official journal of the patent office -...

The Patent Office Journal 03/02/2017 2569

OFFICIAL JOURNAL

OF

THE PATENT OFFICE

. 05/2017 : 03/02/2017 ISSUE NO. 05/2017 FRIDAY DATE: 03/02/2017

PUBLICATION OF THE PATENT OFFICE


INTRODUCTION

In view of the recent amendment made in the Patents Act, 1970 by the Patents (Amendment) Act, 2005

effective from 01st January 2005, the Official Journal of The Patent Office is required to be published under

the Statute. This Journal is being published on weekly basis on every Friday covering the various proceedings

on Patents as required according to the provision of Section 145 of the Patents Act 1970. All the enquiries on

this Official Journal and other information as required by the public should be addressed to the Controller

General of Patents, Designs & Trade Marks. Suggestions and comments are requested from all quarters so that

the content can be enriched.

( Om Prakash Gupta ) CONTROLLER GENERAL OF PATENTS, DESIGNS & TRADE MARKS

3rd

FRBRUARY, 2017


CONTENTS

SUBJECT PAGE NUMBER

JURISDICTION : 2572 2573

SPECIAL NOTICE : 2574 2575

EARLY PUBLICATION (DELHI) : 2576 2584

EARLY PUBLICATION (MUMBAI) : 2585 2598

EARLY PUBLICATION (CHENNAI) : 2599 2611

PUBLICATION AFTER 18 MONTHS (DELHI) : 2612 2809

PUBLICATION AFTER 18 MONTHS (MUMBAI) : 2810 2869

PUBLICATION AFTER 18 MONTHS (CHENNAI) : 2870 3036

PUBLICATION AFTER 18 MONTHS (KOLKATA) : 3037 3049

PUBLICATION UNDER SECTION 43(2) IN RESPECT OF

THE GRANT (DELHI)

: 3050 3062


THE GRANT (MUMBAI)

: 3063 3067


THE GRANT (CHENNAI)

: 3068 3074


THE GRANT (KOLKATA) : 3075 3081

INTRODUCTION TO DESIGN PUBLICATION : 3082

CANCELLATION PROCEEDINGS UNDER SECTION 19 OF

THE DESIGNS ACT, 2000 & DESIGNS (AMENDMENT)

RULES, 2008

: 3083 3084

REGISTRATION OF DESIGNS : 3085 - 3139


THE PATENT OFFICE KOLKATA, 03/02/2017

Address of the Patent Offices/Jurisdictions

The following are addresses of all the Patent Offices located at different places having their Territorial

Jurisdiction on a Zonal basis as shown below:- 1 Office of the Controller General of Patents,

Designs & Trade Marks, Boudhik Sampada Bhavan, Near Antop Hill Post Office,S.M.Road,Antop Hill, Mumbai 400 037

Phone: (91)(22) 24123311, Fax : (91)(22) 24123322 E-mail: [email protected]

4 The Patent Office, Government of India, Intellectual Property Rights Building, G.S.T. Road, Guindy, Chennai 600 032. Phone: (91)(44) 2250 2081-84 Fax : (91)(44) 2250 2066 E-mail: [email protected]

The States of Andhra Pradesh, Telangana, Karnataka, Kerala, Tamil Nadu and the Union Territories of Puducherry and Lakshadweep.

2 The Patent Office, Government of India, Boudhik Sampada Bhavan, Near Antop Hill Post Office,S.M.Road,Antop Hill,

Mumbai 400 037 Phone: (91)(22) 24137701 Fax: (91)(22) 24130387

E-mail: [email protected] The States of Gujarat, Maharashtra, Madhya

Pradesh, Goa and Chhattisgarh and the Union Territories of Daman and Diu & Dadra and Nagar Haveli

5

The Patent Office (Head Office), Government of India, Boudhik Sampada Bhavan, CP-2, Sector V, Salt Lake City, Kolkata- 700 091 Phone: (91)(33) 2367 1943/44/45/46/87 Fax: (91)(33) 2367 1988 E-Mail: [email protected]

Rest of India 3

The Patent Office, Government of India, Boudhik Sampada Bhavan, Plot No. 32., Sector-14, Dwarka, New Delhi 110075 Phone: (91)(11) 25300200 & 28032253 Fax: (91)(11) 28034301 & 28034302 E.mail: [email protected]

The States of Haryana, Himachal Pradesh, Jammu and Kashmir, Punjab, Rajasthan, Uttar Pradesh, Uttaranchal, Delhi and the Union Territory of Chandigarh.

Website: www.ipindia.nic.in www.patentoffice.nic.in All applications, notices, statements or other documents or any fees required by the Patents Act, 1970

and The Patents (Amendment) Act, 2005 or by the Patents (Amendment) Rules, 2006 will be received

only at the appropriate offices of the Patent Office. Fees: The Fees may either be paid in cash or may be sent by Bank Draft or Cheques payable to the Controller of

Patents drawn on a scheduled Bank at the place where the appropriate office is situated.

mailto:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]://www.ipindia.nic.in/


, 03/02/2017

:- 1 : , ,

, , . . , , - 400 037, , : (91) (22) 24123311 : (91) (22) 24123322 . : [email protected]

4 , , , . . . , - 600 032. : (91)(44) 2250 2081-84 : (91)(44) 2250-2066 . : [email protected]

, , , , ,

2 , , , . . , , - 400 037, : (91) (22) 24137701 : (91) (22) 24130387 . : [email protected]

, , , , , .

5 , , ( ) , -2, - V, , -700 091, . : (91)(33) 2367 1943/44/45/46/87 :/Fax: (91)(33) 2367 1988 . : [email protected]

3 , , . 32, - 14, , - 110 075. : (91)(11) 25300200, 28032253 : (91)(11) 28034301, 28034302 . : [email protected] , , , ,, , ,

: http://www.ipindia.nic.in www.patentoffice.nic.in

, 1970 () , 2005 () , 2006 , , : Controller of Patents

mailto:[email protected]:[email protected]:[email protected]://www.ipindia.nic.in/


SPECIAL NOTICE

18 Months publication as required under Section 11A of the Patents Act, 1970

as amended by the Patents (Amendment) Act, 2005.

Notice is hereby given that any person at any time before the grant of Patent may give representation by way of

opposition to the Controller of Patents at appropriate office on the ground and in a manner specified under

section 25(1) of the Patents (Amendment) Act, 2005 read with Rule 55 of the Patents (Amendment) Rules,

2006.

Notice is also given that if any interested person requests for copies of the complete specification, drawing and

abstract of any application already published, the photocopy of the same can be supplied by the Patent Office as

per the jurisdiction on payment of prescribed fees of Rs.8/- per page. If any further details are required to be

obtained, the same can be provided by the respective Patent Offices on request.

(Om Prakash Gupta) CONTROLLER GENERAL OF PATENTS, DESIGNS & TRADE MARKS


SPECIAL NOTICE

Under the new provision of the Patents Act, 1970 as amended by the Patents (Amendment) Act, 2005

and Rules there under, Publication of the matter relating to Patents in the Official Gazette of India Part III,

Section 2 has been discontinued and instead The Official Journal of the Patent Office is being published

containing all the activities of The Patent Office such as publication of all the patent applications after 18th

months , grant of patents & all other information in respect of the proceedings as required under the provisions

of the Patents (Amendment) Act, 2005 and Rules thereunder on weekly basis on every Friday.

The Journal is uploaded in the website every Friday. So Paper form and CD-ROM form of the Journal are

discontinued from 01/01/2009.

SPECIAL NOTICE

Every effort is being taken to publish all the patent applications under section 11(A) of the Patents Act.

However, if duplication of publication of any application is found, then earlier date of publication will be taken

for the purpose of provisional protection for applicant and Patent Office will grant Patent not before six months

from the date of second publication, provided that there is there is no third party representation.


Early Publication: The following patent applications have been published under section 11A (2) of The Patents (Amendment) Act 2005 and rule

24A of The Patents (Amendment) Rules, 2006. Any person may file representation by way of opposition to the Controller of

Patents at the appropriate office against the grant of the patent in the prescribed manner under section 25(1) of the Patents

(Amendment) Act 2005 read with the rule 55 of The Patents (Amendment) Rules, 2006:

(12) PATENT APPLICATION PUBLICATION (21) Application No.201711001223 A

(19) INDIA

(22) Date of filing of Application :11/01/2017 (43) Publication Date : 03/02/2017

(54) Title of the invention : V-LOCK SHELVING SYSTEM FOR STORAGE OF RETAIL GOOD AND BOTTLES

(51) International classification :B65D85/62

(31) Priority Document No :NA

(32) Priority Date :NA

(33) Name of priority country :NA

(86) International Application No

Filing Date

:NA

:NA

(87) International Publication No : NA

(61) Patent of Addition to Application Number

Filing Date

:NA

:NA

(62) Divisional to Application Number

Filing Date

:NA

:NA

(71)Name of Applicant :

1)MEDERATA, Vickram Address of Applicant :1209, DLF Tower - B, Jasola District

Centre, New Delhi - 110025, India. Delhi India

(72)Name of Inventor :

1)MEDERATA, Vickram

(57) Abstract :

The present application is directed to V-lock shelving system for storage of retail good and bottles. Aspects of the present disclosure

relate to a shelf having at least one V-shaped shelf, formed independently and separately, having two plates, a first plate and a second

plate, respectively, connected together by an interlocking mechanism, wherein the first plate having at least two locking extension

points and the second plate having at least two insertion points such that at least one locking extension point from the at least two

locking extension points is adapted to interlock with at least one insertion point of the at least two insertion points by making an

appropriate angle.

No. of Pages : 17 No. of Claims : 12



(19) INDIA


(54) Title of the invention : A SYSTEM FOR TRANSMITTING AIRCRAFT DATA TO GROUND STATION(S) VIA ONE OR

MORE COMMUNICATION CHANNELS

(51) International classification :G08G5/00





Filing Date

:NA

:NA



Filing Date

:NA

:NA


Filing Date

:NA

:NA


1)HCL Technologies Limited Address of Applicant :B-39, Sector 1, Noida 201 301, Uttar

Pradesh, India Uttar Pradesh India


1)SUNDARARAJ, Jayaramakrishnan

2)DEY, Sourav

3)VINAYAGAM, Senthilkumar

(57) Abstract :

Disclosed is a Central Aircraft Network System (CANS) (102) for transmitting data, associated with an aircraft, to a ground station via

one or more communication channels. A data receiving module (212) receives data from at least one data source. An AIDPS (214)

determines priority information pertaining to the data. In one aspect, the priority information may be determined by analyzing the data

and a predefined data pattern model. An ICSMS (216) determines one or more communication channels, of a plurality of

communication channels, to be used for transmitting the data. The ICSMS (216) further establishes the one or more communication

channels between the aircraft and a ground station in order to transmit the data to the ground station via the one or more

communication channels.




(19) INDIA


(54) Title of the invention : SENSOR CONTROLLED SIDE STAND LIFTER MECHANISM FOR BIKE

(51) International classification :B62H1/00





Filing Date

:NA

:NA



Filing Date

:NA

:NA


Filing Date

:NA

:NA


1)ABUZAR MUSTAFA Address of Applicant :DEPARTMENT OF MECHANICAL

ENGINEERING, ALIGARH MUSLIM UNIVERSITY,

ALIGARH-202002, U.P., INDIA Uttar Pradesh India

2)MOHAD ANAS

3)DR.SALEEM ANWAR KHAN (72)Name of Inventor :

1)ABUZAR MUSTAFA

2)MOHAD ANAS

3)DR. SALEEM ANWAR KHAN

(57) Abstract :

The side stand is used for supporting a parked motorcycle. If rider forgets to retract the side stands before driving, then the non-

retracted stand may hit the ground and disturbs the riders control during the turn which ultimately can lead to an accident. Now a days

some new methods are used to ensure that stand is in released condition. The motorcycle side stand consists of a metallic stand and

helical spring. Some side stand retracts by themself when the motorcycle is dislocate from its support, some others are fit with

electrical mechanism, warning devices like buzzers or special retracting mechanism. They are provided with the spring that pulls it

back into position to ensure extra safety. Our proposed automatic lifting mechanism for side stand is to provide a foolproof system to

lift the stand when the bike starts to move in case it is somehow still in non-retracted position and therefore to reduce the accident

which takes place due to non-retracted side stand. The present invention consists of servo motor which is powered by motorcycles 12v

battery. Connected to the microprocessor which commands servo motor to lift the stand. The motor is actuated by the speed sensor

which is mounted on the front of the wheel of most of the bikes having digital dash board. This is a new type of side stand mechanism,

which automatically retracts the side stand through some mechanical and electronic arrangement. The main components of this system

are microcontroller, speed sensor, dc battery & servomotor. The speed sensor senses the rotation of the wheel and sends the signal in

form of electrical to the microcontroller which interprets these signals and sends command to actuate the servo motor which is used to

provide a 90 degrees motion to lift the stand. This mechanism is easy to use and chances of error are very less. The emphasis is on

commercial use of this side stand lifter mechanism as it has very vast market. Because digital sensor are already preinstalled in most

of bikes now available in market which makes this mechanism cheaper for its installation price for any company or any individual.

With slightly change in stand design, the only things that are required are 5> servomotor or actuator & a microcontroller. Therefore it

is cost effective and reliable. In addition, components that need to be installed require very less space and are very light weight.

These small additions makes rider journey comfortable and insure their safety from accidents very cost effective way.




(19) INDIA


(54) Title of the invention : ROBOTIC DEVICES AND SYSTEMS FOR PERFORMING SINGLE INCISION PROCEDURES AND

NATURAL ORIFICE TRANSLUMENAL ENDOSCOPIC SURGICAL PROCEDURES AND METHODS OF CONFIGURING

ROBOTIC DEVICES AND SYSTEMS

(51) International classification :A61B17/29

(31) Priority Document No :14/693207

(32) Priority Date :22/04/2015

(33) Name of priority country :U.S.A.


Filing Date

:PCT/CN2016/076376

:15/03/2016

(87) International Publication No :WO 2016/169360

(61) Patent of Addition to Application

Number

Filing Date

:NA

:NA


Filing Date

:NA

:NA


1)BIO MEDICAL ENGINEERING (HK) LIMITED Address of Applicant :2nd Floor Shun Ho Tower 24 30 Ice

House Street Central Hong Kong China


1)YEUNG Chung Kwong

(57) Abstract :

A surgical system (200) includes a port assembly (210) and an instrument arm assembly (230). The port assembly (210) has a first end

section (212) and a second end section (214). The first end section (212) includes a first end channel (212a) and a first gate assembly

(212b). The second end section (214) includes a second end channel (214a) a second gate assembly (214b) and an anchor port (216).

The first and second gate assemblies (212b 214b) could make the transition between an open position to allow the access through the

first and second end channels (212a 214a) respectively and a closed position to prevent the access. The instrument arm assembly (230)

includes a shoulder section (231) securable to the anchor port a first arm section (233) secured to the shoulder section (231) an elbow

section (234) secured to the first arm section (233) a second arm section (235) secured to the elbow section (234) a wrist section (236)

secured to the second arm section (235) and an end effector section (238) secured to the wrist section (236). A port assembly for use in

a surgical system and a method of configuring a surgical system are also provided.




(19) INDIA


(54) Title of the invention : TEACHING MANNERS TO MACHINES: A METHOD FOR ETHICS-AWARE TECHNOLOGY.

(51) International classification :G09B7/02





Filing Date

:NA

:NA



Filing Date

:NA

:NA


Filing Date

:NA

:NA


1)SHOLLA SAHIL, Address of Applicant :COMPUTER SCIENCE, NIT

SRINAGAR,HAZRATBAL,SRINAGAR,J&K,190006,INDIA

Jammu & Kashmir India

2)MIR ROOHIE NAAZ,

3)CHISHTI MOHAMMAD AHSAN (72)Name of Inventor :

1)SHOLLA SAHIL,

2)MIR ROOHIE NAAZ

3)CHISHTI MOHAMMAD AHSAN

(57) Abstract :

It is a common practice that the working of a machine/thing/device/software only concerns itself with the functional requirements.

Machine/thing/device/software are treated as standalone systems disconnected from the moral, ethical, legal, cultural, regional context

or management policies in which they operate. This results in a situation where essential human values such as loss of life, prevention

of (serious) physical injury, human dignity, respect, privacy, honour etc are at the risk of being jeopardised because such concerns are

not taken into consideration. We propose a method by which we can incorporate moral, ethical, legal, cultural, regional context or

management policies applicable in the context of a Machine/thing/device/software in the hardware/software of the system. We

illustrate our method by implementing two ethics theories on the knife that we call Ethics-Aware Knife: A Knife that does not hurt!




(19) INDIA


(54) Title of the invention : TEMPERATURE SENSING DEVICE FOR AUTOMOTIVE VEHICLE

(51) International classification :G08B23/00





Filing Date

:NA

:NA



Filing Date

:NA

:NA


Filing Date

:NA

:NA


1)JAY ACE TECHNOLOGIES LIMITED Address of Applicant :GI-48 GT KARNAL ROAD

INDUSTRIAL AREA, DELHI-10033 INDIA Delhi India


1)RAJESH SINGH

2)ARUN KUMAR SHARMA

3)SAVITA KANDOLA

(57) Abstract :

The present subject matter relates to a temperature sensing device fitted in automotive vehicles that comprises of a battery operating

with an electronic circuit structure wherein the electronic circuit structure includes a thermistor positioned beside an electrical

controller to sense the internal temperature of the electrical controller. The thermistor generates analog input signals in terms of

thermistor resistance corresponding to the sensed temperature which are conveyed to a microcontroller provided to receive and

compare the electrical signal to a reference voltage via an interphase circuit to accordingly operate the e-rickshaw and subsequently to

trigger the warning indicator of the heat rise indicator via a light emitting diode provided in a vehicle information display instrument

of the vehicle.



(12) PATENT APPLICATION PUBLICATION (21) Application No.2234/DEL/2015 A

(19) INDIA


(54) Title of the invention : SYSTEM AND METHOD FOR EXTINGUISHING FIRE IN RAIL COACHES

(51) International classification :A62C37/48





Filing Date

:NA

:NA



Filing Date

:NA

:NA


Filing Date

:NA

:NA


1)RAJNI Address of Applicant :VPO JANDWAL,TEHSIL AND

DISTRICT PATHANKOT,PUNJAB-145 001, INDIA Punjab

India


1)RAJNI

(57) Abstract :

Disclosed herein an efficient and cost effective system and method for extinguishing the fire in rail coaches. The system according to

the invention is developed using available resources in the coach such as water tank and wherein the system arrangement is been done

in a manner to enable the train passengers or driver or guard to extinguish the fire almost immediately even without any outside help.




(19) INDIA


(54) Title of the invention : AN ELECTRICAL CIRCUIT USED TO PERVENT RE-IGNITION OF VEHICLE & PROTECTION OF

GEARBOX AND ENGINE.

(51) International classification :F02N11/08





Filing Date

:NA

:NA



Filing Date

:NA

:NA


Filing Date

:NA

:NA


1)GURSEERAT SINGH MEEN Address of Applicant :29, TYPE-6, POWER COLONY,

G.H.T.P, LEHRA MOHABAT - 151111, DISTRICT-

BATHINDA, PUNJAB, INDIA. Punjab India


1)GURSEERAT SINGH MEEN

(57) Abstract :

This invention relates an electrical equipment preventing re-ignition of vehicle comprising a Microprocessor and plurality of sensors

to measure difference in voltages (idling & running). It is associated with the following;advantageous features: - Preventing of re-

ignition of vehicle in any case/until the car engine is completely shut down - Compact design Cost effective - Can be fitted in any

vehicle




(19) INDIA


(54) Title of the invention : SYSTEM AND METHOD FOR CREATING A TEST APPLICATION

(51) International classification :G06F9/44

(31) Priority Document No :14/965,838


(33) Name of priority country :U.S.A.


Filing Date

:NA

:NA



Filing Date

:NA

:NA


Filing Date

:NA

:NA


1)Appy Pie LLP Address of Applicant :Plot No. 165, NSEZ Noida Uttar

Pradesh 201305 Uttar Pradesh India


1)GIRDHAR, Abhinav

2)RAWAT, Subhash

(57) Abstract :

System and method for creating a test application are disclosed. The application includes a test application. Input data is received from

a user at a development platform. The input data corresponds to a web application designed by a user. The user provides

customization options through the input data. The user may customize the design of the web application during development. An

automated script is utilized to fetch the input data from a server and modify the input data into a predefined format. Executable files

are created from the input data in a predefined format according to the preferences of the user. The executable files are created by a

scripting language. The executable files are uploaded at the server and are run for generating testing application. The user may

download (install) the testing app from the server. Figure 4




(19) INDIA


(54) Title of the invention : MOVING FILAMENT YARN BULK MEASURING DEVICE

(51) International classification :D01H13/26, G01N33/36,





Filing Date

:NA

:NA



Number

Filing Date

:NA

:NA


Filing Date

:NA

:NA


1)Dr. P.V.Kadole Address of Applicant :DKTE's TEXTILE AND

ENGINEERING INSTITUTE Rajwada, Post Box no. 130,

Ichalkaranji-416 115, Dist.- Kolhapur Maharashtra , India

Maharashtra India

2)Mr. Atul J. Dhavale

3)Mr. Suhas D Gokhale (72)Name of Inventor :

1)Dr. P.V.Kadole

2)Mr. Atul J. Dhavale

3)Mr. Suhas D Gokhale

(57) Abstract :

The primary objective of this invention is to provide a method for measuring yarn bulk continuously and automatically on a moving

yarn without destructive contact therewith. This objective is achieved by a method that includes passing a continuous length of yarn

under minimum vibration and constant tension through a laser beam . When yarn is passing through optical sensor like laser, the

amount of light received by detector is directly proportional to volume or bulk of yarn. The output signals of the sensors is amplified

and processed with the help of signal conditioning circuit .If it is allowed to pass through capacitor due to change in dielectric the

value of capacitor changes . This change is proportional to volume or bulk of yarn. After gathering the information from optical sensor

the output is calibrated in terms of percentage bulk. On the similar lines the change in the capacitance can also be calibrated in terms

of percentage bulk. For mathematical processing microcontroller is used . This calibrated value of bulk can be inter phased with PC

with the help of serial interfacing device.




(19) INDIA


(54) Title of the invention : Solar Powered Online Transmission Line Monitoring Using Wireless Embedded System

(51) International classification :G08C17/02, G01B11/16





Filing Date

:PCT// /

:01/01/1900



Number

Filing Date

:NA

:NA


Filing Date

:NA

:NA


1)Dr. P. V. Kadole Address of Applicant :DKTE's TEXTILE AND

ENGINEERING INSTITUTE Rajwada, Post Box no. 130,

Ichalkaranji-416 115, Dist.- Kolhapur Maharashtra , India

Maharashtra India

2)Dr. S. A. Patil

3)Prof. V. B. Sutar (72)Name of Inventor :

1)Dr. S. A. Patil

2)Prof. V. B. Sutar

3)Mr. Shubham S. Powar

4)Mr. Suraj H. Raut

(57) Abstract :

Now a days due to increase in demand of electricity for entire applications in any country, need to produce consistently with advanced

and smart monitoring system for protection. Various protection systems are available based on the volume of power distributed and

often change in the load without prediction which required an advanced and smart communication based systems to monitor the

electrical parameters of the transmission line. Most of the existing systems are reliable on various applications but not perfect for

electrical applications. Electrical environment will have lots of disturbance in nature, due to natural disasters like storms, cyclones or

heavy rains transmission and distribution lines may lead to damage. The transmission line may cut and fall on ground, this leads to

very harmful for human beings and may become fatal. So, a rigid, reliable and robust communications network like CDMA/ GSM

technology instead of many communication techniques used earlier. This invention enhances speed of communication with distance

independency and the technology saves human life from this electrical danger by providing the fault detection and monitoring and also

conveys the message to the electricity board to clear the fault. An embedded based hardware design is invented and sensing modules

acquire data from electrical sensing system. A powerful mobile networking is designed to send data from a network to other network.

in this invention any change in parameters of transmission line is sensed to protect the entire transmission and distribution.




(19) INDIA


(54) Title of the invention : DETACHABLE GARBAGE CLEANER AND A VEHICLE OPERATING THEREON

(51) International classification :B08B3/00, B08B9/00





Filing Date

:NA

:NA



Number

Filing Date

:NA

:NA


Filing Date

:NA

:NA


1)SOLANKI, Gulab Singh Address of Applicant :House No. 869, Near Kargil Chowk,

Sunder Nagar, Raipur, Chhattisgarh - 492013 India. Chattisgarh

India


1)SOLANKI, Gulab Singh

2)SOLANKI, Mohit

(57) Abstract :

Aspects of the present disclosure generally relate to the technical field of garbage cleaning. In particular, the present disclosure

pertains to a garbage cleaner that can be readily compatible with different pulling and/or collecting means for operations related

thereto. In an aspect, it provides a vehicle 100 that operates on a detachable garbage cleaner 120, the vehicle 100 can include a pulling

unit 110 to drive the vehicle 100; and a collecting unit 130, wherein the detachable garbage cleaner 120 has means to operatively

connect to the pulling unit 110, and to the collecting unit 130; wherein the detachable garbage cleaner 120 can include a cleaner unit

120-1 configured with a stopper 126 to collect garbage from a surface; and a carrying unit 120-2 configured to carry the garbage

before dropping onto the collecting unit 120-2.




(19) INDIA


(54) Title of the invention : STANDARDIZATION OF THREE PHASES FOUR WIRE METER AS TWO PHASE FOUR WIRE

METER FOR TRACTION METERING

(51) International classification :G06F19/00





Filing Date

:NA

:NA



Filing Date

:NA

:NA


Filing Date

:NA

:NA


1)Manish Ganeshrao Wath Address of Applicant :Superintending Engineer (MSEDCL),

and Ph.D. Scholar Department of Electrical Engineering,

Visvesvaraya National Institute of Technology, Nagpur- 440010

Maharashtra India

2)Dr. Makarand Sudhakar Ballal

3)Dr. Hiralal M. Suryawanshi

4)Sugali Harinaik (72)Name of Inventor :

1)Manish Ganeshrao Wath

2)Dr. Makarand Sudhakar Ballal

3)Dr. Hiralal M. Suryawanshi

4)Sugali Harinaik

(57) Abstract :

Present invention in general relates to design and develop standardization of three phases four wire meter as two phase four wire meter

for traction metering. The present invention is used for accurate electrical energy measurement on utility side of traction transformer

i.e. at 220kV or 132kV side of traction transformer. The main purpose of using three phase (0.2S class meter) is to avoid summation

meter for multi circuit measurement. The present invention two phase four wire 0.2S accuracy class traction meter provides effective

measurement of single and multi-circuits in traction system. By using present invention we can measure voltage, current, active

energy, reactive energy, apparent energy, power factor and power of single and multi-circuit traction system. Following invention is

described in detail with the help of Figure 1 of sheet 1 showing modified connection of 3p 4w meter for traction purpose and Figure 2

of sheet 2 showing modified connection diagram for double circuit.




(19) INDIA


(54) Title of the invention : COLD PROCESSABLE NON-TOXIC PRESERVATIVE COMPOSITION FOR HOME AND

PERSONAL CARE PRODUCTS

(51) International classification :A61Q5/02





Filing Date

:NA

:NA



Filing Date

:NA

:NA


Filing Date

:NA

:NA


1)GALAXY SURFACTANTS LTD. Address of Applicant :C-49/2, TTC Industrial Area, Pawne,

Navi Mumbai 400703 Maharashtra, India Maharashtra India


1)KOSHTI, Nirmal

2)WANKHADE, Arpit

3)SAWANT, Bhagyesh

4)MALI, Devyani

5)RATNAPARKHE, Shraddha

(57) Abstract :

Anti-microbial composition for preservation of personal care and home care products is described. Solid preservative composition of

this patent application is completely free from toxic antimicrobials and has a broad spectrum of antimicrobial activity. It works as a

stand-alone preservative without any additional booster molecule/s. The preservative composition of this patent application is based

on N-capryloyl glycine, N-undecylenoyl glycine, benzoic acid and sodium dehydroacetate. The preservative composition of the

present invention is cold processable. The preservative composition of this invention is in solid flake form to avoid dust explosion

hazard that is generally associated with fine particulate matter. The personal and home care products that can be preserved by this

composition of antimicrobials are, gels, serums, solutions, powders, lotions, creams, emulsions, wet wipes, hand-dish wash and the

like, containing water in varying amount.




(19) INDIA


(54) Title of the invention : TOUCH DISPLAY PANEL, DRIVING METHODAND TOUCH DISPLAY DEVICE

(51) International classification :G06F3/041, G06F3/044

(31) Priority Document No :201610789487.5


(33) Name of priority country :China


Filing Date

:NA

:NA



Number

Filing Date

:NA

:NA


Filing Date

:NA

:NA


1)XIAMEN TIANMA MICRO-ELECTRONICS CO., LTD Address of Applicant :6999 West Xiangan Rd, Xiangan

District, Xiamen, Fujian P.R. China 361101 China

2)TIANMA MICRO-ELECTRONICS CO., LTD. (72)Name of Inventor :

1)YANG, Wenbin

2)YANG, Kangpeng

3)XU, Yumin

(57) Abstract :

A touch display panel, a driving method and a touch display device are provided. Touch and display are driven synchronously in the

touch display panel, that is, touch detection is implemented while the display is performed, there is no need to perform the display and

the touch in different stages, thereby avoiding limiting an improvement on a report rate, and ensuring a high report rate of the touch

display device.




(19) INDIA


(54) Title of the invention : INTEGRATED TOUCH CONTROL DISPLAY PANEL AND INTEGRATEDTOUCH CONTROL

DISPLAY DEVICE COMPRISING THE SAME

(51) International classification :G06F3/041, G09G3/36

(31) Priority Document No :201610617665.6


(33) Name of priority country :China


Filing Date

:NA

:NA



Number

Filing Date

:NA

:NA


Filing Date

:NA

:NA


1)XIAMEN TIANMA MICRO-ELECTRONICS CO., LTD Address of Applicant :6999 West Xiangan Rd., Xiangan

District, Xiamen City, Fujian Province 361101 China China

2)TIANMA MICRO-ELECTRONICS CO., LTD. (72)Name of Inventor :

1)ZHENG, Chao

2)HOU, Mingchao

3)ZHENG, Zhiwei

4)YANG, Kangpeng

5)XU, Yumin

(57) Abstract :

The present application discloses an integrated touch control display panel (100, 600, 700) and an integrated touch control display

device (800) comprising the same. A specific embodiment of the integrated touch control display panel comprises a plurality of touch

control sensing electrodes (11, 21, 31, 41, 51, 61, 720) extending along a first direction and disposed along a second direction. The

touch control sensing electrode (11, 21, 31, 41, 51, 61, 720) has a grid structure, and comprises a plurality of electrically connected

metal electrodes (111, 211, 311, 411, 511, 611). The metal electrode comprises a plurality of electrically connected sub-metal

electrodes, and the sub-metal electrode has a width of a, wherein 2.5 m = a = 3 m. In this embodiment, the blocking effect of the

grid touch control sensing electrodes on the light in a display region is attenuated, and thereby display effect is improved.



(12) PATENT APPLICATION PUBLICATION (21) Application No.3483/MUM/2015 A

(19) INDIA


(54) Title of the invention : FUZZY NEURON BASED INFORMATION RETRIEVAL SYSTEM

(51) International classification :G06N





Filing Date

:NA

:NA



Filing Date

:NA

:NA


Filing Date

:NA

:NA


1)Prof. Priti Abhay Khodke Address of Applicant :Prof Ram Meghe College of

Engineering & Management, New Express Highway, Badnera,

Amravati, Maharashtra- 444701 Maharashtra India

2)Dr. M. S. Ali (72)Name of Inventor :

1)Prof. Priti Abhay Khodke

2)Dr. M. S. Ali

(57) Abstract :

Most research work involves applying concepts associated with fuzzy systems to neural networks in order to obtain neuro-fuzzy

systems. This invention presents a variation on the same by incorporating fuzzy theory inside the neuron, making it a fuzzy neuron.

One application area of the system includes Information Retrieval, where it helps retrieving the results intelligently, imitating the

behavior of a biological neuron and adapting to the changing user requests while searching. Following invention is described in detail

with the help of Figure 1 of sheet 1 showing the schematic representation of the fuzzy neuron used in the Information retrieval process

and Figure 2 of sheet 2 showing the structure of Fuzzy Neuron System.




(19) INDIA


(54) Title of the invention : A digital frozen semen thawing system

(51) International classification :A61D

19/00





Filing Date

:PCT//

:01/01/1900



Filing Date

:NA

:NA


Filing Date

:NA

:NA


1)Sanjeev Latkar Address of Applicant :#6, Rachana Avenue, 1229-B, FC Road,

Deccan Gymkhana, Pune 411004. Maharashtra India


1)Sanjeev Latkar

(57) Abstract :

The present invention is to provide a system and a method for liquefying a frozen semen in a semen straw to a predefined temperature

is provided. The system includes a container, a heating arrangement, a vibrating member, at least one sensor, a display and an energy

storage device. The container is filled with a media and the container holds at least a frozen semen straw therein. The heating

arrangement is for heating media to a predefined temperature inside the container. The vibrating member agitates the media for faster

heat transfer between the frozen semen straw and the media. The at least one sensor is arranged in contact with the media for sensing

temperature of the media, thereby maintaining a constant temperature of media. The display is arranged exterior of the system for

displaying the temperature of media inside the container in real-time. The energy storage device provides electrical power to the

system.




(19) INDIA


(54) Title of the invention : CURRENT THEFT TRACKING SPOT USING GPS.

(51) International classification :H04W4/04, H04W4/02





Filing Date

:NA

:NA



Number

Filing Date

:NA

:NA


Filing Date

:NA

:NA


1)SHELKE AKSHAY DATTATRAY Address of Applicant :A-3/3, SHIVAJINAGAR,

AURANGABAD-431 005, MAHARASHTRA, INDIA.

Maharashtra India


1)SHELKE AKSHAY DATTATRAY

(57) Abstract :

The purpose of the project is to improve utilization of power of the existing system to save cost and to avoid the loss of source power.

Reduction the illegal theft of electricity. At first when we start this project we connect supply from sub-station which goes to main

city. In this main line if someone try to theft electricity then we can find the exact location of theft area location on pc and display

through this system. When we open the Arduino comport window of this project, we can see the exact location on Google map on

Google earth Software.




(19) INDIA


(54) Title of the invention : BIOAVAILABILITY ENHANCEMENT AND DEVELOPMENT OF TASTE MASKED DRY

POWDER FOR ORAL SUSPENSION OF ANTIVIRAL AGENT.

(51) International classification :A61K31/41, A01N43/82





Filing Date

:NA

:NA



Number

Filing Date

:NA

:NA


Filing Date

:NA

:NA


1)NORTH MAHARASHTRA UNIVERSITY Address of Applicant :NORTH MAHARASHTRA

UNIVERSITY POAR BOX: 80, UMAVINAGAR, JALGAON-

425 001, MAHARASHTRA, INDIA. Maharashtra India


1)MR. UMAKANT VERMA

2)MR. GOKUL A. KHAIRNAR

3)MR. RAHUL RAJPUT

4)DR. RAJIB BANDYOPADHYAY

5)DR. NABARUN BHATTACHARYYA

6)DR. JITENDRA B. NAIK

(57) Abstract :

The present invention describes a pharmaceutical composition with enhance bioavailability for oral administration in powder form;

where in taste of the active pharmaceutical ingredient is masked by Spray drying technique. The pharmaceutical composition

comprising the glycyrrhizin and polyvinyl pyrrolidone K-30, which is used as taste masking agent for the unpleasant drug. The

composition contains taste masked active pharmaceutical ingredient (Efavirenz), Xanthan gum and other pharmaceutically acceptable

ingredients and the said pharmaceutical composition is homogeneously distributed for extended period of when dispersed in suitable

suspending agent. Further, the taste masked antiviral formulation of the present invention is provided in the form of oral suspension

wherein the bitter taste of efavirenz is masked there by providing palatable formulations.




(19) INDIA


(54) Title of the invention : SYSTEM FOR MANUFACTURE OF ADHESIVE TAPES

(51) International classification :C09J7/02, B32B41/00





Filing Date

:NA

:NA



Number

Filing Date

:NA

:NA


Filing Date

:NA

:NA


1)Shrikant Prabhakar Athavale Address of Applicant :B 801, Vastushree Pearl, Near Utsav

Hall, Kinara Hotel Lane, Paud Road, Kothrud, Pune-411038,

Maharashtra India


1)Shrikant Prabhakar Athavale

(57) Abstract :

SYSTEM FOR MANUFACTURE OF ADHESIVE TAPES Described is an integrated system and a process for manufacture of paper-

based adhesive tapes which results in cost savings and increases the efficiency of the manufacturing process.




(19) INDIA


(54) Title of the invention : MOTION DETECTION ALARM SYSTEM

(51) International classification :G08B, G01P13/00, G08B13/14





Filing Date

:NA

:NA


(61) Patent of Addition to

Application Number

Filing Date

:NA

:NA

(62) Divisional to Application

Number

Filing Date

:NA

:NA


1)SANKET SUBHASH CHIDREWAR Address of Applicant :S/O SUBHASH CHIDREWAR,

SARAF LINE, CHILLARGE GALLI, UDGIR, LATUR-413517,

MAHARASHTRA, INDIA. Maharashtra India

2)AJINKYA AVINASH MAHAJAN (72)Name of Inventor :

1)SANKET SUBHASH CHIDREWAR

2)AJINKYA AVINASH MAHAJAN

(57) Abstract :

Continuous increasing incidents of breaching the boundaries of the individuals residential premises or any public treasure may lead to

some serious damage to them. The instances of the incidents may vary to a large extent. Some of them may cause minor issues but

some may cause major problems. The fatal incidents like theft or robbery in ones private premises. In farms at the night time if any

animal is entered in the farm then that animal can destroy the crops. All of these stated issues can be overcome by the proposed

system. This can be applied to the domestic and even in the national security incidents. The restricted areas prevent the trespassers to

enter. The national borders can be equipped with this system to prevent the cross borders incidents. The MOTION DETECTION

ALARM SYSTEM can be developed which would help in giving a ALARM RING with glowing BULB when any type of infiltration

in our surroundings and helping us to get aware of such things. This system will produce visual as well as audible alert whenever there

is human motion detected in the range of sensor. Whatever may be the condition once human motion detected the alarm system gives

audible as well as visual sound until we switch off the power supply.



(12) PATENT APPLICATION PUBLICATION (21) Application No.2226/MUM/2015 A

(19) INDIA


(54) Title of the invention : A METHOD AND AN APPARATUS FOR HYDROPOWER GENERATION, TRANSPORTATION BY

WATER AND WATER DISTRIBUTION

(51) International classification :F04D13/00





Filing Date

:NA

:NA



Filing Date

:NA

:NA


Filing Date

:NA

:NA


1)MR.VIJENDRA SINGH GUSAIN Address of Applicant :FLAT NO.11, WILSON HOUSE,

DUMAYNE ROAD, COLABA, MUMBAI-400 005,

MAHARASHTRA, INDIA. Maharashtra India


1)MR.VIJENDRA SINGH GUSAIN

(57) Abstract :

The present invention relates to a method and an apparatus for hydropower generation, transportation by water and distribution of

water. More particularly, the present invention integrates into one system a provision for transportation and navigation of animate

and/or inanimate objects through water comprising of an inherent means for power generation and water distribution making use of an

innovation structure arrangement. Fig. 1 to Fig. 7




(19) INDIA


(54) Title of the invention : NON INTRUSIVE INTELLIGENT ELDERLY MONITORING SYSTEM

(51) International classification :G06F

21/00





Filing Date

:NA

:NA



Filing Date

:NA

:NA


Filing Date

:NA

:NA


1)Aardra Kannan Ambili Address of Applicant :TC 51/2056 Thenguvila

lane,Trivandrum Kerala India 695019 Kerala India


1)Aardra Kannan Ambili

(57) Abstract :

Title: Non-intrusive intelligent elderly monitoring system A non-intrusive intelligent elderly monitoring system configured to

automatically detect unusual movements and short and long term behavioral changes of occupants in a room and generate alerts when

such an event is observed, is disclosed. Said system uses a combination of UWB radar sensor (10) and thermal sensor (11) to monitor

the movement patterns as well as vital signs of the person, wherein Al module learns the behaviour patterns and classifies and

generates datasets, whereupon the system generates alerts if any abnormal deviations in behaviour patterns or vital signs is observed.

Fig 1




(19) INDIA


(54) Title of the invention : HANDSUM PAY (INCLUDING HANDSUM INTERFACE)

(51) International classification :G06Q

20/00





Filing Date

:NA

:NA



Filing Date

:NA

:NA


Filing Date

:NA

:NA


1)C. Srinivasan Address of Applicant :New No 23 Old No 17, Akbarabad

Second Street, Kodambakkam.Chennai TAMIL NADU INDIA

600024 Tamil Nadu India

2)S. Sandeep

3)T. Vijayakumar (72)Name of Inventor :

1)C. Srinivasan

2)S. Sandeep

3)T. Vijayakumar

(57) Abstract :

In one embodiment, HandSum Pay i.e. the present invention being the method for enabling the completion of a cashless payment

transaction from a Customer to a Merchant through the Aadhaar Enabled Payment System (AEPS ), comprises primarily of scanning

the Aadhaar Number and Fingerprint of the Customer, capturing these in the HandSum Interface together with the transaction

amount and transferring all of the data to AEPS via the Merchant Banks Core Banking System. AEPS will validate the Aadhaar

Number and Fingerprint with UIDAI and upon successful authentication, AEPS will instruct the Banking System to debit the

Customers Bank Account and credit the Merchants Bank Account, thereby completing the authentic cashless payment transaction,

debit and credit slips will be printed.




(19) INDIA


(54) Title of the invention : AUTOMATION IN PORTABLE OIL SEAL ASSEMBLY MACHINE

(51) International classification :F15B

21/00





Filing Date

:NA

:NA



Filing Date

:NA

:NA


Filing Date

:NA

:NA


1)C. Mathalai Sundaram Address of Applicant :Department of Mechanical Engineering,

Nadar Saraswathi College of Engineering and Technology,

Vadapadupatti, Annanji (PO),Theni. Tamilnadu.India.625 531

Tamil Nadu India


1)C. Mathalai Sundaram

(57) Abstract :

Automation in portable Oil Seal Assembly Machine The present invention is an oil seal assembly machine comprising of an air

cylinder, FRL unit, 5/2DC valve, flow control fittings. The atmospheric air is compressed in the air compressor I 10 and the air enters

into the FRL unit 1 15. Further, in the FRL unit 115, the hot and dirty air is cooled first, filtered by filter arrangement and lubricated

by lubricator. Then the required amount of air (5 bar) is allowed to come out from FRL unit 115 by regulator. The assembled oil seal

set (lOnos) can be taken out easily at each time of this cycle. The flow control fittings 125 are mounted at the inlet and outlet of the

cylinder which is used to control the motion speed of the piston. The oil seal assembly machine comprises of an upper plate 210,

pneumatic cylinder 215, column, 220, movable plate 225, upper die 230, lovver die 235, stopper 240 and Fixed bottom 245.




(19) INDIA


(54) Title of the invention : WEAR BEHAVIOUR OF ALUMINIUM ALLOY 8011

(51) International classification :F16D

3/00





Filing Date

:NA

:NA



Filing Date

:NA

:NA


Filing Date

:NA

:NA


1)S. MAGIBALAN Address of Applicant :ASSISTANT PROFESSOR,

DEPARTMENT OF MECHANICAL ENGINEERING, K.S.R.

COLLEGE OF ENGINEERING, TIRUCHENGODE-637 215.

Tamil Nadu India


1)S. MAGIBALAN

2)P. SENTHILKUMAR

3)M. PRABU

4)K. SELVRAJA

5)P. VIGNESH

(57) Abstract :

This research work focus on tribological behaviour of AA8011 Aluminium Alloy fabricated through liquid metallurgy route. The

investigation samples are prepared and tested as per ASTM- G99. Response Surface Methodology (RSM) was used to 3 factors, 3

levels face centered central composite design (FCCCD) was used to minimize the quantity of investigational conditions and establish

the statistical relationship between the key process parameters namely normal load (5, 10, 15 N), time (5, 10, 15 min) and sliding

velocity (1.5, 3.0, 4.5 m/s) toward evaluation the wear using statistical regression analysis and analysis of variance (ANOVA). It was

observed that the normal load significant parameter followed by time and sliding velocity for the wear rate (WR) and Co-efficient of

Friction (COF).A regression model was developed to predict the wear rate of the prepared AA8011. It was experimental from the

graph that the wear rate decreases with sliding velocity and increases with time and normal load.




(19) INDIA


(54) Title of the invention : FLEXIBLE PRINTER HEAD TIP FOR ADDITIVE MANUFACTURING

(51) International classification :G06Q

99/00





Filing Date

:NA

:NA



Filing Date

:NA

:NA


Filing Date

:NA

:NA


1)BALAJI. D Address of Applicant :Department of Mechanical Engineering,

KPR Institute of Engineering and Technology SF. No: 204/2 &

204/4 Kollupalayam, Arasur, Coimbatore,Tamil Nadu.

India.641407. Tamil Nadu India


1)BALAJI. D

2)UDHAYAKUMAR. N

3)UDHAYAKUMAR. N

4) Dr. JOSEPHINE PETER

5)R. VIGNESH

6) DHARANI KUMAR. M

(57) Abstract :

The fast growing world is not leaving our any industries; the additive manufacturing industry is not the exception for this. The

industries are growing using the way of reducing product developing time with good quality. This is conveying to develop the additive

manufacturing printer to print in faster way to develop the component. The fast printing can be achieved by the flexible tip method.

The faster product development leads to economical benefits.




(19) INDIA


(54) Title of the invention : STRUCTURED PYRMID WITH EFFECTIVE COOLING SOLAR PANEL

(51) International classification :H01L

31/00





Filing Date

:NA

:NA



Filing Date

:NA

:NA


Filing Date

:NA

:NA







1)BALAJI. D

2)R. VIGNESH

3)Dr. JOSEPHINE PETER

4)UDHAYAKUMAR. N

5)UDHAYAKUMAR. N

6)DHARANI KUMAR. M

7)DHARANI KUMAR. M

(57) Abstract :

The solar panel is considered to be the best way of absorbing the heating energy and converting it into the electrical energy. This is

used widely has a good renewable energy comparing to other energy renewable energy. This system has some issues in it like losses

due to heat and light reflection. These two issues contribute more on efficiency related problem. So, this is taken into consideration

and arranged the arrays of solar panel and provided good cooling effect naturally to increase the efficiency.




(19) INDIA


(54) Title of the invention : SOLAR&NBSP;COOKER

(51) International classification :F24J

2/00





Filing Date

:NA

:NA



Filing Date

:NA

:NA


Filing Date

:NA

:NA


1)M K PRAVEEN KUMAR Address of Applicant :N0.621, 4m MAIN,41U CROSS,E&F

BLOCK, RAMAKRISHNA NAGAR, MYSORE, KARNATAKA

-570022, INDIA Karnataka India


1)M K PRAVEEN KUMAR

(57) Abstract :

Solar cooker includes an insulated manifold header pipe 09. Plurality of evacuated tube collectors (ETC) 01 having copper heat pipes

08 inside the tubes mounted on a mounting rack. A pressure cooker 05 connected to one end of the manifold header pipe. Another end

of the manifold header pipe is provided a drain valve 06. Heads/condensers 08a of the copper heat pipes are inserted into heat pipe

ports of the manifold header pipe.




(19) INDIA


(54) Title of the invention : GROUND IMPROVEMENT BY MULTIPLE- DRIVEN COMPACFED GRANULAR INTRUSLONS

(51) International classification :E02D

3/00





Filing Date

:NA

:NA



Filing Date

:NA

:NA


Filing Date

:NA

:NA


1)Dr. Babu T. jose Address of Applicant :92, Vidhya Nagar, Cochin University P

O, Kochi 682022. Kerala India

2)Dr.Anil Joseph (72)Name of Inventor :

1)Dr. Babu T.Jose

2)Dr. Anil Joseph

(57) Abstract :

Ground Improvement by Multiple Driven Compacted Granular Intrusions Constructions on soli clay deposits are often faced with

problems of poor shear strength and large scale consolidation settlement. Shorter drainage paths to expedite consolidation and

preloading to force pre-consolidation have been successfully used in such situations. Expulsion of water from pore space via

consolidation, improves shear strength. This is achieved by shorter drainage path and creation of pore pressure and subsequent

dissipation thiough closely spaced sand piles and PVDs. In case of clays with poor shear strength, the soil might fail even by low-

embankments used for preloading. A new process is being proposed/developed in which pre-consolidation or evolution of pore

pressure and dissipation is initiated as soon as the new ground improvement technique called Multiple Driven Compacted Granular

Intrusions is applied. In place of PVD or sand pile, a well compacted granular intrusion is installed in the soft clay. The compacted

granular material pushes the soil radially outward creating a pore pressure as the soil around gets compressed in a similar way as

preloading. Passive earth pressure developed initiate drainage into this granular medium and pre-consolidation is initiated without

preloading. In effect pre-consolidation is achieved without preloading at ground level. Excessive settlements or rotational failures are

totally avoided to a very great extent as the geometry of system or the overall stress pattern is not disturbed.




(19) INDIA


(54) Title of the invention : A NOVEL PROCESS FOR THE PREPARATION OF METOPIMAZINE

(51) International classification :A61K

31/00





Filing Date

:NA

:NA



Filing Date

:NA

:NA


Filing Date

:NA

:NA


1)Surana College Address of Applicant :#16, South End Road, Bangalore-560

004, India Karnataka India

2)Micro Labs Limited (72)Name of Inventor :

1)SAMUELSON, Sakuntala

2)PIJAKKALA, Jeevitha Keshav

3)KUMAR, Pramod

4)BABU, Prashanth Kumar

5)KARICHERLA, Venumanikanta

(57) Abstract :

Abstract: The present invention relates to a novel process for the preparation of Metopimazine in high yield involving a novel

intermediate of Formula III.




(19) INDIA


(54) Title of the invention : CLOTH PAD

(51) International classification :A41D

27/00





Filing Date

:NA

:NA



Filing Date

:NA

:NA


Filing Date

:NA

:NA


1)NANDARAJAN .K Address of Applicant :15, MARIAMMAN KOIL STREET,

SELLAPERUMAL PET, PUDUCHERRY-605 008, UNION

TERRITORY OF PUDUCHERRY INDIA. Pondicherry India


1)NANDARAJAN .K

(57) Abstract :

Throughout human history, Textiles were used to express immediately, social status and group identity or membership.To-day people

enjoy textiles a beautiful object, but they did not kept their dresses in proper manner. Most of the people are kept their dresses at

Almirah simply. But, later on they are looked un-evenly due to fast tife style. To avoid the above inconvenience, bundling system will

be introduced to keep the dresses in proper manner. As such a cloth pad is essential for bundling the dresses. The cloth pad bundle

system is much convenient to keep washed dresses gently. It will be easy to take particular dress immediately and the remaining will

keep safely within a minute. Hence the cloth pad is one of the essential living things to the human life definitely.




(19) INDIA


(54) Title of the invention : STRUCTURED PYRMID SOLAR PANEL

(51) International classification :H01L

31/00





Filing Date

:NA

:NA



Filing Date

:NA

:NA


Filing Date

:NA

:NA







1)BALAJI. D

2)DHARANI KUMAR. M

3)DHARANI KUMAR. M

4)Dr. JOSEPHINE PETER

5)UDHAYAKUMAR. N

6)R. VIGNESH

7)R. VIGNESH

(57) Abstract :

The solar panel is designed in such a way that the efficiency can be increased considerably. The simpler constructional change

provides room to achieve this efficiency improvement in the solar panel. This can be effectively adopted in many place as other solar

panels is being used.




(19) INDIA


(54) Title of the invention : AN ACTIVE ANTI GLARE SYSTEM AND METHOD FOR REDUCING GLARE IN VEHICLES

(51) International classification :B60Q 1/00

(31) Priority Document No :2496/CHE/2015


(33) Name of priority country :India


Filing Date

:NA

:NA



Filing Date

:NA

:NA


Filing Date

:NA

:NA


1)MOTAMARRI VENKATA AMARESH KUMAR Address of Applicant :J1 ALPINE MEADOWS, 14TH

CROSS KUVEMPU ROAD, VIGNAN NAGAR, BANGALORE

- 560075 Karnataka India


1)MOTAMARRI VENKATA AMARESH KUMAR

2)GOWRISHANKAR RAMADURAI

3)VINAY HEGDE

(57) Abstract :

The present invention discloses an active anti glare system and method for reducing glare in vehicles comprising a signal generator; a

headlight controller for causing pulsating light to be emitted by the vehicles headlights based on the signal from said signal generator;

and a LCD controller for causing the LCD to alternate between transparent state and opaque state based on the signal generated by

said signal generator whereby the active anti-glare system cuts down the intensity of the headlight coming from the opposite vehicle

without reducing the net intensity of the light emitted from the vehicles headlights under consideration. The system reduces the glare

produced because of headlights especially during night driving. Fig. 1




(19) INDIA


(54) Title of the invention : DESIGN, SYNTHESIS AND PHARMACOLOGICAL EVALUATION OF BENZIMIDAZOLE AND

BENZIMIDAZOLIUM DERIVATIVES

(51) International classification :C07D

235/00





Filing Date

:NA

:NA

(87) Int

official journal of the patent office -...

Documents