obm880211 ma5600t voip service configuration exercise guide(h.248) issue 1.00

Revision RecordCourse Code Product Product

VersionCourse Version

ISSUEOBM880211 MA5600T V8R8 ISSUE1.0

Developer/Modifier

Time Approver New/Update

xufei 2010-11 zhangjun New

MA5600T VOIP Service Configuration Exercise Guide

ISSUE 1.0

MA5600T VOIP Service Configuration Exercise GuideISSUE 1.0 Table of Contents

Table of ContentsChapter 1 Lab Networking Description.........................................................................................1Chapter 2 MA5600T VOIP Service Configuration.........................................................................2

2.1 Objective............................................................................................................................. 22.2 Task.................................................................................................................................... 22.3 POTS VOIP Service Networking.........................................................................................22.4 VOIP Service Configuration Flow........................................................................................32.5 VOIP Service Configuration Step........................................................................................32.6 VOIP Service Configuration................................................................................................3

2.6.1 H.248 protocol MG interface configuration...............................................................32.6.2 MGCP protocol MG interface configuration..............................................................6

Confidential Information of Huawei. No Spreading without Permission i

MA5600T VOIP Service Configuration Exercise GuideISSUE 1.0

Chapter 2 MA5600T VOIP Service Configuration

Chapter 1 Lab Networking Description

Lab Network Layout

MA5600-1PVM:192.168.50.12

MA5600-2PVM:192.168.50.22

MA5600-3PVM:192.168.50.32

I II III

192.168.50.13

192.168.50.16192.168.50.15

192.168.50.14 192.168.50.23

192.168.50.26192.168.50.25

192.168.50.24 192.168.50.33

192.168.50.36192.168.50.35

192.168.50.34

192.168.50.37192.168.50.250

I II III

LAN Switch

192.168.50.254

NMS Server Multicast ServerNMS Server

Lab Network Layout

MA5600-1PVM:192.168.50.12

MA5600-2PVM:192.168.50.22

MA5600-3PVM:192.168.50.32

I II III

192.168.50.13

192.168.50.16192.168.50.15

192.168.50.14 192.168.50.23

192.168.50.26192.168.50.25

192.168.50.24 192.168.50.33

192.168.50.36192.168.50.35

192.168.50.34

192.168.50.37192.168.50.250

I II III

LAN Switch

192.168.50.254

NMS Server Multicast ServerNMS Server

Confidential Information of Huawei. No Spreading without Permission 1




2.1 Objective1) Be familiar with POTS VOIP service of MA5600T2) Describe the working theory of the POTS VOIP service3) Be skilled at operation of the POTS VOIP service provisioning4) Obtain the ability for maintenance and provisioning of POTS VOIP service.

2.2 Task1. MG Interface Configuration

H.248 protocol MGCP protocol

2. VoIP Service Configuration

2.3 POTS VOIP Service Networking

Confidential Information of Huawei. No Spreading without Permission2



2.4 VOIP Service Configuration Flow

STARTSTARTSTARTSTART

Configure the electric switchConfigure the electric switch

Configure the upstream port for VOIP


Configure VOIP address poolConfigure VOIP address pool

MG Interface configuration

Add MG interfaceAdd MG interface

MG interface dataconfiguration


Enable MG interfaceEnable MG interface

Configure the electric switchConfigure the electric switch



Configure VOIP address poolConfigure VOIP address pool

MG Interface configuration

Add MG interfaceAdd MG interface



Enable MG interfaceEnable MG interface

POTS subscriber dataconfiguration

Software parameterconfiguration

Protocol dataconfiguration

H.248 stack parameters(Optional)


POTS Customer basic

dataconfiguration

POTS Customer basic

dataconfiguration

POTS customer common attributes(Optional)


MG interface software

parameters(Optional)



System parameters(Optional)


SPC configuration(Optional)


POTS subscriber dataconfiguration

Software parameterconfiguration

Protocol dataconfiguration



POTS Customer basic

dataconfiguration

POTS Customer basic

dataconfiguration











ENDENDENDEND

2.5 VOIP Service Configuration StepStep1 Configure the upstream port for VOIP. Step2 Configure VOIP address pool. Step3 Add MG interface Step4 MG interface attribute configurationStep5 Enable MG interface Step6 POTS subscriber user data configuration.

2.6 MG Interface Configuration2.6.1 H.248 protocol MG interface configuration

1. Data plan

Data Type Item Data MG interface data

mgid 0

code text

protocol UDP

port number MG: 2944 MGC: 2944

Terminal ID 0---31

IP addresses and

MG interface 17.248.41.1/8

Default gateway 17.0.0.1/8


DSLAM Line Test Exercise GuideISSUE 1.0


subnet masks MGC 200.200.200.200

Telephone numbers

Phone 1–Phone 32 Shelf/Slot: 0/11 Telephone numbers: 40100100–40100131

VLAN vlan_tag 172

2. procedure

Step 1 Configure vlan and uplink .huawei(config)#vlan 172 standardhuawei(config)#port vlan 172 0/9 0Step 2 Configure the upstream VLAN interface for the media stream and the signaling flow.huawei(config)#interface vlanif 172huawei(config-if-vlanif172)#ip address 17.248.41.1 8

Step 3 Configure the static route from the MG to the MGC.huawei(config)#ip route-static 200.200.200.200 24 17.0.0.1Step 4 Configure the address pools for the media stream and the signaling flow.huawei(config)#voiphuawei(config-voip)#ip address media 17.248.41.1 17.0.0.1huawei(config-voip)#ip address signaling 17.248.41.1Step 5 Add an MG interface.huawei(config)#interface h248 0Are you sure to add MG interface? (y/n)[n]:yStep 6 Configure the MG interface attributes.huawei(config-if-h248-0)#if-h248 attribute mgip 17.248.41.1 mgport 2944 code texttransfer udp primary-mgc-ip1 200.200.200.200 primary-mgc-port 2944 mg-media-ip1 17.248.41.1huawei(config-if-h248-0)#display if-h248 attribute-----------------------------------------------------------MGID 0MG Description -MG DomainName -Protocol H248Top H248 Version 3Profile -2833Encrypt -Codetype TextTransmode UDPHeartBeatGenTimer(s) 60HeartBeatRetransTimes 3HeartBeatRetransTimer(s) 60MG signaling IP 17.248.41.1MG signaling Port 2944MG media IP 17.248.41.1MIDType IP4_ADDRDeviceName -Active MGC MGC Port :2944 MGC IP:200.200.200.200Active MGC MGC Domain Name:-Standby MGC MGC Port :- MGC IP:-Standby MGC MGC Domain Name:------------------------------------------------------------




Step 7 Enable the MG Interface.huawei(config-if-h248-0)#reset coldstartAre you sure to reset MG interface?(y/n)[n]:y

3. Result

The MG interface interconnects with the MGC successfully and the MG interface is in the normal state.huawei(config-if-h248-0)#quithuawei(config)#display if-h248 all-------------------------------------------------------------------------MGID TransMode State MGPort MGIP/DomainName MGCPort MGCIP/DomainName-------------------------------------------------------------------------0 UDP Normal 2944 17.248.41.1 2944 200.200.200.200

4. Configure the VoIP userhuawei(config)#board confirm 0/2huawei(config)#esl userhuawei(config-esl-user)#mgpstnuser batadd 0/11/0 0/11/31 0 terminalid 0 telno 40100100huawei(config-esl-user)#display mgpstnuser 0 0 32 ------------------------------------------------------------------------ F /S /P MGID TelNo Priority PotsLineType TerminalID ------------------------------------------------------------------------ 0 /2 /0 0 40100100 Cat3 DEL A0 0 /2 /1 0 40100101 Cat3 DEL A1 ...... 0 /2 /30 0 40100130 Cat3 DEL A30 0 /2 /31 0 40100131 Cat3 DEL A31 ------------------------------------------------------------------------

2.6.2 MGCP protocol MG interface configuration

1. Data plan

Data Type Item Data MG interface data

mgid 0

code text

protocol UDP

port number MG: 2727 MGC: 2727

Terminal ID 0---31

IP addresses and subnet masks

MG interface 17.248.41.1/8

Default gateway 17.0.0.1/8

MGC 200.200.200.200

Telephone numbers

Phone 1–Phone 32 Shelf/Slot: 0/11 Telephone numbers: 40100100–40100131

VLAN vlan_tag 172


DSLAM Line Test Exercise GuideISSUE 1.0


2. Procedure

Step 1 Configure vlan and uplink .huawei(config)#vlan 172 standardhuawei(config)#port vlan 172 0/9 0Step 2 Configure the upstream VLAN interface for the media stream and the signaling flow.huawei(config)#interface vlanif 172huawei(config-if-vlanif2)#ip address 17.248.41.1 8huawei(config-if-vlanif2)#quit

Step 3 Configure the address pools for the media stream and the signaling flow.huawei(config)#voiphuawei(config-voip)#ip address media 17.248.41.1 17.0.0.1huawei(config-voip)#ip address signaling 17.248.41.1Step 4 Configure the supported MG control protocol as MGCP.huawei(config)#protocol support mgcphuawei(config)#savehuawei(config)#reboot system

Step 5 Add an MG interface.huawei(config)#interface mgcp 0Are you sure to add MG interface? (y/n)[n]:yStep 6 Configure the MG interface attributes.huawei(config-if-mgcp-0)#if-mgcp attribute mgip 17.248.41.1 primary-mgc-ip1 200.200.200.200 mgport 2727 primary-mgc-port 2727 domainName MA5600T.comhuawei(config-if-mgcp-0)#display if-mgcp attribute------------------------------------------------------MGID 0MG description -MG DomainName MA5600T.comProtocol MGCP2833Encrypt -Codetype TextTransmode UDPIP 17.248.41.1Port 2727HeartBeat Timer(s) 60MGC[1] MGC PORT :2727 MGC IP:200.200.200.200MGC[1] MGC Domain Name:-MGC[2] MGC PORT :- MGC IP:-MGC[2] MGC Domain Name:-MGC[3] MGC PORT :- MGC IP:-MGC[3] MGC Domain Name:--------------------------------------------------------Step 7 Enable the MG Interface.huawei(config-if-mgcp-0)#resetAre you sure to reset MG interface?(y/n)[n]:y

3. Result

The MG interface interconnects with the MGC successfully and the MG interface is in the normal state.huawei(config-if-mgcp-0)#quithuawei(config)#display if-mgcp all---------------------------------------------------------------------MGID State MGPort MGIP/DomainName MGCPort MGCIP/DomainName---------------------------------------------------------------------




0 Normal 2727 17.248.41.1 2727 200.200.200.200---------------------------------------------------------------------

4. Configure the VoIP userhuawei(config)#board confirm 0/2huawei(config)#esl userhuawei(config-esl-user)#mgpstnuser batadd 0/11/0 0/11/31 0 terminalid 0 telno 40100100huawei(config-esl-user)#display mgpstnuser 0 0 32 ------------------------------------------------------------------------ F /S /P MGID TelNo Priority PotsLineType TerminalID ------------------------------------------------------------------------ 0 /2 /0 0 40100100 Cat3 DEL A0 0 /2 /1 0 40100101 Cat3 DEL A1 ...... 0 /2 /30 0 40100130 Cat3 DEL A30 0 /2 /31 0 40100131 Cat3 DEL A31 ------------------------------------------------------------------------


obm880211 ma5600t voip service configuration exercise guide(h.248) issue 1.00

Documents