object-oriented multi-indenture multi-echelon spare parts … · various echelons (levels) in a...
TRANSCRIPT
![Page 1: OBJECT-ORIENTED MULTI-INDENTURE MULTI-ECHELON SPARE PARTS … · various echelons (levels) in a multi-echelon supply chain network. Spare parts supply chain management deals with](https://reader031.vdocuments.us/reader031/viewer/2022011900/5f0399587e708231d409d8b2/html5/thumbnails/1.jpg)
1
OBJECT-ORIENTED MULTI-INDENTURE MULTI-ECHELON SPARE PARTS
SUPPLY CHAIN SIMULATION MODEL.
Manuel D. Rossetti and Soncy Thomas
![Page 2: OBJECT-ORIENTED MULTI-INDENTURE MULTI-ECHELON SPARE PARTS … · various echelons (levels) in a multi-echelon supply chain network. Spare parts supply chain management deals with](https://reader031.vdocuments.us/reader031/viewer/2022011900/5f0399587e708231d409d8b2/html5/thumbnails/2.jpg)
2
Abstract
In supply chain networks, the flow of material occurs between various business entities
such as suppliers, manufactures, distributors and retailers, which can be considered as the
various echelons (levels) in a multi-echelon supply chain network. Spare parts supply
chain management deals with optimizing stocking, purchasing, repairing and disposing
activities of purchased parts and their components for maintaining a successful user
service level for a system involving repair and operating functions. A spare parts
inventory system has products which will have relationships with other products. A
multi-indenture structure defines the structure of the products that flow through the
supply chain system. In this article, we present a standardized, object-oriented, data-
driven, simulation framework for the evaluation of multi-echelon multi-indenture spare
part supply chain networks.
Key Words
Spare parts, inventory, object-oriented simulation, multi-indenture,
multi-echelon, supply chain.
1. Introduction
A spare parts supply chain system can be considered as a network of facilities and
distribution options that operate to obtain raw materials, transform these materials to
finished products, distribute these finished products to the customers depending upon
![Page 3: OBJECT-ORIENTED MULTI-INDENTURE MULTI-ECHELON SPARE PARTS … · various echelons (levels) in a multi-echelon supply chain network. Spare parts supply chain management deals with](https://reader031.vdocuments.us/reader031/viewer/2022011900/5f0399587e708231d409d8b2/html5/thumbnails/3.jpg)
3
their demand, and repair the failed products. The importance of spare parts supply chain
management has increased in the past decades to reduce the down time of critical
equipment such as computer equipment, medical equipment, and military equipment.
Fast and effective supply of spare parts is required for effective corrective maintenance
which leads to the need of spare parts supply chain management [1]. In this research our
goal is to analyze and identify the fundamental elements necessary for modeling generic
spare parts supply chain scenarios via simulation. We provide an object-oriented, generic
simulation framework for multi-indenture, multi-echelon (MIME) spare parts supply
chain networks. The Unified Modeling Language (UML), which has emerged as a
standard for object-oriented modeling, has been used for depicting the design details of
the framework. This framework presents a reusable design of a supply chain network by
representing the various behaviors of the supply chain entities as a set of abstract classes
which allow the user to plug in different behaviors without altering the structure of the
framework. The framework can be used for the evaluation of new or existing supply
chains, testing of analytical optimization algorithms, and embedding in optimization
algorithms. In the following, we briefly review literature in the area of spare parts
inventory management to motivate our work and as a basis for the testing of the
framework discussed later in this paper.
The Multi Echelon Technique for Recoverable Item Control (METRIC) theory
has formed the basis for theoretical results in supply chains that involve repairable items.
In the METRIC theory, the objective function is to minimize the expected number of
back orders. The METRIC theory calculates the optimal stock level at different bases
(echelons) in a multi-echelon system for every first indenture item in the system [2], [3].
![Page 4: OBJECT-ORIENTED MULTI-INDENTURE MULTI-ECHELON SPARE PARTS … · various echelons (levels) in a multi-echelon supply chain network. Spare parts supply chain management deals with](https://reader031.vdocuments.us/reader031/viewer/2022011900/5f0399587e708231d409d8b2/html5/thumbnails/4.jpg)
4
METRIC theory assumes that the units under repair depend on the total number of units
in service, the repair rate, and the delay for obtaining the spares [4].
The multi-indenture problem can be modeled accurately by taking into account
the dependencies between the indentures using VARI-METRIC theory [2]. This resulted
in a ten-fold improvement over the standard METRIC results [2], [3]. In the VARI-
METRIC technique, the calculation of the expected number of back orders is done by
taking into account not only the mean pipeline values but the variance as well. The
VARI-METRIC technique assumes a Poisson demand with a constant mean. The VARI-
METRIC technique also assumes that all units can be repaired and that there exists no
lateral supply [3]. In VARI-METRIC theory, a product failure is caused by at most one
subcomponent failure and all products are considered equally critical.
IBM has developed an optimizer for flexible and optimal control of service levels
and spare parts inventory. The optimizer helped in reducing the inventory investment and
operating cost and improving the service levels for IBM [5]. The objective of the
optimizer was to determine the stock control policy for each location and for each part
that would minimize the expected costs for the whole system. The cost function included
replenishment cost (which includes transportation, handling and order setup costs),
emergency cost, and inventory holding cost [5].
The previously mentioned methods, utilize analytical modeling techniques based
on stochastic inventory theory. These techniques are limited in their ability to fully
describe real spare part networks. Among the various alternative methodologies that are
available, simulation is highly recommended for analyzing complex systems [6]. Dong
[7] considered simulation as a better technology for designing supply chain systems due
![Page 5: OBJECT-ORIENTED MULTI-INDENTURE MULTI-ECHELON SPARE PARTS … · various echelons (levels) in a multi-echelon supply chain network. Spare parts supply chain management deals with](https://reader031.vdocuments.us/reader031/viewer/2022011900/5f0399587e708231d409d8b2/html5/thumbnails/5.jpg)
5
to the system variation and interdependencies. In a supply chain network, since the
demand forecast is the most important variable that affects the movement of material in
the network and demand forecast is susceptible to a large amount of variation, simulation
is one of the best methods to analyze the network when the key driver is variance [8].
Ingalls [8] also suggested that simulation is the best tool for evaluating rule-based
systems in which the customers or certain groups of customers have priority in selecting
the products.
Among the major problems for using simulation for complex supply chain
analysis is that most of the simulation models are specific to a particular problem and
have a limited use [9]. The two major problems that are associated with simulation
models are 1) they take a long time to develop and 2) they are very specific and have
limited reuse [10]. In order to address the reusability of the simulation models, Rossetti
and Chan [9] developed the Supply Chain Simulation Framework (SCSF), which
facilitates the dynamic analysis of multi-echelon supply chain systems. We enhance and
build upon their work for modeling the multi-echelon aspects of the spare parts supply
chain simulation model.
2. Spare Pats Supply Chain Simulation Framework Development
The product structure of failed products and the subcomponents has to be accounted for
when analyzing the repairable products network. In a MIME system, a product may
consist of critical and non-critical subcomponents. The working condition of all the
critical subcomponents in a multi-indentured product together with the functioning of the
![Page 6: OBJECT-ORIENTED MULTI-INDENTURE MULTI-ECHELON SPARE PARTS … · various echelons (levels) in a multi-echelon supply chain network. Spare parts supply chain management deals with](https://reader031.vdocuments.us/reader031/viewer/2022011900/5f0399587e708231d409d8b2/html5/thumbnails/6.jpg)
6
end product simultaneously determines the availability of the end product. For example,
airplanes in a military weapon system or copiers in a commercial supply chain system
depend on the operational capabilities of the critical and non-critical subcomponents. The
failure of non-critical subcomponents in a product will make the product partially mission
capable (PMC) and the failure of critical subcomponents will make the product failed due
to subcomponents. In addition, a component in the MIME system has a chance of failing
independently of any of the product’s subcomponents status.
A series of events occur when an end item arrives at a facility (the product’s
primary operating base) after its operational cycle, starting with the diagnosis of the
operational capability of the end item and its subcomponents. The products that are
failed, either independently of subcomponents or because of the failed subcomponents,
create demand for spare parts. A list of demands constitutes an order. The order is placed
at the primary facility for repair or replacement. The facility tries to repair the failed
products. The failed products that are not repairable at the local facility are sent to
another facility for repair. A warehouse, which supports the facility, will try to satisfy the
demand that was created due to the failed product with its stocked inventory. If the
warehouse is out of stock, the demand is backordered until a new product becomes
available. Replenishment for the warehouse can come from either the local repair station
or from another echelon. A diagrammatic representation of a single echelon multi-
indentured product is shown in Fig. 1. Fig. 2 shows a diagrammatic representation of a
multi-echelon system. The bases in the Fig. 2 can be considered as the first echelon, the
depots as the second echelon and the contractor as the third echelon. The demand for the
failed products will occur at a base from the end items that are associated with that base.
![Page 7: OBJECT-ORIENTED MULTI-INDENTURE MULTI-ECHELON SPARE PARTS … · various echelons (levels) in a multi-echelon supply chain network. Spare parts supply chain management deals with](https://reader031.vdocuments.us/reader031/viewer/2022011900/5f0399587e708231d409d8b2/html5/thumbnails/7.jpg)
7
The failed products that cannot be repaired at the base facility will generate demands for
the depot and the failed products that cannot be repaired at the depot generate demands
for the contractor. The flow of demands and replenishments that occur in the system are
also illustrated in Fig. 2.
Figure 1 A single echelon system
Figure 2 Multi-echelon system
A detailed analysis of the MIME system is possible by analyzing the multi-indenture
architecture and the multi-echelon architecture. The multi-indenture architecture depends
on the relationships that exist between a product and its subcomponents. The bill of
![Page 8: OBJECT-ORIENTED MULTI-INDENTURE MULTI-ECHELON SPARE PARTS … · various echelons (levels) in a multi-echelon supply chain network. Spare parts supply chain management deals with](https://reader031.vdocuments.us/reader031/viewer/2022011900/5f0399587e708231d409d8b2/html5/thumbnails/8.jpg)
8
materials (BOM) can be considered as a data structure that stores the relationship
between the end items and the lower-level items [11], [12]. In supply chain networks
where the customers are given a high degree of freedom for their product specification,
the design and maintenance of BOM structures for these products are difficult [13]. In
this research, we use a database to hold the BOM structures for modeling the MIME
spare parts supply chain system. This will help users change the simulation model
according to their requirements.
Each product in the MIME system has an operation time (run time), which is the
random amount of time the product will work when the product is assigned to do an
operation. The failure time of a product can be defined as the random amount of time the
product works before it fails. In other words, if the operation time of a product exceeds
the failure time associated with the product, failure will occur. In our framework, the end
item or the product that does not have a parent is assumed to operate for a random or
scheduled amount of time. All the children of this main product will assume the same
operating time as that of the operation time of the parent product. The failure of a product
or the failure of the subcomponents associated with the product defines the different state
changes associated with the product.
The working state is defined as the state of the product while the product is
operating. As illustrated in Fig. 3, a product can reach the working state only when the
product is in the available state or in PMC state, in other words, a product can work only
when is completely functional or partially functional (some non-critical components are
not operationally capable). The failed state, as explained earlier happens if the operation
time of a product exceeds the failure time associated the product, the product goes into
![Page 9: OBJECT-ORIENTED MULTI-INDENTURE MULTI-ECHELON SPARE PARTS … · various echelons (levels) in a multi-echelon supply chain network. Spare parts supply chain management deals with](https://reader031.vdocuments.us/reader031/viewer/2022011900/5f0399587e708231d409d8b2/html5/thumbnails/9.jpg)
9
the failed state. A product may reach the failed state only from the working state because
failure can occur only if the product is working.
A product is in its Partially Mission Capable (PMC) state when the product is
available for operation with one or more of the subcomponents in the failed state. The
PMC state of a product can be reached only from the working state of the product. If a
product is ready for operation with none of the subcomponents of the product in the
failed state, the product is in the available state. The available state of a product can be
reached from the PMC state, working state, and the ready to issue state. The failed due to
subcomponent state of a product occurs when the product is not available for operation
because it contains at least one failed subcomponent, which was critical for the
functioning of the product. This state can be reached only from the working state of the
product. Once a failed product is repaired by a repair station, the state of the product
becomes the repaired state. A product in the repaired state may not confirm that all the
subcomponents of the product are in a state that is ready for functioning. The product
may still have some of the subcomponents in the failed state. A product reaches the
repaired state only from the failed state, because repair is needed only when a product is
failed.
The ready to issue state of the product conveys the idea that the product is in
inventory. A product in the ready to issue state confirms that the product and all its
subcomponents are completely ready for operations and that it can be used as inventory.
A product in the failed due to subcomponent state or in the failed state can be
transformed into the ready to issue state. A product is in the initial state before a
simulation replication begins and after the simulation replication ends. This initial state is
![Page 10: OBJECT-ORIENTED MULTI-INDENTURE MULTI-ECHELON SPARE PARTS … · various echelons (levels) in a multi-echelon supply chain network. Spare parts supply chain management deals with](https://reader031.vdocuments.us/reader031/viewer/2022011900/5f0399587e708231d409d8b2/html5/thumbnails/10.jpg)
10
useful because this state allows all products to have a common state before the beginning
of a simulation replication. From the initial state a product can change only into the ready
to issue state. The state transformation procedure of the product is illustrated in Fig. 3.
Figure 3 State change pattern
This framework allows the higher indentured products to work without having the failed
subcomponents contained in the product, when the subcomponents are taken to the
facility for repair or replenishment. The higher indentured products in the system should
be aware of the missing subcomponents in the product that were sent to a facility for
repair or replenishment. The list of these missing components will be used for re-
attaching the repaired or new subcomponents back into their respective positions.
The orders that were created because of the failure of the products in the system
are sent to a facility for repair or replenishment. Various behaviors that are associated
with a facility are assigned to the agents of the facility. The Order Receiving Agent of a
facility processes the orders that arrive at the facility from another facility and sends the
failed products to the repair station attached to the facility. The Order Sending Agent
![Page 11: OBJECT-ORIENTED MULTI-INDENTURE MULTI-ECHELON SPARE PARTS … · various echelons (levels) in a multi-echelon supply chain network. Spare parts supply chain management deals with](https://reader031.vdocuments.us/reader031/viewer/2022011900/5f0399587e708231d409d8b2/html5/thumbnails/11.jpg)
11
creates demands for failed products that a facility cannot repair at the local repair station,
and sends the created demands as an order to a different facility. The Shipment Receiving
Agent of a facility breaks down the shipments of good products received from another
facility, and sends those products to the warehouse of the facility.
The Shipment Sending Agent makes the shipment with the orders that were
satisfied at the facility and then sends the shipments to the customer facility that created
the order. The End Item Scheduling Agent schedules another operational cycle for the end
items that arrive at the facility provided the end items are operationally capable. Fig. 4
illustrates the facility and the functionality of its agents.
Figure 4 Agents of a fFacility
The agents facilitate easy behavioral changes for a facility. For example, a contractor is a
special kind of facility that receives demands for products that are not repairable at any of
the repair stations of the facilities. A contractor is distinguished from a facility by the
agents it uses.
Another major component of a facility is the Warehouse. The function of a
warehouse in a facility is to store the products that are ready for issue. The warehouse of
a facility is capable of storing any number of products and maintaining inventory
![Page 12: OBJECT-ORIENTED MULTI-INDENTURE MULTI-ECHELON SPARE PARTS … · various echelons (levels) in a multi-echelon supply chain network. Spare parts supply chain management deals with](https://reader031.vdocuments.us/reader031/viewer/2022011900/5f0399587e708231d409d8b2/html5/thumbnails/12.jpg)
12
associated with all of the products. The warehouse deals with two different kinds of
orders. External orders represent the orders that are flowing in and out of a facility and
internal orders represent orders generated at a facility’s repair station by a product
containing demands for the missing components in the product (failed removable
subcomponents that were removed for repair) that were created while disassembling the
product. Internal orders also include orders from the end item scheduling agent of the
facility for a good end item. Fig. 5 illustrates the function of a warehouse in a facility.
Figure 5 Warehouse of a facility
The Repair Station of a facility is the component which performs the repair work on
failed products that arrive at a facility. The major behaviors of a repair station are
assigned to its components so as to enhance the flexibility of the framework. The
Disassembling Unit of the repair station disassembles the failed products and the
Assembling Unit attaches the components into their respective positions within products
that were disassembled for repair. The Work Station of the repair station acts as a
resource in the repair station and repairs the failed products. The Inspection Unit of the
![Page 13: OBJECT-ORIENTED MULTI-INDENTURE MULTI-ECHELON SPARE PARTS … · various echelons (levels) in a multi-echelon supply chain network. Spare parts supply chain management deals with](https://reader031.vdocuments.us/reader031/viewer/2022011900/5f0399587e708231d409d8b2/html5/thumbnails/13.jpg)
13
repair station checks for any failed subcomponents in the product that are not repaired
locally. If the product contains any failed parts, because they cannot be repaired locally,
the product will be sent to the order sending agent of the facility where it will be sent to a
different facility for repair. The Dispatcher of the repair station makes repair jobs for the
different functional units of the repair station and then assigns the repair jobs according to
the availability of the functional units. Fig. 6 illustrates the relationship between the
repair station and its components.
Figure 6 Repair station and its components
We designed the spare parts supply chain framework by dividing the framework into 4
subcomponents which includes database, preprocessor, MIME Application, and a
postprocessor. In order to make a generic MIME supply chain simulation model, the
model receives all the data that is required to create the multi-echelon and multi-
indenture architecture from a database. In our implementation, we have decided to use
Microsoft Access as the database. The design is not dependent on the use of Microsoft
Access. Other database engines such as MySQL, Oracle, DB2 can be easily substituted as
![Page 14: OBJECT-ORIENTED MULTI-INDENTURE MULTI-ECHELON SPARE PARTS … · various echelons (levels) in a multi-echelon supply chain network. Spare parts supply chain management deals with](https://reader031.vdocuments.us/reader031/viewer/2022011900/5f0399587e708231d409d8b2/html5/thumbnails/14.jpg)
14
the database store. The database consists of 6 tables. Table 1 shows the list of tables used
in the database and their functions.
Table 1 List of Tables Used in the Database ProductType Table Stores the information necessary for making product types
necessary for a system. BOM Table Stores the parent-child relationship that exists between the products
which is the fundamental relation behind the indenture structure of a product
Facility Table Stores the data identifier of all the facilities that are required for the network and the class names of the agents which each facility needs to make.
FacilityRelationship Table Stores information required for building multi-echelon structure (customer-supplier relationship).
ProductFacilityRelationship Table Stores information that is dependent on both product type and facility such as inventory, mean repair time, repair probability etc.
RepairLocation Table Stores information of the facilities that can repair a particular product type
EndItemFacilityAssociation Table Stores the ProductTypes of the end items and the number of end items associated with each facility.
To avoid excessive database traffic within the model, we have used a preprocessor
(MIMEStructure class) to query all information required for building the system from the
database before the simulation begins. The preprocessor also has the responsibility of
obtaining the Java Database Connectivity (JDBC) which allows applications to access
SQL databases. The connection between the Java class (MIMEStructure) and MS Access
is obtained by using the JDBC - ODBC (Open Database Connectivity) Bridge. Fig. 7
illustrates the components of the MIME simulation environment. The database facilitates
restructuring of the MIME systems by altering the data input of the database. The
simulation model is constructed entirely from the database. Hence the time taken for
modeling different systems using the MIME simulation framework will entirely depend
upon the time required to collect the essential data for the system such as the product
structure, the failure time of the products, the repair time, etc.
![Page 15: OBJECT-ORIENTED MULTI-INDENTURE MULTI-ECHELON SPARE PARTS … · various echelons (levels) in a multi-echelon supply chain network. Spare parts supply chain management deals with](https://reader031.vdocuments.us/reader031/viewer/2022011900/5f0399587e708231d409d8b2/html5/thumbnails/15.jpg)
15
Figure 7 MIME system design
The application includes the design of the multi-echelon and multi-indenture
architectures. The facilities and the relationships (supplier-customer) between facilities
are created by the “MIMEStructure” class (Preprocessor). The MIMEStructure uses a
network pattern to create all the facilities in a system and its relationship with other
facilities. The general network pattern has a network class and two additional classes, one
for nodes and the other one for arcs. Fig. 8 illustrates the UML representation of the
design which we used to create a facility and its relationships with other facilities.
In Fig. 8 the MIMEStructure represents the general class in the network pattern.
The facility class represents the node and the FacilityRelationship represents the arc. A
customer can have many suppliers and a supplier can have many customers. The
FacilityRelationship contains information such as the time taken for the shipment of a
particular product type from the supplier to the customer. In the network, every
relationship between facilities can exist only when a ProductType is associated with it.
![Page 16: OBJECT-ORIENTED MULTI-INDENTURE MULTI-ECHELON SPARE PARTS … · various echelons (levels) in a multi-echelon supply chain network. Spare parts supply chain management deals with](https://reader031.vdocuments.us/reader031/viewer/2022011900/5f0399587e708231d409d8b2/html5/thumbnails/16.jpg)
16
MIMEStructure
Facility
*
FacilityRelationship
**
*
* **
*
myCustomer
mySupplier
Figure 8 Design of facility and its relationship with other facilities The facility segregates the different functions that should be performed by the facility
into the component classes which it has created for doing the specific functions. The
association between the facility and its components is an aggregation which implies that
the facility contains all its components. A diagrammatic representation for the
aggregation association of a facility and its components is illustrated in Fig. 9.
OrderReceivingAgent OrderSendingAgentWarehouse
EndItemSchedulingAgent
RepairStationShipmentReceivingAgent
Facility
1 11
1
11
ShipmentSendingAgent
11 1 1
1
111
Figure 9 Facility and its components
When a warehouse is made by a facility for storing the inventory associated with the
facility, the warehouse will make an inventory class for each product type in the system.
The relationship that exists between Warehouse and Inventory is aggregation, which
implies that all the inventory objects created are contained in Warehouse.
When a facility creates a repair station, the subcomponents of the repair station
are also created. The association between the repair station and its components is
aggregation with a link attribute which defines the number of subcomponents that should
![Page 17: OBJECT-ORIENTED MULTI-INDENTURE MULTI-ECHELON SPARE PARTS … · various echelons (levels) in a multi-echelon supply chain network. Spare parts supply chain management deals with](https://reader031.vdocuments.us/reader031/viewer/2022011900/5f0399587e708231d409d8b2/html5/thumbnails/17.jpg)
17
be created by the repair station. The aggregation association implies that the repair station
contains the subcomponents that were created. The link attributes which the repair station
uses for creating the subcomponents are derived from the Facility depending upon the
type of subcomponents to be created. The UML representation of the relationship that
exists between the repair station and its subcomponents is illustrated in Fig. 10
WorkStationDispatcher InspectionUnit
AssemblingUnit
RepairStation
11 1
1
DisassemblingUnit
1
1 1 1
1 1
Figure 10 Repair station and its components
In order to build the multi-indenture architecture, a network pattern was again used for
creating the products. The class, MIMEStructure represents the network class;
ProductType and ProductRelationship are the classes that represent the nodes and the
arcs respectively. ProductType represents the different types of products that are present
in the system and ProductRelationship represents the relationship that exists between the
products.
A product type can have many product relationships in which it can act as parent
to other product types or a child to several product types. But a product relationship has
only one parent and only one child contained in it. This represents two, one-to-many,
relationships. Aggregation is used to represent the relationship between the
MIMEStructure and its components because it contains the ProductType and the
ProductRelationship classes. The above representation is shown in Fig. 11.
![Page 18: OBJECT-ORIENTED MULTI-INDENTURE MULTI-ECHELON SPARE PARTS … · various echelons (levels) in a multi-echelon supply chain network. Spare parts supply chain management deals with](https://reader031.vdocuments.us/reader031/viewer/2022011900/5f0399587e708231d409d8b2/html5/thumbnails/18.jpg)
18
MIMEStructure
Product
*
ProductRelationship
*
*
** *
*
*
myParent
myChild
Figure 11 Design of multi-indenture architecture
The post processor of the simulation model simulates and gives the output of the
simulation. The Java Simulation Library (JSL) package is a simulation resource library,
which we utilized to simulate the MIME, supply chain system [9]. In this system, all the
supply chain elements are connected to the JSL, which is described in reference [14]. We
have designed the network in such a way that all the supply chain elements such as the
facility, warehouse, repair station, order, etc. are derived from a JSL class called
ModelElement which allows our model to access the functionalities of the JSL such as
scheduling events, access of random number generators etc. The events scheduled by the
subclasses of the ModelElement advance the simulation clock associated with the JSl.
The JSL writes the output of the simulation to a database.
As discussed above the MIMEStructure class (Preprocessor) deals with the data
interaction that is only done prior to the system simulation. Therefore a singleton pattern
was used to implement MIMEStructure. A singleton pattern ensures the creation of only
one instance and provision of a global point to access it [15]. While implementing the
multi-echelon structure, we used a mediator pattern for the Facility and the RepairStation
classes. A mediator (Facility and Repair Station in our framework) facilitates loose
coupling by keeping objects from referring to each other directly, which allows an
![Page 19: OBJECT-ORIENTED MULTI-INDENTURE MULTI-ECHELON SPARE PARTS … · various echelons (levels) in a multi-echelon supply chain network. Spare parts supply chain management deals with](https://reader031.vdocuments.us/reader031/viewer/2022011900/5f0399587e708231d409d8b2/html5/thumbnails/19.jpg)
19
independent interaction between the agents of the Facility and the components of the
RepairStation.
We have used the delegation pattern for implementing the agents of the facility
and the components of the Repair station. The delegation pattern is a method where an
object outwardly expresses certain behaviors for example (facility’s behavior of order
reception) but in reality delegates responsibility for providing that behavior to an
associated object (Order Receiving Agent of Facility). All the agents of a Facility and the
components of the Repair Station are defined as abstract classes. This allows the user to
instantiate a new agent of different behavior and attach to the facility with out altering the
design of the model. Fig. 12 shows the abstract class implementation of the agents of a
Facility. The delegation pattern used for partitioning the system into many agents and the
mediator pattern used for reducing the interconnections between the objects enhances the
reusability of the framework.
EndItemSchedulingAgent OrderReceivingAgent OrderSendingAgent
ShipmentSendingAgentAbs ShipmentReceivingAgentAbs
ShipmentSendingAgentShipmentReceivingAgent
OrderReceivingAgentAbsOrderSendingAgentAbs
ModelElement
EndItemSchedulingAgentAbs
Figure 12 Abstract implementation of the agents of a facility
To simulate the MIME supply chain model, a class named MIMEApplication was
created. MIMEApplication creates a model by instantiating the class Model in the JSL.
![Page 20: OBJECT-ORIENTED MULTI-INDENTURE MULTI-ECHELON SPARE PARTS … · various echelons (levels) in a multi-echelon supply chain network. Spare parts supply chain management deals with](https://reader031.vdocuments.us/reader031/viewer/2022011900/5f0399587e708231d409d8b2/html5/thumbnails/20.jpg)
20
An experiment is then setup for the model by instantiating an Experiment class in the
JSL. The experiment will allow the user to define the simulation parameters such the
replication length, the warm up period and the number of replications. In order to collect
the statistical report for an experiment, the user should turn on the report collection
methods of the Experiment class. Fig. 13 shows the connection between the JSL and the
MIME simulation framework.
Facility
Product
ModelElement
MIMEModelElement
Model
OrderReceivingAgentAbs
MIMEApplication
Figure 13 JSL and MIME simulation framework
3. Framework Testing and Validation
The MIME simulation model was validated by comparing the results with a VARI-
METRIC model [2]. We also simulated two other spare parts supply chain systems,
where we used some of the additional features provided by our framework. The VARI-
METRC example involves a three echelon, three indentured spare part supply chain
system. The first echelon consists of 50 submarines, where each group of 10 is supported
by a ship (the second echelon), that can be accessed in one day. The supply ships have a
39 day average re-supply from the depot (third echelon), when the depot has stock on its
shelf. In this example, it is assumed that item 9 is the same as item 3, item 10 the same as
item 5 and item 11 the same as item 6. Table 2 and Table 3 represent the initial
![Page 21: OBJECT-ORIENTED MULTI-INDENTURE MULTI-ECHELON SPARE PARTS … · various echelons (levels) in a multi-echelon supply chain network. Spare parts supply chain management deals with](https://reader031.vdocuments.us/reader031/viewer/2022011900/5f0399587e708231d409d8b2/html5/thumbnails/21.jpg)
21
parameters for the VARI-METRIC system. The initial parameters such as the product
structure, the echelon structure, the failure time, repair probability and repair time of a
particular product type at each facility etc. are specified in the database. The inventory
policy at every echelon is assumed to be an (S-1, S) policy. Because of the space
limitations, we refer the reader reference [2] for further details of the VARI-METRIC
problem.
Table 2 Repair Probabilities of Product Types at each Echelon.
Item First echelon Repair Probability
Second echelon Repair Probability
Third echelon Repair Probability
1 0.8 0.2 0.5
2 0.6 0.4 0.5
3 0.4 0.5 0.5
4 0.2 0.5 0.5
5 0.2 0.5 0.5
6 0.2 0.6 0.5
7 0.7 0.3 0.5
8 0.5 0.5 0.5
![Page 22: OBJECT-ORIENTED MULTI-INDENTURE MULTI-ECHELON SPARE PARTS … · various echelons (levels) in a multi-echelon supply chain network. Spare parts supply chain management deals with](https://reader031.vdocuments.us/reader031/viewer/2022011900/5f0399587e708231d409d8b2/html5/thumbnails/22.jpg)
22
Table 3 Initial Stock Level and the Demand.
Item
Indenture
Base
Demand
Depot
Stock
Ship 1
Stock
Ship 2
Stock
Ship 3
Stock
Ship 4
Stock
Ship 5
Stock
1 1 0.7 2 0 0 0 0 0
2 2 0.2 1 0 0 0 0 0
3 3 0.1 2 0 0 0 0 0
4 3 0.1 1 0 0 0 0 0
5 2 0.9 10 1 1 1 1 1
6 3 0.1 4 1 1 1 1 1
7 1 1.1 3 0 0 0 0 0
8 2 0.3 2 0 0 0 0 0
The fill rates of the products obtained from the simulation framework and the analytical
model are compared for the validation of the framework. Table 4 represents the analytical
(top cell) and simulation results (bottom cell) of the fill rates at the depot and Table 5
represents the fill rates at the ship. Since fill rate is defined as the percentage of demands
that can be met at the time they are placed, the fill rate at the ships for the product types
with zero inventory are zero. This is the reason why only the fill rates of product type 5
and 6 are provided. For the VARI-METRIC model and the rest of the models discussed
in this section, the simulations were run for 30 replications with replication length of 300
time units and a warm up period of 50 time units. In the simulation results, the values in
the parentheses represent the half width of a 95% confidence interval. Clearly, from
these results we can reproduce the results of the VARI-METRIC problem.
![Page 23: OBJECT-ORIENTED MULTI-INDENTURE MULTI-ECHELON SPARE PARTS … · various echelons (levels) in a multi-echelon supply chain network. Spare parts supply chain management deals with](https://reader031.vdocuments.us/reader031/viewer/2022011900/5f0399587e708231d409d8b2/html5/thumbnails/23.jpg)
23
Table 4 Fill Rates for First Echelon (Depot) Item 1 2 3 4 5 6 7 8
26.82 29.22 46.41 47.64 62.57 62.56 11.74 27.37 Depot
27.6 (0.6) 29.8 (0.6) 46.4 (0.6) 48.2 (0.8) 61.9 (0.7) 61.0(0.7) 11.7 (0.4) 27.1 (0.4)
Table 5 Fill Rates for Second Echelon (Ship) Item Ship 1 Ship 2 Ship 3 Ship 4 Ship 5
53.8 53.8 53.8 53.8 53.8 5
53.4 (0.5) 53.1 (0.5) 53.5 (0.5) 53.3 (0.5) 53.6 (0.5)
83.44 83.44 83.44 83.44 83.44 6
83.3(0.6) 82.5 (0.6) 83.5 (0.6) 83.3 (0.4) 82.9 (0.6)
In order to test some of the features that we have implemented in our framework, we
made two additional models. Among the two models, model 1 is used as the reference
model and model 2 is compared with the results of the model 1 to see the effects of the
changes made.
In model 1, we are using the same multi-echelon structure as that of the VARI-
METRIC model and a different multi-indenture structure. In this model product 8 has two
product 3 (only one in VARI-METRIC model) and product 5 has two product 6 as
subcomponents (only one in VARI-METRIC model). The structure of the products is
illustrated in Fig. 14. The change of structure was easily done by changing the attribute
“quantity” in the BOM table of the database which allows a product to have more than
one subcomponent of the same product type.
![Page 24: OBJECT-ORIENTED MULTI-INDENTURE MULTI-ECHELON SPARE PARTS … · various echelons (levels) in a multi-echelon supply chain network. Spare parts supply chain management deals with](https://reader031.vdocuments.us/reader031/viewer/2022011900/5f0399587e708231d409d8b2/html5/thumbnails/24.jpg)
24
3
5
64
1
2
6 3
5
63
7
8
6
Figure 14 Product structure for model 1
In each submarine, an end item 7 and two end item 1 are set into operation at the
beginning of the simulation. All the three end items will run for randomly generated
operational time. Failure of more than one subcomponents and the end item are possible
in this model. Instead of generating demands for submarines according to the demand
rates as in the VARI-METRIC model, in model 1, demands are created for the failed
subcomponents or the end item after the completion of each operational cycle of the end
item depending upon their respective product states. Hence the demands of failed
products depend on the number of end items allocated to each submarine. In other words,
the more the number of end items operating in a facility the more the demands for the
failed products. The fill rates for the depot are given in Table 6 and Table 7 gives the fill
rates for the ships.
Table 6 Fill Rates for First Echelon (Depot) Item 1 2 3 4 5 6 7 8
Depot 17.2 (0.4) 14.8 (0.5) 33.4 (0.5) 32.3 (0.6) 35.7 (0.5) 49.1 (0.6) 38.8 (0.5) 18.8 (0.4)
![Page 25: OBJECT-ORIENTED MULTI-INDENTURE MULTI-ECHELON SPARE PARTS … · various echelons (levels) in a multi-echelon supply chain network. Spare parts supply chain management deals with](https://reader031.vdocuments.us/reader031/viewer/2022011900/5f0399587e708231d409d8b2/html5/thumbnails/25.jpg)
25
Table 7 Fill Rates for Second Echelon (Ship)
Item Ship 1 Ship 2 Ship 3 Ship 4 Ship 5
5 41.5 (0.4) 41.3 (0.4) 41.5 (0.4) 41.4 (0.4) 41.5 (0.4)
6 70.3 (0.5) 70.5 (0.6) 69.8 (0.7) 70.4 (0.7) 70.3 (0.6)
The explanation of the results of model 1 is given in comparison with the results of model
2 after the following discussion. In model 2, we depict the effects of some of the
attributes which we have been assigned for the product and the resulting state changes the
product will go through during the simulation. As explained in the earlier sections, a
product can fail due to the failure of its subcomponents or failed subcomponents can
make a product partially mission capable and a product may not be removable from its
parent product. These attributes can be set in the BOM table of the database. In model 2,
we discuss the effects of these two attributes by comparing the results with model 1.
In the indenture structure provided in Fig. 14, model 2 assumes that failure of
product 6 will make the product 5 partially mission capable. This model also assumes
that product 3 is a subcomponent not detachable from its parent product 8. Table 8 and 9
shows the fill rates of depot and ships obtained from simulating model 2.
Table 8 Fill Rates for First Echelon (Depot) Item 1 2 3 4 5 6 7 8
Depot 32.9 (0.5) 14.8 (0.3) 84.6 (0.6) 31.8 (0.3) 73.3 (0.5) 63.2 (0.5) 49.3 (0.7) 6.0 (0.2)
![Page 26: OBJECT-ORIENTED MULTI-INDENTURE MULTI-ECHELON SPARE PARTS … · various echelons (levels) in a multi-echelon supply chain network. Spare parts supply chain management deals with](https://reader031.vdocuments.us/reader031/viewer/2022011900/5f0399587e708231d409d8b2/html5/thumbnails/26.jpg)
26
Table 9 Fill Rates for Second Echelon (Ship)
Item Ship 1 Ship 2 Ship 3 Ship 4 Ship 5
5 59.3 (0.4) 59.6 (0.4) 59.4 (0.4) 59.1 (0.5) 59.3 (0.5)
6 71.0 (0.6) 70.3 (0.5) 70.1 (0.5) 70.6 (0.4) 70.8(0.5)
Comparing the two results given in Tables 6, 7 (model 1) and Tables 8, 9 (model 2), the
fill rate at the depot for product 3 is increased from that of model 1 because in model 2,
product 3 was considered as not removable from the parent product 8 in the end item 7
hierarchy. Therefore individual demands for failed product 3 will not occur when product
3 is a subcomponent of product 8, because product 3 is not separable while working as a
subcomponent in product 8. An individual demand for product 3 will occur only when it
is failed, working as a subcomponent of product 2. On the other hand the fill rate at the
depot for product 8 has decreased in model 2 compared to model 1. This is because of the
fact that whenever product 3 is failed we have to replace product 8 instead of replacing
product 3 which is a not removable from the parent product.
In model 1, the demand for product 5 occurs when product 5 is failed due to the
failure of subcomponent 6 and when product 5 fails by itself. In the case of model 2, the
demand for product 5 occurs only when product 5 is failed, because failure of
subcomponent 6 will not cause product 5 to fail but makes product 5 a partially mission
capable product. This result in a reduced demand for product 5 and hence increased the
fill rate of product 5 in model 2 compared to model 1. The fill rate of product 1 and
product 7 (end items) are also increased in model 2 compared to model 1 because in
model 2, the failure of product 6 will only result in making the end items partially
![Page 27: OBJECT-ORIENTED MULTI-INDENTURE MULTI-ECHELON SPARE PARTS … · various echelons (levels) in a multi-echelon supply chain network. Spare parts supply chain management deals with](https://reader031.vdocuments.us/reader031/viewer/2022011900/5f0399587e708231d409d8b2/html5/thumbnails/27.jpg)
27
mission capable. Hence the demands for the end items in model 2 are reduced, resulting
in the increase of fill rate of the end items at the depot. Fill rates of product 6 are
increased in model 2 at both the ships and the depot because when product 6 is failed, it
is taken out from the end item for repair with out affecting the operational capability of
the end items, which hold the product 6. This reduces the failure chance of product 6
thereby increasing the fill rates in model 2 compared to model 1.
4. Summary.
The goal of this research was to develop an object-oriented simulation framework that
captures the fundamental elements for modeling generic spare parts supply chain
networks. The modeling framework was built on an agent plug-in control mechanism
which allows great flexibility for extending and incorporating additional behaviors into
models. This article has described in detail the object-oriented architecture of the
framework and the underlying modeling assumptions. The framework also provides a
well defined database representation for modeling instances.
We illustrated the use of the framework by developing and testing models for
multi-echelon, multi-indenture supply chain systems based on the classic problem
presented in reference [2]. The modeling of such systems is easily accomplished by
changing the database and the results presented clearly demonstrate the potential use for
the framework. In the future, we plan to incorporate part cannibalization and provide
object-oriented primitives for modeling the transportation components of these types of
systems. In addition, agents for more complex scheduling of end-item operation, repair
part dispatching, and transportation planning are planned. This framework will be used
![Page 28: OBJECT-ORIENTED MULTI-INDENTURE MULTI-ECHELON SPARE PARTS … · various echelons (levels) in a multi-echelon supply chain network. Spare parts supply chain management deals with](https://reader031.vdocuments.us/reader031/viewer/2022011900/5f0399587e708231d409d8b2/html5/thumbnails/28.jpg)
28
in the development and testing of MIME spare part inventory models and algorithms. In
addition, the framework can be used to estimate performance of supply chain
configurations. Finally, the models developed from this framework can be embedded in
optimization models for planning the strategic, operational, and tactical execution of
large-scale spare part supply chain networks.
References
1. A. V. Sleptchenko, Integral inventory control in spare parts networks with capacity restrictions doctoral diss., Universiteit Twente (The Netherlands), 2002.
2. C. Sherbrooke, Optimal inventory modeling of systems: multi-echelon techniques (New York: Wiley, 1992).
3. I. R. Hester, Analysis of the effect of centralizing management of mobility readiness spares package assets, Thesis, Air Force Institute of Technology, Ohio, 2001.
4. G. C. Schaefer, J.D. Haas, A simulation model to investigate the impact of health and usage monitoring systems (HUMS) in helicopter operations and maintenance, Proceedings of America Helicopter Society 58th Annual Forum, Montreal, Canada, 2002.
5. M. Cohen, P. V. Kamesam, P. Kleindorfer, H. Lee, & A. Tekrian, Optimizer: IBM’s Multi-Echelon Inventory System for Managing Service Logistics, Interfaces 20 (1), 1990, 65-82.
6. A. M. Law, & W.D. Kelton, Simulation modeling and analysis, (Boston: McGraw-Hill, 2000).
7. M. Dong, Process modeling, performance analysis and configuration simulation in integrated supply chain network design, doctoral diss., Virginia Polytechnic Institute and State University, 2001.
8. R. G. Ingalls, The value of simulation in modeling supply chains, Proc. of Winter Simulation Conference, eds. D. J. Medetros, E. F. Watson, J. S. Carson, and M. S. Manivannan, Washington, DC, 1998, 1371-1375. Institute of Electrical and Electronic Engineers, Piscataway. New Jersey.
9. M. D. Rossetti & H. T. Chan, A Prototype Object-Oriented Supply Chain Simulation Framework, Proc. of Winter Simulation Conference, eds. S. Chick, P. J. Sanchez, D.
![Page 29: OBJECT-ORIENTED MULTI-INDENTURE MULTI-ECHELON SPARE PARTS … · various echelons (levels) in a multi-echelon supply chain network. Spare parts supply chain management deals with](https://reader031.vdocuments.us/reader031/viewer/2022011900/5f0399587e708231d409d8b2/html5/thumbnails/29.jpg)
29
Ferrin, and D. J. Morrice, New Orleans, Louisiana, 2003, 1612-1620. Institute of Electrical and Electronic Engineers, Piscataway. New Jersey.
10. J. M. Swaminathan, S.F. Smith, & N.M. Sadeh, Modeling supply chain dynamics: A multiagent approach, Decision Sciences, 29(3), 1998, 607.
11. W. J. Hopp, & M. L. Spearman, Factory physics: foundations of manufacturing management (Boston: Irwin/McGraw-Hill, 2000).
12. L. Silverston, The data model resource book (New York: Wiley, 2001).
13. J. Jiao, M.M. Tseng, Q. Ma, & Y. Zou, Generic bill-of-materials-and-operations for high-variety production management, Concurrent Engineering Research and Applications 8(4), 2000, 297-321.
14. M. D. Rossetti, B. Aylor, R. Jacoby, A. Prorock, and A.White, Simfone′: An object-oriented simulation framework, Proc. of the Winter Simulation Conference, eds. J. Joines, R. Barton, P. Fishwick, and K. Kang, Orlando, Florida, 2000, 1855-1864. Institute of Electrical and Electronic Engineers, Piscataway. New Jersey.
15. E. Gamma, R. Helm, R. Johnson, & J. Vlissides., Design patterns: elements of reusable object-oriented software (Reading, Mass: Addison-Wesley, 1995).
![Page 30: OBJECT-ORIENTED MULTI-INDENTURE MULTI-ECHELON SPARE PARTS … · various echelons (levels) in a multi-echelon supply chain network. Spare parts supply chain management deals with](https://reader031.vdocuments.us/reader031/viewer/2022011900/5f0399587e708231d409d8b2/html5/thumbnails/30.jpg)
30
Biographies
Manuel D. Rossetti, Ph. D., P. E. is an Associate Professor in the Industrial Engineering
Department at the University of Arkansas. He received his Ph.D. in Industrial and
Systems Engineering from The Ohio State University. Dr. Rossetti has published over
thirty journal and conference articles in the areas of transportation, manufacturing, health
care and simulation and he has obtained over $1.5 million dollars in extra-mural research
funding. His research interests include the design, analysis, and optimization of
manufacturing, health care, and transportation systems using stochastic modeling,
computer simulation, and artificial intelligence techniques. He serves as an Associate
Editor for the International Journal of Modeling and Simulation and is active in IIE,
INFORMS, and ASEE.
Soncy Thomas, M.S.I.E. is an Associate Consultant in Infosys Technologies Ltd. He
received his M.S. in Industrial Engineering from the University of Arkansas and B.Tech.
in Mechanical Engineering from the Kerala University, India. His areas of interest
include computer simulation, and the design, analysis and implementation of supply
chain systems.