open plan long and low bookcase - blu dot...1 | 844.425.8368 open plan long and low bookcase 8041 an...
TRANSCRIPT
Open Plan Long and Low BookcaseD E S I G N E D I N 2 0 1 9
A S S E M B LY N O T E S | R E V 0 1
N E E D A H A N D ?
Contact us at [email protected] or 844.425.8368 for assistance.
@ B L U D O T
We design all our pieces in our Minneapolis studio. Follow along on Instagram for some sneak peeks into the process.
1 | 8 4 4 . 4 2 5 . 8 3 6 8 O P E N P L A N L O N G A N D L O W B O O K C A S E
8041An�-�p Bracket
8042An�-�p Strap
Back Panel
2QTY
Front Corner Upright
2QTY
Pt. 8054
Pt. 8053
4
8
QTY
QTY
Pt. 4022
6QTY
Pt. 1690
Pt. 1693
Pt. 9016
6
1
QTY
QTY12
Parts & Hardware
Pt. 1217
4QTY
Pt. 1218
4QTY
Pt. 8041
QTY
Pt. 8042
2QTY4
Parts & Hardware
S E R V I C E @ B L U D O T. C O M | 2A S S E M B LY N O T E S
Rear Left Corner Upright
Front Center Upright
1
1
QTY
QTY
Rear Right Corner Upright
Rear Center Upright
Shelf Panel
Top Panel
1
1
2
1
QTY
QTY
QTY
QTY
Parts & Hardware
pin holes
pin holes
pin holes on both sides
Parts & Hardware
3 | 8 4 4 . 4 2 5 . 8 3 6 8 O P E N P L A N L O N G A N D L O W B O O K C A S E
PT. 1690 x 4 PT. 1693 x 2 PT. 9016 x 1
front corner upright
front corner upright front center
upright
Step 01AT TA C H S H E L F PA N E L S T O F R O N T U P R I G H T S .
Attach the shelf panels to the front uprights using the provided hardware as shown.
Note that front uprights do not have pin holes.
S E R V I C E @ B L U D O T. C O M | 4A S S E M B LY N O T E S
PT. 1693 x 2 PT. 9016 x 1
Step 02AT TA C H R E A R C E N T E R U P R I G H T.
Attach the rear center upright to the shelf panels using the provided hardware as shown.
5 | 8 4 4 . 4 2 5 . 8 3 6 8 O P E N P L A N L O N G A N D L O W B O O K C A S E
PT. 8053 x 8
Step 03AT TA C H B A C K PA N E L S T O R E A R C E N T E R U P R I G H T.
Place metal pins in the center rear upright and align with back panel pieces as shown.
S E R V I C E @ B L U D O T. C O M | 6A S S E M B LY N O T E S
PT. 1690 x 4 PT. 9016 x 1
Step 04AT TA C H R E M A I N I N G U P R I G H T S .
Attach the remaining rear corner uprights using the provided hardware as shown. Ensure that the back panel pins align with the uprights.
7 | 8 4 4 . 4 2 5 . 8 3 6 8 O P E N P L A N L O N G A N D L O W B O O K C A S E
PT. 4022 x 6
Step 05I N S TA L L A D J U S TA B L E G L I D E S .
Install adjustable glides to the bottom of the uprights as shown. Ensure that the uprights are level prior to using the product.
S E R V I C E @ B L U D O T. C O M | 8A S S E M B LY N O T E S
PT. 1690 x 4 PT. 1693 x 2 PT. 9016 x 1
Step 06AT TA C H T O P PA N E L .
Attach the top panel using the provided hardware as shown.
9 | 8 4 4 . 4 2 5 . 8 3 6 8 O P E N P L A N L O N G A N D L O W B O O K C A S E
PT. 1217 x 4
8041An�-�p Bracket
PT. 8041 x 2
Step 07AT TA C H A N T I -T I P B R A C K E T S T O B O O K C A S E .
Brackets must be installed to the back rail of the top panel. In order to prevent damage, it is recommended that 3/32” pilot holes be drilled prior to installation.
Note: Ensure that the depth of the pilot hole does not exceed 1/2”. A deeper pilot hole may be visible on the opposite side.
S E R V I C E @ B L U D O T. C O M | 1 0A S S E M B LY N O T E S
PT. 1218 x 4PT. 8054 x 4
8041An�-�p Bracket
PT. 8041 x 2
1” lower than top panel
OR
wall
wall
Step 08AT TA C H A N T I -T I P B R A C K E T S T O W A L L .
Wall anchors and fasteners are included for installation into drywall. Please consult your local hardware professional to determine the hardware best suited for your wall type.
If the mounting locations are positioned on a stud, the installation of wall anchors may be skipped. Instead, drill 7/64” pilot holes in the marked positions and install anti-tip bracket with provided hardware as shown.
If the mounting locations are not positioned on a stud, drill 15/64” holes into the marked locations and press wall anchors into the drilled holes and install anti-tip bracket with provided hardware as shown.
B L U D O T D E S I G N & M A N U F A C T U R I N G , I N C . D E S I G N E D I N M I N N E A P O L I S , M N
8042An�-�p Strap
PT. 8042 x 2
Additional Information
CLEAN
Clean with a slightly damp, soft cloth. To remove dirt and fingerprints, use quality cleaners formulated for wood furniture. Wipe completely dry with a soft cloth in the direction of the wood grain.
Step 09S E C U R E B O O K C A S E .
Install and tighten wall straps prior to using the product.