oled4 - file.yizimg.comfile.yizimg.com/171257/2014061309421756.pdfkam043an02 is a amoled display...

OLED4.3

13537695550 - -

1 / 28

Product Name:

Product Code: A0013

Customer

Approved by Customer

Approved Date:

PRODUCT SPECIFICATION KAS-0004-A01

2 / 28

CONTENT

REVISION RECORD .................................................................................................................................................... 3

1 OVERVIEW .......................................................................................................................................................... 4

2 FEATURES ............................................................................................................................................................ 4

3 MECHANICAL DATA ......................................................................................................................................... 4

4 MECHANICAL DRAWING ................................................................................................................................ 5

5 MODULE INTERFACE ....................................................................................................................................... 6

5.1 AMOLED PANEL INTERFACE .................................................................................................................................. 6

6 FUNCTION BLOCK DIAGRAM ....................................................................................................................... 7

7 ABSOLUTE MAXIMUM RATINGS .................................................................................................................. 8

8 ELECTRICAL CHARACTERISTICS ............................................................................................................... 8

8.1 DC ELECTRICAL CHARACTERISTICS ................................................................................................................... 8

8.2 ELECTRO-OPTICAL CHARACTERISTICS ................................................................................................................ 9

8.3 AC ELECTRICAL CHARACTERISTICS ................................................................................................................. 12

9 FUNCTIONAL SPECIFICATION AND APPLICATION CIRCUIT ............................................................ 15

9.1 POWER ON AND POWER OFF SEQUENCE .......................................................................................................... 15

9.2 RECOMMENDED SOFTWARE INITIALIZATION ..................................................................................................... 16

10 PACKAGE SPECIFICATION ........................................................................................................................... 20

11 RELIABILITY .................................................................................................................................................... 21

12 OUTGOING QUALITY CONTROL SPECIFICATIONS .............................................................................. 22

12.1 SAMPLING METHOD .......................................................................................................................................... 22

12.2 INSPECTION CONDITIONS .................................................................................................................................. 22

12.3 QUALITY ASSURANCE ZONES ............................................................................................................................ 22

12.4 INSPECTION STANDARD ..................................................................................................................................... 23

13 PRECAUTIONS FOR OPERATION AND STORAGE .................................................................................. 28

13.1 PRECAUTIONS FOR OPERATION ......................................................................................................................... 28

13.2 SOLDERING ....................................................................................................................................................... 28

13.3 PRECAUTIONS FOR STORAGE ............................................................................................................................. 28


- 3 / 28

REVISION RECORD

REV. REVISION DESCRIPTION REV. DATE REMARK

A01 Initial Release 2013-11-22


- 4 / 28

1 Overview

KAM043AN02 is a AMOLED display module with 540×RGB×960 dot matrix. The characteristics of this

display module are high brightness, self-emission, high contrast ratio, slim/thin outline, wide viewing angle,

wide temperature range, and low power consumption.

2 Features

Display Color: Full Color (16.7M)

Dot Matrix: 540×RGB×960

Interface: MIPI 2lane

Wide range of operating temperature: -40℃ to 85℃

3 Mechanical Data

NO. ITEM SPECIFICATION UNIT

1 Dot Matrix 540×RGB×960 -

2 Dot Pitch 0.033(W)×0.099(H) mm

3 Active Area 53.46 (W)×95.04 (H) mm

4 Module Size 57.26(W)×103.87(H)×1.11(T) mm

5 Diagonal A/A Size 4.3 inch

6 Module Weight 12.8 gram


5 / 28

4 Mechanical Drawing

13537695550


- 6 / 28

5 Module Interface

5.1 AMOLED Panel Interface

PIN NO. PIN NAME DESCRIPTION 1 ELVDD AMOLED power positive

2 ELVDD AMOLED power positive

3 ELVSS AMOLED power negative

4 ELVSS AMOLED power negative

5 IOVDD Power supply for I/O

6 AVDD Power supply for analog

7 MTP MTP pin , No connection

8 RES Reset signal

9 TE Vsync signal output from the panel to avoid tearing effect

10 NC No connection

11 NC No connection

12 GND Ground signal


14 DSI_D0N MIPI data negative signal

15 DSI_D0P MIPI data positive signal


17 DSI_CLKN MIPI clock negative signal

18 DSI_CLKP MIPI clock positive signal


20 DSI_D1N MIPI data negative signal

21 DSI_D1P MIPI data positive signal


23 SWIRE Swire protocol setting pin of power IC, if not used, open this pin


7 / 28

6 Function Block Diagram


- 8 / 28

7 Absolute Maximum Ratings

ITEM SYMBOL MIN MAX UNIT REMARK

Input Power Supply IOVDD -0.3 5.5 V -

Analog Power Supply AVDD -0.3 5.5 V -

Operating Temp. Topr -40 85 ℃ -

Storage Temp Tstg -55 105 ℃ -

Note (1): All of the voltages are on the basis of “VSS = 0V”.

Note (2): Permanent breakage of module may occur if the module is used beyond the maximum rating. The

module can be normal operated under the conditions according to Section 8 “Electrical

Characteristics”. Malfunctioning of the module may occur and the reliability of the module may

deteriorate if the module is used beyond the conditions.

8 Electrical Characteristics

8.1 DC Electrical Characteristics

ITEM SYMBOL TEST

CONDITION MIN TYPE MAX UNIT

IOVDD Power Supply IOVDD 22±3C,

55±15%R.H 1.65 1.8 AVDD V

IOVDD Power Supply AVDD 22±3C,

55±15%R.H 2.5 2.85 3.6 V

ELVDD power supply ELVDD 22±3C,

55±15%R.H 4.54 4.6 4.66 V

ELVSS power supply ELVSS 22±3C,

55±15%R.H -3.78 -4.4 -4.44 V

High-level Input Voltage VIH - 0.8×IOVDD - - V

Low-level Input Voltage VIL - - - 0.2×IOVDD V

High-level Output Voltage VOH - 0.8×IOVDD - - V

Low-level Output Voltage VOL - - - 0.2×IOVDD V


- 9 / 28

8.2 Electro-optical Characteristics

8.2.1 Current consumption

ITEM SYMBOL TEST

CONDITION MIN TYP. MAX UNIT REMARK

Panel Power PNL

ELVDD=4.6V

ELVSS=-4.4V

- 418 1255 mW Note1

INL - 46.5 139.5 mA Note1

IC

Normal

PAVDD

AVDD=2.85V

IOVDD=1.8V

- 65.12 85.5 mW Note2

IAVDD - 22.85 30 mA Note2

PIOVDD 18.5 23.2 27.8 uW Note2

IIOVDD 9.8 12.3 14.7 uA Note2

Stand-by PS 2.0 2.5 3.0 mW Note2

Deep

Stand-by PD 0.02 0.03 0.036 mW Note3

Note 1: Typ value of panel power is tested at 30% typical brightness.

Note 2: Tested in white pattern

Note 3: Display off

8.2.2 Optical specifications

ITEM SYMBOL TEST

CONDITION MIN TYP MAX UNIT REMARK

Response

time

Rise Tr θ=0°

- - 1 ms Note 4

Fall Tf - - 1 ms

Contrast

Ratio CR - θ=0° 5000 10000 - - Note 5

Gamma - - 1.9 2.2 2.5 - -

Crosstalk % - - - 5% - -

Flicker DB 53-63Hz - - -30 - -

NTSC % θ=0° 90 98 - -

Viewing

Angle

Top

- CR≧200

70 - -

Deg. Note 7 Bottom 70 - -

Left 70 - -

Right 70 - -

Brightness w/TP YL θ=0°Display:white

200 250 300 cd/m² Note 4

Liminance Uniform UL 70 - - % Note 6

chromaticity

Wx

- θ=0°

0.290 0.310 0.330

- Note 8

Wy 0.300 0.320 0.340

Rx 0.631 0.661 0.691

Ry 0.308 0.338 0.368

Gx 0.186 0.236 0.286

Gy 0.660 0.710 0.760

Bx 0.094 0.134 0.174

By 0.020 0.060 0.100


- 10 / 28


- 11 / 28


- 12 / 28

8.3 AC Electrical Characteristics


- 13 / 28


14 / 28


15 / 28

9 Functional Specification and Application Circuit

9.1 Power ON and Power OFF Sequence

Power ON Sequence:

Power OFF Sequence:

13537695550


16 / 28

9.2 Recommended Software Initialization


17 / 28


18 / 28


19 / 28


20 / 28

10 Package Specification

fix trays with tape

( 3 )

normal

1

( 2 )

180° revers

2

A0010-MT1-A

( 1 )Tray Type：

TRAY

Packing Process(1)~(9)

order 1、 2、 1、 2

*5

small carton package

( 9 )

2 small cartons in 1 big carton

Package finished

( 8 )

( 4 )

( 7 )

( 6 )

( 5 )

R

ROHS MARK

ROHS MARK

ROHS MARK

NOTE:1、

The inner carton and master carton must be sealed with

2、

Fill up the gap with tray.

3、

If the customer has special needs with the RoHS making,

the inner carton and master carton need adhesive new RoHS

adhesive tape.

marking at .

96 pcs of 1 small carton

1 tray contain 6 pcs

16 contained trays, 1 empty tray

of desiccant into the

the tray and add 5 bags

Use vaccum bag to package

32 contained trays, 2 empty

trays,

Package quantity products:

192 pcs of 1 big carton

Controlled SealDetail A

A

vacuum bag

After tray be packaged,

wrap the package in a

bubble bag and seal with

scoth tape.

Dots:128*32

1.04"

L390*W290*L120 mm

L410*W310*L272 mm


21 / 28

11 Reliability


22 / 28

12 Outgoing Quality Control Specifications

12.1 Sampling Method

(1) GB/T 2828.1-2003/ISO2859-1：1999, inspection level Ⅱ, normal inspection, single sample

inspection

(2) AQL: Major 0.65; Minor 1.0

12.2 Inspection Conditions

The environmental conditions for test and measurement are performed as follows.

Temperature: 22±3C

Humidity: 55±15%R.H

Fluorescent Lamp: 30W

Distance between the Panel & Lamp: ≥50cm

Distance between the Panel & Eyes: ≥30cm

Viewing angle from the vertical in each direction: ≤45°

(See the sketch below)

≥30cm≥50cm≤45°

Panel

eyes

12.3 Quality Assurance Zones

Zone C: Cap Area

Zone B: Viewing Area

Zone A: Active Area PANEL


23 / 28

12.4 Inspection Standard

Ⅰ. Scratches and extraneous substances


24 / 28


25 / 28

Ⅱ. Glass broken and chipping


26 / 28


27 / 28

PRODUCT A SPECIFICATION K S-0004-A01

28 / 28

13 Precautions for operation and Storage

13.1 Precautions for Operation

(1) Since OLED panel is made of glass, do not apply any mechanical shock or impact or excessive

force to it when installing the OLED module. Any strong mechanical impact due to falling

dropping etc. may cause damage (breakage or cracking).

(2) The polarizer on the OLED surface is made of soft material and is easily scratched. Please take

most care when handing. When the surface of the polarizer of OLED Module is contaminated,

please wipe it off gently by using moisten soft cloth with isopropyl alcohol, do not use water,

ketone or aromatics. If there is saliva or water on the OLED surface, please wipe it off

immediately.

(3) When handling OLED module, please be sure that the body and the tools are properly grounded.

And do not touch I/O pins with bare hands or contaminate I/O pins, it will cause disconnection or

defective insulation of terminals.

(4) Do not attempt to disassemble or process the OLED module.

(5) OLED module should be used under recommended operating conditions shown in the

specification. Since the higher voltage leads to the shorter lifetime, be sure to use the specified

operating voltage.

(6) Foggy dew, moisture condensation or water droplets deposited on surface and contact terminals

will cause polarizer stain or damage, the deteriorated display quality and electrochemical reaction

then leads to shorter life time and permanent damage to the module probably. Please pay attention

to the environmental temperature and humidity.

(7) An afterimage is created by the difference in brightness between unused dot and the fixed dot,

according to the decrease of brightness of the emitting time. Therefore, to avoid having an

afterimage, the full set should be thoroughly used instead of using a fixed dot. When the fixed dot

emits, an afterimage can be created.

(8) Flicker could be come out at full on display. And it disappears when frame frequency increase, but

brightness decreases too.

13.2 Soldering

(1) Soldering should be performed only on the I/O terminals.

(2) Use soldering irons with proper grounding and no leakage.

(3) Iron: no higher than 300℃ and 3~4 sec during soldering.

13.3 Precautions for Storage

(1) Please store OLED module in a dark place. Avoid exposure to sunlight, the light of fluorescent

lamp or any ultraviolet ray.

(2) Keep the environment temperature between 10℃ and 35℃ and the relative humidity less than

60%. Avoid high temperature and high humidity.

(3) Keep the OLED modules stored in the container when shipped from supplier before using them is

recommended.

(4) Do not leave any article on the OLED module surface for an extended period of time.

.

oled4 - file.yizimg.comfile.yizimg.com/171257/2014061309421756.pdfkam043an02 is a amoled display...

Documents