optical characterization of inorganic semiconductors
TRANSCRIPT
![Page 1: Optical Characterization of Inorganic Semiconductors](https://reader033.vdocuments.us/reader033/viewer/2022050614/5a6d72db7f8b9af8418b5783/html5/thumbnails/1.jpg)
Lecture 7
Optical Characterization of Inorganic Semiconductors Dr Tim Veal, Stephenson Institute for Renewable Energy
and Department of Physics, University of Liverpool
Nov 5, 2015
![Page 2: Optical Characterization of Inorganic Semiconductors](https://reader033.vdocuments.us/reader033/viewer/2022050614/5a6d72db7f8b9af8418b5783/html5/thumbnails/2.jpg)
Lecture OutlineL7
Lecture 7: Optical properties of semiconductors
• Optical spectroscopy in PV research
• Optical spectroscopies, methods and proceses
Transmission, reflection, absorption, photoluminescence
• Phenomena/properties determined by optical spectroscopy
• Band gap type and energy determination: methods and pitfalls
• Some case studies
![Page 3: Optical Characterization of Inorganic Semiconductors](https://reader033.vdocuments.us/reader033/viewer/2022050614/5a6d72db7f8b9af8418b5783/html5/thumbnails/3.jpg)
Optical Spectroscopy in PV L7
Need to measure optical properties of new and sustainable materials to determine
Suitability for PV applications
What band structure properties do we want from a PV absorber?
Band gap size, type?
Free carriers?
![Page 4: Optical Characterization of Inorganic Semiconductors](https://reader033.vdocuments.us/reader033/viewer/2022050614/5a6d72db7f8b9af8418b5783/html5/thumbnails/4.jpg)
Conversion efficiency
Eg
cb
vbEF
hn
Ener
gy
![Page 5: Optical Characterization of Inorganic Semiconductors](https://reader033.vdocuments.us/reader033/viewer/2022050614/5a6d72db7f8b9af8418b5783/html5/thumbnails/5.jpg)
Conversion efficiency
Eg
cb
vbEF
hn
p-type n-type
hn
One electron per photon Eg = energy available from each
![Page 6: Optical Characterization of Inorganic Semiconductors](https://reader033.vdocuments.us/reader033/viewer/2022050614/5a6d72db7f8b9af8418b5783/html5/thumbnails/6.jpg)
Power at ground level is about 1000 W/m2
![Page 7: Optical Characterization of Inorganic Semiconductors](https://reader033.vdocuments.us/reader033/viewer/2022050614/5a6d72db7f8b9af8418b5783/html5/thumbnails/7.jpg)
Shockley – Queisser efficiency limit
L M Peter
![Page 8: Optical Characterization of Inorganic Semiconductors](https://reader033.vdocuments.us/reader033/viewer/2022050614/5a6d72db7f8b9af8418b5783/html5/thumbnails/8.jpg)
Optical absorptionL7
J. I. Pankove, Optical Processes in Semiconductors, Dover Publications, Inc., 1971.
Absorption is expressed in terms of a coefficient, α(hν), which is defined as the
relative rate of decrease of light intensity L(hν) along its propagation path:
Every initial state Ei is associate with a final state Ef
such that:
Ef = hv – Ei
For parabolic bands, Ef – Eg = ℏ2k2/2me*
and Ei = ℏ2k2/2mh*
dx
hvLd
hLh
)]([
)(
1)
nn
Absorption coeff is proportional to the transition probability from Ei to Ef and also the
density of electrons in the initial state ni and the number of empty final states nf
![Page 9: Optical Characterization of Inorganic Semiconductors](https://reader033.vdocuments.us/reader033/viewer/2022050614/5a6d72db7f8b9af8418b5783/html5/thumbnails/9.jpg)
Optical absorptionL7
J. I. Pankove, Optical Processes in Semiconductors, Dover Publications, Inc., 1971.
Therefore
**
22 11
2he
gmm
kEh
n
It can be shown that the density of states is:
Therefore plot of α2 versus hν for a direct gap gives straight line for absorption edge (see later)
![Page 10: Optical Characterization of Inorganic Semiconductors](https://reader033.vdocuments.us/reader033/viewer/2022050614/5a6d72db7f8b9af8418b5783/html5/thumbnails/10.jpg)
Optical absorptionL7
J. I. Pankove, Optical Processes in Semiconductors, Dover Publications, Inc., 1971.
How thick does an absorber layer need to be so that the majority of photons are absorbed?
I(hv) = I0exp(-α(hv)z), z is the depth in the material, I0 is unattenuated light intensity
The higher the absorption coefficient, the thinner the layer can be.
(Si needs to be thick. CdTe can be thin.)
![Page 11: Optical Characterization of Inorganic Semiconductors](https://reader033.vdocuments.us/reader033/viewer/2022050614/5a6d72db7f8b9af8418b5783/html5/thumbnails/11.jpg)
Optical absorptionL7
J. I. Pankove, Optical Processes in Semiconductors, Dover Publications, Inc., 1971.
)(
)()( 2
pg
pga
EEh
EEhAh
n
nn
)(
)()( 2
pg
pge
EEh
EEhAh
n
nn
For indirect absorption, a phonon is
required for momentum conservation.
For absorption of a phonon of energy,
Ep, the absorption coefficient is given by
and for phonon emission is:
Therefore plot of α1/2 versus hν for an indirect gap gives straight line
for absorption edge (see later)
![Page 12: Optical Characterization of Inorganic Semiconductors](https://reader033.vdocuments.us/reader033/viewer/2022050614/5a6d72db7f8b9af8418b5783/html5/thumbnails/12.jpg)
Optical absorptionL7
J. I. Pankove, Optical Processes in Semiconductors, Dover Publications, Inc., 1971.
)(
)()()(
pg
ea
EEh
hhh
n
nnn
Both phonon emission and absorption are possible for hv > Eg +Ep, so the absorption
coefficient is given by
![Page 13: Optical Characterization of Inorganic Semiconductors](https://reader033.vdocuments.us/reader033/viewer/2022050614/5a6d72db7f8b9af8418b5783/html5/thumbnails/13.jpg)
Optical absorptionL7
![Page 14: Optical Characterization of Inorganic Semiconductors](https://reader033.vdocuments.us/reader033/viewer/2022050614/5a6d72db7f8b9af8418b5783/html5/thumbnails/14.jpg)
Absorption spectrometersL7
Two types of spectrometer are used for absorption: Fourier Transform infrared (FTIR)
UV-vis-near IR spectrophotometer
![Page 15: Optical Characterization of Inorganic Semiconductors](https://reader033.vdocuments.us/reader033/viewer/2022050614/5a6d72db7f8b9af8418b5783/html5/thumbnails/15.jpg)
SnS2 optical absorptionL7
L. Burton, T. D. Veal, A. Walsh, et al., submitted to J. Mater. Chem. A
![Page 16: Optical Characterization of Inorganic Semiconductors](https://reader033.vdocuments.us/reader033/viewer/2022050614/5a6d72db7f8b9af8418b5783/html5/thumbnails/16.jpg)
SnS2 optical absorptionL7
![Page 17: Optical Characterization of Inorganic Semiconductors](https://reader033.vdocuments.us/reader033/viewer/2022050614/5a6d72db7f8b9af8418b5783/html5/thumbnails/17.jpg)
SnS2 optical absorptionL7
![Page 18: Optical Characterization of Inorganic Semiconductors](https://reader033.vdocuments.us/reader033/viewer/2022050614/5a6d72db7f8b9af8418b5783/html5/thumbnails/18.jpg)
Temperature dependenceL7
Temperature dependence of band gap of semiconductors is due to:
• Dilation of the lattice due to increasing temperature
• T-dependent electron phonon interactions
Most commonly used and simple parameterization of T
dependence of semiconductor band gaps is that of Varshni
(Physica 34 (1967)149) but many more detailed treatments exist.
where α and β are experimental determined parameters.
T
TETE
gg
2
)0()(
![Page 19: Optical Characterization of Inorganic Semiconductors](https://reader033.vdocuments.us/reader033/viewer/2022050614/5a6d72db7f8b9af8418b5783/html5/thumbnails/19.jpg)
CuSbS2: T dependent absorption spectra
1.4 1.5 1.6 1.7 1.8 1.9 2.0 2.10.0
2.0x104
4.0x104
6.0x104
8.0x104
1.0x105
Eg(d)
= 1.598 eV
Ab
so
rptio
n c
oe
ffic
ien
t (c
m-1)
Photon energy (eV)
4 K
10 K
20 K
30 K
40 K
50 K
60 K
70 K
80 K
90 K
100 K
125 K
150 K
175 K
200 K
250 K
300 K
Eg(d)
= 1.687 eV
Clear trend of
increasing
absorption edge as T
is reduced
Feature at 1.83 eV is
unidentified, but
reduces in intensity
as T is increased.
![Page 20: Optical Characterization of Inorganic Semiconductors](https://reader033.vdocuments.us/reader033/viewer/2022050614/5a6d72db7f8b9af8418b5783/html5/thumbnails/20.jpg)
CuSbS2: T dependent absorption spectra
1.4 1.5 1.6 1.7 1.8 1.9 2.0 2.1
104
105
Absorp
tion c
oeffic
ient (c
m-1)
Photon energy (eV)
4 K
10 K
20 K
30 K
40 K
50 K
60 K
70 K
80 K
90 K
100 K
125 K
150 K
175 K
200 K
250 K
300 K
![Page 21: Optical Characterization of Inorganic Semiconductors](https://reader033.vdocuments.us/reader033/viewer/2022050614/5a6d72db7f8b9af8418b5783/html5/thumbnails/21.jpg)
1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.90.0
2.0x104
4.0x104
6.0x104
8.0x104
1.0x105
1.2x105
Absorp
tion c
oeffic
ient (c
m-1)
Photon energy (eV)
4 K
CuSbS2: absorption indirect band gap
α=A(hν-Eg)2
Eg = 1.56 eV
![Page 22: Optical Characterization of Inorganic Semiconductors](https://reader033.vdocuments.us/reader033/viewer/2022050614/5a6d72db7f8b9af8418b5783/html5/thumbnails/22.jpg)
1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.90.0
2.0x104
4.0x104
6.0x104
8.0x104
1.0x105
1.2x105
Ab
so
rption
coe
ffic
ien
t (c
m-1)
Photon energy (eV)
4 K
CuSbS2: absorption direct band gap
α=A(hν-Eg)1/2
Eg = 1.69 eV
![Page 23: Optical Characterization of Inorganic Semiconductors](https://reader033.vdocuments.us/reader033/viewer/2022050614/5a6d72db7f8b9af8418b5783/html5/thumbnails/23.jpg)
0 50 100 150 200 250 3001.575
1.600
1.625
1.650
1.675
1.700
Direct band gap
Varshni T dependence
Direct band g
ap (
eV
)
Temperature (K)
Eg(T) = E
g(0) - AT
2/(B+T)
Eg(0) = 1.687 eV
A = 0.411meV/K
B = 106 K
CuSbS2: T dependent direct band gap
![Page 24: Optical Characterization of Inorganic Semiconductors](https://reader033.vdocuments.us/reader033/viewer/2022050614/5a6d72db7f8b9af8418b5783/html5/thumbnails/24.jpg)
Temperature dependenceL7
Why does the temperature dependence of the band gap
matter for new and sustainable photovoltaic absorbers?
Solar cells operate over a significant range of
temperatures due to:
• range of ambient temperatures they are subjected to
• heating by solar radiation
Range of temperatures could be 0 to 60°C
![Page 25: Optical Characterization of Inorganic Semiconductors](https://reader033.vdocuments.us/reader033/viewer/2022050614/5a6d72db7f8b9af8418b5783/html5/thumbnails/25.jpg)
Temp. effects on solar cellsL7
Temperature increase results in:
Short circuit current JSC slightly increasing due to increased
light absorption due to decrease in band gap
Open circuit voltage and fill factor decrease with increase temp.
due to decrease in band gap
Fall in VOC dominates T dependence
As an example, for Si, VOC falls by about 2.3 mV per °C temp.
increase*
So about 115 mV fall in VOC for 50°C temp. Increase, leading to
significant fall in device efficiency
*Martin Green, Solar Cells. Operating Principles, Technology and System Applications (Prentice Hall, 1982)
![Page 26: Optical Characterization of Inorganic Semiconductors](https://reader033.vdocuments.us/reader033/viewer/2022050614/5a6d72db7f8b9af8418b5783/html5/thumbnails/26.jpg)
Low T absorption and DFTL7
First principles computational methods (density functional theory)
are increasingly being used to understand existing materials and
design ones for photovoltaics.
Density functional theory has
traditionally been really bad at
predicting band gaps. But now
with hybrid functional it is
generally reasonably good
However, DFT calculated
properties at 0 K, so we need
experimental data at low temp
to compare with the calculations.
J. Furthmueller, F. Fuchs and F. Bechstedt, in
T. D. Veal (Ed.) Indium Nitride and Related Alloys
(CRC Press, 2009)
![Page 27: Optical Characterization of Inorganic Semiconductors](https://reader033.vdocuments.us/reader033/viewer/2022050614/5a6d72db7f8b9af8418b5783/html5/thumbnails/27.jpg)
CuSbS2: DFT band structure (HSE06)
DFT HSE06
Indirect Eg = 1.67 eV
Direct Eg = 1.82 eV
4 K exp values:
Indirect Eg = 1.56 eV
Direct Eg = 1.69 eV
C. Savoury and
D. O. Scanlon, UCL
![Page 28: Optical Characterization of Inorganic Semiconductors](https://reader033.vdocuments.us/reader033/viewer/2022050614/5a6d72db7f8b9af8418b5783/html5/thumbnails/28.jpg)
FTIRL7
FTIR combined transmission and reflection for optical absorption
![Page 29: Optical Characterization of Inorganic Semiconductors](https://reader033.vdocuments.us/reader033/viewer/2022050614/5a6d72db7f8b9af8418b5783/html5/thumbnails/29.jpg)
FTIRL7
FTIR variable angle specular reflectivity for plasma and phonon measurements
![Page 30: Optical Characterization of Inorganic Semiconductors](https://reader033.vdocuments.us/reader033/viewer/2022050614/5a6d72db7f8b9af8418b5783/html5/thumbnails/30.jpg)
PhotoluminescenceL7
Photoluminescence can be powerful for investigating defect related transitions.
![Page 31: Optical Characterization of Inorganic Semiconductors](https://reader033.vdocuments.us/reader033/viewer/2022050614/5a6d72db7f8b9af8418b5783/html5/thumbnails/31.jpg)
PLL7
Photoluminescence of defect related transitions can be very complicated!.
![Page 32: Optical Characterization of Inorganic Semiconductors](https://reader033.vdocuments.us/reader033/viewer/2022050614/5a6d72db7f8b9af8418b5783/html5/thumbnails/32.jpg)
AbsorptionL7
![Page 33: Optical Characterization of Inorganic Semiconductors](https://reader033.vdocuments.us/reader033/viewer/2022050614/5a6d72db7f8b9af8418b5783/html5/thumbnails/33.jpg)
AbsorptionL7
![Page 34: Optical Characterization of Inorganic Semiconductors](https://reader033.vdocuments.us/reader033/viewer/2022050614/5a6d72db7f8b9af8418b5783/html5/thumbnails/34.jpg)
CdSL7
Martin Archibold, Durham PhD thesis (2007)
CdS transmission as a function of film thickness on Pilkington FTO
Transmission cutoff at 2.4eV. Thin films transmit more 2.6 to 3.5 eV light
![Page 35: Optical Characterization of Inorganic Semiconductors](https://reader033.vdocuments.us/reader033/viewer/2022050614/5a6d72db7f8b9af8418b5783/html5/thumbnails/35.jpg)
CdSL7
Martin Archibold, Durham PhD thesis (2007)
CdS transmission as a function of film thickness on Pilkington FTO
Transmission cutoff at 2.4eV. Thin films absorb less 2.6 to 3.5 eV light
![Page 36: Optical Characterization of Inorganic Semiconductors](https://reader033.vdocuments.us/reader033/viewer/2022050614/5a6d72db7f8b9af8418b5783/html5/thumbnails/36.jpg)
CdSL7
Martin Archibold, Durham PhD thesis (2007)
Reducing CdS layer thickness enables more high energy, short wavelength
photon to be harvested
![Page 37: Optical Characterization of Inorganic Semiconductors](https://reader033.vdocuments.us/reader033/viewer/2022050614/5a6d72db7f8b9af8418b5783/html5/thumbnails/37.jpg)
CdSL7
Martin Archibold, Durham PhD thesis (2007)
![Page 38: Optical Characterization of Inorganic Semiconductors](https://reader033.vdocuments.us/reader033/viewer/2022050614/5a6d72db7f8b9af8418b5783/html5/thumbnails/38.jpg)
Indium nitrideL7
T. L. Tansley and C. P. Foley,
J. Appl. Phys. 59, 3241 (1986).
Common cation semiconductor band gaps
InN 1.89 eV
InP 1.35 eV
InAs 0.36 eV
InSb 0.18 eV
Common anion semiconductor band gaps
AlN 6.2 eV
GaN 3.4 eV
InN 1.89 eV
![Page 39: Optical Characterization of Inorganic Semiconductors](https://reader033.vdocuments.us/reader033/viewer/2022050614/5a6d72db7f8b9af8418b5783/html5/thumbnails/39.jpg)
Indium nitrideL7
Figures from T. D. Veal (Ed.) Indium Nitride and Related Alloys (CRC Press, 2009)
Low energy
PL
observed in
2001 at
Ioffe
![Page 40: Optical Characterization of Inorganic Semiconductors](https://reader033.vdocuments.us/reader033/viewer/2022050614/5a6d72db7f8b9af8418b5783/html5/thumbnails/40.jpg)
Indium nitrideL7
Low energy PL
also observed in
2002 at Berkeley
So is indium nitride
a high band gap semiconductor with below band gap defect related absorption and PL
Or a low band gap semiconductor with some other explanation for the previously
observed high energy absorption onset?
![Page 41: Optical Characterization of Inorganic Semiconductors](https://reader033.vdocuments.us/reader033/viewer/2022050614/5a6d72db7f8b9af8418b5783/html5/thumbnails/41.jpg)
Indium nitrideL7
Common cation semiconductors
InN 0.65 eV
InP 1.35 eV
InAs 0.36 eV
InSb 0.18 eV
Common anion
semiconductors
AlN 6.2 eV
GaN 3.4 eV
InN 0.65 eV J. Wu et al., Chapter 7 in T. D. Veal et al. (eds)
Indium Nitride and Related Alloys (CRC Press, 2009)
![Page 42: Optical Characterization of Inorganic Semiconductors](https://reader033.vdocuments.us/reader033/viewer/2022050614/5a6d72db7f8b9af8418b5783/html5/thumbnails/42.jpg)
Indium nitrideL7
![Page 43: Optical Characterization of Inorganic Semiconductors](https://reader033.vdocuments.us/reader033/viewer/2022050614/5a6d72db7f8b9af8418b5783/html5/thumbnails/43.jpg)
Indium nitrideL7
![Page 44: Optical Characterization of Inorganic Semiconductors](https://reader033.vdocuments.us/reader033/viewer/2022050614/5a6d72db7f8b9af8418b5783/html5/thumbnails/44.jpg)
Indium nitrideL7
![Page 45: Optical Characterization of Inorganic Semiconductors](https://reader033.vdocuments.us/reader033/viewer/2022050614/5a6d72db7f8b9af8418b5783/html5/thumbnails/45.jpg)
Indium nitrideL7
Main message from indium nitride is that it is not always
easy to determine the nature and magnitude of a band gap
of new (or sometimes long established) semiconductors!
Before 2000, DFT theory had the band gap of InN as 1.9 eV
Once experiment determined a different value, the theory
then got that value too! Theory can be useful but so can
healthy skepticism.
![Page 46: Optical Characterization of Inorganic Semiconductors](https://reader033.vdocuments.us/reader033/viewer/2022050614/5a6d72db7f8b9af8418b5783/html5/thumbnails/46.jpg)
Indium nitrideL7
![Page 47: Optical Characterization of Inorganic Semiconductors](https://reader033.vdocuments.us/reader033/viewer/2022050614/5a6d72db7f8b9af8418b5783/html5/thumbnails/47.jpg)
Indium nitrideL7
Low density of localized states dominate low temp PL
Absorption edge is determined by high density of band states
![Page 48: Optical Characterization of Inorganic Semiconductors](https://reader033.vdocuments.us/reader033/viewer/2022050614/5a6d72db7f8b9af8418b5783/html5/thumbnails/48.jpg)
SummaryL7
• Optimum band gap for PV determined by solar spectrum and payoff
between absorption and thermal losses
• Thickness of absorber required is determined by absorption coefficient
• Direct band gap significantly better than indirect for PV absorber
• Temp. dependence of band gap influences efficiency mainly via VOC and
low temp. absorption measurements useful to compare with theory
• Optical properties are important, but electrical properties (such as carrier
lifetime) seem to dictate success or otherwise of PV materials:
Si is far from optimal in terms of optical properties 1.2 eV indirect band
gap, but it does pretty well.
![Page 49: Optical Characterization of Inorganic Semiconductors](https://reader033.vdocuments.us/reader033/viewer/2022050614/5a6d72db7f8b9af8418b5783/html5/thumbnails/49.jpg)
L7