optimal valve solutions for oil and gas …gas...1 avk flow control optimal valve solutions for oil...
TRANSCRIPT
1
AVK FLOW CONTROL
OPTIMAL VALVE SOLUTIONS FOR OIL AND GAS PLANTS
InterApp
World Valve
Wouter Witzel
TEC artec
AVK
3
AVK FLOW CONTROL 4-5
OFFSHORE PRODUCTION 6-9
ONSHORE PRODUCTION 10-13
PIPELINE GAS 14-15
PIPELINE STORAGE OIL 16-17
LIQUIFIED NATURAL GAS 18-19
PROCESS WATER 20-21
INDUSTRIAL WASTE WATER 22-23
FIRE PROTECTION 24-25
AVK FLOW CONTROL SEGMENTS 26-27
CONTENT:
AVK FLOW CONTROL l OIL & GAS PLANTS
5
AVK FLOW CONTROLOPTIMAL VALVE SOLUTIONS
AVK FLOW CONTROL DELIVERS ADVANCED VALVE SOLUTIONS BASED ON APPLICATION KNOWLEDGE AND UNDERSTANDING, COMPETENT LOCAL SUPPORT AND INTERNATIONAL COORDINATION.
BACKED UP BY THE LEADING COMPANIES AND MANUFACTURERS OF INDUSTRIAL VALVES, YOU CAN EXPECT HIGH AND CONSISTENT QUALITY AND SERVICE
01 02 03EXPECT APPLICATION KNOWLEDGE AND UNDERSTANDING
EXPECT COMPETENT LOCAL SUPPORT
EXPECT INTERNATIONAL COORDINATION
6
OFFSHORE PRODUCTION
Double eccentric high performance butterfly valves
Centric butterfly valves with loose or fixed liner
Triple eccentric butterfly valves
Full bore ball valves High pressure ball valves
Knife gate valves
Strainer
Check valves
AVK FLOW CONTROL l OIL & GAS PLANTS
7
High performance
butterfly valves
High performance butterfly valve
Specifications:
Size: DN50 – DN900
Pressure: 20 Bar (class 150)50 Bar (class 300)
Temperature: Up to +425°C
Specifications:
Size: Up to DN800
Pressure: PN10, 16, 25 or 40
Temperature: Up to +200°C
Rubberlined butterfly valves
Swing check ValvesTriple offset
metal to metal seat but-terfly valve
Complete range of butterfly valves in wafer, semi-lug, tapped-lug, u-section, single flange and double flange.
Body and bonnet in ductile iron. Stem and hinge in stainless steel. Lever and weight or lever and spring.
Body types: Wafer, lug and flange type, various body and disc ma-terials available.
Specifications:
Size: DN50 – DN2200
Pressure: Up to 25 Bar
Temperature: Up to +200°C
Specifications:
Size: DN50 – DN600
Pressure: Up to 16 Bar
Temperature: 0 to +70°C
Specifications:
Size: DN80 – DN1400
Pressure: Max. working pressure 50 bar (up to 100 bar)
Temperature: Up to +700°C
Double eccentric high performance
butterfly valves
Double eccentric design. Available in many high-quality materials. Available as wafer, lugged and double flanged type.
Wafer and Lugged Versions.Various Body and Disc Materials available.Electric and Pneumatic Actuation.
Specifications:
Size: Up to DN1200
Pressure: Full vacuum to 25 Bar
Temperature: -50 to +230°C
Centric butterfly valves
Wide range of materials for disc and loose liner, with ductil iron or carbon steel body in wafer, lug or u-section type, all kind of actua-tors.
Body and trim materials to customer requirements. Tef-lon or NBR seated. Wafer, lug, monoflanged and doubleflanged design.
Wafer/lug type:
Size: DN25 – DN1600 /DN25 – DN600
Pressure: Up to 16 Bar /Up to 20 Bar
Temperature: -50 to +140°C / -40 to +200°C
Cast iron or stainless steel monoblock body, stainless steel gate, different seat materials (metal, EPDM,...) and various actuation solutions (manual, pneumatic, electric, etc.)
Specifications:
Size: Up to DN1200
Pressure: 10 Bar (DN250) / 6 Bar (DN450) / 5 Bar (DN600) / 2 Bar (DN1200)
Temperature: -20 to +250°C
General service knife gate valve
9
High pressure ball valves
TECslide flat plate gate valve
Knife Gate Valve
Specifications:
Size: DN25 – DN1400 / DN25 – DN250/DN1000
Pressure: From 16 to 400 Bar / From 16 to 420 Bar
Temperature: -196°C to +550°C
Specifications:
Size: DN50 to DN1200
Pressure: DN10 – DN40
Temperature: Up to +550°C
Specifications:
Size: DN50 to DN1800
Pressure: PN10 – PN250 and ANSI B16.5
Temperature: -40°C to +300°C
Check valvesCheck valves
Flangeless wafer type. Seat bonded to the body
Metal seated check valves.
Specifications:
Size: DN50 – 600
Pressure: Up to 16 Bar
Temperature: -40 to +200°C
Specifications:
Size: DN32 – DN600
Pressure: Up to 16 Bar
Temperature: -10 to +400°C
Strainer
Soft and metal seated. On/off and control function. Custom made.Alternative: Ceramic parts Tungsten carbide coating, On/off and control function.
Shut-off valve with a three-part modular design.The slider plate is moved over a rising spindle.
Bi-directional high performance valve specially designed to with-stand high pressures. Resilient seated valve, Fully lugged for end of line with a counter flange or fully lugged between flanges. Valve components available in var-ious materials. Electric, hydraulic or pneumatic actuation.
Specifications:
Size: DN15 – DN400 (PN16) DN15 – DN200 (PN40)
Pressure: PN16, PN40
Temperature: Tmax - 200 °C (PN16) Tmax - 400 °C (PN40)
Body & cap: Carbon steelFilter screen: Stainless steelSealing: Asbestos-free material
10
ONSHORE PRODUCTION
Double eccentric high performance butterfly valves
Centric butterfly valves with loose or fixed liner
Triple eccentric butterfly valves
Full bore ball valves High pressure ball valves
Knife gate valves
Gate- and globe valves
Check valves
AVK FLOW CONTROL l OIL & GAS PLANTS
11
High performance
butterfly valves
Triple offset metal to metal
seat butterfly valve
High performance
butterfly valves
Rubberlined butterfly valves
Specifications:
Size: DN50 – DN900
Pressure: 20 Bar (class 150)50 Bar (class 300)
Temperature: Up to +425°C
Specifications:
Size: DN80 – DN1400
Pressure: Max. working pressure 50 bar (up to 100 bar)
Temperature: Up to +700°C
Specifications:
Size: Up to DN800
Pressure: PN10, 16, 25 or 40
Temperature: Up to +200°C
Specifications:
Size: DN50 – DN2200
Pressure: Up to 25 Bar
Temperature: Up to +200°C
Double eccentric high performance
butterfly valves
Ball valve full bores
Double eccentric design. Available in many high-quality materials. Avail-able as wafer, lugged and double flanged type.
Body types: Wafer, lug and flange type, various body and disc materi-als available.
Wafer and Lugged Versions, Various Body and Disc Materials available
Complete range of butterfly valves in wafer, semi-lug, tapped-lug, u-section, single flange and double flange.
Specifications:
Size: Up to DN1200
Pressure: Full vacuum to 25 Bar
Temperature: -50 to +230°C
Specifications:
Size: DN15 – DN200
Pressure: PN6 – PN420
Temperature: From -190°C – +435°C
Centric butterfly valves
Full bore ball valves
Wide range of materials for disc and loose liner, with ductil iron or carbon steel body in wafer, lug or u-section type, all kind of actuators.
Body and ball in stainless steel. Seats in PTFE.Manually pneumatically or electrically operated.
Body and trim materials to cus-tomer requirements. Teflon or NBR seated. Wafer, lug, monoflanged and doubleflanged design.
Floating split body forged. Avail-able as Double block and bleed. Available with trunnion mounted or floating ball design. Designed for any service condition (high temperature, cryogenic, etc.).Various materials on request.
Wafer/lug type:
Size: DN25 – DN1600 /DN25 – DN600
Pressure: Up to 16 Bar /Up to 20 Bar
Temperature: -50 to +140°C / -40 to +200°C
Specifications:
Size: DN15 – DN100
Pressure: Up to 63 Bar
Temperature: Up to +650°C
12
General service knife gate valve
High pressure ball valves
Specifications:
Size: Up to DN1200
Pressure: 10 Bar (DN250) / 6 Bar (DN450) / 5 Bar (DN600) / 2 Bar (DN1200)
Temperature: -20 to +250°C
Specifications:
Size: DN25 – DN1400 / DN25 – DN250/DN1000
Pressure: From 16 to 400 Bar / From 16 to 420 Bar
Temperature: -196°C to +550°C
TECslide flat plate gate valve
Cast iron or stainless steel monoblock body, stainless steel gate, different seat materials (metal, EPDM,...) and various actuation solutions (manual, pneumatic, electric, etc.)
Soft and metal seated. On/off and control function. Custom made.Alternative: Ceramic parts Tungsten carbide coating, On/off and control function.
Specifications:
Size: DN50 to DN1200
Pressure: DN10 – DN40
Temperature: Up to +550°C
Gate Valve
Welded ends, flange ends. For wa-ter, steam, condensate and gases, Atex, chemical applications.
Shut-off valve with a three-part modular design.The slider plate is moved over a rising spindle.
Specifications:
Size: DN50 – DN350
Pressure: Max 400 Bar
Temperature: Up to +600°C
AVK FLOW CONTROL l OIL & GAS PLANTS
13
Check valveKnife Gate Valve Check valve
Specifications:
Size: DN32 – DN600
Pressure: Up to 16 Bar
Temperature: -10 to +400°C
Specifications:
Size: DN50 to DN1800
Pressure: PN10 – PN250 and ANSI B16.5
Temperature: -40°C to +300°C
Specifications:
Size: DN32 – DN600
Pressure: Up to 16 Bar
Temperature: -10 to +400°C
Check valve
Metal seated check valves.Bi-directional high performance valve specially designed to with-stand high pressures. Resilient seated valve, Fully lugged for end of line with a counter flange or fully lugged between flanges. Valve components available in various materials. Electric, hydraulic or pneumatic actuation.
Metal seated check valves.
Specifications:
Size: DN50 – 600
Pressure: Up to 16 Bar
Temperature: -40 to +200°C
Flangeless wafer type. Seat bonded to the body
Control Globe ValveGlobe Valve
Specifications:
Size: DN10 – DN300
Pressure: Up to 40 Bar
Temperature: Up to +560°C
Specifications:
Size: DN15 – DN125
Pressure: Max 400 Bar
Temperature: Up to +600°C
Swing check Valve
Stop valve designed to open and stop a flow. Can be used as regulating device. For water, steam, condensate and gases.
Welded ends, flange ends. For wa-ter, steam, condensate and gases, Atex, chemical applications.
Specifications:
Size: DN50 – DN600
Pressure: Up to 16 Bar
Temperature: 0 to +70°C
Check valve
Metal seated check valves.Body and bonnet in ductile iron. Stem and hinge in stainless steel. Lever and weight or lever and spring.
Specifications:
Size: DN32 – DN600
Pressure: Up to 16 Bar
Temperature: -10 to +400°C
14
PIPELINE GAS
Double eccentric high performance butterfly valves
Triple eccentric butterfly valves
Full bore ball valves High pressure ball valves
Check valves
AVK FLOW CONTROL l OIL & GAS PLANTS
15
High performance
butterfly valves
High performance
butterfly valves
Specifications:
Size: DN50 – DN900
Pressure: 20 Bar (class 150)50 Bar (class 300)
Temperature: Up to +425°C
Specifications:
Size: Up to DN800
Pressure: PN10, 16, 25 or 40
Temperature: Up to +200°C
Double eccentric high performance
butterfly valves
Double eccentric design. Available in many high-quality materials. Available as wafer, lugged and double flanged type.
Wafer and Lugged Versions, Various Body and Disc Materials available
Specifications:
Size: Up to DN1200
Pressure: Full vacuum to 25 Bar
Temperature: -50 to +230°C
Triple offset metal to metal seat butterfly valve
High pressure ball valves
Body types: Wafer, lug and flange type, various body and disc materials available.
Soft and metal seated. On/off and control function. Custom made.Alternative: Ceramic parts Tungsten carbide coating, On/off and control function.
Body and trim materials to customer requirements. Teflon or NBR seated. Wafer, lug, monoflanged and doubleflanged design.
Specifications:
Size: DN80 – DN1400
Pressure: Max. working pressure 50 bar (up to 100 bar)
Temperature: Up to +700°C
Specifications:
Size: DN25 – DN1400 / DN25 – DN250/DN1000
Pressure: From 16 to 400 Bar / From 16 to 420 Bar
Temperature: -196°C to +550°C
Body and bonnet in ductile iron. Stem and hinge in stainless steel. Lever and weight or lever and spring.
Metal seated check valves. Body and ball in stainless steel. Seats in PTFE.Manually pneumatically or electrically operated.
Floating split body forged. Available as Double block and bleed. Available with trunnion mounted or float-ing ball design. Designed for any service condi-tion (high temperature, cryogenic, etc.). Various materials on request.
Specifications:
Size: DN50 – DN600
Pressure: Up to 16 Bar
Temperature: 0 to +70°C
Specifications:
Size: DN32 – DN600
Pressure: Up to 16 Bar
Temperature: -10 to +400°C
Specifications:
Size: DN15 – DN100
Pressure: Up to 63 Bar
Temperature: Up to +650°C
Specifications:
Size: DN15 – DN200
Pressure: PN6 – PN420
Temperature: From -190°C – +435°C
Swing check Valve Check valves Full bore
ball valvesBall valve full bore
16
PIPELINE STORAGE OIL
Double eccentric high performance butterfly valves
Triple eccentric butterfly valves
Full bore ball valves High pressure ball valves
Knife gate valves
Check valves
AVK FLOW CONTROL l OIL & GAS PLANTS
17
Bi-directional high per-formance valve specially designed to withstand high pressures. Resilient seated valve, Fully lugged for end of line with a counter flange or fully lugged between flanges.
Cast iron or stainless steel monoblock body, stainless steel gate, different seat materials (metal, EPDM,...) and various actuation solu-tions (manual, pneumatic, electric, etc.)
Specifications:
Size: DN50 to DN1800
Pressure: PN10 – PN250 and ANSI B16.5
Temperature: -40°C to +300°C
Specifications:
Size: Up to DN1200
Pressure: 10 Bar (DN250) / 6 Bar (DN450) / 5 Bar (DN600) / 2 Bar (DN1200)
Temperature: -20 to +250°C
Knife Gate ValveGeneral service knife gate valve
Shut-off valve fully welded design with internal spindle. Due to the use of a back seal for the spindle, the packing seals can be re-placed during operation.
Specifications:
Size: DN80 – DN400
Pressure: DN16 – DN100
Temperature: -10 to +70°C
TECgate shut-off valve
Metal seated check valves.
Specifications:
Size: DN32 – DN600
Pressure: Up to 16 Bar
Temperature: -10 to +400°C
Check valves
High performance
butterfly valves
High performance
butterfly valves
Specifications:
Size: DN50 – DN900
Pressure: 20 Bar (class 150)50 Bar (class 300)
Temperature: Up to +425°C
Specifications:
Size: Up to DN800
Pressure: PN10, 16, 25 or 40
Temperature: Up to +200°C
Double eccentric high performance
butterfly valves
Double eccentric design. Available in many high-quality materials. Available as wafer, lugged and double flanged type.
Wafer and Lugged Versions, Various Body and Disc Materials available
Specifications:
Size: Up to DN1200
Pressure: Full vacuum to 25 Bar
Temperature: -50 to +230°C
Triple offset metal to metal seat butterfly valve
High pressure ball valves
Body types: Wafer, lug and flange type, various body and disc materials available.
Soft and metal seated. On/off and control function. Custom made.Alternative: Ceramic parts Tungsten carbide coating, On/off and control function.
Body and trim materials to customer requirements. Teflon or NBR seated. Wafer, lug, monoflanged and doubleflanged design.
Specifications:
Size: DN80 – DN1400
Pressure: Max. working pressure 50 bar (up to 100 bar)
Temperature: Up to +700°C
Specifications:
Size: DN25 – DN1400 / DN25 – DN250/DN1000
Pressure: From 16 to 400 Bar / From 16 to 420 Bar
Temperature: -196°C to +550°C
Shut-off valve with a three-part modular design.The slider plate is moved over a rising spindle.
Specifications:
Size: DN50 to DN1200
Pressure: DN10 – DN40
Temperature: Up to +550°C
TECslide flat plate gate valve
18
Double eccentric high performance butterfly valves
Centric butterfly valves with loose or fixed liner
Triple eccentric butterfly valves
Full bore ball valves High pressure ball valves
Knife gate valves
Check valves
LIQUIFIED NATURAL GAS
AVK FLOW CONTROL l OIL & GAS PLANTS
19
High performance
butterfly valves
Specifications:
Size: DN50 – DN900
Pressure: 20 Bar (class 150)50 Bar (class 300)
Temperature: Up to +425°C
Rubberlined butterfly valves
Triple offset metal to metal seat butterfly
valve
Complete range of butterfly valves in wafer, semi-lug, tapped-lug, u-section, single flange and double flange.
Body types: Wafer, lug and flange type, various body and disc materials available.
Specifications:
Size: DN50 – DN2200
Pressure: Up to 25 Bar
Temperature: Up to +200°C
Specifications:
Size: DN80 – DN1400
Pressure: Max. working pres-sure 50 bar (up to 100 bar)
Temperature: Up to +700°C
Double eccentric high performance
butterfly valves
Double eccentric design. Available in many high-quality materials. Available as wafer, lugged and double flanged type.
Specifications:
Size: Up to DN1200
Pressure: Full vacuum to 25 Bar
Temperature: -50 to +230°C
Centric butterfly valves
Wide range of materials for disc and loose liner, with ductil iron or carbon steel body in wafer, lug or u-section type, all kind of actuators.
Body and trim materials to customer requirements. Teflon or NBR seated. Wafer, lug, monoflanged and doubleflanged design.
Wafer/lug type:
Size: DN25 – DN1600 /DN25 – DN600
Pressure: Up to 16 Bar /Up to 20 Bar
Temperature: -50 to +140°C / -40 to +200°C
Soft and metal seated. On/off and control function. Custom made. Alternative: Ceramic parts Tungsten carbide coating, On/off and control function.
Specifications:
Size: DN25 – DN1400 / DN25 – DN250/DN1000
Pressure: From 16 to 400 Bar / From 16 to 420 Bar
Temperature: -196°C to +550°C
High pressure ball valves
Metal seated check valves.
Specifications:
Size: DN32 – DN600
Pressure: Up to 16 Bar
Temperature: -10 to +400°C
Check valves
Floating split body forged. Available as Double block and bleed. Available with trunnion mounted or floating ball de-sign. Designed for any service condition (high temperature, cryogenic, etc.). Various mate-rials on request.
Specifications:
Size: DN15 – DN200
Pressure: PN6 – PN420
Temperature: From -190°C – +435°C
Ball valve full bore
Shut-off valve fully welded design with internal spindle. Due to the use of a back seal for the spindle, the packing seals can be replaced during operation.
Specifications:
Size: DN80 – DN400
Pressure: DN16 – DN100
Temperature: -10 to +70°C
TECgate shut-off valve
High performance
butterfly valves
Specifications:
Size: Up to DN800
Pressure: PN10, 16, 25 or 40
Temperature: Up to +200°C
Wafer and Lugged Versions, Various Body and Disc Materials available
Body and ball in stain-less steel. Seats in PTFE.Manually pneumatically or electrically operated.
Specifications:
Size: DN15 – DN100
Pressure: Up to 63 Bar
Temperature: Up to +650°C
Full bore ball valves
20
PROCESS WATER
Double eccentric high performance butterfly valves
Centric butterfly valves with loose or fixed liner
Full bore ball valves
Gate valves
Strainers
Check valves
AVK FLOW CONTROL l OIL & GAS PLANTS
21
High performance
butterfly valves
Flanged double eccentric butterfly valves
High performance
butterfly valves
Specifications:
Size: DN50 – DN900
Pressure: 20 Bar (class 150)50 Bar (class 300)
Temperature: Up to +425°C
Specifications:
Size: DN200 – DN2200
Pressure: 10 + 16 + 25 Bar
Temperature: 0 to +70°C
Specifications:
Size: Up to DN800
Pressure: PN10, 16, 25 or 40
Temperature: Up to +200°C
Double eccentric high performance
butterfly valves
Double eccentric de-sign. Available in many high-quality materials. Available as wafer, lugged and double flanged type.
Body and disc in ductile iron.Shaft, and pins in Stainless Steel. Fusion bonded epoxy coating acc to GSK.
Wafer and Lugged Versions, Various Body and Disc Materials available
Specifications:
Size: Up to DN1200
Pressure: Full vacuum to 25 Bar
Temperature: -50 to +230°C
Centric butterfly valves
Strainer
Check valve
Wide range of materials for disc and loose liner, with ductil iron or car-bon steel body in wafer, lug or u-section type, all kind of actuators.
Body and bonnet in ductile iron. Position of the drain plug enables full drainage without removing the lid. Quick removal of lid for maintenance. Screen of stainless steel in robust one-piece design.
Wide range of materials for disc and loose liner, with ductil iron or car-bon steel body in wafer, lug or u-section type, all kind of actuators.
Body and trim ma-terials to customer requirements. Teflon or NBR seated. Wafer, lug, mono-flanged and double-flanged design.
Wafer/lug type:
Size: DN25 – DN1600 /DN25 – DN600
Pressure: Up to 16 Bar /Up to 20 Bar
Temperature: -50 to +140°C / -40 to +200°C
Specifications:
Size: DN32 – DN600
Pressure: Up to 16 Bar
Temperature: -10 to +400°C
Specifications:
Size: DN50 – 600
Pressure: Up to 16 Bar
Temperature: -40 to +200°C
Body and ball in stain-less steel. Seats in PTFE.Manually pneumati-cally or electrically operated.
Body and bonnet in ductile iron. Stem in stainless steel. Wedge in ductile iron. Oper-ated by gearbox and hand wheel or actuator.
metal and soft seated check valves.
Specifications:
Size: DN15 – DN100
Pressure: Up to 63 Bar
Temperature: Up to +650°C
Specifications:
Size: DN40 – DN800
Pressure: Up to 16 Bar
Temperature: 0 to +70°C
Specifications:
Size: DN32 – DN600
Pressure: Up to 16 Bar
Temperature: -10 to +400°C
Full bore ball valves
Resilient seated gate valve
Check valvesRubberlined
butterfly valves
Complete range of but-terfly valves in wafer, semi-lug, tapped-lug, u-section, single flange and double flange.
Specifications:
Size: DN50 – DN2200
Pressure: Up to 25 Bar
Temperature: Up to +200°C
Body and bonnet in ductile iron. Stem and hinge in stainless steel. Lever and weight or lever and spring.
Specifications:
Size: DN50 – DN600
Pressure: Up to 16 Bar
Temperature: 0 to +70°C
Swing check valve
22
Double eccentric high performance butterfly valves
Centric butterfly valves with loose or fixed liner
Full bore ball valves
Knife gate valves
Strainers
Gate valves
Check valves
INDUSTRIAL WASTE WATER
AVK FLOW CONTROL l OIL & GAS PLANTS
23
High performance
butterfly valves
High performance
butterfly valves
Specifications:
Size: DN50 – DN900
Pressure: 20 Bar (class 150)50 Bar (class 300)
Temperature: Up to +425°C
Specifications:
Size: Up to DN800
Pressure: PN10, 16, 25 or 40
Temperature: Up to +200°C
Double eccentric high performance
butterfly valves
Double eccentric de-sign. Available in many high-quality materials. Available as wafer, lugged and double flanged type.
Wafer and Lugged Versions, Various Body and Disc Materials available
Specifications:
Size: Up to DN1200
Pressure: Full vacuum to 25 Bar
Temperature: -50 to +230°C
Centric butterfly valves
Wide range of materials for disc and loose liner, with ductil iron or car-bon steel body in wafer, lug or u-section type, all kind of actuators.
Body and trim ma-terials to customer requirements. Teflon or NBR seated. Wafer, lug, monoflanged and doubleflanged design.
Wafer/lug type:
Size: DN25 – DN1600 /DN25 – DN600
Pressure: Up to 16 Bar /Up to 20 Bar
Temperature: -50 to +140°C / -40 to +200°C
Rubberlined butterfly valves
Rubberlined butterfly valves
Complete range of butterfly valves in wa-fer, semi-lug, tapped-lug, u-section, single flange and double flange.
Cast iron or stainless steel monoblock body, stainless steel gate, different seat materials (metal, EPDM,...) and various actuation solu-tions (manual, pneumatic, electric, etc.)
Body and ball in stainless steel. Seats in PTFE.Manually pneumatically or electrically operated.
Body and bonnet in ductile iron. Stem in stainless steel. Wedge in ductile iron. Oper-ated by gearbox and hand wheel or actuator.
metal and soft seated check valves.
Body and bonnet in ductile iron. Position of the drain plug enables full drainage without removing the lid. Quick removal of lid for maintenance. Screen of stainless steel in robust one-piece design.
Specifications:
Size: DN15 – DN100
Pressure: Up to 63 Bar
Temperature: Up to +650°C
Specifications:
Size: DN40 – DN800
Pressure: Up to 16 Bar
Temperature: 0 to +70°C
Specifications:
Size: DN32 – DN600
Pressure: Up to 16 Bar
Temperature: -10 to +400°C
Specifications:
Size: DN32 – DN600
Pressure: Up to 16 Bar
Temperature: -10 to +400°C
Full bore ball valves
Resilient seated gate valve
Check valves Strainer
Body and bonnet in ductile iron. Stem and hinge in stainless steel. Lever and weight or lever and spring.
Specifications:
Size: DN50 – DN600
Pressure: Up to 16 Bar
Temperature: 0 to +70°C
Swing check valve
Specifications:
Size: DN50 – DN2200´
Pressure: Up to 25 Bar
Temperature: Up to +200°C
Specifications:
Size: Up to DN1200
Pressure: 10 Bar (DN250) / 6 Bar (DN450) / 5 Bar (DN600) / 2 Bar (DN1200)
Temperature: -20 to +250°C
24
AVK FLOW CONTROL l OIL & GAS PLANTS
FIRE PROTECTION
Outdoor fire protection
Indoor fireProtection
Universal street cover
Universal street cover for AVK telescopic ext. spindle. Can be used as fixed and floating street cover with deflection ability. Body and distance ring of ductile iron, lid of grey cast iron.
Specifications:
Size: Lid diameter: 131mm Lid inscription: “Fire”
Flanged resilient seated gate valve OS&Y
Body, bonnet, yoke and hand wheel in ductile iron. Stem in copper alloy. Wedge in ductile iron vulcanized with AVK EPDM rubber. Fusion bonded epoxy coating acc. to GSK. Operated by hand wheel. UL/FM approved.
Specifications:
Size: DN65 – DN300
Pressure: 16 Bar
Temperature: 0 to +70°C
Wall post indicator
AVK wall post indicators are available in three fixed lengths. The handwheel can be locked, and the wall post indicators have a pre-cast threaded boss for mounting a supervisory switch.
Specifications:
Size: DN65 – DN400
Wet Barrel Fire Hydrant to AWWA
AVK wet barrel hydrant is designed to be a trouble free, easy to maintain hydrant. Designed so that one person can perform all routine repairs and mainte-nance.
Specifications:
Size: DN150
Pressure: PN16
Temperature: 0 to +70°C
Extension spindelfor gate valves,
fixed length
Key adaptor #23-32, with spindle adaptor fitting to US type wrench nut.
Specifications:
Available in following fixed lengths (in mm): 800 / 1000 / 1250 / 1500, 2000 / 3000
Telescopic lengths (in mm): 450-700 / 650-1100, 1050-1700 / 1700-2900
25
Dry barrel hydrant
Dry barrel monitor hydrant
Telescopic post indicator
Flanged resilient seated post
indicator gate valve
Flanged resilient seated wrench nut
gate valve
Grooved end gate valve
Flanged concentric
butterfly valve
Flanged resilient seated pin indicator
gate valve
Body, upper and lower bar-rel in ductile iron. Wedge in ductile iron vulcanized with AVK EPDM rubber.Stem in stainless steel. Stem rod in epoxy coated steel. Fusion bonded epoxy coating acc. to GSK, with UV resistant polyester top coat.
Body, upper and lower bar-rel, monitor elbow in ductile iron. Wedge in ductile iron vulcanized with AVK EPDM rubber. Stem in stainless steel. Stem rod in epoxy coated steel. Fusion bonded epoxy coating acc. to GSK, with UV resistant polyester top coat. UL/FM approved.
Body in ductile iron.Stem in galvanized steel.Fusion bonded epoxy coat-ing acc. to GSK, with UV resistant polyester top coat.
Body and bonnet in ductile iron. Stem in stainless steelWedge in ductile iron vulcanized with AVK EPDM rubber. Fusion bonded epoxy coating acc. to GSKOperated by Post Indicator.UL/FM approved.
Body and bonnet in ductile iron. Stem in stainless steel. Wedge in ductile iron vulcanized with AVK EPDM rubber. Fusion bonded epoxy coating acc. to GSK. Operated by stem exten-sion. UL/FM approved.
With Pin Indicator and handwheel according to AWWA C 606 EPDM rubber wedge Epoxy coated according to DIN 30677-2 and GSK guide lines
Body and bonnet in ductile iron. Stem in stainless steel. Wedge in ductile iron vulcanized with AVK EPDM rubber. Fusion bonded epoxy coating acc. to GSK. Operated by hand wheel.
Body and bonnet in ductile iron. Stem in stainless steel. Wedge in ductile iron vulcanized with AVK EPDM rubber. Fusion bonded epoxy coating acc. to GSK. Operated by hand wheel.
Specifications:
Size: DN65-DN400
Pressure: 16 Bar
Temperature: Up to +70°C
Specifications:
Size: DN50-DN400
Pressure: 16 Bar
Temperature: 0 to +70°C
Specifications:
Size: DN100-DN400
Specifications:
Size: DN150
Pressure: 16.1 – 16.5 Bar
Temperature: 0 to +70°C
Specifications:
Size: DN50 – DN300
Pressure: PN16
Temperature: 0 to 70°C
Specifications:
Size: DN50 – DN400
Pressure: 10 + 16 Bar
Temperature: 0 to +70°C
Specifications:
Size: DN50 – DN300
Pressure: 10 + 16 Bar
Temperature: 0 to +70°C
Specifications:
Size: DN150
Pressure: 16.1 Bar
Temperature: 0 to +70°C
Complete range of but-terfly valves in wafer, semi-lug, tapped-lug, u-section, single flange and double flange.
Rubberlined butterfly valves
Specifications:
Size: DN50 – DN2200
Pressure: Up to 25 Bar
Temperature: Up to +200°C
Landing valves
Couplings in gunmetal, bronze, brass or light alloy.
Specifications:
Size: DN25 – DN15
Pressure: Up to PN16
Temperature: Max 120°C
27
AVK FLOW CONTROL SEGMENTS
AT AVK FLOW CONTROL, WE FOCUS ON FOUR MAIN TARGET SEGMENTS. IN THIS WAY WE ARE ABLE TO HIGHTEN THE QUALITY OF OUR SOLUTIONS, AND BE CLOSER TO OUR CUSTOMERS AT ALL TIMES.
OPTIMAL VALVE SOLUTIONS FOR POWER GENERATION
OPTIMAL VALVE SOLUTIONS FOR THE MINING INDUSTRY
OPTIMAL VALVE SOLUTIONS FOR OIL AND GAS PLANTS
OPTIMAL VALVE SOLUTIONS FOR WATER TREATMENT
28
AVK Flow ControlKaretmagervej 19D7100 VejleDenmark
www.avkflowcontrol.comTel.: +45 7877 5077
Direct: +45 7877 5077 Mobile: +45 2055 2111E-mail: [email protected]
Direct: +45 7877 5077 Mobile: +45 4174 8393E-mail: [email protected]
Direct: +45 7877 5077Mobile: +45 4038 2239E-mail: [email protected]
Karsten B. LarsenSales
Gerner H. KnudsenSales Manager
Mikael Baltzer HansenKey Account Manager