optionscatalogue single drums 40 00-en

8/18/2019 OptionsCatalogue Single Drums 40 00-En

1/56

OPTIONAL EQUIPMENTAND FIELD KITS

SINGLE DRUM ROLLERS -40

VP 04/2006 PRE 200102


2/56

Single drum rollers -40Date:Page:

19.06.20062

VP/DJ [OptionsCatalogue_Single_drums_40_00-en.doc] 19.06.2006

Notes / Legend

Factory kit (ZA): Factory assembled kit. Parts in the standard machine may be deletedhere, the price reduction for these deleted parts is included in the

total price of the optional equipment.

Field installation kit (NS): Ready to install in the field. The kit contains all necessary drawingsand assembly instructions. Assembly parts which may be deleted,can not be credited.


3/56


19.06.20063


Table of content

1 BASIC MACHINE 5

1.1 Option: Operator's platform with railing (FS10) 51.2 Option: Sun roof (S3) 61.3 Option: ROPS / FOPS (S5) 71.4 Option: Machine tools (WE1) 81.5 Option: ROPS cabin with working lights and heating (S21) 101.6 Option: ROPS cabin with working lights and heat-air conditioning module (S31) 121.7 Option: Heat - Air conditioning (K3) 13

2 LIGHTS 14

2.1 Standard: Lights for single drum rollers with cabin 142.2 Option: Working lights for ROPS and sun roof (E1) 152.3 Option: Lights for road traffic (E2) 162.4 Option: Lights for railing (E24) 17

3 SEATS 18

3.1 Standard: Standard seat 183.2 Option: Comfort seat (FS2) 19

4 ADDITIONAL CABIN EQUIPMENT 20

4.1 Option: Radio (E21) 204.2 Option: Rotary beacon (E16) 214.3 Option: Rotary beacon with magnet (E31) 22

5 ADDITIONAL GAUGES 23

5.1 Standard: Round instrument 235.2 Option: Vibration frequency gauge (AZ10) 255.3 Option: Tachograph (AZ12) 265.4 Option: Voltmeter (AZ15) 275.5 Option: Engine speed gauge (AZ5) 285.6 Option: Speedometer (AZ9) 29

6 MEASUREMENT TECHNIQUE 30

6.1 Option: BOMAG Evib meter (BEM) (VM8) 30

6.2 Option: BOMAG Terrameter plus (BTM plus) (VM9) 316.3 Option: Printer (VM10) 326.4 Option: BOMAG Terrameter professional (BTM prof) (VM11) 336.5 Option: BOMAG Compaction Management (BCM 05) (VM12) 346.6 Option: Preparation BCM 05 for BEM (VM17) 356.7 Option: Preparation BCM 05 - Holder, Interface but without PC (VM19) 36

7 DRUM / SCRAPER / FRAMES 37

7.1 Option: Padfoot segment shell (B5) 377.2 Option: 35 mm drum (B3) 387.3 Option: Additional weight (J3) 397.4 Option: Additional weight (J15) 40

7.5 Option: Higher amplitude drum (V3) 417.6 Option: Higher amplitude (V8) 427.7 Option: Plastic contact scrapers (Q7) 43


4/56


19.06.20064


8 TYRES 44

8.1 Standard: Diamond tread tyres 448.2 Option: Tractor tread tyres (T6) 458.3 Option: Tyre ballast (T28) 46

9 BIO OIL 47

9.1 Option: Bio-degradable hydraulic oil (HY2) 47

10 SPECIAL PAINT AND NOISE INSULATION 48

10.1 Option: Special paint yellow parts (SL9) 4810.2 Option: Special paint complete (SL10) 4910.3 Option: Special paint cabin (SL3) 5010.4 Option: Dual colour special paint (SL5) 51

11 TOOLS / SPECIAL EQUIPMENT 52

11.1 Option: Towing hitch front (A2) 5211.2 Option: Fire distinguisher (FL2) 5311.3 Option: Machine tools Torx (WE2) 5411.4 Option: Electronical anti-theft device (FS27) 5511.5 Option: Winter package (M35) 56


5/56


19.06.20065


1 Basic machine1.1 Option: Operator's platform with railing (FS10)

Seite: 1/1 (ID: 135)

Operator's platform with railing

ZA NSBW 211 D-40 582 001 30 -BW 211 PD-40 582 001 30 -BW 212 D-40 582 001 30 -BW 212 PD-40 582 001 30 -BW 213 D-40 582 001 30 -BW 213 PD-40 582 001 30 -

Order references:Minimum standard for single drum rollers: Railing (FS10) (option is necessary for single drum roller if no

cabin S21 or S31 and/or ROPS/FOPS is desired).For field kit, order of sun roof (NS S3) is obligatory.

Scope of delivery:1 railing for operator platform1 vandalism protection for the control elements (plastics)1 rigid steering column1 seat (design see chapter operator seats)for working lights order option E24 (see picture)Round instrument for controls and warning indicators (details see chapter indicators)Mechanical travel lever

T e m p l a t e : 1 - 1 -

1


6/56


19.06.20066


1 Basic machine1.2 Option: Sun roof (S3)

Seite: 1/1 (ID: 136)

Sun roof

ZA NSBW 211 D-40 - 582 020 40BW 211 PD-40 - 582 020 40BW 212 D-40 - 582 020 40BW 212 PD-40 - 582 020 40BW 213 D-40 - 582 020 40BW 213 PD-40 - 582 020 40

Order references:With delivery ex works, also order as field kit (NS S3), the order of the option railing (ZA FS10) is

obligatory.

Weight distribution:Total: + 160 kgDrum: + 60 kgWheels: + 100 kg

Scope of delivery:Sun roof on two sectional steel supports

T e m p l a t e : 1 - 1 -

1


7/56


19.06.20067


1 Basic machine1.3 Option: ROPS / FOPS (S5)

Seite: 1/1 (ID: 137)

ROPS / FOPS


Explanations:ROPS - Roll Over Protection Structure

FOPS - Falling Object Protective Structure


Scope of delivery optional equipment ZA:Railing FS10Two sectional steel supportsFOPS protection roof Sun roof made of steel plate

T e m p l a t e : 1 - 1 -

1


8/56


19.06.20068


1 Basic machine1.4 Option: Machine tools (WE1)

Seite: 1/2 (ID: 182)

Machine tools


Explanations:The tool set is prepared for the recommended maintenance works. The tool set is stored in a shelf

behind the seat. This sehlf has a lockable lid on single drum rollers with railing and sun roof or ROPS /FOPS. This option is only available as field kit.

T e m p l a t e : 1 - 1 -

1


9/56


19.06.20069


1 Basic machine1.4 Option: Machine tools (WE1)

Seite: 2/2 (ID: 182)

Content of the tool set:

1 tool bag1 cranked double ring spanner 11x131 cranked double ring spanner 17x191 x double spanner 8x10 DIN 8951 x double spanner 14x17 DIN 8951 x double spanner 19x22 DIN 8951 x double spanner 30x32 DIN 8951 x allen key 5 DIN 9111 x allen key 6 DIN 9111 x allen key 8 DIN 9111 x allen key 10 DIN 9111 x allen key 14 DIN 9111 x screw driver A 0,8x5,5 DIN 5265

1 x screw driver A 1,6x10 DIN 5265

Machine tools


T e m p l a t e : 1 - 1 -

2


10/56


19.06.200610


1 Basic machine1.5 Option: ROPS cabin with working lights and heating (S21)

Seite: 1/2 (ID: 138)

ROPS cabin with workinglights and heating

ZA NSBW 211 D-40 582 001 04 582 020 48BW 211 PD-40 582 001 64 582 020 48BW 212 D-40 582 001 04 582 020 48BW 212 PD-40 582 001 64 582 020 48BW 213 D-40 582 001 04 582 020 48BW 213 PD-40 582 001 64 582 020 48

Explanations:ROPS - Roll Over Protection Structure

Order references:If cabin is desired with air conditioning, please order option S31.


T e m p l a t e : 1 - 1 -

1


11/56


19.06.200611


1 Basic machine1.5 Option: ROPS cabin with working lights and heating (S21)

Seite: 2/2 (ID: 138)

Scope of delivery optional equipment ZA:

ROPS structureSafety belt2 large outside mirrorsWindshield wipers and windshield washer system in front and in rear Working lights 2x in front and 2x in rear Various deposit and storage areasTank for windshield washer systemSafety glassVentilator with infinite variable blower Heater with engine cooling water Electrical window heating for rear windowInterior lining

ROPS cabin with workinglights and heating


T e m p l a t e : 1 - 1 -

2


12/56


19.06.200612


1 Basic machine1.6 Option: ROPS cabin with working lights and heat-air conditioning module (S31)

Seite: 1/1 (ID: 139)

Explanations:

ROPS - Roll Over Protection Structure

Order references:If cabin is requested only with heating, please order option S21.

Weight distribution:Total: + 520 kgDrum: + 170 kgWheels: + 350 kgScope of delivery optional equipment ZA:Heat-air condition moduleROPS structureSafety belt

2 large outside mirrorsWindshield wipers and windshield washer system in front and in rear Working lights 2x in front and 2x in rear Various deposit and storage areasTank for windshield washer systemSafety glassVentilator with infinite variable blower Heater with engine cooling water Electrical window heating for rear windowInterior lining

ROPS cabin with workinglights and heat-air conditioning

module


T e m p l a t e : 1 - 1 -

1


13/56


19.06.200613


1 Basic machine1.7 Option: Heat - Air conditioning (K3)

Seite: 1/1 (ID: 140)

Explanations:

Field kit for single drum rollers with cabin and heating (ZA S21)

Scope of delivery optional equipment ZA:Complete heat-air module

Heat - Air conditioning


T e m p l a t e : 1 - 1 -

1


14/56


19.06.200614


2 Lights2.1 Standard: Lights for single drum rollers with cabin

(ID: 142)

Standard for single drum rollers with cabin(S21 and S31)

Scope of delivery:2 headlights in front2 headlights in rear

Lights for single drum rollerswith cabin

ZA NSBW 211 D-40 - -BW 211 PD-40 - -BW 212 D-40 - -BW 212 PD-40 - -BW 213 D-40 - -BW 213 PD-40 - -

T e m p l a t e : 4 - 1 -

1


15/56


19.06.200615


2 Lights2.2 Option: Working lights for ROPS and sun roof (E1)

Seite: 1/1 (ID: 143)

Working lights for ROPS andsun roof


Order references:For sun roof please order the option: Lights for railing (E24) or field kit : Working lights (NS E1)

Scope of delivery:2 headlights in front2 headlights in rear

T e m p l a t e : 1 - 1 -

1


16/56


19.06.200616


2 Lights2.3 Option: Lights for road traffic (E2)

(ID: 144)

Explanations:Lighting is required for driving the rollersin public road traffic. The lights are mounted onthe rear frame or the cabin. All necessary

controls are integrated in the instrument panel.

Scope of delivery:2 head lights white, in front2 rear lights red, in rear 4 indicator lights red, in front and rear withwarning light function2 reflectors

Lights for road traffic


T e m p l a t e : 4 - 1 -

1


17/56


19.06.200617


2 Lights2.4 Option: Lights for railing (E24)

Seite: 1/1 (ID: 145)

Lights for railing


Explanations:Lights are mounted to the railing.

Order references:The option E24 is only available for single drum rollers with only railing (FS10) or sun roof (NS S3).

Scope of delivery:2 headlights in front2 tail lights, in rear

T e m p l a t e : 1 - 1 -

1


18/56


19.06.200618


3 Seats3.1 Standard: Standard seat

Seite: 1/1 (ID: 168)

Standard seat

ZA NSBW 211 D-40 - -BW 211 PD-40 - -BW 211 PD-40 - -BW 212 D-40 - -BW 213 D-40 - -BW 213 PD-40 - -

Explanations:Standard seat with leatherette seat cover

Valid for machines with railing, sun roof, ROPS/FOPS and ROPS cabin

Adjustments: Adjustable to weight (3 step)Backrest infinitely adjustableSlideable to front and rear Black weather proof leatherette cover

T e m p l a t e : 1 - 1 -

1


19/56


19.06.200619


3 Seats3.2 Option: Comfort seat (FS2)

Seite: 1/1 (ID: 169)

Comfort seat


Explanations:Comfort seat with leatherette seat cover for single drum rollers with ROPS/FOPS and sun roof or only

railing. Comfort seat with textile seat cover for single drum rollers with ROPS cabin S21 or S31.

Adjustments: Adjustable to weight (3 step)Slideable to front and rear Backrest extensionBackrest infinitely adjustable Arm rest on both sides Adapter +/- 20°

T e m p l a t e : 1 - 1 -

1


20/56


19.06.200620


4 Additional cabin equipment4.1 Option: Radio (E21)

Seite: 1/1 (ID: 146)

Radio


Explanations:CD radio in standard pit

Drive is vibration-proof

Order references:Only for single drum rollers with cabin

Scope of delivery:CD radio in standard pit Antenna2 speakers

T e m p l a t e : 1 - 1 -

1


21/56


19.06.200621


4 Additional cabin equipment4.2 Option: Rotary beacon (E16)

Seite: 1/1 (ID: 147)

Rotary beacon


Explanations:Rotary beacon on left side of cabin

Colour: orangeConnection base is standard for all ROPS cabins S21 and S31Only available as field kitRotary beacon is packed and added to the machine

Order references:Only for single drum rollers with S21 and S31For single drum rollers with sun roof (S3) and ROPS-FOPS (S5) please order E31!

Scope of delivery:Rotary beacon with standard connection

T e m p l a t e : 1 - 1 -

1


22/56


19.06.200622


4 Additional cabin equipment4.3 Option: Rotary beacon with magnet (E31)

Seite: 1/1 (ID: 148)

Rotary beacon with magnet


Explanations:Rotary beacon with magnet for single drum rollers with railing (FS10), sun roof (S3) and ROPS/FOPS

(S5).Option is only available as field kit.Colour: orangeConnection via 12 V plug

T e m p l a t e : 1 - 1 -

1


23/56


19.06.200623


5 Additional gauges5.1 Standard: Round instrument

Seite: 1/2 (ID: 151)

Round instrument


Standard for D/PD-40 single drum rollers

T e m p l a t e : 1 - 1 -

1


24/56


19.06.200624


5 Additional gauges5.1 Standard: Round instrument

Seite: 2/2 (ID: 151)

Explanations:

Round instrument with following gauges

Machines D/PD-40 D/PD-40

Gauges in the round instrument Standard packageSingle options

(max. 3. pcs)

Analogue gauges

Fuel capacity x

Engine rated speed AZ5

Speedometer AZ9

Operating hour meter x

Frequency gauge AZ10

Voltmeter AZ15

Warning lights

Brake x

Engine oil pressure x

Engine oil temperature x

Engine air filter indication in engine

compartment

Cooling agent levelindication in engine

compartment

Hydraulic oil filter indication in enginecompartment

Water separator diesel filter x

Generator load control x

Pre-heat engine x

Reference lights

Warning signal E2

Direction indicator E2

Round instrument


T e m p l a t e : 1 - 1 -

2


25/56


19.06.200625


5 Additional gauges5.2 Option: Vibration frequency gauge (AZ10)

Seite: 1/1 (ID: 152)

Explanations:

Analogue gauge of vibration frequencyMeasurement range: 0-50 HzMeasurement range: 0-3000 min-1

Vibration frequency gauge


T e m p l a t e : 1 - 1 -

1


26/56


19.06.200626


5 Additional gauges5.3 Option: Tachograph (AZ12)

(ID: 153)

Explanations:The tachograph indicates the vibrationfrequency and the travel speed and records the

values on a tacho disc. In France and incountries with French construction regulationthe tachograph is required. The option ismounted in the roof console in a standard pit.

Tachograph


T e m p l a t e : 4 - 1 -

1


27/56


19.06.200627


5 Additional gauges5.4 Option: Voltmeter (AZ15)

Seite: 1/1 (ID: 154)

Explanations:

Analogue voltmeter for battery voltageMeasurement range: 8-16 V

Voltmeter


T e m p l a t e : 1 - 1 -

1


28/56


19.06.200628


5 Additional gauges5.5 Option: Engine speed gauge (AZ5)

Seite: 1/1 (ID: 155)

Explanations:

Analogue gauge for engine rated speedMeasurement range: 0-4000 m-1

Engine speed gauge


T e m p l a t e : 1 - 1 -

1


29/56


19.06.200629


5 Additional gauges5.6 Option: Speedometer (AZ9)

Seite: 1/1 (ID: 156)

Explanations:

Analogue gauge of travel speedMeasurement range: 0-13 km/h, 0-8 miles/h

Speedometer


T e m p l a t e : 1 - 1 -

1


30/56


19.06.200630


6 Measurement technique6.1 Option: BOMAG Evib meter (BEM) (VM8)

Seite: 1/1 (ID: 170)

BOMAG Evib meter (BEM)


Explanations:Permanent indication of Evib values. Depending on the various soils, dynamic bearing capacities

between 0 and 350 MN/m² can be indicated.

Components:2 acceleration transducers1 electronic unit1 analogue display (EVIB-values)

T e m p l a t e : 1 - 1 -

1


31/56


19.06.200631


6 Measurement technique6.2 Option: BOMAG Terrameter plus (BTM plus) (VM9)

Seite: 1/1 (ID: 171)

BOMAG Terrameter plus(BTM plus)


Explanations:This measuring system controls and documents the compaction process. The measurement size which

is determined and indicated, is the Evib-value in MN/m². Also, the roller operator is informed by a redlight which indicates the end of compaction or that the max. compaction on a determined track has beenachieved.

Components:2 acceleration transducers1 speed transducer 1 electronic unit1 BOMAG Operating Panel (BOP)

T e m p l a t e : 1 - 1 -

1


32/56


19.06.200632


6 Measurement technique6.3 Option: Printer (VM10)

Seite: 1/1 (ID: 172)

Printer


Explanations:Printer for BTM plus. The achieved compaction results can be printed with the printer. The printer is only

available as a field kit.

T e m p l a t e : 1 - 1 -

1


33/56


19.06.200633


6 Measurement technique6.4 Option: BOMAG Terrameter professional (BTM prof) (VM11)

(ID: 173)

Printer BOMAG Operating Panel (BOP)

Explanations:This measuring system controls and documentsthe compaction process. The measurement sizewhich is determined and indicated, is the Evib-

value in MN/m². Also, the roller operator is informed by a redlight which indicates the end of compaction or that the max. compaction on a determined trackhas been achieved. The achieved compactionresult can be printed with a printer inside thecabin.

Components:2 acceleration transducers1 speed transducer 1 electronic unit1 BOMAG Operating Panel (BOP)

1 printer

BOMAG Terrameter professional (BTM prof)


T e m p l a t e : 4 - 1 -

1


34/56


19.06.200634


6 Measurement technique6.5 Option: BOMAG Compaction Management (BCM 05) (VM12)

Seite: 1/1 (ID: 174)

BOMAG CompactionManagement (BCM 05)


Explanations:System for surface covering compaction control of the performed compaction work on a construction

site. With the basic version, only a track related data recording is possible.

Scope of delivery:Mounting for BCM 05 with wiring harnessCan-BusSoftware BCM 05 mobileSoftware BCM 05 officeUSB stick

T e m p l a t e : 1 - 1 -

1


35/56


19.06.200635


6 Measurement technique6.6 Option: Preparation BCM 05 for BEM (VM17)

Seite: 1/1 (ID: 175)

Explanations:

This option is the basic requirement for the subsequent retrofit of a BCM 05, if the single drum roller isonly equipped with BEM (VM8).

Content of the option:Wire harness from the central electrics up to the roof console of the cabin.

Preparation BCM 05 for BEM


T e m p l a t e : 1 - 1 -

1


36/56


19.06.200636


6 Measurement technique6.7 Option: Preparation BCM 05 - Holder, Interface but without PC (VM19)

Seite: 1/1 (ID: 176)

Explanations:

With this option, the single drum roller is prepared for work with the BCM 05 so that only a PC, which isnot included in this option, has to be placed in the cabin.

Content of the option:PC holder Interface

Preparation BCM 05 - Holder,Interface but without PC


T e m p l a t e : 1 - 1 -

1


37/56


19.06.200637


7 Drum / Scraper / Frames7.1 Option: Padfoot segment shell (B5)

(ID: 157)

Explanations:For compaction of cohesive soils; the 3-shell-segments are placed onto the smooth drum and

bolted to it. Conversion of the drive wheelsfrom diamond tread tyres to tractor treadtyres is recommended.

Technical data:BW 211 - 213: 1300 kg; shell thickness: 6 mm;feet: 150 pcs., height: 84 mm, 99 cm²

Order references ZA:The padfoot shell (inclusive scrapers) ismounted on the machine at the factory. Thescrapers for the smooth dram are included inthe delivery.

Order reference NS:Delivery of complete segment shell with padfootscraper and mounting set.

Padfoot segment shell

ZA NSBW 211 D-40 582 003 00 582 020 52BW 212 D-40 582 003 00 582 020 52BW 213 D-40 582 003 00 582 020 52

T e m p l a t e : 4 - 1 -

1


38/56


19.06.200638


7 Drum / Scraper / Frames7.2 Option: 35 mm drum (B3)

Seite: 1/1 (ID: 158)

Explanations:

The thicker drum increases the operating weight of the machine by 700 kg and thus increases thelifetime of the drum with compaction of highly abrasive soil materials.

35 mm drum

ZA NSBW 212 D-40 582 003 50 -

T e m p l a t e : 1 - 1 -

1


39/56


19.06.200639


7 Drum / Scraper / Frames7.3 Option: Additional weight (J3)

Seite: 1/1 (ID: 159)

Explanations:

The front frame as well as the rear frame of various single drum rollers can be ballasted. Herewith, thetotal weight of the machine is increased. Advantage of ballasting the front frame is a higher static linear load. The ballast of the rear frame increases the gradeability of the single drum roller.

Single drum roller Additional weight

front frame

BW 211 D / PD-40 700 kg

Additional weight

ZA NSBW 211 D-40 582 001 46 -BW 211 PD-40 582 001 46 -

T e m p l a t e : 1 - 1 -

1


40/56


19.06.200640


7 Drum / Scraper / Frames7.4 Option: Additional weight (J15)

Seite: 1/1 (ID: 160)

Explanations:

The front frame as well as the rear frame of various single drum rollers can be ballasted. Herewith, thetotal weight of the machine is increased. Advantage of ballasting the front frame is a higher static linear load. The ballast of the rear frame increases the gradeability of the single drum roller.

Single drum roller Additional weight

front frame

BW 213 D / PD-40 600 kg

Additional weight

ZA NSBW 213 D-40 582 001 63 -BW 213 PD-40 582 001 63 -

T e m p l a t e : 1 - 1 -

1


41/56


19.06.200641


7 Drum / Scraper / Frames7.5 Option: Higher amplitude drum (V3)

Seite: 1/1 (ID: 161)

Explanations:

Increases the available amplitudes and centrifugal forces of the machine

Single drum roller Amplitude

in mm

Centrifugal forces

in kNComment

BW 211 D-40 Standard 1,80 / 0,90 236 / 170

BW 211 D-40 with V3 2,20 / 1,10 276 / 198

BW 212 D-40 Standard 1,80 / 0,90 236 / 170

BW 212 D-40 with V3 2,20 / 1,10 276 / 198

Higher amplitude drum

ZA NSBW 211 D-40 582 001 34 -BW 212 D-40 582 001 34 -

T e m p l a t e : 1 - 1 -

1


42/56


19.06.200642


7 Drum / Scraper / Frames7.6 Option: Higher amplitude (V8)

Seite: 1/1 (ID: 162)

Explanations:

Increases the available amplitudes and centrifugal forces of the machine.For the BW 212 D-40, this option is only available together with the option: 35 mm drum (B3).

Machine Amplitudesin mm

Centrifugalforces in kN

Comment

BW 212 D-40 Standard 1,80/0,90 236/170

BW 212 D-40 with V8 2,00/1,00 310/222 Only with B3 (35 mm drum)

BW 212 PD-40 Standard 1,64/0,82 275/202

BW 212 PD-40 with V8 1,84/0,92 310/222

BW 213 D-40 Standard 1,80/0,90 275/198

BW 213 D-40 with V8 2,00/1,00 310/222

BW 213 PD-4 Standard 1,64/0,82 275/202

BW 213 PD-4 with V8 1,84/0,92 310/222

Higher amplitude

ZA NSBW 212 D-40 582 001 36 -BW 212 PD-40 582 001 36 -BW 213 D-40 582 001 36 -BW 213 PD-40 582 001 36 -

T e m p l a t e : 1 - 1 -

1


43/56


19.06.200643


7 Drum / Scraper / Frames7.7 Option: Plastic contact scrapers (Q7)

Seite: 1/1 (ID: 163)

Plastic contact scrapers

ZA NSBW 211 D-40 582 008 05 -BW 212 D-40 582 008 05 -BW 213 D-40 582 008 05 -

Explanations:2 adjustable plastic contact scrapers (inclusive mounting set) for application on sand and highly

cohesive soils.

T e m p l a t e : 1 - 1 -

1


44/56


19.06.200644


8 Tyres8.1 Standard: Diamond tread tyres

Seite: 1/1 (ID: 177)

Diamond tread tyres

ZA NSBW 211 D-40 - -BW 212 D-40 - -BW 213 D-40 - -

Explanations:For detailed dimensions please refer to the technical data specs of the respective machine.

Standard equipment for all D-40 single drum rollers.

T e m p l a t e : 1 - 1 -

1


45/56


46/56


19.06.200646


8 Tyres8.3 Option: Tyre ballast (T28)

Seite: 1/1 (ID: 179)

Explanations:

The tyre ballast increases the operating weight of the single drum roller by 800 kg (2 x 400 kg).The tyre filling is a MgC12-water-mixture with following weight proportions:88 kg MgC12 and 312 l water.

The field kit includes 2 wheels with rims and diamond tread tyres.

Tyre ballast

ZA NSBW 211 D-40 580 006 21 -BW 212 D-40 582 006 21 -

T e m p l a t e : 1 - 1 -

1


47/56


19.06.200647


9 Bio oil9.1 Option: Bio-degradable hydraulic oil (HY2)

Seite: 1/1 (ID: 149)

Explanations:

Type: Panolin HLP Synth 46 (synthetic Ester with additives)Degradability: biologic degradable (CEC 1-33-T-82), >80% (average)Water contamination class: WGK=0Flash point (COC): 221°CPour point: -58°CSpecific density: 0,921 g/mlViscosity (40°C): 48,7 mm²/sViscosity (100°C): 8,7 mm²/sWater solubility: insoluble

Toxicological information:This product contains no substances which may be considered hazardous to health in its givenconcentration. Health risks are not known or expected under normal use. This option is only offered as

factory kit ex works. A subsequent filling of the machine with bio oil requires extensive flooding of thehydraulic oil circuit and may involve considerable higher cost.

Bio-degradable hydraulic oil


T e m p l a t e : 1 - 1 -

1


48/56


19.06.200648


10 Special paint and noise insulation10.1 Option: Special paint yellow parts (SL9)

Seite: 1/1 (ID: 164)

Special paint yellow parts


Explanations: All standard "YELLOW" machine parts are painted outside in one special colour.

YELLOW: drum frame, articulated joint, engine hood and rims.

T e m p l a t e : 1 - 1 -

1


49/56


19.06.200649


10 Special paint and noise insulation10.2 Option: Special paint complete (SL10)

Seite: 1/1 (ID: 165)

Special paint complete


Explanations: All standard "YELLOW" and "GREY" machine parts are painted outside in one special colour.

YELLOW: drum frame, articulated joint, engine hood and rimsGREY: rear frame, drum side parts, operator's platform

T e m p l a t e : 1 - 1 -

1


50/56


19.06.200650


10 Special paint and noise insulation10.3 Option: Special paint cabin (SL3)

Seite: 1/1 (ID: 166)

Special paint cabin


Explanations: All "YELLOW" cabin parts are painted in one special colour.

YELLOW: cabin inside and outside

T e m p l a t e : 1 - 1 -

1


51/56


19.06.200651


10 Special paint and noise insulation10.4 Option: Dual colour special paint (SL5)

Seite: 1/1 (ID: 167)

Dual colour special paint


Explanations: All standard "YELLOW" and "GREY" machine parts are painted outside in the respective special colour.

YELLOW: drum frame, articulated joint, engine hood and rimsGREY: rear frame, drum side parts, operator platform

T e m p l a t e : 1 - 1 -

1


52/56


19.06.200652


11 Tools / Special equipment11.1 Option: Towing hitch front (A2)

Seite: 1/1 (ID: 180)

Towing hitch front


Explanations: A towing hitch can be mounted only in the front of the front frame.

The towing force allowed for this hitch corresponds to the basic weight of the single drum roller.The towing hitch is only available as field kit.Type: SK5A

T e m p l a t e : 1 - 1 -

1


53/56


19.06.200653


11 Tools / Special equipment11.2 Option: Fire distinguisher (FL2)

Seite: 1/1 (ID: 181)

Fire distinguisher


Explanations:The fire distinguisher is only available as field kit.

Type: PU2S (ABC powder)Manufacturer: MinimaxExtinguisher substance: EURO-TROXIN

T e m p l a t e : 1 - 1 -

1


54/56


19.06.200654


11 Tools / Special equipment11.3 Option: Machine tools Torx (WE2)

Seite: 1/1 (ID: 183)

Machine tools Torx


Explanations:The tool set is prepared for repairs on Deutz engines. The tool set is stored in a shelf behind the seat.

This shelf has a lockable lid on single drum rollers with railing and sun roof or ROPS / FOPS. This optionis only available as field kit.

Content of the tool set:1 x tool bag1 x Torx double ring spanner E6 x E81 x Torx double ring spanner E10 x E121 x Torx Nut 850 S-E81 x Torx Nut 850 S-E101 x Torx Nut 880 S-E101 x Torx Nut 880 S-E121 x Torx Nut 900 S-E12

T e m p l a t e : 1 - 1 -

1


55/56


19.06.200655


11 Tools / Special equipment11.4 Option: Electronical anti-theft device (FS27)

Seite: 1/1 (ID: 184)

Electronical anti-theft device


Explanations:Protects the machine against unauthorized use.

The single drum roller is ready for operation in 30 seconds after entering a 6-digit safety code.The basic safety code is securely stored at BOMAG.The keyboard is attached at the rear wall inside the cabin.

T e m p l a t e : 1 - 1 -

1


56/56


19.06.200656

11 Tools / Special equipment11.5 Option: Winter package (M35)

Seite: 1/1 (ID: 185)

Explanations:

Enables the start at low temperatures up to -25°C. Without the winter package, starting is only possibleup a temperature of -10°C.

The option includes:heating flange in the engine2nd batteryadditional thermostat in the hydraulic circuitheating in fuel filter

Winter package

ZA NSBW 211 D-40 582 002 09 582 020 63BW 211 PD 40 582 002 09 582 020 63

optionscatalogue single drums 40 00-en

Documents