observation landing gear par1
TRANSCRIPT
-
8/7/2019 Observation landing gear par1
1/2
Observation landing gear part-1Introduction
2/8 to 7/8 should be deleted1/13 original picture to be insert2/13 extended should be written instead of extracted5/13 original antiskid control box should be shown and written6/13 arrows repositioned8/13 antiskid switch should be shown with arrow11/13 original picture to be inserted especially pin removing and installing s should beshown12/13 original picture to be inserted
MLG2/15 retraction and extension should be written5/15 up lock unit assy original picture to be shown9/15 original micro switches should be shown11/15 original picture to be paste.12/15 lock up unit original picture to be paste.13/15 main wheel should be more visible13/15 nose wheel door should filly closed15/15 insert new picture
NLG1/13 nose wheel wrong2/13 same as 1/134/13 some time gap should be between landing and take-off
8/13 extension should be written instead of extraction ( in every slide )9/13 by two doors on each side to be written instead of double doors13/13 ribbed doors to be written instead of Rribbed
Extension and retractionIn slide spelling should be correct1/9 same as 8/133/9 original picture to be insert5/9 and nose landing gear extended instead of extract to be written6/9 during extension, extended should be written instead of extraction7/9 writing missing
9/9 extend to be written instead of extractRetraction
1/7 when landing gear lever should be written
Extension3/8 to extend to be written instead of extract5/8 extraction is wrong2/8 handle should show like 3/8
-
8/7/2019 Observation landing gear par1
2/2
4/8 plunger should be shown by arrow
Landing gear micro switches1/3 original picture to be paste3/3 insert 1 extra slide which shows picture on which up lock and down lock microswitches are shown (tax from dash 1 page no. 1-7-5 take 1 st 3 lines of micro switches)
Indication and warning1/8 flaps indicators not visible
Note: - Quiz not available summary andglossary to be checked for correct spelling.
There are many mistakes.