on board cooling (fda validated – ice slurry method) delivered at ≤55 o f with harvester’s...

11
On Board Cooling (FDA Validated – Ice Slurry Method) • Delivered at ≤55 o F with harvester’s time/temperature log and in processor’s refrigeration cooler no later than 3pm • Dealer accepts if product is ≤55 o F At delivery if >55 o F either reject or retag “For shucking only by a certified dealer” or “For post harvest processing

Upload: tracy-alexander

Post on 31-Dec-2015

213 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: On Board Cooling (FDA Validated – Ice Slurry Method) Delivered at ≤55 o F with harvester’s time/temperature log and in processor’s refrigeration cooler

On Board Cooling(FDA Validated – Ice Slurry Method)

• Delivered at ≤55oF with harvester’s time/temperature log and in processor’s refrigeration cooler no later than 3pm

• Dealer accepts if product is ≤55oF • At delivery if >55oF either reject or retag “For

shucking only by a certified dealer” or “For post harvest processing only”

Page 2: On Board Cooling (FDA Validated – Ice Slurry Method) Delivered at ≤55 o F with harvester’s time/temperature log and in processor’s refrigeration cooler

On Board Cooling(FDA Validated – Ice Slurry Method)

• Product must be placed in ice slurry within 1 hour of harvest time.

• In ice slurry for no longer than 20 minutes. Check temperature in middle of bag (out of ice slurry) and write down time it reached ≤55oF. If using smaller bag should be within 10-20 mins.

• Place bag in insulated ice box and packed at least 3 inches of ice surrounding the bag to maintain ≤55oF.

Page 3: On Board Cooling (FDA Validated – Ice Slurry Method) Delivered at ≤55 o F with harvester’s time/temperature log and in processor’s refrigeration cooler

On Board Cooling(FDA Validated – Ice Slurry Method)

Items Required:– ICE – Must be from an approved/potable

water source and properly protected from contamination.–Water in Ice Slurry - Can be from a potable

water source or harvesting area water in the open status

Page 4: On Board Cooling (FDA Validated – Ice Slurry Method) Delivered at ≤55 o F with harvester’s time/temperature log and in processor’s refrigeration cooler

Items required:– Insulated container to hold ice slurry – example

large cooler

Page 5: On Board Cooling (FDA Validated – Ice Slurry Method) Delivered at ≤55 o F with harvester’s time/temperature log and in processor’s refrigeration cooler

Items required:– Insulated container to store cooled bags and ice –

insulated totes, shrimp tote from processor?

Page 6: On Board Cooling (FDA Validated – Ice Slurry Method) Delivered at ≤55 o F with harvester’s time/temperature log and in processor’s refrigeration cooler

Items required:- 3 inches of ice surrounding the bag to hold oysters

at ≤55oF. - Ice must be from an approved/potable water

source

Page 7: On Board Cooling (FDA Validated – Ice Slurry Method) Delivered at ≤55 o F with harvester’s time/temperature log and in processor’s refrigeration cooler

Items required:– Calibrated thermometer with probe to take

temperature of shellstock.– Temperature should be taken in the middle of

oyster bag or bucket.

Page 8: On Board Cooling (FDA Validated – Ice Slurry Method) Delivered at ≤55 o F with harvester’s time/temperature log and in processor’s refrigeration cooler

Items Required:

- Harvester Log time/temperature verification

Back of Tag Record:

(1) Time shellstock placed in ice slurry

(2) Record Time and Temperature of bag post slurry dip. Must be below 55oF and taken in the middle of the bag.

Page 9: On Board Cooling (FDA Validated – Ice Slurry Method) Delivered at ≤55 o F with harvester’s time/temperature log and in processor’s refrigeration cooler

Items Required:

- Harvester Log time/temperature verification

Back of Tag Record:

(1) Time shellstock placed in ice slurry

(2) Record Time and Temperature of bag post slurry dip. Must be below 55oF and taken in the middle of the bag.

Page 10: On Board Cooling (FDA Validated – Ice Slurry Method) Delivered at ≤55 o F with harvester’s time/temperature log and in processor’s refrigeration cooler

Delivery Requirements

• Delivered at ≤55oF with harvester’s time/temperature log and in processor’s refrigeration cooler no later than 3pm

• Dealer accepts if product is ≤55oF • At delivery if >55oF either reject or retag “For

shucking only by a certified dealer” or “For post harvest processing only”

Page 11: On Board Cooling (FDA Validated – Ice Slurry Method) Delivered at ≤55 o F with harvester’s time/temperature log and in processor’s refrigeration cooler

ContactsApalachicola Office

• Phone: (850) 653-8317• Joe Shields, Environmental Administrator

[email protected]• Nancy Horton, Inspector

[email protected]

Tallahassee Office• Phone: (850) 617-7600• Samantha Brabant

[email protected]• Kim Norgren, Environmental Administrator

[email protected]• Jillian Fleiger, Environmental Administrator

[email protected]