optimal rock drilling system - koreanpartners
TRANSCRIPT
OPTIMAL ROCK DRILLING SYSTEMThe Gate to Drilling Technology
www.sungwon7.co.kr
2
Oil & Gas Well Drilling
Mining Drilling
Piling & Foundation
Construction
OuR ChALLENGE
NEvER STOPS. Water Well
Drilling
COMPany OvervieW
PrODuCt lineuP
HaMMer & bit
Prime Manufacturing Process
DTH Hammer
CD Hammer
Hammer Bit
Overburden Drill Bit
Ring Bit
DTH Hammer Detail
auGer MaCHine & aCCessOries
Prime Manufacturing Process
Auger
Rod
Auger Bit
Joint
Oil-Air Tank
Shock Absorber
Accessories
GlObal netWOrk
04
06
CONTENTS
64
52
08
We, Sungwon Heavy Machinery, have been manufacturing and supplying rock, soil drilling equipment and tools of DTH Hammers, Hammer Bits and Auger Machines in Korea. The products are being produced at our well-equipped manufacturing facilities by combining quality raw materials, advanced machines and extensively experienced manufacturing & engineering skills. Every manufacturing process is under precise control to meet customer’s full requirements for a high performance.
Sungwon is able to provide DTH Hammers & Auger Equipment through Original Equipment Manufacturing arrangement, as well as Sungwon’s own brand.
Since 2001, Sungwon has built a strong profile in Korea and it has expanded its global presence to reach more than 30 countries, continuing to tap into new markets with the highest quality & cost-effective drilling tools.
Sungwon would sincerely like to be your vital partner by instilling more value to your company and making your on-going & future business more successful and powerful.
Sungwon is ready to serve your company regarding standard or customized product requests.
SuNGwON
• Optimized Products • Tried and Tested Products• Customizable Products
LEADS us to move forward for a Promising Tomorrow, CONNECTS today to a Comfortable Tomorrow, BUILDS a Robust Tomorrow.
OPTimal ROCk DRilling SySTem
COMPany OvervieW
PrODuCt lineuP
HaMMer & bit
Prime Manufacturing Process
DTH Hammer
CD Hammer
Hammer Bit
Overburden Drill Bit
Ring Bit
DTH Hammer Detail
auGer MaCHine & aCCessOries
Prime Manufacturing Process
Auger
Rod
Auger Bit
Joint
Oil-Air Tank
Shock Absorber
Accessories
GlObal netWOrk
04
06
CONTENTS
64
52
08
6 7
• Noise and Vibration free• Excavating and Drilling in both
Soft and Hard Ground• Application for Water-cutoff
Walls, Slurry Walls, Site Cleaning, Ground Measuring
• Making the solidified ground condition enough to construct by
mixing the cement and soil with an agitating blades of Rod
• Application for Earth Retaining Wall, Water Cutoff Wall, Ground
Reinforcement in land and Beach Wall Foundation, Sea Wall Foundation
work in Ocean
• Sungwon offers DTH Hammers with the super performances and
penetration rates to drill deep holes with great accuracy.
• They are well suited for your optimized application with smaller
& medium-sized Hammers.
• Sungwon offers DTH Hammers with the super performances and
penetration rates to drill deep holes with great accuracy.
• They are well suited for your optimized application with large
diameter Hammers.
• Application: River Improvement, Water Supply and Sewerage &
Subway Construction• DCM construction method is used
in a land or marine weak ground
• Three different bit-head design are available: Convex, Concave and
Flat face.• Specific bit-head design required
by customers can be made available.
• This bits are designed for drilling a larger diameter hole than the
casing to reach the solid bedrock, while simultaneoulsy advacing
the casing that requies in the hole collapsing ground conditions.
• Sungwon offers Hammer Bits with the super performances
and wear resistance to drill deep holes with great accuracy.
• They are well suited for your optimized application in a large
diameter drilling.
• Cluster drills increase Productivity & Job Efficiency
with less noise & vibration• Multiple DTH Hammer working
into one singel canister
• Rotating the casing movement counter-clockwise separately
with Single Auger moving up & down clockwise
• Preventing the hole collapsing while drilling
• Making wider holes at the bottom of the drilled holes by the
expandable head-bit• Securing the higher bearing
capacity, less pile consumption & shorter construction period
• Activating one unit system with the dual mode of Inner Auger Screw &
Outer Steel Casing rotation• The drilling is made simultane-
ously by the combination of both Auger Screw & Steel Casing
• Large diameter excavation & boring can be made
• Securing the straightness of bored holes
PRODuCT LINEuP
DTH Hammer& Bit Auger Machine
small & Medium-sized Hammer
large Diameter Hammer Cluster Drilling Hammer single auger two / Four shaft auger Multi shaft auger
separate auger single auger with expandable bit Doughnut augerbutton bit Overbuden drill bit large Diameter bit
We are ready to serve your company regarding your standard or custom product inquiries & requests.
Please feel free to contact us or send your messages for every kind of requests & inquiries.
OrOkis PrODuCt lineuP
8 9
DTh hAMMER & BIT
Sungwon will strive to offer quality products, services & solutions for maximum value creation to our valuable customers.
CONTENTS
sMall sizeD
PriMe ManuFaCturinG PrOCess
DtH HaMMer
CD HaMMer
HaMMer bit
OverburDen Drill bit
rinG bit
MeDiuM sizeD
larGe sizeD
4” DTH HAMMER
5” DTH HAMMER
6” DTH HAMMER
8” DTH HAMMER
10” DTH HAMMER
12” DTH HAMMER
14” DTH HAMMER
15” DTH HAMMER
16” DTH HAMMER
18” DTH HAMMER
24” DTH HAMMER
28” DTH HAMMER
40” DTH HAMMER
18222630
3335
40434446485051
10
12
14
15
16
17
DtH HaMMer
10 11
PRIME MANufACTuRING PROCESS
We are ready to serve your company regarding your standard or custom product inquiries & requests. Please feel free to contact us or
send your messages for every kind of requests & inquiries.
“OROKIS” IS A GLOBAL BRAND IDENTITY OF SUNGWON HEAVY MACHINERY.
Customer Delight
respect for Humanity’s life and Dignity
Creation of new value
leader of innovative Change
01 02 03 04 05 06
Getting the proven materials & parts ready under the total inspection of them according to the exacting standards.
A required machining is performed by the latest CNC machines before the Heat Treatment process.
Heat treatment is performed according to the highest standards to achieve the robust quality products for meeting the hardest requirement.
Final machining is carried out to exactly meet the customer's full requirement.
All parts are assembled into one unit along with the painting process.
The packing is made according to export standard & product is released from the factory.
Materials&
PartsMachining
Final assembly
&Painting
Packing&
shipment
Precision Machining
Heattreatment
10 11
12 13
Hammer Size 4” 5”
Model sWH090D sWH090M sWH090Q sWH090s sWH110D sWH110M sWH110Q sWH110s
Shank Type
Sungwon
Atlas DHD340A QL40 DHD350R QL50Sandvik M40 SD4 M50 SD5Numa
Dia. of Bit Inch(mm) 4 1/8” to 5”(105 to 127) 5 1/8” to 5” 3/4(130 to 146)
Dia. of Hammer mm 98 116
Cylinder Bore mm 78 94
Piston Stroke mm 100 100
Piston Weight Kg 9.96 18
Length(W/out Bit) mm 1081 1103 1071 1090 1071 1090
Weight(W/out Bit) Kg 45 63 62 63 65
Connection Type - API 2 3/8 Reg. Pin API 3 1/2 Reg. Pin
Air Consumption CFM(m³/min)
100PSI(7.0Kg/cm²) - - - - - - - -150PSI(10.5Kg/cm²) 240(6.8) 290(8.2) 240(6.8) 290(8.2)200PSI(14.0Kg/cm²) 315(8.9) 410(11.6)250PSI(17.6Kg/cm²) 400(11.3) 510(14.4)300PSI(21.0Kg/cm²) 495(14) 620(17.6)350PSI(24.1Kg/cm²) 550(15.5) 750(21.2)
ranGe OF sMall size ranGe OF MeDiuM size
ranGe OF larGe size
Hammer size 10” 12” Model sWH220n sWH220s sWH270 sWH270D sWH270n sWH270s sWH270s1
Shank Type
Sungwon SWH270 Atlas DHD112
Sandvik SD10 (SD12) SD12 SD12- DNuma N100 N120
Dia. of Bit Inch(mm) 9 7/8”~ 14”(250 ~ 355) 11 7/8" ~ 18 3/4" (330 to 475)
Dia. of Hammer mm 226 275 Cylinder Bore mm 165 216
Piston Stroke mm 105 105
Piston Weight Kg 91 125Length(W/out Bit) mm 1524 1480 1753 1772 1750 1753
Weight(W/out Bit) Kg 398 725 683 680 620 682Connection Type - Hex Joint API 6 5/8 Reg. Pin Hex joint API 6 5/8 Reg. Pin
Air Consumption CFM(m³/min)
100PSI(7.0Kg/cm²) 480(13.6) 600(15.3) 150PSI(10.5Kg/cm²) 690(19.5) 880(24.9) 200PSI(14.0Kg/cm²) 980(27.8) 1250(35.4) 250PSI(17.6Kg/cm²) 1290(36.5) 1700(48.1) 300PSI(21.0Kg/cm²) 1610(45.6) 2010(56.8) 350PSI(24.1Kg/cm²) 1820(51.8) 2700(76.4)
Hammer Size 6” 8”
Model sWH140D sWH140M sWH140Q sWH140s sWH180D sWH180Q sWH180s
Shank Type
Sungwon QL80Atlas DHD360 QL60 DHD380
Sandvik M60 SD6 SD-8
Numa
Dia. of Bit Inch(mm) 6” to 7 1/2”(152 to 190) 7 3/4" to 10 5/8" (195 to 270)
Dia. of Hammer mm 140 185
Cylinder Bore mm 118 150
Piston Stroke mm 100 125 100 100
Piston Weight Kg 20 22 20 50
Length(W/out Bit) mm 1150 1130 1166 1388 1370 1388
Weight(W/out Bit) Kg 104 106 104 200
Connection Type - API 3 1/2 Reg. Pin API 4 1/2 Reg. Pin
API 3 1/2 Reg. Pin
API 4 1/2 Reg. Pin
Air Consumption CFM(m³/min)
100PSI(7.0Kg/cm²) - - - - - - -
150PSI(10.5Kg/cm²) 400(11.3) 420(11.9) 610(17.3) 510(14.4)200PSI(14.0Kg/cm²) 545(15.4) 580(16.4) 830(23.5) 690(19.5)250PSI(17.6Kg/cm²) 700(19.8) 740(20.9) 1070(30.3) 890(25.2)300PSI(21.0Kg/cm²) 860(24.4) 910(25.8) 1315(37.2) 1090(30.9)350PSI(24.1Kg/cm²) 1025(29) 1060(29) - - -
Hammer size 14” 15” 16” 18” 24” 28” 40”Model sWH320 sWH320n sWH320n1 sWH350 sWH370 sWH370s sWH410n sWH410s sWH520 sWH520n sWH640l sWH800l
Shank Type
Sungwon SWH320 SWH350 SWH370 SWH520 SWH640 SWH800 Atlas
Sandvik SD15 SD18
Numa N120 N125 N180 N240
Dia. of Bit Inch(mm) 14"~20 3/4 " (330 to 530) 445~560 17 1/2”~24” (445~610) 18”~26” (460~660) 24”~33 1/2”
(610~850) 28~46 1/4"(700~1175) 910~1500
Dia. of Hammer mm 320 355 374 410 520 635 800
Cylinder Bore mm 240 260 280 310 380 475 600
Piston Stroke mm 115 125 125 150 150 150 150
Piston Weight Kg 156 185 203 273 375 732 732
Length(W/out Bit) mm 1835 1820 1821 1900 1905 1993 2040 1982 1975 2025 2365
Weight(W/out Bit) Kg 1005 990 1150 1248 1205 1832 1861 2965 2947 3820 6600
Connection Type - Hex Joint
API 7 5/8 Reg. Pin
Hex Joint
Hex Joint
API 7 5/8 Reg. Pin
API 7 5/8 Reg. Pin
Hex Joint
API 7 5/8 Reg. Pin
Hex Joint
Hex Joint
Air Consumption CFM(m³/min)
100PSI(7.0Kg/cm²) 850(24) 1015(28.7) 1280(36.2) 1420(40.1) 1760(49.8) 2300(65) 3600(101.8)
150PSI(10.5Kg/cm²) 1150(32.5) 1390(39.3) 1417(40.1) 2140(60.5) 2540(71.9) 3400(96.2) 5330(151)
200PSI(14.0Kg/cm²) 1650(46.7) 1610(45.5) 1750(49.5) 3000(85) 3580(101.4) 4800(135.8) 6505(184)
250PSI(17.6Kg/cm²) 2110(59.7) 2010(56.8) 2140(60.5) 3920(110.9) 5025(142.2) 4429(125.3) 5635(159.4) 7358(208.2)
300PSI(21.0Kg/cm²) 2650(74.9) 2463(69.7) 2619(74.1) 4534(128.3) 4930(139.5) 6325(178.9) 5031(142.3) 6829(193.2) 8527(241.3)
350PSI(24.1Kg/cm²) 3330(94.2) 3075(87) 3258(92.2) 4930(139.5) 5510(155.9) 9935(281.1) 5583(157.9) 7845(222) 9853(278.8)
*Specification and image are subject to alteration without prior notice. *Specification and image are subject to alteration without prior notice.
OrOkis DtH HaMMer
DTh hAMMER
14 15
090 4”
4” Ø105
4 1/2” Ø114
5” Ø127
110 5”
5 ” Ø127
5 1/2” Ø140
5 3/4” Ø146
M6 6”6” Ø152
6 1/2” Ø165
140 7”7” Ø178
7 1/2” Ø190
170180
7” 7 3/4” Ø198
8”
8” Ø202
8 3/8” Ø215
9 1/4” Ø235
10” Ø252
10 5/8” Ø270
DHD380Leaming
6x8
6x10
8x10
ModelOut diameter No of Hammer Weight Air Consumption
Ø Quantity Kg CFM
sW-CD380 380 5” × 3pcs 1,200 1300 ~ 1500
sW-CD445/460 445/4606” × 3pcs 1,570 1800~2000
sW-CD470 470
sW-CD525 5258” × 3pcs
2,600
3000 ~ 3500sW-CD575 575 2,700
sW-CD625 625 10” × 3pcs 3,600
sW-CD975 97512” × 5pcs
8,300 4500 ~ 6000
sW-CD1185 1185 9,500 5500 ~ 6000
sW-CD1485 1485 15” × 5pcs 13,000 5800 ~ 6500
*Specification and image are subject to alteration without prior notice. *Specification and image are subject to alteration without prior notice.
220 10”
10” Ø25210 5/8” Ø270
12” Ø30513 3/4” Ø350
270 12”
11 7/8” Ø30113 3/4” Ø350
15” Ø38015 3/8” Ø390
16” Ø40516 3/4” Ø42517 1/8” Ø43517 1/2” Ø445
320 14”
15” Ø38015 3/8” Ø390
16” Ø40516 3/4” Ø425
17” Ø43017 1/8” Ø43517 1/2” Ø44517 3/4” Ø45018 1/8” Ø46018 3/4” Ø475
350 15”
15” Ø380
15 3/8” Ø390
16 3/4” Ø425
17” Ø430
18 3/4” Ø475
20” Ø508
20 5/8” Ø525
20 7/8” Ø530
21 1/2” Ø550
370 16”
17 1/2” Ø445
17 3/4” Ø450
18 1/8” Ø460
18 3/4” Ø475
20” Ø508
20 5/8” Ø525
20 7/8” Ø530
21 1/16” Ø535
21 1/2” Ø550
22 3/5” Ø575
24” Ø610
410 18”
21 5/8” Ø550
24” Ø610
25 1/2” Ø650
520 24”
24 5/8” Ø625
25 5/8” Ø650
26 4/7” Ø725
28 1/2” Ø725
30 1/2” Ø775
32” Ø810
32 1/4” Ø820
33 1/2” Ø850
640 28”
30 1/2” Ø775
33 1/2” Ø850
37 3/4” Ø960
800 40”
33 1/2” Ø850
38 3/8” Ø975
40 1/7” Ø1020
42 3/8” Ø1075
43 1/4” Ø1100
46 1/4” Ø1175
59” Ø1500
Hammer button bit
SWH Size Inch Size
Hammer button bit
SWH Size Inch Size
Hammer button bit
SWH Size Inch Size
Hammer button bit
SWH Size Inch Size
OrOkis CD HaMMer / HaMMer bit
CD hAMMER
Sungwon offers a rock drilling system called Cluster Drills capable of drilling Ø380mm to Ø 2,000mm diameter holes by combing multiple down-the-hole hammers into a single canister.
hAMMER BIT
*Customized hammer bit available.
extended Hammer
CD Hammer
Flat bit
ss bit
Drop bit
Convex bit
Cone bit
Concave bit
16 17
Type WingBit Gauge Applicable Casing Pipe Guid Bit Hammer Type
Extended(mm)
Retracted(mm)
Max OD(mm)
Min ID(mm)
Normal(Inch)
Device OD(mm)
160 2 214 155 190.7 174.7 7" 157 SD5, DHD350R190 3 230 181 216.3 200.3 8" 183 SD6, DHD360240 3 286 232 267.4 249.4 10" 234 SD8, DHD380280 4 336 277 318.5 297.9 12" 279 SD10, N100315 4 373 318 355.6 336.6 14" 320 SD12, DHD112, N120, SWH270365 4 425 363 406.4 387.4 16" 365 SD12, DHD112, N120, SWH320410 4 478 412 457.2 435.0 18" 424 SD15, SWH350460 4 530 461 508.0 482.6 20" 464 SD15, SWH370, SD18, N180510 4 580 509 558.8 533.4 22" 511 SD18, N180460 4 630 559 609.6 584.2 24" 561 SD18, N180, SWH470600 4 685 600 660.4 613.8 26" 603
N240, SWH520
660 4 737 654 711.2 683.2 28" 656710 4 784 699 758.0 730.0 30" 701750 4 838 750 812.8 787.4 32" 752810 4 886 797 858.0 826.0 34" 799860 4 945 856 914.4 886.4 36" 858900 4 995 906 965.2 937.2 38" 908 SWH520, SWH640960 4 1050 954 1,016.0 984.0 40" 956
SWH640, SWH8001010 4 1100 1002 1,066.8 1,034.0 42" 1004
Type 1 2 3 4 5 6 7 8 9 10 11 12 13 14
**Dra 406 457 475 508 558 609 658 711 812 862 914 1,016 1,066 1,219
***CiP 406 457 475 508 558 609 658 - - - - - - 1,219
*Specification and image are subject to alteration without prior notice.
** DRA: Double Rod Auger, ***CIP: Cast in Place Concrete Piles * Specification and image are subject to alteration without prior notice.
OrOkis OverburDen / Drill bitrinG bit
OvERBuRDEN DRILL BIT
RING BIT
extended retracted
bodyWing bit
Pin ball
RING BIT SYSTEM
Casing Pipe
Overburden drill bit
Casing shoe
DtH Hammer
18 19
sWH090D
NO. Part Name
1 Top sub
2 O-Ring (Top sub)
3 Check Valve
4 Coil Spring
5 Make-up Ring
6 Rigid Valve
7 O-Ring (Rigid Valve)
8 Inner Sleeve
NO. Part Name
1 Top sub
2 O-Ring (Top sub)
3 Check Valve
4 Coil Spring
5 Make-up Ring
6 Rigid Valve
7 O-Ring (Rigid Valve)
8 Inner Sleeve
Hammer Model sWH090D
bit shank type
Sungwon
Atlas DHD340A
Sandvik
Numa
bit Dia. mm 105~127
Hammer Dia. mm 98
Cylinder bore mm 78
Piston stroke mm 100
Piston Weight Kgs 9.96
length (less bit) mm 1081
Weight (less bit) Kgs 45
Connection type API 2 3/8 Reg.Pin
air Consumption CFM(m³/min)
100 psi 7.0 kg/cm2
150 psi 10.5 kg/cm2 240 (6.8)
200 psi 14.0 kg/cm2 315 (8.9)
250 psi 17.6 kg/cm2 400 (11.3)
300 psi 21.0 kg/cm2 495 (14)
350 psi 24.1 kg/cm2 550 (15.5)
NO. Part Name
9 Piston
10 Case
11 Piston Retainer Ring
12 Bushing
13 O-Ring (Bit Retainer Ring)
14 Bit Retainer Ring
15 Drive sub
16 Button Bit
NO. Part Name
9 Piston
10 Case
11 Piston Retainer Ring
12 Bushing
13 O-Ring (Bit Retainer Ring)
14 Bit Retainer Ring
15 Drive sub
16 Button Bit
4” DTh hAMMER
4” DTh hAMMER
sWH090MHammer Model sWH090M
bit shank type
Sungwon
Atlas
Sandvik M40
Numa
bit Dia. mm 105~127
Hammer Dia. mm 98
Cylinder bore mm 78
Piston stroke mm 100
Piston Weight Kgs 9.96
length (less bit) mm 1081
Weight (less bit) Kgs 45
Connection type API 2 3/8 Reg.Pin
air Consumption CFM(m³/min)
100 psi 7.0 kg/cm2
150 psi 10.5 kg/cm2 290 (8.2)
200 psi 14.0 kg/cm2 315 (8.9)
250 psi 17.6 kg/cm2 400 (11.3)
300 psi 21.0 kg/cm2 495 (14)
350 psi 24.1 kg/cm2 550 (15.5)
sMall sizeD DtH HaMMer 4” DtH HaMMer
11 11
12 12
13 13
14 14
15 15
10 10
16 16
1 1
2 2
3 3
4 4
5 5
6 6
7 7
8 8
9 9
20 21
4” DTh hAMMER
4” DTh hAMMER
sMall sizeD DtH HaMMer 4” DtH HaMMer
Hammer Model sWH090Q
bit shank type
Sungwon
Atlas QL40
Sandvik
Numa
bit Dia. mm 105~127
Hammer Dia. mm 98
Cylinder bore mm 78
Piston stroke mm 100
Piston Weight Kgs 9.96
length (less bit) mm 1081
Weight (less bit) Kgs 45
Connection type API 2 3/8 Reg.Pin
air Consumption CFM(m³/min)
100 psi 7.0 kg/cm2
150 psi 10.5 kg/cm2 240 (6.8)
200 psi 14.0 kg/cm2 315 (8.9)
250 psi 17.6 kg/cm2 400 (11.3)
300 psi 21.0 kg/cm2 495 (14)
350 psi 24.1 kg/cm2 550 (15.5)
sWH090Q
11
12
13
14
15
10
16
1
2
3
4
5
6
7
8
9
NO. Part Name
1 Top sub
2 O-Ring (Top sub)
3 Check Valve
4 Coil Spring
5 Make-up Ring
6 Rigid Valve
7 O-Ring (Rigid Valve)
8 Inner Sleeve
NO. Part Name
9 Piston
10 Case
11 Piston Retainer Ring
12 Bushing
13 O-Ring (Bit Retainer Ring)
14 Bit Retainer Ring
15 Drive sub
16 Button Bit
sWH090sHammer Model sWH090s
bit shank type
Sungwon
Atlas
Sandvik SD4
Numa
bit Dia. mm 105~127
Hammer Dia. mm 98
Cylinder bore mm 78
Piston stroke mm 100
Piston Weight Kgs 9.96
length (less bit) mm 1103
Weight (less bit) Kgs 45
Connection type API 2 3/8 Reg.Pin
air Consumption CFM(m³/min)
100 psi 7.0 kg/cm2
150 psi 10.5 kg/cm2 240 (6.8)
200 psi 14.0 kg/cm2 315 (8.9)
250 psi 17.6 kg/cm2 400 (11.3)
300 psi 21.0 kg/cm2 495 (14)
350 psi 24.1 kg/cm2 550 (15.5)
11
12
13
14
15
10
16
1
2
3
4
5
6
7
8
9
NO. Part Name
1 Top sub
2 O-Ring (Top sub)
3 Check Valve
4 Coil Spring
5 Make-up Ring
6 Rigid Valve
7 O-Ring (Rigid Valve)
8 Inner Sleeve
NO. Part Name
9 Piston
10 Case
11 Piston Retainer Ring
12 Bushing
13 O-Ring (Bit Retainer Ring)
14 Bit Retainer Ring
15 Drive sub
16 Button Bit
22 23
5” DTh hAMMER
5” DTh hAMMER
sMall sizeD DtH HaMMer 5” DtH HaMMer
sWH110D
NO. Part Name
1 Top sub
2 O-Ring (Top Sub)
3 Check Valve
4 Coil Spring
5 Spacer
6 Make-up Ring
7 Rigid Valve
8 O-Ring (Rigid Valve)
9 Inner Sleeve
NO. Part Name
10 Piston
11 Case
12 Piston Retainer Ring
13 Bushing
14 O-Ring (Bit Retainer Ring)
15 Bit Retainer Ring
16 Drive Sub
17 Button Bit
Hammer Model sWH110D
bit shank type
Sungwon
Atlas DHD350R
Sandvik
Numa
bit Dia. mm 130~146
Hammer Dia. mm 116
Cylinder bore mm 94
Piston stroke mm 100
Piston Weight Kgs 18
length (less bit) mm 1071
Weight (less bit) Kgs 63
Connection type API 3 1/2 Reg.Pin
air Consumption CFM(m³/min)
100 psi 7.0 kg/cm2
150 psi 10.5 kg/cm2 290 (8.2)
200 psi 14.0 kg/cm2 410 (11.6)
250 psi 17.6 kg/cm2 510 (14.4)
300 psi 21.0 kg/cm2 620 (17.6)
350 psi 24.1 kg/cm2 750 (21.2)
12
13
14
15
16
11
17
1
2
3
4
5
6
7
8
9
10
Hammer Model sWH110M
bit shank type
Sungwon
Atlas
Sandvik M50
Numa
bit Dia. mm 130~146
Hammer Dia. mm 116
Cylinder bore mm 94
Piston stroke mm 100
Piston Weight Kgs 18
length (less bit) mm 1090
Weight (less bit) Kgs 62
Connection type API 3 1/2 Reg.Pin
air Consumption CFM(m³/min)
100 psi 7.0 kg/cm2
150 psi 10.5 kg/cm2 290 (8.2)
200 psi 14.0 kg/cm2 410 (11.6)
250 psi 17.6 kg/cm2 510 (14.4)
300 psi 21.0 kg/cm2 620 (17.6)
350 psi 24.1 kg/cm2 750 (21.2)
sWH110M
12
13
14
15
16
11
17
1
2
3
4
5
6
7
8
9
10
NO. Part Name
1 Top sub
2 O-Ring (Top Sub)
3 Check Valve
4 Coil Spring
5 Spacer
6 Make-up Ring
7 Rigid Valve
8 O-Ring (Rigid Valve)
9 Inner Sleeve
NO. Part Name
10 Piston
11 Case
12 Piston Retainer Ring
13 Bushing
14 O-Ring (Bit Retainer Ring)
15 Bit Retainer Ring
16 Drive Sub
17 Button Bit
24 25
5” DTh hAMMER
sWH110sHammer Model sWH110s
bit shank type
Sungwon
Atlas
Sandvik SD5
Numa
bit Dia. mm 130~146
Hammer Dia. mm 116
Cylinder bore mm 94
Piston stroke mm 100
Piston Weight Kgs 18
length (less bit) mm 1090
Weight (less bit) Kgs 65
Connection type API 3 1/2 Reg.Pin
air Consumption CFM(m³/min)
100 psi 7.0 kg/cm2
150 psi 10.5 kg/cm2 290 (8.2)
200 psi 14.0 kg/cm2 410 (11.6)
250 psi 17.6 kg/cm2 510 (14.4)
300 psi 21.0 kg/cm2 620 (17.6)
350 psi 24.1 kg/cm2 750 (21.2)
12
13
14
15
16
11
17
1
2
3
4
5
6
7
8
9
10
NO. Part Name
1 Top sub
2 O-Ring (Top Sub)
3 Check Valve
4 Coil Spring
5 Spacer
6 Make-up Ring
7 Rigid Valve
8 O-Ring (Rigid Valve)
9 Inner Sleeve
NO. Part Name
10 Piston
11 Case
12 Piston Retainer Ring
13 Bushing
14 O-Ring (Bit Retainer Ring)
15 Bit Retainer Ring
16 Drive Sub
17 Button Bit
5” DTh hAMMER
NO. Part Name
1 Top sub
2 O-Ring (Top Sub)
3 Check Valve
4 Coil Spring
5 Spacer
6 Make-up Ring
7 Rigid Valve
8 O-Ring (Rigid Valve)
9 Inner Sleeve
NO. Part Name
10 Piston
11 Case
12 Piston Retainer Ring
13 Bushing
14 O-Ring (Bit Retainer Ring)
15 Bit Retainer Ring
16 Drive Sub
17 Button Bit
sWH110QHammer Model sWH110Q
bit shank type
Sungwon
Atlas QL50
Sandvik
Numa
bit Dia. mm 130~146
Hammer Dia. mm 116
Cylinder bore mm 94
Piston stroke mm 100
Piston Weight Kgs 18
length (less bit) mm 1071
Weight (less bit) Kgs 63
Connection type API 3 1/2 Reg.Pin
air Consumption CFM(m³/min)
100 psi 7.0 kg/cm2
150 psi 10.5 kg/cm2 290 (8.2)
200 psi 14.0 kg/cm2 410 (11.6)
250 psi 17.6 kg/cm2 510 (14.4)
300 psi 21.0 kg/cm2 620 (17.6)
350 psi 24.1 kg/cm2 750 (21.2)
12
13
14
15
16
11
17
1
2
3
4
5
6
7
8
9
10
5” DtH HaMMersMall sizeD DtH HaMMer
26 27
6” DTh hAMMER
6” DTh hAMMER
Hammer Model sWH140M
bit shank type
Sungwon
Atlas
Sandvik M60
Numa
bit Dia. mm 152~190
Hammer Dia. mm 140
Cylinder bore mm 118
Piston stroke mm 125
Piston Weight Kgs 22
length (less bit) mm 1130
Weight (less bit) Kgs 106
Connection type API 3 1/2 Reg.Pin
air Consumption CFM(m³/min)
100 psi 7.0 kg/cm2
150 psi 10.5 kg/cm2 400 (11.3)
200 psi 14.0 kg/cm2 545 (15.4)
250 psi 17.6 kg/cm2 700 (19.8)
300 psi 21.0 kg/cm2 860 (24.4)
350 psi 24.1 kg/cm2 1025 (29)
sMall sizeD DtH HaMMer 6” DtH HaMMer
sWH140M
NO. Part Name
1 Top sub
2 O-Ring (Top Sub)
3 Check Valve
4 Coil Spring
5 Spacer
6 Make-up Ring
7 Rigid Valve
8 O-Ring (Rigid Valve)
9 Inner Sleeve
NO. Part Name
10 Piston
11 Case
12 Piston Retainer Ring
13 Bushing
14 O-Ring (Bit Retainer Ring)
15 Bit Retainer Ring
16 Drive Sub
17 Button Bit
12
13
14
15
16
11
17
1
2
3
4
5
6
7
8
9
10
Hammer Model sWH140D
bit shank type
Sungwon
Atlas DHD360
Sandvik
Numa
bit Dia. mm 152~190
Hammer Dia. mm 140
Cylinder bore mm 118
Piston stroke mm 100
Piston Weight Kgs 20
length (less bit) mm 1150
Weight (less bit) Kgs 104
Connection type API 3 1/2 Reg.Pin
air Consumption CFM(m³/min)
100 psi 7.0 kg/cm2
150 psi 10.5 kg/cm2 400 (11.3)
200 psi 14.0 kg/cm2 545 (15.4)
250 psi 17.6 kg/cm2 700 (19.8)
300 psi 21.0 kg/cm2 860 (24.4)
350 psi 24.1 kg/cm2 1025 (29)
sWH140D
NO. Part Name
1 Top sub
2 O-Ring (Top Sub)
3 Check Valve
4 Coil Spring
5 Spacer
6 Make-up Ring
7 Rigid Valve
8 O-Ring (Rigid Valve)
9 Inner Sleeve
NO. Part Name
10 Piston
11 Case
12 Piston Retainer Ring
13 Bushing
14 O-Ring (Bit Retainer Ring)
15 Bit Retainer Ring
16 Drive Sub
17 Button Bit
12
13
14
15
16
11
17
1
2
3
4
5
6
7
8
9
10
28 29
6” DTh hAMMER
sWH140sHammer Model sWH140s
bit shank type
Sungwon
Atlas
Sandvik SD6
Numa
bit Dia. mm 152~190
Hammer Dia. mm 140
Cylinder bore mm 118
Piston stroke mm 100
Piston Weight Kgs 20
length (less bit) mm 1166
Weight (less bit) Kgs 104
Connection type API 3 1/2 Reg.Pin
air Consumption CFM(m³/min)
100 psi 7.0 kg/cm2
150 psi 10.5 kg/cm2 420 (11.9)
200 psi 14.0 kg/cm2 580 (16.4)
250 psi 17.6 kg/cm2 740 (20.9)
300 psi 21.0 kg/cm2 910 (25.8)
350 psi 24.1 kg/cm2 1060 (29)
12
13
14
15
16
11
17
1
2
3
4
5
6
7
8
9
10
NO. Part Name
1 Top sub
2 O-Ring (Top Sub)
3 Check Valve
4 Coil Spring
5 Spacer
6 Make-up Ring
7 Rigid Valve
8 O-Ring (Rigid Valve)
9 Inner Sleeve
NO. Part Name
10 Piston
11 Case
12 Piston Retainer Ring
13 Bushing
14 O-Ring (Bit Retainer Ring)
15 Bit Retainer Ring
16 Drive Sub
17 Button Bit
6” DTh hAMMER
Hammer Model sWH140Q
bit shank type
Sungwon
Atlas QL60
Sandvik
Numa
bit Dia. mm 152~190
Hammer Dia. mm 140
Cylinder bore mm 118
Piston stroke mm 100
Piston Weight Kgs 20
length (less bit) mm 1166
Weight (less bit) Kgs 104
Connection type API 3 1/2 Reg.Pin
air Consumption CFM(m³/min)
100 psi 7.0 kg/cm2
150 psi 10.5 kg/cm2 400 (11.3)
200 psi 14.0 kg/cm2 545 (15.4)
250 psi 17.6 kg/cm2 700 (19.8)
300 psi 21.0 kg/cm2 860 (24.4)
350 psi 24.1 kg/cm2 1025 (29)
sWH140Q
NO. Part Name
1 Top sub
2 O-Ring (Top Sub)
3 Check Valve
4 Coil Spring
5 Spacer
6 Make-up Ring
7 Rigid Valve
8 O-Ring (Rigid Valve)
9 Inner Sleeve
NO. Part Name
10 Piston
11 Case
12 Piston Retainer Ring
13 Bushing
14 O-Ring (Bit Retainer Ring)
15 Bit Retainer Ring
16 Drive Sub
17 Button Bit
12
13
14
15
16
11
17
1
2
3
4
5
6
7
8
9
10
sMall sizeD DtH HaMMer 6" DtH HaMMer
30 31
8” DTh hAMMER
8” DTh hAMMER
sMall sizeD DtH HaMMer 8” DtH HaMMer
Hammer Model sWH180D
bit shank type
Sungwon
Atlas DHD380
Sandvik
Numa
bit Dia. mm 195~270
Hammer Dia. mm 185
Cylinder bore mm 150
Piston stroke mm 100
Piston Weight Kgs 50
length (less bit) mm 1388
Weight (less bit) Kgs 200
Connection type API 4 1/2 Reg.Pin
air Consumption CFM(m³/min)
100 psi 7.0 kg/cm2
150 psi 10.5 kg/cm2 610 (17.3)
200 psi 14.0 kg/cm2 830 (23.5)
250 psi 17.6 kg/cm2 1070 (30.3)
300 psi 21.0 kg/cm2 1315 (37.2)
350 psi 24.1 kg/cm2
sWH180D
NO. Part Name
1 Top sub
2 O-Ring (Top Sub)
3 Check Valve
4 Coil Spring
5 Spacer
6 Make-up Ring
7 Rigid Valve
8 O-Ring (Rigid Valve)
9 Inner Sleeve
NO. Part Name
10 Stop Ring
11 Piston
12 Case
13 Piston Retainer Ring
14 Bushing
15 O-Ring (Bit Retainer Ring)
16 Bit Retainer Ring
17 Drive Sub
18 Button Bit
13
14
15
16
17
12
18
1
2
3
4
5
6
7
8
9
10
11
13
14
15
16
17
12
18
1
2
3
4
5
6
7
8
9
10
11
Hammer Model sWH180Q
bit shank type
Sungwon QL80
Atlas
Sandvik
Numa
bit Dia. mm 195~270
Hammer Dia. mm 185
Cylinder bore mm 150
Piston stroke mm 100
Piston Weight Kgs 50
length (less bit) mm 1370
Weight (less bit) Kgs 200
Connection type API 3 1/2 Reg.Pin
air Consumption CFM(m³/min)
100 psi 7.0 kg/cm2
150 psi 10.5 kg/cm2 510 (14.4)
200 psi 14.0 kg/cm2 690 (19.5)
250 psi 17.6 kg/cm2 890 (25.2)
300 psi 21.0 kg/cm2 1090 (30.9)
350 psi 24.1 kg/cm2
sWH180Q
NO. Part Name
1 Top sub
2 O-Ring (Top Sub)
3 Check Valve
4 Coil Spring
5 Spacer
6 Make-up Ring
7 Rigid Valve
8 O-Ring (Rigid Valve)
9 Inner Sleeve
NO. Part Name
10 Stop Ring
11 Piston
12 Case
13 Piston Retainer Ring
14 Bushing
15 O-Ring (Bit Retainer Ring)
16 Bit Retainer Ring
17 Drive Sub
18 Button Bit
32 33
8” DTh hAMMER
sWH180sHammer Model sWH180s
bit shank type
Sungwon
Atlas
Sandvik SD8
Numa
bit Dia. mm 195~270
Hammer Dia. mm 185
Cylinder bore mm 150
Piston stroke mm 100
Piston Weight Kgs 50
length (less bit) mm 1388
Weight (less bit) Kgs 200
Connection type API 4 1/2 Reg.Pin
air Consumption CFM(m³/min)
100 psi 7.0 kg/cm2
150 psi 10.5 kg/cm2 510 (14.4)
200 psi 14.0 kg/cm2 690 (19.5)
250 psi 17.6 kg/cm2 890 (25.2)
300 psi 21.0 kg/cm2 1090 (30.9)
350 psi 24.1 kg/cm2
NO. Part Name
1 Top sub
2 O-Ring (Top Sub)
3 Check Valve
4 Coil Spring
5 Spacer
6 Make-up Ring
7 Rigid Valve
8 O-Ring (Rigid Valve)
9 Inner Sleeve
NO. Part Name
10 Stop Ring
11 Piston
12 Case
13 Piston Retainer Ring
14 Bushing
15 O-Ring (Bit Retainer Ring)
16 Bit Retainer Ring
17 Drive Sub
18 Button Bit
13
14
15
16
17
12
18
1
2
3
4
5
6
7
8
9
10
11
sMall / MeDiuM sizeD DtH HaMMer
10” DTh hAMMER
NO. Part Name
1 Top sub
2 Washer
3 O-Ring (Top sub)
4 Check Valve
5 Coil Spring
6 Spacer
7 Make-up Ring
8 Rigid Valve
9 O-Ring (Rigid Valve)
NO. Part Name
10 Inner Sleeve
11 Piston
12 Case
13 Piston Retainer Ring
14 O-Ring (Bit Retainer Ring)
15 Bit Retainer Ring
16 Washer
17 Drive Sub
18 Button Bit
sWH220nHammer Model sWH220n
bit shank type
Sungwon
Atlas
Sandvik
Numa N100
bit Dia. mm 250~355
Hammer Dia. mm 226
Cylinder bore mm 165
Piston stroke mm 105
Piston Weight Kgs 91
length (less bit) mm 1524
Weight (less bit) Kgs 398
Connection type Hexagonal Joint
air Consumption CFM(m³/min)
100 psi 7.0 kg/cm2 480 (13.6)
150 psi 10.5 kg/cm2 690 (19.5)
200 psi 14.0 kg/cm2 980 (27.8)
250 psi 17.6 kg/cm2 1290 (36.5)
300 psi 21.0 kg/cm2 1610 (45.6)
350 psi 24.1 kg/cm2 1820 (51.8)
13
14
15
16
17
12
18
1
2
3
5
4
6
7
8
9
10
11
8” / 10” DtH HaMMer
34 35
10” DTh hAMMER
13
14
15
16
17
12
18
1
2
3
5
4
6
7
8
9
10
11
NO. Part Name
1 Top sub
2 Washer
3 O-Ring (Top sub)
4 Check Valve
5 Coil Spring
6 Spacer
7 Make-up Ring
8 Rigid Valve
9 O-Ring (Rigid Valve)
NO. Part Name
10 Inner Sleeve
11 Piston
12 Case
13 Piston Retainer Ring
14 O-Ring (Bit Retainer Ring)
15 Bit Retainer Ring
16 Washer
17 Drive Sub
18 Button Bit
Hammer Model sWH220s
bit shank type
Sungwon
Atlas
Sandvik SD10
Numa
bit Dia. mm 250~355
Hammer Dia. mm 226
Cylinder bore mm 165
Piston stroke mm 105
Piston Weight Kgs 91
length (less bit) mm 1480
Weight (less bit) Kgs 398
Connection type API 6 5/8 Reg.Pin
air Consumption CFM(m³/min)
100 psi 7.0 kg/cm2 480 (13.6)
150 psi 10.5 kg/cm2 690 (19.5)
200 psi 14.0 kg/cm2 980 (27.8)
250 psi 17.6 kg/cm2 1290 (36.5)
300 psi 21.0 kg/cm2 1610 (45.6)
350 psi 24.1 kg/cm2 1820 (51.8)
sWH220s
12” DTh hAMMER
NO. Part Name
1 Top sub
2 O-Ring (Top sub)
3 Washer
4 Check Valve
5 Coil Spring
6 Spacer
7 Make-up Ring
8 Rigid Valve
9 O-Ring (Rigid Valve)
10 Inner Sleeve
NO. Part Name
11 Stop Ring
12 Piston
13 Case
14 Piston Retainer Ring
15 O-Ring (Bit Retainer Ring)
16 Bit Retainer Ring
17 Bushing
18 Washer
19 Drive Sub
20 Button Bit
sWH270Hammer Model sWH270
bit shank type
Sungwon SWH270
Atlas
Sandvik (SD12)
Numa
bit Dia. mm 330~475
Hammer Dia. mm 275
Cylinder bore mm 216
Piston stroke mm 105
Piston Weight Kgs 125
length (less bit) mm 1753
Weight (less bit) Kgs 725
Connection type Hexagonal Joint
air Consumption CFM(m³/min)
100 psi 7.0 kg/cm2 600 (15.3)
150 psi 10.5 kg/cm2 880 (24.9)
200 psi 14.0 kg/cm2 1250 (35.4)
250 psi 17.6 kg/cm2 1700 (48.1)
300 psi 21.0 kg/cm2 2010 (56.8)
350 psi 24.1 kg/cm2 2700 (76.4)
13
14
15
16
17
18
19
20
1
2
3
5
4
6
7
8
9
10
11
12
MeDiuM sizeD DtH HaMMer 10” / 12” DtH HaMMer
36 37
12” DTh hAMMER
Hammer Model sWH270D
bit shank type
Sungwon
Atlas DHD112
Sandvik
Numa
bit Dia. mm 330~475
Hammer Dia. mm 275
Cylinder bore mm 216
Piston stroke mm 105
Piston Weight Kgs 125
length (less bit) mm 1772
Weight (less bit) Kgs 683
Connection type API 6 5/8 Reg.Pin
air Consumption CFM(m³/min)
100 psi 7.0 kg/cm2 600 (15.3)
150 psi 10.5 kg/cm2 880 (24.9)
200 psi 14.0 kg/cm2 1250 (35.4)
250 psi 17.6 kg/cm2 1700 (48.1)
300 psi 21.0 kg/cm2 2010 (56.8)
350 psi 24.1 kg/cm2 2700 (76.4)
sWH270D13
14
15
16
17
18
19
20
1
2
3
5
4
6
7
8
9
10
11
12
NO. Part Name
1 Top sub
2 O-Ring (Top sub)
3 Washer
4 Check Valve
5 Coil Spring
6 Spacer
7 Make-up Ring
8 Rigid Valve
9 O-Ring (Rigid Valve)
10 Inner Sleeve
NO. Part Name
11 Stop Ring
12 Piston
13 Case
14 Piston Retainer Ring
15 O-Ring (Bit Retainer Ring)
16 Bit Retainer Ring
17 Bushing
18 Washer
19 Drive Sub
20 Button Bit
12” DTh hAMMER
sWH270nHammer Model sWH270n
bit shank type
Sungwon
Atlas
Sandvik
Numa N120
bit Dia. mm 330~475
Hammer Dia. mm 275
Cylinder bore mm 216
Piston stroke mm 105
Piston Weight Kgs 125
length (less bit) mm 1750
Weight (less bit) Kgs 680
Connection type API 6 5/8 Reg.Pin
air Consumption CFM(m³/min)
100 psi 7.0 kg/cm2 600 (15.3)
150 psi 10.5 kg/cm2 880 (24.9)
200 psi 14.0 kg/cm2 1250 (35.4)
250 psi 17.6 kg/cm2 1700 (48.1)
300 psi 21.0 kg/cm2 2010 (56.8)
350 psi 24.1 kg/cm2 2700 (76.4)
13
14
15
16
17
18
19
20
1
2
3
5
4
6
7
8
9
10
11
12
NO. Part Name
1 Top sub
2 O-Ring (Top sub)
3 Washer
4 Check Valve
5 Coil Spring
6 Spacer
7 Make-up Ring
8 Rigid Valve
9 O-Ring (Rigid Valve)
10 Inner Sleeve
NO. Part Name
11 Stop Ring
12 Piston
13 Case
14 Piston Retainer Ring
15 O-Ring (Bit Retainer Ring)
16 Bit Retainer Ring
17 Bushing
18 Washer
19 Drive Sub
20 Button Bit
MeDiuM sizeD DtH HaMMer 12” DtH HaMMer
38 39
12” DTh hAMMER
sWH270s1Hammer Model sWH270s1
bit shank type
Sungwon
Atlas
Sandvik SD12-D
Numa
bit Dia. mm 330~475
Hammer Dia. mm 275
Cylinder bore mm 216
Piston stroke mm 105
Piston Weight Kgs 125
length (less bit) mm 1753
Weight (less bit) Kgs 682
Connection type API 6 5/8 Reg.Pin
air Consumption CFM(m³/min)
100 psi 7.0 kg/cm2 600 (15.3)
150 psi 10.5 kg/cm2 880 (24.9)
200 psi 14.0 kg/cm2 1250 (35.4)
250 psi 17.6 kg/cm2 1700 (48.1)
300 psi 21.0 kg/cm2 2010 (56.8)
350 psi 24.1 kg/cm2 2700 (76.4)
NO. Part Name
1 Top sub
2 O-Ring (Top sub)
3 Washer
4 Check Valve
5 Coil Spring
6 Spacer
7 Make-up Ring
8 Rigid Valve
9 O-Ring (Rigid Valve)
10 Inner Sleeve
NO. Part Name
11 Stop Ring
12 Piston
13 Case
14 Piston Retainer Ring
15 O-Ring (Bit Retainer Ring)
16 Bit Retainer Ring
17 Bushing
18 Washer
19 Drive Sub
20 Button Bit
13
14
15
16
17
18
19
20
1
2
3
5
4
6
7
8
9
10
11
12
12” DTh hAMMER
sWH270sHammer Model sWH270s
bit shank type
Sungwon
Atlas
Sandvik SD12
Numa
bit Dia. mm 330~475
Hammer Dia. mm 275
Cylinder bore mm 216
Piston stroke mm 105
Piston Weight Kgs 125
length (less bit) mm 1753
Weight (less bit) Kgs 620
Connection type API 6 5/8 Reg.Pin
air Consumption CFM(m³/min)
100 psi 7.0 kg/cm2 600 (15.3)
150 psi 10.5 kg/cm2 880 (24.9)
200 psi 14.0 kg/cm2 1250 (35.4)
250 psi 17.6 kg/cm2 1700 (48.1)
300 psi 21.0 kg/cm2 2010 (56.8)
350 psi 24.1 kg/cm2 2700 (76.4)
NO. Part Name
1 Top sub
2 O-Ring (Top sub)
3 Washer
4 Check Valve
5 Coil Spring
6 Spacer
7 Make-up Ring
8 Rigid Valve
9 O-Ring (Rigid Valve)
10 Inner Sleeve
NO. Part Name
11 Stop Ring
12 Piston
13 Case
14 Piston Retainer Ring
15 O-Ring (Bit Retainer Ring)
16 Bit Retainer Ring
17 Bushing
18 Washer
19 Drive Sub
20 Button Bit
13
14
15
16
17
18
19
20
1
2
3
5
4
6
7
8
9
10
11
12
MeDiuM sizeD DtH HaMMer 12” DtH HaMMer
40 41
14” DTh hAMMER
14” DTh hAMMER
larGe sizeD DtH HaMMer 14” DtH HaMMer
NO. Part Name
1 Top sub
2 Washer
3 O-Ring (Top Sub)
4 Check Valve
5 Coil Spring
6 Spacer
7 Make-up Ring
8 Rigid Valve
9 O-Ring (Rigid Valve)
10 Inner Sleeve
NO. Part Name
11 Piston
12 Case
13 Piston Retainer Ring
14 Stop Ring
15 O-Ring (Bit Retainer Ring)
16 Bit Retainer Ring
17 Bushing
18 Washer
19 Drive Sub
20 Button Bit
Hammer Model sWH320
bit shank type
Sungwon SWH320
Atlas
Sandvik
Numa
bit Dia. mm 330~530
Hammer Dia. mm 320
Cylinder bore mm 240
Piston stroke mm 115
Piston Weight Kgs 156
length (less bit) mm 1835
Weight (less bit) Kgs 1005
Connection type Hexagonal Joint
air Consumption CFM(m³/min)
100 psi 7.0 kg/cm2 850 (24)
150 psi 10.5 kg/cm2 1150 (32.5)
200 psi 14.0 kg/cm2 1650 (46.7)
250 psi 17.6 kg/cm2 2110 (59.7)
300 psi 21.0 kg/cm2 2650 (74.9)
350 psi 24.1 kg/cm2 3330 (94.2)
sWH32012
14
13
15
16
17
18
19
20
1
2
3
5
4
6
7
8
9
10
11
sWH320nHammer Model sWH320n
bit shank type
Sungwon
Atlas
Sandvik
Numa N120
bit Dia. mm 330~530
Hammer Dia. mm 320
Cylinder bore mm 240
Piston stroke mm 115
Piston Weight Kgs 156
length (less bit) mm 1820
Weight (less bit) Kgs 990
Connection type API 7 5/8 Reg.Pin
air Consumption CFM(m³/min)
100 psi 7.0 kg/cm2 850 (24)
150 psi 10.5 kg/cm2 1150 (32.5)
200 psi 14.0 kg/cm2 1650 (46.7)
250 psi 17.6 kg/cm2 2110 (59.7)
300 psi 21.0 kg/cm2 2650 (74.9)
350 psi 24.1 kg/cm2 3330 (94.2)
NO. Part Name
1 Top sub
2 Washer
3 O-Ring (Top Sub)
4 Check Valve
5 Coil Spring
6 Spacer
7 Make-up Ring
8 Rigid Valve
9 O-Ring (Rigid Valve)
10 Inner Sleeve
NO. Part Name
11 Piston
12 Case
13 Piston Retainer Ring
14 Stop Ring
15 O-Ring (Bit Retainer Ring)
16 Bit Retainer Ring
17 Bushing
18 Washer
19 Drive Sub
20 Button Bit
12
14
13
15
16
17
18
19
20
1
2
3
5
4
6
7
8
9
10
11
42 43
15” DTh hAMMER
14” DTh hAMMER
larGe sizeD DtH HaMMer 14” / 15" DtH HaMMer
Hammer Model sWH320n1
bit shank type
Sungwon
Atlas
Sandvik
Numa N125
bit Dia. mm 330~530
Hammer Dia. mm 320
Cylinder bore mm 240
Piston stroke mm 115
Piston Weight Kgs 156
length (less bit) mm 1821
Weight (less bit) Kgs 990
Connection type API 7 5/8 Reg.Pin
air Consumption CFM(m³/min)
100 psi 7.0 kg/cm2 850 (24)
150 psi 10.5 kg/cm2 1150 (32.5)
200 psi 14.0 kg/cm2 1650 (46.7)
250 psi 17.6 kg/cm2 2110 (59.7)
300 psi 21.0 kg/cm2 2650 (74.9)
350 psi 24.1 kg/cm2 3330 (94.2)
sWH320n1
NO. Part Name
1 Top sub
2 Washer
3 O-Ring (Top Sub)
4 Check Valve
5 Coil Spring
6 Spacer
7 Make-up Ring
8 Rigid Valve
9 O-Ring (Rigid Valve)
10 Inner Sleeve
NO. Part Name
11 Piston
12 Case
13 Piston Retainer Ring
14 Stop Ring
15 O-Ring (Bit Retainer Ring)
16 Bit Retainer Ring
17 Bushing
18 Washer
19 Drive Sub
20 Button Bit
12
14
13
15
16
17
18
19
20
1
2
3
5
4
6
7
8
9
10
11
NO. Part Name
1 Top sub
2 Washer
3 O-Ring (Top Sub)
4 Check Valve
5 Coil Spring
6 Spacer
7 Make-up Ring
8 Rigid Valve
9 O-Ring (Rigid Valve)
10 Inner Sleeve
NO. Part Name
11 Piston
12 Case
13 Piston Retainer Ring
14 Stop Ring
15 O-Ring (Bit Retainer Ring)
16 Bit Retainer Ring
17 Bushing
18 Washer
19 Drive Sub
20 Button Bit
sWH350Hammer Model sWH350
bit shank type
Sungwon SWH350
Atlas
Sandvik
Numa
bit Dia. mm 445~560
Hammer Dia. mm 355
Cylinder bore mm 260
Piston stroke mm 125
Piston Weight Kgs 185
length (less bit) mm 1900
Weight (less bit) Kgs 1150
Connection type Hexagonal Joint
air Consumption CFM(m³/min)
100 psi 7.0 kg/cm2 1015 (28.7)
150 psi 10.5 kg/cm2 1390 (39.3)
200 psi 14.0 kg/cm2 1610 (45.5)
250 psi 17.6 kg/cm2 2010 (56.8)
300 psi 21.0 kg/cm2 2463 (69.7)
350 psi 24.1 kg/cm2 3075 (87)
12
14
13
15
16
17
18
19
20
1
2
3
5
4
6
7
8
9
10
11
44 45
16” DTh hAMMER
16” DTh hAMMER
larGe sizeD DtH HaMMer 16” DtH HaMMer
NO. Part Name
1 Top sub
2 Washer
3 O-Ring (Top Sub)
4 Check Valve
5 Coil Spring
6 Spacer
7 Make-up Ring
8 Rigid Valve
9 O-Ring (Rigid Valve)
10 Inner Sleeve
NO. Part Name
11 Piston
12 Case
13 Piston Retainer Ring
14 Stop Ring
15 O-Ring (Bit Retainer Ring)
16 Bit Retainer Ring
17 Bushing
18 Washer
19 Drive Sub
20 Button Bit
Hammer Model sWH370
bit shank type
Sungwon SWH370
Atlas
Sandvik
Numa
bit Dia. mm 445~610
Hammer Dia. mm 374
Cylinder bore mm 280
Piston stroke mm 125
Piston Weight Kgs 203
length (less bit) mm 1905
Weight (less bit) Kgs 1248
Connection type Hexagonal Joint
air Consumption CFM(m³/min)
100 psi 7.0 kg/cm2 1280 (36.2)
150 psi 10.5 kg/cm2 1417 (40.1)
200 psi 14.0 kg/cm2 1750 (49.5)
250 psi 17.6 kg/cm2 2140 (60.5)
300 psi 21.0 kg/cm2 2619 (74.1)
350 psi 24.1 kg/cm2 3258 (92.2)
sWH37012
14
13
15
16
17
18
19
20
1
2
3
5
4
6
7
8
9
10
11
sWH370sHammer Model sWH370s
bit shank type
Sungwon
Atlas
Sandvik SD15
Numa
bit Dia. mm 445~610
Hammer Dia. mm 374
Cylinder bore mm 280
Piston stroke mm 125
Piston Weight Kgs 203
length (less bit) mm 1905
Weight (less bit) Kgs 1205
Connection type API 7 5/8 Reg.Pin
air Consumption CFM(m³/min)
100 psi 7.0 kg/cm2 1280 (36.2)
150 psi 10.5 kg/cm2 1417 (40.1)
200 psi 14.0 kg/cm2 1750 (49.5)
250 psi 17.6 kg/cm2 2140 (60.5)
300 psi 21.0 kg/cm2 2619 (74.1)
350 psi 24.1 kg/cm2 3258 (92.2)
NO. Part Name
1 Top sub
2 Washer
3 O-Ring (Top Sub)
4 Check Valve
5 Coil Spring
6 Spacer
7 Make-up Ring
8 Rigid Valve
9 O-Ring (Rigid Valve)
10 Inner Sleeve
NO. Part Name
11 Piston
12 Case
13 Piston Retainer Ring
14 Stop Ring
15 O-Ring (Bit Retainer Ring)
16 Bit Retainer Ring
17 Bushing
18 Washer
19 Drive Sub
20 Button Bit
12
14
13
15
16
17
18
19
20
1
2
3
5
4
6
7
8
9
10
11
46 47
18” DTh hAMMER
18” DTh hAMMER
larGe sizeD DtH HaMMer 18” DtH HaMMer
NO. Part Name
1 Top sub
2 Washer
3 O-Ring (Top Sub)
4 Check Valve
5 Coil Spring
6 Spacer
7 Make-up Ring
8 Rigid Valve
9 O-Ring (Rigid Valve)
10 Inner Sleeve
NO. Part Name
11 Piston
12 Case
13 Piston Retainer Ring
14 Stop Ring
15 Bit Retainer Ring
16 O-Ring (Bit Retainer Ring)
17 Washer
18 Drive Sub
19 Button Bit
Hammer Model sWH410n
bit shank type
Sungwon
Atlas
Sandvik
Numa N180
bit Dia. mm 460~660
Hammer Dia. mm 410
Cylinder bore mm 310
Piston stroke mm 150
Piston Weight Kgs 273
length (less bit) mm 1993
Weight (less bit) Kgs 1832
Connection type API 7 5/8 Reg.Pin
air Consumption CFM(m³/min)
100 psi 7.0 kg/cm2 1420 (40.1)
150 psi 10.5 kg/cm2 2140 (60.5)
200 psi 14.0 kg/cm2 3000 (85)
250 psi 17.6 kg/cm2 3920 (110.9)
300 psi 21.0 kg/cm2 4534 (128.3)
350 psi 24.1 kg/cm2 4930 (139.5)
sWH410n12
13
14
15
16
17
18
19
1
2
3
5
4
6
7
8
9
10
11
sWH410sHammer Model sWH410s
bit shank type
Sungwon
Atlas
Sandvik SD18
Numa
bit Dia. mm 460~660
Hammer Dia. mm 410
Cylinder bore mm 310
Piston stroke mm 150
Piston Weight Kgs 273
length (less bit) mm 2040
Weight (less bit) Kgs 1861
Connection type API 7 5/8 Reg.Pin
air Consumption CFM(m³/min)
100 psi 7.0 kg/cm2 1420 (40.1)
150 psi 10.5 kg/cm2 2140 (60.5)
200 psi 14.0 kg/cm2 3000 (85)
250 psi 17.6 kg/cm2 3920 (110.9)
300 psi 21.0 kg/cm2 4930 (139.5)
350 psi 24.1 kg/cm2 5510 (155.9)
NO. Part Name
1 Top sub
2 Washer
3 O-Ring (Top Sub)
4 Check Valve
5 Coil Spring
6 Spacer
7 Make-up Ring
8 Rigid Valve
9 O-Ring (Rigid Valve)
10 Inner Sleeve
NO. Part Name
11 Piston
12 Case
13 Piston Retainer Ring
14 Stop Ring
15 Bit Retainer Ring
16 O-Ring (Bit Retainer Ring)
17 Washer
18 Drive Sub
19 Button Bit
12
13
14
15
16
17
18
19
1
2
3
5
4
6
7
8
9
10
11
48 49
24” DTh hAMMER
24” DTh hAMMER
larGe sizeD DtH HaMMer 24” DtH HaMMer
NO. Part Name
1 Top sub
2 O-Ring (Top Sub)
3 Washer
4 Check Valve
5 Coil Spring
6 Spacer
7 Make-up Ring
8 Rigid Valve
9 O-Ring (Rigid Valve)
10 Inner Sleeve
NO. Part Name
11 Piston
12 Case
13 Piston Retainer Ring
14 Stop Ring
15 Bit Retainer Ring
16 O-Ring (Bit Retainer Ring)
17 Bushing
18 Washer
19 Drive Sub
20 Button Bit
Hammer Model sWH520
bit shank type
Sungwon SWH520
Atlas
Sandvik
Numa
bit Dia. mm 610~850
Hammer Dia. mm 520
Cylinder bore mm 380
Piston stroke mm 150
Piston Weight Kgs 375
length (less bit) mm 1982
Weight (less bit) Kgs 2965
Connection type Hexagonal Joint
air Consumption CFM(m³/min)
100 psi 7.0 kg/cm2 1760 (49.8)
150 psi 10.5 kg/cm2 2540 (71.9)
200 psi 14.0 kg/cm2 3580 (101.4)
250 psi 17.6 kg/cm2 5025 (142.2)
300 psi 21.0 kg/cm2 6325 (178.9)
350 psi 24.1 kg/cm2 9935 (281.1)
sWH520 12
14
13
15
16
17
18
19
20
1
2
3
5
4
6
7
8
9
10
11
sWH520nHammer Model sWH520n
bit shank type
Sungwon
Atlas
Sandvik
Numa N240
bit Dia. mm 610~850
Hammer Dia. mm 520
Cylinder bore mm 380
Piston stroke mm 150
Piston Weight Kgs 375
length (less bit) mm 1975
Weight (less bit) Kgs 2947
Connection type API 7 5/8 Reg. Pin
air Consumption CFM(m³/min)
100 psi 7.0 kg/cm2 1760 (49.8)
150 psi 10.5 kg/cm2 2540 (71.9)
200 psi 14.0 kg/cm2 3580 (101.4)
250 psi 17.6 kg/cm2 4429 (125.3)
300 psi 21.0 kg/cm2 5031 (142.3)
350 psi 24.1 kg/cm2 5583 (157.9)
NO. Part Name
1 Top sub
2 O-Ring (Top Sub)
3 Washer
4 Check Valve
5 Coil Spring
6 Spacer
7 Make-up Ring
8 Rigid Valve
9 O-Ring (Rigid Valve)
10 Inner Sleeve
NO. Part Name
11 Piston
12 Case
13 Piston Retainer Ring
14 Stop Ring
15 Bit Retainer Ring
16 O-Ring (Bit Retainer Ring)
17 Bushing
18 Washer
19 Drive Sub
20 Button Bit
12
14
13
15
16
17
18
19
20
1
2
3
5
4
6
7
8
9
10
11
50 51
NO. Part Name
1 Top sub
2 O-Ring (Top Sub)
3 Washer
4 Check Valve
5 Coil Spring
6 Rigid Valve
7 O-Ring (Rigid Valve)
8 Inner Sleeve
9 Piston
NO. Part Name
10 Case
11 Piston Retainer Ring
12 Stop Ring
13 Bit Retainer Ring
14 O-Ring (Bit Retainer Ring)
15 Bushing
16 Washer
17 Drive Sub
18 Button Bit
40” DTh hAMMER
28” DTh hAMMER
Hammer Model sWH800l
bit shank type
Sungwon SWH800
Atlas
Sandvik
Numa
bit Dia. mm 910~1500
Hammer Dia. mm 800
Cylinder bore mm 600
Piston stroke mm 150
Piston Weight Kgs 732
length (less bit) mm 2365
Weight (less bit) Kgs 6600
Connection type Hexagonal Joint
air Consumption CFM(m³/min)
100 psi 7.0 kg/cm2 3600 (101.8)
150 psi 10.5 kg/cm2 5330 (151)
200 psi 14.0 kg/cm2 6505 (184)
250 psi 17.6 kg/cm2 7358 (208.2)
300 psi 21.0 kg/cm2 8527 (241.3)
350 psi 24.1 kg/cm2 9853 (278.8)
larGe sizeD DtH HaMMer 28" / 40” DtH HaMMer
sWH640l sWH800lHammer Model sWH640l
bit shank type
Sungwon SWH640
Atlas
Sandvik
Numa
bit Dia. mm 700~1175
Hammer Dia. mm 635
Cylinder bore mm 475
Piston stroke mm 150
Piston Weight Kgs 732
length (less bit) mm 2025
Weight (less bit) Kgs 3820
Connection type Hexagonal Joint
air Consumption CFM(m³/min)
100 psi 7.0 kg/cm2 2300 (65)
150 psi 10.5 kg/cm2 3400 (96.2)
200 psi 14.0 kg/cm2 4800 (135.8)
250 psi 17.6 kg/cm2 5635 (159.4)
300 psi 21.0 kg/cm2 6829 (193.2)
350 psi 24.1 kg/cm2 7845 (222)
NO. Part Name
1 Top sub
2 O-Ring (Top Sub)
3 Washer
4 Check Valve
5 Coil Spring
6 Spacer
7 Make-up Ring
8 Rigid Valve
9 O-Ring (Rigid Valve)
10 Inner Sleeve
NO. Part Name
11 Piston
12 Case
13 Piston Retainer Ring
14 Stop Ring
15 Bit Retainer Ring
16 O-Ring (Bit Retainer Ring)
17 Washer
18 Drive Sub
19 Button Bit
12
13
14
15
16
17
18
19
1
2
3
5
4
6
7
8
9
10
11
10
12
11
13
14
15
16
17
18
1
2
3
5
4
6
7
8
9
52 53
AuGER MAChINE & ACCESSORIES
CONTENTSPriMe ManuFaCturinG PrOCess
auGer
rOD
auGer bit
JOint
Oil-air tank
sHOCk absOrber
aCCessOries
54
56
58
59
60
61
62
63
Sungwon will strive to offer quality products, services & solutions for maximum value creation to our valuable customers.
54 55
PRIME MANufACTuRING PROCESS
We are ready to serve your company regarding your standard or custom product inquiries & requests. Please feel free to contact us or send your
messages for every kind of requests & inquiries.
01 02 03 04 05 06
Getting the proven materials & parts ready under the total inspection of them according to the exacting standards.
Motors and gears providing the rotating force to Augers are assembled to the Auger Frame. Some lubricating oil and grease are applied to activate the normal and smooth movement.
Final assembly and painting are done according to customer's specification.
The packing is made according to export standard & product is released from the factory.
Materials&
Parts
Auger enclosure, Joint and other related parts are processed according to the specification after the welding.
MachiningFinal
assembly &
Painting
semiassembly
Components of Auger case, Joint & others are assembled to do the fitting & interference check among components and to examine completeness and to perform track welding.
CanningPacking
& shipment
“OROKIS” IS A GLOBAL BRAND IDENTITY OF SUNGWON HEAVY MACHINERY.
Customer Delight
respect for Humanity’s life and Dignity
Creation of new value
leader of innovative Change
54 55
56 57
Doughnut auger
Multi-shaft auger
AuGER
auGer sPeCiFiCatiOns
Specification sW-100P-s sW-120P-sa sW-120PW-sa1 sW-120PW-sa2 sW-150PW-sa1 sW-150PW-sa2 sW-200PW-sa
Motor 75Kw × 4 / 8P × 1 90Kw × 4P × 1 45Kw × 4 / 6 / 8P × 2
45Kw × 4 / 6 / 8P × 2 55Kw × 4 / 8P × 2 55Kw × 4 / 8P × 2 75Kw × 4 / 8P × 2
Rotation 34 / 17 14 26.3 / 17.3 / 13.2 19 / 12.5 / 9.5 18 / 9 6.1 / 3.08 4.18 / 2.1
Rated Torque 2,105 / 10,229 5,100 3,300 / 4,900 / 6,640
4,535 / 6,873 / 9,051 5,960 / 11,930 17,430 / 34,788 34,000 / 69,000
C to C 744 850 1300
Power Supply AC 220V(380V) × 60Hz × 3P
Weight 5,000 7,000 8,000 9,000 11,000
Specification sW-120PW-sea sW-150PW-sea1 sW-150PW-sea2 sW-150PW-sea3 sW-200PW-sea1 sW-200PW-sea2 sW-200PW-sea3
Motor 45Kw × 8P × 2 55Kw × 6P × 2 55Kw × 6P × 2 55Kw × 8P × 2 75Kw × 8P × 2 75Kw × 8P × 2 75Kw × 8P × 2
Rotation 13 4.6 4.6 3.24 2.34 1.5 1.09
Rated Torque 6,609 23,350 23,350 33,170 61,196 95,466 134,000
Hole diameter Ø600 Ø650 Ø690 Ø870 Ø1000 Ø1200 Ø1500
C to C 744 850 1000 1300
Power supply AC 220V(380V) × 60Hz × 3P
Weight 6,000 8,000 10,500 11,500 13,500 20,500
single auger
separate auger
Specification sW-150PW-Da sW-200PW-Da
Motor 55Kw × 8P × 2 75Kw × 8P × 2
RotationSpeed
Screw 4.4
Casing 1.7
RatedTorque
Screw 24,409 32,500
Casing 63,176 84,200
C to C 655
Power Supply AC220V(380V) × 60Hz × 3P
Weight 12,500
OrOkis auGer MaCHine
Specification 2 Shaft Auger 4 Shaft Auger
Specification3 Shaft Auger
sW-240PW sW-300PW sW-350PW sW-350PW sW-150PW-Ma3
Motor 90Kw × 4 / 8P × 2 110Kw × 4 / 8P × 2 132Kw × 4 / 8P × 2 132Kw × 6P × 2 Motor 55Kw × 8P × 2
Rotation Speed 40 / 20 40 / 20 40 / 20 20 Rotation
Speed
Rod-In 14.8 12.5
Rod-Out 15.2 13
Rated Torque 4,300 / 8,600 5,388 / 10,735 6,265 / 12,530 12,530 RatedTorque
Rod-In 7,250 8,500
Rod-Out 7,060 8,200
C to C 860 1100 C to C 655
Power Supply AC220V(380V) × 60Hz × 3P Power Supply AC 220V(380V) × 60Hz × 3P
Weight 14,500 15,000 20,000 Weight 9,500
For Rod & Casing operation (2 in 1 function)
Doughnut auger
For Ground Improvement & Sea [beach] Wall Foundation work using DCM construction method
For Rod operation
Multi shaft auger
For Casing operation
separate augersingle auger
*Specification and image are subject to alteration without prior notice.*The "RPM" specification can be custom-made.
*Specification and image are subject to alteration without prior notice.*The "RPM" specification can be custom-made.
58 59
ROD AuGER BIT
Classification screw rod Mixing rod-1 PrD rod Mixing rod-2
Application For Screw Bit & Hammer for 3-Shaft For Screw Bit & Hammer For 2-Shaft
Length Max 9m 5m Max 9m 4m
Outer Diameter Ø300~Ø1470 Ø300~Ø800 Ø300~Ø1470 Ø400~Ø1500
Specification soil bit soft rock bit Mixing bit
Length 1m
Outer Diameter Ø300~Ø1470 Ø300~Ø1470 Ø300~Ø1400
OrOkis rOD / auGer bit
expandable bit
screw rod Mixing rod-1 soil bit
Mixing bit
soft rock bit
PrD rod Mixing rod-2
*Specification and image are subject to alteration without prior notice.
*Specification and image are subject to alteration without prior notice.
60 61
JOINT OIL-AIR TANK
type standard−Ⅰ standard−Ⅱ
Application Under 370 Hammer Under 640 Hammer
Quantity of Port Under 3 ports Minimum 5 ports
Large type 75 200
Pressure(Kg/cm2) 24 24
rOD JOint / Oil-air tank
Type Model Male Female
Øa b c c' d ØA B C C' D
a
40H 150 203 120 - 100 150 293 120 - 101
60H 190 203 120 - 120 190 316 120 - 121
80H 227 240 100 - 154 227 360 100 - 155
120H 280 240 100 - 189 280 380 100 - 180
b
80M 216 340 150 240 139 216 435 150 240 140
120M 267 340 140 - 179 267 410 140 - 180
120Hl 280 400 150 240 189 280 550 150 240 190
Ct-4 263 270 130 - 174 263 370 130 - 175
120Hs 280 325 135 - 189 280 420 135 - 190
D240H 310 399 160 250 209 310 460 160 250 210
350H 420 399 160 250 250 420 500 160 250 251
*Specification and image are subject to alteration without prior notice.
type-btype-a
type-C type-D
*Specification and image are subject to alteration without prior notice.
62 63
ShOCK ABSORBER ACCESSORIES JOint sHOCk absOrber / aCCessOries
Type shock absorber swivel & shock absorber
Function Absorber Absorber, Hose Rolling
Length 1m 1m
Outer Diameter Ø500 Ø500
Inner Diameter According to Joint Specification
*Specification and image are subject to alteration without prior notice.
leader
band /1 shaft
Guide Pin & sealing tapetopsheave
Casing socketbit tip
band / 2 shaft
Casing Joint swivel screw Wing
sHOCk absOrber
sWivel & sHOCk absOrber
Shock Absorbers are installed between Auger Machines & Rod to absorb and dampen the impact load from DTH Hammer operation.
Swivel & Shock Absorbers are insta l led to make the continuous flight augering together with Shock absorber function.
band / 3 shaft band / 4 shaft
64 65
GLOBAL NETwORKGlObal netWOrk64 65
Canada
ameriCa
Brazil
Chile
argentina
SOUTHAMERICA
NORTHAMERICA
ASIA
PhiliPPinesVietnam
singaPoremalaysia
sri lanka
Pakistaniraq
saudi araBia
united araB emirates
turkeyuzBekistan
oman
leBanonalgeria
south afriCa
italyfranCe
taiwan
australia
China
thailand
EUROPE
AFRICA
OCEANIA
SUONGWON
russia
hong kong
singaporeMultipurpose High building
application Model : SW-200PW Separate
Auger, SW-150PW Single Auger
Material : PRD Rod (ø1000, ø1200),
Air Hammer, Bit (ø800, ø1000), Band
singaporeMarina Coastal expressway
application Model : SW-240PW twin shaft Auger,
SW-300PW twin shaft Auger
Material : Mixing Stirring bit, Plant, Stir Bit, Plant,
Silo, Guide, Rod Band
vietnamHospital of st. andrew
Material : Auger Machine SW-150PW &
SW-200PW Single Auger (ø600, ø1000)
taiwanMultipurpose building
application Model : Drill Pipe (ø1000),
DTH Hammer (ø1000), Extension bullet bit
(ø1200~ø1300), Oil Tank, R-rod.
Material : Oil Unit, Band, PRD Rod
JapanMultipurpose building
application Model : SW-150PW Single Auger
(Overburden bit type)
Material : Screw Rod (ø1200, ø1300, ø1500)
over 200 unit, Expansion Bit, Rod Band,
Casing Socket
vietnamMultipurpose building
application Model : SW-120PW Single Auger
SW-150PW Separate Auger (ø625)
Material : Screw rod (ø625, ø425),
Bit Head for Rock (ø620), Casing 72M (ø660, ø457),
Air Oil Unit, Top, Sheave, Casing Socket
ChinaConstruction of new City
Material : Auger Machine SW-120PW,
SW-200 PW, Air Hammer, Hammer Bit…etc
saudi arabiaMultipurpose building
application Model : SW-150PW Separate
Auger (ø800, ø650), SW-120PW Single Auger
Material : Screw Rod (ø600, ø800, ø1000),
Bit (ø600, ø800, ø1000), Rod Band,
Casing Socket
Hong kongMultipurpose building
application Model : SW-150PD Doughnut
Auger Hong Kong
Material : PRD ROD (ø800, ø1000),
Air Hammer Bit (ø800, ø1000), Band
OmanMultipurpose building
application Model : SW-150PW Separate
Auger, SW-120PW Upper Single Auger
Material : Screw Rod (ø600), Bit, Rod Band,
Casing Socket
Dubai, uaeMultipurpose building
Material : Bucket (ø900~ø1200),
(ø1500~ø1800)
Dubai, uaeMultipurpose building
application Model : Screw Rod (ø600, ø800,
ø1000, ø1200) 100 pcs, Bit (ø600, ø800, ø1000,
ø1200), Absorber, Oil Unit, Band, Casing Socket
eritreaConstruction of new Dock in red sea
Material : Air Hammer,
Screw Rod (ø800, ø1000), Bit (ø800, ø1000)
saudi arabiaMultipurpose building
application Model : SW-150PW Separate
Auger (ø1000), SW-120PW (4/6) Single Auger
3 Sets
Malaysiabridge expansion works
application Model : SW-200PW Separate
Doughnut Auger, SW-150PW Single Auger
Material : Screw rod (ø1000, ø1200), Bit (ø1000,
ø1200), Band, Casing socket, Supporter for
screw rod, Safety guard when casing assembling.
miDDle eaST & aFRiCa
aSia
SUNGWON HEAVY MACHINERY CO., LTD. [15084] 249, Huimanggongwon-ro, Siheung-si, Gyeonggi-do, South Koreatel: +82-31-434-8901-5 Fax: +82-31-434-8906 e-mail: [email protected] Web: www.sungwon7.co.kr