online product training...
TRANSCRIPT
Online Product Training Presentation
Jimny History (1970 – 2018)Three generations of iconic lightweight four-wheel-drive
performance.
3 generations, nearly 50 years young1st Generation (1970 - 1981)The first-generation was compact 4WD three-seater developed for professional use. Being the only mini car in the off-road vehicle segment at the time of its release, it stood out from mainstream 4WD vehicles, which were large and high-displacement as a rule.
LJ10 (1970) – 359cc, two-stroke, 2-cylinder, air-cooled engine (18kW)
LJ20 (1972) – 359cc, two-stroke, 2-cylinder, water-cooled engine (21kW)
LJ50 (1975) – 539cc, two-stroke, 3-cylinder engine (24kW)
LJ80 (1977) – 797cc, four-stroke, 4 cylinder engine (31kW)
3 generations, nearly 50 years young2nd Generation (1981 - 1998)The second-generation was strategically developed to challenge the global market. It was well received by both genders and its sharp, stylish design suited both urban and off-road settings.
SJ410 (1981) – 970cc, 4-cylinder (34kW)
SJ413 / Samurai (1984) – 1324cc, 4-cylinder engine (47kW), 5-speed
Samurai (1995) – 1298cc, 4-cylinder (56-63kW), Coilspring suspension
3 generations, nearly 50 years young3rd Generation (1998 - 2018)The third-generation introduced a higher level of comfort with its smooth aerodynamic body, longer wheelbase and refined rigid suspension. Offering greater stability and manoeuvrability on and off-road, it remained popular worldwide for 20 years.
Jimny 1.3 VVT (2008) – 1328cc, 4-cylinder (62.5kW)
4th Generation -2018 and beyond
Development concept
Jimny enthusiasts
Enjoy off-roading in the Jimny
General usersMainly on-road usage
Use Jimny’s performanceto the fullest
Professional users
Professional usersThey use the Jimny for work and use its off-road performance to the fullest
Jimny enthusiastsThey drive the Jimny off-road for leisure and often use it for outdoor activities
General usersThey mainly drive in the cities and on-road, but admire “authentic” tools used by professionals.
The ONE and ONLY
Product outline
Key focus points⋆ Practical exterior⋆ Functional interior⋆ Off-road performance⋆ Professional tools
Exterior design⋆ Square-shaped body for better situational awareness
⋆ Strong body built for rough terrain
⋆ Elements of uncompromised off-road capability and utility
shaped body for better situational awareness
road capability and utility
Exterior design⋆ More upright A-pillars and flat clamshell bonnet enhance visibility
⋆ Simple design express the robustness of thick solid metal
Exterior designUpright windshield and longer roof help the driver avoid direct sunlight.
Exterior designDipped front window lines improves visibility from the side windows.Dipped front window lines improves visibility from the side windows.
Exterior designFlat roof and bonnet hood for easier snow removal.Flat roof and bonnet hood for easier snow removal.
Vertical side and quarter windows help prevent snow from piling up.
Exterior designMoulded black bumpers, wheel arch extensions and side sills help block rocks and stones from scratching the body panels. scratching the body panels.
Exterior designAngled bumper optimised for off-road use.
Square-shaped wheel arches compliment the robust, square shaped exterior.
Exterior design
Halogen headlamps LED headlamps Headlamp washers
WheelsThe steel wheels are painted black metallic, while the alloy wheels are painted dark-metallic grey to highlight the robust body design.
15-inch alloy wheel15-inch steel wheel
Spare wheel mounted on rear door
Body colours■Two-tone colours
Kinetic Yellow + Bluish Black Pearl 3 (DG5)
Brisk Blue Metallic + Bluish Black Pearl 3 (CZW)
Chiffon Ivory Metallic + Bluish Black Pearl 3 (2BW)
Silky Silver Metallic (Z2S)
■Single-tone colours
Jungle Green (ZZC) Bluish Black Pearl 3 (ZJ3) Medium Gray (ZVL) White (26U)
■ Colours with a purposeThe two new colours body colours are designed to stand out or provide camouflage.
Kinetic Yellow – High Visibility colourInspired by safety jackets, the colour is designed to clearly stand out in bad weather conditions and rough worksites, making it ideal for rescue teams and adventurers who need to be eye-catching while travelling through harsh environments.
Jungle Green – Low Visibility colourThis colour blends in with natural scenery like deep forests to conceal nature conservationists and park rangers protecting forests, or adventures camping in the wild.
Body colours
Dimensions
2,250mm(±0)
3,625mm(-50mm)
1,720mm(+15mm)
CurrentNew
Dimensions
1,395mm(+40mm)
1,645mm(+45mm)
1,405mm(+40mm)
Turning radius
Interior dimensionsCurrentNew
-40mm(645mm) ±0mm
(490mm) +30mm(915mm) +40mm
(730mm)-5mm
(755mm)
Interior designBlack interior with accentuating coloursThe black interior is without excessive colours or decorations to minimise distraction and lets the driver concentrate on maneuvering the vehicle on and off-road.
Interior designBlack interior with accentuating coloursMetallic colours are used on functional parts to stand out in the black interior. In higher grades, side and centrelouvres are silver finished for a metallic appearance.
Interior design
Interior designRugged, practical door panelsThe door panels are also designed to be functional and robust. Resin door trims are minimised and the steel door panels are revealed to complement the tough design.
The dipped window lines increase visibility and the door grips are designed to provide solid support. The horizontally aligned armrests give a strong, rugged impression.
Interior designThe instrument panel is segmented into a three-tier configuration consisting of upper, middle and lower layers.
Interior design
The meters are set in cubic housings and are always lit up for clear viewing on and off-road, especially when the vehicle passes between sunlit and shaded areas.
■Hairline finished meter cluster garnishThe meter cluster garnish is made of a smooth, unpainted piano-black bio-polycarbonate material. Its hairline finish offers the same high-quality metallic texture as a painted finish.
■Meter cluster
Audio system
SLDA features a 7-inch touch-screen display for intuitive operation. Located on the circumference of the panel for convenience are touch buttons for power, volume, “home”, voice-command and settings.
Smartphone Linkage Display Audio (SLDA)
Audio system
Apple CarPlay, Android Auto™ and MirrorLink™ allow the use of various smartphone applications.
Smartphone integration
Audio system
Android Auto is not officially available in South Africa yet. However, there is a suitable work-around solution as explained in the Cars.co.za article “How to get Andoid Auto in SA” :https://www.cars.co.za/motoring_news/how-to-get-android-auto-in-sa/44038/
*Android Auto
Audio system
An infrared touch-screen is used for the display to enable easy operation even while wearing gloves. This is especially convenient for customers in cold regions and professionals who wear gloves at work sites.
Infrared touch-screen
Audio features●Radio (AM/FM)●USB port, SD card slot
(MP3, WMA, AAC compatible)●Bluetooth® (hands-free, audio streaming)
Movie features●USB port, SD card slot
(AVI, MPEG4 compatible)
Interior designScratch/stain-resistant grains
Pattern resembling that of a high-class single –lens reflex camera that conceals small scratches and suppresses reflections.
Interior design
Unlike the D-shaped steering wheels in sports-type models, the steering wheel in the Jimny is circular to maintain ease of handling in rough, off-road terrain.
Steering wheel
It can also be vertically adjusted up to 35mm.
35mm
CONFIDENTIAL INTERNAL USE ONLYCONFIDENTIAL SUZUKI MOTOR CORPORATIONMTMTAT
A large, easy to grip handle provides solid support for the front passenger when entering or exiting the vehicle.
The front seat area is specially designed for professional use.
USB socketAccessory
socket
90mm
500ml
Interior design
Switches, dials and other controls are designed for easy operation even when the driver is wearing gloves and while traveling over rough roads.
Intuitively designed controls
Comfort
The 55mm taller front seatbacks and wider cushion frames contribute to better shock absorption. The seat bolsters provide firmer support at the hips, while the shoulder area is intentionally flat to allow free movement of the driver’s body when the vehicle tilts in uneven terrain. The seats are narrower at the shoulders so the driver can look back with ease. The sliding range of the front seats is 240mm.
Front seat comfortto better shock
absorption. The seat bolsters provide firmer support at the hips, while the shoulder area is intentionally flat to allow free movement of the driver’s body when the vehicle tilts in uneven terrain. The seats are narrower at the shoulders so the driver can look back with
240mm
Luggage spaceVertical pillars help increase load volume.
The rear lamps are all gathered on the bumper to make room for a wider rear door opening.
Luggage space
850mm
755mm
1,030mm
1,015mm
Luggage space
Luggage space
Five utility screw holes are available on both sides of the luggage space under each quarter window.
Utility screw holes
CONFIDENTIAL INTERNAL USE ONLYCONFIDENTIAL INTERNAL USE ONLY
Luggage space
Luggage hooks can be installed on any of the four luggage hook screw holes to enable easy, solid securing of large items.
Luggage hook screw holes
CONFIDENTIAL INTERNAL USE ONLY
Luggage space
CONFIDENTIAL INTERNAL USE ONLY
Accessory socket*A power socket provides easily accessible power in the back.
Luggage box*A removable luggage box* can store small or dirty items to keep floor clean and organised.
ToolboxA polypropylene toolbox holds the jack and wrench for easy removal in emergency situations.
*Available for GLX models only.
Off-road performance
Three anglesThree angles Ladder frameLadder frame
3-3 link rigid axle 3-link rigid axle link rigid axle link rigid axle suspension with33 link rigid axle link rigid axle link rigid axle suspension withsuspension withsuspension withsuspension withsuspension with
coil springssuspension with
coil springscoil springs
4WD with low range 4WD with low range transfer gear
4WD with low range transfer geartransfer gear
37° 28° 49°
35° 27° 46°
Off-road performance
Off-road performance
Ground clearance has been increased to 210mm (+20mm) to provide enough height to tackle even the toughest terrain.
Ground clearance
210mm (+20mm)
Off-road performance
Two cross members near the centre of the ladder frame form an X-shaped reinforcement that increase torsional rigidity.
Ladder frame - New “X-member” and two additional cross members
X-member
Additional cross member
Off-road performanceTorsional rigidity
Force inputForce input
1.5 times higher1.5 times higher
Force input
1.5 times higher1.5 times higher
Off-road performanceBody mounts
The eight rubber body mounts positioned between the ladder frame and upper body have been redesigned to enhance ride comfort and driving stability.
Off-road performanceBody mounts
road performance
Off-road performance
The new Jimny can be switched between 2H (2WD-high gear), 4H (4WD-high gear) and 4L (4WD-low gear) modes by a shift lever directly connected to the transfer gear.
Lever type direct 4wd shifting action
Off-road performance
2H mode: Offers smoother, more efficient driving in the city and on highways.4H mode: Enables sure driving off-road and in the snow.4L mode : Show the Jimny’s true potential when travelling over rough rocks, mud and unbeaten tracks.
Lever type direct 4wd shifting action
Off-road performanceOff-road performance3-link rigid axle suspension with coil springs
Stabilizer Increased diameter
Stabilizer Increased diameterIncreased diameterIncreased diameterIncreased diameterIncreased diameterIncreased diameter
Material has been changedMaterial has been changed(Stronger, more robust high
Material has been changedMaterial has been changed(Stronger, more robust high(Stronger, more robust high(Stronger, more robust high(Stronger, more robust high(Stronger, more robust high-
Material has been changedMaterial has been changed(Stronger, more robust high(Stronger, more robust high(Stronger, more robust high(Stronger, more robust high(Stronger, more robust high tensile steel)
Material has been changedMaterial has been changedMaterial has been changedMaterial has been changedMaterial has been changedMaterial has been changed(Stronger, more robust high(Stronger, more robust high(Stronger, more robust high(Stronger, more robust high(Stronger, more robust high-tensile steel)tensile steel)tensile steel)tensile steel)tensile steel)tensile steel)tensile steel)tensile steel)tensile steel)tensile steel)tensile steel)tensile steel)tensile steel)(Stronger, more robust high
Axle housing
Front
Off-road performance
Steering damperA steering damper has been added to suppress kickback and vibration for greater steering comfort on rough terrain.
Axle housing
30% more Axle housing
30% more 30% more 30% more flexural Axle housingAxle housing
30% more 30% more 30% more flexural flexural flexural flexural flexural flexural flexural strength
30% more 30% more flexural flexural strengthstrengthstrengthstrengthstrength
Rear
Off-road performance
Hill hold control
Off-road performance
A hill hold function makes hill starts easier by preventing the car from rolling backward for two seconds while the driver moves his/her foot from the brake pedal to the accelerator pedal. This function prevents rearward rolling even on bumpy slopes that vary on the right and left sides, so drivers can focus on accelerator work and deliver optimum torque to the ground for effective climbing.
Hill descent control
Off-road performance
When travelling downhill in 4WD mode, hill descent control can be activated to automatically apply the brakes and maintain a speed of 10km/h in 4H mode or 5km/h in 4L mode. It allows the driver to control vehicle speed with the accelerator pedal only, without using the brake or clutch pedal, and fully concentrate on steering. The system activates when travelling under approx. 25km/h with the hill descent control switch ON.
No traction
Wheel slips ! Brake applied
Gain traction
Without brake LSD With brake LSD
New Jimny(K15B)
Current Jimny(M13A)
Number of cylinders 4 4Displacement (cm3) 1,462 1,328Compression ratio 10.0 9.5Maximum output (kW/rpm) 75/6,000 62,5/6,000Maximum torque (N・m/rpm) 130/4,000 118/4,000Fuel consumption (l/100km) 6,3 (MT) / 6,8 (AT) 7,2 (MT) / 7,8 (AT)
Engine performanceConcept
- Lightweight- Compact- Fuel efficient with better performance
-15%Engine weight
Engine performanceLightweight compact design
Engine (K15B)
A lightweight resin belt cover has been added to protect the belts from pebbles for higher reliability on rough roads.
Resin belt cover
The fuel tank has been changed to resin, instead of the current sheet metal, for a significant reduction in weight and greater resistance rust.
Resin fuel tank
40% lighter40% lighter
Engine performanceEnhanced components
The refined 4-speed automatic transmission reduces friction and enhances fuel efficiency. The shift pattern has been changed from the current gate type to the straight aligned type for simple operation.
■4AT■5MTThe transmission system has optimised gear ratios for the new K15B engine and also offers better fuel efficiency.
Transmission
Transmission■5MT Direct shift feelIn the current Jimny, the selector system is entirely mounted on the transmission housing and directly picks up its vibration. The new Jimny’s selector system is mounted partially on the transmission housing and partially on the ladder frame to reduce direct vibration from the transmission. The mount structure has also been redesigned to reduce vibration and enhance the shift feeling when changing gears.
■Metal grille and cowling structureInstead of the usual resin, much sturdier steel is used on the front grille and cowling to increase body strength. Their bolt-on design make them easy to remove for repairs.
Body construction
Body structureBody construction■Anti-rust bodyThe body of the Jimny is now even more resistant to rust, thanks to more extensive use of zinc-coated steel, a more effective floor undercoating and the application of sealer coatings at panel edges.
1,075mm - 70°
895mm - 51°
590mm - 31°
■Front door openingThe front doors open in three stages on the new Jimny for easier entering and exiting. Door parts are optimally arranged to reduce operation load when opening and closing the door.
Body construction
■Drip railThe drip rail running along the side and rear edges of the roof provides edges for flexible installation of roof carriers. Together with the new Jimny’s square body, the rail shows efficient use of the wider roof area.
Body construction
■Drip railIt also helps prevent water from dripping on passengers as they enter and exit the Jimny.
Body construction
Body construction■Improved NVH performance•Reducing driver stress and fatigue was one of the major development goals. To reduce vibration, ladder frame rigidity has been increased and body mounts have been redesigned.Careful placement of sound absorbing material throughout the body also helps to reduce unpleasant noise inside the cabin.
Ladder frame with increased rigidity
Enlarged and optimised rubber body mountsOptimised shift lever mount
Body construction■Anti-vibration measures
Quarter trim silencer for rear seat Anti-noise weather strip
Instrument panel silencer
Sealed fender cover
Felt integrated carpet for reduced road/transmission noise
Anti
Body construction■Noise reduction measures
Rain/wind noise-absorbing roof materials
The bonnet and its surrounding parts absorb impact to mitigate head and leg injuries in the event of a collision with a pedestrian.
1. Impact-absorbing wipers
2. Impact-absorbing cowl top
3. Impact-absorbing bonnet hinges
4. Impact-absorbing fender
5. Impact-absorbing bonnet
6. Impact-absorbing front bumper
12
5
6
3
3
4
4
Safety■Pedestrian injury mitigating body
■Total Effective Control Technology (TECT)The new Jimny’s body design centres on Suzuki’s TECT concept, resulting in a structure that efficiently absorbs and disperses energy in the event of a collision.
Safety featuresSafety
■ESP®
If Electronic Stability Programme (ESP®)* detects wheel slippage, it automatically adjusts the engine torque and brakes to suppress wheel slippage and help the driver stay in directional control.
*ESP® is registered trademark of Daimler AG. Please refer to the equipment list for availability.
Safety
The new Jimny is equipped with ABS (Anti-lock braking system) and BAS (Brake assist system). The ABS detects whether one or more wheels are at risk of locking under braking and modulates brake pressure to the appropriate wheels. BAS assists the driver by increasing the brake pressure to a level that will ensure minimal stopping distance.
■ABS brakes with BAS
■Additional safety features
- ISOFIX child seat anchorages- High mount stop lamp- Pedal release system- Side impact door beams
Safety
The new Jimny is equipped with dual front airbags that protect the driver and front passenger in a frontal collision.Front seatbelt pre-tensioners with load limiters are equipped to reduce the risk of serious injury.
■SRS – Dual front airbags
Model line-up
GA features:- Aircon, power steering and immobiliser- ABS and BAS- SRS Dual front airbags- ESP- AllGrip Pro 4WD with low range transfer
gear- Brake LSD traction control- Hill hold control- Hill descent control- 15” steel wheels- Double-din radio preparation (2 speaker +
antenna)
Model line-up■Jimny 1.5 GA MT
Model line-upGLX features:- Colour coded door handles and painted
exterior mirrors- Electric windows and mirrors- Automatic climate control- 15” alloy wheels- Remote keyless entry with central locking- LED projector headlights- Front fog lights- SLDA – 7” Infra-red touchscreen,
Smartphone Linkage Display Audio- Leather steering wheel with audio and
cruise controls- Cruise control- Luggage 12V accessory socket- 50:50 split rear seats- Luggage area box
Model line-up■Jimny 1.5 GLX MT / AT
Model line-upPricing
Jimny 1.5 GA 5MT - R264 900
■Jimny GA and GLX models
Jimny 1.5 GLX 5MT – R299 900Jimny 1.5 GLX 4AT – R319 900
Model line-upWarranty and service plan
GA models:5 year / 200 000km promotional warranty2 year / 30 000km service plan
■Jimny GA and GLX models
GLX models:5 year / 200 000km promotional warranty4 year / 60 000km service plan