nuiments - a-technologies.com · competition equipments- duraflex springboards and stands...
TRANSCRIPT
w w w . a - t e c h n o l o g i e s . c o m
Competiti
on
Equipme
nts
w w w . a - t e c h n o l o g i e s . c o m
Competiti
on
Equipme
ntsGeneral Information
Duraflex Springboards and Stands
Starting Blocks
Lane Ropes
Lane Rope Accessories
Indicators
Anchors
190
192
196
197
198
199
199
Competition Equipments
189
w w w . a - t e c h n o l o g i e s . c o m
Competition equipmentS- General information
Position of the Various Equipment used in Competition Pools
190
w w w . a - t e c h n o l o g i e s . c o m
Competition equipmentS- General information Competition equipmentS General information
Facilities Rules - FR 2.13 Lane Marking (Rules as of Jan 2008. Subject to change by FINA)
Width of lane markings, End Line, Targets A 0.25m±0.50Length of End Wall Targets B 0.50M
Depth to center of End wall Targets C 0.30M
Length of Lane Marker Gross Line D 1.00M
Width of Racing Lanes E 2.50M
Distance from End of Lane to End Wall F 2.00M
Touch Pad G 2.40 X 0.90 X 0.01M
191
w w w . a - t e c h n o l o g i e s . c o m
Competition equipmentS- Duraflex Springboards and Stands
The diving board Duraflex, Maxi-Flex and Maxiflex model “B” is made of aluminium extrusion type springboard.
The underside extrusion ribs in the fulcrum area is protected with specially formed rubber channels attached to the board with epoxy adhesive.
The Maxi-Flex is manufactured in 16 ft. lengths only. Materials and construction are identical to the regular 16 ft. Duraflex, except for the double taper, plus two extrusions at the bolt attach points that restore original thick-ness at bolt holes. Whereas the regular Duraflex, has a machine taper from tip to fulcrum, the Maxi-Flex, is also machine tapered from fulcrum to anchor.The Maxi-Flex, Model “B” materials and construction are identical to the regular 16 ft. Maxi-Flex, except for the perforations. There are approximately 200 perforations measuring approximately 1.5 inches long and .25 inch wide, extending 21 inches back from the tip end of the board.
DuRAFLEX ALuMInIuMDIvInG BoARD
Code Length “A”(mm)
Thickness Bolt Size Shipping Weight
Duraflex DivinGboarD66-231-324 14᾿ 63" 2" 5/8" 140
66-231-326 16᾿ 78" 2" 5/8” 145
maxiflex DivinGboarD66-231-328 16᾿ 73" 1᾿" 5/8" 145
66-231-330 (Model “B) 16᾿ 73" 1᾿” 5/8” 145
Duraflex springboards have been exclusively used in all summer Olympics since Rome 1960; also used in all international competition around the world since 1960.
The only board aproved by FINA for
world championships
(Model “B) 16᾿
Maxiflex Diving Board(Model “B) 16᾿
192
w w w . a - t e c h n o l o g i e s . c o m
Competition equipmentS- Duraflex Springboards and Stands Competition equipmentS Duraflex Springboards and Stands
Durafirm® supporting structures for springboards are the result of design engineering focused on:Stability, Low noise Level, Safety and Ease of Installation on new or existing decks.All structural members are heavy aluminum castings. All working parts are heat treated, high strength alu-minum forgings or extrusions, treated with Alcoa Duranodic@ “hard” anodize process.Roller, slide and hinge bearings are field replaceable nylon, adjustable for wear.
Durafirm@ Short Stands have fulcrum units identical to the one and Three Meter Stands and similar guard rails and anchoring units. They are designed for use on concrete supports or platforms at either one or Three meter level.
Specifications:
• The “Durafirm” Diving stand anchor and fulcrum assembly
• Designed for mounting on concrete, steel or other field fabricated diving platform
• Diving stand in heavy aluminium casting, coated with epoxy
• Roller tube and tracks in heat treated extruded Aluminium, hard anodized
• Bearings for the roller tube and slide in nylon with grease path
• Diving board anchor hinges are heat treated aluminum forgings with design tensile strength of 35,000 PSI
and is hard anodized
• Diving board anchor bolts are 5/8” diameter x 3½” long Silicon Bronze
• Diving Stand supplied A. Without guard rails) B. With top and intermediate guard rails on two sides C. Top
guard rail only on two sides D. Top guard rail on one side only
• Diving stand guard rails in Stainless Steel tubin, firmly attaced to the guard rail supports with Stainless
Steel band fasteners
• The rails extend to the edge of the swimming pool and the rail ends are fitted with safety
• The stand is designed for mounting on new concrete platform with 6nos. “Durafirm” # 70-231-900
• Bronze deck anchors
DuRAFIRM®
DIvInG BoARD STAnDS
DuRAFIRM®
ShoRT STAnDS
Durafirm® units were chosen for
all Olympics since Mexico 1968.
193
w w w . a - t e c h n o l o g i e s . c o m
Competition equipmentS- Duraflex Springboards and Stands
The one meter “Durafirm” stands are available with double guard rails on two sides. “one Meter” stands like the “Three Meter” units have hinged board anchors.
“one Meter” structures are manufactured in five different heights to accommodate pools with deck-to-water level dimensions from 0” to 13” (within uS Diving tolerance: 1M+2). Deck-to-water level dimension of the pool must be indicated at time of placing order.
onE METER STAnDS
Specifications:
• one meter “Durafirm” Diving stand. height +5%
• Diving stand in heavy aluminum casting, coated with epoxy
• Roller tube and tracks in heat treated extruded Aluminum, hard anodized
• Bearings for the roller tube and slide in nylon with grease path
• Diving board anchor hinges are heat treated aluminum forgings with design tensile strength of 35,000 PSI and is hard anodized
• hinges are mounted on transverse casting allowing 7 leveling positions in one inch increments
• Diving board anchor bolts are 5/8” diameter x 3½” long Silicon Bronze
• Diving Stand is supplied with; A. Top and intermediate guard rails on two sides. B. Top guard rail on one side only
• Diving Stand guardrails in S.S. tubing, firmly attached to the guard rail supports with S.S. band fasteners.
• The rails extend to the edge of the swimming pool and the rail ends are fitted with safety
• The Stand is designed for; A. mounting on new deck with 8nos. “Durafirm” Bronze deck anchors or B. mounting on existing decks with 8nos. through rods (if workspace below) or 12nos. expansion inserts
70-231-400
194
w w w . a - t e c h n o l o g i e s . c o m
Competition equipmentS- Duraflex Springboards and Stands Competition equipmentS Duraflex Springboards and Stands
The Three Meter “Durafirm” Stands are manufactured with similar components to the one Meter Stands. All structural parts are individually coated with a coat of baked epoxy. All fasteners are corrosion resistant aircraft Aluminum alloy with epoxy coating except the deck hold down bolts which are Silicon Bronze. The most important feature of the Three Meter “Durafirm” is the simple 8 point deck and anchorage, which requires no special footing and can be installed on an existing deck, if concrete is of good quality and no less than 5” thick. The guard rails are in Stainless Steel tubing secured to the structure with Stainless Steel strap clamps. Fulcrum bearings are nylon and are adjustable to wear. Grease ports on roller blocks allow lubrication of the roller and side bearings. The hinge and rear support assembly is adjustable vertically in seven 1” increments which makes it possible to level the board on different deck slopes. The Three Meter Board is available in only one model with double guard rails on both sides. The stand is manufactured in three different heights to accommodate deck level to water level dimensions of 0” to 13” (within uS Diving tolerance: 1M+2 3/8”)
ThREE METER STAnDS
Specifications:
• Three Meter “Durafirm” Diving stand. height +2%
• Diving stand in heavy aluminium casting, coated with epoxy
• Roller tube and tracks in heat treated extruded Aluminium, hard anodized
• Bearings for the roller tube and slide in nylon with grease path
• Diving board anchor hinges are heat treated aluminium forgings with design tensile strength of 35,000 PSI and is hard anodized
• hinges are mounted on transverse casting allowing 7 leveling positions in one inch increments
• Diving Stand guardrails in S.S. tubing, firmly attached to the guard rail supports with S.S. band fasteners
• The Stand includes top and intermediate rails on both sides of the stand
• The stand is designed for; A. mounting on new deck with 8nos. “Durafirm” Bronze deck anchors or
B. mounting on existing deck with 8nos. through rods (if workspace below) or 12nos. expansion inserts
Code Description Shipping Weight
Durafirm Short StanDS70-231-520 Stand with double guard rails on two sides 335
70-231-524 Stand without guard rails 125
one meter StanDS70-231-400 Stand with double guard rails on two sides 420
three meter StanDS70-231-300 Stand with double guard rails on two sides 675
anChor materialS70-231-900 Bronze deck anchor 2
70-231-902 Concrete inserts -
195
w w w . a - t e c h n o l o g i e s . c o m
Competition equipmentS- Starting Blocks
Code Height Kg m3 U13034080 400 mm 17.8 0.179 x1
Code Kg m3 U13034081 4.25 0.018 x1
Totally manufactured in AISI-316L.
500x500 mm non slip platform.
numbering not included.
needs anchor.
anChor
StartinG bloCk numberS
STARTInG BLoCkAT-Bo7
hIGh STARTInG BLoCk
LoW STARTInG BLoCk
SIMPLIFIED LoW STARTInG BLoCk
Stainless steel starting block with a nominal height of 700mm., with an adjustable, handle and plate support, slip resistant platform in fibreglass. Stainless steel screws and adhesive numbers included.
Code Desc.13039060 from 1-6
13039061 from 1-10
Code Kg m3 U13034082 32 0.36 x1
Code Kg m3 U13034083 18 0.11 x1
Code Kg m3 U13034084 18 0.11 x1
Stainless steel starting block with a nominal height of 400mm, with a platform, handle and support plate that is fully adjustable. Platform in slip resistant fibre-glass. Electro-polishing treatment to guarantee high, long lasting resistance to corrosion. Adhesive num-bers and stainless steel screws inclulded.
Stainless steel starting block with a nominal height of 400mm, with an adjustable, slip resistant platform in fibreglass. Fixed handle. Electro-polishing treatment to guarantee high resistance to corrosion. Fastening system inside column.Stainless steel screws and adhesive numbers included.
196
w w w . a - t e c h n o l o g i e s . c o m
Competition equipmentS- Starting Blocks Competition equipmentSLane Ropes
Code Description Cable Lenght(m)
13039075 roma 25 m 30
13039076 roma 50 m 60
13039077 Moscow 25 m 30
13039078 Moscow 50 m 60
Code Description Cable Lenght(m)
13039092 Speedy 25 m 30
13039093 Speedy 50 m 60
Code Description Cable Lenght(m)
13039094 flat lane 25 m 30
13039095 flat lane 50 m 60
our new Easy Lane stainless steel 6mm cable with PP disks, in colours red, white yellow, blue and green pursuant to FInA standards. Disks with diameter 89mm (Roma) and 148mm (Moscow).
our SPEEDY PooL stainless steel 18/8 cable with a 4mm diameter (7x7 formation =49 wires), maximum load 980 kg, plasticised, 6mm diameter in transparent PvC, PP disks, in colours red, white yellow, blue and green pursuant to FInA standards. Disks with 120mm diameter.
our FLAT LAnE stainless steel 18/8 cable with a 4mm diam-eter (7x7 formation =49 wires), maximum load 980 kg, plasti-cised, 6mm diameter in transparent PvC, PP disks, in colours red, white yellow, blue and green pursuant to FInA standards. Disks with 150mm diameter.
ATECPooL SPEEDY PooL
ATECPooL FLAT LAnES
Roma
Moscow
ATECPooL nEW EASY LAnE
197
w w w . a - t e c h n o l o g i e s . c o m
Competition equipmentS- Lane Rope Accessories
Code Kg m3
13037082 0.75 0.0013
Code Kg m3
13037083 0.75 0.0013
Code Kg m3
13037081 0.30 0.0006
Code Kg m3
13039079 0.97 0.0021
Code Desc. a b c Kg m3
13037071 1200 mm 1590 1200 1150 9.0 0.07
13037072 1800 mm 2190 1800 1750 13.0 0.09
Model 1200(mm)
1800(mm)
rome 25 m 6 10
rome 50 m 4 6
Moscow 25 m 4 6
Moscow 50 m 2 3
CapaCity
LAnE RoPE RoLLER
LAnE RoPE TEnSIonER
LAnE RoPE SuPPoRT
FLooR FASTEnInGSuPPoRT
Totally manufactured in AISI-316L.
Chromed Bronze and stainless steel construction
Made in stainless steel AISI-316
height: 150mmØ: 43mm
Complete stainless steel floor fastening support
height 110mm (gross) for use with floor fastening (100mm. net size) with stainless steel screws, stainless steel floor fastening included.
LAnE RoPE TEnSIon SPRInG
Made in stainless steel AISI-304
198
w w w . a - t e c h n o l o g i e s . c o m
Anchors
Code Kg m3
13030015 0.75 0.0013
Code Kg m3
13030016 0.75 0.0013
Competition equipmentSIndicators
BACkSTRokE TuRn InDICAToR
FALSE START InDICAToR
LAnE RoPE AnChoR
LAnE RoPE AnChoR
Made in stainless steel AISI-316
Floor fastening base for lanes
height: 126mmBase Ø: 75mmTop Ø: 95mm
Made in stainless steel AISI-316
Wall fastening for lanes
(reinforced concrete)
Code Kg m3
13034091 6.5 0.03
Code Description13039073 12.5 m
13039074 25.0 m
Set of 2 posts
kit rope with floats
Anchor not included
Code Description13039050 12.5 m
13039053 25.0 m
kit rope with pennant
With stainless steel tubes with a diameter of 43mm, a thickness of 1.5mm. Polyester rope and thick PvC flags in red (4 nos -every meter).
With stainless steel tubes with a diameter of 43mm, a thickness of 1.5mm.Supplied with Polyester cord and floats.
Code Kg m3
13034090 6.9 0.011
Set of 4 posts
199