od imperial (asme bpe design)...219.08 264.67 28.0 12’’ 338.0 273.05 314.71 28.0 bs schedule 10s...
TRANSCRIPT
CLAMP Ferrule à souder OD 316L poli / CLAMP Lasferrule OD 316L gepolijst
OD IMPERIAL (ASME BPE Design)
Size d1 d2 d6 a
1/2’’ 25 12.7 9.40 21.5
3/4’’ 25 19.05 15.75 21.5
1’’ 50.5 25.40 22.10 21.5
1 1/2’’ 50.5 38.10 34.80 21.5
2’’ 64.0 50.80 47.50 21.5
2 1/2’’ 77.5 63.50 60.20 21.5
3’’ 91.0 76.10 72.90 21.5
3 1/2’’ 106.0 88.9 84.70 21.5
4’’ 119.0 101.60 97.60 21.5
4 1/2’’ 130.0 114.95 110.30 28.0
5’’ 144.4 127.00 123.00 28.0
5 1/2’’ 155.0 140.55 135.76 28.0
6’’ 167.0 154.00 150.00 28.0
6 5/8’’ 183.0 169.35 163.10 28.0
8’’ 233.5 204.00 200.00 28.0
8 5/8’’ 286.1 220.55 213.90 28.0
10’’ 268.0 254.00 250.00 28.0
10 5/8’’ 286.1 273.00 266.30 28.0
12’’ 319.0 304.80 300.80 28.0
12 5/8’’ 338.0 323.80 315.90 28.0
Industrie pharmaceutique | Farmaceutischeindustrie
1Informations données à titre indicatif et sous réserve de modifications éventuelles | Deze inlichtingen worden alleen maar ten tittel van informatie gegeven. Eventuele veranderingen voorbehoud.
Rue de l’Eglise, 22 | B- 1367 Mont-Saint-André | T. +32 81 877 143 | F. +32 81 877 637 | [email protected] | www.balvinox.be
Inox 316L Poli/Gepolisjt
Ra ≤ 0,4 µm
Material certification 3.1
DIN 32 676
Size d1 d2 d6 a
DN 10 34.00 13.00 10.00 18.00
DN 15 34.00 19.00 16.00 18.00
DN 20 34.00 23.00 20.00 18.00
DN 25 50.50 29.00 26.00 21.50
DN 32 50.50 35.00 32.00 21.50
DN 40 50.50 41.00 38.00 21.50
DN 50 64.00 53.00 50.00 21.50
DN 65 91.00 70.00 66.00 21.50
DN 80 106.00 85.00 81.00 21.50
DN 100 119.00 104.00 100.00 21.50
DN 125 155.00 129.00 125.00 28.00
DN 150 183.00 154.00 150.00 28.00
DN 200 233.50 204.00 200.00 28.00
CLAMP Ferrule à souder DIN 316L poli / CLAMP Lasferrule DIN 316L gepolijst
Industrie pharmaceutique | Farmaceutischeindustrie
2Informations données à titre indicatif et sous réserve de modifications éventuelles | Deze inlichtingen worden alleen maar ten tittel van informatie gegeven. Eventuele veranderingen voorbehoud.
Rue de l’Eglise, 22 | B- 1367 Mont-Saint-André | T. +32 81 877 143 | F. +32 81 877 637 | [email protected] | www.balvinox.be
Inox 316L Poli/Gepolisjt
Ra ≤ 0,4µm
Material certification 3.1
BS Schedule 5s
Size d1 d2 d6 a
1/2’’ 50.5 21.34 18.04 21.5
3/4’’ 50.5 26.67 23.37 21.5
1’’ 50.5 33.40 30.10 21.5
1 1/4’’ 64.0 42.16 38.86 21.5
1 1/2’ 64.0 48.26 44.96 21.5
2’’ 77.5 60.33 57.02 21.5
2 1/2’’ 91.0 73.03 68.81 21.5
3’’ 106.0 88.90 84.68 21.5
3 1/2’’ 119.0 101.60 97.38 21.5
4’’ 130.0 114.30 110.08 28.0
5’’ 155.0 141.30 135.76 28.0
6’’ 183.0 168.28 162.74 28.0
8’’ 233.5 219.28 213.54 28.0
10’’ 286.1 273.05 266.25 28.0
12’’ 338.0 323.85 315.93 28.0
CLAMP Ferrule à souder Sch 5s 316L poli / CLAMP Lasferrule Sch 5s 316L gepolijst
Industrie pharmaceutique | Farmaceutischeindustrie
3Informations données à titre indicatif et sous réserve de modifications éventuelles | Deze inlichtingen worden alleen maar ten tittel van informatie gegeven. Eventuele veranderingen voorbehoud.
Rue de l’Eglise, 22 | B- 1367 Mont-Saint-André | T. +32 81 877 143 | F. +32 81 877 637 | [email protected] | www.balvinox.be
Inox 316L Poli/Gepolisjt
Ra ≤ 0,4µm
Material certification 3.1
Size d1 d2 d6 a
1/2’’ 50.5 21.34 17.12 21.5
3/4’’ 50.5 26.67 22.45 21.5
1’’ 50.5 33.40 27.86 21.5
1 1/4’’ 64.0 42.16 36.62 21.5
1 1/2’ 64.0 48.26 42.72 21.5
2’’ 77.5 60.33 54.79 21.5
2 1/2’’ 91.0 73.03 66.93 21.5
3’’ 106.0 88.90 82.80 21.5
3 1/2’’ 119.0 101.60 95.50 21.5
4’’ 130.0 114.30 108.20 28.0
5’’ 155.0 141.30 134.50 28.0
6’’ 183.0 168.28 161.47 28.0
8’’ 233.5 211.56 211.56 28.0
10’’ 286.1 219.08 264.67 28.0
12’’ 338.0 273.05 314.71 28.0
BS Schedule 10s
CLAMP Ferrule à souder Sch 10s 316L poli / CLAMP Lasferrule Sch 10s 316L gepolijst
Industrie pharmaceutique | Farmaceutischeindustrie
4Informations données à titre indicatif et sous réserve de modifications éventuelles | Deze inlichtingen worden alleen maar ten tittel van informatie gegeven. Eventuele veranderingen voorbehoud.
Rue de l’Eglise, 22 | B- 1367 Mont-Saint-André | T. +32 81 877 143 | F. +32 81 877 637 | [email protected] | www.balvinox.be
Inox 316L Poli/Gepolisjt
Ra ≤ 0,4µm
Material certification 3.1
BS Schedule 40s
Size d1 d2 d6 a
1/2’’ 50.5 21.34 15.80 21.5
3/4’’ 50.5 26.67 20.93 21.5
1’’ 50.5 33.40 26.64 21.5
1 1/4’’ 64.0 42.16 35.04 21.5
1 1/2’ 64.0 48.26 40.88 21.5
2’’ 77.5 60.33 52.51 21.5
2 1/2’’ 91.0 73.03 62.71 21.5
3’’ 106.0 88.90 77.92 21.5
3 1/2’’ 119.0 101.60 90.12 21.5
4’’ 130.0 114.30 102.26 28.0
5’’ 155.0 141.30 128.20 28.0
6’’ 183.0 168.28 154.06 28.0
8’’ 233.5 211.56 202.72 28.0
10’’ 286.1 219.08 254.51 28.0
12’’ 338.0 273.05 304.79 28.0
CLAMP Ferrule à souder Sch 40s 316L poli / CLAMP Lasferrule Sch 40s 316L gepolijst
Industrie pharmaceutique | Farmaceutischeindustrie
5Informations données à titre indicatif et sous réserve de modifications éventuelles | Deze inlichtingen worden alleen maar ten tittel van informatie gegeven. Eventuele veranderingen voorbehoud.
Rue de l’Eglise, 22 | B- 1367 Mont-Saint-André | T. +32 81 877 143 | F. +32 81 877 637 | [email protected] | www.balvinox.be
Inox 316L Poli/Gepolisjt
Ra ≤ 0,4µm
Material certification 3.1
ISO 1127Size d1 d2 d6 a
DN 8 / 25 25.0 13.50 10.30 21.5
DN 8 / 34 34.0 13.50 10.30 18.0
DN 10 / 25 25.0 17.20 14.00 21.5
DN 10 / 34 34.0 17.20 14.00 18.0
DN 15 / 50.5 50.5 21.30 18.10 21.5
DN 15 / 34 34.0 21.30 18.10 18.0
DN 20 / 50.5 50.5 26.90 23.70 21.5
DN 20 / 50.5 50.5 26.90 22.90 21.5
DN 25 / 50.5 50.5 33.70 29.700 21.5
DN 32 / 50.5 50.5 42.40 38.40 21.5
DN 32 / 64 64.0 42.40 38.40 21.5
DN 40 / 64 64.0 48.30 44.30 21.50
DN 50 / 77.5 77.5 60.30 56.30 21.50
DN 65 / 91 91.0 76.10 72.10 21.50
DN 80 / 106 106.0 88.90 84.90 21.50
DN 100 / 130 130.0 114.3 110.3 28.50
DN 125 / 155 155.0 139.7 135.7 28.0
DN 150 / 183 183.0 168.30 163.10 28.0
DN 200 / 233 233.5 219.10 213.90 28.0
DN 250 / 286 286.1 273.0 267.80 28.0
DN 300 / 338 338.50 323.90 318.70 28.0
CLAMP Ferrule à souder ISO 316L poli / CLAMP Lasferrule ISO 316L gepolijst
Industrie pharmaceutique | Farmaceutischeindustrie
6Informations données à titre indicatif et sous réserve de modifications éventuelles | Deze inlichtingen worden alleen maar ten tittel van informatie gegeven. Eventuele veranderingen voorbehoud.
Rue de l’Eglise, 22 | B- 1367 Mont-Saint-André | T. +32 81 877 143 | F. +32 81 877 637 | [email protected] | www.balvinox.be
Inox 316L Poli/Gepolisjt
Ra ≤ 0,4µm
Material certification 3.1
Industrie pharmaceutique | Farmaceutischeindustrie
Inox 316L Poli/Gepolijst
Ra ≤ 0,4µm Material certification 3.1
Size d6 a
1/2’’-3/4’’ 25.0 6.0
1’’-1 1/2’’ 50.5 6.0
2’’ 64.0 7.0
2 1/2’’ 77.5 7.0
3’’ 91.0 7.0
3 1/2’’ 106.0 7.0
4’’ 119.0 7.0
4 1/2’’ 130.0 7.0
5’’ 144.4 8.0
5 1/2’’ 155.0 10.0
6’’ 167.0 11.0
6 5/8’’ 183.0 10.0
8’’ 217.4 10.0
8 5/8’’ 233.5 10.0
10’’ 268.0 10.0
10 5/8’’ 286.1 10.0
12’’ 319.0 10.0
Clamp Bouchon plein / Clamp Blind Ferrule
OD IMPERIAL DIN 32 676
Size d6 a
DN 10-15-20 34.0 6.0
DN 25-40 50.5 6.00
DN 50 64.0 7.0
DN 65 91.0 7.0
DN 80 106.0 7.0
DN 100 119.0 7.0
DN 125 155.0 10.0
DN 150 183.0 10.0
DN 200 233.5 10.0
DN 250 268.0 10.0
DN 300 319.0 10.0
1Informations données à titre indicatif et sous réserve de modifications éventuelles | Deze inlichtingen worden alleen maar ten tittel van informatie gegeven. Eventuele veranderingen voorbehoud.
Rue de l’Eglise, 22 | B- 1367 Mont-Saint-André | T. +32 81 877 143 | F. +32 81 877 637 | [email protected] | www.balvinox.be
Collier massif Inox S Type / Klem massieve RVS S Type
Size A B C W Poids
1/2’’ - 3/4’’ 25.4 63.0 60.0 17.0 0.13
10/15/20 34.0 73.0 69.0 17.0 0.17
1’’- 1 1/2’’ 50.5 78.0 85.0 17.0 0.21
2’’ 64.0 82.0 99.0 17.0 0.25
2 1/2’ 77.5 89.0 112.0 17.0 0.35
3’’ 91.0 96.0 126.0 17.0 0.42
3 1/2’’ 106.0 103.0 140.0 17.0 0.44
4’’ 119.0 110.0 154.0 17.0 0.51
4 1/2’’ 130.0 115.0 165.0 17.0 0.60
6’’ 167.0 134.0 216.0 25.0 0.88
S TYPE - 287 A
Inox 304L Poli/Gepolijst
Inox 316L Poli/Gepolijst Fabrication européene/ Europese productie
1Informations données à titre indicatif et sous réserve de modifications éventuelles | Deze inlichtingen worden alleen maar ten tittel van informatie gegeven. Eventuele veranderingen voorbehoud.
Rue de l’Eglise, 22 | B- 1367 Mont-Saint-André | T. +32 81 877 143 | F. +32 81 877 637 | [email protected] | www.balvinox.be
Industrie pharmaceutique | Farmaceutischeindustrie
Collier massif Inox SH Type / Klem massieve RVS SH Type
Size A B C W Weight
1/2’’ - 3/4’’ 25.4 63.0 75.0 17.0 0.15
1’’ - 1 1/2’’ 50.5 77.0 102.0 17.0 0.25
2’’ 64.0 93.0 123.0 17.0 0.33
2 1/2’ 77.5 100.0 140.0 17.0 0.38
3’’ 91.0 105.0 150.0 17.0 0.44
3 1/2’’ 106.0 110.0 165.0 17.0 0.44
4’’ 119.0 119.0 185.0 17.0 0.57
4 1/2’’ 130.0 119.0 191.0 17.0 0.60
5’’ 144.0 131.0 215.0 19.0 0.75
5 1/2’’ 155.0 155.0 252.0 24.0 1.39
6’’ 167.0 156.0 262.0 24.0 1.38
6 5/8’’ 183.0 164.0 280.0 24.0 1.61
8’’ 217.0 184.0 325.0 24.0 2.11
8 5/8’’ 233.0 185.0 333.0 24.0 2.25
SH - TYPE
Inox 304L Poli/Gepolijst
Inox 316L Poli/Gepolijst Fabrication européene/ Europese productie
2Informations données à titre indicatif et sous réserve de modifications éventuelles | Deze inlichtingen worden alleen maar ten tittel van informatie gegeven. Eventuele veranderingen voorbehoud.
Rue de l’Eglise, 22 | B- 1367 Mont-Saint-André | T. +32 81 877 143 | F. +32 81 877 637 | [email protected] | www.balvinox.be
Industrie pharmaceutique | Farmaceutischeindustrie
Collier massif Inox SH Type / Klem massieve RVS SH Type
SSH-TYPE
Size A B C W Poids
1/2’’ - 3/4’’ 25.4 34.0 65.0 16.0 0.16
10/15/20 34.0 42.0 74.0 18.0 0.22
1’’- 1 1/2’’ 50.5 64.0 103.0 26.0 0.66
2’’ 64.0 67.0 113.0 26.0 0.82
2 1/2’ 77.5 75.0 128.0 26.0 0.94
3’’ 91.0 80.0 137.0 26.0 1.02
3 1/2’’ 106.0 88.0 150.0 26.0 1.07
4’’ 119.0 93.0 165.0 26.0 1.27
4 1/2’’ 130.0 97.0 174.0 26.0 1.33
6’’ 167.0 132.0 240.0 26.0 1.93
6 5/8’’ 183.0 142.0 260.0 26.0 2.11
8 5/8’’ 233.0 168.0 318.0 26.0 2.52
Inox 304L Poli/Gepolijst
Inox 316L Poli/Gepolijst Fabrication européene/ Europese productie
3
Informations données à titre indicatif et sous réserve de modifications éventuelles | Deze inlichtingen worden alleen maar ten tittel van informatie gegeven. Eventuele veranderingen voorbehoud.
Rue de l’Eglise, 22 | B- 1367 Mont-Saint-André | T. +32 81 877 143 | F. +32 81 877 637 | [email protected] |
Industrie pharmaceutique | Farmaceutischeindustrie
Clamp Joint de raccord (avec rebord)/ Clamp koppeling dichting
OD IMPERIAL
Size a b
1/2’’ 22.0 10.2
3/4’’ 22.0 16.2
1’’ 50.5 22.5
1 1/2’’ 50.5 35.3
2’’ 64.0 47.8
2 1/2’’ 77.5 60.5
3’’ 91.0 73.1
4’’ 119.0 97.7
4 1/2’’ 130.0 110.3
5’’ 144.4 123.0
5 1/2’’ 155.0 135.76
6’’ 167.0 147.2
6 5/8’’ 183.0 163.1
8’’ 218.0 197.6
8 5/8’’ 233.50 213.90
10’’ 268.0 247.4
10 5/8’’ 286.10 266.3
12’’ 319.0 298.20
- EPDM
- PTFE Env/CoEur viTon
- PTFE Env/CoEur EPDM
- SiliConE PlaTinuM - TEFlon
- viTon
Industrie pharmaceutique | Farmaceutischeindustrie
1Informations données à titre indicatif et sous réserve de modifications éventuelles | Deze inlichtingen worden alleen maar ten tittel van informatie gegeven. Eventuele veranderingen voorbehoud.
Rue de l’Eglise, 22 | B- 1367 Mont-Saint-André | T. +32 81 877 143 | F. +32 81 877 637 | [email protected] | www.balvinox.be
SUR DEMANDE
- FDA Cfr Title 21 Section 177.2600- USP XXII Class VI-121°C., Section 87 & 88, Biological Reactivity Test, in Vivo- Batch-Nr Laser Marked = Traçabilité optimale (SILICONE and EPDM Gaskets only).- 3-A Sanitary Standards- USDA Standards- Cytotoxicity Criteria- E.P. 3.1.9 (European Pharmacopea) (pour SILICONE)- USP <381> (pour EPDM et VITON)- USP <661> (pour PTFE) FDA Cfr Title 21 Section 177.2600
Ø 1/2’’ - 3/4’’ Ø 1’’ - 12’’
Clamp Joint de raccord (sans rebord)/ Clamp koppeling dichting
OD IMPERIAL
2Informations données à titre indicatif et sous réserve de modifications éventuelles | Deze inlichtingen worden alleen maar ten tittel van informatie gegeven. Eventuele veranderingen voorbehoud.
Rue de l’Eglise, 22 | B- 1367 Mont-Saint-André | T. +32 81 877 143 | F. +32 81 877 637 | [email protected] | www.balvinox.be
Ø 1/2’’ - 3/4’’ Ø 1’’ - 12’’
SUR DEMANDE
- FDA Cfr Title 21 Section 177.2600- USP XXII Class VI-121°C., Section 87 & 88, Biological Reactivity Test, in Vivo- Batch-Nr Laser Marked = Traçabilité optimale (SILICONE and EPDM Gaskets only).- 3-A Sanitary Standards- USDA Standards- Cytotoxicity Criteria- E.P. 3.1.9 (European Pharmacopea) (pour SILICONE)- USP <381> (pour EPDM et VITON)- USP <661> (pour PTFE) FDA Cfr Title 21 Section 177.2600- USP XXII Class VI-121°C., Section 87 & 88, Biological Reactivity Test, in Vivo- Batch-Nr Laser Marked = Traçabilité optimale (SILICONE and EPDM Gaskets only).- 3-A Sanitary Standards- USDA Standards- Cytotoxicity Criteria- E.P. 3.1.9 (European Pharmacopea) (pour SILICONE)- USP <381> (pour EPDM et VITON)- USP <661> (pour PTFE)
Size a b
1/2’’ 22.0 10.2
3/4’’ 22.0 16.2
1’’ 50.5 22.5
1 1/2’’ 50.5 35.3
2’’ 64.0 47.8
2 1/2’’ 77.5 60.5
3’’ 91.0 73.1
4’’ 119.0 97.7
4 1/2’’ 130.0 110.3
5’’ 144.4 123.0
5 1/2’’ 155.0 135.76
6’’ 167.0 147.2
6 5/8’’ 183.0 163.1
8’’ 218.0 197.6
8 5/8’’ 233.50 213.90
10’’ 268.0 247.4
10 5/8’’ 286.10 266.3
12’’ 319.0 298.20
- EPDM
- PTFE Env/CoEur viTon
- PTFE Env/CoEur EPDM
- SiliConE PlaTinuM - TEFlon
- viTon
Industrie pharmaceutique | Farmaceutischeindustrie
Clamp Joint de raccord DIN (avec rebord)/ Clamp koppeling dichting
DIN 32 676
3Informations données à titre indicatif et sous réserve de modifications éventuelles | Deze inlichtingen worden alleen maar ten tittel van informatie gegeven. Eventuele veranderingen voorbehoud.
Rue de l’Eglise, 22 | B- 1367 Mont-Saint-André | T. +32 81 877 143 | F. +32 81 877 637 | [email protected] | www.balvinox.be
DN a b
DN 10 34.0 10.0
DN 15 34.0 16.0
DN 20 34.0 20.0
DN 25 50.5 50.5
DN 32 50.5 50.5
DN 40 50.5 50.5
DN 50 64.0 64.0
DN 65 91.0 91.0
DN 80 106.0 106.0
DN 100 119.0 119.0
DN 125 155.0 155.0
DN 150 183.0 183.0
DN 200 233.5 233.5
DN 250 268.0 268.0
DN 300 319.0 319.0
SUR DEMANDE
- FDA Cfr Title 21 Section 177.2600- USP XXII Class VI-121°C., Section 87 & 88, Biological Reactivity Test, in Vivo- Batch-Nr Laser Marked = Traçabilité optimale (SILICONE and EPDM Gaskets only).- 3-A Sanitary Standards- USDA Standards- Cytotoxicity Criteria- E.P. 3.1.9 (European Pharmacopea) (pour SILICONE)- USP <381> (pour EPDM et VITON)- USP <661> (pour PTFE) FDA Cfr Title 21 Section 177.2600- USP XXII Class VI-121°C., Section 87 & 88, Biological Reactivity Test, in Vivo- Batch-Nr Laser Marked = Traçabilité optimale (SILICONE and EPDM Gaskets only).- 3-A Sanitary Standards- USDA Standards- Cytotoxicity Criteria- E.P. 3.1.9 (European Pharmacopea) (pour SILICONE)- USP <381> (pour EPDM et VITON)- USP <661> (pour PTFE)
DN 10 - 300
- EPDM
- PTFE Env/CoEur viTon
- PTFE Env/CoEur EPDM
- SiliConE PlaTinuM - TEFlon
- viTon
Industrie pharmaceutique | Farmaceutischeindustrie
4Informations données à titre indicatif et sous réserve de modifications éventuelles | Deze inlichtingen worden alleen maar ten tittel van informatie gegeven. Eventuele veranderingen voorbehoud.
Rue de l’Eglise, 22 | B- 1367 Mont-Saint-André | T. +32 81 877 143 | F. +32 81 877 637 | [email protected] | www.balvinox.be
Clamp Joint de raccord ISO (Avec rebord)/ Clamp koppeling dichting
DN 8 / 25 - DN 10 / 25 DN 8 / 34 - DN 10/34 DN 15 - DN 300
ISO 1127
SUR DEMANDE
- FDA Cfr Title 21 Section 177.2600- USP XXII Class VI-121°C., Section 87 & 88, Biological Reactivity Test, in Vivo- Batch-Nr Laser Marked = Traçabilité optimale (SILICONE and EPDM Gaskets only).- 3-A Sanitary Standards- USDA Standards- Cytotoxicity Criteria- E.P. 3.1.9 (European Pharmacopea) (pour SILICONE)- USP <381> (pour EPDM et VITON)- USP <661> (pour PTFE) FDA Cfr Title 21 Section 177.2600- USP XXII Class VI-121°C., Section 87 & 88, Biological Reactivity Test, in Vivo- Batch-Nr Laser Marked = Traçabilité optimale (SILICONE and EPDM Gaskets only).- 3-A Sanitary Standards- USDA Standards- Cytotoxicity Criteria- E.P. 3.1.9 (European Pharmacopea) (pour SILICONE)- USP <381> (pour EPDM et VITON)- USP <661> (pour PTFE)
Size a b
DN 8 / 25 10.3 22.0
DN 8 / 34 10.3 34.0
DN 10 / 25 14.0 22.0
DN 10 / 34 14.0 34.0
DN 15 / 50.5 18.1 50.5
DN 15 / 34 18.1 34.0
DN 20 / 50.5 22.9 50.5
DN 20 / 50.5 22.9 50.5
DN 25 / 50.5 29.7 50.5
DN 32 / 50.5 38.4 50.5
DN 32 / 64 38.4 64.0
DN 40 / 64 44.3 64.0
DN 50 / 77.5 56.3 77.5
DN 65 / 91 72.10 91.0
DN 80 / 106 84.9 106.0
DN 100 / 130 110.3 130.0
DN 125 / 155 135.7 155.0
DN 150 / 183 163.1 183.0
DN 200 / 233 213.9 233.5
DN 250 / 286 267.8 286.1
DN 300 / 338 318.7 338.5
- EPDM
- PTFE Env/CoEur viTon
- PTFE Env/CoEur EPDM
- SiliConE PlaTinuM - TEFlon
- viTon
Industrie pharmaceutique | Farmaceutischeindustrie
Industrie pharmaceutique | Farmaceutischeindustrie
5Informations données à titre indicatif et sous réserve de modifications éventuelles | Deze inlichtingen worden alleen maar ten tittel van informatie gegeven. Eventuele veranderingen voorbehoud.
Rue de l’Eglise, 22 | B- 1367 Mont-Saint-André | T. +32 81 877 143 | F. +32 81 877 637 | [email protected] | www.balvinox.be
Clamp Screen gaskets
Mesh Micron Retention
Ouverture mailles (mm)
4 5156 5.166 3340 2.798 2464 2.46
10 1905 1.9112 1532 1.5316 1130 1.1318 1081 1.0820 864 0.8624 703 0.7030 516 0.5240 381 0.3850 318 0.3260 233 0.2380 140 0.14
100 140 0.14120 118 0.12150 103 0.10180 83 0.08
200 x 200 74 0.07250 x 250 61 0.06325 x 325 40 0.04
ASME-BPE standards
- EPDM Ø 1/2’’ - 6’’
- SiliConE PlaTinuM Ø 1/2’’ - 6’’
- viTon Ø 1/2’’ - 6’’ - PTFE Ø 1/2’’ - 12’’
SUR DEMANDE
- FDA Cfr Title 21 Section 177.2600 - USP XXII Class VI-121°C., Section 87 & 88, Biological Reactivity Test, in Vivo - 3-A Sanitary Standards - USDA Standards - E.P. 3.1.9 (European Pharmacopea) (pour SILICONE) - USP <381> (pour EPDM et VITON) - USP <661> (pour PTFE) FDA Cfr Title 21 Section 177.2600 - 3-A Sanitary Standards - Certificat matiere 10204/3.1
1Informations données à titre indicatif et sous réserve de modifications éventuelles | Deze inlichtingen worden alleen maar ten tittel van informatie gegeven. Eventuele veranderingen voorbehoud.
Rue de l’Eglise, 22 | B- 1367 Mont-Saint-André | T. +32 81 877 143 | F. +32 81 877 637 | [email protected] | www.balvinox.be
Clamp Adaptation Clamp/Mâle cônique BSP / Clamp Aanpassingstuk Clamp/BSP
Inox 316L Poli/Gepolijst
Ra ≤ 0,4µm Material certification 3.1 Filet BSPT/Gaz (NPT sur demande)
Industrie pharmaceutique | Farmaceutischeindustrie
DIAM. 1/2’’ - 3/4’’ 1’’ - 1’’1/2 2’’ 2’’1/2 3’’ 4’’a 28.0 28.0 35.0 50.0 60.0 60.0d6 25.0 50,5 64.0 77,5 91.0 119.0b 1/4’’ - 1/2’’ 1/4’’ - 1’’ 1/4’’ - 1’’ 1/4’’ - 1’’ 1/4’’ - 6/4’’ 1/2’’ - 2’’
OD IMPERIAL
DIN 32 676DIAM. 10 – 15 -20 25 – 32 - 40 50 65 80 100a 28 28 35 50 60 60d6 34 50,5 64 91 106 119b 1/4’’ - 1/2’’ 1/4’’ - 1’’ 1/4’’ - 1’’ 1/4’’ - 1’’ 1/4’’ - 6/4’’ 1/2’’ - 2’’
Clamp Adaptation Clamp/Femelle BSP/ Clamp Aanpassingstuk Clamp/BSP
Inox 316L Poli/Gepolijst
Ra ≤ 0,4µm Material certification 3.1 Filet BSPT/Gaz (NPT sur demande)
DIAM. 1/2’’ - 3/4’’ 1’’ - 1’’1/2 2’’ 2’’1/2 3’’ 4’’a 28.0 28.0 35.0 50.0 60.0 60.0d6 25.0 50,5 64.0 77,5 91.0 119.0b 1/4’’ - 1/2’’ 1/4’’ - 1’’ 1/4’’ - 1’’ 1/4’’ - 1’’ 1/4’’ - 6/4’’ 1/2’’ - 2’’
OD IMPERIAL
DIN 32 676DIAM. 10 – 15 -20 25 – 32 - 40 50 65 80 100a 28 28 35 50 60 60d6 34 50,5 64 91 106 119b 1/4’’ - 1/2’’ 1/4’’ - 1’’ 1/4’’ - 1’’ 1/4’’ - 1’’ 1/4’’ - 6/4’’ 1/2’’ - 2’’
Industrie pharmaceutique | FarmaceutischeindustrieClamp Embout pour flexible / Clamp Slangclampstuk
OD IMPERIAL
DIAM. 1/2’’ - 3/4’’ 1’’ - 1’’1/2 2’’ 2’’1/2 3’’ 4’’a 25 50,5 64 77,5 91 119b 40 40 58,7 59,5 78,6 86,5
d(Autres dimensionspossible sur demande)
68
1012
13,71618
21,3
68
1012
13,71618
21,325,438,1
101216182127344353
212734435368
43536883
536883
103
1Informations données à titre indicatif et sous réserve de modifications éventuelles | Deze inlichtingen worden alleen maar ten tittel van informatie gegeven. Eventuele veranderingen voorbehoud.
Rue de l’Eglise, 22 | B- 1367 Mont-Saint-André | T. +32 81 877 143 | F. +32 81 877 637 | [email protected] | www.balvinox.be
Inox 316L Poli/Gepolijst
Ra ≤ 0,4µm Material certification 3.1
DIN 32 676
DIAM. 10-15-20 25-32-40 DN 50 DN 65 DN 80 DN 100a 34 50,5 64 91 106 119b 40 40 60 80 85 90
d(Autres dimensionspossible sur demande)
68
1012
13,71618
21,3
68
1012
13,71618
21,325,438,1
101216182127344353
212734435368
43536883
536883
103
Industrie pharmaceutique | FarmaceutischeindustrieClamp Réduction concentrique / Clamp Verloop stuck concentrische
Inox 316L Poli/Gepolijst
Ra ≤ 0,4µm/0,8µm Material certification 3.1
OD IMPERIALDIAM. 3/4’’x1/2’’ 1’’x1/2’’ 1’’x3/4’’ 1’’1/2x1/2 1’’1/2x3/4 1’’1/2x1’’ 2’’x1’’1/2 2’’1/2x2’’ 3’’x2’’ 3’’x2’’1/2 4’’x3’’
d1 25 50,5 50,5 50,5 50,5 50,5 64 77,5 91 91 119d6 15,75 22,1 22,1 34,8 34,8 34,8 47,5 60,2 72,8 72,8 97,2d2 25 25 25 25 25 50,5 50,5 64 64 77,5 91d7 9,4 9,4 15,75 9,4 15,75 22,1 34,8 47,5 47,5 60,2 72,8L 54 50,8 50,8 50,8 50,8 92,4 92,4 92,4 92,4 92,4 92,4
DIN 32 676DIAM 25 x 15 25 x 20 40 x 15 40 x 20 40 x 25 50 x 40 65 x 50 80 x 50 80 x 65 100x80
a 50,5 50,5 50,5 50,5 50,5 64 91 106 106 119d6 26 26 38 38 38 50 66 81 81 100b 34 34 34 34 50,5 50,5 64 64 91 106
d7 16 19 16 19 26 38 50 50 66 81L 70 79 80 86 94
1Informations données à titre indicatif et sous réserve de modifications éventuelles | Deze inlichtingen worden alleen maar ten tittel van informatie gegeven. Eventuele veranderingen voorbehoud.
Rue de l’Eglise, 22 | B- 1367 Mont-Saint-André | T. +32 81 877 143 | F. +32 81 877 637 | [email protected] | www.balvinox.be
1Informations données à titre indicatif et sous réserve de modifications éventuelles | Deze inlichtingen worden alleen maar ten tittel van informatie gegeven. Eventuele veranderingen voorbehoud.
Rue de l’Eglise, 22 | B- 1367 Mont-Saint-André | T. +32 81 877 143 | F. +32 81 877 637 | [email protected] | www.balvinox.be
Clamp Coude 90°/ Clamp Bocht 90°
Inox 316L Poli/Gepolijst
Ra ≤ 0,4µm Material certification 3.1
OD IMPERIALDIAM. 1/2’’ 3/4’’ 1’’ 1’’1/2 2’’ 2’’1/2 3’’ 4’’a 25 25 50,5 50,5 64 77,5 91 119d6 9,4 15,75 22,1 34,8 47,5 60,2 72,8 97,2L 88 88 50 70 88,9 108 127 168
Industrie pharmaceutique | Farmaceutischeindustrie
DIAM. DN 10 DN 15 DN 20 DN 25 DN 32 DN 40 DN 50 DN 65 DN 80 DN 100a 34.0 34.0 34.0 50.5 50.5 50.5 64.0 91.0 106.0 119.0d6 10.0 16.0 19.0 26.0 32.0 38.0 50.0 66.0 81.0 100.0L 44.0 53.0 58.0 63.0 68.0 73.0 83.0 93.0 103.0 113.0
DIN 32 676
Clamp Té égal/ Clamp T-stuk
Inox 316L Poli/Gepolijst
Ra ≤ 0,4µm Material certification 3.1
OD IMPERIALDIAM. 1/2’’ 3/4’’ 1’’ 1’’1/2 2’’ 2’’1/2 3’’ 4’’a 25 25 50,5 50,5 64 77,5 91 119d6 9,4 15,75 22,1 34,8 47,5 60,2 72,8 97,2L 66.6 66.6 60.3 69.9 88.9 88.9 95,3 114,3
DIN 32 676DIAM. DN 10 DN 15 DN 20 DN 25 DN 32 DN 40 DN 50 DN 65 DN 80 DN 100a 34.0 34.0 34.0 50.5 50.5 50.5 64.0 91.0 106.0 119.0d6 10.0 16.0 19.0 26.0 32.0 38.0 50.0 66.0 81.0 100.0L 39.0 48.0 53.0 63.0 68.0 73.0 83.0 93.0 103.0 113.0
CLAMP Clapet anti-retour 316 L poli - TFM®1705 (Art. 048)/ Clamp Terugslagklep
1Informations données à titre indicatif et sous réserve de modifications éventuelles | Deze inlichtingen worden alleen maar ten tittel van informatie gegeven. Eventuele veranderingen voorbehoud.
Rue de l’Eglise, 22 | B- 1367 Mont-Saint-André | T. +32 81 877 143 | F. +32 81 877 637 | [email protected] | www.balvinox.be
Designed for Aseptic and High Purity Applications. Two material: PTFE and AISI 316L without asymptotic seals. Internal design free from entrapment areas, no screws or threadings or O-Rings inside the valve. PTFE piston full machined from solid and extra-soft AISI 316L spring. Laser marking for traceability and validation processes. Material 3.1 certificates, FDA or USP, internal surface finishing check as standard. Int. finishing : Ra ≤ 0,4 µm Ext. finishing: Ra ≤ 0,8 µm Mirror Polished
Max Working Conditions: 10 bar (120 psi) and 150°C (300°F) Gaskets: USP CLASS VI – 70° PTFE or USP CLASS VI – 121° PTFE
OD IMPERIAL
N° Name Material1 Short Body AISI 316L2 Clamp AISI 3043 Clamp Gasket PTFE4 Spring AISI 316L5 Piston PTFE6 Long Body AISI 316L
Industrie pharmaceutique | Farmaceutischeindustrie
Diam. BAR PSI1/2’’ 0.025 0.36
3/4’’ 0.020 0.29
1’’ 0.010 0.15
1 1/2’’ 0.010 0.15
2’’ 0.010 0.15
2 1/2’’ 0.010 0.15
Diam. BAR PSI1/2’’ 0.03 0.44
3/4’’ 0.025 0.36
1’’ 0.025 0.36
1 1/2’’ 0.025 0.36
2’’ 0.025 0.36
2 1/2’’ 0.03 0.44
Diam. BAR PSI1/2’’ 0.010 0.15
3/4’’ 0.010 0.15
1’’ 0.010 0.15
1 1/2’’ 0.010 0.15
2’’ 0.015 0.22
2 1/2’’ 0.015 0.22
Pression d’ouverture indicative - Minimum opening pressure - Indicative data only
DIAM. 1/2’’’ 3/4’ 1’’ 1’’1/2 2’’ 2 1/2’’A 25.0 25.0 50,4 50,54 63.9 77.4
B 9.4 15.75 22,1 34,8 47.5 60.2
L 70.0 70.0 85.0 90.0 125.0 125.0