pg. 371

pg. 334

• Closet Safe - pg. 340• Coat & Hat Hooks - pg. 357• Hang Rod Brackets (Steel) - pgs. 354-356• Jewelry Trays - pg. 350• Lighting (LED Motion) - pg. 359• Pant Racks - pg. 352• Pull Down Closet Rod - pg. 358• Round & Oval Hang Rod Aluminum - pg. 354 Steel - pgs. 355-356• Shoe Rail - pg. 350• Suspension Rails - pg. 357• Tie Racks - pgs. 351-352• Vanguard® Closet Solutions • Closet Shelf Supports - pgs. 341-342 • Hand Rod Supports - pg. 342 • Wood Hand Rod - pg. 343• Wire Baskets - pg. 353

• Cutting Boards - pg. 377• Door Storage Trays - pg. 371• Spice Racks - pgs. 372, 378• Vertical Foil Rack - pg. 378

Organization System

sK

itchen, Closet, Garage, Laundry &

BathroomGarage

Organization System

• Bike & Sports Equipment Hanger - pg. 346• Brackets - pg. 348• Great Wall - pg. 349• Tool Racks - pgs. 345, 347• Utility Baskets - pg. 344• Utility Hooks - pgs. 347-348

Heavy DutyMixer / Appliance Lift

pg. 366

Hampers

• Roll Out - pg. 360• Wire - pg. 351

ClosetLighting

• LED Motion Light - pg. 359

Filler Mouldings & Caps

• Beaded/Fluted Reversible Filler Mouldings - pg. 334• Beaded/Fluted Caps - pg. 334

G-325

Pull-Out WasteContainer

Sink Front Trays & Hardware

Tot - Lock

Tray Dividers

Wine & Stemware

Range Hoods (Wood)

Tambour

Towel Holder

Wicker Baskets

pg. 367

pg. 366

pgs. 372pg. 361

pgs. 362-363

• Appliance Garage Kit - pgs. 336, 339 • Bamboo Doors - pg. 335• Garage Door Sheets - pgs. 336-337• Paintable - pg. 335• Roll Top Desk Door - pg. 337 • Spring Tension Track Kit - pg. 339• Tracks - pg. 338

pgs. 372

pg. 377

• Built In Waste Bins - pg. 333• Double Container - pgs. 379-380• Solid Wood Pull-Out With PVC Waste Bins - pg. 383• Stainless Steel - pg. 382• Wire - pg. 380-381

Omega Kitchen Storage

• Deep Bin Super Susan - pg. 365• Plate Display Unit - pg. 364• Select Spice Susan - pg. 365• Spice Rack - pgs. 364-365• Tra-Sta Deep Drawer Kit - pg. 365• Tra-Sta Organizer - pg. 365• Wood Spice Drawer Insert - pg. 364

Spice Organizers

Ironing BoardCenter

pg. 359

Lazy Susans• Deep Bin Super Susan - pg. 365• D-Shaped Wood - pg. 332 • Half Moon Polymer - pg. 329• Mouldings - Flexible - pg. 332• Polymer - pgs. 326-329• Wood - pgs. 330-332

Rev•A•Shelf®

• Select Spice Susan - pg. 365• Spice Drawer Inserts - pgs. 364, 368• Spice Drawer Trays - pg. 370• Spice Racks - pgs. 364, 372, 378

• Applicance Lift - pg. 366• Bathroom / Laundry - pgs. 351, 359-360• Closet Organizers - pgs. 350-353, 358-359• Cutlery Trays - pgs. 368-371• Kitchen Door / Cabinet Organizers - pgs. 371-378• Lazy Susans - pgs. 326-332 • Pull-Outs - pgs. 351-353, 359-360, 372-376, 379-383• Sink Front Trays - pg. 367• Waste Bins / Containers - pgs. 333, 379-383• Wine & Stemware - pg. 361

G-326

DEPENDENTLY ROTATING SHELVES(ALL SHELVES TURN TOGETHER AT ONE TIME)

• Features a 3/4” chrome plated diameter shaft system for absolute durability.• Accommodates inside cabinet height ranges of 24” to 46”.• Installation Hardware included with all units.

(SHELVES TURN INDEPENDENT OF EACH OTHER)• Single shelf unit features a 1” chrome plated x 5” high shaft, positioner

assembly and mounting screws for a smooth & finished look.• The two (2) shelf sets feature a 1” chrome plated shaft system

with a height adjustment of 26”- 32”.• Installation hardware included with all units.

cHROME HUB FEATURE

PIvOT

cOllAR ASSEMBly

3/4” DIAMETERSHAFT

SHElvES

2 SHElF SET 3 SHElF SET

Positioner mounts assembly underneath

not shown in Photo

1” DIAMETER5” lOng SHAFT

SInglE SHElF - 6621 SERIES

1” DIAMETERSHAFTSHElF

6072 SERIES

PART # COLOR# OF

SHELVESDIAMETER

OF SHELVES

ACCOMMODATES INSIDE CABINET

HEIGHT6012-18-11-52 White 2 18” 24” to 31”6012-18-15-52 Almond 2 18” 24” to 31”6012-20-11-52 White 2 20” 24” to 31”6012-20-15-52 Almond 2 20” 24” to 31”6012-24-11-52 White 2 24” 24” to 31”6012-24-15-52 Almond 2 24” 24” to 31”6012-28-11-52 White 2 28” 24” to 31”6012-28-15-52 Almond 2 28” 24” to 31”6013-18-11-526 White 3 18” 38” to 46”6013-18-15-526 Almond 3 18” 38” to 46”6013-20-11-526 White 3 20” 38” to 46”6013-20-15-526 Almond 3 20” 38” to 46”

PART # COLOR# OF

SHELVESDIAMETER

OF SHELVES


HEIGHT6072-16-15-52 Almond 2 16” 26”- 32”6072-16-11-52 White 2 16” 26”- 32”6072-18-15-52 Almond 2 18” 26”- 32”6072-18-11-52 White 2 18” 26”- 32”6072-20-15-52 Almond 2 20” 26”- 32”6072-20-11-52 White 2 20” 26”- 32”6072-24-15-52 Almond 2 24” 26”- 32”6072-24-11-52 White 2 24” 26”- 32”6072-28-15-52 Almond 2 28” 26”-32”6072-28-11-52 White 2 28” 26”-32”6072-32-15-52 Almond 2 32” 26”-32”6072-32-11-52 White 2 32” 26”-32”

FULL CIRCLE POLYMER LAZY SUSANS

INDEPENDENTLY ROTATING SHELVES

G-327

DEPENDENTLY ROTATING - SHELVES ATTACH TO DOOR

(SHELVES TURN INDEPENDENT OF EACH OTHER)

• “D” shaped Susans give the maximum space utilization in diagonal wall & base cabinets.

• Available in 20” and 22” diameters. • 2 shelf accommodates an inside

cabinet height (IcH) of 26-32”.• 1” Diameter Shaft.

AC

D

B

D-SHAPE

DIAMETER A B C D20” 8-7/8” 9-1/4” 19” 20-1/8”22” 7-3/16” 16-5/8” 18-3/16” 22”

DIAMETER A B C D Z24” 1-3/8” 1-15/16 13-15/16” 24” 10-9/16” + 1/8”28” 3” 4-1/4” 18-1/4” 28” 10-11/16” + 1/8”

AC

D

B

PIE cUT

Z

5” lOng SHAFT 1” DIAMETER

cHROME HUB

SHAFTSHElF

SHAFT

SHElF

BASE

• These units are recognized throughout the industry as the leader in strength functionality and adjustability for a corner base system.

• The 24” & 28” feature 1” diameter shaft system.• All diameters feature hardened

screws for non slip protection and lubrication on polymer components.


PART # COLOR# OF

SHELVESSHELF

DIAMETERACCOMMODATES

INSIDE CABINET HEIGHT6272-20-11-52 White 2 20” 26-32”6272-20-15-52 Almond 2 20” 26-32”6272-22-11-52 White 2 22” 26-32”6272-22-15-52 Almond 2 22” 26-32”

PART # COLORSHELF

DIAMETER# OF

SHELVESSHAFT


INSIDE CABINET HEIGHT6942-24-11-52 White 24” 2 1” 26”-32”6942-24-15-52 Almond 24” 2 1” 26”-32”6942-28-11-52 White 28” 2 1” 26”-32”6942-28-15-52 Almond 28” 2 1” 26”-32”

“D” SHAPED POLYMER LAZY SUSANS SETS

PIE CUT POLYMER LAZY SUSANSCORNER BASE CABINET SYSTEM

G-328

INDEPENDENTLY ROTATING SHELVES(SHELVES ROTATE INDEPENDENT OF EACH OTHER)

• Available in a single tray with a 5” chrome plated shaft and hardware set for a smooth finished look.

• Available in a two shelf set with a 1” diameter chrome plated steel tubing, chrome hub, telescoping upper shaft and zinc die cast hardware components for superior independent rotation.

cHROME HUB FEATURE

AC

D

B

KIDnEy

DIAMETER A B C D18” 1-3/4” 2-13/16” 11-13/16” 18”24” 1-1/2” 2-5/16” 14-5/16” 24”28” 3” 4-11/16” 18-5/8” 28”32” 4-1/4” 6-7/16” 22-7/16” 32”

SHELF DIAMETER HEIGHT SPILL LIP A R B D18” 1-7/16” 3/4” 2-1/4” 9” 6-13/16” 11-3/4”24” 2-5/16” 3/4” 2” 12” 10-1/16” 14-1/2”28” 2-9/16” 1” 3-1/2” 14” 10-9/16” 18”32” 2-9/16” 1” 4-3/4” 16” 11-3/8” 21-1/4”

SHElF SPEcIFIcATIOnS

VALUE LINE• Save money and maintain quality with our value line kidney shelf system.• Features high performance polymer hubs and steel shafts with the twist and lock telescoping post.• Available in 2 shelf only in white or almond.

5” SHAFT

*�All�charts�and�specifications�also�apply�to�the�value�line.

UnIvERSAlBRAcKET

POlyMER HUB

STEEl SHAFT

• Save money and maintain quality with our value line full circle shelf system.

• Features high performance polymer hubs and steel shafts with the twist and lock telescoping post.

• Available in 2 or 3 shelves in either white or almond.

contain: 3072- (2) shelves, telescoping shaft to accommodate 26” - 31” Inner cabinet Height, mounting hardware-complete with screws.3073-**-**-531-(3) shelves, telescoping shaft to accommodate 31” - 38” Inner cabinet Height, mounting hardware-complete with screws.3073-**-**-536-(3) shelves, telescoping shaft to accommodate 38” - 46” inner cabinet Height, mounting hardware-complete with screws.

If using with face frame cabinet follow specs: “H” = Height, “L” = Spill Lip, “A” = Center of Rotation, “R” = Tray Radius, “B” = Cabinet Opening, “D” = Cabinet Depth.

1/2” CL.(REF)

13/16” CL.(REF)

1/2” CL.(REF)R

AD B

3/4” (REF)

FACE FRAME

OF CABINET

A

DIMENSIONS FOR

FACE FRAME CABINET

PART # COLOR# OF

SHELVESSHELF


INSIDE CABINET HEIGHT6472-18-11-52 White 2 18” 26”-31”6472-18-15-52 Almond 2 18” 26”-31”6472-24-11-52 White 2 24” 26”-31”6472-24-15-52 Almond 2 24” 26”-31”6472-28-11-52 White 2 28” 26”-31”6472-28-15-52 Almond 2 28” 26”-31”6472-32-11-52 White 2 32” 26”-31”6472-32-15-52 Almond 2 32” 26”-31”

PART # COLOR# OF

SHELVESSHELF

DIAMETER


HEIGHT3472-24-11-52 White 2 24” 26”-31”3472-24-15-52 Almond 2 24” 26”-31”3472-28-11-52 White 2 28” 26”-31”3472-28-15-52 Almond 2 28” 26”-31”3472-32-11-52 White 2 32” 26”-31”3472-32-15-52 Almond 2 32” 26”-31”

PART # COLOR# OF

SHELVESSHELF

DIA.3072-18-11-52 White 2 18”3072-18-15-52 Almond 2 18”3072-20-11-52 White 2 20”3072-20-15-52 Almond 2 20”3072-28-11-52 White 2 28”3072-28-15-52 Almond 2 28”3073-18-11-531 White 3 18”3073-18-15-531 Almond 3 18”3073-18-11-536 White 3 18”3073-18-15-536 Almond 3 18”

KIDNEY SHAPED POLYMER LAZY SUSANS

VALUE LINE FULL CIRCLE SHELF SETS, INDEPENDENTLY ROTATING

G-329

FRAMED CABINET SPECIFICATIONS

FRAMELESS CABINET (EURO) SPECIFICATIONS

• Available in a single and double shelf set.• Available in 3 minimum cabinet opening sizes:

13-1/4”, 16-1/8”, and 19-1/4”.• The half moon series includes standard framed and 90 degree

hinge euro brackets.• Includes chrome-plated shaft and mounting brackets to help

distribute the weight from the cabinet wall to the floor of the cabinet.• Includes color coated shelf supports to match the shelves and

provide maximum deflection support.• Available in white and almond where noted.

A

B

CD

10-1/4

STAnDARD SHElF SUPPORT BRAcKET

TRAY SIZE A B C D31 33-11/16” 21-1/2” 13-1/4” 21-1/16”33 34-5/16” 18-9/16” 16-1/8” 24-1/16”39 40-11/16” 21-13/16” 19-1/4” 27-3/8”

TRAY SIZE A B C D31 32-13/16” 21-1/2” 15” 21-1/16”33 33-3/16” 18-9/16” 17-7/16” 24-1/16”39 39-7/8” 21-13/16” 20-3/4” 27-3/8”

A

B

COFFSET SHElF

SUPPORT BRAcKET

SInglE

DOUBlE

D

10-1/4

SHELF SUPPORT(1)

SHELF SUPPORT

(2)

SLIDE ASSEMBLY

SLIDE ASSEMBLY ATTACHED TO SHELF SUPPORT

PART # COLOR# OF

SHELVESTRAY

LENGTH

ACCOMMODATES MINIMUM CABINET

OPENING OF:

SINGLE TRAY PIVOTS AND

SLIDE

6881-31-11-52 White 1 31” 13-1/4”6881-31-15-52 Almond 1 31” 13-1/4”6881-33-11-52 White 1 33” 16-1/8”6881-33-15-52 Almond 1 33” 16-1/8”6881-39-11-52 White 1 39” 19-1/4”6881-39-15-52 Almond 1 39” 19-1/4”

TWO SHELF SETS PIVOTS

AND SLIDE


TWO SHELF SET (1) PIVOT AND (1) PIVOT

& SLIDE


TWO SHELF SETS PIVOTS

ONLY


HALF MOON POLYMER LAZY SUSANS

G-330

These durable wood shelves are made with a 5/8” thick high-density multi-ply tray & 1” high solid wood rim that’s protected with a

UV-cured clear coat finish.

4WlS001-*-52

INDEPENDENTLY ROTATING SYSTEM

• Our wood susans offer the beauty of Maple without the worries or warping and splitting.• Our wood trays are made with a 5/8” thick high density multi-ply tray and a 1” high solid

wood rim that’s protected with a Uv cured clearcoat finish.

(SHELVES ROTATE INDEPENDENTLY OF EACH OTHER)

AC

D

B

DIAMETER A B C D24” 1-7/16” 2-1/2” 14-1/4” 23-15/16”28” 2-7/8” 4-3/8” 18-1/4” 27-3/4”32” 4-1/16” 6-1/16” 21-15/16” 31-3/4”

4WlS401-*-BS52Not�avail.�in�24”

HAS METAl BAll BEARIng SWIvEl ATTAcHED (not shown)

4WlS421-*-52

5” SHAFT

4BS-10-14B-10-1

This “wood series features a durable 1” chrome plated diameter shaft system with independent rotating hardware and a telescoping shaft.

4WlS072-*-52

4WlS073-*-536

cHROME HUB

SHAFT

SHElF

PART # DIAMETER


HEIGHTSINGLE TRAY W/SWIVEL &

BEARING ATTACHMENT4WLS401-28-BS52 28” Any4WLS401-32-BS52 32” Any

2 SHELF SET4WLS472-24-52 24” 26” - 31”4WLS472-28-52 28” 26” - 31”4WLS472-32-52 32” 26” - 31”

DESCRIPTION PART #DIMENSIONS(IN DIAMETER)


HEIGHT

SINGLE TRAYNOT PRE-DRILLED(NO HARDWARE)

4WLS001-18-52 18” Any4WLS001-20-52 20” Any4WLS001-28-52 28” Any4WLS001-32-52 32” Any

SINGLE TRAY WITH SWIVEL & BEARING

ATTACHED (NO SHAFT)

4WLS001-18-B52 18” Any4WLS001-20-B52 20” Any4WLS001-28-B52 28” Any4WLS001-32-B52 32” Any

2 SHELF SET4WLS072-18-52 18” 26”-31”4WLS072-20-52 20” 26”-31”4WLS072-28-52 28” 26”-31”4WLS072-32-52 32” 26”-31”

3 SHELF SET 4WLS073-18-536 18” 38”-46”4WLS073-20-536 20” 38”-46”

PART # DESCRIPTION4B-7-1 7” dia. Bearing

4BS-7-1 7” dia. Bearing w/ Stop4B-10-1 10” dia. Bearing

4BS-10-1 10” dia. Bearing w/ Stop

4WlS472-*-52

cHROME HUB

SHElF1” SHAFT

All�Wood�Items�Are�Carb�Phase�II�Compliant

FULL CIRCLE WOOD LAZY SUSANS

KIDNEY SHAPED WOOD SUSANS

G-331

• Our Pie cut Susans are now available in wood and made of 5/8” thick high-density multi-ply tray and 1” high solid wood rim.

• Available in a 2 shelf system. • Ideal for a corner base cabinet.• The 2 shelf set features a 1” diameter chrome shaft

system and all hardware.

DIAMETER A B C D Z24” 1-3/8” 1-15/16 13-15/16” 24” 10-9/16” + 1/8”28” 3” 4-1/4” 18-1/4” 28” 10-11/16” + 1/8”31” 4” 5-3/4” 21” 32” 11-15/16 + 1/8”

AC

D

B

PIE cUT

Z

• The Half Moon Susan is now available and made of 5/8” thick high-density multi-ply tray and 1” high solid wood rim that’s protected with a Uv-cured clearcoat finish.

• Available in a two shelf system only and in three tray lengths- (32”, 35” & 38”).

• Ideal solution for a blind corner cabinet application.

• This system features a pivot and pull on both shelves and are adaptable to a left or right hand cabinet application.

4WlS942-*-52

SlIDE ASSEMBly PRIOR TO SHElF BEIng ATTAcHED

SHElF

SHElFSUPPORT

InclUDED AccESSORIES

SHElF SUPPORT SlIDE ASSEMBlIES

PART # DIAMETERACCOMMODATES INSIDE

CABINET HEIGHT

TWO SHELF SET

4WLS942-24P-52 24” 26” - 32”4WLS942-28P-52 28” 26” - 32”4WLS942-31P-52 31” 26” - 32”

PART # DIAMETER

ACCOMMODATES MINIMUM CABINET

OPENING OF:4WLS882-32-570 32” 12”4WLS882-35-570 35” 15”4WLS882-38-570 38” 18”

PIE CUT WOOD SUSANS

HALF MOON WOOD SHELF SUSAN

All�Wood�Items�Are�Carb�Phase�II�Compliant

G-332


• ”D” Shaped Susans give the maximum space utilization in diagonal and wall base cabinets.• Our “D” Shaped Wood shows off the beauty of maple without the worries of warping and splitting.• This durable wood shelf is made with 5/8” thick high density multi-ply tray and 1” high solid wood trim that is protected with a Uv-cured clear coat finish.• Available in a single shelf w/ swivel and bearing stop, single shelf w/ positioner assembly and 5” shaft and 2 shelf w/ accommodating shaft.

DIAMETER A B C D20” 8 3/8” 11” 18 3/8” 20”31” 14” 12 7/8” 29 1/2” 31”

Single Shelf w/Shaft 4WLS221-*-52

2 Shelf Set 4WLS272-*-52

D

C

AB

SInglE TRAynO SHAFT

METAl BAll-BEARIng SWIvEl

4Wl201-20-BS52

(SHELVES TURN INDEPENDENTLY OF EACH OTHER)

308-1254-WH 1-1/2” 1.500

.125

.500

Available in WhiteS3 OR S9 SLOTTER

Flexible Lazy Susan Moulding

PVC Material50’ Rolls

PART # DIAMETER


HEIGHTSINGLE TRAY W/ METAL BALL SWIVEL BEARING ATTACHED (NO SHAFT)

4WLS201-20-BS52 20” Any

4WLS201-31-BS52 31” Any

2 SHELF SET4WLS272-20-52 20” 26” - 31”

4WLS272-31-52 31” 26” - 31”

“D” SHAPED WOOD SUSANSAll�Wood�Items�Are�Carb�Phase�II�Compliant

G-333

Rev-A-Shelf presents another ultra modern innovation with the Counter Mount Waste Container. Ideal for medical offices, retail counters, recreational vehicles, upscale outdoor kitchens, and more; this waste management system sits inside the cabinet with full access to the container from the countertop. The 8-060 Series is available with an 11 or 13-liter removable container and features a stainless steel lid and soft rubber inner ring designed to seal odors.

8-700411-20 8-010 Series 8-010314-15 5368-17-13

Lid, Rubber Inner Ring & 11 or 13 Liter

Container

Open Closed for clean neat look

Ideal for keeping garbage out-of-sight. As the cabinet door opens, the lifting mechanism raises the lid enabling the container to pivot-out with the door. All pivot-outs feature an inner polymer container with built-in handle for easy removal.CONTAINS: Waste container with installation templates and fasteners.

PART # COLOR DESCRIPTION MINIMUM CABINET OPENING

8-700411-20 White Polymer(Plastic)

20 Liter Sink Base Container15 3/4” W x 7 1/4” D x 14”H 16-1/4”

8-010212-14 White Lacquered(Metal)

14 Liter Container11” W x 10 1/2” D x 13 3/4” H 13-3/4”

8-010412-15 White Lacquered(Metal)

15 Liter Container11-1/2” W x 11 1/2” D x 13 1/2” H 14-3/4”

8-010314-15 Stainless Steel 15 Liter Container11” W x 10 1/2” D x 15 3/4” H 13-3/4”

5368-17-13 Silver(Plastic Polymer)

13 Liter Container11 1/4” W x 11” D x 13 3/4” H 14-1/4”

PART # DESCRIPTION8-060-11SS 11 liter black container - with rubber ring and lid

Dia.: 12-1/4”W x 11-5/8”D8-060-15SS |15 liter black container - with rubber ring and lid

Dia.: 12-1/4”W x 15-5/8”D

8-010/5368/8-700 SERIES BUILT-IN WASTE BINS

8-060 SERIES COUNTER MOUNT WASTE CONTAINER

G-334

PART# SIZE SPECIESBFF-396-RO 3"W x 96"L Red OakBFF-396-MP 3"W x 96"L MapleBFF-396-CH 3"W x 96"L CherryBFF-696-RO 6"W x 96"L Red OakBFF-696-MP 6"W x 96"L MapleBFF-696-CH 6"W x 96"L Cherry

PART# BEADED

PART # FLUTED DESCRIPTION SPECIES

BCAP-33R-RO FCAP-33R-RO 3" x 3" Rosette Cap Red OakBCAP-33R-MP FCAP-33R-MP 3" x 3" Rosette Cap MapleBCAP-33R-CH FCAP-33R-CH 3" x 3" Rosette Cap CherryBCAP-66R-RO FCAP-66R-RO 6" x 6" Rosette Cap Red OakBCAP-66R-MP FCAP-66R-MP 6" x 6" Rosette Cap MapleBCAP-66R-CH FCAP-66R-CH 6" x 6" Rosette Cap CherryBCAP-35D-RO FCAP-35D-RO 3" x 5-1/2" Daisy Cap Red OakBCAP-35D-MP FCAP-35D-MP 3" x 5-1/2" Daisy Cap MapleBCAP-35D-CH FCAP-35D-CH 3" x 5-1/2" Daisy Cap CherryBCAP-33A-RO FCAP-33A-RO 3" x 3" Acanthus Cap Red OakBCAP-33A-MP FCAP-33A-MP 3" x 3" Acanthus Cap MapleBCAP-33A-CH FCAP-33A-CH 3" x 3" Acanthus Cap CherryBCAP-66A-RO FCAP-66A-RO 6" x 6" Acanthus Cap Red OakBCAP-66A-MP FCAP-66A-MP 6" x 6" Acanthus Cap MapleBCAP-66A-CH FCAP-66A-CH 6" x 6" Acanthus Cap Cherry

SPINDLE RAIL SPINDLE RAIL WITH LIP

POST: 1-1/4" HighRAIL: 1/2" High x 3/4" WideOVERALL HEIGHT: 2-1/4"POST SPACING: (center to center) 3"

POST: 1-1/4" HighRAIL: 1/2" High x 3/4" WideOVERALL HEIGHT: 2-1/4"POST SPACING: (center to center) 4"

POST: 1-1/4" HighRAIL: 1/2" High x 3/4" WideBASE: 3/4" High x 1" WideOVERALL HEIGHT: 2-1/2"POST SPACING: (center to center) 4"

P R O D U C T S

SMALL GALLEY RAILAvailable in Red Oak or Maple

• Works with our 3" or 6" reversible filler moulding.• Several styles available in a variety of wood species.• Other styles available, please inquire.

• One moulding designed for either beaded or fluted applications.• Offered in a variety of unfinished wood species.• 2 Widths available.• 3/4" Thick.• Angled version available, please inquire.

DAISy CAP3 x 3

ROSETTE CAP

6 x 6 ACANTHUS CAP

6 x 6 ROSETTE CAP

3 x 3 ACANTHUS CAP

BEADED/FLUTED REVERSIBLE FILLER MOULDINGS

BEADED/FLUTED CAPS

MOULDINGS

CAPS

P R O D U C T S

PART # SPECIES LENGTHBR18RO Red Oak 8 FT.BR18MP Maple 8 FT.

PART # SPECIES LENGTHBR8RO Red Oak 8 FT.BR8MP Maple 8 FT.

PART # SPECIES LENGTHSGR8RO Red Oak 8 FT.SGR8MP Maple 8 FT.

GALLEY RAIL

BEADED/FLUTED FILLER MOULDINGS & CAPS

G-335

BAMBOO TAMBOUR DOORS

UNFINISHED HARDBOARD DOOR - NOMINAL 4’ x 8’ SHEETS1/8” Unfinished Hardboard with Heavy Duty 7 oz. Duck Canvas Backing

Works with our Track Systems P-Spiral, PT, LT, UT, T-48, & ST2.

Canvas is available nominal 4.5 ft. wide. Actual width is approximately 52". Must be sold in increments of 9 square feet.

The same 7 oz. Duck Canvas Backing as used on our doors is offered to you by the square foot for your custom projects.

See page 664 for Tambour Sheets

• Designed for functional tambour door applications.• Carmelized bamboo bonded to 12 oz. poly/cloth backer.• Simply stain or top coat for the Beauty of the Pacific rim.• Nominal 36” W x 40” Slat Length.• 1/8” thick.• Works with our Track Systems A, P-Spiral, PT, LT, UT, T-48 & ST2.

PART # 1267

PART #CANVAS

PART # ECO2-TAM

P R O D U C T S

FUNCTIONAL TAMBOUR DOORS

PAINTABLE TAMBOUR SHEETS

7oz. BROWN DUCK CANVAS BACKING

G-336

AVAILABLE IN 6 WOOD VENEER FACINGS:• Plain Sliced Red Oak • Plain Sliced Maple • Plain Sliced Cherry • “Uniform White Birch” • Hickory • Alder • Nominal 3’ x 4’

6’ SLAT LENGTHS FOR LARGER APPLICATIONS

Same high quality construction series AVAILABLE IN 3 WOOD VENEER FACINGS:• Plain Sliced Red Oak • Plain Sliced Maple • “Uniform” White Birch • Nominal 40” x 72”

• Unfinished & ready to be stained.• May be used horizontally or vertically.• Extremely economical with two 1-1/2” leaders on the long side yields four to six doors.• Works with our Track Systems A, 855-856, FTT, P-Spiral, PT, LT, UT, T-48, & ST2.• Heavy duty 7 oz. Duck Canvas backing insures strength, stability & long life.


1400 SERIES

NOTE: Custom colors available with 15 piece orders. Call for special quote and lead time.

• Durable white-painted Euro-style tambour door for kitchen appliance garages, roll tops and more.• Closely matches to Wilsonart’s #1573-60 Frosty White, with semi-gloss finish.• White fabric backing.• Works with our Track Systems A, 855-856, FTT, LT, UT, T-48, & ST2.

TAMBOUR “GARAGE” DOORS400 SERIES

FROSTY WHITE TAMBOUR DOORS

PART # WOOD FACE412-RO Red Oak413-MP Maple415-CH Cherry416-WB White Birch417-HIC Hickory418-AL Alder

PART # WOOD FACE412-RO-6 Red Oak413-MP-6 Maple416-WB-6 White Birch

PART #1400-WH

APPLIANCE GARAGE DOOR KITS TAMBOUR “GARAGE” DOORS

400 SERIES

G-337

• 3/4” slat width with 30° V-groove.• Nominal 40” wide x 72” slat length.• Two 1-1/2” leaders.• Works with our Track Systems A, 855-856, FTT, LT, UT, T-48 & ST2.

We are is pleased to present the ‘ROLL TOP DESK DOOR’

This is a sectioned wood veneer door perfect for roll top desks or other expanded dimension uses.

Solid Oak Doors with 7 oz. Heavy Duty Canvas Backing makes for an ideal door in custom & flagship projects.

• Heavy duty 7 oz. Duck Canvas Backing.• Sanded & ready for staining.• Works with our Track System B.• Size is nominal.

13835/16” THICK, 3/4” HALF ROUND

1375A5/16” THICK, 3/4” CENTER SPACING,

30° GROOVE ANGLE

• Maple & Cherry Available. Please Inquire.


3/4” CENTER SPACING, 60° GROOVE ANGLE, 3/16” THICK

• Sanded & ready to be stained.• 7 oz. Brown Cloth Backer.• Works with our Track Systems A, 855-856, FTT, PT, LT, UT, T-48, ST2.

TAMBOUR “GARAGE” DOORS

PART # WOOD FACE1577-RO Red Oak1577-CH Cherry1577-MP Maple

PART # FINISH1383-4 Oak

1383-4-MP Maple1383-4-CH Cherry

1383-5 Oak1383-5-MP Maple1383-5-CH Cherry

PART #1375A-41375A-5

PART # WOOD FACE1275-RO Red Oak1275-MP Maple1275-HIC Hickory1275-CH Cherry1275-AL Alder

1275-WAL Walnut

P R O D U C T S

UNFINISHED SOLID WOOD TAMBOUR

UNFINISHED SOLID WOOD TAMBOUR DOORS

VENEER TAMBOUR DOORS FOR LARGER APPLICATIONS

G-338

• Easy to cut desired lengths. • Track can be routed 3/8” deep x 9/16” wide groove or stapled directly to end panels.• All styles accept a maximum thickness of 7/32”.

Material: PVC, White or Brown TRACK PROFILE

22”

22”

Radius1-3/4”

LT-22

SYSTEM “A” For Door Thickness 1/8”-3/16”

Stocked in Brown or Black

APPLICATIONHORIZONTAL OR VERTICAL

INTERCHANGEABLE TRACK AND CURVES(Check Your Door Thickness For Proper Track System) INSTALLATION

SYSTEM “B” For Door Thickness 1/4”-5/16”

Brown Only

PLASTIC TRACK

SYSTEM A...4T5C SYSTEM B...4T54*-AVAILABLE IN 4 FT. OR 8 FT. LENGTHS

CURVESYSTEM A...4C51 SYSTEM B...4C55

Dark Brown Only

10 1/4”

3 3/8”

24”

Radius1-1/2”

PT-24

FOR 1/4” DOOR THICKNESS • 8 FT. LONG(Check Your Door Thickness For Proper Track System)

48”

T-48

RECESSED MOUNT TRACK SYSTEM

PLASTIC TAMBOUR TRACK

FLEXIBLE TAMBOUR TRACK

ROLL TOP DESK TRACK

P-187 WORKS BEST WITH OUR 400 & 700 TAMBOUR SERIES

• Horizontal System will accept up to 21” of tambour length.• Doors should be cut 1/16”-1/8” less than distance between tracks.• Plastic spirals require approximately a 4-5/8” square area for mounting.• The track requires approximately 1” width for mounting.• Sold in pairs only, consisting of a right & left side.• Available in Brown.

FOR 3/16” DOOR THICKNESS(Check Your Door Thickness For Proper Track System)

FOR VERTICAL USE ONLY

P-SPIRAL PLASTIC TAMBOUR TRACK FOR 1/4” DOOR THICKNESS(Check Your Door Thickness For Proper Track System)

10 1/8”

24”

UT-24

Radius 1-3/4”

Shown in White


PART # COLOR DESCRIPTIONPT-24-BR Brown P TrackPT-24-WH White P TrackLT-22-BR Brown L TrackLT-22-WH White L TrackUT-24-BR Brown U TrackUT-24-WH White U TrackT-48-BR Brown Straight TrackT-48-WH White Straight Track

PART # SYSTEM “B” DESCRIPTION4C55-BR Brown tambour track curve for 1/4”-5/16” thick doors

4T54-BR-* Brown tambour door track for 1/4”-5/16” thick doors

PART #855-856

PART # COLORFTT-BK BlackFTT-WH White

PART # COLORP-187-BR Brown

PART # SYSTEM “A” DESCRIPTION4C51-BR Brown tambour track curve for 1/8”-3/16” thick doors4C51-BK Black tambour track curve for 1/8”-3/16” thick doors

4T5C-BR-* Brown tambour door track for 1/8”-3/16” thick doors4T5C-BK-* Black tambour door track for 1/8”-3/16” thick doors

P R O D U C T S

TRACK SYSTEMS FOR TAMBOUR DOORS

G-339

Appliance garage with solid wood tambour door mounted to solid wood face frame. End panels are veneer faced and backed on 3/8” MDF, using plain sliced veneer. Doweled joints; spring tension track system; smooth, nonbinding operation.Available in Red Oak, Cherry, Maple or Alder.17” W x 18-1/2” H x 11-7/8” D.Fits standard 24” corner.

Appliance garage with solid wood tambour door mounted to solid wood face frame. End panels are veneer faced and backed on 3/8” MDF, using plain sliced veneer. Doweled joints; spring tension track system; smooth, nonbinding operation.Available in Red Oak,Cherry, Alder or Maple.24” W x 18-1/2” H x 11-7/8” D.

Above styles are available in White on a custom order basis - please inquire.

Set includes quality tambour door with handpull and spring tension track system packed together. 1275 series solid tambour door and ST-2 series spring tension track in Almond. Also available with 400 series wood veneer door, please inquire. Door W: 15” or 24” x H 18”. Track H: 17-1/2”.• Make your own appliance garage using these combo kits.

* ST-3- series track available for frameless cabinets - please inquire. * White track available - please inquire.


ST3 EURO STYLE FRAMELESS MOUNTST2 FACE FRAME MOUNT• Kit includes plastic guide rails which can be stapled or screwed to face frame.

• Kit includes plastic guide rails which are recessed or flush mounted to end panels of frameless cabinet.

Material: PVC

APPLICATION:

APPLICATION:

Size: Designed for doors 19” High x .220 Thickness

CORNER UNIT STRAIGHT UNIT

PART # FINISHAG-100-C-RO Red OakAG-100-C-CH CherryAG-100-C-MP MapleAG-100-C-AL Alder

PART # FINISHAG-100-S-RO Red OakAG-100-S-CH CherryAG-100-S-MP MapleAG-100-S-AL Alder

SOLID WOOD DOOR SETSPART # FINISH SIZE

C2-1518S-RO Red Oak 15” x 18”C2-1518S-MP Maple 15” x 18”C2-1518S-CH Cherry 15” x 18”C2-2418S-RO Red Oak 24” x 18”C2-2418S-MP Maple 24” x 18”C2-2418S-CH Cherry 24” x 18”

PART # COLORDOWELWIDTH

ST2-16-WH White 16”ST2-16-AL Almond 16”ST2-24-WH White 24”ST2-24-AL Almond 24”ST2-30-WH White 30”ST2-30-AL Almond 30”ST2-36-WH White 36”ST2-36-AL Almond 36”

PART # COLORDOWELWIDTH

ST3-30-AL Almond 30”ST3-36-AL Almond 36”

APPLIANCE GARAGE DOOR KITS

DOOR AND TRACK COMBO KITS

P R O D U C T S

SPRING TENSION TRACK KITS

G-340

PRODUCT FEATURES:• Organizes jewelry- holds 36+ necklaces, 72+pair earrings &

40+ rings.• Provides full length mirror.• Easy to install - surface mount install is with 2 sheet rock

screws & anchors recess mount install is between 16” OC studs with 2 - 1-1/2” long screws (recesses 2-1/4” into wall).

• Cabinet size 14-1/4” W x 48”L x 4”D.• Available with standard touch latch or magnetic lock.• Available in medium oak, burgundy cherry, natural maple &

white to match any decor.• Forest Green fabric interior.

IS yOUR jEwElRy ORgAnIzED??

Medium Oak Burgundy Cherry Natural Maple White

*Please add appropriate code at the end of the part number (example: jC-103S-MO-T)

PRODUCT FEATURES:• Motion detector light turns on when safe is opened and turns of when safe is closed.• 50% Larger than any competitive unit.

Overall Size: 17” wide x 27” high. Inside Dimensions: 13-1/2” wide x 24” high x 6-3/4” deep.

• 5 Transparent fully adjustable shelves adjustable every 32MM. Earring and ring holders for maximum organization• White powder coating outside to match closet walls.

White powder coating inside to reflect light. No flocking to rub off on jewelry.

• High security lock with six digit touch pad.• Securely mounts between the studs with 6 bolts.• Combination can be changed, instructions included.

PART # MOUNTING FINISHJC-103S-MO-* Surface Medium OakJC-103S-BC-* Surface Burgundy CherryJC-103S-NM-* Surface Natural MapleJC-103S-WH-* Surface WhiteJC-103R-MO-* Recessed Medium OakJC-103R-BC-* Recessed Burgundy CherryJC-103R-NM-* Recessed Natural MapleJC-103R-WH-* Recessed White

PART #SAFE-1727-WH

CLOSET SAFE

JEWELRY-CLOSET™ CABINET

G-341

VG-700-629

VG-700-628

Quick & easy installation with the Vanguard shelving jigVG-600-JIG

INSTALLATION JIG FOR ALL SHELF SUPPORTS• ABS

• Available with 5mm pegs, (Inquire for sockets without pegs)• Supports closet rods up to 1-3/8” diameter• 32mm compatible

CLOSET ROD SOCKETS

• ABS• Designed to provide a shelf support for lighter load applications• Simply install directly into drywall or wood anchors

ECONOMY SHELF SUPPORT

• ABS• Works with standard 5/8” or 3/4” shelves x 12”, 14” & 16” depths• Designed to support 300 lbs. when installed with anchor & pin system (part#: VG-700-805B), no stud location required• Optional finishing cap is available to provide a professional finish where the melamine or wood shelf meets the wall

SHELF SUPPORT AND FINISHING CAP

Shown in Almond (AL)

Also available in Chocolate Pearwood (CP)

ShelfSupport

FinishingCap

AVAILABLE IN THE

FOLLOWING COLORS

White

Almond

ChocolatePearwood

White

Black

Almond

Tan

CherryBrown

ChocolatePearwood

AVAILABLE IN THE

FOLLOWING COLORS

ANCHOR & PIN SYSTEMVG-700-805B (WHITE) CARTON: 500 sets

PART # COLORCARTON

QTY.

VG-140-0116-(WH) White (AL) Almond

(CP) Chocolate Pearwood100 pairs

PART # DESCRIPTION COLORCARTON

QTY.

VG-700-639B- Economy Shelf Support

(WH) White (CP) Chocolate Pearwood

(AL) Almond (BR) Cherry Brown

(TN) Tan (BK) Black

250 pieces

VG-700-805B Anchor & Pin System White 500 sets

PART # DESCRIPTION SIZE COLORCARTON

QTY.VG-700-629-12- Shelf Support

12”(WH) White

(CP) Chocolate Pearwood

50 pairsVG-700-628A-12- 5/8” Finishing Cap 40 piecesVG-700-628C-12- 3/4” Finishing Cap 20 piecesVG-700-629-14- Shelf Support 14” 50 pairsVG-700-628-14- 3/4” Finishing Cap 20 piecesVG-700-631-16- Shelf Support

16”50 pairs

VG-700-628B-16- 5/8” Finishing Cap 40 piecesVG-700-628D-16- 3/4” Finishing Cap 20 pieces

“CREATE - A - CLOSET”...AND MORE! CLOSET, PANTRY AND GARAGE SOLUTIONS

G-342

• ABS• Use with 1-5/16” wood closet rod• Use with 12”, 14” and 16” deep shelves• Designed to support 150 lbs. when back plate is installed directly into a stud - REQUIRED• Unique back plate conceals all screws• Recommended spacing of every 36” to 48”, as long as mounted to a stud

SHELF & ROD CENTER SUPPORTS

• ABS• Use with 1-5/16” wood closet rod• Works with standard 5/8” or 3/4” shelves x 12”, 14” & 16” depths• Designed to support 300 lbs. when installed with anchor & pin system (VG-700-805B), no stud location required

ROD & SHELF SUPPORTS

• ABS• Use with 12”, 14” and 16” deep shelves• Designed to support 150 lbs. when back plate is installed directly into a stud - REQUIRED• Unique back plate conceals all screws• Recommended spacing of every 36” to 48”, as long as mounted to a stud

SHELF CENTER SUPPORTS

ANCHOR & PIN SYSTEM

VG-700-805B (WHITE) CARTON: 500 sets

BACK PLATE TO CONCEAL

SCREWS

BACK PLATE TO CONCEAL

SCREWS

VG-700-634CROSS HATCHED DESIGN

(Shown in White)

VG-700-633CROSS HATCHED DESIGN

(Shown in White)

VG-700-634CCONTEMPORARY DESIGN

(Shown in Chocolate Pearwood)

VG-700-633CCONTEMPORARY DESIGN

(Shown in Chocolate Pearwood)

VG-700-630-12 VG-700-630-16VG-700-630-14

PART # STYLE COLORCARTON

QTY.VG-700-633- Cross Hatch (WH) White

(CP) Chocolate Pearwood20

piecesVG-700-633C- Contemporary


QTY.VG-700-630-12- 12” Deep Shelf Supports (WH) White

(CP) Chocolate Pearwood

25pairsVG-700-630-14- 14” Deep Shelf Supports

VG-700-630-16- 16” Deep Shelf Supports

PART # STYLE COLORCARTON

QTY.VG-700-634- Cross Hatch (WH) White

(CP) Chocolate Pearwood20

piecesVG-700-634C- Contemporary


G-343

• 96” Long• Hemlock Wood• Seamless, scratch resistant and non-marring polyethylene cover• Finger jointed; thus no bowing, shrinking or expansion of wood• Optional end caps available

HEMLOCK CLOSET ROD & END CAPS1-5/16” Diameter Wood Closet Rod w/Plastic Cover

• 3/4” and 5/8” shelves• ABS and Polystyrene• Field trimmable, nominal 14” & 16” lengths• Effectively joins two shelf panels for corner and straight applications

SHELF JOINER

...GARAGES

...CLOSETS

...PANTRIES

VG-700-637

AVAILABLE IN THE FOLLOWING

COLORS

White Black

AlmondTan

CherryBrown Chocolate

Pearwood

VG-700-627-*

WHITE (*WH)ALMOND (*AL)

CHOCOLATE PEARWOOD (*CP)

OPTIONAL END CAPS


QTY.

VG-700-637- 3/4” x Nominal 16” Deep (WH) White (CP) Chocolate Pearwood

(AL) Almond (BR) Cherry Brown

(TN) Tan (BK) Black

100 piecesVG-700-635- 5/8” x Nominal 16” Deep

VG-700-637A- 3/4” x Nominal 14” Deep

PART # DESCRIPTIONCARTON

QTY.VG-700-641C-WH White Closet Rod 18

piecesVG-700-641C-AL Almond Closet RodVG-700-641C-CP Chocolate Pearwood Closet RodVG-700-627-WH White End Cap 100

piecesVG-700-627-AL Almond End CapVG-700-627-CP Chocolate Pearwood End Cap


G-344

SUPER BINSAll Accessories You Need To Get Organized!

13/16”1/8”

3/4”

3/4”LEVEL LINE

WITH “NO BOW” CHANNELBOWED SHELF

A B C D

• Clear Anodized *(S)• Black Powder Coat *(BK)• White Powder Coat *(W)

8 Ft. LengthsFor 1/2”, 5/8”, & 3/4” Shelves

WORKS WIth E-Z SlatWall & GREat Wall

ºThe LengTh oF The BrACkeT iS 1/4” LeSS ThAn The SuggeSTed SheLF LengTh

AVAiLABLe in 1', 2', 4’ or 8' LengThSº Made of Clear Anodized Aluminum

ALuMinuM SLATWALL SheLF BrACkeT

hOlDS UP tO 12" D ShElF x 1/4"

OR 3/4" thICK(SCREWS INClUDED FOR

3/4" thICK ONlY)EaSY aS: 1 - PICK SHELF LENGTH 2 - INSERT SHELF INTO EXTRUSION 3 - HANG ON SLATWALL

12”MAx.

SLATWALL

SHELF BRACKETS

SHELF

1/4” or 3/4”

PArT # deSCriPTion CTN QTYA GRD-9TLT-TN Plastic Tan 9 Tilt Bin Storage Unit

23 1/2”-W x 3”-H x 2”-D 12

B GRD-6TLT-TN Plastic Tan 6 Tilt Bin Storage Unit23 1/2”-W x 4 1/2”-H x 3”-D 12

C grd-5TLT-Tn Plastic Tan 5 Tilt Bin Storage Unit23 1/2”-W x 6 1/2”-H x 4 1/2”-D 6

D GRD-4TLT-TN Plastic Tan 4 Tilt Bin Storage Unit23 1/2”-W x 8”-H x 5 1/2”-D 6

PArT # LENGTH1/4”

THICKSHELF

51790-1 1’51790-2 2’51790-4 4’

PArT # LENGTH

3/4”THICKSHELF

41790-1 1’41790-2 2’41790-4 4’41790-8 8’

Part #- GRD-MT-BKdescription- Black

Mounting Clip-- Set of 2 CTN QTY- 25

12” x 6” x 6” grd-u1266-Bk...(Black)grd-u1266-Wh...(White)

Carton Quantity: 6

12” x 12” x 4”GRD-u12124-BK...(Black)GRD-u12124-WH...(White)

Carton Quantity: 6


Carton Quantity: 6


Carton Quantity: 6

PArT #SHELF WIDTH

ShF-A500-* 1/2”ShF-A625-* 5/8”ShF-A750-* 3/4”

GARAGE ORGANIZATION

ALUMINUM “NO BOW” SHELF CHANNEL

METAL UTILITY BASKETS

ALUMINUM SHELF SUPPORT BRACKET

G-345

SPECIaltY hOOKS, SUPER BaSKEtS, & SUPER ShElFAll Accessories You Need To Get Organized!

Part #- GRD-GLF-BKdescription- Charcoal Golf Accessory

Rack With BasketCTN QTY- 4

Part #- GRD-HHD-TNdescription- Tan Plastic Garden Hose Holder

(Holds Up To 150’ Of Hose & Needs Mounting Clips)CTN QTY- 4

Part #- GRD-SKTR-BKdescription- Metal Skate Rack With Basket

CTN QTY- 4

Part #- GRD-TOOL-BKdescription- Charcoal Metal Tool Rack

CTN QTY-4

Part #- grd-13TL-Bkdescription- Black 13” MagneticTool Bar (Needs Mounting Clips)

CTN QTY- 1

Part #- grd-24TL-Bkdescription- Black 24” MagneticTool Bar (Needs Mounting Clips)

CTN QTY- 1

Part #- grd-B16114-Bkdescription- Small Metal Basket

16” x 11-1/2” x 4”CTN QTY- 4

Part #- grd-B16118-Bkdescription- Large Metal Basket

16” x 11-1/2” x 8”CTN QTY- 4

Part #- grd-S2007-Bkdescription- Charcoal 20” X 7” Shelf

With 2 HooksCTN QTY- 4

GARAGE ORGANIZATION

G-346

SPECIaltY hOOKS & RaCKSAll Accessories You Need To Get Organized!

Part #- GRD-TB-BKdescription- Charcoal Metal Long Tool Bar

With PVC CoatingCTN QTY- 4

Part #- GRD-GDN-BKdescription- Charcoal Metal Garden

Rack With BasketCTN QTY- 6

Part #- grd-SPrP-Tndescription- Tan Plastic Sports Rack

(Needs Mounting Clips)CTN QTY- 1

Part #- grd-5Bh-Bkdescription- Charcoal 5” Metal Bike Hook


Part #- grd-SPor-Bkdescription- Charcoal Metal Sports

Accessory RackCTN QTY- 4

Part #- GRD-FHH-BKdescription- Charcoal Metal Fishing Rod Holder

With Rubberized Grip (Holds 4 Fishing Rods)CTN QTY- 4

Part #- GRD-HBKR-BKdescription- Charcoal Metal Horizontal

Bike RackCTN QTY- 4

Part #- GRD-SKR-BKdescription- Charcoal Metal Ski Rack

CTN QTY- 6

Part #- GRD-TNH-BKdescription- Charcoal Metal Tennis

Accessory Holder With Rubberized SleeveCTN QTY- 4

GARAGE ORGANIZATION

G-347

It’S a SNaP WIth SUPER hOOKSAll Accessories You Need To Get Organized!

PRODUCt FEatURES:• Strong & durable with positive locking action.• Works with most 3” on center slatwall.• Charcoal gray with pvc coating.

Part #- GRD-SHK-BKdescription- Charcoal Metal “S” Hook


Part #- GRD-J6-BKdescription- Charcoal Large Metal “J”

Hook With PVC CoatingCTN QTY- 6

Part #- GRD-H4L-BKdescription- Charcoal 10” Metal Hook Loop


Part #- GRD-H4SD-BKdescription- Charcoal 4” Metal Double


Part #- GRD-H8SD-BKdescription- Charcoal 8” Metal Double


Part #- GRD-J-BKdescription- Charcoal Small Metal “J” Hook


GARAGE ORGANIZATION

G-348

StaNDaRD DUtY hOOKS All Accessories You Need To Get Organized!

* Not Recommended For Use On Standard Duty Great Wall.

PArT # deSCriPTion CTN QTYgrd-PSd-2Bk Black 2” Plastic Slatwall Hook 12grd-PSd-2Fg Fog Gray 2” Plastic Slatwall Hook 12grd-PSd-2Wh White 2” Plastic Slatwall Hook 12grd-PSd-4Bk Black 4” Plastic Slatwall Hook 12grd-PSd-4Fg Fog Gray 4” Plastic Slatwall Hook 12grd-PSd-4Wh White 4” Plastic Slatwall Hook 12

PArT # deSCriPTion CTN QTYGRD-KB-8BC Brite Chrome 8” Metal Knife Bracket 6GRD-KB-8BK Black 8” Metal Knife Bracket 6GRD-KB-8WH White 8” Metal Knife Bracket 6grd-kB-10BC Brite Chrome 10” Metal Knife Bracket 6grd-kB-10Bk Black 10” Metal Knife Bracket 6grd-kB-10Wh White 10” Metal Knife Bracket 6grd-kB-12BC Brite Chrome 12” Metal Knife Bracket 6grd-kB-12Bk Black 12” Metal Knife Bracket 6grd-kB-12Wh White 12” Metal Knife Bracket 6

PArT # deSCriPTion CTN QTYGRD-EA-S Support Arm For Metal Knife Bracket 4

PArT # deSCriPTion CTN QTYgrd-Sd-1BC Brite Chrome 1” Metal Slatwall Hook 12GRD-SD-4BC Brite Chrome 4” Metal Slatwall Hook 12

PArT # deSCriPTion CTN QTYGRD-SD-HF Brite Chrome Flush Metal Slatwall Hook 12

PArT # deSCriPTion CTN QTYgrd-h5-BC Brite Chrome 5 Hook Metal Bracket 3grd-h5-Bk Black 5 Hook Metal Bracket 3grd-h5-Wh White 5 Hook Metal Bracket 3

GARAGE ORGANIZATION

G-349

.67”

.89”

.63”.79”

End Cap

1.38”

.67” .83”

1.06”

.06”

Joint TrimMouldings

Also See ourAluminum and ABS Slatwall

See Pgs. 142-144

Dealer Program & Volume Discounts available, Please Inquire.

uniQue INTERLOCKING

DESIGN

BlackWhiteAlmond

Maple Woodgrain

Product Features• Strong & Durable.

• Easy to install with seamless construction.

• Color matching screws & mouldings available.

great Wall Panels

Material: PVCPanel Sizes: 1’ x 4’ or 1’ x 8’

3” on center11/16” Thick Panel

* Screws packed 100 pcs. per box

* Must be ordered in full boxes of 8 pcs. x 4 ft. or 4pcs. x 8 ft.* Must be ordered in full carton of 8 pcs.

x 4 ft. or 4pcs. x 8 ft.

Standard Duty- 25 lbs per Sq. Ft. load Capacityheavy Duty- 100 lbs per Sq. Ft. load Capacity

11/16”

PAneLSPArT # deSCriPTion

grW-1x4-Wh 1’ x 4’ White Great Wall PanelgrW-1x4-Bk 1’ x 4’ Black Great Wall PanelgrW-1x4-AL 1’ x 4’ Almond Great Wall PanelgrW-1x4-MP 1’ x 4’ Maple Great Wall PanelgrW-1x8-Wh 1’ x 8’ White Great Wall PanelgrW-1x8-Bk 1’ x 8’ Black Great Wall PanelgrW-1x8-AL 1’ x 8’ Almond Great Wall PanelgrW-1x8-MP 1’ x 8’ Maple Great Wall Panel

PAneLSPArT # deSCriPTion

grW-hd1x4-Wh 1’ x 4’ White Great Wall PanelgrW-hd1x4-Bk 1’ x 4’ Black Great Wall PanelgrW-hd1x4-AL 1’ x 4’ Almond Great Wall PanelgrW-hd1x4-MP 1’ x 4’ Maple Great Wall PanelgrW-hd1x8-Wh 1’ x 8’ White Great Wall PanelgrW-hd1x8-Bk 1’ x 8’ Black Great Wall PanelgrW-hd1x8-AL 1’ x 8’ Almond Great Wall PanelgrW-hd1x8-MP 1’ x 8’ Maple Great Wall Panel

MouLdingSPArT # deSCriPTion

GRW-JNR8-WH 8’ White Joint Trim For Great WallGRW-JNR8-BK 8’ Black Joint Trim For Great WallGRW-JNR8-AL 8’ Almond Joint Trim For Great WallgrW-Jnr8-MP 8’ Maple Joint Trim For Great WallGRW-END8-WH 8’ White End Cap For Great WallGRW-END8-BK 8’ Black End Cap For Great WallGRW-END8-AL 8’ Almond End Cap For Great WallgrW-end8-MP 8’ Maple End Cap For Great Wall

SCREWSPArT # deSCriPTion

grW-2500SCr-Wh 2-1/2”-L White Screw For Great WallgrW-2500SCr-Bk 2-1/2”-L Black Screw For Great WallgrW-2500SCr-AL 2-1/2”-L Almond Screw For Great WallgrW-2500SCr-MP 2-1/2”-L Maple Screw For Great Wall

GREAT WALL SLATWALL SYSTEM

G-350

Create your own custom storage with Rev-A-Shelf’s CSPD Series Acrylic Shelf Organizers. Two sizes, 166mm and 358mm, enables installation between shelves utilizing 32mm system holes.

Acrylic shelf storAGe

Adding functionality to your closet does not have to be complicated. This simple Shoe Rail System is easy to install and features Heavy-Gauge Chrome Rails. It is available in four different lengths, from 17” to 35”.

Keep your jewelry organized and in meticulous condition with the CJD Series jewelry drawer. The CJD-2414 system is easily installed with system holes and features full-extension ball bearing slides, and drawer head mounting capability. Used in coordination with the CJD-IS (Standard) and CJD-IN (Necklace) inserts customizing and care has never been easier. These unique insert designs give you the ability to store larger items like necklaces without tangling and the curved inside radius allows for full accessibility to small items such as earring backs. The CJD-IS and CJD-IN feature easy “drop-in” installation and a soft, velvet flocked covering that protects while providing a stylish background for your precious jewelry.

Four Clips included with every divider

PArt # DescriPtioN DiMeNsioNscsPD-6 Small Divider

w/Clips13-1/2” D x 6-9/16” T

x 1/4” ThickcsPD-14 Large Divider

w/Clips13-1/2” D x14-1/8 T

x 1/4” Thick

PArt # DescriPtioN DiMeNsioNscsr-17cr-10 17” Wire Shoe Rail 17” L x 2-1/4” Hcsr-23cr-10 23” Wire Shoe Rail 23” L x 2-1/4” Hcsr-29cr-10 29” Wire Shoe Rail 29” L x 2-1/4” Hcsr-35cr-10 35” Wire Shoe Rail 35” L x 2-1/4” H

PArt # DescriPtioN DiMeNsioNs fiNishcJD-2414 Drawer Box w/Slides 24” W x 14-3/4” D x 2-1/4” H BlackcJD-24is Jewelry Insert 22” W x 13” D x 1-1/2” H VelvetcJD-24iN Necklace Insert 22” W x 13” D x 1-1/2” H Velvet

cJD-DMB-Kit Door Mount Kit – Black

WOOD & ACRYLIC SHELF STORAGE

CHROME SHOE RAILS

JEWELRY DRAWER

G-351

DouBle wire hAMPer

5CHB-LINER

CH-241419-DM-2

tie rAcK

trc-14cr chrome finish

3” w x 14” D x 2” h

LOCK BUTTON

The Closet essential for all men, Rev-A-Shelf’s Chrome Tie/Belt rack is the obvious choice for keeping up with the important odds and ends. This all-in-one organizer features chrome pegs for up to 20 ties, five belts, four peg-closure beltsand a spacious tray for storing loose items like your wallet, change, watch, jewelry, etc. The TBC Series conveniently pulls out of the closet for easy access on full-extension slides and can be mounted on either the left or right side.

tie & Belt rAcK

• Economical plastic screw mount tie rack

• Holds up to 16 ties• Stay organized! Ties

remain in place until lever is pressed

SIMPLY PRESS IN LEVER TO

ADD OR REMOVE TIE

SHOWN IN BLACK

ALSO AVAILABLE IN CHOCOLATE PEARWOOD

has a 35% restock fee.

The CH-241419-DM-2 Premiere Closet Hamper is 24” W by 19” T and built using the same quality material as their immensely popular 5349 Series waste containers. It features removable double wire baskets, with 2.5 Bushels Capacity, 14” bottom mounted, full-extension slides, SOFT-CLOSE mechanism and is door mountable.

PArt # DiMeNsioNsch-241419-DM-2 24” W x 19” T x 14” D

5chB-liNer Cloth Liner

PArt # colortrc-eDi-BK Blacktrc-eDi-wh Whitetrc-eDi-cP Chocolate Pearwood

tBc-14tcr chrome finish 6”w x 14”D x 5”h

The Reverse Mounting Bracket is one of Rev-A-Shelf’s most versatile creations! Designed so you can utilize the unused space between the wall and the end of the run. The CRMB-12 works with the TRC Series tie rack or most other brands of tie/belt racks.

reverse MouNtiNG BrAcKet

crMB-12cr-5 chrome finish 3-3/4”w x 11”D

WIRE HAMPER, ACCESSORIES, TIE RACK

OPI INTRODUCES “EASY DOES IT” TIE RACK

NEW!

G-352

Rev-A-Shelf is pleased to introduce its innovative Wood Pant & Tie Racks. With three variations, the CWPR comes in a 24” or 30” width and provides space for up to eighteen standard or twelve Big & Tall pants. The CWTR tie rack can hold over 120 ties and the CWPTR features both a pant and tie rack that holds twelve pants and over thirty ties. These patent-pending pullout racks feature full-extension

Rev-A-Shelf’s re-designed Pull-Out Fan Pants Rack features left or right-handed mounting, which is extremely simple using closet system holes; chrome finish and unique details like rubber rings to keep pants from slipping and smooth ends to prevent snagging.

slides, rubber O-Rings to prevent slipping and removable pant rods for ease use. The three varia-tions are made from solid birch-maple and come with a lifetime warranty. Whether you are designing a custom closet or want a custom look, the CWTR provides you with both storage and style.

tie & Belt rAcK

wooD PANt & tie rAcK

Pull out fAN PANts rAcK

FINISH AVAILABLE IN WOOD

Keep your closet manageable and chaos free with Rev-A-Shelf’s Chrome Pull-Out Pants rack. This exceptional closet solution is made of heavy gauge steel with a chrome finish and features distinctive movable fingers for easy access and unparalleled convenience. The PSC Series is available in an 18” width holding 9 pairs of pants and a 24” width holding up to 13 pairs of pants.

Pull out PANts rAcK

FINISH AVAILABLE IN CHROME

The Closet essential for all men, Rev-A-Shelf’s Chrome Tie/Belt rack is the obvious choice for keeping up with the important odds and ends. This all-in-one organizer features chrome pegs for up to 20 ties, five belts, four peg-closure belts and a spacious tray for storing loose items like your wallet, change, watch, jewelry, etc. The TBC Series conveniently pulls out of the closet for easy access on full-extension slides and can be mounted on either the left or right side.

PArt # DescriPtioN DiMeNsioNscwtr-2414-1 24” Tie Rack 24” W x 14” D x 6” HcwPr-2414-1 24” Pant Rack 24” W x 14” D x 6” HcwPr-3014-1 30” Pant Rack 30” W x 14” D x 6” H

cwPtr-3014-1 30” Pant & Tie Rack 30” W x 14” D x 6” H

PArt # DiMeNsioNs fiNishtBc-14tcr 6” W x 14” D x 5” H Chrome

PArt # DescriPtioN DiMeNsioNsPsc-1814cr 9 Pant Capacity 17-1/2 -18-1/8” W x 14” D x 3” HPsc-2414cr 13 Pant Capacity 23-3/4” - 24-1/2” W x 14” D x 3” H

PArt # DescriPtioN DiMeNsioNs fiNishcPrf-16cr-52 Fan Pants Rack See Diagram Chrome

All Wood Items Are Carb Phase II Compliant.

TIE, BELT & PANTS RACKS

G-353

** fiNishes AvAilABle: chrome (cr), satin Nickel (sN) or oil rubbed Bronze

Close-ups are shown in Chrome (CR) and Oil Rubbed Bronze (ORB)

The Rev-A-Shelf CTMB Top Mount Brackets allow you to utilize the CB Series wire baskets in openings that are not the standard 18”, 24”, or 30” widths. Simply mount the brackets to the underside of a shelf and then attach the CB Series basket to the bracket.

FINISH AVAILABLE IN CHROME ctMB toP MouNt

Rev-A-Shelf introduces a breakthrough in design of Closet wire baskets and hampers. Not only did they give the

baskets sleek lines, they also engineered them to perform better than any other basket on the market. Their new patent-pending design installs easily in 32mm applications, and basket removal and re-installation has never been easier. Unlike other baskets on the market, their baskets rest on top of the slides, eliminating the torque twist that is common in other designs. Combine that with the bayonet mounting system and your can see why Rev-A-Shelf is the leader in new product innovation.

PArt # DiMeNsioNs

Pull-out BAsKets - 14” DeeP

cB-181407**-2 18” W x 14” D x 7” HcB-181411**-2 18” W x 14” D x 11” HcB-181418**-2 18” W x 14” D x 18” HcB-241407**-2 24” W x 14” D x 7” HcB-241411**-2 24” W x 14” D x 11” HcB-241418**-2 24” W x 14” D x 18” HcB-301407**-2 30” W x 14” D x 7” HcB-301411**-2 30” W x 14” D x 11” HcB-301418**-2 30” W x 14” D x 18” H


cB-181607**-2 18” W x 16” D x 7” HcB-181611**-2 18” W x 16” D x 11” HcB-181618**-2 18” W x 16” D x 18” HcB-241607**-2 24” W x 16” D x 7” HcB-241611**-2 24” W x 16” D x 11” HcB-241618**-2 24” W x 16” D x 18” HcB-301607**-2 30” W x 16” D x 7” HcB-301611**-2 30” W x 16” D x 11” HcB-301618**-2 30” W x 16” D x 18” H


cB-182011**-2 18” W x 20” D x 11” HcB-182018**-2 18” W x 20” D x 18” HcB-242011**-2 24” W x 20” D x 11” HcB-242018**-2 24” W x 20” D x 18” H

PArt # DescriPtioN DiMeNsioNsctMB-18 18” Top Mount Bracket Min. opening 18-1/2”ctMB-24 24” Top Mount Bracket Min. opening 24-1/2”ctMB-30 30” Top Mount Bracket Min. opening 30-1/2”

WIRE BASKETS

G-354

rouND closet roD suPPorts for 1-5/16” rouND roD

• Eight foot length• Wall thickness (5/64”)

AluMiNuM rouND 1-5/16” closet roD

• Screw Mount • 2-3/4” OD Size

• 5mm & 8mm Pins • 1-9/16” OD Size

• Designed to give extra support for longer spans.

Screws sold separately.Use #8 x 3/4” Flathead drywall screw, Part # SCR-8750FHZ, sold on page 267.

rouND 1-5/16” closet roD flANGe with PiNs

rouND ceNter roD suPPorts for 1-5/16” rouND roD

u-flANGe o-flANGe

Screws sold separately.Use #8 x 3/4” Flathead drywall screw, Part # SCR-8750FHZ, sold on page 267.

AluMiNuM ovAl 1-3/16 x 19/32” closet roD

• Eight foot lengths• Wall thickness 1/16”

ovAl closet roD suPPorts for 19/32” ovAl closet roD

• 25/32” x 1-15/16” Size

• Designed to give extra support for longer spans.

ovAl roD ceNter suPPorts for 15mm x 30mm ovAl roD

5mm PiN screw MouNt

Screws sold separately. Use #8 x 3/4” Flathead drywall screw, Part # SCR-8750FHZ, sold on page 267.

Screws sold separately. Use #8 x 3/4” Flathead drywall screw, Part # SCR-8750FHZ, sold on page 267.

PArt # fiNishs84-1516-sB Satin Brasss84-1516-sc Satin Chrome

s84-1516-orB Oil Rubbed Bronze

PArt # DescriPtioN fiNishs84P-1516u-sB U-Flange

w/Pins

Satin Brasss84P-1516u-sc Satin Chrome

s84P-1516u-orB Oil Rubbed Bronzes84P-1516o-sB O-Flange

w/Pins

Satin Brasss84P-1516o-sc Satin Chrome

s84P-1516o-orB Oil Rubbed Bronze

PArt # fiNishs84-1150cs-sB Satin Brasss84-1150cs-sc Satin Chrome

s84-1150cs-orB Oil Rubbed Bronze

PArt # fiNishs84-3015-sB Satin Brasss84-3015-sc Satin Chrome

s84-3015-orB Oil Rubbed Bronze

PArt # MouNtiNG fiNishs84-3015P-sB 5mm

Pins

Satin Brasss84-3015P-sc Satin Chrome

s84-3015P-orB Oil Rubbed Bronzes84-3015s-sB Screw

Mount

Satin Brasss84-3015s-sc Satin Chrome

s84-3015s-orB Oil Rubbed Bronze

PArt # fiNishs84-3015cs-sB Satin Brasss84-3015cs-sc Satin Chrome

s84-3015cs-orB Oil Rubbed Bronze

PArt # DescriPtioN fiNishs84-1516u-sB

U-FlangeSatin Brass

s84-1516u-sc Satin Chromes84-1516u-orB Oil Rubbed Bronzes84-1516o-sB

O-FlangeSatin Brass

s84-1516o-sc Satin Chromes84-1516o-orB Oil Rubbed Bronze

RESIDENTIAL GRADE CLOSET ROD & HARDWARE

G-355

s84-180wall Bracket left endProjection - 3-3/4"

s84-802NPNickel closet rod supportscrew type

s84-170wall Bracket right endProjection - 3-3/4"

s84-190wall Bracket centerProjection - 3-3/4"

s84-160hook

s84-161hook with Bar

s84-250ceiling Bracketend(Adj. Height)1-3/4" Base

s84-260ceiling Bracketcenter(Adj. Height)1-3/4" Base

3-1/4"Closed4-1/4"Opened

3-1/4"Closed4-1/4"Opened

s84-3015cs-BcProjection - 3”

1-1/8” x 9/16” (30mm x 15mm) ovAl eND cAP• Black CDPC with Chrome plated top.• 14 - 19 Gauge.

s58-3015-ch

steel ovAl 1-1/8” x 9/16” (30mm x 15mm) closet roD tuBiNG• Eight & ten foot lengths.• Polished chrome finish.• Use #6 flathead screws.

1-1/8” x 9/16” (30mm x 15mm) fittiNGs

toP MouNt:

For more tubing, see page 123

PArt # GAuGes84-320-8 20 gauges84-320-10 22 gauge

• Nickel Closet Rod Support 32mm System

steel rouND Brite chroMe 5/8” closet roD

• 4 foot lengths.

steel 5/8” u-flANGe for 5mm hole

PArt #s84-803NP

PArt # leNGthA1Bc 48”

STEEL TUBING FOR HANGRAIL,DISPLAYS OR CLOSET APPLICATIONS

G-356

• .080” Wall Thickness.• 1-5/16” Outside Diameter.• 6 Ft. Long Closet Rod.



• 6” L Scroll Bracket.

• Shelf/Hang Rod Bracket.

• Size: 11-5/8” W x 10-7/8” H• 12” Overall Depth

• 11-1/4” W x 8” H• Maximum Duty Shelf/Hang

Rod Bracket 500 lbs. Each Load Capacity.

• Deco Backet.• Size: 9” W x 9” H• 10” Overall Depth

• 2-1/2” O & U Flange Set For 1-5/16” Tube.

• O & U Flange Set For 1-5/16” Tube.


• End Cap For 1-5/16” Tube.

• Scroll Bracket.• Size: 8” W x 8” H.

• Shelf/Hang Rod Bracket.• Size: 12-13/16” W x 11” H.


• Maximum Duty Shelf/Hang Rod Bracket 500 lbs. Each Load Capacity.

• Size: 11-1/4” W x 8” H

• Scroll Bracket.• Size: 8” W x 8” H.


• End Caps For 1-5/16” Tube.

• Center Support For 1-5/16” Tube. • Maximum Duty Shelf/ Hang Rod

Bracket 500 lbs Each Load Capacity.

• 11-1/4” W x 8” H

• End Caps For 1-5/16” Tube.

BrAss fiNish BrusheD NicKel fiNish

BroNZe fiNish white ePoxy coAteD fiNish

s84-106-Br

s84-106-BN

s84-1150cs-BB

s84-0495-BN

s84-6146-BN

s84-505-Br

s84-8150-Br

s84-8152-Br

s84-505-BN s84-0017-BN

s84-106-BZ

s84-106-wh-6

s84-8091-wh s84-8091-BZ

s84-0495-BZ s84-505-BZ

s84-0017-BZ

s84-505-wh

s84-0495-wh

s84-0017-wh

s84-6150-wh

STEEL CLOSET ROD & HARDWARE

G-357

BoNussave time with this unique hole pattern

feature

coAt & hAt hooKs• 3” Projection• Matching screws included.

• 2-3/16” Projection• Matching screws included.

• Heavy Duty 4-1/2” O.D.• Brass: 3-3/4” Projection• satin Nickel: 3-9/16” Projection• Matching screws included.

PRODUCT FEATURES:• All new patent pending suspension rail makes quick

work of any installation.• The unique hole pattern allows the installer to quickly

locate all of the stud locations. Simply find the first stud, identify the hole and there will be a stud every time the pattern repeats.

• All metal brackets - cover sold separately.• 286 lb. carrying capacity per wall cabinet.• Left (l) or Right (r) brackets available, please specify when ordering.

White Almond Brown

Rail & Bracket Cover Colors:

PArt # fiNishch-37-Br Bright Brassch-37-ch Bright Chromech-37-sN Satin Nickel

PArt # fiNishch-38-Br Bright Brassch-38-sN Satin Nickel

PArt # fiNishch-39-Br Bright Brassch-39-ch Bright Chrome

susPeNsioN rAil & covers

PArt# DescriPtioNsus-r 8’ Suspension Rail

sus-c-wh White Rail Coversus-c-Al Almond Rail Coversus-c-Br Brown Rail Cover

susPeNsioN rAil BrAcKets & covers

PArt#(sPecify left or riGht) color

sus-B-(l or r) Rail Bracketsus-Bc-wh-(l or r) Bracket Cover-Whitesus-Bc-Al-(l or r) Bracket Cover-Almondsus-Bc-Br-(l or r) Bracket Cover-Brown

CLOSET ACCESSORIES

SUSPENSION RAIL & BRACKETS

G-358

Rev-A-Shelf’s Pull-Down Closet Rod is available in two sizes and features an adjustable rod length to accommodate openings from 18” to 26” (CPDR-1826), 26” to 35” (CPDR-2635) and 35” to 48” (CPDR-3548). The handle is adjustable to accommodate universal design and handicap accessible applications. This Closet Rod will pull down 33” and features a soft-closing mechanism, which will slowly draw the bar back to the upright position. Each unit has a 25 lb. weight capacity.

soft closiNG

Break away from the ordinary with Rev-A-Shelf’s Spiral Clothes Rack. This perfect corner closet solution has a 360º turning radius with an adjustable height of 72-1/2” to 84” and the ability to hand 40 single items of clothing from top to bottom. The SHR-3684 comes complete with a stabilizer bar, post and pivot hardware, and mounting hardware.

FINISH AVAILABLE IN CHROME w/ BLACK

PRODUCT FEATURES:• Side mounted• Telescoping Wardrobe rail will accommodate cabinet widths ranging from 32" to 46"• Constructed of Aluminum & Plastic• Set includes: mounting brackets,

clothes lifter, pull pole, wardrobe rail and screws

• 25 lb. load rating• Must hold the pull pole down for

easy access to clothes

in a chrome finish

PArt # DiMeNsioNscPDr-1826 18” - 26” WcPDr-2635 26” - 35” WcPDr-3548 35” - 48” W

PArt # DescriPtioN DiMeNsioNs fiNish

shr-3684 360° Spiral Clothes Rack

23” W x 72-1/2” - 84” H Chrome

s-lift7

w/Adjustable handle

OPI ECONOMY SERIES:“S-LIFT 7” Wardrobe Lift

SPIRAL CLOTHES RACK

PULL DOWN CLOSET ROD

G-359

RECESS MOUNT IRONING CENTER•Raisedpaneldooravailableinunfinishedoak,mapleorscratchresistantwhite.

•Comeswithastorageshelf,heatshield(forsafeironstorage),sleeveboard(n/aonwhiteunit),swivelironingboard,hookandcover&padset.•WorkswithEU-1electricalunit.•Allinstallationhardwareincluded.•16”Wx47-3/4”Hx7”Doutsidedimensions.•14-1/4”Wx46-1/4”Hx3-1/2”Dcutout.•Boarddimensions47-1/2”x11-1/2”.

Oak Maple White

FOLD OUT IRONING BOARDRev-A-Shelf’sunique

pull-outironingboardcanberetrofittedandfolds

awayneatlyintothespaceofadrawer.Simplyopen,unfold,andtheboardrises

automaticallywithalockingdevicethatkeepstheboardinplaceand

evenwiththecountertop.

CIB-16CR (Closet Model)

SURFACE AREA

WIDTH LENGTH 12” 29-3/8” 305mm 746mm

VIB-20CR (Vanity Cabinet) WIDTH LENGTH 12” 37-1/2” 305mm 953mm

PRODUCT DIMENSIONSCIB-16CR (Closet Model) WIDTH DEPTH14-1/4”-21” 16” 362-534mm 407mm

VIB-20CR (Vanity Cabinet) WIDTH DEPTH14-1/4”-21” 20” 362-534mm 508mm

ELECTRICAL UNIT w/LIGHT

REPLACEMENTS COVERS

•ULlisted.•Bulbnotincluded.• Includeslightfixture,plug&30minutetimer.•Workswithrecessed mountironingcentersonly.•Hardwireunit.

• WorkswithbothSurface&

RecessMount IroningCenters.

Plug

PRODUCT FEATURES:•Built-inmotionsensor•On/offswitch•3AAbatteriesincluded•Pivots

LIGHTING SPECIFICATIONS COLOR TEMPERATURE LUMINESCENCE

Average Rated For100,000Hours

COLOR LUMENSWarm White 27

3000K

CoolWhite

WarmWhite

PureWhite

Easy screw mount bracket (screws included)

Light stays on for 30 secondsonce motion is detected

No WiriNg required!

PART # FINISHIB-400 Oak

IB-400-MP MapleIB-420 White

PART # DESCRIPTION DIMENSIONS FINISHCIB-16CR 16”FoldOutIroningBoard 14-1/2-21”Wx16”Dx4”H Chrome

RAS-CIB-COVER-R-52 ReplacementCover(Closet) – SilverVIB-20CR 20”FoldOutIroningBoard 14-1/2”-21”Wx20”Dx4”H Chrome

RAS-VIB-COVER-52 ReplacementCover(Vanity) – Silver

PART #EU-1

PART # COLORCOV-815-SIL SilverCOV-825-GN GreenPatternCOV-835-BL BluePattern PART #

COLOR TEMP LENGTH

# OF LEDCHIPS

LED-MOTION WarmWhite 10” 9

IRONING CENTERS

NEW!Linear

Material: White Plastic w/

Frosted Lens Cover General DutyLight OutputGeneral DutyLight Output

LED MOTION CLOSET LIGHT

G-360

PULL OUT HAMPER WITH PLASTIC BIN

PULL OUT WIRE HAMPER

(NOTE: CAN BE DOOR MOUNTED WITH OUR #RV-DM-KIT)

(NOTE: CAN BE DOOR MOUNTED WITH OUR #RV-DM-KIT)

PULL OUT POLYMER HAMPER/UTILITY BASKET(NOTE: CAN BE DOOR MOUNTED WITH OUR #RV-DM-KIT)

Full extension slides

Full extension slides

PULL-OUT OR DOOR MOUNT HAMPER W/LIDIndividual Pack Contains:(1) hamper basket, full extension slides and instructions. Fully Assembled.

PART # COLOR DESCRIPTION WEIGHTHPRV-1520-S White 14-1/4” W x 20” D x 19-1/4” H 12 lbs.

PART # COLOR DESCRIPTION WEIGHTHRV-1215S White 11-7/8” W x 18” D x 14-3/4” H 12 lbs.HRV-1220S White 11-7/8” W x 18” D x 19-3/8” H 13 lbs.HRV-1515S White 14-3/4” W x 18” D x 14-3/4” H 13 lbs.HRV-1520S White 14-3/4” W x 18” D x 19-3/8” H 14 lbs.

PART # DESCRIPTIONWEIGHT PER

CARTON

HURV-1512S1.37 cu. ft. utility basket with

frame and full extension slides.14-1/4” W x 11-7/8” H x 18” D.

10 lbs.

HUB-470X8-52 1.37 Cu. Ft. Replacement Basket –

5345-DM-KIT-52 Door Mount Extenders –

PART # DESCRIPTION WEIGHT

PULL-OUT HPRV-1925S19-7/8"W (505mm)

26"H (661mm) 14"D (356mm)

12 lbs.

DOOR MOUNT HPRV-1925DM-S

19-7/8”W (505mm) 26"H (661mm) 14"D (356mm)

13 lbs.

BATHROOM VANITY PULL OUT HAMPERS

G-361

Rev-A-Shelf announces the NEW 3000 Series Stemware & Wine Bottle Racks. The entire collection has been redesigned to provide both durability and elegance, featuring new heavy gauge wire construction and a hidden mounting plate. Ideal for showcasing wine and glass collections. Available in three finishes traditional Chrome, stylish Satin Nickel & beautiful Brass.

3150-11CR 3150-11SN 3150-11BR

3250SN 3250BR

3450-11SN 3150-11CR & 3250BR3450-11CR

Uses: Bars, Kitchens, China Cabinets,

Wall Systems

Clear Acrylic • 8 Ft. Lengths

PART #1120-CL

PART NUMBER DIMENSIONS FINISH

11” STEMWARE

HOLDER

3150-11CR 4-1/4” W x 11” D x 1-1/2” H Chrome3150-11SN 4-1/4” W x 11” D x 1-1/2” H Satin Nickel3150-11BR 4-1/4” W x 11” D x 1-1/2” H Brass

16” STEMWARE

HOLDER


3150-16ORB 4-1/4” W x 16” D x 1-1/2” H Bronze

18” STEMWARE

HOLDER


3150-18ORB 4-1/4” W x 18” D x 1-1/2” H Bronze

DOUBLE BOTTLE RACK

3250CR 4-1/4” W x 9” H x 5/8” Thick Chrome3250SN 4-1/4” W x 9” H x 5/8” Thick Satin Nickel3250BR 4-1/4” W x 9” H x 5/8” Thick Brass

3250ORB 4-1/4” W x 9” H x 5/8” Thick Bronze

11” QUAD STEMWARE

HOLDER

3450-11CR 17” W x 11” D x 1-1/2” H Chrome3450-11SN 17” W x 11” D x 1-1/2” H Satin Nickel3450-11BR 17” W x 11” D x 1-1/2” H Brass

3450-11ORB 17” W x 11” D x 1-1/2” H Bronze

STEMWARE AND WINE RACK COLLECTION

STEMWARE HOLDER

G-362

•Availablein30”,36”and42”widths.• BothstylesareavailableinunfinishedOak,MapleandCherry.

•Metallinerincluded.• Installationinstructionsincluded.• ChimneyblowersandDuctkitssoldseparately.•Chimneycanbetrimmedtofitdifferentheights.•Alder&HickoryAvailable-Pleaseinquire.

MANUAL VENTILATOR

Straight Style

Arched Style

CHIMNEY(Sold

Separately) CHIMNEY(Sold

Separately)

DUCTWORK KIT

Designed for use with VENT07 &VENT08

• Availablein36”&42”widths.• Chimneyallowsfor12”oftrim.• Silvermetalliclinerincluded.• Alderavailable,pleaseinquire.

• 500CFM/8.2sones• StainlessSteelfinish• 2x20watthalogenlamps• Pushbuttoncontrols• Quietcentrifugalblower• Heatsensordetectsexcessiveheat&adjustsautomatically

ARCHED STYLEPART # SPECIES HEIGHT

TOTAL WIDTH

HOOD WIDTH DEPTH

SARAN30-OAK Oak 24-7/8” 32-3/8” 30” 19”SARAN30-MP Maple 24-7/8” 32-3/8” 30” 19”SARAN30-CH Cherry 24-7/8” 32-3/8” 30” 19”



STRAIGHT STYLEPART # SPECIES HEIGHT

TOTAL WIDTH

HOOD WIDTH DEPTH

SSRAN30-OAK Oak 22-7/8” 32-3/8” 30” 20-3/16”SSRAN30-MP Maple 22-7/8” 32-3/8” 30” 20-3/16”SSRAN30-CH Cherry 22-7/8” 32-3/8” 30” 20-3/16”



CHIMNEYPART # SPECIES WORKS WITH HEIGHT WIDTH DEPTH

CHI-30-OAK Oak SARAN30*, SSRAN30* 23-1/2” 11-7/16” 9-11/16”CHI-30-MP Maple SARAN30*, SSRAN30* 23-1/2” 11-7/16” 9-11/16”CHI-30-CH Cherry SARAN30*, SSRAN30* 23-1/2” 11-7/16” 9-11/16”

CHI-36-OAK Oak SARAN36*, SSRAN36* 23-1/2” 17-7/16” 9-11/16”CHI-36-MP Maple SARAN36*, SSRAN36* 23-1/2” 17-7/16” 9-11/16”CHI-36-CH Cherry SARAN36*, SSRAN36* 23-1/2” 17-7/16” 9-11/16”

CHI-42-OAK Oak SARAN42*, SSRAN42* 23-1/2” 23-7/16” 9-11/16”CHI-42-MP Maple SARAN42*, SSRAN42* 23-1/2” 23-7/16” 9-11/16”CHI-42-CH Cherry SARAN42* SSRAN42* 23-1/2” 23-7/16” 9-11/16”

PART # SPECIES HEIGHT WIDTH DEPTHARAN36-OAK Oak 46” 36” 19”ARAN36-MP Maple 46” 36” 19”ARAN36-CH Cherry 46” 36” 19”

ARAN42-OAK Oak 46” 42” 19”ARAN42-MP Maple 46” 42” 19”ARAN42-CH Cherry 46” 42” 19”

DUCTKIT

VENT07

P R O D U C T S

ARTISAN STYLE RANGE HOODS

SIGNATURE SERIES WOOD RANGE HOODS

G-363

•Availablein30”or36”widths.•ClassicstyleavailableinunfinishedAlder,unfinishedRedOak,unfinishedMapleorunfinishedCherry.

•Sandedandreadytofinish.•Producedusingtopqualityhardwoodsand“A”gradeveneers.

•Simpleinstallationinstructionsincluded.•MetallicSilverLinerincluded.•Ventilatorssoldseparately.•Attractiveprofessionalappearance.•Veryquietoperation.•Simplefilterremoval/cleaning.•3yearwarranty.• OmegaseriessuppliedwithGalleyRailpackage.

Designed for use with VENT07 & VENT08

MANUAL VENTILATOR• 390CFM• SilverMetallicfinish• 2x40wattlamps• Quietcentrifugalblowerwith3-Speedslidecontrol• Heatsensordetectsexcessiveheat&adjustsautomatically

CLASSIC SERIESPART # SPECIES WIDTH HEIGHT DEPTH

CLARAN30-RO RedOak 30” 23-1/2” 8-5/16”CLARAN30-MP Maple 30” 23-1/2” 8-5/16”CLARAN30-CH Cherry 30” 23-1/2” 8-5/16”CLARAN30-AL Alder 30” 23-1/2” 8-5/16”CLARAN36-RO RedOak 36” 23-1/2” 8-5/16”CLARAN36-MP Maple 36” 23-1/2” 8-5/16”CLARAN36-CH Cherry 36” 23-1/2” 8-5/16”CLARAN36-AL Alder 36” 23-1/2” 8-5/16”

OMEGA SERIESPART # SPECIES HEIGHT WIDTH DEPTH

OMERAN30-RO RedOak 24” 30” 7-1/4”OMERAN30-MP Maple 24” 30” 7-1/4”OMERAN30-CH Cherry 24” 30” 7-1/4”OMERAN30-AL Alder 24” 30” 7-1/4”OMERAN36-RO RedOak 24” 36” 7-1/4”OMERAN36-MP Maple 24” 36” 7-1/4”OMERAN36-CH Cherry 24” 36” 7-1/4”OMERAN36-AL Alder 24” 36” 7-1/4”

DUCTWORK KIT

DUCTKIT

VENT08

P R O D U C T S

WOOD CANOPY RANGE HOODS

G-364

Spice Rack ModulaR Spice Rack

plate diSplay unit

Wood Spice dRaWeR inSeRt

clear natural Maple Finish w/adjustable Bar

approx. 5” opening from bottom to

top shelf

• Designed to hold even large jars.• Manufactured from maple plywood.• Can be trimmed to size.• 8” Deep x 19” Wide x 10” Tall.• Clear finish.• Simply screws into cabinet back.

• Designed for storage of all types of spice jars. • Produced from Baltic Birch plywood finished

with a durable UV coating.• Four widths available, easily trimmed to

desired size.• Boxed individually.• 2" Height - 19" Depth.

Display treasured china in a fully assembled unit with a tasteful moulding shape and dowels of the same species. Mouldings have trim area of 1-1/2” on each end. Dowels spaced 2” on center.

13-1/16” High x 3/4” Wideplate display unit

note: 3 center dowels on all units are removable for cleaning purposes. they are sent unassembled.

Red oak, cherry or Maple

paRt # SiZeSRW-8 8-3/4"W x 7-1/2"H x 3-1/2"DSRW-11 11-3/4"W x 7-1/2"H x 3-1/2"D

paRt # SiZeMSR-1910 19” W x 10” H

paRt # FiniSH SiZepd-30-Ro Red Oak 30” Lpd-30-Mp Maple 30” Lpd-30-cH Cherry 30” Lpd-36-Ro Red Oak 36” Lpd-36-Mp Maple 36” Lpd-36-cH Cherry 36” L

paRt # WidtHSdi-1319 13"Sdi-1619 16"Sdi-1919 19"

P R O D U C T S

KITCHEN STORAGE

G-365

"tRa-Sta" oRGaniZeR

deep Bin SupeR SuSan

• The perfect solution for cookie sheets, baking trays and muffin pans.

• Four pre-finished maple veneer dividers slide in grooved and pre-drilled top and bottom rails.

• Rails designed to be fastened in multiple locations to accept a variety of pots, pans or lids.

• Easily trimmable to fit any size cabinet.• Dividers: 23-3/4"W x 23-3/4"H, Rails: 3/4"W x 24"L.• Dividers are easily removed for simple cleaning of

the cabinet.• Includes 4 finished dividers and 8 drilled rails.

"tRa-Sta" deep dRaWeR kit

Select Spice SuSan

• Modular & Adjustable allow for organization of pots, pans, lids or plates.

• Three pre-finished 11” x 24” maple dividers.

• 6 pre-drilled mounting rails.• Easily trimmable for

various drawer depths.

PRODUCT FEATURES:• Single shelf unit with bearing.• Solid maple rim.• 12mm multi-directional plywood shelf.• Works great for pots and pans, kitchen appliances & bulk items.• 6" high lip, 30" diameter.• 450 lb. weight capacity.• Cast aluminum bearing featuring ultra smooth movement.

PRODUCT FEATURES:• Fits perfectly in 12"

cabinets.• 1" lip.• Perfect for spices.• Plywood core.• Includes bearing with rubber feet.• Can be moved from cabinet to work area/ no attachment to shelf needed.

paRt #tS-2424

paRt #tS-ddk

paRt # deScRiptionSdFS-30 30" Pie Cut

paRt # deScRiptionSSF-10 10" Spice Susan Single Shelf

P R O D U C T S

KITCHEN STORAGE SOLUTIONS

G-366

REV-A-LOCK™ SECURITY SYSTEM

• Concealed • ChildproofOur Rev-A-Lock™ Security System is a world patented catch & key component system designed to combine the security of a lock with the simplicity of a catch. A magnetic “key” placed on the cabinet door releases the catch. When the magnet is removed, the catch springs back - so when the door is closed...it stays that way.

INSTALLATION INSTRUCTIONS INCLUDED

The lock will install on thicknesses of ½” to 1-9/16” and operate through wood, glass, metal and particle board.All locks are now stan-dard with the patented unlocking device, which enables you to disable the lock for extended periods of time and the extension slug for ap-plications now up to 1-9/16” thick.

CONTAINS: Lifting mechanism only; which locks in both open & closed positions.

21-3/4” depth of swing motion.17-1/8” clearance height of working area when not in use.For 19-1/2” frame cabinets & 20-7/8” frameless cabinets.NEW CHROME FINISHNOTE: Rev-A-Lift requires a full height cabinet in order to come all the way to countertop height. This means no drawer (see drawings below). - SHELF IS NOT INCLUDED.

RECOMMENDED SPRING POSITION FOR VARYING MIXER WEIGHT

0-20 lbs. = 120-30 lbs. = 230-60 lbs. = 3

A Remarkable Unique Idea For Cabinet Safety

PART # DESCRIPTIONSET PER CARTON

WEIGHT PER CARTON

OPL-201 Lock Assembly 25 5.4 lbs.OPL-202 Magnetic Key 25 2.8 lbs.

PART # DESCRIPTION WEIGHTRAS-ML-HDCR Heavy Duty Mixer/Appliance

Lift w/ Built in Shock Dampers 7 lbs.

CABINET SECURITY PRODUCTS

REV-A-LIFT

G-367

FALSE FRONT TIP-OUT TRAY WITH STOPSMOLDED POLYMER TIP-OUT TRAYS

CONTAINS: 2 trays per set, trays w/tabs on both ends.

CONTAINS: Each set has 1 standard and 1 accessory tray and 2 pair of “SELF-HOLDIN”® hinges.Note: For use with 2 fronts on sink base cabinet.

CONTAINS: 36” (915mm) extruded tray, hinges, end caps, adhesive, per pack number.Custom cut trays to length & glue end caps on with Rev-A-Glue (included).

2-1/8” Deep, 3” High in back,1-1/4” High in front

Can be used for either frameless or framed cabinet applications. Opening angle can be adjusted from 45°-90°

FALSE FRONT TIP-OUT TRAY SYSTEM (Std/Acc)

36” TRAY W/HINGES & END CAPS

• Each Polished Stainless Steel Tip-Out Tray comes with a pair of Rev-A-Shelf’s patented Self-Holdin® hinges.

PART # COLOR DESCRIPTIONSET PERCARTON

WEIGHT PERCARTON

6562-11-11-52 White 11” Trays w/Tab Stops (280mm) 1 set .9 lbs.6562-11-15-52 Almond 11” Trays w/Tab Stops (280mm) 1 set .9 lbs.6562-14-11-52 White 14” trays w/Tab Stops (360mm) 1 set 1.1 lbs.6562-14-15-52 Almond 14” Trays w/Tab Stops (360mm) 1 set 1.1 lbs.


WEIGHT PER CARTON

6572-11-11-52 White 11” std/Acc Trays (280mm) 1 set 2 lbs.

6572-11-15-52 Almond 11” std/Acc Trays (280mm) 1 set 2 lbs.

6572-14-11-52 White 14 1/4” std/Acc Trays (362mm) 1 set 2.3 lbs.

6572-14-15-52 Almond 14 1/4” std/Acc Trays (362mm) 1 set 2.3 lbs.


WEIGHT PER CARTON

6551-36-11-52 White 1 Tray - 2 pr. Hinges & End Caps 1 set 2 lbs.

6551-36-15-52 Almond 1 Tray - 2 pr. Hinges & End Caps 1 set 2 lbs.

6551-36-11-50 White 1 Tray - 1 pr. Hinges & End Caps 1 set 1.5 lbs.

6551-36-15-50 Almond 1 Tray - 1 pr. Hinges & End Caps 1 set 1.5 lbs.

PART # DESCRIPTION

6552-ETH-10 Euro HingeFalse Front Hinge

PART # DESCRIPTION6581-10-52 10” Tray (250mm)6581-11-52 11-1/4” Tray (280mm)6581-13-52 13” Tray (330mm)6581-14-52 14-1/4” Tray (360mm)6581-16-52 16” Tray (400mm)6581-19-52 19” Tray (480mm)6581-22-52 22” Tray (559mm)6581-25-52 25” Tray (635mm)6581-28-52 28” Tray (711mm)6581-31-52 31” Tray (788mm)

POLISHED STAINLESS STEELTIP-OUT TRAYS

CHROME PLATEDEURO HINGES

SINK FRONT (TIP-TOP) TRAY PRODUCTS

EXTRUDED TIP-OUT TRAYS

G-368

WOOD SPICE DRAWER INSERT

• Contains one wood tray insert that can be customized for various drawer sizes.

COMBINATION KNIFE HOLDER/CUTTING BOARD

• Contains knife rest, cutting board, full extension Accuride slides, mounting hardware and screws (knives not included).

WOOD KNIFE BLOCK WITH DIVIDERSRev-A-Shelf’s unique 4WKB-1 Knife Block Tray Insert is out of the box ready at 18-1/2” x 22” providing 19 slots to store knives and has a separate compartment for other utensils.

PART # DIMENSIONS4SDI-18 16” W x 19-3/4” L x 1-1/2” D4SDI-24 22” W x 19-3/4” L x 1-1/2” D

PART # DIMENSIONS4KCB-18 14-1/2” W x 22-3/4” L x 4-3/4” H4KCB-21 17-1/2” W x 22-3/4” L x 4-3/4” H4KCB-24 20-1/2” W x 22-3/4” L x 4-3/4” H

PART # DIMENSIONS4WKB-1 18-1/2” W x 22” L x 2-7/8” H

All Wood Items Are Carb Phase II Compliant.CUTLERY TRAYS

G-369

RT10-* RT12-* RT14-* RT18-*

• All cutlery trays are made of rubberized polystyrene to allow easy trimming for a perfect fit in any drawer. This single drawer insert is available in white or almond colors.

• All tray heights are 2-3/8”

SPECIFICATION: DRAWER CLEARANCEShallow System Requires 3-1/8” mi. clearance Base is 1-5/8” deep

Deep System Requires 4-1/8” mi. clearance Base is 2-7/16” deep

Top Rolling Tray

Base Tray

3-1/8” (80mm)1-5/8”

(42mm)

Top Rolling Tray

Base Tray

4-1/8”

2-7/16”

BONUS TRIMMABLE

Increase space in kitchen drawers with Rev-A-Shelf’s rolling tray system.The following notes apply to all rolling tray systems:• For the full cutlery tray systems to

provide adequate accessibility to the utensils in the lower tray, a portion of the drawer back must be removed. No depth trimming of the lower utility tray will be necessary.

• Minimum height refers to the cabinet drawer opening, not just the depth of the drawer.

• Rolling tray systems are available in a glossy white finish only.• Made of heavy gauge Polystyrene.• Features a removable rolling cutlery tray.

CT-2W-10 CT-4W-10CT-1W-10 CT-3W-10

SHALLOW TRAY SYSTEM 3-1/8” HIGHPART # TRAY SIZE MINIMUM TRIMRT10-3F 11-3/4” W x 21-1/4” D 8-3/4” W x 21-1/4” DRT12-3F 14-1/2” W x 21-1/4” D 11-3/4” W x 21-1/4” DRT14-3F 17-3/4” W x 21-1/4” D 14-3/4” W x 21-1/4” DRT18-3F 21-3/4” W x 21-1/4” D 17-3/4” W x 21-1/4” D

DEEP TRAY SYSTEM 4-1/8” HIGHPART # TRAY SIZE MINIMUM TRIMRT10-4F 11-3/4” W x 21-1/4” D 8-3/4” W x 21-1/4” DRT12-4F 14-1/2” W x 21-1/4” D 11-3/4” W x 21-1/4” DRT14-4F 17-3/4” W x 21-1/4” D 14-3/4” W x 21-1/4” DRT18-4F 21-3/4” W x 21-1/4” D 17-3/4” W x 21-1/4” D

PART # COLOR TRAY DIMENSIONS MINIMUM TRIM SIZECT-1A-10 Almond 11-1/2” W x 21-1/4” D 8-5/8” W x 17-3/4” DCT-1W-10 White 11-1/2” W x 21-1/4” D 8-5/8” W x 17-3/4” DCT-2A-10 Almond 14-1/4” W x 21-1/4” D 11-5/8” W x 17-3/4” DCT-2W-10 White 14-1/4” W x 21-1/4” D 11-5/8” W x 17-3/4” DCT-3A-10 Almond 17-1/2” W x 21-1/4” D 14-3/4” W x 17-3/4” DCT-3W-10 White 17-1/2” W x 21-1/4” D 14-3/4” W x 17-3/4” DCT-4A-10 Almond 21-7/8” W x 21-1/4” D 18-3/8” W x 17-3/4” DCT-4W-10 White 21-7/8” W x 21-1/4” D 18-3/8” W x 17-3/4” D

ROLLING TRAY SYSTEM

CUTLERY TRAYS

G-370

• All utility trays are made of rubberized polystyrene to allow easy trimming for a perfect fit in any drawer.• All tray heights are 2-3/8”.

UT-*-52

UT-1011-1/2”293mm

21-1

/4” (

540

mm

)

Min. Trim Size8-5/8” x 17-3/4”

219 mm x 451 mm

UT-1214-3/4”362 mm

21-1

/4” (

540

mm

)

Min. Trim Size11-5/8” x 17-3/4”

296 mm x 451 mm

UT-1517-1/2”445 mm

21-1

/4” (

540

mm

)

Min. Trim Size14-3/4” x 17-3/4”

375 mm x 451 mm

UT-1821-7/8”556 mm

21-1

/4” (

540

mm

)

Min. Trim Size18-3/8” x 17-3/4”

467 mm x 451 mm

• Keep spices conveniently stored in a drawer with this tiered configuration polymer spice tray. Trays are 50” x 21” trimmable to any size.

• Universal Spice Trays are best utilized with 22” slides for maximum accessibility.• Need a minimum of 4-1/2” clearance for height.

NOTE: All polymer bread drawer cover kits includes 1 cover, 1 pair rails and screws. Cover is textured to hide scratches. Can be trimmed to accommodate any drawer dimension.

ST50-21WH

BDC-24-11BDC-200-20 PART # COLOR MAXIMUM DIMENSIONS MINIMUM DRAWER SIZE

BDC-200-15 Almond 16-3/4” W x 21-3/4” L 11-5/8” x Any LengthBDC-200-11 White 16-3/4” W x 21-3/4” L 11-5/8” x Any LengthBDC-200-20 Translucent 16-3/4” W x 21-3/4” L 11-5/8” x Any LengthBDC-24-15 Almond 20-1/8” W x 21-3/4” L 16-1/16” x Any LengthBDC-24-11 White 20-1/8” W x 21-3/4” L 16-1/16” x Any LengthBDC-24-20 Translucent 20-1/8” W x 21-3/4” L 16-1/16” x Any Length

PART # COLOR TRAY DIMENSIONS MINIMUM TRIM SIZEUT-10A-52 Almond 11-1/2” W x 21-1/4” D 8-5/8” W x 17-3/4” DUT-10W-52 White 11-1/2” W x 21-1/4” D 8-5/8” W x 17-3/4” DUT-12A-52 Almond 14-1/4” W x 21-1/4” D 11-5/8” W x 17-3/4” DUT-12W-52 White 14-1/4” W x 21-1/4” D 11-5/8” W x 17-3/4” DUT-15A-52 Almond 17-1/2” W x 21-1/4” D 14-3/4” W x 17-3/4” DUT-15W-52 White 17-1/2” W x 21-1/4” D 14-3/4” W x 17-3/4” DUT-18A-52 Almond 21-7/8” W x 21-1/4” D 18-3/8” W x 17-3/4” DUT-18W-52 White 21-7/8” W x 21-1/4” D 18-3/8” W x 17-3/4” D

PART # COLOR TRAY SIZEST50-21A-52 Almond 50” W x 21” DST50-21W-52 White 50” W x 21” D

UTILITY TRAYS

UNIVERSAL SPICE TRAYS

BREAD DRAWER COVERS

G-371

WOOD CUTLERY TRAYS• Both of the wood cutlery trays are trimmable to fit.

TRIMMABLE UTILITY TRAY INSERT

Organize kitchen drawers with Rev-A-Shelf’s new Wood Utility Try Insert. The WUT Series is made of classic birch/maple hardwood with a UV-cured clear finish to ensure an acceptable match to any kitchen cabinet. This modern day clutter solution requires a simple drop-in installation with two sizes that may be trimmed to fit.

• Smaller height for shallow drawers.

Note: Our door storage trays are packaged with screw-in clips. Mounting standards are separate - Part # 6232-26-4528-52

2 & 5 SHELF SETS WITH CLIPS DOOR STORAGE SHELF SETS

PART # TRAY SIZE

4WCT-1 14-5/8” W (min trim 8-3/4”) x 22 L (min trim 15-1/2”) x 2-7/8” H

4WCT-3 20-5/8” W (min trim 14-3/4”) x 22 L (min trim 15-1/2”) x 2-7/8” H

4WCT-1SH 14-5/8” W (min trim 8-3/4”) x 22 L (min trim 15-1/2”) x 2-3/8” H

4WCT-3SH 20-5/8” W (min trim 14-3/4”) x 22 L (min trim 15-1/2”) x 2-3/8” H


WEIGHT PER

CARTON6232-08-11-52 White 7-7/8” (200mm) Wide Polymer w/ Screw-In Clips 1 1 lbs.6232-08-15-52 Almond 7-7/8” (200mm) Wide Polymer w/ Screw-In Clips 1 1 lbs.6232-14-11-52 White 13-3/4” (349mm) Wide Polymer w/ Screw-In Clips 1 2 lbs.6232-14-15-52 Almond 13-3/4” (349mm) Wide Polymer w/ Screw-In Clips 1 2 lbs.6232-20-11-52 White 19-3/4” (502mm) Wide Polymer w/ Screw-In Clips 1 3 lbs.6232-20-15-52 Almond 19-3/4” (502mm) Wide Polymer w/ Screw-In Clips 1 3 lbs.6235-08-11-52 White 7-7/8” (200mm) Wide Polymer w/ Screw-In Clips 1 2.4 lbs.6235-08-15-52 Almond 7-7/8” (200mm) Wide Polymer w/ Screw-In Clips 1 2.4 lbs.6235-14-11-52 White 13-3/4” (349mm) Wide Polymer w/ Screw-In Clips 1 4 lbs.6235-14-15-52 Almond 13-3/4” (349mm) Wide Polymer w/ Screw-In Clips 1 4 lbs.6235-20-11-52 White 19-3/4” (502mm) Wide Polymer w/ Screw-In Clips 1 5 lbs.6235-20-15-52 Almond 19-3/4” (502mm) Wide Polymer w/ Screw-In Clips 1 5 lbs.

6232-26-4528-52 Aluminum 26” Mounting Standards 1 1lbs.

PART # DIMENSIONS4WUT-1 18-1/2” W x 22” D x 2-7/8” H4WUT-3 24” W x 22” D x 2-7/8”H

4WUT-1SH 18-1/2” W x 22” D x 2-3/8” H4WUT-3SH 24” W x 22” D x 2-3/8” H

All Wood Items Are Carb Phase II Compliant.DOOR & CABINET ORGANIZERS

G-372

Top shelves are 2-3/8” D; Bottom Shelf is 4-1/8” D -

21-3/8” H

DOOR MOUNT SPICE RACKS

PULL OUT TOWEL BARPULL OUT TOWEL BAR CONTAINS: 1- pull out towel bar, 3 prong model with 12” (305mm) extension with mounting screws. 5” width (127mm) x 17-3/4” depth (451mm) x 1-1/4” (32mm).

CONTAINS: Tray divider with three (3) screw-in clips & fasteners per set. Both trays dividers are 20” deep (508mm).

TRAY DIVIDERS W/CLIPS

TOWEL HOLDER CONTAINS: Towel holder w/mounting screws. 12-3/4” width (324mm) x 3-1/2” depth (89mm) x 6-1/2” height (165mm).

TOWEL HOLDER

TOWEL HOLDER

CONTAINS: 1- pull out towel bar, 2 prong model, easy glide ball bearing slide with mounting screws. 3-7/8”W x 12-7/8”D x 1-1/2”H

U-SHAPED TRAY DIVIDERS

W/SCREWS

TRAY DIVIDER/FOIL WRAP HOLDERBaking storage has never been more versatile than with the 447 Pullout Organizer. Designed for 9” and 12” base cabinets, these organizers feature two compartments for storing baking sheets and platters and the removable center racks allow you the ability to store larger platters and bake ware if desired. The unit is made from maple and glides on our patented “tri-slides” for stability. Door mounting is a breeze with our patented door mount brackets that provide up to 5 inches of flexibility for trouble free installation on any door style.

PART # DESCRIPTIONSET PERCARTON

WEIGHT PER CARTON

565-10-52 10 5/8” Width Spice Rack (270mm) 1 2.2 lbs.

565-14-52 13 5/8” Width Spice Rack (346mm) 1 2.4 lbs.

PART # DESCRIPTIONSET PERCARTON

WEIGHT PER CARTON

563-47 3 Prong Towel Bar-White 1 2 lbs.

563-47C 3 Prong Towel Bar-Chrome 1 2 lbs.

PART # COLOR DESCRIPTIONWEIGHTPER PC.

597-12-10 White 12” High Tray Dividers (305mm) 2 lbs.597-12CR-10 Chrome 12” High Tray Dividers (305mm) 2 lbs.

597-18-10 White 18” High Tray Dividers (457mm) 2 lbs.597-18CR-10 Chrome 18” High Tray Dividers (457mm) 2 lbs.


WEIGHT PER CARTON

563-32 Towel Holder, White 1 .4 lbs.563-32C Towel Holder, Chrome 1 .4 lbs.


WEIGHT PER CARTON

563-51-C 2 Prong Towel Bar-Chrome 1 2.6 lbs.

PART # DIMENSIONS FINISH

WEIGHT PER

CARTON596-10CR-52 3”W x 11-7/8”D x 10”H Chrome 2 lbs.

PART # DESCRIPTIONWEIGHT

PER CARTON447-BC-5C 5” Foil Wrap Holder/Tray Divider 25 lbs.447-BC-8C 8” Foil Wrap Holder/Tray Divider 32 lbs.

All Wood Items Are Carb Phase II Compliant.DOOR & CABINET ORGANIZERS

G-373

Revolutionize the way you store your pots, pans, and lids with the Two-Tier Cookware Organizer. The 5CW2 features independently operating shelves that accommodate a

COOKWARE ORGANIZER

variety of cookware sizes and brands. The top tier organizes lids and the bottom tier features adjustable dividers to store a variety of larger pots and pans. These beautiful organizers are designed for Base 15 or 24 cabinets. They are made with a heavy-duty chrome plated wire frame and feature 100 lbs. rated full extension ball-bearing slides. The bottom, side and rear mounting provide you the sturdiness you expect and easy installation. Door mounting is also an option with the RV Series Door Mounting Kit.

PART # CABINET WIDTH DEPTH HEIGHT WEIGHT5CW2-1222-CR BASE 15 11-3/4”

(299mm)22”

(559mm)18”

(457mm) 29 lbs.

5CW2-2122-CR BASE 24 20-3/4”(527mm)

22”(559mm)

18-1/8”(460mm) 39 lbs.

RVDM17KIT --- --- --- ---- 2 lbs.

PREMIER CHROME WIREKITCHEN STORAGE

G-374

Our 548-06 system makes storing 2 liter bottles simple and accessible. This system is designed for base 9 cabinets.• Features universal brackets for right or left hand mounting.• Ball Bearing slides and a door mountable wire frame in

white or chrome.

2”(51mm)

4”(102 mm)

19-3/8”(492 mm)5-1/2”

(492 mm)

19-1/2”(496 mm)

548-06CR

PULL-OUT ORGANIZERS (side mount)5432-05CR - Turn that small space found in a base 9 cabinet into useful storage with this new modern, 2 shelf pull out. It is designed with aluminum shelves and chrome rails. This sleek organizer features a bottom bracket and an adjustable side mount bracket to provide unparalleled stability. This system has a door mountable frame and comes with full extension soft close slides.

5432-05CR

Bottom Bracket

Side Bracket

UNDER SINK CHROME BASKETCleaning just got easier with the Under Sink Caddy. Now you can store multiple cleaning items in one place and carry them with you with the removable caddy. The unique handle adjusts to accommodate plumbing fixtures and the reversible/removable top tray is ideal for paper towel or sponge storage.

Shown in combination with 5333-33CR side mounted.

Seven dividers for sauce pans or lids. Large basket space for larger pots. Larger unit has a large divider section for baking pans, cutting boards and Soft Close Slide.

COOKWARE ORGANIZER

PART # COLOR DESCRIPTION548-06 White 5-1/2” W x 19-3/8” D x 19-1/2” H

548-06CR Chrome 5-1/2” W x 19-3/8” D x 19-1/2” H

PART # DESCRIPTION

5432-05CR 2 Tier Chrome/Aluminum5-3/8” x 22-1/4 D x 23-1/8” H


544-10C-1 Undersink Chrome Basket11-1/4” W x 16-1/4” D x 19-1/2” H 4.5 lbs.

PART # CABINET WIDTH DEPTH HEIGHT WEIGHT

5389-21CR BASE 24 20-1/8”(512mm)

22”(559mm)

9-1/2”(232mm) 19 lbs.

5389-33CR BASE 36 32-1/8”(816mm)

22”(559mm)

9-1/2”(232mm) 23 lbs.

WIRE ACCESSORIES

PREMIER CHROME WIRE KITCHEN STORAGE

G-375

BASE & WALL FILLER ORGANIZERS WITH STAINLESS PANELSThe fillers feature full-extension ball bearing slides, black accessory hooks and pegs and stainless steel panels that provide endless storage customizing from storing pots and pans, cleaning accessories, various cooking utensils, keys, craft supplies and much more.

BASE UNITS

WALL UNITS

One side features adjustable shelvesOne side features

stainless steel panels

434-BF-6SS 434-WF-6SS

433-BF-9C

This product by Rev-A-Shelf takes blind corner organization to a whole new level! The blind corner optimizer front baskets pull-out, then slide over to allow the rear baskets to be pulled out for total access to the items stored within.

5PSP-15-CR 5PSP-15-CR 5PSP-15-CR

15” Min. Cabinet Width opening • 20-1/4” Min. Inside Cabinet Depth • 21” Cabinet Height Opening

Unit contains frame with 4 chrome baskets, 100 lb rated full extension, ball bearing slides, and hardware.Easy installation to the cabinet floor. Can be used for left or right corner.

MAdE OF BIRCH/MAPLE HARdWOOd UV CUREd WITH CLEAR FINISH

PART # dESCRIPTION dIMENSIONS434-BF-3SS 3” Filler Organizer 3” W x 23” D x 30” H434-BF-6SS 6” Filler Organizer 6” W x 23” D x 30” H433-BF-9C 9” Filler Organizer 9” W x 23” D x 30” H

PART # dESCRIPTION dIMENSIONS434-WF-3SS 3” Perforated Filler

Organizer 3”W x 11-1/8”D x 30”H

434-WF-6SS 6” Perforated Filler Organizer 6”W x 11-1/8”D x 30”H

434-MB-KIT 434 Message Board - comes with eraser, markers and marker holder

PART # dESCRIPTION dIMENSIONS5PSP-15-CR Blind Corner Optimizer 26-1/4” (667mm) W x 20-1/4” (514mm) D x 21” (533mm) H

WOOD KITCHEN STORAGE

5PSP CR SERIESCHROME BLIND CORNER OPTIMIZER

All Wood Items Are Carb Phase II Compliant

G-376

Create a functional storage space behind those decorative panels with the new base and wall filler cabinets. Rev-A-Shelf created the whole cabinet that transforms decorative fillers into functional storage pullouts. The 432 Series is available for 3”, 6” and 9” base and wall cabinet applications and features adjustable shelves with chrome rails and full-extension ball bearing slides. Cabinet face not included.

432-BF-3C

432-BF-6C

432-WF-3C

432-WF-6C

BASE CABINET & WALL FILLER PULL-OUT SHELVES

Introducing the Wood Classic Adjustable Shelf Pull-Out with chrome rails designed for base 9”, 12”, 15” and 18” cabinets. The 448 series features our technologically advanced patent pending “tri-slides” for complete stability and adjustable door mount brackets providing up to 5” of flexibility for trouble-free installation on any door style. Shelves are adjustable.

PULL-OUT SHELVING SYSTEM

NEW TRI- SLIDE(patent pending)

NEW ADJUSTABLEDOOR MOUNT

BRACKETS

Installation is easy. From the underside of the cabinet simply screw

the wood block to the bottom of the cabinet for complete stability


PART # dESCRIPTION dIMENSIONS

BASE UNITS

432-BF-3C 3” Filler Organizer 3” W x 23” D x 30” H432-BF-6C 6” Filler Organizer 6” W x 23” D x 30” H432-BF-9C 9” Filler Organizer 9” W x 23” D x 30” H

PART # dIMENSIONS448-BC-5C 5” W x 22-1/2” D x 25-1/2” H448-BC-6C 6-1/2” W x 22-1/2” D x 25-1/2” H448-BC-8C 8” W x 22-1/2” D x 25-1/2” H448-BC-11C 11” W x 22-1/2” D x 25-1/2” H448-BC-14C 14” W x 22-1/2” D x 25-1/2” H


WALL UNITS

432-WF-3C 30” Tall 3” Filler Organizer 3” W x 11-1/8” D x 30” H432-WF-6C 30” Tall 6” Filler Organizer 6” W x 11-1/8” D x 30” H

432-WF36-3C 36” Tall 3” Filler Organizer 3” W x 11-1/8” D x 36” H432-WF36-6C 36” Tall 6” Filler Organizer 6” W x 11-1/8” D x 36” H432-WF39-3C 39” Tall 3” Filler Organizer 3” W x 11-1/8” D x 39” H432-WF39-6C 39” Tall 6” Filler Organizer 6” W x 11-1/8” D x 39” H432-WF42-3C 42” Tall 3” Filler Organizer 3” W x 11-1/8” D x 42” H432-WF42-6C 42” Tall 6” Filler Organizer 6” W x 11-1/8” D x 42” H

WOOD KITCHEN STORAGEAll Wood Items Are Carb Phase II Compliant

G-377

WOOd SINK BASE dOOR STORAGE

• Available for sink base sizes 30”, 36”, & 42” and features a removable polymer tray on the top shelf with new adjustable door mount brackets that provide installation flexibility up to 5”.

Plastic Inserts Included

Cloth liner included

Contains door rack, vegetable oil treated cutting board & mounting screws. Overall height is 16-3/4”.

dOOR MOUNT

BASE WICKER BASKET

dOOR MOUNT POLYETHYLENE CUTTING BOARd

This 4DMBC features a stylish wood and chrome support rack and an easy to clean, abrasive resistant, hygienic, non-stick Polyethylene cutting board.


PART # dIMENSIONS4SBSU-15 10-1/2” W x 5” D x 18-1/2” W 4SBSU-18 13-1/2” W x 5” D x 18-1/2” W4SBSU-21 16-1/2” W x 5” D x 18-1/2” W

PART # dESCRIPTION WEIGHT

4WB-15

BASE 15 WICkER BASkET max. inside width: 12-7/8” - 14-5/8”

11-1/4”W (286 mm) x 7-7/8”H (200 mm) x 21-1/4”D (540 mm)

Individual Pack: Contains (1) Wicker Basket, 2 side mount rails and

1 plastic liner.

5 lbs

4WB-18

BASE 18 WICkER BASkETmax. inside width: 15-7/8” - 17-5/8”

14-1/4”W (362 mm) x 7-7/8”H (200 mm) x 21-1/4”D (540 mm)

Individual Pack: Contains (1) Wicker Basket, 2 side mount rails and 1

plastic liner.

7 lbs

4WB-411-4WICkER BASkET SET -

4 PC. MInIMUMSet includes: (1) 4-1/2”W x 11-1/4”D

x 4-1/2”H basket and cloth liner.3.3 lbs.

4WB-421-4WICkER BASkET SET -

4 PC. MInIMUMSet includes: (1) 4-1/2”W x 21-1/4”D

x 4-1/2” H basket and cloth liner.4.1 lbs.

4WB-1419-52WICkER BASkET

Includes: (1) 14-1/2”W x 19-1/4”D x 11-1/4” H basket and cloth liner.

6 lbs.

4WB-1723-52WICkER BASkET

Includes: (1) 17-1/2”W x 22-3/4”D x 11-1/4”H basket and cloth liner.

7.5 lbs.

PART # dESCRIPTION WEIGHT4dMCB-15 RACk: 9-1/2”W x 8”H x 3”D

BOARD: 7-7/8”W x 16”L x 1-1/4”D 7 lbs.

4dMCB-18 RACk: 12-1/2”W x 8”H x 3”DBOARD: 10-7/8”W x 16”L x 1-1/4”D 10 lbs.

PART # dESCRIPTIONMINIMUM OPENING

4dMCB-15P RACk: 12-1/4”W x 8”H x 2”DBOARD: 9-3/4”W x 15-3/4”H x 5/8” D 13-1/2”

4dMCB-18P RACk: 15-3/4”W x 8”H x 2”DBOARD: 13-3/8”W x 15-3/4”H x 5/8”D 16-1/2”

EXTRA CLEAR PLASTIC LINERS

PART #WORKS

W/ PART#:WBI-15-10 4WB-15WBI-18-10 4WB-18


G-378

dOOR MOUNT SPICE RACK

InSIDE SHELF WIDTH8-3/8”11-3/8”14-3/8”

Depth 2-5/8”

9-5/8”12-5/8”15-5/8”

21-1/2”

3-1/8”Back View of adjustable brackets

4SR-18


Patented Adjustable Mounting Brackets ensure that your doors are not damaged

Designed for 15”, 18” and 21” Wall cabinets this beautiful wood organizer brings your foil and storage bags within easy reach while freeing up valuable drawer and pantry space. Made from maple with chrome rails it is ideal for any decor and the patented adjustable mounting brackets ensure easy installation on various door styles.

VERTICAL FOIL RACK

• Contains door mount spice rack and four screws.

• Height between reaches is 8-5/8”.

AdJUSTABLE dOOR MOUNT SPICE RACK4ASR-18

• Contains 3 adjustable shelves, 2 slotted standards and mounting screws standards are 3/4” W x 22” H x 3/4”D .

Standards3/4” W x

3/4” D x 25” H

Rack Width10-1/8”13-1/8”16-1/8”

Overallw/Standard 4”Shelf 3-5/8”Inside Rack Depth 2-1/4”

Inside Rack Width8-3/4”11-3/4”14-3/4”

3-5/8”Inside Rack

Height203/32”

Our storage organizers include patented brackets that offer up to an extra 5” of mounting adjustability. The AMB attachment is designed to extend mounting options to the thick portion of the door increasing installation flexibility and eliminating the need for sub-door panels.

Up to 5” of adjustability, just loosen screws,

adjust, then retighten.

US PATEnT nO: 7,204,569

PART # dIMENSIONS4SR-15 9-5/8” W x 3-1/2” D x 21-1/2” H4SR-18 12-5/8” W x 3-1/8” D x 21-1/2” H4SR-21 15-5/8” W x 3-1/8” D x 21-1/2” H


MINIMUM CABINET OPENING WEIGHT

4WFR-15-1 Vertical Foil Rack for 15” Cabinet 10-1/8” W x 4” D x 8” H 11” 2.5 lbs.4WFR-18-1 Vertical Foil Rack for 18” Cabinet 13-1/8” W x 4” D x 8” H 13-3/4” 3 lbs.4WFR-21-1 Vertical Foil Rack for 21” Cabinet 16-1/8” W x 4” D x 8” H 16-5/8” 3.5 lbs.

PART # dIMENSIONS4ASR-15 10-1/8” W x 4” D x 25” H4ASR-18 13-1/8” W x 4” D x 25” H4ASR-21 16-1/8” W x 4” D x 25” H

PART # dESCRIPTION4ASR-31STd-20 31” Door Mount Spice Rack Standards4ASR-37STd-20 37” Door Mount Spice Rack Standards


G-379

This double 15 quart dark gray polymer pull-out waste container features built in handles for easy removal and is nestled in a heavy gauge chrome wire frame. The 5469 series features 18” bottom mount full extension self closing slides and door mount brackets.

NOTE: Minimum inside cabinet width is 14-1/4” Minimum opening width is 13-3/4” Minimum opening height is 15-7/8”

5349-18DM-2 5349-18DM-217 5349-18-DM-2SS

5349-1527DM-2 5349-1527DM-217 5349-2150DM-217 5349-2150DM-2

Rev-A-Shelf’s ground breaking Soft-Open/Soft-Close Rev-A-MotionTM waste containers are now available in an innovative Top-Mount application. The front, side and rear adjustable mounting brackets provide stability and easy installation. These products are constructed of solid maple and available in two sizes, Single 50 Qt. (for 18” full height base cabinets) and a Double 50 Qt. (for 21” full height base cabinets). They feature pre-assembled door mount brackets for easy one-step operation and rear adjustable mounting brackets for stability and easy installation.

Additional mending plate for frameless applications

Unique adjustable bracket is designed for 1-1/2”, 1-5/8”, and 1-3/4” face frame applications and will adapt to frameless construction.

Rev-A-Motion Slide system provides 8” of assisted opening and closing.

FITS INSET DOORS

CONCEAlED SlIDES!

with Rev-A-Motion

PART # DESCRIPTION DIMENSIONS5349-18DM-2 Two 35 qt. white polymer containers (plastic) 14-7/8” W x 22” D x 19-1/2” H

5349-18DM-217 Two 35 qt. Metallic silver polymer containers (plastic) 14-7/8” W x 22” D x 19-1/2” H5349-18-DM-2SS Two 32 qt. Stainless steel containers 14-7/8” W x 22” D x 19-1/2” H5349-1527DM-2 Two 27 qt. white polymer containers (plastic) 11-5/8” W x 22-3/4”D x 19-1/8” H

5349-1527DM-217 Two 27 qt. metallic silver containers (plastic) 11-5/8” W x 22-3/4”D x 19-1/8” H5349-2150DM-217 Two 50 qt. metallic silver polymer containers (plastic) 15-5/8” W x 22” D x 23-1/8” H5349-2150DM-2 Two 50 qt. white polymer containers (plastic) 15-5/8” W x 22” D x 23-1/8” H

PART # DESCRIPTION5469-15DM-2CR 14” W x 18” D x 15-3/4” H

PART # DESCRIPTION WEIGHT4WCTM-RM-1850DM-1 Single 50 Qt. Containers

15-1/4” W x 21-3/4” D x 21-3/4” H 20 lbs.

4WCTM-RM-2150DM-2 Double 50 Qt. Containers18-1/4” W x 21-3/4” D x 21-3/4” H 24 lbs.

DOUBLE PULL-OUT WASTE CONTAINERS

TOP MOUNT PULL-OUT WASTE CONTAINERS

WASTE CONTAINER LIDS

G-380

RV SERIES PRICE lIST AND DESCRIPTION

PART # DESCRIPTIONRV-35-lID-1 35 QT. Waste Container lid-White

RV-35-lID-17-1 35 QT. Waste Container lid-Metallic SilverRV-35-lID-18-1 35 QT. Waste Container lid-Black

RV-50-lID-1 50 QT. Waste Container lid-WhiteRV-50-lID-17-1 50 QT. Waste Container lid-Metallic Silver


PER CARTONRV-12KD-17CS 10-5/8”W x 22”D x 19-1/4”H Single 35 Qt. Waste Container-w/full extension 12 lbs.RV-15KD-17CS 11-13/16”W x 22-1/4”D x 19-1/8”H Double 27 Qt. Containers-w/full extension 14 lbs.

RV-1024W 27 Qt. Replacement Container - 11-3/8”W x 11-3/8”D x 17-3/4”H –RV-18KD-17CS 14-3/8”W x 22”D x 19-1/4”H Double 35 Qt. Waste Container-w/full extension 15 lbs.

RVDM17KIT Heavy Duty Door Mount Kit in Metallic Silver (Includes Euro Adapter Kit) 2 lbs.


PER CARTON

A

RV-814PB 8-7/8”W x 15-5/8”D x 15-7/8”H Single 20 Qt. Waste Container 6 lbs.RV-20-52WH 20 Qt. Replacement Container - 8-3/8” W x 14-1/4” D x 15” H –

RV-9PB 9-1/2”W x 22”D x 19-1/2”H Single 30 Qt. Waste Container 9.5 lbs.6700-61-52 30 Qt. Replacement Container - 9-3/8” W x 15-3/8” D x 17-7/8” H –RV-9PBS 9-1/2”W x 22”D x 19-1/2”H Single 30 Qt. Waste Container w/full extension 9.5 lbs.RV-12PB 10-5/8”W x 22”D x 19-1/4”H Single 35 Qt. Waste Container 10 lbs.RV-35-52 35 Qt. Replacement Container - 14-7/8” W x 10-1/2” D x 17-7/8” H –

RV-12PBS 10-5/8”W x 22”D x 19-1/4”H Single 35 Qt. Waste Container w/full extension 10 lbs.


PER CARTONB RV-12PBl 10-5/8”W x 22”D x 20-3/8”H Single 35 Qt. Waste Container w/lid 10 lbs.


PER CARTON

C RV-12PB-50 11-1/4”W x 22”D x 23-1/4”H Single 50 Qt. Waste Container 10 lbs.RV-50-52 50 Qt. Replacement Container - 11-1/4” W x 15-5/8” D x 21-5/8” H –


PER CARTON

D RV-14PB-S 14-5/8”W x 16”D x 16-3/8”H Single 20 Qt. Waste Container 11 lbs.RV-20-52WH 20 Qt. Replacement Container - 8-3/8” W x 14-1/4” D x 15” H –


PER CARTON

E RV-18PB-1 14-7/8”W x 22”D x 19-1/4”H Single 35 Qt. Waste Container 13 lbs.RV-35-52 35 Qt. Replacement Container - 14-7/8” W x 10-1/2” D x 17-7/8” H –


PER CARTON

F RV-18PB2-S 14-3/8”W x 22”D x 19-1/4”H Double 35 Qt. Waste Container w/full extension 14 lbs.RV-35-52 35 Qt. Replacement Container - 14-7/8” W x 10-1/2” D x 17-7/8” H –

SINGLE PULL-OUT WASTE CONTAINERS

WASTE CONTAINER LIDS

WASTE CONTAINERS WITH FULL EXTENSION SLIDES

G-381

RV SERIES

RV-DM KITAll RV series waste containers can be attached to the cabinet door for an easy one step process with the heavy-duty door mount kit. This system is considered the best in the industry with a six way adjustable door-mounting bracket for easy installation and simple job site adjustments. The RV-DM kit includes a complete set of brackets, fasteners and spacers for installation on any door style eliminating the need for a sub door panel.

THIS KIT CAN BE ADDED TO All RV SERIES WASTE BINS AND HAMPERS

CONTAINS:2- Product Members, 1- set-door brackets (1 left & 1 right),2- 1/4” x 1/2” bolts, 2- 1/4” x 1/2” bolts w/washers, 4- #10 x 1/2” truss head screws, 4-nylock nutsSpacer Kit:2- 1/2” x 1” bolts, 2- 1/4” x 1” bolts w/washers, 4- 3/8” spacers

Feature: RV-DMBrackets can be adapted to any door application without need for sub-door.

* RV-8PB requires Euro Adapter Kit. Part #RVEUROADAPTORKIT52

A B C D

E F F RV-12PBS W/RV-DM-KIT

has a 35% restock fee.

This popular waste container series is available in a variety of sizes to accommodate almost any cabinet space. Regarded as the best in the industry, the RV Series features a heavy-duty wire frame construction; 3/4 or full-extension ball bearing slides and easy bottom mount installation with just four screws. These durable pull-out waste containers are packaged fully assembled and carry the standard Rev-A-Shelf lIFETIME GUARANTEE.

PART # DESCRIPTION FINISHSETS PER CARTON

WEIGHT PER CARTON

RV-DM-KIT Heavy Duty door mount kit White Enamel 1 2 lbs.RVEUROADAPTORKIT52 Euro Slide adapter kit for RV-8PB -- 1 1 lb.


G-382

It’s all about the smooth sliding system with the 5349 Series. This assortment of single and double stainless steel or polymer waste containers features heavy-duty brushed aluminum Soft Close Slides that provide exceptional support and stability eliminating thatside-to-side movement and a fully adjustable door mount frame.

Introducing Rev-A-Shelf’s newest addition to the waste container family, the stainless steel sink base pull-out waste container. Ideal for kitchen, vanity and wet bar sink base cabinets. Made to fit conveniently in the limited spaces around existing plumbing. Features two separate stainless steel containers (one 10 liter bin and one 20 liter bin), a covered lid, built in handles for easy removal, full extension ball bearing slides and is available with or without a door mountable frame.

5349-15DM-1 5349-1550DM-15349-15DM-117 5349-1550DM-117

8-785-30-2SS 8-785-30-DM2SS

Contains: Mounting frame, full-extension slides, lid, 2 containers and screws. 8-785-30-DM2SS includes a door mount bracket.

5349-2150DM-2175349-15DM-1SS

PART # DESCRIPTION5349-15DM-1 One 35 qt. white polymer container (plastic)

10-3/4”W x 22”D x 19-1/2”H

5349-15DM18-1 One 35 qt. white polymer container (plastic)10-3/4”W x 18”D x 19-1/2”H

5349-15DM-117 One 35 qt. Metallic Silver polymer container (plastic)10-3/4”W x 22”D x 19-1/2”H

5349-15DM18-117 One 35 qt. Metallic Silver polymer container (plastic)10-3/4”W x 18”D x 19-1/2”H

5349-1550DM-1 One 50 qt. white polymer container (plastic)11-1/4”W x 22”D x 22-3/4”H

5349-1550DM-117 One 50 qt. Metallic Silver polymer container (plastic)11-1/4”W x 22”D x 22-3/4”H

5349-15DM-1SS One 32 qt. Stainless Steel container11-1/4”W x 22”D x 19-1/2”H

5349-15DM18-1SS One 32 qt. Stainless Steel container11-1/4”W x 18”D x 19-1/2”H

5349-2150DM-217 Double 50 qt. Metallic Silver Polymer Container14-13/16”W x 22-1/8”D x 22-15/16”H

PART # DESCRIPTION8-785-30-2SS Under Sink Mount Waste Container

10-1/4” W x 18-3/4” D x 15-3/16” H8-785-30-DM2SS Door Mount Under Sink Waste Container

10-1/4” W x 18-3/4” D x 15-3/16” H

STAINLESS STEEL UNDER THE SINK MOUNTWASTE CONTAINER


G-383

Made from solid wood construction, the Top Mount Pull-Out Waste Containers are available in a single 35 qt. and 50 qt., double 27 qt., double 35 qt. and 50 qt. variety. The 4WCTM Series is designed for absolute sturdiness with front side mounting, rear adjustable mounting brackets for variances in cabinet depth, pre-assembled door mounting brackets and full-extension 150 lbs. rated over-travel-slides.In addition, the single waste container system includes a short polymer bin that provides an extra storage space for garbage bags.

FULLY ASSEMBLED Contains: 1, 2 or 4 container(s), full-extension slides,

and built in door mount brackets4WCTM-27-4 is not a door mount unit.

Made from solid wood construction, the Bottom Mount Pull-Out Waste Containers are available in a single 35 qt. or double 35 qt. variety. The 4WC Series encases the containers in a durable wood base at the bottom of the cabinet to allow easy retrieval of the polymer waste bins and features full-extension ball bearing slides with pre-assembled door mount brackets.

4WC-15DM-1 4WC-18DM-2

4WCTM-12DM-1 4WCTM-18DM-24WCTM-1550DM-1 4WCTM-15DM-2

4WCTM-27-4

4WCTM-2150DM-2

Use for custom face frame installations

PART # DESCRIPTION4WCTM-12DM-1 one 35 qt. container

12”W x 17-7/8”H x 22”D

4WCTM-1550DM-1one 50 qt. container & small polymer bin

18”W x 21-3/4”H x 22-5/8”D(door mount)

4WCTM-15DM-2 two 27 qt. containers12”W x 17-3/4”H x 22-7/8”D

4WCTM-18DM-2 two 35 qt. containers15”W x 17-7/8”H x 22”D

4WCTM-2150DM-2 two 50 qt. containers18”W x 21-3/4”H x 22-13/16”D

4WCTM-27-424”W x 22-13/16”D x 18”H

top mount wood frame, full extension slides4 x 27 Qt. Container

RV-1024W 27 Qt. Replacement Container Only11-3/8”W x 11-3/8”D x 17-3/4”H

RV-35-52 35 Qt. Replacement Container Only14-3/8”W x 15-3/8”D x 17-7/8”H

RV-50-52 50 Qt. Replacement Container Only11-1/4”W x 15-5/8”D x 21-5/8”H


4WCTM-SP-KIT 1-1-/2”W x 22-1/4”D x 2-7/16”HWood Finish 5 lbs.

PART # DESCRIPTION4WC-15DM-1 one 35 qt. container set

11-1/4”W x 19-1/4”H x 21-3/4”D4WC-18DM-2 two 35 qt. containers set

14-1/4”W x 19-1/4”H x 21-3/4”DRV-35-52 35 Qt. Replacement Container

14-1/4” W x 10-1/2” D x 17-7/8” H

PULL-OUT WASTE CONTAINERSBOTTOM MOUNT SERIES

TOP MOUNT SERIES

SPACER KIT

All Wood Items Are Carb Phase II Compliant

orgaization systems

Documents

spice trays wood

spice drawer trays

spice racks

spice susan

wood spice drawer

spice trays plastic

spice rack

plastic trays