Operating InstructionsBefore first use of the unit read these operating instructions and act in accordance with them.

59648680 (08/12)

K 3.550K 3.575 Jubilee

Dear Customer,Please read and comply with these original instructions prior

to the initial operation of your appliance and store them for later use or subsequent own-ers.

This high-pressure cleaner is designed for domestic use only:– to clean machines, vehicles, buildings,

tools, facades, terraces, garden equip-ment etc. using a high-pressure water jet (and detergents if required).

– with accessories, replacement parts and detergents approved by KÄRCH-ER. Observe the instructions provided with these detergents.

The scope of delivery of your appliance is il-lustrated on the packaging. Check the con-tents of the appliance for completeness when unpacking.In the event of missing accessories or any transport damage, please contact your dealer.

� DangerImmediate danger that can cause severe injury or even death.� WarningPossible hazardous situation that could lead to severe injury or even death.CautionPossible hazardous situation that could lead to mild injury to persons or damage to property.

The high pressure jet may not be directed at persons, ani-mals, live electrical equipment or at the appliance itself. Pro-

tect the appliance against frost.

The packaging material can be recy-cled. Please do not place the packag-

ing into the ordinary refuse for disposal, but arrange for the proper recycling.

Old appliances contain valuable ma-terials that can be recycled. Please arrange for the proper recycling of old

appliances. Please dispose your old appli-ances using appropriate collection sys-tems.Notes about the ingredients (REACH)You will find current information about the ingredients at: www.kaercher.com/REACH

The warranty terms published by the rele-vant sales company are applicable in each country. We will repair potential failures of your appliance within the warranty period free of charge, provided that such failure is caused by faulty material or defects in man-ufacturing. In the event of a warranty claim please contact your dealer or the nearest authorized Customer Service centre. Please submit the proof of purchase.

ContentsGeneral information . . . . . . . . . . . . . . 2Safety instructions. . . . . . . . . . . . . . . . 3Description of the Appliance . . . . . . . . 5Operation . . . . . . . . . . . . . . . . . . . . . . 6Transport. . . . . . . . . . . . . . . . . . . . . . . 8Storage . . . . . . . . . . . . . . . . . . . . . . . . 9Maintenance and care . . . . . . . . . . . . 9Troubleshooting . . . . . . . . . . . . . . . . . 10Helpline . . . . . . . . . . . . . . . . . . . . . . . . 11Technical specifications . . . . . . . . . . . 11EC Declaration of Conformity . . . . . . . 12Assembly . . . . . . . . . . . . . . . . . . . . . . 13Spare Parts . . . . . . . . . . . . . . . . . . . . . 15

General information

Proper Use

Scope of delivery

Symbols in the operating instructions

Symbols on the machine

Environmental protection

Warranty

2 English

� Danger Never touch the mains plug and the

socket with wet hands. The appliance must not be used if the

power cord or important parts of the ap-pliance, e.g. high-pressure hoses, trig-ger gun or safety devices are damaged.

Check the power cord and mains plug for damage before every use. If the power cord is damaged, please arrange for it to be replaced immediately by an authorised repair agent or a skilled electrician.

Check the high-pressure hose for dam-age before every use. Please arrange for the immediate replacement of a damaged high-pressure hose.

The appliance may not be used in areas where a risk of explosion is present.

If the appliance is used in hazardous ar-eas (e.g. filling stations) the corre-sponding safety provisions must be observed.

High-pressure jets can be dangerous if improperly used. The jet must not be di-rected at persons, animals, live electri-cal equipment or at the appliance itself.

The high-pressure jet must not be di-rected at other persons or directed by the user at him/herself to clean clothing or footwear.

Never use the appliance to clean ob-jects containing hazardous substances (e.g. asbestos).

Vehicle tyres or tyre valves are suscep-tible to damage from the high-pressure jet and may burst. The first indication of this is a discolouration of the tyre. Dam-aged vehicle tyres/tyre valves are high-ly dangerous. Ensure that a distance of at least 30 cm is observed when clean-ing with the jet!

Risk of explosion!Do not spray flammable liquids.Never draw in fluids containing solvents or undiluted acids and solvents! This in-cludes petrol, paint thinner and heating

oil. The spray mist thus generated is highly inflammable, explosive and poi-sonous. Do not use acetone, undiluted acids and solvents as they are damag-ing to the materials from which the ap-pliance is made.

� Warning The mains plug and the coupling of an

extension cable must be watertight and must never lay in the water.

Unsuitable extension cables can be hazardous. Only use extension cables outdoors which have been approved for this purpose and labelled with a suffi-cient cable cross-section: 1 - 10 m: 1.5 mm2; 10 - 30 m: 2.5 mm2

Always fully unroll electrical cables from the cable drum.

High-pressure hoses, fixtures and cou-plings are important for the safety of the appliance. Only use high-pressure hos-es, fixtures and couplings recommend-ed by the manufacturer.

This appliance is not intended for use by persons with reduced physical, sen-sory or mental capabilities. The appliance must not be operated by children or persons who have not been instructed accordingly.Children should be supervised to pre-vent them from playing with the appli-ance.

Keep packaging film away from children - risk of suffocation!

The operator must use the appliance correctly. When working with the appli-ance, he must consider the local condi-tions and pay due care and attention to other persons, in particular children, who are nearby.

Do not use the appliance when there are other persons around unless they are also wearing safety equipment.

Wear protective clothing and safety goggles to protect against splash back containing water or dirt.

Safety instructions

English 3

Caution In case of extended downtimes, switch

the appliance off at the main switch / ap-pliance switch or remove the mains plug.

Do not operate the appliance at temper-atures below 0 °C.

Observe a distance of at least 30 cm when using the jet to clean painted sur-faces to avoid damaging paintwork.

Never leave the appliance unattended when it is in operation.

Make sure that the power cable or ex-tension cables are not damaged by run-ning over, pinching, dragging or similar. Protect the power cable from heat, oil, and sharp edges.

All current-conducting parts in the work-ing area must be protected against jet water.

The appliance may only be connected to an electrical supply which has been installed in accordance with IEC 60364.

The appliance may only be connected to alternating current. The voltage must correspond with the type plate on the appliance.

For safety reasons, we recommend that you operate the appliance only via a earth-leakage circuit breaker (max. 30 mA).

Cleaning operations which produce oily waste water, e.g. engine washes, un-derbody washes, may only be carried out using washing stations equipped with an oil separator.

This appliance was designed to be used with detergents which are sup-plied or recommended by the manufac-turer. The use of other detergents or chemicals may compromise the safety of the appliance.

The high pressure hose is specially con-structed with reinforced walls to handle wa-ter pressure up to 13 MPa (1900 psi) - it can be easily damaged and should be stored carefully. Do not kink. Do not drive vehicles over the hose. Do not expose the hose to sharp edges

or corners.Misuse will lead to ballooning or premature failure and will invalidate warranty.

CautionSafety devices protect the user and must not be modified or bypassed.

The appliance switch prevents unintention-al operation of the appliance.

This lock locks the lever of the trigger gun and prevents the inadvertent start of the ap-pliance.

The overflow valve prevents the permissi-ble working pressure from being exceeded. If the lever on the trigger gun is released the pressure switch turns off the pump, the high-pressure jet is stopped. If the lever is pulled the pump is turned on again.

CautionCreate stability for the appliance prior to all work on or with the appliance to prevent ac-cidents or damage.– The stability of the appliance is warrant-

ed when it is placed onto an even sur-face.

High pressure hose

Safety Devices

Power switch

Lock trigger gun

Overflow valve with pressure switch

Prerequisites for the appliance's stability

4 English

These operating instructions describe the maximum equipment. Depending on the model, there are differences in the scopes of delivery (see packaging).1 Coupling element for water connection2 High pressure hose3 Quick coupling for high pressure hose4 Water connection with integrated sieve5 Appliance switch "0/OFF“/ „I/ON“6 Dosage regulator for detergent7 Transport handle8 Storage of Plug 'n' Clean detergent bot-

tle with detergent connection9 Plug 'n' Clean detergent bottle with

locking lid10 Storage for high-pressure hose

11 Storage hook for mains connection cable12 Storage for accessories13 Mains cable with mains plug14 Wheels15 Trigger gun16 Lock trigger gun17 Key to detach the high pressure hose

from the trigger gun18 Spray lance with pressure regulation

(Vario Power)19 Spray lance with Dirtblaster K 3.575 Jubilee only .20 Washing brush21 Storage for trigger gun - bottom holder22 Storage for trigger gun - top holder

Description of the Appliance

Assembly see page 13

English 5

Mount loose parts delivered with appliance prior to start-up.Illustrations on Page 13

Illustration Push the wheels into the intake and se-cure with the enclosed plugs, watch for positioning of plug.

Illustration Place the bottom holder into the recess-

es and push forward until it audibly locks in.

Insert the top holder and push down all the way.

You will need the 2 included screws as well as a Philips screwdriver PH 2. Illustration

Slide the transport handle into the guide and secure it with 2 screws.

You will need the 2 included screws as well as a Philips screwdriver PH 2. Illustration

Insert both detergent hoses onto the hose fittings.Install the dosage regulator and con-nect using 2 screws.Note: During installation you must make sure that the tongues of the dos-age regulator match up with the intend-ed recesses in the casing.

Illustration Push the high pressure hose into the trigger gun until it locks audibly.Note: Make sure the connection nipple is aligned correctly.Check the secure connection by pulling on the high pressure hose.

� WarningAccording to the applicable regula-tions, the appliance must never be used on the drinking water supply without a system separator. Use a suitable system separator manufactured by KÄRCHER; or, as an alternative, a system separator as per EN 12729 Type BA. Water flowing through a system separator is con-sidered non-drinkable. CautionAlways connect the system separator to the water supply, never directly to the appli-ance!Note: Impurities in the water can damage the high-pressure pump and accessories. For protection, the use of the KÄRCHER water filter (optional accessory, order no. 4.730-059) is recommended.

Observe regulations of water supplier.For connection values, see type plate/tech-nical data. Use a fibre-reinforced water hose (not

included) with a standard coupling. (Minimum diameter 1/2 inch (13 mm), minimum length 7.5 m).

Illustration Screw the coupling element to the wa-ter connection on the appliance.Push the water supply hose onto the coupling unit, then connect it to the wa-ter supply.

This high-pressure cleaner is suited to work with the KÄRCHER suction hose with back-flow valve (Optional accessory, order no. 4.440-238) to draw in surface water, e.g. from water butts or ponds (see specifica-tions for max. suction height). Fill the KÄRCHER suction hose with

backflow valve with water, screw to wa-ter supply and hang into the water butt.

Separate the high pressure hose from the high pressure connection of the ap-pliance.

Operation

Before Startup

Install wheels

Install the storage for trigger gun (K 3.575 Jubilee only)

Install the transport handle

Install the dosage regulator for detergent

Connect the high pressure hose to the trigger gun

Water supply

Water supply from mains

Drawing in water from open reservoirs

6 English

Switch the appliance on (I/ON) for a max. of 2 minutes and wait until the wa-ter exits the high-pressure connection without bubbles.

Turn off the appliance "0/OFF".

CautionDry runs lasting longer than two minutes lead to damages to the high pressure pump. If the appliance does not build up pressure within two minutes, switch it off and proceed as instructed in the Chapter "Troubleshooting". Illustration

Insert the high pressure hose tightly into the quick coupling on the appliance, it will lock in audibly.Note: Make sure the connection nipple is aligned correctly.Check the secure connection by pulling on the high pressure hose.

Illustration Push the spray lance into the trigger gun and fasten it by turning it through 90°.

Completely open the water tap. Insert the mains plug into the socket. Turn on the appliance “I/ON”.

� DangerThe trigger gun is subjected to a recoil force when the water jet is discharged. Make sure that you have a firm footing and are also holding the trigger gun and spray lance firmly.CautionPrior to cleaning, make sure that the high pressure is placed safely on level ground. Wear protective goggles and protective clothing during the cleaning process. Illustration

Unlock the lever on the trigger gun. Pull on the lever of the trigger gun; the

device will switch on.Note: Release the lever of the trigger gun; the device will switch off again. High pres-sure remains in the system.

Carrying out the most common cleaning tasks. The work pressure can be infinitely regulated between "Min" and "Max". Release the lever on the trigger gun. Turn the spray lance to the desired po-

sition.Note: Suitable for working with detergent; for this, turn the spray lance to the "Mix" po-sition.

For particularly dirty items or areas.CautionCar tyres, paint or sensitive surfaces such as wood should not be cleaned with the dirt blaster, as there is a risk of damage.– Not suitable for use with detergents.

Suitable for use with detergents.

Please use exclusively KÄRCHER deter-gents and care products to carry out the re-spective cleaning task, as these were specifically developed for your appliance. The use of other detergents and care prod-ucts may lead to premature wear and can invalidate your warranty claims. Please ob-tain information at your local dealer or re-quest information directly from KÄRCHER.Notes regarding the detergent: The most commonly used KÄRCHER detergents can be purchased ready to use in their Plug 'n' Clean detergent bottles with locking lids. This will make the pesky refilling and filling processes redundant. Illustration

Remove the lid from the Plug 'n' Clean detergent bottle and press the deter-gent bottle into the detergent connec-tion with the opening facing down.

Illustration Adjust the suction volume of the deter-gent solution by means of the dosage regulator for detergents.

Use spray lance with pressure regula-tion (Vario Power).

Turn the spray lance to "Mix" position.Note: This will mix the detergent with

Start up

Operation

Spray lance with pressure regulation

Spray lance with Dirtblaster

Washing brush

Working with detergent

English 7

the water stream.Note: If required, the washing brushes can be used to work with detergent.

Spray the detergent sparingly on the dry surface and allow it to react, but not to dry.

Spray off loosened dirt with the high-pressure jet.

Release the lever on the trigger gun. Illustration

Lock the lever on the trigger gun. During longer breaks (more than 5 min-

utes), also turn the appliance off using the "0/OFF" switch.

CautionOnly separate the high-pressure hose from the trigger gun or the appliance while there is no pressure in the system. Remove the Plug 'n' Clean detergent

bottle from the intake and close it with the lid. To store, place into the intake ro-tated by 180°.

Release the lever on the trigger gun. Turn off the appliance "0/OFF". Turn off tap. Press the lever on the trigger gun to re-

lease any remaining pressure in the system.

Illustration Lock the lever on the trigger gun.

Detach the appliance from the water supply.Caution: When disconnecting the sup-ply or high pressure hose, warm water may leak from the connections after op-eration.

Pull out the mains plug.

CautionIn order to prevent accidents or injuries, keep in mind the weight of the appliance during transport (see Specifications).

Pull the appliance by its transport handle.

Prior to horizontal transport: Remove the Plug 'n' Clean detergent bottle from the intake and close it with the lid.

Secure the appliance against shifting and tipping over.

Recommended cleaning method

Interrupting operation

Finish operation

Transport

When transporting by hand

When transporting in vehicles

8 English

CautionIn order to prevent accidents or injuries, keep in mind the weight of the appliance when selecting a storage location for it (see Specifications).

Park the machine on an even surface. Press the disconnect on the trigger gun

and remove the high pressure hose from the trigger gun.

Push the casing of the quick coupling for the high pressure hose toward the rear and disconnect the high pressure hose from the appliance.

Stow away the mains cable, the high-pressure hose and accessory at the ap-pliance.

Prior to extended storage periods, as dur-ing the winter, also observe the instructions in the Care section.

CautionProtect the appliance and its accessories against frost.The appliance and its accessories can get destroyed through frost if there are any wa-ter residues in them. To avoid damage to them: Completely drain all water from the ap-

pliance: Switch the appliance on with detached high-pressure hose and de-tached water supply (max. 1 minute) and wait, until no more water exits at the high-pressure connection. Turn off the appliance.

Store the appliance and the entire ac-cessories in a frost-safe room.

� DangerTurn off the appliance and remove the mains plug prior to any care and mainte-nance work.

Prior to longer periods of storage, e.g. in the winter: Remove filter from suction hose for de-

tergent and clean under running water. Pull out the sieve in the water connec-

tion using flat-nose pliers and clean un-der running water.

The appliance is maintenance-free.

Use only original KÄRCHER spare parts. You will find a list of spare parts at the end of these operating instructions.

Special accessories expand the possibili-ties of using your appliance. Please contact your KÄRCHER dealer for further informa-tion.

Storage

Storing the Appliance

Frost protection

Maintenance and care

Care

Maintenance

Spare parts

Special accessories

English 9

You can rectify minor faults yourself with the help of the following overview. If in doubt, please consult the authorized customer service.� DangerTurn off the appliance and remove the mains plug prior to any care and mainte-nance work.Repair works may only be performed by the authorized customer service.

Pull on the lever of the trigger gun; the device will switch on.

Check whether the voltage indicated on the type plate corresponds to the volt-age of the mains supply.

Check the mains connection cable for damages.

Check setting at the spray lance. Appliance ventilation: Switch the appli-

ance on with the high-pressure hose detached and operate (max. 2 minutes) until the water exits the high-pressure connection without bubbles. Switch off appliance and reconnect high-pressure hose.

Check the water supply. Pull out the sieve in the water connec-

tion using flat-nose pliers and clean un-der running water.

Cause: Voltage reduction due to weak mains supply or when using an extension cable. When switching on, first pull the lever of

the trigger gun and then switch the ap-pliance switch to "I/ON".

Clean high-pressure nozzle: Remove dirt and debris from the nozzle bore, us-ing a needle and rinse through with wa-ter from the front.

Check water flow quantity.

Slight leakage from the appliance pump is normal. If the leakage increases con-tact the authorized customer service.

Use spray lance with pressure regula-tion (Vario Power).Turn the spray lance to "Mix" position.

Check the settings at the dosage regu-lator for detergent.

Check whether the Plug 'n' Clean deter-gent bottle is placed into the detergent connection facing down.

Check the detergent suction hose for kinks.

Troubleshooting

Appliance is not running

Pressure does not build up in the appliance

Appliance does not start, motor hums

Strong pressure fluctuations

Appliance is leaking

No detergent infeed

10 English

KÄRCHER UK Limited operates a helpline allowing customers to discuss any prob-lems experienced with our products.The helpline operates during normal busi-ness hours and may be busy at peak peri-ods.If you have difficulty getting through we would ask that you try to contact us again later in the day.

The helpline number is 01295 752200, open from 8.30 am to 5.00 pm Monday to Friday.

It helps us if you have the model number and data plate details to hand before mak-ing your call so that we can assist you with your query more effectively.

Alternatively you may write to us at the address below:KÄRCHER UK LtdKärcher HouseBeaumont RoadBanburyOxon, OX16 1TB

or E-mail us:info@karcher.co.uk

Subject to technical modifications!

Helpline Technical specificationsElectrical connectionVoltage 230-240

1~50VHz

Connected load 1,8 kWProtection class IP X5Protective class IMains fuse (slow-blow) 13 AWater connectionMax. feed pressure 0,8 MPaMax. feed temperature 40 °CMin. feed volume 10 I/minMax. Suction height 0,5 mPerformance dataWorking pressure 11 MPaMax. permissible pressure 12 MPaWater flow rate 6,3 I/minDetergent flow rate 0,3 I/minRecoil force of trigger gun 15 NDimensions and weightsLength 300 mmWidth 325 mmHeight 876 mmWeight, ready to operate with accessories

13,0 kg

Values determined as per EN 60335-2-79Hand-arm vibration valueUncertainty K

<2,50,3

m/s2

m/s2

Sound pressure level LpAUncertainty KpA

732

dB(A)dB(A)

Sound power level LWA + Uncertainty KWA

89 dB(A)

English 11

We hereby declare that the machine de-scribed below complies with the relevant basic safety and health requirements of the EU Directives, both in its basic design and construction as well as in the version put into circulation by us. This declaration shall cease to be valid if the machine is modified without our prior approval.

The undersigned act on behalf and under the power of attorney of the company man-agement.

Authorised Documentation RepresentativeS. Reiser

Alfred Kärcher GmbH Co. KGAlfred-Kärcher-Str. 28 - 4071364 Winnenden (Germany)Phone: +49 7195 14-0Fax: +49 7195 14-2212

Winnenden, 2012/06/01

EC Declaration of Conformity

Product: High-pressure cleanerType: 1.180-xxxRelevant EU Directives2006/42/EC (+2009/127/EC) 2004/108/EC2000/14/ECApplied harmonized standardsEN 55014–1: 2006 + A1: 2009EN 55014–2: 1997 + A2: 2008EN 60335–1EN 60335–2–79EN 61000–3–2: 2006 + A2: 2009EN 61000–3–3: 2008EN 62233: 2008Applied conformity evaluation method2000/14/EC: Appendix VSound power level dB(A)Measured: 87Guaranteed: 89

CEO Head of Approbation

12 English

Assembly

English 13

Notes

14 English

Spare Parts

English 15