www.stegosafety.com

SA

FETY

SA

FETY

SA

FETY

SA

FETY

SA

FETY

SA

FETY

SA

FETY

SA

FETY

INNOVATION

ER

GO

NO

MIC

ER

GO

NO

MIC

DEXTERITYDEXTERITYDEXTERITY

BR

EA

THA

BIL

ITY

BR

EA

THA

BIL

ITY

BR

EA

THA

BIL

ITY

BR

EA

THA

BIL

ITY

BR

EA

THA

BIL

ITY

BR

EA

THA

BIL

ITY

BR

EA

THA

BIL

ITY

BR

EA

THA

BIL

ITY

BR

EA

THA

BIL

ITY

BR

EA

THA

BIL

ITY

FLEXIBILITYFLEXIBILITYFLEXIBILITYFLEXIBILITYFLEXIBILITYFLEXIBILITYFLEXIBILITYFLEXIBILITYFLEXIBILITY

TECHNOLOGYTECHNOLOGYTECHNOLOGYTECHNOLOGYTECHNOLOGYTECHNOLOGYTECHNOLOGYTECHNOLOGYTECHNOLOGYTECHNOLOGYTECHNOLOGYTECHNOLOGYTECHNOLOGYTECHNOLOGYTECHNOLOGYTECHNOLOGYTECHNOLOGY

PROTECTIONPROTECTIONPROTECTION

CO

MFO

RT

DURABILITYDURABILITY

HAND PROTECTION ENGINEERED. ACHIEVED.

Stego®®® ® Gloves Technologies

STEGO® TECHNOLOGIES INC. 3400 Ridgeway Drive,Mississauga, Ontario L5L 0A2, CanadaWeb: www.stegosafety.com

This leaflet is designed and published by STEGO® TECHNOLOGIES INC. Covered under the intellectual property law. Any reproduction in whole or in part is strictly prohibited without written approval. SLCN10181

EN ISO 374-1 ‘Terminology and performance requirements for chemical risks. It is based on three test methods: • Penetration test in accordance with standard EN 374-2: 2014 • Permeation test in accordance with standard EN 16523-1: 2015 which replaces standard EN 374-3 • Degradation test in accordance with standard EN 374-4: 2013

EN 374:2016 - Protection against dangerous chemicalsand micro-organisms

EN ISO 374-1

NEWOLD

EN ISO 374-1:2016EN 374-1:2003

Protective gloves against dangerous chemicals andmicro-organisms

Protective gloves against chemicals and micro-or-ganisms

Removal of reference to micro-organisms in the textAssumption of protection against micro-organisms

Number of test chemicals increased from 12 to 1812 test chemicals

Beaker icon no longer usedBeaker for “waterproof protective gloves with limited protection against chemical dangers”

Gloves classified as type A, B or CN/A

Change of labeling on the product: pictogram of conical flask with differing number of letters for test chemicals per type

Pictogram of conical flask with at least 3 letters for test chemicals

Type of glovesRequirementNew Marking

Type APenetration resistance (EN 374-2)

Breakthrough time ≥ 30 min for at least 6 chemicalsin the new list (EN 16523-1)

Type BPenetration resistance (EN 374-2)

Breakthrough time ≥ 30 min for at least 3 chemicalsin the new list (EN 16523-1)

Type CPenetration resistance (EN 374-2)

Breakthrough time ≥ 10 min for at least 1 chemicalin the new list (EN 16523-1)

EN ISO374-1 / Type A

EN ISO374-1 / Type B

EN ISO374-1 / Type C

EN ISO 374-5 ‘Terminology and performance requirements for micro-organisms risksThis standard specifies performance requirements for gloves against micro-organisms. Microbiological agents are: bacteria, virus or fungi.

Penetration testing is required for all gloves claiming micro-organisms protection; the test method required are EN ISO 374-2:2014, air-leak and water-leak. The possibility of claiming protection against viruses was added, if the glove passes ISO 16604: 2004 (method B) test.

Two classifications:

ClassProtectionNew Marking

Protection against bacteriaand fungi

For gloves offering protection against bacteria and fungi.

Protection against viruses, bacteria and fungi

For gloves protecting against bacteria, fungi and viruses.

EN ISO 374-5

VIRUS

EN ISO 374-5

Understanding the

STANDARDS 51

233

44555 Understanding the

STANDARDS

Levels of performanceLevel 1Level 2Level 3Level 4Level 5

Abrasion resistance (number of cycles)1005002,0008,000--

Cut (Coup Test) 1.22.55.010.020.0

Tear resistance (N)10255075--

Puncture resistance (N)2060100150--

Cut (TDM-100 Test) (N)ABCDEF

25 10152230

Impact protectionP (Pass), F (Fail), X (Not Applicable)

EN 388:2016 - Protection against mechanical risks

OLDMARKING

Rating

Abrasion1 2 3 4

Cut (Coup Test)1 2 3 4 5

Tear1 2 3 4

Puncture1 2 3 4

4 4 3 4

To account for the new additions of the TDM-100 cut test and impact test to the EN 388 standard, the glove marking will now feature two additional components as seen in the “New Marking” diagram.The updated EN 388 2016 standard will also include an impact protection test.

NEWMARKING

Rating

Abrasion1 2 3 4

Cut (Coup Test)1 2 3 4 5

Tear1 2 3 4

Puncture1 2 3 4

Cut (TDM-100 Test)A-F

Impact Protection(P-Passed, F-Failed, X-Not Tested)

P,F,X

4 4 3 4 D P

ANSI / ISEA105-2016

CUT

ANSI / ISEA 105-2016 Cut ASTM F2992-15 (TDM)

Harm

onizedC

ut Levels

* Newton is approximately equivalent to 102 grams

NEW: ANSI/ISEA 2016

ASTM F2992-15 (TDM)

LEVELGRAMS

A1≥ 200

A2≥ 500

A3≥ 1000

A4≥ 1500

A5≥ 2200

A6≥ 3000

A7≥ 4000

A8≥ 5000

A9≥ 6000

NEW: EN 388-2016

ISO 13997(TDM)

LEVELNEWTONS*

A2

B5

C10

D15

E22

F30

Abrasion resistance testing measures how well the glove resists loss of material from rubbing on rough surfaces. Larger numbers of cycles indicate greater abrasion resistance. ASTM D3389-10 is used for coated gloves and the end point (failure) is the number of abrasion cycles when the film or coating is worn through. ASTM D3884-09 is used for uncoated gloves and the end point is the number of abrasion cycles when the first threat or yarn is broken.

Note: Same with the ANSI Cut, the new abrasion levels will have an “A” listed in front of them in order to differentiate it from the old ones.

ANSI / ISEA 105-2016 AbrasionASTM D3389-10, ASTM D3884-09

NEW: ANSI / ISEA 2016

ASTM D3389-10, ASTM 03884-09

Performance LevelAbrasion Revolution

(tested at 500g vertical force)

0<100

1≥100

2≥500

3≥1000

(tested at 1,000g vertical force)

4≥3,000

5≥10,000

6≥20,000

ANSI / ISEA105-2016

ABR

67

89

1011

SM

LXLXXL

LENGTH Measure from the

bottom of your palm

(where meets your

wrist) to the top of

your middle finger.

WIDTH Measure the width of yourpalm at its widest point below knuckle.

kNOW yOUR GLOVE SIzE

ORDERING yOuR GLOvES

Stego® hand protection gloves are available in wide selection of styles and are designed to meet varying needs of different industries. Each protective glove is rigorously designed and engineered to

provide the best hand solution for our customers.

Consider the following information when placing an order:• Product Article Number• Color and Size information• Required protection and application.• See product information table for details.

Or contact our Stego® Sales Representativeto assist you in selecting the most suitable glove for your needs.

We have made every effort to make this leaflet accurate. Given the number of factors to consider in selecting the appropriate gloves, the users should perform appropriate preliminary tests and evaluations to determine the suitability of the gloves selected for the actual conditions of use. Users are encourage to always use caution and care.

Due to improvement of product performance and availability of materials, there may be specification changes made during the year. Specifications are subject to change without notice.

STEGO® reserves the right to discontinue or drop products, sizes or styles without prior notice. STEGO® DISCLAIMS ALL WARRANTIES OTHER THAN AS EXPRESSLY PROVIDED.

CHEMICALAND LIQUIDPROTECTION

Dear Customer,Stego® is your trusted partner in hand safety. We engineer our gloves for comfort, durability and quality for our customers. We offer optimum safety solutions that are backed by timely quality services. Stego® provides the best protection that consistently performs.

EXTENSIvE HAND SAFETy SOLuTIONS

Customer service is a big part of who we are at Stego®. We help different clientele in tackling their toughest challenges in hand safety and addressing their needs. Our extensive range of safety solutions cater for broad range of risks and applications.

RELIABLE SySTEM OF QuALITy

Stego® hand safety gloves are the foremost choice of users looking for protection and performance. We have built a strong quality system to ensure our products meet protection parameters and international ANSI and EN standards. Our products offer customers quality and longevity along with technical and business support.

STEGO® Team

Stego® Gloves Technologies’ innovative hand protection gloves are engineered for various industries and applications. Our safety gloves are conceptualized, designed and developed to the highest level of protection. We offer protection solutions against cut, mechanical, chemical and impact risks.

STEGO® WORLD OF HAND PROTECTION

MECHANICAL,MULTI-PURPOSEAND PRECISIONHANDLING

IMPACTAND CUTPROTECTION

CUT AND PUNCTURE PROTECTION

Comfort . Durability . Quality

CAT II EN 420 EN 388

4 5 4 3 D

CAT II EN 420 EN 388

4 5 4 4 E

CAT II EN 420 EN 388

4 1 3 1 X

CAT II EN 420 EN 388

4 1 3 1 X

CAT II EN 420 EN 388

3 1 3 1 X

5CUT

TECHNOLOGY 5CUT

TECHNOLOGY

ELASTICATEDCUFFS

PUCOATED

BREATHABLEBACk

SANDyNITRILE

Made of seamless knit HPPE liner that provides long lasting protection against cut, tear and abrasion. Perfect fit with

high tenacity.

Sizes: 7/S | 8/M | 9/L | 10/XL | 11/2XL

EN Cut Level 5 & ANSI Cut A5High performance glove offering

superior protection. Sandry Nitrile palmfor good grip.

Sizes: 8/M | 9/L | 10/XL

CUT DEFENDER-IIST-7096

CUT DEFENDER-IIIST-7097

TACTIFLEXST-2025

TACTIMAXST-2060

FLEXILITEST-6014

OPTI-CHEM GRIPST-1080

1Pair/Poly

144Pairs/Box

1Pair/Poly

144Pairs/Box

1Pair/Poly

144Pairs/Box

1Pair/Poly

144Pairs/Box

1Pair/Poly

144Pairs/Box

Anti-skid nylon knit liner with increased flexibility and breathbility. High abrasion resistance with Nitrile foam coating on

palm for good grip.

Sizes: 7/S | 8/M | 9/L | 10/XL | 11/2XL

ANTI-SKIDLINER

NITRILEFOAM

4ABR

4ABR

Designed for precision handling in various working environments. Made with

Micro-Nitrile foam coating on palm thatgives dexterity and grip.

Sizes: 7/S | 8/M | 9/L | 10/XL

ABR

SOFT PALMTEXTURE

MICRONITRILE

POLyESTERkNIT

LATEXCOATED

Practical choice for users who are looking for great dexterity, fit, flexibility and mechanical

performance. Lightweight and breathable gloves.

Sizes: 8/M | 9/L | 10/XL

HAND PROTECTION ENGINEERED. ACHIEVED.

PVC gloves dipped in rough sandy finish provides excellent protection. Cotton

knitted liner that offers superior performance and absorbs perspiration.

Sizes: 8/M | 9/L | 10/XL

CAT III EN 420 EN 388

4 1 2 1 X

EN ISO 374-1/ TyPE B

A J k

EN ISO 374-5

COTTONLINER

SANDy PALMTEXTURE

Technology

1Pair/Poly

60Pairs/Box

CAT II EN 420 EN 388

4 5 4 4 F P

SHELL SERIESST-9085

1Pair/Poly

60Pairs/Box

High impact and cut protection(EN Cut Level 5 & ANSI Cut A6).

SHELL scale grip on palm for great grip and skid resistance.

Sizes: 7/S to 13/4XL

5CUT

SIDEGUSSET

SHELLSCALE GRIP

EN 420 EN 388

4 5 4 4 F P

SHELL SERIESST-9080

1Pair/Poly

120Pairs/Box

Superior impact and cut protection(EN Cut Level 5 & ANSI Cut A6).

Sandy Nitrile palm for superior grip.Hi-viz color scheme increases visual awareness.

Sizes: 8/M | 9/L | 10/XL | 11/2XL

5CUT

THUMB CROTCH

SANDyNITRILE

ProtectionCategory

Article Number Product Name Cat. EN

420

EN 388ANSI/ISEA 105-2016

CUT

ANSI/ISEA 105-2016ABRASION

EN ISO 374-5

EN ISO 374-1 Colors Quantity Features Applications

A C T P CutTDM Impact

Cut andPuncture

Protection

ST-7096 CutDefender - II II • 4 5 4 3 D - A4 - - - Dark

Grey1pr/poly

144prs/ctn Metal fabrication, construction, glass plants, metal stamping, automotive, assembly works

& handling sharp objectsST-7097 Cut

Defender - III II • 4 5 4 4 E - A5 - - - Black 1pr/poly144prs/ctn

Mechanical, Multi-purpose,and Precision

Handling

ST-2025 Tactiflex II • 4 1 3 1 X - - A4 - - Dark Blue

1pr/poly144prs/ctn

Automotive, electronics, logistics, light assembly, small parts handling, construction,

agriculture & general maintenanceST-2060 Tactimax II • 4 1 3 1 X - - A4 - - Grey 1pr/poly

144prs/ctn

ST-6014 FlexiLite II • 3 1 3 1 X - - - - - Red 1pr/poly144prs/ctn

ChemicalProtection ST-1080 Opti-Chem Grip III • 4 1 2 1 X - - - • TyPE B

A J kLight Blue

1pr/poly60prs/ctn

General chemical handling works, laboratory, petrochemicals, automotive, fishery,

construction, painting & general maintenance

Impactand Cut

Protection

ST-9080 Shell Series II • 4 5 4 4 F P A6 - - - Black 1pr/poly120prs/ctn

Rig drilling, oil & gas, construction, power tool usage, mining, demolition, & material handling

ST-9085 Shell Series II • 4 5 4 4 F P A6 - - - Hi-Viz Green

1pair/poly60prs/ctn

RE SIS

CUT TAN

T

RE SIS

CUT TAN

T

RE SIS

CUT TAN

T

RE SIS

CUT TAN

T

Stego® range of cut performance gloves provide high-quality protection against lacerations and puncture hazards.

Using advancedTEGX® technology, Stego® gloves are technically engineered to prevent hand injuries caused by extreme workconditions and deleterious materials.

to prevent hand injuries to prevent hand injuries caused by extreme workcaused by extreme work

Synthetic fibers

Naturalfibers

High Performance yarns

OUTSTANDING COMFORTMECHANICAL AND MuLTI-PuRPOSEPrecision handling and mechanical needs

Stego® Gloves Technologies’ range of mechanical protection gloves are robustly built for precision handling and multi-purpose needs.

Engineered to perfectly fit with the natural curvature of the hands, Stego® gloves offer optimum comfort and dexterity in every wear. Our mechanical and multi-purpose range has added abrasion and tear resistance features giving the wearer confidence to perform.

Light Oil GripOffers ergonomic and enhanced grip abilities in oilyenvironments in automotive, small part handling, painting, petrochemicals and small part handling.

Dry GripSecure grip for dry environments in manufacturing,construction, masonry, maintenance, and warehousingindustries.

Stego® Impact and Cut Protection Gloves are engineered with high level of protection against impact, vibration and cut hazards with optimum functionality and grip.

SHELL-GRD® is an advanced protectiontechnology that deflects impact force away from the shock point rather than transferring force directly to the hand.

IMPACT

HighPerformanceNeopreneSpandex

Hand

Bone

Stego® Chemical and Liquid Protection range is ergonomically constructed for excellent grip and chemical protection.

Developed with CHEMBLOCK® technology, our gloves offer chemical barrier construction thatresist permeation and liquid penetration againstbroad range of non-corrosive chemicals, acids, solvents, oils, greases, and hydrocarbons.

CAT II