o342 m ozone analyser datasheet
TRANSCRIPT
O342m AnalyserUV Absorption Ozone Analyser
Provides accurate O3 measurement in the ranges of 0.4 ppb to 10 ppm
The O342M analyser combines years of experience of a wide range of
analysers with an enhanced electronics package to produce the most
advanced solution for ambient air monitoring
Free from Interference The MMS is composed of autonomous modules based on their analysis
1. Chemiluminescence (NO, NO2, NOx)
2. UV Photometry (O3)
3. IR Gas Filter Correlation (CO, CO2)
4. UV Fluorescence (SO2)
Advanced Technology for Multitasking Operation Multitasking software allows advanced calculation such as wind
direction averaging and gives user-friendly access to the instrument
set-up, as well as the status and maintenance parameters. Users also
have the freedom to access to real-time synoptics, auto-diagnostics and
maintenance data screens.
KEYFEATURES
• User programmable ranges and average
times
• Full remote emulation of the analyser
• Built-in USB port and serial interface for
full remote control and display
• Built-in storage of 12 months 1/4 h
average data
• Interactive menu-driven display
• Real-time calibration graphs
Continuous & accuratemeasurement of O3 in
ambient air “ “
GASESANALYSED
O3
11 Ark Royal Way, Lairdside Technology Park, Tranmere, Wirral, CH41 9HTT: +44(0)151 666 8300 F: +44(0)151 666 8329 E: [email protected] W: www.a1-cbiss.com Buy Online: shop.a1-cbiss.com
Cert No. 996ISO 9001
TECHNICALSPECIFICATION
APPLICATIONS• Continuous indoor and outdoor air quality monitoring
• Stationary and mobile AQMS laboratories
• Industrial fence-line monitoring
• Continuous emissions monitoring (CEM) by dilution
• Laboratory and field studies on ozone effects
PHYSICAL • Dimensions: (L x W x H): 483 x 545 x 133 mm
• Weight: 9kg (19.9 lbs)
POWER • Power supply: 230v / 50 Hz or 115 V / 60 Hz
• Power consumption: 70 VA approx
CERTIFICATIONS• TUV report no 936/21205818/D
MEASUREMENT • Ranges: programmable from 0- 0.1 / 0.2 / 0/5 / 1 / 2 / 5 /
10ppm
• Lower detectable limit: <0.4 ppb
• Zero drift: less than 1 ppb / week
• Span drift: less than 1% / week
• Linearity: ± 1% of full scale
Complete Project Solutions
• Expert consultancy • Project management • In-house project design & build • Installation & commissioning
• After product service & support
Our complete project solutions are developed to assist you in IED compliance. We achieve this through;
Find a1-cbiss on: