ome aplication guide 30 september 2015
TRANSCRIPT
-
8/19/2019 Ome Aplication Guide 30 September 2015
1/147
SEPTEMBER2 5
3030
INTERNATIONALAPPLICATION
CATALOGUE
NUMBER
-
8/19/2019 Ome Aplication Guide 30 September 2015
2/147
PAGE 2
-
8/19/2019 Ome Aplication Guide 30 September 2015
3/147
PAGE4
5
9
COMPACT AWD - OME SPRING & SHOCK ABSORBER RANGE ………………………………... 13
LTR REMOTE CANISTER SELECTION…...…...……………………………………………………… 14
ARMOURED APPLICATION….……………………………………….…………………………. 15
16
25
31
37
38
38
38
39
46
48
49
56
72
72
77
104
105
110
112
115
116
123
124
125
125
126
127
127
127
127
128
131
137
140
144
144
145
146
CONTENTS
GUIDE TO SELECTION ……………………….……………………………………………….…………
NITROCHARGER SPORT SELECTION ……..……….……….……………………………………….
NITROCHARGERS & STEERING STABILISER APPLICATIONS ……..……….……….…………
SUSPENSION APPLICATIONS
CHRYSLER JEEP ……………………………...…………………………………………………………
FORD ……………………………………………………………………………….…...…………………
HOLDEN / ISUZU / GM ………………………………………………………………………….….……
MITSUBISHI ………………………..………………………………………………….………………...…
KIA ……………………………………………………………………………….………..…………………
HUMMER …………………………………………………………….………….………………...………
HYUNDAI …………………………………………………………….………….………………...………
LADA ……………………….………………………………………………………….……………………
LAND ROVER ………..……………………………………………………….……….………………...…
MAZDA ……………………………………………………………………………..….………………...…
MERCEDES ………………………..………………………………………………….………………...…
NISSAN ………………………………………………………………………….…….………………...…
SSANGYONG ……………………………………………………….…..…………….………………...…
SUZUKI …………………………………………………………………………..…….………………...…
TECHNICAL SPECIFICATIONS
VOLKSWAGEN …………………………………………………………………….………….…………
TOYOTA …………………………………………………………………….………….………………...…
LEAF SPRING SERVICE PARTS ……………………………………………………….…………...…
U BOLTS …………………………………………………………………….…………..……………...…
DIAGRAM REFERENCE FOR SUSPENSION BUSH KITS …………………………………………
SUSPENSION BUSH KIT SELECTION …..……....……………………………………………………
NITROCHARGER SPORT SPECIFICATIONS …..………………………………………………….…
REPLACEMENT CENTRE BOLTS ……………………………………………………….…………...
OLD MAN EMU POLYURETHANE SPRING BUSH DIMENSIONS …………………………………
SUSPENSION FITTING KITS ……………………………………………………………………...……
LEAF SPRING TRIM PACKERS ………………………………………………………………….…….
CLIP LINER KITS FOR LEAF SPRINGS ………………………………………………………..………
INTER-LEAF LINER KIT FOR LEAF SPRINGS ………………………………………………….…….
LEAF SPRING CENTRE BOLT SLEEVES …..…………………………………………………………
ADDING OR REMOVING AN EXTRA LEAF ………...…………………………………………………
REPLACEMENT MAIN OR SECOND LEAF ……………………………………………………………
NUMERICAL SPRING & SHOCK / STRUT BUSH APPLICATIONS ………………………………
© ARB Corporation Limited, Old Man Emu Division P.O. Box 105 Kilsyth, Vic. 3137 Australia.
All rights reserved. No part of this catalogue may be reproduced or copied in any form or by any means (graphic, electronic or mechanical,
including photocopying, recording, taping or information systems) without the written permission of the publisher.
TORSION BAR SPECIFICATIONS ………………………………………………………………………
LEAF SPRING SPECIFICATIONS ……………………………….....…..………………………………
COIL SPRING SPECIFICATIONS …..…..…..…………………………………………………………
NITROCHARGER SPECIFICATIONS …..………………………………………………….…………
STEERING STABILISER SPECIFICATIONS …..……..………………………………………………
RECOMMENDED FITTING TIMES ……………………………………………………….….…...…..…
SHOCK ABSORBER MOUNT TYPE ……………………………………………………………………
PAGE 3
-
8/19/2019 Ome Aplication Guide 30 September 2015
4/147
SHOCK ABSORBERS: Where two part numbers are given for the same application the part with the asterisk (*) indicates theshock
absorber with the firmer ride.
SPRING BUSH: OME polyurethane spring eye bushes on installation must only be greased in the bore and on the flange area and
regularly thereafter with OME polyurethane grease.
STEERING STABILISER: Designed as a larger capacity replacement for the OE part and incorporates 50/50 neutral valving.
GUIDE TO SELECTION
Terminologies & Explanations
Please note most suspension development has been carried out on Australian specification models. Therefore, some differences
may exist between the same model in another country. Overseas customers will need to make allowances for these possible
differences.
Supplying all items shown on suspension selection charts will ensure the system can be fitted, however, there will be vehicles
which will not require all items, eg. trimming kits, caster kits, all U bolts shown, etc. Actual individual vehicle requirements can
only be determined when the suspension system is fitted.
GVM - GROSS VEHICLE MASS: Set by the vehicle manufacturer and is determined by brake, axle, differential and tyre
specifications. Exceeding GVM ratings can have legal and safety implications
and is not recommended.
LOAD RATING - FRONT: Weights shown are maximum permissible loads with regard to
accessories fitted, eg. Bull bar, winch, dual battery, etc.
LOAD RATING: The explanations below indicates the passenger and load weights that will provide optimum ride and handling.
REAR:
LIGHT LOAD: Full passenger load with luggage weights up to 150kg.
MEDIUM LOAD: Full passenger load with luggage weight varying from 200kg to 350kg.
CONSTANT LOAD: The minimum constant load shown on selection chart is required for optimum spring performance.
Please note: These loads are approximate only. Refer to individual vehicle selection for load specifications.
LIFT HEIGHT: Is shown as a guide only and equates to the amount of lift over the vehicle's originalride height. This amount can vary from vehicle to vehicle.
OE: Original Equipment, as supplied by the manufacturer of the vehicle.
CASTER
KIT:
The
OMECA77B,
CALR1
and
CALR2
kits
consist
of
4
eccentric
bushes
which
are
pressed
into
the
leading
arms
of the vehicle. This will induce positive caster into the front geometry.
LEAF SPRINGS: A & B springs can be used to compensate for uneven vehicle weight distribution. Springs marked "A" have a
greater camber height than springs marked 'B'. 'A' type springs are generally fitted to the driver's side and 'B' springs to the
passenger side.
COIL SPRINGS: A & B springs are used to compensate for uneven vehicle weight distribution. 'A' type springs are
generally higher in free high than the 'B' spring. Individual coil specifications are listed in the back of this publication.
GEARBOX PACKER KIT: Designed to space down the gearbox cross member from the chassis to reduce tail shaft flange angle
thereby reducing driveline vibration.
GREASABLE SHACKLES: Replacement for original shackles allow easy regular greasing of polyurethane spring eye
bushes.
TRIM PACKERS: The prime purpose of a trim packer is to correct slight vehicle leaning.
VEHICLES WITH LEAF SPRINGS UNDER SLUNG: Trim packer when fitted will reduce suspension height.
VEHICLES WITH LEAF SPRINGS OVER SLUNG: Trim packer when fitted will increase suspension height.
VEHICLES WITH COIL SPRINGS: Polyurethane trim packer main purpose is to correct slight vehicle
trimming problems and will increase ride height when fitted.
PAGE 4
-
8/19/2019 Ome Aplication Guide 30 September 2015
5/147
SELECTION ADVICE
STEERING
STABILISERS
YEAR FRONT
All 60092 OMESD40
2008 on 9000911
2002 to 2007 Cherokee/Liberty KJ ALL Models (OME Springs) 9000911
1984 on Cherokee XJ - Petrol & Diesel 60052 OMESD409
2006 on 60066 OMESD48
1997 to 2006 Wrangler TJ *60047 / 60046 OMESD409
1986 to 1996 Wrangler YJ 60098 OMESD40
DAIHATSU
1992 to 1997 Feroza II F310 60040
1988 to 1992 Feroza I F300 600401993 on Rocky F78 Wide Track 60031 OMESD31
12 '86 on
FORD
2006 to 2011 600224
2011 on 60123 / 6012115
2008 to 2010 60123 / 6012115
1985 to 2005 Courier/Ranger Pick Up 600224
1987 to 1993 Raider Wagon 60022
To 8/89 OMESD34
9/89 on OMESD36
HOLDEN/ISUZU/CHEVY
2012 on GM/Isuzu Pick Up Colorado / DMAX *9002313
/ 9002213
2008 to 2011 GM/Isuzu Pick Up Colorado RC / DMAX 60031
2003 to 2011 Rodeo Pick Up RA Models 600317/81 to 2003 Rodeo/Isuzu Pick Up KB4, KBD4 & TFS 60031
1992 to 2004 Jackaroo/Trooper & Monterey (Isuzu Wagon) 60031
1982 to 10/86 Jackaroo/Trooper 60031
99 to 6/2003 Frontera Wagon 60031
1995 to 1998 Frontera UT 60031
HUMMER
07/2007 on H3 90001
Cont.
60074
60023
N/AN/A
60074
*60064 / 60032
N/A
2011 on Ranger PX *9002013
/ 9001913 *60102 / 60101 /
60023
All Maverick Wagon & Hard Top *60013 / 61012 *60015 / 61014
Ranger PJ All Models *60102 / 60023
*60064 / 60032
NITROCHARGER SPORT SELECTION
Firm Valving
The firm part number should be selected whenever heavy rate springs are f it ted, as the valving has been specif ically
developed to control the higher spring rates. The firmer valving will provide better control when cornering, while also
preventing axle bounce over rough roads.
If a softer valved selection is fitted with a heavy rate spring the vehicle's rebound handling will be reduced. This will be
evident by axle bounce over rough roads, dipping under braking or cornering and wallowing over undulating roads.
Therefore, the life expectancy of the shock absorbers will be considerably shortened and, when loaded, ride and handling
qualities will also be reduced.
Soft Valving
It should be explained to the customer that if their springs are sagged and tired that this would cause the shock absorbers
to work a lot harder.
Where there is a choice of part numbers it is important the right selection is made with consideration given to type of
spring rates and customer applications.
Valved specifically for light to medium rate springs. Most suitable for customers wanting a comfortable ride and regularly
carry light to medium loads. Under full GVM load a slight amount of body roll during cornering and highway speed
manoeuvring can occur.
A RECOMMENDATION FOR CUSTOMERS BUYING 4 REPLACEMENT SHOCK ABSORBERS
By the time a customer has decided to replace the old and well used original shock absorbers there is every chance that
the original springs are also ready for replacement.
*60049 / 6004810
N/A
Grand Cherokee ZJ 60093
Cherokee/Liberty KK All Models 60069
OME NITROCHARGER SPORT
60069
60053
Wrangler JK - All Models 60067
60099
SHOCKS & STRUTS
VEHICLE DESCRIPTION REAR
CHRYSLER JEEP
60124 / 60125 /
60126 / 601272011 on Grand Cherokee WK2 90026
REMEMBER: A good set of shock absorbers will not overcome a bad set of springs.
60023
*60117 / 60116
60045
*60064 / 60032
F250 & F350 Diesel 60122
F250 & F350 Diesel 60122
11/86 to 3/92 Jackaroo/Trooper 60031*60063 / 60009
8
*60064 / 60032
*60064 / 60032
PAGE 5
-
8/19/2019 Ome Aplication Guide 30 September 2015
6/147
STEERING
STABILISERS
YEAR FRONT
HYUNDAI
2001 on Terracan V6 60040
2005 on Terracan Diesel 60040
1999 to 2004 Discovery Series II (Not Suitable for Airbag Models) 60024 OMESD02
1991 to 1999 Discovery Series I 60037 OMESD11
To 5/1995 Range Rover (Not Suitable for Airbag Models) 60037 OMESD11Defender & County 90, 110 & 130 60037 OMESD32
*60070 / 60018 OMESD32
MAZDA
1987 to 2006 B2600 Pick Up All Models 600224
MERCEDES
G-Wagon G350 Bluetech / G55 AMG Models 60113
MITSUBISHI
4/2000 on Pajero/Montero NS, NM, NP & NT LWB & SWB *9000713
/ 9000613
91 to 3/2000 Pajero/Montero (Coil Springs) NH, NJ, NK & NL 60040
91 to 3/2000 Pajero/Montero (Leaf Springs) NH, NJ, NK & NL 60040
1989 to 5/91 Pajero/Montero (Coil Springs) NF & NG 60051
2009 on Challenger/Montero Sport KH 9000813
2000 to 2008 Challenger/Montero Sport (Coil Springs) 60040
1998 to 2000 Challenger/Montero Sport (Leaf Springs) 60040
7/2006 on Triton/L200 ML & MN All Models 9000813
10/96 to 6/06 Triton/L200 MK Models 60040
1993 to 9/96 Triton/L200 MJ Models 60051
91 to 8/96 Triton/L200 V6 (OE Springs) 60051
10/86 to 1993 Triton/L200 (V6 & 4 Cylinder) ME, MF, MG, MH 60051
To 1986 L200 MA, MB, MC & MD 60051
To 9/1986 L300 Vans SA, SB, SC & SD 60051
2/2000 on Patrol Y61 (GU) SWB & Wagon *60013 / 61012 OMESD01
1997 to 1/00 Patrol Y61 (GU) Wagon & SWB *60013 / 61012 OMESD11
1997 on Patrol Y61 (GU) Cab Chassis (Leaf Spring Rear) 60055
1997 on Patrol Y61 (GU) Cab Chassis (All Coil Springs) *60013 / 61012 OMESD11
To 8/1989 Patrol Y60 (GQ) Wagon & SWB *60013 / 61012 OMESD34
9/1989 on Patrol Y60 (GQ) Wagon, SWB & Cab Chassis *60013 / 61012 OMESD36
1988 to 7/97 Patrol Y60 (GQ) Ute & Cab Chassis (Leaf Springs) 60068 OMESD22
2005 on Pathfinder R51 9000313
1986 to 8/95 Pathfinder/Terrano WD21 60031 OMESD35
2005 on Navara D40 9000313
10/2002 on Navara D22 600342
1/86 to 8/02 Navara D21 & D22 Pick Up 600212
OMESD356
1/1986 on Navara D21 & D22 Pick Up 4x2 600402
1980 to 1985 720 Ute & Cab Chassis 600402
1996 to 1999 Terrano II 4x4 (European Models) 60031
2005 on Xterra 9000313, 14
SSANGYONG
To 2005 Musso, Sport Utility & Korando Models 60031
2009 on Equator (US Market Only) 9000313
TOYOTA
2007 on LandCruiser 200 Series V8 *91005 / 90017
3/1998 on LandCruiser 100 Series (IFS) *60001 / 60000
3/1998 on LandCruiser 100 & 105 Series (Front Live Axle) *60070 / 60018 OMESD24
4/90 to 1998 LandCruiser 80 Series *60070 / 60018 OMESD24
2009 on Prado 150 Series LWB 9001013
Cont.
LAND ROVER
NITROCHARGER SPORT SELECTION
60060
*60039 / 60038
*60003 / 600021
*60015 / 610143
VEHICLE DESCRIPTION REAR
*60039 / 60038
60059
*60025 / 60026
SHOCKS & STRUTS
*60039 / 60038
2006 to 2011
OME NITROCHARGER SPORT
60058
60058
*60033 / 60019
60032
60058
Mazda BT50 All Models 600224 *60102 / 60101 /
60023
N/A
*60064 / 60032
60054
*60110 / 60017
60060
60023
*60015 / 61014
*60015 / 61014
60050
Mazda BT50 *9002013
/ 9001913 *60102 / 60101 /
60023
60041
*60081 / 60080
60016
*60064 / 60032
60035
60035
60017 14
SUZUKI
60017
*61030 / 61029
*60071 / 600201
N/A
*60071 / 600201
60114
To 4/1991
60036
60058
*60075 / 60076
60054
Pajero/Montero (Leaf Springs) NA, NB, NC, ND, NE, NF
& NG60051 *60036 / 60057
2011 on
Defender & County 110 & 130 Long Travel *60070 / 60018
*60036 / 60057
60056
*60015 / 610143
*60036 / 60057
60057
1984 on
NISSAN
*60015 / 610143
PAGE 6
-
8/19/2019 Ome Aplication Guide 30 September 2015
7/147
STEERING
STABILISERS
YEAR FRONT
TOYOTA (continued)
2009 on Prado 150 Series SWB *9001013
/ 9001613
7/96 to 10/02 Prado 95 & KZJ90 Series 90004
1985 to 1999 LandCruiser 75 Series *60063 / 60009 OMESD24
1985 on LandCruiser 70, 73 & 74 Series 60009 OMESD24
All LandCruiser HZJ71 & HJZ74 Series 60008 OMESD24
All LandCruiser II Wagon 60089
60096 60095
RHS LHS
1986 to 3/90 LandCruiser 60,61 & 62 Series (Rear Lower Pin 19mm) *60063 / 60009 OMESD24
1980 to 1986 LandCruiser 60 Series (Rear Lower Pin 16mm) *60063 / 60009 OMESD24
All LandCruiser 45 - 47 Series 60097 OMESD23
All LandCruiser 40 - 42 Series SWB 60097 OMESD23
2004 on *9000213
/ 9001113
2005 on *9000213
/9001113
60044 600437
LHS RHS
9/83 to 8/97 60061 OMESD21
1988 to 8/97 60072
To 8/1983 60061 OMESD21
2005 on *9000013
/ 9002113
1998 to 2004 90004
2010 on 9001013
2003 to 2010 9000013
1996 to 2002 90004
1990 to 1996 60072 OMESD33
1986 to 1990 60072 OMESD33
2010 on *90013 / 90012
1.
2.
3.
to sway bar due to increased wheel droop.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13. No top mounting bushes supplied, refer to vehicle specific application to select relevant upper strut bushes. OE bushes may be re-used if in good condition.
14. FK42 is a mandatory fitment to space sway bar link away from shock absorber.
15.
It may be necessary to slightly increase the clearance in the front wishbone to allow the shock absorber to fit . Do not modify the shock absorber.
*60005 / 60004
*60081 / 600801
VOLKSWAGEN
HiLux LN65, YN65, LN106 & RN105 (All Leaf Suspension)
60081 1
*60064 / 600321
2006 to 2010
*60065 / 60062
*600041 / 60112
1*60080
1
/ 600861
4 Runner (IFS) Front Torsion Bar/Rear Coil Springs 60073
*60065 / 60062
Fortuner
HiLux Tiger LN172, LN167, KZN165, RZN174 &
HiLux/4 Runner LN107, RN105, RN110 & LN111 (IFS)
2007 on LandCruiser 78 & 79 Series V8 Diesel Model 60008*60011 / 60010 /
60109
REARVEHICLE DESCRIPTION
4/2003 to 09 Prado 120 Series LWB & SWB (Not TEMS/Grande Models) *9000013
/ 9002113
*600041 / 60112
1
2007 on LandCruiser 76 Series Wagon - V8 60008
OMESD33
1999 to 2006
*60064 / 60032
*60064 / 60032
*60007 / 60006
1984 to 1990 60094Bundera RJ70
NITROCHARGER SPORT SELECTION
OMESD47
60062
RZN169 (IFS)9/97 to 2004
*60064 / 60032
60042
*60065 / 60062
OME NITROCHARGER SPORT
SHOCKS & STRUTS
HiLux Vigo KUN26R, GGN25R
60090
*60111 / 60011 /
60010
LandCruiser 78 & 79 Series - 6 cylinder models
60044
2010 on FJ Cruiser *9001013
/ 9001613
*60011 / 600101
*60080 / 60086
FK16 20mm bump stop spacer kit is a mandatory fitment.
OMESD40 will only fit left hand drive models.
OMEB11 bush kit is required to convert lower 19mm bush t o 16mm ID.
60043 is 20mm longer and must only be installed to right hand side.
OMESD35 will suit D21 models only.
OME Struts can only be installed with OME Coil Springs. No top mounting bushes supplied, re-use OE bushes.
FK22 support brackets must be installed to upper shock mounting brackets on late 1996 on models manufactured in Thailand.
FK18 rear sway bar extension bracket for LWB Models and FK24 f or SWB Models are mandatory fitments with Nitrochargers to prevent damage
NOTES: *first part number has firmer valving.
HiLux LN46 & RN46 (All Leaf) (Rear Lower Pin 16mm)
4 Runner (USA)
Tacoma V6
*600051 / 60004
1
*60027 / 60028
60008*60011 / 60010
1 /
60109
4 Runner (USA)
When remaining stock of OME P/No. is exhausted no further product will be available.
Amarok *60083 / 60082
*600811 / 60080
1
FJ Cruiser *9000013
/ 9002113
*60065 / 60062
60078 / 60077
60091
Tacoma V6 & 4 Cylinder
not Grande only) OME660 (all other models).
4 Runner (IFS) Rear Leaf Springs 60065
Sorento BL To 09, FJ Criser 06 On, 4 Runner 10 On, LandCruiser 76 LWB, 80, 100, 200 Series & Prado 150 09 on coil sprung not Kakadu, 120 Series 10/02 to 09
Shock lower body stone guards are recommended fitment to rear shocks to protect against severe stone peppering encountered on loose road surfaces. OME661 (suits
OMESD24
OMESD47
OME front shock 60121 is not suitable as an OE replacement. When fitting our longer OME shock 60121 you must fit: FK71 brakeline kit to extend/drop the brakelines, FK72
sway bar kit to lower the front swaybar, FK70 radius arm drop bracket kit to 2011 on models, FK80 to 08 - 10 models as if not fitt ed you may over stretch the front brakelines.
No top mounting bushes supplied, re-use OE bushes.
4 Runner Front & Rear Coil Springs (USA) *60027 / 60028
PAGE 7
-
8/19/2019 Ome Aplication Guide 30 September 2015
8/147
170mm long
210mm long
250mm long
290mm long
Note: The last 3 numbers of the part number indicates the length of the dirt shield.
FrontOpen
(mm)
Closed
(mm)Rear
Open
(mm)
Closed
(mm)
Jeep JK 60066L 693 404 60067L 706 422
60066M 646 382 n/a n/a n/a
60052L 678 392 60053L 622 366
60047L 678 392 60049L 622 366
60013L 555 322 60015L 716 426
60070L 667 381 60071L 673 387
60018L 667 381 60020L 673 387
60037L 593 349 60039L 600 366
60024L 627 388 60025L 627 388
60037L 593 349 60039L 600 366
Remarks
600 366Non Airbag Models
Discovery II to 04
Defender 90, 110, 130
Sport Dust Boot - Black 141-032-028
REPLACEMENT NITROCHARGER SPORT DIRT SHIELDS PART NUMBER
LandCruiser 80, 100
NITROCHARGER SPORT L SERIES
Vehicle
Jeep XJ
Jeep TJ
Patrol Y60, Y61
Hard Sport Dirt Shield 384006210
Hard Sport Dirt Shield 384006250
Hard Sport Dirt Shield
(Middle Front)
349
Confluted Boot OME412422
NITROCHARGER SPORT SELECTION
Hard Sport Dirt Shield 384006170
384006290
applies". This will prevent any future misunderstanding.
competition racing. The fitter must also note on the customer's receipt "racing application no warranty
The fitter selling these shocks must inform the customer there is no warranty due to the severe nature of
Warranty Implications
Discovery I to 99
Refer to page 135 to 137 of the OME International Application Catalogue for open and closed lengths of equivalent
standard Nitrocharger Sport models.
Range Rover to 5/95
60037L 593 60039L
PAGE 8
-
8/19/2019 Ome Aplication Guide 30 September 2015
9/147
SHOCK ABSORBER SELECTION ADVICE
STEERING
STABILISERS
YEAR FRONT
2006 to 2010 Comander XK *N219S/N188S
2008 on Cherokee/Liberty KK ALL Models NS13116
2002 to 2007 Cherokee/Liberty KJ ALL Models (OME Springs) *NS131/NS13016, 18
2006 to 2010 Grand Cherokee WH & WK *N219S/N188S16
1998 to 2005 Grand Cherokee WJ & WG N11111
1992 to 1998 Grand Cherokee ZJ - 6 cylinder & V8 engines *N3918
/N39C18
OMESD4010
1984 on Cherokee XJ - Petrol & Diesel N35 OMESD4010
To 1986 Cherokee Wagon & J10 Ute (Full Size) N411
1974 to 1986 Cherokee W10 & J20 Utes and Cab Chassis N411
To 1986 CJ5, 6, 7, & 8 *N41/N811
2006 on *N196 OMESD48
1997 to 2006 Wrangler TJ *N66/N66C18
OMESD4010
1986 to 1996 Wrangler YJ N33 OMESD4010
DAIHATSU
1992 to 1997 Feroza II F310 N18
1988 to 1992 Feroza I F300 N18
1993 on Rocky F78 Wide Track N26F18
OMESD3118
'86 on
1984 to 8/93 Rocky F70, F75, F80 & F85 Hard Top with Leaf Springs OME027 OMESD3118
'86 on
1984 to 1993 Rocky F77 & 78 Tray Top with Leaf Springs OME027
All Scat Hard Top N41/N81
FORD
2006 to 2011 Ranger PJ All Models N19418
/N1878, 18
1985 to 2005 Courier/Ranger 1 Tonne N518,18
To 2001 Explorer 4x4 Only N16
2005 to 2008 Ford F250 & F350 N195
1999 to 2004 Ford F250 & F350 N178
1987 to 1993 Raider Wagon N5118
To 8/89 OMESD34
9/89 on OMESD36
All Maverick Ute & Cab Chassis N2818 OMESD22
1981 to 1989 Bronco (Single I Beam Front End)
1981 to 1989 Bronco (Dual I Beam Front End)
1981 to 1989 F100 4x4 & 4x2 (Single I Beam)
HOLDEN/ISUZU/CHEVY
2008 to 2011 N65
2008 to 2011 GM/Isuzu Pick up - Colorado V6/DMAX Petrol N65
2003 to 2011 Rodeo Pick Up - RA Models N65
2003 to 2008 Rodeo Pick Up - RA & RA7 Models N65
GM/Isuzu Pick up - Colorado RC/DMAX Diesel Models
Wrangler JK - All Models *N198
OME NITROCHARGERS,
N5318
N36
N561
STRUTS & CARTRIDGES
N3418
*N42/N89
*N220/N190
NITROCHARGERS & STEERING STABILISERS
Therefore, the life expectancy of the shock absorbers will be considerably shortened and when loaded ride and handling
qualities will also be reduced.
REMEMBER: A good set of shock absorbers will not overcome a bad set of springs.
By the time a customer has decided to replace the old and well used original shock absorbers there is every chance that the
original springs are also ready for replacement.
Where there is a choice of part numbers it is important the right selection is made with consideration given to type of spring
rates and customer applications.
The firm part number should be selected whenever heavy rate springs are fit ted, as the valving has been specif ically
developed to control the higher spring rates. The firmer valving will provide better control when cornering, while also
preventing axle bounce over rough roads.
Valved specifically for light to medium rate springs. Most suitable for customers wanting a comfortable ride and regularly
carry light to medium loads. Under full GVM load a slight amount of body roll dur ing cornering and highway speed
manoeuvring can occur.
It should be explained to the customer that if their springs are sagged and tired that this would cause the shock absorbers to
work a lot harder.
Firm Valving
Soft Valving
A CAUTION FOR CUSTOMERS BUYING 4 REPLACEMENT SHOCK ABSORBERS
If a softer valved selection is f it ted with a heavy rate spring the vehicle's rebound handling will be reduced. This wil l be
evident by axle bounce over rough roads, dipping under braking or cornering and wallowing over undulating roads.
*N220/N190
N423
VEHICLE DESCRIPTION
N132
N132
CHRYSLER JEEP
REAR
N43
All Maverick Wagon & Hard Top *N2118
/N23F18 N29
N117
See Sport Selection
N43
N5318
*N49/N96
N43
N423
*N56/N54
N33
N675
*N42/N89
*N42/N89
N423
*N48/N97
N179
N17
N179+N1809
*N48/N97
N25
*N42/N89
PAGE 9
-
8/19/2019 Ome Aplication Guide 30 September 2015
10/147
STEERING
STABILISERS
YEAR FRONT
HOLDEN/ISUZU/CHEVY (continued)
7/81 to 2003 Rodeo/Isuzu Pick Up KB4, KBD4 & TFS *N65/N26F18
1992 to 2004 Jackaroo/Trooper & Monterey (Isuzu Wagon) N65
11/86 to 3/92 Jackaroo/Trooper *N65/N26F18
1982 to 10/86 Jackaroo/Trooper *N65/N26F18
99 to 6/2003 Frontera Wagon *N65/N26F18
1995 to 1998 Frontera 2 & 4 Door UT *N65/N26F18
1985 to 1987 Drover QB (OE Springs) OME025 OMESD30
1985 to 1987 Drover QB (OME Springs Fitted) OME015 OMESD30
KIA
2006 to 2009 Sorento All BL Models N147S + N148S16
02 to Late 06 Sorento All Models N147S + N148S16
1999 to 2004 Discovery Series II (Not Suitable for Air Bag Models) *N10718
/N107C18 OMESD02
1991 to 1999 Discovery Series I *N115/N45F18 OMESD11
1994 to 2001 Range Rover MK II P38A Models N17614
To 5/1995 Range Rover (Not Suitable for Air Bag Models) *N115/N45F18 OMESD11
1984 on Defender & County 90, 110 & 130 *N115/N45F18 OMESD32
To 1984 Land Rover Series I, II & III (80" & 109") N78 OMESD11
To 1984 Land Rover Series II & III (88" SWB) N78 OMESD11
MAHINDRA
1990 to 1993 Bushranger & Stockman CJ340 *N41/N811
MAZDA
06 to 2011 Mazda BT50 All Models *N19418
/N1878,18
1987 to 2006 B2600 Pick Up All Models N518,18
MITSUBISHI
4/2000 on Pajero/Montero NS, NM, NP & NT (3.2 Diesel) N129S19
4/2000 on Pajero/Montero NS, NM, NP & NT Wagon & Hard Top (V6) N129S19
N109S16, 18
1991 to 3/00 Pajero/Montero (Coil Springs) NH, NJ, NK & NL N18
1991 to 3/00 Pajero/Montero (Leaf Springs) NH, NJ, NK & NL N18
1989 to 5/91 Pajero/Montero (Coil Springs) NF & NG See Sport Selection
2009 on Challenger/Montero Sport KH N186S19
2000 to 2008 Challenger/Montero Sport (Coil Springs) N57G18
1998 to 2000 Challenger/Montero Sport (Leaf Springs) N57G18
7/2006 on Triton/L200 ML & MN All Models N186S19
10/96 to 6/06 Triton/L200 MK All Models *N18/N57G18
1991 to 8/96 Triton/L200 V6 (OE Springs) See Sport Selection
1991 to 8/96 Triton/L200 (V6) MH & MJ See Sport Selection
1986 to 8/96 Triton/L200 (4 Cylinder) ME, MF, MG, MH & MJ See Sport Selection
To 1986 L200 MA, MB, MC & MD See Sport Selection
To 9/1986 L300 Vans SA, SB, SC & SD See Sport Selection
2/2000 on Patrol Y61 (GU) SWB & Wagon *N19/N19C18 OMESD01
1997 to 1/00 Patrol Y61 (GU) Wagon & SWB *N19/N19C18 OMESD11
1997 on Patrol Y61 (GU) Cab Chassis (Leaf Spring Rear) *N19/N19C18
1997 on Patrol Y61 (GU) Cab Chassis (All Coil Springs) *N19/N19C18 OMESD11
To 8/1989 Patrol Y60 (GQ) Wagon & SWB *N2118
/N23F18 OMESD34
9/1989 on Patrol Y60 (GQ) Wagon, SWB & Cab Chassis *N2118
/N23F18 OMESD36
1988 to 7/97 Patrol Y60 (GQ) Ute & Cab Chassis (Leaf Springs) N28
20
OMESD228/83 to 1988 Patrol MQ Wagon, SWB, Ute & Cab Chassis N49 OMESD22
1980 to 7/83 Patrol MQ Wagon, SWB, Ute & Cab Chassis *N47/N96 OMESD22
1967 to 1979 Patrol 60 & G60 Series N49 OMESD22
2005 on Pathfinder R51 N183S19
2/99 to 2005 Pathfinder R50 N145S/N146S
1996 to 1/99 Pathfinder R50 N145S/N146S
1986 to 8/95 Pathfinder/Terrano WD21 N26F18 OMESD35
2005 on Navara D40 N183S19
10/2002 on Navara D22 N1514,18
1/86 to 8/02 Navara D21 & D22 Pick Up N584,18
OMESD3512
1/1986 on Navara D21 & D22 Pick Up 4x2 *N18/N57G4, 18
1996 to 2005 Terrano II 4x4 (European Models) (OE Springs) *N65/N26F18
To 4/1991
N3018
N104
N49
N89
*N48/N97
*N48/N97
*N29/N29C6,18
*N29/N22F18
See Sport Selection
N25
VEHICLE DESCRIPTION
N25
*N42/N89
N30E
N30E
N3018
*N29/N29C6,18
N61
NITROCHARGERS & STEERING STABILISERS
*N59/N54
*N20418
/N152
*N20418
/N152
N6418
*N56/N54
*N56/N54
N18918
N116
N116
N5318
N69
-
*N41/N811
*N42/N89
OME NITROCHARGERS,
REAR
*N42/N89
-
LAND ROVER
See Sport Selection
Pajero/Montero (Leaf Springs) NA, NB, NC, ND, NE, NF &
NGSee Sport Selection *N56/N54
OME013
STRUTS & CARTRIDGES
*N44/N4618
N9018
N149
N102
OME023
*N42/N89
N17714
N205
*N44/N4618
N10818
*N44/N4618
NISSAN
N3018
N3018
*N29/N22F18
*N29/N29C6,18
*N59/N56
*N59/N56
N185
*N41/N81
PAGE 10
-
8/19/2019 Ome Aplication Guide 30 September 2015
11/147
STEERING
STABILISERS
YEAR VEHICLE DESCRIPTION FRONT
2005 on Xterra N183S19
1980 to 1985 720 Ute & Cab Chassis *N18/N57G4, 18
To 2005 Musso, Sport Utility & Korando Models N65
2009 on Equator (US Market Only) N183S19
2001 to 2005 XL7 Wagon V6 N103S17
8/2005 on Grand Vitara Wagon Models N217S + N218S
1995 to 2005 Grand Vitara 4 & 6 Cylinder N103S
7/88 to 2005 Vitara TA01 & TD01 & Wagon N103S
7/88 to 2005 Vitara TA012 TD01 SWB N103S
All Jimny SN413 (OE Springs) OME028
All Jimny SN413 (OME Springs) OME028
To 2004 Santana Samurai All Models OME034 OMESD3013
1982 to 1995 Sierra SJ410 & SJ413 Ute MG410 / WT1000cc (OME Springs) OME015 OMESD3013
1988 to 1996 Sierra SJ70, SJ71, SJ413, MG410 / WT1300cc (OME Springs) OME025 OMESD3013
1978 to 12/81 LJ80 & LJ80V SWB (OME Springs) OME015 OMESD3013
1978 to 12/81 LJ80 & LJ80V SWB (OE Springs) OME025 OMESD3013,14
1978 to 12/81 LJ80 Ute (OME Springs) OME015 OMESD3013
1974 to 12/81 540, LJ10, LJ20 & LJ50 (OME Springs) OME015
TOYOTA
2007 on LandCruiser 200 Series V8 N208S9
3/1998 on LandCruiser 100 Series (IFS) *N19918
/N133/N10018
3/1998 on LandCruiser 100 & 105 Series (Front Live Axle) *N73 OMESD24
4/90 to 1998 LandCruiser 80 Series *N73 OMESD24
4/2003 to 09 Prado 120 Series (Except TEMS/Grande Models) *N201S18, 19
/N140S19
2007 on LandCruiser 78 & 79 Series V8 Diesel Model *N181/N10618 OMESD47
2007 on LandCruiser 76 Series Wagon - V8 *N181/N10618 OMESD47
1999 to 2006 LandCruiser 78 & 79 Series - 6 cylinder models N10618 OMESD24
1985 to 1999 LandCruiser 75 Series *N5018
/N9218 OMESD24
All LandCruiser II LJ/RJ70, LJ/KZJ71 & LJ/KZJ78 Models N77 OMESD24
1984 to 1990 LandCruiser Bundera, SWB, LJ70 & RJ70 Series N114
1985 on LandCruiser 70,73 & 74 Series *N5018
/N9218 OMESD24
All LandCruiser HZJ71 & HJZ74 Series N10618 OMESD241986 to 3/90 LandCruiser 60,61 & 62 Series (Rear Lower Pin 19mm) *N50
18/N92
18 OMESD24
1980 to 1986 LandCruiser 60 Series (Rear Lower Pin 16mm) *N5018
/N9218 OMESD24
1980 to 1986 LandCruiser 60 Series (OE Springs) N5018 OMESD24
1986 to 3/90 LandCruiser 60 Series (OE Springs) N5018 OMESD24
To 11/1980 N43
To 12/1984 *N41/N81 OMESD23
To 12/1984 LandCruiser BJ, FJ & HJ 40 & 42 Series All Models *N41/N81 OMESD23
To 12/1984 LandCruiser BJ, FJ & HJ 40 & 42 Series All Models (OE Springs) N41 OMESD23
2004 on *N167S19
/N166S19
2006 to 2010 N140S19
2005 on *N167S19
/N166S19
9/83 to 8/97 N8418 OMESD21
9/83 to 8/97 N8418
OMESD211988 to 8/97 N98
1988 to 8/97 N98 OMESD33
To 8/1983 N8418 OMESD21
To 8/1983 N8418 OMESD21
2003 to 2012 N140S19
1996 to 2002 *N91S/N91SC18
1990 to 1996 N98 OMESD33
1986 to 1990 N98 OMESD33
1986 to 1990 N98 OMESD33
1984 to 1986 N8418 OMESD21
1984 to 1986 N8418 OMESD21
1982 to 1983 *N41/N81
N864 Runner Front & Rear Coil Springs (USA)
N85/N94
4 Runner (IFS) Rear Leaf Springs N85/N94
4 Runner (Front Live Axle)
Blizzard
N85/N94
*N42/N89HiLux LN46 & RN46 (All Leaf) (Rear Lower Pin 16mm) (OE Springs)
HiLux/4 Runner LN107, RN105, RN110 & LN111(IFS)(OE Springs)
9/97 to 2004HiLux Tiger LN172, LN167, KZN 165, RZN174 &
RZN169 (IFS)
HiLux LN65, YN65, LN106 & RN105 (OE Springs)
*N85/N94
HiLux LN46 & RN46 (All Leaf) (Rear Lower Pin 16mm)
*N9018 /N85
*N89/N952
OMESD33
*N9018
/N85*N85/N94HiLux/4 Runner LN107, RN105, RN110 & LN111 (IFS)
HiLux LN65, YN65, LN106 & RN105 (All Leaf Suspension)
N8018
N9019 /N85
*N7518
N105
4 Runner (IFS) Front Torsion Bar/Rear Coil Springs N72F
4 Runner (USA) N141
N112 & N113
Fortuner N191
LandCruiser 45 & 47 Series *N42/N89
*N89/N95
N42
LandCruiser FJ55
*N9018
/N85/N94
N9019/N85
N42
N42
-
N48
4 Runner (Front Live Axle) (OE Springs)
4 Runner (IFS) Rear Leaf Springs (OE Springs)
N185
*N21018
/N209
N75F18
FJ Cruiser N141
HiLux Vigo KUN26R, GGN25R *N169/N168
N/A
OME029
OME013
OME013
N43
N197
*N20018
/N101
*N20218
/N141
OME013
SSANGYONG
SUZUKI
*N42/N89/N95
N79
*N85/N94
N118
REAR
OME NITROCHARGERS,
*N74E/N71E2, 18
N75F18
OME036
N105
OME03017, 18
OME013
N197
N18520
OME035
N105
NISSAN (continued)
STRUTS & CARTRIDGES
NITROCHARGERS & STEERING STABILISERS
N32
7/96 to 10/02 Prado 95 & KZJ90 Series*N91SB
18/N91S
/N91SC18
*N86
*N42/N89
*N74E/N71E2, 18
PAGE 11
-
8/19/2019 Ome Aplication Guide 30 September 2015
12/147
STEERING
STABILISERS
YEAR VEHICLE DESCRIPTION FRONT
TOYOTA (continued)
1997 to 2003 N128
2005 to 2010 N140S19
To 2004 *N91S/N91SC18
2007 on N192S16
1985 to 1990 Syncro 4x4 N38S
1.
2. Shock lower body stone guards are recommended fitment to rear shocks to protect against severe stone peppering encountered on loose road surfaces. OME661 (suits
Sorento BL To 09, FJ Criser 06 On, 4 Runner 10 On, LandCruiser 76 LWB, 80, 100, 200 Series & Prado 150 09 on coil sprung not Kakadu, 120 Series 10/02 to 09
not Grande only) OME660 (all other models).
3.
4.
5.
6.
to sway bar due to increased wheel droop.
7. FK22 support brackets must be installed to upper shock mounting brackets on late 1996 on models manufactured in Thailand.
8.N208S can only be installed with OME Coil Springs. No top mounting bushes supplied, re-use OE bushes.
9. N179 suits models with single rear shock set up. Models with twin rear shocks require N179 fitment rear of axle, N180 front of axle, also fitment
of OME660 stone shields are recommended on the N180.
10. OMESD40 will only fit left hand drive models.
11. To obtain maximum ride quality improvement it is recommended that an OME replacement stabiliser bar (OMESTAB1) be fitted.
12. OMESD35 will suit D21 models only.
13. Only suitable for models equipped with original steering damper.
14. Shocks are the same length as OE.
15. OME03019
is shorter than OME029 and must be used with OE coils to ensure coils remain entrapped.
16. No top mounting bushes supplied, re-use OE bushes.
17. FK28 Bump Stop Spacer Kit is a mandatory fitment with N103S Struts.
18. When remaining stock of OME P/No. is exhausted no further product will be available.
19. No top mounting bushes supplied, refer to vehicle specific application to select relevant upper strut bushes. OE bushes may be re-used if in good condition.
20. FK42 is a mandatory fitment to space sway bar link away from shock absorber.
Replacement dust boot part numbers: Nitrocharger OME512422 - Large
Note: Replacement dust boot part numbers: Nitrocharger OME412422 - Small
1981 on F100 and Bronco require bush kit OMEB27 on bottom rear mount.
It may be necessary to slightly i ncrease the clearance in the front wishbone to allow the shock absorber to fit. Do not modify the shock absorber.
NOTES: *first part number has firmer valving.
1983 and on wide track CJ Jeeps require bush kit OMEB27 for the front lower mount and all Cherokee wagons and Mahindra lower
FK18 rear sway bar extension bracket for LWB models and FK24 for SWB models are mandatory fitment with Nitrochargers to prevent damage
FK16 20mm bump stop spacer kit mandatory fitment.
Tacoma V6
front and rear mounts.
N37
VOLKSWAGEN
N182
Tundra
Tacoma V6 N85
N193
Kijang (4th Gen.) N56
STRUTS & CARTRIDGES
NITROCHARGERS & STEERING STABILISERS
OME NITROCHARGERS,
REAR
PAGE 12
-
8/19/2019 Ome Aplication Guide 30 September 2015
13/147
LIFT
F/R UNIT UNIT
YEAR (mm) FRONT PRICE PRICE
97 to 2006 Terios J100 J102 20/20 2531
To 06/2006 Escape BA ZA AB 30/30 2904
04 to 10/2007 Territory SX SY AWD (4WD) 20/30 2533
2006 on Captiva, Antara - V6 (3.2) & Diesel 20/30 2529
01/2007 on CRV 20/20 25352
12/01 to 01/07 CRV MY 2002 MY 2005 -/20 CANNOT LIFT
10/97 to 11/01 CRV RD 30/30 2797
05/06 to 8/08 Santa Fe CM V6 (2.7) & Diesel 20/30 2527
2000 to 2005 Santa Fe 10/20 2907
OME Front - Cartridge, Rear - OME Gas
2005 to 2009 Sportage V6 & Diesel KM Models 20/20 2525
1997 to 2003 Sportage JA MY02 MY03 - V6 20/30 2523
11/00 to 1/04 Freelander V6 & 2Ltr Diesel DOHC - Wagon 10/20 2502
Freelander 4 Cylinder Petrol Wagon 10/20 2504
OME Cartridge to Suit OME Springs
Freelander V6 & 2Ltr Diesel DOHC 10/20 2500
OME Cartridge to Suit OME Springs
2003 on RX-330 4WD MCU38R MY05 - V6 20/30 2509
To 06/2006 Tribute YU MY03 MY04 30/30 2904
X-Trail Petrol 25/25 2511
X-Trail Diesel 25/25 2513
X-Trail Petrol 20/20 2506
X-Trail Diesel 30/30 2507
01 to 10/2006 OME Strut to Suit OME Springs N213S+N214S
7/02 to 2005 Forester MY03 MY04 MY05 20/20 2519
Outback 4th Gen MY04 MY05 MY06 4Cyl 20/20 2516
Outback 4th Gen MY04 MY05 MY06 6Cyl 20/20 2517
03 to 04/2007 Kluger / Highlander MCU20R - V6 20/20 2509
01/2006 on Rav 4 LWB ACA33R - 4 Cylinder 30/30 2539
Rav 4 SWB & LWB ACA20R ACA21R - Diesel 40/40 2799
Rav 4 SWB & LWB ACA20R ACA21R - Petrol 40/40 2793
OME Struts / Gas Shocks to Suit OME Springs
Rav 4 LWB SXA11R MY98 MY99 - Petrol 25/25 2793
OME Struts / Gas Shocks to Suit OME Springs
Rav 4 SWB SXA11R MY98 MY99 - Petrol 25/25 2793
OME Struts / Gas Shocks to Suit OME Springs
NOTES:
1. Fitting instructions available on the Trade Resources website, www.Sellarb.com.au
2. Check for LH wound spring.
3. When remaining stock of OME P/No. is exhausted no further product will be available.
N215S+N216S
2795
2795
2520
2518
25189/03 to 2006
TOYOTA
2510
2540
No Longer Available
No Longer Available
No Longer Available
2512
SUBARU
OME031
2794
OME031
OME031
2796
2508
2007 to 2011
01 to 10/2006
07/00 to 08/05
To 2000
NISSAN
2508
No Longer Available
No Longer Available
2512
2501
LEXUS
MAZDA
2905
2510
KIA
LAND ROVER
NC1381,3
2528
2908
2505
No Longer Available
NC1381,3
To 10/2000
To 10/2000
HYUNDAI
GM / OPEL
2530
2798
HONDA
2538
COMPACT AWD - OME SPRING & SHOCK ABSORBER
2503
2526
2524
2534
FORD
REARVEHICLE DESCRIPTION
2532
DAIHATSU
2905
2536
PAGE 13
-
8/19/2019 Ome Aplication Guide 30 September 2015
14/147
YEAR VEHICLE DESCRIPTION FRONT
LAND ROVER
1991 to 1999 LTR04FR&L
1984 on LTR05F
NISSAN
2/2000 on LTR07F
97 to 1/2000 LTR07F
1997 on LTR07F
To 8/1989 LTR02F
9/1989 on LTR02F
TOYOTA
3/1998 on LTR06F
3/1998 on LTR01F
4/90 to 1998 LTR01F
1999 to 2006 -
9/97 to 2004 LTR08FL/FR
NOTES:
1. Fitment of a rear stone flap kit is mandatory to the control arms to prevent stone damage to the shock absorber.
OME662 suits models with 34mm diameter. OME664 suits models with 43mm diameter.
2. Fitment of OME663 stone flap kit is mandatory to prevent damage to piston rod from stone peppering.
Note: Replacement dust boot part numbers: OME512422 - Large Black
Replacement dust boot part numbers: OME412422 - Small Yellow
On Road/Off Road 40-80psi (2.8 - 5.5 BAR)
Competition 80-100psi (5.5 - 6.9 BAR)
An increase in gas pressure firms up ride quality but will not alter ride height.
LTR REMOTE CANISTERS
LTR06RR&L1
-
LTR04R
LTR SHOCKS
Patrol Y61 (GU) Cab Chassis (All Coil Springs)
Patrol Y60 (GQ) Wagon & SWB
REAR
LTR02R
Discovery Series I
Defender & County 90, 110 & 130
LTR02R
LTR08RL/RR2
LandCruiser 78 & 79 Series (6 cylinder models only)
HiLux LN172, LN167, KZN165, RZN174 &
LTR09RR&L
LandCruiser 100 Series (IFS)
-Patrol Y61 (GU) Series II SWB & Wagon
Patrol Y61 (GU) Series I Wagon & SWB
LandCruiser 80 Series
Patrol Y60 (GQ) Wagon, SWB & Cab Chassis
LTR03RR1
LTR01RR&L1
LandCruiser 105 Series (Front Live Axle)
-
-
GASSING REMOTE CANISTER SHOCK ABSORBERS
MINIMUM/MAXIMUM GAS PRESSURE
MAINTENANCE
part number 2755, from Schrader Automotive Inc is required to guarantee correct pressure
is reached. When using a Schrader valve to gas your LTR Shock absorber first set the
of the remote canister. Gas the canister until the shock absorber shaft is fully extended,
hold gas pressure for 30 seconds, release Schrader valve and remove.
Note: This can be done for you by your Old Man Emu Stockist.
the boot before reattaching it.
pressure gauge to the required pressure. Attach the Schrader valve to the air fitting at the end
body and canister for any mud and debris build up and clean if necessary.
The following checks need to be carried out as part of regular vehicle maintenance.
If the boot is found to be detached thoroughly clean the shock absorber shaft and inside
RZN169 (IFS)
To ensure maximum shock absorber performance check gas pressure every 20,000km.
Ensure all polyurethane bushes, locating washers and nuts are in good condition and
securely fastened.
The only recommended gas to use in LTR shock absorbers is Nitrogen. A Schrader valve,
Check that the polyurethane boot is securely fastened in place and that it is not damaged.
Important: Gassing of your LTR shock absorber should be carried out before fitment to thevehicle. If LTRs are already fitted the vehicle's suspension should be at full extension before
gassing.
To ensure maximum cooling of your LTR shock absorber inspect the shock absorber
PAGE 14
-
8/19/2019 Ome Aplication Guide 30 September 2015
15/147
1
2
1
1
1
2
1
1
2
1
2
1
1
2
1
NISSAN PATROL Y62 - 4.5T GVM
COIL SPRING TRIM PACKER OME95PF5
COMPONENTS
Replaces OE top hat if worn
COIL SPRING TRIM PACKER OME80PR10
OME661 Recommended fitment
OMETH003
STONE GUARD KIT
STRUT TOP HAT KIT
REAR SWAY BAR OMESTAB6
FRONT SWAY BAR FITTING KIT FK75
NITROCHARGER SPORT 60119
REAR COILS 3067
REAR PART NUMBER QTYUNIT
PRICE $COMMENTS
COILS
SHOCKS
COILS
FRONT COILS 2701
SHOCKS
90024
COMPONENTS
NITROCHARGER SPORT
FRONT SWAY BAR OMESTAB4
ARMOURED APPLICATIONS - 4.5T GVM
TOYOTA LANDCRUISER 200 SERIES - 4.5T GVM
FRONT PART NUMBER QTYUNIT
PRICE $COMMENTS
COILS
FRONT COILS 2978
PART NUMBER QTYUNIT
PRICE $COMMENTSFRONT
COMPONENTS
REAR SWAY BAR OMESTAB8
SHOCKS
FRONT SWAY BAR OMESTAB7
NITROCHARGER SPORT 90025
REAR COILS 3069
COILSREARPART NUMBER QTY
UNIT
PRICE $ COMMENTS
NOTES ON ARMOURED SUSPENSION SELECTION & FITMENT:
SHOCKS
COMPONENTS
NITROCHARGER SPORT 60120
LC200 Armoured Suspension System was designed for and tested on non-KDSS equipped vehicles.
Y62 Armoured Suspension System was designed for and tested on non-HBMC equipped vehicles.
OME661 Lower Shock Stone Guards are recommended fitment for protection against stone damage on LC200.
All fitting kits, components and replacement bushes are included with the above products where required.
The above suspension systems have been designed and tested to suit a vehicle weight range of 3.9 - 4.5T, for vehicle weights
outside this range please contact ARB.
Components have been designed to operate as a complete replacement system, it is not recommended to fit these products
individually.
PAGE 15
-
8/19/2019 Ome Aplication Guide 30 September 2015
16/147
QTYUNIT
PRICE $
1
2
1
2
QTYUNIT
PRICE $
1
2
1
2
REMARKS:
QTYUNIT
PRICE $QTY
UNIT
PRICE $
1 1
2 2
1 1
2 21 1
2 2
QTYUNIT
PRICE $QTY
UNIT
PRICE $
1 1
2 2
1 1
2 2
REMARKS:
51mm
63mm
CHRYSLER JEEP
JEEP COMMANDER XK 2006 TO 2010
FRONT V8 PETROL & DIESELEst imated Lif t : 50mm
PART NUMBER
SPRING: TO 40 KGS 2990
NITROCHARGER *N220 / N190
Standard:
Nivomat:
Tow Pack option uses a Nivomat (self leveling) shock absorber and requires a specific design.
Please note: when replacing Nivomat shocks, you must fit the appropriate OME spring.
To identify whether a vehicle has the standard fitment rear shock or Nivomat shock, the outer body diameter will need to
be measured:
NITROCHARGER *N220 / N190
SPRING: MEDIUM LOAD 2993
No top mounting bushes and dirt shield supplied, re-use OE bushes and dirt shield.
PART NUMBER PART NUMBER
SPRING: MEDIUM LOAD 3074 3074
NITROCHARGER SPORT 60124 60126
STRUT *N219S / N188S
SPRING: 41 TO 100 KGS 2991
90026SPRING: Bar / Winch 3072
STRUT - SPORT 90026
TRIM PACKER FK79
3.2L DIESEL ENGINE
3073
STRUT *N219S / N188S
REAR ALL MODELSEst imated Lif t : 55mm
PART NUMBER
SPRING: LIGHT LOAD 2992
PART NUMBER
ALL MODELS
Est imated Lif t : 50mm
STRUT - SPORT
FK79
90026
FRONT V6 PETROL ENGINEEst imated Lif t : 45mm
PART NUMBER
SPRING: No Bar 3070
STRUT - SPORT 90026
JEEP GRAND CHEROKEE WK2
2011 ON
SPRING: Bar 3059
No top mounting bushes supplied, re-use OE bushes.
NITROCHARGER SPORT 60125 60127
SPRING: CONSTANT 200 KGS 3060 3060
REAR (EXCLUDES TOW PACK OPTION) TOW PACK
3086
90026
90026
3085
1
1
1
1
1
1 1
1
1
1
1 1
1
1
2
2
PAGE 16
-
8/19/2019 Ome Aplication Guide 30 September 2015
17/147
QTYUNIT
PRICE $
1
2
1
2
QTYUNIT
PRICE $
1
2
1
2
REMARKS:
QTYUNIT
PRICE $QTY
UNIT
PRICE $
1 1
1 1
1 -
QTYUNIT
PRICE $
1
1
REMARKS:
REAR
TRIM PACKER OMEWJPF10
OMESTAB1 is a lighter rate OME replacement stabiliser bar which is a recommended fitment so maximum ride
2993SPRING: HEAVY LOAD
NITROCHARGER
2992
REAR
PART NUMBER
OMEWTJPR10
N117
SPRING: HEAVY LOAD
NITROCHARGER SPORT
Est imated Lif t : 40mm
JEEP GRAND CHEROKEE WH / WK TO 2010
FRONT V8 PETROL & DIESEL
OMEWJPF10
ALL MODELS
quality improvement can be obtained. (OMESTAB1 does not suit 2.7 Diesel Models).
N111
2
2
N111NITROCHARGER
N111
-OMESTAB1
PART NUMBER
NITROCHARGER
NITROCHARGER
2945
2944
TRIM PACKER
NITROCHARGER SPORT 60088
SPRING: MEDIUM LOAD
N117
60088
Add 1 only OMEWJPF10 Trim Packer to increase ride height for vehicles with bull bar and winch.
2 2
2
SPRING: 41 TO 90 KGS
NITROCHARGER
2936
NITROCHARGER SPORT 60087 60087
2936
N111
STABILISER BAR
60087 60087
2936
V6 & V8 PETROL ENGINES
SPRING: TO 40 KGS 2935
DIESEL ENGINE
PART NUMBER
JEEP GRAND CHEROKEE WJ WG
NITROCHARGER *N220 / N190
FRONT
2991
NITROCHARGER SPORT
*N220 / N190
ALL MODELS
Est imated Lif t : 55mm PART NUMBER
SPRING: MEDIUM LOAD
Est imated Lif t : 40mm
SPRING: TO 40 KGS 2990
STRUT *N219S / N188S
SPRING: 41 TO 100 KGS
Est imated Lif t : 50mm PART NUMBER
STRUT *N219S / N188S
CHRYSLER JEEP
No top mounting bushes supplied, re-use OE bushes.
2
1
1
2
1
2
2
1
1
1
PAGE 17
-
8/19/2019 Ome Aplication Guide 30 September 2015
18/147
QTYUNIT
PRICE $
1
QTYUNIT
PRICE $
1
2
12
Warning:
QTYUNIT
PRICE $
1
1
REMARKS:
QTYUNIT
PRICE $
1 + 1
1 + 1
1
UCB8
NITROCHARGER SPORT
NITROCHARGER
NITROCHARGER SPORT
OE
NITROCHARGER N362
4OMEU57
U BOLTS
60053
OMEJGF10 front coil packer can be
used for trimming or extra lift
purposes, using no more than 1
packer.
SPRING BUSH KIT
NITROCHARGER SPORT
XJ Models fitted with a 3 bolt engine
exhaust pipe flange, can experience a
clearance problem with the tail shaft,
when suspension is under full
deflection. Fitment of an adjustable
front panhard rod or a change to the
smaller 2 bolt flange will provide the
required clearance.
JEEP CHEROKEE XJ WAGON
1984 ON
FRONT PETROL & DIESEL ENGINES
NITROCHARGER SPORT 60093
XJGK01
EXTRA LEAF D22XL
Fit XJGK01 Gearbox Packer Kit
should a driveline vibration occur.
FRONT 6 CYLINDER & V8 ENGINES
60053
GEARBOX PACKER KIT
OMESD40
Trimming requirement greater than
10mm use A/A fitment. Where near
level rake is desired B/B fitment
should be used. D22XL extra leaf
can be fitted to CS034RA/B and
CS035RA/B for heavier constant load
carrying ability. NB: Models fitted
with OE Up Country SuspensionPack will only be raised by 20mm.
N36
SPRING: MEDIUM LOAD CS035RA / B
OMESD40 will only fit left hand drive
Models.
CENTRE BOLT
N39
2
TRIM PACKER OMEJGF10
2
OMEU60
SPRING:
OMEJGR10
Estim ated Lift: 35 - 45mm PART NUMBER
COIL PACKER
PART NUMBER
1
N35
NITROCHARGER SPORT
JEEP GRAND CHEROKEE ZJ
NITROCHARGER SPORT
CHRYSLER JEEP
N39
REMARKS:
60092
SPRING: 41 TO 90 KGS2930
2931 and 2930 suit 6 cylinder
Models. 2934 suits V8 Models.
When existing stock of N39 is
exhausted no further product will be
available.
OMESD40 will only fit left hand drive
Models.
Estim ated Lift: 20 - 25mm
OMEJGF10
PART NUMBER
1
SPRING: TO 40 KGS
STEERING DAMPER
COIL PACKER
NITROCHARGER
SPRING: MEDIUM LOAD
CS034RA / B
Est imated Lif t : 50mm
2940
REAR
2934
NITROCHARGER
NITROCHARGER SPORT 60092
ALL MODELS
2934
2931
PART NUMBER
SPRING: CONSTANT 100 KGS 2943
OMESD40
60052
STEERING DAMPER
Estim ated Lift: 20 - 25mm
60093
SPRING: LIGHT LOAD
2930
REAR ALL MODELSOMEU60 suits Dana 35 type
differential - Australian Models.
OMEU57 suits AMC 8 1/4 type
differential.
2
2
2
NITROCHARGER
1
1
2
3
5
2
2
4
1
3
1
2
1
2
3
4
5
3
3
3
PAGE 18
-
8/19/2019 Ome Aplication Guide 30 September 2015
19/147
QTYUNIT
PRICE $QTY
UNIT
PRICE $
1 1
1 1
QTYUNIT
PRICE $
1
1
REMARKS:
QTYUNIT
PRICE $QTY
UNIT
PRICE $
1 1
1 1
1 1
QTYUNIT
PRICE $
1
1
REMARKS:
PART NUMBER
JEEP CHEROKEE/LIBERTY KK
2926 2927
NITROCHARGER SPORT
2
2926
2
2
90009
SPRING: TO 50 KGS
SPRING: MEDIUM LOAD
90009
NS131
2947
STRUT
DIESEL ENGINE
60069
SPRING: 51 TO 100 KGS
NS131
2790
STRUT
2STRUT
2925
STRUT
PART NUMBER
STRUT - SPORT
SPRING: CONSTANT 100 KGS
90009
90009
NS130
NITROCHARGER SPORT
NITROCHARGER2
2
2
2
NITROCHARGER
2948
N132
60069
NITROCHARGER
90009STRUT - SPORT
SPRING: LIGHT LOAD
ALL MODELS
STRUT
90009
PART NUMBER
290009
2
90009
SPRING: NO ACCESSORIES
NITROCHARGER
PETROL ENGINE
SPRING: TO 50 KGS
2
Due to varying OE ride heights, some KJ Models may only achieve a 20mm lift.
No top mounting bushes supplied, re-use OE bushes.
When existing stock of NS130 is exhausted no further product will be available.
N132
2NITROCHARGER SPORT
NITROCHARGER SPORT
NS131
2730
N132
2927
2927
SPRING: MEDIUM LOAD
Est imated Lif t : 40mm
REAR
2926
STRUT - SPORT
60069
PART NUMBER
N132
NS131
FRONTEstim ated Lift: 30 - 40mm
NS131
90009
REAR
2
Est imated Lif t : 40mm
STRUT - SPORT
FRONT V6 3.7L PETROL ENGINE 2.8 CRD DIESEL ENGINE
CHRYSLER JEEP
Estim ated Lift: 30 - 40mm PART NUMBER
NS131
SPRING: 51 TO 100 KGS 2927
STRUT - SPORT
PART NUMBER
JEEP CHEROKEE/LIBERTY KJ
NS130
90009
ALL MODELS
60069
2731
NS1312
2790
NS131
Due to varying OE ride heights, some KK Models may only achieve a 20mm lift.
No top mounting bushes supplied, re-use OE bushes.
1
2. 2
2 2
2 2
2
2 2
2
1
1
3 3
33
1
2
PAGE 19
-
8/19/2019 Ome Aplication Guide 30 September 2015
20/147
QTYUNIT
PRICE $
1
1
1
QTYUNIT
PRICE $QTY
UNIT
PRICE $
1 1
1 1
1
1 1
REMARKS:
JWGK03
GEARBOX PACKER KIT
JWGK03
SPRING: SOFT TOP 2941
60048
2942
N67
1
2
TRIM PACKER
PANHARD ROD BRACKET KIT
SPRING: CONSTANT 100 KGS
To achieve optimal vehicle balance front to rear when Rear Spring 2949 is fitted, it is recommended that
When existing stock of N66C is exhausted no further product will be available.
OMEWTJPR10
1
JWGK01
60048
FKWTJ01 Panhard Rod Extension Bracket Kit fitment to right hand drive or FKWTJ02 to left hand drive Models is
JWGK02 suits manual Models from 2003.
-NITROCHARGER
CHRYSLER JEEP
UNLIMITED
6 CYLINDER ENGINE
2932
*N66 / N66C
2 DOOR
N67
PART NUMBER
2
OMESD40
TRIM PACKER
*60047 / 60046
OMEJGF10
PART NUMBEREst imated Lif t : 50mm
STEERING DAMPER
SPRING: 41 TO 80 KGS
2NITROCHARGER
2941
Est imated Lif t : 50mm PART NUMBER
For ride height and trim adjustment use - Front: OMEJGF10 Rear: OMEWTJPR10
FK16
JWGK01
FK16
NITROCHARGER SPORT 60048 60049
NITROCHARGER
BUMPER STOP SPACER KIT
2
2-
N67
NITROCHARGER SPORT
2949
N66
NITROCHARGER N67
SPRING: CONSTANT 200 KGS 2949
600492
FKWTJ01
N67 N67
FKWTJ01
2996
60049NITROCHARGER SPORT
NITROCHARGER SPORT
N672 60049
SPRING: HARD TOP
JWGK02 JWGK02
1FKWTJ02
-
2949
REAR
NITROCHARGER SPORT
NITROCHARGER
NITROCHARGER SPORT
SPRING: TO 40 KGS
*60047 / 60046
JEEP WRANGLER TJ TJ UNLIMITED
FRONT
NITROCHARGER2
2
2933
1
mandatory to ensure correct rear axle tracking.
OMEWTJPR10
FKWTJ02
FK16: Mandatory fitment 20mm Bump Stop Spacer Kit to prevent coil springs becoming solid on full
JWGK01 suits all Models to 2003.
OMESD40 only suitable for fitment to left hand drive Models.
A Gear Box Packer Kit is mandatory fitment to prevent driveline vibration.
JWGK03 suits auto Models from 2003.
only 60047 is fitted to the front.
compression.
1
1
5
4
1
2
3
4
5
1
1
1
2
3
4
2
6
6
6
6
6
6
3
3
3
7
7
PAGE 20
-
8/19/2019 Ome Aplication Guide 30 September 2015
21/147
QTYUNIT
PRICE $
QTYUNIT
PRICE $
1
REMARKS:
JWGK01
D24XL
EXTRA LEAF D23XL
ALL MODELS
SPRING BUSH KIT
60099
NITROCHARGER SPORT
OMESB57
LIGHT LOADCS037R
NITROCHARGER SPORT 60098
60099
60098
GREASABLE SHACKLE KIT
OMESB87
Estim ated Lift: 40 - 50mm
NITROCHARGER SPORT
OMESD40 will only fit left hand drive Models.
GREASABLE SHACKLE KIT OMEGS11
JWGK01 fitment reduces driveline vibration.
Use OMESB57 with original shackles. OMESB87 with OMEGS11 greasable shackles.
2
SPRING: TO 95 KGS: 40mm
MEDIUM LOAD TO 200 KGS
N33
SPRING BUSH KITOMESB57
SPRING: SOFT TOP
NITROCHARGER SPORT
OMESB872
OMEGS11
PART NUMBER
CENTRE BOLT UCB09
NITROCHARGER N33
2
1
2
2
SPRING: TO 35 KGS: 50mm
JEEP WRANGLER YJ 1986 - 1996
SPRING: HARD TOP
PART NUMBER
REAR
CS036R
Est imated Lif t : 50mm
CS014F
STEERING DAMPER OMESD40
GEAR BOX PACKER KIT
NITROCHARGER
CHRYSLER JEEP
EXTRA LEAF
CENTRE BOLT UCB092
2
2
PETROL ENGINEFRONT
CS014F
2
1
3
2
1
2
3
2
2
PAGE 21
-
8/19/2019 Ome Aplication Guide 30 September 2015
22/147
QTYUNIT
PRICE $QTY
UNIT
PRICE $
1 1
1 1
QTYUNIT
PRICE $
1
1
QTYUNIT
PRICE $QTY
UNIT
PRICE $
1 1
1 1
REMARKS:
Est imated Lif t : 100mm
4" COMPLETE LIFT KIT OMEJK4RHDD OMEJK4D
DIESEL ENGINE RHD MODELS DIESEL ENGINE LHD MODELS
FK53 Caster Kit will increase caster angle by 2o. Check manufacturer's specification if Caster Kit is required.
at full droop. When fitting larger than original diameter tyres, it is a requirement to fit aftermarket wheels (rims) that
have a greater offset (less backspacing) to ensure that sufficient clearance is given between the tyre to sway bar, sway
bar links and control arms.
2012 Models with 3.6L engine will require exhaust or driveshaft modification to avoid contact of driveshaft and exhaust
CHRYSLER JEEP
FK53
STEERING STABILIZER MOUNT KIT - LEFT
HAND DRIVEFK50
PART NUMBER
FK53
PETROL ENGINE LHD
MODELS
For trim adjustment use - Front: OMEJKPF10 Rear: OMEJKPR10. Do not fit more than 1 packer per coil spring.
2
SPRING: MEDIUM LOAD
FK37
FK50 is a mandatory fitment for 2006 To 2008 Models when fitting OMESD48. Left hand drive only.
260066
Est imated Lif t : 100mm
4" COMPLETE LIFT KIT
the panhard rod to its original position.
Fitment of Panhard Rod Extension Bracket Kit is not mandatory, but fitment will improve the ride feel by locating
Kit includes: 2 x Front Shocks, 2 x Rear Shocks, 1 x (pair) Front Coils, 1 x (pair) Rear Coils, 1 x Steering Damper, 1 x
Front Forged Panhard, 1 x Bump Stop Kit, 1 x Brake Line Relocation Kit, 1 x Rear Panhard Bracket Kit, 1 x Sway Bar
Link Dis-connect Kit, 1 x Caster & Driveline Kit, 1 x Steering Damper Relocation Kit for LHD Models (not applicable for
RHD Models), 2 x Front Trim Packer, 2 x Rear Trim Packer, 1 x Display Carton.
See Page 24 for kit breakdown.
2628SPRING: BAR AND WINCH 2627
2NITROCHARGER
OMESD48
RIGHT HAND DRIVEFK39
ALL MODELS
PANHARD ROD EXTENSION BKT KIT -
2630
NITROCHARGER SPORT 60067
2617
OMEJKPF10
REAR
1
60066N196
SPRING: CONSTANT 150 KGS
NITROCHARGER SPORT
OMEJKPF10
JEEP WRANGLER JK 2 DOOR 2006 ON
FRONT V6 PETROL ENGINE
2616
SPRING: NO BAR 2626
PART NUMBER
2.8 DIESEL ENGINE
PART NUMBEREst imated Lif t : 50 mm
2627
SPRING: BAR 26151 1
1 1
NITROCHARGER N196
TRIM PACKER
STEERING DAMPER OMESD48
LEFT HAND DRIVE
TRIM PACKER
SUSPENSIONKIT
PART NUMBER
OMEJK4RHD
PETROL ENGINE RHD
MODELS
OMEJK4
PANHARD ROD EXTENSION BKT KIT -
OMEJKPR10
FK50
N198
Est imated Lif t : 50mm
CASTER CORRECTION KIT
PART NUMBER
1
1
1
11
1
2
2
1 1
3 3
3 3
4
5
4
5
1
2
3
4
6 6
6
5
4
5
4
5
PAGE 22
-
8/19/2019 Ome Aplication Guide 30 September 2015
23/147
QTYUNIT
PRICE $QTY
UNIT
PRICE $
1 1
1 1
QTYUNIT
PRICE $
1
QTY
UNIT
PRICE $ QTY
UNIT
PRICE $
1 1
1 1
REMARKS:
Est imated Lif t : 100mm DIESEL ENGINE RHD MODELS DIESEL ENGINE LHD MODELS
4" COMPLETE LIFT KIT OMEJK4RHDD OMEJK4D
Est imated Lif t : 100mm
RIGHT HAND DRIVE
SPRING: MEDIUM LOAD 2617
NITROCHARGER N198
SUSPENSION PETROL ENGINE RHDMODELSKIT
JEEP WRANGLER JK UNLIMITED 2006 ON
TRIM PACKER
2012 Models with 3.6L engine will require exhaust or driveshaft modification to avoid contact of driveshaft and exhaust
at full droop. When fitting larger than original diameter tyres, it is a requirement to fit aftermarket wheels (rims) that
have a greater offset (less backspacing) to ensure that sufficient clearance is given between the tyre to sway bar, sway
bar links and control arms.
PART NUMBER PART NUMBER
4" COMPLETE LIFT KIT OMEJK4RHD OMEJK4
For trim adjustment use - Front: OMEJKPF10 Rear: OMEJKPR10
FK50 is a mandatory fitment for 2006 To 2008 Models when fitting OMESD48. Left hand drive only.
the panhard rod to its original position.
Fitment of Panhard Rod Extension Bracket Kit is not mandatory, but fitment will improve the ride feel by locating
Do not fit more than 1 packer per coil spring.
PETROL ENGINE LHD
MODELS
60066N196
OMEJKPF10
FK50
FK53
FK37
OMEJKPR10
NITROCHARGER SPORT
V6 PETROL ENGINE
2629SPRING: BAR AND WINCH
PART NUMBER
SPRING: NO BAR
FRONT
STEERING DAMPER
2619
OMESD48
2627
2.8 DIESEL ENGINE
Est imated Lif t : 50 mm PART NUMBER
SPRING: BAR 26161 1
1 1
60067
TRIM PACKER OMEJKPF10
REAR ALL MODELS
2620
PANHARD ROD EXTENSION BKT KIT -
2618
2NITROCHARGER SPORT
FK53 Caster Kit will increase caster angel by 2o. Check manufacturer's specification if Caster Kit is required.
N196
60066NITROCHARGER
2628
2628
PANHARD ROD EXTENSION BKT KIT -
1
OMESD48
Kit includes: 2 x Front Shocks, 2 x Rear Shocks, 1 x (pair) Front Coils, 1 x (pair) Rear Coils, 1 x Steering Damper, 1 x
Front Forged Panhard, 1 x Bump Stop Kit, 1 x Brake Line Relocation Kit, 1 x Rear Panhard Bracket Kit, 1 x Sway Bar
Link Dis-connect Kit, 1 x Caster & Driveline Kit, 1 x Steering Damper Relocation Kit for LHD Models (not applicable for
RHD Models), 2 x Front Trim Packer, 2 x Rear Trim Packer, 1 x Display Carton.
See page 24 for kit breakdown.
STEERING STABILIZER MOUNT KIT - LEFT
HAND DRIVEFK50
Est imated Lif t : 50mm PART NUMBER
SPRING: CONSTANT 300KGS
CASTER CORRECTION KIT FK53
2
CHRYSLER JEEP
2
1
LEFT HAND DRIVE
FK39
SPRING: CONSTANT 150KGS
1
1
1
1
1
1
1
1
2
2
1 1
1
3 3
3 3
3
2
4
5
4
5
4
6 6
5
4
5
4
5
6
PAGE 23
-
8/19/2019 Ome Aplication Guide 30 September 2015
24/147
QTYUNIT
PRICE $
1
1
1
1
1
1
2
2
2
2
1
1
1
1
1
1
2
1 Forged
1
10mm
1
1
2
2
1
2
2012 Models with 3.6L engine will require exhaust or driveshaft modification to avoid contact of driveshaft and exhaust at full
droop.
BP-51 SELECTION
SHOCK: JEEP 4+ FRONT 633
SHOCK: JEEP 4+ FRONT 683
KIT: JEEP 4+ FRONT
BP5160021
BP5160022
VM80010014
Longer Travel Front Shock
For OMEJK4 Kits
BP-51 SELECTION
SHOCK: JEEP 4+ REAR 685
KIT: JEEP 4+ REAR
BP5160023
VM80010015
any future misunderstanding.
FK47 LHD, suits 100mm liftREAR PANHARD BRACKET KIT 1
FK47RHD RHD, suits 100mm lift
Notification: Modifications for off - road use only
The products listed in this selection chart are deemed by Old Man Emu to be suitable for off road use and their legality for
public road use should be certified by the relevant Registration Authority. An Off Road Use Only Disclaimer must be signed by
the customer.
REAR SWAY BAR LINK 3460011 Link only, suits 100mm lift
TRIM PACKER OMEJKPR10
The fitter selling these shocks must inform the customer there is no warranty due to the severe nature of competition
racing. The fitter must also note on the customer's receipt "racing application no warranty applies". This will prevent
Modifications and replacement of other associated components will be required.
Lift increase is approximate and wil l depend on vehicle weights .
Warranty Implications
SHOCKS
NITROCHARGER SPORT - LONG 60067L
COMPONENTS
COILS
100mm LIFT - MEDIUM 2643
100mm LIFT - CONSTANT 300KG 3046
REAR PART NUMBER QTYUNIT
PRICE $COMMENTS
BRAKELINE RELOCATION KIT (F&R) FK46
TRIM PACKER OMEJKPF10
SWAY BAR LINK DIS-CONNECT KIT (F&R) FK48 Suits 100mm lift
FRONT SWAY BAR LINK 3460010 Link only, suits 100mm lift
ADJUSTABLE FRONT PANHARD ROD PANRJK001
BUMP STOP EXTENSION KIT (F&R) FK40
100mm LIFT - PETROL 2642
100mm LIFT - DIESEL 3047
CASTER KIT FK53 Front caster only, increases caster by 2o
CASTER & DRIVELINE KIT FK49 Adjust front caster and rear pinion angle
STEERING DAMPER
STABILISER OMESD48
COMPONENTS
OFF ROAD USE ONLY - CHRYSLER
JEEP WRANGLER JK
COMPLETE KIT PART NUMBER COMMENTS100mm (4 Inch) LIFT KIT OMEJK4RHD
When fitting larger than original diameter tyres, it is a requirement to fit aftermarket wheels (rims) that have a greater offset
(less backspacing) to ensure that sufficient clearance is given between the tyre to sway bar, sway bar links and control arms.
KIT INCLUDES:
2 x Front Shocks, 2 x Rear Shocks, 1 x (pair) Front Coils, 1 x (pair) Rear Coils, 1 x Steering Damper, 1 x Front ForgedPanhard, 1 x Bump Stop Kit, 1 x Brakeline Relocation Kit, 1 x Rear Panhard Bracket Kit, 1 x Sway Bar Link Dis-Connect Kit, 1
x Caster & Driveline Kit, 2 x Front Trim Packer, 2 x Rear Trim Packer, 1 x Display Carton.
FRONT
100mm (4 Inch) LIFT KIT OMEJK4
PETROL ENGINE RHD MODELS
PART NUMBER QTYUNIT
PRICE $COMMENTS
PETROL ENGINE LHD MODELS
100mm (4 Inch) LIFT KIT OMEJK4RHDD DIESEL ENGINE RHD MODELS
100mm (4 Inch) LIFT KIT OMEJK4D DIESEL ENGINE LHD MODELS
SHOCKS
NITROCHARGER SPORT - MID LENGTH 60066M
NITROCHARGER SPORT - LONG 60066L
COILS
PAGE 24
-
8/19/2019 Ome Aplication Guide 30 September 2015
25/147
QTYUNIT
PRICE $
1
2
1
2
1
2
1
2
QTYUNIT
PRICE $
1
1
2
REMARKS:
FORD
RANGER PX 2011 ON
FRONT DIESEL ENGINEEst imated Lif t : 50mm
PART NUMBER
90020
TRIM PACKER FK56
SPRING: Bar / Winch
90019STRUT SPORT
3048
STRUT SPORT
2999
SPRING: No Bar: 30mm LIFT
2997SPRING: No Bar
*90020 / 90019
90019STRUT SPORT
NITROCHARGER SPORT
Est imated Lif t : 50mm REARALL MODELS
NITROCHARGER SPORT *60101 / 60023
EL068R
*60102 / 60101
PART NUMBER
EL049RSPRING: MEDIUM LOAD
SPRING: CONSTANT 300 KGS
2
2
STRUT TOP HAT KIT OMETH006
1
STRUT SPORT
2998SPRING: Bar
BP51 SELECTION
BP-51 COIL OVER FRONT RH
BP-51 COIL OVER FRONT LH
BP FIT KIT FRONT
BP5190005R
BP5190005L
VM80010011
OME3135UPPER STRUT BUSHES
2
Use OMEU66A when fitting EL068R and EL069R.
SPRING: CONSTANT 600 KGS
OMEGS20
EXTRA LEAF
U BOLTS
EL34XL will give approximately 30mm extra lift or increase loading capacity at design height by approximately 300kg.
BP-51 SELECTION
BP-51 SHOCK REAR RH
BP-51 SHOCK REAR LH
BP FIT KIT REAR
BP5160004R
BP5160004L
VM80010012
EL069R
60102
EL34XL
OMEU66
OMEU66B
NITROCHARGER SPORT
OMEU66A
2
FK57
Fitment of Driveline Spacer Kit FK57 is recommended to re-align driveline.
1
OMESB103
DRIVELINE SPACER KIT
SPRING BUSH KIT
GREASABLE SHACKLE KIT
OMESB102
4
No top mounting bushes supplied, use OME3135. OE bushes may be re-used if in good condition.
Use OMEU66 when fitting EL049R.
Trim Packer FK56 provides 10mm lift at the wheel.
OMESB102 suits OE Shackle.
OMESB103 Bush Kit suits OME Greasable Shackle OMEGS20.
Use OMEU66B when fitting EL069R with EL34XL.
Strut Top Hat Kit may be required if original equipment is worn.
1
2
1
1
3
4
4
5
6
1
4
4
4
6
5
4
2
1
3
1
7
7
PAGE 25
-
8/19/2019 Ome Aplication Guide 30 September 2015
26/147
QTYUNIT
PRICE $
1
QTYUNIT
PRICE $
1
QTYUNIT
PRICE $
1
1
REMARKS:
QTYUNIT
PRICE $
4
1
2
2
2
1
2
2
2
2
2
D34XL and UCB19 suits CS056R and
CS060R.
EL34XL suits EL049R.
SPRING BUSH KIT
60023
COURIER/RANGER 1 TONNE
D34XL / EL34XL
SPRING BUSH KIT
PART NUMBEREst imated Lif t : 20mm
OMEU65
NITROCHARGER SPORT 60022
When remaing stock of N51 is
exhausted no further product will be
available.
FK22 Support Brackets must be
installed to upper front shock
mounting brackets on late 1996 On
Models manufactured in Thailand.
ALL MODELS
SPRING: MEDIUM LOAD
60023NITROCHARGER SPORT
FITTING KIT
SPRING: CONSTANT 200 KGS
NITROCHARGER SPORT
CS027R Include tray weight in constant loadcalculation.
REAR
2
UCB19
FRONT
UCB17
OMESB82
U BOLTS
EXTRA LEAF D9XL
CENTRE BOLT
GREASABLE SHACKLE KIT OMEGS18
TORSION BARS: OVER 60 KGS
NITROCHARGER SPORT
303005
REAR
FK22 Front Shock Absorber Upper
Mount Support Bracket Kit is a
mandatory fitment.
Include tray weight in constant load
calculation.
Use OMEU66 when fitting CS056R and
EL049R. Use OMEU66A when fitting
CS060R.
*N194 / N187
FK22FITTING KIT
GREASABLE SHACKLE KIT OMEGS18
SPRING: CONSTANT 200 KGS EL049R
CS060R
For Models with 2.5TD engine measure
length of Torsion Bar to determine correct
fitment.
When remaining stock of N187 is
exhausted no further product will be
available.
NITROCHARGER SPORT
NITROCHARGER SPORT
4
SPRING: CONSTANT 400 KGS
303013 - 1024mm.*60102 / 60023
U BOLTSOMEU66A
303013
PART NUMBER
CS056R
2
PART NUMBER
PETROL & DIESEL ENGINES
60023
Note: Some South American Models,
built in Argentina, use torsion bars with
hexagonal ends. Above OME
suspension is not suitable for these
Models.
PART NUMBER
303005
CS026R
2N51
1985 - 2005 ALL MODELS (NOT USA MANUFACTURED MODEL)
FK22
NITROCHARGER
TORSION BARS: OVER 60 KGS
OMESB97
PETROL & DIESEL ENGINES
60023
Est imated Lif t : 20mm
EXTRA LEAF
60022
FORD
CENTRE BOLT
OMEU66
RANGER PJ/PK 12/2006 TO 2011 ALL MODELS
REMARKS:
(NOT USA MANUFACTURED MODEL)
FRONT
NITROCHARGER SPORT
NITROCHARGER
ALL MODELS
SPRING: MEDIUM LOAD
303005 - 925mm.
TORSION BARS
1
1
1
2
1
3
2
2
4
3
1
2
15
3
3
6
2 3 6
2 3 6
6
6
5
4
3
2
PAGE 26
-
8/19/2019 Ome Aplication Guide 30 September 2015
27/147
REMARKS:
QTYUNIT
PRICE $
2
QTYUNIT
PRICE $
REMARKS:
QTYUNIT
PRICE $
1
2
1
QTYUNIT
PRICE $
1
2
1
2
QTYUNIT
PRICE $
2
2 + 2
2
2
FORD EXPLORER 1996 - 2001 REAR LEAF SPRING MODELS
Fitment of a FK81 Caster Correction
Kit will provide approximately 3.5 to
4.0 degrees of extra caster. It is
advisable to have a front end
alignment carried out to determine if a
FK81 kit is required.
2
FRONT
FORD
NITROCHARGER SPORT 60121
When fitting either 3075 or 3076 it is
mandatory to fit Bump Spacer Kit
FK73 to prevent the coil from being
over stressed.
OE spring bushes are required to fit
CS042R springs. D10XL extra leaf
should be fitted when a constant
200kg plus load is carried.
NITROCHARGER
SPRING: MEDIUM LOAD
NITROCHARGER
CENTRE BOLT UCB5
When bull bar and / or winch are fitted
use FK74 on both coils to restore
nominal lift height.
Where the OE rear leaf spring has an
overload leaf fitted, this overload leaf
is to be fitted to the OME leaf, EL077R
is to have its centre bolt replaced with
a longer bolt UCB21 and OE spacer
blocks are to be reused.
PART NUMBER
SPRING: 45MM
FRONT
60123
FORD F250 & F350 2011 ON
2
Raise or lower front end clearance
and trim vehicle by adjusting front
torsion bars. Important: A minimum
of 60mm of droop must be
maintained.
Est imated Lif t : 40mm
EXTRA LEAF
OME front shock 60121 is not suitable
as an OE replacement. When fitting
our longer OME shock 60121 you
must fit:
2
REAR
N16
V6 PETROL ENGINE
N17
REAR ALL MODELS
TORSION BARS
2768
NITROCHARGER SPORT
PART NUMBER
D10XL
CS042R
PART NUMBER
-
PART NUMBER
- FK70 Radius Arm Drop Bracket Kit,
if not fitted you may over stretch the
front brakelines
Use OMEU77 when fitting to a vehiclewithout an overload leaf.
TRIM PACKET (10mm)
SPRING: 100MM 3076
FRONT
- FK72 Swaybar Kit to lower the front
swaybar
NITROCHARGER SPORT60121
DIESEL ENGINE
Est imated Lif t : 45mm
(2 inch )
SPRING: 75MM 3075 - FK71 Brakeline Kit to extend / drop
the brakelines
CENTRE BOLT- OVERLOAD ONLY UCB21
SPRING: MEDIUM LOAD EL077R
SPRING: CONSTANT 450 KGS EL077R + EL40XL
SPRING BUSH KIT OMESB109
U BOLTS - NO OVERLOAD LEAF OMEU77
EXTRA LEAF EL40XL
NITROCHARGER SPORT 60122
Use OMEU78 when fitting to a vehicle
with an overload leaf.
CASTER CORRECTION KIT FK81
FK74
1
4U BOLTS - WITH OVERLOAD LEAF OMEU78
BUMP SPACER KIT FK73
PANHARD BRACKET FK69
RADIUS ARM DROP BRACKET KIT FK70
BRAKELINE BRACKET KIT FK71
SWAYBAR BRACKET KIT FK72
Est imated Lif t : 75mm
(3 inch ) PART NUMBER
DIESEL ENGINE
Estim ated Lift: 75 - 100mm
(3 inch to 4 inch)
2
1
1
2
2
1
3
4
5
4
1
2
3
4
5
6
2
1
6
PAGE 27
-
8/19/2019 Ome Aplication Guide 30 September 2015
28/147
QTYUNIT
PRICE $
1
2
1
QTYUNIT
PRICE $
1
2
1
2
QTYUNIT
PRICE $
2
2 + 2
2
2
REMARKS:
Use OMEU80 when fitting to a vehicle with an overload leaf.
When fitting either 3075 or 3076 it is mandatory to fit Bump Spacer Kit FK73 to prevent the coil from being over stressed.
OME front shock 60121 is not suitable as an OE replacement. When fitting our longer OME shock 60121 you must fit:
- FK71 Brakeline Kit to extend / drop the brakelines
U BOLTS - WITH OVERLOAD LEAF
SPRING BUSH KIT OMESB109
U BOLTS - NO OVERLOAD LEAF OMEU79
SPRING: MEDIUM LOAD
FK69
SPRING: 100MM
60122
SPRING: CONSTANT 450 KGS EL077R + EL40XL
BRAKELINE BRACKET KIT
PART NUMBER
SPRING: 75MM
PART NUMBER
SPRING: 45MM 2768
FK71
SWAYBAR BRACKET KIT FK72
60123
CASTER CORRECTION KIT FK81
EL077R
NITROCHARGER SPORT
TRIM PACKET (10mm)
PART NUMBER
FK74
REAR ALL MODELSEst imated Lif t : 75mm
(3 inch )
- FK72 Swaybar Kit to lower the front swaybar
- FK80 Radius Arm Drop Bracket Kit, if not fitted you may over stretch the front brakelines
When bull bar and / or winch are fitted use FK74 on both coils to restore nominal lift height.
Where the OE rear leaf spring has an overload leaf fitted, this overload leaf is to be fitted to the OME leaf, EL077R is to
have its centre bolt replaced with a longer bolt UCB21 and OE spacer blocks are to be reused.
Use OMEU79 when fitting to a vehicle without an overload leaf.
BUMP SPACER KIT FK73
FRONT DIESEL ENGINEEst imated Lif t : 45mm
(2 inch )
NITROCHARGER SPORT
NITROCHARGER SPORT
3076
1
FORD
Fitment of a FK81 Caster Correction Kit will provide approximately 3.5 to 4.0 degrees of extra caster. It is advisable tohave a front end alignment carried out to determine if a FK81 kit is required.
60121
EXTRA LEAF EL40XL2
RADIUS ARM DROP BRACKET KIT FK80
PANHARD BRACKET
CENTRE BOLT UCB21
OMEU804
FORD F250 & F350 2008 - 2010
FRONT DIESEL ENGINEEstim ated Lift: 75 - 100mm
(3 inch to 4 inch)
3075
NITR