Open Hole Logging inYourEnvironment

2

Get “The Complete Package”For comprehensive logging capabilities in most any type of environment such as high-temperature/high-pressure (HPHT) wells, or whenconditions require deployment through drill pipe, Halliburton has the complete package.

• Operating in most logging conditions, the lighter, shorter LOGIQ® Suite tools improve performance efficiency withoutcompromising operational range.

• e rugged, reliable HEAT® Suite II sensors tackle the hostile environments of HPHT wells.• And the 2.35-inch OD of our UltraSlim Suite sensors can easily be deployed in drill pipe.

Each suite comprises a full line of advanced sensors that can be configured in any combination to meet your specific job requirements:

• Telemetry/Gamma Ray – e telemetry and gamma ray are incorporated in one tool which also has an accelerometer that allowsreal-time speed correction for any logging combination

• Array Induction Resistivity – Array resistivity data is used to produce more accurate measurements of true formation resistivityRt, invasion and resistivity of the flushed zone (Rxo) without the need for correction or inversion charts. e soware focusingfilters allow logs to be produced with enhanced vertical resolution with choices of 4 , 2 or 1 .

• Compensated Litho-Density – Two key measurements – formation bulk density (Pb) and borehole-compensated photoelectricfactor (Pe) – are key factors in determining formation porosity and lithology. e lithodensity tool sensors for all our stacks arepad-mounted for better contact with the formation.

• Compensated Neutron – e compensated neutron log is primarily used to identify porous formations and estimate porosity,and it makes it possible to distinguish gas zones by comparison with other porosity logs or core analysis.

• Acoustics - Acoustic logging can be done with two different tools: the LOGIQ Borehole Compensated Sonic Array Tool (B-SAT) and theWaveSonic® tool. Both tools measure the arrival of compressional and shear waves. e LOGIQ Borehole Compensated Sonic Array Tool(two transmitters and five receivers) can also be used for cement bond logs. e monopole/dipole WaveSonic tool is also used to

measure mechanical stress fields on the formation. It has 32receivers and provides 96 waveforms for complete analysis ofthe acoustic properties for the formation.

Complete FlexibilityExtreme environments make extreme demands. Rigorouslytested to ensure operational reliability, Halliburton’s sensorsuites offer both real-time and memory logging capabilities,with complete conveyance flexibility.

• Combination of Sensors – Maximum open holefunctionality

• Environment – Hot hole, high pressure, through drill pipe

• Conveyance Method – rough drill pipe, wireline,slick line and coiled tubing

Wireline and Perforating

3.62

5”ac

tual

wid

th o

f LO

GIQ

®Su

ite

3.12

5”ac

tual

wid

th o

f Hea

t®Su

ite II

2.35

”ac

tual

wid

th o

f Ultr

aSlim

Sui

te

LOGIQ®. HEAT™ Suite. UltraSlim. Halliburton Wireline andPerforating’s focus on product development in recent years hasproduced a full line of advanced sensor suites craed andrefined with customer input for open hole logging in most anytype of environment.

HAL 6673

Tight Spot: UltraSlim SuiteHalliburton’s UltraSlim offering provides the accuracy of wireline formation evaluation in horizontal or high-angle wells, thus maximizingreservoir connectivity. Designed to be deployed through drill pipe, this suite acquires data in real time when run on wireline, and stores data inmemory when run on slickline, coiled tubing or on the end of drill pipe, providing the same accurate, reliable open hole data with any conveyance.

3

Our Flagship: LOGIQ® Suite Halliburton’s LOGIQ® logging system offersmarked improvement in operational efficiency.e basic quad stack tool suite is about half the length and two-thirds the weight of theprevious generation tool string. e upgradedfunctionality and expanded telemetrybandwidth also allows easy combination withour other high-end logging capabilities such asour advanced imaging technology.

Lighter weight and short length provide safer,easier handling on the rig, with significant timesavings through faster rig-up and rig-downtimes, and less rat-hole drilling required.

What’s more, the LOGIQ openhole systemdelivers high data rates and shorter tool stringlength without any penalties in temperature or

LOGIQ® OD Max. Temp. Max.Pressure Length Weight Max. Logging

Speed

Telemetry / GR 3.625 in.

350°F 20,000 psi

8.99 ft 185 lbs

60 fpm

Array Induction 3.625 in. 19.5 ft 308 lbs

Neutron 3.625 in. 10.54 ft 196 lbs

Spectral Density 4.88 in. 20.48 ft 500 lbs

SonicBoreholeCompensated

3.625 in. 15.83 ft 318 lbs

WaveSonic® 3.625 in. 34 ft 520 lbs

UltraSlim OD Max. Temp. Max.Pressure Length Weight Max. Logging

Speed as a StackTelemetry / GR

2.35 in. 300°F 14,000 psi

9.63 ft 90 lbs

60 fpm

Array Induction 18 ft 135 lbs

Neutron SpectralDensity

20.05 ft 235 lbs

BoreholeCompensated Sonic

15.54 ft 200 lbs

Battery Inverter 11 ft 100 lbsHAL 1311

pressure rating specifications; the LOGIQ system’s downhole tools are fully qualified forcontinuous operation at 350°F and 20,000 psi, providing operational flexibility over the fullrange of typical operating environments.

HAL 11171

Hostile Conditions: HEAT® Suite IIFor extreme drilling environments, our HPHTHEAT Suite II logging service provides reliablelog data in temperatures up to 500°F andpressures as high as 30,000 psi.

is rugged sensor combination provides the data you need for accurate lithologyidentification, reserves calculations, fractureidentification, and other critical determinationsin hostile well environments, which, in turn,streamlines subsequent wireline logging runs,resulting in significant cost reduction and rigtime savings.

Designed and built specifically for the challengesof hostile environments, HEAT® Suite II sensorcombinations have performed flawlessly intemperatures up to 500°F (260°C).

HA

L 845

HEAT Suite II OD Max. Temp. Max.Pressure Length Weight Max. Logging

Speed as a Stack

Telemetry / GR 3.125 in.

500°F 30,000 psi

14 ft 250 lbs

60 fpmArray Induction 3.125 in. 29.3 ft 464 lbs

Neutron SpectralDensity

4.0 in. 26.1 ft 560 lbs

WaveSonic® 3.125 in. 41.1 ft 720 lbs

© 2009 Halliburton. All rights reserved. Sales of Halliburton products and services will be in accord solely with theterms and conditions contained in the contract between Halliburton and the customer that is applicable to the sale.

H07244 10/09

The Complete Halliburton PackageAs one the largest oilfield service companies in the world, Halliburton is committed to providingservices of the highest quality and best value. at’s why we custom-tailor solutions around yourneeds. In well aer well, this collaborative approach has proven to save money, reduce risk and cutnonproductive time (NPT).

We’ll work with you to customize optimal solutions to your reservoir-specific issues, and ensureoperational and service excellence. As a result, you can count on us for reliable, comprehensivelogging services – in your environment.

Evaluate Reservoir – Deliver Well

www.halliburton.com