onelandigitalsignage lg webos4setupguide · 4 setupguidev1.004/12/2018 1 installation...
TRANSCRIPT
V1.0 39089
Copyright © 2016ONELAN Ltd. All rightsreserved.
ONELAN Digital Signage
LG WebOS4 Setup Guide
ONELAN Digital Signage
LG WebOS4 Setup Guide
All rights reserved. No parts of thisworkmaybe reproduced in any form or byanymeans - graphic,electronic, or mechanical, including photocopying, recording, taping, or information storage andretrieval systems - without the written permission of the publisher.
Products that are referred to in this document maybe either trademarksand/or registered trademarksof the respective owners. The publisher and the author make no claim to these trademarks.
While every precaution hasbeen taken in the preparation of this document, the publisher and theauthor assume no responsibility for errors or omissions, or for damages resulting from the use ofinformation contained in this document or from the use of programsand source code that mayaccompany it. In no event shall the publisher and the author be liable for any lossof profit or anyothercommercial damage caused or alleged to have been caused directly or indirectly by this document.
Printed: 04 December 2018
Copyright © 2018. All rights reserved.
SetupGuide 3
This document is designed to act asa SetupGuide for LGWebOSplayers.
1 Installation 4
1.1 Setup 4
1.2 Installing Configurations 5
1.3 Creating Configurations 7
1.4 Editing or Deleting Con-figurations 9
2 Supported Formats 11
2.1 Audio 11
2.2 Video 11
2.3 Image 12
2.4 Flash 12
3 Known Limitations 14
Contents
4 SetupGuide V 1.0 04/12/2018
1 Installation
Plug the screen in and power on.
A keyboard can be plugged into the screen to assist with setup.
1.1 Setup1. Using the remote, select your Language,Continent,Country and, if applicable, Time Zone.
Then pressOK.
2. Set theRotation to the appropriate orientation you wish your screen to display.
3. Select aNetwork setting, eitherWired if you are using an ethernet cable orWifi. If the latter,enter the network password.
4. For theOn/Off Timer, ONELAN recommends that you set this to alwayson asotherwise playersmayunexpectedly turn off despite instructions from themanaging CMS.
5. You will now be taken to a screen with no signal. Press theSettings button on the remote or thegear icon (show below). SelectSI Sever Setting.
6. A Server menu will now appear. ChangeApplication Launch Mode to Remote and FullyQualified Domain Name toOn.
7. Now enter your CMSURL into the URL text boxusing the following format:
http://icc*****.domain.com/soc
or
http://<IPaddress>/soc
Note: Ensure that you append '/soc' to the end of the URL.
SetupGuide V1.0 04/12/2018 5
8. Now press the backbutton in the top right of that menu and reboot the player.
9. The player will now connect to the CMSand install the Install Code Page. Thismay take a fewminutesand the player may reboot.
10. Now type the install code into the relevant field.
Note: This can alternatively be done remotely. See installing configurations.
1.2 Installing Configurations
1. On your CMSclick theManage Players icon or navigateHome > Manage Players.
2. Select the player from the list.
3. Click theActions tab.
6 SetupGuide V 1.0 04/12/2018
4. Click on the plug icon.
5. Select the preferred configuration from the drop downmenu.
Note: During initial setup, when a SoC player displays the install code page you can use thereinstall feature on the CMS to install the player. This allows for a remote install rather than typingan install code into each player.
6. Click the tick button and the new configuration will install.
SetupGuide V1.0 04/12/2018 7
1.3 Creating Configurations
1. Click theManage Players icon in the top right hand corner of the CMS. You can also reachthis page bynavigatingHome > Manage Players.
2. Click theSettings icon on the left hand side.
3. Click theAdd Configuration button.
4. Type the name of the configuration and from the drop downmenusselect the appropriatechannel, screen orientation and license you want your configuration associated with. If you wish torestrict the channel download to specific times then clickRestricted Times and enter theappropriate values.
This feature allowsyou to add and edit configurations. Therefore, you can install screenswith pre-setorientationsand channels.
8 SetupGuide V 1.0 04/12/2018
SetupGuide V1.0 04/12/2018 9
1.4 Editing or Deleting Configurations
1. Click theManage Players icon in the top right hand corner of the CMSor navigateHome> Manage Players.
2. Click theSettings icon on the left hand side.
3. Hover over a configuration in the list. It will turn blue and two iconswill appear to the right.
4. To edit:
1. Click theEdit icon and a pop up will appear showing you the Installation code.
2. You can rename the configuration, select a different channel or change the screen
10 SetupGuide V 1.0 04/12/2018
orientation or associated license.
5. To delete:
1. Click theDelete icon.
2. Thiswill open a pop up asking if you are sure. SelectYes.
SetupGuide V1.0 04/12/2018 11
2 Supported Formats
This section lists all the streaming protocols andmedia file formats supported onWebOS Signage 3.0.
2.1 Audio
FileExtension
Media Con-tainer Codec Note
.mp3MP3
MPEG-1, MPEG-2,Layer 2, Layer 3
l Bit rate: 32 - 320 Kbps
l Sample fequency: 16 - 48KHz
.wav WAV PCM -
.ogg OGG Vorbis -
.wma WMA WMA -
2.2 VideoNote: Themaximum supported video resolution is FullHigh Definition (FHD 1920x1080).
FileExtension Codec
.asf, .wmv
Video VC-1 advanced profile (WVMA excluded), VC-1simple andmain profiles
Audio WMA Standard (WMA v1/WMA speech excluded),WMA 9 professional
.divx .avi
Video DivX3.11, DivX4, DivX5, DivX6, XVID (expect 3warp-point GMC), H.264/AVC, Motion Jpeg,
MPEG-4
Audio MPEG-1, Layer I, II, MPEG-1 Layer III (MP3),Dolby Digital, Dolby Digital Plus, LPCM, ADPCM,
DTS
.mp4, .m4v,.mov
Video H.264/AVC, MPEG-4
Audio AAC, MPEG-1 Layer III (MP3)
12 SetupGuide V 1.0 04/12/2018
FileExtension Codec
.3gp, .3g2Video H.264/AVC, MPEG-4
Audio AAC, AMP-NB, AMR-WB
.mkvVideo MPEG-2, MPEG-4, H.264/AVC, VP8
Audio Dolby Digital, PCM, DTS, MPEG-1 Layer I, II,MPEG-1 Layer III (MP3), Vorbis, AAC
.ts, .trp, .tp,.mts
Video H.264/AVC, MPEG-2
Audio MPEG-1 Layer I, II, MPEG-1 Layer III
.mpg,.mpeg, .dat
Video MPEG-1, MPEG-2
Audio MPEG-1, Layer I, II, MPEG-1 Layer III (MP3)
.vobVideo MPEG-1, MPEG-2
Audio Dolby Digital, MPEG-1 Layer I, II, DCE-LPCM
.webmVideo VP8, VP9
Audio Vorbis, Opus
Note: Use an audio file with a play time longer than one second. Playing a shorter audio file maynot work properly on the platform.
2.3 Image
File Extension File Format.jpeg, .jpg, .jpe JPEG
.png PNG
.bmp BMP
2.4 FlashNote: On webOS signage 2.0, FLV and F4V file typesare playable only byusing the <video>element.
Flash PlayerVersion Flash Player v11.1
Action Script Actionscript v2.0, Actionscriptv3.0
SetupGuide V1.0 04/12/2018 13
GraphicResolution 1920 x 1020 (FHD)
Runtime-load Image Type PNG, JPEG
SoundFormat AAC, MP3
Sample Rate 16 KHz, 32 KHz, 44.1 KHz
Flash Video
HW Codec H.264 (with AAC audio only)
Recommended VideoResolution
Up to FHD (1080p)
Recommended AudioSample Rate
44.1 KHz
Streaming Protocol HTTP(s) RTMP/RTMP-e
SetupGuide V1.0 04/12/2018 14
3 Known Limitations
l NTB level gapless playback - this is a known limitation with LG WebOSplayers. The gaplessplaybackwill not be to the same level as the NTBand requires the configuration detailed in thisdocument to bemet. If the player cannot play one of the videos then the player will fall back toplaying the videosnon-gapless.
l Movies/images - usemedia of a similar size to the zone asotherwise scalingmaycause lossofquality.
l GIFs - avoid usingmultiple animatedGIFsas these can cause playback issues.
l Portrait Video Content - WebOS2 hasa delayof 2 secondsbefore it will correctly set theportrait video content. To avoid this delay, play pre-rotated content in landscapemode.
l SoC players do not yet supportShow part of Movie option for theMovie Size property.
l "Letterbox" mode is the only supported renderingmode for videoswithin gaplessplayback.
l LG cannot play audio and video soundtracksat the same time. Usersmust set volume to o on otheritemsasappropriate.
l External storage - Kingston DataTraveler USBsare not recommended for use with externalstorage as thismay lead to connectivity issues.
15 SetupGuide
Bryants Farm, Kiln Road,DunsdenGreen, Reading RG4 9PB, UK
T: +44 (0)1491 411 400--F: +44 (0)1491 579 254
E: [email protected] www.onelan.com