october 2013 pl-t horizontal burning instructions reema sharma
TRANSCRIPT
![Page 1: October 2013 PL-T Horizontal Burning Instructions Reema Sharma](https://reader037.vdocuments.us/reader037/viewer/2022102923/5519ea12550346443e8b5295/html5/thumbnails/1.jpg)
October 2013
PL-T Horizontal Burning Instructions
Reema Sharma
![Page 2: October 2013 PL-T Horizontal Burning Instructions Reema Sharma](https://reader037.vdocuments.us/reader037/viewer/2022102923/5519ea12550346443e8b5295/html5/thumbnails/2.jpg)
2
Philips PL-T Bended Lamp Installation
When Philips PL-T Bended* lamps are installed in horizontal position, the Philips etch should be positioned facing UP, or as close as possible if the sockets are at an angle.
*PL-T Bended lamps consist of 3 bended tubes linked together in two places.
Philips Etch
![Page 3: October 2013 PL-T Horizontal Burning Instructions Reema Sharma](https://reader037.vdocuments.us/reader037/viewer/2022102923/5519ea12550346443e8b5295/html5/thumbnails/3.jpg)
3
Philips PL-T Bridged Lamp Installation
When Philips PL-T Bridged* lamps are installed in horizontal position, the Philips etch should be positioned facing DOWN, or as close as possible if the sockets are at an angle.
*PL-T Bridged lamps consist of six straight tubes linked together in five places. Philips Etch
![Page 4: October 2013 PL-T Horizontal Burning Instructions Reema Sharma](https://reader037.vdocuments.us/reader037/viewer/2022102923/5519ea12550346443e8b5295/html5/thumbnails/4.jpg)
4
Literature
Product Bulletins: Bended and Bridged including XEW
![Page 5: October 2013 PL-T Horizontal Burning Instructions Reema Sharma](https://reader037.vdocuments.us/reader037/viewer/2022102923/5519ea12550346443e8b5295/html5/thumbnails/5.jpg)
5
For horizontal application, install lamp with etch facing down
Pour une application horizontale, installer la lampe gravure vers le bas
Inner box packaging (example)