occidental leather 2010...8580 - fatlip tool bag set signature design for production carpenters....

w w w . b e s t b e l t . c o m

®2010

On Your Side for Over 30 Years!

Occidental Leather

Phone: 707-824-2560 Fax: 707-824-2570 e-mail: [email protected]

Customer CareOccidental’s customer loyalty team is second to none. Our customers always come first. Our staff offers technical advice regarding the selection and use of products. We coordinate with our shipping and manufacturing departments to ensure prompt and accurate shipping. Our website (www.bestbelt.com) provides complete product information and referrals to dealers nationwide. Direct links to on-line suppliers are provided.

2 Year WarrantyOccidental will repair or replace (at our option) any item or set component found to be defective in materials or workmanship within two years of the original retail purchase. Call customer service for details.

What is Not Covered

• Normal wear and tear, including abrasion, punctures, cuts, fading, etc.

• An entire set when one component is in question• Damage caused by misuse or abuse.

• Cost of shipment to Occidental

Repair Policy

Lifetime repair service is provided only for our all-leather products. Call for details.

You may reach customer care Monday through Friday from 8 a.m. to 3:30 p.m. (Pacific Time).

ContentsTool Belt Systems ....................................................1-5

Tool and Fastener Bags ......................................... 6-9

Tool Vests & Beltless™ Systems ........................ 10-13

Suspender Systems .................................................. 14

Belts .......................................................................... 15

Tool Holders & Accessories ................................. 16-17

Tool Totes & Carry Bags ......................................18-20

Oxy™ Gifts ................................................................ 21

Occidental leather®

Left-Handed BuildersWe are the only manufacturer that provides our most popular styles in a mirror image design for lefties (at no extra charge). Throughout the catalog, products which are also available in left hand models are indicated with the symbol (the right hand model is shown). In left handed sets, the tool bag is then worn on the left side and the fastener bag is worn on the right side.

5018DB 5018DBLH

Right-Handed Carpenter Left-Handed Carpenter

From All of Us at Occidental, Thank You for Your Support

1

For Details on our Entire Line, Including Full Photos & Specs, Visit us on the web at: www.bestbelt .com

See Pg. 15 to Size Your Belt

PrO leather™ SerieS

• Premium Top-Grain Leather• Copper Rivets Reinforce Main Bags• Hand-Specific Tool Holders Promote

Maximum Working Rhythm on the Job• Function Engineered for the Modern Builder

The Pro Leather Series is constructed of premium top grain cow hides tanned to our stringent specifications with a special blend of oils and waxes that meet the demands of heavy use in the elements.

5191(shown)

The Classic Original Design for 30 Years!5191 - Pro Carpenter’s™ 5 Bag Assembly

Fully loaded with 22 pockets and tool holders. The buscadero one-piece design forms to your body, distributing the load evenly and maximum comfort is enhanced by the sheepskin lining. This handcrafted, American classic is sure to become one of your most valued and trusted tools. Features same popular bag configurations as our leather fastener and tool bags.Pockets and Tool Holders: 22 Belt Sizes: SM-XL Weight: 5.8 lb.

Setting the standard of the industry since 1980!

5018DB

5035

5012

5060

5080DB Pro Framer™ Set

For 30 years, the Pro Framer™ has been the benchmark by which all other tool belts have been measured. Designed by and for the professional builder, this traditional belt set is fine tuned for optimum efficiency and comfort.Available for lefties in option. Pockets and Tool Holders: 22 Belt Sizes: SM-XXXL Weight: 5.3 lb.

Available in Adjust-to-Fit™ Comfort Series - 9550 pg 5

Available in Classic 5080DB Style in Black Leather as B5080DB

Available with Single Outer Bag and no Tape Holder as 5078

Available with Narrower Bags for Compact Trim Work as 6100T

*Select Products Available

for Lefties as well (5080DBLH, B5080DBLH,

5087LH, 5089LH)

Available with Additional Outer Bag on Fastener Side as 5089

Available with Tape Holder on Fastener Bag as 5087

2



Green BuildinG SerieS™

Green Building™ Bags are loaded with the features professional contractors require. All leather, comfortable, ultra-soft, functional tool bags with no break-in required. Available with Hunter Green or Classic Black leather bags.

Now you have the opportunity to help the environment with your tool belt purchases. Every time you purchase a Green Building Series™ product; Occidental makes a contribution to the National Audubon Society.

Audubon's mission is to conserve and restore natural ecosystems, focusing on birds, other wildlife, and their habitats for the benefit of humanity and the earth's biological diversity.

5625(shown)

5612

5035

5020

5611

B5612

50355020

B5611

Green Builder Bags™ Tool Belt Set (Green = 5625) / (Black = B5625)

Light-weight hunter green, all leather tool and fastener bags! Main bags feature reinforced back wall at stress points to insure years of durable wear. Set includes our benchmark heavy duty leather framing belt.Left side fastener bag offers side by side 35’ tape holster and an upper bag; external sleeve pockets, drill bit holsters, angle square holster and one internal 2003 - Oxy Tool Shield™.Right side tool bag offers external leather hammer holder, double outer bags; internal storage includes one 2003 - Oxy Tool Shield™, pockets for level, chisel, drill bits, pencils, knife and crayon.Pockets and Tool Holders: 24 Belt Sizes: SM-XXXL Weight: 5.8 lb. Available for lefties in option as B5625LH.

Also Available in Adjust-to-Fit™ Comfort Series as B9588 pg 5

5602

50355059

5601

5605 - Green Lights™ These bags feature a more supple and slightly lighter leather with a broken in feel. The bag color is Hunter Green and corners are reinforced with our trademark Oxy Red™ Leather.Pockets and Tool Holders: 19 Belt Sizes: SM-XXXL Weight: 5.1 lb.

Also Available in Adjust-to-Fit™ Comfort Series as 9556 pg 5

NEW!

NEW!

NEW!

3



Benchmark nylOn SerieS

Leather and industrial nylon intelligently combined to lighten the builder’s load. The trademark OxyRed™ leather reinforces the main bag corners as well as provides our NoSpill™ system of all leather tool holders.

9521

8003

5020

9520

9525 - The Finisher SetSuper-lightweight at 3.1 pounds! Compact bag design is ideal for trim, framing and finish work. Innovative, round-bottom, two-ply foam core main and outer bags hold their shape empty or loaded. Available for lefties in option.Pockets and Tool Holders: 23 Belt Sizes: SM-XXL Weight: 3.1 lb. Available in Adjust-

to-Fit™ Comfort Series - 9540 pg 5

Available in Adjust-to-Fit™ Comfort Series pg 4 Black (9850) - Cafè (9855)

8582

50355020

8581

8580 - FatLip™ Tool Bag Set Signature design for production carpenters. 10” deep! main bags reinforced with full leather bottom. Innovative FatLip™ mouth stays open to promote comfort and a smooth hand and tool access. Pockets and Tool Holders: 25 Belt Sizes: SM-XXXL Weight: 5.0 lb.

8018DB

5035

5012

8060

8080DB - OxyLights™ Framer The OxyLight™ Framer sets are Identical to the style and functional design of our all-leather Pro Framer™ tool belt sets in a lighter weight alternative. Available for lefties in option.Pockets and Tool Holders: 21 Belt Sizes: SM-XXXL Weight: 4.4 lb.

Same design as 8080DB Available in Black Nylon as B8080DB

Same as the 8086 Available in Adjust-to-Fit™ as 9515

Available with Divided Outer Bag on Fastener Side as 8086

Available with Additional Outer Bag on Fastener Side as 8089

The Classic Original Design for 20 Years!

NEW - 30th Anniversary FatLip™ DesignNEW!

NEW!

FatLip™

Bags

4

Visit out website to see a demo of our Adjust-to-Fit™ Series at: www.bestbelt .com

adjuSt-tO-Fit™ SerieS

The Adjust-to-Fit™ accommodates small to extra large sizes in one easy step. You can go from summer shorts to winter clothing and still wear the same set!

These benchmark designs offer “hand specific” intuitive tool holder placement provide excellent field function, improved job performance and maximum comfort thanks to the extra wide hip areas.

9556(shown)

9855 - AdjusttoFit™ FatLip™ Set - Cafè -

Signature design for production carpenters. 10” deep! main bags reinforced with full leather bottom. Innovative leather FatLip™ mouth stays open to promote comfort and smooth hand access to tools and fasteners. Field functional, handcrafted bags incorporated with our AdjusttoFit™ belt system. Featuring extra wide hip areas for maximum comfort that adjusts to a full range of sizes and seasons!Available for lefties in option.Pockets and Tool Holders: 24 Weight: 5.2 lb. Also Available in

Black as 9850

New Logo • New Color • New Design • Same Legendary Quality

• Maximum Comfort• Adjusts-to-Fit Pant Waist 32” to 41” in 1 easy step.

(one belt for all seasons!)• 12 oz Leather Belt Tongue with Steel Roller Buckle• Suspension System Suspender hardware is

factory installed, just clip and go!

8537

5020

Free Gizmo Holster

9515 - Adjust-to-Fit™ OxyLight™ Framer

Our most popular nylon framing bags (B8064 fastener and B8017DB tool bag). Features a removable hammer holder (5059) on rear. Left side fastener bag holsters a speed square and features patented* Oxy Dual Bag™ outer bags providing multiple fastener capacity and a square holster in a compact space.Available for lefties in option.Pockets and Tool Holders: 24 Weight: 4.2 lb.

Available Belt Worn - 8085 pg 3* Patent No.: US D531,401 S

5059

B8064 Style B8017DB

Style

8582 Style

8581 Style

AdjustableSpacing

NEW!

5

Visit out website to see a demo of our Adjust-to-Fit™ Series at: www.bestbelt .com

adjuSt-tO-Fit™ SerieS

B9588 - Adjust-to-Fit™ Green Building™ Tool Belt Set - In Black

The most comfortable belt made featuring the Green Building™ black leather framing bags (B5611 fastener and B5612 tool bag). The Classic Black bag leather is a softer, slightly lighter weight than the traditional leather framing bags, feels like they are already broken in! Corners are reinforced with our trademark Oxy Red™ Leather.Pockets and Tool Holders: 24 Weight: 5.9 lb. Available Belt Worn -

B5625 pg 2

9556 - Adjust-to-Fit™ Green Lights™ Leather Tool Belt Set

The most comfortable belt made featuring the popular Green Lights™ leather framing bags. The Hunter Green bag leather is a softer, slightly lighter weight than our traditional leather framing bags, feels like they are already broken in! Corners are reinforced with Oxy Red™ Leather.Pockets and Tool Holders: 24 Weight: 5.4 lb.

AdjustableSpacing

Available Belt Worn - 5605 pg 2

AdjustableSpacing

5059

5059

* Patent No.: US D531,401 S

B5612 Style

5602 Style

B5611 Style

5601 Style

9550 - Adjust-to-Fit™ Pro Framer™Our classic leather framing bags (5060 and 5017DB style bags). Features a removable hammer holder (5059) on rear.Available for lefties in option.Pockets and Tool Holders: 24 Weight: 5.2 lb.

AdjustableSpacing

Available Belt Worn - 5080DB pg 1

5059

9540 - Adjust-to-Fit™ Finisher™Compact bag design is ideal for trim, light framing and finish work. Innovative, round-bottom, full capacity, two-ply foam core main and outer bags hold their shape empty or loaded.Left side fastener bag holsters a speed square and features patented* Oxy Dual Bag™ outer bags providing multiple fastener capacity and a square holster in a compact space.Pockets and Tool Holders: 24 Weight: 4.0 lb.

Available Belt Worn - 9525 pg 3

5059

AdjustableSpacing

NEW!

9521 Style

9520 Style

5017DB Style

5060 Style

6

For more detail and multiple views of these bags, visit us on the web at: www.bestbelt .com

tOOl BaGS

5018DB

Other Leather Tool Bag Versions

Other Nylon Tool Bag Versions

9”

8”5½”

Leather Tool BagsOur most popular tool bag features double outer bags and holders for pencils, work knife, lumber crayon, chisel, torpedo level, hammer and a holster for tapes up to a 35’ tape.The ProLeather™ Series is constructed of premium top grain cow hides, tanned to our stringent specifications with a special blend of oils and waxes that meet the demands of heavy outdoor use.

Tool Bags hold the tools most often accessed with the right hand such as hammer, pencils, utility knife, chisels. They are worn on the right side of the body. Hand specific tool holder designs promote working rhythm on the job.

5018DB - Inside View

5”

OxyLights™ Tool BagsOur most popular OxyLights™ tool bag. Holders for pencils, work knife, for a 35’ tape.Leather and industrial nylon intelligently combined to lighten the builder’s load. The trademark OxyRed™ leather reinforces the main bag corners as well as provides our NoSpill™ system of all leather tool holders.

8018DB10”

8”5½”

5”8018DB - Inside View

B5018DB - 3 Pouch ProTool™ Bag

Same design in our Black Leather

5017DB - 3 Pouch ProTool™ Bag

No high mount tape holder.

5017 - 2 Pouch ProTool™ Bag

Single outer bag & no tape holder.

6102 - Pro Trimmer™ Bag

Narrower, 7½” wide bag.

5612 -Green Building Tool Bag

Green leather, new design - 10” x 9”

B5612 -Green Building Tool Bag

Black leather, new design - 10” x 9”

5602 -Green Lights™ Tool Bag

Supple leather in Hunter Green.

8017 - OxyLights™ 2 Pouch Tool Bag

Single outer bag & no tape holder.

B8018DB - OxyLights™ 3 Pouch Tool Bag

Same design in our Black nylon.

B8017DB - 3 Pouch ProTool™ Bag

No high mount tape holder, black nylon.

8582 - FatLip™ Tool Bag

New FatLip™ design with 10” deep bags.

9521 -Oxy Finisher™ Tool Bag

Ideal for trim & light framing. (9½” x 7½”)

1576 - Pro Commercial™ Tool Bag

Our largest electrician’s bag with 21 tool holders.

NEW! NEW!

NEW!

NEW!

7


Other Nylon Fastener Bag Versions

Other Leather Fastener Bag Versions

FaStener BaGS

Leather Fastener BagsThe ProLeather™ Series is constructed of premium top grain cow hides, tanned to our stringent specifications with a special blend of oils and waxes that meet the demands of heavy outdoor use.Our most popular fastener bags. Highly recommended for framing and general carpentry applications. Holders for 1” blade square, angle square, cat’s paw loop, driver bits, etc.

50609”

8”

6”

7”

Fastener Bags hold the fasteners and tools most often accessed with the left hand such as nails, tri-square, nail sets, cat’s paw, driver bits, angle square. They are worn on the left side of the body.

5060 - Inside View

OxyLights™ Fastener BagsLeather and industrial nylon intelligently combined to lighten the builder’s load. The trademark OxyRed™ leather reinforces the main bag corners as well as provides our NoSpill™ system of all leather tool holders.For framing and general carpentry applications. Holders for 1” blade square, angle square, cat’s paw loop, driver bits, etc.

806010”

8”

6”

8”8060 - Inside View

B5060 - 3 Pouch ProFastener™

Same design in our Black Leather.

5062 - 4 Pouch ProFastener™

Same design with an extra outer bag.

5061 - 2 Pouch ProFastener™

With high mount tape holder.

6101 - Pro Trimmer™ Bag

Narrower, 7½” wide bag.

5611 -Green Building Fastener

Green leather, new design - 10” x 9”

B5611 -Green Building Fastener

Black leather, new design - 10” x 9”

5601 -Green Lights™ Fastener

Supple leather in Hunter Green.

B8060 - OxyLights™ 3 Pouch Fastener Bag

Same design in our Black nylon.

8062 - OxyLights™ 4 Pouch Fastener Bag

Same design with an extra outer bag.

B8064 - OxyLights™ Fastener Bag

4 bags. Unique 2-in-1 divided outer bag.

9520 -Oxy Finisher™ Fastener Bag

Ideal for trim & light framing. (9½” x 7½”)

1577 - Pro Commercial™ Fastener

Our largest electrician’s bag with 11 tool holders.

8581 - FatLip™ Fastener Bag

New FatLip™ design with 10” deep bags

NEW! NEW!

NEW!

NEW!

8


SPeciality tOOl BaGS

5072 - Pro Lather™ Drywall PouchLarge style, all leather pouch. Suitable for both lathers and drywall pros. Exceptional tool organization and durability. Holders for circle cutter, metal snips, saw, knife, Surform®, pencils. (8” x 6”)Available for lefties in option as 5072LH.

8”

6”

5072 - Inside View

Utility BagsUtility Bags are straightforward, serviceable bags without individual tool holders and are worn on either side of the body, or in the rear. They are available in a variety of sizes to accommodate your individual work habits.

5023B - Inside View

9”

8”

5½”

6”

5023B

Other Speciality Tool Bag Versions

Other Utility Bag Versions

1555 - Nylon Electrician’s Pouch

Compact design features 15 custom tool holders. (6½” x 6”)

5024 - Large Pro Leather™ Utility Bag

Our largest all leather bag. No tool holders. (10” x 10”)

5049 - Telecom Pouch

All Leather pouch with 14 tool holders for Electricians & Telcom Professionals. (6” x 6”)

5019 - Pro Leather™ Utility Bag

Compact pouch. Great for third bag in back. (8” x 7½”)

5075 - Pro Drywall ™

Designed with the California Drywall/Lathing Union (6½” x 6”)

6104 - Compact Utility Bag

Compact plain leather bag with outer bag. (8” x 7½”)

5085 - Engineer’s Tool Case

Maximum leather tool organization w/ 17 tool holders. (11” x 2” x 7”)

9025 - 6-in-1 Pouch

Compact multi-function pouch with 6 tool holders in one. (6½” x 7”)

5500 - Electrician’s Tool Pouch

Leather pouch with 15 tool holders for today’s electrician. (6½” x 6”)

B9019 - Nylon Universal Bag - Black

Single pouch design with padded double wall nylon. (6½” x 7”)

9085 -Stronghold®

Tool Case

Ideal for master finish carpenter or plant engineers. (9” x 8”)

G9019 - Nylon Universal Bag - Green

Single pouch design with padded double wall nylon. (6½” x 7”)

9


SPeciality tOOl BaGS

Clip-On Bags for our Oxy™ Tool Chest & Builders’ Vest (pg 10)

Other Clip-On Pouch Versions

Other Drill Holster Versions

Clip-On PouchesCost efficient fastener management! Single clip-on bags make it easy to switch to different applications. Cost efficient fastener management! Keep them fully loaded and neatly lined up in your truck or clipped to your toolbox when not in use. Also can be used to add fastener storage or sub divide existing main bags.

Drill HolstersDesigned to comfortably fit most cordless drills and provide quick draw ease of access to all drills. Belt worn versions accept up to a 3” work belt.

8567 - Belt Worn Drill Holster

Very compact belt worn drill holster accepts most drills. Features formed leather core.

8565 - Clip-On Drill Holster

Clip-on bag with removable fastener pouch (9511) specially designed for our Builders’ Vest and Oxy™ Tool Chest (pg 10).

9502

8567 8565

5066 - Drill Holster

All leather heavy duty angled body holster for increased balance and comfort with 2 holders for drill or driver bits. Fits most cordless drills. Available for Lefties as well (5066LH)

5066 - Inside View

5066

9503 - Large Clip-On Pouch (7½” x 6”)

Perfect for small jobs or the DIY weekend projects.

8550 Clip-On Builders’ Bag

Deluxe fastener bag for use with our vests. (10” x 8”)

2012 Clip-On Universal Pouch

Universal bag designed for use with our vests (9” x 8”)

2011 Clip-On Vest Tool Bag

Tool bag designed for use with our vests (10” x 8”)

2010 Clip-On Vest Fastener Bag

Fastener bag designed for use with our vests (10” x 8”)

9504 - Clip-On 7 Pouch (7½” x 6”)

Portable clip-on bag. Great for small projects.

9511 - Clip-On Deep Pouch (5” x 6”)

9501 -Clip-On Pouch (5” x 4½”)

Cost effective enough to have all your favorite fasteners in their own pouch. Always at the ready for any application.

5”

6”

4½”

10”

7”

NEW! NEW!

NEW! NEW!

NEW!

10


Oxy™ tOOl cheSt

• Exceptional Comfort• Freedom of Movement• Maximum Tool Capacity• Superior Load Distribution• Easy On and Off

2008 - Oxy™ Tool ChestRhythm of movement and comfort through ergonomic weight and tool distribution. The tools are worn on each side of the vest, distributing the weight to the upper body instead of the lower back. Includes holders for all the most commonly used tools with easy “cross draw” access. Vest may be removed and hung by “D” ring at the job site then tools and fasteners can be easily accessed. The fully adjustable system allows ample room for winter clothing.

Removable Divided Side Bag Doubles as Cordless Drill Nest

Front & Rear Hammer Holders

2 Large Sleeve Pockets on Each Side (one top entry & one side entry)

Removable 2-in-1 Bags Yield 4 Pouches

Plus Angle Square Holster

Large Sleeve Pocket Accepts Angle Squares, Misc. Tools, Cell Phones, etc.

Small Pouch Accepts Large

Tapes, Fasteners

Removable Pocket Shield (2006) for

Sharp Tool

Comfortable FoamShoulder Padding

Padded Yoke Lined With Dri-Lex® to Wick Away

Perspiration

2535 - Builders’ Vest™Compact vest tool carrying system, loaded with tool holders and pockets. Can be worn as an independent vest tool carry system or with optional clip-on bags. Ideal organization; ergonomic design, even load distribution, and total freedom of movement. Sixteen holders and pockets plus a removable pouch. Supplied with one 2003 Pocket Shield™ (for sharp knife or chisel)!

2538 - Builders’ Vest™ Drill PackageBuilt from the 2535 Builders’ Vest, 8565 Clip-On Drill Holster, and the 8550 Clip-On Builders’ Bag.

2020 - Oxy™ Tool Chest Package

Same construction as the 2008 with the addition of the B9019 rear nylon pouch.

2540 - Builders’ Vest™ PackageThis vest package is built from the 2535 Builders’ Vest and 2 of the 2012 Clip-On Universal Pouches.

Vest may be worn with or without a tool belt

2” deep driver bit pockets Sleeve pocket

for note pad

Removable clip-on utility

pouch

Protected pocket for work knife

Hardware for attachment of

optional bag or tape measure

Large utility pocket with Velcro® closure for calculator, tape

measure, etc...

2 Pencil Pockets2 Pen Pockets

2020- Package

25402538

B9019

NEW!

11


Maximum Comfort Carry tools and equipment with equal weight distribution. Lessen fatigue and help prevent lower back pain!

Security Pocket with Leather Flap for safety glasses and more.

Bonus! - 2 Oxy Tool Shields™ (2003 - Included) Safely holds sharp tools. Extra protection for your tools, bags, and body!

Functional OrganizationThe wide shoulder, open-back

design promotes air flow and has 28 pockets and

tool holders.

Very LightweightOnly 2½ pounds!

Fully Adjustable

2 Upper PouchesFor fasteners or tools.

Oxy™ PrO WOrk VeStS

9502

Suitable for finish carpenters, electricians, plumbers, cabinetmakers, maintenance technicians, and home hobbyists.

9502 6568

2575 - Oxy™ Pro Work VestThe Oxy™ Pro Work Vest is a great alternative system for all the trades and better than an apron. Intuitive pockets for speed square, gloves, tape measure, pencils, small notebooks, and a torpedo level! Great attention is paid to the details to insure years of hard wear. Stress points, edges and pockets are all reinforced with nylon. This versatile design has passed every field test and promotes smooth working rhythm on the job.Available for lefties in option as 9575LH.

2555 - Oxy™ Cordless Tool VestThe Oxy™ Cordless Tool Vest is for professionals that run screws and drill guns continuously such as deck construction, metal framing etc. On the right side the Patented 2-in-1 design holster is suitable for cordless drills, screw guns, or a framing hammer. Leather lining ensures years of continuous use.Left side has a sleeve pocket plus a two in one outer pouch. Intuitive pockets and holders for, tape measure, pencils, small notebook, torpedo level and, a screw gun or hammer!Extremely light weight ergonomically balanced and better than an apron. Every detail insures years of hard wear. Stress points, edges and pockets are all reinforced with nylon.

Roomy Integrated Cargo Pockets for fasteners feature 5 attachment points, for optional

clip-on accessories. (see pages 16-17)

Triangle “D” at Center Back for Easy Hang-up Storage

Rear Mounted D-Ring for Easy Hang-Up & Storage(not for safety attachment)

Tool bag can also serve as a padded hammer holder

NEW!

12


StrOnGhOld® SuSPendaVeSt™

D-Ring for Hanging Storage

All Straps Fully Adjustable

Large Utility Holder

Multiple Tool Holders

Right Rear Hammer Holder

2 Large Sleeve Pockets on Each Side (one top entry & one rear entry)

Wide Padded Shoulder Support Lined With Dri-Lex® to Wick

Away Perspiration

Large Rear Entry Pocket for Work

Gloves, etc.

The Tool Carrying Alternative to Suspenders

2500 - Stronghold® SuspendaVest™The 2500 allows the flexibility to build your own “belt free” system using bags of your choice. Loaded with features and enough tool holders to do most jobs even without bags! 17 pockets and holders for all commonly used tools as well as plenty of extra storage for cell phone, note pads, calculator, etc. The leather belting sections disconnect at the rear to accept any bag that accommodates a 3” belt. Create a custom rig to fit your specific work habits and needs. Snaps on and off in seconds with a quick release chest strap buckle. Features a “D” ring for hanging storage! Nylon suspension vest with torso worn tool holders, eliminates clutter, maximizes comfort and efficiency. Remove your bags from the SuspendaVest™ for finish work or use in tight spots. Wear your bags on your tool belt when desired.Available for lefties in option.

Install Your Bags Here

• Maximum Comfort• Accepts ANY Occidental Bag

• Freedom of Movement• Even Load Distribution

• Freedom from Tool Clutter • Ergonomically Designed

2580 - SuspendaVest™ Oxy Light™ Package

2500 vest, packaged with the B8064, a 4 pouch fastener bag with angle square holster, tri-square sleeve, cat’s paw loop and nail set pouches and the B8017 tool bag with holders for torpedo level, chisels, pencils, crayon, knife and hammer. Six bags total. 1 Pocket Shield (2006) included as well.Available for lefties in option.

2550 - SuspendaVest™ Leather Package2500 vest, packaged vest system with our best selling leather framing bags. The 5060 fastener bag, offers an angle square holster, tri-square sleeve, cat’s paw loop, nail set pouches plus the 5017DB tool bag with holders for torpedo level, chisels, pencils, crayon, knife and hammer. The double outer bags make this system a 6 bag framing set! 1 Pocket Shield (2006) included as well.Available for lefties in option.

5017DB

5060B8017DB B8064

13


StrOnGhOld® BeltleSS™ SerieS

Winter GearThe Stronghold® Beltless™ System accommodates harsh winter gear and bulky clothing.

Comfort In Any Position


Pockets for Pencils or Clip-On Items Located on Both Sides of System

Padded Yoke Lined With Dri-Lex® to Wick Away

Perspiration

U-Shape Bag Design for Full Fist™ Access

5045 - Stronghold® Beltless™ Extension Kit

For the big and tall professional. Straps add 10” to total length of suspenders and back strap adds up to an extra 6” between bags in back.

8098 - Stronghold® Beltless™ Package

The Stronghold® Beltless™ Systems are built on the solid foundation of our Stronghold® Suspension System. Combining unrivaled comfort, stability, and load distribution with the innovative Full Fist™ bag design. Not only is this the most comfortable framing rig you will ever wear, it is function engineered to move with you and securely hold a greater assortment of tools than most other systems. Experience greater range of motion, balanced tool carrying capacity, and lower back relief through freedom from a tool belt. Sleeves on suspension system accept a wide variety of clip-on tool holders and accessories. Fully adjustable.*

*The big & tall builder (over 6’2”) may need our extension kit #5045 for proper fit.

Total Freedom Of Movement

Abundant Tool Holders

Even Weight DistributionFunction Engineered

For The Way You Work

Hand-Specific Tool Placement

5592 - Beltless™ Retro KitThis kit is for those who already own our 5055 Stronghold® Suspension System and wish to go Beltless™ with any of our traditional bags to suit your custom needs.

5093 - Stronghold® Beltless™ 6-Bag Framer

Time-tested with the features of the 5017DB and 5062 traditional all-leather bags in the Beltless™ System.

14


SuSPender SyStemS

5055 - Stronghold® Suspension System• Exceptional Comfort• Even Load Distribution• Pockets for Pencils or Clip-On Items• Padded Yoke Lined With Dri-Lex® to Wick Away

Perspiration• Easy On-Off• Fully Adjustable Fit*

Extremely comfortable padded and contoured yoke relieves hip and lower back pain. This design keeps straps from wandering off your shoulders and distributes weight evenly. Yoke is lined with a special material that wicks away moisture. The leather loop attachment system for up to a 3” belt is included. Easy on & off, just release the adjustable chest strap and hang up your whole rig with the heavy duty “D” ring provided in center of yoke.

D-Ring is Not To Be Used As A Safety Connection!

* The big & tall builder (over 6’2”) may need our Suspender Extensions kit 5044 for proper fit.

1546 - Stronghold® LightsUltra-light industrial nylon suspension set features pockets at chest height for pencils or clip-on items. Extremely comfortable providing even weight distribution. Heavy duty spring clips snap on and off the leather loop attachment system (included). Fully adjustable front and rear. Just slide onto your belt and get to work. For installation on additional belts, use Installation Kit 5509.

5009 - Leather Work SuspendersOur traditional heavy duty leather suspenders. Hand crafted from belting leather, these work horse suspenders feature large shoulder pads. Heavy duty spring clips snap on and off. The leather loop attachment system for up to a 3” belt is included. For installation on additional belts, use Installation Kit 5509.

9020B - Oxy™ Nylon SuspendersManufactured by Occidental Leather, these are serious nylon suspenders designed to hold your pants or tool belts. If you want nylon suspenders, these are the ones. Extra heavy 2” wide straps are fully adjustable both front and rear (non-stretching). Heavy harness leather rear spreader. Quality super heavy clamps.

5009

1546

9020B

Leather loops included for secure attachment to you tool belt.

Conway Buckle for secure adjustment.


Adjustable Chest Strap

15


tOOl & Pant BeltS

REMEMBER: Pant waist and tool belt sizes differ by about 4”

Place your existing tool belt in a straight line and measure from the end of the buckle to the most commonly used hole. Select the belt size (by mid point) that is closest to your measurement. If you do not currently have a tool belt to measure, you can get an approximate tool belt size by adding 4” to your pant waist size.

Small .......................... 34”Medium ...................... 37”Large ...........................41”X-Large ....................... 45”XX-Large .................... 49”XXX-Large* ................ 53”

Mid Point with 4” of Range Each Way

How to Size Your tool Belt

(29” to 32”)(33” to 35”)(36” to 39”)(40” to 44”)(45” to 49”)(50” to 54”)

Mid ApproximateSize Point Pant Waist

*XXX-Large only available in 5035

5008 - 1½” Working Man’s Pant Belt

Extra heavy duty pant belt constructed of Bridle leather, custom tanned to our specifications in the USA. Edge stitched for quality, appearance and strength. Heavy duty 1½” steel roller buckle with a nickel finish.

5008 - Pant Belt Sizes SM........ 29-32” M ......... 33-35” LG ........ 36-39” XL ........40-44”

6505 Pant Belt Sizes34” 36” 38” 40”

42” 44” 46” 48”

6505 - 1½” Bridle Leather Pant Belts

What Makes an Occidental Belt?

It’s the way each stitch is precisely sewn for optimum durability and beauty. It’s the way all leather edges are hand burnished and sealed. It’s the look and utility of the 1½” solid brass buckle with a brushed nickel finish (featuring a custom designed seamless roller).Vegetable tanned authentic American bridle leather is made from heavy, high quality, domestic steer hides and drum dyed for deep, consistent colors. American bridle leather belts provide and maintain outstanding durability and timeless style.

Other Tool Belt & Belt Accessory Versions

5006 - Hip Pads with Sheepskin

Thick-pile, sheepskin lined leather hip pads slide on belt under tool bags. Slots accept all tool belts up to 3” wide. Requires 1-2” extra belt length.

9005 - Belt Buddy™

Great addition to your tool belt for extra lower back support. Will fit under a third bag or hammer holder! Very comfortable and supportive.

5035 - H.D. 3” Ranger Work BeltA quality ranger style 3” work belt. Equipped with a 2” wide heavy leather tongue and a nickel plated steel roller buckle. Constructed entirely of the highest quality 12-14 oz. bridle leather to provide support and comfort. Edge stitched for quality, appearance and strength.Available in sizes SM - XXXL

8003 - 3” Leather & Nylon Tool Belt (SM - XXL)

Padded Industrial nylon belt with a heavy 2” leather tongue and nickel plated steel roller buckle.

5005 - Belt Liner with Sheepskin (SM - XL)

The ¾”+ thick sheepskin pads provide maximum comfort. Adjustable straps secure tool belts up to 3” wide. Requires only 1-2” extra belt length.

5002 - 2” Leather Work Belt (SM - XXL)

Extra heavy duty work belt constructed of Bridle Leather custom tanned to our specifications in the USA.

Pant General Rule: Belt is 2” over actual pant size. Example Pant Belt Sizing: Pant size 34” = Belt size 36”

NEW!

16


hammer & tOOl hOlderS

Hammer & Tape Holders

Hammer holders feature steel hardware securely attached to premium belting leather.Leather tape holders form to your tape over time ensuring custom fit.

Utility Tool HoldersTool holsters are a great way to customize your belt to work with the tools you use most often. Leather forms to your tool giving it a custom fit.

Utility Dees & SnapAdd extra tool organization to your belt by positioning your most frequently used tools within easy reach with these loops.

5031 5010 5026

5031 - Leather Utility Dee Secure spring snap tools supplied on items such as telephone butt-sets, testers, etc.5010 - Leather Utility Snap Safety release snap is great for saw keys or wrench.5026 - Utility Rectangular Loop Quickly clip on tape measures, meter cases, bags.

5059 - High Mount Hammer Holder

Made of our highest quality Belting Leather. Fits up to a 3” wide belt.

5046 - Clip-On Tape Holster

Holds up to a 30’ tape. Features extra wide clip and quality leather.

5545 - Leather Nail Strip Holster

Belt worn holster accepts nail strips up to 16D. Holds up to 8 racks.

5032 - Tapered Tool Holster

Good for Bull Pin or belt worn nail bar holster. (w h): 1¾” x 6½”

5028 - Single Snip Holder

Works with Wiss® snips or as a hammer holder. (w h): 2¾” x 5½”

5025 - Plier & Tool Holster

For pliers, side cutters & 10-24 oz. plumb bob. (w h): 2½” x 5”

5014 - Universal Holster

Open bottom holster holds what you need. (w h): 2¼” x 6”

5013 - Shear Holster

Designed for most pliers and side cutters. (w h): 2¾” x 5½”

8505 - Clip-On 4 Pocket Tool Holder

Keeps your most commonly used tools right at your fingertips.

5137 - Large Tape Holster

Belt worn, high mount Large Tape Holster designed to fit the 35’ FatMax® tape w/o clip.

5047 - Tape & Knife Holder

Compact combination keeps utility knife, 2 pencils, and tape.

5037 - High Mount Tape Holder

Quality leather high mount tape pocket holds up to a 35’ tape w/o clip.

5012 - Hammer Holder

The steel hardware is sandwiched between 2 layers of premium leather for comfort and service.

5040 - Clip-On Hammer Holder

Allows quick on and off installation. Heavy duty clip fits up to a 2” belt.

5020 - 2-in-1 Tool & Hammer Holster

Twice the tool capacity of other hammer holders. Fits up to a 3” wide belt.

NEW! NEW! NEW!

17


tOOl hOlSterS

Pocket Caddy™Compact tool organizers which fit in your pocket protecting you, your tools, and your clothes. Ideal for small repair work, shop workers, gardeners, farm repair, and cabinetmakers. Create an instant mini tool carrier, organizing pliers, screwdrivers, and other tools while keeping them within easy reach. Handy snap loop hooks around belt, if desired.

Gizmo HolstersBeautifully handcrafted leather and fully lined! These high quality holsters are finished with an Italian plunge clasp for securing your valuable cell phone, iPod® or Blackberry®.

Utility CasesSecure, all leather carrying cases your safety glasses, calculators, etc. Safety Glasses Case features marine grade twist closure. Calculator cases are available in belt worn or clip-on and feature snap clip.

8570 - Leather Phone HolsterExpandable clip-on, leather phone holster fits almost all cell phones and electronic gadgets. A serious holster with heavy duty elastic sides.

8535(clip-on)

8537(clip-on)

5022

325

2003

13551355 - KitBags™

Use five different color pouches to instantly separate, categorize and organize your small tools, parts, fasteners, etc. Just grab-n-go. Made of industrial nylon. 12” x 7”

5022 - Occidental Leather® Knee PadsComfortable top-grain leather knee pads for professionals. Won’t scuff floors and are great for interior and remodeling work.

2003 - Oxy™ Tool ShieldA cost effective, STURDY shield to protect your tools, bags and body. Accepts many tools: chisel, knife, diagonal cutter, etc. Clips onto most bags or pant pockets.

325 - Oxy™ Driver Bit WalletSupple, compact personal case, organizes 6 driver bits, folds and snaps securely; attaches to bags or belt with “D” ring for secure storage!

5057Pocket Caddy™

5053Electrician’s Caddy

5503Belt Worn

Safety Glasses Case 2” x 5½” x 1½”

Calculator Cases 3½” x 5½” x 1¼”

5068/6568Belt Worn/ Clip-On

B5068/B6568Belt Worn/ Clip-On

8532/8534Belt Worn/ Clip-On

3” x 4¾” x 1”

2” x 4” x ¾”

1537Compact Design

B5057Black Leather

NEW!

NEW!

NEW!

NEW!

18


tOOl tOteS & carry BaGS

9045 - 5-in-1 Carry AllA complete kit for repairs or general construction! An organizational dream! Pouches for 5 different sized fasteners plus leather holders for driver tips and nail sets. Carry this loaded and be ready for any job!

8”L x 5”W x 6”H

9575 - Stronghold® Carpenter’s ToteCarpenter’s Tote with rugged handmade leather handle, 38 specific holders for all commonly used tools. Includes a handy zipper pouch for misc. small items, cell phone and valuables. Added plus! Comes stock with one 2003 Oxy Tool Shield™for your sharpest tool. 18”L x 11”W x 8”H

9050 - Oxy™ Framing Nail Gun CasePadded gun bags with a double wall of nylon to protect and secure the valuable investment you have in your nail gun!Leather corner protectors and a beautifully embossed heirloom logo patch. Outfitted with a large zippered bag on the interior for accessories!

19


5585 - Stronghold® Journeyman’s ToteAn industrial work of art complemented by a rugged leather luggage handle for carrying comfort. Upright design keeps tools standing for easy identification and access. 44 holders and compartments.11”L x 8½”W x 8½”H

tOOl tOteS & carry BaGS

B6510

6510

6512

B6512

Oxy™ Machinist BagsLegendary design and reliability. Sustainable all leather carry cases for the collection of specific tools for your craft be it machinist, HVAC specialist, for specialized meters and instruments, finish carpenter, wood worker. These timeless handcrafted all leather gems provide heirloom quality and timeless value. Available in Black or Ox Blood.

6510 - Machinist’s Small Tool Bag 12”L x 7”W x 6”H

6512 - Machinist’s Tool Bag 12”L x 7”W x 8½”H

3500 - Deluxe Mason’s BagThe 24 oz canvas body sits on top of the domestically tanned, storm resistant, full grain leather bottom. Two exterior side pockets for the fast grab and an interior 6” by 12” zipper pouch for small items you need locked down. A marine grade Common Sense fastener ensures the 3500 will remain closed even when thrown around.

19”L x 12”W x 9”H

NEW!

NEW!

NEW!

20


3520 - Canvas BriefClassic rugged style in both Cafe or Sand.

3522 - Canvas Sport BagRetro style for small gear. Cafe or Sand.

3524 - Men’s Shoulder BagUnique canvas bag with padded bottom and full flap.

3525 - Dispatch BagCanvas and leather bag keeps you organized. Cafe or Sand.

2526 - Carry-On DuffelCarries everything needed for life’s little adventures.

3527 - Vertical MessengerA standout canvas bag in rich Cafe color.

3528 - Laptop MessengerFor everything you need when on the go & when you get there.

3530 - Small Shoulder BagCompact organization. Available in Cafe or Sand.

3536 - Weekender BagRugged travel bag at home in the truck, trunk, or airplane.

3538 - IronMouth™ BriefRugged business case for use in office or field.

Casually styled functional designs in a marriage of canvas and leather. Tough, custom milled and dyed, 24-oz. organic cotton canvas combined with Harness leather elements ensure a lifetime of durability.

Our life is full of uncertainties and challenges: The definition of Adventure. Stronghold® Adventure Bags honor the craftsmanship and sound designs of past generations.

Rugged, reliable bags that will travel with you on any adventure, from the urban landscape to the wilderness of the outback.

adVenture SerieS™ BaGS

35203522

3524 3525

3526

3527

3528

3530

3536

3538

Width Height Depth

3520 16” 11½” 4”3522 15” 10” 7”3524 10” 12” 5”3525 15” 12” 6”3526 21” 12” 11”3527 11” 13” 4”3528 18” 14’ 3½”3530 10” 11’ 3½”3536 19” 15’ 8”3538 19” 12½” 6”

NEW!

21


6006 - Carpenter PencilsTake advantage of our low cost pencil program and get your company name and logo on one side. Available by the box (72 to a box).

5058 - Oxy-T™A quality 100% Cotton, natural T-shirt with our famous Oxy™ red logo front and center, anniversary logo, right sleeve. (M to XXL)

7016 - Log CarrierNow you can have a the quality of Occidental in your home year round with this turn of the century log carrier. High quality cotton duct canvas, secured with nylon straps.

5096 - Oxy™ CapA cap that compliments the quality of Occidental. Solid six panel hunter green cotton duck with natural leather bill. Custom woven Ox Logo tops it off.

5097 - Oxy™ Pocket Note PadThe perfect organizational tool! A vertical spiral pocket note pad that fits in all our vest systems and every shirt pocket you own.

6025 - Oxy™ CoastersBeautiful finished coasters with our Musk Ox Stronghold® brand. Set of four, perfect for the Occidental aficionado and rugged enough for several generations of daily use.

6010 - Oxy Mug™Have your morning coffee in Style!

Oxy™ GiFtS

B317 & 317

309 & B309 315 & B315

B310 & G310 & R310

5058

7016

60106025

6006

5096

5097

Oxy™ Checkbook Covers & Wallets

Hand crafted from our premium tool bag leathers and designed to last a lifetime. Heritage quality leather improves with age!Oxy™ Checkbook Covers - In Black (B310), Green (G310), or Red Leather (R310).Oxy™ Card Case - In Black (B317) or Green Leather (317).Oxy™ Card Wallet - In Black (B309) or Green Leather (309).Oxy™ Wallet - In Black (B315) or Green Leather (315).

NEW!

NEW!

NEW!

Integrity is the foundation of our business. Our respect for our employees, our dealerships, our customers and our suppliers has always been foremost in our minds as we conduct our business daily and it shows in our products.

What is the Occidental Difference? Occidental has set the industry standard in design excellence and field function without compromise for over 30 years. Occidental’s designs promote intuitive “hand specific” tool holder organization designed to improve your working rhythm on the job. We use the highest quality American made materials available. Our artisans hand craft each product.

Made in USA • Printed in USA • ©2010 Occidental Manufacturing Inc.

1167

-011

0

Phone: 707-824-2560 Fax: 707-824-2570 e-mail: [email protected]

Please visit our website for information on our complete line.

w w w . b e s t b e l t . c o m

All products are Designed and Manufactured in Sonoma

County, California Since 1980!

Trust • Heritage • Value

Well Made in the USA!

occidental leather 2010...8580 - fatlip tool bag set signature design for production carpenters....

Documents