oracle communications eagle · 2017-05-24 · oracle® communications eagle measurements reference...
TRANSCRIPT
Oracle® CommunicationsEAGLEMeasurements Reference
Release 46.5
E86977 Revision 1
July 2017
Oracle Communications EAGLE Measurements Reference, Release 46.5Copyright © 1993, 2017, Oracle and/or its affiliates. All rights reserved.
This software and related documentation are provided under a license agreement containing restrictionson use and disclosure and are protected by intellectual property laws. Except as expressly permitted in yourlicense agreement or allowed by law, you may not use, copy, reproduce, translate, broadcast, modify, license,transmit, distribute, exhibit, perform, publish, or display any part, in any form, or by any means. Reverseengineering, disassembly, or decompilation of this software, unless required by law for interoperability, isprohibited.
The information contained herein is subject to change without notice and is not warranted to be error-free.If you find any errors, please report them to us in writing.
If this is software or related documentation that is delivered to the U.S. Government or anyone licensing iton behalf of the U.S. Government, then the following notice is applicable:
U.S. GOVERNMENT END USERS: Oracle programs, including any operating system, integrated software,any programs installed on the hardware, and/or documentation, delivered to U.S. Government end usersare "commercial computer software" pursuant to the applicable Federal Acquisition Regulation andagency-specific supplemental regulations. As such, use, duplication, disclosure, modification, and adaptationof the programs, including any operating system, integrated software, any programs installed on thehardware, and/or documentation, shall be subject to license terms and license restrictions applicable to theprograms. No other rights are granted to the U.S. Government.
This software or hardware is developed for general use in a variety of information management applications.It is not developed or intended for use in any inherently dangerous applications, including applicationsthat may create a risk of personal injury. If you use this software or hardware in dangerous applications,then you shall be responsible to take all appropriate fail-safe, backup, redundancy, and other measures toensure its safe use. Oracle Corporation and its affiliates disclaim any liability for any damages caused byuse of this software or hardware in dangerous applications.
Oracle and Java are registered trademarks of Oracle and/or its affiliates. Other names may be trademarksof their respective owners.
Intel and Intel Xeon are trademarks or registered trademarks of Intel Corporation. All SPARC trademarksare used under license and are trademarks or registered trademarks of SPARC International, Inc. AMD,Opteron, the AMD logo, and the AMD Opteron logo are trademarks or registered trademarks of AdvancedMicro Devices. UNIX is a registered trademark of The Open Group.
This software or hardware and documentation may provide access to or information about content, products,and services from third parties. Oracle Corporation and its affiliates are not responsible for and expresslydisclaim all warranties of any kind with respect to third-party content, products, and services unless otherwiseset forth in an applicable agreement between you and Oracle. Oracle Corporation and its affiliates will notbe responsible for any loss, costs, or damages incurred due to your access to or use of third-party content,products, or services, except as set forth in an applicable agreement between you and Oracle.
Table of Contents
Chapter 1: About This User's Guide........................................................17Overview...............................................................................................................................................18Scope and Audience............................................................................................................................18Documentation Admonishments.......................................................................................................18Manual Organization...........................................................................................................................19My Oracle Support (MOS)..................................................................................................................19Emergency Response...........................................................................................................................20Related Publications............................................................................................................................20Customer Training...............................................................................................................................20Locate Product Documentation on the Oracle Help Center Site...................................................21
Chapter 2: Measurements...........................................................................22Introduction to Measurements...........................................................................................................23Obsolete OAM Measurements and FTA..........................................................................................24Measurements Platform......................................................................................................................25E5-OAM Integrated Measurements..................................................................................................26Data Mirroring......................................................................................................................................28Optional 15-Minute Measurements...................................................................................................28Reports...................................................................................................................................................31
Measurements Platform/E5-OAM Integrated Measurements Feature Reports............33Report Limitations...................................................................................................................37
Chapter 3: Reports........................................................................................38Report Tables........................................................................................................................................39STP System Totals Measurements (SYSTOT)...................................................................................39
STP SYSTOT Report.................................................................................................................39TT SYSTOT Report...................................................................................................................51CGTT SYSTOT Report.............................................................................................................55STPLAN SYSTOT Report........................................................................................................59IDPR SYSTOT Report..............................................................................................................63SIP SYSTOT Report..................................................................................................................69SFTHROT SYSTOT Report.....................................................................................................71
Component Measurements (COMP).................................................................................................72
iiiE86977 Revision 1, July 2017
LINK COMP Report................................................................................................................72LNKSET COMP Report...........................................................................................................85SCTPASOC COMP Report.....................................................................................................93SCTPCARD COMP Report.....................................................................................................98UA COMP Report..................................................................................................................102
Network Management Measurements (NM).................................................................................106STP NM Report.......................................................................................................................106LNKSET NM Report..............................................................................................................113LINK NM Report....................................................................................................................116
Daily Availability Measurements (AVLD).....................................................................................124LINK AVLD Report...............................................................................................................125
Day-To-Hour Availability Measurements (AVLDTH).................................................................133LINK AVLDTH Report.........................................................................................................133
Availability Measurements (AVL)...................................................................................................140LINK AVL Report..................................................................................................................140STPLAN AVL Report............................................................................................................150
Daily Maintenance Measurements (MTCD)..................................................................................153STP MTCD Report..................................................................................................................154LINK MTCD Report..............................................................................................................162LNKSET MTCD Report.........................................................................................................174LNP MTCD Report................................................................................................................176NP MTCD Report...................................................................................................................182STPLAN MTCD Report.........................................................................................................192EIR MTCD Report..................................................................................................................196MAPSCRN MTCD Report....................................................................................................197SCTPASOC MTCD Report...................................................................................................203SCTPCARD MTCD Report...................................................................................................208UA MTCD Report..................................................................................................................213VFLEX MTCD Report............................................................................................................217ATINPQ MTCD Report.........................................................................................................219AIQ MTCD Report.................................................................................................................221GTTAPATH MTCD Report..................................................................................................224SIP MTCD Report...................................................................................................................229DEIR MTCD Report...............................................................................................................231ENUM MTCD Report............................................................................................................233SFTHROT MTCD Report......................................................................................................239
Day-to-Hour Maintenance Measurements (MTCDTH)...............................................................240STP MTCDTH Report............................................................................................................240LINK MTCDTH Report.........................................................................................................248LNKSET MTCDTH Report...................................................................................................265STPLAN MTCDTH Report...................................................................................................268
ivE86977 Revision 1, July 2017
SCTPASOC MTCDTH Report..............................................................................................271SCTPCARD MTCDTH Report.............................................................................................277UA MTCDTH Report............................................................................................................281
Hourly Maintenance Measurements (MTCH)...............................................................................285LNP MTCH Report................................................................................................................285NP MTCH Report...................................................................................................................292EIR MTCH Report..................................................................................................................301MAPSCRN MTCH Report....................................................................................................303VFLEX MTCH Report............................................................................................................309ATINPQ MTCH Report........................................................................................................311AIQ MTCH Report.................................................................................................................313GTTPATH MTCH Report.....................................................................................................316DEIR MTCH Report...............................................................................................................321ENUM MTCH Report............................................................................................................323
Gateway Measurements (GTWY)....................................................................................................329STP GTWY Report..................................................................................................................329ORIGNI GTWY Report..........................................................................................................332ORIGNINC GTWY Report...................................................................................................334LNKSET GTWY Report.........................................................................................................335LSDESTNI GTWY Report.....................................................................................................339LSORIGNI GTWY Report.....................................................................................................341LSONISMT GTWY Report....................................................................................................343
Record Base Measurements (RBASE)..............................................................................................345STP RBASE Report.................................................................................................................345LINK RBASE Report..............................................................................................................350LNKSET RBASE Report........................................................................................................356
Maintenance Status Reports (MTCS)..............................................................................................359LINK MTCS Report...............................................................................................................359LNKSET MTCS Report..........................................................................................................365
Glossary.............................................................................................................................368
vE86977 Revision 1, July 2017
List of Tables
Table 1: Admonishments................................................................................................................................18
Table 2: Demand and Scheduled Reporting.................................................................................................24
Table 3: Enabling 15-Minute Measurements - Impacts..............................................................................29
Table 4: Measurements Platform and E5-OAM Integrated Measurements Feature SystemHeader..........................................................................................................................................................34
Table 5: Measurement Interval Status Criteria............................................................................................36
Table 6: STP System Total STP Measurements............................................................................................40
Table 7: Typical File Size: systot-stp.csv.......................................................................................................51
Table 8: STP System Total Translation Type Measurements.....................................................................51
Table 9: Typical File Size: systot-tt.csv..........................................................................................................55
Table 10: Calling Party GTT Measurements.................................................................................................55
Table 11: Typical File Size: systot-cgtt.csv....................................................................................................59
Table 12: STP System Total STPLAN Measurements.................................................................................60
Table 13: Typical File Size: systot-stplan.csv................................................................................................63
Table 14: Availability of SYSTOT IDPR Report...........................................................................................63
Table 15: SYSTOT IDPR Measurements.......................................................................................................64
Table 16: Typical File Size: systot-idpr.csv...................................................................................................69
Table 17: STP System Total SIP Measurements...........................................................................................69
Table 18: Typical File Size: systot-sip.csv.....................................................................................................71
Table 19: STP System Total SFTHROT Measurements...............................................................................71
Table 20: Typical File Size: systot-sfthrot.csv...............................................................................................72
Table 21: Registers Reported per LINK CLASS for Component Links....................................................72
viE86977 Revision 1, July 2017
Table 22: Component Link Measurements...................................................................................................74
Table 23: COMP LINK Column Headers.....................................................................................................84
Table 24: Typical File Size: comp-link.csv....................................................................................................85
Table 25: Registers Reported Per LINKSET CLASS....................................................................................85
Table 26: Component Linkset Measurements..............................................................................................86
Table 27: COMP LINKSET Column Headers..............................................................................................92
Table 28: Typical File Size: comp-lnkset.csv.................................................................................................92
Table 29: Component SCTPASOC Measurements......................................................................................93
Table 30: COMP SCTPASOC Column Headers..........................................................................................97
Table 31: Typical File Size: comp-sctpasoc.csv............................................................................................97
Table 32: Component SCTPCARD Measurements.....................................................................................98
Table 33: COMP SCTPCARD Column Header..........................................................................................101
Table 34: Typical File Size: comp-sctpcard.csv..........................................................................................102
Table 35: Component UA Measurements...................................................................................................102
Table 36: COMP UA Column Headers.......................................................................................................105
Table 37: Typical File Size: comp-ua.csv.....................................................................................................106
Table 38: Network Management STP Measurements...............................................................................106
Table 39: Typical File Size: nm-stp.csv........................................................................................................112
Table 40: Network Management Linkset Measurements.........................................................................113
Table 41: FTP NM LNKSET Column Headers...........................................................................................116
Table 42: Typical File Size: nm-lnkset.csv...................................................................................................116
Table 43: HSL LSL Differences for Network Management Links...........................................................116
Table 44: Network Management Link Measurements..............................................................................117
Table 45: FTP NM LINK Column Headers................................................................................................124
Table 46: Typical File Size: nm-link.csv......................................................................................................124
viiE86977 Revision 1, July 2017
Table 47: Availability Link Measurements.................................................................................................125
Table 48: FTP AVLD LINK Command Headers........................................................................................132
Table 49: Typical File Size: avld-link.csv....................................................................................................132
Table 50: Availability Link Measurements.................................................................................................133
Table 51: FTP AVLDTH LINK Command Headers..................................................................................139
Table 52: Typical File Size: avldth-link.csv.................................................................................................140
Table 53: Availability Link Register Usage By LINK Class.....................................................................140
Table 54: Availability Link Measurements.................................................................................................142
Table 55: FTP AVL LINK Column Headers...............................................................................................149
Table 56: Typical File Size: avl-link.csv.......................................................................................................149
Table 57: Availability STPLAN Measurements.........................................................................................150
Table 58: Typical File Size: avl-stplan.csv...................................................................................................153
Table 59: Daily Maintenance (MTCD) and Day-To-Hour Maintenance (MTCDTH)Measurements...........................................................................................................................................154
Table 60: Typical File Size: mtcd-stp.csv.....................................................................................................162
Table 61: Registers Reported per LINK CLASS for Daily (MTCD) and Day-To-Hour (MTCDTH)Link Measurements..................................................................................................................................162
Table 62: Maintenance Daily (MTCD) and Maintenance Day-to-Hour (MTCDTH) LinkMeasurements...........................................................................................................................................164
Table 63: Typical File Size: mtcd-link.csv...................................................................................................174
Table 64: Daily Maintenance (MTCD) and Day-to-Hour Maintenance (MTCDTH) LinksetMeasurements...........................................................................................................................................175
Table 65: Typical File Size: mtcd-lnkset.csv...............................................................................................176
Table 66: Daily Maintenance (MTCD) and Hourly Maintenance (MTCH) LNP System WideMeasurements...........................................................................................................................................176
Table 67: Daily Maintenance (MTCD) and Hourly Maintenance (MTCH) LNP Per SSPMeasurements...........................................................................................................................................178
viiiE86977 Revision 1, July 2017
Table 68: Daily Maintenance (MTCD) and Hourly Maintenance (MTCH) LNP LRNMeasurements...........................................................................................................................................179
Table 69: Daily Maintenance (MTCD) and Hourly Maintenance (MTCH) LNP NPAMeasurements...........................................................................................................................................180
Table 70: Typical File Size: mtcd-lnp.csv....................................................................................................181
Table 71: Typical File Size: mtcd-ssp.csv....................................................................................................181
Table 72: Typical File Size: mtcd-lrn.csv.....................................................................................................182
Table 73: Typical File Size: mtcd-npa.csv...................................................................................................182
Table 74: Daily Maintenance (MTCD) and Hourly Maintenance (MTCH) System-WideRegisters.....................................................................................................................................................183
Table 75: Daily Maintenance (MTCD) and Hourly Maintenance (MTCH) SSP Registers..................187
Table 76: Typical File Size: mtcd-np.csv.....................................................................................................191
Table 77: FTP Daily Maintenance (MTCD) SSP Column Header...........................................................191
Table 78: Typical File Size: mtcd-ssp.csv....................................................................................................192
Table 79: Typical File Size: mtcd-ssp.csv....................................................................................................192
Table 80: Daily Maintenance (MTCD) and Day-to-Hour Maintenance (MTCDTH) STPLANMeasurements...........................................................................................................................................192
Table 81: Typical File Size: mtcd-stplan.csv...............................................................................................195
Table 82: Daily Maintenance (MCTD) and Hourly Maintenance (MTCH) EIR Measurements.........196
Table 83: Typical File Size: mtcd-eir.csv.....................................................................................................197
Table 84: Daily Maintenance (MTCD) and Hourly Maintenance (MTCH) MAP Screening SystemWide Measurements................................................................................................................................198
Table 85: Server Entity Identification..........................................................................................................199
Table 86: Path Entity Identification.............................................................................................................200
Table 87: Daily Maintenance (MTCD) and Hourly Maintenance (MTCH) MAP Screening PerServer Measurements...............................................................................................................................201
Table 88: Typical File Size: mtcd-map.csv..................................................................................................202
ixE86977 Revision 1, July 2017
Table 89: Typical File Size: mtcd-path.csv..................................................................................................203
Table 90: Daily Maintenance (MTCD) and Day-to-Hour (MTCDTH) SCTPASOCMeasurements...........................................................................................................................................203
Table 91: FTP MTCD/MTCDTH SCTPASOC Column Header..............................................................208
Table 92: Typical File Size: mtcd-sctpasoc.csv...........................................................................................208
Table 93: Daily Maintenance (MTCD) and Day-to-Hour Maintenance (MTCDTH) SCTPCARDMeasurements...........................................................................................................................................209
Table 94: Typical File Size: mtcd-sctpcard.csv...........................................................................................213
Table 95: Daily Maintenance (MTCD) and Day-to-Hour Maintenance (MTCDTH) UAMeasurements...........................................................................................................................................213
Table 96: Typical File Size: mtcd-ua.csv......................................................................................................216
Table 97: Daily Maintenance V-Flex System Wide Measurements.........................................................217
Table 98: Daily Maintenance V-Flex Per SSP Measurements..................................................................217
Table 99: Typical File Size: mtcd-vflex.csv.................................................................................................218
Table 100: Typical File Size: mtcd-vflex-ssp.csv........................................................................................219
Table 101: Typical File Size: mtcd-vflexssp.csv.........................................................................................219
Table 102: Daily Maintenance (MTCD) and Hourly Maintenance (MTCH) ATINPQ Registers.......219
Table 103: Typical File Size: mtcd-atinpq.csv.............................................................................................220
Table 104: Typical File Size: mtcd-atinpq.csv.............................................................................................221
Table 105: Typical File Size: atinpq 200 SSPs.............................................................................................221
Table 106: Daily Maintenance (MTCD) and Hourly Maintenance (MTCH) AIQ Registers...............222
Table 107: Typical File Size: mtcd-atinpq.csv.............................................................................................223
Table 108: Typical File Size: mtcd-aiq.csv...................................................................................................223
Table 109: Typical File Size: aiq 200 SSPs...................................................................................................224
Table 110: MTCD/MTCH GTT Actions System-Wide Measurements..................................................224
Table 111: MTCD/MTCH GTT Actions Per-Path Measurements..........................................................226
xE86977 Revision 1, July 2017
Table 112: Typical File Size: mtcd-gttasys.csv............................................................................................227
Table 113: Entity Identification(PATH-CDSN-SCDGTA-CGSN-SCGGTA-OPSN-PKG-OPCODE-<A>/F)....................................227
Table 114: Typical File Size: mtcd-gttapath.csv.........................................................................................229
Table 115: Daily Maintenance (MTCD) and Day-To-Hour Maintenance (MTCDTH)Measurements...........................................................................................................................................229
Table 116: Typical File Size: mtcd-sip.csv...................................................................................................231
Table 117: Daily Maintenance (MTCD) and Hourly Maintenance (MTCH) DEIRMeasurements...........................................................................................................................................231
Table 118: Typical File Size: mtcd-deirsys.csv...........................................................................................232
Table 119: Typical File Size: mtcd-deirconn.csv........................................................................................233
Table 120: Daily Maintenance (MTCD) and Hourly Maintenance (MTCH) ENUM System LevelMeasurements...........................................................................................................................................234
Table 121: Daily Maintenance (MTCD) and Hourly Maintenance (MTCH) ENUM Card LevelMeasurements...........................................................................................................................................235
Table 122: Daily Maintenance (MTCD) and Hourly Maintenance (MTCH) ENUM Entity LevelMeasurements...........................................................................................................................................236
Table 123: Daily Maintenance (MTCD) and Hourly Maintenance (MTCH) ENUM ACL LevelMeasurements...........................................................................................................................................236
Table 124: Typical File Size: mtcd-enumsys.csv........................................................................................237
Table 125: Typical File Size: mtcd-enumcard.csv......................................................................................238
Table 126: Typical File Size: mtcd-enument.csv........................................................................................238
Table 127: Typical File Size: mtcd-enumacl.csv.........................................................................................239
Table 128: Daily Maintenance (MTCD) and Day-To-Hour Maintenance (MTCDTH)Measurements...........................................................................................................................................239
Table 129: Typical File Size: mtcd-sfthrot.csv............................................................................................240
Table 130: Daily Maintenance (MTCD) and Day-To-Hour Maintenance (MTCDTH)Measurements...........................................................................................................................................240
xiE86977 Revision 1, July 2017
Table 131: Typical File Size: mtcdth-stp.csv...............................................................................................248
Table 132: Registers Reported per LINK CLASS for Daily (MTCD) and Day-To-Hour (MTCDTH)Link Measurements..................................................................................................................................248
Table 133: Maintenance Daily (MTCD) and Maintenance Day-to-Hour (MTCDTH) LinkMeasurements...........................................................................................................................................250
Table 134: FTP MTCDTH LINK Command Headers...............................................................................264
Table 135: Typical File Size: mtcdth-link.csv.............................................................................................265
Table 136: Maintenance Day-to-Hour Linkset Measurements................................................................265
Table 137: Daily Maintenance (MTCD) and Day-to-Hour Maintenance (MTCDTH) LinksetMeasurements...........................................................................................................................................266
Table 138: Typical File Size: mtcdth-lnkset.csv..........................................................................................267
Table 139: Daily Maintenance (MTCD) and Day-to-Hour Maintenance (MTCDTH) STPLANMeasurements...........................................................................................................................................268
Table 140: Typical File Size: mtcdth-stplan.csv.........................................................................................271
Table 141: Daily Maintenance (MTCD) and Day-to-Hour (MTCDTH) SCTPASOCMeasurements...........................................................................................................................................272
Table 142: Typical File Size: mtcdth-sctpasoc.csv......................................................................................276
Table 143: Daily Maintenance (MTCD) and Day-to-Hour Maintenance (MTCDTH) SCTPCARDMeasurements...........................................................................................................................................277
Table 144: Typical File Size: mtcdth-sctpasoc.csv......................................................................................281
Table 145: Daily Maintenance (MTCD) and Day-to-Hour Maintenance (MTCDTH) UAMeasurements...........................................................................................................................................282
Table 146: Typical File Size: mtcdth-ua.csv................................................................................................285
Table 147: Daily Maintenance (MTCD) and Hourly Maintenance (MTCH) LNP System WideMeasurements...........................................................................................................................................286
Table 148: Daily Maintenance (MTCD) and Hourly Maintenance (MTCH) LNP Per SSPMeasurements...........................................................................................................................................287
Table 149: Daily Maintenance (MTCD) and Hourly Maintenance (MTCH) LNP LRNMeasurements...........................................................................................................................................289
xiiE86977 Revision 1, July 2017
Table 150: Daily Maintenance (MTCD) and Hourly Maintenance (MTCH) LNP NPAMeasurements...........................................................................................................................................289
Table 151: Typical File Size: mtch-lnp.csv..................................................................................................290
Table 152: Typical File Size: mtch-ssp.csv..................................................................................................290
Table 153: Typical File Size: mtch-lrn.csv...................................................................................................291
Table 154: Typical File Size: mtch-npa.csv.................................................................................................291
Table 155: Daily Maintenance (MTCD) and Hourly Maintenance (MTCH) System-WideRegisters.....................................................................................................................................................292
Table 156: Daily Maintenance (MTCD) and Hourly Maintenance (MTCH) SSP Registers................296
Table 157: Typical File Size: mtch-np.csv...................................................................................................300
Table 158: Typical File Size: mtch-ssp.csv..................................................................................................301
Table 159: Typical File Size: mtch-ssp.csv..................................................................................................301
Table 160: Daily Maintenance (MCTD) and Hourly Maintenance (MTCH) EIR Measurements.......301
Table 161: Typical File Size: mtch-eir.csv...................................................................................................303
Table 162: Daily Maintenance (MTCD) and Hourly Maintenance (MTCH) MAP Screening SystemWide Measurements................................................................................................................................304
Table 163: Server Entity Identification........................................................................................................305
Table 164: Path Entity Identification...........................................................................................................305
Table 165: Daily Maintenance (MTCD) and Hourly Maintenance (MTCH) MAP Screening PerServer Measurements...............................................................................................................................307
Table 166: Typical File Size: mtch-map.csv................................................................................................308
Table 167: Typical File Size: mtch-path.csv................................................................................................308
Table 168: Daily Maintenance V-Flex System Wide Measurements.......................................................309
Table 169: Daily Maintenance V-Flex Per SSP Measurements................................................................309
Table 170: Typical File Size: mtch-vflex.csv...............................................................................................310
Table 171: Typical File Size: mtch-vflexssp.csv..........................................................................................311
xiiiE86977 Revision 1, July 2017
Table 172: Typical File Size: mtch-vflexssp.csv..........................................................................................311
Table 173: Daily Maintenance (MTCD) and Hourly Maintenance (MTCH) ATINPQ Registers.......311
Table 174: Typical File Size: mtch-atinpq.csv.............................................................................................312
Table 175: Typical File Size: mtch-atinpq.csv.............................................................................................313
Table 176: Typical File Size: atinpq 200 SSPs.............................................................................................313
Table 177: Daily Maintenance (MTCD) and Hourly Maintenance (MTCH) AIQ Registers...............314
Table 178: Typical File Size: mtcd-atinpq.csv.............................................................................................315
Table 179: Typical File Size: mtcd-aiq.csv...................................................................................................315
Table 180: Typical File Size: aiq 200 SSPs...................................................................................................315
Table 181: MTCD/MTCH GTT Actions System-Wide Measurements..................................................316
Table 182: MTCD/MTCH GTT Actions Per-Path Measurements..........................................................317
Table 183: Typical File Size: mtch-gttasys.csv............................................................................................319
Table 184: Entity Identification(PATH-CDSN-SCDGTA-CGSN-SCGGTA-OPSN-PKG-OPCODE-<A>/F)....................................319
Table 185: Typical File Size: mtch-gttapath.csv.........................................................................................321
Table 186: Daily Maintenance (MTCD) and Hourly Maintenance (MTCH) DEIRMeasurements...........................................................................................................................................321
Table 187: Typical File Size: mtch-deirsys.csv...........................................................................................322
Table 188: Typical File Size: mtch-deirconn.csv........................................................................................323
Table 189: Daily Maintenance (MTCD) and Hourly Maintenance (MTCH) ENUM System LevelMeasurements...........................................................................................................................................324
Table 190: Daily Maintenance (MTCD) and Hourly Maintenance (MTCH) ENUM Card LevelMeasurements...........................................................................................................................................325
Table 191: Daily Maintenance (MTCD) and Hourly Maintenance (MTCH) ENUM Entity LevelMeasurements...........................................................................................................................................326
Table 192: Daily Maintenance (MTCD) and Hourly Maintenance (MTCH) ENUM ACL LevelMeasurements...........................................................................................................................................326
xivE86977 Revision 1, July 2017
Table 193: Typical File Size: mtch-enumsys.csv........................................................................................327
Table 194: Typical File Size: mtch-enumcard.csv......................................................................................328
Table 195: Typical File Size: mtch-enument.csv........................................................................................328
Table 196: Typical File Size: mtch-enumacl.csv.........................................................................................329
Table 197: Gateway STP Measurements.....................................................................................................329
Table 198: Typical File Size: gtwy-stp.csv...................................................................................................332
Table 199: Gateway ORIGNI Measurements.............................................................................................332
Table 200: Typical File Size: gtwy-origni.csv.............................................................................................333
Table 201: Gateway ORIGNINC Measurements.......................................................................................334
Table 202: Typical File Size: gtwy-origninc.csv.........................................................................................335
Table 203: Gateway Linkset Measurements...............................................................................................336
Table 204: Typical File Size: gtwy-lnkset.csv.............................................................................................338
Table 205: Gateway LSDESTNI Measurements.........................................................................................339
Table 206: Typical File Size: gtwy-lsdestni.csv..........................................................................................340
Table 207: Gateway LSORGINI Measurements.........................................................................................341
Table 208: Typical File Size: gtwy-lsorigni.csv..........................................................................................343
Table 209: Gateway LSONISMT Measurements.......................................................................................344
Table 210: Typical File Size: gtwy-lsonismt.csv.........................................................................................345
Table 211: Record Base STP Measurements...............................................................................................345
Table 212: Typical File Size: rbase-stp.csv..................................................................................................350
Table 213: Registers reported LINK Measurements.................................................................................350
Table 214: Record Base Link Measurements..............................................................................................351
Table 215: Typical File Size: rbase-link.csv.................................................................................................356
Table 216: Record Base Linkset Measurements.........................................................................................357
Table 217: Typical File Size: rbase-lnkset.csv.............................................................................................358
xvE86977 Revision 1, July 2017
Table 218: Maintenance Status Link Measurements.................................................................................359
Table 219: Typical File Size: mtcs-link.csv..................................................................................................365
Table 220: Maintenance Status Linkset Measurements............................................................................366
Table 221: Typical File Size: mtcs-lnkset.csv..............................................................................................367
xviE86977 Revision 1, July 2017
Chapter
1About This User's Guide
This chapter describes the content and structure ofthe user's guide, indicates how to obtain help, details
Topics:
• Overview.....18 where to find related documentation, and providesother general information.• Scope and Audience.....18
• Documentation Admonishments.....18• Manual Organization.....19• My Oracle Support (MOS).....19• Emergency Response.....20• Related Publications.....20• Customer Training.....20• Locate Product Documentation on the Oracle Help
Center Site.....21
17E86977 Revision 1, July 2017
Overview
Measurements Reference describes EAGLE measurements. Measurements provide support for:
• STP performance management
• SS7 traffic monitoring and engineering
• Specific feature performance analysis (STPLAN)
Note: EAGLE supporting ANSI networks make use of the LNP and SEAS features. EAGLE supportingITU networks do not include these systems.
Scope and Audience
This manual is intended for maintenance personnel who must maintain the EAGLE. The technicianshould be familiar with SS7 protocols. The manual provides preventive and corrective proceduresthat will aid maintenance personnel in maintaining the EAGLE.
Preventive maintenance procedures are routines to be carried out on a scheduled basis to help preventsystem failures. These routines are industry-standard recommendations and may be adopted to fitany company maintenance plan.
The corrective maintenance procedures are those used in response to a system alarm or output message.These procedures are EAGLE-specific and aid in the detection, isolation, and repair of faults.
Documentation Admonishments
Admonishments are icons and text throughout this manual that alert the reader to assure personalsafety, to minimize possible service interruptions, and to warn of the potential for equipment damage.
Table 1: Admonishments
DescriptionIcon
Danger:
(This icon and text indicate the possibility ofpersonal injury.)
Warning:
(This icon and text indicate the possibility ofequipment damage.)
18E86977 Revision 1, July 2017
About This User's GuideMeasurements
DescriptionIcon
Caution:
(This icon and text indicate the possibility ofservice interruption.)
Topple:
(This icon and text indicate the possibility ofpersonal injury and equipment damage.)
Manual Organization
The manual is organized as follows:
• About This User's Guide provides general information about the organization of this manual.
• Measurements describes traffic measurements used in the EAGLE.
• Reports describes the reports that can be requested.
My Oracle Support (MOS)
MOS (https://support.oracle.com) is your initial point of contact for all product support and trainingneeds. A representative at Customer Access Support (CAS) can assist you with MOS registration.
Call the CAS main number at 1-800-223-1711 (toll-free in the US), or call the Oracle Support hotlinefor your local country from the list at http://www.oracle.com/us/support/contact/index.html. When calling,make the selections in the sequence shown below on the Support telephone menu:
1. Select 2 for New Service Request2. Select 3 for Hardware, Networking and Solaris Operating System Support3. Select one of the following options:
• For Technical issues such as creating a new Service Request (SR), Select 1• For Non-technical issues such as registration or assistance with MOS, Select 2
You will be connected to a live agent who can assist you with MOS registration and opening a supportticket.
MOS is available 24 hours a day, 7 days a week, 365 days a year.
19E86977 Revision 1, July 2017
About This User's GuideMeasurements
Emergency Response
In the event of a critical service situation, emergency response is offered by the Customer AccessSupport (CAS) main number at 1-800-223-1711 (toll-free in the US), or by calling the Oracle Supporthotline for your local country from the list at http://www.oracle.com/us/support/contact/index.html. Theemergency response provides immediate coverage, automatic escalation, and other features to ensurethat the critical situation is resolved as rapidly as possible.
A critical situation is defined as a problem with the installed equipment that severely affects service,traffic, or maintenance capabilities, and requires immediate corrective action. Critical situations affectservice and/or system operation resulting in one or several of these situations:
• A total system failure that results in loss of all transaction processing capability• Significant reduction in system capacity or traffic handling capability• Loss of the system’s ability to perform automatic system reconfiguration• Inability to restart a processor or the system• Corruption of system databases that requires service affecting corrective actions• Loss of access for maintenance or recovery operations• Loss of the system ability to provide any required critical or major trouble notification
Any other problem severely affecting service, capacity/traffic, billing, and maintenance capabilitiesmay be defined as critical by prior discussion and agreement with Oracle.
Related Publications
For information about additional publications related to this document, refer to the Oracle Help Centersite. See Locate Product Documentation on the Oracle Help Center Site for more information on relatedproduct publications.
Customer Training
Oracle University offers training for service providers and enterprises. Visit our web site to view, andregister for, Oracle Communications training:
http://education.oracle.com/communication
To obtain contact phone numbers for countries or regions, visit the Oracle University Education website:
www.oracle.com/education/contacts
20E86977 Revision 1, July 2017
About This User's GuideMeasurements
Locate Product Documentation on the Oracle Help Center Site
Oracle Communications customer documentation is available on the web at the Oracle Help Center(OHC) site, http://docs.oracle.com. You do not have to register to access these documents. Viewing thesefiles requires Adobe Acrobat Reader, which can be downloaded at http://www.adobe.com.
1. Access the Oracle Help Center site at http://docs.oracle.com.2. Click Industries.3. Under the Oracle Communications subheading, click the Oracle Communications
documentation link.The Communications Documentation page appears. Most products covered by these documentationsets will appear under the headings “Network Session Delivery and Control Infrastructure” or“Platforms.”
4. Click on your Product and then the Release Number.A list of the entire documentation set for the selected product and release appears.
5. To download a file to your location, right-click the PDF link, select Save target as (or similarcommand based on your browser), and save to a local folder.
21E86977 Revision 1, July 2017
About This User's GuideMeasurements
Chapter
2Measurements
Topics:
• Introduction to Measurements.....23• Obsolete OAM Measurements and FTA.....24• Measurements Platform.....25• E5-OAM Integrated Measurements.....26• Data Mirroring.....28• Optional 15-Minute Measurements.....28• Reports.....31
22E86977 Revision 1, July 2017
Introduction to Measurements
This section describes EAGLE measurements. Measurements provide support for:
• STP performance management
• SS7 traffic monitoring and engineering
• Specific feature performance analysis
Measurements provide operations and maintenance personnel with network performance and STPperformance data in accordance with:
• Telcordia GR-82-CORE
• Telcordia GR-310-CORE
• Telcordia GR-478-CORE
• Telcordia GR-778-CORE
Measurements can be collected and reported with the following collection methods:
• Measurements Platform• E5-OAM Integrated Measurements
The primary functions of Measurements are as follows:
• Collection
Measurements are collected in 5-minute, 30-minute, and 60-minute intervals. An option exists forthe default 30-minute measurements to be collected every 15 minutes. Many 30-minutemeasurements intervals are accumulated into daily intervals.
• Storage
Measurements are stored in dedicated RAM tables and/or disks after collection. Most are retainedfor 24 hours. Measurements for some features are retained for 7 days.
• Retrieval
Measurements data is retrieved from the RAM storage area and/or disk. ACTIVE measurementdata is retrieved and reported from the application cards except for SCP SMCs. Registers collectedfrom SCP SMCs are not supported for ACTIVE measurements and will be reported as zero in anACTIVE measurement report. An ACTIVE linkset report requires all links in the linkset to beavailable in order to provide the report.
• Reporting
Measurement reports are available on-demand/scheduled as shown in Table 2: Demand and ScheduledReporting.
23E86977 Revision 1, July 2017
MeasurementsMeasurements
Table 2: Demand and Scheduled Reporting
E5-OAM Integrated MeasurementsMeasurements PlatformReporting Interval
ScheduledDemandScheduledDemand
YesYesYesYes5-minute
YesYesYesYes15-minute (optional)
YesYesYesYes30-minute
NoYesNoYesDay-to-hour
YesYesYesYesHourly
YesYesYesYesDaily
Scheduled measurements are directed to the Traffic Unsolicited Output Message group. No otherunsolicited output is sent to this output group.
Note that the collection of measurements is a separate task from reporting. Measurements collectionis activated automatically upon system power-up, or through administrative commands. Collectionis organized by ENTTYPE and reporting period. Collection occurs per link every 5 minutes, andseparately every 30 minutes. Measurements are generated on the application cards and periodicallycollected by the UI and stored for later retrieval, unless the Measurements Platform is enabled, whereasthe information is collected and stored by the dedicated MPCM cards.
Refer to the Commands User's Guide for descriptions of commands used to generate, schedule, andtransfer measurements reports.
Refer to the Database Administration - System Management User's Guide for information and proceduresto provision the Measurements Platform feature and E5-OAM Integrated Measurements feature.
Obsolete OAM Measurements and FTA
Basic OAM measurements are no longer supported from Release 46.3 onward. For measurementcollection to occur, either the Measurements Platform feature or the E5-OAM Integrated Measurementsfeature must be used. To enable the E5-OAM Integrated Measurements feature, use the followingcommands:
ENABLE-CTRL-FEAT:partnum=893037301CHG-CTRL-FEAT:partnum=893037301:status=ON
OAM-based measurements are collected by an E5-OAM MASP and are stored on the E5-TDM card.
For OAM-based measurements and the Measurements Platform feature, the rept-meas commandsends measurements reports for the NP, GSM MAP screening, LNP, G-Port, A-Port, and IS41 GSMMigration (IGM) features to the file transfer area (FTA). Applications measurements (INP, GSM MAPscreening, and LNP) are now supported only by the FTP reporting capability.
The FTA measurements reporting capability is replaced with the FTP reporting capability.
24E86977 Revision 1, July 2017
MeasurementsMeasurements
EAGLE continues to support retrieval of the ACTIVE PERIOD for links/linkset for troubleshootingpurposes. All the entity types that supported the ACTIVE PERIOD collection without enabling theMeasurements Platform feature or the E5-OAM Integrated Measurements feature are still supported.
The EAGLE UI display of measurement reports via the chg/rept-meas and rtrv-meas-schedcommands is still supported; either the Measurements Platform or E5-OAM Integrated Measurementsmust be enabled.
Measurements Platform
For an EAGLE node with more than 700 links, either the Measurements Platform or the E5-OAMIntegrated Measurements feature must be used to collect measurements. The Measurements Platformmust be used to collect measurements for an EAGLE node with more than 2400 links. The MeasurementsPlatform provides a dedicated processor for collecting and reporting measurements data for EAGLEfunctions, EPAP-related features that collect measurements, GSM MAP Screening, and LNP.
Note: If the 15-Minute Measurements feature is turned on, then the Measurements Plaform is requiredfor support of more than 1200 links.
Links that are supported by the Measurements Platform and E5-OAM Integrated Measurementsfeature include IP associations as shown:
• Each low-speed link (LSL) counts as 1 link• Each ATM high speed link (HSL) counts as 1 link• Each SE-HSL counts as 1 link• For IPLIM, each association counts as 1 link• For IPGW, 1 link per card• For IPSG, each association counts as 1 link
The Measurements Platform feature requires the following hardware and provisioning in the system:
• Two MCPM cards
The platform consists of multiple Measurement Collection and Polling Module (MCPM) cards ina primary/secondary configuration, in which the primary MCPM performs all collection andreporting functions. The secondary MCPM card serves as backup for the primary. The EAGLEinterface is via the standard IMT bus and allows communications with the network elements andthe OAM. The interface to the customer's network supports the FTP transfer of Measurementsreports to an FTP server.
The Primary MCPM maintains constant communication with the Secondary card as a way of eachmonitoring the health status of the other. If the primary MCPM fails before or during collection,the secondary MCPM card assumes the Primary role and begins/continues collection.
• The Measurements Platform feature turned on• The Measurements Platform enable option turned on in the MEASOPTS table• A provisioned customer FTP server• The EAGLE OA&M IP Security feature, and Secure Shell FTP (SFTP) as a client, if secure transfer
is used
Enabling the Measurements Platform feature (feature bit is turned on), allows the MeasurementsPlatform to be provisioned and tested without transferring measurement functionality from the OAMto the Measurements Platform. After the Platform hardware, software, and Ethernet connections have
25E86977 Revision 1, July 2017
MeasurementsMeasurements
been provisioned and verified, the transfer of measurements functionality from the OAM to theMeasurement Platform is initiated by setting the Measurements Platform Enabled bit, which is set by thesystem only one time. From the point that theMeasurements Platform Enabled bit is set and initial datatransfer has occurred, the measurements functionality of the OAM is limited to operator interface formeasurement configuration and on-demand report requests. The Measurements Platform assumesthe collection duties and stores the collected data in MCPM RAM.
After collection of the measurements, scheduled reports are automatically generated and transferredfrom an MCPM card to a customer FTP server using the FTP interface.
Existing FTP file server reports are overwritten by subsequent requests that produce the identical filename.
Reports can be scheduled or generated on demand. Scheduled and on-demand reports are accessibleby the following commands:
• chg-measopts: Used to:
• Enable Measurements Platform collection
• Turn on or turn off the 15 Minute Measurements collection function
• Enable or disable the automatic generation and FTP transfer of scheduled measurements reportsto the FTP server
• Turn on or off the CLLI-based file name option for measurements reports files.
• Turn on or off the unchannelized link label option
• chg-mtc-measopts: Used to enable or disable the automatic generation and FTP transfer ofscheduled measurement reports to the FTP server.
• rept-stat-meas: Reports the status of the Measurements subsystem including card location andstate, Alarm level, and Subsystem State.
• rept-ftp-meas: Manually initiates generation and FTP transfer of a measurements report fromthe MCPM card to the FTP server.
• rtrv-measopts: Displays the status of Measurements Platform collection, scheduled reports,15-Minute Measurements collection, CLLI-based file names, and the unchannelized link label.
• rtrv-mtc-measopts: Displays the enabled or disabled status of hourly and daily maintenancescheduled reports.
Note: If a new entity is provisioned in place of a deleted entity, then the measurements for the deletedentity are set to zero. The reported peg counts apply only to the new entity.
E5-OAM Integrated Measurements
The E5-OAM Integrated Measurements feature provides full measurements support for an EAGLEnode with up to 2400 links without requiring dedicated cards. The Measurements Platform is requiredfor support of more than 2400 links.
26E86977 Revision 1, July 2017
MeasurementsMeasurements
Note: If the 15-Minute Measurements feature is turned on, then the E5-OAM Integrated Measurementsfeature supports measurements up to 1200 links, and the Measurements Plaform is required for supportof more than 1200 links.
Links that are supported by the Measurements Platform and E5-OAM Integrated Measurementsfeature include IP associations as shown:
• Each low-speed link (LSL) counts as 1 link• Each ATM high speed link (HSL) counts as 1 link• Each SE-HSL counts as 1 link• For IPLIM, each association counts as 1 link• For IPGW, 1 link per card• For IPSG, each association counts as 1 link
The E5-OAM Integrated Measurements feature requires the following hardware and provisioning inthe system:
• E5-based control cards (E5-MASP cards and E5-MDAL cards)• Ethernet port A provisioned on the E5-MCAP card portions of the E5-MASP cards• The E5-OAM Integrated Measurements feature enabled and turned on• The E5-OAM Integrated Measurements collection option turned on in the MEASOPTS table• A provisioned customer FTP server
To mitigate network failures that could cause lost reports, it is recommended that you provisionup to three FTP servers for E5-OAM Integrated Measurements. Refer to the Database Administration- System Management User's Guide for information about configuring the FTP servers for E5-OAMIntegrated Measurements. If a network failure is on or near the EAGLE OAM IP link, then a lossof reports on the server is possible. The E5-OAM card will not switch activity if the IP link isunavailable on the active MASP. An alarm is generated, but the role change is a manual action.You can run on-demand reports to retrieve the data.
• The EAGLE OA&M IP Security feature, and Secure Shell FTP (SFTP) as a client, if secure transferis used
After collection of the measurements, scheduled reports are automatically generated and transferredfrom an E5-MASP card to a customer FTP server using the FTP interface. Existing FTP file serverreports are overwritten by subsequent requests that produce the identical file name.
Reports can be scheduled or generated on demand using the following commands:
• chg-measopts:
• Turns on the E5-OAM Integrated Measurements collection option
• Turns on or turn off the 15 Minute Measurements collection function
• Enables or disables the automatic generation and FTP transfer of scheduled measurementsreports to the FTP server
• Turns on or off the CLLI-based file name option for measurements reports files
• Turn on or off the unchannelized link label option
• chg-meas: Enables report generation. The complete command that you must enter so thatmeasurement reports are generated is chg-meas:collect=on.
27E86977 Revision 1, July 2017
MeasurementsMeasurements
• chg-mtc-measopts: Enables or disables the automatic generation and FTP transfer of scheduleddaily and hourly measurement reports to the FTP server.
• rept-stat-meas: Reports the status of the measurements subsystem including card location andstate, E5-MASP and IP link state, Alarm level, and Subsystem State.
• rept-ftp-meas: Manually initiates generation and FTP transfer of a measurements report fromthe E5-MASP card to the FTP server.
• rtrv-measopts: Displays the status of E5-OAM Integrated Measurements collection, scheduledreports, 15-Minute Measurements collection, CLLI-based file names, and unchannelized link label.
• rtrv-mtc-measopts: Displays the enabled or disabled status of all FTP scheduled measurementsreports.
Note: If a new entity is provisioned in place of a deleted entity, then the measurements for the deletedentity are set to zero. The reported peg counts apply only to the new entity.
When the E5-OAM Integrated Measurements feature is used in the system,
• The rept-meas command cannot be used for the lnp, np, and mapscrn entity types, because thefile transfer area (FTA) is disabled. Use the rept-ftp-meas command for those entity types.
• Scheduled UI reports are allowed if the system has up to 700 links, and are disabled it the systemhas more than 700 links.
Data Mirroring
The measurements data that is collected at interval, as well as the derived data that is periodicallycomputed, is stored on the active/primary collection platform and mirrored on the standby/secondaryplatform. Any MEAS reports generated after the role change are identical to the reports generatedbefore the role change. The duplication of the collected data provides an additional measure of reliabilityfor the Measurements Subsystem.
In the event that the standby/secondary platform is unavailable when the mirroring occurs, that datais retained on the active/primary, but it is not retained on the standby/secondary. If a role changeoccurs, any data collected while the standby/secondary was unavailable will not be available forreporting. A second role change is required if it is necessary to report the missing data.
Optional 15-Minute Measurements
Optional 15-minute measurements are available when the 15-minute measurement option is on andeither the Measurements Platform is configured or the E5-OAM Integrated Measurements feature isturned on. This option can change the duration for 30-minute reports to 15 minutes. The MeasurementsPlatform and the E5-OAM Integrated Measurements feature have the capability to collect and reportSTP, link, and linkset measurements on a 15-minute basis. All of the measurements available for30-minute collection are available every 15 minutes when the feature option is operational.
Note: Scheduled UI reports are disabled when the 15-minute measurements feature is enabled.
28E86977 Revision 1, July 2017
MeasurementsMeasurements
The feature is controlled by a measurement option. Turning on the feature requires a part number.The feature cannot be turned off once turned on. It is a Permanently ON feature. Upon turn on, thecollection period defaults to the 30-minute option. Refer to the Database Administration - SystemManagement User's Guide for details on implementing the 15-minute measurements feature.
The feature becomes operational when the collection period has been changed to 15 minutes. Thecollection period is changed from 30 minutes to 15 minutes (and vice versa) by using thechg-measopts:collect15min command. Refer to the Commands User's Guide for detailed usageinformation. When the 30-minute option is selected, measurements data is collected and reported eachhalf-hour at hh:00 and hh:30. When the 15-minute option is selected, measurements data is collectedand reported four times each hour at hh:00, hh:15, hh:30, and hh:45. The current state of the option isdisplayed with the Measurements Platform and E5-OAM Integrated Measurements feature options.Report types supported by 15-minute measurements are:
• systot (STP system totals)
• comp (Component)
• gtwy (Gateway)
• avl (Availability)
After 15-minute measurements collection and reporting is operational, 15-minute reports are retrievedusing rept-meas or rept-ftp-meas commands. Refer to the Commands User's Guide for detailedusage information.
Data Collection
The various scenarios for making 15-minute collection operational, and the impact on data collectionare shown in Table 3: Enabling 15-Minute Measurements - Impacts. The first column specifies the fourquarter-hour intervals during which 15-minute collection could be made operational. The secondcolumn identifies the impact of making 15-minute collection operational during the specified timewindow. If 15-minute collection is made operational during the first or third quarter hour, there is noimpact on the collected data. If 15-minute collection is made operational during the second or fourthquarter hour, the data that is collected and stored for that quarter-hour actually represents 30 minutesof data. This is not an error and no measurements data is lost. Rather it is a side effect of making15-minute collection operational after the previous quarter-hour boundary has already passed.
Table 3: Enabling 15-Minute Measurements - Impacts
Data LossImpact on Data Collection
Time Window for Making15-Minute MeasurementsOperational
None15 minutes of data will becollected for the quarter-hourxx15
xx00 to xx15
NoneThe xx15 interval will contain nodata. The xx30 interval willcontain 30 minutes of data
xx15 to xx30
29E86977 Revision 1, July 2017
MeasurementsMeasurements
Data LossImpact on Data Collection
Time Window for Making15-Minute MeasurementsOperational
None15 minutes of data will becollected for the quarter-hourxx45
xx30 to xx45
NoneThe xx45 interval will contain nodata. The xx00 interval willcontain 30 minutes of data
xx45 to xx00
Some quarter-hour measurements data may not be available for 24 hours after making 15-minutecollection operational. This condition exists for quarter-hour intervals for which 15-minute collectionhas not yet occurred. Data that was collected on a 30-minute basis is available for reporting for up to24 hours after it is collected. After the 15-minute collection option is enabled, this data remains availableon a half-hour basis (xx00 and xx30) but is not available on a quarter-hour basis (xx15 and xx45). Afterthe 15-minute collection option has been enabled for 24 hours, all 15-minute measurements data isavailable on a quarter-hour basis (xx00, xx15, xx30, and xx45).
In addition, full 30-minute data coverage will not be available until 24 hours after making 15-minutecollection not operational. Reports for specific periods will always contain the amount of data collectedfor that period. If SEAS reporting is enabled, for 24 hours after 15-minute measurements are madenot operational, 30-minute demand SEAS reports for time periods prior to feature status change willonly contain 15 minutes of data, and SEAS will not support reporting at the xx15 and xx45 times.
Also note that in the exception case of making 15-minute collection not operational, if the feature ismade not operational in the first 15 minutes of a half-hour (xx00-xx15 or xx30-xx45) and a demandreport is requested in the second 15 minutes of a half-hour (xx15-xx30 or xx45-xx60) for period=last(or period unspecified), the report given will be the last 15-minute interval (xx00-xx15 or xx30-xx45),not the last collected 15-minute interval (xx45-xx00 or xx15-xx30). Note that collection did not occurduring this 15-minute period, and Measurements data not current will be issued. To get a report forthe last collected 15-minute interval, period=specific has to issued with the command with the correctQH/HH value.
If the feature control status of 15-minute measurements is turned on and a report is requested for theactive interval (period=active) prior to the next scheduled measurements collection (based on the current15-minute measurements status), then the data will be correct but the starting time for the periodshown in the report will be incorrect. As soon as the next scheduled collection occurs, then activereports will show the correct data and the correct starting time.
A similar limitation also exists for period=last. If the feature control status of 15-minute measurementsis turned on and a report is requested for the last interval prior to the next scheduled measurementscollection (based on the current 15-minute measurements status), then the start and end times for theperiod shown in the report will be incorrect. The data presented in the report will correspond to thestart and end times. As soon as the next scheduled collection occurs, then period=last reports will showthe correct start and end times and the corresponding data for that interval.
If collection has not occurred since changing the operation status, then period=specific needs to be issuedto get the last period collected.
30E86977 Revision 1, July 2017
MeasurementsMeasurements
Reports
Reports can be scheduled or printed on-demand. Scheduled and on-demand reports are accessible bythe following administrative commands:
• chg-measopts: Used to enable or disable the automatic generation and FTP transfer of scheduledmeasurement reports to the FTP server.
• rept-ftp-meas: Manually initiates generation and FTP transfer of a measurements report fromthe MCPM to the FTP server (Measurements Platform) or from the E5-MASP to the FTP server(E5-OAM Integrated Measurements).
• rtrv-measopts: Generates a user interface display showing the enabled/disabled status of allFTP scheduled reports.
• chg-mtc-measopts: Enables or disables the automatic generation and FTP transfer of scheduledmaintenance measurements reports to the FTP server.
• rtrv-mtc-measopts: Shows the enabled/disabled status of all hourly and daily scheduledmaintenance measurements reports.
Refer to the Commands User's Guide for more information on how to use measurement commands.
Characteristics
Reports have the following characteristics.
• Categories
The following are the categories and types of measurement reports collected by the EAGLE:
• Traffic Engineering Reports
• STP system totals (SYSTOT)
• Component measurements (COMP)
• Network management (NM)
• Error Tracking/Troubleshooting Reports
• Daily availability (AVLD)
• Day-to-hour availability (AVLDTH)
• Availability (AVL)
• Maintenance Reports
• Daily maintenance measurements (MTCD)
• Day-to-hour maintenance measurements (MTCDTH)
• Hourly maintenance measurements (MTCH)
• Network Usage Reports
31E86977 Revision 1, July 2017
MeasurementsMeasurements
Gateway (GTWY)•
• Record Base (RBASE)
• Maintenance Status Reports
• Maintenance Status Indicators (MTCS)
• Entity Types
The following entity types may be reported for a particular category type.
• AIQ: ANSI41 AIQ
• ATINPQ: Any-Time Interrogation Number Portability Query
• DEIR: S13 EIR Interface
• EIR: Equipment Identity Register
• ENUM: EAGLE ENUM Mobile Number Portability and Tier One Address Resolution
• GTTAPATH: GTT Actions per path
• IDPR: IDP Pre-paid Relay Query
• LINK: Signaling link
• LNKSET: Linkset
• LNP: Local number portability
• LSDESTNI: Linkset destination network identifier
• LSONISMT: Per link set, per originating network identifier, per ISUP message type measurements
• LSORIGNI: Linkset originating network identifier
• MAPSCRN: Global Systems for Mobile Communications Mobile Application Part ScreeningMeasurements
• NP: Intelligent network application part-based number portability
• ORIGNI: Originating network identifier
• ORIGNINC: Originating network identifier for network cluster
• SCTPASOC: Per association SCTP layer
• SCTPCARD: Per card SCTP layer
• SFTHROT: SS7 Firewall Throttling GTT Action
• SIP: SIP Number Portability
• STP: All nodes
• STPLAN: TCP/IP links
• TT: Translation type
32E86977 Revision 1, July 2017
MeasurementsMeasurements
• UA: Per Application Server/Association UA layer
• VFLEX: Voice Mail Router measurements
• Accessible Periods
There are four accessible periods for which measurements may be reported:
1. Last is used to access the previous collection interval.
2. Specific is used to access a specific interval (for example, one of the previous 48 half-hourintervals).
3. Active is used to access measurements for the current collection interval.
4. All is used to access measurements for all collection intervals retained.
LSL and SE-HSL Reports
As of Release 44.0, low-speed MTP2 links and high-speed unchannelized MTP2 links can be identifiedseparately in the relevant reports.
The standard link label is "MTP2", and is applicable to all types of MTP2 links, regardless of the linkspeed. When the unchlinklabel functionality is provisioned to ON in the chg-measopts command,unchannelized links are labeled with "MTP2-UNCH", while low-speed links retain the "MTP2" label.The -UNCH label is also applied to linksets that contain unchannelized MTP2 links.
The label appears in scheduled and on-demand reports, for UI and FTP.
Measurements Platform/E5-OAM Integrated Measurements Feature Reports
Measurements Platform and E5-OAM Integrated Measurements reports have the followingcharacteristics.
Report Files
Report files are divided into three sections:
1. System header
The system header size varies depending on embedded data. A typical size of 250 bytes is used inall calculations in the examples in this manual.
2. Individual report header
The report header size varies depending on the report type, but is always the same size for anindividual report type. The size of the report data section varies depending on the number ofentities being reported, and the particular data items being reported for each entity (for example,a count of 0 versus a large count).
3. Report data
For the estimates given in this manual, 6 characters are assumed for each data item, including thecomma delimiter. Other variable quantities, such as the number of entities in the report, are statedwith each example.
33E86977 Revision 1, July 2017
MeasurementsMeasurements
The output file sizes calculated in this manual are rough estimates only. They are not intended to bean exact representation of output file size, which could vary significantly depending on the configurationof a particular system.
Table 4: Measurements Platform and E5-OAM Integrated Measurements Feature System Header
UnitDescriptionField Name
ASCII TextThe Common LanguageLocation Identifier for the STP
CLLI
ASCII TextThe software release currentlyrunning on the STP
SWREL
YYYY-MM-DDThe date on which the reportwas generated
RPTDATE
HH:MM:SSThe time at which the report wasgenerated (24-hour clock)
RPTIME
ASCII TextAn abbreviation for the timezone
TZ
ASCII TextThe type of report beinggenerated
RPTTYPE
ASCII TextThe period of the reportRPTPD
YYYY-MM-DDThe date for the report intervalIVALDATE
HH:MM:SSThe starting time of the reportinterval
IVALSTART
HH:MM:SSThe ending time of the reportinterval
IVALEND
IntegerThe number of entities containedin the report
NUMENTIDS
Example header format:
"CLLI","SWREL","RPTDATE","RPTIME","TZ","RPTTYPE","RPTPD","IVALDATE","IVALSTART","IVALEND","NUMENTIDS"<cr><lf>"tekelecstp","31.3.0-39.1.0","1999-01-17","15:51:37","EST","STP SYSTEM TOTAL MEASUREMENTS ON STP","LAST","1999-01-17","15:00:00","15:30:00",1<cr><lf><cr><lf>
File Naming Conventions
File names consist of fields separated by underscores and followed by the .csv extension. This formatallows the files to be readily identified as a comma-separated value (CSV) format. Due to the overalllength of the file names, long file names (beyond 8.3 format) are utilized.
34E86977 Revision 1, July 2017
MeasurementsMeasurements
• CLLI-based Names Disabled
These file names consist of three fields identified as follows:
• Up to 13 characters for the report type (sched-entity, for example, systot-stp or mtcdth-lnkset)
• 8 characters for the report date (yyyymmdd). This reflects the date the data is generated.
• 4 characters for the ending report time (hhmm). This is defined as the common boundarybetween the end of the last period and the beginning of the next period. For example, the halfhour from 2:00PM to 2:30PM would end at 1430. A day-to-hour period ends on the hour. Adaily period or specific request for the final hour or half-hour of a day ends at 2400, midnight.
Examples of output file names:
• Half hourly STP system totals generated 1999-02-24 at 15:22:00 for the last period would be (theperiod from 1430 to 1500 on 02/24/99):
systot-stp_19990224_1500.csv
• Maintenance daily linkset report generated 2001-07-17 at any time would be (the period from0000 to 2400 on 07/16/01):
mtcd-lnkset_20010716_2400.csv
• Maintenance day-to-hour link report generated 2003-04-29 at 08:32:00 would be (the periodfrom 0000 to 0800 on 04/29/03):
mtcdth-link_20030429_0800.csv
• Half hourly STP system totals generated 1999-02-23 at 00:15:20 for the specific end time 0030would be (the period from 0000 to 0030 on 02/23/99):
systot-stp_19990223_0030.csv
• Half hourly STP system totals generated 1999-02-24 at 00:15:30 for the specific end time 2330would be (the period from 2300 to 2330 on 02/23/99):
systot-stp_19990223_2330.csv
• Half hourly STP system totals generated 1999-02-24 at any time for the specific end time 2400or 0000 would be (the period from 2330 to 2400 on 02/23/99):
systot-stp_19990223_2400.csv
Some applications will reformat fields when opening the .csv file. Use a text editor when opening.csv files to examine file content as presented in the output file examples in this document.
• CLLI-based Names Enabled
These file names consist of four fields identified as follows:
• Up to 11 characters for the CLLI of the EAGLE.
• Up to 13 characters for the report type (sched-entity, for example, systot-stp or mtcdth-lnkset)
• 4 characters for the report date (mmdd). This reflects the date the data is generated.
• 4 characters for the ending report time (hhmm). This is defined as the common boundarybetween the end of the last period and the beginning of the next period. For example, the half
35E86977 Revision 1, July 2017
MeasurementsMeasurements
hour from 2:00PM to 2:30PM would end at 1430. A day-to-hour period ends on the hour. Adaily period or specific request for the final hour or half-hour of a day ends at 2400, midnight.
Examples of output file names:
• Half hourly STP system totals generated 02-24 at 15:22:00 for the last period would be (theperiod from 1430 to 1500 on 02/24:
wnrtpaah01w_systot-stp_0224_1500.csv
• Maintenance daily linkset report generated 07-17 at any time would be (the period from 0000to 2400 on 07/16:
wnrtpaah01w_mtcd-lnkset_0716_2400.csv
• Maintenance day-to-hour link report generated 04-29 at 08:32:00 would be (the period from0000 to 0800 on 04/29:
wnrtpaah01w_mtcdth-link_0429_0800.csv
• Half hourly STP system totals generated 02-23 at 00:15:20 for the specific end time 0030 wouldbe (the period from 0000 to 0030 on 02/23):
wnrtpaah01w_systot-stp_0223_0030.csv
• Half hourly STP system totals generated 02-24 at 00:15:30 for the specific end time 2330 wouldbe (the period from 2300 to 2330 on 02/23):
wnrtpaah01w_systot-stp_0223_2330.csv
• Half hourly STP system totals generated 1999-02-24 at any time for the specific end time 2400or 0000 would be (the period from 2330 to 2400 on 02/23/99):
wnrtpaah01w_systot-stp_0223_2400.csv
Some applications will reformat fields when opening the .csv file. Use a text editor when opening.csv files to examine file content as presented in the output file examples in this document.
Measurement Interval Status Criteria
The STATUS Event Name in the measurement reports provides the reported collection status, asdescribed in Table 5: Measurement Interval Status Criteria.
Table 5: Measurement Interval Status Criteria
DescriptionEvent Name
Indication of Data ValiditySTATUS
K indicates good data. The basic rule to mark a measurement report as K is that theregisters are pegged for the complete interval and the cards collecting the registersare IS-NR for the entire interval.
I indicates an incomplete interval. This indicates that the registers were not peggedfor the complete interval or the cards collecting the registers were not IS-NR for theentire interval. There can be a case in which OAM or MCPM sends measurementcollection requests to the LIM or SERVICE cards, but the cards did not collect anydata and/or failed to send that data to the OAM or MCPM for the complete interval.
36E86977 Revision 1, July 2017
MeasurementsMeasurements
DescriptionEvent NameIn such a case the reports are generated and stored with zeroes for the register values,which indicates that measurements are running on the EAGLE but that theLIM/SERVICE cards are ISOLATED or OOS-MT-DSBLD.
N indicates data not current, no data was collected. All register values will containzeros, which are to be interpreted as unknown.
Report Limitations
The measurement registers of a system total report can store a maximum count of 4294967295 (size ofthe register), after which the register will roll over to 0. This limitation puts constraint on the numberof the following cards that can run at the maximum card TPS in the system, or on the value of maximumTPS that can be processed by the maximum number of those cards allowed in the system:
• ENUM
• Up to 12 ENUM cards can run at the maximum advertised TPS (4000) in the system withoutexceeding the count capacity.
• The maximum allowed 16 ENUM cards can run at a maximum of 3100 TPS in the system withoutexceeding the count capacity.
• The maximum allowed 16 ENUM cards running at maximum card TPS of 4000 can run for 18hours before the count capacity is exceeded.
• SIP
• Up to 12 SIP cards can run at the maximum advertised TPS (4000) in the system withoutexceeding the count capacity.
• The maximum allowed 16 SIP cards can run at a maximum of 3100 TPS in the system withoutexceeding the count capacity.
• The maximum allowed 16 SIP cards running at maximum card TPS of 4000 can run for 18 hoursbefore the count capacity is exceeded.
• S13
• Up to six S13 cards can run at the maximum advertised TPS (8000) in the system withoutexceeding the count capacity.
• The maximum allowed 16 S13 cards can run at a maximum of 3100 TPS in the system withoutexceeding the count capacity.
• The maximum allowed 16 S13 cards running at maximum card TPS of 8000 can run for ninehours before the count capacity is exceeded.
These limitations do not affect the processing of traffic. If the limitations are exceeded, then the valueof the measurements register will roll over after reaching its maximum value and the pegging will beincorrect.
37E86977 Revision 1, July 2017
MeasurementsMeasurements
Chapter
3Reports
Topics:
• Report Tables.....39• STP System Totals Measurements (SYSTOT)..39• Component Measurements (COMP).....72• Network Management Measurements (NM)...106• Daily Availability Measurements (AVLD).....124• Day-To-Hour Availability Measurements
(AVLDTH).....133• Availability Measurements (AVL).....140• Daily Maintenance Measurements (MTCD)...153• Day-to-Hour Maintenance Measurements
(MTCDTH).....240• Hourly Maintenance Measurements (MTCH).285• Gateway Measurements (GTWY).....329• Record Base Measurements (RBASE).....345• Maintenance Status Reports (MTCS).....359
38E86977 Revision 1, July 2017
Report Tables
The tables that follow in this chapter define the parameters used in the measurement reports. Includedin the tables are the event name, description and unit of measurement as described in TelcordiaGR-82-CORE.
The Example Commands and the Example Outputs are separated according to the collection methodused to report measurements.
• FTP - Indicates measurements that are transferred to the customer's FTP server via the FTP interface.
• UI - Indicates measurements that are output on the terminal interface.
Note: The Status Event Name appearing in the Measurement Tables only appears when using theMeasurements Platform or E5-OAM Integrated Measurements. The Example Outputs and the ExampleInputs are examples. Variations exist and are likely. Refer to the Commands User's Guide for complete(options, variables) information on command usage.
If the Measurements Platform is enabled, the chg-meas:collect=off command can be used todisable the scheduled UI report output without affecting the actual collection. If UI based reports aredisabled via this mechanism, then the Traffic Unsolicited Output Message Group may be turned offsince there is no output directed to it.
STP System Totals Measurements (SYSTOT)
These measurements are used to monitor the overall performance of the STP.
Entity types: STP, Translation Type (TT), STPLAN, IDPR, SIP, SFTHROT
Accumulation interval: Every 30 minutes
Optional Accumulation Interval: Every 15 minutes
STP retention period: 24 hours
Reporting modes: Scheduled, On-Demand
Accessible collection periods: Last, Specific
STP SYSTOT Report
STP SYSTOT reports are an aggregation of the counters from OAM, SCCP, and LIM cards. If any ofthe cards are ISOLATED/OOS during a measurement interval, the report is marked I. The report ismarked K only when the OAM, SCCP, and LIM cards are IS-NR throughout the entire measurementinterval.
Example Commands:
UI: rept-meas:type=systot:enttype=stp
FTP: rept-ftp-meas:type=systot:enttype=stp
39E86977 Revision 1, July 2017
ReportsMeasurements
Table 6: STP System Total STP Measurements
UnitDescriptionEvent Name
peg countNumber of Critical SystemAlarms - The total number ofcritical system alarms.
CRSYSAL
peg countDN Table Not Present - Thetotal number of MSUs that
DNTBLNOP
require DN service but thatarrise on an IMSI ServiceModule, which does not containEPAP DN data
peg countDTAMSUs Lost - The totalnumber of MSUs that were
DTAMSULOST
discarded because the originalMSU was too large to beencapsulated.
milli-secondsDuration of Internal NodeFailure - Total time that
DURINTFL
messages could not be switchedto outgoing link (apart from anylink interface failure).
peg countG-Flex GTTs with Match - Thetotal number of G-Flex Global
GFGTMATCH
Title Translations successfullycompleted.
peg countG-Flex GTTs No Match - Thetotal number of G-Flex Global
GFGTNOMCH
Title Translations completed thatdid not match an entry in theGSM database.
peg countG-FlexGTTs No Look-up - Thetotal number of G-Flex Global
GFGTNOLKUP
Title Translations that could notbe looked up in the GSMdatabase because of an error, i.e.,when the G-Flex SCCP CdPAverification fails.
peg countGTTs Performed - Usually, thetotal number of MSUs that
GTTPERFD
successfully completed globaltitle translation (GTT). Alsoincludes G-Port and INPMSUs
40E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
that got a match in either theG-Port, INP, or GTT DB.
Sometimes, GTTPERFD indicatesthe total number of global titletranslations (GTTs) performedon MSUs that successfullycompleted GTT, because severalGTTs may happen for the sameMSU. One scenario wheremultiple GTTs occur for an MSUoccurs is when the ANSI/ITUSCCP Conversion Feature isactivated. In this case, the countfor GTTPERFD can be doublewhat it would be without thefeature, although the number ofMSUs received by the EAGLEdid not change.
peg countGTTs Unable to Perform -Diagnostic 0: No Translation for
GTTUN0NS
Address of Such Nature - Thesum total of times that thespecified type of translation inan MSU was not supported bythe STP.
This register contains the sum ofthe GTTUN0NS register in thesystot-tt report and theCGGTTUN0NS register in thesystot-cgtt report.
peg countGTTs Unable to Perform -Diagnostic 1: No Translation for
GTTUN1NT
This Address - The sum total oftimes that SCCP could not finda translation in the translationtable. This includes Global Titletranslations, Point Codetranslations, and Subsystemtranslations.
This register contains the sum ofthe GTTUN1NT register in thesystot-tt report and theCGGTTUN1NT register in thesystot-cgtt report.
41E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
peg countThe number of messagescounted by IARTOTAL that
IARFAILD
were dismissed due to one of theproblems reported by the UIMsthat are specific to the IAR Basefeature (that is, UIM 1020..1021and 1427..1431).
peg countThe number of messagescounted by IARTOTAL that
IARNOTAP
were not counted by IAR PASSDor IARFAILD; theThey weredismissed because modificationwas determined to beinappropriate (that is, notapplicable). This excludesmessages that were dismissedbecause of no matching entry indatabase (GT and TRIG CSL list,DPC (not Home SCP), NPP Rule,RTDB).
peg countThe number of messagescounted by IARTOTAL that
IARPASSD
were modified by the IAR basefeature. The IAR Base must havechanged the CdPN parameter,CgPN parameter, or both.
peg countThe total number of messagesreceived by the IAR Base feature
IARTOTAL
from TTR Service Selection; thetotal number to which IARpre-processing is applied. Thesum of the IARNOTAP,IARPASSD, and IARFAILD pegsand messages that weredismissed because there was nomatching entry in database: GTand TRIG CSL list/DPC (notHome SCP), NPP Rule, RTDB.
peg countTotal number of IDP/IDPSMSmessages that were selected for
IDPAPTYGTT
A-Party Routing service, but fellthrough to GTT (with or withouthaving attempted SK routingfirst).
peg countTotal number of IDP/IDPSMSmessages that were selected for
IDPAPTYRTD
42E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
A-Party Routing service, andwere successfully routed basedon A-Party PPSOPTS routingdata (that is, routing dataassociated with the RTDB PTassigned to the A-Party digits).
peg countTotal number of IDP/IDPSMSmessages that were selected for
IDPAPTYSKR
A-Party Routing service, but fellthrough to Service Key Routing,and were successfully routedbased on SK/BCSM PPSOPTSdata (that is, routing dataassociated with the RTDB PTassigned to the SK/BCSM entry).
peg countTotal number of IDP/IDPSMSmessages received that matched
IDPBKLCONN
the blacklist criteria and aCONNECT response wasgenerated.
peg countTotal number of IDP/IDPSMSmessages received that did not
IDPBKLCONT
match the blacklist criteria anda CONTINUE response wasgenerated.
peg countThe total number of MSUsselected for IDPR service which
IDPRMSERR
could not be processed due toerrors in encoding, decoding, orformatting, or IDP A-Partyrouting, or IDP SK Routing.
peg countTotal number of MSUs selectedfor IDPR service which fell
IDPRMSFAIL
through to GTT due to (1) nomatch on MSISDN in MNPDB,or (2) match on MSISDN but noassociation to RN or SP forCDPNNP or CGPNNP, (3) nomatch for IDP A-Party Blacklistquery-response criteria or, (4)IDP Blacklist relay resulted infalling through to GTT forrouting, or (5) IDP A-Party or SKRouting resulted in fallingthrough to GTT routing (due to
43E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
no-match on MSISDN orinsufficient data).
peg countTotal number of MSUs receivedand selected for IDPR service.
IDPRMSRCV
This register includes counts forMSUs that resulted in bothsuccessful and unsuccessfulMNPDB lookups.
peg countNumber of MSUs selected forIDPR service for which the
IDPRMSSUCC
requested IDPR feature setfunctionalities were executedsuccessfully. This includes pegsto IDPAPTYRTD, IDPSKRTD,IDPBKLCONN, andIDPBKLCONT registers.
peg countTotal number of IDPs that wereselected for Service Key Routing
IDPSKGTT
(without having first gone toA-Party Routing), but fellthrough to GTT.
peg countTotal number of IDP/IDPSMSmessages that were selected for
IDPSKRTD
Service Key Routing (withouthaving first gone to A-PartyRouting), and were successfullyrouted based on SK/BCSMPPSOPTS data.
peg countIMSI Table Not Present - Thetotal number of MSUs that
IMSITBLNOP
require IMSI service but thatarrise on a DN Service Module,which does not contain EPAPDN data
peg countNumber of Major SystemAlarms - The total number ofmajor system alarms.
MASYSAL
peg countNumber of Minor SystemAlarms - The total of minorsystem alarms.
MISYSAL
peg countTotal number of TC_CONTINUEmessages (with Component
MOSMSSEGER
Portion) discarded by the
44E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
Portability Check for MO SMfeature.
peg countTotal number of TC_CONTINUEmessages (with Component
MOSMSSEGOK
Portion) relayed successfully bythe Portability Check for MOSMS and/or MO-based SMS NPfeature.
peg countTotal number of IDP messagesthat did not fully meet the
MSIDPNOMCH
criteria of the IDP Screening forPrepaid feature. These messagesare relayed to their destinationby GTT.
peg countTotal number of IDP messagesthat did meet the criteria of the
MSIDPMATCH
IDP Screening for Prepaidfeature. Instead of sending theIDP message onward, aContinue message is sent to theoriginating MSC. The criteriainvolves matching the followingTCAP fields with EAGLECommon Screening Lists:
1. CgPA and CdPA areprovisioned in the In-NetworkSubscriber List.
2. The Teleservice and ServiceKey values are in the ServiceKey/Teleservice List.
peg countMSUs Rcvd – Invalid DPC -Number of MSUs received and
MSINVDPC
discarded because the DPCcould not be found in the STProuting table.
peg countMSUs Discarded – Invalid Link- Number of MSUs discarded
MSINVLNK
because of an incorrect SLC. (TheSLC refers to a nonexistent linkor the same link.)
peg countMSUs Discarded – Invalid SIF-Number of MSUs that have been
MSINVSIF
45E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
received and discarded becauseof an invalid SIF.
peg countMSUs Rcvd – Invalid serviceindicator octet (SIO) - Number
MSINVSIO
of MSUs received and discardedbecause the service requested inthe service indicator octet (SIO)was not supported by the STP.
peg countMSUs Discarded – Invalid SLC- Number of MSUs discarded
MSINVSLC
because of an invalid SLC codein the ECO/COO.
peg countMSUs Discarded – InaccessibleDPC - The total number of MSUs
MSNACDPC
discarded because of aninaccessible DPC.
peg countMSUs Discarded - Translationfound, but provisioned ACTIONcaused the MSU to be discarded.
MSSCCPDISC
peg countMSUs Discarded – RoutingFailure - Number of MSUs
MSSCCPFL
discarded due to an SCCProuting failure.
peg countMSUs Discarded – GatewayScreening- The total number of
MSUDSCRD
MSUs that failed gatewayscreening and were discarded.See linkset report for individualpeg counts.
peg countMSUs Discarded – Level2/Level 3 Queue Full - Number
MSULOST1
of MSUs discarded because thelevel 2 to level 3 queue was full.
peg countMSUs Discarded – Route OnHold Buffer Overflow - Number
MSULOST2
of MSUs discarded because therouting buffer was in overflow.
peg countMSUs Discarded –MSULOST3
1. LS On Hold BufferOverflow - The number ofMSUs discarded because the
46E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
linkset-on-hold buffer was inoverflow. The On HoldBuffer is used duringchangeover/changebacksituations to ensure thattraffic is sequenced correctly.During changeover andchangeback, MSUs that wereoriginally sent over linkswhich are now failed (notIS-NR) are buffered while thechangeover/changebackprocedures are carried out.Once those procedures arecompleted, the traffic in theon-hold buffer is routedbased on the currentconfiguration.
2. LSL LIM does not have SCCPassignment for receivedSCCP traffic.
3. HSL –
• All Class 1 (sequenced)GTT traffic addressed toEAGLE
• A Class 0 GTT messagefor EAGLE arrives whenthe SCCP TVG queue isfull
• A GTT message in theSCCP TVG queue is morethan 2 seconds old.
peg countMSUs Discarded – Rcvd QueueFull - Number of MSUs
MSULOST4
discarded because the receivequeue was full.
peg countMSUs Discarded – LIM Init -Number of MSUs discarded
MSULOST5
while the LIM card wasinitializing.
peg countMSUs Discarded - The numberof MSUs discarded due to an
MSULOST6
error encountered duringinternal (IMT) transfer of MSUbetween cards.
47E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
peg countMSUSCCP Failure - TotalMSUs Discarded Due to SCCPConversion Failure.
MSUSCCPFLR
xact per secondThe current daily system-widepeak SCCP message handlingload in transactions per second.
NMSCCPMH
peg countMSUs Originated – InvalidDPC - Number of MSUs with aninvalid DPC.
OMSINVDPC
peg countOriginated MSUs - Totalnumber of outgoing MSUs
ORIGMSUS
successfully passed to MTP level2 for transmission, whilecarrying the STP point code inthe OPC field.
octetsOriginate MSU Octets - Totalnumber of outgoing octets
ORMSUOCT
associated with MSUs carryingthe STP point code in the OPCfield. This includes octets addedin MTP level 2 processing.
peg countOversized MTP 3 Messages -Number of messages received
OVSZMSG
by an HSL that exceeds 272octets (level 3) and is discarded.
xact per secondThe overall system-wide peakSCCP message handling load in
PKSCCPMH
transactions per second. Valueis the highest recorded since itwas last reset using therept-stat-sccp:mode=peakresetcommand.
peg countTotal number of successful DPClookups in PCT feature.
PCTDPCLKP
peg countTotal number of successful OPClookups in PCT feature.
PCTOPCLKP
peg countTotal number of times that aGTT translation matched a Point
SCCPLOOP
Code in the STP’s loopset entriesresulting in either a notify ordiscard of an SCCP message.
48E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
statusIndication of Data ValiditySTATUS
K indicates good data
I indicates incomplete interval
N indicates data not current.
peg countThrough-Switched MSUs - Thetotal number of MSUs that did
THRSWMSU
not carry the STP point code inthe OPC or the DPC, and weresuccessfully passed to MTP level2 for transmission.
peg countTerminated MSUs - The totalnumber of incoming MSUs
TRMDMSUS
carrying the STP point code inthe DPC.
octetsTerminated MSU Octets - Thetotal number of octets associated
TRMSUOCT
with incoming MSUs carryingthe STP point code in the DPC.Includes octets removed in MTPlevel 2 processing.
octetsThrough-Switched MSU Octets- The total number of octets
TSMSUOCT
associated with MSUs that didnot carry the STPs point code inthe OPC or the DPC, and weresuccessfully passed to MTP level2 for transmission.
peg countTotal number of messages forwhich UDT(S) to XUDT(S),
UDTXUDTF
XUDT(S) to UDT(S) orSegmented XUDT(S) to UDT(S)conversion has failed.
peg countX-List Entry Not Created - Thetotal number of times that an
XLXTELEI
x-list was not created because theException List ExclusionIndicator (ELEI) for the clusteris set to yes.
peg countX-List Entry Not Created - Thetotal number of times an x-list
XLXTSPACE
entry was not created because
49E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
there is no more space in theroute/destination table.
UI Example Output:
e1061001 11-01-22 02:24:36 MST EAGLE5 43.0.0-63.49.0 TYPE OF REPORT: STP SYSTEM TOTAL MEASUREMENTS ON STP REPORT PERIOD: LAST REPORT INTERVAL: 11-01-22, 01:30:00 THROUGH 01:59:59
STP-SYSTOT MEASUREMENTS
These measurements are from 11-01-22, 01:30:00 through 01:59:59. ORIGMSUS = 0, TRMDMSUS = 0, THRSWMSU = 0, ORMSUOCT = 0, TRMSUOCT = 0, TSMSUOCT = 0, DURINTFL = 0, DTAMSULOST = 0, MSINVDPC = 0, MSINVSIO = 0, OMSINVDPC = 0, MSINVLNK = 0, MSINVSIF = 0, MSNACDPC = 0, MSINVSLC = 0, GTTPERFD = 0, GTTUN0NS = 0, GTTUN1NT = 0, MSSCCPFL = 0, MSULOST1 = 0, MSULOST2 = 0, MSULOST3 = 0, MSULOST4 = 0, MSULOST5 = 0, CRSYSAL = 2, MASYSAL = 3, MISYSAL = 19, XLXTSPACE = 0, XLXTELEI = 0, MSUDSCRD = 0, OVSZMSG = 0, GFGTMATCH = 0, GFGTNOMCH = 0, GFGTNOLKUP = 0, MSUSCCPFLR = 0, NMSCCPMH = 0, PKSCCPMH = 0, MSSCCPDISC = 0, IDPRMSRCV = 0, IDPRMSSUCC = 0, IDPRMSFAIL = 0, IDPRMSERR = 0, MSIDPNOMCH = 0, MSIDPMATCH = 0, MSULOST6 = 0, SCCPLOOP = 0, MOSMSSEGOK = 0, MOSMSSEGER = 0, IDPAPTYRTD = 0, IDPAPTYSKR = 0, IDPAPTYGTT = 0, IDPSKRTD = 0, IDPSKGTT = 0, IDPBKLCONN = 0, IDPBKLCONT = 0, IARTOTAL = 0, IARNOTAP = 0, IARPASSD = 0, IARFAILD = 0, UDTXUDTF = 0, PCTDPCLKP = 0, PCTOPCLKP = 0
FTP Example Output File Name:systot-stp_20090319_1530.csv
FTP Example Output File Format:
"CLLI","SWREL","RPTDATE","RPTIME","TZ","RPTTYPE","RPTPD","IVALDATE","IVALSTART","IVALEND","NUMENTIDS"
"e1061001","EAGLE5 43.0.0-63.49.0","2011-01-23","01:11:26","MST ","STP SYSTEM TOTAL MEASUREMENTS ON STP","LAST","2011-01-23","00:30:00","01:00:00",1
"STATUS","ORIGMSUS","TRMDMSUS","THRSWMSU","ORMSUOCT","TRMSUOCT","TSMSUOCT","DURINTFL","DTAMSULOST","MSINVDPC","MSINVSIO","OMSINVDPC","MSINVLNK","MSINVSIF","MSNACDPC","MSINVSLC","GTTPERFD","GTTUN0NS","GTTUN1NT","MSSCCPFL","MSULOST1","MSULOST2","MSULOST3","MSULOST4","MSULOST5","CRSYSAL","MASYSAL","MISYSAL","XLXTSPACE","XLXTELEI","MSUDSCRD","OVSZMSG","GFGTMATCH","GFGTNOMCH","GFGTNOLKUP","MSUSCCPFLR","NMSCCPMH","PKSCCPMH","MSSCCPDISC","IDPRMSRCV","IDPRMSSUCC","IDPRMSFAIL","IDPRMSERR","MSIDPNOMCH","MSIDPMATCH","MSULOST6","SCCPLOOP","MOSMSSEGOK","MOSMSSEGER","IDPAPTYRTD","IDPAPTYSKR","IDPAPTYGTT","IDPSKRTD","IDPSKGTT","IDPBKLCONN","IDPBKLCONT","IARTOTAL","IARNOTAP","IARPASSD","IARFAILD","UDTXUDTF","PCTDPCLKP","PCTOPCLKP""K",0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,2,3,19,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
Assuming the data line will be:
4 char status + 62*(avg. 6 chars per field) + 2 = 378 chars
Typical file size:
50E86977 Revision 1, July 2017
ReportsMeasurements
Table 7: Typical File Size: systot-stp.csv
File Size=Report Data+ReportHeader+
SystemHeader
1352 bytes=378+724+250
TT SYSTOT Report
When a GTT Actions feature is on with a feature that does translation based on the Called Party, theGTT measurements in this report (such as GTTADISC0) are updated.
Example Commands:
UI: rept-meas:type=systot:enttype=tt
FTP: rept-ftp-meas:type=systot:enttype=tt
Table 8: STP System Total Translation Type Measurements
UnitDescriptionEvent Name
peg countAdvanced CdPAGTTsPerformed - The total number of
AGTTPERFD
MSUs that successfully passedAdvanced CdPA Global TitleTranslation (AGTT). This registerappears in the SYSTOT-TTreport ONLY.
peg countFLOBR CDPA GTTs Performed- The total number of MSUs that
FCDGTTPRFD
successfully completed FlexibleCdPA Global Title Translation.This register appears in theSYSTOT-TT report ONLY.
peg countGTT Actions – MSUs Discarded- The total number of messages
GTTADISC0
discarded by the DISCARD GTTAction.
peg countGTT Actions – MSUs Discarded- The total number of messages
GTTADISC1
discarded by the UDTS GTTAction.
peg countGTT Actions – MSUs Discarded- The total number of messages
GTTADISC2
discarded by the TCAP ErrorGTT Action
51E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
peg countGTT Actions – MSUsDuplicated - The total number
GTTADUP
of messages for which DuplicateMSU was sent. Multipleduplicate actions in an action setshall also increment this registeronly once.
peg countGTT Actions – MSUsForwarded - The total number
GTTAFWD
of messages forwarded byForward GTT Action.
peg countGTT Actions - The total numberof messages receiving any GTTaction.
GTTASET
peg countGTTs Performed - Usually, thetotal number of MSUs that
GTTPERFD
successfully completed globaltitle translation (GTT). Alsoincludes G-Port and INPMSUsthat got a match in either theG-Port, INP, or GTT DB.
Sometimes, GTTPERFD indicatesthe total number of global titletranslations (GTTs) performedon MSUs that successfullycompleted GTT, because severalGTTs may happen for the sameMSU. One scenario wheremultiple GTTs occur for an MSUoccurs is when the ANSI/ITUSCCP Conversion Feature isactivated. In this case, the countfor GTTPERFD can be doublewhat it would be without thefeature, although the number ofMSUs received by the EAGLEdid not change.
peg countGTTs Unable to Perform -Diagnostic 0: No Translation for
GTTUN0NS
Address of Such Nature - Totalnumber of times that thespecified translation type in anMSU was not supported by theSTP or the form of the GTT wasincorrect for the given
52E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
translation type. Also includesG-Port, INP and GTT MSUs thatdid not match on new selectors(GTI,NP,NAI) in addition toones not matching on TT.
peg countGTTs Unable to Perform -Diagnostic 1: No Translation for
GTTUN1NT
This Address - Number of timesthat a match for the global titlecould not be found in thetranslation table. Also includesG-Port, INP MSUs that fellthrough to GTT, got a selectormatch, but still did not get amatch on the GTA.
peg countThe total number of messagesserviced by GFLEX GTT Action.
GTTASRVGFLX
peg countThe total number of messagesserviced by GPORT GTT Action.
GTTASRVGPRT
peg countThe total number of messagesserviced by SMSMR GTT Action.
GTTASRVSMSR
peg countThe total number of messagesserviced by SFLOG GTT Action.
GTTASFLOG
peg countThe total number of messagesthat successfully pass SCPVALGTT Action.
GTTAMSVTO
peg countThe total number of messagesdiscarded by SCPVAL GTTAction.
GTTAMSVDI
peg countThe total number of messageswhere validation was notapplied by SCPVAL GTT Action.
GTTAMSVNA
peg countTotal number of messages onwhich GTT is performed only onSCCP cards.
GTTONSM
peg countTotal number of messages onwhich GTT is performed only onGTT enabled IPSG cards.
GTTONLIM
peg countTotal number of messages wheremore than one component was
TMULTCOMP
53E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
searched for an OPCODEtranslation, even if no matchingtranslation was found (per TT).
statusIndication of Data ValiditySTATUS
K – indicates good data
I – indicates incomplete interval
N – indicates data not current.
UI Example Output:
> rept-meas:type=systot:enttype=tt:tt=1
eagle1 15-09-20 03:55:58 EST EAGLE5 46.3.0.0.0-66.11.0 TYPE OF REPORT: STP SYSTEM TOTAL MEASUREMENTS ON TT REPORT PERIOD: LAST REPORT INTERVAL: 15-09-20, 03:00:00 THROUGH 03:29:59
TT-SYSTOT MEASUREMENTS: TT: 1
These measurements are from 15-09-20, 03:00:00 through 03:29:59. GTTPERFD = 0, GTTUN0NS = 0, GTTUN1NT = 0, AGTTPERFD = 0, FCDGTTPRFD = 0, GTTADISC0 = 0, GTTADISC1 = 0, GTTADISC2 = 0, GTTADUP = 0, GTTAFWD = 0, GTTASET = 0, GTTASRVGFLX= 0, GTTASRVGPRT= 0, GTTASRVSMSR= 0, GTTASFLOG = 0, GTTAMSVTO = 0, GTTAMSVDI = 0, GTTAMSVNA = 0
;
FTP Example Output File Name: systot-tt_20150124_2230.csv
FTP Example Output File Format:
"CLLI","SWREL","RPTDATE","RPTIME","TZ","RPTTYPE","RPTPD","IVALDATE","IVALSTART","IVALEND","NUMENTIDS""e1061001","EAGLE5 46.3.0.0.0-66.11.0","2015-09-20","03:57:47","EST ","STP SYSTEM TOTAL MEASUREMENTS ON TT","LAST","2015-09-20","03:00:00","03:30:00",256"STATUS","TT","GTTPERFD","GTTUN0NS","GTTUN1NT","AGTTPERFD","FCDGTTPRFD","GTTADISC0","GTTADISC1","GTTADISC2","GTTADUP","GTTAFWD","GTTASET","GTTASRVGFLX","GTTASRVGPRT","GTTASRVSMSR","GTTASFLOG","GTTAMSVTO","GTTAMSVDI","GTTAMSVNA""I","0",0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0. . . . .
"K","255",0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
Assuming each data line will be:
4 char status + 4 char TT + 18 * (6 char data) + 2 = 118 chars
For a report of 256 TTs, example typical file size:
54E86977 Revision 1, July 2017
ReportsMeasurements
Table 9: Typical File Size: systot-tt.csv
File Size=Report data+Reportheader+System
header
30,688 bytes=30,208+230+250
CGTT SYSTOT Report
These measurements are used to monitor the overall performance of the STP.
The system total CGTT report requires the Origin Based SCCP Routing feature to be enabled or FLOBRfeature to be activated. The entity type for CGTT reports reuses TT.When a GTT Actions feature is onwith OBSR feature (which does translation based on the Calling Party), the GTT measurements thathave names beginning with CGGTT (such as CGGTADISC0) are updated.
Note: The CGTT registers in the SYSTOT-CGTT report are pegged only if the GTT Translation modeis either FLOBR_CGPA (FG) or CGPA. The GTT Translation mode is determined by the GTTMODEparameter in the rtrv-ls command. When the GTTMODE is System default (SysDflt), the mode isdetermined from the DFLTGTTMODE option of the SCCPOPTS table.
Example Commands:
UI: rept-meas:type=systot:enttype=tt
FTP: rept-ftp-meas:type=systot:enttype=tt
Table 10: Calling Party GTT Measurements
UnitDescriptionEvent Name
peg countCgPAGTTs Performed - Thetotal number of MSUs that
CGTTPERFD
successfully passed CgPA globaltitle translation (GTT)(CgPAGTA, CgPA PC, or OPC). Thisregister is pegged only when theCgPA TT is present in the MSU.Since GTT can be done on theCgPA PC or on the OPC, theCgPA GTA is not a pre-requisiteto perform GTT.
This register appears in theSYSTOT-CGTT report ONLY,which is only generated if theOrigin Based SCCP Routingfeature is enabled or FLOBRfeature is turned on.
peg countGTT Actions – MSUs Discarded- The total number of messages
CGGTTADISC0
55E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
discarded by the DISCARD GTTAction.
peg countGTT Actions – MSUs Discarded- The total number of messages
CGGTTADISC1
discarded by the UDTS GTTAction.
peg countGTT Actions – MSUs Discarded- The total number of messages
CGGTTADISC2
discarded by the TCAP ErrorGTT Action
peg countGTT Actions – MSUsDuplicated - The total number
CGGTTADUP
of messages for which DuplicateMSU was sent. Multipleduplicate actions in an action setshall also increment this registeronly once.
peg countGTT Actions – MSUsForwarded - The total number
CGGTTAFWD
of messages forwarded byForward GTT Action.
peg countGTT Actions - The total numberof messages receiving any GTTaction.
CGGTTASET
peg countCgPAGTTs Unable to Perform- Diagnostic 0: CgPA selectors
GTTUN0NS
not found - The total number oftimes that the specified type oftranslation in an MSU was notsupported by the STP. Thisregister counts MSUs for whichCgPA selectors were not found.This register appears in theSYSTOT-CGTT report ONLY,which is only generated if theOrigin Based SCCP Routingfeature is enabled or FLOBRfeature is turned on.
peg countOrigin Based GTTs Unable toPerform - Diagnostic 1: - The
CGGTTUN1NT
number of times that a match forthe global title or point code
56E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
could not be found in thetranslation table because:
Translation not found in CgPAGTA GTTSET or in CgPA PCGTTSET or in OPC GTTSET.
GTT on CgPA PC is required,but CgPA PC is not present inthe MSU.
This register is pegged when theCgPA TT is present in the MSU.Since GTT can be done on theCgPA PC or on the OPC, theCgPA GTA is not a pre-requisiteto perform GTT.
This register shall also bepegged, if FLOBR CgPA gttmodeis used, and translation is notsuccessful for any of thefollowing reasons:
• maximum search depth isreached
• duplicate GTTSET type isencountered
• translation not found (anyGTTSET type)
• CdPA SSN required, but notpresent in the MSU
• CgPA SSN required, but notpresent in the MSU
• CgPA PC required, but notpresent in the MSU
• Default CgPA PC Set isrequired, but not provisioned(ANSI or ITU)
This register appears in theSYSTOT-CGTT report ONLY,which is only generated if theOrigin Based SCCP Routingfeature is enabled or FLOBRfeature is turned on.
peg countFLOBR CGPA GTTs Performed- The total number of MSUs that
FCGGTTPRFD
successfully completed FlexibleCgPA Global Title Translation.This register appears in the
57E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
SYSTOT-CGTT report ONLY,which is only generated iftheOrigin Based SCCP Routingfeature is enabled or FLOBRfeature is turned on.
peg countThe total number of messagesserviced by GFLEX GTT Action.
CGGTTSRGFLX
peg countThe total number of messagesserviced by GPORT GTT Action.
CGGTTSRGPRT
peg countThe total number of messagesserviced by SMSMR GTT Action.
CGGTTSRSMSR
peg countThe total number of messagesserviced by SFLOG GTT Action.
CGGTTASFLOG
peg countThe total number of messagesthat successfully pass SCPVALGTT Action.
CGGTTAMSVTO
peg countThe total number of messagesdiscarded by SCPVAL GTTAction.
CGGTTAMSVDI
peg countThe total number of messageswhere validation was notapplied by SCPVAL GTT Action.
CGGTTAMSVNA
peg countTotal number of messages onwhich GTT is performed only onSCCP cards (per CGTT).
CGGTTONSM
peg countTotal number of messages onwhich GTT is performed only on
CGGTTONLIM
GTT enabled IPSG cards (perCGTT).
peg countTotal number of messages wheremore than one component was
CGTMULTCOMP
searched for an OPCODEtranslation, even if no matchingtranslation was found (perCGTT).
statusIndication of Data ValiditySTATUS
K – indicates good data
I – indicates incomplete interval;
N – indicates data not current.
58E86977 Revision 1, July 2017
ReportsMeasurements
UI Example Output:
tekelecstp 15-09-06 22:34:19 EST EAGLE5 46.3.0.0.0-66.11.0 TYPE OF REPORT: STP SYSTEM TOTAL MEASUREMENTS ON CGTT REPORT PERIOD: LAST REPORT INTERVAL: 15-09-06, 22:00:00 THROUGH 22:29:59
CGTT-SYSTOT MEASUREMENTS: CGTT: 1
These measurements are from 15-09-06, 22:00:00 through 22:29:59. CGGTTPERFD = 0, CGGTTUN0NS = 0, CGGTTUN1NT = 0, FCGGTTPRFD = 0, CGGTTADISC0= 0, CGGTTADISC1= 0, CGGTTADISC2= 0, CGGTTADUP = 0, CGGTTAFWD = 0, CGGTTASET = 0, CGGTTSRGFLX= 0, CGGTTSRGPRT= 0, CGGTTSRSMSR= 0, CGGTTASFLOG= 0, CGGTTAMSVTO= 0, CGGTTAMSVDI= 0, CGGTTAMSVNA= 0
;
FTP Example Output File Name:systot-cgtt_20020124_2230.csv
FTP Example Output File Format:
"CLLI","SWREL","RPTDATE","RPTIME","TZ","RPTTYPE","RPTPD","IVALDATE","IVALSTART","IVALEND","NUMENTIDS""tekelecstp","EAGLE5 46.3.0.0.0-66.11.0","2014-01-24","22:33:34","EST ","STP SYSTEM TOTAL MEASUREMENTS ON CGTT","LAST","2014-01-24","22:00:00","22:30:00",256
"STATUS","TT","CGGTTPERFD","CGGTTUN0NS","CGGTTUN1NT","FCGGTTPRFD","CGGTTADISC0","CGGTTADISC1","CGGTTADISC2","CGGTTADUP","CGGTTAFWD","CGGTTASET","CGGTTSRGFLX","CGGTTSRGPRT","CGGTTSRSMSR","CGGTTASFLOG","CGGTTAMSVTO","CGGTTAMSVDI","CGGTTAMSVNA""K","0",0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0. . . . .
"K","255",0,0,0,0,0,0,0,0,0,0,0,0,0
Assuming each data line will be:
4 char status + 4 char TT + 17 * (6 char data) + 2 = 112 chars
For a report of 256 TTs, example typical file size:
Table 11: Typical File Size: systot-cgtt.csv
File Size=Report data+Reportheader+System
header
29,166 bytes=28,672+244+250
STPLAN SYSTOT Report
Note:
The peg counts for STPLAN measurements have the possibility of rolling over during periods of highSTPLAN message transmit and receive. On the measurement reports, these measurements show upas negative numbers. This indicates that STPLAN transmit-and-receive measurements have valuesgreater than four gigabytes of data.
Example Commands:
59E86977 Revision 1, July 2017
ReportsMeasurements
UI: rept-meas:type=systot:enttype=stplan
FTP: rept-ftp-meas:type=systot:enttype=stplan
Table 12: STP System Total STPLAN Measurements
UnitDescriptionEvent Name
peg countEthernet Alignment Error -Number of packets not received
ENETALNERR
over the STPLAN interfacebecause of ethernet alignmenterrors.
peg countEthernet Bus Busy - Number oftransmissions attempted when
ENETBUSBSY
the STPLAN ethernet bus wasbusy.
peg countEthernet Collision Error -Number of packets not
ENETCOLERR
transmitted by STPLAN becauseof excessive collisions on theSTPLAN ethernet bus.
peg countEthernet CRC Error - Numberof packets not received on the
ENETCRCERR
STPLAN ethernet due to CRCerrors.
peg countEthernet Octets Received - Thetotal number of octets received
ENETOCTRCV
on the STPLAN ethernetinterface.
peg countEthernet Octets Transmitted -The total number of octets
ENETOCTXMT
transmitted on the STPLANethernet interface.
peg countEthernet Receive BufferOverflow Errors - Number of
ENETOVRERR
packets not received by STPLANbecause of a receive bufferoverflow.
peg countIP Address Error - The totalnumber of inbound IP
IPADDRERR
datagrams discarded on theSTPLAN interface due to a baddestination address.
60E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
peg countIP Header Errors - The totalnumber of inbound IP
IPHDRERR
datagrams discarded on theSTPLAN interface due to headererrors.
peg countIP Protocol Error - Number ofinbound IP datagrams discarded
IPPROTERR
by STPLAN due to an error inthe packet (invalid protocol).
peg countSTPLAN Discarded 1 - Numberof SLAN MSUs discarded by the
SLANDISC1
LIM cards for STPLAN featuredisabled and records aging offof the local queue.
peg countSTPLAN Discarded 2 -Numberof SLAN MSUs discarded by the
SLANDISC2
SLAN cards for networkproblems and unreachable farend servers. During networkoutages, the SLAN cards willstop TVG/MFC grants or go intoflow control. This causes thePDUs to be queued on the LIMcards, so the majority of discardswill be pegged on SLANDISC1under these circumstances.
msecsSTPLAN Disabled - Theduration that the STPLAN
SLANDSBLD
screening/copy feature wasdisabled.
peg countSTPLAN Screened - Number ofMSUs that were copied to the
SLANSCRND
STPLAN interface after passinggateway screening.
peg countSTPLAN Transmit - Number ofMSUs sent to the hostdestination.
SLANXMIT
statusIndication of Data ValiditySTATUS
K – indicates good data
I – indicates incomplete interval;
N – indicates data not current.
61E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
peg countTCP Connections Failed - Thetotal number of TCP connections
TCPCONNFLD
that have failed on the STPLANinterface.
peg countTCP Receive Error - The totalnumber of TCP segments
TCPRCVERR
received on the STPLANinterface in error.
peg countTCP Reset Sent - The totalnumber of TCP segments sent
TCPRSTSENT
containing the reset (RST) flagon the STPLAN interface.
peg countTCP Segment Received - Thetotal number of TCP segments
TCPSEGRCVD
received on the STPLANinterface.
peg countTCP Segment Sent - The totalnumber of TCP segments senton the STPLAN interface.
TCPSEGSENT
peg countTCP Segment Retransmitted -The total number of TCP
TCPSEGXMT2
segments retransmitted on theSTPLAN interface.
UI Example Output:
tekelecstp 01-08-23 11:00:11 EST EAGLE 34.0.0 TYPE OF REPORT: STP SYSTEM TOTAL MEASUREMENTS ON STPLAN REPORT PERIOD: LAST REPORT INTERVAL: 01-08-23 10:30:00 THRU 10:59:59 STPLAN-SYSTOT MEASUREMENTS Measurement data represents an incomplete interval. SLANDSBLD = 0, SLANDISC1 = 0, SLANDISC2 = 0, SLANSCRND = 0, SLANXMIT = 0, ENETALNERR = 0, ENETCRCERR = 0, ENETCOLERR = 0, ENETBUSBSY = 0, ENETOVRERR = 0, ENETOCTXMT = 0, ENETOCTRCV = 0, TCPCONNFLD = 0, TCPSEGRCVD = 0, TCPSEGSENT = 0, TCPSEGXMT2 = 0, TCPRCVERR = 0, TCPRSTSENT = 0, IPHDRERR = 0, IPADDRERR = 0, IPPROTERR = 0; tekelecstp 01-08-23 11:00:12 EST EAGLE 34.0.0 END OF HALF-HOURLY STPLAN-SYSTOT MEASUREMENT REPORT;
FTP Example Output File Name:systot-stplan_19990117_1530.csv
62E86977 Revision 1, July 2017
ReportsMeasurements
FTP Example Output File Format:
"CLLI","SWREL","RPTDATE","RPTIME","TZ","RPTTYPE","RPTPD","IVALDATE","IVALSTART","IVALEND","NUMENTIDS"<cr><lf>"tekelecstp","34.0.0-39.1.0","1999-01-17","15:51:37","EST","STP SYSTEM TOTAL MEASUREMENTS ON STPLAN","LAST","1999-01-17","15:00:00","15:30:00",1<cr><lf><cr><lf>"STATUS","SLANDSBLD","SLANDISC1","SLANDISC2","SLANSCRND","SLANXMIT","ENETALNERR","ENETCRCERR","ENETCOLERR","ENETBUSBSY","ENETOVRERR","ENETOCTXMT","ENETOCTRCV","TCPCONNFLD","TCPSEGRCVD","TCPSEGSENT","TCPSEGXMT2","TCPRCVERR","TCPRSTSENT","IPHDRERR","IPADDRERR","IPPROTERR"<cr><lf>"K",0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0<cr><lf>
Example typical file size:
Table 13: Typical File Size: systot-stplan.csv
File Size=Report data+Reportheader+System
header
657 bytes=132+275+250
IDPR SYSTOT Report
Example Commands:
UI: rept-meas:type=systot:enttype=idpr
FTP: rept-ftp-meas:type=systot:enttype=idpr
Note: The IDPR Measurement Report table for the SYSTOT IDPR report is available as follows.
Table 14: Availability of SYSTOT IDPR Report
Reports supportedon GPLs
DisplayRetentionPeriodReporting modes
OAMHC (withoutIntegratedMeasurements)
UI24 hours30 minutesOn-demand
MCP/OAMHC(with IntegratedMeasurements)
UI24 hours15 or 30 minutesOn-demand
MCP/OAMHCFTP24 hours15 or 30 minutesScheduled/Ondemand
The IDPR Measurement Report is created for IDPR measurements through the entity "idpr."
63E86977 Revision 1, July 2017
ReportsMeasurements
Table 15: SYSTOT IDPR Measurements
UnitDescriptionEvent Name
peg countTotal number of IDP/IDPSMSmessages that were selected for
IDPAPTYGTT
A-Party Routing service, but fellthrough to GTT (with or withouthaving attempted SK routingfirst).
peg countTotal number of IDP/IDPSMSmessages that were selected for
IDPAPTYRTD
A-Party Routing service, andwere successfully routed basedon A-Party PPSOPTS routingdata (i.e. routing data associatedwith the RTDB PT assigned tothe A-Party digits).
peg countTotal number of IDP/IDPSMSmessages that were selected for
IDPAPTYSKR
A-Party Routing service, but fellthrough to Service Key Routing,and were successfully routedbased on SK/BCSM PPSOPTSdata (i.e. routing data associatedwith the RTDB PT assigned tothe SK/BCSM entry).
peg countTotal number of IDP/IDPSMSmessages received that matched
IDPBKLCONN
the blacklist criteria and aCONNECT response wasgenerated.
peg countTotal number of IDP/IDPSMSmessages received that did not
IDPBKLCONT
match the blacklist criteria anda CONTINUE response wasgenerated.
peg countThe total number of MSUsselected for IDPR service which
IDPRMSERR
could not be processed due toerrors in encoding, decoding,formatting, or IDP A-Partyrouting, or IDP SK Routing. Thisregister also includes countwhen IDPRCDPN or IDPRCGPNservice is turned off.
64E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
peg countTotal number of MSUs selectedfor IDPR service which fell
IDPRMSFAIL
through to GTT due to (1) nomatch on MSISDN in MNPDB,or (2) match on MSISDN but noassociation to RN or SP forCDPNNP or CGPNNP, (3) nomatch for IDP A-Party Blacklistquery-response criteria or, (4)IDP Blacklist relay resulted infalling through to GTT forrouting, or (5) IDP A-Party or SKRouting resulted in fallingthrough to GTT routing (due tono-match on MSISDN orinsufficient data).
peg countTotal number of MSUs receivedand selected for IDPR service.
IDPRMSRCV
This register includes counts for(1) MSUs that resulted in bothsuccessful and unsuccessfulMNPDB lookups, (2) MSUswhich failed IDPRPreprocessing, (3) when no NPPrule is found for IDPRCDPN &IDPRCGPN service, (4) whenIDPRCDPN or IDPRCGPNservice is turned off.
IDPRMSRCV = IDPRMSERR +IDPRMSFAIL + IMPRMSSUCC+ Fall-Through case
Note: "Fall-Through case" - AllMSUs that have failed IDPRpre-processing or not havingmatching NPP rule forIDPRCDPN & IDPRCGPNwhich fall through to GTT.
peg countNumber of MSUs selected forIDPR service for which the
IDPRMSSUCC
requested IDPR feature setfunctionalities were executedsuccessfully. This includes pegsto IDPAPTYRTD, IDPSKRTD,IDPBKLCONN, andIDPBKLCONT registers.
65E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
peg countTotal number of IDPs that wereselected for Service Key Routing
IDPSKGTT
(without having first gone toA-Party Routing), but fellthrough to GTT.
peg countTotal number of IDP/IDPSMSmessages that were selected for
IDPSKRTD
Service Key Routing (withouthaving first gone to A-PartyRouting), and were successfullyrouted based on SK/BCSMPPSOPTS data.
peg countTotal number of IDP Messagesfor which INPRTG Service action
IDPINPCONN
sent a CONNECT message fromIDPRCDPN service.
peg countTotal number of IDP Messagesfor which INPRTG Service action
IDPINPCONN2
sent a CONNECT message fromIDPRCDPN2 service.
peg countTotal number of IDP Messagesfor which INPRTG Service action
IDPINPCONN3
sent a CONNECT message fromIDPRCDPN3 service.
peg countTotal number of IDP Messagesfor which INPRTG Service action
IDPINPCONN4
sent a CONNECT message fromIDPRCDPN4 service.
peg countTotal number of IDP Messagesfor which INPRTG Service action
IDPINPCONT
sent a CONTINUE message fromIDPRCDPN service.
peg countTotal number of IDP Messagesfor which INPRTG Service action
IDPINPCONT2
sent a CONTINUE message fromIDPRCDPN2 service.
peg countTotal number of IDP Messagesfor which INPRTG Service action
IDPINPCONT3
sent a CONTINUE message fromIDPRCDPN3 service.
peg countTotal number of IDP Messagesfor which INPRTG Service action
IDPINPCONT4
66E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
sent a CONTINUE message fromIDPRCDPN4 service.
peg countTotal number of IDP Messagesfor which INPRTG Service action
IDPINPRLC
sent a RELEASECALL messagefrom IDPRCDPN service.
peg countTotal number of IDP Messagesfor which INPRTG Service action
IDPINPRLC2
sent a RELEASECALL messagefrom IDPRCDPN2 service.
peg countTotal number of IDP Messagesfor which INPRTG Service action
IDPINPRLC3
sent a RELEASECALL messagefrom IDPRCDPN3 service.
peg countTotal number of IDP Messagesfor which INPRTG Service action
IDPINPRLC4
sent a RELEASECALL messagefrom IDPRCDPN4 service.
peg countTotal number of IDP Messagesprocessed by INPRTG Serviceaction from IDPRCDPN service.
IDPINPRTG
peg countTotal number of IDP Messagesprocessed by INPRTG Serviceaction from IDPRCDPN2 service.
IDPINPRTG2
peg countTotal number of IDP Messagesprocessed by INPRTG Serviceaction from IDPRCDPN3 service.
IDPINPRTG3
peg countTotal number of IDP Messagesprocessed by INPRTG Serviceaction from IDPRCDPN4 service.
IDPINPRTG4
peg countTotal number of IDP Messagesprocessed by SKGTARTG
IDPSKGTART
Service action from IDPRCDPNservice.
peg countTotal number of IDP Messagesprocessed by SKGTARTG
IDPSKGTART2
Service action from IDPRCDPN2service.
peg countTotal number of IDP Messagesprocessed by SKGTARTG
IDPSKGTART3
67E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
Service action from IDPRCDPN3service.
peg countTotal number of IDP Messagesprocessed by SKGTARTG
IDPSKGTART4
Service action from IDPRCDPN4service.
peg countTotal number of IDP Messagesprocessed per IDPRCDPNservice.
IDPRCDPN
peg countTotal number of IDP Messagesprocessed per IDPRCDPN2service.
IDPRCDPN2
peg countTotal number of IDP Messagesprocessed per IDPRCDPN3service.
IDPRCDPN3
peg countTotal number of IDP Messagesprocessed per IDPRCDPN4service.
IDPRCDPN4
UI Example Output:
> rept-meas:enttype=idpr:type=systot
Command Accepted - Processing
meas 02-06-30 13:01:20 EST EAGLE5 43.0.0-63.46.0 rept-meas:enttype=idpr:type=systot Command entered at terminal #1.; meas 02-06-30 13:01:20 EST EAGLE5 43.0.0-63.46.0 Measurements Report will be generated.;
meas 02-06-30 13:01:20 EST EAGLE5 43.0.0-63.46.0 TYPE OF REPORT: STP SYSTEM TOTAL MEASUREMENTS ON IDPR REPORT PERIOD: LAST REPORT INTERVAL: 02-06-30, 12:30:00 THROUGH 12:59:59
IDPR-SYSTOT MEASUREMENTS
These measurements are from 02-06-30, 12:30:00 through 12:59:59. Measurement data represents an incomplete interval. IDPRMSRCV = 0, IDPRMSSUCC = 0, IDPRMSFAIL = 0, IDPRMSERR = 0, IDPAPTYRTD = 0, IDPAPTYSKR = 0, IDPAPTYGTT = 0, IDPSKRTD = 0, IDPSKGTT = 0, IDPBKLCONN = 0, IDPBKLCONT = 0, IDPINPCONN = 0, IDPINPCONN2= 0, IDPINPCONN3= 0, IDPINPCONN4= 0, IDPINPCONT = 0, IDPINPCONT2= 0, IDPINPCONT3= 0, IDPINPCONT4= 0, IDPINPRLC = 0, IDPINPRLC2 = 0, IDPINPRLC3 = 0, IDPINPRLC4 = 0, IDPINPRTG = 0, IDPINPRTG2 = 0, IDPINPRTG3 = 0, IDPINPRTG4 = 0,
68E86977 Revision 1, July 2017
ReportsMeasurements
IDPSKGTART = 0, IDPSKGTART2= 0, IDPSKGTART3= 0, IDPSKGTART4= 0, IDPRCDPN = 0, IDPRCDPN2 = 0, IDPRCDPN3 = 0, IDPRCDPN4 = 0
;
meas 02-06-30 13:01:23 EST EAGLE5 43.0.0-63.46.0 END OF ON-DEMAND IDPR-SYSTOT MEASUREMENT REPORT;
FTP Example Output File Name:systot-idpr_20820706_0445.csv
FTP Example Output File Format:
"CLLI","SWREL","RPTDATE","RPTIME","TZ","RPTTYPE","RPTPD","IVALDATE","IVALSTART","IVALEND","NUMENTIDS""meas","EAGLE5 43.0.0-63.46.0","2082-07-06","04:45:01","EST ","STP SYSTEM TOTAL MEASUREMENTS ON IDPR","LAST","2082-07-06","04:30:00","04:45:00", 1
"STATUS","IDPRMSRCV","IDPRMSSUCC","IDPRMSFAIL","IDPRMSERR","IDPAPTYRTD","IDPAPTYSKR","IDPAPTYGTT","IDPSKRTD","IDPSKGTT","IDPBKLCONN","IDPBKLCONT","IDPINPCONN","IDPINPCONN2","IDPINPCONN3","IDPINPCONN4","IDPINPCONT","IDPINPCONT2","IDPINPCONT3","IDPINPCONT4","IDPINPRLC","IDPINPRLC2","IDPINPRLC3","IDPINPRLC4","IDPINPRTG","IDPINPRTG2","IDPINPRTG3","IDPINPRTG4","IDPSKGTART","IDPSKGTART2","IDPSKGTART3","IDPSKGTART4","IDPRCDPN","IDPRCDPN2","IDPRCDPN3","IDPRCDPN4""I",32,34,36,38,52,54,56,58,60,62,64,76,78,80,82,84,86,88,90,92,94,96,98,100,102,104,106,108,110,112,114,116,118,120,122
Assuming the data line will be:
4 char status + 35*(avg. 6 chars per field) + 2 = 216 chars
Typical file size:
Table 16: Typical File Size: systot-idpr.csv
File Size=Report Data+ReportHeader+
SystemHeader
923=214+459+250
SIP SYSTOT Report
Example Commands:
UI: rept-meas:type=systot:enttype=sip
FTP:rept-ftp-meas:type=systot:enttype=sip
Table 17: STP System Total SIP Measurements
UnitDescriptionEvent Name
peg countThe total number of SIP invitereceived (Including re-transmits)
INVITERCVD
peg countNumber of cancel receivedCANCRCVD
69E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
peg countNumber of 1xx responses sentPROVRSPSENT
peg countNumber of 2xx responses sentOKRSPSENT
peg countNumber of 302 responses sentRDRCTSENT
peg countNumber of 4xx responses sentCLNFAILSENT
peg countNumber of 5xx responses sentSRVERRSENT
peg countNumber of SIP invite messagesfor which rxdb lookup was
NPSUCC
successfully performed andRN/ASD was found
peg countNumber of SIP invite messagesfor which rxdb lookup was notperformed
NPBYPASSSUC
peg countNumber of SIP invite messagesfor which rxdb lookup returnedRN not found
INVALIDDN
peg countNumber of SIP invite messagesfor which rxdb lookup returnedRN not found
NPRNNF
UI Example Output:
tekelecstp 02-01-03 19:06:13 MST EAGLE5 45.0.0-64.49.0 TYPE OF REPORT: STP SYSTEM TOTAL MEASUREMENTS ON SIP REPORT PERIOD: LAST REPORT INTERVAL: 02-01-03, 18:00:00 through 18:29:59
SIP-SYSTOT MEASUREMENTS
These measurements are from 02-01-03, 18:00:00 through 18:29:59 INVITERCVD = 0, CANCRCVD = 0, PROVRSPSENT= 0, OKRSPSENT = 0, RDRCTSENT = 0, CLNFAILSENT= 0, SRVERRSENT = 0, NPSUCC = 0, NPBYPASSSUC= 0, INVALIDDN = 0, NPRNNF = 0
FTP Example Output File Name:systot-sip_20020212_2200.csv
FTP Example Output File Format:
"CLLI","SWREL","RPTDATE","RPTIME","TZ","RPTTYPE","RPTPD","IVALDATE","IVALSTART","IVALEND","NUMENTIDS"
"tekelecstp","EAGLE5 45.0.0-64.49.0","2013-01-09","21:30:00","MST ","STP SYSTEM TOTAL MEASUREMENTS ON SIP","LAST","2011-01-23","00:30:00","01:00:00",1
"STATUS","INVITERCVD","CANCRCVD","PROVRSPSENT","OKRSPSENT","RDRCTSENT","CLNFAILSENT","SRVERRSENT","NPSUCC","NPBYPASSSUC","INVALIDDN","NPRNNF""K",0,0,0,0,0,0,0,0,0,0,0
70E86977 Revision 1, July 2017
ReportsMeasurements
Assuming the data line will be:
4 char status + 11*(avg. 6 chars per field) + 2 = 72 chars
Typical file size:
Table 18: Typical File Size: systot-sip.csv
File Size=Report Data+ReportHeader+
SystemHeader
467 bytes=72+145+250
SFTHROT SYSTOT Report
Example Commands:
FTP:rept-ftp-meas:type=systot:enttype=sfthrot
Table 19: STP System Total SFTHROT Measurements
UnitDescriptionEvent Name
peg countThe total number of messagesserviced by a particularThrottling GTT Action.
GTTATHTO
peg countThe total number of messagesdiscarded because the Throttling
GTTATHDI
GTT Action was in BLOCKEDstate.
FTP Example Output File Name: systot-sfthrot_20150813_1530.csv
FTP Example Output File Format:
"CLLI","SWREL","RPTDATE","RPTIME","TZ","RPTTYPE","RPTPD","IVALDATE","IVALSTART","IVALEND","NUMENTIDS"<cr><lf>"tekelecstp","EAGLE5 46.3.0.0.0-66.8.0","8/13/2015","15:30:01","EST ","STP SYSTEM TOTAL MEASUREMENTS ON SFTHROT","LAST","8/13/2015","15:00:00","15:30:00",32<cr><lf>
"STATUS","THROTTLING ACTION","GTTATHTO","GTTATHDI"<cr><lf>"K","sf1",0,0<cr><lf>. . . . .
"K","sf32",0,0<cr><lf>
Assuming the data line will be:
4 char status + 12 char TA +2 * (6 char data) + 2 = 30 chars
Typical file size:
71E86977 Revision 1, July 2017
ReportsMeasurements
Table 20: Typical File Size: systot-sfthrot.csv
File Size=Report Data+ReportHeader+
SystemHeader
1262 bytes=960 bytes+52+250
Component Measurements (COMP)
Component Measurements provides performance data related to links and linksets.
Entity Types: LINK, LNKSET , SCTPASOC, SCTPCARD, UA
Accumulation Interval: 30 minutes
Optional Accumulation Interval: Every 15 minutes
STP Retention Period: 24 hours
Reporting Modes: Scheduled, On-Demand
Accessible Collection Periods: Last, Specific, Active
LINK COMP Report
Certain registers are reported for MTP2, SAAL, IPVL, and IPVHSL classes. These registers aresummarized in Table 21: Registers Reported per LINK CLASS for Component Links.
Note: The LINK COMP Report takes about 3-4 minutes to be generated correctly after a link is deleted.
Table 21: Registers Reported per LINK CLASS for Component Links
IPVHSL ClassIPVL/IPVLGWClassSAAL ClassMTP2 ClassEvent Name
XXXXDURLKOTG
XXXXECCNGLV1
XXXXECCNGLV2
XXXXECCNGLV3
XECLNKCB
XECLNKXCO
XINCCELLS
XXLMSUOCTRCV
XXLMSUOCTTRN
72E86977 Revision 1, July 2017
ReportsMeasurements
IPVHSL ClassIPVL/IPVLGWClassSAAL ClassMTP2 ClassEvent Name
XXLMSURCV
XXLMSURCVDSC
XXLMSUTRN
XXLMSUTRNDSC
XXXXLNKAVAIL
XM2PLKNIS
XM2PUDMRC
XM2PUDMTR
XM2PUDOCR
XM2PUDOCT
XXXXMSGDISC0
XXXXMSGDISC1
XXXXMSGDISC2
XXXXMSGDISC3
XXXXMSGSRCVD
XMSURETRN
XXXXMSGSRGTT
XXXXMSGSTRAN
XXXXMTCEUSG
XXXXMOCTRGTT
XXXXMOCTRCVD
XXXXMOCTTRAN
XXXXNMGWSDSABL
XOCTRETRN
XOUTCELLS
XSDPDURCV
XSDPDURTR
73E86977 Revision 1, July 2017
ReportsMeasurements
IPVHSL ClassIPVL/IPVLGWClassSAAL ClassMTP2 ClassEvent Name
XSDPDUTRN
XXXXTDCNGLV1
XXXXTDCNGLV2
XXXXTDCNGLV3
Command Examples
• UI:
rept-meas:type=comp:enttype=link:loc=xxxx:link=x
rept-meas:type=comp:enttype=link:lsn=ls3
• FTP:
rept-ftp-meas:type=comp:enttype=link
Measurement Events
Table 22: Component Link Measurements
UnitDescriptionEvent Name
secondsDuration ofLink Unavailable(Outage) - The total time a link
DURLKOTG
was unavailable to MTP level 3for any reason.
peg countEvent Count for Entering Level1 Link Congestion -
ECCNGLV1
The total number of times thatlink congestion level 1 wasentered.
peg countEvent Count for Entering Level2 Link Congestion -
ECCNGLV2
The total number of times thatlink congestion level 2 wasentered.
peg countEvent Count for Entering Level3 Link Congestion -
ECCNGLV3
The total number of times thatlink congestion level 3 wasentered.
74E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
peg countNumber of times the linkperformed ChangeBack
ECLNKCB
procedures, includingtime-controlled ChangeBacks.
peg countNumber of times the linkperformed Extended
ECLNKXCO
ChangeOver procedure,including time-controlledChangeOvers.
peg countTotal number of messages thatare sent from a GTT enabledIPSG card to an SCCP card.
GTTFORSM
peg countTotal number of messages onwhich GTT is performed on aGTT enabled IPSG card.
GTTONLIM
octetsTotal incoming NDC-valid ATMcells on the HSL’s VCL,
INCCELLS
including UI and OAM cells butexcluding idle/unassigned cells.
octetsThe number of octets receivedin large MSUs. This register is
LMSUOCTRCV
pegged in addition toMOCTRCVD when the LargeMSU Support for IP Signalingfeature status is on and a largeMSU is successfully received.
octetsThe number of octetstransmitted in large MSUs. This
LMSUOCTTRN
register is pegged in addition toMOCTTRAN when the LargeMSU Support for IP Signalingfeature status is on and a largeMSU is successfully transmitted.
peg countThe number of large MSUsreceived. This register is pegged
LMSURCV
in addition to MSURECVD whenthe Large MSU Support for IPSignaling feature status is on anda large MSU is successfullyreceived.
peg countThe number of large MSUsdiscarded in the receive path.
LMSURCVDSC
This can occur when the Large
75E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
MSU Support for IP Signalingfeature is not on or when theMSU is larger than 4095 bytes orwhen a routing failure occurs.
peg countThe number of large MSUstransmitted. This register is
LMSUTRN
pegged in addition toMSGSTRAN when the LargeMSU Support for IP Signalingfeature status is on and a largeMSU is successfully transmitted.
peg countThe number of large MSUsdiscarded in the transmit path..
LMSUTRNDSC
secondsLink Available Time - The totaltime the link was available toMTP level 3.
LNKAVAIL
msecM2PA Link Not-in-ServiceDurationThe duration the link
M2PLKNIS
was not in the in-service (INS)state at the M2PA layer (inseconds), i.e., during which thelink was in any of the otherdefined M2PA states (such asIDLE, OOS, AIP, PROVING,ALIGNED READY, orRETRIEVAL).
peg countThe number of M2PA UDMsreceived.
M2PUDMRC
peg countThe number of M2PA User DataMessages (UDMs) transmitted.
M2PUDMTR
octetsThe number of M2PA UDMoctets received.
M2PUDOCR
octetsThe number of M2PA User DataMessage (UDM) octetstransmitted.
M2PUDOCT
octetsMessage Octets Received -MOCTRCVD
Total number of octets associatedwith Messages received,including those removed forMTP level 2 processing and
76E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
those for which retransmissionhas been requested.
• For SAAL, IPVL, IPVHSL,and IPVLGW class linksets -applies to MTP level 3message bytes.
octetsMessage Octets Received forMessages Requiring GTT -
MOCTRGTT
Total number of octets receivedassociated with incomingMessages requiring global titletranslation (GTT), includingoctets removed in MTP level 2processing, e.g., CRC and flag.
• For SAAL class linksets,applies to MTP level 3message bytes.
octetsMessage Octets Transmitted -Total number of octets associated
MOCTTRAN
with Messages transmitted to thefar end. For all linkset classes,this includes octets for MTP level3 SIO and SIF.
• For MTP2 class linksets,octets included are thoseassociated with Messagestransmitted ANDacknowledged by level 2, aswell as any retransmittedMessages. Additional octetsincluded are MTP level 2 flag,BSN/BIB, FSN/BIB, LI, andCRC octets.
• For SAAL and IPVHSL classlinksets, octets are notincluded until the Message isacknowledged by level 2.
• For IPVL and IPVLGW classlinks, octets are not includeduntil the Message istransmitted by level 2. ForIPVLGW class linksets, SNMs(Messages with SI=0) areNOT included.
77E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
peg countFor ANSI links: Priority 0 MSUsDiscarded Due to Congestion -
MSGDISC0
The total number of priority 0MSUs discarded due tocongestion (any level).
• For SAAL class links, appliesto MTP level 3 messages .
• For ITU links, the totalnumber of MSUs discardeddue to congestion.
Note: The EAGLE only supportsthis one ITU discard counter.When the discard threshold isreached, all MSUs are discardedand counted in this register.Prior to the discard thresholdbeing reached, no MSUs arediscarded.
Note: The MSUs or Messagesmay be discarded on thetransmit/outbound link, whichindicates congestion via theECCNGLVLx or TDCNGLVxregisters or it may appear oninbound links routing traffic tothose congested links. The latterwill not indicate eitherECCNGLVLx or TDCNGLVx.
peg countFor ANSI links: Priority 1 MSUsDiscarded Due to Congestion -
MSGDISC1
The total number of priority 1MSUs discarded due tocongestion (any level).
• For SAAL class links, appliesto MTP level 3 messages .
For ITU links: this register is notapplicable.
Note: The MSUs or Messagesmay be discarded on thetransmit/outbound link, whichindicates congestion via theECCNGLVLx or TDCNGLVxregisters or it may appear oninbound links routing traffic tothose congested links. The latter
78E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
will not indicate eitherECCNGLVLx or TDCNGLVx.
peg countFor ANSI links: Priority 2 MSUsDiscarded Due to Congestion -
MSGDISC2
The total number of priority 2MSUs discarded due tocongestion (any level).
• For SAAL class links, appliesto MTP level 3 messages .
For ITU links: this register is notapplicable.
Note: The MSUs or Messagesmay be discarded on thetransmit/outbound link, whichindicates congestion via theECCNGLVLx or TDCNGLVxregisters or it may appear oninbound links routing traffic tothose congested links. The latterwill not indicate eitherECCNGLVLx or TDCNGLVx.
peg countFor ANSI links: Priority 3 MSUsDiscarded Due to Congestion -
MSGDISC3
The total number of priority 3MSUs discarded due tocongestion (any level).
• For SAAL class links, appliesto MTP level 3 messages .
For ITU links: this register is notapplicable.
Note: The MSUs or Messagesmay be discarded on thetransmit/outbound link, whichindicates congestion via theECCNGLVLx or TDCNGLVxregisters or it may appear oninbound links routing traffic tothose congested links. The latterwill not indicate eitherECCNGLVLx or TDCNGLVx.
peg countMSUs Received -MSGSRCVD
Total number of MSUs received,including those for which
79E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
retransmission has beenrequested.
• For SAAL, IPVL, IPVHSL,and IPVLGW class links,applies to MTP level 3messages.
peg countMSUs Received Requiring GTT-
MSGSRGTT
Total number of incoming MSUsrequiring global title translation(GTT).
• For SAAL class links, appliesto MTP level 3 messages.
peg countMSUs Transmitted -MSGSTRAN
Total number of MSUstransmitted to the far-end,including retransmissions.
• For MTP2 class links, MSUstransmitted ANDacknowledged by level 2.
• For SAAL, IPVL, IPVHSL,and IPVLGW class linksets,MTP level 3 messages offeredfor transmission after anyrequired conversion fromtheir respective M2PA,M3UA, or SUA formats.
peg countMSUs Retransmitted - Numberof MSUs retransmitted from theSTP on this link.
MSURETRN
• For MTP2 class links, MSUsretransmitted by level 2.
secondsLink Maintenance Usage - Thetotal time the link was manually
MTCEUSG
made unavailable to MTP level3.
This includes locally blocked(LPO), locally inhibited, orde-activated.
Note: MTCEUSG may be lessthan DURLKOTG due to link
80E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
recovery time following canc-slk,act-slk command sequence
peg countNumber of Times GWSDisabled - The number of times
NMGWSDSABL
that the GWS subsystem on theLIM card supporting the linkwas disabled because of a receiveoverload condition on the card.When this occurs, the GWSsubsystem is disabled for alllinks on the card and this registeris pegged for all links on the cardregardless of whether GWS isenabled for that link. Gatewayscreening is disabled on the cardto allow recovery from thereceive overload condition andis re-enabled when the receiveoverload condition abates.
octetsMSU Octets Retransmitted -The total number of MSU octets
OCTRETRN
retransmitted. This register isNOT reported for HSLs.
peg countTotal outgoing NDC-valid ATMcells on the HSL’s VCL,
OUTCELLS
including UI and OAM cells butexcluding idle/unassigned cells.
peg countSSCOPSDPDUs Received - Thenumber of SSCOP sequenced
SDPDURCV
data (SD) PDUs that werereceived during the indicatedinterval.
peg countSSCOP SDPDUs Retransmitted- The number of SSCOP SD
SDPDURTR
PDUs that were retransmitted,based on an accumulated countof such retransmissionsconveyed to layer management.
peg countSSCOP SD PDUs Transmitted- The number of SSCOP SD
SDPDUTRN
PDUs that were transmitted,including retransmissions.
81E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
statusIndication of Data Validity:STATUS
K indicates good dataI indicates incompleteintervalN indicates data not current
secondsTotal Duration of Level 1 LinkCongestion -
TDCNGLV1
The total time the link was inlevel 1 congestion.
secondsTotal Duration of Level 2 LinkCongestion -
TDCNGLV2
The total time the link was inlevel 2 congestion.
secondsTotal Duration of Level 3 LinkCongestion -
TDCNGLV3
The total time the link was inlevel 3 congestion.
UI Output Examples
• rept-meas:type=comp:enttype=link:loc=xxxx:link=x
tekelecstp 12-03-20 09:24:26 EST EAGLE5 44.0.0 TYPE OF REPORT: COMPONENT MEASUREMENTS ON LINK REPORT PERIOD: LAST REPORT INTERVAL: 12-03-20, 08:30:00 THROUGH 08:59:59
LINK-COMP MEASUREMENTS: LOC: 1103, LINK: A , LSN: ipsg (IPVL)
These measurements are from 12-03-20, 08:30:00 through 08:59:59. MSGSTRAN = 0, MSGSRCVD = 0, MOCTTRAN = 0, MOCTRCVD = 0, MTCEUSG = 0, DURLKOTG = 1800, MSGSRGTT = 0, MOCTRGTT = 0, TDCNGLV1 = 0, TDCNGLV2 = 0, TDCNGLV3 = 0, ECCNGLV1 = 0, ECCNGLV2 = 0, ECCNGLV3 = 0, MSGDISC0 = 0, MSGDISC1 = 0, MSGDISC2 = 0, MSGDISC3 = 0, LNKAVAIL = 0, NMGWSDSABL = 0, LMSUTRN = 0, LMSURCV = 0, LMSUOCTTRN = 0, LMSUOCTRCV = 0, LMSUTRNDSC = 0, LMSURCVDSC = 0
;
tekelecstp 12-03-20 09:27:46 EST EAGLE5 44.0.0 TYPE OF REPORT: COMPONENT MEASUREMENTS ON LINK REPORT PERIOD: LAST REPORT INTERVAL: 12-03-20, 08:30:00 THROUGH 08:59:59
LINK-COMP MEASUREMENTS: LOC: 1104, LINK: A , LSN: mtp2 (MTP2)
82E86977 Revision 1, July 2017
ReportsMeasurements
These measurements are from 12-03-20, 08:30:00 through 08:59:59. MSGSTRAN = 0, MSGSRCVD = 0, MSURETRN = 0, OCTRETRN = 0, MOCTTRAN = 0, MOCTRCVD = 0, MTCEUSG = 0, DURLKOTG = 1800, MSGSRGTT = 0, MOCTRGTT = 0, TDCNGLV1 = 0, TDCNGLV2 = 0, TDCNGLV3 = 0, ECCNGLV1 = 0, ECCNGLV2 = 0, ECCNGLV3 = 0, MSGDISC0 = 0, MSGDISC1 = 0, MSGDISC2 = 0, MSGDISC3 = 0, LNKAVAIL = 0, NMGWSDSABL = 0
;
tekelecstp 12-03-20 09:29:08 EST EAGLE5 44.0.0 TYPE OF REPORT: COMPONENT MEASUREMENTS ON LINK REPORT PERIOD: LAST REPORT INTERVAL: 12-03-20, 08:30:00 THROUGH 08:59:59
LINK-COMP MEASUREMENTS: LOC: 1105, LINK: A , LSN: ssedcm1 (IPVHSL)
These measurements are from 12-03-20, 08:30:00 through 08:59:59. MSGSTRAN = 0, MSGSRCVD = 0, MOCTTRAN = 0, MOCTRCVD = 0, MTCEUSG = 0, DURLKOTG = 1800, MSGSRGTT = 0, MOCTRGTT = 0, TDCNGLV1 = 0, TDCNGLV2 = 0, TDCNGLV3 = 0, ECCNGLV1 = 0, ECCNGLV2 = 0, ECCNGLV3 = 0, MSGDISC0 = 0, MSGDISC1 = 0, MSGDISC2 = 0, MSGDISC3 = 0, LNKAVAIL = 0, NMGWSDSABL = 0, LMSUTRN = 0, LMSURCV = 0, LMSUOCTTRN = 0, LMSUOCTRCV = 0, LMSUTRNDSC = 0, LMSURCVDSC = 0, M2PUDMTR = 0, M2PUDOCT = 0, M2PUDMRC = 0, M2PUDOCR = 0, M2PLKNIS = 1800, ECLNKCB = 0, ECLNKXCO = 0
;
tekelecstp 12-03-20 09:31:19 EST EAGLE5 44.0.0 TYPE OF REPORT: COMPONENT MEASUREMENTS ON LINK REPORT PERIOD: LAST REPORT INTERVAL: 12-03-20, 09:00:00 THROUGH 09:29:59
LINK-COMP MEASUREMENTS: LOC: 1112, LINK: A , LSN: saal (SAAL)
These measurements are from 12-03-20, 09:00:00 through 09:29:59. MSGSTRAN = 0, MSGSRCVD = 0, MOCTTRAN = 0, MOCTRCVD = 0, MTCEUSG = 0, DURLKOTG = 1800, MSGSRGTT = 0, MOCTRGTT = 0, TDCNGLV1 = 0, TDCNGLV2 = 0, TDCNGLV3 = 0, ECCNGLV1 = 0, ECCNGLV2 = 0, ECCNGLV3 = 0, MSGDISC0 = 0, MSGDISC1 = 0, MSGDISC2 = 0, MSGDISC3 = 0, LNKAVAIL = 0, NMGWSDSABL = 0, OUTCELLS = 1565, INCCELLS = 0, SDPDUTRN = 0, SDPDURCV = 0, SDPDURTR = 0
;
tekelecstp 12-03-20 09:32:50 EST EAGLE5 44.0.0 TYPE OF REPORT: COMPONENT MEASUREMENTS ON LINK REPORT PERIOD: LAST REPORT INTERVAL: 12-03-20, 09:00:00 THROUGH 09:29:59
LINK-COMP MEASUREMENTS: LOC: 1203, LINK: A , LSN: hcmimt1 (MTP2-UNCH)
83E86977 Revision 1, July 2017
ReportsMeasurements
These measurements are from 12-03-20, 09:00:00 through 09:29:59. MSGSTRAN = 0, MSGSRCVD = 0, MSURETRN = 0, OCTRETRN = 0, MOCTTRAN = 0, MOCTRCVD = 0, MTCEUSG = 1800, DURLKOTG = 1800, MSGSRGTT = 0, MOCTRGTT = 0, TDCNGLV1 = 0, TDCNGLV2 = 0, TDCNGLV3 = 0, ECCNGLV1 = 0, ECCNGLV2 = 0, ECCNGLV3 = 0, MSGDISC0 = 0, MSGDISC1 = 0, MSGDISC2 = 0, MSGDISC3 = 0, LNKAVAIL = 0, NMGWSDSABL = 0
;
• rept-meas:type=comp:enttype=link:lsn=ls3:period=active
tekelecstp 12-02-10 05:38:34 EST EAGLE5 44.0.0 TYPE OF REPORT: COMPONENT MEASUREMENTS ON LINK REPORT PERIOD: ACTIVE REPORT INTERVAL: 12-02-10, 05:30:00 THROUGH CURRENT
LINK-COMP MEASUREMENTS: LOC: 1104, LINK: A , LSN: mtp2 (MTP2)
MSGSTRAN = 0, MSGSRCVD = 0, MSURETRN = 0, OCTRETRN = 0, MOCTTRAN = 0, MOCTRCVD = 0, MTCEUSG = 0, DURLKOTG = 515, MSGSRGTT = 0, MOCTRGTT = 0, TDCNGLV1 = 0, TDCNGLV2 = 0, TDCNGLV3 = 0, ECCNGLV1 = 0, ECCNGLV2 = 0, ECCNGLV3 = 0, MSGDISC0 = 0, MSGDISC1 = 0, MSGDISC2 = 0, MSGDISC3 = 0, LNKAVAIL = 0, NMGWSDSABL = 0
;
FTP Output Examples
Table 23: COMP LINK Column Headers
DescriptionField Name
Linkset nameLSN
Card locationLOC
Link portLINK
Link typeLNKTYPE
FTP Example Output File Name: comp-link_20101004_1000.csv
FTP Example Output File Format:
"CLLI","SWREL","RPTDATE","RPTIME","TZ","RPTTYPE","RPTPD","IVALDATE","IVALSTART","IVALEND","NUMENTIDS"<cr><lf>"tekelecstp","EAGLE5 44.0.0-64.23.0","2012-02-10","05:39:32","EST ","COMPONENT MEASUREMENTS ON LINK","LAST","2012-02-10","05:00:00","05:30:00",5<cr><lf><cr><lf>"STATUS","LSN","LOC","LINK","LNKTYPE","MSGSTRAN","MSGSRCVD","MSURETRN","OCTRETRN","MOCTTRAN","MOC
84E86977 Revision 1, July 2017
ReportsMeasurements
TRCVD","MTCEUSG","DURLKOTG","MSGSRGTT","MOCTRGTT","TDCNGLV1","TDCNGLV2","TDCNGLV3","ECCNGLV1","ECCNGLV2","ECCNGLV3","MSGDISC0","MSGDISC1","MSGDISC2" "MSGDISC3","LNKAVAIL","NMGWSDSABL","OUTCELLS", "INCCELLS","SDPDUTRN","SDPDURCV","SDPDURTR","LMSUTRN","LMSURCV","LMSUOCTTRN","LMSUOCTRCV","LMSUTRNDSC","LMSURCVDSC","M2PUDMTR","M2PUDOCT","M2PUDMRC","M2PUDOCR","M2PLKNIS","ECLNKCB","ECLNKXCO"<cr><lf>"K","hcmimt1","1203","A ","MTP2-UNCH",0,0,0,0,0,0,0,192,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, 0,0,0,0,0,0,0,0,0,0,0,0,0<cr><lf>"K","ipsg","1103","A ","IPVL",0,0,0,0,0,0,192,192,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, 0,0,0,0,0,0,0,0,0,0<cr><lf>"K","mtp2","1104","A ","MTP2",0,0,0,0,0,0,0,192,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, 0,0,0,0,0,0,0,0,0<cr><lf>"K","ssedcm1","1105","A ","IPVHSL",0,0,0,0,0,0,0,192,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, 0,0,0,0,0,0,0,0,192,0,0<cr><lf>"K","saal","1112","A ","SAAL",0,0,0,0,0,0,192,192,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, 0,0,0,0,0,0,0,0,0,0<cr><lf>
Assuming each data line will be:
4 char status + 13 char LSN + 7 char LOC + 6 char LINK + 12 char LNKTYPE + 40*(6 char data) +2 = 284 chars
Table 24: Typical File Size: comp-link.csv
File Size=Report data+Reportheader+
Systemheader
142,736 bytes=142,000+486+250
LNKSET COMP Report
LNKSET COMP reports are an aggregation of register values of all the LINKs contained by the LNKSET.The report is marked I when the card hosting the link is OOS or ISOLATED at any time during theinterval. Otherwise, when the card hosting a link is IS-NR throughout the interval, that interval ismarked K.
Certain registers are reported for MTP2, SAAL, IPVL, and IPVHSL classes. These registers aresummarized in the following table.
Table 25: Registers Reported Per LINKSET CLASS
IPVHSLIPVLSAALMTP2Register Name
XXXXGTTMSCNVTD
XINCCELLS
XXXXMSGWSDSLIM
XXXXMSGSRCVD
85E86977 Revision 1, July 2017
ReportsMeasurements
IPVHSLIPVLSAALMTP2Register Name
XXXXMSGSRGTT
XXXXMSGSTRAN
XXXXMTPMSCNVTD
XXXXMOCTRGTT
XXXXMOCTRCVD
XXXXMOCTTRAN
XOUTCELLS
XXXXSCCPLOOP
XSDPDURCV
XSDPDURTR
XSDPDUTRN
XXXXTDLSINAC
XXXXZTTMAPI
XXXXZTTMAPO
Command Examples
• UI
rept-meas:type=comp:enttype=lnkset:lsn=xy212
• FTP:
rept-ftp-meas:type=comp:enttype=lnkset
Measurement Events
Table 26: Component Linkset Measurements
UnitDescriptionEvent Name
peg countTotal GT Routed SCCP MSUsConverted.
GTTMSCNVTD
peg countTotal incoming NDC-valid ATMcells on the HSL’s VCL,
INCCELLS
including UI and OAM cells butexcluding idle/unassigned cells.
86E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
octetsMessage Octets Received forMessages RequiringGTT -
MOCTRGTT
Total number of octets receivedassociated with incomingMessages requiring global titletranslation (GTT), includingoctets removed in MTP level 2processing, e.g. CRC and flag.
• For SAAL class linksets,applies to MTP level 3message bytes.
octetsMessage Octets Received -MOCTRCVD
Total number of octets associatedwith Messages received,including those removed forMTP level 2 processing andthose for which retransmissionhas been requested.
• For SAAL, IPVL, IPVHSL,and IPVLGW class linksets -applies to MTP level 3message bytes.
octetsMessage Octets Transmitted -Total number of octets associated
MOCTTRAN
with Messages transmitted to thefar-end. For all linkset classes,this includes octets for MTP level3 SIO and SIF.
• For MTP2 class linksets,octets included are thoseassociated with Messagestransmitted ANDacknowledged by level 2, aswell as any retransmittedMessages. Additional octetsincluded are MTP level 2 flag,BSN/BIB, FSN/BIB, LI, andCRC octets.
• For SAAL and IPVHSL classlinksets, octets are notincluded until the Message isacknowledged by level 2.
• For IPVL and IPVLGW classlinks, octets are not included
87E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
until the Message istransmitted by level 2. ForIPVLGW class linksets, SNMs(Messages with SI=0) areNOT included.
peg countMSUs Received - Total numberof MSUs received, including
MSGSRCVD
those for which retransmissionhas been requested.
• For SAAL, IPVL, IPVHSL,and IPVLGW class linksets -applies to MTP level 3messages
peg countMSUs Received Requiring GTT- Total number of incoming
MSGSRGTT
MSUs requiring global titletranslation (GTT).
• For SAAL class linksets,applies to MTP level 3messages.
peg countMSUs Transmitted -MSGSTRAN
Total number of MSUstransmitted to the far-end,including retransmissions.
• For MTP2 class links, MSUstransmitted ANDacknowledged by level 2.
• For SAAL, IPVL, IPVHSL,and IPVLGW class linksets,MTP level 3 messages offeredfor transmission after anyrequired conversion fromtheir respective M2PA,M3UA, or SUA formats.
peg countMSUs lost due to GatewayScreening being Disabled on a
MSGWSDSLIM
LIM - These MSUs werediscarded because the gatewayscreening function was disabled.Gateway screening may havebeen disabled because the screenset was unavailable. Thiscondition can also occur if the
88E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
screen set data is invalid orgateway screening discard is on.
peg countTotal MTP Routed SCCP MSUsConverted.
MTPMSCNVTD
peg countTotal outgoing NDC-valid ATMcells on the HSL’s VCL,
OUTCELLS
including UI and OAM cells butexcluding idle/unassigned cells.
peg countThe total number of times that aGTT translation matched a Point
SCCPLOOP
Code in the STP’s loopset entriesresulting in either a notify ordiscard of an SCCP message.
This register is reported as zeroin ACTIVE, “period=active”,measurement linkset reports.
peg countSSCOP SD PDUs received - Thenumber of SSCOP SD PDUs that
SDPDURCV
were received during theindicated interval.
peg countSSCOP SD PDUs Retransmitted- The number of SSCOP
SDPDURTR
sequenced Data PDUs that wereretransmitted, based on anaccumulated count of suchretransmissions conveyed to LM.
peg countSSCOP SD PDUs Transmitted- The number of SSCOP
SDPDUTRN
sequenced Data (SD) PDUs thatwere transmitted, includingretransmissions.
statusIndication of Data Validity:STATUS
K indicates good dataI indicates incompleteintervalN indicates data not current
secondsTotal Duration of Link SetInactivity - The total time that
TDLSINAC
all links in the linkset wereunavailable to MTP level 3,regardless if they were made
89E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
unavailable manually orautomatically.
peg countTranslation Type mappingtranslation performed - MSUs
ZTTMAPI
received on the gateway linkset- The total number of TranslationType Mapping translationsperformed for Message SignalUnits (MSUs) received on thegateway link set (i.e., incoming).
peg countTranslation Type MappingTranslation Performed - MSUs
ZTTMAPO
Transmitted on the GatewayLink Set - The total number ofTranslation Type Mappingtranslations performed forMessage Signal Units(MSUs)transmitted on the gateway linkset (i.e., outgoing).
UI Output Examples
• rept-meas:type=comp:enttype=lnkset:lsn=xxxx
tekelecstp 12-02-10 04:37:20 EST EAGLE5 44.0.0 TYPE OF REPORT: COMPONENT MEASUREMENTS ON LNKSET REPORT PERIOD: LAST REPORT INTERVAL: 12-02-10, 04:00:00 THROUGH 04:29:59
LNKSET-COMP MEASUREMENTS: ipsg (IPVL)
These measurements are from 12-02-10, 04:00:00 through 04:29:59. MSGSTRAN = 0, MSGSRCVD = 0, MOCTTRAN = 0, MOCTRCVD = 0, MSGSRGTT = 0, MOCTRGTT = 0, TDLSINAC = 0, MSGWSDSLIM = 0, ZTTMAPO = 0, ZTTMAPI = 0, MTPMSCNVTD = 0, GTTMSCNVTD = 0, SCCPLOOP = 0
;
tekelecstp 12-02-10 04:34:04 EST EAGLE5 44.0.0 TYPE OF REPORT: COMPONENT MEASUREMENTS ON LNKSET REPORT PERIOD: LAST REPORT INTERVAL: 12-02-10, 04:00:00 THROUGH 04:29:59
LNKSET-COMP MEASUREMENTS: mtp2 (MTP2)
These measurements are from 12-02-10, 04:00:00 through 04:29:59. MSGSTRAN = 0, MSGSRCVD = 0, MOCTTRAN = 0, MOCTRCVD = 0, MSGSRGTT = 0, MOCTRGTT = 0, TDLSINAC = 0, MSGWSDSLIM = 0, ZTTMAPO = 0, ZTTMAPI = 0, MTPMSCNVTD = 0, GTTMSCNVTD = 0,
90E86977 Revision 1, July 2017
ReportsMeasurements
SCCPLOOP = 0
;
tekelecstp 12-02-10 04:38:11 EST EAGLE5 44.0.0 TYPE OF REPORT: COMPONENT MEASUREMENTS ON LNKSET REPORT PERIOD: LAST REPORT INTERVAL: 12-02-10, 04:00:00 THROUGH 04:29:59
LNKSET-COMP MEASUREMENTS: ssedcm1 (IPVHSL)
These measurements are from 12-02-10, 04:00:00 through 04:29:59. MSGSTRAN = 0, MSGSRCVD = 0, MOCTTRAN = 0, MOCTRCVD = 0, MSGSRGTT = 0, MOCTRGTT = 0, TDLSINAC = 0, MSGWSDSLIM = 0, ZTTMAPO = 0, ZTTMAPI = 0, MTPMSCNVTD = 0, GTTMSCNVTD = 0, SCCPLOOP = 0
;
tekelecstp 12-03-20 09:19:21 EST EAGLE5 44.0.0 TYPE OF REPORT: COMPONENT MEASUREMENTS ON LNKSET REPORT PERIOD: LAST REPORT INTERVAL: 12-03-20, 08:30:00 THROUGH 08:59:59
LNKSET-COMP MEASUREMENTS: saal (SAAL)
These measurements are from 12-03-20, 08:30:00 through 08:59:59. MSGSTRAN = 0, MSGSRCVD = 0, MOCTTRAN = 0, MOCTRCVD = 0, MSGSRGTT = 0, MOCTRGTT = 0, TDLSINAC = 0, MSGWSDSLIM = 0, ZTTMAPO = 0, ZTTMAPI = 0, OUTCELLS = 1565, INCCELLS = 0, SDPDUTRN = 0, SDPDURCV = 0, SDPDURTR = 0, MTPMSCNVTD = 0, GTTMSCNVTD = 0, SCCPLOOP = 0
;
tekelecstp 12-03-20 09:21:54 EST EAGLE5 44.0.0 TYPE OF REPORT: COMPONENT MEASUREMENTS ON LNKSET REPORT PERIOD: LAST REPORT INTERVAL: 12-03-20, 08:30:00 THROUGH 08:59:59
LNKSET-COMP MEASUREMENTS: hcmimt1 (MTP2-UNCH)
These measurements are from 12-03-20, 08:30:00 through 08:59:59. MSGSTRAN = 0, MSGSRCVD = 0, MOCTTRAN = 0, MOCTRCVD = 0, MSGSRGTT = 0, MOCTRGTT = 0, TDLSINAC = 0, MSGWSDSLIM = 0, ZTTMAPO = 0, ZTTMAPI = 0, MTPMSCNVTD = 0, GTTMSCNVTD = 0, SCCPLOOP = 0
;
• rept-meas:type=comp:enttype=lnkset:lsn=xxxx:period=active
tekelecstp 12-02-10 04:44:15 EST EAGLE5 44.0.0 TYPE OF REPORT: COMPONENT MEASUREMENTS ON LNKSET REPORT PERIOD: ACTIVE REPORT INTERVAL: 12-02-10, 04:30:00 THROUGH CURRENT
LNKSET-COMP MEASUREMENTS: mtp2 (MTP2)
91E86977 Revision 1, July 2017
ReportsMeasurements
MSGSTRAN = 0, MSGSRCVD = 0, MOCTTRAN = 0, MOCTRCVD = 0, MSGSRGTT = 0, MOCTRGTT = 0, TDLSINAC = 0, MSGWSDSLIM = 0, ZTTMAPO = 0, ZTTMAPI = 0, MTPMSCNVTD = 0, GTTMSCNVTD = 0, SCCPLOOP = 0
;
FTP Output Examples
Table 27: COMP LINKSET Column Headers
DescriptionFieldName
Linksetname
LSN
Link typeLNKTYPE
FTP Example Output File Name: comp-lnkset_20101004_1000.csv
FTP Example Output File Format:
"CLLI","SWREL","RPTDATE","RPTIME","TZ","RPTTYPE","RPTPD","IVALDATE","IVALSTART","IVALEND","NUMENTIDS"<cr><lf>"tekelecstp","EAGLE5 44.0.0-64.23.0","2012-02-10","04:45:24","EST ","COMPONENT MEASUREMENTS ON LNKSET","LAST","2012-02-10","04:00:00","04:30:00",5<cr><lf><cr><lf>"STATUS","LSN","LNKTYPE","MSGSTRAN","MSGSRCVD","MOCTTRAN","MOCTRCVD","MSGSRGTT","MOCTRGTT","TDLSI
NAC","MSGWSDSLIM","ZTTMAPO","ZTTMAPI","OUTCELLS","INCCELLS","SDPDUTRN","SDPDURCV","SDPDURTR","MTPMSCNVTD","GTTMSCNVTD","SCCPLOOP"<cr><lf>"K","mtp2","MTP2",0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0<cr><lf>"K","ipsg","IPVL",0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0<cr><lf>"K","ssedcm1","IPVHSL",0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0<cr><lf>"K","saal","SAAL",0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0<cr><lf>"K","hcmimt1","MTP2-UNCH",0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0<cr><lf>
Assuming each data line will be:
4 char status + 13 char LSN + 12 char LKNTYPE + 18*(6 char data) + 2 = 139 chars
For a report of 500 linksets, typical file size is:
Table 28: Typical File Size: comp-lnkset.csv
File Size=Report data+Reportheader+
Systemheader
69,979 bytes=69,500+229+250
92E86977 Revision 1, July 2017
ReportsMeasurements
SCTPASOC COMP Report
The per association SCTP layer measurements and reports are shown below.
Command Examples
• UI: rept-meas:type=comp:enttype=sctpasoc:aname=assoc1
• FTP: rept-ftp-meas:type=comp:enttype=sctpasoc
Measurement Events
Table 29: Component SCTPASOC Measurements
UnitDescriptionEvent Name
msecSCTP Association MaximumObserved Retransmission
ASMAXRTO
Timeout - The maximumobserved value of the SCTP statevariable Retransmission Timeout(RTO) in milliseconds (ms) forSCTP packets transmitted (butnot retransmitted) to the remotepeer endpoint’s destinationtransport address during themeasurement interval.
peg countSCTP Aborted Associations -The number of times that SCTP
ASOCABTD
associations have made a directtransition to the CLOSED statefrom any state using theprimitive “Abort” (AnyState--Abort--> CLOSED), conveyingan ungraceful termination of theassociation.
peg countSCTP Association Shutdowns- The number of times that SCTP
ASOCSHTD
associations have made a directtransition to the CLOSED statefrom either theSHUTDOWN-SENT state or theSHUTDOWN-ACK-SENT state,conveying graceful terminationof the association.
peg countSCTP Control Chunks Received- The number of SCTP control
CNTLCHKR
93E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
chunks received from the remotepeer (excluding duplicates).
CNTLCHKR register excludesinitial SCTP association set-upmessages (INIT andCOOKIE-ECHO).
peg countSCTP Control Chunks Sent -The number of SCTP control
CNTLCHKS
chunks sent to the remote peer(excluding retransmissions),including ABORT messages,after an association has beenformed and the association ID isknown (see SCPKTRCV andSCPKTSNT).
peg countNumber of SCTP DATA chunksreceived from the remote SCTP
DATCHKRC
peer (excluding duplicates anddiscards).
peg countNumber of SCTP DATA chunkssent to the remote SCTP peer(excluding retransmissions).
DATCHKSN
secondsDuration the association was notin the Established state.
DURASNEST
peg countNumber of times the associationtransitioned out of theEstablished state.
ECASNEST
peg countSCTP Gap AcknowledgementsReceived - The number of Gap
GAPACKSR
Acknowledgement blocks inSelective Acknowledgement(SACK) control chunks receivedfrom the remote SCTP peer,indicating gaps in the peer’sreceived subsequences of DATAchunks as represented by theirTransport Sequence Numbers(TSNs). (The inclusion of thismeasurement is intended toallow network personnel toassess the message-deliveryperformance of the IPVHSLrelative to gap acknowledgmentlimits, if used as performance
94E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
criteria for link proving andin-service monitoring.)
peg countSCTP Ordered Data ChunksReceived - The number of SCTP
ORDCHKRC
ordered data chunks receivedfrom the remote peer (excludingduplicates).
peg countSCTP Ordered Data ChunksSent - The number of SCTP
ORDCHKSN
ordered data chunks sent to theremote peer (excludingretransmissions).
peg countSCTP Association PeerEndpoint Failures - The number
PEERFAIL
of peer endpoint failuredetection events for theassociation as triggered by thecrossing of threshold theassociation maximumretransmissions.
peg countSCTP AssociationRetransmitted Chunks - The
RTXCHNKS
number of SCTP data chunksretransmitted to the remoteSCTP peer. When T3-rtx expires,the DATA chunks that triggeredthe T3 timer will be re-sentaccording with theretransmissions rules. EveryDATA chunk that was includedin the SCTP packet that triggeredthe T3-rtx timer must be addedto the value of this counter.
octetsSCTP Packet Octets Received -The number of octets comprising
SCOCTRCV
valid SCTP packets receivedfrom the remote peer after anassociation has been formed.
octetsSCTP Packet Octets Sent - Thetotal number of octets
SCOCTSNT
comprising SCTP packetssubmitted to the IP layer fortransmittal to the remote peer fora specific association.
95E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
peg countSCTP Packets Received - Thetotal number of SCTP packets
SCPKTRCV
received from the remote peerthat had a valid checksum.Duplicates are included.
SCPKTRCV register excludes thepegging of SCTP Packetsreceived when the association IDis unknown (that is, theassociation parameter "OPEN"has value "NO" for all the linksconfigured on the card; theassociation ID is known whenINITs are received for openserver-mode associations or it isestablished). Also, excludespegging of ABORT messages.
peg countSCTP Packets Sent - The totalnumber of SCTP packets sent to
SCPKTSNT
the remote peer, i.e., submittedby the local SCTP instance to theIP layer for transmission.Retransmissions are included.
The SCPKTSNT register can bepegged as either per card or perassociation. Association totalsexclude initial SCTP associationset-up messages (INIT,INIT-ACK, COOKIE ECHO, andCOOKIE-ACK) and ABORTmessages if the association ID isknown (the association ID isknown when INITs are receivedfor open server-modeassociations or it is established).
statusIndication of Data Validity:STATUS
K indicates good dataI indicates incompleteintervalN indicates data not current
96E86977 Revision 1, July 2017
ReportsMeasurements
UI Output Examplesrept-meas:type=comp:enttype=sctpasoc:aname=assoc1
stdcfg2b 07-12-31 01:00:04 EST UNKNOWN 38.0.0-XX.XX.0 TYPE OF REPORT: COMPONENT MEASUREMENTS ON SCTPASOC REPORT PERIOD: LAST REPORT INTERVAL: 07-12-31 00:30:00 THRU 00:59:59
SCTPASOC-COMP MEASUREMENTS: ASSOC: assoc1
These measurements are from 07-12-31, 00:30:00 through 00:59:59. ECASNEST = 0, DURASNEST = 0, DATCHKSN = 0, RTXCHNKS = 0, DATCHKRC = 0, SCPKTSNT = 20, SCPKTRCV = 20, SCOCTSNT = 0, SCOCTRCV = 0, CNTLCHKS = 400, ORDCHKSN = 400, CNTLCHKR = 0, ORDCHKRC = 0, GAPACKSR = 0, ASOCABTD = 0, ASOCSHTD = 0, PEERFAIL = 0, ASMAXRTO = 0,
FTP Output Examples
Table 30: COMP SCTPASOC Column Headers
DescriptionFieldName
AssociationASSOC
FTP Example Output File Name:comp-sctpasoc_20071115_1200.csv
FTP Example Output File Format (showing optional 15 minute interval):
"CLLI","SWREL","RPTDATE","RPTIME","TZ","RPTTYPE","RPTPD","IVALDATE","IVALSTART","IVALEND","NUMENTIDS"<cr><lf>"ipmeas","UNKNOWN ??.?.?-58.21.0","2007-08-17","19:30:03","****","COMPONENT MEASUREMENTS ON SCTPASOC","LAST","2007-08-17","19:15:00","19:30:00",3<cr><lf>"STATUS","ASSOC","ECASNEST","DURASNEST","DATCHKSN","RTXCHNKS","DATCHKRC","SCPKTSNT","SCPKTRCV","SCOCTSNT","SCOCTRCV","CNTLCHKS","ORDCHKSN","CNTLCHKR","ORDCHKRC","GAPACKSR","ASOCABTD","ASOCSHTD","PEERFAIL","ASMAXRTO"<cr><lf>"K","A1101",0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0<cr><lf>"K","A1102",0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0<cr><lf>"K","A1103",0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0<cr><lf>
Assuming each data line will be:
4 char status + 18 char association + 18*(6 char data) + 2 = 132 char
For a report of 1000 associations, the typical file size is:
Table 31: Typical File Size: comp-sctpasoc.csv
File Size=Report data+Reportheader+
Systemheader
132425 bytes=132000+175+250
97E86977 Revision 1, July 2017
ReportsMeasurements
SCTPCARD COMP Report
The per card SCTP layer measurements and reports are shown below.
Command Examples
• UI: rept-meas:type=comp:enttype=sctpcard:loc=1204
• FTP: rept-ftp-meas:type=comp:enttype=sctpcard
Measurement Events
Table 32: Component SCTPCARD Measurements
UnitDescriptionEvent Name
peg countSCTP Aborted Associations -The number of times that SCTP
ASOCABTD
associations have made a directtransition to the CLOSED statefrom any state using theprimitive “Abort” (AnyState--Abort--> CLOSED), conveyingan ungraceful termination of theassociation.
peg countSCTP Association Shutdowns- The number of times that SCTP
ASOCSHTD
associations have made a directtransition to the CLOSED statefrom either theSHUTDOWN-SENT state or theSHUTDOWN-ACK-SENT state,conveying graceful terminationof the association.
peg countSCTP Control Chunks Received- The number of SCTP control
CNTLCHKR
chunks received from the remotepeer (excluding duplicates). Noregister will be pegged if amessage intended for anassociation is received and thatassociation is in the CLOSEDstate.
peg countSCTP Control Chunks Sent -The number of SCTP control
CNTLCHKS
chunks sent to the remote peer(excluding retransmissions),
98E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
including chunks for which anassociation has not been formed.
peg countNumber of SCTP DATA chunksreceived from the remote SCTP
DATCHKRC
peer (excluding duplicates anddiscards).
peg countNumber of SCTP DATA chunkssent to the remote SCTP peer(excluding retransmissions).
DATCHKSN
peg countSCTP Ordered Data ChunksReceived - The number of SCTP
ORDCHKRC
ordered data chunks receivedfrom the remote peer (excludingduplicates).
peg countSCTP Ordered Data ChunksSent - The number of SCTP
ORDCHKSN
ordered data chunks sent to theremote peer (excludingretransmissions).
peg countSCTP AssociationRetransmitted Chunks - The
RTXCHNKS
number of SCTP data chunksretransmitted to the remoteSCTP peer. When T3-rtx expires,the DATA chunks that triggeredthe T3 timer will be re-sentaccording with theretransmissions rules. EveryDATA chunk that was includedin the SCTP packet that triggeredthe T3-rtx timer must be addedto the value of this counter.
octetsSCTP Packet Octets Received -The number of octets comprising
SCOCTRCV
valid SCTP packets receivedfrom the remote peer, includingpackets for which an associationhas not yet been formed.
octetsSCTP Packet Octets Sent - Thetotal number of octets
SCOCTSNT
comprising SCTP packetssubmitted to the IP layer fortransmittal to the remote peer,
99E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
including packets for which anassociation has not yet beenformed.
peg countSCTP Packets Received - Thetotal number of SCTP packets
SCPKTRCV
received from the remote peerthat had a valid checksum.Duplicates are included.
SCPKTRCV register excludes thepegging of SCTP Packetsreceived when no instance existson the card for any of theassociations , i.e., the associationparameter "OPEN" has value"NO" for all the associationsconfigured on the card. Also,excludes pegging of set upmessages (INIT andCOOKIE-ECHO) that are part ofassociation establishmentprocedure. (See UNASCTPKregister.)
peg countSCTP Packets Received WithChecksum ErrorThe number of
SCPKTRER
SCTP packets received fromremote peers with an invalidchecksum.
peg countSCTP Packets Sent - The totalnumber of SCTP packets sent to
SCPKTSNT
the remote peer, i.e., submittedby the local SCTP instance to theIP layer for transmission.Retransmissions are included.
SCPKTSNT register excludesinitial SCTP association set-upmessages (INIT-ACK andCOOKIE-ACK). For M2PAassociation INIT packet is neverpegged.
statusIndication of Data Validity:STATUS
K indicates good dataI indicates incompleteintervalN indicates data not current
100E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
peg countUnassociated (Out-of-the-Blue)SCTP PacketsThe number of
UNASCTPK
“out-of-the-blue” SCTP packetsreceived by the host, i.e., SCTPpackets correctly formed withthe correct checksum value, butfor which the receiver (localSCTP) was not able to identifythe association to which thepacket belongs.
UNASCTPK register includesthe pegging of SCTP Packetsreceived when no instance existson the card for any of theassociations, i.e., the associationparameter "OPEN" has value"NO" for all the associationsconfigured on the card. (SeeSCPKTRCV register).
UI Output Examples
stdcfg2b 07-12-31 01:00:04 EST UNKNOWN 47 TYPE OF REPORT: COMPONENT MEASUREMENTS ON SCTPCARD REPORT PERIOD: LAST REPORT INTERVAL: 07-12-31 00:30:00 THRU 00:59:59
SCTPCARD-COMP MEASUREMENTS: LOC: 1204
These measurements are from 07-12-31, 00:30:00 through 00:59:59. DATCHKSN = 0, RTXCHNKS = 0, DATCHKRC = 0, SCPKTSNT = 20, SCPKTRCV = 20, SCPKTRER = 0, UNASCTPK = 0, SCOCTSNT = 0, SCOCTRCV = 0, CNTLCHKS = 400, ORDCHKSN = 400, CNTLCHKR = 0, ORDCHKRC = 0, ASOCABTD = 0, ASOCSHTD = 0
FTP Output Examples
Table 33: COMP SCTPCARD Column Header
DescriptionFieldName
LocationLOC
FTP Example Output File Name: comp-sctpcard_20071115_1200.csv
FTP Example Output File Format:
"CLLI","SWREL","RPTDATE","RPTIME","TZ","RPTTYPE","RPTPD","IVALDATE","IVALSTART","IVALEND","NUMENTIDS"<cr><lf>
101E86977 Revision 1, July 2017
ReportsMeasurements
"tekelecstp",”38.0.0-XX.XX.0”,”2007-12-31”,"12:11:37","EST","COMPONENT MEASUREMENTS ON SCTPCARD","LAST",”2007-12-31”,"11:45:00","12:00:00",3<cr><lf><cr><lf>"STATUS","LOC","DATCHKSN","RTXCHNKS","DATCHKRC","SCPKTSNT","SCPKTRCV","SCPKTRER","UNASCTPK","SCOCTSNT","SCOCTRCV","CNTLCHKS","ORDCHKSN","CNTLCHKR","ORDCHKRC","ASOCABTD","ASOCSHTD"<cr><lf>"K","1101",0,0,0,0,0,0,0,0,0,0,0,0,0,0,0<cr><lf>"K","1102",0,0,0,0,0,0,0,0,0,0,0,0,0,0,0<cr><lf>"K","1103",0,0,0,0,0,0,0,0,0,0,0,0,0,0,0<cr><lf>
Assuming each data line will be:
4 char status + 7 char location + 15*(6 char data) + 2 = 103 chars
For a report of 80 cards, the typical file size is:
Table 34: Typical File Size: comp-sctpcard.csv
File Size=Report data+Reportheader+
Systemheader
8650 bytes=8240+160+250
UA COMP Report
The per Application Server/Association UA layer measurements and reports are shown below.
Command Examples
• UI: rept-meas:type=comp:enttype=ua:asname=appsrvr1:aname=assoc1
• FTP: rept-ftp-meas:type=comp:enttype=ua
Measurement Events
Table 35: Component UA Measurements
UnitDescriptionEvent Name
peg countFor M3UA, this registerrepresents the number of DATA
RXDATAMS
messages received from the ASP.For SUA, this register representsthe total of CLDT and CLDRmessages received from the ASP.
octetsFor M3UA, this registerrepresents the number of DATA
RXDATAOC
octets received from the ASP. ForSUA, this register represents thetotal of CLDT and CLDR octetsreceived from the ASP.
102E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
peg countNumber of messages receivedwith multiple routing contexts
RXMLRCMS
(always pegged against thedefault AS).
statusIndication of Data Validity:STATUS
K indicates good dataI indicates incompleteintervalN indicates data not current
peg countTXDATAMS • For M3UA, this registerrepresents the number ofDATA messages sent to theASP.
• For SUA, this registerrepresents the total of CLDTand CLDR messages sent tothe ASP.
octetsTXDATAOC • For M3UA, this registerrepresents the number ofDATA octets sent to the ASP.
• For SUA, this registerrepresents the total of CLDTand CLDR octets sent to theASP.
peg countTotal ASPM messages receivedfrom the ASP (including ASPSMand ASPTM messages).
UAASPMRX
peg countTotal ASPM messages sent to theASP (including ASPSM andASPTM messages).
UAASPMTX
peg countThe number of times the ASPtransitioned out of theASP-Active state.
UAASPNAC
secondsThe duration that the ASP wasnot in the ASP-Active state.
UAASPNAT
peg countThe number of times anAS-ASSOC experienced
UACNGCNT
congestion (this may include theAS entering congestion as aresult of the ASSOC enteringcongestion).
103E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
secondsThe duration that an AS-ASSOCexperienced congestion (this
UACNGTIM
may include the AS enteringcongestion as a result of theASSOC entering congestion).
peg countTotal MGMT messages receivedfrom the ASP.
UAMGMTRX
peg countTotal MGMT messages sent tothe ASP.
UAMGMTTX
peg countTotal Network Managementoctets received from the ASP -
UANMOCTR
The total number of non-DATAUA octets received from the ASP(i.e., sum of the ASPM, ASPTM,SSNM, MGMT, and RKM).
peg countTotal Network Managementoctets sent to the ASP - The total
UANMOCTT
number of non-DATA UA octetssent to the ASP (i.e., sum of theASPM, ASPTM, SSNM, MGMT,and RKM).
peg countTotal Network Managementmessages received from the
UANMMSGR
ASP - The total number ofnon-DATA UA messagesreceived from the ASP (i.e., sumof the ASPM, ASPTM, SSNM,MGMT, and RKM).
peg countTotal Network Managementmessages sent to the ASP - The
UANMMSGT
total number of non-DATA UAmessages sent to the ASP (i.e.,sum of the ASPM, ASPTM,SSNM, MGMT, and RKM).
peg countTotal SSNM messages receivedfrom the ASP.
UASSNMRX
peg countTotal SSNM messages sent to theASP.
UASSNMTX
104E86977 Revision 1, July 2017
ReportsMeasurements
UI Output Examples
stdcfg2b 07-12-31 01:00:04 EST UNKNOWN 38.0.0-XX.XX.0 TYPE OF REPORT: COMPONENT MEASUREMENTS ON UA REPORT PERIOD: LAST REPORT INTERVAL: 07-12-31 00:30:00 THRU 00:59:59
UA-COMP MEASUREMENTS: AS: appsrvr1 ASSOC: assoc1
These measurements are from 07-12-31, 00:30:00 through 00:59:59. RXDATAMS = 100, RXDATAOC = 4000, TXDATAMS = 200, TXDATAOC = 8000, UANMMSGT = 0, UANMOCTT = 0, UANMMSGR = 0, UANMOCTR = 0, UAASPMTX = 0, UAASPMRX = 0, UASSNMTX = 0, UASSNMRX = 0, UAMGMTTX = 0, UAMGMTRX = 0, UACNGCNT = 0, UACNGTIM = 0, UAASPNAC = 0, UAASPNAT = 0, RXMLRCMS = 0
;
FTP Output Examples
Table 36: COMP UA Column Headers
DescriptionFieldName
Application servername
AS
Association nameASSOC
FTP Example Output File Name: comp-ua_20071115_1200.csv
FTP Example Output File Format:
"CLLI","SWREL","RPTDATE","RPTIME","TZ","RPTTYPE","RPTPD","IVALDATE","IVALSTART","IVALEND","NUMENTIDS"<cr><lf>"tekelecstp",”38.0.0-XX.XX.0”,”2007-12-31”,"12:11:37","EST","COMPONENT MEASUREMENTS ON UA","LAST",”2007-12-31”,"11:45:00","12:00:00",3<cr><lf><cr><lf>"STATUS","AS","ASSOC","RXDATAMS","RXDATAOC","TXDATAMS","TXDATAOC","UANMMSGT","UANMOCTT","UANMMSGR","UANMOCTR","UAASPMTX","UAASPMRX","UASSNMTX","UASSNMRX","UAMGMTTX","UAMGMTRX","UACNGCNT","UACNGTIM","UAASPNAC","UAASPNAT","RXMLRCMS"<cr><lf>"K","as1101","a1101",0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0<cr><lf>"K","as1102","a1102",0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0<cr><lf>"K","as1103","a1103",0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0<cr><lf>
Assuming each data line will be:
4 char status + 15 char AS + 15 char ASSOC + 19*(6 char data) + 2 = 150 chars
For a report of 1000 AS/ASSOC pairs, typical file size is:
105E86977 Revision 1, July 2017
ReportsMeasurements
Table 37: Typical File Size: comp-ua.csv
File Size=Report data+Reportheader+
Systemheader
150530 bytes=150000+280+250
Network Management Measurements (NM)
Network Management Reports provide measurement data on STP traffic, Global Title Translations,and MTP Network Management.
Entity Types:STP, Lnkset, and Link
Accumulation Interval: 5 minutes
STP Retention Period: 5 minutes
Reporting Mode: Scheduled, On-demand, SEAS autonomous
Accessible Collection Period: Last (STP, LINK, LNKSET), Active (LINK, LNKSET)
STP NM Report
STP-NM measurements are a system total of the STP, GTT, and MTP network management traffic.STP collection is the aggregated register totals of OAM and LIM/SCCP cards. If any one of these cardsare isolated/re-booted during the collection period, measurements data is not provided to the OAMor MCPM and the interval is marked as I because at least one of the cards did not provide data.Measurement intervals for which the OAM and all LIM/SCCP cards are IS-NR throughout themeasurement interval generate K reports.
enttype=stp
Example Commands:
UI: rept-meas:type=nm:enttype=stpFTP: rept-ftp-meas:type=nm:enttype=stp
Table 38: Network Management STP Measurements
UnitDescriptionEvent Name
peg countGTTs Performed - Usually, thetotal number of MSUs that
GTTPERFD
successfully completed globaltitle translation (GTT). Alsoincludes G-Port and INPMSUsthat got a match in either theG-Port, INP, or GTT DB.
Sometimes, GTTPERFD indicatesthe total number of global title
106E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
translations (GTTs) performedon MSUs that successfullycompleted GTT, because severalGTTs may happen for the sameMSU. One scenario wheremultiple GTTs occur for an MSUoccurs is when the ANSI/ITUSCCP Conversion Feature isactivated. In this case, the countfor GTTPERFD can be doublewhat it would be without thefeature, although the number ofMSUs received by the EAGLEdid not change.
peg countGTTs Unable to Perform -Diagnostic 0: No Translation for
GTTUN0NS
Address of Such Nature – Totalnumber of times that thespecified translation type in anMSU was not supported by theSTP or the form of the GTT wasincorrect for the giventranslation type.
peg countGTTs Unable to Perform -Diagnostic 1: No Translation for
GTTUN1NT
This Address – Number of timesthat a match for the global titlecould not be found in thetranslation table.
peg countMSUs Returned – Total numberof IDP messages returned to
MSIDPMATCH
originating MSC. Thesemessages bypass the prepaidengine since it has beendetermined that they meet thecriteria for subscribers withunlimited prepaid calling plan.
peg countMSUs Relayed - Total numberof IDP messages relayed to theirdestination.
MSIDPNOMCH
peg countMSUs Rcvd – Invalid DPC - Thenumber of MSUs received and
MSINVDPC
discarded because the DPCcould not be found in the STProuting table.
107E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
peg countMSUs Discarded – InvalidSIF -Number of MSUs that have been
MSINVSIF
received and discarded becauseof an invalid SIF.
peg countMSUs Rcvd – InvalidDPC -Number of MSUs received and
MSINVDPC
discarded because the DPCcould not be found in the STProuting table.
peg countMSUs Discarded – InvalidLink- Number of MSUs discarded
MSINVLNK
because of an incorrect SLC. (TheSLC refers to a nonexistent linkor the same link.)
peg countMSUs Rcvd – Invalid ServiceIndicator Octet (SIO) -
MSINVSIO
Number of MSUs received anddiscarded because the servicerequested in the service indicatoroctet (SIO) was not supported bythe STP.
peg countMSUs Discarded – InvalidSLC- Number of MSUs discarded
MSINVSLC
because of an invalid SLC codein the ECO/COO.
peg countMSUs Discarded –InaccessibleDPC - The total
MSNACDPC
number of MSUs discardedbecause of an inaccessible DPC.
peg countMSUs Discarded – RoutingFailure - Number of MSUs
MSSCCPFL
discarded due to a routingfailure.
peg countMSUs Discarded –GatewayScreening -
MSUDSCRD
The total number of MSUs thatfailed gateway screening andhave been discarded.
peg countMSUs Discarded – Level2/Level 3 Queue Full -
MSULOST1
108E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
Number of MSUs discardedbecause the level 2 to level 3queue was full.
peg countMSUs Discarded –Route OnHold Buffer Overflow -
MSULOST2
Number of MSUs discardedbecause the routing buffer wasin overflow.
peg countMSUs Discarded –MSULOST3
1. LS On Hold BufferOverflow - The number ofMSUs discarded because thelinkset-on-hold buffer was inoverflow. The On HoldBuffer is used duringchangeover/changebacksituations to ensure thattraffic is sequenced correctly.During changeover andchangeback, MSUs that wereoriginally sent over linkswhich are now failed (notIS-NR) are buffered while thechangeover/changebackprocedures are carried out.Once those procedures arecompleted, the traffic in theon-hold buffer is routedbased on the currentconfiguration.
2. LSL LIM does not have SCCPassignment for receivedSCCP traffic.
3. HSL –
• All Class 1 (sequenced)GTT traffic addressed toEAGLE
• A Class 0 GTT messagefor EAGLE arrives whenthe SCCP TVG queue isfull
• A GTT message in theSCCP TVG queue is morethan 2 seconds old.
109E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
peg countMSUs Discarded – Rcv QueueFull -
MSULOST4
Number of MSUs discardedbecause the receive queue wasfull.
peg countNetwork Management TaskDiscard from Processor
NMTSKDSC0
Overload - The total number ofnetwork management tasks(messages) discarded because ofa processor overload (taskpriority = 0).
peg countNetwork Management TaskDiscard from Processor
NMTSKDSC1
Overload - The total number ofnetwork management tasks(messages) discarded because ofa processor overload (taskpriority = 1).
peg countNetwork Management TaskDiscard from Processor
NMTSKDSC2
Overload - The total number ofnetwork management tasks(messages) discarded because ofa processor overload (taskpriority = 2).
peg countNetwork Management TaskDiscard from Processor
NMTSKDSC3
Overload - The total number ofnetwork management tasks(messages) discarded because ofa processor overload (taskpriority = 3).
peg countMSUs Originated – InvalidDPC-
OMSINVDPC
Number of MSUs originatedwith an invalid DPC.
peg countOriginatedMSUs - The totalnumber of outgoing MSUs
ORIGMSUS
successfully passed to MTP level2 for transmission, whilecarrying the STP point code inthe OPC field.
110E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
octetsOriginateMSU Octets -ORMSUOCT
The total number of outgoingoctets associated with MSUscarrying the STP point code inthe OPC field. This includesoctets added in MTP level 2processing.
peg countOversizedMTP 3 Messages -Oversized MTP 3 messages
OVSZMSG
exceeding 272 octets (level 3) thatare received by an HSL and arediscarded.
statusIndication of Data Validity:STATUS
K indicates good dataI indicates incompleteintervalN indicates data not current
peg countThrough-SwitchedMSUs -THRSWMSU
The total number of MSUs thatdid not carry the STP point codein the OPC or the DPC, and weresuccessfully passed to MTP level2 for transmission.
peg countTerminatedMSUs - The totalnumber of incoming MSUs
TRMDMSUS
carrying the STP point code inthe DPC.
octetsTerminatedMSU Octets -TRMSUOCT
The total number of octetsassociated with incoming MSUscarrying the STP point code inthe DPC. Includes octetsremoved in MTP level 2processing.
octetsThrough-SwitchedMSU Octets-
TSMSUOCT
The total number of octetsassociated with MSUs that didnot carry the STP point code inthe OPC or the DPC, and were
111E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
successfully passed to MTP level2 for transmission
UI Example Output:
eagle10506 03-04-15 17:13:02 EST EAGLE 34.0.0 TYPE OF REPORT: NETWORK MANAGEMENT MEASUREMENTS ON STP REPORT PERIOD: LAST REPORT INTERVAL: 03-04-15, 17:05:00 THROUGH 17:09:59 STP-NM MEASUREMENTS These measurements are from 03-04-15, 17:05:00 through 17:09:59. ORIGMSUS = 80, TRMDMSUS = 80, THRSWMSU = 0, ORMSUOCT = 1540, TRMSUOCT = 1540, TSMSUOCT = 0, MSINVDPC = 0, MSINVSIO = 0, OMSINVDPC = 0, MSINVLNK = 0, GTTPERFD = 0, GTTUN0NS = 0, GTTUN1NT = 0, MSSCCPFL = 0, MSINVSIF = 0, MSNACDPC = 0, MSINVSLC = 0, MSUDSCRD = 0, MSULOST1 = 0, MSULOST2 = 0, MSULOST3 = 0, MSULOST4 = 0, NMTSKDSC0 = 0, NMTSKDSC1 = 0, NMTSKDSC2 = 0, NMTSKDSC3 = 0, OVSZMSG = 0; eagle10506 03-04-15 17:13:03 EST EAGLE 34.0.0 END OF ON-DEMAND STP-NM MEASUREMENT REPORT;
FTP Example output file name: nm-stp_19990117_1550.csv
FTP Example output file format:
"CLLI","SWREL","RPTDATE","RPTIME","TZ","RPTTYPE","RPTPD","IVALDATE","IVALSTART","IVALEND","NUMENTIDS"<cr><lf>"tekelecstp","34.0.0-39.1.0","1999-01-17","15:51:37","EST","NETWORK MANAGEMENT MEASUREMENTS ON STP","LAST","1999-01-17","15:45:00","15:50:00",1<cr><lf><cr><lf>"STATUS","ORIGMSUS","TRMDMSUS","THRSWMSU","ORMSUOCT","TRMSUOCT","TSMSUOCT","MSINVDPC","MSINVSIO","OMSINVDPC","MSINVLNK","GTTPERFD","GTTUN0NS","GTTUN1NT","MSSCCPFL","MSINVSIF","MSNACDPC","MSINVSLC","MSUDSCRD","MSULOST1","MSULOST2","MSULOST3","MSULOST4","NMTSKDSC0","NMTSKDSC1","NMTSKDSC2","NMTSKDSC3","OVSZMSG"<cr><lf>"K",80,80,0,1540,1540,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0<cr><lf>
Typical file size is:
Table 39: Typical File Size: nm-stp.csv
File Size=Report data+Reportheader+System
header
1042 bytes=477+315+250
112E86977 Revision 1, July 2017
ReportsMeasurements
LNKSET NM Report
Command Examples
• UI
rept-meas:type=nm:enttype=lnkset:lsn=xxxx
• FTP
rept-ftp-meas:type=nm:enttype=lnkset
Measurement Events
Table 40: Network Management Linkset Measurements
UnitDescriptionEvent Name
octetsMSU Octets Received - Totalnumber of octets associated with
MOCTRCVD
MSUs received, including thoseremoved and those for whichretransmission has beenrequested.
• For SAAL, IPVL, IPVHSL,and IPVLGW class linksets -applies to MTP level 3message bytes.
octetsMSU Octets Transmitted - Totalnumber of octets associated with
MOCTTRAN
MSUs transmitted to the far-end.For all linkset classes, thisincludes octets for MTP level 3SIO and SIF.
• For MTP2 class linksets,octets included are thoseassociated with MSUstransmitted ANDacknowledged by level 2, aswell as any retransmittedMSUs. Additional octetsincluded are MTP level 2 flag,BSN/BIB, FSN/BIB, LI, andCRC octets.
• For SAAL and IPVHSL classlinksets, octets are notincluded until the MSU isacknowledged by level 2.
113E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
• For IPVL and IPVLGW classlinksets, octets are notincluded until the MSU istransmitted by level 2. ForIPVLGW class linksets, SNMs(MSUs with SI=0) are NOTincluded.
peg countMSUs Transmitted - Totalnumber of MSUs transmitted to
MSGSTRAN
the far-end, includingretransmissions.
• For MTP2 class links, MSUstransmitted ANDacknowledged by level 2
• For SAAL, IPVL, IPVHSL,and IPVLGW class links,MTP level 3 messages offeredfor transmission after anyrequired conversion fromtheir respective M2PA,M3UA, or SUA formats
peg countMSUs Received - The totalnumber of MSUs received,
MSGSRCVD
including those for whichretransmission has beenrequested.
• For SAAL, IPVL, IPVHSL,and IPVLGW class linksets -applies to MTP level 3messages
statusIndication of Data Validity:STATUS
K indicates good dataI indicates incompleteintervalN indicates data not current
UI Reports
UI Example Output:
rept-meas:type=nm:enttype=lnkset:lsn=xxx
tekelecstp 12-02-20 17:36:25 EST EAGLE5 44.0.0 TYPE OF REPORT: NETWORK MANAGEMENT MEASUREMENTS ON LNKSET REPORT PERIOD: LAST REPORT INTERVAL: 12-02-20, 17:30:00 THROUGH 17:34:59
114E86977 Revision 1, July 2017
ReportsMeasurements
LNKSET-NM MEASUREMENTS: mtp2 (MTP2)
These measurements are from 12-02-20, 17:30:00 through 17:34:59. MOCTTRAN = 0, MOCTRCVD = 0, MSGSTRAN = 0, MSGSRCVD = 0
;
tekelecstp 12-02-20 17:37:16 EST EAGLE5 44.0.0 TYPE OF REPORT: NETWORK MANAGEMENT MEASUREMENTS ON LNKSET REPORT PERIOD: LAST REPORT INTERVAL: 12-02-20, 17:30:00 THROUGH 17:34:59
LNKSET-NM MEASUREMENTS: ipsg (IPVL)
These measurements are from 12-02-20, 17:30:00 through 17:34:59. MOCTTRAN = 0, MOCTRCVD = 0, MSGSTRAN = 0, MSGSRCVD = 0
;
tekelecstp 12-02-20 17:37:56 EST EAGLE5 44.0.0 TYPE OF REPORT: NETWORK MANAGEMENT MEASUREMENTS ON LNKSET REPORT PERIOD: LAST REPORT INTERVAL: 12-02-20, 17:30:00 THROUGH 17:34:59
LNKSET-NM MEASUREMENTS: saal (SAAL)
These measurements are from 12-02-20, 17:30:00 through 17:34:59. MOCTTRAN = 0, MOCTRCVD = 0, MSGSTRAN = 0, MSGSRCVD = 0
;
tekelecstp 12-02-20 17:38:14 EST EAGLE5 44.0.0 TYPE OF REPORT: NETWORK MANAGEMENT MEASUREMENTS ON LNKSET REPORT PERIOD: LAST REPORT INTERVAL: 12-02-20, 17:30:00 THROUGH 17:34:59
LNKSET-NM MEASUREMENTS: ssedcm2 (IPVL)
These measurements are from 12-02-20, 17:30:00 through 17:34:59. MOCTTRAN = 0, MOCTRCVD = 0, MSGSTRAN = 0, MSGSRCVD = 0
;
tekelecstp 12-02-20 17:38:32 EST EAGLE5 44.0.0 TYPE OF REPORT: NETWORK MANAGEMENT MEASUREMENTS ON LNKSET REPORT PERIOD: LAST REPORT INTERVAL: 12-02-20, 17:30:00 THROUGH 17:34:59
LNKSET-NM MEASUREMENTS: hcmimt1 (MTP2-UNCH)
These measurements are from 12-02-20, 17:30:00 through 17:34:59. MOCTTRAN = 0, MOCTRCVD = 0, MSGSTRAN = 0, MSGSRCVD = 0
;
115E86977 Revision 1, July 2017
ReportsMeasurements
FTP Reports
Table 41: FTP NM LNKSET Column Headers
DescriptionFieldName
Linksetname
LSN
Link typeLNKTYPE
FTP Example Output File Name:nm-lnkset_20201005_0215.csv
FTP Example Output File Format:
"CLLI","SWREL","RPTDATE","RPTIME","TZ","RPTTYPE","RPTPD","IVALDATE","IVALSTART","IVALEND","NUMENTIDS"<cr><lf>"tekelecstp","EAGLE5 44.0.0-64.23.0","2012-02-20","17:39:16","EST ","NETWORK MANAGEMENT MEASUREMENTS ON LNKSET","LAST","2012-02-20","17:30:00","17:35:00",6<cr><lf><cr><lf>"STATUS","LSN","LNKTYPE","MOCTTRAN","MOCTRCVD","MSGSTRAN","MSGSRCVD"<cr><lf>"K","mtp2","MTP2",0,0,0,0<cr><lf>"K","ipsg","IPVL",0,0,0,0<cr><lf>"K","m3uals","IPVL",0,0,0,0<cr><lf>"K","hcmimt1","MTP2-UNCH",0,0,0,0<cr><lf>"K","ssedcm2","IPVL",0,0,0,0<cr><lf>"K","saal","SAAL",0,0,0,0<cr><lf>
Assuming each data line will be:
4 char status + 13 char LSN + 12 char LNKTYPE + 4*(6 char data) + 2 = 55 chars
Table 42: Typical File Size: nm-lnkset.csv
File Size=Report data+Reportheader+System
header
27,821 bytes=27,500+71+250
LINK NM Report
Certain registers are reported for HSLs or LSLs only. Other registers have different interpretations forHSLs than for LSLs. These registers are summarized in Table 43: HSL LSL Differences for NetworkManagement Links.
Table 43: HSL LSL Differences for Network Management Links
HSL UsageLSL UsageEvent Name
N/A - Not reportedAs describedDRBSYLNK
N/A - Not reportedAs describedDRFEPRO
116E86977 Revision 1, July 2017
ReportsMeasurements
HSL UsageLSL UsageEvent Name
Initiated by
MAAL - REPORT_LOCAL_ PROCESSOR_OUTAGE
As describedDRLCLPRO
Command Examples
• UI
rept-meas:type=nm:enttype=link:loc=xxxx:link=x
rept-meas:type=nm:enttype=link:lsn=ls3
• FTP
rept-ftp-meas:type=nm:enttype=link
Measurement Events
Table 44: Network Management Link Measurements
UnitDescriptionEvent Name
secondsDuration of Far-End ProcessorOutage -
DRFEPRO
The cumulative duration that alink was unavailable to MTPlevel 3 because of a processoroutage at the far-end networkelement (SIPO received). Notreported for HSLs.
secondsCumulative Duration of BusyLink Status-
DRBSYLNK
The total elapsed time betweenthe receipt of a busy LSSU, andwhen the next message wasacknowledged. This is the sumof all occurrences of busy linkstatus. (MTP 2 links only.)
secondsDuration of Local ProcessorOutage - The cumulative
DRLCLPRO
duration that a link wasunavailable to MTP level 3because of a processor outage at
117E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
the near-end network element.For HSLs, this is initiated by
MAAL-REPORT_LOCAL_ PROCESSOR_OUTAGE
secondsDuration of Links Unavailable- The total time a link was
DRLNKUNV
unavailable to MTP level 3 forany reason.
peg countEvent Count for Entering Level1 Link Congestion - The total
ECCNGLV1
number of times that linkcongestion level 1 was entered.
peg countEvent Count for Entering Level2 Link Congestion - The total
ECCNGLV2
number of times that linkcongestion level 2 was entered.
peg countEvent Count for Entering Level3 Link Congestion - The total
ECCNGLV3
number of times that linkcongestion level 3 was entered.
peg countFor ANSI links: Priority 0 MSUsDiscarded Due to Congestion -
MSGDISC0
The total number of priority 0MSUs discarded due tocongestion (any level).
• For SAAL class links, appliesto MTP level 3 messages .
For ITU links: this register is notapplicable.
Note: The MSUs or Messagesmay be discarded on thetransmit/outbound link, whichindicates congestion via theECCNGLVLx or TDCNGLVxregisters or it may appear oninbound links routing traffic tothose congested links. The latterwill not indicate eitherECCNGLVLx or TDCNGLVx.
peg countFor ANSI links: Priority 1 MSUsDiscarded Due to Congestion -
MSGDISC1
The total number of priority 1
118E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
MSUs discarded due tocongestion (any level).
• For SAAL class links, appliesto MTP level 3 messages .
For ITU links: this register is notapplicable.
Note: The MSUs or Messagesmay be discarded on thetransmit/outbound link, whichindicates congestion via theECCNGLVLx or TDCNGLVxregisters or it may appear oninbound links routing traffic tothose congested links. The latterwill not indicate eitherECCNGLVLx or TDCNGLVx.
peg countFor ANSI links: Priority 2 MSUsDiscarded Due to Congestion -
MSGDISC2
The total number of priority 2MSUs discarded due tocongestion (any level).
• For SAAL class links, appliesto MTP level 3 messages .
For ITU links: this register is notapplicable.
Note: The MSUs or Messagesmay be discarded on thetransmit/outbound link, whichindicates congestion via theECCNGLVLx or TDCNGLVxregisters or it may appear oninbound links routing traffic tothose congested links. The latterwill not indicate eitherECCNGLVLx or TDCNGLVx.
peg countFor ANSI links: Priority 3 MSUsDiscarded Due to Congestion -
MSGDISC3
The total number of priority 3MSUs discarded due tocongestion (any level).
• For SAAL class links, appliesto MTP level 3 messages .
For ITU links: this register is notapplicable.
119E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
Note: The MSUs or Messagesmay be discarded on thetransmit/outbound link, whichindicates congestion via theECCNGLVLx or TDCNGLVxregisters or it may appear oninbound links routing traffic tothose congested links. The latterwill not indicate eitherECCNGLVLx or TDCNGLVx.
peg countNumber of Times GWSDisabled – The number of times
NMGWSDSABL
that the GWS subsystem on theLIM card supporting the linkwas disabled because of a receiveoverload condition on the card.When this occurs, the GWSsubsystem is disabled for alllinks on the card and this registeris pegged for all links on the cardregardless of whether GWS isenabled for that link. Gatewayscreening is disabled on the cardto allow recovery from thereceive overload condition andis re-enabled when the receiveoverload condition abates.
statusIndication of Data Validity:STATUS
K indicates good dataI indicates incompleteintervalN indicates data not current
secondsTotal Duration of Level 1 LinkCongestion - The total time thelink was in level 1 congestion.
TDCNGLV1
secondsTotal Duration of Level 2 LinkCongestion - The total time thelink was in level 2 congestion.
TDCNGLV2
secondsTotal Duration of Level 3 LinkCongestion - The total time thelink was in level 3 congestion.
TDCNGLV3
120E86977 Revision 1, July 2017
ReportsMeasurements
UI Reports
UI Example Output:
• rept-meas:type=nm:enttype=link:loc=xxxx:link=x
tekelecstp 12-02-20 17:18:12 EST EAGLE5 44.0.0 TYPE OF REPORT: NETWORK MANAGEMENT MEASUREMENTS ON LINK REPORT PERIOD: LAST REPORT INTERVAL: 12-02-20, 17:10:00 THROUGH 17:14:59
LINK-NM MEASUREMENTS: LOC: 1104, LINK: A , LSN: mtp2 (MTP2)
These measurements are from 12-02-20, 17:10:00 through 17:14:59. DRLNKUNV = 300, TDCNGLV1 = 0, TDCNGLV2 = 0, TDCNGLV3 = 0, ECCNGLV1 = 0, ECCNGLV2 = 0, ECCNGLV3 = 0, MSGDISC0 = 0, MSGDISC1 = 0, MSGDISC2 = 0, MSGDISC3 = 0, DRFEPRO = 0, DRBSYLNK = 0, NMGWSDSABL = 0, DRLCLPRO = 0
;
tekelecstp 12-03-21 00:35:08 EST EAGLE5 44.0.0 TYPE OF REPORT: NETWORK MANAGEMENT MEASUREMENTS ON LINK REPORT PERIOD: LAST REPORT INTERVAL: 12-03-21, 00:30:00 THROUGH 00:34:59
LINK-NM MEASUREMENTS: LOC: 1103, LINK: A , LSN: ipsg (IPVL)
These measurements are from 12-03-21, 00:30:00 through 00:34:59. DRLNKUNV = 300, TDCNGLV1 = 0, TDCNGLV2 = 0, TDCNGLV3 = 0, ECCNGLV1 = 0, ECCNGLV2 = 0, ECCNGLV3 = 0, MSGDISC0 = 0, MSGDISC1 = 0, MSGDISC2 = 0, MSGDISC3 = 0, NMGWSDSABL = 0, DRLCLPRO = 0
;
tekelecstp 12-03-21 00:36:02 EST EAGLE5 44.0.0 TYPE OF REPORT: NETWORK MANAGEMENT MEASUREMENTS ON LINK REPORT PERIOD: LAST REPORT INTERVAL: 12-03-21, 00:30:00 THROUGH 00:34:59
LINK-NM MEASUREMENTS: LOC: 1107, LINK: A , LSN: ssedcm2 (IPVLGW)
These measurements are from 12-03-21, 00:30:00 through 00:34:59. DRLNKUNV = 0, TDCNGLV1 = 0, TDCNGLV2 = 0, TDCNGLV3 = 0, ECCNGLV1 = 0, ECCNGLV2 = 0, ECCNGLV3 = 0, MSGDISC0 = 0, MSGDISC1 = 0, MSGDISC2 = 0, MSGDISC3 = 0, NMGWSDSABL = 0, DRLCLPRO = 0
;
tekelecstp 12-03-21 00:36:33 EST EAGLE5 44.0.0 TYPE OF REPORT: NETWORK MANAGEMENT MEASUREMENTS ON LINK REPORT PERIOD: LAST REPORT INTERVAL: 12-03-21, 00:30:00 THROUGH 00:34:59
LINK-NM MEASUREMENTS: LOC: 1112, LINK: A , LSN: saal (SAAL)
121E86977 Revision 1, July 2017
ReportsMeasurements
These measurements are from 12-03-21, 00:30:00 through 00:34:59. DRLNKUNV = 300, TDCNGLV1 = 0, TDCNGLV2 = 0, TDCNGLV3 = 0, ECCNGLV1 = 0, ECCNGLV2 = 0, ECCNGLV3 = 0, MSGDISC0 = 0, MSGDISC1 = 0, MSGDISC2 = 0, MSGDISC3 = 0, NMGWSDSABL = 0, DRLCLPRO = 0
;
tekelecstp 12-03-21 00:37:12 EST EAGLE5 44.0.0 TYPE OF REPORT: NETWORK MANAGEMENT MEASUREMENTS ON LINK REPORT PERIOD: LAST REPORT INTERVAL: 12-03-21, 00:30:00 THROUGH 00:34:59
LINK-NM MEASUREMENTS: LOC: 1203, LINK: A , LSN: hcmimt1 (MTP2-UNCH)
These measurements are from 12-03-21, 00:30:00 through 00:34:59. DRLNKUNV = 300, TDCNGLV1 = 0, TDCNGLV2 = 0, TDCNGLV3 = 0, ECCNGLV1 = 0, ECCNGLV2 = 0, ECCNGLV3 = 0, MSGDISC0 = 0, MSGDISC1 = 0, MSGDISC2 = 0, MSGDISC3 = 0, DRFEPRO = 0, DRBSYLNK = 0, NMGWSDSABL = 0, DRLCLPRO = 0
;
• rept-meas:type=nm:enttype=link:lsn=ls3
tekelecstp 12-02-20 17:28:02 EST EAGLE5 44.0.0 TYPE OF REPORT: NETWORK MANAGEMENT MEASUREMENTS ON LINK REPORT PERIOD: LAST REPORT INTERVAL: 12-02-20, 17:20:00 THROUGH 17:24:59
LINK-NM MEASUREMENTS FOR LINKSET mtp2:
LINK-NM MEASUREMENTS: LOC: 1104, LINK: A , LSN: mtp2 (MTP2)
These measurements are from 12-02-20, 17:20:00 through 17:24:59. DRLNKUNV = 300, TDCNGLV1 = 0, TDCNGLV2 = 0, TDCNGLV3 = 0, ECCNGLV1 = 0, ECCNGLV2 = 0, ECCNGLV3 = 0, MSGDISC0 = 0, MSGDISC1 = 0, MSGDISC2 = 0, MSGDISC3 = 0, DRFEPRO = 0, DRBSYLNK = 0, NMGWSDSABL = 0, DRLCLPRO = 0
;
tekelecstp 12-03-21 00:52:16 EST EAGLE5 44.0.0 TYPE OF REPORT: NETWORK MANAGEMENT MEASUREMENTS ON LINK REPORT PERIOD: LAST REPORT INTERVAL: 12-03-21, 00:45:00 THROUGH 00:49:59
LINK-NM MEASUREMENTS FOR LINKSET ipsg:
LINK-NM MEASUREMENTS: LOC: 1103, LINK: A , LSN: ipsg (IPVL)
These measurements are from 12-03-21, 00:45:00 through 00:49:59. DRLNKUNV = 300, TDCNGLV1 = 0, TDCNGLV2 = 0, TDCNGLV3 = 0, ECCNGLV1 = 0, ECCNGLV2 = 0, ECCNGLV3 = 0, MSGDISC0 = 0, MSGDISC1 = 0, MSGDISC2 = 0, MSGDISC3 = 0, NMGWSDSABL = 0, DRLCLPRO = 0
122E86977 Revision 1, July 2017
ReportsMeasurements
;
tekelecstp 12-03-21 00:52:58 EST EAGLE5 44.0.0 TYPE OF REPORT: NETWORK MANAGEMENT MEASUREMENTS ON LINK REPORT PERIOD: LAST REPORT INTERVAL: 12-03-21, 00:45:00 THROUGH 00:49:59
LINK-NM MEASUREMENTS FOR LINKSET saal:
LINK-NM MEASUREMENTS: LOC: 1112, LINK: A , LSN: saal (SAAL)
These measurements are from 12-03-21, 00:45:00 through 00:49:59. DRLNKUNV = 300, TDCNGLV1 = 0, TDCNGLV2 = 0, TDCNGLV3 = 0, ECCNGLV1 = 0, ECCNGLV2 = 0, ECCNGLV3 = 0, MSGDISC0 = 0, MSGDISC1 = 0, MSGDISC2 = 0, MSGDISC3 = 0, NMGWSDSABL = 0, DRLCLPRO = 0
;
tekelecstp 12-03-21 00:53:23 EST EAGLE5 44.0.0 TYPE OF REPORT: NETWORK MANAGEMENT MEASUREMENTS ON LINK REPORT PERIOD: LAST REPORT INTERVAL: 12-03-21, 00:45:00 THROUGH 00:49:59
LINK-NM MEASUREMENTS FOR LINKSET ssedcm2:
LINK-NM MEASUREMENTS: LOC: 1107, LINK: A , LSN: ssedcm2 (IPVLGW)
These measurements are from 12-03-21, 00:45:00 through 00:49:59. DRLNKUNV = 0, TDCNGLV1 = 0, TDCNGLV2 = 0, TDCNGLV3 = 0, ECCNGLV1 = 0, ECCNGLV2 = 0, ECCNGLV3 = 0, MSGDISC0 = 0, MSGDISC1 = 0, MSGDISC2 = 0, MSGDISC3 = 0, NMGWSDSABL = 0, DRLCLPRO = 0
;
tekelecstp 12-02-20 17:30:59 EST EAGLE5 44.0.0 TYPE OF REPORT: NETWORK MANAGEMENT MEASUREMENTS ON LINK REPORT PERIOD: LAST REPORT INTERVAL: 12-02-20, 17:25:00 THROUGH 17:29:59
LINK-NM MEASUREMENTS FOR LINKSET hcmimt1:
LINK-NM MEASUREMENTS: LOC: 1203, LINK: A , LSN: hcmimt1 (MTP2-UNCH)
These measurements are from 12-02-20, 17:25:00 through 17:29:59. DRLNKUNV = 300, TDCNGLV1 = 0, TDCNGLV2 = 0, TDCNGLV3 = 0, ECCNGLV1 = 0, ECCNGLV2 = 0, ECCNGLV3 = 0, MSGDISC0 = 0, MSGDISC1 = 0, MSGDISC2 = 0, MSGDISC3 = 0, DRFEPRO = 0, DRBSYLNK = 0, NMGWSDSABL = 0, DRLCLPRO = 0
;
123E86977 Revision 1, July 2017
ReportsMeasurements
FTP Reports
Table 45: FTP NM LINK Column Headers
DescriptionFieldName
Linksetname
LSN
Cardlocation
LOC
Link portLINK
Link typeLNKTYPE
FTP Example Output File Name: nm-link_20101001_0215.csv
FTP Example Output File Format:
"CLLI","SWREL","RPTDATE","RPTIME","TZ","RPTTYPE","RPTPD","IVALDATE","IVALSTART","IVALEND","NUMENTIDS"<cr><lf>"tekelecstp","EAGLE5 44.0.0-64.23.0","2012-02-20","17:31:43","EST ","NETWORK MANAGEMENT MEASUREMENTS ON LINK","LAST","2012-02-20","17:25:00","17:30:00",6<cr><lf><cr><lf>"STATUS","LSN","LOC","LINK","LNKTYPE","DRLNKUNV","TDCNGLV1","TDCNGLV2","TDCNGLV3","ECCNGLV1","ECCNGLV2","ECCNGLV3","MSGDISC0","MSGDISC1","MSGDISC2","MSGDISC3","DRFEPRO","DRBSYLNK","NMGWSDSABL","DRLCLPRO"<cr><lf>"K","hcmimt1","1203","A ","MTP2-UNCH",300,0,0,0,0,0,0,0,0,0,0,0,0,0,0<cr><lf>"K","ipsg","1103","A ","IPVL",300,0,0,0,0,0,0,0,0,0,0,0,0,0,0<cr><lf>"K","mtp2","1104","A ","MTP2",300,0,0,0,0,0,0,0,0,0,0,0,0,0,0<cr><lf>"K","m3uals","1105","A ","IPVLGW",300,0,0,0,0,0,0,0,0,0,0,0,0,0,0<cr><lf>"K","ssedcm2","1107","A ","IPVLGW",300,0,0,0,0,0,0,0,0,0,0,0,0,0,0<cr><lf>"K","saal","1112","A ","SAAL",300,0,0,0,0,0,0,0,0,0,0,0,0,0,0<cr><lf>
Assuming each data line will be:
4 char status + 13 char LSN + 7 char LOC + 5 char LINK + 12 char LNKTYPE + 15*(6 char data) + 2 =133 chars
Table 46: Typical File Size: nm-link.csv
File Size=Report data+Reportheader+
Systemheader
133,456 bytes=133,000+206+250
Daily Availability Measurements (AVLD)
Daily Availability (AVLD) Reports provide measurements pertaining to link management.
Entity Types: Link
124E86977 Revision 1, July 2017
ReportsMeasurements
Accumulation Interval: 24 hours
STP Retention Period: 24 hours
Reporting Mode: On-demand, scheduled (FTP reports only)
Accessible Collection Period: Last
LINK AVLD Report
Command Examples
• UI
rept-meas:type=avld:enttype=link:loc=xxxx:link=x:nzo=no
• FTP
rept-ftp-meas:type=avld:enttype=link
Measurement Events
Table 47: Availability Link Measurements
UnitDescriptionEvent Name
secondsCumulative Duration ofSignaling Link Declared
DRDCLFLR
Failures All Types - Thecumulative duration of all linkfailures.
secondsDuration of Far-End ProcessorOutage -
DRFEPRO
The cumulative duration that alink was unavailable to MTPlevel 3 because of a processoroutage at the far-end networkelement (SIPO received). Notreported for SAAL, IPVL classor IPVLGW class links.
secondsDuration of Local ProcessorOutage -
DRLCLPRO
The cumulative duration that alink was unavailable to MTPlevel 3 because of a processoroutage at the near-end networkelement.
secondsDuration of SignalingLinkMgmt Inhibit - The
DRLKINHB
125E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
duration that a signaling linkwas unavailable because asignaling link was inhibited. Notreported for IPVL, IPVLGW, orIPVHSL links.
peg countNumber of Far-EndManagement Inhibits - The total
FARMGINH
number of times that a link wasinhibited by far-endmanagement. Not reported forIPVL, IPVLGW, or IPVHSLlinks.
peg countNumber of SignalingLinkFailures – Abnormal
NDCLFLABN
FIB/BSN - Number of times thesignaling link was takenout-of-service because ofabnormal FIB/BSN received. Acount was accumulated if twobackward sequence numbervalues in three consecutivelyreceived MSUs or FISUs are notthe same as the previous one orany of the forward sequencenumbers of the signal units inthe retransmission buffer at thetime they are retransmitted.Reported for MTP2 Links only.Occurrences of this conditionwhile the link is not in-serviceare not accumulated in thisregister.
peg countLink Failure – Alignment orProving Failure - Number of
NDCLFALP
times a signaling link wasreturned to out-of-servicebecause of the excessive errorrate detected by the alignmenterror rate monitor (AERM). Notreported for SAAL class links.
peg countLink Failure – Too ManyInterrupts -
NDCLFINTR
The number of times a signalinglink was out-of-service because
126E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
an excessive number of linkinterrupts occurred.
peg countLink Failure - Loss ofSynchronization -
NDCLFSYNC
Number of times that the linkwas taken out-of-service becauseof a loss of synchronization.
peg countNumber of Signaling LinkFailures – Excessive Delay of
NDCFLXDA
Acknowledgment - The numberof times a signaling link wasout-of-service due to anexcessive delay inacknowledgments. For SAALand IPVHSL class links, timerNO_RESPONSE expired forPOLL/STAT response. Notreported for IPVL and IPVLGWclass links.
peg countNumber of Signaling LinkFailures - Excessive Duration of
NDCFLXDC
Congestion - The number oftimes a signaling link wasout-of-service because the timerT6 (remote congestion) expired.
• For SAAL and IPVHSL classlinks, timer NO_CREDITexpired for POLL/STATresponse.
• Not reported for IPVL andIPVLGW class links.
peg countNumber of Signaling LinkFailures – Excessive Error Rate
NDCFLXER
- Number of times a signalinglink was out-of-service becauseit reached the signal unit errorrate monitor (SUERM) threshold.
peg countNumber of Near-EndManagement Inhibits - Number
NEARMGIH
of times a link was unavailableto MTP level 3 because it waslocally inhibited. Not reportedfor IPVL, IPVLGW, or IPVHSLlinks.
127E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
peg countNumber of Signaling LinkDeclared Failures All Types -
NMDCLFLR
The cumulative total of all linkfailures.
peg countNumber of Far-End ProcessorOutages -
NMFEPRO
The total number of far-endprocessor outages. Reported forMTP2 links only.
peg countNumber of Local ProcessorOutages - The total number oflocal processor outages.
NMLCLPRO
peg countPCR N1 or N2 Count Exceeded- The total number of forced
PCRN1N2EXC
retransmissions when preventivecyclic retransmission (PCR) isused as the error correctionmethod on a link. Reported forMTP2 links only.
statusIndication of Data Validity:STATUS
K indicates good dataI indicates incompleteintervalN indicates data not current
peg countNumber of SUs Received inError - SUs received with
SURCVERR
checksum errors, indicatingtransmission errors. (For MTP2class links, applies to FISUs,LSSUs and MSUs. For SAALclass links and ATM HSLs, thisregister reflects the number ofSSCOP PDUs received witherrors).
peg countSignaling Units Received - Thetotal number of signaling units
SUSRECVD
received. (For ATM HSLs thisregister reflects the number ofSSCOP PDUs received).
peg countSignaling Units Transmitted -The total number of signaling
SUSTRAN
units transmitted. (For ATM
128E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
HSLs this register reflects thenumber of SSCOP PDUstransmitted.)
UI Reports
Example Output:
• rept-meas:type=avldth:enttype=link:loc=xxxx:link=x:nzo=no
tekelecstp 12-02-21 00:11:11 EST EAGLE5 44.0.0 TYPE OF REPORT: DAILY AVAILABILITY MEASUREMENTS ON LINK REPORT PERIOD: LAST REPORT INTERVAL: 12-02-20, 00:00:00 THROUGH 23:59:59
LINK-AVLD MEASUREMENTS: LOC: 1104, LINK: A , LSN: mtp2 (MTP2)
These measurements are from 12-02-20, 00:00:00 through 23:59:59. Measurement data represents an incomplete interval. NEARMGIH = 0, FARMGINH = 0, NMDCLFLR = 0, DRDCLFLR = 0, SURCVERR = 0, DRLKINHB = 0, DRFEPRO = 0, DRLCLPRO = 0
;
tekelecstp 12-02-21 00:11:30 EST EAGLE5 44.0.0 TYPE OF REPORT: DAILY AVAILABILITY MEASUREMENTS ON LINK REPORT PERIOD: LAST REPORT INTERVAL: 12-02-20, 00:00:00 THROUGH 23:59:59
LINK-AVLD MEASUREMENTS: LOC: 1103, LINK: A , LSN: ipsg (IPVL)
These measurements are from 12-02-20, 00:00:00 through 23:59:59. Measurement data represents an incomplete interval. NEARMGIH = 0, FARMGINH = 0, NMDCLFLR = 0, DRDCLFLR = 0, SURCVERR = 0, DRLKINHB = 0, DRFEPRO = 0, DRLCLPRO = 0
;
tekelecstp 12-02-21 00:11:46 EST EAGLE5 44.0.0 TYPE OF REPORT: DAILY AVAILABILITY MEASUREMENTS ON LINK REPORT PERIOD: LAST REPORT INTERVAL: 12-02-20, 00:00:00 THROUGH 23:59:59
LINK-AVLD MEASUREMENTS: LOC: 1105, LINK: A , LSN: m3uals (IPVLGW)
These measurements are from 12-02-20, 00:00:00 through 23:59:59. Measurement data represents an incomplete interval. NMDCLFLR = 0, DRDCLFLR = 0, DRLCLPRO = 0
;
tekelecstp 12-02-21 00:12:02 EST EAGLE5 44.0.0 TYPE OF REPORT: DAILY AVAILABILITY MEASUREMENTS ON LINK REPORT PERIOD: LAST
129E86977 Revision 1, July 2017
ReportsMeasurements
REPORT INTERVAL: 12-02-20, 00:00:00 THROUGH 23:59:59
LINK-AVLD MEASUREMENTS: LOC: 1112, LINK: A , LSN: saal (SAAL)
These measurements are from 12-02-20, 00:00:00 through 23:59:59. Measurement data represents an incomplete interval. NMDCLFLR = 0, DRDCLFLR = 0, DRLCLPRO = 0
;
tekelecstp 12-02-21 00:12:19 EST EAGLE5 44.0.0 TYPE OF REPORT: DAILY AVAILABILITY MEASUREMENTS ON LINK REPORT PERIOD: LAST REPORT INTERVAL: 12-02-20, 00:00:00 THROUGH 23:59:59
LINK-AVLD MEASUREMENTS: LOC: 1107, LINK: A , LSN: ssedcm2 (IPVLGW)
These measurements are from 12-02-20, 00:00:00 through 23:59:59. Measurement data represents an incomplete interval. NEARMGIH = 0, FARMGINH = 0, NMDCLFLR = 0, DRDCLFLR = 0, SURCVERR = 0, DRLKINHB = 0, DRLCLPRO = 0
;
tekelecstp 12-02-21 00:12:32 EST EAGLE5 44.0.0 TYPE OF REPORT: DAILY AVAILABILITY MEASUREMENTS ON LINK REPORT PERIOD: LAST REPORT INTERVAL: 12-02-20, 00:00:00 THROUGH 23:59:59
LINK-AVLD MEASUREMENTS: LOC: 1203, LINK: A , LSN: hcmimt1 (MTP2-UNCH)
These measurements are from 12-02-20, 00:00:00 through 23:59:59. Measurement data represents an incomplete interval. NMDCLFLR = 0, DRDCLFLR = 0, DRLCLPRO = 0
;
• rept-meas:type=avl:enttype=link:lsn=ls3
tekelecstp 12-02-20 17:49:42 EST EAGLE5 44.0.0 TYPE OF REPORT: AVAILABILITY MEASUREMENTS ON LINK REPORT PERIOD: LAST REPORT INTERVAL: 12-02-20, 17:00:00 THROUGH 17:29:59
LINK-AVL MEASUREMENTS FOR LINKSET mtp2:
LINK-AVL MEASUREMENTS: LOC: 1104, LINK: A , LSN: mtp2 (MTP2)
These measurements are from 12-02-20, 17:00:00 through 17:29:59. NEARMGIH = 0, FARMGINH = 0, NMDCLFLR = 0, DRDCLFLR = 0, SURCVERR = 0, DRLKINHB = 0, NDCFLABN = 0, NDCLFSYNC = 0, NDCFLXDA = 0, NDCFLXER = 0, NDCFLXDC = 0, NDCLFALP = 146, NDCLFINTR = 0, NMFEPRO = 0, NMLCLPRO = 0, DRFEPRO = 0, DRLCLPRO = 0, SUSRECVD = 0, SUSTRAN = 1504478, PCRN1N2EXC = 0
;
130E86977 Revision 1, July 2017
ReportsMeasurements
tekelecstp 12-03-21 01:27:03 EST EAGLE5 44.0.0 TYPE OF REPORT: AVAILABILITY MEASUREMENTS ON LINK REPORT PERIOD: LAST REPORT INTERVAL: 12-03-21, 00:30:00 THROUGH 00:59:59
LINK-AVL MEASUREMENTS FOR LINKSET ipsg:
LINK-AVL MEASUREMENTS: LOC: 1103, LINK: A , LSN: ipsg (IPVL)
These measurements are from 12-03-21, 00:30:00 through 00:59:59. NMDCLFLR = 0, DRDCLFLR = 0, NDCLFSYNC = 0, NDCLFALP = 0, NDCLFINTR = 0, NMLCLPRO = 0, DRLCLPRO = 0, SUSRECVD = 0, SUSTRAN = 0
;
tekelecstp 12-03-21 01:28:18 EST EAGLE5 44.0.0 TYPE OF REPORT: AVAILABILITY MEASUREMENTS ON LINK REPORT PERIOD: LAST REPORT INTERVAL: 12-03-21, 00:30:00 THROUGH 00:59:59
LINK-AVL MEASUREMENTS FOR LINKSET saal:
LINK-AVL MEASUREMENTS: LOC: 1112, LINK: A , LSN: saal (SAAL)
These measurements are from 12-03-21, 00:30:00 through 00:59:59. NEARMGIH = 0, FARMGINH = 0, NMDCLFLR = 0, DRDCLFLR = 0, SURCVERR = 0, DRLKINHB = 0, NDCLFSYNC = 15, NDCFLXDA = 0, NDCFLXER = 0, NDCFLXDC = 0, NDCLFINTR = 0, NMLCLPRO = 0, DRLCLPRO = 0, SUSRECVD = 0, SUSTRAN = 1560
;
tekelecstp 12-03-21 01:28:44 EST EAGLE5 44.0.0 TYPE OF REPORT: AVAILABILITY MEASUREMENTS ON LINK REPORT PERIOD: LAST REPORT INTERVAL: 12-03-21, 00:30:00 THROUGH 00:59:59
LINK-AVL MEASUREMENTS FOR LINKSET ssedcm2:
LINK-AVL MEASUREMENTS: LOC: 1107, LINK: A , LSN: ssedcm2 (IPVLGW)
These measurements are from 12-03-21, 00:30:00 through 00:59:59. NMDCLFLR = 0, DRDCLFLR = 0, NDCLFSYNC = 0, NDCLFALP = 0, NDCLFINTR = 0, NMLCLPRO = 0, DRLCLPRO = 0, SUSRECVD = 0, SUSTRAN = 0
;
tekelecstp 12-03-21 01:29:09 EST EAGLE5 44.0.0 TYPE OF REPORT: AVAILABILITY MEASUREMENTS ON LINK REPORT PERIOD: LAST REPORT INTERVAL: 12-03-21, 00:30:00 THROUGH 00:59:59
LINK-AVL MEASUREMENTS FOR LINKSET hcmimt1:
LINK-AVL MEASUREMENTS: LOC: 1203, LINK: A , LSN: hcmimt1 (MTP2-UNCH)
These measurements are from 12-03-21, 00:30:00 through 00:59:59. NEARMGIH = 0, FARMGINH = 0, NMDCLFLR = 0,
131E86977 Revision 1, July 2017
ReportsMeasurements
DRDCLFLR = 0, SURCVERR = 0, DRLKINHB = 0, NDCFLABN = 0, NDCLFSYNC = 0, NDCFLXDA = 0, NDCFLXER = 0, NDCFLXDC = 0, NDCLFALP = 0, NDCLFINTR = 0, NMFEPRO = 0, NMLCLPRO = 0, DRFEPRO = 0, DRLCLPRO = 0, SUSRECVD = 1797679, SUSTRAN = 1797679, PCRN1N2EXC = 0
;
FTP Reports
Table 48: FTP AVLD LINK Command Headers
DescriptionFieldName
Linksetname
LSN
Cardlocation
LOC
Link portLINK
Link typeLNKTYPE
FTP Example Output File Name: avld-link_20101004_2400.csv
Example output file format:
"CLLI","SWREL","RPTDATE","RPTIME","TZ","RPTTYPE","RPTPD","IVALDATE","IVALSTART","IVALEND","NUMENTIDS"<cr><lf>"tekelecstp","EAGLE5 44.0.0-64.23.0","2012-02-21","00:17:33","EST ","DAILY AVAILABILITY MEASUREMENTS ON LINK","LAST","2012-02-20","00:00:00","24:00:00",6<cr><lf><cr><lf>"STATUS","LSN","LOC","LINK","LNKTYPE","NEARMGIH","FARMGINH","NMDCLFLR","DRDCLFLR","SURCVERR","DRLKINHB","DRFEPRO","DRLCLPRO"<cr><lf>"K","hcmimt1","1203","A ","MTP2-UNCH",0,0,0,0,0,0,0,0<cr><lf>"K","ipsg","1103","A ","IPVL",0,0,0,0,0,0,0,0<cr><lf>"K","mtp2","1104","A ","MTP2",0,0,0,0,0,0,0,0<cr><lf>"K","m3uals","1105","A ","IPVLGW",0,0,0,0,0,0,0,0<cr><lf>"K","ssedcm2","1107","A ","IPVLGW",0,0,0,0,0,0,0,0<cr><lf>"K","saal","1112","A ","SAAL",0,0,0,0,0,0,0,0<cr><lf>
Assuming each data line will be:
4 char status + 13 char LSN + 7 char LOC + 5 char LINK + 12 char LNKTYPE + 8*(6 char data) + 2 =91 chars
Table 49: Typical File Size: avld-link.csv
File Size=Report data+Reportheader+System
header
91,377 bytes=91,000+127+250
132E86977 Revision 1, July 2017
ReportsMeasurements
Day-To-Hour Availability Measurements (AVLDTH)
Day-To-Hour Availability (AVLDTH) Reports provide measurements pertaining to link managementaccumulating through the day.
Entity Types: Link
Accumulation Interval: Daily total to the last full hour
STP Retention Period: 1 hour
Reporting Mode: On-demand
Accessible Collection Period: Last
LINK AVLDTH Report
Command Examples
• UI
rept-meas:type=avldth:enttype=link:loc=xxxx:link=x:nzo=no
• FTP
rept-ftp-meas:type=avldth:enttype=link
Measurement Events
Table 50: Availability Link Measurements
UnitDescriptionEvent Name
secondsCumulative Duration ofSignaling Link Declared
DRDCLFLR
Failures All Types - Thecumulative duration of all linkfailures.
secondsDuration of Far-End ProcessorOutage -
DRFEPRO
The cumulative duration that alink was unavailable to MTPlevel 3 because of a processoroutage at the far-end networkelement (SIPO received). Notreported for SAAL, IPVL classor IPVLGW class links.
secondsDuration of Local ProcessorOutage -
DRLCLPRO
133E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
The cumulative duration that alink was unavailable to MTPlevel 3 because of a processoroutage at the near-end networkelement.
secondsDuration of SignalingLinkMgmt Inhibit - The
DRLKINHB
duration that a signaling linkwas unavailable because asignaling link was inhibited. Notreported for IPVL, IPVLGW, orIPVHSL links.
peg countNumber of Far-EndManagement Inhibits - The total
FARMGINH
number of times that a link wasinhibited by far-endmanagement. Not reported forIPVL, IPVLGW, or IPVHSLlinks.
peg countNumber of SignalingLinkFailures – Abnormal
NDCLFLABN
FIB/BSN - Number of times thesignaling link was takenout-of-service because ofabnormal FIB/BSN received. Acount was accumulated if twobackward sequence numbervalues in three consecutivelyreceived MSUs or FISUs are notthe same as the previous one orany of the forward sequencenumbers of the signal units inthe retransmission buffer at thetime they are retransmitted.Reported for MTP2 Links only.Occurrences of this conditionwhile the link is not in-serviceare not accumulated in thisregister.
peg countLink Failure – Alignment orProving Failure - Number of
NDCLFALP
times a signaling link wasreturned to out-of-servicebecause of the excessive errorrate detected by the alignment
134E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
error rate monitor (AERM). Notreported for SAAL class links.
peg countLink Failure – Too ManyInterrupts -
NDCLFINTR
The number of times a signalinglink was out-of-service becausean excessive number of linkinterrupts occurred.
peg countLink Failure - Loss ofSynchronization -
NDCLFSYNC
Number of times that the linkwas taken out-of-service becauseof a loss of synchronization.
peg countNumber of Signaling LinkFailures – Excessive Delay of
NDCFLXDA
Acknowledgment - The numberof times a signaling link wasout-of-service due to anexcessive delay inacknowledgments. For SAALand IPVHSL class links, timerNO_RESPONSE expired forPOLL/STAT response. Notreported for IPVL and IPVLGWclass links.
peg countNumber of Signaling LinkFailures - Excessive Duration of
NDCFLXDC
Congestion - The number oftimes a signaling link wasout-of-service because the timerT6 (remote congestion) expired.
• For SAAL and IPVHSL classlinks, timer NO_CREDITexpired for POLL/STATresponse.
• Not reported for IPVL andIPVLGW class links.
peg countNumber of Signaling LinkFailures – Excessive Error Rate
NDCFLXER
- Number of times a signalinglink was out-of-service becauseit reached the signal unit errorrate monitor (SUERM) threshold.
135E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
peg countNumber of Near-EndManagement Inhibits - Number
NEARMGIH
of times a link was unavailableto MTP level 3 because it waslocally inhibited. Not reportedfor IPVL, IPVLGW, or IPVHSLlinks.
peg countNumber of Signaling LinkDeclared Failures All Types -
NMDCLFLR
The cumulative total of all linkfailures.
peg countNumber of Far-End ProcessorOutages -
NMFEPRO
The total number of far-endprocessor outages. Reported forMTP2 links only.
peg countNumber of Local ProcessorOutages - The total number oflocal processor outages.
NMLCLPRO
peg countPCR N1 or N2 Count Exceeded- The total number of forced
PCRN1N2EXC
retransmissions when preventivecyclic retransmission (PCR) isused as the error correctionmethod on a link. Reported forMTP2 links only.
statusIndication of Data Validity:STATUS
K indicates good dataI indicates incompleteintervalN indicates data not current
peg countSignaling Units Received - Thetotal number of signaling units
SUSRECVD
received. (For ATM HSLs thisregister reflects the number ofSSCOP PDUs received.)
peg countSignaling Units Transmitted -The total number of signaling
SUSTRAN
units transmitted. (For ATMHSLs this register reflects thenumber of SSCOP PDUstransmitted.)
136E86977 Revision 1, July 2017
ReportsMeasurements
UI Reports
Example output:
• rept-meas:type=avldth:enttype=link:loc=xxxx:link=x:nzo=no
tekelecstp 12-02-21 00:11:11 EST EAGLE5 44.0.0 TYPE OF REPORT: DAILY AVAILABILITY MEASUREMENTS ON LINK REPORT PERIOD: LAST REPORT INTERVAL: 12-02-20, 00:00:00 THROUGH 23:59:59
LINK-AVLD MEASUREMENTS: LOC: 1104, LINK: A , LSN: mtp2 (MTP2)
These measurements are from 12-02-20, 00:00:00 through 23:59:59. NEARMGIH = 0, FARMGINH = 0, NMDCLFLR = 0, DRDCLFLR = 0, SURCVERR = 0, DRLKINHB = 0, DRFEPRO = 0, DRLCLPRO = 0
;
tekelecstp 12-03-21 01:34:26 EST EAGLE5 44.0.0 TYPE OF REPORT: DAILY AVAILABILITY MEASUREMENTS ON LINK REPORT PERIOD: LAST REPORT INTERVAL: 12-03-20, 00:00:00 THROUGH 23:59:59
LINK-AVLD MEASUREMENTS: LOC: 1103, LINK: A , LSN: ipsg (IPVL)
These measurements are from 12-03-20, 00:00:00 through 23:59:59. NMDCLFLR = 0, DRDCLFLR = 0, DRLCLPRO = 0
;
tekelecstp 12-03-21 01:35:22 EST EAGLE5 44.0.0 TYPE OF REPORT: DAILY AVAILABILITY MEASUREMENTS ON LINK REPORT PERIOD: LAST REPORT INTERVAL: 12-03-20, 00:00:00 THROUGH 23:59:59
LINK-AVLD MEASUREMENTS: LOC: 1112, LINK: A , LSN: saal (SAAL)
These measurements are from 12-03-20, 00:00:00 through 23:59:59. NEARMGIH = 0, FARMGINH = 0, NMDCLFLR = 0, DRDCLFLR = 0, SURCVERR = 0, DRLKINHB = 0, DRLCLPRO = 0
;
tekelecstp 12-03-21 01:35:48 EST EAGLE5 44.0.0 TYPE OF REPORT: DAILY AVAILABILITY MEASUREMENTS ON LINK REPORT PERIOD: LAST REPORT INTERVAL: 12-03-20, 00:00:00 THROUGH 23:59:59
LINK-AVLD MEASUREMENTS: LOC: 1107, LINK: A , LSN: ssedcm2 (IPVLGW)
These measurements are from 12-03-20, 00:00:00 through 23:59:59. NMDCLFLR = 0, DRDCLFLR = 0, DRLCLPRO = 0
;
tekelecstp 12-03-12 13:14:15 EST EAGLE5 44.0.0
137E86977 Revision 1, July 2017
ReportsMeasurements
TYPE OF REPORT: DAY-TO-HOUR AVAILABILITY MEASUREMENTS ON LINK REPORT PERIOD: LAST REPORT INTERVAL: 12-03-12, 00:00:00 THROUGH 12:59:59
LINK-AVLDTH MEASUREMENTS: LOC: 1203, LINK: A , LSN: hcmimt1 (MTP2-UNCH)
These measurements are from 12-03-12, 00:00:00 through 12:59:59. NEARMGIH = 0, FARMGINH = 0, NMDCLFLR = 0, DRDCLFLR = 0, SURCVERR = 0, DRLKINHB = 0, DRFEPRO = 0, DRLCLPRO = 0
;
• rept-meas:type=avldth:enttype=link:lsn=xxxx
tekelecstp 12-02-21 00:14:55 EST EAGLE5 44.0.0 TYPE OF REPORT: DAILY AVAILABILITY MEASUREMENTS ON LINK REPORT PERIOD: LAST REPORT INTERVAL: 12-02-20, 00:00:00 THROUGH 23:59:59
LINK-AVLD MEASUREMENTS FOR LINKSET mtp2:
LINK-AVLD MEASUREMENTS: LOC: 1104, LINK: A , LSN: mtp2 (MTP2)
These measurements are from 12-02-20, 00:00:00 through 23:59:59. Measurement data represents an incomplete interval. NEARMGIH = 0, FARMGINH = 0, NMDCLFLR = 0, DRDCLFLR = 0, SURCVERR = 0, DRLKINHB = 0, DRFEPRO = 0, DRLCLPRO = 0
;
tekelecstp 12-03-21 01:36:45 EST EAGLE5 44.0.0 TYPE OF REPORT: DAILY AVAILABILITY MEASUREMENTS ON LINK REPORT PERIOD: LAST REPORT INTERVAL: 12-03-20, 00:00:00 THROUGH 23:59:59
LINK-AVLD MEASUREMENTS FOR LINKSET ipsg:
LINK-AVLD MEASUREMENTS: LOC: 1103, LINK: A , LSN: ipsg (IPVL)
These measurements are from 12-03-20, 00:00:00 through 23:59:59. NMDCLFLR = 0, DRDCLFLR = 0, DRLCLPRO = 0
;
tekelecstp 12-03-21 01:37:12 EST EAGLE5 44.0.0 TYPE OF REPORT: DAILY AVAILABILITY MEASUREMENTS ON LINK REPORT PERIOD: LAST REPORT INTERVAL: 12-03-20, 00:00:00 THROUGH 23:59:59
LINK-AVLD MEASUREMENTS FOR LINKSET saal:
LINK-AVLD MEASUREMENTS: LOC: 1112, LINK: A , LSN: saal (SAAL)
These measurements are from 12-03-20, 00:00:00 through 23:59:59. NEARMGIH = 0, FARMGINH = 0, NMDCLFLR = 0, DRDCLFLR = 0, SURCVERR = 0, DRLKINHB = 0, DRLCLPRO = 0
138E86977 Revision 1, July 2017
ReportsMeasurements
;
tekelecstp 12-03-21 01:37:34 EST EAGLE5 44.0.0 TYPE OF REPORT: DAILY AVAILABILITY MEASUREMENTS ON LINK REPORT PERIOD: LAST REPORT INTERVAL: 12-03-20, 00:00:00 THROUGH 23:59:59
LINK-AVLD MEASUREMENTS FOR LINKSET ssedcm2:
LINK-AVLD MEASUREMENTS: LOC: 1107, LINK: A , LSN: ssedcm2 (IPVLGW)
These measurements are from 12-03-20, 00:00:00 through 23:59:59. NMDCLFLR = 0, DRDCLFLR = 0, DRLCLPRO = 0
;
tekelecstp 12-03-12 13:13:26 EST EAGLE5 44.0.0 TYPE OF REPORT: DAILY AVAILABILITY MEASUREMENTS ON LINK REPORT PERIOD: LAST REPORT INTERVAL: 12-03-11, 00:00:00 THROUGH 23:59:59
LINK-AVLD MEASUREMENTS FOR LINKSET hcmimt1:
LINK-AVLD MEASUREMENTS: LOC: 1203, LINK: A , LSN: hcmimt1 (MTP2-UNCH)
These measurements are from 12-03-11, 00:00:00 through 23:59:59. NEARMGIH = 0, FARMGINH = 0, NMDCLFLR = 0, DRDCLFLR = 0, SURCVERR = 0, DRLKINHB = 0, DRFEPRO = 0, DRLCLPRO = 0
;
FTP Reports
Table 51: FTP AVLDTH LINK Command Headers
DescriptionFieldName
Linksetname
LSN
Cardlocation
LOC
Link portLINK
Link typeLNKTYPE
FTP Example Output File Name:avldth-link_20101004_2400.csv
FTP Example Output File Format:
"CLLI","SWREL","RPTDATE","RPTIME","TZ","RPTTYPE","RPTPD","IVALDATE","IVALSTART","IVALEND","NUMENTIDS"<cr><lf>"tekelecstp","EAGLE5 44.0.0-64.23.0","2012-02-21","00:17:33","EST ","DAILY
139E86977 Revision 1, July 2017
ReportsMeasurements
AVAILABILITY MEASUREMENTS ON LINK","LAST","2012-02-20","00:00:00","24:00:00",6<cr><lf><cr><lf>"STATUS","LSN","LOC","LINK","LNKTYPE","NEARMGIH","FARMGINH","NMDCLFLR","DRDCLFLR","SURCVERR","DRLKINHB","DRFEPRO","DRLCLPRO"<cr><lf>"K","hcmimt1","1203","A ","MTP2-UNCH",0,0,0,0,0,0,0,0<cr><lf>"K","ipsg","1103","A ","IPVL",0,0,0,0,0,0,0,0<cr><lf>"K","mtp2","1104","A ","MTP2",0,0,0,0,0,0,0,0<cr><lf>"K","m3uals","1105","A ","IPVLGW",0,0,0,0,0,0,0,0<cr><lf>"K","ssedcm2","1107","A ","IPVLGW",0,0,0,0,0,0,0,0<cr><lf>"K","saal","1112","A ","SAAL",0,0,0,0,0,0,0,0<cr><lf>
Assuming each data line will be:
4 char status + 13 char LSN + 7 char LOC + 5 char LINK + 12 char LNKTYPE + 8*(6 char data) + 2 =91 chars
Table 52: Typical File Size: avldth-link.csv
File Size=Report data+Reportheader+System
header
91,377 bytes=91,000+127+250
Availability Measurements (AVL)
Availability Measurements (AVL) provide measurements relating to the availability of signaling links.
Entity Types: Link, STPLAN
Accumulation Interval: 30 minutes
Optional Accumulation Interval: Every 15 minutes
STP Retention Period: 24 hours
Reporting Mode: On-demand, scheduled (FTP reports)
Accessible Collection Period: Last, active, specific, or all
LINK AVL Report
Certain registers are reported for HSLs or LSLs only. Other registers have different interpretations forHSLs than for LSLs. These registers are summarized in Table 53: Availability Link Register Usage ByLINK Class.
Table 53: Availability Link Register Usage By LINK Class
IPVHSL UsageIPVL andIPVLGW UsageSAAL UsageMTP2 UsageEvent Name
As describedN/A - notreported
N/A - notreported
As describedDRFEPRO
140E86977 Revision 1, July 2017
ReportsMeasurements
IPVHSL UsageIPVL andIPVLGW UsageSAAL UsageMTP2 UsageEvent Name
As describedN/A - notreported
As describedAs describedDRLKINHB
As describedN/A - notreported
As describedAs describedFARMGINH
N/A - notreported
N/A - notreported
N/A - notreported
As describedNDCFLABN
Level 2 timer t7expired
Level 2 timer t7expired
TimerNO_RESPONSEexpired for
Level 2 timer t7expired
NDCFLXDA
POLL/STATresponse
Level 2 timer t6expired
Level 2 timer t6expired
TimerNO_CREDITexpired
Level 2 timer t6expired
NDCFLXDC
As describedAs describedN/A - notreported
As describedNDCLFALP
No data receivedon the line
No data receivedon the line
DS1: LOS, LOF, orLCD indications
No data receivedon the line
NDCLFSYNC
As describedN/A - notreported
As describedAs describedNEARMGIH
As describedAs describedN/A - notreported
As describedNMFEPRO
N/A - notreported
N/A - notreported
N/A - notreported
As describedPCRN1N2EXC
N/A - notreported
N/A - notreported
SSCOPPDUs (alltypes) receivedwith errors
Level 2 signalingunits (all types)received witherrors
SURCVERR
Level 2 signalingunits (all types)received
Level 2 signalingunits (all types)received
SSCOPPDUs (alltypes) received
Level 2 signalingunits (all types)received
SUSRECVD
Level 2 signalingunits (all types)transmitted
Level 2 signalingunits (all types)transmitted
SSCOPPDUs (alltypes) transmitted
Level 2 signalingunits (all types)transmitted
SUSTRAN
Command Examples
• UI
141E86977 Revision 1, July 2017
ReportsMeasurements
rept-meas:type=avl:enttype=link:loc=xxxx:link=x
• FTP
rept-ftp-meas:type=avl:enttype=link
Measurement Events
Table 54: Availability Link Measurements
UnitDescriptionEvent Name
secondsCumulative Duration ofSignaling Link Declared
DRDCLFLR
Failures All Types - Thecumulative duration of all linkfailures.
secondsDuration of Far-End ProcessorOutage -
DRFEPRO
The cumulative duration that alink was unavailable to MTPlevel 3 because of a processoroutage at the far-end networkelement (SIPO received). Notreported for SAAL, IPVL classor IPVLGW class links.
secondsDuration of Local ProcessorOutage -
DRLCLPRO
The cumulative duration that alink was unavailable to MTPlevel 3 because of a processoroutage at the near-end networkelement.
secondsDuration of SignalingLinkMgmt Inhibit - The
DRLKINHB
duration that a signaling linkwas unavailable because asignaling link was inhibited. Notreported for IPVL, IPVLGW, orIPVHSL links.
peg countNumber of Far-EndManagement Inhibits - The total
FARMGINH
number of times that a link wasinhibited by far-endmanagement. Not reported forIPVL, IPVLGW, or IPVHSLlinks.
142E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
peg countNumber of SignalingLinkFailures – Abnormal
NDCLFLABN
FIB/BSN - Number of times thesignaling link was takenout-of-service because ofabnormal FIB/BSN received. Acount was accumulated if twobackward sequence numbervalues in three consecutivelyreceived MSUs or FISUs are notthe same as the previous one orany of the forward sequencenumbers of the signal units inthe retransmission buffer at thetime they are retransmitted.Reported for MTP2 Links only.Occurrences of this conditionwhile the link is not in-serviceare not accumulated in thisregister.
peg countLink Failure – Alignment orProving Failure - Number of
NDCLFALP
times a signaling link wasreturned to out-of-servicebecause of the excessive errorrate detected by the alignmenterror rate monitor (AERM). Notreported for SAAL class links.
peg countLink Failure – Too ManyInterrupts -
NDCLFINTR
The number of times a signalinglink was out-of-service becausean excessive number of linkinterrupts occurred.
peg countLink Failure - Loss ofSynchronization -
NDCLFSYNC
Number of times that the linkwas taken out-of-service becauseof a loss of synchronization.
peg countNumber of Signaling LinkFailures – Excessive Delay of
NDCFLXDA
Acknowledgment - The numberof times a signaling link wasout-of-service due to anexcessive delay in
143E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
acknowledgments. For SAALand IPVHSL class links, timerNO_RESPONSE expired forPOLL/STAT response. Notreported for IPVL and IPVLGWclass links.
peg countNumber of Signaling LinkFailures - Excessive Duration of
NDCFLXDC
Congestion - The number oftimes a signaling link wasout-of-service because the timerT6 (remote congestion) expired.
• For SAAL and IPVHSL classlinks, timer NO_CREDITexpired for POLL/STATresponse.
• Not reported for IPVL andIPVLGW class links.
peg countNumber of Signaling LinkFailures – Excessive Error Rate
NDCFLXER
- Number of times a signalinglink was out-of-service becauseit reached the signal unit errorrate monitor (SUERM) threshold.
peg countNumber of Near-EndManagement Inhibits - Number
NEARMGIH
of times a link was unavailableto MTP level 3 because it waslocally inhibited. Not reportedfor IPVL, IPVLGW, or IPVHSLlinks.
peg countNumber of Signaling LinkDeclared Failures All Types -
NMDCLFLR
The cumulative total of all linkfailures.
peg countNumber of Far-End ProcessorOutages -
NMFEPRO
The total number of far-endprocessor outages. Reported forMTP2 links only.
peg countNumber of Local ProcessorOutages - The total number oflocal processor outages.
NMLCLPRO
144E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
peg countPCR N1 or N2 Count Exceeded- The total number of forced
PCRN1N2EXC
retransmissions when preventivecyclic retransmission (PCR) isused as the error correctionmethod on a link. Reported forMTP2 links only.
statusIndication of Data Validity:STATUS
K indicates good dataI indicates incompleteintervalN indicates data not current
peg countNumber of SUs Received inError - SUs received with
SURCVERR
checksum errors, indicatingtransmission errors. (For MTP2class links, applies to FISUs,LSSUs and MSUs. For SAALclass links and ATM HSLs, thisregister reflects the number ofSSCOP PDUs received witherrors).
peg countSignaling Units Received - Thetotal number of signaling units
SUSRECVD
received. (For ATM HSLs thisregister reflects the number ofSSCOP PDUs received).
peg countSignaling Units Transmitted -The total number of signaling
SUSTRAN
units transmitted. (For ATMHSLs this register reflects thenumber of SSCOP PDUstransmitted.)
UI Reports
UI Example Output:
Note: Only non-zero measurements are shown in the UI reports. The examples will show all registerswith non-zero values.
• rept-meas:type=avl:enttype=link:loc=xxxx:link=x:nzo=no
tekelecstp 12-02-20 17:46:57 EST EAGLE5 44.0.0 TYPE OF REPORT: AVAILABILITY MEASUREMENTS ON LINK REPORT PERIOD: LAST
145E86977 Revision 1, July 2017
ReportsMeasurements
REPORT INTERVAL: 12-02-20, 17:00:00 THROUGH 17:29:59
LINK-AVL MEASUREMENTS: LOC: 1104, LINK: A , LSN: mtp2 (MTP2)
These measurements are from 12-02-20, 17:00:00 through 17:29:59. NEARMGIH = 0, FARMGINH = 0, NMDCLFLR = 0, DRDCLFLR = 0, SURCVERR = 0, DRLKINHB = 0, NDCFLABN = 0, NDCLFSYNC = 0, NDCFLXDA = 0, NDCFLXER = 0, NDCFLXDC = 0, NDCLFALP = 146, NDCLFINTR = 0, NMFEPRO = 0, NMLCLPRO = 0, DRFEPRO = 0, DRLCLPRO = 0, SUSRECVD = 0, SUSTRAN = 1504478, PCRN1N2EXC = 0
;
tekelecstp 12-03-21 01:08:44 EST EAGLE5 44.0.0 TYPE OF REPORT: AVAILABILITY MEASUREMENTS ON LINK REPORT PERIOD: LAST REPORT INTERVAL: 12-03-21, 00:30:00 THROUGH 00:59:59
LINK-AVL MEASUREMENTS: LOC: 1103, LINK: A , LSN: ipsg (IPVL)
These measurements are from 12-03-21, 00:30:00 through 00:59:59. NMDCLFLR = 0, DRDCLFLR = 0, NDCLFSYNC = 0, NDCLFALP = 0, NDCLFINTR = 0, NMLCLPRO = 0, DRLCLPRO = 0, SUSRECVD = 0, SUSTRAN = 0
;
tekelecstp 12-03-21 01:10:45 EST EAGLE5 44.0.0 TYPE OF REPORT: AVAILABILITY MEASUREMENTS ON LINK REPORT PERIOD: LAST REPORT INTERVAL: 12-03-21, 00:30:00 THROUGH 00:59:59
LINK-AVL MEASUREMENTS: LOC: 1112, LINK: A , LSN: saal (SAAL)
These measurements are from 12-03-21, 00:30:00 through 00:59:59. NEARMGIH = 0, FARMGINH = 0, NMDCLFLR = 0, DRDCLFLR = 0, SURCVERR = 0, DRLKINHB = 0, NDCLFSYNC = 15, NDCFLXDA = 0, NDCFLXER = 0, NDCFLXDC = 0, NDCLFINTR = 0, NMLCLPRO = 0, DRLCLPRO = 0, SUSRECVD = 0, SUSTRAN = 1560
;
tekelecstp 12-03-21 01:12:42 EST EAGLE5 44.0.0 TYPE OF REPORT: AVAILABILITY MEASUREMENTS ON LINK REPORT PERIOD: LAST REPORT INTERVAL: 12-03-21, 00:30:00 THROUGH 00:59:59
LINK-AVL MEASUREMENTS: LOC: 1107, LINK: A , LSN: ssedcm2 (IPVLGW)
These measurements are from 12-03-21, 00:30:00 through 00:59:59. NMDCLFLR = 0, DRDCLFLR = 0, NDCLFSYNC = 0, NDCLFALP = 0, NDCLFINTR = 0, NMLCLPRO = 0, DRLCLPRO = 0, SUSRECVD = 0, SUSTRAN = 0
;
tekelecstp 12-03-21 01:13:52 EST EAGLE5 44.0.0
146E86977 Revision 1, July 2017
ReportsMeasurements
TYPE OF REPORT: AVAILABILITY MEASUREMENTS ON LINK REPORT PERIOD: LAST REPORT INTERVAL: 12-03-21, 00:30:00 THROUGH 00:59:59
LINK-AVL MEASUREMENTS: LOC: 1203, LINK: A , LSN: hcmimt1 (MTP2-UNCH)
These measurements are from 12-03-21, 00:30:00 through 00:59:59. NEARMGIH = 0, FARMGINH = 0, NMDCLFLR = 0, DRDCLFLR = 0, SURCVERR = 0, DRLKINHB = 0, NDCFLABN = 0, NDCLFSYNC = 0, NDCFLXDA = 0, NDCFLXER = 0, NDCFLXDC = 0, NDCLFALP = 0, NDCLFINTR = 0, NMFEPRO = 0, NMLCLPRO = 0, DRFEPRO = 0, DRLCLPRO = 0, SUSRECVD = 1797679, SUSTRAN = 1797679, PCRN1N2EXC = 0
;
• rept-meas:type=avl:enttype=link:lsn=xxx
tekelecstp 12-02-20 17:49:42 EST EAGLE5 44.0.0 TYPE OF REPORT: AVAILABILITY MEASUREMENTS ON LINK REPORT PERIOD: LAST REPORT INTERVAL: 12-02-20, 17:00:00 THROUGH 17:29:59
LINK-AVL MEASUREMENTS FOR LINKSET mtp2:
LINK-AVL MEASUREMENTS: LOC: 1104, LINK: A , LSN: mtp2 (MTP2)
These measurements are from 12-02-20, 17:00:00 through 17:29:59. NEARMGIH = 0, FARMGINH = 0, NMDCLFLR = 0, DRDCLFLR = 0, SURCVERR = 0, DRLKINHB = 0, NDCFLABN = 0, NDCLFSYNC = 0, NDCFLXDA = 0, NDCFLXER = 0, NDCFLXDC = 0, NDCLFALP = 146, NDCLFINTR = 0, NMFEPRO = 0, NMLCLPRO = 0, DRFEPRO = 0, DRLCLPRO = 0, SUSRECVD = 0, SUSTRAN = 1504478, PCRN1N2EXC = 0
;
tekelecstp 12-03-21 01:27:03 EST EAGLE5 44.0.0 TYPE OF REPORT: AVAILABILITY MEASUREMENTS ON LINK REPORT PERIOD: LAST REPORT INTERVAL: 12-03-21, 00:30:00 THROUGH 00:59:59
LINK-AVL MEASUREMENTS FOR LINKSET ipsg:
LINK-AVL MEASUREMENTS: LOC: 1103, LINK: A , LSN: ipsg (IPVL)
These measurements are from 12-03-21, 00:30:00 through 00:59:59. NMDCLFLR = 0, DRDCLFLR = 0, NDCLFSYNC = 0, NDCLFALP = 0, NDCLFINTR = 0, NMLCLPRO = 0, DRLCLPRO = 0, SUSRECVD = 0, SUSTRAN = 0
;
tekelecstp 12-03-21 01:28:18 EST EAGLE5 44.0.0 TYPE OF REPORT: AVAILABILITY MEASUREMENTS ON LINK REPORT PERIOD: LAST REPORT INTERVAL: 12-03-21, 00:30:00 THROUGH 00:59:59
147E86977 Revision 1, July 2017
ReportsMeasurements
LINK-AVL MEASUREMENTS FOR LINKSET saal:
LINK-AVL MEASUREMENTS: LOC: 1112, LINK: A , LSN: saal (SAAL)
These measurements are from 12-03-21, 00:30:00 through 00:59:59. NEARMGIH = 0, FARMGINH = 0, NMDCLFLR = 0, DRDCLFLR = 0, SURCVERR = 0, DRLKINHB = 0, NDCLFSYNC = 15, NDCFLXDA = 0, NDCFLXER = 0, NDCFLXDC = 0, NDCLFINTR = 0, NMLCLPRO = 0, DRLCLPRO = 0, SUSRECVD = 0, SUSTRAN = 1560
;
tekelecstp 12-03-21 01:28:44 EST EAGLE5 44.0.0 TYPE OF REPORT: AVAILABILITY MEASUREMENTS ON LINK REPORT PERIOD: LAST REPORT INTERVAL: 12-03-21, 00:30:00 THROUGH 00:59:59
LINK-AVL MEASUREMENTS FOR LINKSET ssedcm2:
LINK-AVL MEASUREMENTS: LOC: 1107, LINK: A , LSN: ssedcm2 (IPVLGW)
These measurements are from 12-03-21, 00:30:00 through 00:59:59. NMDCLFLR = 0, DRDCLFLR = 0, NDCLFSYNC = 0, NDCLFALP = 0, NDCLFINTR = 0, NMLCLPRO = 0, DRLCLPRO = 0, SUSRECVD = 0, SUSTRAN = 0
;
tekelecstp 12-03-21 01:29:09 EST EAGLE5 44.0.0 TYPE OF REPORT: AVAILABILITY MEASUREMENTS ON LINK REPORT PERIOD: LAST REPORT INTERVAL: 12-03-21, 00:30:00 THROUGH 00:59:59
LINK-AVL MEASUREMENTS FOR LINKSET hcmimt1:
LINK-AVL MEASUREMENTS: LOC: 1203, LINK: A , LSN: hcmimt1 (MTP2-UNCH)
These measurements are from 12-03-21, 00:30:00 through 00:59:59. NEARMGIH = 0, FARMGINH = 0, NMDCLFLR = 0, DRDCLFLR = 0, SURCVERR = 0, DRLKINHB = 0, NDCFLABN = 0, NDCLFSYNC = 0, NDCFLXDA = 0, NDCFLXER = 0, NDCFLXDC = 0, NDCLFALP = 0, NDCLFINTR = 0, NMFEPRO = 0, NMLCLPRO = 0, DRFEPRO = 0, DRLCLPRO = 0, SUSRECVD = 1797679, SUSTRAN = 1797679, PCRN1N2EXC = 0
;
148E86977 Revision 1, July 2017
ReportsMeasurements
FTP Reports
Table 55: FTP AVL LINK Column Headers
DescriptionFieldName
Linksetname
LSN
Cardlocation
LOC
Link portLINK
Link typeLNKTYPE
FTP Example Output File Name:avl-link_20101005_1830.csv
FTP Example Output File Format:
"CLLI","SWREL","RPTDATE","RPTIME","TZ","RPTTYPE","RPTPD","IVALDATE","IVALSTART","IVALEND","NUMENTIDS"<cr><lf>"tekelecstp","EAGLE5 44.0.0-64.23.0","2012-02-20","17:52:43","EST ","AVAILABILITY MEASUREMENTS ON LINK","LAST","2012-02-20","17:00:00","17:30:00",6<cr><lf><cr><lf>"STATUS","LSN","LOC","LINK","LNKTYPE","NEARMGIH","FARMGINH","NMDCLFLR","DRDCLFLR","SURCVERR","DRLKINHB","NDCFLABN","NDCLFSYNC","NDCFLXDA","NDCFLXER","NDCFLXDC","NDCLFALP","NDCLFINTR","NMFEPRO","NMLCLPRO","DRFEPRO","DRLCLPRO","SUSRECVD","SUSTRAN","PCRN1N2EXC"<cr><lf>"K","hcmimt1","1203","A ","MTP2-UNCH",0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0<cr><lf>"K","ipsg","1103","A ","IPVL",0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0<cr><lf>"K","mtp2","1104","A ","MTP2",0,0,0,0,0,0,0,0,0,0,0,146,0,0,0,0,0,0,1504478,0<cr><lf>"K","m3uals","1105","A ","IPVLGW",0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0<cr><lf>"K","ssedcm2","1107","A ","IPVLGW",0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0<cr><lf>"K","saal","1112","A ","SAAL",0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1562,0<cr><lf>
Assuming each data line will be:
4 char status + 13 char LSN + 7 char LOC + 5 char LINK + 12 char LNKTYPE + 20*(6 char data) + 2 =163 chars
Table 56: Typical File Size: avl-link.csv
File Size=Report data+Reportheader+System
header
82,011 bytes=81,500+261+250
149E86977 Revision 1, July 2017
ReportsMeasurements
STPLAN AVL Report
This enttype consists of measurements for LIM and DSM cards. The outputs are separate for the UIreports and combined for the FTP reports. The FTP reports appear after the UI reports for the DSMcards.
Note: The peg counts forSTPLAN measurements have the possibility of rolling over during periodsof highSTPLAN message transmit and receive. On the measurement reports these measurements showup as negative numbers. This indicatesSTPLAN transmit and receive measurements have valuesgreater than four gigabytes of data.
Command Examples
• UI
rept-meas:type=avl:enttype=stplan:loc=xxxx
• FTP
rept-ftp-meas:type=avl:enttype=stplan
Table 57: Availability STPLAN Measurements
UnitDescriptionEvent Name
peg countEthernet Alignment Error - Thenumber of packets not received
ENETALNERR
over the STPLAN interfacebecause of Ethernet alignmenterrors.
peg countEthernet Bus Busy - The numberof transmissions attempted when
ENETBUSBSY
the STPLAN Ethernet bus wasbusy.
peg countEthernet Collision Error - Thenumber of packets not
ENETCOLERR
transmitted by STPLAN becauseof excessive collisions on theSTPLAN Ethernet bus. The FTCReports will display this registeras zero for card types other thanACM cards.
peg countEthernet CRC Error - Thenumber of packets not received
ENETCRCERR
on the STPLAN Ethernet due toCRC errors.
peg countEthernet Octets Received - Thetotal number of octets received
ENETOCTRCV
on the STPLAN Ethernetinterface.
150E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
peg countEthernet Octets Transmitted -The total number of octets
ENETOCTXMT
transmitted on the STPLANEthernet interface.
peg countEthernet Receive BufferOverflow Errors - The number
ENETOVRERR
of packets not received bySTPLAN because of a receivebuffer overflow.
peg countIP Address Error - The totalnumber of inbound IP
IPADDRERR
datagrams discarded on theSTPLAN interface due to a baddestination address.
peg countIP Header Errors - The totalnumber of inbound IP
IPHDRERR
datagrams discarded on theSTPLAN interface due to headererrors. The FTC Reports willdisplay this register as zero forcard types other than ACMcards.
peg countIP Protocol Error - The numberof inbound IP datagrams
IPPROTERR
discarded by STPLAN due to anerror in the packet (invalidprotocol). The FTC Reports willdisplay this register as zero forcard types other than ACMcards.
peg countSTPLAN Discarded 1 - Numberof SLAN MSUs discarded by the
SLANDISC1
LIM cards for STPLAN featuredisabled and records aging offof the local queue.
peg countSTPLAN Discarded 2 - Thenumber of SLAN MSUs
SLANDISC2
discarded by the SLAN cards fornetwork problems andunreachable far end servers.During network outages theSLAN cards will stop TVG/MFCgrants or go into flow control.This causes the PDUs to be
151E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
queued on the LIM cards, so themajority of discards will bepegged on SLANDISC1 underthese circumstances.
msecSTPLAN Disabled – Theduration that the STPLAN
SLANDSBLD
screening/copy feature wasdisabled.
peg countSTPLAN Screened – Number ofMSUs that were copied to the
SLANSCRND
STPLAN interface after passinggateway screening.
peg countSTPLAN Transmit - Thenumber of MSUs sent to the host
SLANXMIT
destination. The FTC Reportswill display this register as zerofor card types other than ACMcards.
peg countSTPLAN Transmit - Thenumber of MSUs sent to the hostdestination.
SLANXMIT
peg countTCP Connections Failed - Thetotal number of TCP connections
TCPCONNFLD
that have failed on the STPLANinterface. MCP/OAMHCReports will display this registeras zero for card types other thanACM cards.
peg countTCP Segment Received - Thetotal number of TCP segments
TCPSEGRCVD
received on the STPLANinterface. MCP/OAMHCReports will display this registeras zero for card types other thanACM cards.
peg countTCP Segment Sent - The totalnumber of TCP segments sent
TCPSEGSENT
on the STPLAN interface. TheFTC Reports will display thisregister as zero for card typesother than ACM cards
152E86977 Revision 1, July 2017
ReportsMeasurements
UI Example Output:
e1061001 10-08-16 19:36:15 EST EAGLE5 42.0.0-63.32.0 TYPE OF REPORT: AVAILABILITY MEASUREMENTS ON STPLAN REPORT PERIOD: LAST REPORT INTERVAL: 10-08-16 19:00:00 THROUGH 19:29:59
STPLAN-AVL MEASUREMENTS: LOC: 1215
These measurements are from 10-08-16 19:00:00 through 19:29:59. SLANDSBLD = 0 SLANDISC1 = 0 SLANDISC2 = 0 SLANSCRND = 0 SLANXMIT = 0 ENETALNERR = 0 ENETCRCERR = 0 ENETCOLERR = 0 ENETBUSBSY = 0 ENETOVRERR = 0 ENETOCTXMT = 0 ENETOCTRCV = 0 TCPCONNFLD = 0 TCPSEGRCVD = 0 TCPSEGSENT = 0 TCPSEGXMT2 = 0 TCPRCVERR = 0 TCPRSTSENT = 0 IPHDRERR = 0 IPADDRERR = 0 IPPROTERR = 0
;
e1061001 10-08-16 19:36:17 EST EAGLE5 42.0.0-63.32.0 END OF ON-DEMAND STPLAN-AVL MEASUREMENT REPORT;
FTP Example Output File Name:avl-stplan_19990117_1530.csv
FTP Example Output File Format:
"CLLI","SWREL","RPTDATE","RPTIME","TZ","RPTTYPE","RPTPD","IVALDATE","IVALSTART","IVALEND","NUMENTIDS""e1061001","EAGLE5 42.0.0-63.32.0","2010-08-16","20:46:45","EST ","AVAILABILITY MEASUREMENTS ON STPLAN","LAST","2010-08-16","20:00:00","20:30:00",2
"STATUS","TYPE","LOC","SLANDSBLD","SLANDISC1","SLANDISC2","SLANSCRND","SLANXMIT","ENETALNERR","ENETCRCERR","ENETCOLERR","ENETBUSBSY","ENETOVRERR","ENETOCTXMT","ENETOCTRCV","TCPCONNFLD","TCPSEGRCVD","TCPSEGSENT","TCPSEGXMT2","TCPRCVERR","TCPRSTSENT","IPHDRERR","IPADDRERR","IPPROTERR""K","LIM","1104",0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0"K","DSM","1215",0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
Assuming each data line will be:
4 char status + 6 char TYPE + 7 char LOC + 21*(6 char data) + 2 = 145 chars
For a report of 100 LIMs and 10 DSMs, the typical file size is:
Table 58: Typical File Size: avl-stplan.csv
File Size=Report data+Reportheader+System
header
679 bytes=145+284+250
Daily Maintenance Measurements (MTCD)
The Daily Maintenance (MTCD) reports provide measurements useful in determining STP performancebased on traffic.
153E86977 Revision 1, July 2017
ReportsMeasurements
Entity Types: STP, LINK, LNKSET, STPLAN, LNP, NP, EIR, MAPSCRN, SCTPASOC, SCTPCARD,UA, VFLEX, GTTAPATH, AIQ, ATINPQ, SIP, DEIR, ENUM, SFTHROT
Default Accumulation Interval: 24 hours
STP Retention Period:
• 24 hours: STP, LINK, LNKSET, STPLAN, SCTPASOC, SCTPCARD, UA, SIP, ENUM, SFTHROT
• 7 days: LNP, NP, EIR, MAPSCRN, VFLEX, ATINPQ, AIQ, GTTAPATH, DEIR
Reporting Modes: Scheduled and On-Demand
Note: Daily measurements are not available for the following features on the E5-OAM if the IntegratedMeasurements feature is not enabled:
• ATINPQ/PATINP• AIQ• EGMS• VFLEX• GTT Actions• EIR• LNP 384
Accessible Collection Periods: Last, Specific
STP MTCD Report
Example Commands:
UI : rept-meas:type=mtcd:enttype=stpFTP : rept-ftp-meas:type=mtcd:enttype=stp
Table 59: Daily Maintenance (MTCD) and Day-To-Hour Maintenance (MTCDTH) Measurements
UnitDescriptionEvent Name
peg countCritical System Alarms - Thetotal number of critical systemalarms.
CRSYSAL
secondsCumulative DurationofSignaling Link DeclaredFailures All Types -
DRDCLFLR
The cumulative duration of alllink failures.
secondsDuration ofLink Outage - Thetotal time a link was unavailableto MTP level 3 for any reason.
DURLKOTG
peg countDTAMSUsLost - The totalnumber of MSUs that were
DTAMSULOST
154E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
discarded because the redirectfunction was turned off or theoriginal MSU was too large to beencapsulated.
peg countG-FlexGTTs with Match - Thetotal number of G-Flex Global
GFGTMATCH
Title Translation successfullycompleted.
peg countG-FlexGTTs No Match - Thetotal number of G-Flex Global
GFGTNOMCH
Title Translations completed thatdid not match an entry in theGSM database.
peg countG-FlexGTTs No Look-up - Thetotal number of G-Flex Global
GFGTNOLKUP
Title Translations that could notbe looked up in the GSMdatabase because of an error, i.e.,when the G-Flex SCCP CdPAverification fails.
peg countGTTs Performed - Usually, thetotal number of MSUs that
GTTPERFD
successfully completed globaltitle translation (GTT). Alsoincludes G-Port and INPMSUsthat got a match in either theG-Port, INP, or GTT DB.
Sometimes, GTTPERFD indicatesthe total number of global titletranslations (GTTs) performedon MSUs that successfullycompleted GTT, because severalGTTs may happen for the sameMSU. One scenario wheremultiple GTTs occur for an MSUoccurs is when the ANSI/ITUSCCP Conversion Feature isactivated. In this case, the countfor GTTPERFD can be doublewhat it would be without thefeature, although the number ofMSUs received by the EAGLEdid not change.
peg countGTTs Unable to Perform -Diagnostic 0: No Translation for
GTTUN0NS
155E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
Address of Such Nature – Totalnumber of times that thespecified translation type in anMSU was not supported by theSTP or the form of the GTT wasincorrect for the giventranslation type. Also includesG-Flex, INP and GTT MSUs thatdid not match on new selectors(GTI,NP,NAI) in addition toones not matching on TT.
peg countGTTs Unable to Perform -Diagnostic 1: No Translation for
GTTUN1NT
This Address – The sum total oftimes that SCCP could not finda translation in the translationtable. This includes Global Titletranslations, Point Codetranslations, and Subsystemtranslations.
In general, this register containsthe sum of the GTTUN1NTregister in the systot-tt reportand the CGGTTUN1NT
peg countMSUs Relayed - Total numberof IDP messages relayed to theirdestination.
MSIDPNOMCH
peg countMSUs Returned – Total numberof IDP messages returned to
MSIDPMATCH
originating MSC. Thesemessages bypass the prepaidengine since it has beendetermined that they meet thecriteria for subscribers withunlimited prepaid calling plan.
peg countMSUs Rcvd – InvalidDPC -MSINVDPC
Number of MSUs received anddiscarded because the DPCcould not be found in the STProuting table.
peg countMSUs Discarded – InvalidSIF -Number of MSUs that have been
MSINVSIF
received and discarded becauseof an invalid SIF.
156E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
peg countMSUs Rcvd – Invalid ServiceIndicator Octet (SIO) -
MSINVSIO
Number of MSUs received anddiscarded because the servicerequested in the service indicatoroctet (SIO) was not supported bythe STP.
peg countMajor system alarms - The totalnumber of major system alarms.
MASYSAL
peg countMinor system alarms - The totalnumber of minor system alarms.
MISYSAL
peg countMSUs Discarded – InvalidLink- Number of MSUs discarded
MSINVLNK
because of an incorrect SLC. (TheSLC refers to a nonexistent linkor the same link.)
peg countMSUs Discarded – InvalidSLC-
MSINVSLC
Number of MSUs discardedbecause of an invalid SLC codein the ECO/COO.
peg countMSUs Discarded –InaccessibleDPC -
MSNACDPC
The total number of MSUsdiscarded because of aninaccessible DPC.
peg countMSUs Discarded – RoutingFailure -
MSSCCPFL
Number of MSUs discarded dueto an SCCP routing failure. Alsoincludes G-Flex, INP MSUs thatgot a match from either theG-Flex, INP or GTT DB butcannot be routed due to PC or SScongestion, PC or SS unavailable,SS unequipped, or anunqualified error.
peg countMSUSCCP Failure - Total MSUsDiscarded Due to SCCPConversion Failure.
MSUSCCPFLR
157E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
peg countMSUs Discarded –GatewayScreening -
MSUDSCRD
The total number of MSUs thatfailed gateway screening andwere discarded. See linksetreport for individual peg counts.
peg countMSUs Discarded – Level2/Level 3 Queue Full -
MSULOST1
Number of MSUs discardedbecause the level 2 to level 3queue was full.
peg countMSUs Discarded –Route OnHold Buffer Overflow -
MSULOST2
Number of MSUs discardedbecause the routing buffer wasin overflow.
peg countMSUs Discarded –MSULOST3
1. LS On Hold BufferOverflow - The number ofMSUs discarded because thelinkset-on-hold buffer was inoverflow. The On HoldBuffer is used duringchangeover/changebacksituations to ensure thattraffic is sequenced correctly.During changeover andchangeback, MSUs that wereoriginally sent over linkswhich are now failed (notIS-NR) are buffered while thechangeover/changebackprocedures are carried out.Once those procedures arecompleted, the traffic in theon-hold buffer is routedbased on the currentconfiguration.
2. LSL LIM does not have SCCPassignment for receivedSCCP traffic.
3. HSL –
158E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
• All Class 1 (sequenced)GTT traffic addressed toEAGLE
• A Class 0 GTT messagefor EAGLE arrives whenthe SCCP TVG queue isfull
• A GTT message in theSCCP TVG queue is morethan 2 seconds old.
peg countMSUs Discarded – Rcv QueueFull -
MSULOST4
Number of MSUs discardedbecause the receive queue wasfull.
peg countMSUs Discarded –LIM Init -MSULOST5
Number of MSUs discardedwhile the LIM card wasinitializing.
peg countMSUs Discarded – The numberof MSUs discarded due to an
MSULOST6
error encountered duringinternal (IMT) transfer of MSUbetween cards.
peg countMTP Restarts Initiated -Number of times MTP restart
MTPRESTS
was initiated by the STP. Thecount does not include thenumber of MTP restarts initiatedas a result of messages fromadjacent nodes.
peg countMSUs Originated - Invalid DPC- The number of MSUsoriginated with an invalid DPC.
OMSINVDPC
peg countOriginatedMSUs -ORIGMSUS
The total number of outgoingMSUs successfully passed toMTP level 2 for transmission,while carrying the STP pointcode in the OPC field. For IPGWlinks, this register includescounts for management
159E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
messages such as RST messages.This register is not an aggregateof link or linkset registers.
peg countOversizedMTP 3 Messages -Oversized MTP 3 messages
OVSZMSG
exceeding 272 octets (level 3) thatare received by an HSL and arediscarded.
peg countThe total number of times that aGTT translation matched a
SCCPLOOP
Point Code in the STP’s loopsetentries resulting in either a notifyor discard of an SCCP message.
statusIndication of Data Validity:STATUS
K indicates good dataI indicates incompleteintervalN indicates data not current
peg countThrough-SwitchedMSUs -THRSWMSU
The total number of MSUs thatdid not carry the STP point codein the OPC or the DPC, and weresuccessfully passed to MTP level2 for transmission.
peg countTerminatedMSUs - The totalnumber of incoming MSUs
TRMDMSUS
carrying the STP point code inthe DPC.
peg countTranslation Type MappingTranslations Performed - The
TTMAPPF
total number of Translation TypeMapping translations performed(that is, a mapped SS7 messagetranslation type was found forthe existing SS7 messagetranslation type).
peg countTotal number of messages forwhich UDT(S) to XUDT(S),
UDTXUDTF
XUDT(S) to UDT(S) orSegmented XUDT(S) to UDT(S)conversion has failed.
160E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
peg countX-List Entry Not Created - Thetotal number of times that an
XLXTELEI
X-List entry was not createdbecause the ELEI for the clusterwas set to ‘yes’.
peg countX-List Entry Not Created - Thetotal number of times an X-List
XLXTSPACE
entry was not created due to lackof space in the route/destinationtable.
UI Example Output:
e1061001 11-01-23 00:10:07 MST EAGLE5 43.0.0-63.49.0 TYPE OF REPORT: DAILY MAINTENANCE MEASUREMENTS ON STP REPORT PERIOD: LAST REPORT INTERVAL: 11-01-22 00:00:00 THRU 23:59:59
STP-MTCD MEASUREMENTS
ORIGMSUS = 0, TRMDMSUS = 0, THRSWMSU = 0, MTPRESTS = 0, DTAMSULOST = 0, MSINVDPC = 0, MSINVSIO = 0, OMSINVDPC = 0, MSINVLNK = 0, MSINVSIF = 0, MSNACDPC = 0, MSINVSLC = 0, GTTPERFD = 0, GTTUN0NS = 0, GTTUN1NT = 0, MSSCCPFL = 0, MSULOST1 = 0, MSULOST2 = 0, MSULOST3 = 0, MSULOST4 = 0, MSULOST5 = 0, DRDCLFLR = 0, DURLKOTG = 7713, CRSYSAL = 10, MASYSAL = 15, MISYSAL = 95, XLXTSPACE = 0, XLXTELEI = 0, TTMAPPF = 0, MSUDSCRD = 0, OVSZMSG = 0, GFGTMATCH = 0, GFGTNOMCH = 0, GFGTNOLKUP = 0, MSUSCCPFLR = 0, MSSCCPDISC = 0, MSIDPNOMCH = 0, MSIDPMATCH = 0, MSULOST6 = 0, SCCPLOOP = 0, UDTXUDTF = 0
FTP Example Output
FTP Example Output File Name: mtcd-stp_19990116_2400.csv
FTP Example Output File Format:
"CLLI","SWREL","RPTDATE","RPTIME","TZ","RPTTYPE","RPTPD","IVALDATE","IVALSTART","IVALEND","NUMENTIDS""e1061001","EAGLE5 43.0.0-63.49.0","2011-01-23","01:11:43","MST ","DAILY MAINTENANCE MEASUREMENTS ON STP","LAST","2011-01-22","00:00:00","24:00:00",1
"STATUS","ORIGMSUS","TRMDMSUS","THRSWMSU","MTPRESTS","DTAMSULOST","MSINVDPC","MSINVSIO","OMSINVDPC","MSINVLNK","MSINVSIF","MSNACDPC","MSINVSLC","GTTPERFD","GTTUN0NS","GTTUN1NT","MSSCCPFL","MSULOST1","MSULOST2","MSULOST3","MSULOST4","MSULOST5","DRDCLFLR","DURLKOTG","CRSYSAL","MASYSAL","MISYSAL","XLXTSPACE","XLXTELEI","TTMAPPF","MSUDSCRD","OVSZMSG","GFGTMATCH","GFGTNOMCH","GFGTNOLKUP","MSUSCCPFLR","MSSCCPDISC","MSIDPNOMCH","MSIDPMATCH","MSULOST6","SCCPLOOP","UDTXUDTF""K",0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,7713,10,15,95,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
Typical file size:
161E86977 Revision 1, July 2017
ReportsMeasurements
Table 60: Typical File Size: mtcd-stp.csv
File Size=Report data+Reportheader+System
header
985 bytes=252+483+250
LINK MTCD Report
Certain registers are reported for MTP2, SAAL, IPVL, and IPVHSL classes. These registers aresummarized in Table 61: Registers Reported per LINK CLASS for Daily (MTCD) and Day-To-Hour(MTCDTH) Link Measurements.
Table 61: Registers Reported per LINK CLASS for Daily (MTCD) and Day-To-Hour (MTCDTH)Link Measurements
IPVHSL ClassIPVLGW ClassIPVL ClassSAAL ClassMTP2 ClassEvent Name
XXXXXACHGOVRS
XXDRBSYLNK
XXXXXDRDCLFLR
XXDRFEPRO
XXXXXDRLCLPRO
XXXDRLKINHB
XXXXXECCNGLV1
XXXXXECCNGLV2
XXXXXECCNGLV3
XECLNKCB
XECLNKXCO
XXXFARMGINH
XXXLMSUOCTRCV
XXXLMSUOCTTRN
XXXLMSURCV
XXXLMSURCVDSC
XXXLMSUTRN
XXXLMSUTRNDSC
162E86977 Revision 1, July 2017
ReportsMeasurements
IPVHSL ClassIPVLGW ClassIPVL ClassSAAL ClassMTP2 ClassEvent Name
XXXXXLNKAVAIL
XM2PLKNIS
XM2PUDMRC
XM2PUDMTR
XM2PUDOCR
XM2PUDOCT
XXXXXMOCTRCVD
XXXXXMOCTTRAN
XXXXXMSGDISC0
XXXXXMSGDISC1
XXXXXMSGDISC2
XXXXXMSGDISC3
XXXXXMSGSRCVD
XXXXXMSGSTRAN
XMSURCERR
XMSURETRN
XNDCFLABN
XXXNDCFLXDA
XXXNDCFLXDC
XXNDCFLXER
XXXNEARMGIH
XNEGACKS
XXXXXNMLCLPRO
XXXXXNMDCLFLR
XXNMFEPRO
XOCTRETRN
XPCRN1N2EXC
163E86977 Revision 1, July 2017
ReportsMeasurements
IPVHSL ClassIPVLGW ClassIPVL ClassSAAL ClassMTP2 ClassEvent Name
XSDPDURTR
XXXXXTDCNGLV1
XXXXXTDCNGLV2
XXXXXTDCNGLV3
XXXXXTLNKACTV
Command Examples
• FTP:
rept-ftp-meas:type=mtcd:enttype=link
Measurement Events
Table 62: Maintenance Daily (MTCD) and Maintenance Day-to-Hour (MTCDTH) LinkMeasurements
UnitDescriptionEvent Name
peg countNumber of AutomaticChangeovers - Number of times
ACHGOVRS
that a changeover procedure wasused to divert traffic from onelink to alternative links.
secondsCumulative Duration of BusyLink Status-
DRBSYLNK
The total elapsed time betweenthe receipt of a busy LSSU, andwhen the next message wasacknowledged. This is the sumof all occurrences of busy linkstatus. Reported for MTP2 Linksonly.
secondsCumulative Duration ofSignaling Link Declared
DRDCLFLR
Failures All Types - Thecumulative duration of all linkfailures.
secondsDuration of Far-End ProcessorOutage -
DRFEPRO
The cumulative duration that alink was unavailable to MTP
164E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
level 3 because of a processoroutage at the far-end networkelement (SIPO received).Reported for MTP2 and IPVHSLclass links ONLY.
secondsDuration of Local ProcessorOutage -
DRLCLPRO
The cumulative duration that alink was unavailable to MTPlevel 3 because of a processoroutage at the near-end networkelement.
secondsDuration Link Inhibited - Thecumulative duration that a link
DRLKINHB
was inhibited at the local orfar-end network element.
peg countEvent Count for Entering Level1 Link Congestion - The total
ECCNGLV1
number of times that linkcongestion level 1 was entered.
peg countEvent Count for Entering Level2 Link Congestion - The total
ECCNGLV2
number of times that linkcongestion level 2 was entered.
peg countEvent Count for Entering Level3 Link Congestion - The total
ECCNGLV3
number of times that linkcongestion level 3 was entered.
peg countNumber of times the linkperformed ChangeBack
ECLNKCB
procedures, includingtime-controlled ChangeBacks.
peg countNumber of times the linkperformed Extended
ECLNKXCO
ChangeOver procedure,including time-controlledChangeOvers.
peg countNumber of Far-EndManagement Inhibits - Number
FARMGINH
of times a link was inhibitedsuccessfully from the far-end.
165E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
peg countTotal number of messages thatare sent from a GTT enabledIPSG card to an SCCP card.
GTTFORSM
peg countTotal number of messages onwhich GTT is performed on aGTT enabled IPSG card.
GTTONLIM
octetsThe number of octets receivedin large MSUs. This register is
LMSUOCTRCV
pegged in addition toMOCTRCVD when the LargeMSU Support for IP Signalingfeature status is on and a largeMSU is successfully received.
octetsThe number of octetstransmitted in large MSUs. This
LMSUOCTTRN
register is pegged in addition toMOCTTRAN when the LargeMSU Support for IP Signalingfeature status is on and a largeMSU is successfully transmitted.
peg countThe number of large MSUsreceived. This register is pegged
LMSURCV
in addition to MSGSRCVD whenthe Large MSU Support for IPSignaling feature status is on anda large MSU is successfullyreceived.
peg countThe number of large MSUsdiscarded in the receive path.
LMSURCVDSC
This can occur when the LargeMSU Support for IP Signalingfeature is not on or when theMSU is larger than 4095 bytes orwhen a routing failure occurs.
peg countThe number of large MSUstransmitted. This register is
LMSUTRN
pegged in addition toMSGSTRAN when the LargeMSU Support for IP Signalingfeature status is on and a largeMSU is successfully transmitted.
peg countThe number of large MSUsdiscarded in the transmit path.
LMSUTRNDSC
166E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
secondsLink Available Time - The totaltime the link was available toMTP level 3.
LNKAVAIL
msecM2PA Link Not-in-ServiceDurationThe duration the link
M2PLKNIS
was not in the in-service (INS)state at the M2PA layer (inseconds), i.e., during which thelink was in any of the otherdefined M2PA states (such asIDLE, OOS, AIP, PROVING,ALIGNED READY, orRETRIEVAL).
peg countThe number of M2PA UDMsreceived.
M2PUDMRC
peg countThe number of M2PA User DataMessages (UDMs) transmitted.
M2PUDMTR
octetsThe number of M2PA UDMoctets received.
M2PUDOCR
octetsThe number of M2PA User DataMessage (UDM) octetstransmitted.
M2PUDOCT
octetsMessage Octets Received -MOCTRCVD
Total number of octets associatedwith Messages received,including those removed forMTP level 2 processing andthose for which retransmissionhas been requested.
• For SAAL, IPVL, IPVHSL,and IPVLGW class linksets -applies to MTP level 3message bytes.
octetsMessage Octets Transmitted -Total number of octets associated
MOCTTRAN
with MSUs transmitted to thefar-end. For all linkset classes,this includes octets for MTP level3 SIO and SIF.
• For MTP2 class linksets,octets included are thoseassociated with Messages
167E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
transmitted ANDacknowledged by level 2, aswell as any retransmittedMessages. Additional octetsincluded are MTP level 2 flag,BSN/BIB, FSN/BIB, LI, andCRC octets.
• For SAAL and IPVHSL classlinksets, octets are notincluded until the Message isacknowledged by level 2.
• For IPVL and IPVLGW classlinks, octets are not includeduntil the Message istransmitted by level 2. ForIPVLGW class linksets, SNMs(Messages with SI=0) areNOT included.
peg countFor ANSI links: Priority 0 MSUsDiscarded Due to Congestion -
MSGDISC0
The total number of priority 0MSUs discarded due tocongestion (any level).
• For SAAL class links, appliesto MTP level 3 messages .
Note: EAGLE supports this oneITU discard counter only. Whenthe discard threshold is reached,all MSUs are discarded andcounted in this register. Prior tothe discard threshold beingreached, no MSUs are discarded.
Note: The MSUs or Messagesmay be discarded on thetransmit/outbound link, whichindicates congestion via theECCNGLVLx or TDCNGLVxregisters or it may appear oninbound links routing traffic tothose congested links. The latterwill not indicate eitherECCNGLVLx or TDCNGLVx.
peg countFor ANSI links: Priority 1 MSUsDiscarded Due to Congestion -
MSGDISC1
168E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
The total number of priority 1MSUs discarded due tocongestion (any level).
• For SAAL class links, appliesto MTP level 3 messages .
For ITU links: this register is notapplicable.
Note: The MSUs or Messagesmay be discarded on thetransmit/outbound link, whichindicates congestion via theECCNGLVLx or TDCNGLVxregisters or it may appear oninbound links routing traffic tothose congested links. The latterwill not indicate eitherECCNGLVLx or TDCNGLVx.
peg countFor ANSI links: Priority 2 MSUsDiscarded Due to Congestion -
MSGDISC2
The total number of priority 2MSUs discarded due tocongestion (any level).
• For SAAL class links, appliesto MTP level 3 messages .
For ITU links: this register is notapplicable.
Note: The MSUs or Messagesmay be discarded on thetransmit/outbound link, whichindicates congestion via theECCNGLVLx or TDCNGLVxregisters or it may appear oninbound links routing traffic tothose congested links. The latterwill not indicate eitherECCNGLVLx or TDCNGLVx.
peg countFor ANSI links: Priority 3 MSUsDiscarded Due to Congestion -
MSGDISC3
The total number of priority 3MSUs discarded due tocongestion (any level).
• For SAAL class links, appliesto MTP level 3 messages .
169E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
For ITU links: this register is notapplicable.
Note: The MSUs or Messagesmay be discarded on thetransmit/outbound link, whichindicates congestion via theECCNGLVLx or TDCNGLVxregisters or it may appear oninbound links routing traffic tothose congested links. The latterwill not indicate eitherECCNGLVLx or TDCNGLVx.
peg countMSUs Received - Total numberof MSUs received, including
MSGSRCVD
those for which retransmissionhas been requested.
• For SAAL, IPVL, IPVHSL,and IPVLGW class linksets -applies to MTP level 3messages.
peg countMSUs Transmitted -MSGSTRAN
Total number of MSUstransmitted to the far-end,including retransmissions.
• For MTP2 class links, MSUstransmitted ANDacknowledged by level 2.
• For SAAL, IPVL, IPVHSL,and IPVLGW class linksets,MTP level 3 messages offeredfor transmission after anyrequired conversion fromtheir respective M2PA,M3UA, or SUA formats.
peg countNumber of Message signalUnits received in error - bad
MSURCERR
CRC. This register applies toMTP2 links only.
peg countMSUs Retransmitted - Numberof MSUs retransmitted becauseof errors.
MSURETRN
peg countNumber of Signaling LinkFailures - Abnormal FIB/BSN -
NDCFLABN
170E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
The number of times thesignaling link was takenout-of-service because ofabnormal FIB/BSN received. Acount was accumulated if twobackward sequence numbervalues in three consecutivelyreceived MSUs or FISUs are notthe same as the previous one orany of the forward sequencenumbers of the signal units inthe retransmission buffer at thetime they are retransmitted.Reported for MTP2 links only.Occurrences of this conditionwhile the link is not in-serviceare not accumulated in thisregister.
peg countNumber of Signaling LinkFailures - Excessive Delay of
NDCFLXDA
Acknowledgment - Number oftimes a signaling link wasout-of-service due to anexcessive delay inacknowledgments.
• For MTP2and IPVHSL classlinks, level 2 t7 expired level
• For SAAL class links, timerNO_RESPONSE expired forPOLL/STAT response
• Not reported for IPVL andIPVLGW class links
peg countNumber of Signaling LinkFailures - Excessive Duration ofCongestion
NDCFLXDC
• For MTP2 and IPVHSL classlinks, the number of times asignaling link wasout-of-service because theLevel 2 timer T6 (remotecongestion) expired
• For SAAL class links, thenumber of times timerNO_CREDIT expired
• Not reported for IPVL andIPVLGW class links
171E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
peg countNumber of Signaling LinkFailures - Excessive Error Rate
NDCFLXER
- Number of times a signalinglink was out-of-service becauseit reached the signal unit errorrate monitor (SUERM) threshold.Reported for MTP2 and SAALlinks only.
peg countNumber of Near-EndManagement Inhibits - Number
NEARMGIH
of times a link was unavailableto MTP level 3 because it waslocally inhibited. Not reportedfor IPVL and IPVLGW classlinks.
peg countNumber of NegativeAcknowledgments Received
NEGACKS
-Number of times the BSN in anMSU was inverted, indicating aretransmission request. Thisregister is NOT applicable toHSLs.
peg countNumber of Local ProcessorOutages - The total number of
NMLCLPRO
local processor outages in thisSTP.
peg countNumber ofSignalingLinkDeclared Failures All
NMDCLFLR
Types - The cumulative total ofall link failures.
peg countNumber of Far-End ProcessorOutages -
NMFEPRO
Number of far-end processoroutages that have occurred.Reported for MTP2 links only
peg countNumber of MSU octetsretransmitted. This register is
OCTRETRN
NOT reported for SAAL classlinks.
peg countPCR N1 or N2 Count Exceeded- The total number of forced
PCRN1N2EXC
retransmissions when preventivecyclic retransmission (PCR) is
172E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
used as the error correctionmethod on a link. This registeris not applicable to HSLs.
peg countSSCOP SD PDUs Retransmitted- The number of SSCOP
SDPDURTR
sequenced Data PDUs that wereretransmitted, based on anaccumulated count of suchretransmissions conveyed to LM.This measurement replaces theMTP level 2 negativeacknowledgments.
statusIndication of Data Validity:STATUS
K indicates good dataI indicates incompleteintervalN indicates data not current
secondsTotal Duration of Level 1 LinkCongestion - The total time thelink was in level 1 congestion.
TDCNGLV1
secondsTotal Duration of Level 2 LinkCongestion - The total time thelink was in level 2 congestion.
TDCNGLV2
secondsTotal Duration of Level 3 LinkCongestion - The total time thelink was in level 3 congestion.
TDCNGLV3
secondsLink active time - total time thelink is active and transmittingMSUs.
TLNKACTV
• For SAAL class links, thetime the link is active andgiving MSUs to SAAL fortransmission.
• For IP7 links, TLNKACTV isbased on 10MB Ethernet linkspeed. Hence the report willbe relative to 10MB/sec.
FTP Reports
FTP Example Output File Name: mtcd-link_20101004_2400.csv
173E86977 Revision 1, July 2017
ReportsMeasurements
FTP Example Output File Format:
"CLLI","SWREL","RPTDATE","RPTIME","TZ","RPTTYPE","RPTPD","IVALDATE","IVALSTART","IVALEND","NUMENTIDS"<cr><lf>"tekelecstp","EAGLE5 44.0.0-64.23.0","2012-02-12","00:14:53","EST ","DAILY MAINTENANCE MEASUREMENTS ON LINK","LAST","2012-02-11","00:00:00","24:00:00",5<cr><lf><cr><lf>"STATUS","LSN","LOC","LINK","LNKTYPE","MSGSTRAN","MSGSRCVD","MSURETRN","OCTRETRN","MOCTTRAN","MOCTRCVD","TDCNGLV1","TDCNGLV2","TDCNGLV3","ECCNGLV1","ECCNGLV2","ECCNGLV3","MSGDISC0","MSGDISC1","MSGDISC2","MSGDISC3","TLNKACTV","LNKAVAIL","ACHGOVRS","NEARMGIH","FARMGINH","NMDCLFLR","DRDCLFLR","SURCVERR","NEGACKS","DRLKINHB","NDCFLABN","NDCFLXDA","NDCFLXER","NDCFLXDC","NMFEPRO","NMLCLPRO","DRFEPRO","DRLCLPRO","MSURCERR","DRBSYLNK","PCRN1N2EXC","SDPDURTR","LMSUTRN","LMSURCV","LMSUOCTTRN","LMSUOCTRCV","LMSUTRNDSC","LMSURCVDSC","M2PUDMTR","M2PUDOCT","M2PUDMRC","M2PUDOCR","M2PLKNIS","ECLNKCB","ECLNKXCO"<cr><lf>"K","hcmimt1","1203","A ","MTP2-UNCH",0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0<cr><lf>"K","ipsg","1103","A ","IPVL",0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0<cr><lf>"K","mtp2","1104","A ","MTP2",0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0<cr><lf>"K","ssedcm1","1105","A ","IPVHSL",0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1281,0,0<cr><lf>"K","saal","1112","A ","SAAL",0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0<cr><lf>
Assuming each data line will be:
4 char status + 13 char LSN + 7 char LOC + 6 char LINK + 12 char LKNTYPE + 51*(6 char data) + 2 =350 char
Table 63: Typical File Size: mtcd-link.csv
File Size=Report data+Reportheader+System
header
175,855 bytes=175,000+605+250
LNKSET MTCD Report
Command Examples
• FTP example command:
rept-ftp-meas:type=mtcd:enttype=lnkset
174E86977 Revision 1, July 2017
ReportsMeasurements
Measurement Events
Table 64: Daily Maintenance (MTCD) and Day-to-Hour Maintenance (MTCDTH) LinksetMeasurements
UnitDescriptionEvent Name
peg countThe total number of times that aGTT translation matched a
SCCPLOOP
Point Code in the STP’s loopsetentries resulting in either a notifyor discard of an SCCP message.
statusIndication of Data Validity:STATUS
K indicates good dataI indicates incompleteintervalN indicates data not current
peg countTranslation Type MappingTranslation Performed - MSUs
ZTTMAPI
Received on the Gateway Linkset- The total number of TranslationType Mapping translationsperformed for incoming MessageSignal Units (MSUs) received onthe specified linkset.
peg countTranslation Type MappingTranslation Performed - MSUs
ZTTMAPO
Transmitted on the GatewayLinkset - The total number oftranslations performed onoutgoing Message Signal Units(MSUs) for the specified linkset.
FTP Reports
FTP Example Output File Name: mtcd-lnkset_20101004_2400.csv
FTP Example Output File Format:
"CLLI","SWREL","RPTDATE","RPTIME","TZ","RPTTYPE","RPTPD","IVALDATE","IVALSTART","IVALEND","NUMENTIDS"<cr><lf>"tekelecstp","EAGLE5 44.0.0-64.23.0","2012-02-12","00:28:19","EST ","DAILY MAINTENANCE MEASUREMENTS ON LNKSET","LAST","2012-02-11","00:00:00","24:00:00",5<cr><lf>
"STATUS","LSN","LNKTYPE","ZTTMAPO","ZTTMAPI","SCCPLOOP"<cr><lf>"K","mtp2","MTP2",0,0,0<cr><lf>"K","ipsg","IPVL",0,0,0<cr><lf>"K","ssedcm1","IPVHSL",0,0,0<cr><lf>
175E86977 Revision 1, July 2017
ReportsMeasurements
"K","saal","SAAL",0,0,0<cr><lf>"K","hcmimt1","MTP2-UNCH",0,0,0<cr><lf>
Assuming each data line will be:
4 char status + 13 char LSN + 12 char LNKTYPE + 3*(6 char data) + 2 = 49 chars
Table 65: Typical File Size: mtcd-lnkset.csv
File Size=Report data+Reportheader+System
header
24,808 bytes=24,500+58+250
LNP MTCD Report
The enttype=lnp entity generates four separate reports per period. The command example will generatethe following daily reports:
• Daily LNP System Wide Measurements
• Daily LNP Measurements Per SSP
• Daily LNP Measurements Per LRN
• Daily LNP Measurements Per NPA
LNP reports are supported only by the FTP reporting capability.
For LNP_SYS and LNP_SSP reports, reports status relies on all SCCP cards regardless of the databasetype (i.e., RTDB/EPAP or RIDB/ELAP) in the system.
For LRN and LNP_NPA_NXX reports, ELAP SM cards are considered, which is the total number ofSCCP cards that are IS-NR connected to an ELAP database.
If any of the above cards are ISOLATED/OOS during a measurement interval, the respective reportis marked I. The report is marked K only when all the cards under consideration are IS_NR throughoutthe measurement interval.
Example Command: rept-ftp-meas:type=mtcd:enttype=lnp[:day=xxx:period=specific]
Table 66: Daily Maintenance (MTCD) and Hourly Maintenance (MTCH) LNP System WideMeasurements
UnitDescriptionEvent Name
peg countTrigger BasedLNPQRCV
The total number of queriesreceived by LNPQS.
peg countTriggerless
Number of encapsulated IAMmessages received by LNPQS
176E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
peg countTrigger BasedLNPQDSC
The number of invalid queriesthat are discarded because noreply can be generated.
not applicableTriggerless
All invalid IAM messages arerouted without LNP;LNPQTCPE is pegged.
peg countTrigger BasedLNPQTCPE
The number of error replies withTCAP error codes.
peg countTriggerless
The number of invalidencapsulated IAM messagesreceived by LNPQS. Note thatthese messages are routed totheir destinations with no LNPlookup.
peg countTrigger BasedLNPSREP
The number of successful replies.
peg countTriggerless
The number of successful IAMmessages.
peg countTrigger BasedLNPQUNPA
The number of correct queriesreceived for non-ported DNwhen NPA-NXX is notprovisioned.
peg countTriggerless
The number of correctencapsulated IAM messagesreceived for a non-ported DN,when the NPA-NXX is notprovisioned.
statusIndication of Data Validity:STATUS
K indicates good dataI indicates incompleteinterval
177E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
N indicates data not current
Table 67: Daily Maintenance (MTCD) and Hourly Maintenance (MTCH) LNP Per SSP Measurements
UnitDescriptionEvent Name
peg countTrigger BasedSSPQRCV
Number of correct queriesreceived per originating SSP.
peg countTriggerless
The number of correctencapsulated IAM messagesreceived by LNPQS per OPC.
peg countNumber of valid CLASS GTTreceived per originating SSP.
CLASSGTRQ
peg countNumber of valid LIDB GTTreceived per originating SSP.
LIDBGTRQ
peg countNumber of correct queriesreceived for ported TNs, peroriginating SSP.
SSPQRCVP
peg countNumber of correct queriesreceived for non-ported TNs, peroriginating SSP.
SSPQRCVNP
peg countNumber of CLASS Global TitleTranslation received for portedTNs, per originating SSP.
CLASSGTRQP
peg countNumber of CLASS Global TitleTranslation received for
CLASSGTRQNP
non-ported TNs, per originatingSSP.
peg countNumber of LIDB Global TitleTranslation received for portedTNs, per originating SSP.
LIDBGTRQP
peg countNumber of LIDB Global TitleTranslation received for
LIDBGTRQNP
non-ported TNs, per originatingSSP.
peg countNumber of CNAM Global TitleTranslation received for portedTNs, per originating SSP.
CNAMGTRQP
178E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
peg countNumber of CNAM Global TitleTranslation received for
CNAMGTRQNP
non-ported TNs, per originatingSSP.
peg countNumber of ISVM Global TitleTranslation received for portedTNs, per originating SSP.
ISVMGTRQP
peg countNumber of ISVM Global TitleTranslation received for
ISVMGTRQNP
non-ported TNs, per originatingSSP.
peg countNumber of WSMSC Global TitleTranslations received for portedTNs, per originating SSP
WSMSCGTRQP
peg countNumber of WSMSC Global TitleTranslations received for
WSMSCGTRQNP
non-ported TNs, per originatingSSP
statusIndication of Data Validity:STATUS
K indicates good dataI indicates incompleteintervalN indicates data not current
textThe TYPE of the point code.Valid values are ANSI, ITUI,ITUN, and ITUN24.
PC TYPE
The following equations apply:
SSPQRCV = SSPQRCVP + SSPQRCVNP
CLASSGTRQ = CLASSGTRQP + CLASSGTRQNP
LIDBGTRQ = LIDBGTRQP + LIDBGTRQNP
Table 68: Daily Maintenance (MTCD) and Hourly Maintenance (MTCH) LNP LRN Measurements
UnitDescriptionEvent Name
peg countTrigger BasedLRNQRCV
The number of correct queriesreceived per LRN.
peg countTriggerless
179E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
The number of correctencapsulated IAM messagesreceived per LRN.
statusIndication of Data Validity:STATUS
K indicates good dataI indicates incompleteintervalN indicates data not current
Table 69: Daily Maintenance (MTCD) and Hourly Maintenance (MTCH) LNP NPA Measurements
UnitDescriptionEvent Name
peg countThe number of correct queriesreceived per NPANXX fornon-ported DN.
NPAQRCV
statusIndication of Data Validity:STATUS
K indicates good dataI indicates incompleteintervalN indicates data not current
FTP Reports
Daily LNP System Wide Measurements
FTP Example Output File Name: mtcd-lnp_19990116_2400.csv
FTP Example Output File Format:
"CLLI","SWREL","RPTDATE","RPTIME","TZ","RPTTYPE","RPTPD","IVALDATE","IVALSTART","IVALEND","NUMENTIDS"<cr><lf>"tekelecstp","34.0.0-39.1.0","1999-01-17","15:51:37","EST","DAILY MAINTENANCE MEASUREMENTS ON LNP SYSTEM","LAST","1999-01-16","00:00:00","24:00:00",1<cr><lf><cr><lf>"STATUS","LNPQRCV","LNPQDSC","LNPQTCPE","LNPSREP","LNPQUNPA"<cr><lf>"K",429496729,429496729,429496729,429496729,429496729<cr><lf>
Typical file size is:
180E86977 Revision 1, July 2017
ReportsMeasurements
Table 70: Typical File Size: mtcd-lnp.csv
File Size=Report dataReportheader
Systemheader
347 bytes=34+63+250
Daily LNP Measurements Per SSPFTP Example Output File Name:mtcd-ssp_19990116_2400.csv
FTP Example Output File Format:
"CLLI","SWREL","RPTDATE","RPTIME","TZ","RPTTYPE","RPTPD","IVALDATE","IVALSTART","IVALEND","NUMENTIDS"<cr><lf>"tekelecstp","34.0.0-39.1.0","1999-01-17","15:51:37","EST","DAILY MAINTENANCE MEASUREMENTS ON LNPSSP","LAST","1999-01-16","00:00:00","24:00:00",200<cr><lf><cr><lf>"STATUS","SSP","PC_TYPE","SSPQRCV","CLASSGTRQ","LIDBGTRQ","SSPQRCVP","SSPQRCVNP","CLASSGTRQP","CLASSGTRQNP","LIDBGTRQP","LIDBGTRQNP","CNAMGTRQP","CNAMGTRQNP","ISVMGTRQP","ISVMGTRQNP","WSMSCGTRQP","WSMSCGTRQNP"<cr><lf>"K","002-002-100","ANSI",123456789,456789,99999,123456789,456789,99999,123456789,456789,99999,123456789,456789,99999,123456789,456789,99999<cr><lf>. . . . ."K","002-005-123","ANSI",123456789,456789,99999,123456789,456789,99999,123456789,456789,99999,123456789,456789,99999,123456789,456789,99999<cr><lf>
Assuming each data line will be:
4 char status + 14 char SSP + 10 char PC type+ 15*(6 char data) + 2 = 120 chars
For a report of 200 SSPs, the typical file size is:
Table 71: Typical File Size: mtcd-ssp.csv
File Size=Report data+Reportheader+System
header
24410 bytes=24000+160+250
Daily LNP Measurements Per LRNFTP Example Output File Name:mtcd-lrn_19990116_2400.csv
FTP Example Output File Format:
"CLLI","SWREL","RPTDATE","RPTIME","TZ","RPTTYPE","RPTPD","IVALDATE","IVALSTART","IVALEND","NUMENTIDS"<cr><lf>"tekelecstp","34.0.0-39.1.0","1999-01-17","15:51:37","EST","DAILY MAINTENANCE MEASUREMENTS ON LNP LRN","LAST","1999-01-16","00:00:00","24:00:00",600<cr><lf><cr><lf>"STATUS","LRN","LRNQRCV"<cr><lf>"K",9194560000,123456789<cr><lf>"K",4087550001,23456789<cr><lf>"K",5155550000,456789<cr><lf>. . . . ."K",3022330001,345<cr><lf>
181E86977 Revision 1, July 2017
ReportsMeasurements
"K",7032110002,99999<cr><lf>"K",8123048059,4294967295<cr><lf>
Assuming each data line will be:
4 char status + 11 char LRN + 6 char data + 2 = 23 chars
For a report of 600 LRNs, the typical file size is:
Table 72: Typical File Size: mtcd-lrn.csv
Report data+Reportheader+System
header
14077 bytes=13800+27+250
Daily LNP Measurements Per NPAFTP Example Output File Name:mtcd-npa_19990116_2400.csv
FTP Example Output File Format:
"CLLI","SWREL","RPTDATE","RPTIME","TZ","RPTTYPE","RPTPD","IVALDATE","IVALSTART","IVALEND","NUMENTIDS"<cr><lf>"tekelecstp","34.0.0-39.1.0","1999-01-17","15:51:37","EST","DAILY MAINTENANCE MEASUREMENTS ON LNP NPANXX","LAST","1999-01-16","00:00:00","24:00:00",600<cr><lf><cr><lf>"STATUS","NPANXX","NPAQRCV"<cr><lf>"K",919456,123456789<cr><lf>"K",408755,23456789<cr><lf>"K",515555,456789<cr><lf>. . . . ."K",302233,345<cr><lf>"K",703211,99999<cr><lf>"K",812304,4294967295<cr><lf>
Assuming each data line will be:
4 char status + 7 char NPANXX + 6 char data + 2 = 19 chars
For a report of 600 LRNs, the typical file size is:
Table 73: Typical File Size: mtcd-npa.csv
File Size=Report data+Reportheader+System
header
11680 bytes=11400+30+250
NP MTCD Report
The daily Number Portability measurements specify the entity type NP (enttype=np) which generatestwo separate reports per period. The command example will generate the following daily reports:
• Daily System Wide Measurements
182E86977 Revision 1, July 2017
ReportsMeasurements
• Daily Measurements Per SSP
NP_SSP and NP_SYS reports consider system-wide SCCP cards regardless of the database type (i.e.,RTDB/EPAP or RIDB/ELAP) in the system.
If any of the above cards are ISOLATED/OOS during a measurement interval, the respective reportis marked I. The report is marked K only when all the cards under consideration are IS_NR throughoutthe measurement interval.
Command Examples
• FTP
rept-ftp-meas:type=mtcd:enttype=np[:period=specific:day=xxx]
Measurement Events
• System Wide Measurements
indicates system registers that may be pegged. Register counts for features not turned on willalways be zero.
Table 74: Daily Maintenance (MTCD) and Hourly Maintenance (MTCH) System-Wide Registers
UnitDescriptionEvent Name
peg countNumber of SMSREQ messagesresulting in error.
APSMRQERR
peg countNumber of SMSREQ messagesresulting in SMSREQ_ACK orSMSREQ_NACK.
APSMRQREP
peg countNumber of SMS Requestmessages received.
APSMSRCV
peg countNumber of SMS Requestmessages relayed.
APSMSREL
Peg CountNumber of non-call relatedmessages relayed by G-Port.
GPNOCL
Peg CountNumber of non-call relatedmessages that fell through toGTT.
GPNOCLGT
Peg CountNumber of call relatedmessages that cause an error
GPSRERR
response message(SRI-SendRouting InformationNEGATIVE ACK) because ofG-Port service failure. This doesnot include peg counts toregister GPSRERRPP.
183E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
Peg CountNumber of call related(SRI-Send Routing Information)
GPSRREPPP
messages that received G-Portservice specifically for feature:G-Port SRI query for Prepaid.This does not include pegcounts to register GPSRREP.
Peg CountNumber of call related(SRI-Send Routing Information)
GPSRGTT
messages that fell through toGTT. This does not include pegcounts to register GPSRGTTPP.
Peg CountNumber of call related(SRI-Send Routing Information)
GPSRGTTPP
messages that fell through toGTT specifically for feature:G-Port SRI query for Prepaid.This does not include pegcounts to register GPSRGTT.
Peg CountNumber of call related(SRI-Send Routing Information)
GPSRRCV
messages received. This doesnot include peg counts toregister GPSRRCVPP.
Peg CountNumber of call related(SRI-Send Routing Information)
GPSRRCVPP
messages received specificallyfor feature: G-Port SRI queryfor Prepaid. This does notinclude peg counts to registerGPSRRCV.
Peg CountNumber of call related(SRI-Send Routing Information)
GPSRREP
messages that received G-Portservice. This does not includepeg counts to registerGPSRREPPP.
Peg CountNumber of call relatedmessages that cause an error
GPSRERRPP
response message (SRI-SendRouting InformationNEGATIVE ACK) specificallyfor feature: G-Port SRI queryfor Prepaid. This does not
184E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
include peg counts to registerGPSRERR.
peg countNumber of SRI_SM messagesresulting in error.
GPSRSMERR
peg countNumber of SRI_SM messagesreceived.
GPSRSMRCV
peg countNumber of SRI_SM messagesresulting in SRI_SM_ACK orSRI_SM_NACK.
GPSRSMREP
peg countNumber of invalid queries thatare discarded as no reply canbe generated.
INPQDSC
peg countNumber of total queriesreceived by INPQS.
INPQRCV
peg countNumber of queries received byINPQS that meet the conditionfor circular route detection.
INPQSCRD
peg countNumber of error replies withTCAP error code.
INPQTCPE
peg countNumber of successful replies toINP non-queried queries. These
INPSREP
replies will be either INPConnect, INP Continue, or INPReleaseCall (every time anINAP RELEASECALL responseis generated due to circularroute dection by INPQS).
peg countNumber of IS-41 locationrequest - error responsemessages sent.
IS41LRERR
peg countNumber of IS-41 locationrequest messages received
IS41LRMRCV
peg countNumber of IS-41 locationrequest - return result messagessent
IS41LRRTRN
peg countNumber of times CircularRoute is Detected
MNPCRD
peg countNumber of MO_SMS messagesreceived that result in an error
SMSMOGERR
185E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
peg countNumber of MO_SMS messagesreceived that result in a
SMSMOGRCV
modification of the outgoingMO_SMS
peg countNumber of SMDPP messagesreceived that result in an error
SMSMOIERR
peg countNumber of SMDPP messagesreceived that result in a
SMSMOIRCV
modification of the outgoingSMDPP.
statusIndication of Data Validity:STATUS
K indicates good dataI indicates incompleteintervalN indicates data not current
peg countTotal number of MSUsprocessed by TIF and
TIFFPFXRLS
blacklisted by the FPFXRLSService Action
peg countTotal number of MSUsprocessed by TIF and
TIFNFNDRLS
blacklisted by the BLNFNDRLSService Action
peg countTotal number of MSUsprocessed by TIF and
TIFNOCGRLS
blacklisted by theNOCGPNRLS Service Action
peg countTotal number of MSUsprocessed by TIF and
TIFRLS
blacklisted by the BLRLSService Action
peg countNumber of MSUs processed byTIF and found to be blacklistedby SELSCR Service Action
TIFSSCRRLS
peg countNumber of MSUs processed byTIF and relayed by SELSCRService Action
TIFSSCRRLY
peg countNumber of IAM messagesreceived that required TIF
TINPERR
186E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
processing but resulted inexecution of an error case.
peg countNumber of IAM messagesreceived that required TIF
TINPMGEN
processing and resulted in themodification of the IAMmessage or the generation of aREL message.
peg countNumber of IAM messagesreceived that require TIFprocessing.
TINPMRCV
The following equations apply:
INPQRCV = INPQDSC + INPQTCPE + INPSREP
GPSRRCV = GPSRGTT + GPSRREP + GPSRERR
GPSRRCVPP = GPSRGTTPP + GPSRREPPP + GPSRERRPP
GPSRSMRCV = GPSRSMREP + GPSRSMERR
• Per SSP Measurements
These measurements are available on a per SSP PC basis where SSP PC is the CGPA PC, if it exists,or it is the MTP OPC.
Table 75: Daily Maintenance (MTCD) and Hourly Maintenance (MTCH) SSP Registers
UnitDescriptionEvent Name
peg countNumber of call relatedLOCREQ messagesacknowledged.
APLRACK
peg countNumber of call relatedLOCREQ messages relayed.
APLRRLY
peg countNumber of non-callnon-LOCREQ related messagesrelayed.
APNOCL
peg countNumber of non-callnon-LOCREQ related messagesthat fell through to GTT.
APNOCLGT
peg countNumber of SMSREQ messagesresulting in error.
APSMRQERR
187E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
peg countNumber of SMSREQ messagesresulting in SMSREQ_ACK orSMSREQ_NACK
APSMRQREP
peg countNumber of SMSREQ messagesreceived
APSMSRCV
peg countNumber of non-call relatedmessages relayed by G-Port.
GPNOCL
peg countNumber of non-call relatedmessages that fell through toGTT.
GPNOCLGT
peg countNumber of call related(SRI-Send Routing Information
GPSRACK
ACK) responses. This does notinclude peg counts to registerGPSRACKPP.
peg countNumber of call related(SRI-Send Routing Information
GPSRACKPP
ACK) responses specifically forfeature 61544: G-Port SRI queryfor Prepaid. This does notinclude peg counts to registerGPSRACK.
peg countNumber of call related SRINegative ACK responses in
GPSRNACK
case of successful G-Portservice.
peg countNumber of call related(SRI-Send Routing Information)messages relayed.
GPSRRLY
peg countNumber of SRI_SM messagesresulting in error.
GPSRSMERR
peg countNumber of SRI_SM messagesreceived.
GPSRSMRCV
peg countNumber of SRI_SM messagesresulting in SRI_SM_ACK orSRI_SM_NACK
GPSRSMREP
peg countNumber of messages sent toMR service that fall through to
INPMRCRD
GTT due to circular routedetection.
188E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
peg countNumber of messages sent toMR service that fall through to
INPMRGTT
GTT. This includes the numberof messages sent to MR servicethat fall through to GTT due tocircular route detection.
peg countNumber of messages sent toMR service that receive MRtranslation.
INPMRTR
peg countNumber of non-erroredQSmessages with QS Connectresponses, per originating SSP.
INPQSCONN
peg countNumber of non-errored QSmessages with QS Continueresponses, per originating SSP.
INPQSCONT
peg countNumber of messages sent toINP QS that meet the conditionfor circular route detection.
INPQSCRD
peg countNumber of messages sent toINP QS that result in successful
INPQSREL
generation of INAPRELEASECALL response dueto circular route detection byINPQS.
peg countNumber of times CircularRoute is Detected.
MNPCRD
textTYPE of the point code. Validvalues are ANSI, ITUI, ITUN,and ITUN24.
PC Type
peg countNumber of MO_SMS messagesreceived that result in an error
SMSMOGERR
peg countNumber of MO_SMS messagesreceived that result in a
SMSMOGRCV
modification of the outgoingMO_SMS
peg countNumber of SMDPP messagesreceived that result in an error
SMSMOIERR
peg countNumber of SMDPP messagesreceived that result in a
SMSMOIRCV
modification of the outgoingSMDPP
189E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
statusIndication of Data Validity:STATUS
K indicates good dataI indicates incompleteintervalN indicates data not current
peg countTotal number of MSUsprocessed by TIF and
TIFRANGEBL
blacklisted by the FPFXRLS orNOCGPNRLS Service Action
peg countTotal number of MSUsprocessed by TIF and found to
TIFSBSCRBL
be blacklisted by BLRLS orBLNFNDRLS Service Actions
peg countNumber of IAM messagesprocessed by TIF which
TIFSELSCR
resulted in either an ISUPmessage generation or the MSUbeing relayed by SELSCRService Action
peg countNumber of IAM messagesreceived that required TIF
TINPERR
processing but resulted inexecution of an error case.
peg countNumber of IAM messagesreceived that required TIF
TINPMGEN
processing and resulted in themodification of the IAMmessage or the generation of aREL message.
peg countNumber of IAM messagesreceived that require TIFprocessing.
TINPMRCV
The following equation applies to NP registers:
GPSRREP = ∑GPSRACK + ∑GPSRRLY+ ∑GPSRNACK
FTP Reports
• Daily System Wide Measurements
FTP Example Output File Name:mtcd-np_20080125_2400.csv
190E86977 Revision 1, July 2017
ReportsMeasurements
FTP Example Output File Format:
"CLLI","SWREL","RPTDATE","RPTIME","TZ","RPTTYPE","RPTPD","IVALDATE","IVALSTART","IVALEND","NUMENTIDS""e1061001","EAGLE5 42.0.0-63.33.0","2010-08-20","00:00:57","EST ","DAILY MAINTENANCE MEASUREMENTS ON NP SYSTEM","LAST","2010-08-19","00:00:00","24:00:00",1
"STATUS","INPQRCV","INPQDSC","INPQTCPE","INPSREP","GPSRRCV","GPSRGTT","GPSRREP","GPSRERR","GPNOCL","GPNOCLGT","IS41LRERR","IS41LRMRCV","IS41LRRTRN","GPSRRCVPP","GPSRGTTPP","GPSRREPPP","GPSRERRPP","APSMSRCV","APSMSREL","TINPMRCV","TINPMGEN","TINPERR","SMSMOIRCV","SMSMOIERR","SMSMOGRCV","SMSMOGERR","GPSRSMREP","GPSRSMERR","GPSRSMRCV","APSMRQREP","APSMRQERR","INPQSCRD","MNPCRD""K",0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,
Assuming each data line will be: 4 char status + 33 * (6 char data) + 2 = 204 chars
Typical file size is:
Table 76: Typical File Size: mtcd-np.csv
File Size=Report data+Reportheader+System
header
832 bytes=204+378+250
• Daily Measurements Per SSP
Table 77: FTP Daily Maintenance (MTCD) SSP Column Header
DescriptionField Name
Service switching point codeSSP
FTP Example Output File Name: mtcd-ssp_20080125_2400.csv
FTP Example Output File Format:
"CLLI","SWREL","RPTDATE","RPTIME","TZ","RPTTYPE","RPTPD","IVALDATE","IVALSTART","IVALEND","NUMENTIDS""e1061001","EAGLE5 42.0.0-63.33.0","2010-08-20","00:00:58","EST ","DAILYMAINTENANCE MEASUREMENTS ON NP SSP","LAST","2010-08-19","00:00:00","24:00:00",3"STATUS","SSP","PC_TYPE","INPQSCONN","INPQSCONT","INPMRTR","INPMRGTT","GPSRACK","GPSRRLY","GPNOCL","GPNOCLGT","GPSRACKPP","APLRACK","APLRRLY","APNOCL","APNOCLGT","TINPMRCV","TINPMGEN","TINPERR","SMSMOIRCV","SMSMOIERR","SMSMOGRCV","SMSMOGERR","GPSRSMREP","GPSRSMERR","GPSRSMRCV","APSMRQREP","APSMRQERR","APSMSRCV","INPQSCRD","INPQSREL","INPMRCRD","MNPCRD","GPSRNACK""K"," 001-001-001","ANSI",0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,"K"," 101-001-001","ANSI",0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,"K"," 201-001-001","ANSI",0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,
Assuming each data line will be: 4 char status + 14 char SSP + 10 char PC type + 31 * (6 char data)+ 2 = 216 chars
Typical file size is:
191E86977 Revision 1, July 2017
ReportsMeasurements
Table 78: Typical File Size: mtcd-ssp.csv
File Size=Report data+Reportheader+System
header
606 + ( 216 *#Point
=(216 * #PointCodes )
+356+250
Codes )bytes
For a report of 200 SSPs, typical file size is:
Table 79: Typical File Size: mtcd-ssp.csv
File Size=Report data+Reportheader+System
header
43806 bytes=(216 * 200 )+356+250
STPLAN MTCD Report
Example Commands:
UI: rept-meas:type=mtcd:enttype=stplan
FTP: rept-ftp-meas:type=mtcd:enttype=stplan
Table 80: Daily Maintenance (MTCD) and Day-to-Hour Maintenance (MTCDTH) STPLANMeasurements
UnitDescriptionEvent Name
peg countEthernet Alignment Error -Number of packets not received
ENETALNERR
over the STPLAN interfacebecause of ethernet alignmenterrors.
peg countEthernet Bus Busy - Number oftransmissions attempted when
ENETBUSBSY
the STPLAN ethernet bus wasbusy.
peg countEthernetCRC Error - Number ofpackets not received on the
ENETCRCERR
STPLAN ethernet due to CRCerrors.
peg countEthernet Collision Error -Number of packets not
ENETCOLERR
192E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
transmitted by STPLAN becauseof excessive collisions on theSTPLAN ethernet bus.
peg countEthernet Octets Received - Thetotal number of octets received
ENETOCTRCV
on the STPLAN ethernetinterface.
peg countEthernet Octets Transmitted -The total number of octets
ENETOCTXMT
transmitted on the STPLANethernet interface.
peg countEthernet Receive BufferOverflow Errors -
ENETOVRERR
Number of packets not receivedby STPLAN because of a receivebuffer overflow.
peg countIP Address Error- The totalnumber of inbound IP
IPADDRERR
datagrams discarded on theSTPLAN interface due to a baddestination address.
peg countIP Header Errors - The totalnumber of inbound IP
IPHDRERR
datagrams discarded on theSTPLAN interface due to headererrors.
peg countIP Protocol Error - Number ofinbound IP datagrams discarded
IPPROTERR
by STPLAN due to an error inthe packet (invalid protocol).
peg countSTPLAN Discarded 1 - Numberof SLAN MSUs discarded by the
SLANDISC1
LIM cards for STPLAN featuredisabled and records aging offof the local queue.
peg countSTPLAN Discarded 2 - Numberof SLAN MSUs discarded by the
SLANDISC2
SLAN cards for networkproblems and unreachable farend servers. During networkoutages, the SLAN cards willstop TVG/MFC grants or go into
193E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
flow control. This causes thePDUs to be queued on the LIMcards, so the majority of discardswill be pegged on SLANDISC1under these circumstances.
msecsSTPLAN Disabled - Theduration that the STPLAN
SLANDSBLD
screening/copy feature wasdisabled.
peg countSTPLAN Screened - Number ofMSUs that were copied to the
SLANSCRND
STPLAN interface after passinggateway screening.
peg countSTPLAN Transmit - Number ofMSUs sent to the hostdestination.
SLANXMIT
statusIndication of Data Validity:STATUS
K indicates good dataI indicates incompleteintervalN indicates data not current
peg countTCP Connections Failed - Thetotal number of TCP connections
TCPCONNFLD
that have failed on the STPLANinterface.
peg countTCP Receive Error - The totalnumber of TCP segments
TCPRCVERR
received on the STPLANinterface in error.
peg countTCP Reset Sent - The totalnumber of TCP segments sent
TCPRSTSENT
containing the reset (RST) flagon the STPLAN interface.
peg countTCP Segment Received - Thetotal number of TCP segments
TCPSEGRCVD
received on the STPLANinterface.
peg countTCP Segment Sent - The totalnumber of TCP segments senton the STPLAN interface.
TCPSEGSENT
194E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
peg countTCP Segment Retransmitted -The total number of TCP
TCPSEGXMT2
segments retransmitted on theSTPLAN interface.
UI Example Output:
tekelecstp 01-08-18 00:00:21 EST EAGLE 34.0.0 TYPE OF REPORT: DAILY MAINTENANCE MEASUREMENTS ON STPLAN REPORT PERIOD: LAST REPORT INTERVAL: 01-08-17 00:00:00 THRU 23:59:59 STPLAN-MTCD MEASUREMENTS SLANDSBLD = 0, SLANDISC1 = 0, SLANDISC2 = 0, SLANSCRND = 0, SLANXMIT = 0, ENETALNERR = 0, ENETCRCERR = 0, ENETCOLERR = 0, ENETBUSBSY = 0, ENETOVRERR = 0, ENETOCTXMT = 0, ENETOCTRCV = 0, TCPCONNFLD = 0, TCPSEGRCVD = 0, TCPSEGSENT = 0, TCPSEGXMT2 = 0, TCPRCVERR = 0, TCPRSTSENT = 0, IPHDRERR = 0, IPADDRERR = 0, IPPROTERR = 0; tekelecstp 01-08-18 00:00:22 EST EAGLE 34.0.0 END OF DAILY STPLAN-MTCD MEASUREMENT REPORT;
FTP Example Output File Name: mtcd-stplan_19990116_2400.csv
FTP Example Output File Format:
"CLLI","SWREL","RPTDATE","RPTIME","TZ","RPTTYPE","RPTPD","IVALDATE","IVALSTART","IVALEND","NUMENTIDS"<cr><lf>"tekelecstp","34.0.0-39.1.0","1999-01-17","15:51:37","EST","DAILY MAINTENANCE MEASUREMENTS ON STPLAN","LAST","1999-01-16","00:00:00","24:00:00",1<cr><lf><cr><lf>"STATUS","SLANDSBLD","SLANDISC1","SLANDISC2","SLANSCRND","SLANXMIT","ENETALNERR","ENETCRCERR","ENETCOLERR","ENETBUSBSY","ENETOVRERR","ENETOCTXMT","ENETOCTRCV","TCPCONNFLD","TCPSEGRCVD","TCPSEGSENT","TCPSEGXMT2","TCPRCVERR","TCPRSTSENT","IPHDRERR","IPADDRERR","IPPROTERR"<cr><lf>"K",0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0<cr><lf>
Typical file size is:
Table 81: Typical File Size: mtcd-stplan.csv
File Size=Report data+Reportheader+System
header
651 bytes=130+271+250
195E86977 Revision 1, July 2017
ReportsMeasurements
EIR MTCD Report
The EIR measurements specify the entity type EIR, and generate one daily report. The commands arespecified with xxx as a three-letter abbreviation for a day of the week (MON, TUE, WED, THU, FRI,SAT, or SUN). The retention period for daily measurement records is seven days.
FTP Example Command:
rept-ftp-meas:type=mtcd:enttype=eir[:day=xxxx:period=specific]
Table 82: Daily Maintenance (MCTD) and Hourly Maintenance (MTCH) EIR Measurements lists the EIRevents and their descriptions.
Table 82: Daily Maintenance (MCTD) and Hourly Maintenance (MTCH) EIR Measurements
UnitDescriptionEvent Name
peg countTotal number ofMAP_CHECK_IMEI messagesreceived
IMEIRCV
peg countTotal number of searches thatresulted in a match with a “whitelisted” IMEI
WHITEIMEI
peg countTotal number of searches thatresulted in a match with a “graylisted” IMEI
GRAYIMEI
peg countTotal number of searches thatresulted in a match with a “blacklisted” IMEI
BLACKIMEI
peg countTotal number of searches thatresulted in a match with a “black
BLKALIMEI
listed” IMEI, but were alloweddue to IMSI Check match
peg countTotal number of searches thatresulted in a match with a “black
BLKNALIMEI
listed” IMEI, and the IMSI in thedatabase did not match the IMSIin the message
peg countTotal number of searches thatresulted in a match with an“unknown” IMEI
UNKNIMEI
peg countTotal number of searches thatresulted in no match in thedatabase.
NOMTCHIMEI
196E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
NOMTCHIMEI is peggedwhenever an IMEI is not foundin the database.
statusIndication of Data Validity:STATUS
K indicates good dataI indicates incompleteintervalN indicates data not current
The following equation applies:
IMEIRCV = WHITEIMEI + GRAYIMEI + BLACKIMEI + UNKNIMEI + BLKALIMEI + BLKNALIMEI+ ERRORS
where ERRORS are not pegged in any measurement register and include check_imei queries withresponse type REJECT, RETURN ERROR (IMEI status anything other than unknown and not matched)
FTP Example Output File Name: mtcd-eir_20030816_2400.csv
FTP Example Output File Format:
"CLLI","SWREL","RPTDATE","RPTIME","TZ","RPTTYPE","RPTPD","IVALDATE","IVALSTART","IVALEND","NUMENTIDS"<cr><lf>"tekelecstp","34.0.0-51.1.0","2003-08-17","15:51:37","EST","DAILY MAINTENANCE MEASUREMENTS ON EIR SYSTEM","LAST","2003-08-16", "00:00:00","24:00:00",1<cr><lf><cr><lf>"IMEIRCV","WHITEIMEI","GRAYIMEI","BLACKIMEI","BLKALIMEI","BLKNALIMEI","UNKNIMEI","NOMTCHIMEI"<cr><lf>4294967295,4294967295,4294967295,4294967295,4294967295,4294967295,4294967295, 4294967295<cr><lf>
Typical file size is:
Table 83: Typical File Size: mtcd-eir.csv
File Size=Report dataReportheader
Systemheader
440 bytes=89+95+256
MAPSCRN MTCD Report
The enttype=mapscrn entity generates two separate reports per period.
The command example generates the following daily measurement reports when the GSMMAPScreening feature is activated:
• Daily MAP Screening System Wide Measurements
• Daily MAP Screening Measurements Per Server
197E86977 Revision 1, July 2017
ReportsMeasurements
The command example generates the following daily measurement reports when theGSMMAP/Enhanced GSMMAP Screening feature is activated:
• Daily MAP Screening System Wide Measurements
• Daily MAP Screening Measurements Per Path
All the FTP reports are listed together.
Example Commands:
• FTP: rept-ftp-meas:type=mtcd:enttype=mapscrn
Note: When MTP MAP Screening is enabled and on, the registers in Table 84: Daily Maintenance(MTCD) and Hourly Maintenance (MTCH) MAP Screening System Wide Measurements and Table 87: DailyMaintenance (MTCD) and Hourly Maintenance (MTCH) MAP Screening Per Server Measurements includethe sum total of MTP-routed and GTT-routed messages for the particular event.
Table 84: Daily Maintenance (MTCD) and Hourly Maintenance (MTCH) MAP Screening SystemWide Measurements
UnitDescriptionEvent Name
countTotal number of messages thatPassed MAP screening
MSCRNPASS
countTotal number of messages thatgot Rejected by MAP screening
MSCRNRJNE
because an entry was not foundin the MAP screening table (i.e.,rejected as System wide MAPOpcode action is DISCARD)
countTotal number of messages thatgot Rejected by MAP screening
MSCRNRJFP
due to forbidden parameters inthe message.
countTotal number of messages thatcontained the forbidden
MSCRNPAFP
parameter but were not rejecteddue to Screening action set asPASS.
countTotal number of messages,where an entry was not found in
MSCRNPANE
the MAP screening table but theMessage was not rejected asscreening action was marked asPASS (i.e., not rejected as Systemwide MAP Opcode action isPASS)
198E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
countTotal number of message thatgot rejected as Message MAP
MSCRNRJOP
Opcode was not found in theMAP Opcode table (system wideaction - DISCARD for the nonmatching OPCODEs)
countTotal number of messages thatwere selected by MAP Screening
MSCRNDUP
for the Duplicate screeningaction.
countTotal number of messages thatewere selected by MAP Screeningfor the Forward screening action.
MSCRNFOR
countTotal number of messages thatewere selected by MAP Screening
MSCRNDAD
for the Duplicate and Discardscreening action.
statusIndication of Data Validity:STATUS
K indicates good dataI indicates incompleteintervalN indicates data not current
Server Entity Identification information in Table 85: Server Entity Identification is used to clarify theserver. The Maintenance MAP Screening Per Server Measurements are applicable.
Table 85: Server Entity Identification
DescriptionEntity Name
The screened origination address of the callingparty address (CGPA) assigned when the GSMMAP screen was entered.
SERVER
The screened number plan value (NPV) assignedto the server address when the GSM MAP screen
NP
was entered. This field is filled with the defaultidentifier * if no value was assigned.
The screened nature of address value (NAIV)assigned to the server address when the GSM
NAI
MAP screen was entered. This field is filled withthe default identifier * if no value was assigned.
199E86977 Revision 1, July 2017
ReportsMeasurements
DescriptionEntity Name
The operation code number assigned when theGSM MAP opcode was entered.
OPCODE
Measurements does not report entries created fora range of addresses.
Server Path Entity Identification information in Table 86: Path Entity Identification is used to clarify thepath. The Maintenance MAP Screening Per Path Measurements are applicable.
Table 86: Path Entity Identification
DescriptionEntity Name
The screened origination address of the callingparty address (CGPA-NP-NAI), or a combination
PATH
of screened destination address of the called partyaddress (CDPA-NP-NAI) and the screenedorigination addresses assigned when the GSMMAP screen was entered.
The possible fields within the path are delimitedas follows to allow for efficient sorting:
• When both the origination and destinationaddresses are present (as either single serverentries or provisioned wildcard entries) theorigination address is preceded by a carat (^) andthe destination address is preceded by a "greaterthan" sign (>):
^CGPA-NP-NAI>CDPA-NP-NAI
• When only the origination address is present(occurs when the CDPA is a default wildcard) itis preceded by a "less than" sign (<):
<CGPA-NP-NAI
The calling party global title address assignedwhen the GSM MAP screen was entered. Any or
CGPA
all of the three fields (GTA, NP, NAI) can be filledwith the identifier (*) if a wildcard value isassigned for that field. There is no defaultwildcard value for the CGPA.
The called party global title address assignedwhen the GSM MAP screen was entered. Any or
CDPA
all of the three fields (GTA, NP, NAI) can be filledwith the identifier (*) if a wildcard value isassigned for that field. If the CDPA value is notassigned, the default wildcard value, which is notprinted, is assumed.
200E86977 Revision 1, July 2017
ReportsMeasurements
DescriptionEntity Name
The screened number plan value (NPV) assignedto the path address when the GSM MAP screen
NP
was entered. The identifier (*) is used to signify awildcard NP.
The screened nature of address value (NAIV)assigned to the path address when the GSM MAP
NAI
screen was entered. The identifier (*) is used tosignify a wildcard NAI.
The operation code number assigned when theGSM MAP opcode was entered. The identifier (*)is used to signify a wildcard opcode.
OPCODE
Note:
Measurements does not report entries created for a range of addresses.
Measurements does not report default wildcard CDPA address in entries containing them.
There can never be a default wildcard CGPA entry. All wildcard CGPA entries must be explicitlyprovisioned. There can never be an entry with only a CDPA path listed.
The string formats were designed to allow efficient automated post processing of measurementsreports. A brief note explaining the format is included in the report.
Table 87: Daily Maintenance (MTCD) and Hourly Maintenance (MTCH) MAP Screening Per ServerMeasurements
UnitDescriptionEvent Name
countTotal number of messages thatPassed MAP screening
MSCRNPASS
countTotal number of messages thatgot Rejected by MAP screening
MSCRNRJFP
due to forbidden parameters inthe message.
countTotal number of messages perserver that were selected by
MSCRNDUP
MAP Screening for the Duplicatescreening action.
countTotal number of messages perserver that were selected by
MSCRNFOR
MAP Screening for the Forwardscreening action.
countTotal number of messages perserver that were selected by
MSCRNDAD
201E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
MAP Screening for the Duplicatescreening action.
countTotal number of messages thatcontained the forbidden
MSCRNPAFP
parameter but were not rejecteddue to Screening action set asPASS.
statusIndication of Data Validity:STATUS
K indicates good dataI indicates incompleteintervalN indicates data not current
FTP Reports
Daily MAP Screening System Wide Measurements
FTP Example Output File Name: mtcd-map_19990116_2400.csv
FTP Example Output File Format:
"CLLI","SWREL","RPTDATE","RPTIME","TZ","RPTTYPE","RPTPD","IVALDATE","IVALSTART","IVALEND","NUMENTIDS""e1061001","EAGLE5 42.0.0-63.33.0","2010-08-21","00:00:58","EST ","DAILY MAINTENANCE MEASUREMENTS ON MAPSCRN SYSTEM","LAST","2010-08-20","00:00:00","24:00:00",1
"STATUS","MSCRNPASS","MSCRNRJOP","MSCRNRJNE","MSCRNRJFP","MSCRNPAFP","MSCRNPANE","MSCRNFOR","MSCRNDUP","MSCRNDAD""K",0,0,0,0,0,0,0,0,0,
Typical file size is:
Table 88: Typical File Size: mtcd-map.csv
File Size=Report data+Reportheader+System
header
426 bytes=60+116+250
Daily MAP Screening Measurements Per Path
FTP Example Output File Name: mtcd-path_19990116_2400.csv
FTP Example Output File Format:
"CLLI","SWREL","RPTDATE","RPTIME","TZ","RPTTYPE","RPTPD","IVALDATE","IVALSTART","IVALEND","NUMENTIDS""e1061001","EAGLE5 42.0.0-63.33.0","2010-08-21","00:00:59","EST ","DAILY MAINTENANCE MEASUREMENTS ON MAPSCRN
202E86977 Revision 1, July 2017
ReportsMeasurements
PER-SERVER","LAST","2010-08-20","00:00:00","24:00:00",11
"For a path containing CGPA only, PATH-OPCODE = <CGPA-NP-NAI-OPCODE""For a path containing both CGPA and CDPA, PATH-OPCODE = ^CGPA-NP-NAI>CDPA-NP-NAI-OPCODE"
"STATUS","PATH-OPCODE","MSCRNPASS","MSCRNRJFP","MSCRNFOR","MSCRNDUP","MSCRNDAD","MSCRNPAFP""K","<123456789012345-*-*-0",0,0,0,0,0,0"K","<234567890123456-*-*-0",0,0,0,0,0,0"K","<345678901234567-*-*-0",0,0,0,0,0,0"K","<456789012345678-*-*-0",0,0,0,0,0,0"K","<567890123456789-*-*-0",0,0,0,0,0,0"K","<678901234567890-*-*-0",0,0,0,0,0,0"K","<789012345678901-*-*-0",0,0,0,0,0,0"K","<123456789012345-*-*-1",0,0,0,0,0,0"K","<234567890123456-*-*-1",0,0,0,0,0,0"K","<345678901234567-*-*-1",0,0,0,0,0,0"K","<456789012345678-*-*-1",0,0,0,0,0,0
Assuming each data line will be:
4 char status + 40 char PATH-OPCODE + 6*(6 char data) + 2 = 82 chars
For a report of 20 paths, the typical file size is:
Table 89: Typical File Size: mtcd-path.csv
File Size=Report data+Reportheader+System
header
2141 bytes=1640+251+250
SCTPASOC MTCD Report
Command Examples
• UI:rept-meas:type=mtcd:enttype=sctpasoc:aname=assoc1
• FTP:rept-ftp-meas:type=mtcd:enttype=sctpasoc
Measurement Events
Table 90: Daily Maintenance (MTCD) and Day-to-Hour (MTCDTH) SCTPASOC Measurements lists theSCTPASOC events and their descriptions.
Table 90: Daily Maintenance (MTCD) and Day-to-Hour (MTCDTH) SCTPASOC Measurements
UnitDescriptionEvent Name
peg countSCTP Association ActiveEstablishments - The number of
ACTVESTB
times that SCTP associationshave made a direct transition tothe ESTABLISHED state from
203E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
the COOKIEECHOED state(COOKIE-ECHOED -->ESTABLISHED). In this case theupper layer (i.e., the local M2PA)was the initiator of theassociation establishmentbetween the SCTP peers.
msecSCTP Association MaximumObserved Retransmission
ASMAXRTO
Timeout - The maximumobserved value of the SCTP statevariable Retransmission Timeout(RTO) in milliseconds (ms) forSCTP packets transmitted (butnot retransmitted) to the remotepeer endpoint’s destinationtransport address during themeasurement interval.
peg countSCTP Aborted Associations -The number of times that SCTP
ASOCABTD
associations have made a directtransition to the CLOSED statefrom any state using theprimitive “Abort” (AnyState--Abort--> CLOSED), conveyingan ungraceful termination of theassociation.
peg countSCTP Association Shutdowns- The number of times that SCTP
ASOCSHTD
associations have made a directtransition to the CLOSED statefrom either theSHUTDOWN-SENT state or theSHUTDOWN-ACK-SENT state,conveying graceful terminationof the association.
peg countSCTP Control Chunks Received- The number of SCTP control
CNTLCHKR
chunks received from the remotepeer (excluding duplicates).
peg countSCTP Control Chunks Sent -The number of SCTP control
CNTLCHKS
chunks sent to the remote peer(excluding retransmissions) afteran association has been formed.
204E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
CNTLCHKR register excludesinitial SCTP association set-upmessages (INIT andCOOKIE-ECHO).
peg countNumber of SCTP DATA chunksreceived from the remote SCTP
DATCHKRC
peer (excluding duplicates anddiscards).
peg countNumber of SCTP DATA chunkssent to the remote SCTP peer(excluding retransmissions).
DATCHKSN
peg countDuration the association was notin the Established state.
DURASNEST
peg countNumber of times the associationtransitioned out of theEstablished state.
ECASNEST
peg countSCTP Gap AcknowledgementsReceived - The number of Gap
GAPACKSR
Acknowledgement blocks inSelective Acknowledgement(SACK) control chunks receivedfrom the remote SCTP peer,indicating gaps in the peer’sreceived subsequences of DATAchunks as represented by theirTransport Sequence Numbers(TSNs) (The inclusion of thismeasurement is intended toallow network personnel toassess the message-deliveryperformance of the IPVHSLrelative to gap acknowledgmentlimits, if used as performancecriteria for link proving andin-service monitoring).
peg countSCTP Ordered Data ChunksReceived - The number of SCTP
ORDCHKRC
ordered data chunks receivedfrom the remote peer (excludingduplicates).
peg countSCTP Ordered Data ChunksSent - The number of SCTP
ORDCHKSN
ordered data chunks sent to the
205E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
remote peer (excludingretransmissions).
peg countSCTP Association PassiveEstablishments - The number of
PASVESTB
times that SCTP associationshave made a direct transition tothe ESTABLISHED state fromthe CLOSED state (CLOSED -->ESTABLISHED), indicating thatthe remote peers initiatedassociation establishment.
peg countSCTP Association PeerEndpoint Failures - The number
PEERFAIL
of peer endpoint failuredetection events for theassociation as triggered by thecrossing of threshold Assoc.Max. Retrans.
peg countSCTP AssociationRetransmitted Chunks - The
RTXCHNKS
number of SCTP data chunksretransmitted to the remoteSCTP peer. When T3-rtx expires,the DATA chunks that triggeredthe T3 timer will be re-sentaccording with theretransmissions rules. EveryDATA chunk that was includedin the SCTP packet that triggeredthe T3-rtx timer must be addedto the value of this counter.
octetsSCTP Packet Octets Received -The number of octets comprising
SCOCTRCV
valid SCTP packets receivedfrom the remote peer after anassociation has been formed.
octetsSCTP Packet Octets Sent - Thetotal number of octets
SCOCTSNT
comprising SCTP packetssubmitted to the IP layer fortransmittal to the remote peer fora specific association.
peg countSCTP Packets Received - Thetotal number of SCTP packets
SCPKTRCV
206E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
received from the remote peerthat had a valid checksum.Duplicates are included.
SCPKTRCV register excludes thepegging of SCTP Packetsreceived when no instance existson the card for any of the links,i.e., the association parameter"OPEN" has value "NO" for allthe links configured on the card.Also, excludes pegging of set upmessages (INIT andCOOKIE-ECHO) that are part ofassociation establishmentprocedure.
peg countSCTP Packets Sent - The totalnumber of SCTP packets sent to
SCPKTSNT
the remote peer, i.e., submittedby the local SCTP instance to theIP layer for transmission.Retransmissions are included.
SCPKTSNT register excludesinitial SCTP association set-upmessages (INIT-ACK andCOOKIE-ACK) and ABORTmessages. For M2PA associationINIT packet is never pegged.
statusIndication of Data Validity:STATUS
K indicates good dataI indicates incompleteintervalN indicates data not current
UI Reports
UI Example Output:
stdcfg2b 07-12-31 06:07:04 EST UNKNOWN 38.0.0-XX.XX.0 TYPE OF REPORT: DAILY MAINTENANCE MEASUREMENTS ON SCTPASOC REPORT PERIOD: LAST REPORT INTERVAL: 07-12-31 00:00:00 THRU 23:59:59
SCTPASOC-MTCD MEASUREMENTS: ASSOC: assoc1
These measurements are from 07-12-31, 00:00:00 through 23:59:59. ECASNEST = 0, DURASNEST = 0, DATCHKSN = 0, RTXCHNKS = 0, DATCHKRC = 0, SCPKTSNT = 20, SCPKTRCV = 20, SCOCTSNT = 0, SCOCTRCV = 0,
207E86977 Revision 1, July 2017
ReportsMeasurements
CNTLCHKS = 400, ORDCHKSN = 400, CNTLCHKR = 0, ORDCHKRC = 0, GAPACKSR = 0, ACTVESTB = 0, PASVESTB = 0, ASOCABTD = 0, ASOCSHTD = 0, PEERFAIL = 0, ASMAXRTO = 0
;
FTP Reports
Table 91: FTP MTCD/MTCDTH SCTPASOC Column Header
DescriptionFieldName
Associationname
ASSOC
FTP Example Output File Name:mtcd-sctpasoc_20071115_2400.csv
FTP Example Output File Format:
"CLLI","SWREL","RPTDATE","RPTIME","TZ","RPTTYPE","RPTPD","IVALDATE","IVALSTART","IVALEND","NUMENTIDS"<cr><lf>"ipmeas","UNKNOWN ??.?.?-58.21.0","2007-08-18","00:00:18","****","DAILY MAINTENANCE MEASUREMENTS ON SCTPASOC","LAST","2007-08-17","00:00:00","24:00:00",3<cr><lf>"STATUS","ASSOC","ECASNEST","DURASNEST","DATCHKSN","RTXCHNKS","DATCHKRC","SCPKTSNT","SCPKTRCV","SCOCTSNT","SCOCTRCV","CNTLCHKS","ORDCHKSN","CNTLCHKR","ORDCHKRC","GAPACKSR","ACTVESTB","PASVESTB","ASOCABTD","ASOCSHTD","PEERFAIL","ASMAXRTO"<cr><lf>
"K","A1101",0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0<cr><lf>"K","A1102",0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0<cr><lf>"K","A1103",0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0<cr><lf>
Assuming each data line will be:
4 char status + 18 char association + 20*(6 char data) + 2 = 144 chars
For a report of 1000 associations, typical file size is:
Table 92: Typical File Size: mtcd-sctpasoc.csv
File Size=Report dataReportheader
Systemheader
144445 bytes=144000+195+250
SCTPCARD MTCD Report
Command Examples
• UI:rept-meas:type=mtcd:enttype=sctpcard:loc=1201
208E86977 Revision 1, July 2017
ReportsMeasurements
• FTP:rept-ftp-meas:type=mtcd:enttype=sctpcard
Measurement Events
Table 93: Daily Maintenance (MTCD) and Day-to-Hour Maintenance (MTCDTH) SCTPCARD Measurementslists the SCTPCARD events and their descriptions.
Table 93: Daily Maintenance (MTCD) and Day-to-Hour Maintenance (MTCDTH) SCTPCARDMeasurements
UnitDescriptionEvent Name
peg countSCTP Association ActiveEstablishments - The number of
ACTVESTB
times that SCTP associationshave made a direct transition tothe ESTABLISHED state fromthe COOKIEECHOED state(COOKIE-ECHOED -->ESTABLISHED). In this case theupper layer (i.e., the local M2PA)was the initiator of theassociation establishmentbetween the SCTP peers.
peg countSCTP Aborted Associations -The number of times that SCTP
ASOCABTD
associations have made a directtransition to the CLOSED statefrom any state using theprimitive “Abort” (AnyState--Abort--> CLOSED), conveyingan ungraceful termination of theassociation.
peg countSCTP Association Shutdowns- The number of times that SCTP
ASOCSHTD
associations have made a directtransition to the CLOSED statefrom either theSHUTDOWN-SENT state or theSHUTDOWN-ACK-SENT state,conveying graceful terminationof the association.
peg countSCTP Control Chunks Received- The number of SCTP control
CNTLCHKR
chunks received from the remotepeer (excluding duplicates).
peg countSCTP Control Chunks Sent -The number of SCTP control
CNTLCHKS
209E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
chunks sent to the remote peer(excluding retransmissions),including chunks for which anassociation has not yet beenformed.
peg countNumber of SCTP DATA chunksreceived from the remote SCTP
DATCHKRC
peer (excluding duplicates anddiscards).
peg countNumber of SCTP DATA chunkssent to the remote SCTP peer(excluding retransmissions).
DATCHKSN
peg countSCTP Ordered Data ChunksReceived - The number of SCTP
ORDCHKRC
ordered data chunks receivedfrom the remote peer (excludingduplicates).
peg countSCTP Ordered Data ChunksSent - The number of SCTP
ORDCHKSN
ordered data chunks sent to theremote peer (excludingretransmissions).
peg countSCTP Association PassiveEstablishments - The number of
PASVESTB
times that SCTP associationshave made a direct transition tothe ESTABLISHED state fromthe CLOSED state (CLOSED -->ESTABLISHED), indicating thatthe remote peers initiatedassociation establishment.
peg countSCTP AssociationRetransmitted Chunks - The
RTXCHNKS
number of SCTP data chunksretransmitted to the remoteSCTP peer. When T3-rtx expires,the DATA chunks that triggeredthe T3 timer will be re-sentaccording with theretransmissions rules. EveryDATA chunk that was includedin the SCTP packet that triggeredthe T3-rtx timer must be addedto the value of this counter.
210E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
octetsSCTP Packet Octets Received -The number of octets comprising
SCOCTRCV
valid SCTP packets receivedfrom the remote peer, includingpackets for which an associationhas not yet been formed.
octetsSCTP Packet Octets Sent - Thetotal number of octets
SCOCTSNT
comprising SCTP packetssubmitted to the IP layer fortransmittal to the remote peer,including packets for which anassociation has not been formed.
peg countSCTP Packets Received - Thetotal number of SCTP packets
SCPKTRCV
received from the remote peerthat had a valid checksum.Duplicates are included.
SCPKTRCV register excludes thepegging of SCTP Packetsreceived when no instance existson the card for any of theassociations, i.e., the associationparameter "OPEN" has value"NO" for all the associationsconfigured on the card. Also,excludes pegging of set upmessages (INIT andCOOKIE-ECHO) that are part ofassociation establishmentprocedure.
peg countSCTP Packets Received WithChecksum Error - The number
SCPKTRER
of SCTP packets received fromremote peers with an invalidchecksum
peg countSCTP Packets Sent - The totalnumber of SCTP packets sent to
SCPKTSNT
the remote peer, i.e., submittedby the local SCTP instance to theIP layer for transmission.Retransmissions are included.
SCPKTSNT register excludesinitial SCTP association set-upmessages (INIT-ACK and
211E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
COOKIE-ACK). For M2PAassociation INIT packet is neverpegged.
statusIndication of Data Validity:STATUS
K indicates good dataI indicates incompleteintervalN indicates data not current
peg countUnassociated (Out-of-the-Blue)SCTP Packets - The number of
UNASCTPK
“out-of-the-blue” SCTP packetsreceived by the host, i.e., SCTPpackets correctly formed withthe correct checksum value, butfor which the receiver (localSCTP) was not able to identifythe association to which thepacket belongs.
UNASCTPK register includesthe pegging of SCTP Packetsreceived when no instance existson the card for any of theassociations, i.e., the associationparameter "OPEN" has value"NO" for all the associationsconfigured on the card (SeeSCPKTRCV register).
UI Reports
UI Example Output:
stdcfg2b 07-12-31 EST UNKNOWN 38.0.0-XX.XX.0 TYPE OF REPORT: DAILY MAINTENANCE MEASUREMENTS ON SCTPCARD REPORT PERIOD: LAST REPORT INTERVAL: 07-12-31 00:00:00 THRU 23:59:59
SCTPCARD-MTCD MEASUREMENTS: LOC: 1201
These measurements are from 07-12-31, 00:00:00 through 23:59:59. DATCHKSN = 0, RTXCHNKS = 0, DATCHKRC = 0, SCPKTSNT = 20, SCPKTRCV = 20, SCPKTRER = 0, UNASCTPK = 0, SCOCTSNT = 0, SCOCTRCV = 0, CNTLCHKS = 400, ORDCHKSN = 400, CNTLCHKR = 0, ORDCHKRC = 0, ACTVESTB = 0, PASVESTB = 0, ASOCABTD = 0, ASOCSHTD = 0
;
212E86977 Revision 1, July 2017
ReportsMeasurements
FTP Reports
FTP Example Output File Name: mtcd-sctpcard_20071115_2400.csv
FTP Example Output File Format:
"CLLI","SWREL","RPTDATE","RPTIME","TZ","RPTTYPE","RPTPD","IVALDATE","IVALSTART","IVALEND","NUMENTIDS"<cr><lf>"tekelecstp",”38.0.0-XX.XX.0”,”2007-12-31”,"12:12:10","EST","DAILY MAINTENANCE MEASUREMENTS ON SCTPCARD","LAST",”2007-12-30”,"00:00:00","24:00:00",3<cr><lf><cr><lf>"STATUS","LOC","DATCHKSN","RTXCHNKS","DATCHKRC","SCPKTSNT","SCPKTRCV","SCPKTRER","UNASCTPK","SCOCTSNT","SCOCTRCV","CNTLCHKS","ORDCHKSN","CNTLCHKR","ORDCHKRC","ACTVESTB","PASVESTB","ASOCABTD","ASOCSHTD"<cr><lf>"K","1101",0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0<cr><lf>"K","1102",0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0<cr><lf>"K","1103",0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0<cr><lf>
Assuming each data line will be:
4 char status + 7 char location + 17*(6 char data) + 2 = 115 chars
For a report of 80 cards, typical file size is:
Table 94: Typical File Size: mtcd-sctpcard.csv
File Size=Report dataReportheader
Systemheader
9635 bytes=9200+185+250
UA MTCD Report
Command Examples
• UI:rept-meas:type=mtcd:enttype=ua:aname=assoc1:asname=appsrvr1
• FTP:rept-ftp-meas:type=mtcd:enttype=ua
Measurement Events
Table 95: Daily Maintenance (MTCD) and Day-to-Hour Maintenance (MTCDTH) UA Measurements liststhe UA events and their descriptions.
Table 95: Daily Maintenance (MTCD) and Day-to-Hour Maintenance (MTCDTH) UA Measurements
UnitDescriptionEvent Name
peg countFor M3UA, this registerrepresents the number of DATA
RXDATAMS
messages received from theASP.
213E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
For SUA, this register representsthe total of CLDT and CLDRmessages received from theASP.
octetsFor M3UA, this registerrepresents the number of DATAoctets received from the ASP.
RXDATAOC
For SUA, this register representsthe total of CLDT and CLDRoctets received from the ASP.
peg countNumber of messages receivedwith multiple routing contexts
RXMLRCMS
(always pegged against thedefault AS).
statusIndication of Data Validity:STATUS
K indicates good dataI indicates incompleteintervalN indicates data not current
peg countFor M3UA, this registerrepresents the number of DATAmessages sent to the ASP.
TXDATAMS
For SUA, this register representsthe total of CLDT and CLDRmessages sent to the ASP.
octetsFor M3UA, this registerrepresents the number of DATAoctets sent to the ASP.
TXDATAOC
For SUA, this register representsthe total of CLDT and CLDRoctets sent to the ASP.
peg countTotal ASPM messages receivedfrom the ASP (including ASPSMand ASPTM messages).
UAASPMRX
peg countTotal ASPM messages sent tothe ASP (including ASPSM andASPTM messages).
UAASPMTX
peg countThe number of times the ASPtransitioned out of theASP-Active state.
UAASPNAC
214E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
secondsThe duration that the ASP wasnot in the ASP-Active state.
UAASPNAT
peg countThe number of times anAS-ASSOC experienced
UACNGCNT
congestion (this may include theAS entering congestion as aresult of the ASSOC enteringcongestion).
secondsThe duration that an AS-ASSOCexperienced congestion (this
UACNGTIM
may include the AS enteringcongestion as a result of theASSOC entering congestion).
peg countTotal MGMT messages receivedfrom the ASP.
UAMGMTRX
peg countTotal MGMT messages sent tothe ASP.
UAMGMTTX
peg countTotal Network Managementoctets received from the ASP -
UANMOCTR
The total number of non-DATAUA octets received from the ASP(i.e., sum of the ASPM, ASPTM,SSNM, MGMT, and RKM).
peg countTotal Network Managementoctets sent to the ASP - The total
UANMOCTT
number of non-DATA UA octetssent to the ASP (i.e., sum of theASPM, ASPTM, SSNM, MGMT,and RKM).
peg countTotal Network Managementmessages received from the
UANMMSGR
ASP - The total number ofnon-DATA UA messagesreceived from the ASP (i.e., sumof the ASPM, ASPTM, SSNM,MGMT, and RKM).
peg countTotal Network Managementmessages sent to the ASP - The
UANMMSGT
total number of non-DATA UAmessages sent to the ASP (i.e.,sum of the ASPM, ASPTM,SSNM, MGMT, and RKM).
215E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
peg countTotal SSNM messages receivedfrom the ASP.
UASSNMRX
peg countTotal SSNM messages sent to theASP.
UASSNMTX
UI Reports
stdcfg2b 07-12-31 06:07:04 EST UNKNOWN 38.0.0-XX.XX.0 UA-MTCD MEASUREMENTS: AS: appsrvr1 ASSOC: assoc1
These measurements are from 07-12-31, 00:00:00 through 23:59:59. RXDATAMS = 100, RXDATAOC = 4000, TXDATAMS = 200, TXDATAOC = 8000, UANMMSGT = 0, UANMOCTT = 0, UANMMSGR = 0, UANMOCTR = 0, UAASPMTX = 0, UAASPMRX = 0, UASSNMTX = 0, UASSNMRX = 0, UAMGMTTX = 0, UAMGMTRX = 0, UACNGCNT = 0, UACNGTIM = 0, UAASPNAC = 0, UAASPNAT = 0, RXMLRCMS = 0
;
FTP Reports
FTP Example Output File Name: mtcd-ua_20071114_2400.csv
FTP Example Output File Format:
"CLLI","SWREL","RPTDATE","RPTIME","TZ","RPTTYPE","RPTPD","IVALDATE","IVALSTART","IVALEND","NUMENTIDS"<cr><lf>"tekelecstp","37.5.0-58.25.0","2007-11-15","02:01:10","EST","DAILY MAINTENANCE MEASUREMENTS ON UA","LAST","2007-11-14","00:00:00","24:00:00",3<cr><lf><cr><lf>"STATUS","AS","ASSOC","RXDATAMS","TXDATAMS","RXDATAOC","TXDATAOC","RXMLRCMS","UAASPMRX","UAASPNAC","UAASPNAT","UACNGCNT","UACNGTIM","UAMGMTRX","UAMGMTTX","UANMOCTR","UANMOCTT","UANMMSGR","UANMMSGT","UASSNMRX","UASSNMTX","RXMLRCMS"<cr><lf>"K","as1101","a1101",0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0<cr><lf>"K","as1102","a1102",0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0<cr><lf>"K","as1103","a1103",0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0<cr><lf>
Assuming each data line will be:
4 char status + 15 char AS + 15 char ASSOC + 19*(6 char data) + 2 = 150 chars
For a report of 1000 Application Servers, typical file size is:
Table 96: Typical File Size: mtcd-ua.csv
File Size=Report dataReportheader
Systemheader
150000 bytes=150000+280+250
216E86977 Revision 1, July 2017
ReportsMeasurements
VFLEX MTCD Report
The enttype=vflex entity generates two separate reports per period. These reports are generated asCSV files and FTP'd to the customer FTP server. The command example will generate the followingdaily reports:
• Daily V-Flex System Wide Measurements
• Daily V-Flex Measurements Per SSP
Example Commands:
FTP: rept-ftp-meas:type=mtcd:enttype=vflex[:period=specific:day=xxx]
Table 97: Daily Maintenance V-Flex System Wide Measurements
UnitDescriptionEvent Name
statusIndication of Data Validity:STATUS
K indicates good dataI indicates incompleteintervalN indicates data not current
peg countTotal number of IDP Connectresponses sent by VFLEX service.
VFCNCTRSP
peg countTotal number of IDP queriesreceived with errors (those
VFERRRSP
resulted in TCAP Error responsefrom VFLEX).
peg countTotal number of IDP queriesreceived for VFLEX service.
VFIDPQRCV
Table 98: Daily Maintenance V-Flex Per SSP Measurements
UnitDescriptionEvent Name
statusIndication of Data Validity:STATUS
K indicates good dataI indicates incompleteintervalN indicates data not current
peg countTotal number of IDP queriesreceived for VFLEX service withinvalid MSISDN.
VFIMSISDN
217E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
peg countTotal number of IDP queriesreceived for VFLEX service withvalid MSISDN.
VFVMSISDN
FTP Reports
Daily V-Flex System Wide Measurements
FTP Example Output File Name: mtcd-vflex_20070816_2400.csv
FTP Example Output File Format:
"CLLI","SWREL","RPTDATE","RPTIME","TZ","RPTTYPE","RPTPD","IVALDATE","IVALSTART","IVALEND","NUMENTIDS"<cr><lf>"tekelecstp","37.6.0-58.20.0","2007-08-17","11:32:53","EST","DAILY MAINTENANCE MEASUREMENTS ON VFLEX SYSTEM","LAST","2007-08-16","00:00:00","24:00:00",1<cr><lf><cr><lf>"STATUS","VFIDPQRCV","VFCNCTRSP","VFERRRSP"<cr><lf>"K", 20,10,10<cr><lf>
Assuming each data line will be: 4 char status + 3*(6 char data) + 2 = 24 chars, the typical file size is:
Table 99: Typical File Size: mtcd-vflex.csv
File Size=Report data+Reportheader+System
header
347=24+45+260
Daily V-Flex Measurements Per SSPFTP Example Output File Name: mtcd-vflexssp_20070816_2400.csv
FTP Example Output File Format:
"CLLI","SWREL","RPTDATE","RPTIME","TZ","RPTTYPE","RPTPD","IVALDATE","IVALSTART","IVALEND","NUMENTIDS""<cr><lf>"tekelecstp","37.6.0-58.20.0","2007-08-17","11:32:58","EST","DAILY MAINTENANCE MEASUREMENTS ON VFLEX SSP","LAST","2007-08-16","00:00:00","24:00:00",1<cr><lf><cr><lf>"STATUS",“SSP”,“VFVMSISDN”,“VFIMSISDN”<cr><lf>“K”, “001-101-002”,10,10<cr><lf>
Note: The field identifier SSP designates the Service Switching Point.
Assuming each data line will be: 4 char status + 14 char SSP + 2*(6 char data) + 2 = 32 chars, the typicalfile size is:
218E86977 Revision 1, July 2017
ReportsMeasurements
Table 100: Typical File Size: mtcd-vflex-ssp.csv
File Size=Report data+Reportheader+System
header
297 + (32 *#PointCodes) bytes
=32 * #PointCodes
+40+257
For a report of 200 SSPs, typical file size is:
Table 101: Typical File Size: mtcd-vflexssp.csv
File Size=Report data+Reportheader+System
header
6697 bytes=32 * 200+40+257
ATINPQ MTCD Report
The enttype=atinpq entity generates two separate reports per period. These reports are generated asCSV files and FTP'd to the customer FTP server. The command example will generate the followingdaily reports:
• Daily ATINPQ System Wide Measurements
• Daily ATINPQ Per SSP Measurements
Example Commands:
• FTP
rept-ftp-meas:type=mtcd:enttype=atinpq[:period=specific:day=xxx]
Measurement Events
Table 102: Daily Maintenance (MTCD) and Hourly Maintenance (MTCH) ATINPQ Registers
UnitDescriptionEvent Name
peg countTotal number of ATINP queriesreceived for ATINPQ service.
ATINPQRCV
This peg is incremented only ifATINP feature is enabled andthe incoming message opcode isATI.
peg countTotal number of ATI ACKmessages sent by the ATINPQ
ATINPQACK
service. This peg is incremented
219E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
only if the ATINP feature isenabled.
peg countTotal number of incoming ATImessages that did not result in
ATINPQERR
either ATI ACK or ATI NACKwith error code of eitherUnknown Subscriber or ATI NotAllowed. This peg isincremented only if the ATINPfeature is enabled.
statusIndication of Data Validity:STATUS
K indicates good dataI indicates incompleteintervalN indicates data not current
textThe TYPE of the point code.Valid values are ANSI, ITUI,ITUN, and ITUN24.
PC TYPE
Daily ATINPQ Reports
System Wide Report
• Example Output File Name:
mtcd-atinpq_20080616_2400.csv
• Example Output File Format:
"CLLI","SWREL","RPTDATE","RPTIME","TZ","RPTTYPE","RPTPD","IVALDATE","IVALSTART","IVALEND","NUMENTIDS"<cr><lf>"tekelecstp","39.0.0-61.5.0","2008-06-17","11:32:53","EST","DAILY MAINTENANCE MEASUREMENTS ON ATINPQ SYSTEM","LAST","2008-06-17","00:00:00","24:00:00",1<cr><lf><cr><lf>"STATUS","ATINPQRCV","ATINPQACK","ATINPQERR"<cr><lf>"K", 20,10,10<cr><lf>
Assuming each data line will be: 4 char status + 3*(6 char data) + 2 = 24 chars, the typical file sizeis:
Table 103: Typical File Size: mtcd-atinpq.csv
File Size=Report data+Reportheader+System
header
347=24+45+260
220E86977 Revision 1, July 2017
ReportsMeasurements
Per SSP Report
• Example Output File Name:
mtcd-atinpqssp_20080616_2400.csv
• Example Output File Format:
"CLLI","SWREL","RPTDATE","RPTIME","TZ","RPTTYPE","RPTPD","IVALDATE","IVALSTART","IVALEND","NUMENTIDS""<cr><lf>"tekelecstp","39.0.0-61.5.0","2008-06-17","11:32:58","EST","DAILY MAINTENANCE MEASUREMENTS ON ATINPQ SSP","LAST","2008-06-16","00:00:00","24:00:00",1<cr><lf><cr><lf>"STATUS",“SSP”,“ATINPQRCV”,“ATINPQACK”,“ATINPQERR”<cr><lf>“K”, “001-101-002”,10,10,10<cr><lf>
Assuming each data line will be: 4 char status + 14 char SSP + 3*(6 char data) + 2 = 38 chars, thetypical file size is:
Table 104: Typical File Size: mtcd-atinpq.csv
File Size=Report data+Reportheader+System
header
297 + (38 *#Point
Codes) bytes
=(38 * #PointCodes)
+40+257
For a report of 200 SSPs, typical file size is:
Table 105: Typical File Size: atinpq 200 SSPs
File Size=Report data+Reportheader+System
header
7897 bytes=(38 * 200)+40+257
AIQ MTCD Report
The entity type for ANSI41 AIQ measurements is “AIQ”, which generates two reports per period. Thecommands to generate the daily on-demand measurement report can be specified with an optionalday parameter, xxx, providing a three-letter abbreviation for a day of the week (MON, TUE, WED,THU, FRI, SAT, or SUN). The specific period, period=specific, parameter is required when the optionalday parameter is used.
The measurements reports supported are:
• Per System Totals
• Per SSP Totals
The measurement report types supported are:
• Daily measurement report type "mtcd"
221E86977 Revision 1, July 2017
ReportsMeasurements
• Hourly measurement report type "mtch"
The on demand reports and scheduled reports are rejected until the AIQ feature is enabled. Thecommand chg-mtc-measopts:mtchaiq=on:mtcdaiq=on starts scheduled reports generation.Both on-demand and scheduled reports at hourly and daily boundary (MTCH and MTCD) generatetwo reports, namely Per System totals and Per SSP totals.
Example Commands:
• FTP: rept-ftp-meas:type=mtcd:enttype=aiq[:period=specific:day=xxx]
This command creates both the Per System and Per SSP Totals daily reports.
Measurement Events
Table 106: Daily Maintenance (MTCD) and Hourly Maintenance (MTCH) AIQ Registers
UnitDescriptionEvent Name
peg countTotal number ofAnalyzedInformation messages
AIQRCV
received for AIQ service. Thispeg is incremented only ifANSI41 AIQ feature is enabled.
peg countTotal number of Return Resultsent by the AIQ service. This peg
AIQSUCC
is incremented only if theANSI41 AIQ feature is enabled.
peg countTotal number of ANSI41 AIQqueries resulting in a negative
AIQERR
response (Return Error or Reject)generation by AIQ service. Thispeg is incremented only if theANSI41 AIQ feature is enabled.
textThe TYPE of the point code.Valid values are ANSI, ITUI,ITUN, and ITUN24.
PC TYPE
Daily AIQ Reports
System Wide Report
• Example Output File Name:
mtcd-aiq_20090820_2400.csv
222E86977 Revision 1, July 2017
ReportsMeasurements
• Example Output File Format:
"CLLI","SWREL","RPTDATE","RPTIME","TZ","RPTTYPE","RPTPD","IVALDATE","IVALSTART","IVALEND","NUMENTIDS"<cr><lf>"tekelecstp","41.0.0-62.34.51","2009-08-20","11:32:53","EST","DAILY MAINTENANCE MEASUREMENTS ON AIQ SYSTEM","LAST","2009-08-20","00:00:00","24:00:00",1<cr><lf><cr><lf>"STATUS","AIQRCV","AIQSUCC","AIQERR"<cr><lf>"K",20,10,10<cr><lf>
Assuming each data line will be: 4 char status + 3*(6 char data) + 2 = 24 chars, the typical file sizeis:
Table 107: Typical File Size: mtcd-atinpq.csv
File Size=Report data+Reportheader+System
header
322=24+38+260
Per SSP Report
• Example Output File Name:
mtcd-aiqssp_20090820_2400.csv
• Example Output File Format:
"CLLI","SWREL","RPTDATE","RPTIME","TZ","RPTTYPE","RPTPD","IVALDATE","IVALSTART","IVALEND","NUMENTIDS""<cr><lf>"tekelecstp","41.0.0-62.34.51","2009-08-20","11:32:58","EST","DAILY MAINTENANCE MEASUREMENTS ON AIQ SSP","LAST","2009-08-19","00:00:00","24:00:00",1<cr><lf><cr><lf>"STATUS",“SSP”,“AIQRCV”,“AIQSUCC”,“AIQERR”<cr><lf>“K”, “001-101-002”,20,10,10<cr><lf>
Assuming each data line will be: 4 char status + 14 char SSP + 3*(6 char data) + 2 = 38 chars, thetypical file size is:
Table 108: Typical File Size: mtcd-aiq.csv
File Size=Report data+Reportheader+System
header
301 + ( 38 *#Point
=( 38 * #Pointcodes )
+44+257
Codes )bytes
For a report of 200 SSPs, typical file size is:
223E86977 Revision 1, July 2017
ReportsMeasurements
Table 109: Typical File Size: aiq 200 SSPs
File Size=Report data+Reportheader+System
header
7901 bytes=( 38 * 200 )+44+257
GTTAPATH MTCD Report
The entity type for GTT Actions Per-Path measurements is “gttapath”, which generates two reportsper period. The commands to generate the daily on-demand measurement report can be specifiedwith an optional day parameter, xxx, providing a three-letter abbreviation for a day of the week (MON,TUE, WED, THU, FRI, SAT, or SUN). The specific period, period=specific, parameter is required whenthe optional day parameter is used.
The measurement report supported are:
• Per System Totals
• Per Path Totals
The measurement report types supported are:
• Daily measurement report type “mtcd”
• Hourly measurement report type “mtch”
The on-demand reports and scheduled reports are rejected until the GTT Duplicate and/or Discardand/or Forward Action feature is enabled. Turning ON the feature is not required, because one of theregister “GTTACTNA” might get pegged in case GTT action fails because of the feature not being inthe ON state.
The command chg-mtc-measopts:mtchgttapath=on:mtcdgttapath=on starts scheduledreports generation. Both on-demand and scheduled reports at hourly and daily boundary (MTCHand MTCD) generate two reports: Per System Totals and Per-Path.
Example Commands:
FTP : rept-ftp-meas:type=mtcd:enttype=gttapath[:period=specific:day=xxx]where [:period=specific:day=xxx] is optional.
This example command creates both the Per-Path System Totals and the Per-Path Totals daily reports(the report date corresponds to the day entered in the command).
Table 110: MTCD/MTCH GTT Actions System-Wide Measurements
UnitDescriptionEvent Name
peg countGTT Actions – MSUs Discarded- The total number of messages
GTTADISC0
discarded by the DISCARD GTTAction.
224E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
peg countGTT Actions – MSUs Discarded- The total number of messages
GTTADISC1
discarded by the UDTS GTTAction.
peg countGTT Actions – MSUs Discarded- The total number of messages
GTTADISC2
discarded by the TCAP ErrorGTT Action
peg countGTT Actions – MSUsDuplicated - The total number
GTTADUP
of messages for which DuplicateMSU was sent. Multipleduplicate actions in an action setshall also increment this registeronly once.
peg countGTT Actions – MSUsForwarded - The total number
GTTAFWD
of messages forwarded byForward GTT Action.
peg countGTT Actions - The total numberof messages receiving any GTTaction.
GTTASET
peg countThe total number of messagesserviced by GFLEX GTT Action.
GTTASRVGFLX
peg countThe total number of messagesserviced by GPORT GTT Action.
GTTASRVGPRT
peg countThe total number of messagesserviced by SMSMR GTT Action.
GTTASRVSMSR
peg countThe total number of messagesserviced by SFLOG GTT Action.
GTTASFLOG
peg countThe total number of messagesthat successfully pass SCPVALGTT Action.
GTTAMSVTO
peg countThe total number of messagesdiscarded by SCPVAL GTTAction.
GTTAMSVDI
peg countThe total number of messageswhere validation was notapplied by SCPVAL GTT Action.
GTTAMSVNA
225E86977 Revision 1, July 2017
ReportsMeasurements
Table 111: MTCD/MTCH GTT Actions Per-Path Measurements
UnitDescriptionEvent Name
pegcount
GTT Actions - The total number of messages for which no GTT action wassuccessfully performed.
GTTACTNA
This register shall be pegged for a message if either of these occurs:
• No GTT Action set was associated with the final GTT translation
• No GTT Action in the associated GTT Action set could be executedsuccessfully (for any reason).
pegcount
GTT Actions – MSUs Discarded - The total number of messages discarded bythe DISCARD GTT Action.
GTTADISC0
pegcount
GTT Actions – MSUs Discarded - The total number of messages discarded bythe UDTS GTT Action.
GTTADISC1
pegcount
GTT Actions – MSUs Discarded - The total number of messages discarded bythe TCAP Error GTT Action
GTTADISC2
pegcount
GTT Actions – MSUs Duplicated - The total number of messages for whichDuplicate MSU was sent.
GTTADUP
This register shall be pegged for a message only once for which either a singleor multiple duplicate GTT Actions were performed.
pegcount
GTT Actions – MSUs Forwarded - The total number of messages forwardedby Forward GTT Action.
GTTAFWD
pegcount
The total number of messages serviced by GFLEX GTT Action.GTTASRVGFLX
pegcount
The total number of messages serviced by GPORT GTT Action.GTTASRVGPRT
pegcount
The total number of messages serviced by SMSMR GTT Action.GTTASRVSMSR
pegcount
The total number of messages serviced by SFLOG GTT Action.GTTASFLOG
pegcount
The total number of messages that successfully pass SCPVAL GTT Action.GTTAMSVTO
pegcount
The total number of messages discarded by SCPVAL GTT Action.GTTAMSVDI
pegcount
The total number of messages where validation was not applied by SCPVALGTT Action.
GTTAMSVNA
226E86977 Revision 1, July 2017
ReportsMeasurements
Daily GTTAPATH ReportsThe command rept-ftp-meas:type=mtcd:enttype=gttapath produces the system-wide reportand the per-path report shown here.
System Wide Report
• Example Output File Name: mtcd-gttasys_20140228_2400.csv• Example Output File Format:
"CLLI","SWREL","RPTDATE","RPTIME","TZ","RPTTYPE","RPTPD","IVALDATE","IVALSTART","IVALEND","NUMENTIDS""tekelecstp","EAGLE5 46.3.0.0.0-66.11.0","2015-10-06","00:10:33","EST ","DAILY MAINTENANCE MEASUREMENTS ON GTTACTION SYSTEM","LAST","2015-10-06","00:00:00","24:00:00",1
"STATUS","GTTADISC0","GTTADISC1","GTTADISC2","GTTADUP","GTTAFWD","GTTASET","GTTASRVGFLX","GTTASRVGPRT","GTTASRVSMSR","GTTASFLOG","GTTAMSVTO","GTTAMSVDI","GTTAMSVNA""K",0,0,0,0,0,0,0,0,0,0,0,0,0
Assuming each data line will be: 4 char status + 13 * (6 char data) + 2 = 84 chars, the typical file sizeis:
Table 112: Typical File Size: mtcd-gttasys.csv
File Size=Report data+Reportheader+System
header
501 bytes=84+167+250
Per Path Report
• Example Output File Name: mtcd-gttapath_20140124_2200.csv
Table 113: Entity Identification(PATH-CDSN-SCDGTA-CGSN-SCGGTA-OPSN-PKG-OPCODE-<A>/F)
DefinitionString Format
The GTT path name assigned when GTTACTpath was entered.
PATH
The called party global title translations set nameassigned when GTTACT path was entered.
CDSN
The called party start global title address(SCDGTA) assigned when GTTACT pathentered for a non-ranged entry
SCDGTA
or
The ranged called party start global title address(SCDGTA) and End global title address
SCDGTA->ECDGTA
227E86977 Revision 1, July 2017
ReportsMeasurements
DefinitionString Format(ECDGTA) assigned when the GTTACT pathwas entered.
The calling party global title translations setname assigned when GTTACT path was entered.
CGSN
The calling party start global title addressassigned when GTTACT path entered for anon-ranged entry
SCGGTA
or
The ranged calling party start global title address(SCGGTA) and End global title address
SCDGTA->ECDGTA
(ECGGTA) assigned when the GTTACT pathwas entered.
The global title translations set name of TCAPoperation code assigned when GTTACT pathwas entered
OPSN
The ANSI/ITU TCAP package type assignedwhen GTTACT Path was entered.
PKG
TCAP operation code assigned when GTTACTpath was entered.
OPCODE
‘<A>’ stands for Application Context Name(ACN) assigned when GTTACT path entered if
<A>/F
package type is ITU TCAP. It is preceded by a“less than” sign(<) and followed by a “greaterthan” sign (>).
‘F’ stands for ANSI TCAP family field assignedif package type is ANSI TCAP when GTTACTPath was entered.
Backslash ‘/’ will not be displayed in the reportdata. Its only signifies that either <A> or F willbe displayed at a time based on the package typedisplayed in the PKG entry.
Note:
• If any entry has no value assigned then default value “#” will be displayed for it.
• These string formats allow efficient automated post processing of measurements reports; theyare not designed to be easily readable. A brief note explaining the format is included in thereport.
228E86977 Revision 1, July 2017
ReportsMeasurements
• Example Output File Format:
"CLLI","SWREL","RPTDATE","RPTIME","TZ","RPTTYPE","RPTPD","IVALDATE","IVALSTART","IVALEND","NUMENTIDS""tekelecstp","EAGLE5 46.3.0.0.0-66.11.0","2015-09-06","00:10:35","EST ","DAILY MAINTENANCE MEASUREMENTS ON GTTACTION PER-PATH","LAST","2015-09-06","00:00:00","24:00:00",6
For a path containing GTA ranges, PATH-CDSN-SCDGTA-CGSN-CGGTA-OPSN-PKG-OPCODE-<A>/F = PATH-CDSN-SCDGTA->ECDGTA-CGSN-SCGGTA->ECGTA-OPSN-PKG-OPCODE-<A>/F"STATUS","PATH-CDSN-SCDGTA-CGSN-CGGTA-OPSN-PKG-OPCODE-<A>/F","GTTACTNA","GTTADISC0","GTTADISC1","GTTADISC2",""GTTADUP","GTTAFWD","GTTASRVGFLX","GTTASRVGPRT","GTTASRVSMSR","GTTASFLOG","GTTAMSVTO","GTTAMSVDI","GTTAMSVNA""K","path1-cdlim1-12345-cglim2-123-oplim3-ituuni-<1-1-1-1-1-1-1>",0,0,0,0,0,0,0,0,0,0,0,0,0"K","gttp5-#-#-cglim2-126-opname3-bgn-10",0,0,0,0,0,0,0,0,0,0,0,0,0"K","p6-#-#-cglim6-1234-#-#-#",0,0,0,0,0,0,0,0,0,0,0,0,0
Assuming each data line will be: 4 char status + 169 char(PATH-CDSN-SCDGTA-CGSN-CGGTA-OPSN-PKG-OPCODE-<A>/F) + 13 * (6 char data) + 2 =253 chars, the typical file size is:
Table 114: Typical File Size: mtcd-gttapath.csv
File Size=Report data(1000 paths)+Report
header+Systemheader
253,487bytes
=253,000+237+250
SIP MTCD Report
Example Commands:
UI: rept-meas:type=mtcd:enttype=sip
FTP:rept-ftp-meas:type=mtcd:enttype=sip
Table 115: Daily Maintenance (MTCD) and Day-To-Hour Maintenance (MTCDTH) Measurements
UnitDescriptionEvent Name
peg countThe total number of SIP invitereceived (Including re-transmits)
INVITERCVD
peg countNumber of cancel receivedCANCRCVD
peg countNumber of 1xx responses sentPROVRSPSENT
peg countNumber of 2xx responses sentOKRSPSENT
peg countNumber of 302 responses sentRDRCTSENT
peg countNumber of 4xx responses sentCLNFAILSENT
peg countNumber of 5xx responses sentSRVERRSENT
229E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
peg countNumber of SIP invite messagesfor which rxdb lookup was
NPSUCC
successfully performed andRN/ASD was found
peg countNumber of SIP invite messagesfor which rxdb lookup was notperformed
NPBYPASSSUC
peg countNumber of SIP invite messagesfor which rxdb lookup returnedRN not found
INVALIDDN
peg countNumber of SIP invite messagesfor which rxdb lookup returnedRN not found
NPRNNF
UI Example Output:
tekelecstp 13-01-11 00:07:56 EST EAGLE5 45.0.0-64.49.0 TYPE OF REPORT: DAILY MAINTENANCE MEASUREMENTS ON SIP REPORT PERIOD: LAST REPORT INTERVAL: 03-01-10, 00:00:00 through 23:59:59
SIP-MTCD MEASUREMENTS
INVITERCVD = 0, CANCRCVD = 0, PROVRSPSENT= 0, OKRSPSENT = 0, RDRCTSENT = 0, CLNFAILSENT= 0, SRVERRSENT = 0, NPSUCC = 0, NPBYPASSSUC= 0, INVALIDDN = 0, NPRNNF = 0
FTP Example Output File Name:mtcd-sip_20131004_2400.csv
FTP Example Output File Format:
"CLLI","SWREL","RPTDATE","RPTIME","TZ","RPTTYPE","RPTPD","IVALDATE","IVALSTART","IVALEND","NUMENTIDS"
"tekelecstp","EAGLE5 45.0.0-64.49.0","2013-01-11","00:10:54","EST ","DAILY MAINTENANCE MEASUREMENTS ON SIP","LAST","2013-01-10","00:00:00","24:00:00",1
"STATUS","INVITERCVD","CANCRCVD","PROVRSPSENT","OKRSPSENT","RDRCTSENT","CLNFAILSENT","SRVERRSENT","NPSUCC","NPBYPASSSUC","INVALIDDN","NPRNNF""K",0,0,0,0,0,0,0,0,0,0,0
Assuming the data line will be:
4 char status + 11*(avg. 6 chars per field) + 2 = 72 chars
Typical file size:
230E86977 Revision 1, July 2017
ReportsMeasurements
Table 116: Typical File Size: mtcd-sip.csv
File Size=Report Data+ReportHeader+
SystemHeader
467 bytes=72+145+250
DEIR MTCD Report
The DEIR measurements specify the entity type deir and include two daily reports:
• Per system (DEIRSYS)• Per diameter connection (DEIRCONN)
Table 117: Daily Maintenance (MTCD) and Hourly Maintenance (MTCH) DEIR Measurements lists theevents added in all DEIR measurements reports.
The retention period is 7 days for the daily reports.
FTP Example Command:
rept-ftp-meas:type=mtcd:enttype=deir
Table 117: Daily Maintenance (MTCD) and Hourly Maintenance (MTCH) DEIR Measurements
UnitDescriptionEvent Name
Peg countTotal number ofME-Identity-Check requests(ECR) received by the EIR.
ECRRCV
Peg countTotal number of searches thatresulted in a match with a "whitelisted" IMEI.
WHITEIMEI
Peg countTotal number of searches thatresulted in a match with a "graylisted" IMEI.
GRAYIMEI
Peg countTotal number of searches thatresulted in a match with a "blacklisted" IMEI.
BLACKIMEI
Peg countTotal number of searches thatresulted in a match with a "black
BLKALIMEI
listed" IMEI, but were alloweddue to IMSI Check match.
Peg countTotal number of searches thatresulted in a match with a "black
BLKNALIMEI
listed" IMEI, and the IMSI in thedatabase did not match the IMSIin the message.
231E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
Peg countTotal number of searches thatresulted in a match with an"unknown" IMEI.
UNKNIMEI
Peg countTotal number of searches thatresulted in no match in thedatabase.
NOMTCHIMEI
StatusIndication of Data Validity:STATUS
K - indicates good dataI - indicates incompleteintervalN - indicates data not current
Example Output File Names:
mtcd-deirsys_yyyymmdd_2400.csvDaily DEIR system totals measurements report
mtcd-deirconn_yyyymmdd_2400.csvDaily DEIR per diameter connectionmeasurements report
FTP example output file format for DEIR system total report:
"CLLI","SWREL","RPTDATE","RPTIME","TZ","RPTTYPE","RPTPD","IVALDATE","IVALSTART","IVALEND","NUMENTIDS""tekelecstp","EAGLE5 45.1.0-64.74.1","2013-06-20","10:48:59 AM","MST ","DAILY MAINTENANCE MEASUREMENTS ON DEIR SYSTEM","SPECIFIC","2013-06-19","00:00:00","24:00:00",1
"STATUS","ECRRCV","WHITEIMEI","GRAYIMEI","BLACKIMEI","BLKALIMEI","BLKNALIMEI","UNKNIMEI","NOMTCHIMEI""K",23723,7687,0,16036,0,0,0,7687
Assuming each data line will be:
4 char status + 8 * (6 char data) + 2 = 54 chars
Typical file size is:
Table 118: Typical File Size: mtcd-deirsys.csv
File Size=Report dataReportheader
Systemheader
417 bytes=54+104+250
FTP example output file format for per diameter connection report:
"CLLI","SWREL","RPTDATE","RPTIME","TZ","RPTTYPE","RPTPD","IVALDATE","IVALSTART","IVALEND","NUMENTIDS""tekelecstp","EAGLE5 45.1.0-64.74.1","2013-06-20","10:38:59 AM","MST ","DAILY MAINTENANCE MEASUREMENTS ON DEIR PER-CONNECTION","SPECIFIC","2013-06-19","00:00:00","24:00:00",5
"STATUS","DCNAME","ECRRCV","WHITEIMEI","GRAYIMEI","BLACKIMEI","BLKALIMEI","BLKNALIMEI","UNKNIMEI","NOMTCHIMEI"
232E86977 Revision 1, July 2017
ReportsMeasurements
"K","d1",100,100,0,0,0,0,0,0"K","d2",768,768,0,0,0,0,0,768"K","d3",0,0,0,0,0,0,0,0"K","d4",500,0,0,500,0,0,0,0"K","d5",1000,0,1000,0,0,0,0,0
Assuming each data line will be:
4 char status + 18 char (Diameter connection) + 8 * (6 char data) + 2 = 72 chars
Typical file size is:
Table 119: Typical File Size: mtcd-deirconn.csv
File Size=
Report data(512
connections)
Reportheader
Systemheader
37227 bytes=36864 bytes+113+250
ENUM MTCD Report
The ENUM measurements specify the entity type enum and include four daily reports:
• Per system (ENUMSYS)
Table 120: Daily Maintenance (MTCD) and Hourly Maintenance (MTCH) ENUM System LevelMeasurements lists the events added per system.
• Per card (ENUMCARD)
Table 121: Daily Maintenance (MTCD) and Hourly Maintenance (MTCH) ENUM Card Level Measurementslists the events added for each card.
• Per entity (ENUMENT)
Table 122: Daily Maintenance (MTCD) and Hourly Maintenance (MTCH) ENUM Entity LevelMeasurements lists the events added for each entity ID in the entity ID table or each DN block inthe DN block profile table.
• Per ACL (ENUMACL)
Table 123: Daily Maintenance (MTCD) and Hourly Maintenance (MTCH) ENUM ACL Level Measurementslists the events added for each ACL entry in the ACL table.
The retention period is 24 hours.
FTP Example Command:
rept-ftp-meas:type=mtcd:enttype=enum
233E86977 Revision 1, July 2017
ReportsMeasurements
Table 120: Daily Maintenance (MTCD) and Hourly Maintenance (MTCH) ENUM System LevelMeasurements
UnitDescriptionEvent Name
Peg countTotal number of ENUM queriesreceived
ENUMQRYRX
Peg countTotal number of NAPTR queriesreceived
ENUMNAPTRRX
Peg countTotal number of NS queriesreceived
ENUMNSRX
Peg countTotal number of CNAME queriesreceived
ENUMCNAMERX
Peg countTotal number of ENUM queriesrejected by ENUM server
ENUMQRYRJTD
Peg countTotal number of ENUM queriesdiscarded due to congestion
ENUMCNGDISC
Peg countTotal number of ENUM queriesdiscarded due to ACL validationfailure
ENUMACLDISC
Peg countTotal number of successfulENUM responses sent
ENUMTXRC0
Peg countTotal number of ENUM errorresponses sent due to ENUMquery format error
ENUMTXRC1
Peg countTotal number of ENUM errorresponses sent due to ENUMserver failure
ENUMTXRC2
Peg countTotal number of ENUM errorresponses sent due tonon-existent domain error
ENUMTXRC3
Peg countTotal number of ENUM errorresponses sent due to notimplemented error
ENUMTXRC4
Peg countTotal number of ENUM errorresponses sent due to refusal byENUM server
ENUMTXRC5
Peg countTotal number ENUM responsessent with default ENUM profile
ENUMTXDEFPR
StatusIndication of Data Validity:STATUS
K indicates good dataI indicates incompleteinterval
234E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
N indicates data not current
Table 121: Daily Maintenance (MTCD) and Hourly Maintenance (MTCH) ENUM Card LevelMeasurements
UnitDescriptionEvent Name
Peg countTotal number of ENUM queriesreceived
ENUMCQRYRX
Peg countTotal number of NAPTR queriesreceived
ENUMCNAPTRX
Peg countTotal number of NS queriesreceived
ENUMCNSRX
Peg countTotal number of CNAME queriesreceived
ENUMCCNAMRX
Peg countTotal number of ENUM queriesrejected by ENUM server
ENUMCQRRJTD
Peg countTotal number of ENUM queriesdiscarded due to congestion
ENUMCCNGDSC
Peg countTotal number of ENUM queriesdiscarded due to ACL validationfailure
ENUMCACLDSC
Peg countTotal number of successfulENUM responses sent
ENUMCTXRC0
Peg countTotal number of ENUM errorresponses sent due to ENUMquery format error
ENUMCTXRC1
Peg countTotal number of ENUM errorresponses sent due to ENUMserver failure
ENUMCTXRC2
Peg countTotal number of ENUM errorresponses sent due tonon-existent domain error
ENUMCTXRC3
Peg countTotal number of ENUM errorresponses sent due to notimplemented error
ENUMCTXRC4
Peg countTotal number of ENUM errorresponses sent due to refusal byENUM server
ENUMCTXRC5
Peg countTotal number ENUM responsessent with default ENUM profile
ENUMCTXDEFP
235E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
StatusIndication of Data Validity:STATUS
K indicates good dataI indicates incompleteintervalN indicates data not current
Table 122: Daily Maintenance (MTCD) and Hourly Maintenance (MTCH) ENUM Entity LevelMeasurements
UnitDescriptionEvent Name
Peg countTotal number of ENUM queriesreceived or ENUM responsessent per entity
ENUMENTMSGS
StatusIndication of Data Validity:STATUS
K indicates good dataI indicates incompleteintervalN indicates data not current
Table 123: Daily Maintenance (MTCD) and Hourly Maintenance (MTCH) ENUM ACL LevelMeasurements
UnitDescriptionEvent Name
Peg countTotal number of ENUM queriesreceived
ENUMACLQRCV
Peg countTotal number of ENUM queriesrejected by ENUM server
ENUMACLQRJD
Peg countTotal number of successfulENUM responses sent
ENUMACLRC0
Peg countTotal number of ENUM errorresponses sent due to ENUMquery format error
ENUMACLRC1
Peg countTotal number of ENUM errorresponses sent due to ENUMserver failure
ENUMACLRC2
Peg countTotal number of ENUM errorresponses sent due tonon-existent domain error
ENUMACLRC3
Peg countTotal number of ENUM errorresponses sent due to notimplemented error
ENUMACLRC4
236E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
Peg countTotal number of ENUM errorresponses sent due to refusal byENUM server
ENUMACLRC5
StatusIndication of Data Validity:STATUS
K indicates good dataI indicates incompleteintervalN indicates data not current
Example Output File Names:
mtcd-enumsys_yyyymmdd_2400.csvDaily ENUM system totals measurements report
mtcd-enumcard_yyyymmdd_2400.csvDaily ENUM per card measurements report
mtcd-enument_yyyymmdd_2400.csvDaily ENUM per entity measurements report
mtcd-enumacl_yyyymmdd_2400.csvDaily ENUM per acl measurements report
FTP example output file format for system total report:
"CLLI","SWREL","RPTDATE","RPTIME","TZ","RPTTYPE","RPTPD","IVALDATE","IVALSTART","IVALEND","NUMENTIDS""tekelecstp","UNKNOWN ??.?.?-65.27.0","2014-08-22","22:01:32","MST ","DAILY MAINTENANCE MEASUREMENTS ON ENUM SYSTEM","LAST","2014-08-22","00:00:00","24:00:00",1
"STATUS","ENUMQRYRX","ENUMNAPTRRX","ENUMNSRX","ENUMCNAMERX","ENUMQRYRJTD","ENUMCNGDISC","ENUMACLDISC","ENUMTXRC0","ENUMTXRC1","ENUMTXRC2","ENUMTXRC3","ENUMTXRC4","ENUMTXRC5","ENUMTXDEFPR""K",2134,0,2134,0,0,0,0,2134,0,0,0,0,0,0
Assuming each data line will be:
4 char status + 14 * (6 char data) + 2 = 90 chars
Typical file size is:
Table 124: Typical File Size: mtcd-enumsys.csv
File Size=Report dataReportheader
Systemheader
529 bytes=90 bytes+189+250
FTP example output file format for per card report:
"CLLI","SWREL","RPTDATE","RPTIME","TZ","RPTTYPE","RPTPD","IVALDATE","IVALSTART","IVALEND","NUMENTIDS""tekelecstp","UNKNOWN ??.?.?-65.27.0","2014-08-22","22:01:35","MST ","DAILY MAINTENANCE MEASUREMENTS ON ENUM PER-CARD","LAST","2014-08-22","00:00:00","24:00:00",2
"STATUS","LOC","ENUMCQRYRX","ENUMCNAPTRX","ENUMCNSRX","ENUMCCNAMRX","ENUMCQRRJTD","ENUMCCNGDSC","ENUMCACLDSC","ENUMCTXRC0","ENUMCTXRC1","ENUMCTXRC2","ENUMCTXRC3","ENUMCTXRC4","ENUMCTXRC5","ENUMCTXDEFP"
237E86977 Revision 1, July 2017
ReportsMeasurements
"K","1101",2134,0,2134,0,0,0,0,2134,0,0,0,0,0,0"K","1105",0,0,0,0,0,0,0,0,0,0,0,0,0,0
Assuming each data line will be:
4 char status + 7 char (card) + 14 * (6 char data) + 2 = 95 chars
Typical file size is:
Table 125: Typical File Size: mtcd-enumcard.csv
File Size=Report data(250 card)
Reportheader
Systemheader
24203 bytes=23750 bytes+203+250
FTP example output file format for per entity report:
"CLLI","SWREL","RPTDATE","RPTIME","TZ","RPTTYPE","RPTPD","IVALDATE","IVALSTART","IVALEND","NUMENTIDS""tekelecstp","UNKNOWN ??.?.?-65.27.0","2014-08-22","22:01:33","MST ","DAILY MAINTENANCE MEASUREMENTS ON ENUM PER-ENTITY","LAST","2014-08-22","00:00:00","24:00:00",2
"STATUS","ENTITY ID","SDN","EDN","ENUMENTMSGS""K","123456789012345","","",0"K","123456789123456","","",2134
Assuming each data line will be:
4 char status + 3* (18 char Entity ID/SDN/EDN) + (6 char data) + 2 = 66 chars
Typical file size is:
Table 126: Typical File Size: mtcd-enument.csv
File Size=
Report data(1024
entries)
Reportheader
Systemheader
67882 bytes=67584 bytes+48+250
FTP example output file format for per ACL report:
"CLLI","SWREL","RPTDATE","RPTIME","TZ","RPTTYPE","RPTPD","IVALDATE","IVALSTART","IVALEND","NUMENTIDS""tekelecstp","UNKNOWN ??.?.?-65.27.0","2014-08-22","22:01:34","MST ","DAILY MAINTENANCE MEASUREMENTS ON ENUM PER-ACL","LAST","2014-08-22","00:00:00","24:00:00",1
"STATUS","IP ADDRESS","ENUMACLQRCV","ENUMACLQRJD","ENUMACLRC0","ENUMACLRC1","ENUMACLRC2","ENUMACLRC3","ENUMACLRC4","ENUMACLRC5""K","10.*.*.*",2134,0,2134,0,0,0,0,0
Assuming each data line will be:
4 char status + 18 char (IP Address) + 8 * (6 char data) + 2 = 72 chars
238E86977 Revision 1, July 2017
ReportsMeasurements
Typical file size is:
Table 127: Typical File Size: mtcd-enumacl.csv
File Size=Report data(100 entries)
Reportheader
Systemheader
7579 bytes=7200 bytes+129+250
SFTHROT MTCD Report
The entity type for SFTHROT measurements is SFTHROT, which generates one report per period.
The measurement report supported is:
• Per Throttling Action System Totals
The measurement report Type supported is:
• MTCD - Daily measurement report type
Example Commands:
FTP: rept-ftp-meas:type=mtcd:enttype=sfthrot
Table 128: Daily Maintenance (MTCD) and Day-To-Hour Maintenance (MTCDTH) Measurements
UnitDescriptionEvent Name
peg countThe total number of messagesserviced by a particularThrottling GTT Action.
GTTATHTO
peg countThe total number of messagesdiscarded because the Throttling
GTTATHDI
GTT Action was in BLOCKEDstate.
FTP Example Output File Name:mtcd-sfthrot_20150813_2400.csv
FTP Example Output File Format:
"CLLI","SWREL","RPTDATE","RPTIME","TZ","RPTTYPE","RPTPD","IVALDATE","IVALSTART","IVALEND","NUMENTIDS"<cr><lf>"tekelecstp","EAGLE5 46.3.0.0.0-66.8.0","8/14/2015","0:00:03","EST" , "DAILY MAINTENANCE MEASUREMENTS ON SFTHROT","LAST","8/13/2015","0:00:00","24:00:00",32<cr><lf>
"STATUS","THROTTLING ACTION","GTTATHTO","GTTATHDI"<cr><lf>"K","sf1",0,0<cr><lf>. . . . .
"K","sf32",0,0<cr><lf>
Assuming the data line will be:
4 char status + 12 char TA + 2 * (6 char data) + 2 = 30 chars
239E86977 Revision 1, July 2017
ReportsMeasurements
Typical file size:
Table 129: Typical File Size: mtcd-sfthrot.csv
File Size=
Report Data(32
ThrottlingActions)+
ReportHeader+
SystemHeader
1262 bytes=960 bytes+52+250
Day-to-Hour Maintenance Measurements (MTCDTH)
The Maintenance Day-to-Hour (MTCDTH) report provides the current value of various maintenancemeasurements accumulating during the day.
Entity Types:STP, Link, Lnkset, STPLAN, SCTPASOC, SCTPCARD, UA
Accumulation Interval: Cumulative Daily Total to the last full hour.
STP Retention Period: 1 hour
Reporting Mode: On-demand
Accessible Collection Periods: Last
STP MTCDTH Report
Example Commands:
UI: rept-meas:type=mtcdth:enttype=stpFTP: rept-ftp-meas:type=mtcdth:enttype=stp
Table 130: Daily Maintenance (MTCD) and Day-To-Hour Maintenance (MTCDTH) Measurements
UnitDescriptionEvent Name
peg countCritical System Alarms - Thetotal number of critical systemalarms.
CRSYSAL
secondsCumulative DurationofSignaling Link DeclaredFailures All Types -
DRDCLFLR
The cumulative duration of alllink failures.
secondsDuration ofLink Outage - Thetotal time a link was unavailableto MTP level 3 for any reason.
DURLKOTG
240E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
peg countDTAMSUsLost - The totalnumber of MSUs that were
DTAMSULOST
discarded because the redirectfunction was turned off or theoriginal MSU was too large to beencapsulated.
peg countG-FlexGTTs with Match - Thetotal number of G-Flex Global
GFGTMATCH
Title Translation successfullycompleted.
peg countG-FlexGTTs No Match - Thetotal number of G-Flex Global
GFGTNOMCH
Title Translations completed thatdid not match an entry in theGSM database.
peg countG-FlexGTTs No Look-up - Thetotal number of G-Flex Global
GFGTNOLKUP
Title Translations that could notbe looked up in the GSMdatabase because of an error, i.e.,when the G-Flex SCCP CdPAverification fails.
peg countGTTs Performed - Usually, thetotal number of MSUs that
GTTPERFD
successfully completed globaltitle translation (GTT). Alsoincludes G-Port and INPMSUsthat got a match in either theG-Port, INP, or GTT DB.
Sometimes, GTTPERFD indicatesthe total number of global titletranslations (GTTs) performedon MSUs that successfullycompleted GTT, because severalGTTs may happen for the sameMSU. One scenario wheremultiple GTTs occur for an MSUoccurs is when the ANSI/ITUSCCP Conversion Feature isactivated. In this case, the countfor GTTPERFD can be doublewhat it would be without thefeature, although the number ofMSUs received by the EAGLEdid not change.
241E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
peg countGTTs Unable to Perform -Diagnostic 0: No Translation for
GTTUN0NS
Address of Such Nature – Totalnumber of times that thespecified translation type in anMSU was not supported by theSTP or the form of the GTT wasincorrect for the giventranslation type. Also includesG-Flex, INP and GTT MSUs thatdid not match on new selectors(GTI,NP,NAI) in addition toones not matching on TT.
peg countGTTs Unable to Perform -Diagnostic 1: No Translation for
GTTUN1NT
This Address – The sum total oftimes that SCCP could not finda translation in the translationtable. This includes Global Titletranslations, Point Codetranslations, and Subsystemtranslations.
In general, this register containsthe sum of the GTTUN1NTregister in the systot-tt reportand the CGGTTUN1NT
peg countMSUs Relayed - Total numberof IDP messages relayed to theirdestination.
MSIDPNOMCH
peg countMSUs Returned – Total numberof IDP messages returned to
MSIDPMATCH
originating MSC. Thesemessages bypass the prepaidengine since it has beendetermined that they meet thecriteria for subscribers withunlimited prepaid calling plan.
peg countMSUs Rcvd – InvalidDPC -MSINVDPC
Number of MSUs received anddiscarded because the DPCcould not be found in the STProuting table.
peg countMSUs Discarded – InvalidSIF -Number of MSUs that have been
MSINVSIF
242E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
received and discarded becauseof an invalid SIF.
peg countMSUs Rcvd – Invalid ServiceIndicator Octet (SIO) -
MSINVSIO
Number of MSUs received anddiscarded because the servicerequested in the service indicatoroctet (SIO) was not supported bythe STP.
peg countMajor system alarms - The totalnumber of major system alarms.
MASYSAL
peg countMinor system alarms - The totalnumber of minor system alarms.
MISYSAL
peg countMSUs Discarded – InvalidLink- Number of MSUs discarded
MSINVLNK
because of an incorrect SLC. (TheSLC refers to a nonexistent linkor the same link.)
peg countMSUs Discarded – InvalidSLC-
MSINVSLC
Number of MSUs discardedbecause of an invalid SLC codein the ECO/COO.
peg countMSUs Discarded –InaccessibleDPC -
MSNACDPC
The total number of MSUsdiscarded because of aninaccessible DPC.
peg countMSUs Discarded – RoutingFailure -
MSSCCPFL
Number of MSUs discarded dueto an SCCP routing failure. Alsoincludes G-Flex, INP MSUs thatgot a match from either theG-Flex, INP or GTT DB butcannot be routed due to PC or SScongestion, PC or SS unavailable,SS unequipped, or anunqualified error.
243E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
peg countMSUSCCP Failure - Total MSUsDiscarded Due to SCCPConversion Failure.
MSUSCCPFLR
peg countMSUs Discarded –GatewayScreening -
MSUDSCRD
The total number of MSUs thatfailed gateway screening andwere discarded. See linksetreport for individual peg counts.
peg countMSUs Discarded – Level2/Level 3 Queue Full -
MSULOST1
Number of MSUs discardedbecause the level 2 to level 3queue was full.
peg countMSUs Discarded –Route OnHold Buffer Overflow -
MSULOST2
Number of MSUs discardedbecause the routing buffer wasin overflow.
peg countMSUs Discarded –MSULOST3
1. LS On Hold BufferOverflow - The number ofMSUs discarded because thelinkset-on-hold buffer was inoverflow. The On HoldBuffer is used duringchangeover/changebacksituations to ensure thattraffic is sequenced correctly.During changeover andchangeback, MSUs that wereoriginally sent over linkswhich are now failed (notIS-NR) are buffered while thechangeover/changebackprocedures are carried out.Once those procedures arecompleted, the traffic in theon-hold buffer is routedbased on the currentconfiguration.
2. LSL LIM does not have SCCPassignment for receivedSCCP traffic.
244E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
3. HSL –
• All Class 1 (sequenced)GTT traffic addressed toEAGLE
• A Class 0 GTT messagefor EAGLE arrives whenthe SCCP TVG queue isfull
• A GTT message in theSCCP TVG queue is morethan 2 seconds old.
peg countMSUs Discarded – Rcv QueueFull -
MSULOST4
Number of MSUs discardedbecause the receive queue wasfull.
peg countMSUs Discarded –LIM Init -MSULOST5
Number of MSUs discardedwhile the LIM card wasinitializing.
peg countMSUs Discarded – The numberof MSUs discarded due to an
MSULOST6
error encountered duringinternal (IMT) transfer of MSUbetween cards.
peg countMTP Restarts Initiated -Number of times MTP restart
MTPRESTS
was initiated by the STP. Thecount does not include thenumber of MTP restarts initiatedas a result of messages fromadjacent nodes.
peg countMSUs Originated - Invalid DPC- The number of MSUsoriginated with an invalid DPC.
OMSINVDPC
peg countOriginatedMSUs -ORIGMSUS
The total number of outgoingMSUs successfully passed toMTP level 2 for transmission,while carrying the STP pointcode in the OPC field. For IPGWlinks, this register includes
245E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
counts for managementmessages such as RST messages.This register is not an aggregateof link or linkset registers.
peg countOversizedMTP 3 Messages -Oversized MTP 3 messages
OVSZMSG
exceeding 272 octets (level 3) thatare received by an HSL and arediscarded.
peg countThe total number of times that aGTT translation matched a
SCCPLOOP
Point Code in the STP’s loopsetentries resulting in either a notifyor discard of an SCCP message.
statusIndication of Data Validity:STATUS
K indicates good dataI indicates incompleteintervalN indicates data not current
peg countThrough-SwitchedMSUs -THRSWMSU
The total number of MSUs thatdid not carry the STP point codein the OPC or the DPC, and weresuccessfully passed to MTP level2 for transmission.
peg countTerminatedMSUs - The totalnumber of incoming MSUs
TRMDMSUS
carrying the STP point code inthe DPC.
peg countTranslation Type MappingTranslations Performed - The
TTMAPPF
total number of Translation TypeMapping translations performed(that is, a mapped SS7 messagetranslation type was found forthe existing SS7 messagetranslation type).
peg countTotal number of messages forwhich UDT(S) to XUDT(S),
UDTXUDTF
XUDT(S) to UDT(S) orSegmented XUDT(S) to UDT(S)conversion has failed.
246E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
peg countX-List Entry Not Created - Thetotal number of times that an
XLXTELEI
X-List entry was not createdbecause the ELEI for the clusterwas set to ‘yes’.
peg countX-List Entry Not Created - Thetotal number of times an X-List
XLXTSPACE
entry was not created due to lackof space in the route/destinationtable.
UI Reports
UI Example Output:
e1061001 11-01-23 01:10:37 MST EAGLE5 43.0.0-63.49.0 TYPE OF REPORT: DAY-TO-HOUR MAINTENANCE MEASUREMENTS ON STP REPORT PERIOD: LAST REPORT INTERVAL: 11-01-23, 00:00:00 THROUGH 00:59:59
STP-MTCDTH MEASUREMENTS
These measurements are from 11-01-23, 00:00:00 through 00:59:59. ORIGMSUS = 0, TRMDMSUS = 0, THRSWMSU = 0, MTPRESTS = 0, DTAMSULOST = 0, MSINVDPC = 0, MSINVSIO = 0, OMSINVDPC = 0, MSINVLNK = 0, MSINVSIF = 0, MSNACDPC = 0, MSINVSLC = 0, GTTPERFD = 0, GTTUN0NS = 0, GTTUN1NT = 0, MSSCCPFL = 0, MSULOST1 = 0, MSULOST2 = 0, MSULOST3 = 0, MSULOST4 = 0, MSULOST5 = 0, DRDCLFLR = 0, DURLKOTG = 888, CRSYSAL = 2, MASYSAL = 3, MISYSAL = 19, XLXTSPACE = 0, XLXTELEI = 0, TTMAPPF = 0, MSUDSCRD = 0, OVSZMSG = 0, GFGTMATCH = 0, GFGTNOMCH = 0, GFGTNOLKUP = 0, MSUSCCPFLR = 0, MSSCCPDISC = 0, MSIDPNOMCH = 0, MSIDPMATCH = 0, MSULOST6 = 0, SCCPLOOP = 0, UDTXUDTF = 0
;
FTP Reports
FTP Example Output File Name: mtcdth-stp_19990117_1500.csv
FTP Example Output File Format:
"CLLI","SWREL","RPTDATE","RPTIME","TZ","RPTTYPE","RPTPD","IVALDATE","IVALSTART","IVALEND","NUMENTIDS""e1061001","EAGLE5 43.0.0-63.49.0","2011-01-23","01:11:39","MST ","DAY-TO-HOUR MAINTENANCE MEASUREMENTS ON STP","LAST","2011-01-23","00:00:00","01:00:00",1
"STATUS","ORIGMSUS","TRMDMSUS","THRSWMSU","MTPRESTS","DTAMSULOST","MSINVDPC","MSINVSIO","OMSINVDPC","MSINVLNK","MSINVSIF","MSNACDPC","MSINVSLC","GTTPERFD","GTTUN0NS","GTTUN1NT","MSSCCPFL","MSULOST1","MSULOST2","MSULOST3","MSULOST4","MSULOST5","DRDCLFLR","DURLKOTG","CRSYSAL","MASYSAL","MISYSAL","XLXTSPACE","XLXTELEI","TTMAPPF","MSUDSCRD","OVSZMSG","GFGTMATCH","GFGTNOMCH","GFGTNOLKUP",
247E86977 Revision 1, July 2017
ReportsMeasurements
"MSUSCCPFLR","MSSCCPDISC","MSIDPNOMCH","MSIDPMATCH","MSULOST6","SCCPLOOP","UDTXUDTF""K",0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,888,2,3,19,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
Typical file size:
Table 131: Typical File Size: mtcdth-stp.csv
File Size=Report data+Reportheader+System
header
985 bytes=252+583+250
LINK MTCDTH Report
Certain registers are reported for MTP2, SAAL, IPVL, and IPVHSL classes. These registers aresummarized in Table 132: Registers Reported per LINK CLASS for Daily (MTCD) and Day-To-Hour(MTCDTH) Link Measurements.
Table 132: Registers Reported per LINK CLASS for Daily (MTCD) and Day-To-Hour (MTCDTH)Link Measurements
IPVHSL ClassIPVLGW ClassIPVL ClassSAAL ClassMTP2 ClassEvent Name
XXXXXACHGOVRS
XXDRBSYLNK
XXXXXDRDCLFLR
XXDRFEPRO
XXXXXDRLCLPRO
XXXDRLKINHB
XXXXXECCNGLV1
XXXXXECCNGLV2
XXXXXECCNGLV3
XECLNKCB
XECLNKXCO
XXXFARMGINH
XXXLMSUOCTRCV
XXXLMSUOCTTRN
XXXLMSURCV
248E86977 Revision 1, July 2017
ReportsMeasurements
IPVHSL ClassIPVLGW ClassIPVL ClassSAAL ClassMTP2 ClassEvent Name
XXXLMSURCVDSC
XXXLMSUTRN
XXXLMSUTRNDSC
XXXXXLNKAVAIL
XM2PLKNIS
XM2PUDMRC
XM2PUDMTR
XM2PUDOCR
XM2PUDOCT
XXXXXMOCTRCVD
XXXXXMOCTTRAN
XXXXXMSGDISC0
XXXXXMSGDISC1
XXXXXMSGDISC2
XXXXXMSGDISC3
XXXXXMSGSRCVD
XXXXXMSGSTRAN
XMSURCERR
XMSURETRN
XNDCFLABN
XXXNDCFLXDA
XXXNDCFLXDC
XXNDCFLXER
XXXNEARMGIH
XNEGACKS
XXXXXNMLCLPRO
XXXXXNMDCLFLR
249E86977 Revision 1, July 2017
ReportsMeasurements
IPVHSL ClassIPVLGW ClassIPVL ClassSAAL ClassMTP2 ClassEvent Name
XXNMFEPRO
XOCTRETRN
XPCRN1N2EXC
XSDPDURTR
XXXXXTDCNGLV1
XXXXXTDCNGLV2
XXXXXTDCNGLV3
XXXXXTLNKACTV
Command Examples
• UI
rept-meas:type=mtcdth:enttype=link:loc=xxxx:link=x
rept-meas:type=mtcdth:enttype=link:lsn=lsn123
• FTP
rept-ftp-meas:type=mtcdth:enttype=link
Measurement Events
Table 133: Maintenance Daily (MTCD) and Maintenance Day-to-Hour (MTCDTH) LinkMeasurements
UnitDescriptionEvent Name
peg countNumber of AutomaticChangeovers - Number of times
ACHGOVRS
that a changeover procedure wasused to divert traffic from onelink to alternative links.
secondsCumulative Duration of BusyLink Status-
DRBSYLNK
The total elapsed time betweenthe receipt of a busy LSSU, andwhen the next message wasacknowledged. This is the sumof all occurrences of busy linkstatus. Reported for MTP2 Linksonly.
250E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
secondsCumulative Duration ofSignaling Link Declared
DRDCLFLR
Failures All Types - Thecumulative duration of all linkfailures.
secondsDuration of Far-End ProcessorOutage -
DRFEPRO
The cumulative duration that alink was unavailable to MTPlevel 3 because of a processoroutage at the far-end networkelement (SIPO received).Reported for MTP2 and IPVHSLclass links ONLY.
secondsDuration of Local ProcessorOutage -
DRLCLPRO
The cumulative duration that alink was unavailable to MTPlevel 3 because of a processoroutage at the near-end networkelement.
secondsDuration Link Inhibited - Thecumulative duration that a link
DRLKINHB
was inhibited at the local orfar-end network element.
peg countEvent Count for Entering Level1 Link Congestion - The total
ECCNGLV1
number of times that linkcongestion level 1 was entered.
peg countEvent Count for Entering Level2 Link Congestion - The total
ECCNGLV2
number of times that linkcongestion level 2 was entered.
peg countEvent Count for Entering Level3 Link Congestion - The total
ECCNGLV3
number of times that linkcongestion level 3 was entered.
peg countNumber of times the linkperformed ChangeBack
ECLNKCB
procedures, includingtime-controlled ChangeBacks.
251E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
peg countNumber of times the linkperformed Extended
ECLNKXCO
ChangeOver procedure,including time-controlledChangeOvers.
peg countNumber of Far-EndManagement Inhibits - Number
FARMGINH
of times a link was inhibitedsuccessfully from the far-end.
peg countTotal number of messages thatare sent from a GTT enabledIPSG card to an SCCP card.
GTTFORSM
peg countTotal number of messages onwhich GTT is performed on aGTT enabled IPSG card.
GTTONLIM
octetsThe number of octets receivedin large MSUs. This register is
LMSUOCTRCV
pegged in addition toMOCTRCVD when the LargeMSU Support for IP Signalingfeature status is on and a largeMSU is successfully received.
octetsThe number of octetstransmitted in large MSUs. This
LMSUOCTTRN
register is pegged in addition toMOCTTRAN when the LargeMSU Support for IP Signalingfeature status is on and a largeMSU is successfully transmitted.
peg countThe number of large MSUsreceived. This register is pegged
LMSURCV
in addition to MSGSRCVD whenthe Large MSU Support for IPSignaling feature status is on anda large MSU is successfullyreceived.
peg countThe number of large MSUsdiscarded in the receive path.
LMSURCVDSC
This can occur when the LargeMSU Support for IP Signalingfeature is not on or when theMSU is larger than 4095 bytes orwhen a routing failure occurs.
252E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
peg countThe number of large MSUstransmitted. This register is
LMSUTRN
pegged in addition toMSGSTRAN when the LargeMSU Support for IP Signalingfeature status is on and a largeMSU is successfully transmitted.
peg countThe number of large MSUsdiscarded in the transmit path.
LMSUTRNDSC
secondsLink Available Time - The totaltime the link was available toMTP level 3.
LNKAVAIL
msecM2PA Link Not-in-ServiceDurationThe duration the link
M2PLKNIS
was not in the in-service (INS)state at the M2PA layer (inseconds), i.e., during which thelink was in any of the otherdefined M2PA states (such asIDLE, OOS, AIP, PROVING,ALIGNED READY, orRETRIEVAL).
peg countThe number of M2PA UDMsreceived.
M2PUDMRC
peg countThe number of M2PA User DataMessages (UDMs) transmitted.
M2PUDMTR
octetsThe number of M2PA UDMoctets received.
M2PUDOCR
octetsThe number of M2PA User DataMessage (UDM) octetstransmitted.
M2PUDOCT
octetsMessage Octets Received -MOCTRCVD
Total number of octets associatedwith Messages received,including those removed forMTP level 2 processing andthose for which retransmissionhas been requested.
• For SAAL, IPVL, IPVHSL,and IPVLGW class linksets -
253E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
applies to MTP level 3message bytes.
octetsMessage Octets Transmitted -Total number of octets associated
MOCTTRAN
with MSUs transmitted to thefar-end. For all linkset classes,this includes octets for MTP level3 SIO and SIF.
• For MTP2 class linksets,octets included are thoseassociated with Messagestransmitted ANDacknowledged by level 2, aswell as any retransmittedMessages. Additional octetsincluded are MTP level 2 flag,BSN/BIB, FSN/BIB, LI, andCRC octets.
• For SAAL and IPVHSL classlinksets, octets are notincluded until the Message isacknowledged by level 2.
• For IPVL and IPVLGW classlinks, octets are not includeduntil the Message istransmitted by level 2. ForIPVLGW class linksets, SNMs(Messages with SI=0) areNOT included.
peg countFor ANSI links: Priority 0 MSUsDiscarded Due to Congestion -
MSGDISC0
The total number of priority 0MSUs discarded due tocongestion (any level).
• For SAAL class links, appliesto MTP level 3 messages .
Note: EAGLE supports this oneITU discard counter only. Whenthe discard threshold is reached,all MSUs are discarded andcounted in this register. Prior tothe discard threshold beingreached, no MSUs are discarded.
254E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
Note: The MSUs or Messagesmay be discarded on thetransmit/outbound link, whichindicates congestion via theECCNGLVLx or TDCNGLVxregisters or it may appear oninbound links routing traffic tothose congested links. The latterwill not indicate eitherECCNGLVLx or TDCNGLVx.
peg countFor ANSI links: Priority 1 MSUsDiscarded Due to Congestion -
MSGDISC1
The total number of priority 1MSUs discarded due tocongestion (any level).
• For SAAL class links, appliesto MTP level 3 messages .
For ITU links: this register is notapplicable.
Note: The MSUs or Messagesmay be discarded on thetransmit/outbound link, whichindicates congestion via theECCNGLVLx or TDCNGLVxregisters or it may appear oninbound links routing traffic tothose congested links. The latterwill not indicate eitherECCNGLVLx or TDCNGLVx.
peg countFor ANSI links: Priority 2 MSUsDiscarded Due to Congestion -
MSGDISC2
The total number of priority 2MSUs discarded due tocongestion (any level).
• For SAAL class links, appliesto MTP level 3 messages .
For ITU links: this register is notapplicable.
Note: The MSUs or Messagesmay be discarded on thetransmit/outbound link, whichindicates congestion via theECCNGLVLx or TDCNGLVxregisters or it may appear oninbound links routing traffic to
255E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
those congested links. The latterwill not indicate eitherECCNGLVLx or TDCNGLVx.
peg countFor ANSI links: Priority 3 MSUsDiscarded Due to Congestion -
MSGDISC3
The total number of priority 3MSUs discarded due tocongestion (any level).
• For SAAL class links, appliesto MTP level 3 messages .
For ITU links: this register is notapplicable.
Note: The MSUs or Messagesmay be discarded on thetransmit/outbound link, whichindicates congestion via theECCNGLVLx or TDCNGLVxregisters or it may appear oninbound links routing traffic tothose congested links. The latterwill not indicate eitherECCNGLVLx or TDCNGLVx.
peg countMSUs Received - Total numberof MSUs received, including
MSGSRCVD
those for which retransmissionhas been requested.
• For SAAL, IPVL, IPVHSL,and IPVLGW class linksets -applies to MTP level 3messages.
peg countMSUs Transmitted -MSGSTRAN
Total number of MSUstransmitted to the far-end,including retransmissions.
• For MTP2 class links, MSUstransmitted ANDacknowledged by level 2.
• For SAAL, IPVL, IPVHSL,and IPVLGW class linksets,MTP level 3 messages offeredfor transmission after anyrequired conversion from
256E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
their respective M2PA,M3UA, or SUA formats.
peg countNumber of Message signalUnits received in error - bad
MSURCERR
CRC. This register applies toMTP2 links only.
peg countMSUs Retransmitted - Numberof MSUs retransmitted becauseof errors.
MSURETRN
peg countNumber of Signaling LinkFailures - Abnormal FIB/BSN -
NDCFLABN
The number of times thesignaling link was takenout-of-service because ofabnormal FIB/BSN received. Acount was accumulated if twobackward sequence numbervalues in three consecutivelyreceived MSUs or FISUs are notthe same as the previous one orany of the forward sequencenumbers of the signal units inthe retransmission buffer at thetime they are retransmitted.Reported for MTP2 links only.Occurrences of this conditionwhile the link is not in-serviceare not accumulated in thisregister.
peg countNumber of Signaling LinkFailures - Excessive Delay of
NDCFLXDA
Acknowledgment - Number oftimes a signaling link wasout-of-service due to anexcessive delay inacknowledgments.
• For MTP2and IPVHSL classlinks, level 2 t7 expired level
• For SAAL class links, timerNO_RESPONSE expired forPOLL/STAT response
• Not reported for IPVL andIPVLGW class links
257E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
peg countNumber of Signaling LinkFailures - Excessive Duration ofCongestion
NDCFLXDC
• For MTP2 and IPVHSL classlinks, the number of times asignaling link wasout-of-service because theLevel 2 timer T6 (remotecongestion) expired
• For SAAL class links, thenumber of times timerNO_CREDIT expired
• Not reported for IPVL andIPVLGW class links
peg countNumber of Signaling LinkFailures - Excessive Error Rate
NDCFLXER
- Number of times a signalinglink was out-of-service becauseit reached the signal unit errorrate monitor (SUERM) threshold.Reported for MTP2 and SAALlinks only.
peg countNumber of Near-EndManagement Inhibits - Number
NEARMGIH
of times a link was unavailableto MTP level 3 because it waslocally inhibited. Not reportedfor IPVL and IPVLGW classlinks.
peg countNumber of NegativeAcknowledgments Received
NEGACKS
-Number of times the BSN in anMSU was inverted, indicating aretransmission request. Thisregister is NOT applicable toHSLs.
peg countNumber of Local ProcessorOutages - The total number of
NMLCLPRO
local processor outages in thisSTP.
peg countNumber ofSignalingLinkDeclared Failures All
NMDCLFLR
Types - The cumulative total ofall link failures.
258E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
peg countNumber of Far-End ProcessorOutages -
NMFEPRO
Number of far-end processoroutages that have occurred.Reported for MTP2 links only
peg countNumber of MSU octetsretransmitted. This register is
OCTRETRN
NOT reported for SAAL classlinks.
peg countPCR N1 or N2 Count Exceeded- The total number of forced
PCRN1N2EXC
retransmissions when preventivecyclic retransmission (PCR) isused as the error correctionmethod on a link. This registeris not applicable to HSLs.
peg countSSCOP SD PDUs Retransmitted- The number of SSCOP
SDPDURTR
sequenced Data PDUs that wereretransmitted, based on anaccumulated count of suchretransmissions conveyed to LM.This measurement replaces theMTP level 2 negativeacknowledgments.
statusIndication of Data Validity:STATUS
K indicates good dataI indicates incompleteintervalN indicates data not current
secondsTotal Duration of Level 1 LinkCongestion - The total time thelink was in level 1 congestion.
TDCNGLV1
secondsTotal Duration of Level 2 LinkCongestion - The total time thelink was in level 2 congestion.
TDCNGLV2
secondsTotal Duration of Level 3 LinkCongestion - The total time thelink was in level 3 congestion.
TDCNGLV3
259E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
secondsLink active time - total time thelink is active and transmittingMSUs.
TLNKACTV
• For SAAL class links, thetime the link is active andgiving MSUs to SAAL fortransmission.
• For IP7 links, TLNKACTV isbased on 10MB Ethernet linkspeed. Hence the report willbe relative to 10MB/sec.
UI Reports
• rept-meas:type=mtcdth:enttype=link:loc=xxxx:link=x
tekelecstp 12-02-12 00:07:37 EST EAGLE5 44.0.0 TYPE OF REPORT: DAILY MAINTENANCE MEASUREMENTS ON LINK REPORT PERIOD: LAST REPORT INTERVAL: 12-02-11 00:00:00 THRU 23:59:59
LINK-MTCD MEASUREMENTS: LOC: 1203, LINK: A , LSN: hcmimt1 (MTP2-UNCH)
MSGSTRAN = 0, MSGSRCVD = 0, MSURETRN = 0, OCTRETRN = 0, MOCTTRAN = 0, MOCTRCVD = 0, TDCNGLV1 = 0, TDCNGLV2 = 0, TDCNGLV3 = 0, ECCNGLV1 = 0, ECCNGLV2 = 0, ECCNGLV3 = 0, MSGDISC0 = 0, MSGDISC1 = 0, MSGDISC2 = 0, MSGDISC3 = 0, TLNKACTV = 0, LNKAVAIL = 0, ACHGOVRS = 0, NEARMGIH = 0, FARMGINH = 0, NMDCLFLR = 0, DRDCLFLR = 0, SURCVERR = 0, NEGACKS = 0, DRLKINHB = 0, NDCFLABN = 0, NDCFLXDA = 0, NDCFLXER = 0, NDCFLXDC = 0, NMFEPRO = 0, NMLCLPRO = 0, DRFEPRO = 0, DRLCLPRO = 0, MSURCERR = 0, DRBSYLNK = 0, PCRN1N2EXC = 0
;
tekelecstp 12-02-12 00:07:40 EST EAGLE5 44.0.0 LINK-MTCD MEASUREMENTS: LOC: 1103, LINK: A , LSN: ipsg (IPVL)
MSGSTRAN = 0, MSGSRCVD = 0, MOCTTRAN = 0, MOCTRCVD = 0, TDCNGLV1 = 0, TDCNGLV2 = 0, TDCNGLV3 = 0, ECCNGLV1 = 0, ECCNGLV2 = 0, ECCNGLV3 = 0, MSGDISC0 = 0, MSGDISC1 = 0, MSGDISC2 = 0, MSGDISC3 = 0, TLNKACTV = 0, LNKAVAIL = 0, ACHGOVRS = 0, NMDCLFLR = 0, DRDCLFLR = 0, NMLCLPRO = 0, DRLCLPRO = 0, LMSUTRN = 0, LMSURCV = 0, LMSUOCTTRN = 0, LMSUOCTRCV = 0, LMSUTRNDSC = 0, LMSURCVDSC = 0
;
tekelecstp 12-02-12 00:07:42 EST EAGLE5 44.0.0 LINK-MTCD MEASUREMENTS: LOC: 1104, LINK: A , LSN: mtp2 (MTP2)
260E86977 Revision 1, July 2017
ReportsMeasurements
MSGSTRAN = 0, MSGSRCVD = 0, MSURETRN = 0, OCTRETRN = 0, MOCTTRAN = 0, MOCTRCVD = 0, TDCNGLV1 = 0, TDCNGLV2 = 0, TDCNGLV3 = 0, ECCNGLV1 = 0, ECCNGLV2 = 0, ECCNGLV3 = 0, MSGDISC0 = 0, MSGDISC1 = 0, MSGDISC2 = 0, MSGDISC3 = 0, TLNKACTV = 0, LNKAVAIL = 0, ACHGOVRS = 0, NEARMGIH = 0, FARMGINH = 0, NMDCLFLR = 0, DRDCLFLR = 0, SURCVERR = 0, NEGACKS = 0, DRLKINHB = 0, NDCFLABN = 0, NDCFLXDA = 0, NDCFLXER = 0, NDCFLXDC = 0, NMFEPRO = 0, NMLCLPRO = 0, DRFEPRO = 0, DRLCLPRO = 0, MSURCERR = 0, DRBSYLNK = 0, PCRN1N2EXC = 0
;
tekelecstp 12-02-12 00:07:44 EST EAGLE5 44.0.0 LINK-MTCD MEASUREMENTS: LOC: 1105, LINK: A , LSN: ssedcm1 (IPVHSL)
MSGSTRAN = 0, MSGSRCVD = 0, MOCTTRAN = 0, MOCTRCVD = 0, TDCNGLV1 = 0, TDCNGLV2 = 0, TDCNGLV3 = 0, ECCNGLV1 = 0, ECCNGLV2 = 0, ECCNGLV3 = 0, MSGDISC0 = 0, MSGDISC1 = 0, MSGDISC2 = 0, MSGDISC3 = 0, TLNKACTV = 0, LNKAVAIL = 0, ACHGOVRS = 0, NEARMGIH = 0, FARMGINH = 0, NMDCLFLR = 0, DRDCLFLR = 0, DRLKINHB = 0, NDCFLXDA = 0, NDCFLXDC = 0, NMFEPRO = 0, NMLCLPRO = 0, DRFEPRO = 0, DRLCLPRO = 0, DRBSYLNK = 0, LMSUTRN = 0, LMSURCV = 0, LMSUOCTTRN = 0, LMSUOCTRCV = 0, LMSUTRNDSC = 0, LMSURCVDSC = 0, M2PUDMTR = 0, M2PUDOCT = 0, M2PUDMRC = 0, M2PUDOCR = 0, M2PLKNIS = 1281, ECLNKCB = 0, ECLNKXCO = 0
;
tekelecstp 12-02-12 00:07:46 EST EAGLE5 44.0.0 LINK-MTCD MEASUREMENTS: LOC: 1112, LINK: A , LSN: saal (SAAL)
MSGSTRAN = 0, MSGSRCVD = 0, MOCTTRAN = 0, MOCTRCVD = 0, TDCNGLV1 = 0, TDCNGLV2 = 0, TDCNGLV3 = 0, ECCNGLV1 = 0, ECCNGLV2 = 0, ECCNGLV3 = 0, MSGDISC0 = 0, MSGDISC1 = 0, MSGDISC2 = 0, MSGDISC3 = 0, TLNKACTV = 0, LNKAVAIL = 0, ACHGOVRS = 0, NEARMGIH = 0, FARMGINH = 0, NMDCLFLR = 0, DRDCLFLR = 0, SURCVERR = 0, DRLKINHB = 0, NDCFLXDA = 0, NDCFLXER = 0, NDCFLXDC = 0, NMLCLPRO = 0, DRLCLPRO = 0, SDPDURTR = 0
;
• rept-meas:type=mtcdth:enttype=link:lsn=xxx
tekelecstp 12-02-12 00:10:12 EST EAGLE5 44.0.0 TYPE OF REPORT: DAILY MAINTENANCE MEASUREMENTS ON LINK REPORT PERIOD: LAST REPORT INTERVAL: 12-02-11, 00:00:00 THROUGH 23:59:59
LINK-MTCD MEASUREMENTS FOR LINKSET mtp2:
LINK-MTCD MEASUREMENTS: LOC: 1104, LINK: A , LSN: mtp2 (MTP2)
261E86977 Revision 1, July 2017
ReportsMeasurements
These measurements are from 12-02-11, 00:00:00 through 23:59:59. MSGSTRAN = 0, MSGSRCVD = 0, MSURETRN = 0, OCTRETRN = 0, MOCTTRAN = 0, MOCTRCVD = 0, TDCNGLV1 = 0, TDCNGLV2 = 0, TDCNGLV3 = 0, ECCNGLV1 = 0, ECCNGLV2 = 0, ECCNGLV3 = 0, MSGDISC0 = 0, MSGDISC1 = 0, MSGDISC2 = 0, MSGDISC3 = 0, TLNKACTV = 0, LNKAVAIL = 0, ACHGOVRS = 0, NEARMGIH = 0, FARMGINH = 0, NMDCLFLR = 0, DRDCLFLR = 0, SURCVERR = 0, NEGACKS = 0, DRLKINHB = 0, NDCFLABN = 0, NDCFLXDA = 0, NDCFLXER = 0, NDCFLXDC = 0, NMFEPRO = 0, NMLCLPRO = 0, DRFEPRO = 0, DRLCLPRO = 0, MSURCERR = 0, DRBSYLNK = 0, PCRN1N2EXC = 0
;
tekelecstp 12-02-12 00:11:21 EST EAGLE5 44.0.0 TYPE OF REPORT: DAILY MAINTENANCE MEASUREMENTS ON LINK REPORT PERIOD: LAST REPORT INTERVAL: 12-02-11, 00:00:00 THROUGH 23:59:59
LINK-MTCD MEASUREMENTS FOR LINKSET ipsg:
LINK-MTCD MEASUREMENTS: LOC: 1103, LINK: A , LSN: ipsg (IPVL)
These measurements are from 12-02-11, 00:00:00 through 23:59:59. MSGSTRAN = 0, MSGSRCVD = 0, MSURETRN = 0, OCTRETRN = 0, MOCTTRAN = 0, MOCTRCVD = 0, TDCNGLV1 = 0, TDCNGLV2 = 0, TDCNGLV3 = 0, ECCNGLV1 = 0, ECCNGLV2 = 0, ECCNGLV3 = 0, MSGDISC0 = 0, MSGDISC1 = 0, MSGDISC2 = 0, MSGDISC3 = 0, TLNKACTV = 0, LNKAVAIL = 0, ACHGOVRS = 0, NEARMGIH = 0, FARMGINH = 0, NMDCLFLR = 0, DRDCLFLR = 0, SURCVERR = 0, NEGACKS = 0, DRLKINHB = 0, NDCFLABN = 0, NDCFLXDA = 0, NDCFLXER = 0, NDCFLXDC = 0, NMFEPRO = 0, NMLCLPRO = 0, DRFEPRO = 0, DRLCLPRO = 0, MSURCERR = 0, DRBSYLNK = 0, PCRN1N2EXC = 0
;
tekelecstp 12-02-12 00:11:55 EST EAGLE5 44.0.0 TYPE OF REPORT: DAILY MAINTENANCE MEASUREMENTS ON LINK REPORT PERIOD: LAST REPORT INTERVAL: 12-02-11, 00:00:00 THROUGH 23:59:59
LINK-MTCD MEASUREMENTS FOR LINKSET saal:
LINK-MTCD MEASUREMENTS: LOC: 1112, LINK: A , LSN: saal (SAAL)
These measurements are from 12-02-11, 00:00:00 through 23:59:59. MSGSTRAN = 0, MSGSRCVD = 0, MOCTTRAN = 0, MOCTRCVD = 0, TDCNGLV1 = 0, TDCNGLV2 = 0, TDCNGLV3 = 0, ECCNGLV1 = 0, ECCNGLV2 = 0, ECCNGLV3 = 0, MSGDISC0 = 0, MSGDISC1 = 0, MSGDISC2 = 0, MSGDISC3 = 0, TLNKACTV = 0, LNKAVAIL = 0, ACHGOVRS = 0, NMDCLFLR = 0, DRDCLFLR = 0, NMLCLPRO = 0, DRLCLPRO = 0, LMSUTRN = 0, LMSURCV = 0, LMSUOCTTRN = 0, LMSUOCTRCV = 0, LMSUTRNDSC = 0, LMSURCVDSC = 0
262E86977 Revision 1, July 2017
ReportsMeasurements
;
tekelecstp 12-02-12 00:12:30 EST EAGLE5 44.0.0 TYPE OF REPORT: DAILY MAINTENANCE MEASUREMENTS ON LINK REPORT PERIOD: LAST REPORT INTERVAL: 12-02-11, 00:00:00 THROUGH 23:59:59
LINK-MTCD MEASUREMENTS FOR LINKSET ssedcm1:
LINK-MTCD MEASUREMENTS: LOC: 1105, LINK: A , LSN: ssedcm1 (IPVHSL)
These measurements are from 12-02-11, 00:00:00 through 23:59:59. MSGSTRAN = 0, MSGSRCVD = 0, MOCTTRAN = 0, MOCTRCVD = 0, TDCNGLV1 = 0, TDCNGLV2 = 0, TDCNGLV3 = 0, ECCNGLV1 = 0, ECCNGLV2 = 0, ECCNGLV3 = 0, MSGDISC0 = 0, MSGDISC1 = 0, MSGDISC2 = 0, MSGDISC3 = 0, TLNKACTV = 0, LNKAVAIL = 0, ACHGOVRS = 0, NEARMGIH = 0, FARMGINH = 0, NMDCLFLR = 0, DRDCLFLR = 0, SURCVERR = 0, DRLKINHB = 0, NDCFLXDA = 0, NDCFLXER = 0, NDCFLXDC = 0, NMLCLPRO = 0, DRLCLPRO = 0, SDPDURTR = 0
;
tekelecstp 12-02-12 00:13:00 EST EAGLE5 44.0.0 TYPE OF REPORT: DAILY MAINTENANCE MEASUREMENTS ON LINK REPORT PERIOD: LAST REPORT INTERVAL: 12-02-11, 00:00:00 THROUGH 23:59:59
LINK-MTCD MEASUREMENTS FOR LINKSET hcmimt1:
LINK-MTCD MEASUREMENTS: LOC: 1203, LINK: A , LSN: hcmimt1 (MTP2-UNCH)
These measurements are from 12-02-11, 00:00:00 through 23:59:59. MSGSTRAN = 0, MSGSRCVD = 0, MOCTTRAN = 0, MOCTRCVD = 0, TDCNGLV1 = 0, TDCNGLV2 = 0, TDCNGLV3 = 0, ECCNGLV1 = 0, ECCNGLV2 = 0, ECCNGLV3 = 0, MSGDISC0 = 0, MSGDISC1 = 0, MSGDISC2 = 0, MSGDISC3 = 0, TLNKACTV = 0, LNKAVAIL = 0, ACHGOVRS = 0, NEARMGIH = 0, FARMGINH = 0, NMDCLFLR = 0, DRDCLFLR = 0, DRLKINHB = 0, NDCFLXDA = 0, NDCFLXDC = 0, NMFEPRO = 0, NMLCLPRO = 0, DRFEPRO = 0, DRLCLPRO = 0, DRBSYLNK = 0, LMSUTRN = 0, LMSURCV = 0, LMSUOCTTRN = 0, LMSUOCTRCV = 0, LMSUTRNDSC = 0, LMSURCVDSC = 0, M2PUDMTR = 0, M2PUDOCT = 0, M2PUDMRC = 0, M2PUDOCR = 0, M2PLKNIS = 0, ECLNKCB = 0, ECLNKXCO = 0
;
263E86977 Revision 1, July 2017
ReportsMeasurements
FTP Reports
Table 134: FTP MTCDTH LINK Command Headers
DescriptionFieldName
Linksetname
LSN
Cardlocation
LOC
Link portLINK
Link typeLNKTYPE
FTP Example Output File Name: mtcdth-link_20101004_2400.csv
FTP Example Output File Format:
"CLLI","SWREL","RPTDATE","RPTIME","TZ","RPTTYPE","RPTPD","IVALDATE","IVALSTART","IVALEND","NUMENTIDS"<cr><lf>"tekelecstp","EAGLE5 44.0.0-64.23.0","2012-02-12","00:14:53","EST ","DAILY MAINTENANCE MEASUREMENTS ON LINK","LAST","2012-02-11","00:00:00","24:00:00",5<cr><lf><cr><lf>"STATUS","LSN","LOC","LINK","LNKTYPE","MSGSTRAN","MSGSRCVD","MSURETRN","OCTRETRN","MOCTTRAN","MOCTRCVD","TDCNGLV1","TDCNGLV2","TDCNGLV3","ECCNGLV1","ECCNGLV2","ECCNGLV3","MSGDISC0","MSGDISC1","MSGDISC2","MSGDISC3","TLNKACTV","LNKAVAIL","ACHGOVRS","NEARMGIH","FARMGINH","NMDCLFLR","DRDCLFLR","SURCVERR","NEGACKS","DRLKINHB","NDCFLABN","NDCFLXDA","NDCFLXER","NDCFLXDC","NMFEPRO","NMLCLPRO","DRFEPRO","DRLCLPRO","MSURCERR","DRBSYLNK","PCRN1N2EXC","SDPDURTR","LMSUTRN","LMSURCV","LMSUOCTTRN","LMSUOCTRCV","LMSUTRNDSC","LMSURCVDSC","M2PUDMTR","M2PUDOCT","M2PUDMRC","M2PUDOCR","M2PLKNIS","ECLNKCB","ECLNKXCO"<cr><lf>"K","hcmimt1","1203","A ","MTP2-UNCH",0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0<cr><lf>"K","ipsg","1103","A ","IPVL",0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0<cr><lf>"K","mtp2","1104","A ","MTP2",0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0<cr><lf>"K","ssedcm1","1105","A ","IPVHSL",0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1281,0,0<cr><lf>"K","saal","1112","A ","SAAL",0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0<cr><lf>
Assuming each data line will be:
4 char status + 13 char LSN + 7 char LOC + 6 char LINK + 12 char LKNTYPE + 51*(6 char data) + 2 =350 chars
264E86977 Revision 1, July 2017
ReportsMeasurements
Table 135: Typical File Size: mtcdth-link.csv
File Size=Report data+Reportheader+System
header
175,855 bytes=175,000+605+250
LNKSET MTCDTH Report
Command Examples
• UI
rept-meas:type=mtcdth:enttype=lnkset:lsn=ayyyyyyy
• FTP
rept-ftp-meas:type=mtcdth:enttype=lnkset
Table 136: Maintenance Day-to-Hour Linkset Measurements
UnitDescriptionEvent Name
peg countThe total number of times that aGTT translation matched a
SCCPLOOP
Point Code in the STP’s loopsetentries resulting in either a notifyor discard of an SCCP message.
statusIndication of Data Validity:STATUS
K indicates good dataI indicates incompleteintervalN indicates data not current
peg countTranslation Type MappingTranslation Incoming - The total
ZTTMAPI
number of Translation TypeMapping translations performedon incoming Message SignalUnits (MSUs) for the specifiedlinkset.
peg countTranslation Type MappingTranslation Outgoing - The total
ZTTMAPO
number of Translation TypeMapping translations performedon outgoing Message SignalUnits (MSUs) for the specifiedlinkset.
265E86977 Revision 1, July 2017
ReportsMeasurements
Measurement Events
Table 137: Daily Maintenance (MTCD) and Day-to-Hour Maintenance (MTCDTH) LinksetMeasurements
UnitDescriptionEvent Name
peg countThe total number of times that aGTT translation matched a
SCCPLOOP
Point Code in the STP’s loopsetentries resulting in either a notifyor discard of an SCCP message.
statusIndication of Data Validity:STATUS
K indicates good dataI indicates incompleteintervalN indicates data not current
peg countTranslation Type MappingTranslation Performed - MSUs
ZTTMAPI
Received on the Gateway Linkset- The total number of TranslationType Mapping translationsperformed for incoming MessageSignal Units (MSUs) received onthe specified linkset.
peg countTranslation Type MappingTranslation Performed - MSUs
ZTTMAPO
Transmitted on the GatewayLinkset - The total number oftranslations performed onoutgoing Message Signal Units(MSUs) for the specified linkset.
UI Reports
UI Example Output:
• Example of rept-meas:type=mtcdth:enttype=lnkset:lsn=xxx
tekelecstp 12-02-12 00:07:51 EST EAGLE5 44.0.0 TYPE OF REPORT: DAILY MAINTENANCE MEASUREMENTS ON LNKSET REPORT PERIOD: LAST REPORT INTERVAL: 12-02-11 00:00:00 THRU 23:59:59
LNKSET-MTCD MEASUREMENTS: mtp2 (MTP2)
ZTTMAPO = 0, ZTTMAPI = 0, SCCPLOOP = 0
;
tekelecstp 12-02-12 00:07:52 EST EAGLE5 44.0.0-64.23.0
266E86977 Revision 1, July 2017
ReportsMeasurements
LNKSET-MTCD MEASUREMENTS: ipsg (IPVL)
ZTTMAPO = 0, ZTTMAPI = 0, SCCPLOOP = 0
;
tekelecstp 12-02-12 00:07:53 EST EAGLE5 44.0.0 LNKSET-MTCD MEASUREMENTS: ssedcm1 (IPVHSL)
ZTTMAPO = 0, ZTTMAPI = 0, SCCPLOOP = 0
;
tekelecstp 12-02-12 00:07:54 EST EAGLE5 44.0.0 LNKSET-MTCD MEASUREMENTS: saal (SAAL)
ZTTMAPO = 0, ZTTMAPI = 0, SCCPLOOP = 0
;
tekelecstp 12-02-12 00:07:55 EST EAGLE5 44.0.0 LNKSET-MTCD MEASUREMENTS: hcmimt1 (MTP2-UNCH)
ZTTMAPO = 0, ZTTMAPI = 0, SCCPLOOP = 0
;
FTP Reports
FTP Example Output File Name: mtcdth-lnkset_20101005_0100.csv
FTP Example Output File Format:
"CLLI","SWREL","RPTDATE","RPTIME","TZ","RPTTYPE","RPTPD","IVALDATE","IVALSTART","IVALEND","NUMENTIDS"<cr><lf>"tekelecstp","EAGLE5 44.0.0-64.23.0","2012-02-12","01:02:37","EST ","DAY-TO-HOUR MAINTENANCE MEASUREMENTS ON LNKSET","LAST","2012-02-12","00:00:00","01:00:00",5<cr><lf><cr><lf>"STATUS","LSN","LNKTYPE","ZTTMAPO","ZTTMAPI","SCCPLOOP"<cr><lf>"K","mtp2","MTP2",0,0,0<cr><lf>"K","ipsg","IPVL",0,0,0<cr><lf>"K","ssedcm1","IPVHSL",0,0,0<cr><lf>"K","saal","SAAL",0,0,0<cr><lf>"K","hcmimt1","MTP2-UNCH",0,0,0<cr><lf>
Assuming each data line will be:
4 char status + 13 char LSN + 12 char LKNTYPE + 3*(6 char data) + 2 = 49 chars
For a report of 500 linksets, the typical file size is:
Table 138: Typical File Size: mtcdth-lnkset.csv
File Size=Report data+Reportheader+System
header
24,808 bytes=24,500+58+250
267E86977 Revision 1, July 2017
ReportsMeasurements
STPLAN MTCDTH Report
Note: The peg counts forSTPLAN measurements have the possibility of rolling over during periodsof highSTPLAN message transmit and receive. On the measurement reports these measurements showup as negative numbers. This indicatesSTPLAN transmit and receive measurements have valuesgreater than four gigabytes of data.
Example Commands:
UI: rept-meas:type=mtcdth:enttype=stplanFTP: rept-ftp-meas:type=mtcdth:enttype=stplan
Table 139: Daily Maintenance (MTCD) and Day-to-Hour Maintenance (MTCDTH) STPLANMeasurements
UnitDescriptionEvent Name
peg countEthernet Alignment Error -Number of packets not received
ENETALNERR
over the STPLAN interfacebecause of ethernet alignmenterrors.
peg countEthernet Bus Busy - Number oftransmissions attempted when
ENETBUSBSY
the STPLAN ethernet bus wasbusy.
peg countEthernetCRC Error - Number ofpackets not received on the
ENETCRCERR
STPLAN ethernet due to CRCerrors.
peg countEthernet Collision Error -Number of packets not
ENETCOLERR
transmitted by STPLAN becauseof excessive collisions on theSTPLAN ethernet bus.
peg countEthernet Octets Received - Thetotal number of octets received
ENETOCTRCV
on the STPLAN ethernetinterface.
peg countEthernet Octets Transmitted -The total number of octets
ENETOCTXMT
transmitted on the STPLANethernet interface.
peg countEthernet Receive BufferOverflow Errors -
ENETOVRERR
268E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
Number of packets not receivedby STPLAN because of a receivebuffer overflow.
peg countIP Address Error- The totalnumber of inbound IP
IPADDRERR
datagrams discarded on theSTPLAN interface due to a baddestination address.
peg countIP Header Errors - The totalnumber of inbound IP
IPHDRERR
datagrams discarded on theSTPLAN interface due to headererrors.
peg countIP Protocol Error - Number ofinbound IP datagrams discarded
IPPROTERR
by STPLAN due to an error inthe packet (invalid protocol).
peg countSTPLAN Discarded 1 - Numberof SLAN MSUs discarded by the
SLANDISC1
LIM cards for STPLAN featuredisabled and records aging offof the local queue.
peg countSTPLAN Discarded 2 - Numberof SLAN MSUs discarded by the
SLANDISC2
SLAN cards for networkproblems and unreachable farend servers. During networkoutages, the SLAN cards willstop TVG/MFC grants or go intoflow control. This causes thePDUs to be queued on the LIMcards, so the majority of discardswill be pegged on SLANDISC1under these circumstances.
msecsSTPLAN Disabled - Theduration that the STPLAN
SLANDSBLD
screening/copy feature wasdisabled.
peg countSTPLAN Screened - Number ofMSUs that were copied to the
SLANSCRND
STPLAN interface after passinggateway screening.
269E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
peg countSTPLAN Transmit - Number ofMSUs sent to the hostdestination.
SLANXMIT
statusIndication of Data Validity:STATUS
K indicates good dataI indicates incompleteintervalN indicates data not current
peg countTCP Connections Failed - Thetotal number of TCP connections
TCPCONNFLD
that have failed on the STPLANinterface.
peg countTCP Receive Error - The totalnumber of TCP segments
TCPRCVERR
received on the STPLANinterface in error.
peg countTCP Reset Sent - The totalnumber of TCP segments sent
TCPRSTSENT
containing the reset (RST) flagon the STPLAN interface.
peg countTCP Segment Received - Thetotal number of TCP segments
TCPSEGRCVD
received on the STPLANinterface.
peg countTCP Segment Sent - The totalnumber of TCP segments senton the STPLAN interface.
TCPSEGSENT
peg countTCP Segment Retransmitted -The total number of TCP
TCPSEGXMT2
segments retransmitted on theSTPLAN interface.
UI Reports
UI Example Output:
tekelecstp 01-08-18 00:00:21 EST EAGLE 34.0.0 TYPE OF REPORT: DAY-TO-HOUR MAINTENANCE MEASUREMENTS ON STPLAN REPORT PERIOD: LAST REPORT INTERVAL: 01-08-17 00:00:00 THRU 23:59:59 STPLAN-MTCD MEASUREMENTS SLANDSBLD = 0, SLANDISC1 = 0, SLANDISC2 = 0, SLANSCRND = 0, SLANXMIT = 0, ENETALNERR = 0,
270E86977 Revision 1, July 2017
ReportsMeasurements
ENETCRCERR = 0, ENETCOLERR = 0, ENETBUSBSY = 0, ENETOVRERR = 0, ENETOCTXMT = 0, ENETOCTRCV = 0, TCPCONNFLD = 0, TCPSEGRCVD = 0, TCPSEGSENT = 0, TCPSEGXMT2 = 0, TCPRCVERR = 0, TCPRSTSENT = 0, IPHDRERR = 0, IPADDRERR = 0, IPPROTERR = 0; tekelecstp 01-08-18 00:00:22 EST EAGLE 34.0.0 END OF ON-DEMAND STPLAN-MTCDTH MEASUREMENT REPORT;
FTP ReportsFTP Example Output File Name: mtcdth-stplan_19990117_1500.csv
FTP Example Output File Format:
"CLLI","SWREL","RPTDATE","RPTIME","TZ","RPTTYPE","RPTPD","IVALDATE","IVALSTART","IVALEND","NUMENTIDS"<cr><lf>"tekelecstp","34.0.0-39.1.0","1999-01-17","15:51:37","EST","DAY-TO-HOUR MAINTENANCE MEASUREMENTS ON STPLAN","LAST","1999-01-17","00:00:00","15:00:00",1<cr><lf><cr><lf>"STATUS","SLANDSBLD","SLANDISC1","SLANDISC2","SLANSCRND","SLANXMIT","ENETALNERR","ENETCRCERR","ENETCOLERR","ENETBUSBSY","ENETOVRERR","ENETOCTXMT","ENETOCTRCV","TCPCONNFLD","TCPSEGRCVD","TCPSEGSENT","TCPSEGXMT2","TCPRCVERR","TCPRSTSENT","IPHDRERR","IPADDRERR","IPPROTERR"<cr><lf>"K",0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0<cr><lf>
Typical file size is:
Table 140: Typical File Size: mtcdth-stplan.csv
File Size=Report data+Reportheader+System
header
792 bytes=260+282+250
SCTPASOC MTCDTH Report
Command Examples
• UI: rept-meas:type=mtcdth:enttype=sctpasoc:aname=assoc1
• FTP: rept-ftp-meas:type=mtcdth:enttype=sctpasoc
Measurement Events
Table 141: Daily Maintenance (MTCD) and Day-to-Hour (MTCDTH) SCTPASOC Measurements lists theSCTPASOC events and their descriptions.
271E86977 Revision 1, July 2017
ReportsMeasurements
Table 141: Daily Maintenance (MTCD) and Day-to-Hour (MTCDTH) SCTPASOC Measurements
UnitDescriptionEvent Name
peg countSCTP Association ActiveEstablishments - The number of
ACTVESTB
times that SCTP associationshave made a direct transition tothe ESTABLISHED state fromthe COOKIEECHOED state(COOKIE-ECHOED -->ESTABLISHED). In this case theupper layer (i.e., the local M2PA)was the initiator of theassociation establishmentbetween the SCTP peers.
msecSCTP Association MaximumObserved Retransmission
ASMAXRTO
Timeout - The maximumobserved value of the SCTP statevariable Retransmission Timeout(RTO) in milliseconds (ms) forSCTP packets transmitted (butnot retransmitted) to the remotepeer endpoint’s destinationtransport address during themeasurement interval.
peg countSCTP Aborted Associations -The number of times that SCTP
ASOCABTD
associations have made a directtransition to the CLOSED statefrom any state using theprimitive “Abort” (AnyState--Abort--> CLOSED), conveyingan ungraceful termination of theassociation.
peg countSCTP Association Shutdowns- The number of times that SCTP
ASOCSHTD
associations have made a directtransition to the CLOSED statefrom either theSHUTDOWN-SENT state or theSHUTDOWN-ACK-SENT state,conveying graceful terminationof the association.
peg countSCTP Control Chunks Received- The number of SCTP control
CNTLCHKR
272E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
chunks received from the remotepeer (excluding duplicates).
peg countSCTP Control Chunks Sent -The number of SCTP control
CNTLCHKS
chunks sent to the remote peer(excluding retransmissions) afteran association has been formed.
CNTLCHKR register excludesinitial SCTP association set-upmessages (INIT andCOOKIE-ECHO).
peg countNumber of SCTP DATA chunksreceived from the remote SCTP
DATCHKRC
peer (excluding duplicates anddiscards).
peg countNumber of SCTP DATA chunkssent to the remote SCTP peer(excluding retransmissions).
DATCHKSN
peg countDuration the association was notin the Established state.
DURASNEST
peg countNumber of times the associationtransitioned out of theEstablished state.
ECASNEST
peg countSCTP Gap AcknowledgementsReceived - The number of Gap
GAPACKSR
Acknowledgement blocks inSelective Acknowledgement(SACK) control chunks receivedfrom the remote SCTP peer,indicating gaps in the peer’sreceived subsequences of DATAchunks as represented by theirTransport Sequence Numbers(TSNs) (The inclusion of thismeasurement is intended toallow network personnel toassess the message-deliveryperformance of the IPVHSLrelative to gap acknowledgmentlimits, if used as performancecriteria for link proving andin-service monitoring).
273E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
peg countSCTP Ordered Data ChunksReceived - The number of SCTP
ORDCHKRC
ordered data chunks receivedfrom the remote peer (excludingduplicates).
peg countSCTP Ordered Data ChunksSent - The number of SCTP
ORDCHKSN
ordered data chunks sent to theremote peer (excludingretransmissions).
peg countSCTP Association PassiveEstablishments - The number of
PASVESTB
times that SCTP associationshave made a direct transition tothe ESTABLISHED state fromthe CLOSED state (CLOSED -->ESTABLISHED), indicating thatthe remote peers initiatedassociation establishment.
peg countSCTP Association PeerEndpoint Failures - The number
PEERFAIL
of peer endpoint failuredetection events for theassociation as triggered by thecrossing of threshold Assoc.Max. Retrans.
peg countSCTP AssociationRetransmitted Chunks - The
RTXCHNKS
number of SCTP data chunksretransmitted to the remoteSCTP peer. When T3-rtx expires,the DATA chunks that triggeredthe T3 timer will be re-sentaccording with theretransmissions rules. EveryDATA chunk that was includedin the SCTP packet that triggeredthe T3-rtx timer must be addedto the value of this counter.
octetsSCTP Packet Octets Received -The number of octets comprising
SCOCTRCV
valid SCTP packets receivedfrom the remote peer after anassociation has been formed.
274E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
octetsSCTP Packet Octets Sent - Thetotal number of octets
SCOCTSNT
comprising SCTP packetssubmitted to the IP layer fortransmittal to the remote peer fora specific association.
peg countSCTP Packets Received - Thetotal number of SCTP packets
SCPKTRCV
received from the remote peerthat had a valid checksum.Duplicates are included.
SCPKTRCV register excludes thepegging of SCTP Packetsreceived when no instance existson the card for any of the links,i.e., the association parameter"OPEN" has value "NO" for allthe links configured on the card.Also, excludes pegging of set upmessages (INIT andCOOKIE-ECHO) that are part ofassociation establishmentprocedure.
peg countSCTP Packets Sent - The totalnumber of SCTP packets sent to
SCPKTSNT
the remote peer, i.e., submittedby the local SCTP instance to theIP layer for transmission.Retransmissions are included.
SCPKTSNT register excludesinitial SCTP association set-upmessages (INIT-ACK andCOOKIE-ACK) and ABORTmessages. For M2PA associationINIT packet is never pegged.
statusIndication of Data Validity:STATUS
K indicates good dataI indicates incompleteintervalN indicates data not current
275E86977 Revision 1, July 2017
ReportsMeasurements
UI Reports
UI Example Output:
stdcfg2b 07-12-31 06:07:04 EST UNKNOWN 38.0.0-XX.XX.0 TYPE OF REPORT: DAY-TO-HOUR MAINTENANCE MEASUREMENTS ON SCTPASOC REPORT PERIOD: LAST REPORT INTERVAL: 07-12-31 00:00:00 THRU 05:59:59
SCTPASOC-MTCDTH MEASUREMENTS: ASSOC: assoc1
These measurements are from 07-12-31, 00:00:00 through 05:59:59. ECASNEST = 0, DURASNEST = 0, DATCHKSN = 0, RTXCHNKS = 0, DATCHKRC = 0, SCPKTSNT = 20, SCPKTRCV = 20, SCOCTSNT = 0, SCOCTRCV = 0, CNTLCHKS = 400, ORDCHKSN = 400, CNTLCHKR = 0, ORDCHKRC = 0, GAPACKSR = 0, ACTVESTB = 0, PASVESTB = 0, ASOCABTD = 0, ASOCSHTD = 0, PEERFAIL = 0, ASMAXRTO = 0
;
FTP Reports
FTP Example Output File Name: mtcdth-sctpasoc_20071115_0200.csv
FTP Example Output File Format:
"CLLI","SWREL","RPTDATE","RPTIME","TZ","RPTTYPE","RPTPD","IVALDATE","IVALSTART","IVALEND","NUMENTIDS"<cr><lf>"ipmeas","UNKNOWN ??.?.?-58.21.0","2007-08-18","00:00:18","****","DAY-TO-HOUR MAINTENANCE MEASUREMENTS ON SCTPASOC","LAST","2007-08-17","00:00:00","02:00:00",3<cr><lf>"STATUS","ASSOC","ECASNEST","DURASNEST","DATCHKSN","RTXCHNKS","DATCHKRC","SCPKTSNT","SCPKTRCV","SCOCTSNT","SCOCTRCV","CNTLCHKS","ORDCHKSN","CNTLCHKR","ORDCHKRC","GAPACKSR","ACTVESTB","PASVESTB","ASOCABTD","ASOCSHTD","PEERFAIL","ASMAXRTO"<cr><lf>
"K","A1101",0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0<cr><lf>"K","A1102",0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0<cr><lf>"K","A1103",0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0<cr><lf>
Assuming each data line will be:
4 char status + 18 char association + 16*(6 char data) + 2 = 144 chars
For a report of 1000 associations, typical file size is:
Table 142: Typical File Size: mtcdth-sctpasoc.csv
File Size=Report data+Reportheader+System
header
144445 bytes=144000+195+250
276E86977 Revision 1, July 2017
ReportsMeasurements
SCTPCARD MTCDTH Report
Command Examples
• UI: rept-meas:type=mtcdth:enttype=sctpcard:loc=1202
• FTP: rept-ftp-meas:type=mtcdth:enttype=sctpcard
Measurement Events
Table 143: Daily Maintenance (MTCD) and Day-to-Hour Maintenance (MTCDTH) SCTPCARD Measurementslists the SCTPCARD events and their descriptions.
Table 143: Daily Maintenance (MTCD) and Day-to-Hour Maintenance (MTCDTH) SCTPCARDMeasurements
UnitDescriptionEvent Name
peg countSCTP Association ActiveEstablishments - The number of
ACTVESTB
times that SCTP associationshave made a direct transition tothe ESTABLISHED state fromthe COOKIEECHOED state(COOKIE-ECHOED -->ESTABLISHED). In this case theupper layer (i.e., the local M2PA)was the initiator of theassociation establishmentbetween the SCTP peers.
peg countSCTP Aborted Associations -The number of times that SCTP
ASOCABTD
associations have made a directtransition to the CLOSED statefrom any state using theprimitive “Abort” (AnyState--Abort--> CLOSED), conveyingan ungraceful termination of theassociation.
peg countSCTP Association Shutdowns- The number of times that SCTP
ASOCSHTD
associations have made a directtransition to the CLOSED statefrom either theSHUTDOWN-SENT state or theSHUTDOWN-ACK-SENT state,conveying graceful terminationof the association.
277E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
peg countSCTP Control Chunks Received- The number of SCTP control
CNTLCHKR
chunks received from the remotepeer (excluding duplicates).
peg countSCTP Control Chunks Sent -The number of SCTP control
CNTLCHKS
chunks sent to the remote peer(excluding retransmissions),including chunks for which anassociation has not yet beenformed.
peg countNumber of SCTP DATA chunksreceived from the remote SCTP
DATCHKRC
peer (excluding duplicates anddiscards).
peg countNumber of SCTP DATA chunkssent to the remote SCTP peer(excluding retransmissions).
DATCHKSN
peg countSCTP Ordered Data ChunksReceived - The number of SCTP
ORDCHKRC
ordered data chunks receivedfrom the remote peer (excludingduplicates).
peg countSCTP Ordered Data ChunksSent - The number of SCTP
ORDCHKSN
ordered data chunks sent to theremote peer (excludingretransmissions).
peg countSCTP Association PassiveEstablishments - The number of
PASVESTB
times that SCTP associationshave made a direct transition tothe ESTABLISHED state fromthe CLOSED state (CLOSED -->ESTABLISHED), indicating thatthe remote peers initiatedassociation establishment.
peg countSCTP AssociationRetransmitted Chunks - The
RTXCHNKS
number of SCTP data chunksretransmitted to the remoteSCTP peer. When T3-rtx expires,the DATA chunks that triggered
278E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
the T3 timer will be re-sentaccording with theretransmissions rules. EveryDATA chunk that was includedin the SCTP packet that triggeredthe T3-rtx timer must be addedto the value of this counter.
octetsSCTP Packet Octets Received -The number of octets comprising
SCOCTRCV
valid SCTP packets receivedfrom the remote peer, includingpackets for which an associationhas not yet been formed.
octetsSCTP Packet Octets Sent - Thetotal number of octets
SCOCTSNT
comprising SCTP packetssubmitted to the IP layer fortransmittal to the remote peer,including packets for which anassociation has not been formed.
peg countSCTP Packets Received - Thetotal number of SCTP packets
SCPKTRCV
received from the remote peerthat had a valid checksum.Duplicates are included.
SCPKTRCV register excludes thepegging of SCTP Packetsreceived when no instance existson the card for any of theassociations, i.e., the associationparameter "OPEN" has value"NO" for all the associationsconfigured on the card. Also,excludes pegging of set upmessages (INIT andCOOKIE-ECHO) that are part ofassociation establishmentprocedure.
peg countSCTP Packets Received WithChecksum Error - The number
SCPKTRER
of SCTP packets received fromremote peers with an invalidchecksum
peg countSCTP Packets Sent - The totalnumber of SCTP packets sent to
SCPKTSNT
279E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
the remote peer, i.e., submittedby the local SCTP instance to theIP layer for transmission.Retransmissions are included.
SCPKTSNT register excludesinitial SCTP association set-upmessages (INIT-ACK andCOOKIE-ACK). For M2PAassociation INIT packet is neverpegged.
statusIndication of Data Validity:STATUS
K indicates good dataI indicates incompleteintervalN indicates data not current
peg countUnassociated (Out-of-the-Blue)SCTP Packets - The number of
UNASCTPK
“out-of-the-blue” SCTP packetsreceived by the host, i.e., SCTPpackets correctly formed withthe correct checksum value, butfor which the receiver (localSCTP) was not able to identifythe association to which thepacket belongs.
UNASCTPK register includesthe pegging of SCTP Packetsreceived when no instance existson the card for any of theassociations, i.e., the associationparameter "OPEN" has value"NO" for all the associationsconfigured on the card (SeeSCPKTRCV register).
UI Reports
UI Example Output:
stdcfg2b 07-12-31 EST UNKNOWN 38.0.0-XX.XX.0 TYPE OF REPORT: DAY-TO-HOUR MAINTENANCE MEASUREMENTS ON SCTPCARD REPORT PERIOD: LAST REPORT INTERVAL: 07-12-31 00:00:00 THRU 03:59:59
SCTPCARD-MTCDTH MEASUREMENTS: LOC: 1201
These measurements are from 07-12-31, 00:00:00 through 03:59:59.
280E86977 Revision 1, July 2017
ReportsMeasurements
DATCHKSN = 0, RTXCHNKS = 0, DATCHKRC = 0, SCPKTSNT = 20, SCPKTRCV = 20, SCPKTRER = 0, UNASCTPK = 0, SCOCTSNT = 0, SCOCTRCV = 0, CNTLCHKS = 400, ORDCHKSN = 400, CNTLCHKR = 0, ORDCHKRC = 0, ACTVESTB = 0, PASVESTB = 0, ASOCABTD = 0, ASOCSHTD = 0
;
FTP Reports
FTP Example Output File Name: mtcdth-sctpcard_20071115_0400.csv
FTP Example Output File Format:
"CLLI","SWREL","RPTDATE","RPTIME","TZ","RPTTYPE","RPTPD","IVALDATE","IVALSTART","IVALEND","NUMENTIDS"<cr><lf>"tekelecstp",”38.0.0-XX.XX.0”,”2007-12-31”,"12:12:10","EST","DAY-TO-HOUR MAINTENANCE MEASUREMENTS ON SCTPCARD","LAST",”2007-12-30”,"00:00:00","04:00:00",3<cr><lf><cr><lf>"STATUS","LOC","DATCHKSN","RTXCHNKS","DATCHKRC","SCPKTSNT","SCPKTRCV","SCPKTRER","UNASCTPK","SCOCTSNT","SCOCTRCV","CNTLCHKS","ORDCHKSN","CNTLCHKR","ORDCHKRC","ACTVESTB","PASVESTB","ASOCABTD","ASOCSHTD"<cr><lf>"K","1101",0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0<cr><lf>"K","1102",0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0<cr><lf>"K","1103",0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0<cr><lf>
Assuming each data line will be:
4 char status + 7 char location + 15*(6 char data) + 2 = 103 chars
For a report of 80 cards, typical file size is:
Table 144: Typical File Size: mtcdth-sctpasoc.csv
File Size=Report data+Reportheader+System
header
8675 bytes=8240+185+250
UA MTCDTH Report
Command Examples
• UI: rept-meas:type=mtcdth:enttype=ua:aname=assoc1:asname=appsrvr1
• FTP: rept-ftp-meas:type=mtcdth:enttype=ua
Measurement Events
Table 145: Daily Maintenance (MTCD) and Day-to-Hour Maintenance (MTCDTH) UA Measurements liststhe UA events and their descriptions.
281E86977 Revision 1, July 2017
ReportsMeasurements
Table 145: Daily Maintenance (MTCD) and Day-to-Hour Maintenance (MTCDTH) UA Measurements
UnitDescriptionEvent Name
peg countFor M3UA, this registerrepresents the number of DATA
RXDATAMS
messages received from theASP.
For SUA, this register representsthe total of CLDT and CLDRmessages received from theASP.
octetsFor M3UA, this registerrepresents the number of DATAoctets received from the ASP.
RXDATAOC
For SUA, this register representsthe total of CLDT and CLDRoctets received from the ASP.
peg countNumber of messages receivedwith multiple routing contexts
RXMLRCMS
(always pegged against thedefault AS).
statusIndication of Data Validity:STATUS
K indicates good dataI indicates incompleteintervalN indicates data not current
peg countFor M3UA, this registerrepresents the number of DATAmessages sent to the ASP.
TXDATAMS
For SUA, this register representsthe total of CLDT and CLDRmessages sent to the ASP.
octetsFor M3UA, this registerrepresents the number of DATAoctets sent to the ASP.
TXDATAOC
For SUA, this register representsthe total of CLDT and CLDRoctets sent to the ASP.
peg countTotal ASPM messages receivedfrom the ASP (including ASPSMand ASPTM messages).
UAASPMRX
282E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
peg countTotal ASPM messages sent tothe ASP (including ASPSM andASPTM messages).
UAASPMTX
peg countThe number of times the ASPtransitioned out of theASP-Active state.
UAASPNAC
secondsThe duration that the ASP wasnot in the ASP-Active state.
UAASPNAT
peg countThe number of times anAS-ASSOC experienced
UACNGCNT
congestion (this may include theAS entering congestion as aresult of the ASSOC enteringcongestion).
secondsThe duration that an AS-ASSOCexperienced congestion (this
UACNGTIM
may include the AS enteringcongestion as a result of theASSOC entering congestion).
peg countTotal MGMT messages receivedfrom the ASP.
UAMGMTRX
peg countTotal MGMT messages sent tothe ASP.
UAMGMTTX
peg countTotal Network Managementoctets received from the ASP -
UANMOCTR
The total number of non-DATAUA octets received from the ASP(i.e., sum of the ASPM, ASPTM,SSNM, MGMT, and RKM).
peg countTotal Network Managementoctets sent to the ASP - The total
UANMOCTT
number of non-DATA UA octetssent to the ASP (i.e., sum of theASPM, ASPTM, SSNM, MGMT,and RKM).
peg countTotal Network Managementmessages received from the
UANMMSGR
ASP - The total number ofnon-DATA UA messagesreceived from the ASP (i.e., sum
283E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
of the ASPM, ASPTM, SSNM,MGMT, and RKM).
peg countTotal Network Managementmessages sent to the ASP - The
UANMMSGT
total number of non-DATA UAmessages sent to the ASP (i.e.,sum of the ASPM, ASPTM,SSNM, MGMT, and RKM).
peg countTotal SSNM messages receivedfrom the ASP.
UASSNMRX
peg countTotal SSNM messages sent to theASP.
UASSNMTX
UI Reports
UI Example Output:
stdcfg2b 07-12-31 06:07:04 EST UNKNOWN 38.0.0-XX.XX.0 UA-MTCD MEASUREMENTS: AS: appsrvr1 ASSOC: assoc1
These measurements are from 07-12-31, 00:00:00 through 23:59:59. RXDATAMS = 100, RXDATAOC = 4000, TXDATAMS = 200, TXDATAOC = 8000, UANMMSGT = 0, UANMOCTT = 0, UANMMSGR = 0, UANMOCTR = 0, UAASPMTX = 0, UAASPMRX = 0, UASSNMTX = 0, UASSNMRX = 0, UAMGMTTX = 0, UAMGMTRX = 0, UACNGCNT = 0, UACNGTIM = 0, UAASPNAC = 0, UAASPNAT = 0, RXMLRCMS = 0
;
FTP Reports
FTP Example Output File Name: mtcdth-ua_20071115_1200.csv
FTP Example Output File Format:
"CLLI","SWREL","RPTDATE","RPTIME","TZ","RPTTYPE","RPTPD","IVALDATE","IVALSTART","IVALEND","NUMENTIDS"<cr><lf>"tekelecstp","37.5.0-58.25.0","2007-11-15","12:59:10","EST","DAY-TO-HOUR MAINTENANCE MEASUREMENTS ON UA","LAST","2007-11-15","00:00:00","12:00:00",3<cr><lf><cr><lf>"STATUS","AS","ASSOC","RXDATAMS","TXDATAMS","RXDATAOC","TXDATAOC","RXMLRCMS","UAASPMRX","UAASPNAC","UAASPNAT","UACNGCNT","UACNGTIM","UAMGMTRX","UAMGMTTX","UANMOCTR","UANMOCTT","UANMMSGR","UANMMSGT","UASSNMRX","UASSNMTX","RXMLRCMS"<cr><lf>"K","as1101","a1101",0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0<cr><lf>"K","as1102","a1102",0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0<cr><lf>"K","as1103","a1103",0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0<cr><lf>
284E86977 Revision 1, July 2017
ReportsMeasurements
Assuming each data line will be:
4 char status + 15 char AS + 15 char ASSOC + 19*(6 char data) + 2 = 150 chars
For a report of 1000 Application Servers, typical file size is:
Table 146: Typical File Size: mtcdth-ua.csv
File Size=Report data+Reportheader+System
header
150530 bytes=150000+280+250
Hourly Maintenance Measurements (MTCH)
The Maintenance Hour (MTCH) report provides the value of various maintenance measurementsaccumulated during a specific hour.
Entity Types: LNP, NP, EIR, MAPSCRN, VFLEX, ATINPQ, AIQ, GTTAPATH, DEIR, ENUM
Accumulation Interval: 60 minutes
STP Retention Period: 24 hours
Reporting Modes: On-demand, Scheduled (FTP reports only)
Accessible Collection Periods: Last, Specific
LNP MTCH Report
The enttype=lnp entity generates four separate reports per period. FTP reports are generated as CSVfiles and FTP'd to the customer FTP server. The command example will generate the following hourlyreports:
• Hourly LNP System Wide Measurements
• Hourly LNP Measurements Per SSP
• Hourly LNP Measurements Per LRN
• Hourly LNP Measurements Per NPA
For LNP_SYS and LNP_SSP reports, reports status relies on all SCCP cards regardless of the databasetype (i.e., RTDB/EPAP or RIDB/ELAP) in the system.
For LRN and LNP_NPA_NXX reports, ELAP SM cards are considered, which is the total number ofSCCP cards that are IS-NR connected to an ELAP database.
If any of the above cards are ISOLATED/OOS during a measurement interval, the respective reportis marked I. The report is marked K only when all the cards under consideration are IS_NR throughoutthe measurement interval.
Example Commands:
FTP:rept-ftp-meas:type=mtch:enttype=lnp:period=last
285E86977 Revision 1, July 2017
ReportsMeasurements
Table 147: Daily Maintenance (MTCD) and Hourly Maintenance (MTCH) LNP System WideMeasurements
UnitDescriptionEvent Name
peg countTrigger BasedLNPQRCV
The total number of queriesreceived by LNPQS.
peg countTriggerless
Number of encapsulated IAMmessages received by LNPQS
peg countTrigger BasedLNPQDSC
The number of invalid queriesthat are discarded because noreply can be generated.
not applicableTriggerless
All invalid IAM messages arerouted without LNP;LNPQTCPE is pegged.
peg countTrigger BasedLNPQTCPE
The number of error replies withTCAP error codes.
peg countTriggerless
The number of invalidencapsulated IAM messagesreceived by LNPQS. Note thatthese messages are routed totheir destinations with no LNPlookup.
peg countTrigger BasedLNPSREP
The number of successful replies.
peg countTriggerless
The number of successful IAMmessages.
peg countTrigger BasedLNPQUNPA
The number of correct queriesreceived for non-ported DNwhen NPA-NXX is notprovisioned.
286E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
peg countTriggerless
The number of correctencapsulated IAM messagesreceived for a non-ported DN,when the NPA-NXX is notprovisioned.
statusIndication of Data Validity:STATUS
K indicates good dataI indicates incompleteintervalN indicates data not current
Table 148: Daily Maintenance (MTCD) and Hourly Maintenance (MTCH) LNP Per SSPMeasurements
UnitDescriptionEvent Name
peg countTrigger BasedSSPQRCV
Number of correct queriesreceived per originating SSP.
peg countTriggerless
The number of correctencapsulated IAM messagesreceived by LNPQS per OPC.
peg countNumber of valid CLASS GTTreceived per originating SSP.
CLASSGTRQ
peg countNumber of valid LIDB GTTreceived per originating SSP.
LIDBGTRQ
peg countNumber of correct queriesreceived for ported TNs, peroriginating SSP.
SSPQRCVP
peg countNumber of correct queriesreceived for non-ported TNs, peroriginating SSP.
SSPQRCVNP
peg countNumber of CLASS Global TitleTranslation received for portedTNs, per originating SSP.
CLASSGTRQP
peg countNumber of CLASS Global TitleTranslation received for
CLASSGTRQNP
287E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
non-ported TNs, per originatingSSP.
peg countNumber of LIDB Global TitleTranslation received for portedTNs, per originating SSP.
LIDBGTRQP
peg countNumber of LIDB Global TitleTranslation received for
LIDBGTRQNP
non-ported TNs, per originatingSSP.
peg countNumber of CNAM Global TitleTranslation received for portedTNs, per originating SSP.
CNAMGTRQP
peg countNumber of CNAM Global TitleTranslation received for
CNAMGTRQNP
non-ported TNs, per originatingSSP.
peg countNumber of ISVM Global TitleTranslation received for portedTNs, per originating SSP.
ISVMGTRQP
peg countNumber of ISVM Global TitleTranslation received for
ISVMGTRQNP
non-ported TNs, per originatingSSP.
peg countNumber of WSMSC Global TitleTranslations received for portedTNs, per originating SSP
WSMSCGTRQP
peg countNumber of WSMSC Global TitleTranslations received for
WSMSCGTRQNP
non-ported TNs, per originatingSSP
statusIndication of Data Validity:STATUS
K indicates good dataI indicates incompleteintervalN indicates data not current
textThe TYPE of the point code.Valid values are ANSI, ITUI,ITUN, and ITUN24.
PC TYPE
The following equations apply:
288E86977 Revision 1, July 2017
ReportsMeasurements
SSPQRCV = SSPQRCVP + SSPQRCVNP
CLASSGTRQ = CLASSGTRQP + CLASSGTRQNP
LIDBGTRQ = LIDBGTRQP + LIDBGTRQNP
Table 149: Daily Maintenance (MTCD) and Hourly Maintenance (MTCH) LNP LRN Measurements
UnitDescriptionEvent Name
peg countTrigger BasedLRNQRCV
The number of correct queriesreceived per LRN.
peg countTriggerless
The number of correctencapsulated IAM messagesreceived per LRN.
statusIndication of Data Validity:STATUS
K indicates good dataI indicates incompleteintervalN indicates data not current
Table 150: Daily Maintenance (MTCD) and Hourly Maintenance (MTCH) LNP NPA Measurements
UnitDescriptionEvent Name
peg countThe number of correct queriesreceived per NPANXX fornon-ported DN.
NPAQRCV
statusIndication of Data Validity:STATUS
K indicates good dataI indicates incompleteintervalN indicates data not current
FTP Reports
Hourly LNP System Wide Measurements
FTP Example Output File Name: mtch-lnp_19990116_2400.csv
FTP Example Output File Format:
"CLLI","SWREL","RPTDATE","RPTIME","TZ","RPTTYPE","RPTPD","IVALDATE","IVALSTART","IVALEND","NUMENTIDS"<cr><lf>
289E86977 Revision 1, July 2017
ReportsMeasurements
"tekelecstp","34.0.0-39.1.0","1999-01-17","15:51:37","EST","HOURLY MAINTENANCE MEASUREMENTS ON LNP SYSTEM","LAST","1999-01-16","00:00:00","24:00:00",1<cr><lf><cr><lf>"STATUS","LNPQRCV","LNPQDSC","LNPQTCPE","LNPSREP","LNPQUNPA"<cr><lf>"K",429496729,429496729,429496729,429496729,429496729<cr><lf>
Typical file size is:
Table 151: Typical File Size: mtch-lnp.csv
File Size=Report data+Reportheader+System
header
347 bytes=34+63+250
Hourly LNP Measurements Per SSPFTP Example Output File Name:mtch-ssp_19990116_2400.csv
FTP Example Output File Format:
"CLLI","SWREL","RPTDATE","RPTIME","TZ","RPTTYPE","RPTPD","IVALDATE","IVALSTART","IVALEND","NUMENTIDS"<cr><lf>"tekelecstp","34.0.0-39.1.0","1999-01-17","15:51:37","EST","HOURLY MAINTENANCE MEASUREMENTS ON LNPSSP","LAST","1999-01-16","00:00:00","24:00:00",200<cr><lf><cr><lf>"STATUS","SSP","PC_TYPE","SSPQRCV","CLASSGTRQ","LIDBGTRQ","SSPQRCVP","SSPQRCVNP","CLASSGTRQP","CLASSGTRQNP","LIDBGTRQP","LIDBGTRQNP","CNAMGTRQP","CNAMGTRQNP","ISVMGTRQP","ISVMGTRQNP","WSMSCGTP","WSMSCGTNP"<cr><lf>"K","002-002-100","ANSI",123456789,456789,99999,123456789,456789,99999,123456789,456789,99999,123456789,456789,99999,123456789,456789,99999<cr><lf>. . . . ."K","002-005-123","ANSI",123456789,456789,99999,123456789,456789,99999,123456789,456789,99999,123456789,456789,99999,123456789,456789,99999<cr><lf>
Assuming each data line will be:
4 char status + 14 char SSP + 10 char PC type + 15*(6 char data) + 2 = 120 chars
For a report of 200 SSPs, the typical file size is:
Table 152: Typical File Size: mtch-ssp.csv
File Size=Report data+Reportheader+System
header
24410 bytes=24000+160+250
Hourly LNP Measurements Per LRNFTP Example Output File Name:mtch-lrn_19990116_2400.csv
FTP Example Output File Format:
"CLLI","SWREL","RPTDATE","RPTIME","TZ","RPTTYPE","RPTPD","IVALDATE","IVALSTART","IVALEND","NUMENTIDS"<cr><lf>
290E86977 Revision 1, July 2017
ReportsMeasurements
"tekelecstp","34.0.0-39.1.0","1999-01-17","15:51:37","EST","HOURLY MAINTENANCE MEASUREMENTS ON LNP LRN","LAST","1999-01-16","00:00:00","24:00:00",600<cr><lf><cr><lf>"STATUS","LRN","LRNQRCV"<cr><lf>"K",9194560000,123456789<cr><lf>"K",4087550001,23456789<cr><lf>"K",5155550000,456789<cr><lf>. . . . ."K",3022330001,345<cr><lf>"K",7032110002,99999<cr><lf>"K",8123048059,4294967295<cr><lf>
Assuming each data line will be:
4 char status + 11 char LRN + 6 char data + 2 = 23 chars
For a report of 600 LRNs, the typical file size is:
Table 153: Typical File Size: mtch-lrn.csv
Report data+Reportheader+System
header
14077 bytes=13800+27+250
Hourly LNP Measurements Per NPAFTP Example Output File Name:mtch-npa_19990116_2400.csv
FTP Example Output File Format:
"CLLI","SWREL","RPTDATE","RPTIME","TZ","RPTTYPE","RPTPD","IVALDATE","IVALSTART","IVALEND","NUMENTIDS"<cr><lf>"tekelecstp","34.0.0-39.1.0","1999-01-17","15:51:37","EST","HOURLY MAINTENANCE MEASUREMENTS ON LNP NPANXX","LAST","1999-01-16","00:00:00","24:00:00",600<cr><lf><cr><lf>"STATUS","NPANXX","NPAQRCV"<cr><lf>"K",919456,123456789<cr><lf>"K",408755,23456789<cr><lf>"K",515555,456789<cr><lf>. . . . ."K",302233,345<cr><lf>"K",703211,99999<cr><lf>"K",812304,4294967295<cr><lf>
Assuming each data line will be:
4 char status + 7 char NPANXX + 6 char data + 2 = 19 chars
For a report of 600 LRNs, the typical file size is:
Table 154: Typical File Size: mtch-npa.csv
File Size=Report data+Reportheader+System
header
11680 bytes=11400+30+250
291E86977 Revision 1, July 2017
ReportsMeasurements
NP MTCH Report
The hourly Number Portability measurements specify the entity type NP (enttype=np) whichgenerates two separate reports per period. The command example will generate the following hourlyreports:
• Hourly System Wide Measurements
• Hourly Measurements Per SSP
NP_SSP and NP_SYS reports consider system-wide SCCP cards regardless of the database type (i.e.,RTDB/EPAP or RIDB/ELAP) in the system.
If any of the above cards are ISOLATED/OOS during a measurement interval, the respective reportis marked I. The report is marked K only when all the cards under consideration are IS_NR throughoutthe measurement interval.
Command Examples
• FTP
rept-ftp-meas:type=mtch:enttype=np[:period=specific:day=xxx]
Measurement Events
• System Wide Measurements
indicates system registers that may be pegged. Register counts for features not turned on willalways be zero.
Table 155: Daily Maintenance (MTCD) and Hourly Maintenance (MTCH) System-Wide Registers
UnitDescriptionEvent Name
peg countNumber of SMSREQ messagesresulting in error.
APSMRQERR
peg countNumber of SMSREQ messagesresulting in SMSREQ_ACK orSMSREQ_NACK.
APSMRQREP
peg countNumber of SMS Requestmessages received.
APSMSRCV
peg countNumber of SMS Requestmessages relayed.
APSMSREL
Peg CountNumber of non-call relatedmessages relayed by G-Port.
GPNOCL
Peg CountNumber of non-call relatedmessages that fell through toGTT.
GPNOCLGT
292E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
Peg CountNumber of call relatedmessages that cause an error
GPSRERR
response message(SRI-SendRouting InformationNEGATIVE ACK) because ofG-Port service failure. This doesnot include peg counts toregister GPSRERRPP.
Peg CountNumber of call related(SRI-Send Routing Information)
GPSRREPPP
messages that received G-Portservice specifically for feature:G-Port SRI query for Prepaid.This does not include pegcounts to register GPSRREP.
Peg CountNumber of call related(SRI-Send Routing Information)
GPSRGTT
messages that fell through toGTT. This does not include pegcounts to register GPSRGTTPP.
Peg CountNumber of call related(SRI-Send Routing Information)
GPSRGTTPP
messages that fell through toGTT specifically for feature:G-Port SRI query for Prepaid.This does not include pegcounts to register GPSRGTT.
Peg CountNumber of call related(SRI-Send Routing Information)
GPSRRCV
messages received. This doesnot include peg counts toregister GPSRRCVPP.
Peg CountNumber of call related(SRI-Send Routing Information)
GPSRRCVPP
messages received specificallyfor feature: G-Port SRI queryfor Prepaid. This does notinclude peg counts to registerGPSRRCV.
Peg CountNumber of call related(SRI-Send Routing Information)
GPSRREP
messages that received G-Portservice. This does not include
293E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
peg counts to registerGPSRREPPP.
Peg CountNumber of call relatedmessages that cause an error
GPSRERRPP
response message (SRI-SendRouting InformationNEGATIVE ACK) specificallyfor feature: G-Port SRI queryfor Prepaid. This does notinclude peg counts to registerGPSRERR.
peg countNumber of SRI_SM messagesresulting in error.
GPSRSMERR
peg countNumber of SRI_SM messagesreceived.
GPSRSMRCV
peg countNumber of SRI_SM messagesresulting in SRI_SM_ACK orSRI_SM_NACK.
GPSRSMREP
peg countNumber of invalid queries thatare discarded as no reply canbe generated.
INPQDSC
peg countNumber of total queriesreceived by INPQS.
INPQRCV
peg countNumber of queries received byINPQS that meet the conditionfor circular route detection.
INPQSCRD
peg countNumber of error replies withTCAP error code.
INPQTCPE
peg countNumber of successful replies toINP non-queried queries. These
INPSREP
replies will be either INPConnect, INP Continue, or INPReleaseCall (every time anINAP RELEASECALL responseis generated due to circularroute dection by INPQS).
peg countNumber of IS-41 locationrequest - error responsemessages sent.
IS41LRERR
294E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
peg countNumber of IS-41 locationrequest messages received
IS41LRMRCV
peg countNumber of IS-41 locationrequest - return result messagessent
IS41LRRTRN
peg countNumber of times CircularRoute is Detected
MNPCRD
peg countNumber of MO_SMS messagesreceived that result in an error
SMSMOGERR
peg countNumber of MO_SMS messagesreceived that result in a
SMSMOGRCV
modification of the outgoingMO_SMS
peg countNumber of SMDPP messagesreceived that result in an error
SMSMOIERR
peg countNumber of SMDPP messagesreceived that result in a
SMSMOIRCV
modification of the outgoingSMDPP.
statusIndication of Data Validity:STATUS
K indicates good dataI indicates incompleteintervalN indicates data not current
peg countTotal number of MSUsprocessed by TIF and
TIFFPFXRLS
blacklisted by the FPFXRLSService Action
peg countTotal number of MSUsprocessed by TIF and
TIFNFNDRLS
blacklisted by the BLNFNDRLSService Action
peg countTotal number of MSUsprocessed by TIF and
TIFNOCGRLS
blacklisted by theNOCGPNRLS Service Action
peg countTotal number of MSUsprocessed by TIF and
TIFRLS
295E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
blacklisted by the BLRLSService Action
peg countNumber of MSUs processed byTIF and found to be blacklistedby SELSCR Service Action
TIFSSCRRLS
peg countNumber of MSUs processed byTIF and relayed by SELSCRService Action
TIFSSCRRLY
peg countNumber of IAM messagesreceived that required TIF
TINPERR
processing but resulted inexecution of an error case.
peg countNumber of IAM messagesreceived that required TIF
TINPMGEN
processing and resulted in themodification of the IAMmessage or the generation of aREL message.
peg countNumber of IAM messagesreceived that require TIFprocessing.
TINPMRCV
The following equations apply:
INPQRCV = INPQDSC + INPQTCPE + INPSREP
GPSRRCV = GPSRGTT + GPSRREP + GPSRERR
GPSRRCVPP = GPSRGTTPP + GPSRREPPP + GPSRERRPP
GPSRSMRCV = GPSRSMREP + GPSRSMERR
• Per SSP Measurements
These measurements are available on a per SSP PC basis where SSP PC is the CGPA PC, if it exists,or it is the MTP OPC.
Table 156: Daily Maintenance (MTCD) and Hourly Maintenance (MTCH) SSP Registers
UnitDescriptionEvent Name
peg countNumber of call relatedLOCREQ messagesacknowledged.
APLRACK
peg countNumber of call relatedLOCREQ messages relayed.
APLRRLY
296E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
peg countNumber of non-callnon-LOCREQ related messagesrelayed.
APNOCL
peg countNumber of non-callnon-LOCREQ related messagesthat fell through to GTT.
APNOCLGT
peg countNumber of SMSREQ messagesresulting in error.
APSMRQERR
peg countNumber of SMSREQ messagesresulting in SMSREQ_ACK orSMSREQ_NACK
APSMRQREP
peg countNumber of SMSREQ messagesreceived
APSMSRCV
peg countNumber of non-call relatedmessages relayed by G-Port.
GPNOCL
peg countNumber of non-call relatedmessages that fell through toGTT.
GPNOCLGT
peg countNumber of call related(SRI-Send Routing Information
GPSRACK
ACK) responses. This does notinclude peg counts to registerGPSRACKPP.
peg countNumber of call related(SRI-Send Routing Information
GPSRACKPP
ACK) responses specifically forfeature 61544: G-Port SRI queryfor Prepaid. This does notinclude peg counts to registerGPSRACK.
peg countNumber of call related SRINegative ACK responses in
GPSRNACK
case of successful G-Portservice.
peg countNumber of call related(SRI-Send Routing Information)messages relayed.
GPSRRLY
peg countNumber of SRI_SM messagesresulting in error.
GPSRSMERR
297E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
peg countNumber of SRI_SM messagesreceived.
GPSRSMRCV
peg countNumber of SRI_SM messagesresulting in SRI_SM_ACK orSRI_SM_NACK
GPSRSMREP
peg countNumber of messages sent toMR service that fall through to
INPMRCRD
GTT due to circular routedetection.
peg countNumber of messages sent toMR service that fall through to
INPMRGTT
GTT. This includes the numberof messages sent to MR servicethat fall through to GTT due tocircular route detection.
peg countNumber of messages sent toMR service that receive MRtranslation.
INPMRTR
peg countNumber of non-erroredQSmessages with QS Connectresponses, per originating SSP.
INPQSCONN
peg countNumber of non-errored QSmessages with QS Continueresponses, per originating SSP.
INPQSCONT
peg countNumber of messages sent toINP QS that meet the conditionfor circular route detection.
INPQSCRD
peg countNumber of messages sent toINP QS that result in successful
INPQSREL
generation of INAPRELEASECALL response dueto circular route detection byINPQS.
peg countNumber of times CircularRoute is Detected.
MNPCRD
textTYPE of the point code. Validvalues are ANSI, ITUI, ITUN,and ITUN24.
PC Type
peg countNumber of MO_SMS messagesreceived that result in an error
SMSMOGERR
298E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
peg countNumber of MO_SMS messagesreceived that result in a
SMSMOGRCV
modification of the outgoingMO_SMS
peg countNumber of SMDPP messagesreceived that result in an error
SMSMOIERR
peg countNumber of SMDPP messagesreceived that result in a
SMSMOIRCV
modification of the outgoingSMDPP
statusIndication of Data Validity:STATUS
K indicates good dataI indicates incompleteintervalN indicates data not current
peg countTotal number of MSUsprocessed by TIF and
TIFRANGEBL
blacklisted by the FPFXRLS orNOCGPNRLS Service Action
peg countTotal number of MSUsprocessed by TIF and found to
TIFSBSCRBL
be blacklisted by BLRLS orBLNFNDRLS Service Actions
peg countNumber of IAM messagesprocessed by TIF which
TIFSELSCR
resulted in either an ISUPmessage generation or the MSUbeing relayed by SELSCRService Action
peg countNumber of IAM messagesreceived that required TIF
TINPERR
processing but resulted inexecution of an error case.
peg countNumber of IAM messagesreceived that required TIF
TINPMGEN
processing and resulted in themodification of the IAMmessage or the generation of aREL message.
299E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
peg countNumber of IAM messagesreceived that require TIFprocessing.
TINPMRCV
The following equation applies to NP registers:
GPSRREP = ∑GPSRACK + ∑GPSRRLY+ ∑GPSRNACK
FTP Reports
• Hourly System Wide Measurements
FTP Example Output File Name:mtch-np_20080125_2400.csv
FTP Example Output File Format:
"CLLI","SWREL","RPTDATE","RPTIME","TZ","RPTTYPE","RPTPD","IVALDATE","IVALSTART","IVALEND","NUMENTIDS""e1061001","EAGLE5 42.0.0-63.33.0","2010-08-20","00:00:50","EST ","HOURLY MAINTENANCE MEASUREMENTS ON NP SYSTEM","LAST","2010-08-19","23:00:00","24:00:00",1
"STATUS","INPQRCV","INPQDSC","INPQTCPE","INPSREP","GPSRRCV","GPSRGTT","GPSRREP","GPSRERR","GPNOCL","GPNOCLGT","IS41LRERR","IS41LRMRCV","IS41LRRTRN","GPSRRCVPP","GPSRGTTPP","GPSRREPPP","GPSRERRPP","APSMSRCV","APSMSREL","TINPMRCV","TINPMGEN","TINPERR","SMSMOIRCV","SMSMOIERR","SMSMOGRCV","SMSMOGERR","GPSRSMREP","GPSRSMERR","GPSRSMRCV","APSMRQREP","APSMRQERR","INPQSCRD","MNPCRD""K",0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,
Assuming each data line will be: 4 char status + 33 * (6 char data) + 2 = 204 chars
Typical file size is:
Table 157: Typical File Size: mtch-np.csv
File Size=Report data+Reportheader+System
header
832 bytes=204+378+250
• Hourly Measurements Per SSP
FTP Example Output File Name: mtch-ssp_20080125_2400.csv
FTP Example Output File Format:
"CLLI","SWREL","RPTDATE","RPTIME","TZ","RPTTYPE","RPTPD","IVALDATE","IVALSTART","IVALEND","NUMENTIDS""e1061001","EAGLE5 42.0.0-63.33.0","2010-08-20","00:00:51","EST ","HOURLYMAINTENANCE MEASUREMENTS ON NP SSP","LAST","2010-08-19","23:00:00","24:00:00",3"STATUS","SSP","PC_TYPE","INPQSCONN","INPQSCONT","INPMRTR","INPMRGTT","GPSRACK","GPSRRLY","GPNOCL","GPNOCLGT","GPSRACKPP","APLRACK","APLRRLY","APNOCL","APNOCLGT","TINPMRCV","TINPMGEN","TINPERR","SMSMOIRCV","SMSMOIERR","SMSMOGRCV","SMSMOGERR","GPSRSMREP","GPSRSMERR","GPSRSMRCV","APSMRQREP","APSMRQERR","APSMSRCV","INPQSCRD","INPQSREL","INPMRCRD","MNPCRD","GPSRNACK""K"," 001-001-001","ANSI",0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,"K","
300E86977 Revision 1, July 2017
ReportsMeasurements
101-001-001","ANSI",0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,"K"," 201-001-001","ANSI",0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,
Assuming each data line will be: 4 char status + 14 char SSP + 10 char PC type + 31 * (6 char data)+ 2 = 216 chars
Typical file size is:
Table 158: Typical File Size: mtch-ssp.csv
File Size=Report data+Reportheader+System
header
606 + (216 *#PointCodes) bytes
=(216 * #PointCodes )
+356+250
For a report of 200 SSPs, typical file size is:
Table 159: Typical File Size: mtch-ssp.csv
File Size=Report data+Reportheader+System
header
43806 bytes=(216 * 200 )+356+250
EIR MTCH Report
The EIR measurements specify the entity type EIR, and generate one report per period. The commandsare specified with yy as a two-number abbreviation for any hour of a 24-hour day (00 through 23 forthe hours 0000 through 2300). The retention period for hourly measurement records is 24 hours.
Example Commands:
FTP: rept-ftp-meas:type=mtch:enttype=eir:[hh=yy:period=specific]
Table 160: Daily Maintenance (MCTD) and Hourly Maintenance (MTCH) EIR Measurements lists the EIRevents and their descriptions.
Table 160: Daily Maintenance (MCTD) and Hourly Maintenance (MTCH) EIR Measurements
UnitDescriptionEvent Name
peg countTotal number ofMAP_CHECK_IMEI messagesreceived
IMEIRCV
peg countTotal number of searches thatresulted in a match with a “whitelisted” IMEI
WHITEIMEI
301E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
peg countTotal number of searches thatresulted in a match with a “graylisted” IMEI
GRAYIMEI
peg countTotal number of searches thatresulted in a match with a “blacklisted” IMEI
BLACKIMEI
peg countTotal number of searches thatresulted in a match with a “black
BLKALIMEI
listed” IMEI, but were alloweddue to IMSI Check match
peg countTotal number of searches thatresulted in a match with a “black
BLKNALIMEI
listed” IMEI, and the IMSI in thedatabase did not match the IMSIin the message
peg countTotal number of searches thatresulted in a match with an“unknown” IMEI
UNKNIMEI
peg countTotal number of searches thatresulted in no match in thedatabase.
NOMTCHIMEI
NOMTCHIMEI is peggedwhenever an IMEI is not foundin the database.
statusIndication of Data Validity:STATUS
K indicates good dataI indicates incompleteintervalN indicates data not current
The following equation applies:
IMEIRCV = WHITEIMEI + GRAYIMEI + BLACKIMEI + UNKNIMEI + BLKALIMEI + BLKNALIMEI+ ERRORS
where ERRORS are not pegged in any measurement register and include check_imei queries withresponse type REJECT, RETURN ERROR (IMEI status anything other than unknown and not matched)
FTP ReportsFTP Example Output File Name: mtch-eir_20030818_2300.csv
302E86977 Revision 1, July 2017
ReportsMeasurements
FTP Example Output File Format:
"CLLI","SWREL","RPTDATE","RPTIME","TZ","RPTTYPE","RPTPD","IVALDATE","IVALSTART","IVALEND","NUMENTIDS"<cr><lf>"tekelecstp","34.0.0-51.1.0","2003-08-19","15:51:37","EST","HOURLY MAINTENANCE MEASUREMENTS ON EIR SYSTEM","LAST","2003-08-18", "23:00:00","24:00:00",1<cr><lf><cr><lf>"IMEIRCV","WHITEIMEI","GRAYIMEI","BLACKIMEI","BLKALIMEI","BLKNALIMEI","UNKNIMEI","NOMTCHIMEI"<cr><lf>4294967295,4294967295,4294967295,4294967295,4294967295,4294967295,4294967295, 4294967295<cr><lf>
Typical file size is:
Table 161: Typical File Size: mtch-eir.csv
File Size=Report data+Reportheader+System
header
440 bytes=89+95+256
MAPSCRN MTCH Report
The enttype=mapscrn entity generates two separate reports per period.
FTP reports are generated as CSV files and FTP'd to the customer FTP server. The command examplegenerates the following hourly measurement reports when the GSM MAP Screening feature is activated:
• Hourly MAP Screening System Wide Measurements
• Hourly MAP Screening Measurements Per Server
The command example will generate the following hourly measurement reports when the GSMMAP/Enhanced GSM MAP Screening feature is activated:
• Hourly MAP Screening System Wide Measurements
• Hourly MAP Screening Measurements Per Path
Example Commands:
FTP: rept-ftp-meas:type=mtch:enttype=mapscrn
Note: When MTP MAP Screening is enabled and on, the registers in Table 162: Daily Maintenance(MTCD) and Hourly Maintenance (MTCH) MAP Screening System Wide Measurements and Table 165:Daily Maintenance (MTCD) and Hourly Maintenance (MTCH) MAP Screening Per Server Measurementsinclude the sum total of MTP-routed and GTT-routed messages for the particular event.
303E86977 Revision 1, July 2017
ReportsMeasurements
Table 162: Daily Maintenance (MTCD) and Hourly Maintenance (MTCH) MAP Screening SystemWide Measurements
UnitDescriptionEvent Name
countTotal number of messages thatPassed MAP screening
MSCRNPASS
countTotal number of messages thatgot Rejected by MAP screening
MSCRNRJNE
because an entry was not foundin the MAP screening table (i.e.,rejected as System wide MAPOpcode action is DISCARD)
countTotal number of messages thatgot Rejected by MAP screening
MSCRNRJFP
due to forbidden parameters inthe message.
countTotal number of messages thatcontained the forbidden
MSCRNPAFP
parameter but were not rejecteddue to Screening action set asPASS.
countTotal number of messages,where an entry was not found in
MSCRNPANE
the MAP screening table but theMessage was not rejected asscreening action was marked asPASS (i.e., not rejected as Systemwide MAP Opcode action isPASS)
countTotal number of message thatgot rejected as Message MAP
MSCRNRJOP
Opcode was not found in theMAP Opcode table (system wideaction - DISCARD for the nonmatching OPCODEs)
countTotal number of messages thatwere selected by MAP Screening
MSCRNDUP
for the Duplicate screeningaction.
countTotal number of messages thatewere selected by MAP Screeningfor the Forward screening action.
MSCRNFOR
countTotal number of messages thatewere selected by MAP Screening
MSCRNDAD
304E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
for the Duplicate and Discardscreening action.
statusIndication of Data Validity:STATUS
K indicates good dataI indicates incompleteintervalN indicates data not current
Server Entity Identification information in Table 163: Server Entity Identification is used to clarify theserver. The Maintenance MAP Screening Per Server Measurements are applicable.
Table 163: Server Entity Identification
DescriptionEntity Name
The screened origination address of the callingparty address (CGPA) assigned when the GSMMAP screen was entered.
SERVER
The screened number plan value (NPV) assignedto the server address when the GSM MAP screen
NP
was entered. This field is filled with the defaultidentifier * if no value was assigned.
The screened nature of address value (NAIV)assigned to the server address when the GSM
NAI
MAP screen was entered. This field is filled withthe default identifier * if no value was assigned.
The operation code number assigned when theGSM MAP opcode was entered.
OPCODE
Measurements does not report entries created fora range of addresses.
Server Path Entity Identification information in Table 164: Path Entity Identification is used to clarifythe path. The Maintenance MAP Screening Per Path Measurements are applicable.
Table 164: Path Entity Identification
DescriptionEntity Name
The screened origination address of the callingparty address (CGPA-NP-NAI), or a combination
PATH
of screened destination address of the called partyaddress (CDPA-NP-NAI) and the screenedorigination addresses assigned when the GSMMAP screen was entered.
305E86977 Revision 1, July 2017
ReportsMeasurements
DescriptionEntity Name
The possible fields within the path are delimitedas follows to allow for efficient sorting:
• When both the origination and destinationaddresses are present (as either single serverentries or provisioned wildcard entries) theorigination address is preceded by a carat (^) andthe destination address is preceded by a "greaterthan" sign (>):
^CGPA-NP-NAI>CDPA-NP-NAI
• When only the origination address is present(occurs when the CDPA is a default wildcard) itis preceded by a "less than" sign (<):
<CGPA-NP-NAI
The calling party global title address assignedwhen the GSM MAP screen was entered. Any or
CGPA
all of the three fields (GTA, NP, NAI) can be filledwith the identifier (*) if a wildcard value isassigned for that field. There is no defaultwildcard value for the CGPA.
The called party global title address assignedwhen the GSM MAP screen was entered. Any or
CDPA
all of the three fields (GTA, NP, NAI) can be filledwith the identifier (*) if a wildcard value isassigned for that field. If the CDPA value is notassigned, the default wildcard value, which is notprinted, is assumed.
The screened number plan value (NPV) assignedto the path address when the GSM MAP screen
NP
was entered. The identifier (*) is used to signify awildcard NP.
The screened nature of address value (NAIV)assigned to the path address when the GSM MAP
NAI
screen was entered. The identifier (*) is used tosignify a wildcard NAI.
The operation code number assigned when theGSM MAP opcode was entered. The identifier (*)is used to signify a wildcard opcode.
OPCODE
Note:
Measurements does not report entries created for a range of addresses.
Measurements does not report default wildcard CDPA address in entries containing them.
306E86977 Revision 1, July 2017
ReportsMeasurements
There can never be a default wildcard CGPA entry. All wildcard CGPA entries must be explicitlyprovisioned. There can never be an entry with only a CDPA path listed.
The string formats were designed to allow efficient automated post processing of measurementsreports. A brief note explaining the format is included in the report.
Table 165: Daily Maintenance (MTCD) and Hourly Maintenance (MTCH) MAP Screening PerServer Measurements
UnitDescriptionEvent Name
countTotal number of messages thatPassed MAP screening
MSCRNPASS
countTotal number of messages thatgot Rejected by MAP screening
MSCRNRJFP
due to forbidden parameters inthe message.
countTotal number of messages perserver that were selected by
MSCRNDUP
MAP Screening for the Duplicatescreening action.
countTotal number of messages perserver that were selected by
MSCRNFOR
MAP Screening for the Forwardscreening action.
countTotal number of messages perserver that were selected by
MSCRNDAD
MAP Screening for the Duplicatescreening action.
countTotal number of messages thatcontained the forbidden
MSCRNPAFP
parameter but were not rejecteddue to Screening action set asPASS.
statusIndication of Data Validity:STATUS
K indicates good dataI indicates incompleteintervalN indicates data not current
FTP Reports
Hourly MAP Screening System Wide Measurements
FTP Example Output File Name: mtch-map_19990116_2400.csv
307E86977 Revision 1, July 2017
ReportsMeasurements
FTP Example Output File Name: mtch-map_19990116_2400.csv
"CLLI","SWREL","RPTDATE","RPTIME","TZ","RPTTYPE","RPTPD","IVALDATE","IVALSTART","IVALEND","NUMENTIDS""e1061001","EAGLE5 42.0.0-63.33.0","2010-08-21","00:00:52","EST ","HOURLY MAINTENANCE MEASUREMENTS ON MAPSCRN SYSTEM","LAST","2010-08-20","23:00:00","24:00:00",1
"STATUS","MSCRNPASS","MSCRNRJOP","MSCRNRJNE","MSCRNRJFP","MSCRNPAFP","MSCRNPANE","MSCRNFOR","MSCRNDUP","MSCRNDAD""K",0,0,0,0,0,0,0,0,0,
Typical file size is:
Table 166: Typical File Size: mtch-map.csv
File Size=Report data+Reportheader+System
header
426 bytes=60+116+250
Hourly MAP Screening Measurements Per PathFTP Example Output File Name:mtch-path_19990116_2400.csv
FTP Example Output File Format:
"CLLI","SWREL","RPTDATE","RPTIME","TZ","RPTTYPE","RPTPD","IVALDATE","IVALSTART","IVALEND","NUMENTIDS""e1061001","EAGLE5 42.0.0-63.33.0","2010-08-21","00:00:53","EST ","HOURLY MAINTENANCE MEASUREMENTS ON MAPSCRN PER-SERVER","LAST","2010-08-20","23:00:00","24:00:00",11
"For a path containing CGPA only, PATH-OPCODE = <CGPA-NP-NAI-OPCODE""For a path containing both CGPA and CDPA, PATH-OPCODE = ^CGPA-NP-NAI>CDPA-NP-NAI-OPCODE"
"STATUS","PATH-OPCODE","MSCRNPASS","MSCRNRJFP","MSCRNFOR","MSCRNDUP","MSCRNDAD","MSCRNPAFP""K","<123456789012345-*-*-0",0,0,0,0,0,0"K","<234567890123456-*-*-0",0,0,0,0,0,0"K","<345678901234567-*-*-0",0,0,0,0,0,0"K","<456789012345678-*-*-0",0,0,0,0,0,0"K","<567890123456789-*-*-0",0,0,0,0,0,0"K","<678901234567890-*-*-0",0,0,0,0,0,0"K","<789012345678901-*-*-0",0,0,0,0,0,0"K","<123456789012345-*-*-1",0,0,0,0,0,0"K","<234567890123456-*-*-1",0,0,0,0,0,0"K","<345678901234567-*-*-1",0,0,0,0,0,0"K","<456789012345678-*-*-1",0,0,0,0,0,0
Assuming each data line will be:
4 char status + 40 char PATH-OPCODE + 6*(6 char data) + 2 = 82 chars
For a report of 20 paths, the typical file size is:
Table 167: Typical File Size: mtch-path.csv
File Size=Report data+Reportheader+System
header
2141 bytes=1640+251+250
308E86977 Revision 1, July 2017
ReportsMeasurements
VFLEX MTCH Report
The enttype=vflex entity generates two separate reports per period. These reports are generated asCSV files and FTP'd to the customer FTP server. The command example will generate the followingdaily reports:
• Hourly V-Flex System Wide Measurements
• Hourly V-Flex Measurements Per SSP
Example Commands:
FTP: rept-ftp-meas:type=mtch:enttype=vflex[:period=specific:day=xxx]
Table 168: Daily Maintenance V-Flex System Wide Measurements
UnitDescriptionEvent Name
statusIndication of Data Validity:STATUS
K indicates good dataI indicates incompleteintervalN indicates data not current
peg countTotal number of IDP Connectresponses sent by VFLEX service.
VFCNCTRSP
peg countTotal number of IDP queriesreceived with errors (those
VFERRRSP
resulted in TCAP Error responsefrom VFLEX).
peg countTotal number of IDP queriesreceived for VFLEX service.
VFIDPQRCV
Table 169: Daily Maintenance V-Flex Per SSP Measurements
UnitDescriptionEvent Name
statusIndication of Data Validity:STATUS
K indicates good dataI indicates incompleteintervalN indicates data not current
peg countTotal number of IDP queriesreceived for VFLEX service withinvalid MSISDN.
VFIMSISDN
309E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
peg countTotal number of IDP queriesreceived for VFLEX service withvalid MSISDN.
VFVMSISDN
FTP Reports
Hourly V-Flex System Wide Measurements
FTP Example Output File Name: mtch-vflex_20070816_2400.csv
FTP Example Output File Format:
"CLLI","SWREL","RPTDATE","RPTIME","TZ","RPTTYPE","RPTPD","IVALDATE","IVALSTART","IVALEND","NUMENTIDS"<cr><lf>"tekelecstp","37.6.0-58.20.0","2007-08-17","11:32:53","EST","HOURLY MAINTENANCE MEASUREMENTS ON VFLEX SYSTEM","LAST","2007-08-16","00:00:00","24:00:00",1<cr><lf><cr><lf>"STATUS","VFIDPQRCV","VFCNCTRSP","VFERRRSP"<cr><lf>"K", 20,10,10<cr><lf>
Assuming each data line will be: 4 char status + 3*(6 char data) + 2 = 24 chars, the typical file size is:
Table 170: Typical File Size: mtch-vflex.csv
File Size=Report data+Reportheader+System
header
347=24+45+260
Hourly V-Flex Measurements Per SSPMP Example Output File Name:mtch-vflexssp_20070816_2400.csv
MP Example Output File Format:
"CLLI","SWREL","RPTDATE","RPTIME","TZ","RPTTYPE","RPTPD","IVALDATE","IVALSTART","IVALEND","NUMENTIDS""<cr><lf>"tekelecstp","37.6.0-58.20.0","2007-08-17","11:32:58","EST","HOURLY MAINTENANCE MEASUREMENTS ON VFLEX SSP","LAST","2007-08-16","00:00:00","24:00:00",1<cr><lf><cr><lf>"STATUS",“SSP”,“VFVMSISDN”,“VFIMSISDN”<cr><lf>“K”, “001-101-002”,10,10<cr><lf>
Note: The field identifier SSP designates the Service Switching Point.
Assuming each data line will be: 4 char status + 14 char SSP + 2*(6 char data) + 2 = 32 chars, the typicalfile size is:
310E86977 Revision 1, July 2017
ReportsMeasurements
Table 171: Typical File Size: mtch-vflexssp.csv
File Size=Report data+Reportheader+System
header
297 + (32 *#PointCodes) bytes
=32 * #PointCodes
+40+257
For a report of 200 SSPs, typical file size is:
Table 172: Typical File Size: mtch-vflexssp.csv
File Size=Report data+Reportheader+System
header
6697 bytes=32 * 200+40+257
ATINPQ MTCH Report
The enttype=atinpq entity generates two separate reports per period. These reports are generated asCSV files and FTP'd to the customer FTP server. The command example will generate the followingdaily reports:
• Hourly ATINPQ System Wide Measurements
• Hourly ATINPQ Per SSP Measurements
Example Commands:
• FTP
rept-ftp-meas:type=mtch:enttype=atinpq[:period=specific:hh=xxx]
Measurement Events
Table 173: Daily Maintenance (MTCD) and Hourly Maintenance (MTCH) ATINPQ Registers
UnitDescriptionEvent Name
peg countTotal number of ATINP queriesreceived for ATINPQ service.
ATINPQRCV
This peg is incremented only ifATINP feature is enabled andthe incoming message opcode isATI.
peg countTotal number of ATI ACKmessages sent by the ATINPQ
ATINPQACK
service. This peg is incremented
311E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
only if the ATINP feature isenabled.
peg countTotal number of incoming ATImessages that did not result in
ATINPQERR
either ATI ACK or ATI NACKwith error code of eitherUnknown Subscriber or ATI NotAllowed. This peg isincremented only if the ATINPfeature is enabled.
statusIndication of Data Validity:STATUS
K indicates good dataI indicates incompleteintervalN indicates data not current
textThe TYPE of the point code.Valid values are ANSI, ITUI,ITUN, and ITUN24.
PC TYPE
Hourly ATINPQ Reports
System Wide Report
• Example Output File Name:
mtch-atinpq_20080616_2400.csv
• Example Output File Format:
"CLLI","SWREL","RPTDATE","RPTIME","TZ","RPTTYPE","RPTPD","IVALDATE","IVALSTART","IVALEND","NUMENTIDS"<cr><lf>"tekelecstp","39.0.0-61.5.0","2008-06-17","11:32:53","EST","HOURLY MAINTENANCE MEASUREMENTS ON ATINPQ SYSTEM","LAST","2008-06-17","00:00:00","24:00:00",1<cr><lf><cr><lf>"STATUS","ATINPQRCV","ATINPQACK","ATINPQERR"<cr><lf>"K", 20,10,10<cr><lf>
Assuming each data line will be: 4 char status + 3*(6 char data) + 2 = 24 chars, the typical file sizeis:
Table 174: Typical File Size: mtch-atinpq.csv
File Size=Report data+Reportheader+System
header
347=24+45+260
312E86977 Revision 1, July 2017
ReportsMeasurements
Per SSP Report
• Example Output File Name:
mtch-atinpqssp_20080616_2400.csv
• Example Output File Format:
"CLLI","SWREL","RPTDATE","RPTIME","TZ","RPTTYPE","RPTPD","IVALDATE","IVALSTART","IVALEND","NUMENTIDS""<cr><lf>"tekelecstp","39.0.0-61.5.0","2008-06-17","11:32:58","EST","HOURLY MAINTENANCE MEASUREMENTS ON ATINPQ SSP","LAST","2008-06-16","00:00:00","24:00:00",1<cr><lf><cr><lf>"STATUS",“SSP”,“ATINPQRCV”,“ATINPQACK”,“ATINPQERR”<cr><lf>“K”, “001-101-002”,10,10,10<cr><lf>
Assuming each data line will be: 4 char status + 14 char SSP + 3*(6 char data) + 2 = 38 chars, thetypical file size is:
Table 175: Typical File Size: mtch-atinpq.csv
File Size=Report data+Reportheader+System
header
297 + (38 *#Point
Codes) bytes
=(38 * #PointCodes)
+40+257
For a report of 200 SSPs, typical file size is:
Table 176: Typical File Size: atinpq 200 SSPs
File Size=Report data+Reportheader+System
header
7897 bytes=(38 * 200)+40+257
AIQ MTCH Report
The entity type for ANSI41 AIQ measurements is “AIQ”, which generates two reports per period. Thecommands to generate the hourly on-demand measurement report can be specified with an optionalhour parameter, xxxx, providing a four-digit hour (0100, 0200, 2300, and so on). The specific period,period=specific, parameter is required when the optional hour parameter is used.
The measurements reports supported are:
• Per System Totals
• Per SSP Totals
The measurement report types supported are:
• Daily measurement report type "mtcd"
• Hourly measurement report type "mtch"
313E86977 Revision 1, July 2017
ReportsMeasurements
The on demand reports and scheduled reports are rejected until the AIQ feature is enabled. Thecommand chg-mtc-measopts:mtchaiq=on:mtcdaiq=on starts scheduled reports generation.Both on-demand and scheduled reports at hourly and daily boundary (MTCH and MTCD) generatetwo reports, namely Per System totals and Per SSP totals.
Example Commands:
• UI: Not applicable.
• FTP: rept-ftp-meas:type=mtcd:enttype=aiq[:period=specific:hh=xxxx]
This command creates both the Per System and Per SSP Totals hourly reports.
Measurement Events
Table 177: Daily Maintenance (MTCD) and Hourly Maintenance (MTCH) AIQ Registers
UnitDescriptionEvent Name
peg countTotal number ofAnalyzedInformation messages
AIQRCV
received for AIQ service. Thispeg is incremented only ifANSI41 AIQ feature is enabled.
peg countTotal number of Return Resultsent by the AIQ service. This peg
AIQSUCC
is incremented only if theANSI41 AIQ feature is enabled.
peg countTotal number of ANSI41 AIQqueries resulting in a negative
AIQERR
response (Return Error or Reject)generation by AIQ service. Thispeg is incremented only if theANSI41 AIQ feature is enabled.
textThe TYPE of the point code.Valid values are ANSI, ITUI,ITUN, and ITUN24.
PC TYPE
Daily AIQ Reports
System Wide Report
• Example Output File Name:
mtcd-aiq_20090820_2400.csv
• Example Output File Format:
"CLLI","SWREL","RPTDATE","RPTIME","TZ","RPTTYPE","RPTPD","IVALDATE","IVALSTART","IVALEND","NUMENTIDS"<cr><lf>"tekelecstp","41.0.0-62.34.51","2009-08-20","11:32:53","EST","DAILY MAINTENANCE
314E86977 Revision 1, July 2017
ReportsMeasurements
MEASUREMENTS ON AIQ SYSTEM","LAST","2009-08-20","00:00:00","24:00:00",1<cr><lf><cr><lf>"STATUS","AIQRCV","AIQSUCC","AIQERR"<cr><lf>"K",20,10,10<cr><lf>
Assuming each data line will be: 4 char status + 3*(6 char data) + 2 = 24 chars, the typical file sizeis:
Table 178: Typical File Size: mtcd-atinpq.csv
File Size=Report data+Reportheader+System
header
322=24+38+260
Per SSP Report
• Example Output File Name:
mtcd-aiqssp_20090820_2400.csv
• Example Output File Format:
"CLLI","SWREL","RPTDATE","RPTIME","TZ","RPTTYPE","RPTPD","IVALDATE","IVALSTART","IVALEND","NUMENTIDS""<cr><lf>"tekelecstp","41.0.0-62.34.51","2009-08-20","11:32:58","EST","DAILY MAINTENANCE MEASUREMENTS ON AIQ SSP","LAST","2009-08-19","00:00:00","24:00:00",1<cr><lf><cr><lf>"STATUS",“SSP”,“AIQRCV”,“AIQSUCC”,“AIQERR”<cr><lf>“K”, “001-101-002”,20,10,10<cr><lf>
Assuming each data line will be: 4 char status + 14 char SSP + 3*(6 char data) + 2 = 38 chars, thetypical file size is:
Table 179: Typical File Size: mtcd-aiq.csv
File Size=Report data+Reportheader+System
header
301 + ( 38 *#Point
=( 38 * #Pointcodes )
+44+257
Codes )bytes
For a report of 200 SSPs, typical file size is:
Table 180: Typical File Size: aiq 200 SSPs
File Size=Report data+Reportheader+System
header
7901 bytes=( 38 * 200 )+44+257
315E86977 Revision 1, July 2017
ReportsMeasurements
GTTPATH MTCH Report
The entity type for GTT Actions Per-Path measurements is “gttapath”, which generates two reportsper period. The commands to generate the hourly on-demand measurement report can be specifiedwith an optional hour parameter, xxxx, providing a four-digit hour (0100, 0200, 2300, and so on). Thespecific period, period=specific, parameter is required when the optional hour parameter is used.
The measurement report supported are:
• Per System Totals
• Per Path Totals
The measurement report types supported are:
• Daily measurement report type “mtcd”
• Hourly measurement report type “mtch”
The on-demand reports and scheduled reports are rejected until the GTT Duplicate and/or Discardand/or Forward Action feature is enabled. Turning ON the feature is not required, because one of theregister “GTTACTNA” might get pegged in case GTT action fails because of the feature not being inthe ON state.
The command chg-mtc-measopts:mtchgttapath=on:mtcdgttapath=on starts scheduledreports generation. Both on-demand and scheduled reports at hourly and daily boundary (MTCHand MTCD) generate two reports: Per System Totals and Per-Path.
Example Commands:
UI: Not applicable.FTP: rept-ftp-meas:type=mtch:enttype=gttapath[:period=specific:hh=xxxx]where [:period=specific:hh=xxxx] is optional.
This example command creates both the Per-Path System Totals and the Per-Path Totals daily reports(the report date corresponds to the day entered in the command).
Table 181: MTCD/MTCH GTT Actions System-Wide Measurements
UnitDescriptionEvent Name
peg countGTT Actions – MSUs Discarded- The total number of messages
GTTADISC0
discarded by the DISCARD GTTAction.
peg countGTT Actions – MSUs Discarded- The total number of messages
GTTADISC1
discarded by the UDTS GTTAction.
peg countGTT Actions – MSUs Discarded- The total number of messages
GTTADISC2
discarded by the TCAP ErrorGTT Action
316E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
peg countGTT Actions – MSUsDuplicated - The total number
GTTADUP
of messages for which DuplicateMSU was sent. Multipleduplicate actions in an action setshall also increment this registeronly once.
peg countGTT Actions – MSUsForwarded - The total number
GTTAFWD
of messages forwarded byForward GTT Action.
peg countGTT Actions - The total numberof messages receiving any GTTaction.
GTTASET
peg countThe total number of messagesserviced by GFLEX GTT Action.
GTTASRVGFLX
peg countThe total number of messagesserviced by GPORT GTT Action.
GTTASRVGPRT
peg countThe total number of messagesserviced by SMSMR GTT Action.
GTTASRVSMSR
peg countThe total number of messagesserviced by SFLOG GTT Action.
GTTASFLOG
peg countThe total number of messagesthat successfully pass SCPVALGTT Action.
GTTAMSVTO
peg countThe total number of messagesdiscarded by SCPVAL GTTAction.
GTTAMSVDI
peg countThe total number of messageswhere validation was notapplied by SCPVAL GTT Action.
GTTAMSVNA
Table 182: MTCD/MTCH GTT Actions Per-Path Measurements
UnitDescriptionEvent Name
pegcount
GTT Actions - The total number of messages for which no GTT action wassuccessfully performed.
GTTACTNA
This register shall be pegged for a message if either of these occurs:
• No GTT Action set was associated with the final GTT translation
317E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name• No GTT Action in the associated GTT Action set could be executed
successfully (for any reason).
pegcount
GTT Actions – MSUs Discarded - The total number of messages discarded bythe DISCARD GTT Action.
GTTADISC0
pegcount
GTT Actions – MSUs Discarded - The total number of messages discarded bythe UDTS GTT Action.
GTTADISC1
pegcount
GTT Actions – MSUs Discarded - The total number of messages discarded bythe TCAP Error GTT Action
GTTADISC2
pegcount
GTT Actions – MSUs Duplicated - The total number of messages for whichDuplicate MSU was sent.
GTTADUP
This register shall be pegged for a message only once for which either a singleor multiple duplicate GTT Actions were performed.
pegcount
GTT Actions – MSUs Forwarded - The total number of messages forwardedby Forward GTT Action.
GTTAFWD
pegcount
The total number of messages serviced by GFLEX GTT Action.GTTASRVGFLX
pegcount
The total number of messages serviced by GPORT GTT Action.GTTASRVGPRT
pegcount
The total number of messages serviced by SMSMR GTT Action.GTTASRVSMSR
pegcount
The total number of messages serviced by SFLOG GTT Action.GTTASFLOG
pegcount
The total number of messages that successfully pass SCPVAL GTT Action.GTTAMSVTO
pegcount
The total number of messages discarded by SCPVAL GTT Action.GTTAMSVDI
pegcount
The total number of messages where validation was not applied by SCPVALGTT Action.
GTTAMSVNA
Hourly GTTAPATH ReportsThe command rept-ftp-meas:type=mtch:enttype=gttapath produces the system-wide reportand the per-path report report shown here.
System Wide Report
• Example Output File Name: mtch-gttasys_20140228_2400.csv
318E86977 Revision 1, July 2017
ReportsMeasurements
• Example Output File Format:
"CLLI","SWREL","RPTDATE","RPTIME","TZ","RPTTYPE","RPTPD","IVALDATE","IVALSTART","IVALEND","NUMENTIDS""tekelecstp","EAGLE5 46.0.0-65.6.0","2014-02-28","00:10:33","EST ","HOURLY MAINTENANCE MEASUREMENTS ON GTTACTION SYSTEM","LAST","2014-02-28","23:00:00","23:59:59",1
"STATUS","GTTADISC0","GTTADISC1","GTTADISC2","GTTADUP","GTTAFWD","GTTASET","GTTASRVGFLX","GTTASRVGPRT","GTTASRVSMSR""K",0,0,0,0,0,0,0,0,0
Assuming each data line will be: 4 char status + 9*(6 char data) + 2 = 60 chars, the typical file sizeis:
Table 183: Typical File Size: mtch-gttasys.csv
File Size=Report data+Reportheader+System
header
427 bytes=60+117+250
Per Path Report
• Example Output File Name: mtch-gttapath_20140124_2200.csv
Table 184: Entity Identification(PATH-CDSN-SCDGTA-CGSN-SCGGTA-OPSN-PKG-OPCODE-<A>/F)
DefinitionString Format
The GTT path name assigned when GTTACTpath was entered.
PATH
The called party global title translations set nameassigned when GTTACT path was entered.
CDSN
The called party start global title address(SCDGTA) assigned when GTTACT pathentered for a non-ranged entry
SCDGTA
or
The ranged called party start global title address(SCDGTA) and End global title address
SCDGTA->ECDGTA
(ECDGTA) assigned when the GTTACT pathwas entered.
The calling party global title translations setname assigned when GTTACT path was entered.
CGSN
The calling party start global title addressassigned when GTTACT path entered for anon-ranged entry
SCGGTA
or
319E86977 Revision 1, July 2017
ReportsMeasurements
DefinitionString Format
The ranged calling party start global title address(SCGGTA) and End global title address
SCDGTA->ECDGTA
(ECGGTA) assigned when the GTTACT pathwas entered.
The global title translations set name of TCAPoperation code assigned when GTTACT pathwas entered
OPSN
The ANSI/ITU TCAP package type assignedwhen GTTACT Path was entered.
PKG
TCAP operation code assigned when GTTACTpath was entered.
OPCODE
‘<A>’ stands for Application Context Name(ACN) assigned when GTTACT path entered if
<A>/F
package type is ITU TCAP. It is preceded by a“less than” sign(<) and followed by a “greaterthan” sign (>).
‘F’ stands for ANSI TCAP family field assignedif package type is ANSI TCAP when GTTACTPath was entered.
Backslash ‘/’ will not be displayed in the reportdata. Its only signifies that either <A> or F willbe displayed at a time based on the package typedisplayed in the PKG entry.
Note:
• If any entry has no value assigned then default value “#” will be displayed for it.
• These string formats allow efficient automated post processing of measurements reports; theyare not designed to be easily readable. A brief note explaining the format is included in thereport.
• Example Output File Format:
"CLLI","SWREL","RPTDATE","RPTIME","TZ","RPTTYPE","RPTPD","IVALDATE","IVALSTART","IVALEND","NUMENTIDS""tekelecstp","EAGLE5 46.0.0-65.6.0","2014-01-24","00:10:35","EST ","HOURLY MAINTENANCE MEASUREMENTS ON GTTACTION PER-PATH","LAST","2014-01-24","23:00:00","23:59:59",6
For a path containing GTA ranges, PATH-CDSN-SCDGTA-CGSN-CGGTA-OPSN-PKG-OPCODE-<A>/F = PATH-CDSN-SCDGTA->ECDGTA-CGSN-SCGGTA->ECGTA-OPSN-PKG-OPCODE-<A>/F"STATUS","PATH-CDSN-SCDGTA-CGSN-CGGTA-OPSN-PKG-OPCODE-<A>/F","GTTACTNA","GTTADISC0","GTTADISC1", "GTTADISC2","GTTADUP","GTTAFWD","GTTASRVGFLX","GTTASRVGPRT","GTTASRVSMSR""K","path1-cdlim1-12345-cglim2-123-oplim3-ituuni-<1-1-1-1-1-1-1>",0,0,0,0,0,0,0,0,0"K","gttp5-#-#-cglim2-126-opname3-bgn-10",0,0,0,0,0,0,0,0,0"K","p6-#-#-cglim6-1234-#-#-#",0,0,0,0,0,0,0,0,0
320E86977 Revision 1, July 2017
ReportsMeasurements
Assuming each data line will be: 4 char status + 169 char(PATH-CDSN-SCDGTA-CGSN-CGGTA-OPSN-PKG-OPCODE-<A>/F)+ 9*(6 char data) + 2 = 229chars, the typical file size is:
Table 185: Typical File Size: mtch-gttapath.csv
File Size=Report data(1000 paths)+Report
header+Systemheader
229576=229000+326+250
DEIR MTCH Report
The DEIR measurements specify the entity type deir and include two hourly reports:
• Per system (DEIRSYS)• Per diameter connection (DEIRCONN)
Table 117: Daily Maintenance (MTCD) and Hourly Maintenance (MTCH) DEIR Measurements lists theevents added in all DEIR measurements reports.
The retention period for the hourly reports is 24 hours.
FTP Example Command:
rept-ftp-meas:type=mtch:enttype=deir
Table 186: Daily Maintenance (MTCD) and Hourly Maintenance (MTCH) DEIR Measurements
UnitDescriptionEvent Name
Peg countTotal number ofME-Identity-Check requests(ECR) received by the EIR.
ECRRCV
Peg countTotal number of searches thatresulted in a match with a "whitelisted" IMEI.
WHITEIMEI
Peg countTotal number of searches thatresulted in a match with a "graylisted" IMEI.
GRAYIMEI
Peg countTotal number of searches thatresulted in a match with a "blacklisted" IMEI.
BLACKIMEI
Peg countTotal number of searches thatresulted in a match with a "black
BLKALIMEI
listed" IMEI, but were alloweddue to IMSI Check match.
Peg countTotal number of searches thatresulted in a match with a "black
BLKNALIMEI
321E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
listed" IMEI, and the IMSI in thedatabase did not match the IMSIin the message.
Peg countTotal number of searches thatresulted in a match with an"unknown" IMEI.
UNKNIMEI
Peg countTotal number of searches thatresulted in no match in thedatabase.
NOMTCHIMEI
StatusIndication of Data Validity:STATUS
K - indicates good dataI - indicates incompleteintervalN - indicates data not current
Example Output File Names:
mtch-deirsys_yyyymmdd_hhmm.csvHourly DEIR system total measurements report
mtch-deirconn_yyyymmdd_hhmm.csvHourly DEIR per diameter connectionmeasurements report
FTP example output file format for DEIR system total report:
"CLLI","SWREL","RPTDATE","RPTIME","TZ","RPTTYPE","RPTPD","IVALDATE","IVALSTART","IVALEND","NUMENTIDS""tekelecstp","EAGLE5 45.1.0-64.74.1","2013-06-20","10:48:59 AM","MST ","HOURLY MAINTENANCE MEASUREMENTS ON DEIR SYSTEM","SPECIFIC","2013-06-19","21:00:00","22:00:00",1
"STATUS","ECRRCV","WHITEIMEI","GRAYIMEI","BLACKIMEI","BLKALIMEI","BLKNALIMEI","UNKNIMEI","NOMTCHIMEI""K",23723,7687,0,16036,0,0,0,7687
Assuming each data line will be:
4 char status + 8 * (6 char data) + 2 = 54 chars
Typical file size is:
Table 187: Typical File Size: mtch-deirsys.csv
File Size=Report dataReportheader
Systemheader
417 bytes=54+104+250
FTP example output file format for per diameter connection report:
"CLLI","SWREL","RPTDATE","RPTIME","TZ","RPTTYPE","RPTPD","IVALDATE","IVALSTART","IVALEND","NUMENTIDS""tekelecstp","EAGLE5 45.1.0-64.74.1","2013-06-20","10:38:59 AM","MST ","HOURLY
322E86977 Revision 1, July 2017
ReportsMeasurements
MAINTENANCE MEASUREMENTS ON DEIR PER-CONNECTION","SPECIFIC","2013-06-19","21:00:00","22:00:00",5
"STATUS","DCNAME","ECRRCV","WHITEIMEI","GRAYIMEI","BLACKIMEI","BLKALIMEI","BLKNALIMEI","UNKNIMEI","NOMTCHIMEI""K","d1",100,100,0,0,0,0,0,0"K","d2",768,768,0,0,0,0,0,768"K","d3",0,0,0,0,0,0,0,0"K","d4",500,0,0,500,0,0,0,0"K","d5",1000,0,1000,0,0,0,0,0
Assuming each data line will be:
4 char status + 18 char (Diameter connection) + 8 * (6 char data) + 2 = 72 chars
Typical file size is:
Table 188: Typical File Size: mtch-deirconn.csv
File Size=
Report data(512
connections)
Reportheader
Systemheader
37227 bytes=36864 bytes+113+250
ENUM MTCH Report
The ENUM measurements specify the entity type enum and include four hourly reports:
• Per system (ENUMSYS)
Table 189: Daily Maintenance (MTCD) and Hourly Maintenance (MTCH) ENUM System LevelMeasurements lists the events added per system.
• Per card (ENUMCARD)
Table 190: Daily Maintenance (MTCD) and Hourly Maintenance (MTCH) ENUM Card Level Measurementslists the events added for each card.
• Per entity (ENUMENT)
Table 191: Daily Maintenance (MTCD) and Hourly Maintenance (MTCH) ENUM Entity LevelMeasurements lists the events added for each entity ID in the entity ID table or each DN block inthe DN block profile table.
• Per ACL (ENUMACL)
Table 192: Daily Maintenance (MTCD) and Hourly Maintenance (MTCH) ENUM ACL Level Measurementslists the events added for each ACL entry in the ACL table.
The retention period is 24 hours.
FTP Example Command:
rept-ftp-meas:type=mtch:enttype=enum
323E86977 Revision 1, July 2017
ReportsMeasurements
Table 189: Daily Maintenance (MTCD) and Hourly Maintenance (MTCH) ENUM System LevelMeasurements
UnitDescriptionEvent Name
Peg countTotal number of ENUM queriesreceived
ENUMQRYRX
Peg countTotal number of NAPTR queriesreceived
ENUMNAPTRRX
Peg countTotal number of NS queriesreceived
ENUMNSRX
Peg countTotal number of CNAME queriesreceived
ENUMCNAMERX
Peg countTotal number of ENUM queriesrejected by ENUM server
ENUMQRYRJTD
Peg countTotal number of ENUM queriesdiscarded due to congestion
ENUMCNGDISC
Peg countTotal number of ENUM queriesdiscarded due to ACL validationfailure
ENUMACLDISC
Peg countTotal number of successfulENUM responses sent
ENUMTXRC0
Peg countTotal number of ENUM errorresponses sent due to ENUMQuery format error
ENUMTXRC1
Peg countTotal number of ENUM errorresponses sent due to ENUMServer failure
ENUMTXRC2
Peg countTotal number of ENUM errorresponses sent due tonon-existent domain error
ENUMTXRC3
Peg countTotal number of ENUM errorresponses sent due to notimplemented error
ENUMTXRC4
Peg countTotal number of ENUM errorresponses sent due to refusal byENUM server
ENUMTXRC5
Peg countTotal number ENUM responsessent with default ENUM profile
ENUMTXDEFPR
StatusIndication of Data Validity:STATUS
K indicates good dataI indicates incompleteinterval
324E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
N indicates data not current
Table 190: Daily Maintenance (MTCD) and Hourly Maintenance (MTCH) ENUM Card LevelMeasurements
UnitDescriptionEvent Name
Peg countTotal number of ENUM queriesreceived
ENUMCQRYRX
Peg countTotal number of NAPTR queriesreceived
ENUMCNAPTRX
Peg countTotal number of NS queriesreceived
ENUMCNSRX
Peg countTotal number of CNAME queriesreceived
ENUMCCNAMRX
Peg countTotal number of ENUM queriesrejected by ENUM server
ENUMCQRRJTD
Peg countTotal number of ENUM queriesdiscarded due to congestion
ENUMCCNGDSC
Peg countTotal number of ENUM queriesdiscarded due to ACL validationfailure
ENUMCACLDSC
Peg countTotal number of successfulENUM responses sent
ENUMCTXRC0
Peg countTotal number of ENUM errorresponses sent due to ENUMquery format error
ENUMCTXRC1
Peg countTotal number of ENUM errorresponses sent due to ENUMserver failure
ENUMCTXRC2
Peg countTotal number of ENUM errorresponses sent due tonon-existent domain error
ENUMCTXRC3
Peg countTotal number of ENUM errorresponses sent due to notimplemented error
ENUMCTXRC4
Peg countTotal number of ENUM errorresponses sent due to refusal byENUM server
ENUMCTXRC5
Peg countTotal number ENUM responsessent with default ENUM profile
ENUMCTXDEFP
325E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
StatusIndication of Data Validity:STATUS
K indicates good dataI indicates incompleteintervalN indicates data not current
Table 191: Daily Maintenance (MTCD) and Hourly Maintenance (MTCH) ENUM Entity LevelMeasurements
UnitDescriptionEvent Name
Peg countTotal number of ENUM queriesreceived or ENUM responsessent per entity
ENUMENTMSGS
StatusIndication of Data Validity:STATUS
K indicates good dataI indicates incompleteintervalN indicates data not current
Table 192: Daily Maintenance (MTCD) and Hourly Maintenance (MTCH) ENUM ACL LevelMeasurements
UnitDescriptionEvent Name
Peg countTotal number of ENUM queriesreceived
ENUMACLQRCV
Peg countTotal number of ENUM queriesrejected by ENUM server
ENUMACLQRJD
Peg countTotal number of successfulENUM responses sent
ENUMACLRC0
Peg countTotal number of ENUM errorresponses sent due to ENUMquery format error
ENUMACLRC1
Peg countTotal number of ENUM errorresponses sent due to ENUMserver failure
ENUMACLRC2
Peg countTotal number of ENUM errorresponses sent due tonon-existent domain error
ENUMACLRC3
Peg countTotal number of ENUM errorresponses sent due to notimplemented error
ENUMACLRC4
326E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
Peg countTotal number of ENUM errorresponses sent due to refusal byENUM server
ENUMACLRC5
StatusIndication of Data Validity:STATUS
K indicates good dataI indicates incompleteintervalN indicates data not current
Example Output File Names:
mtch-enumsys_yyyymmdd_hhmm.csvHourly ENUM system totals measurements report
mtch-enumcard_yyyymmdd_hhmm.csvHourly ENUM per card measurements report
mtch-enument_yyyymmdd_hhmm.csvHourly ENUM per entity measurements report
mtch-enumacl_yyyymmdd_hhmm.csvHourly ENUM per acl measurements report
FTP example output file format for system total report:
"CLLI","SWREL","RPTDATE","RPTIME","TZ","RPTTYPE","RPTPD","IVALDATE","IVALSTART","IVALEND","NUMENTIDS""tekelecstp","UNKNOWN ??.?.?-65.27.0","2014-08-22","22:01:32","MST ","HOURLY MAINTENANCE MEASUREMENTS ON ENUM SYSTEM","LAST","2014-08-22","21:00:00","22:00:00",1
"STATUS","ENUMQRYRX","ENUMNAPTRRX","ENUMNSRX","ENUMCNAMERX","ENUMQRYRJTD","ENUMCNGDISC","ENUMACLDISC","ENUMTXRC0","ENUMTXRC1","ENUMTXRC2","ENUMTXRC3","ENUMTXRC4","ENUMTXRC5","ENUMTXDEFPR""K",2134,0,2134,0,0,0,0,2134,0,0,0,0,0,0
Assuming each data line will be:
4 char status + 14 * (6 char data) + 2 = 90 chars
Typical file size is:
Table 193: Typical File Size: mtch-enumsys.csv
File Size=Report dataReportheader
Systemheader
529 bytes=90 bytes+189+250
FTP example output file format for per card report:
"CLLI","SWREL","RPTDATE","RPTIME","TZ","RPTTYPE","RPTPD","IVALDATE","IVALSTART","IVALEND","NUMENTIDS""tekelecstp","UNKNOWN ??.?.?-65.27.0","2014-08-22","22:01:35","MST ","HOURLY MAINTENANCE MEASUREMENTS ON ENUM PER-CARD","LAST","2014-08-22","21:00:00","22:00:00",2
"STATUS","LOC","ENUMCQRYRX","ENUMCNAPTRX","ENUMCNSRX","ENUMCCNAMRX","ENUMCQRRJTD","ENUMCCNGDSC","ENUMCACLDSC","ENUMCTXRC0","ENUMCTXRC1","ENUMCTXRC2","ENUMCTXRC3","ENUMCTXRC4","ENUMCTXRC5","ENUMCTXDEFP"
327E86977 Revision 1, July 2017
ReportsMeasurements
"K","1101",2134,0,2134,0,0,0,0,2134,0,0,0,0,0,0"K","1105",0,0,0,0,0,0,0,0,0,0,0,0,0,0
Assuming each data line will be:
4 char status + 7 char (card) + 14 * (6 char data) + 2 = 95 chars
Typical file size is:
Table 194: Typical File Size: mtch-enumcard.csv
File Size=Report data(250 card)
Reportheader
Systemheader
24203 bytes=23750 bytes+203+250
FTP example output file format for per entity report:
"CLLI","SWREL","RPTDATE","RPTIME","TZ","RPTTYPE","RPTPD","IVALDATE","IVALSTART","IVALEND","NUMENTIDS""tekelecstp","UNKNOWN ??.?.?-65.27.0","2014-08-22","22:01:33","MST ","HOURLY MAINTENANCE MEASUREMENTS ON ENUM PER-ENTITY","LAST","2014-08-22","21:00:00","22:00:00",2
"STATUS","ENTITY ID","SDN","EDN","ENUMENTMSGS""K","123456789012345","","",0"K","123456789123456","","",2134
Assuming each data line will be:
4 char status + 3* (18 char Entity ID/SDN/EDN) + (6 char data) + 2 = 66 chars
Typical file size is:
Table 195: Typical File Size: mtch-enument.csv
File Size=
Report data(1024
entries)
Reportheader
Systemheader
67882 bytes=67584 bytes+48+250
FTP example output file format for per ACL report:
"CLLI","SWREL","RPTDATE","RPTIME","TZ","RPTTYPE","RPTPD","IVALDATE","IVALSTART","IVALEND","NUMENTIDS""tekelecstp","UNKNOWN ??.?.?-65.27.0","2014-08-22","22:01:34","MST ","HOURLY MAINTENANCE MEASUREMENTS ON ENUM PER-ACL","LAST","2014-08-22","21:00:00","22:00:00",1
"STATUS","IP ADDRESS","ENUMACLQRCV","ENUMACLQRJD","ENUMACLRC0","ENUMACLRC1","ENUMACLRC2","ENUMACLRC3","ENUMACLRC4","ENUMACLRC5""K","10.*.*.*",2134,0,2134,0,0,0,0,0
Assuming each data line will be:
4 char status + 18 char (IP Address) + 8 * (6 char data) + 2 = 72 chars
328E86977 Revision 1, July 2017
ReportsMeasurements
Typical file size is:
Table 196: Typical File Size: mtch-enumacl.csv
File Size=Report data(100 entries)
Reportheader
Systemheader
7579 bytes=7200 bytes+129+250
Gateway Measurements (GTWY)
The GTWY measurement report collects and reports gateway-related data from the STP. The gatewayrelated data collected for this report is the network management and global title translation load onthe EAGLE, and the source of this load. The level and source of pass through TCAP traffic is alsocollected. The MTP cards measure this data which is reported when requested.
Entity Types:STP, ORIGNI, ORIGNINC, LNKSET, LSDESTNI, LSORIGINI, and LSONISMT
Accumulation Interval: 30 minutes
Optional Accumulation Interval: Every 15 minutes
STP Retention Period: 24 hours
Reporting Mode: Scheduled, On-demand
Accessible Collection Period: Last, Specific
STP GTWY Report
STP GTYW reports are an aggregation of the counters from OAM, SCCP, and LIM cards. If any of thecards are ISOLATED/OOS during a measurement interval, the report is marked I. The report is markedK only when the OAM, SCCP, and LIM cards are IS-NR throughout the entire measurement interval.
Example Commands:
• UI
rept-meas:type=gtwy:enttype=stp
• FTP
rept-ftp-meas:type=gtwy:enttype=stp
Measurement Events
Table 197: Gateway STP Measurements
UnitDescriptionEvent Name
peg countNumber of Global TitleTranslations (GTTs) performed
GTTPFDIC
329E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
on messages received from aninterconnecting network.
peg countNumber of MSUs discarded dueto screening failure.
MSUDSCRD
peg countNumber of MSUs rejected dueto screening - disallowed OPC.
MSURJOPC
peg countNumber of MSUs rejected dueto screening - disallowed DPC.
MSURJDPC
peg countNumber of MSUs rejected dueto screening - invalid serviceinformation octet (SIO).
MSURJSIO
peg countNumber of MSUs rejected dueto screening - invalid callingparty address.
MSURJCPA
peg countNumber of subsystem prohibited(SSP) and subsystem allowed
MSURJAPC
(SSA) MSUs rejected due toscreening - invalid affected pointcode.
peg countNumber of subsystem status test(SST) MSUs rejected due to
MSURJPCS
screening - invalid affected pointcode and SSN.
peg countNumber of MTP-NM MSUsrejected due to screening -invalid affected destination field.
MSURJDST
peg countNumber of SCCP MSUs rejecteddue to screening - invalidtranslation type.
MSURJTT
peg countNumber of SCCP MSUs rejecteddue to screening - disallowed
MSURJDSN
DPC/SSN in called partyaddress.
peg countNumber of transfer controlled(TFC) MSUs rejected due to
MSURJTFC
screening - invalid affecteddestination field.
peg countNumber of signaling routesettest (SRST) MSUs rejected due to
MSURJSRT
330E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
screening - invalid affecteddestination field.
statusIndication of Data Validity:STATUS
K indicates good dataI indicates incompleteintervalN indicates data not current
peg countNumber of translation typemapping translations performed.
TTMAPPF
For example, a mapped SS7message translation type wasfound for the existing SS7message translation type.
UI Reports
UI Example Output:
tekelecstp 03-12-19 12:51:24 EST EAGLE 34.0.0 TYPE OF REPORT: GATEWAY MEASUREMENTS ON STP REPORT PERIOD: LAST REPORT INTERVAL: 03-12-19, 12:00:00 THROUGH 12:29:59
STP-GTWY MEASUREMENTS
These measurements are from 03-12-19, 12:00:00 through 12:29:59. TTMAPPF = 0, GTTPFDIC = 0, MSUDSCRD = 0, MSURJOPC = 0, MSURJDPC = 0, MSURJSIO = 0, MSURJCPA = 0, MSURJAPC = 0, MSURJPCS = 0, MSURJDST = 0, MSURJTT = 0, MSURJDSN = 0, MSURJTFC = 0, MSURJSRT = 0
; tekelecstp 03-12-19 12:51:26 EST EAGLE 34.0.0 END OF ON-DEMAND STP-GTWY MEASUREMENT REPORT;
FTP Reports
FTP Example Output File Name: gtwy-stp_19990117_1530.csv
FTP Example Output File Format:
"CLLI","SWREL","RPTDATE","RPTIME","TZ","RPTTYPE","RPTPD","IVALDATE","IVALSTART","IVALEND","NUMENTIDS"<cr><lf>"tekelecstp","34.0.0-39.1.0","1999-01-17","15:51:37","EST","GATEWAY MEASUREMENTS ON STP","LAST","1999-01-17","15:00:00","15:30:00",1<cr><lf><cr><lf>"STATUS","TTMAPPF","GTTPFDIC","MSUDSCRD","MSURJOPC","MSURJDPC","MSURJSIO", "MSURJCPA","MSURJAPC","MSURJPCS","MSURJDST","MSURJTT","MSURJDSN","MSURJTFC", "MSURJSRT"<cr><lf>"K",0,0,0,0,0,0,0,0,0,0,0,0,0,0<cr><lf>
331E86977 Revision 1, July 2017
ReportsMeasurements
Typical file size is:
Table 198: Typical File Size: gtwy-stp.csv
File Size=Report data+Reportheader+System
header
504 bytes=90+164+250
ORIGNI GTWY Report
Command Examples
• UI
rept-meas:type=gtwy:enttype=origni:ni=200
• FTP
rept-ftp-meas:type=gtwy:enttype=origni
Measurement Events
Table 199: Gateway ORIGNI Measurements
UnitDescriptionEvent Name
peg countNumber of global titletranslations (GTTs) performed -
GTTPFDPC
result is a DPC of aninterconnecting network.
peg countNumber of GTTs unable toperform on messages received
GTTUNTT
from an interconnecting network- no translation table for thetranslation type.
peg countNumber of GTTs performed onmessages received from aninterconnecting network.
GTTPFDIC
peg countNumber of GTTs unable toperform on messages received
GTTUNADR
from an interconnecting network- no translation for this address.
statusIndication of Data Validity:STATUS
K indicates good dataI indicates incompleteinterval
332E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
N indicates data not current
UI Reports
UI Example Output:
tekelecstp 03-12-19 12:31:12 EST EAGLE 34.0.0 TYPE OF REPORT: GATEWAY MEASUREMENTS ON ORIGNI REPORT PERIOD: LAST REPORT INTERVAL: 03-12-19, 12:00:00 THROUGH 12:29:59
ORIGNI-GTWY MEASUREMENTS: NI: 5
These measurements are from 03-12-19, 12:00:00 through 12:29:59. GTTPFDPC = 0, GTTUNTT = 0, GTTPFDIC = 834033, GTTUNADR = 834034
; tekelecstp 03-12-19 12:31:13 EST EAGLE 34.0.0 END OF ON-DEMAND ORIGNI-GTWY MEASUREMENT REPORT;
FTP Reports
FTP Example Output File Name: gtwy-origni_19990117_1530.csv
FTP Example Output File Format:
"CLLI","SWREL","RPTDATE","RPTIME","TZ","RPTTYPE","RPTPD","IVALDATE","IVALSTART","IVALEND","NUMENTIDS"<cr><lf>"tekelecstp","34.0.0-39.1.0","1999-01-17","15:51:37","EST","GATEWAY MEASUREMENTS ON ORIGNI","LAST","1999-01-17","15:00:00","15:30:00",100<cr><lf><cr><lf>"STATUS","NI","GTTPFDPC","GTTUNTT","GTTPFDIC","GTTUNADR"<cr><lf>"K",100,0,0,834033,834034<cr><lf>. . . . ."K",200,0,0,834033,834034<cr><lf>
Assuming each data line will be:
4 char status + 4 char NI + 4*(6 char data) + 2 = 34 chars
For a report of 100 NIs, typical file size is:
Table 200: Typical File Size: gtwy-origni.csv
File Size=Report data+Reportheader+System
header
3709 bytes=3400+59+250
333E86977 Revision 1, July 2017
ReportsMeasurements
ORIGNINC GTWY Report
Command Examples
• UI
rept-meas:type=gtwy:enttype=origninc:ni=4:nc=200
• FTP
rept-ftp-meas:type=gtwy:enttype=origninc
Measurement Events
Table 201: Gateway ORIGNINC Measurements
UnitDescriptionEvent Name
peg countNumber of global titletranslations (GTTs) performed -
GTTPFDPC
result is a DPC of aninterconnecting network.
peg countNumber of GTTs unable toperform on messages received
GTTUNTT
from an interconnecting network- no translation table for thetranslation type.
peg countNumber of GTTs performed onmessages received from aninterconnecting network.
GTTPFDIC
peg countNumber of GTTs unable toperform on messages received
GTTUNADR
from an interconnecting network- no translation for this address.
statusIndication of Data Validity:STATUS
K indicates good dataI indicates incompleteintervalN indicates data not current
UI Reports
UI Example Output:
tekelecstp 03-12-19 12:31:37 EST EAGLE 34.0.0 TYPE OF REPORT: GATEWAY MEASUREMENTS ON ORIGNINC REPORT PERIOD: LAST
334E86977 Revision 1, July 2017
ReportsMeasurements
REPORT INTERVAL: 03-12-19, 12:00:00 THROUGH 12:29:59
ORIGNINC-GTWY MEASUREMENTS: NI: 5, NC: 5
These measurements are from 03-12-19, 12:00:00 through 12:29:59. GTTPFDPC = 0, GTTUNTT = 0, GTTPFDIC = 834033, GTTUNADR = 834034
; tekelecstp 03-12-19 12:31:38 EST EAGLE 34.0.0 END OF ON-DEMAND ORIGNINC-GTWY MEASUREMENT REPORT;
FTP Reports
FTP Example Output File Name: gtwy-origninc_19990117_1530.csv
FTP Example Output File Format:
"CLLI","SWREL","RPTDATE","RPTIME","TZ","RPTTYPE","RPTPD","IVALDATE","IVALSTART","IVALEND","NUMENTIDS"<cr><lf>"tekelecstp","34.0.0-39.1.0","1999-01-17","15:51:37","EST","GATEWAY MEASUREMENTS ON ORIGNINC","LAST","1999-01-17","15:00:00","15:30:00",100<cr><lf><cr><lf>"STATUS","NI","NC","GTTPFDPC","GTTUNTT","GTTPFDIC","GTTUNADR"<cr><lf>"K",4,200,0,0,834033,834034<cr><lf>. . . . ."K",25,200,0,0,834033,834034<cr><lf>
Assuming each data line will be:
4 char status + 4 char NI + 4 char NC + 4*(6 char data) + 2 = 38 chars
For a report of 100 NI/NCs, the typical file size is:
Table 202: Typical File Size: gtwy-origninc.csv
File Size=Report data+Reportheader+System
header
4114 bytes=3800+64+250
LNKSET GTWY Report
Note: The determination of which linksets are included in this report is controlled by the state of thegtwylsfltr field in the measurement control table. By default, only gateway linksets are included. Thiscan be changed with the chg-meas:gtwylsfltr={ both | stp | seas | none } command.See the Commands User's Guide for details on using this command.
Command Examples
• UI
rept-meas:type=gtwy:enttype=lnkset:lsn=ls1201a
335E86977 Revision 1, July 2017
ReportsMeasurements
• FTP
rept-ftp-meas:type=gtwy:enttype=lnkset
Measurement Events
Table 203: Gateway Linkset Measurements
UnitDescriptionEvent Name
peg countThe number of transferprohibited (TFP) and transfer
TFPTRAN
cluster prohibited (TCP) MSUstransmitted.
peg countThe number of TFP and TCPMSUs received.
TFPRECD
peg countThe number of transfer restricted(TFR) and transfer cluster
TFRTRAN
restricted (TCR) MSUstransmitted.
peg countThe number of TFR and TCRMSUs received.
TFRRECD
peg countThe number of transfer allowed(TFA) and transfer cluster
TFATRAN
allowed (TCA) MSUstransmitted.
peg countThe number of TFA and TCAMSUs received.
TFARECD
peg countThe number of signaling routesettest (SRST) and cluster signaling
SRSTTRAN
routeset test (CSRST) MSUstransmitted.
peg countThe number of SRST and CSRSTMSUs received.
SRSTRECD
peg countThe number of signaling routesetcongestion test (SRSCT) MSUstransmitted.
SRSCTRAN
peg countThe number of SRSCT MSUsreceived.
SRSCTRCD
statusIndication of Data Validity:STATUS
K indicates good data
336E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
I indicates incompleteintervalN indicates data not current
peg countThe number of testing andmaintenance (T&M) MSUsreceived.
TSTMTRCD
peg countThe number of subsystemprohibited (SSP) MSUstransmitted.
SSPTRAN
peg countThe number of SSP MSUsreceived.
SSPRECD
peg countThe number of subsystemallowed (SSA) MSUstransmitted.
SSATRAN
peg countThe number of SSA MSUsreceived.
SSARECD
peg countThe number of subsystem statustest (SST) MSUs transmitted.
SSTTRAN
peg countThe number of SST MSUsreceived.
SSTRECD
peg countThe number of signaling linktests received.
SLTRECD
statusIndication of Data ValiditySTATUS
K – indicates good data
I– indicates incomplete interval;
N – indicates data not current.
Note: Output is identical for all linkset types.
UI Reports
• Example of rept-meas:type=gtwy:enttype=lnkset:lsn=xxxx
tekelecstp 12-02-21 02:00:53 EST EAGLE5 44.0.0 TYPE OF REPORT: GATEWAY MEASUREMENTS ON LNKSET REPORT PERIOD: LAST REPORT INTERVAL: 12-02-21, 01:30:00 THROUGH 01:59:59
LNKSET-GTWY MEASUREMENTS: gtwy (MTP2)
These measurements are from 12-02-21, 01:30:00 through 01:59:59. TFPTRAN = 0, TFPRECD = 0, TFRTRAN = 0,
337E86977 Revision 1, July 2017
ReportsMeasurements
TFRRECD = 0, TFATRAN = 0, TFARECD = 0, SRSTTRAN = 0, SRSTRECD = 0, SLTRECD = 0, SRSCTRAN = 0, SRSCTRCD = 0, TSTMTRCD = 0, SSPTRAN = 0, SSPRECD = 0, SSATRAN = 0, SSARECD = 0, SSTTRAN = 0, SSTRECD = 0
;
tekelecstp 12-02-21 02:30:52 EST EAGLE5 44.0.0 TYPE OF REPORT: GATEWAY MEASUREMENTS ON LNKSET REPORT PERIOD: LAST REPORT INTERVAL: 12-02-21, 02:00:00 THROUGH 02:29:59
LNKSET-GTWY MEASUREMENTS: hcmimt1 (MTP2-UNCH)
These measurements are from 12-02-21, 02:00:00 through 02:29:59. TFPTRAN = 0, TFPRECD = 0, TFRTRAN = 0, TFRRECD = 0, TFATRAN = 0, TFARECD = 0, SRSTTRAN = 0, SRSTRECD = 0, SLTRECD = 0, SRSCTRAN = 0, SRSCTRCD = 0, TSTMTRCD = 0, SSPTRAN = 0, SSPRECD = 0, SSATRAN = 0, SSARECD = 0, SSTTRAN = 0, SSTRECD = 0
;
FTP Reports
FTP Example Output File Name: gtwy-lnkset_20101005_2030.csv
FTP Example Output File Format:
"CLLI","SWREL","RPTDATE","RPTIME","TZ","RPTTYPE","RPTPD","IVALDATE","IVALSTART","IVALEND","NUMENTIDS"<cr><lf>"tekelecstp","EAGLE5 44.0.0-64.23.0","2012-02-21","02:32:03","EST ","GATEWAY MEASUREMENTS ON LNKSET","LAST","2012-02-21","02:00:00","02:30:00",2<cr><lf><cr><lf>"STATUS","LSN","LNKTYPE","TFPTRAN","TFPRECD","TFRTRAN","TFRRECD","TFATRAN","TFARECD","SRSTTRAN","SRSTRECD","SLTRECD","SRSCTRAN","SRSCTRCD","TSTMTRCD","SSPTRAN","SSPRECD","SSATRAN","SSARECD","SSTTRAN","SSTRECD"<cr><lf>"K","hcmimt1","MTP2-UNCH",0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0<cr><lf>"K","gtwy","MTP2",0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0<cr><lf>
Assuming each data line will be:
4 char status + 13 char LSN + 12 char LNKTYPE + 18*(6 char data) + 2 = 139 chars
Table 204: Typical File Size: gtwy-lnkset.csv
File Size=Report data+Reportheader+System
header
69,962 bytes=69,500+212+250
338E86977 Revision 1, July 2017
ReportsMeasurements
LSDESTNI GTWY Report
Note:
The determination of which linksets are included in this report is controlled by the state of the gtwylsfltrfield in the measurement control table. By default, only gateway linksets are included. This can bechanged with the chg-meas:gtwylsfltr={ both | stp | seas | none } command. Seethe Commands User's Guide for details on using this command. The NI parameter is not part of theoutput for ITU GTWY linksets.
Command Examples
• UI
rept-meas:type=gtwy:enttype=lsdestni:lsn=ls1201:ni=5
• FTP
rept-ftp-meas:type=gtwy:enttype=lsdestni
Measurement Events
Table 205: Gateway LSDESTNI Measurements
UnitDescriptionEvent Name
peg countThe number of MSUs receivedfrom another network - notaddressed to the BCC network.
MSURCVNA
octetsThe number of MSU octetsreceived from another network
OCTRCVNA
- not addressed to the BCCnetwork.
peg countThe number of MSUstransmitted - addressed to a
MSUTRNNA
network other than the adjacentreceiving network.
octetsThe number of MSU octetstransmitted - addressed to a
OCTTRNNA
network other than the adjacentreceiving network.
statusIndication of Data Validity:STATUS
K indicates good dataI indicates incompleteintervalN indicates data not current
339E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
peg countThe number transfer controlled(TFC) MSUs transmitted -originated by the gateway STP.
TFCGTRAN
UI Reports
UI Example Output:
tekelecstp 03-12-19 12:30:16 EST EAGLE 34.0.0 TYPE OF REPORT: GATEWAY MEASUREMENTS ON LSDESTNI REPORT PERIOD: LAST REPORT INTERVAL: 03-12-19, 12:00:00 THROUGH 12:29:59
LSDESTNI-GTWY MEASUREMENTS: LSN: ls1201, NI: 5
These measurements are from 03-12-19, 12:00:00 through 12:29:59. MSURCVNA = 5040000, OCTRCVNA = 201600K, MSUTRNNA = 834033, OCTTRNNA = 14757021, TFCGTRAN = 0
; tekelecstp 03-12-19 12:30:18 EST EAGLE 34.0.0 END OF ON-DEMAND LSDESTNI-GTWY MEASUREMENT REPORT;
FTP Reports
FTP Example Output File Name: gtwy-lsdestni_19990117_1530.csv
FTP Example Output File Format:
"CLLI","SWREL","RPTDATE","RPTIME","TZ","RPTTYPE","RPTPD","IVALDATE","IVALSTART","IVALEND","NUMENTIDS"<cr><lf>"tekelecstp","34.0.0-39.1.0","1999-01-17","15:51:37","EST","GATEWAY MEASUREMENTS ON LSDESTNI","LAST","1999-01-17","15:00:00","15:30:00",400<cr><lf><cr><lf>"STATUS","LSN","LSTYPE","NI","MSURCVNA","OCTRCVNA","MSUTRNNA","OCTTRNNA","TFCGTRAN"<cr><lf>"K","ls1201","ANSI",5,5040000,201600K,834033,14757021,0<cr><lf>. . . . ."K","lsitu","ITU",,5040000,201600K,834033,14757021,0<cr><lf>
Assuming each data line will be:
4 char status + 8 char LSN + 6 char LSTYPE + 4 char NI + 5*(6 char data) + 2 = 54 chars
For a report of 400 LSDESTNIs, the typical file size is:
Table 206: Typical File Size: gtwy-lsdestni.csv
File Size=Report data+Reportheader+System
header
21936 bytes=21600+86+250
340E86977 Revision 1, July 2017
ReportsMeasurements
LSORIGNI GTWY Report
Note:
The determination of which linksets are included in this report is not controlled by the state of thegtwylsfltr field in the measurement control table. LSONISMT register MSUISPMT counts are rolledinto the MSUDSCRD register. It is possible to have counts for MSUDSCRD, but no counts for anyother registers in this report due to the MSUISPMT register count in the LSONISMT report.
The NI parameter is not part of the output for ITU GTWY linksets.
The NI parameter is not part of the output for ITU GTWY linksets.
Command Examples
• UI
rept-meas:type=gtwy:enttype=lsorigni:lsn=ls1201:ni=12
• FTP
rept-ftp-meas:type=gtwy:enttype=lsorigni
Measurement Events
Table 207: Gateway LSORGINI Measurements
UnitDescriptionEvent Name
peg countThe number of transfercontrolled (TFC) MSUs received
TFCGRECD
peg countThe number of MSUs rejecteddue to screening - disallowedOPC.
MSURJOPC
peg countThe number of MSUs rejecteddue to screening - disallowedDPC.
MSURJDPC
peg countThe number of MSUs rejecteddue to screening - invalid callingparty address.
MSURJCPA
peg countThe number of subsystemprohibited (SSP) and subsystem
MSURJAPC
allowed (SSA) MSUs rejecteddue to screening - invalidaffected point code.
peg countThe number of subsystem statustest (SST) MSUs rejected due to
MSURJPCS
screening - invalid affected pointcode and SSN.
341E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
peg countNumber of MSUs discarded dueto screening H0H1
MSURJHC
peg countThe number of TFC MSUsrejected due to screening -invalid affected destination field.
MSURJTFC
peg countThe number of signaling routesettest (SRST) MSUs rejected due to
MSURJSRT
screening - invalid affecteddestination field.
peg countThe number of MSUs rejecteddue to screening failure.
MSUDSCRD
peg countThe number of MSUs rejecteddue to screening - invalid serviceinformation octet (SIO).
MSURJSIO
peg countThe number of MTP-NM MSUsrejected due to screening -invalid affected destination field.
MSURJDST
peg countThe number of SCCP MSUsrejected due to screening -invalid translation type.
MSURJTT
peg countThe number of SCCP MSUsrejected due to screening -disallowed DPC/SSN.
MSURJDSN
statusIndication of Data Validity:STATUS
K indicates good dataI indicates incompleteintervalN indicates data not current
peg countThe number of transfercontrolled (TFC) MSUs received
TFCGRECD
UI Reports
UI Example Output:
tekelecstp 03-12-19 12:29:26 EST EAGLE 34.0.0 TYPE OF REPORT: GATEWAY MEASUREMENTS ON LSORIGNI REPORT PERIOD: LAST REPORT INTERVAL: 03-12-19, 11:30:00 THROUGH 11:59:59
LSORIGNI-GTWY MEASUREMENTS: LSN: ls1201, NI: 5
342E86977 Revision 1, July 2017
ReportsMeasurements
These measurements are from 03-12-19, 11:30:00 through 11:59:59. TFCRECD = 0, MSURJOPC = 834033, MSURJDPC = 834034, MSURJCPA = 14757021, MSURJAPC = 14757039, MSURJPCS = 0, MSURJTFC = 0, MSURJSRT = 0, MSUDSCRD = 0, MSURJSIO = 0, MSURJDST = 0, MSURJTT = 0, MSURJDSN = 0
; tekelecstp 03-12-19 12:29:27 EST EAGLE 34.0.0 END OF ON-DEMAND LSORIGNI-GTWY MEASUREMENT REPORT
FTP Reports
FTP Example Output File Name: gtwy-lsorigni_19990117_1530.csv
"CLLI","SWREL","RPTDATE","RPTIME","TZ","RPTTYPE","RPTPD","IVALDATE","IVALSTART","IVALEND","NUMENTIDS"<cr><lf>"tekelecstp","34.0.0-39.1.0","1999-01-17","15:51:37","EST","GATEWAY MEASUREMENTS ON LSORIGNI","LAST","1999-01-17","15:00:00","15:30:00",400<cr><lf><cr><lf>"STATUS","LSN","LSTYPE","NI","TFCGRECD","MSURJOPC","MSURJDPC","MSURJCPA","MSURJAPC","MSURJPCS","MSURJHC","MSURJTFC","MSURJSRT","MSUDSCRD","MSURJSIO","MSURJDST","MSURJTT","MSURJDSN"<cr><lf>"K","ls1201","ANSI",5,0,834033,834034,14757021,14757039,0,0,0,0,0,0,0,0,0<cr><lf>. . . . ."K","lsitu","ITU",,0,834033,834034,14757021,14757039,0,0,0,0,0,0,0,0,0<cr><lf>
Assuming each data line will be:
4 char status + 8 char LSN + 6 char LSTYPE + 4 char NI + 14*(6 char data) + 2 = 108 chars
For a report of 400 LSORIGNIs, typical file size is:
Table 208: Typical File Size: gtwy-lsorigni.csv
File Size=Report data+Reportheader+System
header
43623 bytes=43200+173+250
LSONISMT GTWY Report
Note:
The determination of which linksets are included in this report is not controlled by the state of thegtwylsfltr field in the measurement control table. MSUISPMT counts are rolled into the MSUDSCRDregister of the LSORIGNI and STP reports.
The NI parameter is not part of the output for ITU GTWY linksets.
The NI parameter is not part of the output for ITU GTWY linksets.
Command Examples
• UI
rept-meas:type=gtwy:enttype=lsonismt:lsn=ls1201a:ni=43
343E86977 Revision 1, July 2017
ReportsMeasurements
• FTP
rept-ftp-meas:type=gtwy:enttype=lsonismt
Measurement Events
Table 209: Gateway LSONISMT Measurements
UnitDescriptionEvent Name
peg countNumber of ISDNUP MSUsrejected due to screening --invalid ISUP message type
MSUISPMT
UI Reports
UI Example Output:
tekelecstp 03-12-19 12:29:26 EST EAGLE 34.0.0 TYPE OF REPORT: GATEWAY MEASUREMENTS ON LSONISMT REPORT PERIOD: LAST REPORT INTERVAL: 02-12-19, 12:00:00 THROUGH 12:29:59
LSONISMT-GTWY MEASUREMENTS: LSN: ls1201a, NI: 43, ISMT: 6
These measurements are from 02-12-19, 12:00:00 through 12:29:59. MSUISPMT = 45397
; LSONISMT-GTWY MEASUREMENTS: LSN: ls1201a, NI: 43, ISMT: 7
These measurements are from 02-12-19, 12:00:00 through 12:29:59. MSUISPMT = 61423; tekelecstp 02-12-19 12:41:21 EST EAGLE 34.0.0 END OF ON-DEMAND LSONISMT-GTWY MEASUREMENT REPORT;
FTP Reports
FTP Example Output File Name: gtwy-lsonismt_20021217_1530.csv
"CLLI","SWREL","RPTDATE","RPTIME","TZ","RPTTYPE","RPTPD","IVALDATE","IVALSTART","IVALEND","NUMENTIDS"<cr><lf>"tekelecstp","30.0.0-48.1.0","2002-12-17","15:51:37","EST","GATEWAY MEASUREMENTS ON LSONISMT","LAST","2002-12-17","15:00:00","15:30:00",400<cr><lf><cr><lf>"STATUS","LSN","LSTYPE","NI","ISMT","MSUISPMT"<cr><lf>"K","ls1201","ANSI",5,6,34033<cr><lf>. . . . ."K","lsitu","ITU",,7,57021<cr><lf>
Assuming each data line will be:
4 char status + 8 char LSN + 6 char LSTYPE + 4 char NI + 4 char ISMT + 1*(6 char data) + 2 = 34 chars
For a report of 400 LSONISMT, typical file size is:
344E86977 Revision 1, July 2017
ReportsMeasurements
Table 210: Typical File Size: gtwy-lsonismt.csv
File Size=Report data+Reportheader+System
header
13899 bytes=13600+49+250
Record Base Measurements (RBASE)
The RBASE measurements report various data related to the configuration or status of the EAGLE’smajor configurable components. The data in this measurement report is obtained from either thedatabase or from maintenance tasks performed on the EAGLE. The data is not periodically collectedand stored in the manner of other measurements data, but it is collected on demand when a RBASEmeasurement report is requested.
Entity Types:STP, Lnkset, and Link
Accumulation Interval: Snapshot
STP Retention Period: None
Reporting Mode: Scheduled-Polled (SEAS only), On-demand
Accessible Collection Period: Active
STP RBASE Report
Command Examples
• UI
rept-meas:type=rbase:enttype=stp
• FTP
rept-ftp-meas:type=rbase:enttype=stp
Measurement Events
Table 211: Record Base STP Measurements
UnitDescriptionEvent Name
peg countThe number of IS-NR or IS-ANRIMT buses
BUSS
secondsThe value of the SCCPManagement: subsystem status
CTSDLSST
test (SS7) delay timer (level 3 T32timer). This value of this timer is
345E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
fixed at 30 seconds and is notconfigurable.
peg countThe number of configuredsignaling links.
LINKS
peg countThe number of configuredlinksets.
LNKSETS
secondsThe value of the delay to avoidmis-sequencing on changeovertimer (level 3 T1 timer).
NT1TDCHO
secondsThe value of the waiting forchangeover acknowledgmenttimer (level 3 T2 timer).
NT2CHOAK
secondsThe value of the delay to avoidmis-sequencing on changebacktimer (level 3 T3 timer).
NT3TDCHB
secondsThe value of the waiting forchangeover acknowledgment
NT4CHBK1
(first attempt) timer (level 3 T4timer).
secondsThe value of the waiting forchangeover acknowledgment
NT5CHBK2
(second attempt) timer (level 3T5 timer).
secondsThe value of the delay to avoidmis-sequencing on controlled
NT6TDCRR
rerouting timer (level 3 T6timer).
secondsThe value of the waiting forsignaling link connection
NT7SLKCN
acknowledgment timer (level 3T7 timer).
secondsThe value of the transferprohibited inhibited timer (level3 T8 timer).
NT8TRPRH
secondsThe value of the waiting torepeat signaling routeset testtimer (level 3 T10 timer).
NT10SRST
346E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
secondsThe value of the transferrestricted timer (level 3 T11timer).
NT11TFRS
secondsThe value of the waiting foruninhibit timer (level 3 T12timer).
NT12UNAK
secondsThe value of the waiting for forceuninhibit timer (level 3 T13timer).
NT13FUNH
secondsThe value of the waiting forinhibition acknowledgmenttimer (level 3 T14 timer).
NT14INAK
secondsThe value of the waiting forrepeat signaling routeset
NT15RSCT
congestion test timer (level 3 T15timer).
secondsThe value of the waiting forrouteset status update timer(level 3 T16 timer).
NT16RSCS
secondsThe value of the delay to avoidoscillation of initial alignment
NT17REAL
failure and restart timer (level 3T17 timer).
secondsThe value of the transfer clusterrestricted interval timer (level 3T18 timer).
NT18TCLR
secondsThe value of the failed link craftreferral timer (level 3 T19 timer).
NT19FLKR
secondsThe value of the waiting torepeat local inhibit test timer(level 3 T20 timer).
NT20RLIH
secondsThe value of the waiting torepeat remote inhibit test timer(level 3 T21 timer).
NT21RRIH
secondsThe value of the restarting SPwaiting for links to become
NT22RSTL
available timer (level 3 T22timer).
347E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
secondsThe value of the waiting afterT22 to receive all TRAs timer(level 3 T23 timer).
NT23WTRA
secondsThe value of the restarting:waiting to broadcast all TRAstimer (level 3 T24 timer).
NT24BTRA
secondsThe value of the adjacent andrestarting: waiting for TRA timer(level 3 T25 timer).
NT25WTRA
secondsThe value of the restarting:waiting to repeat TRW timer(level 3 T26 timer).
NT26RTRW
secondsThe value of the adjacent:waiting for TRW timer (level 3T28 timer).
NT28WTRW
secondsThe value of the TRA sent,unexpected TRA, TRW,
NT29RSUX
resumption timer (level 3 T29timer).
secondsThe value of the limitTFPs/TFRs for unexpected
NT30LMTF
TRAs/TRWs timer (level 3 T30timer).
secondsThe value of the false linkcongestion detection timer (level3 T31 timer).
NT31FLCD
secondsThe value of the link oscillationfilter - procedure A timer (level3 T32 timer).
NT32OSCA
peg countThe number of configured cardsthat are in service normal
PROCS
(IS-NR) or in-service abnormal(IS-ANR).
statusIndication of Data Validity:STATUS
K indicates good dataI indicates incompleteintervalN indicates data not current
348E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
secondsThe value of the supervisiontimer for circular route detection
STLOOP
test timer (the value of themtpltst parameter of thechg-stpopts command).
secondsJT-Q.704/NTT-Q.704 Tc timer:To release (reset) transfer
NTCRSCS
controlled status of a DPC intime controlled fashion.
UI Reports
UI Example Output:
Tekelecstp 15-09-20 01:10:32 EST EAGLE5 46.3.0.0.0-66.13.0 TYPE OF REPORT: RECORD BASE MEASUREMENTS ON STP REPORT PERIOD: ACTIVE REPORT INTERVAL: 15-09-20, 01:10:32 THROUGH CURRENT
STP-RBASE MEASUREMENTS
PROCS = 10, LNKSETS = 6, LINKS = 6, BUSS = 2, NT1TDCHO = 0.8, NT2CHOAK = 1.4, NT3TDCHB = 0.8, NT4CHBK1 = 0.8, NT5CHBK2 = 0.8, NT6TDCRR = 0.8, NT7SLKCN = 1, NT8TRPRH = 0.8, NT10SRST = 30, NT11TFRS = 30, NT12UNAK = 0.8, NT13FUNH = 0.8, NT14INAK = 2, NT15RSCT = 3, NT16RSCS = 1.4, NT17REAL = 0.8, NT18TCLR = 10, NT19FLKR = 480, NT20RLIH = 90, NT21RRIH = 90, NT22RSTL = 10, NT23WTRA = 10, NT24BTRA = 10, NT25WTRA = 30, NT26RTRW = 12, NT28WTRW = 3, NT29RSUX = 60, NT30LMTF = 30, NT31FLCD = 60, NT32OSCA = 60, STLOOP = 10, CTSDLSST = 30, NTCRSCS = 4
FTP Reports
FTP Example Output File Name: rbase-stp_20101005_1937.csv
FTP Example Output File Format:
"CLLI","SWREL","RPTDATE","RPTIME","TZ","RPTTYPE","RPTPD","IVALDATE","IVALSTART","IVALEND","NUMENTIDS"<cr><lf>"tekelecstp","EAGLE5 46.3.0.0.0-66.13.0","2015-09-20","01:11:25","EST ","RECORD BASE MEASUREMENTS ON STP","ACTIVE","2015-09-20","01:11:25","01:11:25",1<cr><lf><cr><lf>"STATUS","PROCS","LNKSETS","LINKS","BUSS","NT1TDCHO","NT2CHOAK","NT3TDCHB","NT4CHBK1","NT5CHBK2","NT6TDCRR","NT7SLKCN","NT8TRPRH","NT10SRST","NT11TFRS","NT12UNAK","NT13FUNH","NT14INAK","NT15RSCT","NT16RSCS","NT17REAL","NT18TCLR","NT19FLKR","NT20RLIH","NT21RRIH","NT22RSTL","NT23WTRA","NT24BTRA","NT25WTRA","NT26RTRW","NT28WTRW","NT29RSUX","NT30LMTF","NT31FLCD","NT32OSCA","STLOOP","CTSDLSST","NTCRSCS"<cr><lf>"K",10,6,6,2,0.8,1.4,0.8,0.8,0.8,0.8,1,0.8,30,30,0.8,0.8,2,3,1.4,0.8,10,480,90,90,10,10,10,30,12,3,60,30,60,60,10,30,4<cr><lf>
Typical file size is:
Assuming each data line will be:
349E86977 Revision 1, July 2017
ReportsMeasurements
4 char status + 37 * (6 char data) + 2 = 228 chars
Table 212: Typical File Size: rbase-stp.csv
File Size=Report data+Reportheader+System
header
882 bytes=228+404+250
LINK RBASE Report
Certain registers are reported for MTP2, SAAL, IPVL, and IPVHSL classes. These registers aresummarized in the following table.
Table 213: Registers reported LINK Measurements
SAAL usageMTP2, IPVL, IPVLGW, &IPVHSL usage
Register
not reportedas describedLT1ALNRD
not reportedas describedLT2NOALN
not reportedas describedLT3ALIND
not reportedas describedLT4NMLPV
not reportedas describedLT4EMGPV
not reportedas describedLT5SDSIB
not reportedas describedLT6RMCNG
not reportedas describedLT7XDLAK
Command Examples
• UI
rept-meas:type=rbase:enttype=link:loc=1201:link=a
rept-meas:type=rbase:enttype=link:lsn=ls3
• FTP
rept-ftp-meas:type=rbase:enttype=link
350E86977 Revision 1, July 2017
ReportsMeasurements
Measurement Events
Table 214: Record Base Link Measurements
UnitDescriptionEvent Name
MSUsThe level 1congestion onset
CNGONTH1
threshold for linktransmit buffers
MSUsThe level 1congestion discard
CNGDITH1
threshold for linktransmit buffers
MSUsThe level 1congestion
CNGABTH1
abatementthreshold for linktransmit buffers
MSUsThe level 2congestion onset
CNGONTH2
threshold for linktransmit buffers
MSUsThe level 2congestion discard
CNGDITH2
threshold for linktransmit buffers
MSUsThe level 2congestion
CNGABTH2
abatementthreshold for linktransmit buffers
MSUsThe level 3congestion onset
CNGONTH3
threshold for linktransmit buffers
MSUsThe level 3congestion discard
CNGDITH3
threshold for linktransmit buffers
MSUsThe level 3congestion
CNGABTH3
abatementthreshold for linktransmit buffers
351E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
statusIndication of DataValidity:
STATUS
K indicatesgood dataI indicatesincompleteintervalN indicatesdata notcurrent
The following registers are applicable to MTP level 2 links ONLY. These registers are omitted fromreports for ATM based links on EAGLE HMI output. On SEAS reports these registers are reportedas ZERO-valued.
secondsThe value of thealigned/ready
LT1ALNRD
timer (level 2 T1timer).
secondsThe value of thenot aligned timer(level 2 T2 timer).
LT2NOALN
secondsThe value of thealigned timer(level 2 T3 timer).
LT3ALIND
secondsThe value of theproving period
LT4NMLPV
(normal) timer(level 2 T4npptimer).
secondsThe value of theproving period
LT4EMGPV
(emergency) timer(level 2 T4epptimer).
secondsThe value of thesending SIB timer(level 2 T5 timer).
LT5SDSIB
secondsThe value of theremote congestion
LT6RMCNG
timer (level 2 T6timer).
352E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
secondsThe value of theexcessive delay of
LT7XDLAK
acknowledgmenttimer (level 2 T7timer).
UI Reports
• rept-meas:type=rbase:enttype=link:loc=1201:link=a
tekelecstp 12-02-21 01:24:28 EST EAGLE5 44.0.0 TYPE OF REPORT: RECORD BASE MEASUREMENTS ON LINK REPORT PERIOD: ACTIVE REPORT INTERVAL: 12-02-21, 01:24:28 THROUGH CURRENT
LINK-RBASE MEASUREMENTS: LOC: 1104, LINK: A , LSN: mtp2 (MTP2)
CNGONTH1 = 80, CNGDITH1 = 99, CNGABTH1 = 60, CNGONTH2 = 101, CNGDITH2 = 109, CNGABTH2 = 81, CNGONTH3 = 111, CNGDITH3 = 120, CNGABTH3 = 102, LT1ALNRD = 13, LT2NOALN = 11.5, LT3ALIND = 11.5, LT4NMLPV = 2.3, LT4EMGPV = 0.6, LT5SDSIB = 0.1, LT6RMCNG = 4, LT7XDLAK = 1.5
;
tekelecstp1 12-03-22 19:15:21 EST EAGLE5 44.0.0 TYPE OF REPORT: RECORD BASE MEASUREMENTS ON LINK REPORT PERIOD: ACTIVE REPORT INTERVAL: 12-03-22, 19:15:21 THROUGH CURRENT
LINK-RBASE MEASUREMENTS: LOC: 1103, LINK: A , LSN: ipsg (IPVL)
CNGONTH1 = 480, CNGDITH1 = 600, CNGABTH1 = 241, CNGONTH2 = 605, CNGDITH2 = 720, CNGABTH2 = 481, CNGONTH3 = 725, CNGDITH3 = 840, CNGABTH3 = 606
;
tekelecstp1 12-03-22 19:16:04 EST EAGLE5 44.0.0 TYPE OF REPORT: RECORD BASE MEASUREMENTS ON LINK REPORT PERIOD: ACTIVE REPORT INTERVAL: 12-03-22, 19:16:04 THROUGH CURRENT
LINK-RBASE MEASUREMENTS: LOC: 1112, LINK: A , LSN: saal (SAAL)
CNGONTH1 = 560, CNGDITH1 = 693, CNGABTH1 = 420, CNGONTH2 = 707, CNGDITH2 = 763, CNGABTH2 = 567, CNGONTH3 = 777, CNGDITH3 = 840, CNGABTH3 = 714
;
tekelecstp1 12-03-22 19:16:23 EST EAGLE5 44.0.0 TYPE OF REPORT: RECORD BASE MEASUREMENTS ON LINK REPORT PERIOD: ACTIVE REPORT INTERVAL: 12-03-22, 19:16:23 THROUGH CURRENT
353E86977 Revision 1, July 2017
ReportsMeasurements
LINK-RBASE MEASUREMENTS: LOC: 1107, LINK: A , LSN: ssedcm2 (IPVLGW)
CNGONTH1 = 750, CNGDITH1 = 998, CNGABTH1 = 401, CNGONTH2 = 1000, CNGDITH2 = 1248, CNGABTH2 = 751, CNGONTH3 = 1250, CNGDITH3 = 1375, CNGABTH3 = 1001
;
tekelecstp1 12-03-22 19:16:56 EST EAGLE5 44.0.0 TYPE OF REPORT: RECORD BASE MEASUREMENTS ON LINK REPORT PERIOD: ACTIVE REPORT INTERVAL: 12-03-22, 19:16:56 THROUGH CURRENT
LINK-RBASE MEASUREMENTS: LOC: 1203, LINK: A , LSN: hcmimt1 (MTP2-UNCH)
CNGONTH1 = 640, CNGDITH1 = 792, CNGABTH1 = 480, CNGONTH2 = 808, CNGDITH2 = 872, CNGABTH2 = 648, CNGONTH3 = 888, CNGDITH3 = 960, CNGABTH3 = 816, LT1ALNRD = 151, LT2NOALN = 14, LT3ALIND = 14, LT4NMLPV = 30, LT4EMGPV = 3, LT5SDSIB = 0.08, LT6RMCNG = 3, LT7XDLAK = 0.5
;
• rept-meas:type=rbase:enttype=link:lsn=xxx
tekelecstp 12-02-21 01:26:45 EST EAGLE5 44.0.0 TYPE OF REPORT: RECORD BASE MEASUREMENTS ON LINK REPORT PERIOD: ACTIVE REPORT INTERVAL: 12-02-21, 01:26:45 THROUGH CURRENT
LINK-RBASE MEASUREMENTS FOR LINKSET mtp2:
LINK-RBASE MEASUREMENTS: LOC: 1104, LINK: A , LSN: mtp2 (MTP2)
CNGONTH1 = 80, CNGDITH1 = 99, CNGABTH1 = 60, CNGONTH2 = 101, CNGDITH2 = 109, CNGABTH2 = 81, CNGONTH3 = 111, CNGDITH3 = 120, CNGABTH3 = 102, LT1ALNRD = 13, LT2NOALN = 11.5, LT3ALIND = 11.5, LT4NMLPV = 2.3, LT4EMGPV = 0.6, LT5SDSIB = 0.1, LT6RMCNG = 4, LT7XDLAK = 1.5
;
tekelecstp1 12-03-22 19:37:29 EST EAGLE5 44.0.0 TYPE OF REPORT: RECORD BASE MEASUREMENTS ON LINK REPORT PERIOD: ACTIVE REPORT INTERVAL: 12-03-22, 19:37:29 THROUGH CURRENT
LINK-RBASE MEASUREMENTS FOR LINKSET ipsg:
LINK-RBASE MEASUREMENTS: LOC: 1103, LINK: A , LSN: ipsg (IPVL)
CNGONTH1 = 480, CNGDITH1 = 600, CNGABTH1 = 241, CNGONTH2 = 605, CNGDITH2 = 720, CNGABTH2 = 481, CNGONTH3 = 725, CNGDITH3 = 840, CNGABTH3 = 606
;
354E86977 Revision 1, July 2017
ReportsMeasurements
tekelecstp1 12-03-22 19:38:01 EST EAGLE5 44.0.0 TYPE OF REPORT: RECORD BASE MEASUREMENTS ON LINK REPORT PERIOD: ACTIVE REPORT INTERVAL: 12-03-22, 19:38:01 THROUGH CURRENT
LINK-RBASE MEASUREMENTS FOR LINKSET saal:
LINK-RBASE MEASUREMENTS: LOC: 1112, LINK: A , LSN: saal (SAAL)
CNGONTH1 = 560, CNGDITH1 = 693, CNGABTH1 = 420, CNGONTH2 = 707, CNGDITH2 = 763, CNGABTH2 = 567, CNGONTH3 = 777, CNGDITH3 = 840, CNGABTH3 = 714
;
tekelecstp1 12-03-22 19:38:42 EST EAGLE5 44.0.0 TYPE OF REPORT: RECORD BASE MEASUREMENTS ON LINK REPORT PERIOD: ACTIVE REPORT INTERVAL: 12-03-22, 19:38:42 THROUGH CURRENT
LINK-RBASE MEASUREMENTS FOR LINKSET ssedcm2:
LINK-RBASE MEASUREMENTS: LOC: 1107, LINK: A , LSN: ssedcm2 (IPVLGW)
CNGONTH1 = 750, CNGDITH1 = 998, CNGABTH1 = 401, CNGONTH2 = 1000, CNGDITH2 = 1248, CNGABTH2 = 751, CNGONTH3 = 1250, CNGDITH3 = 1375, CNGABTH3 = 1001
;
tekelecstp 12-02-21 01:28:20 EST EAGLE5 44.0.0 TYPE OF REPORT: RECORD BASE MEASUREMENTS ON LINK REPORT PERIOD: ACTIVE REPORT INTERVAL: 12-02-21, 01:28:20 THROUGH CURRENT
LINK-RBASE MEASUREMENTS FOR LINKSET hcmimt1:
LINK-RBASE MEASUREMENTS: LOC: 1203, LINK: A , LSN: hcmimt1 (MTP2-UNCH)
CNGONTH1 = 640, CNGDITH1 = 792, CNGABTH1 = 480, CNGONTH2 = 808, CNGDITH2 = 872, CNGABTH2 = 648, CNGONTH3 = 888, CNGDITH3 = 960, CNGABTH3 = 816, LT1ALNRD = 151, LT2NOALN = 14, LT3ALIND = 14, LT4NMLPV = 30, LT4EMGPV = 3, LT5SDSIB = 0.08, LT6RMCNG = 3, LT7XDLAK = 0.5
;
FTP Reports
FTP Example Output File Name: rbase-link_20101005_2042.csv
355E86977 Revision 1, July 2017
ReportsMeasurements
FTP Example Output File Format:
"CLLI","SWREL","RPTDATE","RPTIME","TZ","RPTTYPE","RPTPD","IVALDATE","IVALSTART","IVALEND","NUMENTIDS"<cr><lf>"tekelecstp","EAGLE5 44.0.0-64.23.0","2012-02-21","01:11:21","EST ","RECORD BASE MEASUREMENTS ON LINK","ACTIVE","2012-02-21","01:11:21","01:11:21",6<cr><lf><cr><lf>"STATUS","LSN","LOC","LINK","LNKTYPE","CNGONTH1","CNGDITH1","CNGABTH1","CNGONTH2","CNGDITH2","CNGABTH2","CNGONTH3","CNGDITH3","CNGABTH3","LT1ALNRD","LT2NOALN","LT3ALIND","LT4NMLPV","LT4EMGPV","LT5SDSIB","LT6RMCNG","LT7XDLAK"<cr><lf>"K","hcmimt1","1203","A ","MTP2-UNCH",640,792,480,808,872,648,888,960,816,151,14,14,30,3,0.080, 3,0.5<cr><lf>"K","ipsg","1103","A ","IPVL",480,600,241,605,720,481,725,840,606,0,0,0,0,0,0,0,0<cr><lf>"K","mtp2","1104","A ","MTP2",80,99,60,101,109,81,111,120,102,13,11.5,11.5,2.3,0.6,0.1,4,1.5 <cr><lf>"K","m3uals","1105","A ","IPVLGW",750,998,401,1000,1248,751,1250,1375,1001,0,0,0,0,0,0,0,0 <cr><lf>"K","ssedcm2","1107","A ","IPVLGW",750,998,401,1000,1248,751,1250,1375,1001,0,0,0,0,0,0,0,0 <cr><lf>"K","saal","1112","A ","SAAL",560,693,420,707,763,567,777,840,714,0,0,0,0,0,0,0,0<cr><lf>
Assuming each data line will be:
4 char status + 13 char LSN + 7 char LOC + 5 char LINK + 12 char LNKTYPE + 17*(6 char data) + 2 =145 chars
Table 215: Typical File Size: rbase-link.csv
File Size=Report data+Reportheader+System
header
145,477 bytes=145,000+227+250
LNKSET RBASE Report
Command Examples
• UI
rept-meas:type=rbase:enttype=lnkset:lsn=1201a
• FTP
rept-ftp-meas:type=rbase:enttype=lnkset
356E86977 Revision 1, July 2017
ReportsMeasurements
Measurement Events
Table 216: Record Base Linkset Measurements
UnitDescriptionEvent Name
peg countThe number of configuredsignaling links.
LINKS
peg countThe number of receiving linkbuffers. The number of receiving
RCLKBFRS
link buffers is always 1 for eachsignaling link, so a value of 1 isalways reported for this register.
secondsSupervision timer for SLTA.ST01SLTA
secondsSLT interval timer.ST02SLTI
statusIndication of Data Validity:STATUS
K indicates good dataI indicates incompleteintervalN indicates data not current
UI Reports
rept-meas:type=nm:enttype=lnkset:lsn=xxxx
tekelecstp 12-02-21 01:14:30 EST EAGLE5 44.0.0 TYPE OF REPORT: RECORD BASE MEASUREMENTS ON LNKSET REPORT PERIOD: ACTIVE REPORT INTERVAL: 12-02-21, 01:14:30 THROUGH CURRENT
LNKSET-RBASE MEASUREMENTS: mtp2 (MTP2)
LINKS = 1, RCLKBFRS = 1, ST01SLTA = 4, ST02SLTI = 30
;
tekelecstp1 12-03-22 19:12:04 EST EAGLE5 44.0.0 TYPE OF REPORT: RECORD BASE MEASUREMENTS ON LNKSET REPORT PERIOD: ACTIVE REPORT INTERVAL: 12-03-22, 19:12:04 THROUGH CURRENT
LNKSET-RBASE MEASUREMENTS: ipsg (IPVL)
LINKS = 1, RCLKBFRS = 1
;
tekelecstp1 12-03-22 19:12:09 EST EAGLE5 44.0.0 TYPE OF REPORT: RECORD BASE MEASUREMENTS ON LNKSET REPORT PERIOD: ACTIVE
357E86977 Revision 1, July 2017
ReportsMeasurements
REPORT INTERVAL: 12-03-22, 19:12:09 THROUGH CURRENT
LNKSET-RBASE MEASUREMENTS: saal (SAAL)
LINKS = 1, RCLKBFRS = 1, ST01SLTA = 4, ST02SLTI = 30
;
tekelecstp 12-02-21 01:15:52 EST EAGLE5 44.0.0 TYPE OF REPORT: RECORD BASE MEASUREMENTS ON LNKSET REPORT PERIOD: ACTIVE REPORT INTERVAL: 12-02-21, 01:15:52 THROUGH CURRENT
LNKSET-RBASE MEASUREMENTS: hcmimt1 (MTP2-UNCH)
LINKS = 1, RCLKBFRS = 1, ST01SLTA = 4, ST02SLTI = 30
;
FTP Reports
FTP Example Output File Name: rbase-lnkset_20101005_1941.csv
FTP Example Output File Format:
"CLLI","SWREL","RPTDATE","RPTIME","TZ","RPTTYPE","RPTPD","IVALDATE","IVALSTART","IVALEND","NUMENTIDS"<cr><lf>"tekelecstp","EAGLE5 44.0.0-64.23.0","2012-02-21","01:17:12","EST ","RECORD BASE MEASUREMENTS ON LNKSET","ACTIVE","2012-02-21","01:17:12","01:17:12",6<cr><lf><cr><lf>"STATUS","LSN","LNKTYPE","LINKS","RCLKBFRS","ST01SLTA","ST02SLTI"<cr><lf>"K","mtp2","MTP2",1,1,4,30<cr><lf>"K","ipsg","IPVL",1,1,0,0<cr><lf>"K","m3uals","IPVL",1,1,0,0<cr><lf>"K","hcmimt1","MTP2-UNCH",1,1,4,30<cr><lf>"K","ssedcm2","IPVL",1,1,0,0<cr><lf>"K","saal","SAAL",1,1,4,30<cr><lf>
Assuming each data line will be:
4 char status + 13 char LSN + 12 char LNKTYPE + 4*(6 char data) + 2 = 55 chars
Table 217: Typical File Size: rbase-lnkset.csv
File Size=Report data+Reportheader+System
header
33,318 bytes=33,000+68+250
358E86977 Revision 1, July 2017
ReportsMeasurements
Maintenance Status Reports (MTCS)
The Maintenance Status (MTCS) report is a snapshot of the maintenance status indicators. It supportsentity types LINK and LNKSET. The report is available through the EAGLE terminal interface andthrough the SEAS interface via the IPSM.
Entity Types: Lnkset and Link
Accumulation Interval: Snapshot
STP Retention Period: None
Reporting Mode: On-demand (EAGLE/SEAS)
Accessible Collection Period: Active (snapshot)
LINK MTCS Report
Command Examples
• UI
rept-meas:type=mtcs:enttype=link:loc=1201:link=a
rept-meas:type=mtcs:enttype=link:lsn=ls3:period=active
• FTP
rept-ftp-meas:type=mtcs:enttype=link
Measurement Events
Table 218: Maintenance Status Link Measurements
UnitDescriptionEvent Name
ACT – link primary state isIS-NR and is or can be used tocarry traffic.
Maintenance StateLKMTCST
UNAV - link has been madeunavailable by local orcentralized maintenancepersonnel (inhibited or canceledlink or active local processoroutage).
OOS – link out-of-service butcan be made available by theSTP.
Y – link failure reason of remoteprocessor outage exists.
Indication of processor outagestatus units being received.
PROSTAT
359E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
N - link failure reason of remoteprocessor outage does not exist.
Y – link failure reason of localprocessor outage exists.
Indication of processor outagestatus units being transmitted.
PROTRAN
N - link failure reason of localprocessor outage does not exist.
L (Local) - link is deactivated orinhibited or link failure reasonof local processor outage exists.
Indication of link managementinhibit status
MGMTINHB
R (remote) - link failure reasonof remote processor outage existsor remote management initiatedexists.
B (Both) –both local and removefailure reasons exist.
N (Not/Neither) no local orremote failure reasons exists.
Congestion level:Current link transmit congestionlevel
CGSTLEVL
0 – no link congestion
1, 2, or 3 - link congestion levelexists.
N – none (congestion level 0)Current link transmit congestionstate
CGSTSTAT
O – onset (congestion level 1, 2,or 3)
N – not failed.Indication of link declaredfailure state (last known cause)
DCLRFAIL
LSL: Link is available to sendand receive MSUs (in-servicenormal state).
HSL: Same
ABN – link failed due toreceiving too many abnormalFIBR/BNSR.
LSL: Link received 2 out of 3invalid BSNs.
Link received 2 out of 3 invalidFIBs.
HSL: N/A
360E86977 Revision 1, July 2017
ReportsMeasurements
UnitDescriptionEvent Name
XDA – Excessive delay ofacknowledgment
LSL: MSU not acknowledgedwithin level 2 -T7 timerexpiration. T7 configurablebetween .5 and 2.0 seconds.
HSL: Timer no response or timerno credit expired.
XER – Excessive error rate.
Received 64 out of 256 signalingunits in error.
LSL: Signaling Unit Error RateMonitor
HSL: SignalingUnit-Error-Rate-Monitorthreshold exceeded.
XDC – Excessive duration ofcongestion
LSL: Level-2 T6 timed-out
HSL: N/A.
APF – alignment/provingfailure
LSL: Link not aligned. Link statecontrol aligned not ready oraligned ready timeout (T1),initial alignment control timeout(T2,T3), initial alignment controlabort proving – maximumproving period, or initialalignment control received SIOS.
HSL: N/A.
statusIndication of Data Validity:STATUS
K indicates good dataI indicates incompleteintervalN indicates data not current
361E86977 Revision 1, July 2017
ReportsMeasurements
UI Reports
• rept-meas:type=mtcs:enttype=link:loc=1201:link=a
tekelecstp 12-02-21 04:36:38 EST EAGLE5 44.0.0 TYPE OF REPORT: MAINTENANCE STATUS INDICATORS ON LINK REPORT PERIOD: ACTIVE REPORT INTERVAL: 12-02-21, 04:36:38 THROUGH CURRENT
LINK-MTCS MEASUREMENTS: LOC: 1104, LINK: A , LSN: mtp2 (MTP2)
LKMTCST = 'UNAV', PROSTAT = 'N', PROTRAN = 'N', DCLRFAIL = 'APF', MGMTINHB = 'N', CGSTLEVL = '0', CGSTSTAT = 'N'
;
tekelecstp 12-02-21 04:36:57 EST EAGLE5 44.0.0 TYPE OF REPORT: MAINTENANCE STATUS INDICATORS ON LINK REPORT PERIOD: ACTIVE REPORT INTERVAL: 12-02-21, 04:36:57 THROUGH CURRENT
LINK-MTCS MEASUREMENTS: LOC: 1103, LINK: A , LSN: ipsg (IPVL)
LKMTCST = 'OOS', PROSTAT = 'N', PROTRAN = 'N', DCLRFAIL = 'MMR', MGMTINHB = 'L', CGSTLEVL = '0', CGSTSTAT = 'N'
;
tekelecstp 12-02-21 04:37:12 EST EAGLE5 44.0.0 TYPE OF REPORT: MAINTENANCE STATUS INDICATORS ON LINK REPORT PERIOD: ACTIVE REPORT INTERVAL: 12-02-21, 04:37:12 THROUGH CURRENT
LINK-MTCS MEASUREMENTS: LOC: 1105, LINK: A , LSN: m3uals (IPVLGW)
LKMTCST = 'OOS', PROSTAT = 'N', PROTRAN = 'N', DCLRFAIL = 'MMR', MGMTINHB = 'L', CGSTLEVL = '0', CGSTSTAT = 'N'
;
tekelecstp 12-02-21 04:37:25 EST EAGLE5 44.0.0 TYPE OF REPORT: MAINTENANCE STATUS INDICATORS ON LINK REPORT PERIOD: ACTIVE REPORT INTERVAL: 12-02-21, 04:37:25 THROUGH CURRENT
LINK-MTCS MEASUREMENTS: LOC: 1112, LINK: A , LSN: saal (SAAL)
LKMTCST = 'OOS', PROSTAT = 'N', PROTRAN = 'N', DCLRFAIL = 'MMR', MGMTINHB = 'L', CGSTLEVL = '0', CGSTSTAT = 'N'
;
tekelecstp 12-02-21 04:37:45 EST EAGLE5 44.0.0 TYPE OF REPORT: MAINTENANCE STATUS INDICATORS ON LINK REPORT PERIOD: ACTIVE REPORT INTERVAL: 12-02-21, 04:37:45 THROUGH CURRENT
362E86977 Revision 1, July 2017
ReportsMeasurements
LINK-MTCS MEASUREMENTS: LOC: 1107, LINK: A , LSN: ssedcm2 (IPVLGW)
LKMTCST = 'OOS', PROSTAT = 'N', PROTRAN = 'N', DCLRFAIL = 'MMR', MGMTINHB = 'L', CGSTLEVL = '0', CGSTSTAT = 'N'
;
tekelecstp 12-02-21 04:38:00 EST EAGLE5 44.0.0 TYPE OF REPORT: MAINTENANCE STATUS INDICATORS ON LINK REPORT PERIOD: ACTIVE REPORT INTERVAL: 12-02-21, 04:38:00 THROUGH CURRENT
LINK-MTCS MEASUREMENTS: LOC: 1203, LINK: A , LSN: hcmimt1 (MTP2-UNCH)
LKMTCST = 'OOS', PROSTAT = 'N', PROTRAN = 'N', DCLRFAIL = 'MMR', MGMTINHB = 'L', CGSTLEVL = '0', CGSTSTAT = 'N'
;
• rept-meas:type=mtcs:enttype=link:lsn=xxx
tekelecstp 12-02-21 04:38:49 EST EAGLE5 44.0.0-64.23.0 TYPE OF REPORT: MAINTENANCE STATUS INDICATORS ON LINK REPORT PERIOD: ACTIVE REPORT INTERVAL: 12-02-21, 04:38:49 THROUGH CURRENT
LINK-MTCS MEASUREMENTS FOR LINKSET mtp2:
LINK-MTCS MEASUREMENTS: LOC: 1104, LINK: A , LSN: mtp2 (MTP2)
LKMTCST = 'UNAV', PROSTAT = 'N', PROTRAN = 'N', DCLRFAIL = 'APF', MGMTINHB = 'N', CGSTLEVL = '0', CGSTSTAT = 'N'
;
tekelecstp 12-02-21 04:39:04 EST EAGLE5 44.0.0-64.23.0 TYPE OF REPORT: MAINTENANCE STATUS INDICATORS ON LINK REPORT PERIOD: ACTIVE REPORT INTERVAL: 12-02-21, 04:39:04 THROUGH CURRENT
LINK-MTCS MEASUREMENTS FOR LINKSET ipsg:
LINK-MTCS MEASUREMENTS: LOC: 1103, LINK: A , LSN: ipsg (IPVL)
LKMTCST = 'OOS', PROSTAT = 'N', PROTRAN = 'N', DCLRFAIL = 'MMR', MGMTINHB = 'L', CGSTLEVL = '0', CGSTSTAT = 'N'
;
tekelecstp 12-02-21 04:39:24 EST EAGLE5 44.0.0-64.23.0 TYPE OF REPORT: MAINTENANCE STATUS INDICATORS ON LINK REPORT PERIOD: ACTIVE REPORT INTERVAL: 12-02-21, 04:39:24 THROUGH CURRENT
LINK-MTCS MEASUREMENTS FOR LINKSET m3uals:
363E86977 Revision 1, July 2017
ReportsMeasurements
LINK-MTCS MEASUREMENTS: LOC: 1105, LINK: A , LSN: m3uals (IPVLGW)
LKMTCST = 'OOS', PROSTAT = 'N', PROTRAN = 'N', DCLRFAIL = 'MMR', MGMTINHB = 'L', CGSTLEVL = '0', CGSTSTAT = 'N'
;
tekelecstp 12-02-21 04:39:40 EST EAGLE5 44.0.0-64.23.0 TYPE OF REPORT: MAINTENANCE STATUS INDICATORS ON LINK REPORT PERIOD: ACTIVE REPORT INTERVAL: 12-02-21, 04:39:40 THROUGH CURRENT
LINK-MTCS MEASUREMENTS FOR LINKSET saal:
LINK-MTCS MEASUREMENTS: LOC: 1112, LINK: A , LSN: saal (SAAL)
LKMTCST = 'OOS', PROSTAT = 'N', PROTRAN = 'N', DCLRFAIL = 'MMR', MGMTINHB = 'L', CGSTLEVL = '0', CGSTSTAT = 'N'
;
tekelecstp 12-02-21 04:39:59 EST EAGLE5 44.0.0-64.23.0 TYPE OF REPORT: MAINTENANCE STATUS INDICATORS ON LINK REPORT PERIOD: ACTIVE REPORT INTERVAL: 12-02-21, 04:39:59 THROUGH CURRENT
LINK-MTCS MEASUREMENTS FOR LINKSET ssedcm2:
LINK-MTCS MEASUREMENTS: LOC: 1107, LINK: A , LSN: ssedcm2 (IPVLGW)
LKMTCST = 'OOS', PROSTAT = 'N', PROTRAN = 'N', DCLRFAIL = 'MMR', MGMTINHB = 'L', CGSTLEVL = '0', CGSTSTAT = 'N'
;
tekelecstp 12-02-21 04:40:17 EST EAGLE5 44.0.0-64.23.0 TYPE OF REPORT: MAINTENANCE STATUS INDICATORS ON LINK REPORT PERIOD: ACTIVE REPORT INTERVAL: 12-02-21, 04:40:17 THROUGH CURRENT
LINK-MTCS MEASUREMENTS FOR LINKSET hcmimt1:
LINK-MTCS MEASUREMENTS: LOC: 1203, LINK: A , LSN: hcmimt1 (MTP2-UNCH)
LKMTCST = 'OOS', PROSTAT = 'N', PROTRAN = 'N', DCLRFAIL = 'MMR', MGMTINHB = 'L', CGSTLEVL = '0', CGSTSTAT = 'N'
;
364E86977 Revision 1, July 2017
ReportsMeasurements
FTP Reports
FTP Example Output File Name: mtcs-link_20101005_2123.csv
"CLLI","SWREL","RPTDATE","RPTIME","TZ","RPTTYPE","RPTPD","IVALDATE","IVALSTART","IVALEND","NUMENTIDS"<cr><lf>"tekelecstp","EAGLE5 44.0.0-64.23.0","2012-02-21","04:41:05","EST ","MAINTENANCE STATUS INDICATORS ON LINK","ACTIVE","2012-02-21","04:41:05","04:41:05",8<cr><lf><cr><lf>"STATUS","LSN","LOC","LINK","LNKTYPE","LKMTCST","PROSTAT","PROTRAN","DCLRFAIL","MGMTINHB","CGSTLEVL","CGSTSTAT"<cr><lf>"K","hcmimt1","1203","A ","MTP2-UNCH","'OOS'","'N'","'N'","'MMR'","'L'","'0'","'N'"<cr><lf>"K","ipsg","1103","A ","IPVL","'OOS'","'N'","'N'","'MMR'","'L'","'0'","'N'"<cr><lf>"K","mtp2","1104","A ","MTP2","'UNAV'","'N'","'N'","'APF'","'N'","'0'","'N'"<cr><lf>"K","gtwy","1104","B ","MTP2","'OOS'","'N'","'N'","'MMR'","'L'","'0'","'N'"<cr><lf>"K","m3uals","1105","A ","IPVLGW","'OOS'","'N'","'N'","'MMR'","'L'","'0'","'N'"<cr><lf>"K","ssedcm2","1107","A ","IPVLGW","'OOS'","'N'","'N'","'MMR'","'L'","'0'","'N'"<cr><lf>"K","saal","1112","A ","SAAL","'OOS'","'N'","'N'","'MMR'","'L'","'0'","'N'"<cr><lf>"K","gtwy","1104","A1 ","MTP2","'OOS'","'N'","'N'","'MMR'","'L'","'0'","'N'"<cr><lf>
Assuming each data line will be:
4 char status + 13 char LSN + 7 char LOC + 5 char LINK + 12 char LNKTYPE + 7*(6 char data) + 2 =85 chars
For a report of 600 linksets, the typical file size is:
Table 219: Typical File Size: mtcs-link.csv
File Size=Report data+Reportheader+System
header
85,364 bytes=85,000+114+250
LNKSET MTCS Report
Command Examples
• UI
rept-meas:type=mtcs:enttype=lnkset:lsn=ls1201
• FTP
rept-ftp-meas:type=mtcs:enttype=lnkset
365E86977 Revision 1, July 2017
ReportsMeasurements
Measurement Events
Table 220: Maintenance Status Linkset Measurements
UnitDescriptionEvent Name
ACT – link primary state isIS-NR and is or can be used tocarry traffic.
Maintenance StateLKMTCST
UNAV - link has been madeunavailable by local orcentralized maintenancepersonnel (inhibited or canceledlink or active local processoroutage).
OOS – link out-of-service butcan be made available by theSTP.
Number of links in the IS-NR(ACT) state.
Number of currently active links.ACTLINKS
Number of links in theOOS-MT-DSBLD (UNAV) state.
Number of links in theunavailable maintenance state.
UAVLINKS
Number of links in amaintenance state other thanIS-NR and OOS-MT-DSBLD.
Number of out-of-service linksOOSLINKS
statusIndication of Data Validity:STATUS
K indicates good dataI indicates incompleteintervalN indicates data not current
UI Reports
UI Example output:
• Example of rept-meas:type=nm:enttype=lnkset:lsn=xxxx
tekelecstp 12-02-21 04:44:56 EST EAGLE5 44.0.0 TYPE OF REPORT: MAINTENANCE STATUS INDICATORS ON LNKSET REPORT PERIOD: ACTIVE REPORT INTERVAL: 12-02-21, 04:44:56 THROUGH CURRENT
LNKSET-MTCS MEASUREMENTS: gtwy (MTP2)
LSMTCST = 'OOS', ACTLINKS = 0, UAVLINKS = 0, OOSLINKS = 2
;
366E86977 Revision 1, July 2017
ReportsMeasurements
FTP Reports
FTP Example Output File Name: mtcs-lnkset_20101005_2126.csv
FTP Example Output File Format:
"CLLI","SWREL","RPTDATE","RPTIME","TZ","RPTTYPE","RPTPD","IVALDATE","IVALSTART","IVALEND","NUMENTIDS"<cr><lf>"tekelecstp","EAGLE5 44.0.0-64.23.0","2012-02-21","04:45:44","EST ","MAINTENANCE STATUS INDICATORS ON LNKSET","ACTIVE","2012-02-21","04:45:44","04:45:44",7<cr><lf><cr><lf>"STATUS","LSN","LNKTYPE","LSMTCST","ACTLINKS","UAVLINKS","OOSLINKS"<cr><lf>"K","mtp2","MTP2","'UNAV'",0,1,0<cr><lf>"K","ipsg","IPVL","'OOS'",0,0,1<cr><lf>"K","m3uals","IPVL","'OOS'",0,0,1<cr><lf>"K","hcmimt1","MTP2-UNCH","'OOS'",0,0,1<cr><lf>"K","ssedcm2","IPVL","'OOS'",0,0,1<cr><lf>"K","saal","SAAL","'OOS'",0,0,1<cr><lf>"K","gtwy","MTP2","'OOS'",0,0,2<cr><lf>
Assuming each data line will be:
4 char status + 13 char LSN + 9 char LNKTYPE + 4*(6 char data) + 2 = 52 chars
Table 221: Typical File Size: mtcs-lnkset.csv
File Size=Report data+Reportheader+System
header
26,320 bytes=26,000+70+250
367E86977 Revision 1, July 2017
ReportsMeasurements
Glossary
A
ActivateACT
Alignment Error Rate MonitorAERM
AnalyzedInformation QueryAIQ
Name for the local subsystem andservice for the ANSI41 AIQ feature.
American Standard Code forInformation Interchange
ASCII
ATI Number Portability Query(Name of the local subsystem)
ATINPQ
Asynchronous Transfer ModeATM
A packet-oriented transfer modethat uses an asynchronous timedivision multiplexing technique tomultiplex information flow in fixedblocks, called cells.
A high-bandwidth, low-delayswitching, and multiplexingtechnology to support applicationsthat include high-speed data, localarea network interconnection,multimedia application andimaging, and residentialapplications such as videotelephony and otherinformation-based services.
B
Backward Sequence NumberBSN
368E86977 Revision 1, July 2017
C
Called Party Address - The field inthe SCCP portion of the MSU that
CdPA
contains the additional addressinginformation of the destination ofthe MSU. Gateway screening usesthis additional information todetermine if MSUs that contain theDPC in the routing label and thesubsystem number in the calledparty address portion of the MSUare allowed in the network wherethe EAGLE is located.
Calling Party Address - The pointcode and subsystem number that
CgPA
originated the MSU. This pointcode and subsystem number arecontained in the calling partyaddress in the SCCP portion of thesignaling information field of theMSU. Gateway screening uses thisinformation to determine if MSUsthat contain this point code andsubsystem number area allowed inthe network where the EAGLE islocated.
Custom Local Area SignalingService
CLASS
Custom Local Area SubscriberServices
Common Language LocationIdentifier
CLLI
The CLLI uniquely identifies theSTP in terms of its physicallocation. It is usually comprised ofa combination of identifiers for theSTP’s city (or locality), state (orprovince), building, and traffic unitidentity. The format of the CLLI is:
• The first four characters identifythe city, town, or locality
369E86977 Revision 1, July 2017
GlossaryMeasurements
C
• The first character of the CLLImust be an alphabeticalcharacter
• The fifth and sixth charactersidentify state or province
• The seventh and eighthcharacters identify the building
• The last three charactersidentify the traffic unit
Calling Name DeliveryCNAM
An IN (Intelligent Network) servicethat displays the caller’s name onthe calling party’s phone. This issimilar to caller ID except that thecalling party’s name is displayedalong with the calling number orinstead of the calling number.
Changeover OrderCOO
CAM Redundancy ControllerCRC
Cyclic Redundancy Check
A number derived from, and storedor transmitted with, a block of datain order to detect corruption. Byrecalculating the CRC andcomparing it to the value originallytransmitted, the receiver can detectsome types of transmission errors.
Comma-Separated ValuesCSV
The comma-separated value fileformat is a delimited data formatthat has fields separated by thecomma character and recordsseparated by newlines (a newlineis a special character or sequenceof characters signifying the end ofa line of text).
370E86977 Revision 1, July 2017
GlossaryMeasurements
D
DatabaseDB
Daughter BoardDocumentation BulletinData bus
Detailed DesignDD
Directory numberDN
A DN can refer to any mobile orwireline subscriber number, andcan include MSISDN, MDN, MIN,or the wireline Dialed Number.
Destination Point Code - DPCrefers to the scheme in SS7
DPC
signaling to identify the receivingsignaling point. In the SS7 network,the point codes are numericaddresses which uniquely identifyeach signaling point. This pointcode can be adjacent to the EAGLE,but does not have to be.
Database Service Module.DSM
The DSM provides large capacitySCCP/database functionality. TheDSM is an application card thatsupports network specific functionssuch as EAGLE ApplicationProcessor (EPAP), Global Systemfor Mobile Communications(GSM), EAGLE Local NumberPortability (ELAP), and interfaceto Local Service ManagementSystem (LSMS).
Database Transport Access - Afeature in the EAGLE that
DTA
encapsulates specific MSUs into thedata portion of SCCP within a new
371E86977 Revision 1, July 2017
GlossaryMeasurements
D
SS7 MSU and sends the new MSUto the destination using global titletranslation. The EAGLE usesgateway screening to determinewhich MSUs are used by the DTAfeature.
E
Engineering Change OrderECO
Equipment Identity RegisterEIR
A network entity used in GSMnetworks, as defined in the 3GPPSpecifications for mobile networks.The entity stores lists ofInternational Mobile EquipmentIdentity (IMEI) numbers, whichcorrespond to physical handsets(not subscribers). Use of the EIRcan prevent the use of stolenhandsets because the networkoperator can enter the IMEI of thesehandsets into a 'blacklist' andprevent them from being registeredon the network, thus making themuseless.
Exception List Exclusion IndicatorELEI
Indicates whether entries made tothe exception list for each clusterpoint code are added to or changedin the destination point code table.
TElephone NUmber Mapping - Atechnology for unifying various
ENUM
communications and telephoneaddresses for private and businessnumbers, facsimile and mobilephone numbers, SMS services,Instant Messaging and email.ENUM integrates legacy phonenumbers with the Domain NameSystem (DNS). Users can access
372E86977 Revision 1, July 2017
GlossaryMeasurements
E
and maintain a directory thatsupports all forms of wiredcommunication, mobilecommunications networks, and theInternet. ENUM allows for an enduser to be reached on multipledevices via one phone number andallows the end user to determinewhich device to contact first ormultiple devices simultaneously.E.164 Number Mapping
F
Forward Indicator BitFIB
Flexible Linkset Optional BasedRouting
FLOBR
A feature that provides thecapability to fully customize thedesired routing translation. Whenflexible routing is used, the routingtranslation can cascade from oneGTT translation table to any otherGTT translation table.
File Transfer ProtocolFTP
A client-server protocol that allowsa user on one computer to transferfiles to and from another computerover a TCP/IP network.
Feature Test Plan
G
GSM Flexible numberingG-Flex
A feature that allows the operatorto flexibly assign individualsubscribers across multiple HLRsand route signaling messages,based on subscriber numbering,accordingly.
373E86977 Revision 1, July 2017
GlossaryMeasurements
G
GSM Mobile Number PortabilityG-Port
A feature that provides mobilesubscribers the ability to changethe GSM subscription networkwithin a portability cluster, whileretaining their original MSISDN(s).
Global System for MobileCommunications
GSM
A second generation digital PCSmobile phone standard used inmany parts of the world.
Global Title AddressGTA
Global Title IndicatorGTI
Global Title TranslationGTT
A feature of the signalingconnection control part (SCCP) ofthe SS7 protocol that the EAGLEuses to determine which servicedatabase to send the query messagewhen an MSU enters the EAGLEand more information is needed toroute the MSU. These servicedatabases also verify calling cardnumbers and credit card numbers.The service databases are identifiedin the SS7 network by a point codeand a subsystem number.
H
Human-to-Machine InterfaceHMI
High-Speed LinkHSL
An innovative distributed I/Otechnology designed forautomation applications that is
374E86977 Revision 1, July 2017
GlossaryMeasurements
H
based on an open standard RS-422,which is designed forfull/half-duplex, multi-drop serialtransmission.
I
Initial Address MessageIAM
Ensures the services offered arecompatible with the receptiondevices, and can be used. Forexample, IAM prevents a phonebeing connected to a facsimile.
Initial Detection PointIDP
Service for the Prepaid IDP QueryRelay feature.
IDPR
International Mobile EquipmentIdentifier
IMEI
International Mobile SubscriberIdentity
IMSI
International Mobile StationIdentityA unique internal network IDidentifying a mobile subscriber.
Inter-Module-TransportIMT
The communication software thatoperates theinter-module-transport bus on allcards except the LIMATM, DCM,DSM, and HMUX.
Intelligent Network ApplicationPart
INAP
375E86977 Revision 1, July 2017
GlossaryMeasurements
I
A standardized interface forintelligent networks (IN). Thisinterface allows Service Providersto offer their own services.
INAP-based Number PortabilityINP
INP can be deployed as astand-alone or an integrated signaltransfer point/number portabilitysolution. With a stand-alone NPserver, no network reconfigurationis required to implement numberportability. The NP server deliversa much greater signaling capabilitythan the conventional SCP-basedapproach.
Intelligent Network (IN) Portability
Intelligent PeripheralIP
Internet Protocol - IP specifies theformat of packets, also calleddatagrams, and the addressingscheme. The network layer for theTCP/IP protocol suite widely usedon Ethernet networks, defined inSTD 5, RFC 791. IP is aconnectionless, best-effort packetswitching protocol. It providespacket routing, fragmentation andre-assembly through the data linklayer.
The location of a device on aTCP/IP network. The IP Address
IP Address
is either a number in dotteddecimal notation which lookssomething like (IPv4), or a 128-bithexadecimal string such as (IPv6).
IP Services ModuleIPSM
A card that provides an IPconnection for the IPUI (Telnet)
376E86977 Revision 1, July 2017
GlossaryMeasurements
I
and FTP-based Table Retrievefeatures. The IPSM is a GPSM-IIcard with a one Gigabyte (UD1G)expansion memory board in asingle-slot assembly running theIPS application.
Interim Standard 41IS-41
Same as and interchangeable withANSI-41. A standard foridentifying and authenticatingusers, and routing calls on mobilephone networks. The standard alsodefines how users are identifiedand calls are routed when roamingacross different networks.
In Service - AbnormalIS-ANR
The entity is in service but onlyable to perform a limited subset ofits normal service functions.
In Service - NormalIS-NR
ISDN User PartISDNUP
ISDN User PartISUP
The ISDN-specific part of thetransmission with additionalinformation via a signaling channelbetween exchanges.
Inter-switch Voice MessagingISVM
International TelecommunicationsUnion
ITU
An organization that operatesworldwide to allow governments
377E86977 Revision 1, July 2017
GlossaryMeasurements
I
and the privatetelecommunications sector tocoordinate the deployment andoperating of telecommunicationsnetworks and services. The ITU isresponsible for regulating,coordinating and developinginternational telecommunications,and for harmonizing nationalpolitical interests.
L
Line Information DatabaseLIDB
Link Interface ModuleLIM
Provides access to remote SS7, IP,and other network elements suchas a Signaling Control Point (SCP)through a variety of signalinginterfaces (DS0, MPL, E1/T1 MIM,LIM-ATM, E1-ATM, IPLIMx,IPGWx). The LIMs consist of amain assembly and possibly, aninterface appliqué board. Theseappliqués provide level one andsome level two functionality on SS7signaling links.
Signaling LinkLink
Carries signaling within a Link Setusing a specific Association. A Linkcan belong to only one Link Set andone Association. There is generallyone Link per Association in a LinkSet.
Local Number PortabilityLNP
The ability of subscribers to switchlocal or wireless carriers and stillretain the same phone number.
378E86977 Revision 1, July 2017
GlossaryMeasurements
L
LNP Query ServiceLNPQS
Location Request MessageLOCREQ
A TDMA/CDMA MSC query toan HLR for retrievingsubscription/location informationabout a subscriber to terminate avoice call.
Location Routing NumberLRN
A 10-digit number in a databasecalled a Service Control Point (SCP)that identifies a switching port fora local telephone exchange. LRN isa technique for providing LocalNumber Portability.
Link Set NameLSN
The name of the link set.
Link Status Signaling UnitLSSU
M
Mated Application PartMAP
Mobile Application Part
An application part in SS7signaling for mobilecommunications systems.
Measurement Collection andPolling Module
MCPM
Provides comma delimited coreSTP measurement data to a remoteserver for processing. The MCPMis either an EDSM with 2 GB ofmemory or an E5-MCPM-B cardrunning the MCP application.
379E86977 Revision 1, July 2017
GlossaryMeasurements
M
A feature that supports the EAGLEbeyond 700 links by providing a
Measurement Platform
dedicated processor for collectingand reporting Measurements data.The Measurement Platformcollection function cannot bedisabled once it is enabled in thesystem.
Measurement PlatformMP
Message Processor - The role of theMessage Processor is to provide theapplication messaging protocolinterfaces and processing.However, these servers also haveOAM components. All MessageProcessors replicate from theirSignaling OAM's database andgenerate faults to a FaultManagement System.
Message RelayMR
Mobile Switching CenterMSC
An intelligent switching system inGSM networks. This systemestablishes connections betweenmobile communicationssubscribers.The primary service delivery nodefor GSM/CDMA, responsible forrouting voice calls and SMS as wellas other services (such asconference calls, FAX and circuitswitched data).
Mobile Station InternationalSubscriber Directory Number
MSISDN
Mobile Subscriber IntegratedServices Digital Network [Number]The MSISDN is the networkspecific subscriber number of amobile communications subscriber.
380E86977 Revision 1, July 2017
GlossaryMeasurements
M
This is normally the phone numberthat is used to reach the subscriber.The unique, network-specificsubscriber number of a mobilecommunications subscriber.MSISDN follows the E.164numbering plan; that is, normallythe MSISDN is the phone numberthat is used to reach the subscriber.
Message Signal UnitMSU
The SS7 message that is sentbetween signaling points in the SS7network with the necessaryinformation to get the message toits destination and allow thesignaling points in the network toset up either a voice or dataconnection between themselves.The message contains the followinginformation:
• The forward and backwardsequence numbers assigned tothe message which indicate theposition of the message in thetraffic stream in relation to theother messages.
• The length indicator whichindicates the number of bytesthe message contains.
• The type of message and thepriority of the message in thesignaling information octet ofthe message.
• The routing information for themessage, shown in the routinglabel of the message, with theidentification of the node thatsent message (originating pointcode), the identification of thenode receiving the message(destination point code), and thesignaling link selector which theEAGLE uses to pick which linkset and signaling link to use toroute the message.
381E86977 Revision 1, July 2017
GlossaryMeasurements
M
Message Transfer PartMTP
The levels 1, 2, and 3 of the SS7protocol that control all thefunctions necessary to route an SS7MSU through the network
Module Test Plan
N
Nature of Address IndicatorNAI
Standard method of identifyingusers who request access to anetwork.
Network Access Identifier
The user identity submitted by theclient during networkauthentication.
NAI ValueNAIV
Network ClusterNC
Network CodeNot CompliantNorth Carolina
Network IndicatorNI
Network ManagementNM
The execution of the set offunctions required for controlling,planning, allocating, deploying,coordinating and monitoring theresources of a telecommunicationsnetwork, including performingfunctions such as initial networkplanning, frequency allocation,predetermined traffic routing tosupport load balancing,cryptographic key distributionauthorization, configuration
382E86977 Revision 1, July 2017
GlossaryMeasurements
N
management, fault management,security management, performancemanagement, and accountingmanagement. Note: Networkmanagement does not includeuser-terminal equipment.Notification manager
Number PlanNP
Numbering PlanNumber PortabilityA capability that permitstelecommunications users tomaintain the same telephone accessnumber as they changetelecommunication suppliers.
Number Plan AreaNPA
The North American “AreaCodes.” (3 digits: 2- to-9, 0 or 1,0-to-9. Middle digit to expandsoon).
Numbering Plan ProcessorNPP
Provides the flexible serviceapplication behavior that satisfiesthe needs of customers resident incomplex signaling networks. It isused for number conditioning,RTDB lookup, and outgoingnumber formatting.
Numbering Plan ValueNPV
Central Office Exchange CodeNXX
O
Operations, Administration, andMaintenance. These functions are
OAM
generally managed by individual
383E86977 Revision 1, July 2017
GlossaryMeasurements
O
applications and not managed bya platform managementapplication, such as PM&C.
Operations – Monitoring theenvironment, detecting anddetermining faults, and alertingadministrators.
Administration – Typicallyinvolves collecting performancestatistics, accounting data for thepurpose of billing, capacityplanning, using usage data, andmaintaining system reliability.
Maintenance – Provides suchfunctions as upgrades, fixes, newfeature enablement, backup andrestore tasks, and monitoringmedia health (for example,diagnostics).
Out of ServiceOOS
Within an SS7 network, the pointcodes are numeric addresses which
OPC
uniquely identify each signalingpoint. The OPC identifies thesending signaling point.
P
Point CodePC
The identifier of a signaling pointor service control point in anetwork. The format of the pointcode can be one of the followingtypes:
• ANSI point codes in the formatnetwork indicator-networkcluster-network cluster member(ni-nc-ncm).
• Non-ANSI domestic point codesin the format networkindicator-network
384E86977 Revision 1, July 2017
GlossaryMeasurements
P
cluster-network cluster member(ni-nc-ncm).
• Cluster point codes in theformat networkindicator-network cluster-* ornetwork indicator-*-*.
• ITU international point codesin the format zone-area-id.
• ITU national point codes in theformat of a 5-digit number(nnnnn), or 2, 3, or 4 numbers(members) separated by dashes(m1-m2-m3-m4) as defined bythe Flexible Point Code systemoption. A group code isrequired (m1-m2-m3-m4-gc)when the ITUDUPPC feature isturned on.
• 24-bit ITU national point codesin the format main signalingarea-subsignaling area-servicepoint (msa-ssa-sp).
Preventive Cyclic RetransmissionPCR
A method of error correction usedfor the SS7 protocol. PCR is anerror correction method that keepsa copy of each message signal unittransmitted on a signaling link ina retransmission buffer. Ifthereceiving end of the signalinglink receives the MSU with noerrors, positive acknowledgmentmessage is sent to the transmittingend of the signaling link. The MSUis then discarded from theretransmission buffer. If thetransmitting end of the signalinglink does not receive positiveacknowledgment from thereceiving end of the signaling link,the MSU is retransmitted untilpositive acknowledgment isreceived. The PCR error correctionmethod is assigned to SS7 signaling
385E86977 Revision 1, July 2017
GlossaryMeasurements
P
links using the ent-slkcommand.
Q
Query ServerQS
Query Service
R
Random Access MemoryRAM
A type of computer memory thatcan be accessed randomly; that is,any byte of memory can beaccessed without touching thepreceding bytes.
Routing NumberRN
The number provided by theFreephone Service Provider (FSP)to the Access Service Provider(ASP) to enable a pre-determinedrouting of traffic to a specificnetwork/carrier/customer.
A signaling path from an LSP to anRSP using a specified Link Set.
Route
Route Set TestRST
Route Set Prohibited Test (Msg)
Signaling-route-set-test signal forprohibited destination.
Real Time DatabaseRTDB
S
Supervisory Audio ToneSAT
386E86977 Revision 1, July 2017
GlossaryMeasurements
S
Signaling Connection Control PartSCCP
The signaling connection controlpart with additional functions forthe Message Transfer Part (MTP)in SS7 signaling. Messages can betransmitted between arbitrarynodes in the signaling networkusing a connection-oriented orconnectionless approach.
Signaling Engineering andAdministration System
SEAS
An interface defined by Bellcoreand used by the Regional BellOperating Companies (RBOCs), aswell as other Bellcore ClientCompanies (BCCs), to remotelyadminister and monitor thesignaling points in their networkfrom a central location.
Service Information FieldSIF
MTP Service Information Field isthe payload field of an SS7 MSUheader. The first byte of the SIF isthe start of the MTP3 routing label.For MTP3-variant networks, themaximum SIF size is 272 bytes. ForMTP3b-variant networks, themaximum SIF size is 4095 bytes.
The transmission path connectingthe EAGLE to other signaling
Signaling Link
points in the network andproviding access to ANSI SS7 andITU SS7 network elements. Thesignaling link is connected to theEAGLE at the link interface module(LIM).
Service Information OctetSIO
387E86977 Revision 1, July 2017
GlossaryMeasurements
S
The network indicator code (NIC),priority (PRI), and service indicator(SI) in the SIO field in the messagesignaling unit (MSU). Thisinformation identifies the type ofMSU (ISUP, TCAP, and so forth)that is allowed in the networkwhere the EAGLE is located.
Session Initiation ProtocolSIP
A peer-to-peer protocol used forvoice and video communications.
Signaling Link CodeSLC
Signaling Link TestAcknowledgment
SLTA
Short Message ServiceSMS
A communication servicecomponent of the GSM mobilecommunication system that usesstandard communicationsprotocols to exchange short textmessages between mobile phonedevices. See also GSM.
Shared Metric Service
Service ProviderSP
Signaling Point
A set of signaling equipmentrepresented by a unique point codewithin an SS7 domain.
Send Routing InformationSRI
Send_Route_Information Message
388E86977 Revision 1, July 2017
GlossaryMeasurements
S
SubsystemSS
Supplementary Services
Signaling System #7SS7
A communications protocol thatallows signaling points in anetwork to send messages to eachother so that voice and dataconnections can be set up betweenthese signaling points. Thesemessages are sent over its ownnetwork and not over the revenueproducing voice and data paths.The EAGLE is an STP, which is adevice that routes these messagesthrough the network.
Subsystem AllowedSSA
Service Specific ConnectionOriented Protocol.
SSCOP
The primary task of the SSCOP(Service Specific ConnectionOriented Protocol) is to provideassured data delivery betweenAAL connection endpoints.Breaking the SSCS into 2 sublayersallows a common connectionoriented protocol with errorrecovery (the SSCOP) to provide ageneric reliable data transferservice for different AAL interfacesdefined by different SSCF layers.
SS7 Subsystem NumberSSN
The subsystem number of a givenpoint code. The subsystem numberidentifies the SCP application thatshould receive the message, or thesubsystem number of thedestination point code to be
389E86977 Revision 1, July 2017
GlossaryMeasurements
S
assigned to the LNP subsystem ofthe EAGLE.
Subsystem Number
A value of the routing indicatorportion of the global titletranslation data commandsindicating that no further globaltitle translation is required for thespecified entry.
Subsystem Number
Used to update the CdPA.
Subsystem Prohibited networkmanagement message
SSP
Subsystem Prohibited SCCP(SCMG) management message.(CER)Service Switching Point (SS7Network)Signal Switching PointSignal Switching Points areswitches that originate, terminate,or tandem calls. An SSP sendssignaling messages to other SSPsto setup, manage, and release voicecircuits required to complete a call.
Secondary StateSST
The secondary state of the specifiedentity.
Subsystem Status Test
Subsystem Status Test networkmanagement message.
Subsystem Status Test SCCP(SCMG) management message.(CER)
Signal Transfer PointSTP
390E86977 Revision 1, July 2017
GlossaryMeasurements
S
The STP is a special high-speedswitch for signaling messages inSS7 networks. The STP routes coreINAP communication between theService Switching Point (SSP) andthe Service Control Point (SCP)over the network.
Spanning Tree Protocol
Signaling Transfer Point Local AreaNetwork
STPLAN
The application used by the SLANcard and E5-SLAN card to supportthe STP LAN feature. Thisapplication does not support 24-bitITU-N point codes.
Signal Unit Error Rate MonitorSUERM
T
Transmission Level 1T1
A T1 interface terminates ordistributes T1 facility signals forthe purpose of processing the SS7signaling links carried by the E1carrier.
A leased-line connection capableof carrying data at 1,544,000bits-per-second.
Transfer Cluster AllowedTCA
Transaction CapabilitiesApplication Part
TCAP
A protocol in the SS7 protocol suitethat enables the deployment ofadvanced intelligent networkservices by supporting non-circuitrelated information exchangebetween signaling points using the
391E86977 Revision 1, July 2017
GlossaryMeasurements
T
Signaling Connection Control Partconnectionless service. TCAP alsosupports remote control - ability toinvoke features in another remotenetwork switch.
Transfer-Cluster-ProhibitedTCP
Transfer Control Protocol
Transmission Control Protocol
A connection-oriented protocolused by applications on networkedhosts to connect to one another andto exchange streams of data in areliable and in-order manner.
Transmission ControlProtocol/Internet Protocol
TCP/IP
Transfer Cluster RestrictedTCR
TransFer Allowed (Msg)TFA
Transfer ControlTFC
TransFer Controlled (Msg)Transfer Congested
TransFer Prohibited (Msg)TFP
A procedure included in thesignaling route management(functionality) used to inform asignaling point of the unavailabilityof a signaling route.
Transfer RestrictedTFR
Traffic Restarting AllowedTRA
392E86977 Revision 1, July 2017
GlossaryMeasurements
T
See TT.Translation Type
Traffic Restarting WaitingTRW
Translation TypeTT
Resides in the Called Party Address(CdPA) field of the MSU anddetermines which service databaseis to receive query messages. Thetranslation type indicates whichGlobal Title Translation tabledetermines the routing to aparticular service database.
U
ETF User Adaptation LayersUA
User Agent
User InterfaceUI
V
Voicemail Flexible RoutingV-Flex
An advanced database applicationbased on the industry provenEAGLE. Deployed as a localsubsystem on the EAGLE platform,V-Flex centralizes voicemailrouting.
W
Wireless Short Message ServiceCenter
WSMSC
393E86977 Revision 1, July 2017
GlossaryMeasurements