olipes off-highway equipment 2015 en
TRANSCRIPT
Motor oil for diesel engines that exceeds EPA standards (American). Based on API CH-4
Motor oil for diesel engines that exceeds EPA standards (American). Based on API CI-4
Motor oil for diesel engines with Particulate Filter that exceeds EPA standards (American).Based on API CJ-4
CAT ECF-1-a CAT ECF-1-a CAT ECF-1-a
CES 20076 CES 20076 CES 20076
CES 20077 CES 20077 CES 20077
CES 20078 CES 20078 CES 20078
CES 20081
CAT ECF-2 CAT ECF-2 CAT ECF-2
CAT ECF-3
AVEROIL GLOBAL10W40/15W30/15W40
AVEROIL FAP 15W40
AVEROIL UHP 5W30/10W40CATERPILLAR
Motor oil for diesel engines that exceeds EPA emission standards (American).Based on API CH-4
Motor oil for diesel engines that exceeds Euro 3 emission standards. Based on ACEA E5
Motor oil for diesel engines that exceeds EPA emission standards (American).Based on API CI-4
Motor oil for diesel engines with Particulate Filter. Based on API CJ-4
AVEROIL GLOBAL 10W40, GLOBAL 15W40 and AVEROIL FAP 15W40 exceed Cummins CES 20071/20072/20075 specifications.AVEROIL TIR 15W40 exceeds Cummins CES 20072 specification. MAXICER TDI 15W40 exceeds Cummins CES 20075 specification.
CUMMINS
EngineOils
228.1
228.3
228.1
228.3
228.31
228.1
228.3
228.5
228.51
Industrial diesel engines, similar to the ACEA E2.Up to 45.000 km
Industrial diesel engines, similar to the ACEA E3.Up to 60.000 km
BR 600 diesel engines with Particulate Filter (DPF).Up to 60.000 km
Industrial diesel engines, similar to the ACEA E4.Up to 90.000 km. Actros: up to 120.000 km or 160.000 with a centrifuge filter.
Industrial diesel engines with Particulate Filter, similar to the ACEA E6. Up to 120.000 km
MERCEDES-BENZ
AVEROIL GLOBAL, AVEROIL FAP and AVEROIL UHP exceed DAF, IVECO, MACK, MAN, RENAULT TRUCKS and SCANIA specifications among other manufacturers.
VDS
VDS 2
VDS 3
VDS
VDS 2
VDS 3
VDS 4
VDS
VDS 2
VDS 3
The latest technologies applied to the world of heavy machinery make it increasingly difficult to choose the right lubricant for the different greasing points.
This is why OLIPES has developed this catalogue/handbook for the workshop and for the professional. A catalogue designed for use as a quick lubrication guide, enabling you to choose the most suitable lubricant in each case and providing the mechanic with the technical arguments he needs to advise his client.
The main European and US Heavy Machinery manufacturers have come up with their own specifications for a new generation of lubricants which entail certain requirements in terms of testing on the engines, transmission hydraulic systems, differentials and final tappets manufactured by them. On these pages we will show the manufacturers’ specifications and the recommended lubricants for each model in simple tables which are easy to follow.
Motor oil for Euro 1 and previous industrial diesel engines.Based on CCMC D2 and API CD. Up to 30.000 km
Motor oil for Euro 2 industrial diesel engines.Based on CCMC D4 and API CE. Up to 45.000 km
Motor oil for Euro 3 industrial diesel engines.Based on ACEA E5 and API CH-4. Up to 60.000 km
Motor oil for Euro 4 industrial diesel engines with Particulate Filter. Based on ACEA E9 and API CJ-4. Up to 100.000 km
VOLVOAVEROIL GLOBAL
10W40/15W30/15W40AVEROIL FAP
15W40AVEROIL UHP 5W30/10W40
CI-4(CI-4 Plus)
CG-4
CF-4)
CG-4
CF(CF-4)
E7
AVEROIL TIR 15W40
AVEROIL GLOBAL 10W40/15W30/15W40*
Introduced in 2006. For high-speed, four-stroke engines designed to meet USA 2007 on-highway exhaust emission standards. It admits diesel fuels ranging in sulfur content up to 0.05%. However sulfur content may impact oil drain interval. Low SAPS oils are effective at sustaining emission control system durability where particulate filters (DPF or FAP) and other advanced after-treatment systems are used.
Introduced in 2002. For high-speed, four-stroke engines, included EGR engines, designed to meet USA 2002 exhaust emission standards. It admits diesel fuels ranging in sulfur content up to 0.5%. (Also variation viscosity control).
Introduced in 1995. For severe duty, high-speed, four-stroke engines using fuel with less than 0.5% sulfur content.
Introduced in 1994. For off-road, indirect-injection diesel engines including those using fuel with over 0.5% sulfur content.
Engine
API Diesel (Commercial)
For high-performance engines under heavy-duty conditions, with EGR and/or SCR, and long-drain oil interval.
For high-performance engines under heavy-duty conditions, with EGR and/or SCR.
For high-performance engines under heavy-duty conditions, with EGR and long-drain oil interval. Low SAPS for Particulate Filters (DPF), requires fuel with low sulfur content.
For high-performance engines under heavy-duty conditions, with EGR. Low SAPS for Particulate Filters (DPF), requires fuel with low sulfur content.
* Exceed API CH-4
ACEA - 08
Oils-Diesel
AVEROIL UHP 5W30/10W40
AVEROIL FAP 15W40
The alternative we offer is the evolution
CJ-4
CI-4CI-4(CI-4 Plus)
E4
E6
E9
E7 E7
The main European, US and Asian Engine manufacturers have established their own specifications for a new generation of engine lubricants which, although they comply with API and ACEA, entail certain requirements in terms of testing the engines manufactured by them, particularly after incorporating the exhaust gas post-treatment systems: Particulate Filters (DPF or FAP), EGR Valves and Urea Catalytic Converters (SCR).
OLIPES engine lubricants are designed to comply with EPA North American and the European Euro IV, Euro V and future Euro VI standards regarding the reduction of smoke emission, ensuring maximum engine protection even under the most extreme conditions.
OLIPES recommends following the engine manufacturer’s instructions as regards the viscosity grades (in line with the atmospheric temperature) and the quality levels.
UHPD10W-40 100% Group III 10W-40
5W-30 100% Group III
UHPD Low SAPSE6/228.51/3477E4/228.5/3277
SHPD15W-40 Group I10W-40 15W-30 Gr. I +30% Gr. III
15W-40 100% Group IISHPD Low SAPSE9/CJ-4/228.31E7/CI-4/228.3/3275
Extended drain oil interval
Standard drain oil interval
Equipped with SCR
UHPD and SHPD Euro 5 Profiles
Equipped with DPF
}
}
120000
100000
80000
60000
40000
20000
02008
The Euro 5 standard came into force on Sep.-01- 09 for the approval of vehicles, and from Jan.-01-11 for the registration and sale of new types of cars;The Euro 6 standard will come into force on Sep.-01-14 for the approval of vehicles, and from Sep.-01-15 for the registration and sale of new types of cars;
2009 2010 2011 2012
Diesel Engines – Period: 2008-2012Evolution of the Motor Oil Market in the EU
Euro 4
E2, E3, E5E4E6E7E9
ACEA
Euro 5
Oil
Volu
me
(Met
ric To
ns)
API S
ERVICE SM/CF
EN
ERGY CONSERVING
SAE5W - 30
AVEROIL GLOBAL 10W40/15W30/15W40
AVEROIL FAP 15W40
LoadersLubricants
Backhoe Loaders
Engineand
BOBCATCompact Loaders: S70 to S650, 4-wheel drive: A300, Compact Tracked: T110 to T650 and their variants H, Articulated: AL275 to AL440 and MTL (MT50 to MT55).Recommended viscosity from -25ºC to +30ºC: 15W30
Valid for all models from 2004 for long oil change intervals (500-600 hours, maximum 12 months),
especially in engines with Diesel Particulate Filter (DPF or FAP).
Wheel Loaders: FR Serie, Crawler Loaders: FL Serie.Recommended viscosity from -18ºC to +30ºC: 15W30
Valid for all models from 2004 for long oil change intervals (500-600 hours, maximum 12 months),
especially in engines with Diesel Particulate Filter (DPF or FAP).
Wheel Loaders: DL 160 to 500, DL 200TC, DL 250TC, DL250 High Lift and all of the Mega series. DOOSAN DAEWOO
FIAT ALLIS
Wheel Loaders: FB, FL, FR, FW, W and W-H Series.Recommended viscosity from -20ºC to +30ºC: 15W30FIAT KOBELCO-HITACHI
Valid for all models from 2004 for long oil change intervals (500-600 hours, maximum 12 months),
especially in engines with Diesel Particulate Filter (DPF or FAP).
Wheel Loaders: 403, 406, 409, 411HT, 416HT, 426HT, 426ZX, 426eHT, 436HT, 436WasteMaster, 436 ZX, 456HT,
456WasteMaster, 456ZX and TM310WasteMaster.Backhoe Loaders: 1CX, 2CX, 3CX, 3CX 2010, 4CX, Midi CX and their variants Sitemaster and Super.
Recommended viscosity from -15ºC to +30ºC: 15W30
JCB
Valid for all models from 2004 for long oil change intervals (500-600 hours, maximum 12 months),
especially in engines with Diesel Particulate Filter (DPF or FAP).
Wheel Loaders: HL730-7A to HL780-7A and their variants TM and XTD.
Recommended viscosity from -25ºC to +30ºC: 15W30HYUNDAI
Valid for all models from 2004 for long oil change intervals (500-600 hours, maximum 12 months),
especially in engines with Diesel Particulate Filter (DPF or FAP).
Compact Loaders: 410 to 465, front: W20E, 721E, 821E, 921E, 521D, 621D.
Backhoe Loaders: 580M and Super M, and generally on all loaders and backhoe loaders.
CASE
Compact Loaders: 216B to 242B (series 2) and 246C to 272C (XPS), Compact all terrain: 247B to 257B (series 2)
and 277C to 297C (XPS). Compact Wheel Loaders: 906H, 907H, 908H, 914G and IT14G; small: 924H, 924Hz, 928Hz and 930H; medium: 938H, 950H, 962H, 966H, 972H, 980H, IT38H and IT62H;
large: 988H, 990H, 992G, 992K, 993K and 994F. Backhoe Loaders: 422E, 428E, 432E, 434E (Mechanical
and Pilot), 442E and 444E.
CATERPILLAR
Caterpillar recommends quality levels: API CJ-4 (CAT ECF-3) for engines with Diesel
Particulate Filters (DPF or FAP);
API CH-4 (CAT ECF-1-α) and API CI-4 (CAT ECF-2) to avoid reducing the engine working life.
API CF-4 is not suitable for Caterpillar diesel engines.
Oil change interval: Maximum 3 months or 500 hours.
New Holland recommends for its engines quality levels equal to or greater than:
API CI-4, CH-4/SL, ACEA E7, NWH 330H or NWH 330G.Oil change interval: maximum 500 hours.
New Holland recommends for its engines quality levels equal to or greater than:
API CI-4, CH-4/SL, ACEA E7, NWH 330H or NWH 330G.Oil change interval: maximum 500 hours.
AVEROIL GLOBAL 10W40/15W30/15W40
AVEROIL FAP 15W40
Valid for all models from 2004 for long oil change intervals (500-600 hours, maximum 12 months),
especially in engines with Diesel Particulate Filter (DPF or FAP).
Wheel Loaders: W110B, W130B, W170B, W190B, W230, W270B and their Evolution variants.
Backhoe Loaders: B90B, B100B, B110B, B115B and generally for all the backhoe loaders and loaders
with wheels.
NEW HOLLAND
Valid for all models from 2004 for long oil change intervals (500-600 hours, maximum 12 months),
especially in engines with Diesel Particulate Filter (DPF or FAP).
Wheel Loaders: L10, L10.5, L15 B, L15 PZ B, L18, L20, L20 B, L20i, L25, L25.5, L35 B, L4, L40, L45, L45B, L45C, L5 C,
L5.5, L6 F, L6.5, L8.5, L7, L9 and from MF11 to MF88 models.
ORENSTEIN & KOPPEL
Valid for all models from 2004 for long oil change intervals (500-600 hours, maximum 12 months),
especially in engines with Diesel Particulate Filter (DPF or FAP).
Wheel Loaders: TL160 to TL450.Compact Wheel Loaders: TL65, TL60S, TL80, TL80AS,
TL100 and TL120.Backhoe Loaders: 820, 860, 860 SX, 860 Elite, 880 Elite,
880 SX, 970 Elite and 980 LT.
TEREX
Valid for all models from 2004 for long oil change intervals (500-600 hours, maximum 12 months),
especially in engines with Diesel Particulate Filter (DPF or FAP).
For its Euro 3 engines, Volvo requires quality levels E5/CH-4+VDS3 and E9/CJ-4+VDS4 for Euro 4 and Euro 5
engines with Particulate Filter (DPF or FAP)
Wheel Loaders: L60F, L70F, L90F, L110F, L120F, L150F, L180F, L180F High Lift, L220F and L350F.
Wheel Compact Loaders: L20B, L25B, L30B Pro, L35B Pro, L40B, L45B, L45F and L50F.
Backhoe Loaders: BL61, BL61 Plus, BL71 and BL71 Plus.Recommended viscosity from -20ºC to +30ºC: 15W30
VOLVO CONSTRUCTION
Valid for all models from 2004 for long oil change intervals (500-600 hours, maximum 12 months),
especially in engines with Diesel Particulate Filter (DPF or FAP).
Wheel Loaders: AL80, AL100, AL100 Turbo and AL120 (AL Series).MANITOU
Valid for all models from 2004 for long oil change intervals (500-600 hours, maximum 12 months),
especially in engines with Diesel Particulate Filter (DPF or FAP).
Wheel Loaders: WA150PZ-6 to WA320PZ-6, WA380-6 to WA600-6 and their variants PZ, WA800-3 to WA1200-3.Compact Loaders: WA65-6 to WA90-6 and WA100M-6.
Compact Miniloaders: SK510-5 to SK1026-5 and their Crawler Skid Steer Loaders Turbo variants:
CK20-1 to CK35-1.Backhoe Loaders: WB93 and WB97 en variantes R-5
and S-5.
KOMATSU
The recommendations made for VOLVO CONSTRUCTION are valid for the brands Bolinder-Munktell, BM-Volvo, Clark-Michigan, Parca, Pel-job, Samsung and Zettelmeyer
AVEROIL GLOBAL 10W40/15W30/15W40
AVEROIL FAP 15W40
Excavators
AKERMANCrawler Excavators: EC 200, EC 300, EC 340, EC 450,
H9B, H10, H11B, H16C and H25C.Recommended viscosity from -20ºC to +15ºC: 15W30Do not use fuel with a sulfur contenance over 0,5%.
Caterpillar recommends quality levels:
API CJ-4 (CAT ECF-3) for engines with Diesel Particulate Filters (DPF or FAP);
API CH-4 (CAT ECF-1-α) and API CI-4 (CAT ECF-2) to avoid reducing the engine working life.
API CF-4 is not suitable for Caterpillar diesel engines.
Oil change interval: Maximum 3 months or 500 hours.
Wheel Excavators: M313D to M322D.Mini-excavators: 301.6C, 301.8C, 302.5C, 303C CR, 303.5C CR, 304C CR, 305C CR, 307D, 308D CR Fixed
Boom and Swing Boom.Small Hydraulic Excavators: 314D LCR, 311D LRR, 312D
/ 312D L, 314C LCR, 315D L and 319D L/LL.Medium Hydraulic Excavators: 320D L, 320D LRR, 321D LCR, 323D L/LN, 323D SA, 324D L/LN, 325D L/LN, 328D
LCR and 329D L/LN.Large Hydraulic Excavators: 330D L/LN, 336D LN, 345D
/ 345D L, 365C ES, 365C L and 385C / 385C L.Long Reach Excavators: 325D LRE, 336D LRE, 345C LRE
and 385C LRE.Recommended viscosity from -9ºC to +50ºC: 15W40
and from -20ºC to +30: 15W30
CATERPILLAR
Valid for all models from 2007 for long oil change intervals (500-600 hours, maximum 12 months),
especially in engines with Diesel Particulate Filter (DPF or FAP).
Mini-excavators: DX27Z, DX30Z, DX35Z, DX55, DX60R and DX80R.
Wheel Excavators: DX55W, DX140W, DX190W and DX210W
Track Excavators: DX140LC, DX140LCR, DX180LC, DX225LC, DX225LL, DX255LC, DX300LC SLR, DX300LC,
DX300LL, DX350LC, DX420LC, DX420LC RCW, DX480LC, DX480LC RCW and DX520LC.
And all models of the Solar series.Recommended viscosity from -15ºC to +40ºC: 15W40
DOOSAN DAEWOO
Valid for all models from 2004 for long oil change intervals (500-600 hours, maximum 12 months),
especially in engines with Diesel Particulate Filter (DPF or FAP).
Track Chain Excavators: CX130, CX160, CX210, CX240, CX290, CX330 and CX460, Isuzu engines included.Mini Excavators: models of the series CK and CX.
Wheel Excavators: models of the series WX.Recommended viscosity: 15W40 for all the models.
CASE CE
AVEROIL GLOBAL 15W30 for all models CSB, HDB and LCB.
Recommended viscosity for temperatures higher than -1ºC: 15W40
BENATI
Excavators and mini-excavators: E08, E10, E14, E16, E32, E35, E45, E50, E60, E80, E55W, 319, 321, 323, 325,
328, 335, 337, 341, 425, 428, 435 and 444.Recommended viscosity from -20ºC to +38ºC: 15W30
and from -15ºC to +38ºC: 15W40
BOBCAT
LubricantsEngine
AVEROIL GLOBAL 10W40/15W30/15W40
AVEROIL FAP 15W40
Crawler Excavators: FE18, FE20LC, FE28 and FE40 (Fiat).Recommended viscosity from -20ºC to +20ºC: 15W30;
higher than -10ºC: 15W40FIAT ALLIS
Valid for all models from 2004 for long oil change intervals (500-600 hours, maximum 12 months),
especially in engines with Diesel Particulate Filter (DPF or FAP).
Excavators with Cummins and Dresser engines: 6120, 6150LC, 6200LC, 6220LC, 6300LC, 6400LC, 6650 and
6650LC.Recommended viscosity in Cummins engines: from -20ºC to +20ºC: 15W30; higher than -10ºC: 15W40Recommended viscosity in Dresser engines: from
-20ºC to +50ºC: 15W40; from -20ºC to +40ºC: 15W30
DRESSER
Excavators: all models of the Robex series in the C, D, LC, NLC and W variants .
Recommended viscosity from -15ºC to +40ºC: 15W40; from -20ºC to +30ºC: 15W30
HYUNDAI Valid for all models for long oil change intervals (500-600 hours, maximum 12 months).
Valid for all models for long oil change intervals (500-600 hours, maximum 12 months).
Excavators: all models of the series EX, UH (Detroit, Hino, Hitachi and Isuzu engines) and ZX.
Recommended viscosity from -15ºC to +40ºC: 15W40; from -20ºC to +35ºC: 15W30
HITACHI
Excavators: W625E, W630E, W635E, W725, W730, W735 and W738LS.
Recommended viscosity from -20ºC to +20ºC: 15W30; higher than -10ºC: 15W40
FURUKAWA
Excavators: Evolution, Evolution SR, Evolution W, EX100 to EX455, EX135W to EX215W, EX75US-7, FH130.3 to
FH800 and FH85W to FH200W series. Recommended viscosity from -5ºC to +40ºC: 15W40;
from -25ºC to +30ºC: 15W30
FIAT KOBELCO-HITACHINew Holland recommends for its engines quality
levels equal to or greater than: API CI-4, CH-4/SL, ACEA E7, NWH 330H or NWH 330G.
Oil change interval: maximum 500 hours.
AVEROIL GLOBAL 10W40/15W30/15W40
AVEROIL FAP 15W40
Mini Crawler Excavators: all models of the series RHCrawler Excavators: all models of the series RH, RH
City and RH CompactWheel Excavators: models of the series MH
Recommended viscosity from -10ºC to +40ºC: 15W30; de -10ºC to +50ºC: 15W40
ORENSTEIN & KOPPEL
Wheel Excavators: Litronic (A309, A311, A312, A314, A316, A900C, A900 Compact, A900C ZW, A904C, A914C, A924C, A924C Plus, A934C, A934C HD, A944C HD and A954C HD).
Crawler Excavators: Litronic (R313, R317, R900C)Recommended viscosity from -20ºC to +45ºC: 10W40.
Alternative viscosity >-20ºC: 15W40.AVEROIL UHP 10W40 optimum lubricant for the models
Advanced/Classic Litronic (R906, R916, R924, R926), Litronic (R934C, R944C, R954C, R964C, R974C) and the models
R9100, R984C, R9250, R9350, R995, R996B, R9800 and Pontoon Excavators.
LIEBHERR
Valid for all models from 2007 for long oil change intervals (500-600 hours, maximum 12 months),
especially in Cummins engines with Diesel Particulate Filter
(CES 20081 specification).
Mini-excavators: PC09-1, PC14R-3, PC16R-3, PC20MR-2, PC50MR-2 and PC18MR-3 to PC45MR-3.
Midi Crawler Excavators: PC80MR-3, PC88MR-8 and PC110R-1.
Midi Wheel Excavators: PW98MR-6 and PW110R-1.Wheel Excavators: PW148-8 and PW160-7 to PW220-7.
Crawler Excavators: all models of the series 7, 8 and their variants LC, NHD, NLC and SP.
Crawler Excavators with reduced turning and others: PC138US-8, PC228USLC-3, PC210LC-8 MH,
PC240LC/NLC-8 HRD to PC350LC/NLC-8 HRD and PC450LC-8 HRD
Recommended viscosity from -20ºC to +40ºC: 15W30; from -15ºC to +50ºC: 15W40
KOMATSU
Compact Excavators: 8014 CTS, 8016 CTS, 8018 CTS, 8020 CTS, 8025 ZTS, 8030 ZTS, 8035 ZTS, 8040 ZTS, 8045 ZTS, 8055 and
8065 RTS.Wheel Excavators: JS130W to JS200W.
Crawler Excavators: JS115 to JS 460 and JZ140 to JZ255. Recommended viscosity from -25ºC to +30ºC: 15W30
JCB Valid for all models for long oil change intervals (500-600 hours, maximum 12 months).
Mini-excavators: 17SR, 27SR, 30SR and 50SR.Midi Crawler Excavators: 80CS, 70SR and previous models.
Excavators: SK170, SK210, SK250, SK260, SK290LR, SK295, SK485 and SK350.
Back Excavators: B90B, B100B, B110B, B115B and generally on all wheel backhoe loaders.
Recommended viscosity: 15W40
NEW HOLLAND
New Holland recommends for its engines quality levels equal to or greater than:
API CI-4, CH-4/SL, ACEA E7, NWH 330H o NWH 330G.Oil change interval: maximum 500 hours.
ExcavatorsLubricantsEngine
AVEROIL GLOBAL 10W40/15W30/15W40
AVEROIL FAP 15W40
Crawler Excavators: all models LC, LC-2, LC-3, LCM-2, LCM-3 and NLC-2 of the series SE.
Wheel Excavators: all models W-2 and W-3 of the series SE.
SAMSUNG
Hydrostatic Drive Excavators: all models of the series GY, HC, LC, TC, TCS and TY, with Agrom, Detroit and
Deutz engines.Recommended viscosity: 15W40.
Alternative viscosity: de -20ºC a +25ºC: 15W30
POCLAIN(CASE - POCLAIN)
Valid for all models from 2005 for long oil change intervals (500-600 hours, maximum 12 moths),
especially in engines with Diesel Particulate Filter (DPF or FAP).
For its Euro 3 engines Volvo requires quality levels E5/CH-4+ EO VOL VDS3 and for its Euro 4 and Euro 5
engines with Particulate Filter (DPF or FAP), E9/CJ-4+ EO VOL VDS4 .
Compact Excavators: EC15B, EC17C, EC18C, EC20B, EC20C, EC25, EC27C, ECR28, EC30, EC35C, EC55C,
ECR38, ECR48C, EC55B Pro, ECR58 Plus and ECR88 Plus.Wheel excavators: EW140C, EW160C, EW180C, EW210C
and EW230C.Crawler Excavators: EC140C, ECR145C, EC160C, EC180C, EC210C, EC235C, ECR235C, EC240C, EC290C, ECR305C,
EC360C, EC460C and EC700C.Recommended viscosity: 15W40.
Alternative viscosity: 10W40
VOLVO CONSTRUCTION
Compact Excavator: TC15Recommended viscosity: 15W30.
Mini-excavators: TC16, TC20, TC25, TC29, TC35, TC37, TC48 and TC50.
Recommended viscosity: 15W30.Crawler Excavators: HR13, TC60, TC75 and TC125.
Recommended viscosity: 10W40.Wheel Excavators: TW70, TW85 and TW110
Recommended viscosity: 10W40.Alternative viscosity from -15ºC to > 30ºC: 15W40
Mining Excavators: RH120 and RH 340.Recommended viscosity: 15W40.
TEREX(TEREX O&K)
Quality levels recommended:
API CJ-4 (CAT ECF-3) for Cummins engines with Diesel Particulate Filters (DPF or FAP)
API CH-4 (CAT ECF-1-a) and API CI-4 (CAT ECF-2, Global DHD-1) to avoid reducing the engine
working life.
Oil change interval: Maximum 3 months or 500 hours.
AVEROIL GLOBAL 10W40/15W30/15W40
AVEROIL FAP 15W40
Dumpers
BELL
AVEROIL UHP 10W40 a unique product recommended for the following models:Articulated Dumpers: 2306D, 24006D, 28006D, 38006D, 42006D and 42006D Mkll
Articulated Trucks: ADT D-Series, B18D, B20D, B25D-Tunnel Truck, B25D, B25DN, B30D, B35D, B40D, B45D and B50DAVEROIL FAP and AVEROIL GLOBAL 15W40: valid for all models with reduced oil change interval
Valid for all models from 2004 for long oil change intervals (500-600 hours, maximum 12 months),
especially in engines with Diesel Particulate Filter (DPF or FAP).
Articulated chassis dumpers with hydrostatic or mechanical transmission: D85AHA, D85AHG, D100AHA, D120AHA, D120AHG, D150AHG, D250AHG, D250AHGA,
D300AM, D300AMG, D350AHG, D400AHG, D600AP, D600APG, D700AP, D900AP, D1000AP and D1000APG
Rigid Chassis Dumpers: D150RM, D150RM X4, D150RMA, D150RMA X4, D150RMG, D150RMG X4, D175RMS and
D150RMS X4All-terrain Rigid Chassis Dumpers: 200-RM, 200-RH, 200-RMG, D201RH, D201RHS, D201RHG, D201RHGS,
D250RM, D250RHG, D300RM and D300RHGFAVEROIL TIR and MAXICER TDI exceed AUSA
requirements for Deutz, Hatz, Isuzu, Kubota, Lombardini and Perkins engines.
Recommended viscosity from -18ºC to +30ºC: 15W30
AUSA
AVEROIL UHP 10W40 a unique product recommended for the following models:
Articulated Dumpers: AH250-D, AH300-D, AH350-D, AH400-D and AH500-D
Rigid Dumpers: EH750-3, EH1100-3, EH1700-3, EH3500ACII and EH 5000ACII
Recommended viscosity: 15W40HITACHI
Valid for all models for long oil change intervals (500-600 hours, maximum 12 months), especially in engines with Diesel Particulate Filter (DPF or FAP).
Articulated Dumpers: 325, 327B, 330, 330B, 330E, 335B and 340B
Recommended viscosity: 15W40CASE
Valid for all models for long oil change intervals (500-600 hours, maximum 12 months), especially in engines with Diesel Particulate Filter (DPF or FAP),
which require CAT ECF-3 quality levelCATERPILLAR
3-Axle Articulated Dumpers: 725, 730, 730 Ejector, 735, 740 and 740 Ejector Articulated Truck
Rigid Dumpers for Mining: 785D, 789C and 793D Mining Truck, 793F and 797F
All-terrain Dumpers: 770, 772, 773F, 775F and 777FRecommended viscosity from -15ºC to +50ºC: 15W40
Alternative viscosity from -18ºC to +40ºC: 15W30API CF-4 is not recommended in Caterpillar diesel engines
Valid for all models for long oil change intervals (500-600 hours, maximum 12 months), especially in engines with Diesel Particulate Filter (DPF or FAP).
Articulated Dumpers: 714, 718 and 722AVEROIL TIR and MAXICER TDI exceed the JCB
requirements for the engines equipped on these models.Recommended viscosity: 15W40
JCB
LubricantsEngine
AVEROIL GLOBAL 10W40/15W30/15W40
AVEROIL FAP 15W40
Valid for all models for long oil change intervals (500-600 hours, maximum 12 months), especially in engines with Diesel Particulate Filter (DPF or FAP).
Articulated Dumpers: all the models with Cummins, Deutz and Hatz engines of the 2000 to 9000 series Rigid Dumpers: TR35, TR45, TR60, TR70 and TR100
Dumpers Dumpers for Mining: all the models with Cummins and Detroit Diesel engines of the MT3000 to MT6300 series
Recommended viscosity: 15W40
TEREX
Valid for all models from 2005 for long oil change intervals (500-600 hours, maximum 12 months),
especially in engines with Diesel Particulate Filter (DPF or FAP).
For its Euro 3 engines Volvo requires quality levels E5/CH-4+VDS3 and for its Euro 4 and Euro 5 engines
with Particulate Filter (DPF or FAP) E9/CJ-4+VDS4.
Articulated Dumpers: A25E, A30E, A35E, A35E FS, A40E and A40E FS
Recommended viscosity: 15W40
VOLVO CONSTRUCTION
Valid for all models for long oil change intervals (500-600 hours, maximum 12 months), especially in engines with Diesel Particulate Filter (DPF or FAP).
Articulated Dumpers: HM250-2, HM300-25, HM350-2 and HM400-2
Rigid Dumpers: HD325-7, HD405-7, HD465-7, HD605-7 and HD785-7
Recommended viscosity: 15W40
KOMATSU
Valid for all models for long oil change intervals (500-600 hours, maximum 12 months)
Articulated Dumper: TA230 LitronicRecommended viscosity: 15W40LIEBHERR
AVEROIL GLOBAL 10W40/15W30/15W40
AVEROIL FAP 15W40
Bulldozer
Valid for all models for long oil change intervals (500-600 hours, maximum 12 months), especially in engines with Diesel Particulate Filter (DPF or FAP).
All models of the series FD5, FD7, 8B, AD8, BD8, 10B, 10C, AD10B, BD10B, 11B, 14C, 14CTA, 16B, 20, FD20,
21B, 21C, FD30, 31, FD40, 41, 41B and FD50 with Cummins, Fiat and other engines.
Recommended viscosity from -18ºC to >35ºC: 15W40
FIAT ALLIS
The models D80, D150, D150LGP, D180, D180DSD, D180LGP, D180PS, 350, 350PS, FD30C, FD145, FD175
and FD255 Recommended viscosity from -15ºC to +40ºC: 15W40
FIAT KOBELCO-HITACHI
Valid for all models from 2008 for long oil change intervals (500-600 hours, maximum 12 months),
especially in engines with Diesel Particulate Filter (DPF or FAP).
Bulldozers: D21A-8E0, D31EX-22, D37EX-22, D39EX-22, D51EX-22, D61EX-15E0, D63E-12, D65E-12, D65EX-16,
D65WX-16, D68ESS-12, D85ESS-2, D85ESS-2A, D85EX-15E0, D85EX-15R, D155A-2A, D155A-5,
D155AX-6, D275A-5, D275A-5R, D275AX-5E0, D375A-5, D375A-5R, D375A-6, D475A-5E0, D475ASD-5E0,
D575A-3 and D575A-3 SDSwamp Bulldozers: D21P-8E0, D31PX-22, D39PX-22,
D51PX-22, D61PX-15E0, D65P-12, D65PX-16, D85PX-15E0 and D85PX-15R
Pipelayers: D85C-21, D155C-1 and D355C-3Recommended viscosities:
from -15ºC to +20ºC: 15W30; from 0ºC to +50ºC: SAE 30; from -15ºC to +50ºC: 15W40.
KOMATSU
JOHN DEEREAVEROIL UHP 10W40 product recommended for the following models:
450J, 550J, 650J, 700J, 750J, 850J, 850J WH, 950J, 950J WH, 1050J and 1050J WHAVEROIL FAP and AVEROIL GLOBAL 15W40: valid for the models 750J, 850J, 850J WH, 950J WH and previous models of
the series B, C, D, E, E LT, G, G LT, LGP, LT, H, H LT, J LT and J XLT with low oil change interval
The models 180, 280 and 380 of the different series with Cummins and Detroil Diesel engines.
MAXICER TO-4 SAE 40: unique recommendation for Waukesha engines mounted on the equipment, from
+24ºC to +43ºC (SAE 30 from +4ºC to +24ºC)
CLARK MICHIGAN
Valid for all models for long oil change intervals (500-600 hours, maximum 12 months), especially in engines with Diesel Particulate Filter (DPF or FAP),
which require CAT ECF-3 quality levelCATERPILLAR
Small Bulldozer: D3K, D4K and D5KRecommended viscosity: 15W30
Medium Bulldozer: D6N, D6T, D7E and D7T 2 Series Recommended viscosity: 10W40
Large Bulldozer: D8T, D9T, D10T, D11T and D11T CDRecommended viscosity: 15W40
Alternative viscosity from -10ºC to +50ºC: 15W40API CF-4 is not suitable for Caterpillar diesel engines.
New Holland recommends for its engines quality levels equal to or greater than:
API CI-4, CH-4/SL, ACEA E7, NWH 330H or NWH 330G.Oil change interval: maximum 500 hours.
LubricantsEngine
AVEROIL GLOBAL 10W40/15W30/15W40
AVEROIL FAP 15W40
Models over 130HP: D150B, D180, D180LGP, D180LT, D180XLT, D255 and D350
Recommended viscosities: from -20ºC to +20ºC: 15W30; from-15ºC to +40ºC: 15W40
NEW HOLLANDCONSTRUCTION
The models MF 200, MF 300, MF 400, MF 500, MF 600C, MF D 600C, MF 700C, MF D 700C, MF 2244 and MF 3366
Recommended viscosities: >-15ºC: 15W30; >-1ºC: 15W40
MASSEY FERGUSON
Valid for all models for long oil change intervals (500-600 hours, maximum 12 months).
The models WD-17, WD-30 with Allis-Chalmers, Cummins and Detroit Diesel engines.
Recommended viscosity: 15W40RAYGO WAGNER
The models Terex 82-80 and Euclid T-12 (except 2-Stroke Detroit Diesel engines)
Recommended viscosity: 15W40TEREX
Valid for all models for long oil change intervals (500-600 hours, maximum 12 months), especially in engines with Diesel Particulate Filter (DPF or FAP),
which require CAT ECF-3 quality level.
The model Tiger 690 with Caterpillar 992C and 992D engines
Recommended viscosity: 15W40API CF-4 is not suitable for Caterpillar diesel engines.
TIGER
Valid for all Litronic models for long oil change intervals (500-600 hours, maximum 12 months).
For the Litronic models PR 714, PR 724, PR 734, PR 744, PR 754 and PR764 included their variants L, LGP and
XL. Valid also for previous models.Recommended viscosity: 15W40
Alternative viscosity from -15ºC to +30ºC: 15W30
LIEBHERR
New Holland recommends for its engines quality levels equal to or greater than:
API CI-4, CH-4/SL, ACEA E7, NWH 330H or NWH 330G.Oil change interval: maximum 500 hours.
AVEROIL GLOBAL 10W40/15W30/15W40
AVEROIL FAP 15W40
Motor Graders
Valid for all models from 2007 for long oil change intervals (500-600 hours, maximum 12 months),
especially in engines Cummins with Diesel Particulate Filter (DPF or FAP) (CES 20081 specification).
Motor Graders: Compact: C60C, C66C, C70C, C80C and C86C; Production: C110C and C116C and the
former models 100-T, 500, 600 and 700 series with Allis-Chalmers, Cummins and Detroit engines.
AVEROIL TIR and MAXICER TDI exceed the CHAMPION requirements for Allis-Chalmers, Cummins and Detroit
enginesRecommended viscosity from -18ºC to >35ºC: 15W40
CHAMPION
Valid for all models from 2007 for long oil change intervals (500-600 hours, maximum 12 months),
especially in engines with Diesel Particulate Filter (DPF or FAP).
Motor Graders DEERE: 670G, 770G, 870G and Six-Wheel Drive models: 672G, 772G and 872G.
Valid also for previous modelsRecommended viscosity: 15W40
JOHN DEERE
Valid for all models from 2007 for long oil change intervals (500-600 hours, maximum 12 months),
especially in engines Cummins with Diesel Particulate Filter (DPF or FAP) (CES 20081 specification).
Motor Graders: 830, 850, 870, A400E, A450E, A500E and A560E with Cummins and Dresser engines
Recommended viscosity in Cummins engines: from -20ºC to +20ºC: 15W30; higher than -10ºC: 15W40Recommended viscosity in Dresser engines: from
-20ºC to +40ºC: 15W30; from -20ºC to +50ºC: 15W40
DRESSER
Caterpillar recommends quality levels: API CJ-4 (CAT ECF-3) for engines with Diesel
Particulate Filters (DPF or FAP);
API CH-4 (CAT ECF-1-α) and API CI-4 (CAT ECF-2) to avoid reducing the engine working life.
API CF-4 is not suitable for Caterpillar diesel engines.
Oil change interval: maximum 3 months or 500 hours.
Motor Graders: 12M, 14M, 120M, 140M, 160M, 160M AWD and previous models. CATERPILLAR
Graders: 65-B,100-C, 150-C, 200-C, FG65A, FG65B, FG75, FG75A, FG85, FG85A, FG95, FG105, FG105A
and M-65, with Allis-Chalmers and Fiat engines, B series included
FIAT ALLIS
Graders: G80, G140, G170 and G200Recommended viscosity from -5ºC to +40ºC: 15W40;
from -25ºC to +30ºC: 15W30FIAT KOBELCO-HITACHI
New Holland recommends for its engines quality levels equal to or greater than:
API CI-4, CH-4/SL, ACEA E7, NWH 330H or NWH 330G.Oil change interval: maximum 500 hours.
LubricantsEngine
AVEROIL GLOBAL 10W40/15W30/15W40
AVEROIL FAP 15W40
Valid for all models from 2007 for long oil change intervals (500-600 hours, maximum 12 months),
especially in engines with Diesel Particulate Filter (DPF or FAP).
Motor Graders: GD511A-1, GD521A-1, GD555-3, GD611A-1, GD623A-1, GD655-3, GD661A-1, GD675-3,
GD705A-4 and GD825A-2. Valid also for the rest of models
Recommended viscosity from -20ºC to +40ºC: 15W30; from -15ºC to +50ºC: 15W40
KOMATSU
Graders: F106.6 and F106.6A, F140 Tier 1 and Tier 2, F156.6, F156.6A, F156.7, F156.7A, F170, F170 Tier 2, F200,
G110 and G110 6WDRecommended viscosity: 15W30
Alternative viscosity: 15W40
NEW HOLLAND
For its Euro 3 engines Volvo requiresquality levels EO VOL VDS3/E7 and for its Euro 4 and Euro 5 engines with Particulate Filter (DPF o
FAP) E9/CJ-4+ EO VOL VDS4
Motor Graders: G930, G940, G946, G960, G970, G976 and G990
Recommended viscosity: 15W40.Alternative viscosity: 15W30.
VOLVO CONSTRUCTION
Valid for all models from 2004 for long oil change intervals (500-600 hours, maximum 12 months).
Motor Graders: F106, F106A, F156, F156A, F206 and F206A
AVEROIL TIR and MAXICER TDI exceed the O&K requirements for the models indicated.
Recommended viscosity: 15W40
ORENSTEIN & KOPPEL
New Holland recommends for its engines quality levels equal to or greater than:
API CI-4, CH-4/SL, ACEA E7, NWH 330H or NWH 330G.Oil change interval: maximum 500 hours.
AVEROIL GLOBAL 10W40/15W30/15W40
AVEROIL FAP 15W40
Road Machinery
AVEROIL FAP, AVEROIL TIR and MAXICER TDI exceed the BOMAG requirements for Allis-Chalmers, Detroit,
Deutz and International engines.
Tandem Rollers: BW80AD-2, BW90AD-2, BW100ADM-2, BW900-2, BW100AD-4, BW120AD-4, BW125AD-4, BW135AD, BW138AD,
BW141/151AD-4, BW154AD-4, BW161AD-4, BW161ADH-4, BW190/202/203AD-4, BW154AP-4, BW174AP-4,
BW141/151/154/174AD-4 AM, BW190/203AD-4 AM (articulated) and BS100/120/150/180
Single Drum Rollers: BW124/145 Refuse Compactors: BC462/472RB, BC572/672/772/972/1172 RB-2,
BC472/772RSSoil Compactors: BC462EB and BC772EB-2
Asphalt Stabilisers/Recyclers: MPH122-2/125/362 and MPH364 and MPH454R (U.S. Market)
Recommended viscosities: Allis-Chalmers and Deutz engines: >-20ºC: 15W40; from -25ºC to
+30ºC: 10W40 and from -25ºC to +25: 15W30Detroit engines: 15W40, Alternative viscosity in 2-stroke engines,
from 18ºC to +38ºC: SAE 40International engines: from -7ºC to +49ºC: 15W40 and from -20ºC
to +21ºC: 15W30
BOMAG
Caterpillar recommends quality levels: API CJ-4 (CAT ECF-3) for engines with Diesel
Particulate Filters (DPF or FAP);
API CH-4 (CAT ECF-1-α) and API CI-4 (CAT ECF-2) to avoid reducing the engine working life.
API CF-4 is not suitable for Caterpillar diesel engines.
Oil change interval: Maximum 3 months or 500 hours.
Wheel Asphalt Pavers: AP300, AP600, AP600D, BB650 and BB740Track Asphalt Pavers: AP655D, AP755, BB621C and BB651C
Road Reclaimers: RM300 and RM500Compactors: all models of the CB, CC, CD, CP, CS, PF, PM (Cold
Planers), PS series and the soil and refuse compactors: 816F 2 Series, 825G, 825G 2 Series, 825H, 825H 2 Series, 826H and 836H.
Recommended viscosity from -9ºC to +50ºC: 15W40; from -25ºC to +50ºC: 10W40 and from -20ºC to +30: 15W30
CATERPILLAR(CAT-BITELLI)
Valid for all models from 2007 for long oil change intervals (500-600 hours, maximum 12 months),
especially in Cummins engines (EO CUM 20077/EO CUM 20078 specifications) and Cummins engines with
Diesel Particulate Filter (CES 20081 specification).
Single Drum Vibratory Rollers: CA134D and PD, CA144D and PD, CA150/152/182/250/252/260/262/280/
282/300/302/362/402/500/512/600/602/610/612/702 and CA250-II/260-II/280-II
Double Drum Vibratory Rollers: CC102/122/142/722/800/900/900G/900S/1000, CC224HF/234HF/324HF/334HF/424HF/524HF/624HF, CG223HF/233HF/333HF
Combi Rollers: CC102C/122C/142C/224CHF/234CHF/324CHF/334CHF/424CHF/524CHF
Steel Drum Rollers: CS142/142MPneumatic Rollers: CP142/224/274
Tracked Pavers: F5C, F5CS, F6C, DF45C, DF45CS, DF65C, F121C, F141C, F181C, F182CS, F300CS, DF145C and DF145CS
Wheeled Pavers: F6-4W, DF65P, F121-W/D, F121-4W/D, F121-6W/D, F141-W/D, F141-4W/D, F141-6W/D, DF115P/D, DF125P/D, F161-W,
F161-6W, F161-8W, DF145PMobile Feeders: MF250 and MF300C
Planers: PL500T/TD, PL2000LS/S and PL2100SPrefered viscosity: 10W40.
Alternative viscosity from -15ºC to >30ºC: 15W40
DYNAPAC
LubricantsEngine
Valid for all models from 2007 for long oil change intervals (500-600 hours, maximum 12 months),
especially in engines with Diesel Particulate Filter (DPF or FAP).
Single Drum Vibratory Rollers: X2, X3, X4, X5 and X6Tandem Vibratory Rollers:
VTA201-80/201-100/202-100/202-120/80/K3/K4Combined Vibratory Rollers:
VTA80MX/90MX/100MX/202MX/418GC/418MXPneumatic Tyre Roller: CNL824
Recommended viscosity: 15W40
LEBRERO
Valid for all models with diesel engines from 2007 for long oil change intervals
(500-600 hours, maximum 12 months).
Ride on Power Trowel: CRT48-35L-PSRecommended viscosity: 15W30
Hydrostatic Vibratory Roller: RD16-90Recommended viscosity: 15W40
Vibratory Trench Roller: RT56-SC-2/RT82-SC-2Recommended viscosity Lombardini: 15W40
Tamdem Rollers with Operator: RD16-90, RD27-100 and RD17-120
Recommended viscosity: 15W40Vibratory Plates: all the models of the DPU and VP series
with diesel and petrol enginesRecommended viscosity: 10W40 and 15W30
Reversible Vibratory Plates: all the models of the BPU series with petrol gasoline
Recommended viscosity: 15W30
WACKER NEUSON
For its Euro 3 engines Volvo requires quality levels EO VOL VDS3/E7 and for its Euro 4 and Euro 5 engines with Particulate Filter (DPF or FAP): E9/CJ-4+ EO VOL VDS4
ABG Wheeled Pavers: ABG5570/5870/6870: unique recommendation: AVEROIL UHP 10W40 (ACEA E6)
Asphalt Compactors: DD14S/16/22/24/31HF/38HF/85/95/130/130HF/138HF/138HFA
Preferred viscosity: 15W40.Soil Compactors: SD70D/70DX/77F/100D/
100F/105DX/105F/122D/122DX/160DX/190DX/200DXPreferred viscosity: 15W40.Wheeled Millers: MW500
ABG Tracked Pavers: ABG2820/5820/6820/7820B/8820B/9820
Preferred viscosity: 10W40.
VOLVO CONSTRUCTION
Landfill Compactors: TC400/550Recommended viscosity Cummins engines: 15W40.
Tandem Vibratory Rollers: TV800/800H/900/1000/1200/1200H/1300/1400
Prefered Viscosity: 15W30. Alternative viscosity: 15W40
Asphalt Pavers: all the models of the 300, 400, 500, 700, CR, CR/L, CR/LS, CR/RX, CR/S and VDA series.
Recommended viscosity: 15W40.Cold Planers: PR165/220/330T/600/950
Recommended viscosity: 15W40.Reclaimers/Stabilizers: RS350/425C/600C
Recommended viscosity: 15W40.
TEREX
Recommended quality levels:
API CJ-4 (CAT ECF-3) for Cummins engines with Diesel Particulate Filters (DPF or FAP);
API CH-4 (CAT ECF-1-α) and API CI-4 (CAT ECF-2, Global DHD-1) to avoid reducing the engine
working life.
Oil change interval:Maximum 3 months or 500 hours.
AVEROIL GLOBAL 10W40/15W30/15W40
AVEROIL FAP 15W40
Heat Transfer Fluid
Asphalt
Degreaser-Mould Release Agent
Circuit Cleaner
MASTERCLEAN MOTORPetroleum-based degreaser without any chlorinated solvents which can be used
pure or emulsioned in water for cleaning tanks, tankers, baths, asphalt pavers, tools, engines, boats decks and bilges and even floors and all kinds of metal
parts dirtied by tar, fuel oil, greases and oils. It acts cold with great speed.
FLOW DES-AIt is used by diluting in water as a mould release agent to avoid the adherence of the asphalt to metallic surfaces in truck beds,
compactors and tools.
OLITERMComplete range of synthetic or mineral based heat transfer fluids formulated from highly refined bases with great thermal stability and resistance to oxidation. Maximum protection of the thermal circuits and minimum formation of residues. Available in a wide range of viscosities.
MASTERCLEAN TFBalanced mix of petroleum solvents for cleaning thermal circuits without the need to dismantle them. Endowed with a high detergent power, it effectively dissolves all kinds of sludge, impurities and residues adhering to the thermal circuits and tanks. Totally miscible with mineral-based oils. Consult miscibility with synthetic oils. Reusable after correct decanting and filtering.
OLIOLSynthetic oils for units and reducers lubrication which work with temperatures over 85ºC. Recommended in asphalt miller/recycler units.
Scale Solvent
Piling
FLOW CEMENT Powerful scale solvent of an acidic nature with passivants, inhibitors and moistening agents with great scale solvent power. It effectively eliminates salts, scale, incrustations, spread mortar and cement in concrete mixers, moulds, tools, piping, heating systems, phosphatation systems, compressors, condensers, projection machinery in tunnels etc. Use diluted in water.
OLIPES has developed a complete catalogue of high performance greases and hydraulics, specifically developed for piling and micropiling machinery. Consult our technical assistance service (SAT) about the most suitable product in line with the machine and the working conditions.
FLOW DESComplete line of formwork release agents for concrete which provide solutions adapted to all types of production processes and moulds, affording excellent finishes, maximum performance, ease of application and total protection of moulds.
APPLICATIONImmediate mould removalStain-free small and medium prefabrication. Artificial stone.Medium and large prefabrication with thermal curing.Large prefabrications in civil construction.Construction, bridges and foundations.Our technical department will advise you about the most appropriate formwork release agent in each case and it may offer you customized solutions for special processes.FLOW DES BBO: Environmentally-friendly biodegradable formwork release agent.
PRODUCTFLOW DES I/2003FLOW DES 11-AFLOW DES 20-CFLOW DES PFLOW DES A
Formwork Release Agents
Concrete
Air Compressors
TYPE OFCOMPRESSOR
FLOW SYN CPSynthetic PAO
FLOW CPMineral
Screw
Screw
Piston
Screw
Piston
Screw
Hydrovane
Piston
Rotary Vane
Screw
Piston
Type 30/40 (Piston)
SS, TS... (Piston)
Pacair
SSR (Screw)
Centac (Centrifugal)
VHP, XHP (Screw)
Screw
Piston
Screw
Piston
Screw
Rotary Vane
Piston
Screw
Piston
Screw
Piston
Screw
Screw
Piston
32 (>15ºC: ISO 46)
32/46/68
68
32/46/68
68
32/46/68
46/68
46
32
68
46/68
32/46/68
46/68
46/68
68 (Contact SAT)
46
46
46/68
Optional
Optional
Optional 68
Optional
Optional 68
Optional
100/150
100/150
100/150
Optional
100
100
100
Optional 46
Optional 32
Optional 68
Optional
100
Optional
100/150
Optional
100 (Contact SAT)
100/150
Optional
Optional 46
100/150
Optional 46
Optional
100/150
Manufacturer recommendation: SSR Ultra Coolant®. Contact Olipes SAT
BRANDSABAC
ATLAS COPCO
CHICAGO NEUMATIC
COMPAIR-HOLMAN
FULLER (DAVEY)
GARDNER DENVER
INGERSOLL-RAND
PORTABLES
JOY MANUFACTURING
KAESER
LeROI
QUINCY
SCHRAMM
SULLAIR
WORTHINGTON
This is merely an orientative guide for lubricants (mineral and synthetic) recommended by the main air compressor manufacturers. For specific recommendations about each compressor brand and model, consult the manufacturer’s manual or go to the OLIPES Technical Assistance Service (SAT). Do not mix lubricants of different kinds, even when they are all synthetic, as they may be incompatible. The recommended viscosity shall depend on the working conditions of the compressor.
Base Oils
Mineral
PAO (Poly-Alpha-Olefin)
Ester
Polyglycol
COMPRESSOR OILS COMPATIBILITY DEPENDING ON THEIR NATUREEster
MMMM
Polyglycol
NMNMMM
PAO (Poly-Alpha-Olefin)
MMM
NM
Mineral
MMM
NMM: Miscibles NM: Unmiscibles
* In red the viscosity ISO VG recommended by the manufacturer. In black alternative viscosities according to the working conditions.
Generators
OLIPES has developed state-of-the-art lubricants formulated in line with the requirements of the most advanced equipment for the most modern compressors and electrogeneous units, thereby protecting the original warranties.
For equipment which works under extreme conditions: excessively high or low temperatures, lubrication for life, very long oil change periods, greater reduction in energy consumption etc.
OLIPES recommends the use of synthetic lubricants whenever the latter are accepted by the manufacturer.
Not all synthetic lubricants are mutually compatible and where one may work perfectly, another may cause irreversible damage to the equipment. Our Technical Assistance Service (SAT) will advise you on your choice of the most appropriate lubricant in line with the manufacturers’ requirements, the service conditions and the maintenance plan.
AVEROIL GLOBAL 10W40/15W30/15W40
AVEROIL FAP15W40
AVEROIL UHP 5W30/10W40
Recommended
Recommended
Acceptable
Recommended
Recommended
Recommended
Acceptable
-
Recommended
-
Recommended
Recommended
Recommended
Recommended
Recommended
Recommended
Acceptable
Recommended
Acceptable
Recommended
QUALITY LEVEL
SG 30
CH-4/E5 15W40
E7/E6 15W40
CH-4 15W40
CF-4/CH-4 15W40
CF-4 15W40
CI-4/CJ-4 15W40
E3/E5/E7/E4/E6 10W40
SJ 15W30
CJ-4 15W40
E3/E5 15W40
SD/SF 15W30
SE/CF 15W30
SJ/CF 15W40
CF 15W40
CG-4/E3 15W40
CD 30
LDF 15W40/LDF2 10W40
VDS3/VDS4 15W40
CD 15W40
Optional
Optional
Recom. (2009)
Optimal
Optimal
Optimal
Recom. (EPA 07)
Acceptable
-
Recommended
Optional
-
-
Optimal
Optimal
Optimal
Optional
Optional
Optimal (EGR &DPF)
Optimal
-
-
Optimal (2009)
-
-
-
Optimal (EPA 07)
Optimal
-
Optimal
Optimal
-
-
-
-
-
-
Optimal
-
-
BRANDSAMCA INTERNATIONAL
AMSTRONG POWER SYSTEMS
ATLAS COPCO
CATERPILLAR
CUMMINS
DAEWOO
DETROIT DIESEL Incl. MTU
DEUTZ
HONDA
ISUZU
IVECO Incl. AIFO
KAWASAKI
KUBOTA
LOMBARDINI
MITSUBISHI
PERKINS
SAME
SCANIA
VOLVO Incl. VOLVO PENTA
YANMAR
GreasesHigh performance
lubricant
MAXIGRAS C45 EPHigh-quality multipurpose EP lithium grease. Excellent
properties of Extreme Pressure.Suitable for centralised lubrication (in accordance with
NLGI grade).
NLGI 000/00, 0, 1 y 2. En NLGI 2: DIN KP2K-20 ISO-L-XBCEB-2
MAXIGRAS C42Anhydrous calcium grease for universal application. Lubrication of chassis, leaf springs, guides and general greasing. Recommended in piling machinery.
NLGI 2 DIN M2G-20 ISO-L-XBBEA-2
MAXIGRAS 46MOLY grease (black) with EP additives.
High adherence to metals. Recommended for the lubrication of joints, levers, cogs,
axles and rod pins.
NLGI 2 DIN KPF2K-20 ISO-L-XBCEB-2
MAXIGRAS COMPLEX MComplex lithium grease (black) with solid EP additives.
High adherence to metals even at very high temperatures. Recommended for the lubrication
of joints, levers, cogs, axles, rod pins and hydraulic hammers with a Central Lubrication
(EC) system from the machine.
NLGI 2 DIN KPF2P-20 ISO-L-XBEHB-2
MAXIGRAS COMPLEX PICK
Complex grease (copper-coloured) with
strong dose of EP solid additives and anti-wear.
High adherence to metals even at very high temperatures
(up to 1200ºC). Lubrication of major tonnage hydraulic hammers (1.5 to 6 T). Suitable for hammers with automatic lubrication with disposable cartridge (not recommended for EC from the machine).
MAXIGRAS COMPLEX EPComplex lithium grease (blue) particularly suited
for lubricating bearings, rod pins, axles, wheel bushing and all kinds of mechanical elements
in heavy machinery, quarries, gravel pits and off-road vehicles, with large loads
and high temperatures. Suitable for centralised lubrication systems (in accordance with NLGI grade).
NLGI 2/3 DIN KP2P-20 ISO-L-XBEHB-2
MAXIGRAS T6Stain-free, synthetic grease. Does not drip.
Recommended for the lubrication of bearings and heavy machinery equipment and concrete
mixers under the presence of water.
NLGI 2 DIN KP2G-30 ISO-L-XCBHB-2
MAXIGRAS 70/1: antiseizing copper grease especially for drill pipes.MAXIGRAS 91: semisynthetic tixotropic lubricants with gel-like appearance, especially for gears and reducers of conveyor belts.MAXIGRAS ANTISEIZE: anti-block paste especially for assembling. Resists up to 1200ºC.
OTHER RECOMMENDED LUBRICANT GREASES:
Synthetic grease (red), water repellent, high temperatures and high loads. Especially for sieves.
NLGI 1 DIN KPHC1G-20 ISO-L-XAXABHB-1
MAXIGRAS RT6W
MAXIGRAS 101Complex calcium sulphonate grease for high temperatures in the presence of water. Corrosion-proof, anti-acid and alkalis. Lubrication of chains, cables, bearings, wheel bushing and open gears in aggressive
environments.Special for forest machinery, heavy machinery and port.
NLGI2 DIN KP2R-20 ISO-L-XBEIB-2
MAXIGRAS 94 OGLFluid grease for open gears and weaving
steel cables, recommended in cement plants, wind farms and heavy machinery
NLGI 0/00 DIN OGPF00N-10 ISO-L-XADHB-00
MAXIGRAS 50 GEARSemifluid grease especially for cranes, jibs, chains,
cables, open gears, sliding guides.
NLGI 0 DIN OGP0G-10 ISO-L-XABHB-0
MAXIFLUID HLP32/46/68
MAXIFLUID HVLPD46/68
MAXIFLUID HV32/46/68SPECIFICATIONS MAXIFLUID HVLP
46/68
SPECIFICATIONS
ISO-SAE Grade
High-Pressure hydraulic fluid
Other specifications
OEM(Manufacturer’s specifications)
32/46/68
DIN 51524/2 (HLP)AFNOR NFE 48-603 HM
ISO 6743/4 (HM)ISO 11158 (HM)
Vickers M-2950-S/I-286-S3Cincinnati P-68/70/69
Denison HF-0/HF-1/HF-2SEB 181222
Case IH MS 1216NH 632/646/668
46/68
DIN 51524/2-3 (HLP/HVLP)AFNOR NFE 48-603 HM/HV
ISO 6743/4 (HR)ISO 11158 (HR)
Vickers M-2950-S/I-286-S3Cincinnati P-70/69
Denison HF-0/HF-1/HF-2SEB 181222
Case IH MS 1216MF M-1116 (10W20)
NH 646/668
46/68
DIN 51524/2-3 (HLP/HVLP) *AFNOR NFE 48-603 HM/HV*
ISO 6743/4 (HR) *ISO 11158 (HR) *
Vickers M-2950-S/I-286-S3 *Cincinnati P-70/69 *
SEB 181222 *
MAN N 698-H-LPD *
* Except demulsifying test
32/46/68
DIN 51524/2-3 (HLP/HVLP)AFNOR NFE 48-603 HM/HV
ISO 6743/4 (HV)ISO 11158 (HV)
Vickers M-2950-S/I-286-S3Cincinnati P-68/70/69
Denison HF-0/HF-1/HF-2SEB 181222
Case IH MS 1216MF M-1116 (10W20)
NH 632/646/668
HydraulicFluids
and DifferentialsTransmissions
SAE Grade J306 API Quality Level
MIL
Other specifications
MAXICER TO-4 SAE 30/50SAE 30/50 CF/CF-2
Caterpillar TO-4Allison C-4
Komatsu Micro-ClutchZF TE-ML 01/03
MAXIGEAR FS90 GL4
90 GL4
Komatsu - HanomagZF TE-ML 03E/06K
Transmission/Drive Train Oil (TDTO)
Available in SAE 10W, SAE 30,SAE 50 and SAE 60 viscosities
MAXIGEAR LS90/85W140 GL5
90 (80W90)/85W140GL5 - LS
MIL-L-2105D
MAN 342NMB 235.6
ZF TE-ML 05A/07A/12E/16-B-C-D/17B/19B
MAXIFLUID BBO46/68
MAXICER TO-410W
MAXIFLUID HVSC32
MAXIFLUID POC55 (BLUE)
46
DIN 51524/2-3 (HLP/HVLP)AFNOR NFE 48-603 HM/HV
ISO 6743/4 (HV)ISO 11158 (HV)
Cincinnati P-70SEB 181222
Case IH MS1230MF M-1116 (10W20)Poclain P10032-79V
46/68
DIN 51524/2-3 (HLP/HVLP)AFNOR NFE 48-603 HM/HV
ISO 6743/4 (HV)ISO 11158 (HV)
CEC-L-33-A-93 > 80%ISO 6743/4 - HFDU
Caterpillar BF-1 (46)
Flushing Fluid hydraulic circuit cleaner with low viscosity. Recommended for cleaning hydraulic systems by circulation under a turbulent flow regime. With MASTERCLEAN CL5 excellent results can be obtained without dismantling, ensuring total cleaning of pumps and actuators, even in circuits contaminated with water.MASTERCLEAN CL5 is compatible with all kinds of joints (elastomers) and polymers and is reusable after decantation and filtration after its use.
MASTERCLEAN CL5
32
DIN 51524/2-3 (HLP/HVLP)AFNOR NFE 48-603 HM/HV
ISO 6743/4 (HV)ISO 11158 (HV)
Vickers M-2950-S/I-286-S3SEB 181222
Case IH MS 1216NH 632
SAE 10W
Allison C4API CF/CF-2
ZF TE-ML 01/03
Caterpillar TO-4Case IH MS 1210
Komatsu Micro-Clutch
MAXIGEAR 90 LS PLUS
90GL5 - LS
MIL-L-2105D
LS (Limited Slip)ZF TE-ML 05C/12C/16E
75W90GL4/GL5
MIL-L-2105 D
DAF EATON 2834
IVECO MAN 342 S1/3343 SL
MB 235.8 RENAULT V.I.
ZF TE-ML 05B/12B
75W80GL4
Dexron-II-DAllison C3/C4MAN 339 A/D
Caterpillar TO-2MB 236.1 / 236.7FORD MERCONZF TE-ML 09/11A
75W85GL4
Allison C4Daewoo
Dexron® III-HFORD MERCON®
HyundaiMAN 339 Z1, 339 V1MB 236.1/2/3/5/6/7Mitsubishi SP & SPII
Nissan Matic Fluid C/D/JTASA
VOITH 55.6335VOLVO 97341
ZF TE-ML 02F/03D/04D/11B/14A
MAXIGEAR TS 4500
MAXIFLUID DX II MAXIFLUID DX III MAXIFLUID ATF 3309
75W80GL4
Allison TES 295; TES 389; C3; C4CAT TO-2
FORD FNR5, MERCON®, MERCON®5GM 9986195; DX-II D/E & TASA; DX-III G/H
Hyundai SP-II/SP-IIIMAN 339 Type V-1/ V-2/ Z-2/ Z-3
MB 236.1; MB 236.5; MB 236.6; MB 236.7 (DX-II D); MB 236.9; MB 236.10 (NAG 1/3403); MB 236.11 (LT71141)
DIAMOND SP-II & SP-III, ATF J2Nissan Matic D/J/K
VOITH 55.6335; 55.6336VOLVO 4/6 speed auto. 97340, 97341
ZF TE-ML 02F /05L/04D/09/11B/14A/14B/16L/16M; ZF LifeGuardFluid 5
SAE Grade J306 - API level - ACEA
ALLISON (1)
CATERPILLAR
Other specifications
OTHER SPECIFICATIONSSAE 10W30 - 75W85
API GL-4
C3 (C4)
TO-2
White Farm Q 1826
SAE 10W30 - 75W85API GL-4
C3 (C4)
TO-2
Case NH MAT 3525
SAE 20W40 - 80W90API GL-4
C3 (C4)
TO-2
Komatsu-Hanomag
MAXITRACTOR20W40 FS
MAXITRACTOR10W30 FS
LubricantsMultipurposeUTTO
MAXIFLUID JDCASE IHUTTO-type motor oil MS 1205, MS 1206, MS 1207,
MS 1209, MS 1210, B6MS 1204, MS 1205, MS 1206,
MS 1207, MS 1210, B6
UTTO-type motor oil
Transmissions for tractors and hydraulic elevator equipment ZF TE-ML 03E/05E ZF TE-ML 03E/05E,
ZF TE-ML 06K
Volvo WB 101
JDM J20C JDM J20CJDM J20C
Ford ESN-M2C 86B,Ford ESN-M2C 134D
Ford ESN-M2C 86B,Ford ESN-M2C 134DFord ESN-M2C 134D
NH A2C-201.00
MF 1110, MF 1127, MF 1129A, MF 1135, MF 1141, MF 1143
MF 1135, MF 1143, MF 1145
MF 1135, MF 1143, MF 1145
UTTO-type motor oil
UTTO-type motor oil
UTTO-type motor oil
Hydraulic Fluid
JOHN DEERE
MASSEY FERGUSON
NEW HOLLAND FIATAGRI-FORD
VOLVO
ZF
(1) ALLISON does not allow STOU or UTTO fluids for the lubrication of gearboxes which require quality level ALLISON C4
DOT-4 Brake Fluid
Power Steering Fluid
MAXIFLUID BRAKE meets UNE 26-109-88, DOT-4, ISO 4925, SAE J 1703 ans SAE J 1704 specifications.
INTA Certified. Do not use brake fluids which are not certified by accredited agencies.
MAXIFLUID PSF 11S is especially designed for use in: power steering, height control automatic systems, dampers, hydropneumatic suspensions, stability and traction control systems (ESP, ASR, ...), hydraulic folding roof systems on convertible vehicles, central locking systems, truck cab lifting system, etc.. MAXIFLUID PSF 11S is suitable for use in extreme conditions and guarantees maximum performance system in which is used from -40°C to +130°C.
130ºC
to
160ºC
AKERMANAUSABENATIBOBCATBOMAGCASE - NEW HOLLAND - POCLAINCASE - POCLAINCATERPILLARCLARK MIGHIGANDOOSAN-DAEWOODRESSER - KOMATSUFIAT ALLIS - HITACHI - KOBELCOFURUKAWAHYUNDAIJCBJOHN DEERELIEBHERRMANITOUMASSEY FERGUSONORENSTEIN & KOPPELRAYGO WAGNERSAMSUNGTEREXTIGERVOLVO
40%
to
60%
1,5 At.
to
2,6 At.
Olipes coolants not only exceed these requirements, they also offer the following advantages:Monoethylenglycol base: good biodegradeability NAP free corrosion inhibitors: free of carcinogenic componentsHigh protection of Aluminium and MagnesiumMade from demineralised water:
CIRCUIT PRESSURE MAXIMUM TEMPERATURE RANGEBRANDS CONCENTRATION
Why
is a
coo
lant
needed?
Col
our d
oes not affect
The excess heat generated in engines during combustion has to be evacuated via the cooling circuit. That’s why we need coolants.
Colorants are only an aesthetic-visual property which some manufacturers use to distinguish between coolants of a different nature.
quality
Requirements to be met by a good coolant:Low freezing point – High boiling pointProtection from corrosion (particularly of the Aluminium, Magnesium and their alloys)Protection from cavitation (anti-foam properties)Facilitates leak detectionPossibility of use all the year round
our diluted coolants do not contain heavy metals, Calcium or Magnesium ions, avoiding the formation of scale on the circuit.
DO NOT MIX different kinds of coolant/anti-freeze, as certain additives may inter-react, forming acids compounds which are dangerous for the engine.
Anti-freezeCoolants
ORGANICCONCENTRATE
ORGANIC 50%
FLOW BRILLIt cleans, renovates, shines and protects dashboards, leatherette, plastic seats, roofs and vinyl elements, door panels, glove compartment, bumpers, etc; giving back its original aspect. It avoids dust adherence.
Additives
Greases
MAXIGRAS CADENASSpray lubricant with PTFE specially recommended for chains, bearings, hinges, cables, spindles, threads, gears, rods, rails,
hydraulic pistons, etc. Excellent anticorrosive, antioxidant and antiwear capacity. Compatible with all kind of joins and paints.
MULTI-FLOW PENETRATINGCorrosion-proofing dielectric protector, deblocking, antioxidant, water repellent, formulated to dissolve oxide in seconds and protect all kinds of parts from corrosion, humidity and rust.
• It cleans the injectors and improves fuel flow
• It eliminates water from tank, avoiding sludges and bacteria
• It protects fuel system components
• It lubricates injection system, avoiding damages on the pump
Spray
Grease lithium complex EP. High Temperature.
Blue color. Especially recommended for wheel bearings.
ASTM D4950 “GC-LB”.
Antiseize and antinoise paste with copper for threaded joins and brake caliper
assembling elements.It supports up to +1100ºC.
preventive treatment for Diesel antibacterial shock treatment
the special and definitive solution for Diesel and Biodiesel
• Direct use: no mixtures, no complicated procedures
• Immediate results
• Economic: it allows the utilization of 100% fuel treated
Multipurpose grease lithium EP.Available in NLGI grades 000/00/0/1/2/3. ASTM D4950 “LB”.
Grease Moly EP high performance.Black color. With Molybdenum Disulphide.ASTM D4950 “LB”
Greases classified ASTM D4950 “LB” for use in automotive
Grease classified ASTM D4950 “GC-LB” for use in automotive
COMPLEX EP
ANTISEIZE
C45 EP
46
Vehicle and Workshop Maintenance
Workshop Maintenance
MAXICER PREMIUMLubricant for air compressors.
VDL quality.
OIL ABSORBENTFireproof oil absorbent from sepiolite.
MASTERCLEAN ECOPASTHandwashing paste special for mechanics.With micro-abrasives which reinforce their cleaning action, even run dry.
Degreasers
Hygiene
MASTERCLEAN DESDegreaser, solvent based for washing machines.
MASTERCLEAN BRISPowerful windscreen washer.Direct use.Crystallization starts at -6ºC
with dispenser
MASTERCLEAN HANDHandwashing gel special for mechanics.
MASTERCLEAN BBOBIODEGRADABLES Detergent-degreasers, water based, for handwash or high-pressure washers.
INDUSTRIAL AND MINI ROLLS PULPBlue color.
The information contained in this booklet, based on the experience and knowledge of OLIPES SL in the development and manufacture of lubricants and data provided by the manufacturers (OEM), represents general and non-binding guidelines. OLIPES SL gives no express or implied warranty on the product properties or the suitability for a particular application. The user’s responsibility is to use the products according to their suitability and functionality for the intended application and with due care, according to the instructions of the manufacturer of the vehicle or machinery.
The performance of our products may be affected by a number of factors, including: the specific application, the method of application, operating conditions, the state of lubricated mechanical components prior to application, external contamination, etc. For this reason, it is not possible to make universally valid recommendations or statements about the functionality of our product.
Our products are subject to a process of continuous improvement. OLIPES SL reserves the right to change its product range, its formulations and manufacturing processes, as well as all information contained in this brochure at any time and without notice.
All trademarks, commercial and/or service, mentioned or implied in this catalog are the property of their respective owners. You should not interpret that any product sold or manufactured by OLIPES SL is an original OEM product. They are mentioned solely for information to the user.
With the publication of this booklet will no longer be valid all previous editions. Any form of reproduction requires express prior written permission of OLIPES SL.
© OLIPES SL All rights reserved.