offset parameters
DESCRIPTION
fanucTRANSCRIPT
-
Offset Parameters
Before Zeroing Axes 1 through 6
You need to make sure that there are no offsets in the parameter for zero master. To do
this Goto the System Variable Screen (MENU-0-6)
Then Scroll down to Item 413 PARAM_GROUP and press F2(DETAIL)
-
Offset Parameters
Press F2 (DETAIL) Again
Scroll down to Item 38 (MASTER_POS) and Press F2(DETAIL)
-
Offset Parameters
Refer to the offset Matrix for values
Ext Axes are set in the control start setup
Once in this screen, make sure that all Axes have the correct offsets in them.